Quantum chemistry of solids: the LCAO first principles treatment of crystals [1 ed.] 3540487468, 9783540487463, 9783540487487

Quantum Chemistry of Solids delivers a comprehensive account of the main features and possibilities of LCAO methods for

320 25 6MB

English Pages 558 Year 2007

Report DMCA / Copyright

DOWNLOAD PDF FILE

Recommend Papers

Quantum chemistry of solids: the LCAO first principles treatment of crystals [1 ed.]
 3540487468, 9783540487463, 9783540487487

  • 0 0 0
  • Like this paper and download? You can publish your own PDF file online for free in a few minutes! Sign Up
File loading please wait...
Citation preview

Springer Series in

solid-state sciences

153

Springer Series in

solid-state sciences Series Editors: M. Cardona P. Fulde K. von Klitzing R. Merlin H.-J. Queisser H. St¨ ormer The Springer Series in Solid-State Sciences consists of fundamental scientific books prepared by leading researchers in the field. They strive to communicate, in a systematic and comprehensive way, the basic principles as well as new developments in theoretical and experimental solid-state physics. 138 Phase Separation in Soft Matter Physics Micellar Solutions, Microemulsions, Critical Phenomena By P.K. Khabibullaev and A.A. Saidov 139 Optical Response of Nanostructures Microscopic Nonlocal Theory By K. Cho 140 Fractal Concepts in Condensed Matter Physics By T. Nakayama and K. Yakubo 141 Excitons in Low-Dimensional Semiconductors Theory, Numerical Methods, Applications By S. Glutsch 142 Two-Dimensional Coulomb Liquids and Solids By Y. Monarkha and K. Kono 143 X-Ray Multiple-Wave Diffraction Theory and Application By S.-L. Chang 144 Physics of Transition Metal Oxides By S. Maekawa, T. Tohyama, S.E. Barnes, S. Ishihara, W. Koshibae, and G. Khaliullin 145 Point-Contact Spectroscopy By Y.G. Naidyuk and I.K. Yanson 146 Optics of Semiconductors and Their Nanostructures Editors: H. Kalt and M. Hetterich

147 Electron Scattering in Solid Matter A Theoretical and Computational Treatise By J. Zabloudil, R. Hammerling, L. Szunyogh, and P. Weinberger 148 Physical Acoustics in the Solid State By B. Lüthi 149 Solitary Waves in Complex Dispersive Media Theory · Simulation · Applications By V.Yu. Belashov and S.V. Vladimirov 150 Topology in Condensed Matter Editor: M.I. Monastyrsky 151 Particle Penetration and Radiation Effects By P. Sigmund 152 Magnetism From Fundamentals to Nanoscale Dynamics By H.C. Siegmann and J. Stöhr 153 Quantum Chemistry of Solids The LCAO First Principles Treatment of Crystals By R.A. Evarestov 154 Low-Dimensional Molecular Metals By N. Toyota, M. Lang and J. Müller

Volumes 91–137 are listed at the end of the book.

Robert A. Evarestov

Quantum Chemistry of Solids The LCAO First Principles Treatment of Crystals

With 78 Figures and 126 Tables

123

Professor Dr. Robert A. Evarestov St. Petersburg State University Chemistry Department Stary Peterghof University Prospect 26 198504 St. Petersburg, Russia E-mail: [email protected]

Series Editors:

Professor Dr., Dres. h. c. Manuel Cardona Professor Dr., Dres. h. c. Peter Fulde∗ Professor Dr., Dres. h. c. Klaus von Klitzing Professor Dr., Dres. h. c. Hans-Joachim Queisser ¨r Festko ¨rperforschung, Heisenbergstrasse 1, 70569 Stuttgart, Germany Max-Planck-Institut fu ∗ Max-Planck-Institut fu ¨r Physik komplexer Systeme, No ¨thnitzer Strasse 38 01187 Dresden, Germany

Professor Dr. Roberto Merlin Department of Physics, 5000 East University, University of Michigan Ann Arbor, MI 48109-1120, USA

Professor Dr. Horst St¨ ormer Dept. Phys. and Dept. Appl. Physics, Columbia University, New York, NY 10027 and Bell Labs., Lucent Technologies, Murray Hill, NJ 07974, USA

Library of Congress Control Number: 2006936622

ISBN 978-3-540-48746-3 Springer Berlin Heidelberg New York This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilm or in any other way, and storage in data banks. Duplication of this publication or parts thereof is permitted only under the provisions of the German Copyright Law of September 9, 1965, in its current version, and permission for use must always be obtained from Springer. Violations are liable to prosecution under the German Copyright Law. Springer is a part of Springer Science+Business Media springer.com © Springer-Verlag Berlin Heidelberg 2007 The use of general descriptive names, registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Typesetting: Digital data supplied by authors Production: LE-TEX Jelonek, Schmidt & Vöckler GbR, Leipzig Cover production: Manfred Bender, WMX Design GmbH, Heidelberg SPIN 11555100 Printed on acid-free paper 57/3100/YL - 5 4 3 2 1 0

This book is dedicated to my teacher and friend Professor Marija I. Petrashen

Preface

Nobel Prize Winner Prof. Roald Hoffmann forewarding a recently published book by Dronskowski [1] on computational chemistry of solid-state materials wrote that one is unlikely to understand new materials with novel properties if one is wearing purely chemical or physical blinkers. He prefers a coupled approach – a chemical understanding of bonding merged with a deep physical description. The quantum chemistry of solids can be considered as a realization of such a coupled approach. It is traditional for quantum theory of molecular systems (molecular quantum chemistry) to describe the properties of a many–atom system on the grounds of interatomic interactions applying the linear combination of atomic orbitals (LCAO) approximation in the electronic-structure calculations. The basis of the theory of the electronic structure of solids is the periodicity of the crystalline potential and Blochtype one-electron states, in the majority of cases approximated by a linear combination of plane waves (LCPW). In a quantum chemistry of solids the LCAO approach is extended to periodic systems and modified in such a way that the periodicity of the potential is correctly taken into account, but the language traditional for chemistry is used when the interatomic interaction is analyzed to explain the properties of the crystalline solids. At first, the quantum chemistry of solids was considered simply as the energy-band theory [2] or the theory of the chemical bond in tetrahedral semiconductors [3]. From the beginning of the 1970s the use of powerful computer codes has become a common practice in molecular quantum chemistry to predict many properties of molecules in the first-principles LCAO calculations. In the condensedmatter studies the accurate description of the system at an atomic scale was much less advanced [4]. During the last 10 years this gap between molecular quantum chemistry and the theory of the crystalline electronic structure has become smaller. The concepts of standard solid-state theory are now compatible with an atomic-scale description of crystals. There are now a number of general-purpose computer codes allowing prediction from the first-principles LCAO calculations of the properties of crystals. These codes are listed in Appendix C. Nowadays, the quantum chemistry of solids can be considered as the original field of solid-state theory that uses the methods of molecular quantum chemistry and molecular models to describe the different properties of solid materials including surface and point-defect modeling.

VIII

Preface

In this book we have made an attempt to describe the basic theory and practical methods of modern quantum chemistry of solids. This book would not have appeared without the help of Prof. M. Cardona who supported the idea of its writing and gave me useful advice. I am grateful to Prof. C. Pisani and members of the Torino group of Theoretical Chemistry, Prof. R. Dovesi, Prof. C. Roetti, for many years of fruitful cooperation. Being a physicist-theoretician by education, I would never have correctly estimated of the role of quantum chemistry approaches to the solids without this cooperation. I am grateful to all my colleagues who took part in our common research (Prof. V. Smirnov, Prof. K. Jug, Prof. T. Bredow, Prof. J. Maier, Prof. E. Kotomin, Prof. Ju. Zhukovskii, Prof. J. Choisnet, Prof. G. Borstel, Prof. F. Illas, Dr. A. Dobrotvorsky, Dr. V. Lovchikov, Dr. V. Veryazov, Dr. I. Tupitsyn, Dr. A. Panin, Dr. A. Bandura, Dr. D. Usvyat, Dr. D. Gryaznov, V. Alexandrov) or sent me the recent results of their research ( Prof. C. Pisani, Prof. R. Dovesi, Prof. C. Roetti, Prof. P. Deak, Prof. P. Fulde, Prof. G. Stoll, Prof. M. Sch¨ utz, Prof. A. Schluger, Prof. L. Kantorovich, Prof. C. Minot, Prof. G. Scuseria, Prof. R. Dronskowski, Prof. A. Titov). I am grateful to Prof. I. Abarenkov, head of the Prof. M.I. Petrashen named seminar for helpful discussions and friendly support. I would like to express my thanks to the members of the Quantum Chemistry Department of St. Petersburg State University, Dr. A. Panin and Dr. A. Bandura, for help in preparing the manuscript – without their help this book would not be here. I am especially indebted to Dr. C. Ascheron, Mrs. A. Lahee and Dr. P. Capper of Springer-Verlag for encouragement and cooperation. St. Petersburg,

Robert Evarestov August, 2006

Contents

Part I Theory 1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

2

Space Groups and Crystalline Structures . . . . . . . . . . . . . . . . . . . . . . . . 2.1 Translation and Point Symmetry of Crystals . . . . . . . . . . . . . . . . . . . . . . 2.1.1 Symmetry of Molecules and Crystals: Similarities and Differences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1.2 Translation Symmetry of Crystals. Point Symmetry of Bravais Lattices. Crystal Class . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Space Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2.1 Space Groups of Bravais Lattices. Symmorphic and Nonsymmorphic Space Groups . . . . . . . . . . . . . . . . . . . . . . . 2.2.2 Three-periodic Space Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2.3 Site Symmetry in Crystals. Wyckoff Positions . . . . . . . . . . . . . . 2.3 Crystalline Structures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3.1 Crystal-structure Types. Structure Information for Computer Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3.2 Cubic Structures: Diamond, Rocksalt, Fluorite, Zincblende, Cesium Chloride, Cubic Perovskite . . . . . . . . . . . . . . . . . . . . . . . . 2.3.3 Tetragonal Structures: Rutile, Anatase and La2 CuO4 . . . . . . . . 2.3.4 Orthorhombic Structures: LaMnO3 and YBa2 Cu3 O7 . . . . . . . . . 2.3.5 Hexagonal and Trigonal Structures: Graphite, Wurtzite, Corundum and ScMnO3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 7

3

Symmetry and Localization of Crystalline Orbitals . . . . . . . . . . . . . . 3.1 Translation and Space Symmetry of Crystalline Orbitals. Bloch Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.1 Symmetry of Molecular and Crystalline Orbitals . . . . . . . . . . . . 3.1.2 Irreducible Representations of Translation Group. Brillouin Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.3 Stars of Wavevectors. Little Groups. Full Representations of Space Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 11 16 16 18 22 26 26 28 34 37 42 47 47 47 51 58

X

Contents

3.1.4 Small Representations of a Little Group. Projective Representations of Point Groups . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 Site Symmetry and Induced Representations of Space Groups . . . . . . . 3.2.1 Induced Representations of Point Groups. Localized Molecular Orbitals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.2 Induced Representations of Space Groups in q-basis . . . . . . . . . 3.2.3 Induced Representations of Space Groups in k-basis. Band Representations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.4 Simple and Composite Induced Representations . . . . . . . . . . . . 3.2.5 Simple Induced Representations for Cubic Space Groups Oh1 , Oh5 and Oh7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.6 Symmetry of Atomic and Crystalline Orbitals in MgO, Si and SrZrO3 Crystals . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 Symmetry of Localized Crystalline Orbitals. Wannier Functions . . . . 3.3.1 Symmetry of Localized Orbitals and Band Representations of Space Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3.2 Localization Criteria in Wannier-function Generation . . . . . . . . 3.3.3 Localized Orbitals for Valence Bands: LCAO approximation . . 3.3.4 Variational Method of Localized Wannier-function Generation on the Base of Bloch Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

5

Hartree–Fock LCAO Method for Periodic Systems . . . . . . . . . . . . . . 4.1 One-electron Approximation for Crystals . . . . . . . . . . . . . . . . . . . . . . . . 4.1.1 One-electron and One-determinant Approximations for Molecules and Crystals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.2 Symmetry of the One-electron Approximation Hamiltonian . . 4.1.3 Restricted and Unrestricted Hartree–Fock LCAO Methods for Molecules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.4 Specific Features of the Hartree–Fock Method for a Cyclic Model of a Crystal . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.5 Restricted Hartree–Fock LCAO Method for Crystals . . . . . . . . 4.1.6 Unrestricted and Restricted Open-shell Hartree–Fock Methods for Crystals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 Special Points of Brillouin Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2.1 Supercells of Three-dimensional Bravais Lattices . . . . . . . . . . . . 4.2.2 Special Points of Brillouin-zone Generating . . . . . . . . . . . . . . . . . 4.2.3 Modification of the Monkhorst–Pack Special-points Meshes . . . 4.3 Density Matrix of Crystals in the Hartree–Fock Method . . . . . . . . . . . 4.3.1 Properites of the One-electron Density Matrix of a Crystal . . . 4.3.2 The One-electron Density Matrix of the Crystal in the LCAO Approximation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3.3 Interpolation Procedure for Constructing an Approximate Density Matrix for Periodic Systems . . . . . . . . . . . . . . . . . . . . . . .

61 66 66 71 73 76 78 83 86 86 90 94 96 105 105 105 109 111 116 119 122 124 124 125 128 132 132 137 140

Electron Correlations in Molecules and Crystals . . . . . . . . . . . . . . . . . 147 5.1 Electron Correlations in Molecules: Post-Hartree–Fock Methods . . . . . 147 5.1.1 What is the Electron Correlation ? . . . . . . . . . . . . . . . . . . . . . . . . 147

Contents

5.1.2 Configuration Interaction and Multi-configuration Self-consistent Field Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1.3 Coupled-cluster Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1.4 Many-electron Perturbation Theory . . . . . . . . . . . . . . . . . . . . . . . . 5.1.5 Local Electron-correlation Methods . . . . . . . . . . . . . . . . . . . . . . . . 5.2 Incremental Scheme for Local Correlation in Periodic Systems . . . . . . . 5.2.1 Weak and Strong Electron-correlation . . . . . . . . . . . . . . . . . . . . . . 5.2.2 Method of Increments: Ground State . . . . . . . . . . . . . . . . . . . . . . 5.2.3 Method of Increments: Valence-band Structure and Bandgap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3 Atomic Orbital Laplace-transformed MP2 Theory for Periodic Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.1 Laplace MP2 for Periodic Systems: Unit-cell Correlation Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.2 Laplace MP2 for Periodic Systems: Bandgap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4 Local MP2 Electron-correlation Method for Nonconducting Crystals . 5.4.1 Local MP2 Equations for Periodic Systems . . . . . . . . . . . . . . . . . 5.4.2 Fitted Wannier Functions for Periodic Local Correlation Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4.3 Symmetry Exploitation in Local MP2 Method for Periodic Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

7

Semiempirical LCAO Methods for Molecules and Periodic Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.1 Extended H¨ uckel and Mulliken–R¨ udenberg Approximations . . . . . . . . . 6.1.1 Nonself-consistent Extended H¨ uckel–Tight-binding Method . . . 6.1.2 Iterative Mulliken–R¨ udenberg Method for Crystals . . . . . . . . . . 6.2 Zero-differential Overlap Approximations for Molecules and Crystals . 6.2.1 Zero-differential Overlap Approximations for Molecules . . . . . . . 6.2.2 Complete and Intermediate Neglect of Differential Overlap for Crystals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3 Zero-differential overlap Approximation in Cyclic-cluster Model . . . . . 6.3.1 Symmetry of Cyclic-cluster Model of Perfect Crystal . . . . . . . . . 6.3.2 Semiempirical LCAO Methods in Cyclic-cluster Model . . . . . . . 6.3.3 Implementation of the Cyclic-cluster Model in MSINDO and Hartree–Fock LCAO Methods . . . . . . . . . . . . . . . . . . . . . . . . . Kohn–Sham LCAO Method for Periodic Systems . . . . . . . . . . . . . . . . 7.1 Foundations of the Density-functional Theory . . . . . . . . . . . . . . . . . . . . . 7.1.1 The Basic Formulation of the Density-functional Theory . . . . . 7.1.2 The Kohn–Sham Single-particle Equations . . . . . . . . . . . . . . . . . . 7.1.3 Exchange and Correlation Functionals in the Local Density Approximation . . . . . . . . . . . . . . . . . . . . . . . 7.1.4 Beyond the Local Density Approximation . . . . . . . . . . . . . . . . . . 7.1.5 The Pair Density. Orbital-dependent Exchange-correlation Functionals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

XI

150 154 155 158 163 163 166 169 174 174 177 180 180 184 188 193 193 193 199 203 203 208 211 211 215 220 231 231 231 234 237 240 244

XII

Contents

7.2 Density-functional LCAO Methods for Solids . . . . . . . . . . . . . . . . . . . . . . 7.2.1 Implementation of Kohn–Sham LCAO Method in Crystals Calculations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.2.2 Linear-scaling DFT LCAO Methods for Solids . . . . . . . . . . . . . . 7.2.3 Heyd–Scuseria–Ernzerhof Screened Coulomb Hybrid Functional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.2.4 Are Molecular Exchange-correlation Functionals Transferable to Crystals? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.2.5 Density-functional Methods for Strongly Correlated Systems: SIC DFT and DFT+U Approaches . . . . . . . . . . . . . . . . . . . . . . . .

249 249 253 259 263 270

Part II Applications 8

9

Basis Sets and Pseudopotentials in Periodic LCAO Calculations . 8.1 Basis Sets in the Electron-structure Calculations of Crystals . . . . . . . . 8.1.1 Plane Waves and Atomic-like Basis Sets. Slater-type Functions 8.1.2 Molecular Basis Sets of Gaussian-type Functions . . . . . . . . . . . . 8.1.3 Molecular Basis Sets Adaptation for Periodic Systems . . . . . . . . 8.2 Nonrelativistic Effective Core Potentials and Valence Basis Sets . . . . . 8.2.1 Effective Core Potentials: Theoretical Grounds . . . . . . . . . . . . . 8.2.2 Gaussian Form of Effective Core Potentials and Valence Basis Sets in Periodic LCAO Calculations . . . . . . . 8.2.3 Separable Embedding Potential . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.3 Relativistic Effective Core Potentials and Valence Basis Sets . . . . . . . . 8.3.1 Relativistic Electronic Structure Theory: Dirac–Hartree–Fock and Dirac–Kohn–Sham Methods for Molecules . . . . . . . . . . . . . . 8.3.2 Relativistic Effective Core Potentials . . . . . . . . . . . . . . . . . . . . . . . 8.3.3 One-center Restoration of Electronic Structure in the Core Region . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.3.4 Basis Sets for Relativistic Calculations of Molecules . . . . . . . . . . 8.3.5 Relativistic LCAO Methods for Periodic Systems . . . . . . . . . . . .

281 281 281 285 291 298 298

LCAO Calculations of Perfect-crystal Properties . . . . . . . . . . . . . . . . 9.1 Theoretical Analysis of Chemical Bonding in Crystals . . . . . . . . . . . . . 9.1.1 Local Properties of Electronic Structure in LCAO HF and DFT Methods for Crystals and Post-HF Methods for Molecules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.1.2 Chemical Bonding in Cyclic-cluster Model: Local Properties of Composite Crystalline Oxides . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.1.3 Chemical Bonding in Titanium Oxides: Periodic and Molecular-crystalline Approaches . . . . . . . . . . . . . . . . . . . . . . 9.1.4 Wannier-type Atomic Functions and Chemical Bonding in Crystals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.1.5 The Localized Wannier Functions for Valence Bands: Chemical Bonding in Crystalline Oxides . . . . . . . . . . . . . . . . . . . .

327 328

302 304 310 310 314 316 318 320

328 333 342 350 358

Contents

9.1.6 Projection Technique for Population Analysis of Atomic Orbitals. Comparison of Different Methods of the Chemicalbonding Description in Crystals . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.2 Electron Properties of Crystals in LCAO Methods . . . . . . . . . . . . . . . . 9.2.1 One-electron Properties: Band Structure, Density of States, Electron Momentum Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.2.2 Magnetic Structure of Metal Oxides in LCAO Methods: Magnetic Phases of LaMnO3 and ScMnO3 Crystals . . . . . . . . . . 9.3 Total Energy and Related Observables in LCAO Methods for Solids ............................................. 9.3.1 Equilibrium Structure and Cohesive Energy . . . . . . . . . . . . . . . . 9.3.2 Bulk Modulus, Elastic Constants and Phase Stability of Solids: LCAO ab-initio Calculations . . . . . . . . . . . . . . . . . . . . . . . 9.3.3 Lattice Dynamics and LCAO Calculations of Vibrational Frequencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

XIII

369 375 375 383 393 393 398 403

10 Modeling and LCAO Calculations of Point Defects in Crystals . . . 10.1 Symmetry and Models of Defective Crystals . . . . . . . . . . . . . . . . . . . . . . 10.1.1 Point Defects in Solids and Their Models . . . . . . . . . . . . . . . . . . . 10.1.2 Symmetry of Supercell Model of Defective Crystals . . . . . . . . . . 10.1.3 Supercell and Cyclic-cluster Models of Neutral and Charged Point Defects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.1.4 Molecular-cluster Models of Defective Solids . . . . . . . . . . . . . . . . 10.2 Point Defects in Binary Oxides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.2.1 Oxygen Interstitials in Magnesium Oxide: Supercell LCAO Calculations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.2.2 Neutral and Charged Oxygen Vacancy in Al2 O3 Crystal: Supercell and Cyclic-cluster Calculations . . . . . . . . . . . . . . . . . . . 10.2.3 Supercell Modeling of Metal-doped Rutile TiO2 . . . . . . . . . . . . . 10.3 Point Defects in Perovskites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.3.1 Oxygen Vacancy in SrTiO3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.3.2 Supercell Model of Fe-doped SrTiO3 . . . . . . . . . . . . . . . . . . . . . . . 10.3.3 Modeling of Solid Solutions of Lac Sr1−c MnO3 . . . . . . . . . . . . . .

409 409 409 413

11

459 459 459 466 470 482 482

Surface Modeling in LCAO Calculations of Metal Oxides . . . . . . . 11.1 Diperiodic Space Groups and Slab Models of Surfaces . . . . . . . . . . . . . . 11.1.1 Diperiodic (Layer) Space Groups . . . . . . . . . . . . . . . . . . . . . . . . . . 11.1.2 Oxide-surface Types and Stability . . . . . . . . . . . . . . . . . . . . . . . . . 11.1.3 Single- and Periodic-slab Models of MgO and TiO2 Surfaces . . 11.2 Surface LCAO Calculations on TiO2 and SnO2 . . . . . . . . . . . . . . . . . . . . 11.2.1 Cluster Models of (110) TiO2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.2.2 Adsorption of Water on the TiO2 (Rutile) (110) Surface: Comparison of Periodic LCAO-PW and Embedded-cluster LCAO Calculations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.2.3 Single-slab LCAO Calculations of Bare and Hydroxylated SnO2 Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.3 Slab Models of SrTiO3 , SrZrO3 and LaMnO3 Surfaces . . . . . . . . . . . . .

417 421 426 426 429 435 438 438 445 452

487 495 507

XIV

Contents

11.3.1 Hybrid HF-DFT Comparative Study of SrZrO3 and SrTiO3 (001) Surface Properties . . . . . . . . . . . . . . . . . . . . . . . 507 11.3.2 F Center on the SrTiO3 (001) Surface . . . . . . . . . . . . . . . . . . . . . . 513 11.3.3 Slab Models of LaMnO3 Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . 515 A

Matrices of the Symmetrical Supercell Transformations of 14 Three-dimensional Bravais Lattices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 521

B

Reciprocal Matrices of the Symmetric Supercell Transformations of the Three Cubic Bravais Lattices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 525

C

Computer Programs for Periodic Calculations in Basis of Localized Orbitals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 527

References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 553

Part I

Theory

1 Introduction

Prof. P. Fulde wrote in the preface to the first edition of his book [5]: Monographs are required that emphasize the features common to quantum chemistry and solidstate physics. The book by Fulde presented the problem of electron correlations in molecules and solids in a unified form. The common feature of these fields is also the use of the LCAO (linear combination of atomic orbitals) approximation: being from the very beginning the fundamental principle of molecular quantum chemistry LCAO only recently became the basis of the first-principles calculations for periodic systems. The LCAO methods allow one to use wavefunction-based (Hartree–Fock), density-based (DFT) and hybrid Hamiltonians for electronic- structure calculations of crystals. Compared to the conventional plane-waves (PW) or muffin-tin orbitals (MTO) approximations the LCAO approach has proven to be more flexible. To analyze the local properties of the electronic structure the LCAO treatment may be applied to both periodic- and molecular-cluster (nonperiodic) models of solid. Furthermore, post-Hartree–Fock methods can be extended to periodic systems exhibiting electron correlation. LCAO methods are able to avoid an artificial periodicity typically introduced in PW or MTO for a slab model of crystalline surfaces. The LCAO approach is a natural way to extend to solid-state procedures of the chemical bonding analysis developed for molecules. With recent advances in computing power LCAO first-principles calculations are possible for systems containing many (hundreds) atoms per unit cell. The LCAO results are comparable with the traditional PW or MTO calculations in terms of accuracy and variety of accessible physical properties. More than 30 years ago, it was well understood that the quantum theory of solids based on LCAO enabled solid-state and surface chemists to follow the theoretically based papers that appeared ( [2]). As an introduction to the theory of the chemical bond in tetrahedral semiconductors the book [3](translation from the Russian edition of 1973) appeared. Later other books [6] and [7] appeared. These books brought together views on crystalline solids held by physicists and chemists. The important step in the computational realization of the LCAO approach to periodic systems was made by scientists from the Theoretical Chemistry Group of Turin University (C. Pisani, R. Dovesi, C. Roetti) and the Daresbury Computation Science Department in England (N.M. Harrison, V.R. Saunders) with their coworkers from different countries who developed several versions of the CRYSTAL computer code–(88, 92, 95, 98, 03, 06) for the first- principles LCAO calculations of periodic systems. This code is now

4

1 Introduction

used by more than 200 scientific groups all over the world. Many results applying the above code can be found in the book published about ten years ago by Springer: [4]. The publication includes review articles on the Hartree–Fock LCAO approach for application to solids written by scientists actively working in this field. The book by Fulde mentioned earlier takes the next step to bridge the gap between quantum chemistry and solid-state theory by addressing the problem of electron correlations. During the next ten years many new LCAO applications were developed for crystals, including the hybrid Hartree–Fock–DFT method, full usage of the point and translational symmetry of periodic system, new structure optimization procedures, applications to research related to optical and magnetic properties, study of point defects and surface phenomena, generation of the localized orbitals in crystals with application to the correlation effects study. Also, LCAO allowed the development of O(N ) methods that are efficient for large-size many-atom periodic systems. Recently published books including [8–11] may be considered as the high-quality modern text books. The texts provide the necessary background for the existing approaches used in the electronic-structure calculations of solids for students and researchers. Published in the Springer Series in Solid State Sciences (vol. 129) a monograph [12] introduces all the existing theoretical techniques in materials research (which is confirmed by the subtitle of this book: From Ab initio to Monte Carlo Methods). This book is written primarily for materials scientists and offers to materials scientists access to a whole variety of existing approaches. However, to our best knowledge a comprehensive account of the main features and possibilities of LCAO methods for the first-principles calculations of crystals is still lacking. We intend to fill this gap and suggest a book reflecting the state of the art of LCAO methods with applications to the electronicstructure theory of periodic systems. Our book is written not only for the solid-state and surface physicists, but also for solid-state chemists and material scientists. Also, we hope that graduate students (both physicists and chemists) will be able to use it as an introduction to the symmetry of solids and for comparison of LCAO methods for solids and molecules. All readers will find the description of models used for perfect and defective solids (the molecular-cluster, cyclic-cluster and supercell models, models of the single and repeating slabs for surfaces, the local properties of the electronic-structure calculations in the theory of the chemical bonding in crystals). We hope that the given examples of the first-principles LCAO calculations of different solid-state properties will illustrate the efficiency of LCAO methods and will be useful for researchers in their own work. This book consists of two parts: theory and applications. In the first part (theory) we give the basic theory underlying the LCAO methods applied to periodic systems. The translation symmetry of solids and its consequency is discussed in connection with a so-called cyclic (with periodical boundary conditions) model of an infinite crystal. For chemists it allows clarification of why the k-space introduction is necessary in the electronic-structure calculations of solids. The site-symmetry approach is considered briefly (it is given in more detail in [13]). The analysis of site symmetry in crystals is important for understanding the connection between one-particle states (electron and phonon) in free atoms and in a periodic solid. To make easier the practical LCAO calculations for specific crystalline structures we explain how to use the data provided on the Internet sites for crystal structures of inorganic crystals and irreducible representations of space groups. In the next chapters of Part I we give the basics of Hartree–Fock and Kohn–Sham methods

1 Introduction

5

for crystals in the LCAO representation of crystalline orbitals. It allows the main differences between the LCAO approach realization for molecules and periodic systems to be seen. The hybrid Hartee–Fock–DFT methods were only recently extended from molecules to solids, and their advantages are demonstrated by the LCAO results on bandgap and atomic structure for crystals. In the second part (applications) we discuss some recent applications of LCAO methods to calculations of various crystalline properties. We consider, as is traditional for such books the results of some recent band-structure calculations and also the ways of local properties of electronic- structure description with the use of LCAO or Wannier-type orbitals. This approach allows chemical bonds in periodic systems to be analyzed, using the well-known concepts developed for molecules (atomic charge, bond order, atomic covalency and total valency). The analysis of models used in LCAO calculations for crystals with point defects and surfaces and illustrations of their applications for actual systems demonstrate the efficiency of LCAO approach in the solid-state theory. A brief discussion about the existing LCAO computer codes is given in Appendix C.

2 Space Groups and Crystalline Structures

2.1 Translation and Point Symmetry of Crystals 2.1.1 Symmetry of Molecules and Crystals: Similarities and Differences Molecules consist of positively charged nuclei and negatively charged electrons moving around them. If the translations and rotations of a molecule as a whole are excluded, then the motion of the nuclei, except for some special cases, consists of small vibrations about their equilibrium positions. Orthogonal operations (rotations through symmetry axes, reflections in symmetry planes and their combinations) that transform the equilibrium configuration of the nuclei of a molecule into itself are called the symmetry operations of the molecule. They form a group F of molecular symmetry. Molecules represent systems from finite (sometimes very large) numbers of atoms, and their symmetry is described by so-called point groups of symmetry. In a molecule it is always possible to so choose the origin of coordinates that it remains fixed under all operations of symmetry. All the symmetry elements (axes, planes, inversion center) are supposed to intersect in the origin chosen. The point symmetry of a molecule is defined by the symmetry of an arrangement of atoms forming it but the origin of coordinates chosen is not necessarily occupied by an atom. In modern computer codes for quantum-chemical calculations of molecules the point group of symmetry is found automatically when the atomic coordinates are given. In this case, the point group of symmetry is only used for the classification of electronic states of a molecule, particularly for knowledge of the degeneracy of the one-electron energy levels . To make this classification one needs to use tables of irreducible representations of point groups. The latter are given both in books [13–15] and on an Internet site [16] Calculation of the electronic structure of a crystal ( for which a macroscopic sample contains 1023 atoms ) is practically impossible without the knowledge of at least the translation symmetry group. The latter allows the smallest possible set of atoms included in the so-called primitive unit cell to be considered. However, the classification of the crystalline electron and phonon states requires knowledge of the full symmetry group of a crystal (space group). The structure of the irreducible representations of the space groups is essentially more complicated and use of existing tables [17] or the site [16] requires knowledge of at least the basics of space-group theory.

8

2 Space Groups and Crystalline Structures

Discussions of the symmetry of molecules and crystals are often limited to the indication that under operations of symmetry the configuration of the nuclei is transformed to itself. The symmetry group is known when the coordinates of all atoms in a molecule are given. Certainly, the symmetry of a system is defined by a geometrical arrangement of atomic nuclei, but operations of symmetry translate all equivalent points of space to each other. In equivalent points the properties of a molecule or a crystal (electrostatic potential, electronic density, etc.) are all identical. It is necessary to remember that the application of symmetry transformations means splitting all space into systems of equivalent points irrespective of whether there are atoms in these points or not. In both molecules and in crystals the symmetry group is the set of transformations in three dimensional space that transforms any point of the space into an equivalent point. The systems of equivalent points are called orbits of points (This has nothing to do with the orbitals – the one-electron functions in manyelectron systems). In particular, the orbits of equivalent atoms in a molecule can be defined as follows. Atoms in a molecule occupy the positions q with a certain site symmetry described by some subgroups Fq of the full point symmetry group F of a molecule. The central atom (if one exists) has a site-symmetry group Fq = F . Any atom on the principal symmetry axis of a molecule with the symmetry groups Cn , Cnv , Sn also has the full symmetry of the molecule (Fq = F ). Finally, Fq = F for any atom lying in the symmetry plane of a molecule with the symmetry group F = Cs . In other cases Fq is a subgroup of F and includes those elements R of point group F that satisfy the condition Rq = q. Let F1 be a site-symmetry group of a point q 1 in the molecular space. This point may not be occupied by an atom. Let the symmetry group of a molecule be decomposed into left cosets with respect to its site-symmetry subgroup Fq :  Rj Fj , R1 = E, j=1,2,...,t (2.1) F = j

The set of points q j = Rj q 1 , j=1,2,...,t, forms an orbit of the point q 1 . The point q j of the orbit has a site-symmetry group Fj =Rj F Rj−1 isomorphic to F1 . Thus, an orbit may be characterized by a site group F1 , (or any other from the set of groups Fj ). The number of points in an orbit is equal to the index t=nF /nFj of the group Fj in F. If the elements Rj in (2.1) form a group P then the group F may be factorized in the form F = P Fj . The group P is called the permutation symmetry group of an orbit with a site-symmetry group Fj (or orbital group). In a molecule, all points of an orbit may be either occupied by atoms of the same chemical element or vacant. Only the groups Cn , Cnv , Cs may be site-symmetry groups in molecules. A molecule with a symmetry group F may have F as a sitesymmetry group only for one point of the space (for the central atom, for example). For any point-symmetry group a list of possible orbits (and corresponding site groups) can be given. In this list some groups may be repeated more than once. This occurs if in F there are several isomorphic site-symmetry subgroups differing from each other by the principal symmetry axes Cn , two-fold rotation axes U perpendicular to the principal symmetry axis or reflection planes. All the atoms in a molecule may be partitioned into orbits.

2.1 Translation and Point Symmetry of Crystals

9

Example. The list of orbits in the group F = C4v is Fq = C4v (1), Cs (4), C1 (8)

(2.2)

The number of atoms in an orbit is given in brackets. For example, in a molecule XY4 Z (see Fig. 2.1) the atoms are distributed over three orbits: atoms X and Z occupy

]

&]

; @D[LV Fig. 3.9. Wannier functions for the silicon upper valence band along the [111] direction: a) full electron calculation; b) pseudopotential calculation

The function corresponding to the upper band (dashed curve) is determined up to a linear combination of the three functions transforming via t1u irrep. One can see that both Wannier functions are almost completely localized around one of the oxygen atoms, which confirms the ionic character of MgO compound. The character of the localization of Wannier functions depends on the analytical properties of Bloch states (as a function of the wavevector) that are essentially determined by the nature of the system under consideration. One can arbitrary change only the form of an unitary transformation of Bloch functions. It is just this arbitrariness that is used in the variational approach [42] to assure the best localization of Wannier functions. The accuracy of the Wannier functions obtained by the proposed method is determined solely by the accuracy of the Bloch functions and the size of the supercell used. As the calculations have shown, the proposed method is reliable and useful in the problem of generation of the localized Wannier functions. In the two examples

3.3 Symmetry of Localized Crystalline Orbitals. Wannier Functions

103



D





0J

2





>@D[LV

Fig. 3.10. Wannier functions for the MgO upper valence band along [111] direction: solid line for WF of a1g symmetry, dotted line – for one of the three WFs of t1u symmetry

considered the Bloch states of only occupied bands were used for WF generation. Inclusion of the vacant band states of the appropriate symmetry allows Wannier-type atomic orbitals (WTAO) to be generated. WTAO are used for the chemical-bonding analysis in crystals. We consider WTAO applications in Chap. 9.

4 Hartree–Fock LCAO Method for Periodic Systems

4.1 One-electron Approximation for Crystals 4.1.1 One-electron and One-determinant Approximations for Molecules and Crystals The complex quantum-mechanical systems that are molecules and crystals, consisting of a great number of atomic nuclei and electrons, can in many cases be modeled by the nonrelativistic Hamiltonian having the form ˆ = −1 H 2

2Ne  i=1

N

∆r i −

a 1 1 ∆Rj + V (r, R) 2 j=1 Mj

(4.1)

where r i are the coordinates of electrons (i = 1, 2, ..., 2Ne ), Rj are the coordinates of nuclei (j = 1, 2, ..., Na ) and V (r, R) is the energy of the Coulomb interaction of electrons and nuclei: V (r, R) =



j 0 in (5.6). In the FCI method all MSOs are usually supposed to be fixed as the solutions of HF MO LCAO equations but the parameters CI are varied in the expression ˆ e |Φ − λ [ Φ|Φ − 1] L = Φ|H

(5.7)

We find [8] " #     ∂ ˆ e| CJ ΦJ CI ΦI | CJ ΦJ − λ CI ΦI |H ∗ ∂CK J I J I  ∂  ∗  ˆ Φ | H |Φ − λ Φ |Φ C C = I e J I J J I ∗ ∂CK I,J    ˆ e |ΦJ − λ ΦK |ΦJ = 0 = CJ ΦK |H J

(5.8)

152

5 Electron Correlations in Molecules and Crystals

This gives the matrix eigenvalue problem

where

HC = λSC

(5.9)

ˆ e |ΦJ , SKJ = ΦK |ΦJ HKJ = ΦK |H

(5.10)

and the eigenvalue in (5.9) is equal to λ=

ˆ e |Φ Φ|H Φ|Φ

(5.11)

N ˆ + gˆ consists of the single-electron h ˆ = h(r ˆ i ) and ˆ =h The Hamiltonian operator H i=1

two-electron gˆ =

1 2

N

i=j=1

1 |r i −r j |

ˆ and gˆ the matrix parts. Calculating for operators h

ˆ elements Φ|h|Φ , Φ|ˆ g |Φ and taking into account the orthonormality of MSOs it can be shown [8] that: 1. Different configurations are orthonormal; ˆ there will be nonvanishing matrix elements 2. For any single-electron operator h only between configurations that differ at most in one MSO; 3. For any two-electron operator gˆ there will be nonvanishing matrix elements only between configurations that differ at most in two MSOs. The MOs ϕi are solutions to the HF equations Fˆ ϕi = ǫi ϕi (5.12) where ˆ+ Fˆ = h

N   j=1

ˆj Jˆj − K



(5.13)

The j summation in (5.13) runs over all those orbitals that for the ground-state ˆ j operators were configuration Φ0 are occupied. The Coulomb Jˆj and exchange K defined in (4.16) and (4.17). ˆ e |ΦI be calculated, where ΦI = Φ0 and ΦJ = Let now the matrix elements ΦJ |H Φνn (in the Φνn configuration one electron has been excited from the nth occupied spin-orbital to the νth empty spin-orbital). It can be shown [8] that both overlap and Hamiltonian matrix elements vanish between the ground-state configuration Φ0 and any single-excited one. Having determined all the relevant matrix elements of (5.9) one may obtain the wavefunction (5.6) as well as the corresponding total electron energy of the FCI method. Notice that in contrast to the HF calculations, the FCI calculations do not require any self-consistency with respect to MOs. Diagonalization of the N -electron Hamiltonian in the basis of Slater determinants gives us energies and WFs of the ground and excited states of the system. It is pertinent to note that for the FCI method the choice of MO basis is not important because any unitary transformation of the MO basis induces unitary transformation of the determinant basis. The FCI method is the most general of several theories for treating electron correlations. As a variational method it provides upper bounds for the correlation energy. By definition the FCI calculation means that all NCI configurations (possible for a

5.1 Electron Correlations in Molecules: Post-Hartree–Fock Methods

153

given number of electrons N and M AO basis functions) are included in the sum (5.6). FCI calculations can be practically realized only for small molecules and small basis sets as the number of possible configurations drastically increases with increasing number of atoms in a molecule and large-scale CI calculations become very expensive. As an example, the CH4 molecule with 10 electrons can be taken [5]. Using a minimal basis set of 9 AOs (1s, 2s, 2p for the C atom and 1s for each of four H atoms) one can construct NCI = 43758 Slater determinants (configurations). When the tetrahedral point-symmetry restrictions are taken into account this number considerably reduces (NCI = 5292 for singlet states). Enlarging the basis set to 35 functions (double-zeta plus polarization basis, see Chap. 8) increases the number of singlets to 2 × 1010 . When larger molecules are considered and larger basis sets are used, the restriction of the chosen configurations is required. There are several ways of achieving this restriction. 1. Develop some procedure for selection of the most important configurations. In its most general form this method is called GenCI. Frequently used are CIS, CID, CISD, CISDT etc. methods where 1-electron, 2-electron, 1+2-electron, 1+2+3-electron excitations of electrons from occupied HF states to virtual ones are taken into account. These methods can be called restricted CI (RCI) methods. In some computer codes for molecular calculations automatic selection of the most important configurations is performed [119]. 2. Subdivide one-electron MOs into several groups. The most primitive subdivision is in three groups: inactive MOs, active MOs, and virtual MOs. Inactive MOs have occupancy 2 in all determinants in CI expansion, virtual MOs have occupancy 0 in all determinants in CI expansion, and occupancies of active MOs are between 0 and 2. It is supposed that in CI wavefunction only excitations within active MOs are taken into account. 3. Combination of 1 and 2, that is subdivision of MOs into groups and use of RCI in the active space. If RCI expansions are used or orbitals are subdivided into inactive and active groups, or both, then variation of the orbitals themselves may lead to an essential energy decrease (in contrast to the FCI method where it does not happen). Such combined methods that require both optimization of CI coefficients and LCAO coefficients in MOs are called MCSCF methods. Compared with the CI method, the calculation of the various expansion coefficients is significantly more complicated, and, as for the Hartree–Fock–Roothaan approximation, one has to obtain these using an iterative approach, i.e. the solution has to be self-consistent (this gives the label SCF). One of the most popular methods of MCSCF class is the complete active space SCF (CASSCF) method by Roos [118] where FCI is performed in active space and optimization of MOs is also done. Note that active–active orbital rotations are irrelevant in the framework of this method. The most popular version of the RCI method application is to restrict by only single- and double-excited configurations (CISD method). It is well known that the CI single (CIS) method finds no use for ground states as the ground-state HF energy is unaffected by inclusion of single excitations (Brillouin theorem, [102]). In the CISD method the singly excited determinants mix with doubles and thus can have some influence on the lowest eigenvalue [102]. What about triple excitations? While there are

154

5 Electron Correlations in Molecules and Crystals

no nonzero matrix elements between the ground state and triply excited states, the triplets do mix with the doubles, and can through them influence the lowest-energy eigenvalue (CISDT method). So, here is some motivation for including them. On the other hand, there are a lot of triples, making their inclusion difficult in a practical sense. As a result, triples and higher-level excitations, are usually not accounted for in the RCI methods so that the CISD approximation dominates in CI calculations. The scaling for CISD with respect to system size, in the large-basis limit, is on the order of N 6 . It poses a limit on the sizes of systems that can be practically addressed. Fortunately, the symmetry restrictions allow significant reduction in the computational effort. Similarly, the core orbitals can be frozen in the generation of the excited state. 5.1.3 Coupled-cluster Methods The CC method [120] is one of the mathematically elegant techniques for estimating the electron correlation [102,121]. In this method, the FCI wavefunction is represented as ΨCC = exp(Tˆ)ΨHF (5.14) The cluster operator Tˆ is defined in terms of standard creation–annihilation operators as ≤N  ≤N  >N >N   tij11ij22 a†i1 a†i2 aj1 aj1 + . . . (5.15) Tˆ = tij a†i aj + j

i

j1 0.9. This category includes “core” LWFs, but also LWFs associated with valence AOs in anions of very ionic systems. “Lone-pair” or “hydrogen-bond” LWFs may also enter this category. b) Bond LWF: two near-by atoms AM, BN exist such that QiAM +QiBN ≥ 0.9, and the ratio QiAM /QiBN is comprised between 1 (pure covalency) and 1/4 (high ionicity). c) Atypical LWF: Wi0 does not enter the previous categories.

