Sargeant & Greenleaf R-6720 R-6725 R-6730 R-6735 Right Hand Combination Lock Operating Instructions

Citation preview

OPERATING

INSTRUCTIONS

RIGHT HAND 3-NUMBER COMBINATION LOCK

SARGEANT & GREENLEAF INC. R-6720 - R-6725 - R-6730 - R-6735

CHUBB-MOSLER

AND

BRAMPTON, Offices:

TAYLOR

SAFES

LTD.

ONTARIO

VANCOUVER, CALGARY, TORONTO, MONTREAL,

SASKATOON, WINNIPEG QUEBEC CITY

F.3005

Rev.

10/62

RIGHT

HAND

COMBINATION

Operating

LOCK

Instructions

SARGEANT & GREENLEAF INC. - R-6735 R-6720 - R-6725 - R-6730

Read

these

or changing Your security unit can be “Counter-Spy’’ dial (Figure

NOTE:

1

GENERAL

fitted with 2). These

a standard instructions

DER

OPENING INDEX

-

STANDARD

DIAL

the

lock

the combination.

CHANGING

CHANGING

FIGURE

before operating

instructions thoroughly

FIGURE

2

-

dial (Figure 1) or a apply to either type.

Bee

‘‘COUNTER

IG INDEX

SPY”

DIAL

INFORMATION

At the top of the dial ring an epening index is provided for normal dialing INDEX At the left side of the opening index a CHANGING and opening. is provided for use when setting a new combination. This is a precision lock and extreme care must be used to align the combination numbers with the index. If, after turning the correct number of Turn the dial slowly and steadily. the opening index the entire series beyond revolutions, any number is turned TO BACK DO NOT TURN of combination numbers must be re-dialed. a time Each . NUMBERS THE WITH ALIGNMENT A PROPER REGAIN counted. is selected number is aligned with the opening index a revolution

51-79-44 THE

COMBINATION The

above

LOCK

combination

may

It is important that the as possible, to maintain

TO

3.

Turn dial to with opening Turn dial to aligned with Turn dial to aligned with

4.

srt

wn

standard,

stock,

be

combination security.

be

ON

20 - 40 - 60

factory

changed

to

numbers.

new

numbers,

as

soon

Turn

dial

the LEFT (), stopping when aligned with the CHANGING INDEX the third

LEFT

combination

the second time.

(€), aligns

number

is

Turn dial to the LEFT (“€) stopping when the third number is aligned with the CHANGING INDEX the second time. Leaving the dial in this position turn the changing key back to the RIGHT (») and remove it. The

new

CLOSING opening

combination

THE

DOOR

you

try

have

the

chosen

new

is now

set

combination

in

the

several

lock

times

—-

BEFORE

using

the

index.

If an error has been made, and/or locking mechanism fails to operate, we suggest an accredited locksmith be called. Do not tamper with the lock.