302 33 3MB
English Pages 14 Year 1988
ficlse 26)4 8, BEBO TKONIC
OPERATING GUIDE
WELCOME TO THE SPECTACULAR SOUND CUSTOM DESIGNED FOR YOUR NEW FORD With the Ford Audio System you have selected, you can be confident of quality high-fidelity sound specifically designed for the acoustics of your new vehicle. Ford expertise in electronics and audio engineering speaks for itself with over 50 years of audio design. In addition, Ford maintains one of the most technically advanced audio development and test facilities in the world. To help you enjoy all the features of your Ford Audio System, please take a few moments to familiarize
yourself with the information on the following pages.
ELECTRONIC AM/FM STEREO RADIO WITH CASSETTE TAPE PLAYER The ELECTRONIC
SEARCH
RADIO
ELECTRONIC AM/FM STEREO RADIO
is
offered in four different configurations: * AM/FM Graphic * AM/FM * AM/FM
Stereo with Cassette Tape Player and Equalizer Stereo with Cassette Tape Player Stereo
This unit includes all the features and controls shown
above, except those pertaining to the cassette player. The audio controls on the right side of the panel are repositioned.
* AM NOTE: A Mechanically tuned AM radio is also available on certain vehicles,
-——))
at tel ;
plele
es)
JS
2
BASS
S43 =
a
&
i |DIED |SI
A
|
TREBLE
=
1D TAPE DOOR
—_ BASS
TREBLE
O
|e]
| 3
|
fe
we THT
= te + Wot Fey g sy lst 0
om
S|
CO) ele
@ FM switcn
LOCAL/DISTANT
ON
uD
CES
-——@ MANUAL TUNE =
ase D
SeEK 3]
Ci)
BALANCE
FADE
®
D
Rey
S =
_®
FAST REWIND
|4B
FAST FORWARD
| © TAPE REVERSE LB
DOLBY®
B
NOISE REDUCTION
—___—__}__49) FADE CONTROL BALANCE CONTROL
DOLBY® B LOCAL
é) cuca
INDICATOR
MEMORY
INDICATOR
PRESETS
@ TAPE DIRECTION INDICATOR
L__-——_@) TREBLE CONTROL
—)
BASS CONTROL
Dolby® is a Registered Trademark of Dolby Laboratories Licensing Corp.
Paige MONEE. Cou Dat Dy MHL
oe el
without incurring obligation. A similar version with slightly different controls may be supplied as an alternate to this radio.
3
ELECTRONIC AM/FM STEREO RADIO WITH CASSETTE TAPE PLAYER — OPERATING PROCEDURES The radio will stop only on stronger (local) stations. To
STATION TUNING
eam
meuianankele@ @) — Press to turn the
radio on, press again to turn it off. To increase the volume, rotate the control clockwise. NOTE: If the radio contains the clock feature, rotate the volume control
clockwise to turn the radio on. Pushing the control
causes the display to switch between the radio frequency and clock. The Electronic Search Radio has three tuning methods for your convenience: MANUAL
TUNE
@
—
Press the right (+) side of the
switch for a higher frequency, and press the left (-) side of the switch for a lower frequency. Lightly pressing and releasing the switch will move the frequency band up or down at a slower rate. Holding the switch down for half a second or longer will change frequencies rapidly.
SEEK TUNE
e
— The seek rocker switch can be
seek both stronger and weaker (distant) stations, press the local/distant switch again. LOC will disappear from the display and the radio will now stop on stronger and weaker stations. NOTE: The L/D switch does not change reception of a station. It only permits the selection of stronger (local) or stronger and weaker (distant) stations when using the seek function only.
STATION FREQUENCY/CLOCK DISPLAY @ The selected frequency or clock will appear in the
_
display (if clock feature is present). AM SWITCH @ — Press to select AM access the six AM memory presets.
FM SWITCH
e-
mode and to
Press to select FM mode. Pressing
again will alternate between FM1 six memories in each.
Peg
and FM2,
accessing the
G) — The selected radio
used to automatically select the next listenable station up or down the frequency band. First, push the Local/Distant button oO. LOC will appear in the display ® and the radio will stop only on stronger (local) stations. To seek both stronger and weaker (distant) stations, press the Local/Distant button. LOC will
band will appear in the display.
disappear and the radio will stop on both stronger and weaker stations. Then, pressing the right ( P>) side of the seek switch will select a higher frequency, and pressing the left (