190

5 Electron Correlations in Molecules and Crystals

(3) using the previous information recognize the subsets, the site-symmetry subgroups Ff and the irreducible representations to which they belong; (4) generate, and orthonormalize the new SALWFs. A criterion based on a Mulliken analysis is adopted again to subdivide atomic LWFs associated to the same irreducible atom A into shell-subsets (without loss of generality, A can be assumed to be in reference 0 cell). The bond LWFs are the representatives of double and triple bonds, and are assigned to the (AO−BM )-subset. Thus, part of the LWFs, classified as SALWFs, only require numerical refinement, or the subset including all the atypical ones. All others are grouped in subsets S, either of a “shell” or of a “bond” type, each one comprising ns members. Bond and atomic LWFs are characterized by one and two atomic centers, respectively. Using this information the subgroup Gf that leaves invariant the corresponding symmetry element (either a center or an axis in real space) is found. The irreducible representations of Gf are found and for each of them the representative matrices are first constructed and, then, used to build up the idempotent projector operators for the first row and the shift operators for all other rows. The details of this procedure can be found in [201, 202]. Finally, when all atomic and bond subsets have been symmetry adapted, they are orthonormalized. Orthonormalization is performed in two steps. Using a given net in reciprocal space, the nonorthogonal functions generated in the previously described steps are transformed into Bloch functions, orthonormalized using a L¨ owdin scheme in each k-point of the net, and backtransformed into Wannier functions. This is accomplished using a straightforward modification of the Wannierization scheme reported in [203]. At this step,the resulting SALWFs are orthonormal just under Born–Von Karman cyclic conditions. If necessary, the functions can be corrected to satisfy accurate orthonormalization by integration over the whole real space. We discussed a method [201] for generating from a set of (generally nonsymmetric) localized Wannier functions (LWF), an equivalent set of orthonormal functions that are adapted not only to the translational, but also to the point symmetry of the crystalline structure, while maintaining good locality features. They are called therefore SALWFs (symmetry adapted localized Wannier functions). At variance with other methods based on the induced representations theory this method is largely based on a chemical analysis of the structure of LWFs: despite this somewhat empirical character, it performs very well with a variety of molecular and crystalline systems. The effectiveness of this procedure was demonstrated [201] by way of examples, with reference to four test cases: the CH3 Cl molecule (with C3v symmetry), linear polyacetylene, lithium bromide with the rocksalt structure (symmorpic space group Oh5 ) and crystalline silicon (nonsymmorphic space group Oh7 ). SALWFs generated appear well suited for use in the local correlation methods. In future, the symmetrized fitted LWFs can be used to have more a efficient computational procedure of LMP2 calculations. Concluding the consideration of the modern electron-correlation methods for periodic systems we see that the first-principles LCAO post-HF methods for solids are essentially more difficult compared with those for the molecular systems. This is why until now the simpler semiempirical approaches have been popular for crystals. These approaches allow the intra-atomic and partly interatomic correlation effects to be taken into account by introduction of semiempirical parameters calibrated on the ba-

5.4 Local MP2 Electron-correlation Method for Nonconducting Crystals

191

sis of first-principles calculations or experimental data. In many cases these methods give correct qualitative characteristics of the crystalline electronic structure that may be later corrected in the first-principles calculations. The semiempirical LCAO methods for periodic systems are considered in the next chapter.

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

6.1 Extended H¨ uckel and Mulliken–R¨ udenberg Approximations 6.1.1 Nonself-consistent Extended H¨ uckel–Tight-binding Method During the early days of molecular quantum chemistry, when computational power was minimal, the semiempirical LCAO methods were applied even for small molecules [204, 205]. Later, at the beginning of the 1970s, these approaches were extended to crystalline solids [206–208] and allowed calculations of their properties to be made in the period when the first-principles HF LCAO calculations for solids were practically unreliable. The limitations of the first-principles HF LCAO calculations are caused mainly the by necessity of evaluation of multicenter two-electron integrals whose number grows proportionally as N 4 (N is the number of AOs used). Therefore, in the quantum chemistry of large molecules and solids the semiempirical calculations continue to appear in large numbers in chemical literature. We refer the reader to the recently published book [102], Chap.5, where the corresponding bibliography of semiempirical methods for molecules can be found. In this chapter we discuss the extension of LCAO semiempirical methods of molecular quantum chemistry to periodic systems and provide a comparison between semiempirical Hamiltonians for molecules and crystals. The approximate LCAO methods of quantum chemistry can be divided on empirical (semiquantitative) and semiempirical grounds. The empirical (semiquantitative) methods are based on a one-electron effective Hamiltonian and may be considered as partly intuitive: extended H¨ uckel theory (EHT) for molecules [204] and its counterpart for periodic systems – the tight-binding (TB) approximation. As, in these methods, the effective Hamiltonian is postulated there is no necessity to make iterative (self-consistent) calculations. Some modifications of the EHT method introduce the self-consistent charge-configuration calculations of the effective Hamiltonian and are known as the method of Mulliken–R¨ udenberg [209]. The semiempirical methods are based on the simplification of the HF LCAO Hamiltonian and require the iterative (self-consistent) density matrix calculations: complete and intermediate neglect of differential overlap (CNDO and INDO – approximations), neglect of diatomic differential overlap (NDDO) and others, using the neglect of differential overlap (NDO) approximation.

194

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

Both groups of methods use the valence-electron approximation, i.e. all core electrons are ignored. It is assumed that core electrons are sufficiently invariant to differing chemical environments so that changes in their orbitals as a function of environment are of no chemical consequence, energetic or otherwise. The valence atomic orbitals are represented by a so-called Slater-type orbital (STO). The mathematical form of a normalized STO (in atom-centered polar coordinates) is χµ (r) = Rµ (r)Ylm (θ, ϕ) = Nµ rn−1 exp(−ζµ r)Ylm (θ, ϕ)

(6.1)

The radial part Rµ (r) of STO χµ (r) depends on n (the principal quantum number for the valence orbital) and an orbital exponent ζµ that can be chosen according to a simple set of rules developed by Slater [210], (see Sect. 8.1.1), in EHT and TB methods or considered as semiempirical parameters. The angular parts are spherical harmonic functions Ylm (θ, ϕ) depending on the angular momentum quantum numbers l and m (in the majority of cases their real combinations Ylm (θ, ϕ) ± Yl−m (θ, ϕ) are used, giving for l = 1, 2, 3 the angular part of p, d, f atomic functions, respectively). STOs have a number of features that make them attractive. The orbital has the correct exponential decay with increasing r, the angular component is hydrogen-like, and the 1s orbital has, as it should, a cusp at the nucleus (i.e. is not smooth). More importantly, from a practical point of view, overlap integrals between two STOs as a function of interatomic distance are readily computed. In simple H¨ uckel theory (SHT) all STOs in a molecule are supposed to be orthogonal, in EHT the AOs overlap matrix S is computed directly. In EHT for molecules the MOs and the corresponding one-electron energies are found as the eigenfunctions and eigenvalues of the effective Hamiltonian H: det |Hµν − Sµν ǫi | = 0

(6.2)

The dimension of the matrices H and S is equal to the whole number of the atomic STOs. The values for diagonal elements Hµµ are taken as the negative of the average ionization potential for an electron in the appropriate valence orbital. Of course in many-election atoms, the valence-shell ionization potential (VSIP) for the groundstate atomic term may not necessarily be the best choice for the atom in a molecule, so this term is best regarded as an adjustable parameter, although one with a clear, physical basis. VSIPs have been tabulated for most of the atoms in the periodic table [211, 212]. The nondiagonal elements (for the nearest neighbors known as resonance integrals) are more difficult to approximate. Wolfsberg and Helmholz [213] suggested the following convention: K Hµν = (6.3) (Hµµ + Hνν ) Sµν 2 where K is an empirical constant and Sµν is the overlap integral. Thus, the energy associated with the matrix element is proportional to the average of the VSIPs for the two orbitals µ and ν times the extent to which the two orbitals overlap in space (note that, by symmetry of angular parts the overlap between different valence STOs on the same atom is zero). Originally, the constant K was given a different value for matrix elements corresponding to σ- and π-type bonding interactions. In modern

6.1 Extended H¨ uckel and Mulliken–R¨ udenberg Approximations

195

EHT calculations, it is typically taken as 1.75 for all matrix elements, although it can still be viewed as an adjustable parameter when such adjustment is warranted. Because the matrix elements do not depend on the final MOs in any way (unlike HF- theory), the process is not iterative, so it is very fast, even for very large molecules. The very approximate nature of the resonance integrals in EHT makes it inaccurate for the calculation of the atomic positions in molecules so that use of EHT is best restricted to systems for which experimental geometries are available. For such cases EHT tends to be used today to generate qualitatively correct MOs in much the same fashion as it was used 50 years ago [102]. In the 21st century, such a molecular problem has become amenable to more accurate treatments (HF and post-HF methods, see Chapters 4 and 5), so the province of EHT is now primarily very large systems, like extended solids, where its speed makes it a practical option for understanding the band structure of bulk and surface states [214]. In the EHT method for solids, crystalline orbitals (4.55) are expanded over the Bloch sums (4.53) of valence AOs and the secular equation det |Hµν (k) − Sµν (k)ǫi (k)| = 0

(6.4)

is solved where Hµν (k) and Sµν (k) are, respectively, the matrix elements of the effective one-electron Hamiltonian and of the overlap integrals between two LCAO Bloch sums expressed as   Hµν (k) = exp(ikRn )Hµν (r − Rn ), Sµν (k) = exp(ikRn )Sµν (r − Rn ) (6.5) Rn

Rn

The difference between the matrix elements Hµν (k) (6.5) and Fµν (k) (4.56) is due to the difference between HF and EHT Hamiltonians: the former includes one-electron and two-electron parts and depends on the crystalline density matrix (4.65), the latter are assumed to be proportional to the overlap matrix elements. The explicit form of Hµν (r − Rn ) is given as follows Hµν (r − Rn ) =

1 Kµν (Hµµ + Hνν ) Sµν (r − Rn ) 2

(6.6)

where the proportionality constant Kµν = 1 for µ = ν and otherwise Kµν is an empirically adjustable parameter, Hµν is the valence-state ionization potential (VSIP) of AO χµ . These matrix elements are fixed at the beginning of EHT calculations so that the seqular equations (6.4) are solved independently for different wavevector k values and the calculation does not require the self-consistency. Due to the translation symmetry the order of secular equation (6.4) is equal to the number of valence AOs per primitive cell. The field of lattice summations in matrix elements Hµν (k), Sµν (k) depends on the model chosen. In the infinite-crystal model the summations are made up to the distance when the overlap integrals Sµν (r − Rn ) become less than some threshhold. In the cyclic-cluster model these summations are made in such a way that the lattice summation is restricted by the cyclic-cluster translation vector. As was already mentioned the shape and size of the cyclic cluster chosen defines the kvectors set, for which the calculation is in fact made. As EHT is a nonself-consistent method (the matrix elements are calculated independently for different k-vectors) the choice of one or another restriction for summation in the direct lattice is mainly

196

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

a conceptual point. The EHT approach to solids (known also as the tight-binding (TB) approximation) is applied in many cases as an interpolation method, to be used in connection with more accurate calculation schemes or experimental data [58]. As an example, we consider the EHT band structure of Si crystal, fitted in [214] to reproduce the experimental bandgap and optical properties. The lattice summation was taken over all atoms within the sixth-nearest neighbors. In order to reproduce optical properties it turned out that four proportionality constants (Kss , Kspσ , Kppσ and Kppπ ) are required for each shell of neighbors resulting in 24 fitting parameters. Adding the ionization potentials Is , Ip and orbital exponents ζs , ζp for the Slatertype AOs (which are also treated as fitting parameters), this amounts to a total 28 adjustable fitting parameters. These parameters have been determined by fitting to the pseudopotential band-structure calculations for the experimental value of the cubic lattice constant [215] and experimental data. The best-fit parameters are listed in Table 6.1. Table 6.1. Fitted parameters for Si crystal, [214]

Si Kss Kspσ Kppσ Kppπ

1

2

1.403 1.409 1.890 2.290

1.523 1.931 3.050 2.570

Neighbors 3 4 0.955 2.095 3.780 0.150

1.355 0.375 1.750 2.150

5

6

5.450 2.485 0.000 1.000

4.550 0.000 1.800 4.500

In fitting the bands, special weight has been given to the valence and conduction bands at Γ , the conduction bands at L and K, and the conduction-band minima at +0.85(2π/a0 ) along the (001) directions, which may influence the optical properties. These band states are somewhat sensitive to the change in the individual values of the fitting parameters and special attention has been paid to their determination. The energy eigenvalues at high-symmetry points of the BZ (see Fig. 3.2) are compared to the Hartree–Fock LCAO calculation and experimental values in Table 6.2. The energies in eV are measured relative to the top of the valence band with the symmetry Γ5+ . As is seen from Table 6.2 an excellent description of the valence and conduction bands has been achieved throughout the Brillouin zone. The main features of the bands are reproduced quite accurately. More specifically, the highest valence and lowest conduction bands run parallel along the Λ, ∆, and Σ lines and the indirect bandgap of Si, the ∆ minima of which lie at 85% of the way along the Γ − X directions, has been exactly reproduced. It is seen from Table 6.1 that the fitted values of EHT parameters are essentially different compared to those used for molecules. The orbital exponent value ζs = ζp = 1.385 found with Slater rules differs from the fitted values ζs = 1.656, ζp = 1.728. The neutral Si atom ionization potentials Is = 16.34 eV, Ip = 8.15 eV also differ from the corresponding fitted values 15.55 eV and 7.62 eV, respectively. Analyzing the data given in Table 6.1 one sees that the proportionality constant is not the same for 2s and 2p orbitals (its value, 1.75, is taken in molecular calculations) and essentially depends on the interatomic distance.

6.1 Extended H¨ uckel and Mulliken–R¨ udenberg Approximations

197

Table 6.2. EHT fitted, HF and experimental eigenvalues (in eV) for Si crystal at Γ , X, and L-points relative to the valence-band maxima Level

Fitted

HF

Γ Γ Γ Γ L L L L L X X X ∆ K

0.00 –12.32 3.43 4.08 –10.82 –6.20 –1.12 2.26 4.43 –7.92 –2.95 1.33 1.13 1.62

0.00 –12.36 3.43 4.10 –9.55 –6.96 –1.23 2.23 4.34 –7.69 –2.86 1.17 1.10 1.66

Experimental –12.4, –12.5 3.45, 3.41 4.15 –9.3 –6.4, –6.8 –1.2 2.2, 2.3 3.9 –2.5, –2.9 1.13

The fitted EHT parameters were used in [214] for the EHT calculations to study the molecular oxygen chemisorption and hydrogen-terminated Si(001) ultrathin films. Even when using modern computer codes and facilities the first-principles calculations would be, in this case, very complicated as is seen from the examples given in Chap. 11. In the example considered the remarkable fit for Si crystal has been achieved within the EHT formalism by defining a rather large parameter basis set that resembled a typical Slater–Koster (tight-binding) parametrization. However, it is surprising that, to our knowledge, a systematic quantitative study on the accuracy attainable with the EHT when applied to different bulk materials has been attempted only recently [216]. It was shown how the simple EHT method can be easily parametrized in order to yield accurate band structures for bulk materials, while the resulting optimized atomic orbital basis sets present good transferability properties. The number of parameters involved is exceedingly small, typically ten or eleven per structural phase. A new EHT parametrization scheme was applied to almost fifty elemental and compound bulk phases. An orthonormal AO basis set was chosen for each inequivalent atom M . Generally, the basis involves rather extended radial wavefunctions, although any other type of basis set may be employed as well. In this work, the Hamiltonian matrix elements HµM,νN were taken in the form HµM,νN = KEHT (IµM + IνN ) /2

(6.7)

where KEHT is a constant traditionally set to a value of 1.75 and IµM , IνN are onsite energies of both elements M, N . From the above formula it follows that the strength of the Hamiltonian matrix elements is weighted by the mean value of the onsite energies, so that a shift in energy of these onsite parameters does not translate into a rigid shift in energy of the EHT-derived band structure. Therefore, and in order to avoid any arbitrariness in the origin of the energy scales, the Fermi level for transition

198

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

metals to –10 eV was fixed and the top of the valence band for semiconductors at –13 eV. It was then found that increasing KEHT to 2.3 consistently provided better fits for all elements, although similar good fits may be obtained with KEHT = 1.75 if the Fermi level is lowered to around –20 eV. A minimal spd basis set per element was employed, while each AO is described by a double Slater wavefunction. Apart from the onsite energies (Is , Ip , and Id ), this leads to three parameters per l quantum number: the exponents ζ1 and ζ2 (with ζ1 < ζ2 ), and the coefficient for the former, C1 . The second coefficient C2 is determined by imposing normalization of the wavefunction. For transition metals the optimization of the three AO parameters was found to be redundant for the s and p orbitals, and equally good fits could be obtained by fixing ζ2 to a rather large value: ζ2 > 20.0. Since such a highly localized term gives a negligible contribution to the overlaps with neighboring orbitals, it was explicitly omitted, while allowing the coefficient C1 to take values smaller than 1.0 (i.e. the ζ2 Slater orbital only contributes to the normalization of the wavefunction). For the d orbitals, on the contrary, it was found necessary to include the ζ2 contribution. Hence, the transition-metal fits comprise 10 parameters per elemental phase. In order to improve the transferability of the EHT, the AO basis set of a given element simultaneously for different structural phases (e.g. Ti-fcc, -bcc, and -hex) has also been optimized, while the onsite energies have been treated as independent parameters for each phase. For the spin-polarized phases of Fe, Co, and Ni, the coefficient of the d orbitals was additionally varied independently for each spin, since the d bandwidths are larger for the spin minority bands than for the majority ones. The main difference from traditional TB schemes is clear – explicit definition of the AOs. This might look at first glance as a disadvantage, since it requires the calculation of the overlap matrix elements. However, the computational effort involved in constructing the actual overlap S(k) and Hamiltonian H(k) matrices is minimal (only two-center integrals plus the simple EHT formula are involved) and more importantly, for a fixed cutoff radius, it scales linearly with the number of orbitals in the unit cell. The explicit use of AOs can be regarded as advantageous, particularly in what concerns the transferability of the EHT parameters, since the dependence of the overlap terms SµM,νN on the interatomic distance dM N readily provides a natural scaling law that is not restricted to small variations of dM N . A further advantage is the possibility to obtain the local density of states, while the traditional TB methods only provide real space-integrated quantities. The empirically adjusted and consistent set of EHT valence orbital parameters for molecular calculations, based on the Hartree–Fock–Slater (see (4.23)) model of atoms, was recently suggested in [217] for all elements of the periodic table. The parametrization scheme uses individual values of the exchange parameter, α, for each atom. Each value of α was adjusted to reproduce the empirical value of the first ionization energy of the atom considered. The expectation values, energies and radial functions for all elements of the periodic table have been evaluated on the basis of the Hartree–Fock–Slater model and individual exchange parameters. A consistent set of Slater-type orbital single ζ valence atomic orbital exponents and energies for all elements of the periodic table, suitable for orbital interaction analysis, was presented. These exponents were calculated by fitting the r ST O moments to numerical empirically adjusted r HF S results. In future, these parameters may appear to be useful for TB method calculations of solids after some modifications.

6.1 Extended H¨ uckel and Mulliken–R¨ udenberg Approximations

199

The process in the EHT and TB methods does become iterative if VSIPs are not included in the set of fitted parameters but are adjusted as a function of partial atomic charge as described in the next subsection, since the partial atomic charge depends on the occupied orbitals. Such a scheme is applied for more ionic systems than those studied by the EHT method. The self-consistent one-electron Hamiltonian Mulliken–R¨ udenberg calculation scheme is considered in the next subsection. 6.1.2 Iterative Mulliken–R¨ udenberg Method for Crystals The R¨ udenberg’s integrals approximations for molecules has been described in [209] and in more detail in [218]. This approximation was introduced by R¨ udenberg [219] to simplify the calculation of two-electron four-center integrals   1 (µM, νN |σP, λL) = dr 1 dr 2 χµM (r 1 )χνN (r 1 ) χσP (r 2 )χλL (r 2 ) (6.8) r12 where χµM (r) is the µth AO on the M th atom in a molecule. Let χ1M , χ2M , . . . be a complete set of orthogonal real orbitals on center M and analogously χ1N , χ2N . . ., χ / 1P , χ2P . . . and χ1L , χ2L . . . - on centers N, P , and L, respectively. If SµM,νN = drχµM (r)χνN (r) denotes the overlap integrals between the orbitals χµM (r) and χνN (r), then we have the expansions  χµM (r 1 ) = SµM,ωN χωN (r 1 ) (6.9) ω

χνN (r 2 ) =



SωM,νN χωM (r 2 )

(6.10)

ω

whence χµM (r 1 )χνN (r 2 ) =

1 [SµM,ωN χνN (r 1 )χωN (r 2 ) 2 ω

+SνN,ωM χµM (r 1 )χωM (r 2 )]

(6.11)

Insertion of (6.11) and the analogous formula for the centers L,K in (6.8) expresses the four-center integral in terms of two-center Coulomb integrals and overlap integrals: (µM, νN |σP, λL) =

1  [SµM,ωN SσP,ω′ L (ωN, νN |ω ′ L, λL) 4 ω ′ ω

+SµM,ωN SλL,ω′ P (ωN, νN |σP, ω ′ P ) + SνN,ωM SσP,ω′ L (µM, ωM |ω ′ L, νL) (6.12) +SνN,ωM SλL,ω′ P (µM, ωM |σP, ω ′ P )] In the Mulliken approximation [220] only the first term in expansion (6.12) is taken so that the one-electron distribution is approximated by

1 χµM (r 1 )χνN (r 1 ) ∼ = SµM,νN χ2µM (r 1 ) + χ2νN (r 1 2

(6.13)

Using expansions (6.9) and (6.10) for the two-electron distribution and the Mulliken approximation we obtain

200

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

χµM (r 1 )χνN (r 2 ) ∼ =

1 SµM,νN [χµM (r 1 )χµM (r 2 ) + χνN (r 1 )χνN (r 2 )] 2

(6.14)

In the Mulliken approximation the HF operator can be written in the form [221] ∆ Fˆ = − + 2 where

M 

VˆM =

µ



VˆM

(6.15)

M

Pµ [2(. . . |χµM χµM ) − (. . . χµM | . . . χµM )] −

ZM RM

(6.16)

The summation in (6.16) is made over AOs of atom M , Pµ is the Mulliken population of the µth AO, defined as Pµ =

occ  i

2 Ci,µM +

occ N   

N =M

ν

Ci,µM Ci,νN SµM,νN

(6.17)

i

The action of operator VˆM on the MO ϕ is defined by relations (. . . |χµM χµM )ϕ = (ϕϕ|χµM χµM )

(6.18)

(. . . χµM | . . . χµM )ϕ = (ϕχµM |ϕχµM )

(6.19)

As in (6.8) the functions depending on coordinates of the first electron are up to the vertical line, those depending on coordinates of the second electron – after the vertical line. As the valence-electron approximation is supposed to be introduced, the term ZM /RM in (6.16) means the electron interaction with the core of atom M in the pointcharge approximation. As AO χµM (r) can be considered as an eigenfunction of operaˆ tor (− ∆ 2 + VM ) and introducing the point-charge approximation for ZM /RN (N = M ), we obtain the matrix elements of operator (6.15) in the form [222] FµM,µM = εµM (qM ) −

1 − SµM,νN 2



N =M

qN (χµM |

1 |χµM ) rN

FµM,νN = SµM,νN (εµM (qM ) + ενN (qN ))    1 1 qL (χµM | |χµM ) + (χνN | |χνN ) − TµM,νN rL rL

(6.20)

(6.21)

L=M,N

In these expressions, χµM is the µth atomic orbital on the M th atom; εµM (qM ) is the ionization potential of the µth valence orbital on the M th atom with charge qM ; SµM,νN and TµM,νN are the overlap and kinetic energy integrals of the µth and νth orbitals on the M th and N th atom, respectively; (χµM | r1L |χµM ) is the core-attraction integral. The effective charge qM is calculated using the Mulliken population analysis, i.e. qM = Pµ where the AO population Pµ is defined by (6.17). µ

The application of the Mulliken–R¨ udenberg (MR) approximation to calculate the electronic structure not of the free molecule, but of a fragment of an ionic crystal (also

6.1 Extended H¨ uckel and Mulliken–R¨ udenberg Approximations

201

called a molecular cluster), requires the summation over an infinite number of lattice sites in terms corresponding to the interaction of the fragment atoms with those of the remaining crystal. For the N th atom in a binary crystal the field of ions surrounding the considered fragment can be calculated in the point-charge approximation using the formula   Mc  sgn(qL ) VN =− |qR | (6.22) + a RN L L

Here Mc is the Madelung constant, a the nearest-neighbor distance in crystal, qR the charge ascribed to the lattice ions beyond the fragment under consideration, L numbers atoms in the fragment considered. Taking into account (6.22) one can write expressions (6.20) and (6.21) in the form FµM,µM = εµM (qM ) −



L=M

qL (χµM |

1 |χµM ) + V M rL

FµM,νN = SµM,νN (εµM (qM ) + ενN (qN )) ⎧   ⎨  1 1 1 − SµM,νN qL (χµM | |χµM ) + (χνN | |χνN ) ⎩ 2 rL rL L=M,N ⎫ ⎬ +V M + V N − TµM,νN ⎭

(6.23)

(6.24)

The MR approximation was extended to the periodic systems in [222, 223]. To describe the band structure of an infinite perfect crystal in the framework of the LCAO method one should calculate the matrix elements of operator (6.15) using the Bloch sums of atomic orbitals (AO), defined in (4.53):  ϕµk (r) = L−1/2 exp(ikRj )χµ (r − Rj ) j

−1/2

≡L



exp(ikRj )χµj (r)

(6.25)

j

Here, k is the wavevector, µ numbers the AOs in the unit cell, ϕµk (r) is the µth crystal orbital, χµj (r) is the µth AO in the jth unit cell, and L the number of unit cells in the fundamental region of the crystal. It is obvious that summation of core-attraction integrals over the whole lattice is very complicated. The values of these integrals decrease as 1/RM N with increasing distance, i.e. special methods are required to estimate their sums. As the values of core-attraction integrals approximate rapidly the value 1/R when increasing the interatomic distance one can hope that the substitution of the Madelung energy for the sums of integrals would turn out to be a quite satisfactory approximation, at least for ionic crystals. Using the Mulliken approximation in the three-center integrals, and the pointcharge approximation for VM it is shown in [222, 224] that the MR operator matrix elements for a periodic system are given by

202

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

1 FµM,νN (k) = [2εµ (qM , nM ) − M EM (qM ) + 2εν (qn , nN ) − M EN (qN )] 2   1 1 exp(ikRj )SµM j,νN 0 · exp(ikRj )SµM j,νN 0 + (qM + qN ) 2 R M j,N 0 j j  − exp(ikRj )TµM j,νN 0 − δM N δµν εµ (qM , nM ) (6.26) j

Here, the indices µM j denote the element of the µth AO on atom M from primitive unit cell j, defined by translation vector Rj ; εµ (qM , nM ) is the ionization potential of the orbital on atom M with the atomic charge qM and orbital population nM , SµM j,νN 0 and TµM j,νN 0 are overlap and kinetic energy integrals, respectively. The iteration procedure continues until self-consistent effective atomic charges qM and electronic configuration nM are obtained. The Madelung energy M EM at the site of atom M is recalculated at each step of the iterative calculation. It is worth noting that the population-analysis scheme developed for molecules should be applied with caution to calculate the effective charges of atoms in crystals. Thus, according to the Mulliken population analysis that is widespread in molecular calculations, the contribution to the total atomic population is computed proportional to the atomic orbital overlap integrals. In the case of crystals the overlap integrals should be computed with the Bloch sums and, generally speaking, have some meaning other than the molecular ones. To avoid this difficulty L¨ owdin’s population analysis [225] can be used [224] that is based on a symmetrically orthogonalized basis set and that has therefore no problems connected with the distribution of the overlap population. In the cyclic-cluster model the matrix elements (6.26) should be modified, [222]. The AOs χµ (r) have to belong now not only to the atoms in the reference cell but to all the atoms included in the cyclic-cluster. Matrix elements (6.26) are calculated only for k = 0, the summation over the crystal is changed by the summation over the cyclic-cluster atoms. For ionic systems the Madelung field of the surrounding crystal can be taken into account by subtracting from the Madelung energy at the site of an atom the part due to the interaction with atoms directly included in the cyclic cluster. To satisfy the PBC introduction for the cyclic cluster the overlap integrals have to satisfy the condition (χµM (r − Rj + A)χνN (r)) = SµM j,νN where A is the translation vector of the cyclic cluster as a whole (see Chap. 3). The MR approximation was applied for electronic structure calculations of both perfect crystals (alkali halides [222], MgO and CaO [226], PbO [227], corundum [228]), point defects in solids ( [229–234]) and surfaces [224]. The general analysis of R¨ udenberg’s approximation in the HF LCAO method for molecules [218] and solids [223] has shown that EHT and zero differential overlap (ZDO) approximations can be considered as particular cases of R¨ udenberg’s integral approximation. ZDO methods, considered in the next section, were applied to a wide class of molecules and solids, from purely covalent to purely ionic systems. Therefore, they are more flexible compared to the MR approximation, which is more appropriate for ionic systems.

6.2 Zero-differential Overlap Approximations for Molecules and Crystals

203

6.2 Zero-differential Overlap Approximations for Molecules and Crystals 6.2.1 Zero-differential Overlap Approximations for Molecules As was seen in Sec.6.1 in EHT the AO basis functions are only used for the calculation of overlap integrals (molecules) or lattice sums of overlap integrals (crystals). In the MR method kinetic energy integrals or their lattice sums are also included. These integrals in fact can be expressed through overlap integrals. All other contributions to the one-electron Hamiltonian matrix elements are based on empirical parameters. As we have seen, EHT is a nonself-consistent method but the self-consistency over charge and configuration is included in the MR approximation. The Ab-initio HF SCF method requires the self-consistent calculation of the density matrix (see Chap. 4). This feature of the HF approach is maintained in the semiempirical methods, based on the zero differential overlap (ZDO) approximation. This approximation is used to reduce the number of multicenter integrals appearing in HF LCAO calculations. In the ZDO approximation the differential overlap χµ (r 1 )χν (r 2 )dr 1 dr 2 of valence AO basis functions is supposed to be zero for any µ = ν both for r 1 = r 2 and r 1 = r 2 . The ZDO / approximation means that the AO basis is assumed to be orthogonal (Sµν = χµ (r)χν (r)dr = δµν ). A recent review by Bredow and Jug [235] gives a brief summary of the basis features of ZDO semiempirical methods together with examples of their use. These authors are convinced that “the development of semiempirical methods and their extension to a growing number of research areas has been a continuous process over the last 4 decades and there is apparently no end to be seen”. This is demonstrated by the large number of semiempirical studies in organic, inorganic and physical chemistry, biochemistry, drug design, crystallography and surface science. Depending on the level of the approximations used for other integrals ZDO methods differ. In the CNDO (complete neglect of differential overlap) method [205, 236] all two-electron integrals are approximated by Coulomb integrals according to  1 (µν|λσ) = χµ (r 1 )χν (r 1 ) χλ (r 2 )χσ (r 2 )dr 1 dr 2 = δµν δλσ (µµ|λλ) (6.27) r12 and only two-center electron-repulsion integrals (µµ|λλ) = γM N are retained (M and N are the atoms on which basis functions χµ (r) and χν (r) reside, respectively). The independence of this integral on the angular part of AOs restores the AOs hybridization invariance of the original HF operator matrix elements, i.e. it is supposed that (SM SM |SN SN ) = (PM PM |PN PN ) = (PM SM |PN SN ) = γM N . The two-center Coulomb integral γM N can either be computed explicitly from s-type STOs (6.1) or it can be treated as a parameter. The one-center Coulomb integral γM is parametrized using a so-called Pariser–Parr [237] approximation γM = IM −AM , where IM and AM are the atomic ionization potential and electron affinity, respectively. The parameter γM can be expressed with a commonly tabulated semiempirical parameter Uµµ (the energy of interaction of electron-occupying AO χµ (r) with the core of atom M ): Uµµ = −Iµ − (Zµ − 1)γM

(6.28)

204

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

Uµµ = −0.5(Iµ + Aµ ) − (ZA − 1/2)γM

(6.29)

Equations (6.28) and (6.29) are used in CNDO/1 and CNDO/2 methods, respectively. For the two-center integral γM N , the Mataga–Nishimoto [238] γM N (eV ) = or Ohno [239]

14.3986 14.3986 , δ(eV ) = RAB + δ (γAA + γBB )1/2

(6.30)

14.3986 γAB (eV ) = √ RAB + δ

(6.31)

˚) is the interatomic distance. At large distance, formulas are adopted, where RAB (A γAB in both cases goes to 1/RAB , as expected for widely separated charge clouds, while at short distances, it approaches the average of the two one-center parameters. The one-electron terms for offdiagonal matrix elements are defined as hµν = βµν = 0.5(βM + βN )Sµν

(6.32)

where Sµν is the overlap matrix element computed using Slater-type basis functions χµ (r) and χν (r), centered on atoms M and N , respectively; the βM , βN values are semiempirical parameters. Note that computation of the overlap is carried out for every combination of basis functions, even though in the secular equation FC = CE itself S is defined in ZDO approximation as Sµν = δµν . There are, in effect, two different S matrices, one for each purpose. The β parameters are entirely analogous to the parameters β in EHT – they provide a measure of the strength of through-space interactions between atoms [240]. As β parameters are intended for completely general use it is not necessarily obvious how to assign them a numerical value, unlike the situation that obtains in EHT. Instead, β values for CNDO were originally adjusted to reproduce certain experimental quantities. The diagonal Fµµ and nondiagonal Fµν matrix elements in the CNDO approximation for molecules are defined by  Fµµ = Uµµ + (PM − 1/2Pµµ ) γM + (PN − ZN ) γM N (6.33) N =M

Fµµ′ = −0.5Pµµ′ γM

(6.34)

Fµν = βM N Sµν − 0.5Pµν γM N

(6.35)

AOs χµ and χµ′ in (6.34) are supposed to belong to the same atom M . In (6.34) ZM is the atomic-core charge, Pµν are the density matrix elements in the LCAO A approximation (see (4.37)), PM = µ Pµµ is the electron population of atom M , the resonance integral βµν is taken as βM N , i.e. depends only on the atom type, but not on a particular orbital of this atom. The CNDO method represents a vast simplification of HF theory, reducing the number of two-electron integrals having nonzero values from formally N 4 to N 2 . Furthermore, these integrals are computed by trivial algebraic formulae, not by explicit integration, and between any pair of atoms all of the integrals have the same value irrespective of the atomic orbitals involved. Similarly, evaluation of one-electron integrals is also entirely avoided (excluding overlap integrals), with numerical values for those portions of the relevant matrix elements coming from easily

6.2 Zero-differential Overlap Approximations for Molecules and Crystals

205

evaluated formulae. Historically, a number of minor modifications to the conventions outlined above were explored, and the different methods had names like CNDO/1, CNDO/2. CNDO/BW, etc. [205]. The computational simplifications inherent in the CNDO method are not without chemical cost, as might be expected. Like EHT, CNDO is quite incapable of accurately predicting good molecular structures. Furthermore, the electronic interactions on a single atom are not correctly reproduced due to the ZDO approximation for the different AOs of the same atom. In an attempt to overcome this deficiency of the CNDO scheme the intermediate neglect of differential overlap (INDO) approximation was introduced [241] to permit a more flexible handling of electron–electron interactions on the same center. In this case, the different values of one-center two-electron integrals are used for different AOs: (ss|ss) = Gss , (ss|pp) = Gsp , (pp|pp) = Gpp , (sp|sp) = Lsp . These integrals are in practice estimated from spectroscopic data. In the INDO scheme the valence bond angles are predicted with much greater accuracy than is the case for CNDO. Nevertheless, overall molecular geometries predicted from INDO tend to be rather poor. Preliminary efforts to address this problem have been reported only recently [242]. A careful parametrization of INDO for spectroscopic problems [243] was described in an INDO/S calculation scheme whose parametrization was later extended to most of the elements in the periodic table [244]. In a purely terminological sense one can make a destinction between the INDO semiempirical method and the INDO/S model [102]. The latter is a particular parametrization of the INDO method designed for spectroscopic applications. The MINDO/3 model [245], the third version of the modified INDO method, included some modifications: different orbital exponents were used for s- and p- orbitals on the same atom, resonance integrals βM N between two atoms were split into pairs corresponding to s − s, s − p, p − p orbital interactions, some empirical modifications to the nuclear repulsion energy were introduced. The MINDO/3 model allowed prediction of heats of formation with the mean absolute error of 11 kcal/mole, 0.7 eV for ionization potentials, 0.022 ˚ Afor bond lengths. In both CNDO and INDO methods the two-center two-electron integral takes the value (µµ|νν) = βM N , irrespective of which orbitals on atoms M and N are considered. The neglect of diatomic differential overlap (NDDO) method [236] is an improvement over the INDO approximation, since the ZDO approximation is applied only for orbital pairs centered at different atoms. Thus, all integrals (µν|λσ) are retained provided µ and ν are on the same atomic center and λ and σ are on the same atomic center, but not necessarily the center hosting µ and ν. In principle, the NDDO approximation should describe long-range electrostatic interactions more accurately than INDO. Most modern semiempirical models (MNDO, AM1, PM3) are NDDO models. The modified neglect of the diatomic overlap (MNDO) method [246] led to improved agreement with experiment. In the two-electron integrals calculation the continuous charge clouds were replaced with classical multipoles. Thus, an ss product was replaced with a point charge, an sp product was replaced with a classical dipole (represented by two point charges slightly displaced from the nucleus along the p orbital axis), and a pp product was replaced with a classical quadrupole (again represented by point charges). The magnitudes of the moments, being one-center in nature, are related to the parameterized integrals appearing in the INDO method. By adopting such a form for the integrals, their evaluation is made quite simple, and so too is

206

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

evaluation of their analytic derivatives with respect to nuclear motion. To complete the energy evaluation by the MNDO method, the nuclear repulsion energy is added to the SCF energy. The parameters of the MNDO model were optimized against a large test set of molecular properties (within the assumption of a valence orbital set comprised only of s and p orbitals). In addition, a modified MNDO model explicitly adding electron-correlation effects (MNDOC) by second-order perturbation theory was described by Thiel [247]. By explicitly accounting for electron correlation in the theory, the parameters do not have to absorb the effects of its absence from HF theory in some sort of average way. Later, two modifications of MNDO were introduced [102,235]. The most prominent of these are the Austin model 1 (AM1) by Dewar et al. [246] and the parametric method 3 (PM3) by Stewart [248]. In principle MNDO, AM1 and PM3 methods differ only in the parametrization and in the empirical function fM N in the core–core repulsion  ∗ ∗ Vnn = ZM ZN γM N + fM N (6.36) M >N

where

∗ ∗ ZN γM N (exp(−αM RM N ) + exp(−αN RM N )) fM N = ZM

and Z ∗ is the effective core charge. A variety of modifications of the original methods is now available. AM1 and PM3 have been extended for the treatment of transition-metal compounds by inclusion of d orbitals in the valence basis; the Green’s function technique has been implemented in MNDO-type methods for the calculation of ionization potentials and electron affinities; a parameterized variational technique is used for the calculation of molecular polarizabilities and hyperpolarizabilities within the MNDO, AM1 and PM3 methods [235]. The most important modifications of the MNDO method are the use of effective core potentials for the inner orbitals and the inclusion of orthogonalization corrections in a way as was suggested and implemented a long time ago in the SINDO1 method [249] at first developed for organic compounds of first-row elements and later extended to the elements of the second and third row [250, 251]. The most important feature of the SINDO1 method is that an orthogonalization transformation of the basis functions is taken into account explicitly in solving the HF LCAO equations. The one-electron integral matrix H is transformed to L¨ owdin symmetrically orthogonalized [225] AOs χλ = S−1/2 χ Hλ = S−1/2 HS−1/2

(6.37)

Matrix S−1/2 can be expanded in a series S = I+σ = I − 1/2σ + 3/8σ 2 − · · ·

−1/2

S

(6.38)

where I is the unit matrix and σ the remaining two-center overlap matrix. The expansion is truncated in such a way that only terms up to second order in the overlap are retained.

6.2 Zero-differential Overlap Approximations for Molecules and Crystals

207

Another special feature of SINDO1 is the treatment of inner orbitals by a local λ pseudopotential introduced in [252]. Two-center one-electron integrals Hµν are calculated by the following empirical formula: λ Hµν = Lµν + ∆Hµν , µ ∈ M, ν ∈ N

(6.39)

Here, L is a correction to the Mulliken approximation for the kinetic energy, and ∆H is entirely empirical and contains adjustable bond parameters. These are optimized in order to minimize the deviation from experiment for a set of reference compounds. Two sets of Slater-orbital exponents are used. One (ζ U ) for intra-atomic integrals, and the other (ζ) for interatomic integrals. Experimental heats of formation are calculated from binding energies EB , which are corrected by the zero-point energies obtained from vibration analyses. This is theoretically more sound than in MNDO, AM1 and PM3, where binding energies are parameterized directly to reproduce experimental heats of formation without reference to zero-point energies. Recently, a new version MSINDO was developed by substantial modifications in the SINDO1 formalism. The parameters are now available for the elements H, C–F, Na–Cl, Sc–Zn, and Ga–Br [253–256] for Li–B and K–Ca, [257]. In MSINDO the standard basis set for elements Al–Cl has been changed from {3s, 3p} to {3s, 3p, 3d} in order to account for hypervalent compounds [253]. For compounds containing Na and Mg an inclusion of 3d functions was considered inconsistent, because these atoms already contain 3p functions for polarization. Moreover, test calculations showed that the 3d functions on these atoms had only insignificant effects on the molecular properties. As for SINDO1 the H basis set can be augmented with a 2p shell for the treatment of hydrogen bonds. All Slater–Condon atomic parameters are calculated analytically for the one-center two-electron integrals and one-electron integrals Uµµ . For the higher multipole terms, this differs from SINDO1, where these terms were taken from experimental spectra. The MSINDO procedure is more consistent since all parameters are derived at the same level of theory. To maintain rotational invariance a number of one-center hybrid integrals have to be included in the case of d functions [258]. This was already implemented in SINDO1 and was kept in MSINDO. The core integrals U3d of second- and third-row elements were scaled by a screening potential Ksc in order to avoid unrealistically high populations for the 3d shell: ′ U3d = (1 − Ksc )U3d

(6.40)

For second-row elements a fixed value of Ksc = 0.15 is used. For third-row elements U3d , U4s and U4p were scaled with different screening potentials [256]. The most important change in MSINDO with respect to SINDO1 is a modification of the approximate L¨ owdin orthogonalization of the basis [253]. Only the first-order terms in overlap are retained in (6.38). In SINDO1 the expansion was to second order. If only first-order terms are taken into account, no transformation of the two-electron integrals is necessary. The one-electron integrals are transformed  N ) λ ′ = Hλ ′ − f M 1 H (Lµν ′ Sνµ′ + Sµν ′ Lνµ′ ) (6.41) µµ µµ 2 ν N =M

The correction factor, f M , accounts for the neglect of higher-order terms in the truncated expansion (6.38). Its value depends on the number of basis functions on atom M . f M is 1 for an {s} basis, 0.75 for an {s, p} basis and 0.5 for an {s, p, d} basis.

