Use of Cassava Wastewater and Scheelite Residues in Ceramic Formulations 3030587819, 9783030587819
This book presents original results on the use of cassava wastewater as a substitute for potable water in ceramic formul
159 20 5MB
English Pages 116 [119] Year 2020
Table of contents :
Contents
Cassava Wastewater: An Introduction, Characterization and Potential
References
Soil-Cement Brick with Cassava Wastewater
1 Introduction
2 Used Materials
2.1 Soil
2.2 Cement
2.3 Water
2.4 Cassava Wastewater
3 Methodology
3.1 Materials Characterization
3.2 Molding and Curing of the Bricks
3.3 Simple Compressive Strength Test
3.4 Water Absorption Test
3.5 Durability Test by Immersion and Drying
3.6 Mineralogical Analysis of the Compositions
3.7 Scanning Electron Microscopy (SEM)
4 Results and Discussions of the Characterization of Materials
4.1 Soil Characterization
4.2 Cement Characterization
4.3 Cassava Wastewater Characterization
5 Results and Discussions of Technological Tests
5.1 Simple Compressive Strength
5.2 Water Absorption
5.3 Modified Durability
6 Results and Discussions of Microstructural Tests
6.1 Mineralogical Analysis by XRD
6.2 Scanning Electron Microscopy (SEM)
7 Conclusions
References
Ecological Brick of Mineral Residues and Cassava Wastewater
1 Introduction
2 Residues in Soil-Cement Bricks
3 Used Materials
3.1 Solid Residues
3.2 Cassava Wastewater
4 Methodology
5 Results and Discussion
5.1 Residues Characterization
5.2 Packing Analysis
5.3 Simple Compressive Strength
5.4 Water Absorption
5.5 Modified Durability
5.6 Fracture Surface Analysis
6 Analysis of the Combination of Solid Residues, Cassava Wastewater, and Cement
7 Conclusions
References
Mortar Produced with Scheelite Residue and Cassava Wastewater
1 Introduction
2 Utilized Materials
2.1 Aggregates
2.2 Cement
2.3 Lime
2.4 Water
2.5 Cassava Wastewater
3 Methodology
3.1 Molding and Curing of Specimens
3.2 Testing Mortars in the Fresh State
3.3 Testing of Mortars in the Hardened State
4 Results
4.1 Aggregates
4.2 Binders
4.3 Cassava Wastewater
4.4 Chemical and Mineralogical Analysis of Materials
4.5 Testing Mortars in the Fresh State
4.6 Testing Mortars in the Hardened State
5 Conclusions
References
Earthbag Construction System with Cassava Wastewater
1 Introduction
2 Earth Construction Techniques
3 Cassava Wastewater
4 Methodology
4.1 First Phase
4.2 Second Phase
5 Results and Discussions
5.1 Characterization of the Soil and the Cassava Wastewater
5.2 Technological Tests
6 Thermo-acoustic Evaluation of the System
6.1 Thermal Evaluation of Construction Systems
6.2 Acoustic Evaluation of Systems
7 Conclusion
References
Contents
Cassava Wastewater: An Introduction, Characterization and Potential
References
Soil-Cement Brick with Cassava Wastewater
1 Introduction
2 Used Materials
2.1 Soil
2.2 Cement
2.3 Water
2.4 Cassava Wastewater
3 Methodology
3.1 Materials Characterization
3.2 Molding and Curing of the Bricks
3.3 Simple Compressive Strength Test
3.4 Water Absorption Test
3.5 Durability Test by Immersion and Drying
3.6 Mineralogical Analysis of the Compositions
3.7 Scanning Electron Microscopy (SEM)
4 Results and Discussions of the Characterization of Materials
4.1 Soil Characterization
4.2 Cement Characterization
4.3 Cassava Wastewater Characterization
5 Results and Discussions of Technological Tests
5.1 Simple Compressive Strength
5.2 Water Absorption
5.3 Modified Durability
6 Results and Discussions of Microstructural Tests
6.1 Mineralogical Analysis by XRD
6.2 Scanning Electron Microscopy (SEM)
7 Conclusions
References
Ecological Brick of Mineral Residues and Cassava Wastewater
1 Introduction
2 Residues in Soil-Cement Bricks
3 Used Materials
3.1 Solid Residues
3.2 Cassava Wastewater
4 Methodology
5 Results and Discussion
5.1 Residues Characterization
5.2 Packing Analysis
5.3 Simple Compressive Strength
5.4 Water Absorption
5.5 Modified Durability
5.6 Fracture Surface Analysis
6 Analysis of the Combination of Solid Residues, Cassava Wastewater, and Cement
7 Conclusions
References
Mortar Produced with Scheelite Residue and Cassava Wastewater
1 Introduction
2 Utilized Materials
2.1 Aggregates
2.2 Cement
2.3 Lime
2.4 Water
2.5 Cassava Wastewater
3 Methodology
3.1 Molding and Curing of Specimens
3.2 Testing Mortars in the Fresh State
3.3 Testing of Mortars in the Hardened State
4 Results
4.1 Aggregates
4.2 Binders
4.3 Cassava Wastewater
4.4 Chemical and Mineralogical Analysis of Materials
4.5 Testing Mortars in the Fresh State
4.6 Testing Mortars in the Hardened State
5 Conclusions
References
Earthbag Construction System with Cassava Wastewater
1 Introduction
2 Earth Construction Techniques
3 Cassava Wastewater
4 Methodology
4.1 First Phase
4.2 Second Phase
5 Results and Discussions
5.1 Characterization of the Soil and the Cassava Wastewater
5.2 Technological Tests
6 Thermo-acoustic Evaluation of the System
6.1 Thermal Evaluation of Construction Systems
6.2 Acoustic Evaluation of Systems
7 Conclusion
References
![Use of Cassava Wastewater and Scheelite Residues in Ceramic Formulations [1st ed.]
9783030587819, 9783030587826](https://ebin.pub/img/200x200/use-of-cassava-wastewater-and-scheelite-residues-in-ceramic-formulations-1st-ed-9783030587819-9783030587826.jpg)
![Advances in Ceramic Armor VII: Ceramic Engineering and Science Proceedings [1 ed.]
1118059905, 9781118059906](https://ebin.pub/img/200x200/advances-in-ceramic-armor-vii-ceramic-engineering-and-science-proceedings-1nbsped-1118059905-9781118059906.jpg)