208

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

We considered SINDO1-MSINDO methods in more detail as these methods were successfully applied in calculations of bulk solids and surfaces in the embedded and cyclic-cluster models (see Sect. 6.3). The role of long-range interactions in solids increases, compared to the case of molecules. In order to better describe long-range interactions, in particular at surfaces, dipole–monopole and dipole–dipole terms were added to the MSINDO formalism following an early suggestion by Voigt [259]. After modification of the formalism a complete reparameterization of all elements had to be performed. The new version, called MSINDO+, was tested for some cases where SINDO1 and MSINDO gave results in disagreement with experiment. It should be noted that an analysis of some systematic errors of the ZDO approximation [260] allowed an improved semiempirical approach to be developed [261]. In this approach the R¨ udenberg approximation is used for diatomic overlap densities appearing in Coulomb integrals, the Fock matrix is simplified such that its construction scales with N 2 instead of N 4 in ab-initio methods, if N is the dimension of the basis set. Thus, the one-electron and two-electron Coulomb parts of the Fock matrix are formulated explicitly in an atomic orbital (AO) basis, whereas the ZDO approximation is restricted to the two-electron exchange part. The complete two-electron Coulomb part of the Fock matrix is explicitly subjected to the L¨ owdin transformation. The proposed formalism is not necessarily an empirical one because, in principle, all matrix elements can be calculated exactly. Since only two-center integrals appear one can use a Slater instead of the Gaussian basis of ab-initio methods. However, if the formalism is restricted to the valence electrons as in normal semiempirical methods some parametrization is unavoidable. In this case, an additional pseudopotential accounting for the effects of core-valence orthogonality should be implemented. It may also be useful to absorb possible errors arising from the R¨ udenberg approximation into the parametrization of the two-electron integrals. Hybrid approaches combining ab-initio or DFT and semiempirical approaches have become popular. As an example, we can refer to LEDO (limited expansion of differential overlap) densities application to the density-functional theory of molecules [262]. This LEDO-DFT method should be well suited to the electronic-structure calculations of large molecules and in the authors’ opinion its extension to Bloch states for periodic structures is straightforward. In the next sections we discuss the extension of CNDO and INDO methods to periodic structures – models of an infinite crystal and a cyclic cluster. 6.2.2 Complete and Intermediate Neglect of Differential Overlap for Crystals The first applications of ZDO methods for extended systems refer to the electronicstructure calculations of regular polymer chains when the one-dimensional (1D) periodicity is taken into account. The corresponding modifications of molecular ZDO equations can be found in the literature: for the CNDO method in [263–266], for the INDO and MINDO methods in [267, 268], for the MNDO, PM3 and AM1 methods in [269–272]. The CNDO method extended to the two-dimensional (2D) periodicity case was applied in regular chemisorption studies of hydrogen and oxygen on a graphite surface [207, 273–275]. The equations of the CNDO method for three-dimensional (3D) solids

6.2 Zero-differential Overlap Approximations for Molecules and Crystals

209

were given in [207, 273, 275–281]; the periodic MINDO method is considered in [282– 284]. The main features of the CNDO and INDO approaches to periodic systems are similar to those used for molecules. A valence-electron approximation is adopted, which implies that only the valence electrons are in the bonding region and are polarized by the presence of neighboring atoms [277]. For periodic systems the LCAO approximation is based on use of the Bloch sums (4.53) of AOs χµn (r) = χµ (r − Rn ) numbered by index µ (labels all AOs in the reference primitive unit cell) and by the direct lattice translation vector Rn (n = 0 for the reference cell). In the ZDO approximation AOs are supposed to be orthogonal both in the intracell and intercell overlap integrals  Sµ0,νn = χµ0 (r)χνn (r)dr = δ0n δµν (6.42) 0n The two-electron integrals are approximated by Coulomb integrals γM N , calculated with s functions of the M th atom from reference cell and the N th atom from the cell n: 0i (µ0, νn|λi, σi′ ) = δ0n δµν δii′ δλσ γM (6.43) N

The one-electron matrix elements Hµ0,νn are approximated by βM N S0µ,νn , where the resonance integrals βM N depend only on the type of atoms M and N to which the AOs µ and ν refer. In particular, in the CNDO/2 version of the CNDO method for the crystal the diagonal one-electron matrix elements are taken in the form  0n 00 Hµ0,µ0 = Uµµ + ZM γM ZN γM (6.44) N N − n,N

The difference of (6.44) from its molecular analog is defined by the lattice summation over all atoms N (including M = N ) in the reference cell and in different unit cells of a crystal. In the model of an infinite crystal these lattice sums are infinite. All the simplifications mentioned are introduced in the Fock and overlap matrices (4.56) and HF LCAO equations (4.57) for periodic systems so that one obtains instead of (4.56) and (4.57):  ZDO Sµν δ0n δµν exp(ikRn ) = exp(ikR0 ) (6.45) (k) = (

n

ZDO Fµν (k) exp(ik(Rn

ν

3 − R0 )) − Ei (k)Ciµ (k) = 0

(6.46)

Let R0 , the lattice vector of the reference cell, correspond to the origin of the coordinate system. Then the core (H) and Fock (F) matrix elements have the following form within the CNDO formalism 00 Hµµ (k) = Uµµ + ZM γM M −

Hµν =

L−1  n=0

  L−1 N n=0

00 0n βM N Sµν exp(ikRn )

0n ZN γM N +

L−1 

0 0n βM Sµµ exp(ikRn )

n=1

(6.47)

210

6 Semiempirical LCAO Methods for Molecules and Periodic Systems L−1

Fµµ (k) = Hµµ (k) +

1  0n Pνν (k′ )γM N L n=0 ′ N,ν

− Fµν (k) = Hµν (k) −

1 2L

k

L−1  n=0 k′

0n ′ Pµµ (k′ )γM N exp(i(k − k )Rn )

L−1 1  0n ′ Pµν (k′ )γM N exp(i(k − k )Rn ) 2L n=0 ′

(6.48)

k

As in the HF LCAO method the calculation of the wavevector of the k-dependent density matrix occ ∗ Ciµ (k)Ciν (k) (6.49) Pµν (k) = 2 i

requires the summation over occupied crystalline orbitals (i) that are themselves defined as a linear combination of the basis atomic orbitals. The HF method allows both an all-electron calculation and a valence-electron approximation when the atomic cores pseudopotentials are introduced. In both cases the AOs are represented by GTO. In the CNDO method for crystals only the valence atomic orbitals are included and represented by a minimal Slater basis set. We return to the basis-sets consideration in Chap. 8. Equations (6.47) and (6.48) contain an explicit k dependence via the phase factors exp(ikRn ) and an implicit k-dependence via summations over k′ . Invoking the special k-points theory (see Sect. 4.2.2) one need only use a small set of k′ -points to approximate the integral over BZ. 0n 0n In (6.48) and (6.49), Sµν and γM N are the overlap and Coulomb integrals for atomic orbital µ on atom M in the primitive unit cell 0 and atomic orbital ν on atom N in the cell Rn . Uµµ describes the interaction of an electron with the atomic core of the atom M with the core charge ZM (this is equal to the number of valence electrons of atom M ). The Coulomb integrals γM N and the bonding parameters βM N are assumed to be orbitally independent. It follows from (6.49) that in the CNDO approximation the nonlocal exchange is taken into account as nondiagonal elements of the Fock matrix contain nondiagonal elements Pµν (k′ ) of the density matrix. This means that lattice sums in this case are divergent, see Sect. 4.3.3. Indeed for sufficiently large Rn the two-electron integrals 0m γM N in the exchange part of (6.48) may be approximated by 1/|r M + r N − Rn | where r M , r N are the vectors defining the positions of atoms M and N in the reference cell. Therefore, the convergence of the lattice sum over n is defined by the convergence of the lattice sum  exp(i(k − kj )Rn ) Sj (k) = (6.50) |Rn + r m − r N | n

The sum (6.50) can be calculated for k = kj , for example, by the Ewald method. However, for k = kj the series (6.50) appears to be divergent [95]. This divergence is the result of the general asymptotic properties of the approximate density matrix calculated by the summation over the special poits of BZ (see Sect. 4.3.3). The difficulties connected with the divergence of lattice sums in the exchange part have been resolved in CNDO calculations of solids by introduction of an interaction radius

6.3 Zero-differential overlap Approximation in Cyclic-cluster Model

211

for exchange [276, 277] or of distance-dependent modulating functions that weight certain Coulomb interaction terms [280]. Detailed studies of the HF LCAO density matrix properties (see Sect. 4.3.3) allow an interpolation procedure to be suggested for constructing an approximate density matrix for periodic systems, which ensures a balance between the direct lattice and BZ summations. Furthermore, this analysis is important for the cyclic-cluster ZDO calculations as it allows an additional parameter (exchange radius) introduction to be omitted (see Sect. 6.3). The extension of INDO and MINDO semiempirical methods to periodic systems has no principal differences compared with the CNDO method. The advantage of these methods is the possibility to make spin-dependent calculations as is done in the UHF method. The considered CNDO method for periodic systems formally corresponds to the model of an infinite crystal or its main region consisting of L primitive cells. This semiempirical scheme was also applied for the cyclic-cluster model of a crystal allowing the BZ summation to be removed from the two-electron part of matrix elements. In the next section we consider ZDO methods for the model of a cyclic cluster.

6.3 Zero-differential overlap Approximation in Cyclic-cluster Model 6.3.1 Symmetry of Cyclic-cluster Model of Perfect Crystal In Sect. 4.2.1 we introduced supercell transformation (4.77) in the direct lattice allowing generation of special points of the BZ in the calculation of the one-electron density matrix of the perfect crystal. In this consideration, the perfect crystal was supposed to be infinite or represented by its main region. The latter was defined as a block on which opposite-sides periodic boundary conditions are imposed. The main region of a crystal can be called a cyclic cluster of huge size (in the shape of a parallelepiped with large edges) modeling the infinite crystal and maintaining its translation symmetry. The idea to use relatively small cyclic clusters for comparative perfect-crystal and point-defect calculations appeared as an alternative to the molecular-cluster model in an attempt to handle explicitly the immediate environment of the chemisorbed atom on a crystalline surface [285] and the point defects in layered solids [286, 287] or in a bulk crystal [288,289,292,293]. The cluster is formed by a manageable group of atoms around the defect and the difference between the molecular-cluster model (MCM) and the cyclic cluster model (CCM) is due to the choice of boundary conditions for the one-electron wavefunctions (MOs). Different notations of CCM appeared in the literature: molecular unit cell approach [288], small periodic cluster [286], large unit cell [289, 290]. We use here the cyclic cluster notation. In MCM (as in molecules) MOs are supposed to be orthonormalized in the whole space; this condition is also fulfilled for the molecular clusters embedded by some or another means into the crystalline environment. Recent applications of the molecularcluster model and MO calculations for materials design in the Hartree–Fock–Slater method are discussed in [291]. In the CCM model the periodic boundary conditions are introduced for MOs of a cluster having the shape of a supercell of a perfect crystal so that MOs are

212

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

orthonormal in the field of the cyclic cluster chosen. Postponing to Chap. 10 the more detailed discussion of molecular models of defective crystals we would like to note here the difference between the supercell model (SCM) and CCM for point defects. In the former, PBC are introduced for the main region of a crystal so that the point defect is periodically repeated over the crystalline lattice, in the latter the single point defect is considered. This means that CCM is conceptually a supercell-type approach but is technically more closely related to the simple MCM [294]. We discuss here the symmetry of CCM for perfect crystal [13, 295–299]. The symmetry of defective crystal in CCM is considered in Chap. 10. To define a finite cyclic system, let us make a linear transformation of the primitivelattice translation vectors  Aj = lji aj , L = | det l| ≥ 1 (6.51) i

where the integer coefficients lji form the matrix l. The transformation (6.51) for L > 1 determines a supercell (large unit cell) of the direct lattice. It may be chosen in the form of a parallelepiped with vectors Aj as edges or in the form of the corresponding Wigner–Seitz unit cell. The particular form of the matrix l in (6.51) defines the supercell shape and its volume (which is L times larger than that of a primitive unit cell) and the symmetry of the direct lattice based on the group TA of the translations An =

3 

nj A j ,

nj are arbitrary integers

(6.52)

j=1

The group TA is an invariant subgroup of Ta (translation group of the infinite lattice with primitive translation vectors ai ) so that the cosets (E|a(i) )TA (i = 1, 2, . . . , L) in the decomposition L  Ta = (E|a(i) )TA (6.53) i=1

form the factor group Ta /TA = T (A) of order L. The so-called inner translations of the supercell are assumed to be chosen as a(i) in (6.53). Figure 6.1a shows the supercell  ofthe plane hexagonal lattice of boron nitride, 30 BN, formed by the diagonal l = matrix, with L = 9. 03 (A) is defined as a supercell with identical opposite faces, i.e. A cyclic cluster C the periodic boundary conditions are introduced for the chosen supercell itself (not for the main region of a crystal!). In particular, in the supercell, shown on Fig. 6.1a, the atoms with the primed numbers are supposed to be identical with the atoms of the supercell, having the same unprimed numbers. This means that the translation of a supercell as a whole is equivalent to the zero translation. The translation symmetry of C (A) is characterized by a three-dimensional cyclic group T)(A) of order L with the elements (E|a(i) ) from (6.53) and multiplication law modulo TA . In our example, this group consists of 9 inner translations of the B9 N9 supercell, i.e. translations of the BN primitive unit cell, consisting of one formula unit. The group T)(A) is isomorphic to the factor group T (A) .

6.3 Zero-differential overlap Approximation in Cyclic-cluster Model

213

Fig. 6.1. Supercell (a) and small Brillouin zone (b) for hexagonal plane lattice of boron nitride BN. Atoms 1–18 belong to the supercell, the atoms with the primed numbers are supposed to be identical with the corresponding atoms, belonging to the supercell.

Let l(a) (R) be the transformation matrix of the translation vectors ai under the point-symmetry operation R ∈ F  (a) Rai = li′ i (R)ai′ (6.54) i′

The corresponding transformation matrix for the translation vectors Aj in (6.51) is  (A) lj ′ j (R)Aj ′ , l(A) (R) = l−1 l(a) (R)l (6.55) RAj = j′

The operation (R′ |v ′ + an ) ∈ G is compatible with the translation symmetry of the lattice composed of supercells, if the vectors R′ Aj are integer linear combinations of

214

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

the vectors Aj , i.e. the matrix l(A) (R′ ) is integer. All these operations (R′ |v ′ + an ) form a group G′ ⊂ G. The rotations R′ form a point group F′ ⊂ F of order nF′ ≤ nF . As (R′ |v ′ + an )(E|Aj )(R′ |v ′ + an )−1 = (E|R′ Aj ) (6.56) the translation group TA is an invariant subgroup of the group G′ . The cosets in the decomposition n F′ L   G′ = (Rs′ |v ′s + a(i) )TA (6.57) i=1 s=1

form the factor group G(A) = G′ /TA of the order nF′ L. The coset representatives (Rs′ |v ′s + a(i) ) in (6.57) contain the inner translations (i) a of the supercell (i = 1, 2, . . . , L) and rotational parts R′ ∈ F′ forming the point group of the space group G′ . Let us introduce a modified multiplication law modulo TA , which does not distinguish between the translations of the group TA . The set of nF′ L elements (Rs′ |v ′s +a(i) ) ) (A) (modulo TA ), which is the symmetry group of the cyclic cluster forms a group G (A) ) (A) is isomorphic to the factor group G(A) . Both groups (G ) (A) and C . The group G (A) ′ G are homomorphic images of the space group G . The translation group TA is the kernel of this homomorphism. If the space group G′ coincides with the space group G the transformation (6.51) is called symmetric. In this case, the point symmetry of a cyclic cluster coincides with that of an infinite crystal. In our example, the cyclic cluster consisting of 9 primitive unit cells of hexagonal BN (see Fig. 6.1a) has the same point symmetry as the hexagonal BN in the one-layer model. The symmetric transformation (6.51) retains the point symmetry of the Bravais lattice, but it is compatible with a change of its type in the framework of the same crystalline system. As an example, one can consider the cyclic cluster defined by a crystallographic unit cell for face-centered cubic lattice (see Chap. 2) or the supercell of a hexagonal  lat2 1 tice, generated by the transformation with nondiagonal matrix l = , with −1 1 L = 3. In the first ⎛ case, the⎞translation vectors of the cubic cluster of 4 primitive −1 1 1 unit cells (l = ⎝ 1 −1 1 ⎠ , L = 4) form a simple cubic lattice. In the second 1 1 −1 case the lattice of supercells remains hexagonal. The nonsymmetric transformation (6.51) leads to a cyclic cluster with the point-symmetry group F′ that is lower than that of an infinite crystal. The smallest possible cyclic cluster C (A) is a primitive ) (a) of the order nF (F ) (a) ↔ F). The so-called unit cell with the symmetry group G main region of a crystal is also a cyclic cluster corresponding to the transformation (6.51) with very large L = N1 N2 N3 ; it is assumed that there are Ni primitive unit cells in direction ai (i = 1, 2, 3) (where Ni is a very large number). When the cyclic boundary conditions are introduced for the main region of a crystal, the translation group TA consists of translations Ai = Ni ai (i = 1, 2, 3), i.e. the transformation matrix l in (6.51) is assumed to be diagonal. Usually no attention is paid to the fact that the main region possesses the point symmetry of an infinite crystal only if the corresponding transformation (6.51) is symmetric. For example, the main region for a cubic crystal has to be defined with N1 = N2 = N3 . The space group G of the infinite

6.3 Zero-differential overlap Approximation in Cyclic-cluster Model

215

crystal may be obtained as a limit of the symmetry groups of a sequence of increasing cyclic systems. As is seen, the symmetry operations in the cyclic-cluster symmetry group are defined with the modified multiplication law modulo TA . These groups were named by Stewart [299] “ the symmetry groups of unit cells in solids” and interpreted as a new type of group being intermediate between point-symmetry groups of molecules and space groups of infinite crystals. The irreducible representations of these groups are defined by those of space groups for the points of the BZ satisfying the condition exp(ikAj ) = 1 where Aj are the translation vectors of the cyclic-cluster as a whole. These points are given by (4.84) for k = 0 and can be easily found. All the possible transformation matrices, given in Appendix A, can be used to generate the symmetric cyclic clusters of any of the 14 Bravais lattices. In the cyclic-cluster calculations both the point and inner translation symmetry can be taken into account [300]. The CCM model allows real-space calculations (formally corresponding to the BZ center for the infinite crystal composed of the supercells). From this point of view the cyclic cluster was termed a quasimolecular large unit cell [289] or a molecular unit cell [288]. The practical cyclic-cluster calculations for crystals were made by EHT, MR and different ZDO methods. In these calculations one has to take into account the multiplication law of the cyclic-cluster symmetry group. This requires the modifications (compared with molecules) of Fock matrix elements in the LCAO approximation. These modifications are considered in the next sections. 6.3.2 Semiempirical LCAO Methods in Cyclic-cluster Model In cyclic-cluster calculations we return to the molecular level without the loss of the symmetry, replacing a whole crystal by one supercell (multiple of the primitive unit cell), applying to it PBC and embedding a cyclic cluster in the Madelung field of the surrounding crystal. Instead of the system of coupled LCAO equations (4.57) for different wavevectors in the BZ we have one equation to be solved in each iteration as in the case of molecules. In EHT for crystals the one-electron Hamiltonian and overlap integrals matrix elements (6.4) and (6.5) depend on wavevector k and are the sums over a direct lattice. The order M of the corresponding matrices H and S is equal to the number of AOs in the primitive unit cell. In the CCM the supercell is introduced so that the order of the matrices in the secular equation (6.4) is equal to L × M , where L is defined in (6.51) and means the number of primitive cells in a supercell. The calculation is made only for k = 0 so that instead of (6.4) we obtain the molecular-type seqular equation det |Hµν − εi Sµν | = 0

(6.58)

where µ, ν, i change from 1 to L × M . The difference between the Hamiltonian and overlap matrices in (6.58) from the molecular analog (when the supercell atoms are taken as a free molecular cluster) is due to the introduction of PBC for the supercell chosen. Instead of lattice sums (6.5) we have now the matrix elements calculated for all L×M AOs of a supercell. PBC are taken into account by modification of these matrix

216

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

elements. To show this modification let us consider a cyclic cluster B9 N9 of the onelayer model of hexagonal boron nitride BNhex , see Fig.6.1. The primitive unit cell in this case contains one formula unit BN, the cyclic cluster chosen is formed by threefold increase in both translation vectors of the primitive unit cell. The central cyclic cluster and the nearest translated atoms are shown in Fig. 6.1. The primed B and N atoms are not included in the cyclic cluster explicitly but are translation equivalent (with the supercell translation vectors) to the corresponding nonprimed atoms inside the cyclic cluster. As was shown in Sect. 6.3.1, due to PBC introduction the cyclic-cluster translations are multiplied modulo the translation group TA of supercell as a whole (in our example this group consists of two supercell basic translations A1 = 3a1 , A2 = 2 3a2 and all their combinations An = i=1 ni Ai with integer coefficients ni ). As a result the matrix elements of H and S matrices are modified. The interactions between atoms in the supercell and those outside are then used to replace their weaker analog within the supercell [285]. For example, boron atom 1 interacts with nitrogen atoms 14 and 6 in the supercell as with the nearest neighbors because in atomic pairs 14– 14’,6–6’ two atoms are connected by the translation vectors of a cyclic cluster as a whole (see Fig. 6.1). Thus, we have no more “central” and “boundary” atoms in the cyclic cluster – for all of them the interactions with the nearest, next-nearest and next-next-nearest neighbors are taken into account. The cyclic cluster can be chosen in the form of the Wigner–Seitz unit cell (shown by the dotted line in Fig. 6.1 with the center at boron atom 1). A connection of the interaction range to this cells atoms was discussed in [301]. PBC introduction for the cyclic cluster chosen allows connection by of symmetry the MOs of the cyclic cluster with some COs of a whole crystal [297]. Let a perfect crystal be described in terms of supercells composed of L primitive unit cells. Correspondingly, the reduced (small) BZ of the supercell is a factor of L smaller than the original BZ of the primitive unit cell. If wavevectors in the original BZ are denoted by K and wavevectors in the reduced (small) BZ by k, a calculation at a single k-point is equivalent to a calculation at a particular set of K-points satisfying relation (4.84) determined by the translation vectors An of the supercell chosen. This “folding back” of information was used to generate special points of BZ in the model of an infinite crystal, see Sect. 4.2.2 and also forms the basis of the cyclic-cluster model. When the whole crystal is replaced by a cyclic cluster, the k′ = 0 approximation in the reduced BZ is made and (4.84) can be written in the form  ¯ (0) = K qtj bj (6.59) t j

¯ (0) form the set where qtj are integers, bj are translation vectors of a reduced BZ and K t of K-points of the original BZ folding down onto the k = 0 point of a reduced BZ. Due to the relation (Ai bj ) = 2πδij between supercell translation vectors Ai , i = 1, 2, 3 and small BZ translation vectors bj , j = 1, 2, 3 , (6.59) becomes equivalent to the condition ¯ (0) Aj ) = 1, j = 1, 2, 3 exp(iK (6.60) t that has to be satisfied for those K-points of the original BZ that fold down on k = 0 point of the reduced BZ. In our example of a hexagonal lattice supercell with L = 9 (Fig. 6.1b) the relation (6.60) is satisfied for three points of the plane hexagonal BZ, Γ (0, 0), 2P (1/3, 1/3),

6.3 Zero-differential overlap Approximation in Cyclic-cluster Model

217

6G(1/3, 0) (the integer numbers mean the number of rays in the stars, the coordinates of stars representatives from the irreducible part of the BZ are given in brackets). These points formally become equivalent to the Γ (k = 0) point of the primitive-cell BZ [289]. Therefore, the cyclic-cluster energy level degeneration differs from that which would be for the corresponding free cluster of the same atoms. In the latter case, the point symmetry of the cluster is C3v , so that only the degeneracy of levels can be one or two (dimensions of irreps of point group C3v ). In the former case, the degeneracy of MOs remains at 1, 2 only at the Γ point of the BZ. The one-electron states at P and G points are 2-, 4- and 6-times degenerate, respectively. It becomes clear when one takes into account that the space-group irrep dimension is the product of the dimension of the irrep of the wavevector point group (C3 for P point, C1 for G point) times the number of rays in wavevector star (2, 6 for P and G points, respectively, see Chap. 3). It is also necessary to take into account the time-inversion symmetry making additional degeneracy for k and −k values of the wavevector. What happens when the cyclic cluster is increased? Depending on its shape and size different sets of k-points are reproduced, but in the EHT matrix elements the number of interactions included (interaction radius) increases as the periodically reproduced atomic sites distance is defined by the translation vector of a cyclic cluster as a whole. It is important to reproduce in the cyclic-cluster calculations the states defining the bandgap. As the overlap matrix elements decay exponentially with the interatomic distance one obtains the convergence of results with increasing cyclic cluster. Of course, this convergence is slower the more diffuse are the AOs in the basis. From band-structure calculations it is known that for BNhex in the one-layer model the top of the valence band and the bottom of the conduction band are at the point P of the BZ reproduced in the cyclic cluster considered. We note that the symmetry connection of crystal and cyclic-cluster one-electron states is defined only by the supercell choice and therefore does not depend on the method used in the Hamiltonian matrix-elements calculations. The EHT method is noniterative so that the results of CCM application depend only on the overlap interaction radius. The more complicated situation takes place in iterative Mulliken–R¨ udenberg and self-consistent ZDO methods. In these methods for crystals, the atomic charges or the whole of the density matrix are calculated by summation over k points in the BZ and recalculated at each iteration step. The direct lattice summations have to be made in the surviving integrals calculation before the iteration procedure. However, when the nonlocal exchange is taken into account (as is done in the ZDO methods) the balance between direct lattice and BZ summations has to be ensured. This balance is automatically ensured in cyclic-cluster calculations as was shown in Chap. 4. Therefore, in iterative MR and self-consistent ZDO methods the increase of the cyclic cluster ensures increasing accuracy in the direct lattice and BZ summation simultaneously. This advantage of CCM is in many cases underestimated. In the MR method the matrix elements of a cyclic cluster are obtained from those for the crystal, taking k = 0 in (6.26). The modification of matrix elements due to PBC introduction has to be introduced in overlap and kinetic-energy integral calculation. The latter are expressed through overlap integrals so that there are no principal differences in the EHT and MR methods in the matrix-element modification, ensuring periodicity of the cluster chosen. The only difference is connected with the iterative

218

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

procedure of atomic charge and configuration self-consistency in the MR method, requiring the calculation of diagonal elements of the density matrix. In this calculation the summation over occupied MOs of the cyclic cluster is made that is equivalent to summation over those K-points of the original BZ that satisfy relation (6.60). The diagonal elements of the MR method Hamiltonian are corrected by the point-charge (Madelung) field of the surrounding crystal acting on cyclic-cluster atoms, see (6.26). In fact, the embedded cyclic cluster is considered. For ionic systems such a correction of CCM is necessary both in the ZDO and SINDO methods [301, 302]. In CCM the iterative calculations the atomic charges are used at any step of the iterative procedure to recalculate the Madelung energy for all atoms of a cyclic cluster and at the next step the atomic charges are recalculated with the matrix elements corrected by a recalculated Madelung energy. Within the k = 0 approximation the CNDO Hamiltonian for the supercell becomes   L′ −1   1  0n 00 ′ γM PN (k ) − ZN Fµµ (0) = Uµµ + ZM γM M + N L′ ′ n=0 N

+

′ L −1

n=0

Fµν (0) =





0 0n βM Sµµ − δ0n − ′ −1 L

1 2L′

k

′ L −1 

n=0

0n Pµµ (k′ ) exp(−ik′ Rn )γM M

(6.61)

k′



0 0n βM N Sµν

n=0

L −1 1  0n − Pµν (k′ ) exp(−ik′ Rn )γM N 2L′ n=0 ′

(6.62)

k

where L′ is the number of supercells in the main region of a crystal and k′ -summation is made over the reduced BZ. A calculation performed solely at the Γ (k′ = 0) point of the supercell BZ would become entirely equivalent to special K-points (6.59) calculation if all the direct lattice summations were be made over the whole crystal. However, in CCM the interaction range depends on the cyclic-cluster size. To determine the k′ = 0 Fock matrix elements we need the full k′ dependence of the supercell density matrices Pµν (k′ ), see (6.61) and (6.62). Meanwhile, each iteration in a cyclic-cluster calculation only provides the eigenvector coefficients Ciµ (0) at k′ = 0, and hence only Pµν (0). Therefore, it is necessary to relate over the fully k′ -dependent density the′ reduced BZ integrals ′ matrices, namely PN (k ) and Pµν (k ) exp(−ik′ Rn ) to PN (0) and Pµν (0), rek′

k′

spectively [280]. For sufficiently large supercells all the values of k′ in the reduced BZ will lie near k′ = 0, so that it should be valid to ignore the effect of the phase factor and use the fact that the reduced BZ is spanned by L k-points to obtain 1  Pµν exp(−ik′ Rn ) → Pµν (0) L′ ′

(6.63)

k

Simple substitution of (6.63) into (6.61) and (6.62) would introduce divergent lattice 0n 0n sums of γM N integrals. Therefore, a distance-dependent modulating function ω(RM N ) was introduced [280] such that 1  0n Pµν (k′ ) exp(−ik′ Rn ) = ω(RM N )Pµν (0) L′ ′ k

(6.64)

6.3 Zero-differential overlap Approximation in Cyclic-cluster Model

219

(orbital µ on atom M is in cell 0 and orbital ν is on atom N in cell n). To find an approximate form of this modulating function a tight-binding description of a one-dimensional chain of atoms possessing one atom per primitive unit cell 0n and two orbitals per atom was studied [280]. The sinc2 ( πa RM N ) function found was simply extended to the three-dimensional cubic lattice case. Unfortunately, the form of this modulating function depends on the direct lattice of supercells and its extension to noncubic lattices is nontrivial. 0n In some cases the modulating function ω(RM N ) is taken as the simple step function  0n 1 if RM 0n N ≤ Rc (6.65) ω(RM N) = 0n 0 if RM N > Rc where the exchange cutoff radius Rc in (6.65) was a variable parameter or taken intuitively to be about a half of the cyclic cluster smallest translation vector length. As was shown in Sect. 4.3.3, the modulating (weighting) function explicit form (4.157) can be found in the interpolation procedure for constructing an approximate density matrix. The modulating step function suggested in (4.157) is easily applied to any type of lattice and was incorporated into both HF and CNDO cyclic-cluster calculations [70]. It was shown that the exchange interaction range should be chosen such that the corresponding sphere of radius Rc differs only slightly from the Wigner–Seitz supercell, corresponding to the cyclic cluster. This gave a theoretical background to the former intuitive choice (6.65) of the exchange interaction radius Rc . Cyclic-cluster CNDO Hamiltonian matrix elements may be written in the following form ′

Fµµ (0) = Uµµ +

00 ZM γM M

+

−1   L N

+

′ L −1

Fµν (0) =

n=0

0n (Pµµ (0) − ZN ) γM N



0 0n βM Sµµ

n=0

′ −1 L

n=0 ν∈N

L −1 1  0n 0n Pµµ (0)ω(RM − N )γM M 2 n=0

(6.66)



0 0n βM N Sµν

L −1 1  0n 0n − Pµν (0)ω(RM N )γM N 2 n=0

(6.67)

Comparing CCM Hamiltonian matrix elements (6.66) and (6.67) with those for a free molecule, Equations (6.33)–(6.35), one can see the differences. Equations (6.66) and (6.67) formally include summation over the main region of a crystal composed of the equivalent supercells. The lattice sums containing overlap integrals are truncated for a cyclic cluster in the CNDO method in the same way as is done in the EHT and MR methods. For the Coulomb interaction sums (third item in (6.66)) the Ewald method can be used to calculate the Madelung energy of a crystal surrounding the cyclic 0n cluster. The modulating function ω(RM N ) ensures the truncation of the diverging lattice sums appearing in the nonlocal exchange interactions (last items in (6.66) and (6.67)). CCM has been implemented in various ZDO methods: CNDO-INDO [276,277,280, 303–310], MINDO/3 [311], MNDO [271], NDDO(AM1, PM3), [312]. All the semiempirical methods stand or fall by their parameter set. The ZDO methods parameter

220

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

sets suitable for molecular calculations will not necessarily be suitable for the solid state. The parametrization scheme may be dependent on the chemical bonding in the crystal (different sets of parameters are suitable for ionic and covalent crystals), introducing additional difficulties. The main ZDO parameters for each orbital type are: the orbital exponent ζ entering the radial part of Slater-type AOs, the diagonal matrix elements Uµµ of the interaction of an electron occupying AO χµ with its own core expressed through elecM tronegativity Eneg = −1/2(Iµ + Aµ ) of this AO, the resonance integrals β depending only on the atom type. Additional parameters appear in the matrix elements of an interaction of an electron on the µth AO belonging to atom M with the core of another atom N , [313]:     1 1 VµN = ZN + (µµ|νν) − exp(−αN RM N ) (6.68) RM N RM N where RM N is the distance between M and N , ZN is the core charge of atom N , αN is an adjustable parameter characterizing the nonpoint nature of the atom N core. AOs χµ and χν belong to atoms M and N , respectively, the two-center Coulomb integral (µµ|νν) may be calculated with STOs or considered as γM N depending only on atoms types. The detailed discussion of parameter choice in CCM ZDO methods can be found for different types of crystalline solids: ionic crystals of alkali halides [300, 304, 314, 315] and simple oxides MgO,CaO [313], covalent and partly covalent semiconductors [276, 293, 310, 312, 316, 317], crystalline oxides with different structure [318], including high-Tc superconductors [318]. In the next section we discuss MSINDO semiempirical and HF nonempirical methods implementation of CCM for the calculation of bulk properties of rutile crystal. The efficiency of the MSINDO method will be demonstrated that gives reasonable agreement with the results of HF calculations and at the same time is essentially simpler in practical realization. 6.3.3 Implementation of the Cyclic-cluster Model in MSINDO and Hartree–Fock LCAO Methods The cyclic-cluster approach was implemented in the semiempirical SCF-MO method SINDO1 [319] and its recent modification MSINDO [301] and has been successfully applied for bulk and surface properties of oxides [302, 320]. The underlying strategy of the CCM implementation in MSINDO was to start from a molecular system and to introduce PBC in such a way that both local point symmetry and stoichiometry of the system are conserved. Within this approach the local invironment of each cyclic-cluster atom is replaced by that of a fictitious cyclic arrangement. A cluster of n atoms in one dimension is treated in the same way as a cyclic arrangement of the same number of atoms on a ring. Two- and three-dimensional systems are treated as arrangements on a torus and a hypertorus, respectively. All interactions for each atom M are then calculated within an interaction region around that atom, corresponding to its Wigner–Seitz cell (WSC). For two-center integrals (overlap, nuclear attraction, electron repulsion) between the M atom of the interaction region and atoms at the boundaries of its WSC [301] weighting factors are used to retain the proper symmetry. In this approach, the cyclicity and summation

6.3 Zero-differential overlap Approximation in Cyclic-cluster Model

221

regions are the same and not dependent on integral thresholds as for periodic LCAO methods [23]. Long-range Coulomb interactions have been taken into account by additional finite point charge fields outside the cyclic cluster [302]. A scheme for the calculation of analytical gradients has been developed for structure optimization of cyclic clusters [301]. In MSINDO only two-center two-electron integrals of the form (µM µM |νN νN ) are taken into account. Atomic orbitals χµ and χν are taken as s-type functions. Therefore, these integrals have no angular dependence and an averaging over integrals between different atoms on the same radius around the considered atom causes no problems. In MSINDO also two-center one-electron integrals are replaced by empirical formulas that do not contain any angular dependence, so that the two-center elements of the Fock matrix have the following form [249]: Fµν = Hµν + Pµν (µµ|νν) = ∆Hµν + Lµν + Pµν (µµ|νν)

(µ ∈ M, ν ∈ N )

(6.69)

with the two parametrized empirical functions 1 (KM + KN ) Sµν (fM hµµ + fN hνν ) , fM = 1 − exp(−αM RM N ) 4

Sµν (1 − Sµν ) 1 (6.70) = − ζµ2 + ζν2 2 1 + 1/2(ζµ + ζν )RM N

∆Hµν = Lµν

where ζµ , ζν are orbital exponents, KM , KN , and αM are empirical parameters optimized for a given set of reference molecules. In CCM calculations these matrix elements remain unchanged when atom N is in the inner part of the interaction region of atom M . In the case that N is on the border of the interaction region around M , the contributions from all nM N ′ atoms N ′ that are translationally equivalent to N and appear at the same radius are summed up into one matrix element with weighting coefficient [301]: Hµν =

equiv  N′

Gµν =

ωM N ′ Hµν ′ , ν ′ ∈ N

equiv 

ωM N ′ (µµ|ν ′ ν ′ )

(6.71)

N′

The construction of the Fock matrix and the SCF procedure to obtain a converged density matrix of the cyclic system are essentially identical to the molecular case. The only extension is the inclusion of an external point charge field that is added to the diagonal terms of F. As the calculations for the cyclic clusters are performed in real space, no Bloch functions are used as the basis set. This strategy makes a direct comparison between calculations for free and cyclic clusters possible. Because of the quadratic increase of the number of two-center integrals with the number of cluster atoms a special technique can be used to reduce the computational effort [321]. This technique is based on the sorting of the interatomic distances because equal atom pairs with the same distance have identical integrals in a local coordinate system. With this technique the number of calculated integrals can be decreased by a factor of

222

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

1000 or more. All features available in the molecular version of MSINDO, for example, configuration interaction, geometry optimization, or vibration analysis, can also be used for the cyclic clusters. This also includes the treatment of charged systems that are generally difficult to treat with periodic methods. Interactions of an ion M with ions N ′′ at a distance beyond the borders of the WSC will decrease rapidly with increasing interatomic distance in covalent systems. This does not hold for ionic systems, since Coulomb-type interactions fall off slowly. If the ions N ′′ are approximated as point charges with a net charge q, the Madelung potential due to these charges, which can be calculated by the Ewald summation technique as shown in [302], will modify the Fock matrix and the total energy in the following way FMAD (P) = F(P) + VMAD (P) (6.72)

1 (6.73) Etot = Tr P(H + FMAD ) + VN N + E MAD 2

Here F denotes the Fock matrix, FMAD the Madelung-corrected Fock matrix, P the density matrix, H is the core Hamiltonian matrix, Etot the total energy of the system and VN N the nuclear repulsion term. The terms VMAD(P) and E MAD denote the Madelung correction of the Fock matrix and of the nuclear repulsion, respectively. Due to the application of the ZDO approximation in MSINDO, VMAD (P) is a diagonal matrix,  qN ′′ MAD ¯ ωM N ′′ ¯ (6.74) VµM µM = ΦmD (dM ) − ¯ | d M − dN ′′ | N ′′ # "  ′′ q 1 ∗ N MAD (6.75) ZM ΦmD (d¯M ) − ωM N ′′ ¯ E = 2 |dM − d¯N ′′ | M N ′′

∗ is the effective nuclear charge of atom M . The corrections are implemented in ZM a self-consistent manner, since the net charges qN ′′ are calculated from the cluster density matrix P using a L¨ owdin population analysis. The electrostatic interactions of the ion M with the ions in its WSC must be subtracted from the Madelung potential ΦmD , because these interactions are already considered in the unmodified Fock matrix F (P ). To avoid double counting of interactions the factor 1/2 is introduced in (6.75). It has to be mentioned that the simple procedure used in CCM MSINDO of an averaging of two-center integrals between the central atom of the interaction region and atoms at the boundaries of its WSC is not possible for ab-initio Hartree–Fock methods due to the presence of three- and four-center integrals. The implementation of the CCM in the HF LCAO method is based on the use of the idempotency property of a one-electron density matrix (DM) of crystalline systems [100]. The underlying strategy in this case was to start from a periodic system and to make small modifications in the corresponding LCAO computer codes. It has to be mentioned that the CCM realization in PW basis seems to be impossible as the interaction region in this case can not be defined. The idempotency of the DM is a consequence of the orthonormality of the oneelectron Bloch functions that are the basis of the crystalline orbitals. In the CCM the DM has to be idempotent when a one-determinant wavefunction is used and convergence with cluster size is achieved. The infinite DM of a solid formally does not have this property, but the infinite solid itself is modeled by a very large cyclic cluster

6.3 Zero-differential overlap Approximation in Cyclic-cluster Model

223

describing the main region of the crystal when Born–von Karman PBC are introduced to ensure macroscopic periodicity of a crystal model. In Sect. 4.3.3 the CCM of the infinite crystal was deduced from the study of the approximate DM (4.164). The supercell corresponding to the cyclic cluster under consideration was taken as the Wigner–Seitz supercell; to have the proper point symmetry the weighting function (4.165) was introduced. Defining an atomic covalence as the sum of Wiberg indices for an atom in the cyclic cluster or all the other atoms of a crystal the relation (4.140) was obtained. This relation means that the atomic covalence in a cyclic cluster may (2) (1) be calculated as a lattice sum CM of Wiberg indices and as an expression CM , containing only those DM elements that refer to atom M :  (2)    ¯ N )WM N (R ¯n) + WM M (0) = NeC CM = ωN (R M M =N

M

 M

(1)

CM =

 M



⎝2



µ∈M

M



L Pµµ (0) − WM M (0)⎠ = Ne

(6.76)

where NeC , Ne is the number of electrons in the primitive unit cell. For each cyclic ¯ N ) of neighbor atoms in spheres cluster there are certain weighting coefficients ωN (R around atom M . For the inner atoms of a cyclic cluster ωN = 1, while for border atoms ωN < 1. Relation (6.76) provides a simple way to check the idempotency property of the DM. Therefore, it can be used to implement the CCM in HF LCAO calculations. This implementation requires simple modifications in the property part of the CRYSTAL program [23]. A L¨ owdin population analysis is introduced for self-consistent DM and the bond-order sums are calculated for atoms of the crystal. The lattice summation in (6.76) is made over the same part of the lattice that has been used in the integrals calculation for the self-consistent procedure (the lattice summation field is defined by the most severe tolerance used in the two-electron exchange integrals calculation). In order to receive results for a cyclic cluster, relation (6.76) is checked for different choices of tolerances in the integrals calculations and Q sets of wavevectors in the BZ, corresponding to those K- sets that satisfy (6.60). The implementation of a cyclic cluster for perfect crystals is realized in most cases by using the primitive unit cell and taking into account that the cyclicity field of the DM is defined by the choice of Q. The implementation of the CCM in HF LCAO calculations is demonstrated for the rutile structure. 14 The tetragonal rutile structure belongs to space group P 42 /mnm(D4h ) and contains two TiO2 units per cell. The two Ti atoms are located at the Wyckoff 2a sites (0, 0, 0) and (1/2, 1/2, 1/2) with D2h site symmetry, while the four O atoms are located at the 4f sites ±(u, u, 0) and ±(u + 1/2, 1/2 − u, 1/2) with site symmetry C2v (see Sect. 2.3.3). The primitive unit cell of rutile is illustrated in Fig. 6.2. Each Ti atom is surrounded by a slightly distorted octahedron of O atoms with two different Ti–O distances. In connection with the cyclic-cluster choice it is useful to label the atoms surrounding Ti(1) and O(3) in the primitive cell (000) by the translation vectors of the corresponding unit cells (see Fig. 6.2). From Fig. 6.2 it is seen that the inclusion of all nearest neighbors for a Ti atom requires at least a cyclic cluster with translation vectors a1 (0, 0, a), a2 (0, a, 0), 2a3 (0, 0, 2c). The smallest cyclic cluster

224

6 Semiempirical LCAO Methods for Molecules and Periodic Systems  

F         

 

 

D

 

D

 

 

 



 

Fig. 6.2. Labeling of atoms in the rutile bulk unit cell; selected atoms of neighboring unit cells are also given

that contains the nearest neighbors to an O atom is formed by translation vectors 2a1 (2a, 0, 0), 2a2 (0, 2a, 0), 2a3 (0, 0, 2c). For simple tetragonal lattices the symmetric supercells can be made in four different ways while maintaining tetragonal symmetry: 1. By simple extension of translation vectors (n1 a1 , n2 a2 , n3 a3 ). The corresponding transformation matrix is given in Table 6.1 at the bottom of the first column. 2. By rotation of vectors a1 and a2 by 45◦ in their plane and extension of the vector. The transformation matrix is given in the second column of Table 6.1. 3. By changing from a simple to a body-centered tetragonal lattice. This can be achieved in two different ways. The corresponding transformation matrices are given in columns 3 and 4 of Table 6.3. In Table 6.3 cyclic clusters representing the rutile bulk structure are given that are generated from the primitive bulk unit cell by applying the above-mentioned four types of LUC transformations. The cluster size was restricted to L = 24 (144 atoms). As it was noted in Sect. 6.3.2 CCM allows us to connect by symmetry the MOs of cyclic cluster with those COs of a whole crystal for which (6.60) is satisfied. The BZ for the simple tetragonal lattice was shown in Fig. 3.7. The K symmetry points and K-points in symmetry lines (in units of the basic translation vectors of the reciprocal simple tetragonal lattice) are the following (for lines of symmetry the parameter p < 1 has to be introduced). Symmetry points Γ (0, 0, 0), M ( 12 , 21 , 0), Z(0, 0, 12 ), A( 21 , 12 , 21 ), 2X(0, 12 , 0), 2R(0, 21 , 12 ); symmetry lines Γ − X = ∆(0, p, 0), Γ − M = Σ(p, p, 0), Γ − Z = Λ(0, 0, p), M − X = Y (p, 12 , 0), A − R = T (p, 12 , 12 ), Z − A = S(p, p, 21 ), M − A = V ( 12 , 12 , p), Z − R = U (0, p, 21 ), X − R = W (0, 12 , p), Γ − A = ε(p, p, p). In Table 6.3 are given K-point sets of the primitive cell BZ satisfying (6.60) and folding down on the k = 0 point of the reduced BZ. The interaction region in CCM may be defined by WSC around each atom of a cyclic cluster or by the number J of spheres of direct lattice translation vectors An with smallest nonzero length, also given in Table 6.3. To implement CCM into the HF LCAO calculations [100] the periodic crystallineorbital program CRYSTAL95 [322] was used with the modifications [97] allow the DM idempotency (6.76) to be checked. In rutile TiO2 calculations the AO bases, lattice parameters and effective core potentials were taken to be the same as those used in [323] to calculate the optimized lattice parameters. In the CRYSTAL code

2

1

2

3

4

1

2

2

2

2

1

4

9

Γ, M, Z, A, 2X, 2R

Γ, M, 2X, 2Λ, 2V, 2W (p = 13 )

2

Γ, M, 2X

Γ, M

J

C16.1

Γ, M, 2X, 10 Z, A, 2R, 2Λ, 2V, 4W (p = 41 )    n1 0 0      L = n21 n2 =  0 n1 0     0 0 n2 

C12.1

C8.1

C4.1

C2.1

cluster

Γ, M, 2X, 2V, 2Λ, 4W, 4Σ(p = 14 ), 8( 14 , 14 , 13 )

Γ, M, 2X, 4Σ(p = 41 ) Γ, M, Z, A, 2X, 2R, 4Σ, 4S(p = 14 )

Γ, M, A, Z

Γ, Z

   n1 −n1 0      L = 2n21 n2 =  n1 n1 0     0 0 n2 

C24.2

C16.2

C8.2

C4.2

C2.2

cluster

CLa .2 SP-set

9

4

1

4

1

J

Γ, M, 2X, 4S(p = 14 ) Γ, M, 2X, Z, A, 2R, 8ε(p = 14 ) Γ, M, 2X, 2V, 2Λ, 4W, 4S(p = 41 ), 8( 14 , 14 , 16 )

Γ, Z, 2V

Γ, A

19

15

4

5

3

J

   0 n1 n2      L = 2n21 n2 =  n1 0 n2     n1 n1 0 

C24.3

C16.3

C8.3

C4.3

C2.3

cluster

CLa .3 SP-set

Γ, M, 2R Γ, M, Z, A, 4W (p = 14 ) Γ, M, 2X, 4Σ, 4U, 4T (p = 14 )

4

8

4

J

   −n1 n1 n2      L = 4n21 n2 =  n1 −n1 n2     n1 n1 −n2 

C16.4

C8.4

C4.4

cluster

CLa .4 SP-set

L is the number of primitive unit cells in the large unit cell defining the cyclic cluster. The number m in CL.m defines the choice of the corresponding transformation matrix given at the bottom of each column.

1

1

a

n2

n1

CLa .1 SP-set

Table 6.3. Cyclic clusters used for the representation of the rutile bulk; special point (SP)-set and its accuracy J

6.3 Zero-differential overlap Approximation in Cyclic-cluster Model 225

226

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

[23] the lattice sums of the integrals are truncated when the integrals values are smaller than 10−ti . The tolerances ti (i = 1 − 5) define the accuracy of the latticesums calculation. The band-structure calculations using the primitive unit cell of the rutile, the tolerances t1 = t2 = t3 = t4 = 6, t5 = 12 (the latter is used for exchange interactions) and shrinking factor IS=6 (216 k-points of 6 × 6 × 6 Monkhorst–Pack special points in the BZ) ensure the converged results for the total energy per primitive cell, top of the valence band and L¨ owdin charge on the Ti–atom (–69.7758 a.u., –0.3028 a.u and q=1.73, respectively). The cyclic-cluster calculations were performed using the SUPERCELL option of CRYSTAL95 and setting the shrinking factors IS to unity (corresponding to the k = 0 point in the BZ), defining the DM cyclicity region as the cyclic-cluster region itself. For the calculation of the total number of electrons per primitive cell (6.76) can to be used. For each cyclic cluster there are certain weighting coefficients of neighbor atoms in spheres i around Ti(ωTi (i)) and O(ωO (i)). At the same time the above-mentioned tolerance t5 defines the interaction radius for the exchange-integral truncation. For the given structural parameters and basis sets this radius is 8.16 ˚ A around a Ti atom and 7.84 ˚ A around an O atom, respectively (for rutile TiO2 with the optimized structures parameters a=4.555 ˚ A, c=2.998 ˚ A, u=0.306). The total number of electrons per unit cell Ne within the interaction radius calculated by summing bond orders over spheres i, containing a total number N (i) of atoms as given in the second line of Table 6.4. An analysis of Table 6.4 allows a cyclic cluster of relatively small size to be chosen in such a way that it still reproduces bulk properties with reasonable accuracy. For the small-size clusters (L = 4, 8) the imbalance of the cyclicity region and the interaction radius causes a huge difference between NeC and Nes as the sum of bond orders inside the interaction radius includes the neighboring cyclic clusters around the central cyclic cluster. The PBCs force atoms outside the central cyclic cluster to be equivalent to the corresponding atoms inside the cluster. At the same time the summation of bond orders inside a cyclicity region gives NeC values that are largely model-size independent, as the DM is calculated for the cyclic cluster under consideration. From Table 6.4 one concludes also that even for the same size L of a cyclic cluster the difference of the calculated properties Etot , εtop , and atomic charges q strongly depends on the “compactness” of a cluster. The compactness is defined by the number of spheres i of neighboring atoms with ω(i) = 1 inside the cyclic cluster. This property of cyclic clusters is important as, for example, the more compact cluster C4.3 gives results closer to the band calculation limit than the larger but less compact cluster C8.2. In order to construct more compact clusters, the anisotropy of the rutile structure (a ≈ 1.5c) has to be taken into account. Table 6.5 shows the effect of integral thresholds on the calculated properties of cyclic clusters. For the cyclic cluster C12.1 the calculated properties are close to those for C16.3, but the difference Nes −NeC is much larger, 3.2, i.e. the DM is nonidempotent. It is well known that small changes of only the most severe integral threshold do not essentially affect the results [324]. Therefore, its decrease may restore the DM idempotency while the calculated properties are only slightly changed. It is demonstrated in Table 6.5 that by using t5 = 9 instead of 12, the difference Nes − NeC decreases drastically to 0.10 for the same cluster, C12.1. For C16.1 the influence of t5 is also small. For a

9 0.0014 –0.0001 63.77

1 1 1 12 0 1 1 0 0 1 2 1 1 1 1 12 12 21 12 21 0 1 1 1 1 1 1 12 12 1 1 0 1 1 1 1 1 12 1 1 1 12 21 2 1 2

0

111111 111111 111111

111111 111111

1.69 1.97 1.69 1.72

1.97 1.60 1.60 1.68

1 1 1 1 1 1 1 1 1 1 1.73 1 1 1 1 1 1 1 1 1 1 1.73 1 1 1 1 1 1 1 1 1 1 1.73

1 1 1 1 1 1 1 1 1 1 1.73 1 1 1 1 1 1 1 1 1 1 1.73

1.73 1.69 1.73 1.69

1 1 1 1 1 1 1 1 1 1 1.73

111111 1111111111 1 1 12 1 1 12 1 1 1 1 12 1 1 12 12 1 111111 1111111111 1 1 12 1 1 12 1 1 1 1 12 1 1 12 12 1

111111

1 1 1 1 1 12 1 1 1 1 12 1 1 12 12 1 1 1 0 1 12 0 12 1 1 12 0 12 12 0 0 1 2 1 1 12 1 1 12 1 1 1 1 12 1 1 12 12 1 111111 1111111111

1 2 1 2 1 2 1 2

Band calculations (the shrinking factors are 2, 3, 4, 6 for CL8.1, CL27.1, CL64.1, and CL216.1, respectively)

66.93 63.80 63.79

CL27.1∗ 9 0.0008 0.0005 63.79 CL64.1∗ 18 0.0002 –0.0002 63.80 CL216.1∗ 33 0.0000 0.0000 63.79



66.94 63.80

63.79 67.04 63.76 108.14 63.83 63.86 63.75 108.15

9 0.0014 –0.0001 63.78 19 0.0005 –0.0006 63.80

–0.0003 –0.0125 –0.0002 –0.0125

CL24.2 CL24.3

0.0010 –0.0178 0.0018 –0.0178

10 4 15 4

70.17

63.77 111.32 63.92 241.76 63.74 108.95 63.81 74.66

245.80 12 1 0 1 199.57 1 1 12 12 185.90 1 1 1 12 248.79 1 1 12 1

CL16.1 CL16.2 CL16.3 CL16.4

–0.0127 –0.2854 –0.0124 –0.0040

63.91 63.85 63.89 63.73

CL12.1

–0.0167 –4.4048 –0.0183 –0.0022

–0.2856 –0.0136 –0.0134 –0.0170

4 1 4 8

–4.4041 –0.0302 –0.0138 –0.0248

CL8.1∗ CL8.2 CL8.3 CL8.4

NeC

1 4 5 4

∆ǫ

CL4.1 CL4.2 CL4.3 CL4.4

∆E

J

Cluster

Spheres i 1 2 3 4 5 6 1 2 3 4 5 6 7 8 9 10 N (i) 422484 2118222221 NeS ωTi (i) qTi ωO (i)

Table 6.4. Results of HF LCAO calculations of cyclic clusters for bulk rutile. Quality J, the difference of the total energy ∆E and the energy of the valence band top ∆ǫ (a.u.) with respect to the largest cluster C216.1, total number of electrons per unit cell calculated with (6.76) within the corresponding cyclic cluster (NeC ) and within the interaction radius defined by the integral thresholds (NeS ), weighting coefficients owdin charge qTi on Ti of neighboring atoms in spheres i around Ti (ωTi (i)) and O (ωO (i)), total number of atoms N (i) in sphere i, L¨

6.3 Zero-differential overlap Approximation in Cyclic-cluster Model 227

228

6 Semiempirical LCAO Methods for Molecules and Periodic Systems

Table 6.5. Effect of integral thresholds on calculated properties of cyclic clusters CL12.1 and CL16.3; total energy E and top of valence band ǫ (a.u.), L¨ owdin charge qTi of Ti, total number of electrons per unit cell calculated using (6.76) within the corresponding cyclic cluster (NeC ) and within the interaction radius defined by the integral thresholds (NeS ) Cluster

Integral thresholds

CL12.1

6 6 6 6 6

CL16.3

6 6 6 6

qTi NeC

NeS

E

ǫ

12 9 9a 8 8a

–69.7744 –69.7747 –69.7760 –69.7746 –69.7758

–0.3029 –0.3032 –0.3029 –0.3034 –0.3028

1.73 1.73 1.73 1.73 1.73

63.77 63.81 63.74 63.75 63.72

70.17 64.01 63.75 63.94 63.73

12 12a 13 13a

–69.7740 –69.7758 –69.7740 –69.7758

–0.3030 –0.3029 –0.3030 –0.3029

1.73 1.73 1.73 1.73

63.83 63.83 63.83 63.79

63.86 63.83 64.05 63.79

band calculationb 6 12

–69.7758 –0.3028 1.73 63.79 63.79

a b

increased by a factor of 8 with shrinking factors s1 = s2 = s3 = 2 primitive unit cell with shrinking factors s1 = s2 = s3 = 6

cyclic cluster that has been chosen properly, an increase of the cyclicity region has to give only small changes in the calculated results. Table 6.6. MSINDO CCM results for bulk rutile; total energy per unit cell Etot (a.u.), binding energy per unit EB (kJ/mol), HOMO energy ǫtop (a.u.), atomic L¨ owdin charge on Ti qTi . Cluster

Etot

EB

ǫtop

qTi

CL8.1 CL12.1 CL24.2 CL32.2

−70.2164 −70.0959 −70.3774 −70.3428

1880 1722 2092 2046

−0.2947 −0.2910 −0.2898 −0.2885

1.74 1.77 1.77 1.77

In CCM calculations of defective crystals such an increase of the cyclicity region allows investigation of the convergence of the results with cluster size. As is seen from Table 6.4, the k-sets accuracy J is important to reproduce the total energy. The cyclic-cluster increase without change of J (clusters C4.1 and C8.2 with J = 1, clusters C8.1, C16.1 and C16.4 with J = 4) gives only small changes in total energy. The cyclic clusters C12.1 and C16.3 generate highly accurate SP-sets (J = 9 and J = 15, respectively) and therefore the corresponding total energies are close to that of the infinite crystal. The same applies to the one-electron energy at the top of the valence band.

6.3 Zero-differential overlap Approximation in Cyclic-cluster Model

229

The idempotency of the DM in MSINDO cyclic-cluster calculations is guaranteed for all cases as the periodic boundary conditions were introduced into the molecular code. This was tested in [100] for the cyclic cluster C12.1 in two ways: (1) (2) 1. by calculating the difference CM − CM obtained with relation (6.76); 2 2. by directly calculating P − 2P and summing the absolute values of the differ2 ences over all matrix elements, ∆ = |Pµν − 2Pµν |. µν

By both ways of calculation it was clearly demonstrated that the MSINDO CCM (1) (2) density matrix is exactly idempotent. The differences of covalencies CM and CM −8 as well as ∆ are in the same order of magnitude as the SCF threshold, 10 . At the same time the symmetry of the crystalline system was correctly reproduced as checked by counting the degenerate one-electron levels in the oxygen 2s valence-band region and comparison with the results of a symmetry analysis. The symmetry of the cyclic cluster is different from the molecular cluster due to the presence of additional translation symmetry elements. Therefore, highly degenerate (8,4 degenerated) oneelectron levels appear that are not present in any molecular model of rutile. The calculated binding energies per unit cell EB , HOMO orbital energies εtop , and atomic L¨ owdin charges q for a number of cyclic clusters embedded in an infinite Madelung field, C8.1, C12.1, C24.2, and C32.2, are given in Table 6.6 [321]. The geometry of the four clusters has been optimized in terms of the three structural parameters c, RTiO(5) and RTiO(3) . At low temperatures, the experimental references are c = 2.954 ˚ A, RTiO(5) == 1.946 ˚ A, and RTiO(3) = 1.976 ˚ A. For the largest cyclic cluster, C32.3, the corresponding MSINDO values are 2.96 ˚ A, 1.90 ˚ A, and 1.91 ˚ A, which are in reasonable agreement with experiment. From Table 6.6 it can be seen that the convergence of Etot is much slower than for the periodic HF calculations, see Table 6.3. On the other hand, εtop and qTi show a similar convergence behavior. The MSINDO binding energies per TiO2 unit EB vary between 1722 and 2096 kJ/mol and are close to the experimental value of 1900 kJ/mol. The calculated HOMO orbital energies for MSINDO (Table 6.6) and HF (Table 6.5) are similar. The MSINDO εtop is only 0.6 eV less negative than the HF result. The density matrix idempotency relations described here may be easily extended to the unrestricted Hartree–Fock (UHF) method when the orbitals for α and β spins are treated independently. As it is seen from the HF calculations of bulk rutile structure the CCM technique produces a good representation of the perfect crystal, which is essential for pointdefect studies.

7 Kohn–Sham LCAO Method for Periodic Systems

7.1 Foundations of the Density-functional Theory 7.1.1 The Basic Formulation of the Density-functional Theory Density-functional theory has its conceptual roots in the Thomas–Fermi model of a uniform electron gas [325, 326] and the Slater local exchange approximation [327]. A formalistic proof for the correctness of the Thomas–Fermi model was provided by Hohenberg–Kohn theorems, [328]. DFT has been very popular for calculations in solidstate physics since the 1970s. In many cases DFT with the local-density approximation and plane waves as basis functions gives quite satisfactory results, for solid-state calculations, in comparison to experimental data at relatively low computational costs when compared to other ways of solving the quantum-mechanical many-body problem. It took a long time for quantum chemists to recognize the possible contribution of DFT. A possible explanation of this is that the molecule is a very different object to the solid as the electron density in a molecule is very far from uniform [329]. DFT was not considered accurate enough for calculations in molecular quantum chemistry until the 1990s, when the approximations used in the theory were greatly refined to better model the exchange and correlation interactions. DFT is now a leading method for electronic-structure calculations in both fields. In quantum chemistry of solids DFT LCAO calculations now have become popular especially with the use of so-called hybrid functionals including both HF and DFT exchange. Traditional quantum chemistry starts from the electronic Schr¨ odinger equation (SE) and attempts to solve it using increasingly more accurate approaches (Hartree– Fock and different post-Hartree–Fock methods, see Chapters 4 and 5). These approaches are based on the complicated many-electron wavefunction (and are therefore called wavefunction-based methods) and in these ab-initio methods no semiempirical parameters arise. Such an approach can be summarized by the following seSE

Ψ |...|Ψ

quence [330]: V (r) −−→ Ψ (r 1 , r 2 , . . . , r N ) −−−−−→ observables, i.e. one specifies the system by choosing potential V (r), plugs it into the Schr¨ odinger’s equation, solves that equation for the wavefunction Ψ (r 1 , r 2 , . . . , r N ), and then calculates observables by taking the expectation values of operators with this wavefunction. One among the observables that are calculated in this way is the one-electron density

232

7 Kohn–Sham LCAO Method for Periodic Systems

ρ(r) = N



d3 r 2



d3 r 3 . . .



d3 r N Ψ ∗ (r, r 2 , . . . , r N )Ψ (r, r 2 , . . . , r N )

(7.1)

In DFT, the density (7.1) becomes the key variable: DFT can be summarized by the sequence ρ(r) → Ψ (r 1 , r 2 , . . . , r N ) → V (r) i.e. knowledge of ρ(r) implies knowledge of the wavefunction and the potential, and hence of all other observables. This also represents the fact that ultimately the electron density and not a wavefunction is the observable. Although this sequence describes the conceptual structure of DFT, it does not really represent what is done in actual applications of it and does not make explicit the use of many-body wavefunctions. Some chemists until now consider DFT as a containing “ semiempirism”(not ab-initio) method but recognize that the small number of semiempirical parameters are used in DFT and these parameters are “universal to the whole chemistry” [329]. Two core elements of DFT are the Hohenberg–Kohn (HK) theorems [328,331] and the Kohn–Sham equations [332]. The former is mainly conceptual, but via the second the most common implementations of DFT have been done. Whereas the many-electron wavefunction is dependent on 3N variables, three spatial variables for each of the N electrons, the density is only a function of three variables and is a simpler quantity to deal with both conceptually and practically. The literature on DFT and its applications is large. Some representative examples are the following: books [333–337], separate chapters of monographs [8, 10, 102] and review articles [330, 338–340]. We give here basic formulation of DFT and the Kohn–Sham method in the spirit of a “bird’s-eye view of DFT ” [330], referring the reader for the mathematical details to the original papers. The original Hohenberg–Kohn (HK) theorems [328] held only for the ground state in the absence of a magnetic field, although they have since been generalized. The theorems can be extended to the time-dependent domain DFT (TDDFT), which can also be used to determine excited states [341]. Nevertheless, the inability of the DFT method to describe for molecular systems the spin and space degenerate states [342], as the diagonal element of the full density matrix is invariant with respect to all operations of the symmetry group, was proven. The first HK theorem demonstrates the existence of a one-to-one mapping between the ground-state electron density (7.1) and the ground-state wavefunction of a manyparticle system. The first Hohenberg–Kohn theorem is only an existence theorem, stating that the mapping exists, but does not provide any such exact mapping. It is in these mappings that approximations are made. Let us rewrite (4.7) for the manyelectron function of the system in the form ⎡ ⎤ N N    1 HΨ = [T + V + U ] Ψ = ⎣− ∆i + V (r i ) + U (r i , r j )⎦ Ψ = EΨ (7.2) 2 i=1 i=1 i rc val r

where Vval is the Coulomb and exchange potential due to the valence electrons, Z is the valence charge, and Al (E) is a constant (in space) function of energy E chosen to make the PO logarithmic derivative equal that of the true eigenfunction at several atomic eigenvalues. To a high degree of accuracy Al (E) may be linearized: Al (E) = Al +Bl E. A giant step forward in pseudopotentials was taken by Hamann et al. [472], who introduced norm conserving pseudopotentials (NCPP). NCCP for angular momentum l is chosen so that (1) the resulting atomic valence PO agrees with the corresponding all-electron (AE) AO for all r larger than some l-dependent cutoff (core) radius PS AE Rnl (r) (r) = Rnl

(8.17)

(2) the norm of the orbital is conserved, rc,l rc,l PS ae |Rnl (r)|2 dr = |Rnl (r)|2 dr 0

(8.18)

0

(3) The logarithmic derivatives of the true and pseudowavefunctions and their first energy derivatives agree for r > rc . Condition 1 automatically implies that the real and pseudovalence eigenvalues agree for a chosen “prototype” configuration, as the eigenvalue determines the asymptotic decay of the orbitals. Properties (2) and (3) are crucial for the pseudopotential to have optimum transferability among a variety of chemical environments [470]. The PP concept has been motivated by the inertness of the atomic core states in binding so that the ionic core of the atom provides a fixed potential in which the

302

8 Basis Sets and Pseudopotentials in Periodic LCAO Calculations

valence electrons are moving, independently of the system (atom, molecule or solid) that is considered. However, in polyatomic systems the valence states undergo obvious modifications compared to the atomic valence orbitals, even if the polyatomic core potential is given by a simple linear superposition of atomic core potentials. Most notably, the eigenenergies change when packing atoms together, which leads to bonding and antibonding states in molecules and to energy bands in solids. Thus, while PPs are designed to reproduce the valence AOs of some chosen atomic reference configuration (usually the ground state), it is not clear a priori that they will have the same property for all kinds of polyatomic systems and for other atomic configurations. Consequently, one has to make sure that the PP is transferable from its atomic reference state to the actually interesting environment. To check the transferability of PP one has to analyze the sensitivity of the agreement between atomic POs and AOs to the specific eigenenergy in the single-particle equation. One finds that the variation of the PS ae logarithmic derivative Rnl (r)/Rnl (r) with the single-particle energy is determined by the norm contained in the sphere between the origin and r. This is true in particular in the neighborhood of one of the actual atomic eigenvalues εnl , i.e. for a bound atomic eigenstate. Thus, as soon as normconservation is ensured, the POs exactly reproduce the energy dependence of the logarithmic derivative of the AOs for r > rc,l . Consequently, one expects the POs to react as the AOs when the valence states experience some energy shift in a polyatomic environment – provided the underlying PPs are normconserving. This argument supporting the transferability of PPs emphasizes the importance of normconservation in a very explicit way. In practice, it is, nevertheless, always recommended to check the transferability explicitly by examination of some suitable atomic excitation process and of the binding properties of simple molecular or crystalline systems [470]. In the next section we consider pseudopotentials used in modern periodic calculations. 8.2.2 Gaussian Form of Effective Core Potentials and Valence Basis Sets in Periodic LCAO Calculations The form of ECP used in the condensed-matter applications depends on the basis chosen – PW or LCAO. The numeric pseudopotentials in plane-wave calculations must be used with the density functional that was employed to generate them from a reference atomic state. This is a natural and logical choice whenever one of the planewave DFT codes is used. In PW calculations the valence functions are expanded in Fourier components, and the cost of the calculation scales as a power of the number of Fourier components needed in the calculation. One goal of PP is to create POs that are as smooth as possible and yet are accurate. In PW calculations maximizing smoothness is to minimize the range of Fourier space needed to describe the valence properties to a given accuracy [10]. Normconserving PPs achieve the goal of accuracy, usually at some sacrifice of smoothness. A different approach by Vanderbilt, known as “ultrasoft pseudopotentials”(US) [477] reaches the goal of accurate PW calculations by a transformation that re-expresses the problem in terms of a smooth function and an auxiliary function around each core that represents the rapidly varying part of the density. The generation code for Vanderbilt US pseudopotentials and their library can be found on site http://www.physics.rutgers.edu/ dhv/uspp. Ab-initio pseudopotentials for PW calculations of solids can be generated also by the fhiPP package [478], see also site http://www.fhi-berlin.mpg.de/th/fhimd/.

8.2 Nonrelativistic Effective Core Potentials and Valence Basis Sets

303

The numerical AO-based DFT code SIESTA [344] employs the same numeric pseudopotentials as plane-wave-based codes. An alternative approach is used in the Slater-orbital-based DFT code ADF [345], where so-called core functions are introduced. They represent the core-electron charge distribution, but are not variational degrees of freedom and serve as fixed core charges that generate the potential experienced by valence electrons [479]. In molecular quantum chemistry Gaussian-function-based computations, effective core potentials were originally derived from a reference calculation of a single atom within the nonrelativistic Hartree–Fock or relativistic Dirac–Fock (see Sect. 8.3) approximations, or from some method including electron correlations (CI, for instance). A review of these methods, as well as a general theory of ECPs is provided in [480,481]. In this section we discuss those effective core potentials and the corresponding valence basis sets that are used for Gaussian-function-based LCAO periodic computations implemented in the computer codes CRYSTAL [23] and GAUSSIAN [107]. The ECP general form is a sum of a Coulomb term, a local term and a semilocal term M

ZN  nk r Ck exp(−αk r2 ) + r k=1 # "M 3  l 2 nkl −2 Ckl exp(−αkl r ) Pˆl + r

VP S (r) = C + Vloc + Vsl = −

l=0

(8.19)

k=1

where ZN in a Coulomb term is the effective nuclear charge (total nuclear charge minus the number of electrons represented by ECP). The local term is a sum of products of polynomial and Gaussian radial functions. A semilocal term is a sum of products of polynomial radial functions, Gaussian radial functions and angularmomentum projection operators Pˆl . Therefore, to specify semilocal ECP one needs to include a collection of triplets (coefficient, power of r and exponent) for each term in each angular momentum of ECP. Hay and Wadt (HW) ECP [483] are of the general form (8.19). The procedure employed for generation of ECPs includes the following sequence of steps: 1) the “core” orbitals to be replaced and the remaining “valence” orbitals are defined. This step defines whether the small-core (the outermost core electrons are explicitly treated along with the valence electrons) or a large-core HW pseudopotential is generated; 2) the true numerical valence orbitals are obtained from self-consistent nonrelativistic Hartree–Fock (or relativistic Dirac–Fock) calculations for l = 0, 1, . . . , L, where L, in general, is one greater than the highest angular-momentum quantum number of any core orbital; 3) smooth, nodeless pseudo-orbitals (PO) are derived from the true Hartree–Fock (Dirac–Fock) orbitals in a manner so that PO behave as closely as possible to HF orbitals in the outer, valence region of the atom; 4) numerical effective core potentials VlP S are derived for each l by demanding that PO is a solution in the field of Vl with the same orbital energy ε as the Hartree–Fock (Dirac–Fock) orbital; 5) the numerical potentials are fit in analytic form with Gaussian functions, the total potential is represented as (8.19); 6) the numerical POs are also fit with Gaussian functions to obtain basis sets for molecular or periodic calculations. In the case of large-core ECP the primitive Gaussian bases (3s2p5d), (3s3p4d) and (3s3p3d) are tabulated for the first, second, and third transition series atoms, respectively. The

304

8 Basis Sets and Pseudopotentials in Periodic LCAO Calculations

figures in brackets mean the number of primitive of Gaussians in ns, np and (n − 1)d contracted AOs for n = 4, 5, 6. In the case of small-core ECP (n − 1)s, (n − 1)p contracted AOs are added and given as the linear combinations of primitive Gaussians. Hay-Wadt ECPs and valence-electron basis sets are also generated for main-group elements: large core – for Na to Xe, and Cs to Bi, small core – for K, Ca, Rb, Sr, Cs, Ba. The other known ECP and valence-electron basis sets were generated using the procedure, described for Hay–Wadt ECP generation. Durand–Barthelat large-core semilocal ECP [484] and corresponding valence-electron basis sets are generated for 3d-transition elements and the main-group elements Li to Kr. Compact one- and two-Gaussian expansions for the components of the effective potentials of atoms in the first two rows are presented by Stevens–Basch–Krauss [485]. Later, the list of ECP was extended to the third-, fourth- and fifth-row atoms [486] and includes relativistic ECP (RECP). The pseudo-orbital basis-set expansions for the first two rows of atoms consist of four Gaussian primitives using a common set of exponents for the s and p functions. Analytic SBK RECP are generated in order to reproduce POs and eigenvalues as closely as possible. The semilocal SBK ECP are given by  r2 Vl (r) = (8.20) Alk rnl,k exp(−Bl,k r2 ) k

The potentials and basis sets have been used to calculate the equilibrium structures and spectroscopic properties of several molecules. The results compare extremely favorably with the corresponding all-electron calculations. Stuttgart–Dresden (SD)ECP (formerly Stoll and Preuss ECP) are under constant development [487]. SD semilocal ECPs are written in the form "µ # 3 k   nkl −2 2 Vsl = r (8.21) Ckl exp(−αk r ) Pˆl l=0

k=1

Note the different convention for the factor rnkl −2 compared to (8.19). The database of SD ECP include relativistic ECP (RECP) generated by solving the relativistic Dirac–Fock equation for atoms. Improved SD pseudopotentials exist for many of the main-group elements, and the pseudopotentials are also available for 5d and other heavier elements. The most recent ECP parameters, optimized valence-electron basis sets, a list of references and guidelines for the choice of the pseudopotentials can be found at site http://www.theochem.uni-stuttgart.de. SD ECP can be used in periodic LCAO CRYSTAL and GAUSSIAN codes [23, 107]. Pseudopotentials are also used as embedding potentials when some special region of a covalently bonded solid or very large molecule is modeled by a modest-size cluster. The embedding pseudopotentials are considered in the next section. 8.2.3 Separable Embedding Potential As was noted in the preceding section the use of atomic pseudopotentials (or effective core potentials–ECPs) considerably simplifies the quantum-mechanical description of polyatomic systems (molecules and crystals) as the much more localized and chemically inert core electrons are simulated by ECP introduction. The choice of the norm

8.2 Nonrelativistic Effective Core Potentials and Valence Basis Sets

305

conserving and transferable ECPs ensures that the valence states are reproduced in the majority of cases as accurately as would be done in all-electron calculations. The second important application of pseudopotentials is connected with the socalled embedded-cluster model. This model is applied when one is interested in the electronic structure and properties of some small region of a large system such as a localized point defect in a solid, an adsorbed molecule on a solid surface or an active site in a very large biological molecule. In such a case one may model the region of interest by cutting a modest-sized but finite cluster out of the larger system and performing the calculation on it. For ionic solids the surrounding crystal can be modeled by the system of point charges. More difficult is the case when the environment is a covalently bonded system and the boundary between the cluster and environment passes through chemical bonds (covalent or partly covalent). In this case, the distant and nearest parts of an environment should be treated separately [488]. In the distant part, only the electrostatic potential representing the ionic component of an environment should be retained. The nearest part, corresponding to the “broken or dangling bonds”, needs special consideration. Each atom of the cluster boundary surface has unsaturated “dangling bonds” that cause spurious effects unless saturated in some way, usually by adding a hydrogen or pseudoatoms there [489]. This is better than leaving the dangling bond but clearly the termination is still imperfect in the sense that the bond to the attached atom is different from the bond to whatever atom is situated there in the real system [488]. Use of the embedding potentials (EP) to saturate dangling bonds of the cluster gives a cluster surface bond identical to that in the real large system. Recently introduced new separable potentials [488, 490] have several kinds of applications: 1) when some special region of a covalently bonded solid or very large molecule is modeled by a modest-sized cluster, each dangling bond at the cluster surface can be saturated in a way that exactly reproduces the bond in the complete system; 2) a similar approach can be used at the matching surface in an embedding scheme for calculations on the same type of systems; 3) application to atomic effective core potentials where the new potential operator avoids the possibility of “ghost” states that sometimes plague the widely used pseudopotentials. The important property of the introduced embedding potential is its separability. Let the nonlocal operator Vˆ (r) depend on the space variable r only and be represented by the integral operator Vˆ :  Vˆ ψ(r) = v(r, r ′ )ψ(r ′ )dr ′ (8.22)

with the kernel v(r, r ′ ). Expanding the kernel in both arguments with the complete orthonormal set of functions ϕi (r)(i = 1, 2, 3, . . .) the following representation of the potential can be obtained: ∞  Vˆ = |ϕi Vij ϕj | (8.23) i,j=1

where Vij is the infinite Hermitian matrix. If this matrix has a finite rank k, then only k of its eigenvalues are not equal to zero and the corresponding potential has the form k  Vˆsep = |χi µi χi | (8.24) i=1

306

8 Basis Sets and Pseudopotentials in Periodic LCAO Calculations

where χi (r) and µi are eigenfunctions and eigenvalues of the potential. Equation (8.24) defines the separable potential as a finite sum of single-state projectors (|χi χi |) with constant weights µi . A separable operator is an operator with a finite-dimensional functional space for its range. If one employs another orthonormal basis set ϕi (i = 1, 2, . . . , k) that spans the same functional space as the set χi (r)(i = 1, 2, . . . , k), the separable potential will have the nondiagonal form Vˆsep =

k 

i,j=1

|ϕi Vij ϕj |

(8.25)

but with finite sum over i, j. The difference between the separable potential and the potential of the general form is that the separable potential with a suitable choice of the basis could be transformed to the form (8.24) or (8.25) and the potential of the general form could not. As an example of separable potentials we mention the semilocal ECP, see (8.14), which have a form similar to (8.24), but where µi = Vi (r) are functions of the radial variable. These semilocal potentials are separable only in the angular variables (in which these potentials are nonlocal) as the separability is the property of nonlocal potentials. Separable nonlocal ECPs were extensively studied [474, 491–494]. The nonlocal separable potentials application is complicated by the problem of “ghost states” [495] i.e. extra bound states with levels, under the reference atomic eigenenergy. For semilocal ECPs, used in modern computer LCAO codes, this problem does not occur [493], for the embedding potential this problem has to be taken into account. ˆ 0 with eigenfunctions Ψ 0 and eigenvalues E 0 . Let us consider a Hamiltonian H i i Suppose we have an arbitrary set of orthonormal functions Ψp and an arbitrary set of real numbers Ep (p = 1, . . . , n). The aim is to develop another Hamiltonian ˆ sep = H ˆ 0 + Vˆsep H

(8.26)

ˆ sep are with separable potential Vˆsep so that n eigenfunctions and eigenvalues of H ˆ sep are equal to exactly Ψp and Ep , whereas all other eigenvalues Ei , i > n of H ˆ 0. eigenvalues of H ˆ sep will differ from eigenfunctions Ψ 0 of Of course, eigenfunctions Ψi , (i > n) of H i ˆ H0 because the former are orthogonal to Ψp , (p ≤ n) and the latter to Ψp0 . ˆ 0 into H ˆ sep could be done in two steps. The transformation H ˆ′ = U ˆH ˆ 0U ˆ † with a unitary operator In the first step the similarity transformation H ˆ U is made, which changes the eigenfunctions and leaves eigenvalues unchanged. To find the desired similarity transformation the following auxiliary problem is considered: a ˆ is found that transforms one set of orthonormal functions Ψ 0 into unitary operator U p another set of orthonormal functions Ψp : ˆ Ψ 0 = αp Ψp , U p

|αp | = 1,

p = 1, 2, . . . , n Ψp0

(8.27)

and Ψp , i.e. the dimension and there is no linear dependence among functions of functional space spanned by both sets of functions together is equal to 2n. The n ˆ is taken in the form U ˆ = Iˆ − R ˆ and R ˆ = |χp Tpq χq | is a separable operator U p,q=1

8.2 Nonrelativistic Effective Core Potentials and Valence Basis Sets

307

operator with the smallest possible dimension. Dropping the mathematical details ˆ given in [488], we write the explicit form of the operator R: ˆ= R

n 

p,q=1

( 3 |Ψp0 − αp Ψp Q−1 pq Ψq0 − αq Ψq |

(8.28)

where χp = Ψp0 − αp Ψp and Qpq = χp |Ψq0 = δpq − αp∗ Ψp |Ψq0 . The second step is the energy-shift transformation that changes specified eigenvalues only: ˆ sep = H ˆ′ + H

n  p=1

ˆ† + ˆH ˆ 0U =U

n  p=1

|Ψp (Ep − Ep0 ) Ψp | |Ψp (Ep − Ep0 ) Ψp |

(8.29)

Hence the potential Vˆsep can be written as ˆ sep − H ˆ0 = R ˆH ˆ 0R ˆ† − R ˆH ˆ0 − H ˆ 0R ˆ† + Vˆsep = H

n  p=1

|Ψp (Ep − Ep0 ) Ψp |

(8.30)

This potential is separable with dimension n, i.e. can be represented in the form Vˆsep =

3n  i,j

|fi Vij fj |

(8.31)

ˆH ˆ 0, H ˆ 0R ˆ † and R ˆH ˆ 0R ˆ†. where the expression for Vij can be found from expressions of R Although all equations were developed for arbitrary phase factors αp , in applications the real orbitals are used. For the sake of simplicity all the phase factors αp can be selected to be real, which makes the separable potential real as well. The signs of Ψp and Ψp0 are selected so that Ψp |Ψp0 ≥ 0 and all αp = −1 to make Vˆsep → 0 when G → G0 (G is a collection of ΨP , Ep , p = 1, 2, . . . , and G0 is a similar collection of Ψp0 , Ep0 ). The separable embedding potential (8.31) was applied to model the single chemical bond between the atom A of the cluster and the atom B of the cluster environment [488]. To simulate the effect of the cluster environment the atom B is replaced by a pseudoatom BP S at the same position as the actual atom B. The influence of the pseudoatom on the cluster is described by the potential that was assumed to have the following form: Vˆpsat = VˆH + Vˆsl + Vˆsep (8.32) Here, VˆH = −1/r is the hydrogen potential (in a.u.), responsible for the asymptotic behavior of the potential, Vˆsl is a semilocal potential  Vˆsl = Vl (r)|Ylm Ylm | (8.33) lm

ˆ 0, and Vˆsep is a case n = 1 separable potential (8.31) defined by the Hamiltonian H the energy E10 and the wavefunction Ψ10 of this Hamiltonian ground state, and by the

308

8 Basis Sets and Pseudopotentials in Periodic LCAO Calculations

ˆ 0 + Vˆsl . As H ˆ 0 was taken the energy E1 and the wavefunction Ψ1 of the operator H following ˆ 0 = − 1 ∆ + VˆH + Vˆsl H (8.34) 2 where Vˆsl is selected so as to reproduce the spectrum of the excited states of the atom B similarly to what is usually done in the calculation of the effective atomic core potentials. The wavefunction Ψ10 of the ground state of this Hamiltonian is a spherically symmetrical 1s function and it is not at all a directed hybrid orbital of the atom B that makes the single bond with the atom A. The separable potential ˆ 0 will change the ground-state wavefunction Ψ 0 for function Ψ1 Vˆsep being added to H 1 without changing the excited-state spectrum. Therefore, Ψ1 should be considered as a hybrid orbital of the atom B that is not known. However, the bond orbital ϕbond can be found. The new localization criterion was proposed to calculate the localized on bond A − B orbital ϕbond . This criterion is based on the maximization of the singleorbital contribution to the Wiberg index WAB defined by (4.137). The one-electron density matrix is calculated in the bases of AOs orthogonalized according to L¨ owdin procedure [225]. This bond orbital depends on Ψ1 implicitly and in [488] a method to calculate ϕbond and its effective energy Ebond was developed. The transferability of the separable embedding potential used seems very likely as the developed method of pseudopotential calculation results in the one-center potential (all the components of this potential, including Vˆsep , are centered on the atom B). This is demonstrated by use of the proposed separable potential (8.32) for the pseudosilicon atom that is to substitute the −SiH3 radical in X–SiH3 molecules (X was taken to be H, F, Cl, Br, and I). In all these molecules the hydrogen or halogen constitute the single chemical bond with Si. This bond is broken when the radical −SiH3 is removed and it could be saturated with the pseudosilicon atom so that the original five-atom molecule would be replaced by the diatomic molecule X–Sips . The angles between bonds in SiH3 X molecules vary only a little and the perfect tetrahedron angle was used for all molecules. The Si–H bond length in these molecules is also approximately equal to that in the SiH4 molecule, and silicon–halogen bond length varies considerably (the experimental values for silicon–halogen bond lengths were taken from diatomic Si–Hal molecules). The potential (8.32) was generated for the pseudosilicon atom to make the bond in the two-electron diatomic molecule H–Sips the same as the single chemical bond H–Si in the SiH4 molecule, this potential is centered at the Si atom. The potential-generation procedure consists of several stages. In the first stage the all-electron HF calculations on the SiH4 molecule were performed. The canonical HF orbitals, orbital energies, and the total density matrix were obtained in the GTO basis. In the second stage, the noncanonical HF orbital ϕbond localized on the selected Si-H bond was calculated using the Wiberg index for the localization criteria. The maximum localizing functional value obtained was 0.965, which is close enough to the maximum possible value 1 for the single covalent bond. In the third stage, the semilocal potential Vˆsl was generated so that the excited energy levels of the equation   1 1 0 0 0 (r) = Enl ψnlm (8.35) − ∆ − + Vˆsl ψnlm 2 r

8.2 Nonrelativistic Effective Core Potentials and Valence Basis Sets

309

0 coincide with unoccupied energy levels of the neutral silicon atom (E2s =E(Si)4s , 0 0 0 E2p = E(Si)4p , E3d = E(Si)3d and so on). No adjustment was done for the E1s energy level and it could be quite different from E(Si)3s . In the fourth and final stage, the function Ψ1 and the energy E1 were determined, and the pseudosilicon potential was obtained. The obtained potential of the pseudosilicon atom was used to calculate the diatomic molecules X−Sips (X = F, Cl, Br, I). The properties of the bond and the state of the halogen atom in the diatomic molecule could be compared with those in the real five-atom molecule. This comparison will show whether the same pseudosilicon potential could be used in all considered molecules, i.e., whether the generated pseudosilicon potential is transferable. The dipole moment of the bond was chosen for the bond property, and the atomic charge for the halogen property. For the diatomic molecule the dipole moment of the bond is the dipole moment of the molecule itself. However, for the five-atom molecule the dipole moment of the particular bond is not defined a priori. To make the comparison possible several assumptions were used that are natural enough. It was assumed that the dipole moment of every fiveatom molecule SiH3 X is the sum of the dipole moment of the X–Si bond and the dipole moment of the SiH3 radical. Next, it was assumed that the dipole moment of the (SiH3 ) radical is the same in all five molecules. The latter assumption can be considered as the “frozen bond” approximation, i.e. the neglect of the radical polarization when the X–Si bond is changing. Other details of the dipole-moment calculations can be found in [488]. To improve the agreement of the calculated dipole moments with the experimental data one d-orbital was added to the GTO 6-311G basis of silicon and halogen atoms. In Tables 8.4 and 8.5 the dipole moments and Mulliken atomic charges found in the all-electron HF calculations are compared with those obtained with the use of a pseudosilicon atom and a hydrogen atom to saturate the bond. The disagreement between experimental and HF data is explained by the neglect of the correlation effects, and in the case of a SiH3 I molecule the neglect of relativistic effects. The analysis of Table 8.4 allows us to conclude that the pseudosilicon potential generated for one molecule (SiH4 ) to represent the SiH3 radical could be employed in calculations of other molecules (SiH3 X, X = F, Cl, Br, I) with the same radical. From Table 8.5 it follows that the correlation between charges calculated with different methods is similar to that for the dipole moments. However, it should be remembered that atomic charges are not physically observable quantities and they strongly depend on their definition and on the basis employed in calculations. Approximations to the exact (in the Hartree–Fock approximation) separable embedding potential were introduced in [490] that enable one to incorporate this potential into existing molecular calculation packages. The test calculations on the (CH3 )2 O molecule were performed that showed good accuracy of the potential. So far, the formulation of pseudopotentials has been strictly nonrelativistic, so that the issue of heavy elements still remains to be addressed. In the next section we consider relativistic pseudopotentials.

310

8 Basis Sets and Pseudopotentials in Periodic LCAO Calculations Table 8.4. The dipole moments (a.u) [488]

SiH3 F SiH3 Cl SiH3 Br SiH3 I a

Theor.1a

Theor.2b

Theor.3c

Expt.

1.226 0.899 0.267 0.257

0.555 0.644 0.502 0.536

0.527 0.631 0.533 0.560

0.511 0.515 0.519

The bond is saturated with the hydrogen

b

The bond is saturated with the pseudosilicon

c

All-electron Hartree–Fock calculations

Table 8.5. The charge on atom A, A= H, F, Cl, Br, I, [488]

SiH4 SiH3 F SiH3 Cl SiH3 Br SiH3 I a

Theor.1a

Theor.2b

Theor.3c

0.000 –0.380 –0.278 –0.032 –0.097

–0.157 –0.523 –0.398 –0.035 –0.263

–0.149 –0.687 –0.416 –0.040 –0.352

The bond is saturated with the hydrogen

b

The bond is saturated with the pseudosilicon

c

All-electron Hartree–Fock calculations

8.3 Relativistic Effective Core Potentials and Valence Basis Sets 8.3.1 Relativistic Electronic Structure Theory: Dirac–Hartree–Fock and Dirac–Kohn–Sham Methods for Molecules Heavy-element systems are involved in many important chemical and physical phenomena. However, they still present difficulties to theoretical study, especially in the case of solids containing atoms of heavy elements (with the nuclear charge Z ≥ 50). In this short description of relativistic electronic-structure theory for molecular systems we follow [496] and add a more detailed explanation of the Dirac–Kohn–Sham (DKS) method. For a long time the relativistic effects underlying in heavy atoms had not been regarded as such an important effect for chemical properties because the relativistic effects appear primarily in the core atomic region. However, now the importance of the relativistic effects, which play essential and vital roles in the total natures of electronic structures for heavy-element molecular and periodic systems, is recognized [496]. To treat the relativistic effect theoretically, the Dirac Hamiltonian should be applied instead of the nonrelativistic Schr¨ odinger Hamiltonian. The Dirac one-particle Hamiltonian has the form ˆ D = cα · p ˆ + (β − 1)c2 + V (r) h

(8.36)

8.3 Relativistic Effective Core Potentials and Valence Basis Sets

311

ˆ = −i∇ is the where c is the speed of light, V (r) is the external potential, and p momentum operator. The 4 × 4 Dirac matrices α and β in (8.36) are given by     I 0 02 σt (8.37) , t = (x, y, z), β = 2 2 αt = 02 −I2 σt 02 with a 2 × 2 Pauli spin matrix, σt     01 0 −i σx = , σy = , 10 i 0

σz =



 1 0 0 −1

(8.38)

Here, 02 , I2 are zero and identity 2 × 2 matrices. The free-particle Dirac Hamiltonian provides a physical structure that the eigenvalue spectrum {Ek } consists of two parts. The states of the higher-energy spectrum, where Ek ≥ +mc2 are called the positive-energy states, and comprises states corresponding to those found in the nonrelativistic theory. The second branch of the eigenvalue spectrum consists of states with energy less than −mc2 and in a secondquantized theory they can be interpreted as states of positrons, and are called the negative-energy states. To apply the Dirac theory to the many-particle system the one-particle Dirac operator (8.36) is augmented by the Coulomb or Coulomb–Breit operator as the two-particle term, gij , to produce the Dirac–Coulomb (DC) or Dirac–Coulomb–Breit (DCB) Hamiltonian derived from the quantum electrodynamics [496–498]:  c = r1ij , r ij = r i − r j , rij = |r ij | gij gij = (8.39) CB gij where CB gij =

1 1 − rij 2



(αi αj ) (αi r ij )(αj r ij ) + 3 rij rij



(8.40)

By applying the independent particle approximation to many-particle relativistic DC or DCB Hamiltonians, one obtains the four-component Dirac–Hartree–Fock (DHF) method with large- and small-component spinors treated explicitly. The DHF wavefunction Ψ is given as the Slater determinant with Ne one-particle spinors (ψi (r), i = 1, . . . , Ne ), where Ne represents the number of electrons. The oneparticle spinor ψi (r) is the four-component vector whose components are the scalar wavefunctions, ⎛ L⎞ ψ1i  2L  ⎜ψ L ⎟ ψi 2i ⎟ ψi = =⎜ (8.41) S⎠ ⎝ψ3i ψi2S S ψ4i The two-component electron functions ψi2L and ψi2S are called the large-component and small-component spinors, respectively, which are expanded in the basis spinors χL and χS . The matrix DHF-LCAO equation for closed-shell systems is given as, FC = SCE

(8.42)

312

8 Basis Sets and Pseudopotentials in Periodic LCAO Calculations

where C is a matrix of molecular spinor coefficients, E is a diagonal spinor(orbital) energy matrix, S is an overlap matrix,   L L 0 χµ |χν Sµν = (8.43) 0 χSµ |χSν and the Fock matrix F is given by   LL LL LS cΠLS Vµν + JLL µν − Kµν µν − Kµν Fµν = 2 SS SS SS SL + JSS Vµν cΠSL µν − Kµν − 2c Sµν µν − Kµν

(8.44)

¯ X XX XX XX ¯ ¯ The matrices ΠX µν , Vµν , Jµν , and Kµν (X, Y = L or S, L = S and S = L) are the kinetic-energy integral, the nuclear-attraction integral and the Coulomb integral, respectively, defined by, ¯ ¯ X X X ΠX (8.45) µν = χµ |σp|χν ¯

JXX µν

¯

XX nuc X Vµν = χX |χν µ |V  

2X 2Y 2Y = PYλσY χ2X µ χν |χλ χσ

(8.46) (8.47)

Y =L,S λσ

and

KXY µν =

 λσ

2X 2X 2Y 2Y

PXY χµ χν |χλ χσ λσ

(8.48)

The density matrix PXY λσ is calculated as, PXY λσ =

occ

X Y∗ Ciλ Ciσ

(8.49)

i

where the negative-energy states are ignored. Even applying the four-component single-configuration (SCF) approximation, Dirac–Hartree–Fock–Breit(DHFB) or DHF methods , to calculation of heavy-atom molecules (followed by transformation of twoelectron integrals to the basis of molecular spinors) is not always an easy task because a very large set of primitive atomic basis functions can be required for such all-electron four-component SCF calculations. In the high-Z case the effects of relativity can be just as important as those of electron correlation, making it necessary to develop efficient methods for the simultaneous treatment of correlation and relativity [499]. Such a treatment can be made in the framework of post-DHF methods (very complicated in the practical realization) or relativistic DFT theory. Although the DFT method has been extensively applied to nonrelativistic calculations, the four-component DFT approaches have only recently appeared (see the book [335] and the review [499] and references therein). Relativistic versions of the Kohn–Sham equations have been developed based on the relativistic extension of the Hohenberg–Kohn theory [500]. The one-electron effective Hamiltonian for the Dirac–Kohn–Sham (DKS) method, as a relativistic extension of the conventional KS approach, takes the form, ˆ D + VH + VXC + βσ δEXC [ρ, m] ˆ DKS = h h δm(r)

(8.50)

8.3 Relativistic Effective Core Potentials and Valence Basis Sets

/

313



ρ(r ) ′ ˆ D is the one-electron Dirac operator (8.36), VH = where h |r−r ′ | dr is the Hartree potential, defined by the electron-charge spin density ρ(r). In contrast to the nonrelativistic theory the relativistic exchange-correlation potential consists of the spinindependent part (the functional derivative of the exchange-correlation energy funcδEXC XC ) and the spin-dependent part βσ δm(r) , tional with respect to total density δEδρ where m(r) is the spin magnetization vector [501]. The latter is defined as m(r) = occ ∗ ψiα ψi σψi , where ψi are two-component spinors ψi = and σ = (σx , σy , σz ) ψiβ i is the vector of the Pauli spin matrices. In the so-called “collinear approach” the vector m(r) is projected on the z-axis to define the spin density s(r) = mS (r) =  occ occ ∗  ∗ ∗ ψi σψi = ψiα ψiα − ψiβ ψiβ . The total density is given by i

i

ρ(r) =

occ 

ψi∗ ψi =

i

occ 

∗ ∗ ψiα ψiα + ψiβ ψiβ

i



(8.51)

where positron states are excluded by employing the so-called no-sea approximation. The DKS equation is then the matrix pseudoeigenvalue equation by introducing basis set expansion as, ˆ DKS C = SCE h (8.52) DKS ˆ where h takes the form of a Fock matrix   LL LL + JLL cΠLS Vµν µν − V(XC)µν µν DKS (8.53) hµν = SS SS 2 SS cΠSL Vµν + JSS µν µν − V(XC)µν − 2c Sµν XX In (8.53) V(XC)µν is the exchange-correlation potential defined by, XX V(XC)µν = χX µ|

δEXC X δEXC + |χ δρ δm(r) ν

(8.54)

During the last decade, good progress was attained in four-component techniques for molecules (see [496, 502, 503] and referencies therein) that allowed one to reduce efforts in calculation and transformation of two-electron matrix elements with small components of four-component molecular spinors. The straightforward DHF and DKS methods with the four-component spinors were implemented in several ab-initio MO LCAO programs: MOLFDIR, [504], DIRAC, [505], BERTHA, [506]. However, fully relativistic DFT calculations on molecules containing more than one or two heavy atoms are not yet routine. The efficient computational scheme for the Gaussian-based fully relativistic DHF and DKS methods is proposed in [496] and applied to hydrides MH and dimers M2 (M=Cu, Ag, Au). As the fully relativistic (four-component) calculations demand severe computational efforts, several quasirelativistic (two-component) approximations have been proposed in which only large components are treated explicitly. The approaches with perturbative treatment of relativistic effects [507] have also been developed in which a nonrelativistic wavefunction is used as reference. The Breit–Pauli (BP) approximation uses the perturbation theory up to the (p/mc)2 term and gives reasonable results in the first-order perturbation calculation. Unfortunately, this method cannot be used in

314

8 Basis Sets and Pseudopotentials in Periodic LCAO Calculations

variational treatment. One of the shortcomings of the BP approach is that the expansion in (p/mc)2 diverges in the case where the electronic momentum is too large, for example, for a Coulomb-like potential [496]. The zeroth-order regular approximation (ZORA), [509], can avoid this disadvantage by expanding in E/(2mc2 − V ) up to first order. The ZORA Hamiltonian is variationally stable. However, the Hamiltonian obtained by a higher-order expansion has to be treated perturbatively, similarly to the BP Hamiltonian. Two recently developed quasirelativistic approaches are considered in [496]. In particular, in the RESC method (the relativistic scheme by eliminating small components) the Hamiltonian is separated into the spin-averaged (scalar relativistic, which can be called the one-component approximation) and spin-dependent parts. The RESC approach has several advantages. It is variationally stable. This method can easily be implemented in various nonrelativistic ab-initio programs, and the relativistic effect is considered on the same footing with the electron-correlation effect. RESC has been applied to various systems in ground and excited states. As the energy gradient of the RESC method is also available it is possible to study the chemical reaction in the heavy-element systems (as an example, the ionization of OsO4 is considered in [496]). While accurate relativistic (both four- and two-component) calculations of simple heavy-atom molecules can be performed on modern computers the relativistic calculations of periodic systems are made mainly using relativistic effective core potential (RECP). We consider these potentials in the next section. 8.3.2 Relativistic Effective Core Potentials The two-component RECP approximation was suggested originally by Lee et al. [508] and is widely used in molecular calculations (see [487, 510, 511]). There are several reasons for using RECPs in calculations of complicated heavy-atom molecules, molecular clusters and periodic solids. As the nonrelativistic ECP approaches, the RECP approaches allow one to exclude the large number of chemically inactive electrons from calculations and treat explicitly only valence and outermost core electrons. The oscillations of the valence spinors are usually smoothed in heavy-atom cores simultaneously with exclusion of small components from the explicit treatment (quasirelativistic approximation). As a result, the number of primitive basis functions can be essentially reduced; this is especially important for calculation and transformation of two-electron integrals when studying many-atomic systems with very heavy elements including lanthanides and actinides. The RECP method is based on a welldeveloped earlier nonrelativistic technique of pseudopotential calculations; however, effective scalar-relativistic and spin-orbit interaction effects are taken into account by means of the RECP operator. Post-DHF correlation calculations with RECPs are performed in a natural way in the basis of spin-orbitals (and not of spinors as in all-electron four-component relativistic calculations) even for the cases when the Dirac–Coulomb–Breit(DCB) Hamiltonian is used [512]. Note, however, that the DCB technique with the separated spin-averaged and spin-dependent terms also has been developed [513], but it can be efficiently applied only in the cases when spin-dependent effects can be neglected both for valence and for core shells. In the RECP method, the interactions with the excluded inner core shells (spinors!) are described by spindependent potentials, whereas the explicitly treated valence and outer core shells can

8.3 Relativistic Effective Core Potentials and Valence Basis Sets

315

be described by spin-orbitals. This means that some “soft” way of accounting for the core-valence orthogonality constraints is applied in the latter case [514]. Meanwhile, the strict core-valence orthogonality can be retrieved after the RECP calculation by using the restoration procedures described below. The use of the spin-orbitals allows one to reduce dramatically the expenses at the stage of correlation calculation. Thus, many complications of the DC or DCB calculations are avoided when employing RECPs. When core electrons of a heavy atom do not play an active role, the effective Hamiltonian with RECP can be presented in the form HEf =

 iv

[hSchr (iv ) + UEf (iv )] +



iv >jv

1 riv jv

(8.55)

This Hamiltonian is written only for a valence subspace of electrons that are treated explicitly and denoted by indices iv and jv (large-core approximation). As in the case of nonrelativistic pseudopotentials, this subspace is often extended by inclusion of some outermost core shells for better accuracy (small-core approximation) but below we consider them as the valence shells if these outermost core and valence shells are not treated using different approximations. In (8.55), hSchr is the one-electron Schr¨ odinger Hamiltonian 1 Zic hSchr = − ∇2 − (8.56) 2 r where Zic is the charge of the nucleus decreased by the number of inner-core electrons. UEf in (8.55) is an RECP (relativistic pseudopotential) operator that is usually written in the radially local (semilocal) [510] or separable [515] approximations when the valence pseudospinors are smoothed in the heavy-atom cores. In LCAO calculations of heavy-atom molecules among the radially local RECPs, the shapeconsistent (or normconserving) RECP approaches [510] are employed and “energyconsistent” pseudopotentials by the Stuttgart–Dresden–Cologne group are also actively used [487,511,516]. The latter are now applied also in LCAO calculations of periodic systems with modified valence basis sets (see Sect. 8.3.5). To generate “energyconsistent” RECP the direct adjustment of two-component pseudopotentials is made (scalar-relativistic + spin-orbit potentials) to atomic total energy valence spectra. The latter is derived from the four-component multiconfiguration DHF all-electron atomic calculations based on the DCB Hamiltonian.The “energy-consistent” RECPs are now tabulated for all the elements of periodic table at the site www.theochem.unistuttgart.de. The adjustment of the pseudopotential parameters has been done in fully numerical atomic calculations, valence basis sets have been generated a posteriori via energy optimization. The complete set of potentials includes one-component (nonrelativistic and scalar-relativistic) effective-core potentials (ECP), spin-orbit (SO) and core-polarization potentials (CPP); only the one-component ECPs are listed in full. The “energy-consistent”pseudopotentials are under continuous development and extension [516, 517] and the corresponding Gaussian basis sets are published [518–520]. In plane-wave calculations of solids and in molecular dynamics, the separable pseudopotentials [93,492,515] are more popular now because they provide linear scaling of computational effort with the basis-set size in contrast to the radially local RECPs. Moreover, the nonlocal Huzinaga-type “ab-initio model potentials” [521–523] conserving the nodal structure for the valence spinors are often applied. Contrary to the

316

8 Basis Sets and Pseudopotentials in Periodic LCAO Calculations

four-component wavefunction used in DC(B) calculations, the pseudowavefunction in the RECP case can be both two- and one-component. The RECP operator simulates, in particular, interactions of the explicitly treated electrons with those that are excluded from the RECP calculations. The use of the effective Hamiltonian (8.55) instead of all-electron four-component Hamiltonians leads to the question about its accuracy. It was shown both theoretically and in calculations, see [514], that the typical accuracy of the radially local RECPs is within 1000–3000 cm−1 for transition energies between low-lying states though otherwise is sometimes stated, [481, 482]. In a series of papers [482, 514, 524, 525] a generalized RECP(GRECP) approach was developed that involves both radially local, separable and Huzinaga-type potentials as its components. Additionally, the GRECP operator can include terms of other types, known as “self-consistent” and two-electron “term-splitting” corrections [514], which are important particularly for economical (but precise!) treatment of transition metals, lanthanides and actinides. With these terms, the accuracy provided by GRECPs can be even higher than the accuracy of the “frozen-core” approximation (employing the same number of explicitly treated electrons) because they can account for relaxation of explicitly excluded (inner core) electrons [514]. In contrast to other RECP methods, GRECP employs the idea of separating the space around a heavy atom into three regions: inner core, outer core and valence, which are first treated by employing different approximations for each. It allows one to attain practically any desired accuracy for compounds of lanthanides, actinides, and superheavy elements as well, while requiring moderate computational efforts since the overall accuracy is limited in practice by possibilities of correlation methods. 8.3.3 One-center Restoration of Electronic Structure in the Core Region It should be noted that calculation of such properties as spin-dependent electronic densities near nuclei, hyperfine constants, chemical shifts, etc. with the help of the two-component pseudospinors smoothed in cores is impossible. However, the above properties (and the majority of other “core-type” properties of practical interest that are described by the operators heavily concentrated within inner cores or on nuclei) are mainly determined by the electronic densities of the valence and outer core shells near to, or on, nuclei. The valence shells can be open or easily perturbed by external fields, chemical bonding, etc., whereas outer-core shells are noticeably polarized (relaxed) in contrast to the inner-core shells. Therefore, accurate calculation of electronic structure in the valence and outer-core region is of primary interest for such properties. The electronic densities evaluated from the two-component pseudowavefunction very accurately reproduce the corresponding all-electron four-component densities in the valence and outer-core regions not only for the state used in the RECP generation but also for other states that differ by excitations of valence electrons. In the inner-core region, the pseudospinors are smoothed, so that the electronic density with the pseudowavefunction is not correct. When operators describing properties of interest are heavily concentrated near or on nuclei, their mean values are strongly affected by the wavefunction in the inner region. The proper shapes of the valence four-component spinors must, therefore, be restored in atomic core regions after performing the RECP calculation. The applicability of the above two-step algorithm for calculation of wavefunctions of systems containing heavy atoms is a consequence of

8.3 Relativistic Effective Core Potentials and Valence Basis Sets

317

the fact that the valence and core electrons may be considered as two subsystems, interaction between which is described mainly by some integrated properties of these subsystems. The methods for consequent calculation of the valence and core parts of electronic structure give a way to combine the relative simplicity and accessibility both of RECP calculations in Gaussian basis set and of relativistic finite-difference one-center calculations inside a sphere with the atomic core radius. In 1959, a nonrelativistic procedure of restoration of the orbitals from smoothed Phillips–Kleinman pseudo-orbitals was proposed [473] based on the orthogonalization of the latter to the original atomic core orbitals. In 1985, Pacios and Christiansen [526] suggested a modified orthogonalization scheme in the case of shape-consistent pseudospinors. At the same time, a simple procedure of “nonvariational” one-center restoration (NOCR) employing the idea of generation of equivalent basis sets in four-component DHF and two-component RECP/SCF calculations was proposed by Titov and first applied in the calculations of the PbF molecule. Later, the two-step RECP/NOCR calculations of the hyperfine structure constants and other properties were performed for the XF molecules and radicals, X=Pb,Yb,Ba [527–531], the TlF [532] and PbO [533, 534] molecules, and the molecular ion HI+ , [535]. In 1994, a similar procedure was used by Bl¨ochl inside the augmentation regions [536] in solids to construct the transformation operator between pseudo-orbitals and original orbitals in his projector augmentedwave (PAW) method. The NOCR scheme consists of the following steps [537]: •

Generation of equivalent basis sets

 fnlj (r)χljm and smoothed twognlj (r)χ2j−l,jm component pseudospinors f˜nlj (r)χljm in finite-difference all-electron Dirac–Fock(– Breit) and RECP/SCF calculations of the same configurations of a considered atom and its ions. The χljm is the two-component spin-angular function, the fnlj (r) and gnlj (r) are the radial parts of the large and small components of Dirac spinors, respectively. The nucleus is usually modeled by a Fermi-charge distribution within a sphere. The all-electron four-component and two-component calculations are employed to generate two equivalent numerical basis sets used at the restoration. These sets, describing mainly the atomic core region, are generated independently of the basis set used for the RECP calculations. The molecular pseudospinorbitals from the RECP calculation are then expanded in the basis set of one-center two-component atomic pseudospinors (for r≤Rnocr , where Rnocr is the radius of restoration that should be sufficiently large for calculating core properties with the required accuracy), of one-center four-component spinors



φ˜p (x) ≈





L max j=|l+1/2|  

cpnljm f˜nlj (r)ωljm ,

(8.57)

l=0 j=|l−1/2| n,m

where x denotes spatial and spin variables Finally, the atomic two-component pseudospinors in the basis set are replaced by equivalent four-component spinors and the expansion coefficients from (8.57) are preserved:

318

8 Basis Sets and Pseudopotentials in Periodic LCAO Calculations

φp (x) ≈

L max j=|l+1/2|   l=0 j=|l−1/2| n,m

cpnljm



fnlj (r)ωljm gnlj (r)ω2j−l,jm



.

(8.58)

The four-component spinors constructed in this way are orthogonal to the innercore spinors of the atom, because the atomic basis functions used in (8.58) are generated with the inner-core shells treated as “frozen”. 8.3.4 Basis Sets for Relativistic Calculations of Molecules The fully relativistic (four-component) LCAO calculations of molecular systems use contracted Gaussian-type spinors as the basis: two scalar wavefunctions within a twocomponent basis spinor are multiplied by a common expansion coefficient, for dimensions n of both the large and small components the total number of variational parameters (the scalar expansion coefficients) is equal to 2n [496]. In the relativistic correlated calculations the atomic basis sets should be optimized in the atomic correlated calculations. As Alml¨ of and Taylor showed [538], atomic basis sets optimized to describe correlations in atoms also describe correlation effects in molecules very well. The two main types of basis sets are used in correlation calculations of molecules: basis of atomic natural orbitals (ANO) suggested by Alml¨ of and Taylor [538]; correlationconsistent (CC) basis set suggested by Dunning [462]. Atomic natural orbitals {ψp } are obtained by unitary transformation of some set of orthonormal basis functions {φp }. Natural orbitals diagonalize density matrix Dij for some state (or group of the states) of the atom or its ions:   ρ(r, r ′ ) = Dpq φ†p (r)φq (r ′ ) = np ψp† (r)ψp (r ′ ) (8.59) p,q

p

where np are occupation numbers. Only those {ψp } are selected in the ANO basis set for which np is greater than some threshold: np ≥ nthr ; nthr ∼10−3 − 10−5 . Unlike the ANO scheme, the different number of primitive Gaussian functions are used in each basis set in the CC approach. Exponents of the polarization-correlation functions are optimized in correlation calculations of the atomic terms to provide the lowest possible total energy. It turns out that basis functions can be separated in groups and every function in each group lowers the total energy approximately by the same amount. Correlation-consistency means that whole groups of functions are added to the basis set, not just separate functions. Both ANO and CC schemes have a number of advantages, i.e. the ANO basis set is relatively easy to construct and the smaller ANO basis is just a subset of the larger one. Advantages of the CC basis are the smaller number of the primitive functions and a natural criterion for estimation of the completeness of the basis set. The following disadvantages can be emphasized for CC and ANO basis sets: •



for heavy atoms with many electrons, the number of ANO and CC functions becomes too large to obtain satisfactory accuracy in transition energies and properties. Even for the light Ne atom, ANO basis sets obtained in correlation CI-SD calculation are [3s 2p 1d] with nthr ∼10−3 and [5s 4p 3d 2f 1g] for nthr ∼10−5 ; “occupation number-optimized” (ANO) or “energy-optimized” (CC) basis sets do not take into account special features of one or another property and do not reflect properly the state of the “atom-in-molecule”;

8.3 Relativistic Effective Core Potentials and Valence Basis Sets



319

the incompleteness of atomic basis sets with the change of internuclear distance leads to basis-set superposition error (BSSE). This error is usually corrected by a “counterpoise” correction [539] that is calculated rather arbitrarily (it depends, in particular, on the atomic state used for its calculation) for ANO and CC basis sets.

The generalization of the correlation-consistent scheme of the basis-set generation was suggested, see [524] and references therein, which allows one to control effectively the quality of the basis set in different space regions depending on the property of interest. Practically all properties can be divided into two groups: (1) “valence” properties, which are determined by the wavefunction in the valence region, like dissociation energy or transition energies and (2) “core” properties, which are described by operators heavily concentrated near the nuclei of the heavy atom, like the hyperfine structure. The calculations of the different kind of properties require, in principle, different optimization criteria for basis sets. The generalized correlation (GC) basis set is constructed in the following stages: 1 Generation of the trial spin-orbitals, two-component spinors or four-component spinors in the atomic SCF calculation with numerical functions. Functions are obtained in SCF calculations of the atom and its ions, thus trial functions are localized in valence or outer-core regions. 2 Criterion of choice of the optimal function is the maximization of some functional that depends on total energies of the states and transition energies between them. The energies of the states are obtained in some correlation calculation of the group of the states that describe an “atom-in-molecule” in the best way. The choice of the energetic functional is the key element of the GC-basis generation. 3 The resulting sets of functions are approximated by Gaussian functions with the same exponents for each l (or pair of lj) by the least square fit. A commonly used choice of the functional is: Fc (∆E1 , . . . , ∆EM ) =

M 1  ∆Ei M i

(8.60)

Here, Fc is the change in the average energy for some considered group of the lowestlying terms. The functional used in the GC generation scheme can be chosen as follows: M

Fv (∆E1 , . . . , ∆EM ) = max |∆Ei − ∆Ej | i>j

(8.61)

where M is the number of atomic terms, ∆Ei ≥ 0 is the lowering of the total energy of the ith term in comparison to calculation without the given function. Thus, Fv presents the maximal change in transition energies. (Some other versions of the functional on changes of transition energies can also be used but their results are not very different.) Functional Fc is reasonable to use for generation of the GC basis for “core” properties, while Fv can be used when one is interested in “valence” properties. When only valence electrons are correlated, any functional can be used since the function giving the maximal change in total energy, as a rule, also provides the maximal change in

320

8 Basis Sets and Pseudopotentials in Periodic LCAO Calculations

transition energies in this case. In a universal scheme, both of the above functionals can be applied together when Fc is used in the first step to select the most important correlation functions and then, Fv is used (see also [540] for a variational justification of the suggested functionals). If the effect of atomic polarization is important the GC basis can be augmented by diffuse polarization functions, whose exponents are optimized in the SCF calculation of an atom in an electric field. The valence basis sets, used in relativistic molecular calculations, have to be in correspondence with RECP used in the basis set optimization. As was already mentioned the basis sets corresponding to the “energy-consistent” RECP can be found on the site www.theochem.uni-stuttgart.de. Highly accurate relativistic Gaussian basis sets are developed for the 103 elements from H to Lr [544]. Orbital exponents are optimized by minimizing the atomic selfconsistent field (SCF) energy with the scalar relativistic approximation. The basis sets are designed to have equal quality and to be appropriate for the incorporation of relativistic effects. The basis-set performance was tested by calculations on prototypical molecules, hydrides, and dimers of copper, silver, and gold using SCF, MP theory, and the single and double coupled-cluster methods. Spectroscopic constants and dissociation energies are reported for the ground state of hydrides, which agree well with the experimental data (the mean absolute error relative to the experiment in dissociation energy, equilibrium bond length and harmonic frequency is 0.09eV , 0.003 ˚ A, and 2 cm−1 , respectively). The optimized Slater-type basis sets for elements 1–118 are developed in [545]. The exponents of the Slater-type functions are optimized for the use in scalar-relativistic zero-order regular approximation (ZORA). These basis sets are used in DFT code ADF [345] for calculations of molecules and solids. The use of RECP and valence basis sets for periodic systems is considered in the next section. 8.3.5 Relativistic LCAO Methods for Periodic Systems The influence of relativistic effects on the structural and electronic properties of the crystals with heavy elements is well known [541]. One important effect is the strong relativistic contraction of s and p orbitals due to the non-negligible probability to find them close to the nucleus; in turn d and f orbitals are stretched due to indirect relativistic effects. This largely affects the interatomic distances, the cohesive energies, the one-electron energies, etc. This effect can be partly handled within the scalar relativistic (SR) calculation, neglecting spin-orbit interaction. Another important relativistic effect is due to the spin-orbit coupling, which plays an essential role in the magnetic properties of solids [546]. The spin-orbit coupling requires more elaborate treatment beyond the SR calculations, i.e. the twoor four-component relativistic calculations. The four-component DHF LCAO equations for 1D-, 2D- and 3D-periodic systems were at first presented by Ladik [547]. The resulting somewhat complicated generalized matrix eigenvalue equation for solids is described (for details we refer the reader to [547]). It was also shown for 1D and 2D systems how MP2 methods could be applied in their relativistic form. With the help of these, on the one hand, the total energy per unit cell (including correlation effects) can be computed. On the other hand, the relativistic band structure can also be corrected for correlation. Note that the symmetry of crystalline orbitals changes, compared with the nonrelativistic case, as the symmetry of the DHF Hamiltonian is described by double space groups. Finally,

8.3 Relativistic Effective Core Potentials and Valence Basis Sets

321

a scheme is proposed in which most of the electrons are treated in the standard way (Dirac–Hartree–Fock equations with only Coulomb interactions and calculation of all the other terms with the aid of first-order perturbation theory), while for the core electrons of large-Z atoms or ions, the generalized relativistic HF equations are used. Therefore, one applies the solutions of the generalized relativistic HF equations for the construction of the relativistic Slater determinant in the case of core electrons, while for the rest of the electrons the one-electron functions are obtained from the standard Dirac–Hartree–Fock equations. Unfortunately, the application of this fully relativistic theory (involving four-component spinors built in terms of a large and small component) is practically too difficult not only for solids but even for molecular systems (this application is limited to small-size molecules). As was noted in the preceding sections the relativistic calculations of molecular systems are made in quasirelativistic (two-component) approximations based on Hamiltonians operating on the large component only. Between different alternatives to decouple large and small components for molecules and solids the Douglas–Kroll–Hess (DKS) approach [548,549] is the most popular as this approach is variationally stable (and therefore can be incorporated into SCF calculations) and allows its accuracy to be improved [550]. In the DKS approach the decoupling of large and small components of the Dirac Hamiltonian is made through a sequence of unitary transformations † † Hm = Um Um−1 · · · U1 U0 HD U0† U1† · · · Um−1 Um

(8.62)

Each transformation Un is chosen in such a way that the offdiagonal blocks of the Dirac Hamiltonian are zero to a given order in the potential. The decoupled, blockdiagonal transformed Hamiltonian  L  HDKHn O(V n ) Hn = (8.63) S O(V n ) HDKHn L is the two-component effective Hamiltonian to The large-component block, HDKH n be included in the electronic-structure calculation. The order n of transformation can be systematically increased to improve the accuracy of transformation. Two classes of operators are involved in the construction of the DKHn Hamiltonian: a function of the square of the momentum f (P 2 ), p = −i∇ and those involving the potential V, (σp)V (σp), where σ are the Pauli spin-matrices [550]. The explicit form of HDKHn up to fifth order was derived in [551, 552]. The DKH approach leads to a two-component formalism, which is separable in a spin-averaged (spin-free) and spin-dependent part. In the scalar-relativistic (SR) approximation the spin-dependent part is ignored. The DKH transformation for the one-electron operators in scalarrelativistic HF LCAO calculations with periodic boundary conditions is used in [553] and implemented in CRYSTAL88 code. The fact that scalar-relativistic effects are short range was made use of so that the electrostatic potential calculated by the Ewald method was not relativistically corrected. The results of SR HF LCAO calculations [553] of silver halides AgX (X=F, Cl, Br) with the fcc NaCl structure are presented in Table 8.6. The reoptimized uncontracted correlation corrected basis sets were used. The diffuse exponents (< 0.04) in the basis set for Ag were discarded. The results given in Table 8.6 demonstrate the influence of scalar-relativistic effects in the AgX crystals

322

8 Basis Sets and Pseudopotentials in Periodic LCAO Calculations Table 8.6. Scalar-relativistic effects in AgX (X=F, Cl, Br) crystals, [553] Property Lattice parameter (˚ A)

AgF 5.175 (5.191)

AgCl 5.937 (5.990)

AgBr 6.207 (6.260)

Ag 4.456 (4.546)

Binding energy (kJmol−1 )

–371.2 (–407.5)

–385.9 (–417.7)

–333.4 (–362.8)

–53.0 (–39.4)

459 (460)

306 (297)

273 (259)

298 (322)

Bulk modulus (kbar)

properties (the results of nonrelativistic HF LCAO calculations are given in brackets, the binding energy is given with reference to the HF ground-state energies of the free atoms). It is seen that lattice parameters show small relativistic effects – they decrease (up to 2% for Ag) as compared to the nonrelativistic values. The binding energies demonstrate a remarkable bond destabilization (up to 8.9% for AgF and 34.5% for Ag as compared to the nonrelativistic values). Bulk moduli change up to 7.5% (for Ag). Though scalar-relativistic effects of silver compounds are expected to be relatively small (compared with the compounds of heavier elements), remarkable changes of the HF binding energy and of the bulk modulus are observed. We note that in the relativistic HF calculations the correlation effects are not included explicitly in the Hamiltonian (the correlation correction is included only in AO basis sets). In Table 8.7 properties of AgCl crystal are compared at various levels of theory. Table 8.7 demonstrates good agreement for the lattice parameter and bulk modulus between HF calculations with RECP (Hay–Wadt RECP is used) and the scalar (one-component) relativistic HF DKH approach. Slight differences are seen for the binding energy. Table 8.7. Crystal properties of fcc AgCl at various levels of theory [553] Method

Total energy (a.u.)

Lattice const. (˚ A)

Binding energy (kJ mol−1 )

Bulk modulus (kbar)

Nonrel. HF

–5656.601

5.990

–417.7

297

Rel. HF

–5771.344

5.937

–385.9

306

HF RECP

–159.709

5.943

–376.5

307

DFT ECP

–160.870

5.610

–514.6

560



5.510

–519.8

535

Exper.

We noted that it is necessary to simultaneously include the relativistic and correlation effects in the Hamiltonian. Such inclusion for periodic systems is usually made in the relativistic DFT approaches. The fully relativistic LCAO method for solids, based on the DKS scheme in the LDA approximation was represented in [541]. The basis set consists of the numericaltype orbitals constructed by solving the DKS equations for atoms. This choice of basis set allows the spurious mixing of negative-energy states known as variational collapse to be overcome. Furthermore, the basis functions transform smoothly to those in the nonrelativistic limit if one increases the speed of light gradually in a hypothetical way.

8.3 Relativistic Effective Core Potentials and Valence Basis Sets

323

This is also an important feature to avoid the variational collapse. The proposed approach was applied to Au and InSb crystals. The basis functions were chosen so that they have enough variational flexibility: not only were used AOs of neutral atoms but also those of positive ions Au+ , Au2+ , Au3+ , In2+ , Sb2+ . In the comparison for Au the results of scalar- and two-component relativistic calculations (lattice constant and bulk modulus) indicates that the spin-orbit coupling plays a minor role in the structural properties of Au. The comparison of results of the relativistic calculations with those of the nonrelativistic calculations shows that the lattice constant is overestimated by 5% and the bulk modulus is underestimated by 35% in nonrelativistic calculations. This strongly shows the importance of the inclusion of the relativistic effects in the study of the structural properties of Au. In contrast with the case of Au, the results of nonrelativistic calculations of InSb are not so poor; the error in the lattice constant is 1% and the error in the bulk modulus is 10%. This should be due to the fact that In and Sb are not so heavy that the relativistic effects do not play an important role in studying the structural properties of InSb. The implementation of scalar relativity in an all-electron LDA linear combinations of the Gaussian-type orbitals (LC-GTO) method for solids was reported by Boettger [542] and applied for crystalline Au with a fcc lattice. This initial implementation was later extended to include spin-orbit coupling terms, produced in the second-order DKH transformation. The GTO Au atomic basis set of 19s14p10d5f primitive GTOs was derived from scalar-relativistic (SR) and nonrelativistic (NR) calculations of paramagnetic atom. These calculations show that bulk and one-electron properties obtained by the LCGTO method, are very close to those obtained with allelectron, scalar-relativistic DFT techniques using other basis sets (LAPW or LMTO SR methods). The efficiency of the LCGTO approximation in relativistic calculations of solids was demonstrated also in the calculations of equilibrium volumes and bulk moduli for the light actinides Th through Pu [555]. It is concluded that two independent (both scalar and quasirelativistic) electronic-structure DFT methods with the different choice of basis set (LCGTO and LAPW) are in good agreement with each other. Table 8.8 shows this agreement for fcc Th and Pu metals giving numerical values of the equilibrium volume V (a.u) and the bulk modulus B (GPa), for comparison also results of FPLMTO calculations are given. The agreement between LCGTO and FPLAPW results is important, keeping in mind the primary advantage of LCAO methods over other existing DFT approaches (FLAPW, FLMTO)- the possibility of LCAO methods to treat both molecular and periodic systems and in this way to bridge the gap between quantum chemistry and solid-state physics. Comparison of the nonrelativistic and scalar-relativistic results for fcc Au reveals the large impact that relativity has on the lattice constant (6%) and bulk modulus (57%) [542]. The most important qualitative change in the band structure of fcc Au is the more than 2-eV lowering of the s-band relative to the bottom of dbands. In addition, the overall width of the d-bands is increased by more than 15% due to a relativistic delocalization of the d- states. The spin-orbit coupling included LCGTO DFT-GGA calculations were made for fluorite structure actinide oxides MO2 (M=Th,U,Pu) and their clean and hydroxylated surfaces, [556], magnetic ordering in fcc Pu [557] and bulk properties of fcc Pb [558]. In the calculations using nonrelativistic LCAO codes for solids the relativistic effects are included implicitly in RECPs and basis sets. In the relativistic calculations

324

8 Basis Sets and Pseudopotentials in Periodic LCAO Calculations

Table 8.8. Equilibrium volume V (a.u) and bulk modulus B (GPa) for Th and Pu with FP-LMTO, LCGTO and FPLAPW calculations, using DFT LDA and GGA Hamiltonians, with and without spin-orbit (SO) effects included [555]. Experimental data for fcc Th: V =221.7 a.u., B=58 GPa fcc Th

fcc Pu

LDA

+SO

GGA

+SO

LDA

+SO

GGA

+SO

V

-

182.1

-

199.9

109.2

-

119.2

-

B

82.6

61.5

-

-

214

-

143

-

LCGTO

V

200.5

199.3

216.9

214.8

111.5

125.7

121.2

141.4

B

64.8

71.7

58.8

63.4

218

124

170

97

FPLAPW

V

199.7

204.1

219.3

218.1

111.9

120.2

122.3

133.4

B

61.0

78.6

56.7

73.1

194

143

153

121

FPLMTO

of periodic systems RECPs of the Stuttgart-K¨ oln group (energy-consistent RECPs) are often applied. These RECPs (and the corresponding basis sets) are obtained in the relativistic DHF atomic calculations and are tabulated as the linear combination of GTFs, see www.theochem.uni-stuttgart.de. As was noted in Sect. 8.1, the basis sets generated for molecular calculations have to be adapted for the periodic systems calculations. As an example we mention the valence basis sets for lanthanide 4f-in-core relativistic pseudopotentials, adapted for crystal orbital ab-initio calculations [559]. The crystalline calibration calculations were made for Ln2 O3 (Ln=La–Pm) crystals with hexagonal space group P 3m1 and one formula unit per cell. The calibration within the HF and DFT schemes was made using the CRYSTAL03 code [23]. To verify these basis sets the calculated geometries and cohesive energies were compared with experimental data. The valence basis sets adapted for crystal calculations restore the calculated cohesive energy of Ln2 O3 (Ln = La–Nd) to more than 88% of the experimental data within the a-posteriori HF correlation scheme in combination with gradient-corrected functionals. Good agreement has also been found between the conventional DFT results and the experimental cohesive energy with a deviation of only a few per cent. The implementation of the LCGTO relativistic two-component DKH approximation in a fully self-consistent all-electron DFT approach for molecules (this implementation requires changes to be made in the Hamiltonian [550]), allows the RECP results (when the nonrelativistic calculations are made with the use of relativistic pseudopotentals) to be compared with those obtained in scalar-relativistic and two-component relativistic calculations. Such a comparison was made in [560] for the bond dissociation energy in the UF6 molecule, obtained from the relative energies of the fragments (UF6 = UF5 + F), corrected for zero-point energy and spin-orbit interaction. The small-core RECP PBE0 and B3LYP calculations give the bond-dissociation energy as 68.34 and 69.59 kcal/mole, respectively, all-electron two-component relativistic PBE0 and B3LYP calculations – the values 68.94 and 70.39 kcal/mole, while the experimental values are given between 69.5 and 73 kcal/mole. Note that the large-core RECP result is off by more than 50% so that to obtain a good agreement with experiment one needs to work with a hybrid density functional and small-core RECP.

8.3 Relativistic Effective Core Potentials and Valence Basis Sets

325

This conclusion was taken into account in RECP calculations of crystals. RECP hybrid DFT calculations were made for PtO crystal [421]. For Pt, 60 core electrons [Kr]4d10 4f 14 were replaced with the small-core relativistic Stuttgart–Dresden effective core potentials RECPs. A valence basis set was optimized for Pt considering 5s, 5p, 5d, 6s, and 6p orbitals. This basis set circumvents numerical linear dependencies in periodic calculations and it is of similar quality to the Stuttgart basis set for most practical applications. Benchmark calculations in PtO using the 6-31G(d), the 6-311G(d), and 8-411G(d) basis sets for oxygen showed that these three bases yielded similar results. RECPs of the Stuttgart group were also applied in periodic hybrid DFT calculations of PuO2 , Pu2 O3 [422], PtN [420], UO2 [543]. The molecular calculations [550, 560] allow us to conclude that the DKH approximation in combination with hybrid DFT functionals provides a reliable tool for the prediction of structural and thermochemical properties of molecules. The all-electron DFT LCAO approach with Gaussian basis sets was extended to scalar-relativistic calculations of periodic systems [561]. The approach is based on a third-order DKH approximation, and similar to the molecular case, requires only a modification of the one-electron Hamiltonian. The effective core Hamiltonian is obtained by applying the DKH transformation to the nuclear–electron potential VN . Considering that relativistic effects are dominated by the short-range part of the Coulomb interaction, it is proposed to replace the nuclear–electron Coulomb operator used to build the DKH Hamiltonian by a short-range Coulomb operator Z V ζ (r) = − erf c(ζr) r

(8.64)

where the complimentary error function screens the long-range tail of the potential. The use of the complimentary error function simplifies the calculation of the matrix elements between GTOs, but in general, any screening function could be employed. The correct nonrelativistic long-range behavior of the Coulomb operator is retained if the core Hamiltonian is defined as ζ Hcore = HDKHn − VNζ + VN

(8.65)

where the supraindex stands for quantities involving the short-range potential given by (8.64). The parameter ζ switches from a Hamiltonian where only the free-particle (averaged) kinetic energy is relativistically corrected (ζ → ∞), to the full-range DKHn ζ Hamiltonian (ζ = 0). In this way, the relativistic term HDKHn − VNζ for periodic ζ ζ systems can be evaluated using VN and pVN p obtained by adding contributions from a finite number of cells in direct space. It should be pointed out that the summation of VNζ and pVNζ p for ζ = 0 diverges. The divergent term can be removed from the summation by adding a uniform charge-canceling background, as is usually done in ζ Ewald-type summations. For the relativistic term HDKHn −VNζ the contribution from the uniform background is exactly zero, since the DKH transformation does not change a uniform potential. The choice of ζ only affects the relativistic correction to the core Hamiltonian, while the nonrelativistic electrostatic contributions are entirely done using FMM, see Chap. 7. The tests on bulk systems by changing the value of ζ from 0.05 a.u to 0.5 a.u., showed that the lattice constants, bulk moduli, and bandgaps are rather insensitive to ζ in this range [561], (ζ =0.1 has been chosen in the discussed

326

8 Basis Sets and Pseudopotentials in Periodic LCAO Calculations

calculations). In this approach, relativistic effects are included through the nucleus– electron interaction, while the electron–electron, Coulomb, the portion of Hartree– Fock exchange, and DFT exchange-correlation potential remain nonrelativistic. Such a strategy has been successfully employed for molecules and solids earlier. The benchmark scalar-relativistic calculations [561] were made for the bulk metals (Pd, Ag, Pt and Au) and the large bandgap semiconductors AgF and AgCl. It was shown that scalar-relativistic effects reduce the lattice constant by 0.06–0.10 ˚ A for the 4d metals (Pd and Ag), and by 0.14–0.22 ˚ A for the 5d metals (Pt and Au). For the 4d metals, scalar-relativistic effects increase the calculated bulk moduli by 20–40 GPa, while for the 5d metals this increase is between 60 GPa and 100 GPa. For both AgF and AgCl crystals scalar-relativistic effects decrease the energy gap – by 1.0 eV for AgF and 0.9 eV for AgCl. The DKH approach allows relativistic all-electron DFT calculations to be performed using the traditional LDA and GGA approximations, as well as meta-GGA and hybrid density functionals. Slater-type basis sets were used in the relativistic DFT calculations, based on the ZORA Hamiltonian and applied for heavy metals and their surfaces [562, 563]. Concluding this chapter we note that the relativistic correlated calculations of solids are mainly made in the DFT scheme. The post-DHF methods for solids wait their further development and implementation in computer codes for periodic systems.

9 LCAO Calculations of Perfect-crystal Properties

In the next three chapters we illustrate the possibilities of LCAO methods in the calculations of different crystalline-solid properties. We do not discuss here the electron–phonon and isotope effects on the optical spectra of solids. In [564, 565] these effects were studied in the framework of the tight-binding (TB) LCAO approach for several semiconductors with diamond and zincblende structure. The results reproduce the overall trend of the available experimental data for the bandgap as a function of temperature, as well as give correctly the mass dependence of the bandgap. The TB approach represents a conceptual bridge between ab-initio simulations and model-potential ones. In particular, the coupling of TB with the molecular dynamics (MD) generates the TBMD method as a valuable tool for atomic-scale materials modeling [566]. A description of the TB method can be found, for example, in [6,567]. In this chapter the perfect-crystal properties are considered: the analysis of chemical bonding on the basis of population analysis, the one-electron properties and properties, defined by the total energy and its derivatives and the magnetic ordering in crystals. In Chap. 10 we discuss the models of crystals with point defects and calculation of their properties by LCAO methods. In Chap. 11 the possibilities of LCAO methods in surface modeling are illustrated by numerous results of recent LCAO calculations. We refer the reader to the very informative review article [568], where it is possible to find many illustrations of ab-initio simulation possibilities in the area of solid-state chemistry, physics, materials and surface science, and catalysis. This publication is especially useful as an introductory overview for the reader who is not acquainted with solid-state simulation. All the examples discussed in [568] have been generated with the CRYSTAL code and implemented by the authors and collaborators. CRYSTAL was the first periodic ab-initio code to be distributed to the scientific community beginning in 1989. Now, several ab-initio LCAO codes are available to users (see Appendix C), but the CRYSTAL code remains the most user-friendly and fast-developing code being applied now in more than 200 research groups in the world.

328

9 LCAO Calculations of Perfect-crystal Properties

9.1 Theoretical Analysis of Chemical Bonding in Crystals 9.1.1 Local Properties of Electronic Structure in LCAO HF and DFT Methods for Crystals and Post-HF Methods for Molecules Crystals, like molecules, are made up of atoms interacting with one another, which gives rise to electronic-density localization along bonds (covalent solids), around atomic nuclei (ionic crystals), or to the more complex and most widespread pattern of electronic-density distribution. Considered in Chap. 4, the density matrix of molecules and crystals in the LCAO approximation permits one to derive the local characteristics of the electronic structure employed usually when describing chemical bonding in molecules or crystals (the electronic configuration of an atom, atomic charges QA , atomic bond orders WAB and covalency CA , and the total and free atomic valences). In molecular quantum chemistry such calculations are known as population analysis. In molecular theory the local electronic-structure characteristics were introduced at first for the orthogonal atomic basis used in semiempirical ZDO calculations (see Chap. 6), with subsequent generalization to the case of a nonorthogonal basis employed in nonempirical HF and DFT calculations [96, 569, 570]. The first attempts at a theoretical determination of local electronic-structure characteristics of periodic systems were made later: for the orthogonal basis set used in semiempirical versions of the HF method in [571, 572] and for the nonorthogonal AO basis – in [573, 574]. Note that determination of local characteristics of electronic structure by traditional methods of solid-state physics, which make use, as a rule, of the plane-wave basis, requires special projection techniques (see Sect. 9.1.4), involving additional approximations to calculate electronic-density-matrix elements in an atomic basis. The local properties of the electronic structure of a periodic system are defined by the density matrix ρ(R, R′ ),see (4.91); the electron position vectors R and R′ vary within the basic domain of a crystal consisting of N primitive unit cells. For a onedeterminant wavefunction the density matrix can be expressed through Bloch-type σ spin orbitals ψik (R)(σ = α, β): ρ(R, R′ ) = ρα (R, R′ ) + ρβ (R, R′ ) =

occ   σ

i

σ σ∗ ψik (R)ψik (R′ )

(9.1)

k

In the LCAO approximation σ (R) = ψik



σ Ciµk χµk (R)

(9.2)

µ

1  χµk (R) = √ exp(ikRn )χµ (R − RA − Rn ) N n

(9.3)

where χµ (R − RA − Rn ) = χAn µ (R) is the atomic orbital centered on atom A in the primitive unit cell with a translation vector Rn . In the basis of Bloch sums χµk (R) the overlap matrix Sµν (k) and density matrix Pµν (k) are introduced:   exp(ikRn ) χ∗µ (R − RA )χν (R − RB − Rn )dR (9.4) Sµν (k) = n

9.1 Theoretical Analysis of Chemical Bonding in Crystals σ Pµν (k) =

occ 

σ∗ σ Ciµk Ciµk

329

(9.5)

i

σ The expansion coefficients Ciµk are calculated by solving the matrix equation of the CO LCAO method for crystals, see (4.67):

F σ (k)C σ (k) = S(k)C σ (k)E σ (k)

(9.6)

In (9.6) F σ (k) is the matrix of the Hartree–Fock (HF) or Kohn–Sham (KS) operator. The former operator includes a nonlocal exchange part, depending on the density matrix ρ(R, R′ ), whereas the latter operator involves the electron density ρ(R) = ρ(R, R), that is, it depends only on the diagonal elements of the density matrix, see Chapters 4 and 7. In view of the translational symmetry of a crystal, one can introduce density normalization per primitive unit cell containing n electrons: Sp(P S) =

 1  A0,A0 [P (k)S(k)]µµ = (P S)µµ =n N µ µ

(9.7)

k

The Mulliken population analysis may be extended to crystalline solids [573,574,576] giving the following definitions for an electronic population NA0 on an atom, atomic charge QA0 , bond order WA0,Bn , covalency CA0 , and the total valency VA0 (A0, Bn mean atom A in the reference unit cell and atom B in the unit cell with a translation vector Rn ):    A0,A0 RA0,Bn (9.8) Pµµ + RA0,B0 + NA0 = µ∈A0

n=0 B

B ∈A0

where the overlap population is defined as   A0,Bn Bn,A0 Pµν Sνµ RA0,Bn =

(9.9)

µ∈A0 ν∈Bn

and the atomic charge as QA0 = ZA0 − NA0

(9.10)

In (9.10) ZA0 is the nuclear charge for the all-electron calculation or the core charge if the pseudopotential approximation is used. The bond order and covalency are     A0,Bn Bn,A0 A0,Bn Bn,A0 WA0,B0 = (P S)µν (P S)νµ + (P s S)νµ (P s S)νµ (9.11) µ∈A0 ν∈Bn

CA0 =



B =A0

WA0,B0 +



n=0 Bn

WA0,Bn = 2NA0 − WA0,A0

(9.12)

In (9.11), P = P α + P β and P s = P α − P β . In deriving (9.12) the idempotency 2 relation for the density matrix in the nonorthogonal AO basis (P S) = 2 (P S) − 2 s (P S) was used (see (4.130). Equations 9.11 and 9.12 are applied in unrestricted HF (UHF) or spin-polarized (SP)KS calculations. For the closed-shell case (RHF and KS calculations) P α = P β and P s = 0. The definition of the total valency of the atom accounting for both the ionic (electrovalence) and covalent (covalence) components of chemical bonding was suggested

330

9 LCAO Calculations of Perfect-crystal Properties

in [571] for molecular systems and extended to crystalline solids in [572]. The atomic total valence is of the form   6 1 2 + 4Q2 VA0 = (9.13) CA0 + CA0 A0 2 To study the influence of the correlation effects on the local properties of electronicstructure DFT or post-HF methods can be used. If the KS equations are solved the definitions (9.8)–(9.13) of local properties include the correlated density matrix and therefore take into account the correlation effects. We note that there are no rigorous quantum-mechanical definitions for the local characteristics of the electronic structure. The definitions given above require the LCAO approximation, and the numerical results depend on the choice of atomic basis. In attempting to separate an atomic subsystem or a molecular subsystem in systems with a strong coupling, we should refuse to describe this subsystem by using pure states, which leads to considerable conceptual and computational problems. For example, an atomic subsystem in a molecular system, as a rule, cannot be assigned a certain integral number of the electrons involved (the calculated atomic electronic population (9.8) is noninteger), which implies that this subsystem should be represented by an ensemble of states matched by different numbers of electrons. However, an approach exists that gets around the above difficulties. This approach rests on the analysis of reduced density matrices (as a rule, these are the first-order and secondorder matrices) of a system as a whole, and the separation of a particular subsystem is generally based on some geometric criteria. This makes it possible to considerably simplify computations, but leads to some arbitrariness in the choice of the definitions for local characteristics of the electronic structure. This arbitrariness most clearly manifests itself in going beyond the scope of the HF approximation, as evidenced by a wide variety of definitions for molecular systems available in the literature for valences and bond orders in the case of post-Hartree– Fock methods for molecular systems [570,578–580]. In post-HF methods local characteristics of molecular electronic structure are usually defined in terms of the first-order density matrix and in this sense there is no conceptual difference between HF and postHF approaches [577]. It is convenient to introduce natural (molecular) spin orbitals (NSOs), i.e. those that diagonalise the one-particle density matrix. The first-order density matrix in the most general case represents some ensemble of one-electron states described by NSOs 2n  ρ= λi |ψi ψi | (9.14) i=1

where λi are the NSO occupation numbers so that

2n

i=1

λi = N, λi ≥ 0 for all i =

1, 2, . . . , 2n and the characteristic feature of the HF case is that exactly N weights λi in this expansion are equal to 1 (due to the normalization condition, the remaining (2n − N ) should be equal to 0). Here, N is the total number of electrons. In geometric terms, this property of the HF density matrix means that it is a projector on the subspace of occupied NSO or, equivalently, that the N -electron state is described by a single-determinant wavefunction. In any post-HF method, based on the wavefunction formalism, the coefficients in expansion (9.14) satisfy the representability conditions:

9.1 Theoretical Analysis of Chemical Bonding in Crystals

331

0 ≤ λi ≤ 1. Some of these coefficients can be close to 1 (strongly occupied NSO) and some close to 0 (weakly occupied NSO), but in any case the post-HF density matrix loses its property ρ2 = ρ. Turning to the basis of natural orbitals (NOs) results in the appearance of two spin components of the density matrix, ρα and ρβ . For RHF, ROHF, and UHF cases, these spin components are idempotent, being projectors on the subspace of the full MO space spanned by the occupied σ-MOs (σ = α, β). The density operator is the Hermitian positive-semidefinite operator with a spur equal to the number of electrons. At the same time, in general, this operator does not possess any other specific properties such as, for example, idempontency. After the convolution over the spin variables, the density operator breaks down into two components whose matrix representation in the basis set of atomic orbitals (AOs) has the form ρˆσ χµ =

n 

χν (P σ S)νµ

(9.15)

ν=1

where S is the AO overlap matrix, and the matrix elements of the P σ matrix are σ related to the occupation numbers and the coefficients Ciµ in the expansion of the spatial parts of natural spin orbitals in the AO basis set through the expressions σ = Pµν

n 



σ σ σ Ciµ λi (Cνi )

(9.16)

i=1

In principle, it is not difficult to define the σ-occupancy of the atomic subspace (subspace spanned by AOs of atom A). To this end it is sufficient to calculate NAσ = Sp [ˆ ρσ ρˆA ]

(9.17)

where ρˆA is the projector on the subspace of atom A. This value gives us a certain measure of immersion of atom A subspace into the subspace of σ-occupied NOs. Such a definition, however, is not satisfactory because due to the nonorthogonality of the AO basis the sum of occupancies will be greater than the total number of electrons. A reasonable approach consists of turning to the so-called biorthogonal basis χ ˜µ and introducing the atomic projector as  |χµ χ ˜µ | (9.18) ρˆA = µ∈A

˜µ = δµν . Operator (9.18) is idempotent and Hermitian. where χ ˜ = χS −1 and χµ |χ Let the atomic basis set be well localized on atoms (or the atomic fragments under consideration) and be orthonormal. The unit operator can be expanded as  Iˆ = ρˆA (9.19) A

This operator has a unit matrix with respect to the AO basis set and can be used as the right identity in manipulations in AO basis. In particular,  Sp ρˆσ ρˆA = N σ (9.20) Sp ρˆσ = A

332

9 LCAO Calculations of Perfect-crystal Properties

With such definitions, the total electron occupancy of atom A is calculated as   (P σ S)µµ (9.21) NA = NAα + NAβ = Sp ρˆσ ρˆA = σ

σ µ∈A

In order to determine the two-center bond order, it is reasonable to attempt to obtain the expansion similar to (9.20), but for the squares of the density-operator components. Unfortunately, in the general case, the spur of the density operator squared Sp(ˆ ρ2 ) = Sp(ˆ ρσ )2 depends on both the AO basis set and the computational techσ

nique and can be treated as a certain characteristic of a system only with the very large basis sets and full configuration interaction. Furthermore, even in this limiting case, the physical meaning of the given characteristic is not quite clear. However, instead of the σ-components of the density operator, it is possible to consider their combinations ρˆα+β = ρˆα + ρˆβ and ρˆα−β = ρˆα − ρˆβ that are referred to as the total electron and spin density operators, respectively, and to examine the contributions to the squares of these operators. Both approaches are consistent with each other and with the standard analysis within the Hartree–Fock approximation for occupied shells when one uses the expansion of the doubled sum of the density-operator σ-components squared     2 (P σ S)µν (P σ S)νµ (9.22) Sp ρˆσ ρˆA ρˆσ ρˆB = Sp (ˆ ρσ ) = σ

σ A,B µ∈ A ν∈B

σ A,B

The quantities WAB = 2

 

(P σ S)µν (P σ S)νµ

(9.23)

σ µ∈ A ν∈B

at B = A can be interpreted as certain characteristics of bond A − B order. Their sum  CA = WA (9.24) B =A

may be treated as the covalence of A atom. The one-center terms FA = WAA in (9.23) are termed the free (nonrealized) valence of atom A. The results obtained in post-HF methods for solids refer mainly to the energy of the ground state but do not provide the correlated density matrix. The latter is calculated for solids in the one-determinant approximation. The density matrix calculated for crystals in RHF or ROHF one-determinant methods describes the many-electron state with the fixed total spin (zero in RHF or defined by the maximal possible spin projection in ROHF). Meanwhile, the UHF one-determinant approximation formally corresponds to the mixture of many-electron states with the different total spin allowed for the fixed total spin projection. Therefore, one can expect that the UHF approach partly takes into account the electron correlation. In particular, of interest is the question to what extent UHF method may account for correlation effects on the chemical bonding in transition-metal oxides. An answer to this question can be obtained in the framework of the molecular-crystalline approach, proposed in [577] to evaluate the correlation corrections in the study of chemical bonding in crystals. Conceptually, the method is as follows. The local characteristics of a crystal electronic structure are calculated within the periodic model by the Hartree–Fock method

9.1 Theoretical Analysis of Chemical Bonding in Crystals

333

to choose the molecular cluster that adequately describes the local features of the electronic structure. In the majority of cases, the number of atoms comprising this cluster is appreciably less than the number of atoms contained in the clusters simulating one-electron states in a crystal. At the next stage of the advanced approach, the chosen cluster is calculated in the framework of the multiconfigurational approximation using the molecular programs providing the expansion of wavefunctions into determinants. Then, by applying the UHF method to the calculations of the cluster and the crystal, one can obtain the one-determinant solutions, which correspond to the generalized valence bonds. Simple rearrangements of the multiconfigurational cluster function permit one to explicitly separate the obtained valence bonds in its expansion. If these valence bonds turn out to be dominant in the expansion, then, in order to construct the many-electron function of a crystal, it is sufficient to replace the cluster valence bonds by the crystal valence bonds. Thus, the constructed wavefunction explicitly includes the electron-correlation effects. By convoluting the many-particle density matrix into two- and one-particle density matrices, it is possible to calculate the local characteristics of chemical bonding in a crystal by the known formulas. In Sect. 9.1.3 we discuss the results of such an approach for application to the Ti2 O3 crystal with the open-shell configuration d1 of the Ti3+ ion. It is common knowledge that the electron correlation can play an important role in compounds of transition metals with an unfilled d electronic shell. The density-functional method (LDA or GGA), which has been widely employed for these crystals, often appears to be unsatisfactory because of an incorrect description of the self-interaction, see Chap. 7. 9.1.2 Chemical Bonding in Cyclic-cluster Model: Local Properties of Composite Crystalline Oxides The above formalism for calculation of local electronic-structure characteristics of crystals was at first applied in the cyclic-cluster CNDO semiempirical calculations [571] of composite crystalline oxides with the metal atom oxidized to various degrees. In chemistry the oxidation state is a measure of the degree of oxidation of an atom in a chemical compound. It is the hypothetical charge that an atom would have if all bonds to atoms of different elements were 100% ionic. Metal oxidation states are positive and denoted by I, II, III for oxidation states one, two, three, respectively. It should be remembered that the oxidation state of an atom does not represent the “real” charge on that atom: this is particularly true of high oxidation states, where the ionization energies required to produce a multiply positive ion are far greater than the energies available in chemical reactions. The assignment of electrons between atoms in calculating an oxidation state is purely a formalism, albeit a useful one for the understanding of many chemical reactions. It was shown [306] that it is the full atomic valence (9.13) that correlates and in many cases is numerically close to the oxidation state. Usually, composite oxides of heavy-metal atoms crystallize in structures with low-symmetry space groups and contain many atoms in their unit cell. Due to the large atomic (or ionic) radii of the metallic atoms these compounds have both nontypical metal–oxygen bond lengths and atomic coordination numbers. As a rule, the constituent heavy-metal elements exhibit a different oxidation state. The

334

9 LCAO Calculations of Perfect-crystal Properties

variable valence of the metal atoms makes the formation of oxides with a different chemical compositions (simple, composite and miscellaneous oxides) possible. The simple oxides contain metal atoms with constant valence (for example, Cu2 O, La2 O3 etc.). However in miscellaneous oxides the metal atoms of the same chemical elements occur in the different oxidation states (for example, Fe3 O4 , Cu4 O3 ). The heavy-metal oxides may lose or acquire oxygen atoms forming a defective crystalline structure and nonstoichiometric compounds. Unlike light-metal oxides, the investigation of the electronic structure of crystalline heavy-metal oxides is a difficult task because of their composite crystal structure. Thus, it is necessary to use approximations both for the crystal-structure description and for the choice of one-electron Hamiltonian. It is necessary to investigate the electronic structure of defect-containing metal oxides to understand their physical and chemical properties. However, the first step of such an investigation is connected with the calculation of the electronic structure of perfect nondefective crystal. The analysis of ionic and covalent components of the chemical bonding in perfect crystal allows one to propose realistic models describing the defects in these compounds. The calculations of local properties of metal-oxide electronic structure [571, 581– 583] were made in the cyclic-cluster model, in the CNDO approximation. As in the CNDO approximation AOs are supposed to be orthogonalized by the L¨ owdin procedure (see Chap. 6), the definitions of local properties given in Sect. 9.1.1 for nonorthogonal basis, have to be modified. In particular, the overlap population (9.9) becomes zero in the CNDO approximation, so that the electronic population is defined only A0,A0 by diagonal density matrix elements Pµµ . In (9.6) and in the bond-order definition (9.11) the overlap matrix has to be replaced by an identity matrix. The matrix elements of the cyclic-cluster Hamiltonian are given by (6.61),(6.62) and depend on the semiempirical one-center parameters βM , Uµµ , γM M and two-center Coulomb integrals γM N . The one-center parameters for the light elements with s and p valence electrons have been taken from [584], where these parameters were calibrated for molecular calculations. The one-center parameters for copper, lead, nickel and lanthanum atoms were calibrated so that the results of the electronic-structure calculations correlate well with the experimental data for the simple oxides of these elements. The Coulomb integrals γM N were estimated from the one-center γM M and γN N Coulomb integrals using Ohno’s approximation [239]. The numerical values of the bonding parameters βM N are connected with the choice of the atomic basis functions. As the doubledzeta atomic functions of the neutral atoms were used the bonding parameters βM for the light elements were recalibrated as their values in [584] correspond to Slater single-dzeta atomic functions. The bonding parameter βM N was taken to be equal √ to βM M βN N as is done in many molecular calculations. The numerical values of CNDO parameters of atoms are given in Table 9.1. The details of their choice for actual atoms can be found in [571]. The crystal structures of the considered composite metal oxides are given in Table 9.2 (the references to the corresponding experimental data can be found in [571]). The calculated atomic charges and full atomic valencies are given in Table 9.3 for nonequivalent (not connected by the symmetry transformations) atoms, both with variable valence (Cu,Pb,Ni) and constant valence (oxygen and metal atoms Me in different oxidation states).

9.1 Theoretical Analysis of Chemical Bonding in Crystals

335

Table 9.1. CNDO semiempirical parameters of atoms used in crystalline metal oxides calculations (in eV) Element γM M Uss Li O K Cu Sr Y Ba La Pb Ni

3.47 13.63 3.70 17.20 3.75 8.50 4.20 7.30 4.30 17.00

Upp

Udd

βM

–4.99 –1.8 –101.31 –84.287 –17.0 –4.15 –1.8 –162.23 –171.46 –8.4,–14.6 –9.43 –1.8 –20.80 –22.80 –5.8 –10.30 –1.8 –15.08 –19.08 –5.0 –26.30 –21.500 –7.7 –140.90 –149.00 –5.0,–10.0

For comparison the crystallographic valencies in copper–oxide compounds, calculated for the experimental bond lengths, are given in brackets. The crystallographic valence (CV) of the ith atom in a crystal is defined as the sum  V)i = Bij (9.25) j

where the summation is performed over all the atoms with charge opposite in sign to that of the ith atom and Bij is the so-called bond valence of the ith and jth atoms. It has been found that in acid–base networks the bond valence Bij correlates well with the bond length Rij and can be approximated by the inverse power or logarithmic function, −N Bij = (Rij /R0 ) (9.26)   Rij − R0 (9.27) Bij = exp − B The fitted constants N, R0 and B depend only on the nature of the bonded atoms (i, j) and are given in the literature [585, 586] or may be calculated by the computer code VALENCE [587] designed to calculate bond valences from bond lengths and vice versa. This code allows also calculation of bond–valence sums and average bond lengths, and can determine bond–valence parameters from the bonding environments of different cations. The numerical values of parameters N, R0 and B are usually found by fitting the crystallographic valence V)i to the mean value of the stoichiometric atomic valence in the row of the simplest crystals containing the ith atom. One has to be careful in interpreting the bond-valence sums. The drawbacks of the CV definition are evident: 1. only the central part of the typical valence–bond length curve may be approximated by (9.26) and (9.27); 2. the real interaction between two atoms in a crystal depends not only on the interatomic distance between atoms, but also on the covalent or ionic character of the formed chemical bonding (in some cases this is taken into account by introducing

336

9 LCAO Calculations of Perfect-crystal Properties

Table 9.2. The crystal structure of metal oxides (Z is the number of formula units in the unit cell) Compound

Space group Z Cu,Pb,Ni Me

O

Cu2 O YCuO2 LaCuO2 CuO NiO Cu4 O3 Li2 CuO2 SrCuO2 Sr2 CuO3 MgCu2 O3 Y2 Cu2 O5 NaCuO2 KCuO2 LaCuO3 La2 O3 La2 CuO4 orth La2 NiO4 orth La2 CuO4 tetr La2 NiO4 tetr

P m3m R3m R3m C2/c R3m I41 /adm Immm Cmcm Immm P mmm P n21 a P1 Cmcm R3c P 3m1

2 3 3 4 3 4 2 4 2 2 4 1 4 6 3

2a 6c 6c

Cmca

4 4a

8f

8e,8f

I4/mmm

1 1a

2e

2c,2e

YBa2 Cu3 O6

P 4/mmm

1 1a,2g

YBa2 Cu3 O7

P mmm

1 1a,2q

α-PbO β-PbO α-PbO2 β-PbO2 Pb2 O3 Pb3 O4

P 4/mnm P bcm P bcn P 4/mnm P 21 /a P 42 /mbc

2 4 2 4 4 4

4b 3a 3a 4c 3a 8c,8d 2b 4c 2d 4e 4a,4a 1a 4c 6b

2c 4d 4c 2a 4e,4e 4d,8h

3b 3b 4e

3b 4a,8e 4j 4i 4c 4c,4c 4f 2a,4f 2a 2b,4e 4a,4a 4a,4a,4a,4a,4a 1h 2i 4c 8f 6a 18e 6d 3a,6d

Y:1d 4i,2g Ba:2h Y:1h 1e,2s,2r,2q Ba:2t 2a 4d 8d 4f 4e,4e,4e 8g,8h

additionally the dependence of the fitting parameters on the oxidation states of bonded atoms). Nevertheless, the crystallographic valence has a number of practical applications, in particular in the determination of crystal structures or identifying elements that cannot be distinguished by X-ray diffraction. The fiiting parameters values for CV given in Table 9.3 were taken from [588]. It can be seen that the CVs of atoms correlate on the whole with their full atomic valence V and oxidation state in the compounds considered. However, the dispersion of CV values is large for an atom with the same oxidation state in different crystals. For example, the CV of the oxygen atom appears to be in the interval 1.5 to 2.6. The CV approach was used by some authors to find the copper oxidation states in high-temperature superconductors [585]. However, as a rule, these compounds have

9.1 Theoretical Analysis of Chemical Bonding in Crystals Table 9.3. Atomic charges and full atomic valencies in crystalline metal oxides* Crystal

Atomic charges Cu, Pb, Ni O1 O2

Me

Cu2 O

0.97

–1.94

YCuO2 LaCuO2

0.99 0.97

–1.59 –1.73

CuO

1.60

–1.60

NiO Cu4 O3

1.87 0.96 1.57

–1.87 –1.72

Li2 CuO2

1.43

–1.71

0.99

SrCuO2

1.43

–1.60

–1.74 1.90

Sr2 CuO3

1.38

–1.84

1.99

MgCu2 O3 Y2 Cu2 O5

1.31 1.59 1.67

1.98 –1.32 1.68 –1.32 1.67

NaCuO2

1.89

–1.49 –1.20 –1.58 –1.18 –1.44

KCuO2

2.08

–1.54

0.99

LaCuO3

2.19

–1.54

2.45

La2 O3 La2 CuO4 orth 1.56

–1.68, –1.60 –1.52,–1.54

2.43 2.28

La2 NiO4 orth 1.86 La2 CuO4 tetr 1.70

–1.76,–1.65 –1.61,–1.63

2.45 2.39

La2 NiO4 tetr 1.88 YBa2 Cu3 O6 Cu–O chains 0.97 Cu–O planes 1.57

–1.65

YBa2 Cu3 O7 Cu–O chains

–1.78,–1.64

2.04

Cu–O planes 1.52

Full atomic valencies Cu, Pb, Ni O1 O2 Me

–1.76,–1.67

2.48

2.18 (2.38) 2.01 2.38 (2.45) 2.01

2.00 (2.58) 2.03 2.01 (2.16) 2.01 (2.04) 2.00 2.00 (2.15) 1.99 (1.99) 1.99 (2.08) 1.99 (1.82) 2.01 2.09 2.02 2.10 2.01 (1.91) 2.00 (1.73) 2.02 (1.90) 2.01 2.00 (2.19) 2.00 2.01 (2.28) 2.00

–1.97

Y:2.44 1.00 (1.42) 2.12 (2.12)

2.00 (1.94) 2.01 (2.13)

3.03 (2.89)

Y:2.44 2.66 (2.21) –1.74,–1.51 2.06 (2.13) to be continued

1.99 (1.87) 2.01 (2.03)

1.97 3.03 (2.00) (2.80) 1.99 (2.03)

2.18 2.49

–1.56

0.99

1.03 (1.29) 1.08 1.02 (1.25) 2.18 (2.04) 2.00 1.02 2.11 (1.25) (1.99) 1.92 (1.84) 1.98 (2.01) 1.81 (1.90) 1.72 2.25 2.29

2.56 (2.52) 2.73 (2.50) 2.82 (2.96)

3.06 3.03 (3.07)

2.01 (2.17) 1.00 2.00 (1.80) 1.97 (2.16) 1.98 2.06 2.06

1.99 (1.87) 2.00 (1.96) 2.00 3.13 3.14

1.00 (1.29) 1.00 (0.95) 3.02 (2.75) 2.03 3.03 1.98 3.01 (1.67) (2.67) 3.00 1.98 3.00 (1.46) (2.52) 3.00

337

338

9 LCAO Calculations of Perfect-crystal Properties Crystal α -PbO β -PbO α -PbO2 β -PbO2 Pb2 O3

Atomic charges Cu, Pb, Ni O1 O2 0.91 0.88 2.78 2.80 0.94 2.80

Me

–0.91 –0.88 –1.39 –1.40 –1.11,–1.24 –1.38 Pb3 O4 0.74 3.09 –1.05,–1.24 ∗ Cu, Pb, Ni – atoms with variable valence; oxygen constant valence; crystallographic atomic valencies

Full atomic valencies Cu, Pb, Ni O1 O2 Me 2.38 2.41 3.95 3.95 2.32

2.21 2.21 2.04 2.05 3.94 2.11 2.07 2.06 2.34 3.97 2.10 2.09 and Me (I,II,III) – atoms with are given in brackets.

nonstoichiometric composition, which introduces some uncertainty into their crystalstructure interpretation. The experimental Cu–O distance in the orthorhombic modification of La2 CuO4 , see Fig. 2.13, is larger than in the tetragonal one. The corresponding CV of copper is less in the orthorhombic modification. This tendency is reproduced by the calculated full valence values. However, in both La2 CuO4 modifications the copper CV values are larger than two (stoichiometric value) while the full valences are closer to this value. The crystal valence of copper atoms also changes when the oxygen vacancies concentrate on the 01 site (oxygen in chains) in YBa2 Cu3 O7 , (see Fig. 2.15), and change the composition to YBa2 Cu3 O6 , and symmetry from orthorhombic to tetragonal. In YBa2 Cu3 O7 both Cul copper atoms in chains and Cu2 copper atoms in planes have CV values larger than that in CuO crystal (see Table 9.3) and the CV of the Cul atom is somewhat larger. The absence of oxygens on the Ol site destroys the chain structure of Cul atoms that become linearly coordinated by two oxygen atoms in YBa2 Cu3 O6 , and have a CV value close to that of Cu I copper. The five-coordinated Cu2 atom has a crystal valence close to that of Cu II (see Table 9.3). The calculation of not only the full valencies but also other local properties of electronic structure gives more detailed information about the chemical bonding in crystals of metal oxides. As is seen from Table 9.3, the copper atomic charge QCu is close to +1 in the Cu I oxide compounds. This means that the Cu I–O bonding is essentially ionic. The calculated 4s population of copper atoms appears to be near zero so that the copper atomic configuration in Cu I oxide crystals is close to 3d10 . The results for Cu IIcontaining copper oxide compounds indicate that Cu II–O bonding is more covalent compared to Cu I–O bonding; the copper atomic charge in Cu II oxide compounds lies between 1.38 and 1.70 so that the copper atomic configuration appears to be between 3d9.6 and 3d9.3 . The Cu III atomic charge is close to +2 (see Table 9.3); calculated atomic populations correspond to a 3d9 configuration. Thus, there are no Cu3+ ions in cuprates, although these compounds do contain Cu III atoms, which lose two electrons to form an ionic bond with oxygen and supply one electron to form the covalent bonds. Calculated atomic charges on alkali and alkali-earth metal atoms (Me) are close to the number of their valence electrons, so that these metal atoms are present as Me+ and Me2+ ions, respectively. As shown in Table 9.3 the calculated charge of the rare-earth atoms Y and La are close to +3.

9.1 Theoretical Analysis of Chemical Bonding in Crystals

339

In Table 9.3 the results suggest that the absolute value of the atomic charge in plumbic oxides PbO2 are larger than those in plumbous oxides PbO. However, all the lead–oxygen crystals are very far from purely ionic compounds. The nonequivalent metal atoms in the miscellaneous oxides Cu4 O3 , Pb2 O3 , Pb3 O4 have different atomic charges, and the charge values are close to those in either higher (CuO, PbO2 ) or lower (Cu2 O, PbO) oxides. We see that the calculated atomic-charge values agree qualitatively with those expected from the chemical point of view. On the other hand, the electronic-charge distribution calculated by other approaches (more traditional for solid-state physics) appears to be unrealistic: for example, it was found in an LAPW calculation of the Cu2 O crystal [589] that the atomic charges (estimated by the density integration inside the atomic spheres) are positive for both atoms: QCu = 2.05 and QO = 0.40. LCAO calculations of the electron density and direct integration over a spherical region near atomic cores [590] also do not allow one to distinguish the atomic charges on atoms with different oxidation states (the numerical values for the copper atomic charge in Cu2 O and CuO crystals are practically the same :+0.58 and +0.48, respectively). These examples demonstrate the advantage of quantum-chemical LCAO calculations of the local electronic-structure properties to describe reasonably both the valence and charge states of metal atoms in crystals. This conclusion is important for the study of new complicated crystalline structures, synthesized experimentally. As an example, we refer to the high-Tc superconductors. It is well known that a small variation of the composition or the way in which the material is prepared may essentially change the superconducting properties. Evidently this is connected with a change of the electronic structure of the superconductor. In [582] the comparative theoretical analysis of chemical bonding was made in two pairs of copper oxide compounds : (a) orthorhombic and tetragonal modifications of La2 CuO4 (the latter modification has a structure similar to that of the superconductor La2−x , Srx CuO4 ) and (b) nonsuperconducting tetragonal YBa2 Cu3 O6 and superconducting orthorhombic YBa2 Cu3 O7 crystals. In accordance with the results of previous band-structure calculation, it was found that La2 CuO4 , and YBa2 Cu3 O7 are metallic with small values of the density of states at the Fermi level, but YBa2 Cu3 O6 is a semiconductor with a forbidden energy gap of 2.5 eV. It was also found that the density of states for the YBa2 Cu3 O7 crystal contains 3d Cu I (copper in chains) peak around 13 eV below Fermi level, but in the case of YBa2 Cu3 O6 this peak was absent. An analysis of chemical bonding in high-Tc superconductors and related nonsuperconductor crystals shows changes that take place in the local electronic structure of these substances. As seen in Table 9.3 the charge distribution around the copper atom in the orthorhombic modification of the La2 CuO4 crystal is practically the same as in the CuO crystal. Contrary to this, in the tetragonal modification of La2 CuO4 the copper atomic valence exceeds the ordinary Cu II valence in copper oxide compounds. The calculated atomic charge on the copper atoms in La2 CuO4 crystals correlates well with that from it ab-initio Hartree–Fock cluster calculation (1.79e) [591]. If we consider the following defect-formation process, the substitution of La III by Sr II atoms, or the addition of oxygen atoms (for example, La2 CuO4.13 compound exists) it still further increases the copper valence in La2 CuO4 . A comparison of the atomic charges and bond orders in YBa2 Cu3 O6 and YBa2 Cu3 O7 crystals shows that electron-density distributions are practically identical in Cu–O planes, see Table 9.3.

340

9 LCAO Calculations of Perfect-crystal Properties

The main changes in the chemical bonding take place in Cu–O chains. The results in Table 9.3 show that the charge state of Cu I atoms (in Cu–O chains) in YBa2 Cu3 O6 crystal is close to the state of copper atoms in Cu I oxides, but that in YBa2 Cu3 O7 they are close to copper atoms in Cu III oxides. The analysis of calculated bond orders shows that there is no peroxide bonding in copper oxygen superconducting materials. It was also shown by atom–atom potential modeling that even additional oxygen atoms in La2 CuO4+x do not cause the formation of peroxide bonds. One of the questions to be considered is the role of the tetragonal–orthorhombic transition in superconductor materials. To analyze the changes in the electronic structure that are connected with the tetragonal–orthorhombic transition the YBa2 Cu3 O7 crystal with an oxygen vacancy was considered. The composition of this phase is YBa2 Cu3 O6 , but the lattice parameters and space symmetry are the same as those in the YBa2 Cu3 O7 crystal. It was found [571] that differences in atomic charges between perfect YBa2 Cu3 O6 and orthorhombic YBa2 Cu3 O6 do not exceed 0.05. These results show the strong correlation between Cu III (though not Cu3+ ) atoms presence and high-Tc superconductivity in copper oxides. The correlating bonding and structure in Cu II and Ni II mixed oxides is a matter of high interest. The comparative study of the chemical bonding in NiO–CuO and La2 NiO4 –La2 CuO4 crystals was made in [582, 583]. NiO crystals were calculated in rhombohedral structure, corresponding to nonmetallic antiferromagenetic phase of this crystal. Analysis of local properties of electronic structure of crystals containing a Ni II–O bond with those containing Cu II–O bond, allows us to conclude that the former is more ionic than the latter (see Table 9.3). The increase of ionicity degree in the Ni II–O bonding with respect to Cu II–O bonding is understood in terms of the mutual position of the oxygen 2p and metal 3d subbands that lie nearly in the same energy interval for Cu, whereas the 3d Ni subband lies approximatively 2 eV above the center of gravity of the oxygen 2p level. The ionic part of the Ni II–O bonding is the same for NiO and La2 NiO4 (see Table 9.3). As regards the Cu II–O bonding, the data obtained for La2 CuO4 as compared to CuO and other Cu II mixed oxides such as Sr2 CuO3 , Sr2 CuO2 , Li2 CuO2 , atomic charges that are found in the range 1.4 to 1.6, point to a rather high ionic part of the Cu II–O bonding. Comparing the full atomic valence for Ni II and Cu II (Table 9.3) evidences a striking feature: the quantum-chemical value of the valence fits perfectly the formal oxidation state of Ni, namely (II), whereas for Cu, the quantumchemical valence is larger than the oxidation state, with an enhancement for La2 CuO4 , (VCu = 2.38). Such a data is likely to depend on an increase of the covalence of the Cu II–O bonding, as compared to the corresponding Ni II–O bonding. As regards the problem of the true meaning of the (II) valence in tetragonal La2 NiO4 , quantum-chemical data cannot be considered as contradictory to the occurrence of some Ni II–Ni III oxidation coupled with the presence of interstitial oxygen, which is rather usual for air-prepared polycrystalline La2 NiO4 . From the data of Table 9.3, one can get an insight into the anisotropy of the M II–O bonding in La2 MO4 , i.e. the electronic anisotropy in the MO6 octahedra (see Fig. 2.13), in terms of the two following features: (i) The Ni II–O bonding in La2 NiO4 does not exhibit any significant anisotropic trend: the covalence is rather low and equally distributed in the equatorial plane and

9.1 Theoretical Analysis of Chemical Bonding in Crystals

341

the apical direction. Consequently, the nature of the Ni II–O bonding in the N iO6 octahedra is nearly unchanged when going from the binary oxide NiO to the composite oxide La2 NiO4 . (ii) The increase of the covalent bond order of the Cu II–O bonding, as compared to the Ni II–O one, concerns the Cu II–O inplane bonds: such Cu–O equatorial bonds are very similar to the Cu II–O bonding in the binary oxide CuO. Conversely, the Cu–O apical bonds are slightly covalent and look like the corresponding Ni–O apical bonds in the NiO6 octahedra of La2 NiO4 and NiO, as well. The strong ionic character of the Cu–O apical bonds in La2 CuO4 results in an unusual overall increase of the atomic charge of Cu (Table 9.3), when compared to CuO and other Cu II mixed oxides. The absence of any significant anisotropic covalent effect of the Ni–O bonding in La2 NiO4 found in calculations, fully agrees with the conclusions of magnetization density studies, which point to an equal population of dx2 −y2 and dz2 orbitals and no significant covalence in the M–O plane [592]. Moreover, as also stated in [592], the covalent effect to be found in the apical direction of the octahedra is likely to be due not to Ni II but to La III, in terms of a “hybridization between the La 5d and O 2p bands”. This is consistent with the lowering of the atomic charge of the apical oxygen, as compared to the equatorial one, modeled in La2 NiO4 (Table 9.3); such a lowering cannot depend on an increase of the covalent effect of the Ni II–O bonding in the apical direction, but more likely it can be ascribed to the covalent character of the La III–O bonding (Table 9.3). From the main differences in the Ni II–O and Cu II–O bonding emphasized above, it is possible to clear up the problem of the actual nature of the anisotropic effects in the Ni II and Cu II octahedral oxygen coordination in La2 MO4 oxides (M = Cu, Ni), namely to appreciate the mutual electronic and geometric or steric contributions. In this respect, Ni II and Cu II behave in a completely different way: (i) The electronic contribution to the overall anisotropy of the NiO6 octahedra in La2 NiO4 is nearly absent (4Ni − Oeq : 1.934 ˚ A, 2Ni − Oap : 2.243 ˚ A) [593]). This means that the tetragonal distortion of the NiO6 octahedra largely depends on steric effects originating in the impossibility to match properly the usual La–O and Ni–O bond lengths: 2.57 and 2.06 ˚ A, respectively, when building the structure of La2 NiO4 , as proposed in [594]. (ii) The electronic contribution of Cu II in terms of a significant covalent effect of the Cu II–O inplane bonding, results in a cooperative shortening/lengthening of the Cu − Oeq and Cu − Oap , bonds, respectively: 4 Cu − Oeq : 1.904 ˚ A, 2 Cu − Oap : 2.397 ˚ A. The enhancement of the tetragonal distortion of the CuO6 octahedra results from adding the electronic contribution of Cu II to the typical steric effect of the La2 CuO4 . Finally, the quantum-chemical data, as used to compare the anisotropy of the M II–O bonding in the M II octahedral oxygen coordination of La2 MO4 oxides (M = Ni, Cu), allow the following two features to be emphasized: (i) The so–called Jahn–Teller effect of the d9 Cu II must be understood in terms of an anisotropy of bonding, namely a strong covalent character of the Cu II–O inplane bonding that no longer exists in the Cu II–O apical bonding. Such an anisotropic covalent bonding character cannot be found in the high-spin d8 Ni II: as a consequence, the occurrence of a distortion of the NiO6 octahedra is related to the steric effects of the geometric structure in question: the rocksalt structure of NiO permits only a very

342

9 LCAO Calculations of Perfect-crystal Properties

slight distortion of the octahedra, as the structure of La2 NiO4 results in significant steric constraints on the octahedra. (ii) The overall anisotropy of the MO6 octahedra in the La2 MO4 oxides (M = Ni, Cu) cannot be fully understood in terms of the typical M II–O bonding properties. The role of La III–O bonding can be held as crucial in enhancing the covalent character of the apical oxygen and consequently increasing the tetragonal distortion of the MO6 octahedra. This is clear from the data obtained for La2 NiO4 . Thus, anisotropy of the NiO6 octahedra can be assumed to originate from geometric contributions. Conversely, the anisotropy of the Cu II–O bonding, in terms of a significant covalency of the Cu II–O inplane bonding, is unambiguously settled. More generally, each increase of the covalency effect of inplane bonding in MO6 octahedra, results in a corresponding lengthening of the apical M–O bonding. Such an effect, which was previously well evidenced for the anisotropic electronic configurations of some so-called exotic cations such as low-spin Ni3+ or low-spin Cu3+ is presently being investigated in Ni I–O and Cu I –O bonding of the structures of the reduced phases LaNiO2 and LaSrNiO3 [595]. The use of local electronic-structure properties conception in the chemical-bonding analysis was demonstrated also in ab-initio calculations of crystalline metal oxides, discussed in the next section using the example of titanium oxides. 9.1.3 Chemical Bonding in Titanium Oxides: Periodic and Molecular-crystalline Approaches As demonstrated above by the results of semiempirical calculations of metal oxides, the full valence of the metal atom, defined according to (9.13), correlates with the metal oxidation state. Such a conclusion was confirmed later in ab-initio HF calculations [574] of titanium oxides. Although the quadrivalent state (oxidation state IV) of the titanium atom is the most stable, the existence of oxygen compounds of titanium in formal oxidation states of III and II, as well as of a series of nonstoichiometric compounds was established. Table 9.4 presents the space-group symbol, the number of formula units in the cell, and the shortest Ti–Ti and Ti–O experimental distances for TiO in hexagonal structure, Ti2 O3 in corundum structure and TiO2 (in the rutile (r), anatase (a), and brookite (b) modifications). Table 9.4. Crystal structure of titanium oxides: space group, number of formula units per cell Z, and nearest interatomic distances (in ˚ A) Structure TiO(hex) Ti2 O3 data Group Z RTi−Ti RTi−O

P 6m2 2 3.03 3.24 2.38 3.86

TiO2 (r)

TiO2 (a) TiO2 (b)

R3c P 42 /mnm I41 /amd 2 2 2 2.58 3.00 3.10 2.99 3.55 3.76 2.02 1.95 1.94 2.07 1.97 1.99

P bca 8 2.95 3.06 1.86 1.92

9.1 Theoretical Analysis of Chemical Bonding in Crystals

343

The titanium oxides are of considerable technological interest, so different theoretical studies of electronic and atomic structure and properties have been performed both for TiO2 [100,323,596,597] and Ti2 O3 [598,599] crystals. We are not aware of the existence of the electronic-structure calculations of TiO. The available publications focus attention primarily on description of the band structure and phase stability of titanium oxides and restrict the discussion of the nature of chemical bonding in these compounds to an analysis of Mulliken atomic charges and overlap populations. The chemical bonding in titanium oxides was studied in more detail in [574, 575, 577, 600]. The calculations are made by HF-LCAO and DFT-LCAO methods, incorporated in the computer code CRYSTAL [23]. The core electrons of Ti and O atoms are described by Durand–Barthelat [484] pseudopotentials and the atomic basis sets were taken from [323], where the outer exponents of the Gaussians were fitted to reproduce the parameters of rutile structure. For the structural parameters those calculated in [323, 598] were taken. The sufficiently good accuracy of the calculations was ensured by the following choice of input computational parameters: 1. The goodquality set of the threshold parameters controlling the accuracy of the bielectronic series in RHF and UHF calculations (10−6 , 10−6 , 10−6 , 10−6 , 10−12 ). 2. The reasonably accurate tolerances controlling the DFT calculations of density, potential, and grid weight (10−9 , 10−9 , 10−14 ). 3. The values 10−6 and 10−5 a.u. for the convergence thresholds of eigenvalues and total energy, respectively. 4. For the sampling k-point net of the integration in the reciprocal space Monkhorst–Pack set with shrinking factors s1 = s2 = s3 = 6 was used. Table 9.5 presents local electronic-structure characteristics of the titanium oxides obtained by the RHF method, namely, the Ti d-orbital populations Pd and atom charges QTi , as well as the atomic valences VA . Also given are the local characteristics calculated in a nonorthogonal atomic basis and a basis orthogonalized according to L¨ owdin. As follows from a comparison of the results obtained from population analyses by Mulliken and L¨ owdin, the L¨owdin analysis shows the chemical bonding in the crystals under study to be largely covalent, with the total valences of the titanium and oxygen atoms differing substantially from the expected stoichiometric values. Table 9.5. Local electronic-structure characteristics of titanium oxides in the restricted Hartree–Fock method Crystal Pd TiO(hex) 2.38 1.82 Ti2 O3 TiO2 (r) 1.46 TiO2 (a) 1.47 TiO2 (b) 1.49

Mulliken QTi VTi 1.62 2.14 2.26 3.61 2.66 3.94 2.65 3.98 2.63 3.97

VO 2.04 2.05 2.08 2.08 2.09

Pd 2.70 2.50 2.18 2.19 2.21

L¨ owdin QTi VTi 1.27 2.30 1.43 3.98 1.73 4.18 1.72 4.23 1.70 4.23

VO 2.15 2.30 2.36 2.36 2.38

It was shown [602] that the calculations made using a valence-atomic basis without polarizing functions in the L¨ owdin population analysis agree better with the expected values of atomic valencies. The population analysis by Mulliken made in a nonorthogonal basis was found to be less sensitive to the inclusion of polarizing functions into the

344

9 LCAO Calculations of Perfect-crystal Properties

calculation. The results obtained with the restricted and unrestricted HF methods for TiO2 in formal titanium configuration d0 do not differ practically from one another. The results of a calculation of the local properties of the three TiO2 modifications show them to be only weakly sensitive to structural changes. Table 9.6. Local properties of chemical bonding in titanium oxide crystals in the restricted and unrestricted HF methods: titanium d-orbital populations Pd , atomic charges QA , covalencies CA , atomic valences VA , and bond-orders WAB for nearest-neighbor atoms* Local TiO (hex) properties Pd QTi CTi VTi QO CO VO WTi−Ti WTi−O

RHF 2.38 1.63 0.90 2.14 –1.63 0.74 2.04 0.03 0.00 0.11 0.00

UHF 2.34 1.67 0.69 2.05 –1.67 0.66 2.03 0.01 0.00 0.10 0.00

Ti2 O3 RHF 1.82 2.26 2.19 3.61 –1.51 0.94 2.05 0.89 0.00 0.20 0.21

UHF 1.77 2.32 1.23 3.01 –1.55 0.88 2.05 0.03 0.01 0.19 0.19

TiO2 (r) RHF 1.46 2.66 2.15 3.94 –1.33 1.24 2.08 0.01 0.01 0.36 0.30

*For the TiO2 crystal, the RHF and UHF results coincide.

As seen from Table 9.6 the largest difference between the calculations made in the RHF and UHF approximations was found for Ti2 O3 in corundum structure, see Fig. 2.19, with a formal titanium atom configuration d1 , where one can expect substantial spin-polarization and correlation effects. In the Ti2 O3 case the RHF method predicts a high bond order between titanium atoms, which, in its turn, results in an overestimated titanium valence. This pattern of chemical bonding is not borne out by experiments. As follows from Table 9.6, an increase in the degree of Ti oxidation from II to IV gives rise to an increase in the charge on the titanium atom, but the relative ionicity and the absolute value of the charge on the oxygen atom decrease. UHF calculations show that, in all the above insulator oxygen compounds of titanium, there is no strong covalent interaction among the Ti atoms. An appreciable role in transition-metal compounds is played by electron-correlation effects, which may be taken into account in periodic DFT calculations or within the framework of multiconfigurational methods employing the cluster model of the crystal. In particular, of interest is the question to what extent the single-determinant UHF method (applied in the periodic LCAO calculations of solids) may account for the correlation effects. In the general case only a qualitative answer to this question is possible. The comparison of the whole set of local properties for rutile TiO2 and corundum Ti2 O3 structures as seen from results of calculations [575, 577, 600] demonstrates the different role of correlation effects on the chemical bonding in these two solids. In Tables 9.7 and 9.8 results are given for RHF, UHF, KS (Kohn–Sham Hamil-

9.1 Theoretical Analysis of Chemical Bonding in Crystals

345

tonian with BLYP exchange-correlation functional – nonspin-polarized) and KSS (the same KS Hamiltonian with inclusion of spin polarization). Also given are results for hybrid spinless and spin-dependent schemes using HF exchange and LYP correlation in the Hamiltonian (HB and HBS, respectively). As follows from the results of the calculations, the effects of electronic correlation on local properties of the electronic structure of two crystals under consideration have both similarities and differences. Their explanation can be given if the peculiarities of the structure are taken into account. In both crystals the essentially covalent Ti– Table 9.7. DFT and HF results for rutile TiO2 crystal (Mulliken population analysis) Method RHF UHF SZ = 0 SZ = 1 KS (BLYP)

E (a.u.) QA CA VA WTi−O1 WTi−O2 –69.776 2.66 2.15 3.94 0.36 0.30 –1.33 1.24 2.08 –69.776 2.66 –1.33 –69.491 2.80 –1.40 –71.348 1.88 –0.94

KSS (BLYP) SZ = 0 –71.351 1.88 –0.94 –71.481 2.24 SZ = 1 –1.12 HB (LYP) –70.834 2.64 –1.32 HBS (LYP) SZ = 0 –70.834 2.64 –1.32 –70.554 2.80 SZ = 1 –1.40

2.15 1.24 1.99 1.11 3.18 1.85

3.94 2.08 3.97 2.07 4.06 2.25

0.36

0.30

0.32

0.26

0.50

0.43

3.18 1.85 2.73 1.60 2.17 1.25

4.06 2.24 3.99 2.17 3.94 2.09

0.50

0.43

0.43

0.39

0.36

0.30

2.17 1.25 1.99 1.11

3.94 2.09 3.97 2.07

0.36

0.30

0.32

0.27

O interaction takes place as the two spheres of the Ti atom’s nearest neighbors are formed by oxygen atoms: 1. In TiO2 the Ti atom is surrounded by four oxygens at 1.95 ˚ A and the next two oxygens at 1.97 ˚ A i.e. oxygens form a distorted octahedron, see Fig. 2.11. 2. In Ti2 O3 crystal six oxygens are grouped into two triangles (with close Ti-O distance 2.02 and 2.07 ˚ A, respectively), see Fig. 9.1. The Ti–Ti atoms’ configuration in two crystals is different: 1. In TiO2 crystal there are two Ti atoms at distance 2.99 ˚ A as a third neighbor of the Ti atom. In Ti2 O3 crystal each Ti atom interacts with only one Ti atom at the distance 2.58 ˚ A, being smaller than that in TiO2 crystal. The results, given in Tables 9.7 and 9.8, may be explained when only the three first neighbors of the Ti atom are considered (from the analysis of calculated bond orders, it follows that the interactions with more distant atoms are sufficiently weak). From Tables 9.7 and 9.8 it is seen that both HF and KS calculations demonstrate the essential role of covalence in both crystals due to Ti–O interactions. When comparing atomic charges QTi for the same calculational scheme, one finds that the Ti–O bonding

346

9 LCAO Calculations of Perfect-crystal Properties

Table 9.8. DFT and HF results for Ti2 O3 crystal in corundum structure (Mulliken population analysis) Method RHF UHF SZ = 0

E (a.u.) QA CA VA WTi−Ti WTi−O1 WTi−O2 -108.029 2.26 2.20 3.61 0.87 0.20 0.21 –1.51 0.94 2.05

–108.362 2.32 –1.54 SZ = 1 –107.902 2.24 –1.49 KS (BLYP) –110.682 1.65 –1.10 KSS (BLYP) SZ = 0 –110.702 1.69 –1.13 SZ = 1 –110.744 1.68 –1.12 HB (LYP) –109.672 2.24 –1.50 HBS (LYP) SZ = 0 –110.027 2.31 –1.54 –109.588 2.24 SZ = 1 –1.49

1.23 0.88 2.37 0.96 3.47 1.63

3.01 2.05 3.72 2.05 4.13 2.18

0.03

0.19

0.19

0.49

0.20

0.20

0.34

0.35

0.30

3.11 1.60 3.04 1.56 2.22 0.96

3.85 2.18 3.79 2.15 3.61 2.05

0.10

0.33

0.30

0.19

0.33

0.28

0.86

0.20

0.21

1.25 0.90 2.41 0.97

3.01 2.05 3.74 2.05

0.03

0.19

0.20

0.51

0.20

0.20

in TiO2 crystal is partly more ionic. For TiO2 crystal the Ti–Ti interaction is weak (the corresponding bond orders WTi−Ti are in the range of values 0.01–0.02 for all calculation schemes and are not given in Table 9.7). For Ti2 O3 crystal the results of calculations depend on the spin correlation: 1. In the RHF method bond order WTi−Ti appears to be large (0.87) and does not practically change in hybrid HF-KS calculations (HB) without spin; 2. For spin projection Sz = 0 (antiferromagnetic case), WTi−Ti is close to zero in UHF, KSS, and HBS calculations, which means that spincorrelation effects are mainly important when the Ti–Ti interaction is considered; 3. For spin projection Sz = 1 (ferromagnetic case), not only spin correlation but also the Coulomb one influences WTi−Ti : UHF value WTi−Ti = 0.49 decreases to WTi−Ti = 0.19 in KSS calculation. It is seen also that in UHF and Becke exchange Hamiltonians spin correlation is described in a different manner: the WTi−Ti value decreases from 0.49 (UHF) to 0.19 (KSS). Analyzing the total energy E per unit cell, one can draw interesting conclusions from Tables 9.7 and 9.8. In TiO2 crystal: 1. Spin-correlation effects are small for Sz = 0 (antiferromagnetic ordering practically does not change E, as seen from a comparison of the RHF-UHF, KS-KSS, and HB-HBS results). 2. The energy of the ferromagnetic state (Sz = 1) is higher than for the antiferromagnetic state (Sz = 0) for UHF and HBS calculations. It again shows the difference between HF and Becke approximations for exchange. This difference is due to the nonlocal exchange in the HF Hamiltonian (the one-electron

9.1 Theoretical Analysis of Chemical Bonding in Crystals

347

Fig. 9.1. Geometric structure of [Ti2 O12− ] cluster, modeling Ti2 O3 crystal in corundum 9 structure

density matrix offdiagonal elements are not taken into account in DFT approximation for exchange). In Ti2 O3 crystal the same difference in the total energy for Sz = 0 and Sz = 1 cases was found: In HF and HBS calculations, antiferromagnetic ordering gives an energy gain compared with the diamagnetic picture (compare in Table 9.8 the total energy for Sz = 0 and Sz = 1 in UHF and HBS calculations); however, Becke exchange gives the opposite order of the total energies (compare Sz = 0 and Sz = 1 for KSS calculations). As for covalencies of oxygen atoms and WTi−O , one can draw from Tables 9.7 and 9.8 the following conclusions: 1. Only spin correlation of Ti atoms gives small changes for these properties of electronic structure in both crystals (compare in Tables 9.7 and 9.8 RHF-UHF, KS-KSS, and HB-HBS results). 2. Inclusion of Coulomb correlation with Becke exchange gives a more covalent picture of chemical bonding (compare the results for RHF and KS calculations), but only the correlation correction gives small changes of the covalence of chemical bonding (compare the results for RHF and HB calculations). As was demonstrated in [571], the full valence of the metal atom, calculated for different metal oxides according to definition (9.13), correlates with the oxidation state in the semiempirical calculations, implicitly taking into account the correlation effects (see Chap. 6). In TiO2 and Ti2 O3 crystals the Ti atom oxidation state should be +4 and +3, respectively. The calculated total valence VTi is close to oxidation state 4 for all calculations of TiO2 (see Table 9.7) but strongly depends on the spin-correlation description for Ti2 O3 (see Table 9.8). The calculated total valence VO appears to be close to a reasonable value, 2.0, in all cases.

348

9 LCAO Calculations of Perfect-crystal Properties

For rutile TiO2 the LCAO results for Mulliken charges and the Ti–O overlap population can be compared with those found in DFT-PW calculations [601] after projecting the eigenstates onto a localized basis set of atomic pseudo-orbitals. In KSLCAO calculations, QTi = 1.88 and overlap populations of Ti–O bonds are 0.11 and 0.10 for nearest and next-nearest oxygens, respectively. In PW calculations [20], QTi = 1.46, and the overlap populations are 0.35 and 0.43, respectively. This comparison shows that the calculated local properties’ numerical values depend on the choice of basis set used in calculations (LCAO or PW sets). Moreover, in PW calculations the procedure of projection is used to receive atomic orbitals (see Sect. 9.1.5), which is not necessary in LCAO calculations. From the discussion of the results obtained it follows that the spin-correlation effects are described in an essentially different manner in HF and DFT calculations for Ti2 O3 crystal and as a result give different descriptions of Ti–Ti interaction: in the HF method, this interaction is weak (for energetically more favorable antiferromagnetic ordering); in the DFT method, the ferromagnetic ordering appears to be more favorable and Ti–Ti interaction remains essential. It seems reasonable to use post-HF descriptions of spin-correlation effects other than that used in HF and DFT methods. For this, one can perform, say, UHF and CASSCF electronic-structure calculations of reasonably selected clusters of the crystal under consideration to get single-determinant UHF and multiconfigurational CASSCF wavefunctions. Then, expanding UHF β-MOs over an α set and inserting these expansions in the UHF determinant, we obtain a certain multiconfigurational wavefunction that is, in general, a mixture of different spin states. Annihilation of the highest-spin contaminants leads to the multiconfigurational wavefunction that should be compared with the CASSCF one. If these functions are similar, that is, in both functions the same determinants are dominating, then one can state that the UHF method accounts for part of the Coulomb-correlation effects. Estimation of relevant energies may give an impression of what part of the correlation energy (in comparison with the CASSCF method) is obtained on the UHF level. Then, all qualitative conclusions concerning a cluster may be directly applied to the corresponding crystal. In particular, if local molecular characteristics (such as atomic charges, bond orders, valences, and covalences) of a cluster are notably affected by correlation effects and UHF cluster calculation reproduces this tendency, then the UHF calculation of a crystal should certainly display the same tendency. There exists one simple but important case where more detailed analysis is possible. Indeed, let us consider a molecular system (cluster) with a nondegenerate singlet ground state that can be described by a MCSCF wavefunction with dominating contribution of only two configurations: ΨM CSCF = C1 det | . . . ϕh αϕh β| + C2 det | . . . ϕl αϕl β|

(9.28)

With the aid of a nondegenerate (nonorthogonal) transformation (for the standard case C1 > 0 and C2 < 0) generalized valence bond orbitals may be constructed: -   4 1 4 ϕa = (9.29) C1 ϕh + |C2 |ϕl 2 -   4 1 4 ϕb = (9.30) C1 ϕh − |C2 |ϕl 2

9.1 Theoretical Analysis of Chemical Bonding in Crystals

349

Simple algebraic manipulations lead to the conclusion that ΨM CSCF ≃ Φab + Φba

(9.31)

Φab = det | . . . ϕa αϕb β|

(9.32)

Φba = det | . . . ϕb αϕa β|

(9.33)

where and are typical single-determinant UHF configurations. These determinants correspond to zero projection of the total spin but are not, in general, S 2 eigenfunctions. Their symmetrical combination gives the initial singlet wavefunction (9.28) whereas the antisymmetrical combination gives the related triplet state. In general, the nondiagonal ˆ ab differs from zero and its absolute value may serve as a matrix element Φab |H|Φ certain measure of the UHF method’s capability to account for Coulomb- correlation effects. Indeed, if this matrix element is small (in absolute value) then singlet and triplet states are energetically close and the UHF method for a singlet state accounts for about the same part of the correlation effects as the MCSCF one with wavefunction (9.28). Calculations of the lowest singlet and triplet states of cluster [Ti2 O12− ], see Fig. 9 9.1, were performed by UHF and CASSCF methods using the GAMESS program set for molecular calculations [35]. The cluster includes two nearest Ti atoms and their nearest oxygen neighbors. The initial MOs for this cluster were obtained by the RHF method with C3h as the point-symmetry group. The active space of the CASSCF method involved five highest occupied and three lowest virtual MOs (active space [2a′ 2a′′ 2e′ ]10 ). From Table 9.9 it is seen that the cluster chosen reasonably reproduces the Ti atom’s local properties compared with periodic calculations for Sz = 0 (see Table 9.8). In UHF calculations, QTi = 2.22 (cluster model), QTi = 2.32 (periodic model), CTi = 1.37 (cluster model), and CTi = 1.23 (periodic model). It turned out that the singlet state of the cluster under consideration is described by two configurational wavefunctions. 0.8[ϕ2h ϕ0l ] − 0.6[ϕ0h ϕ2l ]

(9.34)

whereas the related triplet state with SZ = 1 is reasonably described by a single determinant. The comparison of the total energies for the cluster shows (see Table 9.9) that the UHF calculation reproduces well the small difference of the CASSCF energies for the total spin values S = 0 and S = 1. Moreover, as seen from Table 9.9, the UHF calculation describes correctly the influence of the correlation effects on the Ti– Ti bond-order value. Indeed, in RHF calculations this bond order constitutes 0.88, whereas in UHF calculations the bond-order values are 0.03 for Sz = 0 and 0.01 for Sz = 1, in full accordance with CASSCF calculations (0.09 for S = 0 and 0.01 for S = 1). At the same time, the Ti atomic charges are practically not affected by the method used. Calculations of the electronic structure of crystals TiO2 and Ti2 O3 and corresponding cluster show that numerical results for local properties of the electronic structure of crystals (atomic charges, covalences, free and total valences, and bond

350

9 LCAO Calculations of Perfect-crystal Properties

Table 9.9. Energies and local characteristics of electronic structure of molecular cluster [Ti2 O9 ]12− in UHF and MCSCF calculations Characteristics of UHF MCSCF electronic structure Sz Sz =0 Sz =1 Sz =0 Sz =1 E (a.u.) –137.874 –137.867 –137.913 –137.904 2.22 2.28 2.11 2.12 QTi –1.68 –1.68 –1.63 –1.64 QO1 QO2 –1.90 –1.90 –1.89 –1.89 0.03 0.01 0.09 0.01 WTi−Ti WTi−O1 0.17 0.17 0.19 0.20 0.27 0.27 0.31 0.32 WTi−O2 1.37 1.34 1.62 1.56 CTi CO1 0.63 0.62 0.70 0.71 0.21 0.21 0.23 0.24 CO2 VTi 3.01 3.02 3.07 3.04 2.02 2.02 2.02 2.03 VO1 2.01 2.01 2.01 2.01 VO2

orders) depend on (a) Choice of basis for calculation (LCAO, PW); (b) Choice of Hamiltonian (RHF, UHF, DFT); (c) Choice of population analysis (POPAN) scheme (L¨ owdin, Mulliken). The effects of electron correlation on local properties may be estimated using (a) periodic and cluster DFT and hybrid HF–DFT calculations in the periodic model; (b) post-HF calculations in the molecular cluster model; (c) the results of (a) and (b) agree when the appropriate cluster choice is made and the same basis and population analysis are used. To minimize the essential dependence of results on the basis-set choice and POPAN, it is reasonable to generate Wannier-type atomic functions that are orthogonal and localized on atomic sites. These functions can be generated from Bloch-type functions (after relevant symmetry analysis), see Chap. 3. In the next section it is shown that the results of POPAN with use of Wannier-type atomic functions weakly depend on the basis choice in Bloch function LCAO calculations. 9.1.4 Wannier-type Atomic Functions and Chemical Bonding in Crystals As we have seen above chemical bonding in crystals (as well as in molecules) is analyzed in terms of the local properties of the electronic structure, obtained from the one-electron density matrix, written in a localized basis. Since local properties of electronic structure are essential ingredients of a number of theories and models (for example, the numerical values of atomic charges are used in the atom–atom potentials of the shell model), their estimation is of great importance. Traditionally, the same AO basis is used both in LCAO SCF calculations and in the local properties definition, as was noted above. However, this approach is not always reliable, since the results of the population analyses are often strongly dependent on an inclusion of diffuse orbitals into the basis (useful for the electronic-structure calculations) and on the scheme chosen for the population analysis.

9.1 Theoretical Analysis of Chemical Bonding in Crystals

351

As discussed in Chap. 3 the variational method of localized functions generation allows development of an approach of the chemical-bonding analysis, which is much less basis-set dependent than the conventional approaches. The population analysis in this case is done using the density matrix given in the minimal valence basis of Wanniertype atomic orbitals (WTAOs) – Wannier functions centered on atoms and having the behavior of atomic-valence states in the cores of atoms [47, 603, 604]. WTAOs are analogous to atomic functions in form and by symmetry but, in contrast to the initial LCAO basis, they are directly connected with the calculated electronic band structure and the Bloch states involved. WTAOs are constructed from the occupied and some vacant Bloch states, chosen so that they assure the maximal localization for the corresponding WTAOs (see Chap. 3). The summary of the results of WTAO application for the calculations of local properties of the electronic structure of periodic systems is given in [605]. WTAOs are defined as the Wannier functions that are constructed from a set of specially chosen occupied and vacant bands and have a definite symmetry (they are centered on atoms and transform via irreducible representations (irreps) of the corresponding site groups). Thus, the index t in (3.114) may be substituted by several βµ indices – i, j, a, β, µ – that reflect the symmetry properties of the WTAOs – Wija (r − an ): the index a marks the symmetrically nonequivalent atoms, the index j runs through the set of symmetrically equivalent atoms of the type a; the Wyckoff positions of these atoms q a are characterized by their site groups, whose irreps are labeled by the index β, the index i numbers the basis functions of the irrep β and the index µ discriminates between the independent sets of the functions transforming according to the same irrep β. The requirement for WTAOs to have fixed symmetry properties implies additional restrictions on the matrices U (k) in (3.112). These restrictions can be completely taken into account by using, instead of canonical Bloch orbitals, their linear combinations, symmetrized according to the desired irreps of the site-symmetry groups of atoms [47]. WTAOs were generated by the variational method [604], which allows both orβµ βµ thogonal Wija (r − an ) and nonorthogonal Vija (r − an ) sets of symmetry adapted WTAOs to be obtained. In this method the functional     (β,1) 2 Iβα = ωβα V11a (r) dr (9.35) with the weight function:

ωβα =



−3/2 2 πrβα



(r − q a )2 exp − 2 2rβα



(9.36)

2 is maximized (rβα is a parameter, for which a value of 1 ˚ A was used). The orthogonal βµ βµ (r − an ) via WTAOs Wija (r − an ) are obtained from the nonorthogonal ones Vija L¨ owdin’s procedure:  −1/2 W = V S (V ) (9.37)

βµ where S (V ) is the overlap matrix of nonorthogonal WFs Vija (r − an ), and W and V are row vectors constituted by the sets of the orthogonal and nonorthogonal WFs, correspondingly. The orthogonalization procedure can be performed either in the direct or reciprocal space. The latter is computationally faster.

352

9 LCAO Calculations of Perfect-crystal Properties

Before constructing the minimal basis of WTAOs one should choose the energy bands whose states are to be used in the process of the WTAOs generation. For each of the WTAOs a band or a group of bands is chosen according to the following criteria: the band states should be compatible with the corresponding WTAOs by symmetry, in the context of the induced representations (indreps) theory, see Chap. 3, and provide the maximal localization for them. Hereafter, we mark such bands by the type of the WTAOs corresponding to them (e.g. s-band of the oxygen atom: the s-WTAOs centered on oxygen and constructed from the states of this band appear to be the most localized comparing to those constructed from any other states). After the desired bands for all the WTAOs are chosen the final WTAOs are constructed using the states from this group of bands. When the WTAOs (orthogonal or nonorthogonal) are found, the density matrix is calculated in the localized basis of these functions. The local properties are expressed via the matrix elements of this matrix. WTAOs’ analog of Mulliken population analysis is made using nononorthogonal WTAOs. Let us now consider WTAOs VνA (r − an ) (ν-th WTAO of atom A in the nth cell) as the linear combinations of Bloch functions:  VνA (r − an ) = bτ k,νAn ϕrk (r), or V = ϕb, ϕ = Vb−1 (9.38) τk

where Bloch functions ϕrk (r) are given in LCAO or PW basis. The density matrix in the corresponding basis ρ(V ) can be written in the following way: ρ(V ) = 2¯b−1¯b

(9.39)

where ¯b is the truncated matrix b with rows corresponding only to the occupied states. For the orthogonalized WTAOs:  WνA (r − an ) = dτ k,νAn ϕrk (r), or W = ϕd, ϕ = Vdf † (9.40) τk

the density matrix ρ(V ) is given by ρ(V ) = 2d¯† d¯

(9.41)

The electronic population NAn of an atom A in the nth primitive cell and an order of the bond WA0,Bn between an atom A of the reference cell and an atom A′ in the nth cell can be obtained from the density matrix (9.41):  A0,A0 NAn = NA0 = ρνν (9.42) ν

WA0,Bn =



A0,Bn Bn,A0 ρµν ρνµ

(9.43)

µν

Using these quantities one can obtain the atomic charge QA (9.10) of an atom A, the covalence CA (9.12) and total valence VA (9.13) of this atom. To demonstrate the efficiency of WTAO use for chemical-bonding analysis, we consider at first the cubic crystals with the perovskite structure [603]. The LCAO

9.1 Theoretical Analysis of Chemical Bonding in Crystals

353

approximation in the HF and DFT methods was used to calculate the band structure and the Bloch functions of bulk SrTiO3 (STO), BaTiO3 (BTO), PbTiO3 (PTO) and LaMnO3 (LMO) crystals. The Hay–Wadt pseudopotentials [483] were adopted: smallcore for Ti, Sr, Ba, La and Mn atoms, large-core for Pb atoms. The oxygen atoms were included with the all-electron basis set. The optimized Gaussian-type atomic basis was taken from [606], where the same pseudopotentials were used. The basis optimization made it possible to obtain the lattice constant, bulk modulus and elastic constants of the considered crystals that were in good agreement with the experimental data. For the exchange-correlation functional the hybrid HF-DFT form (B3PW) was used, as it reproduces, for optimized basis sets, optical band gaps close to the experimental values [606]. The Monkhorst–Pack [14] mesh of 4×4×4 = 64 k-points, used in the calculations, corresponds to a cyclic model with 64 primitive unit cells in the direct lattice, see Chap. 3. An increase of this number in the band- structure calculations up to 8×8×8 = 512 does not lead to any significant changes in the values of the one-electron energies. The cubic structure of perovskite-like ABO3 compounds is characterized by the primitive cubic lattice with the Oh1 (P m3m) space group, see Sect. 2.3.2. The A-atoms and B-atoms occupy the Wyckoff positions a (0,0,0) and b (0.5,0.5,0.5), correspondingly, with the site group Oh . The oxygen atoms occupy c (0.5,0.5,0) positions, site group D4h . The minimal atomic-like basis for the crystals under consideration consists of s- and p-type functions of the oxygen atoms, s- and d-type functions of the Ti atoms and s- and p-type functions of Sr, Ba and Pb in STO, BTO, PTO, or sand d-type functions of La and Mn in LMO. So these are the types of WTAOs to be used in the population analysis for the compounds under consideration. Table 9.10 lists the symmetries of these functions. Table 9.10. The symmetry properties of the WTAOs of the minimal valence basis for STO, BTO, PTO and LMO crystals Atom Function’s type Symmetry Sr, Ba, Pb s (a, a1g ) p (a, t1u ) La s (a, a1g ) d (a, t2g ) + (a, eg ) Ti, Mn s (b, a1g ) d (b, t2g ) + (b, eg ) O s (c, a1g ) p (c, a2u ) + (c, eu )

Once the types of WTAOs are determined one should find the energy-bands states corresponding to these WTAOs. First, the bands to be chosen should be symmetry compatible with the corresponding WTAOs (see [604] for details). Secondly, the WTAOs constructed from the Bloch states of the chosen bands should be principally the most localized WTAOs of the corresponding type. The analysis of the electronic structure of STO and BTO has shown (excluding the semicore states from consideration) that the oxygen s- and p-bands and the Sr (Ba) atom p-bands form 15 upper

354

9 LCAO Calculations of Perfect-crystal Properties

valence bands states, see also next section. The Ti atom d-states form the five lowest conduction bands, while the Sr (Ba) and the Ti atom s-states are located among vacant conduction-band states very high in energy. In the case of PTO the difference in the location of the bands is that the Pb atom s-band is one of the valence bands and the Pb atom p-bands are vacant and lie high in the conduction band. This agrees with the results of DFT LDA calculations [607]. Unlike STO, BTO and PTO, the electronic structure of cubic LMO is metallic both in HF and DFT calculations (a nonzero bandgap in LMO appears only if an orthorhombic structure with four formula units in the primitive cell is considered). The s- and p-bands of the oxygen atoms are occupied. As in STO and BTO the sbands of the metal atoms are located at high energies. But the d-bands of both metal atoms are located in the region of the Fermi energy. These bands are partly occupied and partly vacant, which is caused by the metallic nature of the calculated electronic structure. The WTAOs that are used in the population analysis are built from the space of all the chosen bands taken together. The density matrix is then calculated using the coefficients connecting the orthogonal or nonorthogonal WTAOs and the occupied Bloch states. In Table 9.11 the atomic charges for STO, BTO, PTO, correspondingly, calculated by the WTAOs technique, and using the traditional Mulliken population-analysis scheme are compared. Table 9.11. Atomic charges in cubic ATiO3 (A=Sr,Ba,Pb) Method of electronicstructure calculation

HF

DFT

HF

DFT

HF

DFT

Population-analysis Atomic charges, |e| scheme Sr Ti O nonorthogonal WTAO 2.00 3.20 –1.73 Orthogonal WTAO 2.00 3.13 –1.71 Mulliken 1.92 2.76 –1.56 nonorthogonal WTAO 2.00 2.68 –1.56 Orthogonal WTAO 2.00 2.63 –1.54 Mulliken 1.87 2.35 –1.40 Ba Ti O nonorthogonal WTAO 2.00 3.19 –1.73 Orthogonal WTAO 2.00 3.16 –1.72 Mulliken 1.86 2.82 –1.56 nonorthogonal WTAO 2.00 2.65 –1.55 Orthogonal WTAO 2.01 2.60 –1.54 Mulliken 1.80 2.37 –1.39 Pb Ti O nonorthogonal WTAO 1.99 3.27 –1.75 Orthogonal WTAO 1.89 3.14 –1.68 Mulliken 1.59 2.79 –1.46 nonorthogonal WTAO 1.99 2.72 –1.57 Orthogonal WTAO 1.93 2.64 –1.52 Mulliken 1.34 2.34 –1.23

9.1 Theoretical Analysis of Chemical Bonding in Crystals

355

The Mulliken atomic charges coincide with those given in [606]. The results of the WTAO population analysis in these three crystals show the following: 1. The results of population analysis performed on orthogonal and nonorthogonal WTAOs are close. 2. The fully ionic charge +2 for the Sr, Ba or Pb atoms remains practically the same for both methods of the electronic-structure calculation – Hartree–Fock and DFT. The only exception is the orthogonal WTAOs analysis in PTO, but even in this case the charge is very close to +2. The reason for such a high ionicity is related to the high-energy location of the s-bands of the Sr and Ba atoms and the p-bands of Pb atom, which leads to a negligible contribution of the corresponding WTAOs to the covalence of these atoms. The switch from the HF calculations to DFT practically does not affect the location of high-lying vacant bands of the Sr, Ba and Pb atoms and, therefore, no covalence for these atoms appears. On the contrary, the traditional Mulliken analysis displays some covalence for these atoms, which increases in the case of DFT calculations. This is especially noticeable in a PTO crystal. 3. The Ti and O atom charges differ from the purely ionic ones (indicating a partial covalence of the Ti and O atoms). For these atoms the covalence is higher in the DFT calculations than in the HF ones. This correlates with the decrease of the bandgaps in DFT calculations compared to the HF ones (in DFT calculations the d-bands of the Ti atom shift down and become closer to the valence oxygen bands). As a result, mixing of the vacant states of the Ti atom d-bands with the oxygen WTAOs increases, generating the larger values of the covalence for these atoms. 4. The results of the WTAO analysis demonstrate a mixed (ionic-covalent) character of chemical bonding in ABO3 crystals. However, the ionicity, calculated by the WTAOs method, appears to be larger than that obtained in the traditional Mulliken population analysis. 5. The values of atomic charges in all the three considered perovskite-type crystals are close. The values of some other local characteristics of the electronic structure of STO, BTO, PTO – bond orders, covalences and full valences of atoms – are listed in Table 9.12. These values correspond to nonorthogonal WTAOs analysis. The results given in Table 9.12 allow the following to be concluded. 1. The numerical values of the local characteristics of the electronic structure of the cubic STO, BTO, PTO are very close. 2. The covalence in these crystals appears only in the nearest-neighbor Ti–O bonds (all the other bonds manifest almost no covalence both in HF and DFT calculations). Each Ti atom has six bonds of this type, and each oxygen atom two bonds. In DFT calculations the value of the bond order is larger than in HF ones. 3. Both in the DFT and HF calculations the values of the total calculated valence of the metal atoms practically coincide with the values of the oxidation state used by chemists for these compounds. The population analysis is not entirely correct for metallic crystals, because they are characterized by a special metallic type of bonding. But since the nonconducting state in LMO arises already within small distortions from the cubic structure, a formal population analysis performed on the cubic structure can show some tendencies in the local properties. Their values for the cubic LMO obtained with the help of the orthogonal WTAOs in HF calculations are given in Table 9.13. Analyzing these values one can conclude the following. 1. Some of the results are principally different from those of STO, BTO and PTO. These are a nonzero covalence of the A (La) atom, a nonzero La–O bond order, the calculated valence of the B (Mn) atom is different from the expected one. Probable reasons for these results

356

9 LCAO Calculations of Perfect-crystal Properties Table 9.12. Atomic charges in cubic ATiO3 (A=Sr,Ba,Pb) Method of electronic- Order of structure calculation Ti–O bond HF DFT

0.24 0.36

HF DFT

0.24 0.37

HF DFT

0.22 0.35

Covalence Sr 0.00 0.00 Ba 0.00 0.01 Pb 0.02 0.04

Ti 1.47 2.28 Ti 1.46 2.33 Ti 1.35 2.23

O 0.51 0.82 O 0.51 0.83 O 0.47 0.80

Full valence Sr 2.00 2.00 Ba 2.00 2.01 Pb 2.00 2.02

Ti 4.01 4.06 Ti 4.01 4.06 Ti 4.01 4.06

O 2.01 2.02 O 2.01 2.02 O 2.01 2.02

Table 9.13. Local properties of electronic structure of cubic LaMnO3 Atomic charges Bond orders Covalence Full valence La Mn O La–O Mn–O La Mn O La Mn O 2.48 2.09 –1.53 0.08 0.16 1.00 2.48 0.80 3.04 3.68 1.98

are connected with the metallic nature of the considered crystal in cubic structure and with the difference of the LMO crystal from STO, BTO or PTO. 2. On the other hand, the value of the La atomic charge is relatively close to the fully ionic one +3. Besides, the calculated valences of the La and oxygen atoms are similar to those obtained in STO, BTO and PTO crystals. This indicates the similarity between these crystals and LMO, manifested in spite of the metallic nature of the latter. 3. The largest value of a bond order in LMO corresponds to the nearest-neighbor Mn–O bond. This correlates with the interatomic charge distribution in STO, BTO and PTO. The difference is in the value of the bond order – in LMO this bond order is smaller, while the covalence (which is, actually, the sum of all the bond orders) of the Mn atoms practically coincides with that of the Ti atoms in the other three considered crystals. This is, apparently, a consequence of the metallic nature of LMO, which leads to smearing of the nearest-neighbor Mn–O bond charge over the other bonds. Finally, we note that the local properties for STO, BTO and PTO not that close to each other might be obtained if noncubic low-temperature phases are studied. It is especially important to consider the orthorhombic phase of LMO since in this phase LMO is no longer metallic. WTAO population analysis can be made also using the Bloch functions found in the calculations with plane-wave basis (as was noted, the majority of modern computer codes for periodic systems calculations use this basis and the DFT Hamiltonian). The results of chemical-bonding analysis for crystal MgO, performed via the conventional and WF schemes of population analysis, were compared in [608]. The MgO crystal is a good testing system for studying the accuracy of such methods, since on the one hand, the nature of chemical bonding in it is well known to be ionic, and on the other hand, some of the methods give contradictory results of chemical-bonding analysis in this crystal (see below and [601, 609]).

9.1 Theoretical Analysis of Chemical Bonding in Crystals

357

The electronic structure for the MgO crystal was calculated in [608] both in the LCAO approximation and in the PW basis. In both cases the calculations were done by the density-functional theory (DFT) method in the local density approximation (LDA). The Monkhorst–Pack set of special points of BZ, which allows a convergence to be obtained (relating to extended special-points sets) in the calculations of electronic structure, was used in both cases. For the LCAO calculations the Durand–Barthelat pseudopotential [484] was used. In the case of the PW calculations the normconserving pseudopotential and a PW kinetic energy cutoff of 300 eV were used. For construction of the WTAOs the delta-functions were used as the weight functions in the variational functional (9.35). In this case, the variational procedure is equivalent to projecting the delta-functions onto the space of the states of chosen energy bands and demands a very low computational effort. In both types of calculations the s- and p-bands of oxygen atoms form the four valence bands. The s-band of the Mg in the case of the LCAO basis is the highest possible (twelfth) conduction band. For the PW calculations, the lower 32 conduction bands were examined. This analysis showed that the s-band of the Mg atom in PW calculations is also located among high-energy conduction bands. If one considers more than 32 conduction bands, the location of the s-band of the Mg atom can only increase, which would not affect the results of the population analysis. The calculations [608] showed that the WTAOs, corresponding to the LCAO and PW bases are essentially different in their form. This distinction is probably caused mainly by the difference in the structure of the bases used for the LCAO and PW calculations. All the WTAOs, excluding the s-WTAO of the Mg atom in the PW calculations, are well localized. The poor localization of the latter is probably due to considering only 32 lower bands, while the actual s-band of the Mg atom might lie higher in the energy than the examined ones. Anyway, the difference in the WTAOs’ form and localization level does not affect the results of WTAO-based population analysis for MgO. The atomic charges and covalences, calculated within the conventional approaches and WTAOs method, are given in Table 9.14. Table 9.14. Calculated atomic charges and covalencies in MgO Basis

Population analysis

Charge on Mg atom Atomic Mg Mulliken 1.93 0.15 LCAO L¨ owdin 1.54 0.88 Mulliken 1.06 1.63 PW L¨ owdin 0.90 1.90 Nonorthogonal WTAOs 2.00 0.00 LCAO Orthogonal WTAOs 1.97 0.05 Nonorthogonal WTAOs 2.00 0.00 PW Orthogonal WTAOs 1.93 0.13

covalence O 0.30 1.13 1.65 1.89 0.00 0.05 0.05 0.14

The spilling parameter for the projection procedure (see Sect. 9.1.6) in the PW calculations was 2.5 × 10−3 . It is seen from this table that among the traditional schemes, only the Mulliken analysis performed for the LCAO calculations exhibits a

358

9 LCAO Calculations of Perfect-crystal Properties

more or less ionic picture of chemical bonding in MgO. All the other conventional methods give the results corresponding to the mixed ionic-covalent type of bonding, which is actually quite unnatural for MgO. Besides, for the traditional methods the values of the atomic charges and covalences are significantly different depending on the calculation scheme and the type of basis. On the contrary, the method based on orthogonal or nonorthogonal WTAOs correctly demonstrates the ionic nature of chemical bonding in MgO crystal whatever basis is used for the electronic-structure calculations. The values obtained within the different types of basis are close and correspond to the practically pure ionic character of bonding in this crystal. Though the LDA band-structure calculations for the MgO crystal in LCAO and PW bases give different values for the total energy and bandgap width and the forms of corresponding WTAOs are quite dissimilar, nevertheless, the results of population analysis performed in the basis of WTAOs are practically the same. This is a consequence of a high-energy location of the s-band of the Mg atom in both types of calculations. 9.1.5 The Localized Wannier Functions for Valence Bands: Chemical Bonding in Crystalline Oxides The approach to the analysis of the chemical bonding in crystals discussed above is based on the population-analysis procedure, applied in the basis of AOs or WTAOs. In the second approach [63] the Wannier functions are generated using the Bloch functions of only the upper valence bands (see Chap. 3), so that the number NW F of WFs per primitive cell is equal to the number of valence bands under consideration. For metal oxides, considered in this section, the upper valence energy bands are formed by 2s and 2p states of oxygen atoms. Therefore, the number of WFs per cell NW F = 4Nf NO (Nf is the number of formula units per cell, NO is the number of oxygen atoms in the formula unit). In particular, NW F = 4, 24, 48 for MgO, Al2 O3 and AlPO4 crystals with one, two and three formula units per cell, respectively. This approach provides the additional numerical characteristics of chemical bonding, which complement the population analysis in periodic systems. Any of the WFs in the reference cell is given in the AO basis set (used in the Bloch-functions calculation) as Wi (r − g) = Wi (r) =

M  

µ=1 g ′



g χµ (r − Aµ − g ′ ) Cµi

(9.44)



where the orthonormality condition Wig |Wig = δgg′ holds for the periodic images g′ Wi (r − g) of the reference cell WF. The coefficients Cµi in (9.44) are related to the coefficients Cµi (kj ) in the Bloch functions of M valence bands by the relation  g′ Cµi (kj ) = exp(−ikj g ′ )Cµi (9.45) g′

In these relations µ = 1, 2, . . . , M numbers AOs in the primitive cell, g is the direct lattice translation vector, i = 1, 2, . . . , NW F numbers the valence bands and WFs and kj (j = 1, 2, . . . , L) are defined by the size of cyclic system L used for the summation

9.1 Theoretical Analysis of Chemical Bonding in Crystals

359

over BZ (see Chap. 3). WFs are characterized in terms of their Mulliken atomic populations by   g g+g′ ′ g g qA,i = Cµ,i Cνi Sµν (9.46) µ∈A ν,g ′

where the first sum runs over the AOs µ centered on atom A and the second one over all the AOs ν and cells g ′ . The gatomic populations (9.46) are normalized to one i.e., they satisfy the condition qA,i = 1. These populations are used to describe A,g

g gives the fraction of the electron density the localization properties of WFs, as qA,i of WF Wi (r) assigned to atom A in cell g. The range of WF Wi (r) localization is defined by nonzero values of (9.46) in spheres of atoms around the localization center of WF. The latter (centroid position) is defined by    2 2 r¯i = r |Wi (r)| dr = x ¯si e¯s , x ¯si = xs |Wi (r)| dr (9.47) s

The centroid positions are used in the definition of the second-order central moment tensor, τi,lm of the electron density associated to WF Wi (r):  2 τi,lm = dr |Wi (r)| (rl − ri,l )(rm − ri,m ) (9.48) where r = (r1 , r2 , r3 ) and r i = (ri1 , ri2,ri3 ). Tensor (9.48) contains useful information on the shape and spatial extent of the WFs. Centroid position r i of the WF Wi (r) also determines the so-called polarization fraction for Wi (r):    (r i − r A )(r B − r A )   , (0 ≤ Pi ≤ 1) Pi = 2 (9.49) − 1  |r b − r A |2

which is proposed to estimate the degree of ionicity and covalency of the chemical bonding between atoms A and B (r A and r B are their position vectors). This parameter takes the value Pi = 1 for a pure ionic bond and Pi = 0 for a pure covalent bond. A and B atoms are supposed to give the two largest contributions of the Mulliken atomic population to the WF Wi (r). These indices were used to analyze the chemical bonding in semiconductors [610] and metal oxides [63], based on HF LCAO calculations. In Table 9.15 the results for metal oxides are presented. In this table Nf , NW F and Nc are the number of formula units in the primitive cell, the number of valence-WFs in the primitive cell and the coordination number of the oxygen atom. According to the point symmetry at the O position, the four WFs can be equivalent, as in the case of MgO and MnO, or split into 2, 3, or 4 sets; the number of equivalent WFs in each set is indicated in the Neq column. In those systems where crossings occur between the valence and the most diffuse semicore bands (the transition-metal oxides MnO and ZnO and CaSO4 ) the cation d and the Ca 2p bands, respectively, have also been included within the active subspace. In MnO, where only the ferromagnetic spin polarized solution was considered, α and β subspaces are localized independently (the former conventionally containing the five Mn d states), [63]. In the right part of the table some features of the oxygen-WFs are provided: Neq is the number of equivalent oxygen-WFs in the set; q1 , q2 and q3 are the three largest Mulliken atomic populations (the number of

360

9 LCAO Calculations of Perfect-crystal Properties

equivalent contributions is given in brackets!). The Or column indicates whether the second-order moment tensor principal axis is oriented along the bond axis (y) or not (n), and the last column classifies the WFs as covalent bond (cv), ionic (io), or lonepair (lp). The degree of localization of the oxygen WFs is estimated in terms of the Table 9.15. Characterization of the oxides through their symmetry and WF features [63] (explanations are given in text)

MgO MnO-α MnO-β ZnO

Space group F m3m F m3m — P 63 mc

Al2 O3

R3c

System

Nf NW F Nc Neq 6 6

2

4 9 4 18

2

24

4

P 32 21 3

24

2

AlPO4 P 31 21 3

48

2

CaSO4 P 62 22 3

48

1

SiO2

1 1

4

4 4 4 1 3 2 2 1 1 1 1 1 1 1 1 3 1

q1

q2

q3

0.991 1.005 0.969 0.929 0.927 0.964 0.942 0.957 0.947 0.815 0.812 0.965 0.952 0.910 0.821 0.958 0.711

0.005(2) –0.001(4) 0.016(2) 0.065(3) 0.065(3) 0.043 0.060 0.022 0.029 0.167 0.171 0.030 0.031 0.070 0.173 0.039 0.296

0.004 — 0.005 0.002 0.003 0.004 0.003 0.020 0.026 0.017 0.017 0.006 0.021 0.023 0.006 0.004 0.001

Or Class n n n y y y y n n y y n n y y n y

io io io cv cv cv cv lp lp cv cv lp lp cv cv lp cv

Mulliken atomic populations (9.46), attributed to oxygen and its neighboring atoms. These data are summarized in columns q1 , q2 , and q3 of Table 9.15. It turns out that, in all cases, most of the electron density is localized on the oxygen atom, q1 ranging from 0.71 (CaSO4 ) to 1.01 (MnO). The value of the second atomic contribution is never larger than 0.30 (CaSO4 ); in most cases, however, it is of the order of 0.05. The third largest atomic population is much smaller and never exceeds 0.03 (SiO2 ). The Or column provides information as to whether the principal axis connected to the largest eigenvalue of the second-order moment tensor is oriented along the bond axis or not. The bond axis of an O-WF is defined as the line joining the oxygen and the atom that brings the second largest contribution to the total population. For ease of discussion, one can try to use the two kinds of information (qi and Or indices) to classify (with a certain degree of arbitrariness) the O-WFs bonds as covalent bond (cv), lone-pair (lp), or ionic (io). In particular, it is considered as cv, a WF oriented along the bond direction, (orientation criterion); alternatively, a WF can be classified as cv, when q1 < 0.95 and q2 > 0.05 (population criterion), where q1 and q2 are the two largest contributions to the total population (see Table 9.15). A non-cv-WF is classified as io or lp when the coordination number of O is larger or smaller than 4 (the number of WFs formally attributable to oxygen), respectively. As is shown in [63], io and lp WFs do have quite different characteristics. The two criteria provide a very

9.1 Theoretical Analysis of Chemical Bonding in Crystals

361

consistent classification, the only exception being the most localized O-WFs of Al2 O3 , classified as cv or not according to the first or second criteria, respectively. Indeed in this case, both types of WFs are of the same chemical nature and quantitative differences are probably due to geometrical constraints. The orientation criterion seems to be the most appropriate and has been adopted (see last column of Table 9.15). This classification allows various trends to be traced with respect to the nature of the O-WFs along the series of compounds, as was done in [63]. In particular, it turns out that WFs give quite a complete picture of the chemical nature of the X–O bond, indicating that the covalent character increases according to the following sequence with respect to X: Mg < Mn < Al < Zn < Si < P < S. This order coincides with the cation Pauling electronegativities and demonstrates the atomic nature dependence of the chemical bonding in crystals. This approach was applied also in [611] in the comparative study of chemical bonding in SrTiO3 and SrZrO3 crystals. The results of these calculations are discussed in the next section in the consideration of the projection technique for population analysis in crystals. The numerical values of the indices dependence on the basis-set choice requires additional investigation. It is evident that use of L¨ owdin atomic populations instead of Mulliken ones can change the localization of WFs, especially in the case when diffuse AOs are included in the basis set. From this point of view the WTAOs use is preferable. As was demonstrated above, the numerical values of local properties are close in Mulliken and L¨ owdin population analysis made with WTAOs. In the approach [63] WFs are generated directly from Bloch valence states without any preliminary symmetry analysis. In this case one obtains WFs that have the centroid positions in the vicinities of some points of the direct lattice of the crystal occupied by atoms or being midpoint between the pairs of symmetry-equivalent atoms (for the oxides listed in Table 9.15, these points are near oxygen atom positions). The noncontradictory chemical interpretation of the WFs obtained is difficult due to the absence of the symmetry analysis. Indeed, it is difficult to explain the appearance in MgO crystal (see Table 9.15) of four equivalent WFs corresponding to the tetrahedral sp3 hybridization, while the oxygen atom is octahedrally coordinated. The improvements of this theory were suggested in [612]. The importance of the symmetry analysis in the procedure of the generation of maximally LOs in crystals was shown. It was suggested that the numerical parameters of the LOs corresponding to the valence energy bands of the crystal can be used in the theory of chemical bonding only if these functions form bases of irreducible representations of site-symmetry groups of atoms and bonds in crystals. The background of LOs symmetry analysis is the theory of band representations (BRs) of space groups, considered in Chap. 3. This analysis is applicable both to nonorthogonal atomic-like localized orbitals, centered on the atoms, and to localized Wannier orbitals (LWOs), i.e. to an orthonormal set of LOs. BRs of space groups are used to identify possible LOs symmetry from the symmetry of the canonical (Bloch) orbitals of the calculated energy bands or to establish the fact that the construction of LOs from the canonical orbitals chosen is impossible for the reasons of symmetry. In the general case, the LWOs are centered on some center q and transform according to some representation Re (in the general case reducible) of the site-symmetry group Lq of this center. Let us represent these ! (β) transforming according to IRs β functions as linear combinations of the LWOs W j

362

9 LCAO Calculations of Perfect-crystal Properties

of the site group Lq , Wi (r) =

 β,j

! (β) (r), αT α = E αβj,i W j

(9.50)

The transformation, with the help of the matrix α, is orthogonal as it relates to two orthonormal bases in the space of the representation Re (E is the unit matrix). Inserting (9.50) in (9.47), one obtains  (s) ∗ (9.51) x ¯si = Dβj,β ′ j ′ αβj,i αβ ′ j ′ ,i ββ ′ jj ′



) (s) ! (β) (r)|xs |W ! (β where the number of independent values Dβj,β ′ j ′ = W j j ′ (r) is equal to the number of irreducible components of the vector representation contained in the symmetric square {Re × Re∗ }+ of the representation Re [13]. If Wi (r) coincide with their irreducible components (αβj,i = δβj,i ), then r i = 0 for centrosymmetric site (s) groups Lq as all Dβj,β ′ j ′ = 0(¯ xsi = 0). In the general case, as seen from (9.51), r i = 0 and their lengths and orientations depend on the value of the coefficients αβj,i . Being functions of the centroid position, the polarization fractions Pi (9.49) also depend on the value of the coefficients αβj,i . It is obvious that in the general case one can not attribute to the centroid of a LWO some physical meaning. But a particular choice of LOs can attach to the centroid a common sense useful in the theory of chemical bonding. LWOs WA (r) sited on atoms describe lone pairs or a purely ionic bonding (Pi = 1). LWOs WB (r) sited on interatomic bonds mean the presence of a covalent component of the chemical bonding (0 < Pi < 1), the degree of covalence being determined by the value of the polarization fraction Pi that takes the form     di − d A (9.52) − 1 Pi = 2 d B − dA

where dA , dB , and di are positions of atoms A, B, and the centroid of the LWO Wi (r) on the bond line A − B counted off some arbitrary point on it. In the latter case, the BR associated with the valence bands of the crystal has to include the BR induced from some IR β of the site-symmetry group Lqb of the bond. The value Pi = 0 corresponds to a pure covalent bond. Note that this BR is a composite one. Indeed, the group Lqb is a subgroup of the site group LqA of the atom A (and of the site group LqB of the atom B) lying on the bond. The IR β induces in the groups LqA some reducible representation that, in its turn, induces in the space group G a composite BR [13]. There is an exception when a middle point of the bond is a symmetry point. In this case, the IR of the site group of this point induces in the space group G a simple BR. This situation takes place, for example, in the Si crystal where the IR a1g of the site group D3d of the middle point of the bond Si–Si (Wyckoff position c) induces in the space group Oh7 of the crystal the BR with q-basis consisting of the canonical Bloch states of the four-sheeted upper valence band. This LWO describes the purely covalent bond (P = 0). In [612] the following procedure was suggested to describe the chemical bonding in crystals by analyzing only occupied valence states in the basis of LOs.

9.1 Theoretical Analysis of Chemical Bonding in Crystals

363

As the first step a symmetry analysis of valence band states is carried out. The purpose of this analysis is to find the q-basis indices of the band representation (BR) corresponding to the valence states of the crystal. These indices can consist of: (a1) the irreducible representations (IRs) of the site groups of the bonds (including those of symmetry points on the bond lines, if there are any); (a2) the IRs of site groups of atoms. If a composite BR has several variants to be represented as a sum of simpler ones, the preference has to be given to the BRs induced from site groups of bonds. This symmetry analysis allows the centroid positions (on atoms or on bonds) of the LOs, generated from the Bloch functions of the valence states, to be found. The numerical characteristics of only these symmetry-defined LOs are suggested to give a noncontradictory unambiguous interpretation of chemical bonding in crystals. It was proposed in [612] to introduce not only the centroids position, but also the other numerical characteristics of the chemical bond related to the centroids position: (A) (B) 1) Contributions Qi and Qi to charges on atoms A and B related to the LO Wi (r) (A)

Qi

=2

di − dB , dB − dA (A)

(B)

Qi

=2

dA − d i , dB − dA

(A)

(B)

−2 ≤ Qi , Qi

≤0

(9.53)

(B)

An electron charge Qi + Qi = −2 associated with the fully occupied LO is partitioned between atoms A and B and is inversely proportional to the distances between the centroid position and the atoms. 2) The degree of ionicity Ii of the bond A − B related to the LO Wi (r),     2di − dA − dB  1  (A)  = Q − Q(B)  , 0 ≤ Ii ≤ 1  (9.54) Ii =  i i  dB − dA 2 The degree of covalency Ki of the bond A–B related to the LO Wi (r),      2di − dA − dB   = 1 − 1 Q(A) − Q(B)  , 0 ≤ Ki ≤ 1 Ki = 1 −  i i  dB − dA 2

(9.55)

Ionicity Ii coincides with the polarization fraction (9.52). (A) (B) For pure ionic bonding Qi = −2, Qi = 0 (or vice versa), K = 0, I = 1. For pure (A) (B) covalent bonding Qi = Qi = −1, K = 1, I = 0. The definitions (9.52)–(9.55) are introduced in such a way that the LWO centroid position defines the characteristics of chemical bonding. In fact, the details of the electron density distribution have to be included, as is done in the definition (9.48) of the second-order central moment tensor. In the second step of the chemical-bonding analysis the space Ω of the states of all the valence energy bands is projected on the spaces Ωi of IR of the site-symmetry groups related to the components of the BR in the q-basis established above. The third step is the generation from the canonical Bloch valence states maximally localized orbitals in the spaces Ωi by any known procedure. The fourth step consists of calculation of numerical characteristics of the chemical bonding on the base of these LOs. This calculation includes both the characteristics, defined by the centroids positions, and those depending on the details of the electron density distribution.

364

9 LCAO Calculations of Perfect-crystal Properties

As follows from the theory of BR, the LOs obtained without any preliminary symmetry analysis, are in fact to be bases of some representations (in the general case reducible) of site-symmetry groups of the Wyckoff positions of atoms and bonds, the preference has to be given also to BRs induced from site groups of bonds. In this case, steps 2 and 3 have to be replaced by: (2a) Generation maximally LOs in the space of the canonical Bloch valence states by any known procedure. (3a) A proper symmetrization of generated LOs according to the results of the symmetry analysis of step 1. We shall illustrate the discussed procedure using the example of the SrZrO3 crystal with the cubic perovskite structure. In Table 9.16 band representations of space group Oh1 induced by those atomic states that take part in the valence band formation are given. Each line of this table defines the connection of the q-basis for site-symmetry groups Oh (Sr), D4h (O) with the k-basis at the symmetry points of BZ, see also Sect. 3.3. Table 9.16. Band representations of upper valence bands in the SrZrO3 crystal induced from Sr 4p-, O 2s- and O 2p-atomlike states Atom states Sr 4p O 2s O 2pz O 2px,y

q-basis (b, t1u ) (d, a1g ) (d, a2u ) (d, eu )

Γ −

4 1+ 3+ 4− 4− 5−

R +

5 4− 1+ 3+ 4+ 5+

M − −

X + +

2 5 1 5 1+ 5− 1+ 2+ 3− 1+ 2+ 3− 1+ 5− 3+ 4+ 5± 3− 4− 5±

To include the electron-correlation effects on the chemical bonding, the calculations of SrZrO3 crystal [612,613] were performed by the DFT LCAO method with the CRYSTAL03 code [23] and the PBE exchange-correlation potential used in [614] for the geometry optimization in the generalized gradient approximation (GGA). For the Sr and Zr atoms, the Hay–Wadt pseudopotentials [483] in the small-core approximation were used. In this case, the 4s, 4p, and 5s states of the Sr atom in the 4s2 4p6 5s2 configuration and the 4s, 4p, 4d, and 5s states of the Zr atom in the 4s2 4p6 4d2 5s2 configuration were treated as valence states. The basis functions were taken as the atomic functions of the Sr atom from [606] and the 8-411G * functions obtained for the Zr atom in [615] with optimization of the 5sp, 6sp, and 5d outer orbitals for the ZrO2 crystal with experimental geometric parameters. For the oxygen atom, the fullelectron basis set [606] describing the oxygen atom in the 1s2 2s2 2p4 configuration was used. The Monkhorst–Pack 8×8×8 set of special points was used in the BZ sampling. The lower valence bands are composed of Sr 4p- and O 2s-states (six sheets), whereas the upper valence band is produced mainly by the O 2p-atomic orbitals (nine sheets), see Fig. 9.2. The symmetry of all these valence-band states and the atomic nature of the projected density of states is the same both in these DFT-LCAO and in former DFT-PW calculations [616]. The iterative procedure implemented in CRYSTAL03 code was applied to generate LOs using crystal orbitals of these 15 occupied bands. The Bloch functions for the Γ point of the BZ are taken as the starting LOs. As a result, the iterative procedure gives 15 LOs. Three of them are centered on the Sr

9.1 Theoretical Analysis of Chemical Bonding in Crystals

4.0

a

365

b

3.0 .

Energy, eV

2.0

Total

1.0 0.0 -1.0 -2.0

O: p

-3.0 -4.0 -5.0 -6.0

Zr:d

-7.0

Γ X M

R X M R -6.0 -4.0 -2.0 0.0 2.0 4.0 Energy, eV

Γ k

Fig. 9.2. Electronic structure of SrZrO3 crystal: (a) band structure; (b) total and projected DOS. LCAO DFT calculations [613]

atom and are connected with Sr atom 4p-states. The remaining 12 LOs are connected with the three symmetry-equivalent oxygen atoms in the crystal, four LOs with the centroid positions near each oxygen atom. To analyze the nature of chemical bonding with these LOs, the information about the symmetry of the band states induced from Sr 4p-, O 2s-, and O 2p-states forming two upper valence bands given in Table 9.16 is used. It is seen that these states form a basis of composite BR described in q-basis by the symbol (9.56) (b, t1u ) + (d, a1g + a2u + eu ) Therefore, four LWOs Wi (r) with the centroid positions near each oxygen atom form a basis of a four-dimensional representation a1g + a2u + eu of the site group D4h of the oxygen atom. Let us denote LOs that are the basis functions of these IRs as !2 (r) = W ! (d,eu ) (r), W !3 (r) = W ! (d,a2u ) (r), W !4 (r) = ! (d,eu ) (r), W !1 (r) = W follows: W 1 2 3 (d,a ) 1g ! W (r). Then, instead of (9.50), one has 4 Wi (r) =

4  j=1

!j (r), αji W

i = 1, 2, 3, 4

(9.57)

The starting LWOs of the computer code [23] result in Wi (r) (9.57) with some definite values of the coefficients αji . In this case, Re = eu + a2u + a1g , the representation (+) {Re × Re∗ } = 3a1g +b1g +b2g +eg +eu +a2u contains only one times two irreducible components of the vector representation (eu +a2u ), i.e. there are only two independent parameters in (9.51), 3  r¯i = x ¯si e¯s , x ¯si = Ds α4i αsi (9.58) s=1

where

366

9 LCAO Calculations of Perfect-crystal Properties

!4 (r)|x1 |W !1 (r) = D2 = 2 W !4 (r)|x2 |W !2 (r) , D1 = 2 W

!4 (r)|x3 |W !3 (r) D3 = 2 W (9.59) In Table 9.17 the Cartesian coordinates x ¯si of centroid positions and the polarization fractions Pi for LWOs Wi (r) evaluated by the computer code [23] are given. It is evident (see (9.58)) that the other choice of the starting LWOs can, in principle, give other centroid positions and other values of Pi . Let us note that the BR (d, a1g +a2u ) is Table 9.17. Centroids positions (x1i , x2i , x3i ), in a.u., and polarization fractions pi for functions Wi (r) in the SrZrO3 crystal localized according to the Wannier–Boys mixed scheme [63] Wi W1 W2 W3 W4

x1i –0.039 0.465 –0.211 –0.215

x2i 0.465 –0.039 –0.211 –0.215

x3i –0.002 –0.002 0.774 –0.769

pi 0.999 0.999 0.610 0.612

a composite one. The points on the line binding Zr and O atoms (Wyckoff position e) have the site-symmetry C4v . The IR a1 of this group induces in the group D4h (the site symmetry group of the oxygen atom) the representation a1g + a2u : a1 (C4v ) ↑ D4h = a1g + a2u (D4h ). Therefore, instead of (9.56) one can write another symbol in q-basis (b, t1u ) + (d, eu ) + (e, a1 ) (9.60) for the same BR corresponding to the 15-sheeted band chosen. Note that the IR a1 of C4v induces also the representation a1g + eg + t1u of the site group Oh of the Zr atom – the second atom on the bond line Zr–O: a1 (C4v ) ↑ Oh = a1g + eu + t1u (Oh ). Thus, one can attribute one more symbol in the q-basis to the BR corresponding to the same 15-sheeted energy band, (b, t1u ) + (d, eu ) + (a, a1g + eg + t1u )

(9.61)

It is seen that the part (b, t1u ) + (d, eu ) is common for three symbols (9.56)–(9.60)– (9.61) of the BR under consideration. They correspond to LWOs, localized on Sr and oxygen atoms. The rest of the BR is given in three different ways by its labels (9.56)(9.60)-(9.61). The symmetry considerations show that it is possible to generate from the states of valence bands of the SrZrO3 crystal the LWOs centered on zirconium and on oxygen atoms. These LWOs form the bases of reducible representations of the site groups of Zr and O atoms, a1g + eg + t1u of Oh and a1g + a2u of D4h , respectively. Linear combinations of functions of any of these bases are equivalent from the grouptheoretical point of view, but will give different values for the numerical characteristics of chemical bonding (9.52)–(9.55). However, there is only one possibility to reconcide these two bases. Both bases are induced from the same IR a1 of the common subgroup C4v (the site group of the Wyckoff position e on the bond line Zr–O) of the groups Oh and D4h . The BR with q-basis (9.60) corresponds to a particular choice of the linear !j (r) (9.57): two of them are transformed according to the IR combinations of W

9.1 Theoretical Analysis of Chemical Bonding in Crystals

367

! (e,a1 ) W +

eu of =  the site group (D4h ) of the oxygen atom, the linear combination ! (d,a1g ) + W ! (d,a2u ) of two others engenders the LWO sited on the bond line √1 W 2 Zr–O and transforming according to IR a1 of the symmetry groupC4v of the bond. ! (e,a1 ) = √1 W ! (d,a2u ) centered on the ! (d,a1g ) − W This LWO induces another one W − 2 Zr–O bonding line but at the other side of the same oxygen atom. On the whole, the number of LWOs per unit cell remains the same. These functions describe the covalent bonding of the oxygen atom with its two neighboring Zr atoms. The numerical value of covalency can be evaluated from the centroid positions of these LWOs counted off the oxygen atom. !i (r) it is sufficient to symmetrize the To find the centroid positions of the LWOs W !i (r) calculated without symmetry by the usual group-theoretical methods. LWOs W Instead of extracting the LWO s themselves from the results of computer code [23] application it was done in [612] by using the relation (9.58) with the normality condition and the orthogonality of the matrix α in (9.58) connecting the symmetrized LWOs and those found in the direct calculations. This matrix was found in numerical form and analyzed in [612]. It was found that LWOs Wi (r), i = 1, 2 almost coin! (d,a1g ) (r). ! (d,eu ) (r) although they have a noticeable admixture of LWO W cide with W i (d,a2u ) (d,a1g ) ! ! LWOs Wi (r), i = 3, 4 are formed essentially by W (r) and W (r) although ! (d,eu ) (r). Using (9.59), one obtains they have a noticeable admixture of LWO W ! (d,ag ) (r)|x3 |W ! (d,a2u ) (r) = 0.912. The centroid positions relative to oxygen atoms W !i (r)(i = 1, 2, 3, 4), r − r 0 = 0 and the corresponding polarization fracfor the LWOs W ! (d,eu ) (r) and W ! (d,eu ) (r), P = 1. tion Pi = 1 for all four LWOs. In particular, for W 1 2 They describe lone pairs on the oxygen atom in the crystal. But for the linear com! (e,a1 ) (r) (the IR a1 of the site group C4v of the Wyckoff position e on binations W ± the bond line Zr–O), r ± − r 0 = ±0.912e3 (in a.u.) and the polarization fractions P± = 0.54. These LWOs describe the partly covalent binding of atoms O and Zr in the crystal SrZrO3 . The other numerical characteristics (9.53) and (9.54) of this bond are: Q(O) = −1.54, Q(Zr) = −0.46, IO−Zr = 0.54, KO−Zr = 0.46. Taking into account the choice of valence and semicore electrons, atomic cores have the charges: +6(O), +8(Sr), +4(Zr). According to the q-basis index of the BR (9.60) the electron structure of the crystal can be represented by 15 LWOs per primitive cell, every orbital being occupied by two electrons: ! (b,t1u ) (r) of symmetry t1u (p-type) are localized on Sr (site 1. Three orbitals W group Oh ) and bring to it the charge –6. Finally, atom Sr has in the crystal the charge +2=8–6 rigorously. This value is close to that found by population analysis with WTAOs. ! (d,eu ) (r) of symmetry eu (px , py -type) are localized on O atoms 2. Six orbitals W (site group D4h , three atoms per primitive cell) and bring to every atom the charge –4. ! (e,a1 ) (r) of symmetry a1 (spz -type) are localized on the bonding 3. Six orbitals W line O–Zr (site group C4v , six bonding lines per primitive cell). The charge –2 associated with every orbital is partitioned between oxygen (–1.54) and zirconium (–0.46) atoms. As there are two bonds for the oxygen atom, its charge in the crystal is –1.08 (=+6-4-1.54 × 2). Equally for the zirconium atom, one has +1.24(=+4–0.46 × 6; 6 bonds for Zr). The traditional Mulliken population analysis gives values –1.29 and

368

9 LCAO Calculations of Perfect-crystal Properties

+2.02, the projection techniques –1.14 and +1.63, WTAO population analysis gives more ionic charges –1.67 +3.00, [611]. Using the symmetry analysis in MgO crystal [612] for the Bloch states of the four upper valence bands one obtains the q-basis of symmetry (a, a1g + t1u )

(9.62)

with the oxygen atom in the Wyckoff position a. Electronic states of these energy bands are originated certainly from 2s, 2p-O atomic states. The points on the bond line of the atoms Mg and O (Wyckoff position e) have the symmetry C4v . Even the one-dimensional IR a1 of this group induces in the group Oh the six-dimensional representation a1 (C4v ) ↑ Oh = a1g + eg + t1u (Oh ). This means that there exists no LWO centered on this bond that could generate a four-sheeted upper valence energy band in the MgO crystal. One can say the same about the LWOs centered on the Wyckoff position f (x,x,x) with site group C3v : they could engender an eight-sheeted energy band. Therefore, there is no other alternative but (9.62) for the BR corresponding to valence bands in the MgO crystal. For a reasonable interpretation of bonding in the !1 (r) = W ! (a,a1g ) (r), W !i (r) = W ! (a,t1u ) (r), i = 2, 3, 4 are crystal only the functions W 1 (O) suited. They are centered on an oxygen atom and r i = r O , Qi = −2, Ii = Pi = 1, Ki = 0(i = 1, 2, 3, 4). The centroid positions and the values of other numerical characteristics of chemical bonding are not changed evidently for any linear combi!i (r), i = 1, 2, 3, 4 in the space of IR t1u . The charges on nation of the functions W atoms are: +2(Mg), –2(O) strongly. Such a picture of chemical bonding in MgO crystal corresponds to the accepted one for this ionic system. Nevertheless, it is necessary to introduce such numerical characteristics of LWOs that could describe the small covalent part of Mg-O bonding and relative change of this part in the row MgO– CaO–SrO–BaO. This discussion demonstrates the importance of the symmetry analysis in the procedure of the generation of LWOs in crystals. The theory of space group BR gives a powerful tool to determine the centroid positions of LWOs. (1) If this centroid is at the symmetry point in the direct lattice, its position is defined exactly by the BR theory. If this position is occupied by an atom, the corresponding LWO describes an ionic bond or a lone pair. This is the case for the ! (d,eu ) and W ! (d,eu ) in the SrZrO3 crystal. If it is a MgO crystal and the LWOs W 1 2 middle point between two atoms, the corresponding LWO describes a pure covalent bond. This is the well-known example of the Si crystal. (2) If the centroid is located on a symmetry line (possible site groups are C6v , C4v , C3v , C2v , C6 , C4 , C3 , C2 ), its exact position cannot be defined by the BR theory, and numerical calculations are necessary. The corresponding LWO describes a ! (e,a1 ) (site group C4v ) two-atom partly covalent bond. This is the case of the LWO W in the SrZrO3 crystal with the following numerical characteristics of the bond: IO−Zr = PO−Zr = 0.54, KO−Zr = 0.46, Q(O) = −1.54, Q(Zr) = −0.46

(3) If the centroid is located at a symmetry plane (possible site group is Cs ), its exact position cannot be defined by the BR theory, and numerical calculations are also necessary. The corresponding LWO describes a three-(and more)-atom bond.

9.1 Theoretical Analysis of Chemical Bonding in Crystals

369

As we saw in the example of SrZrO3 crystal the absolute atomic-charge values differ in the different approaches to their calculation. Do different approaches (including those based on PW calculations) reproduce correctly at least the relative changes in the chemical bonding in crystals with analogous structure? This point is discussed in the next section. 9.1.6 Projection Technique for Population Analysis of Atomic Orbitals. Comparison of Different Methods of the Chemical-bonding Description in Crystals At present, the electronic structure of crystals, for the most part, has been calculated using the density-functional theory in a plane-wave (PW) basis set. The one-electron Bloch functions (crystal orbitals) calculated in the PW basis set are delocalized over the crystal and do not allow one to calculate the local characteristics of the electronic structure. As a consequence, the functions of the minimal valence basis set for atoms in the crystal should be constructed from the aforementioned Bloch functions. There exist several approaches to this problem. The most consistent approach was considered above and is associated with the variational method for constructing the Wanniertype atomic orbitals (WTAO) localized at atoms with the use of the calculated Bloch functions. Another two approaches use the so-called projection technique to connect the calculated in PW basis Bloch states with the atomic-like orbitals of the minimal basis set. The first approach (A) consists in using the technique for projecting the Bloch functions calculated in the PW basis set onto atomic orbitals of the minimal valence basis set for free atoms [617, 618]. Within this procedure the atomic-like functions are generated using the pseudopotentials chosen for the PW band structure calculations. Such functions are neither orthonormal nor complete in the sense of spanning the space of the occupied states. To measure how completely the localized atomic orbitals represent the eigenstates a so-called spilling parameter is introduced, which varies between one and zero. If the spilling parameter is nonzero a special projection procedure is needed to correctly define the density-operator for the incomplete basis of atomic-like functions. Since this constructed localized basis is not orthogonal, as in the case of LCAO calculations both Mulliken and L¨ owdin schemes may be used. The second approach (B), proposed for constructing quasiatomic minimal basis orbitals (QUAMBO) in [609] is also closely related to the projection technique (being in fact a projection reverse to the first one): the projection of a given minimal atomic basis is made on the Bloch states obtained in the PW calculations. This method can be regarded as a sort of localization procedure, and it describes the electronic structure of periodic solids in terms of localized quasiatomic minimal basis orbitals (QUAMBO). Both variants of the projection technique were used for calculations of the local characteristics in the bulk of crystals [601, 609, 618] and, in a number of cases, led to results that are rather difficult to explain from the chemical standpoint. For example, the calculated charge of Mg atom in the ionic crystal MgO equals 0.76 [601]. Note that the construction of the WTAOs from the Bloch functions obtained in the PW basis set permitted almost ionic charges at atoms in the MgO crystal to be derived, see Table 9.14. However, it should also be noted that comparison of the data available

370

9 LCAO Calculations of Perfect-crystal Properties

in the literature on different characteristics obtained by the projection technique is complicated because the crystal orbitals are calculated with different variants of the DFT method, different pseudopotentials for excluding the core electrons from consideration, different atomic basis sets, etc. In order to interpret the results obtained by the projection technique, it is necessary to perform a comparative analysis of the density matrices (in the atomic orbital basis set) determined by the two aforementioned projection variants. In [619] such an analysis is carried out for the first time, and a simplified version of technique B was proposed to avoid cumbersome calculations of a large number of vacant crystal orbitals. Thus, in both variants A and B of the projection technique when the atomic orbital set for free atoms or free ions is assumed to be known, the population analysis can be carried out without invoking vacant crystal orbitals. We refer the reader for the mathematical details of this analysis to the publications [611, 619]. Here, we discuss only the numerical results, obtained in these studies for the local properties of electronic structure of crystals in both projection techniques and compare them with those obtained in traditional AO and WTAO Mulliken population analysis, including Bloch functions of vacant states. The comparison is also made with the results obtained with localized Wannier functions, generated only for the valence bands by method [63]. In Table 9.18 we give the local properties of electronic structure (atomic charges QA , covalencies CA , bond orders WAB and overlap populations RAB ) calculated by projection techniques A and B for the crystals with different nature of chemical bonding: Si, SiC, GaAs, MgO, cubic BN, and TiO2 with a rutile structure, R0 is the nearest-neighbor distance, given in ˚ A. Table 9.18. Local properties of electronic structure in projection technique, [619] Crystal R0 MgO BN TiO2 Si SiC GaAs

2.107 1.565 1.951 2.364 1.901 2.451

QA A 1.609 0.681 1.730 0.000 1.260 0.361

B 1.607 0.715 1.739 0.000 1.284 0.380

CA A 0.630 3.292 3.474 3.823 3.497 3.231

B 0.632 3.263 3.459 3.801 3.472 3.202

spl (10−3 ) A B 1.4 1.1 3.7 3.0 2.2 1.4 9.6 6.5 8.9 5.3 1.8 1.8

WAB A B 0.112 0.113 0.804 0.800 0.552 0.550 0.894 0.889 0.831 0.827 0.768 0.765

RAB A B 0.095 0.096 0.709 0.700 0.305 0.302 0.756 0.744 0.760 0.751 0.636 0.629

The crystal orbitals were calculated by the DFT method in the plane-wave basis set with the CASTEP code [377] in the GGA density functional. A set of special points k in the Brillouin zone for all the crystals was generated by the supercell method (see Chap. 3) with a 5 × 5 × 5 diagonal symmetric extension, which corresponds to 125 points. In all cases, the pseudopotentials were represented by the normconserving optimized atomic pseudopotentials [621], which were also used to calculate the atomic potentials of free atoms. In the framework of both techniques (A, B), the population analysis was performed in the minimal atomic basis set; i.e. the basis set involved only occupied or partially occupied atomic orbitals of free atoms. It is well known that the inclusion of diffuse vacant atomic orbitals in the basis set can substantially change the results of the population analysis. For example, if the Mg 2p vacant atomic orbitals are included in the basis set, the charge calculated by technique A for the Mg

9.1 Theoretical Analysis of Chemical Bonding in Crystals

371

atom in the MgO crystal decreases from 1.61 to 1.06. Consequently, the inclusion of the Mg 2p functions leads to a considerable decrease in the ionic component of the bonding and, correspondingly, to an increase in the covalence of atoms. Chemically, it is difficult to explain this high covalency of the bonding in the MgO crystal. The spilling parameter spl values are also given in Table 9.18, which characterize the accuracy of the projection of occupied crystal orbitals onto the space of the atomic orbitals (technique A) and the accuracy of the projection of atomic orbitals onto the Bloch functions (technique B). The atomic charges obtained by technique A can be compared with those calculated in [601] with the use of a similar method. The atomic charges and the spilling parameters presented in [601] are considerably smaller than those in the calculation discussed. In our opinion, the main factor responsible for this disagreement is the difference between the atomic basis sets that are used for the projection. This assumption is confirmed by the following fact noted in [601]. The removal of the Si d vacant orbital from the atomic basis set leads to an increase in the charge at the Si atom in the SiC crystal from 0.66 to 1.25 and an increase in the spilling parameter from 2 × 10−3 to 9 × 10−3 . It follows from Table 9.18 that, in calculations in the minimal basis set (without the Si d function), these quantities are equal to 1.26×10−3 and 8.9 × 10−3 , respectively, which agrees well with the results obtained in [601] (without the Si d function). It is evident that an increase in the size of the basis sets should result in a decrease in the spilling factor in method A, because this is accompanied by an increase in the space of the atomic orbitals onto which the occupied crystal orbitals are projected. However, we believe that it is incorrect to decrease the spilling parameter in the population analysis of the atomic orbitals by increasing the atomic basis sets, as was actually done in [601]. For example, if the basis set of the atomic orbitals is increased to a complete set, the spilling coefficient can be reduced to zero; however, the population analysis of the atomic orbitals in this basis set loses all physical meaning. For the purely covalent cubic Si crystal, the results obtained by technique B can be compared with the data reported in [609], for Si–Si bond order WAB = 0.885 and the Mulliken overlap population is RAB = 0.756. As can be seen from Table 9.18, the results obtained by technique B (WAB = 0.889, RAB = 0.744) are very close to those given in [609]. The insignificant differences can be associated with the use of different variants of the DFT method in the plane-wave basis set. Note that technique B used in [619] is a simpler modified variant of the method proposed in [609] and does not deal with the vacant Bloch states. It can be seen from Table 9.18 that the data calculated by the techniques A and B are in good agreement. It should only be noted that the ionic component of the bonding (QA ) in technique B is somewhat larger than the analogous component in technique A. Correspondingly, the covalent component (CA , WAB , RAB ) is somewhat smaller in technique B. Moreover, the spilling parameters in technique B are regularly smaller in magnitude. In Table 9.19 we compare the local characteristics of the electronic structure determined for the TiO2 crystal with the use of the projection technique and those obtained in an earlier study [623], in which the Wannier-type atomic functions of the minimal valence basis set of titanium and oxygen atoms were constructed by the variational method. In [623], the Bloch functions were calculated by the DFT method

372

9 LCAO Calculations of Perfect-crystal Properties

Table 9.19. Local characteristics of the electronic structure of the TiO2 (rutile) crystal* Method A B LCAOM LCAOL WTAOM WTAOL

QTi 1.79 1.80 1.78 1.04 1.98 1.92

CTi 3.36 3.34 3.30 4.29 3.16 3.23

WTi−O 0.51 0.51 0.52 0.66 0.51 0.52

VTi 4.13 4.12 4.08 4.52 4.11 4.12

*LCAOM(L) – traditional Mulliken (L¨ owdin) population analysis with basis set used in LCAO calculations; WTAOM(L) – Mulliken (L¨ owdin) population analysis with WTAO basis set

in the LCAO approximation with the CRYSTAL code [23] and the atomic pseudopotentials taken from [484]. It follows from Table 9.19 that the local characteristics of the electronic structure of the TiO2 crystal are close for two projection variants (techniques A, B) and differ only slightly from the results of the Mulliken (not L¨ owdin!) population analysis performed in the basis set of the atomic orbitals at the LCAO level. It is seen that the traditional L¨ owdin population analysis with the initial LCAO basis set containing diffuse atomic functions leads to an overestimated covalence of chemical bonding. When analyzing the populations in the WTAO basis set, the L¨ owdin orthogonalization of the basis set leads to insignificant differences as compared to the results of the Mulliken population analysis (due to the localized character of the Wannier-type atomic functions). The L¨ owdin atomic charges and the atomic covalences correspond to a somewhat lower degree of ionicity. An important conclusion can be drawn from comparison of WTAO results with those obtained in the projection technique: despite the use of substantially different basis sets for calculating the crystal orbitals (plane waves in the projection technique, LCAO in the WTAO method), the local characteristics of the rutile electronic structure obtained within the two approaches are in good agreement. Meanwhile, the results of traditional population analysis differ from those obtained by the projection technique (see Table 9.19). This difference is demonstrated also in Table 9.20, where for SrTiO3 and SrZrO3 crystals the results of traditional Mulliken population analysis are compared with those obtained by the projection technique (both crystals were taken in cubic perovskite structure with the space group P m3m. The results, given in Table 9.20, were obtained by the DFT PBE method in LCAO and PW calculations (the details of the LCAO basis set and other parameters choice can be found in [611]). In the projection technique the atomic orbitals were numerically calculated for occupied states of free atoms using the same pseudopotentials as in the PW band-structure computations. As can be seen in Table 9.20, the results of projection-techniques application, unlike the traditional population analysis, exhibit the correct trends in the chemical-bonding change when the Ti atom is replaced by the Zr atom in the same structure (the experimental lattice constants were used for both cases). The population analysis based on the projection technique shows that ionicity of chemical bonds M–O (M= Ti, Zr) in SrZrO3 is larger than in SrTiO3 . This is in agreement with the experimental data on the bandgaps in SrTiO3 (3.2

9.1 Theoretical Analysis of Chemical Bonding in Crystals

373

Table 9.20. Local properties of electronic structure of SrMO3 crystals (M=Ti, Zr) in Mulliken population analysis, projection techniques and WTAO population analysis [611] Quantity

Q(Sr) Q(M) Q(O) WSr−O WM−O

Mulliken LCAO SrTiO3 SrZrO3 1.85 1.85 2.24 2.02 –1.36 –1.29 0.036 0.033 0.461 0.496

Projection A PW SrTiO3 SrZrO3 1.83 1.80 1.46 1.63 –1.09 –1.14 0.025 0.026 0.626 0.607

Projection B WTAO PW LCAO SrTiO3 SrZrO3 SrTiO3 SrZrO3 1.83 1.80 2.00 2.00 1.46 1.63 2.54 3.00 –1.09 –1.14 –1.51 –1.67 0.026 0.027 0.00 0.00 0.663 0.606 0.389 0.269

eV) and SrZrO3 (5.9 eV) and the relative Pauling electronegativities of Ti (1.4) and Zr (1.2) atoms. Both variants of the projection approach give very close results for the local properties of electronic structure, possibly because the projection method A produces almost orthogonal crystalline orbitals. From Table 9.20 one can conclude that the traditional Mulliken population analysis within the framework of LCAO calculations does not correctly reproduce the relative ionicity of chemical bonding in SrTiO3 and SrZrO3 crystals, while the WTAO-based populations and projectiontechniques application allows one to reflect properly the more ionic nature of SrZrO3 in comparison with SrTiO3 . Table 9.21 gives the localization indices of Wannier functions in SrTiO3 and SrZrO3 crystals calculated for the valence bands by the method used in [63]. Table 9.21. Localization indices of localized Wannier functions in SrTiO3 and SrZrO3 crystals [611] Crystal LWF Wi (r) SrTiO3 a (i=1) b (i=2) c (i=3) d (i=4) SrZrO3 e (i=1) f (i=2) g (i=3) h (i=4)

λi 1.145 1.145 1.252 1.230 1.183 1.183 1.302 1.300

pi 0.978 0.978 0.627 0.670 0.999 0.999 0.610 0.610

qO 0.934 0.934 0.890 0.890 0.918 0.918 0.870 0.870

qOs 0.191 0.191 0.311 0.296 0.136 0.136 0.343 0.341

qOpx 0.731 0.011 0.064 0.117 0.005 0.778 0.064 0.066

qOpy 0.011 0.731 0.064 0.117 0.778 0.005 0.064 0.066

qOpz 0.002 0.002 0.453 0.373 0.000 0.000 0.403 0.400

Localized Wannier functions (LWFs) have been calculated for three upper valence bands in SrTiO3 and SrZrO3 , represented mainly by O 2p, Sr 4p, and O 2s atomic states (in the case of SrZrO3 the last two bands overlap considerably). A total of 15 crystalline orbitals have been used to generate, correspondingly, 15 LWFs per primitive unit cell: in both crystals under consideration, three oxygen atoms occupy the same Wyckoff positions, and four LWFs can be attributed to each oxygen atom. It was found by calculations with CRYSTAL03 code [23] that the centroids of four functions are positioned near the center of one oxygen (at distances of about 0.3 ˚ A).

374

9 LCAO Calculations of Perfect-crystal Properties

Table 9.21 presents the following localization indices: the Mulliken population of LWF (9.46) qO due to the oxygen atom and corresponding contributions from 2s and 2poxygen functions. The atomic delocalization index of LWF λi =

"

 A

g

g 2 (qAi )

#−1

(9.63)

is a measure of the extent of the LWF in terms of the number of “contributing” atoms. This index is close to 1.0 for much localized LWF, and it is > 1.0 for more diffuse LWFs. The polarization fraction, (9.49) for all LWFs is also given. Figure 9.3 presents the fragment of crystal containing four primitive unit cells to show the axes orientation: the oxygen atom is positioned in the center and the two nearest Ti or Zr atoms lie on the z-axis. The counter density maps of the obtained LWFs are shown in Fig. 9.4. As is well seen from Fig. 9.4 and Table 9.21 (functions a, b and e, f) two of the four LWFs for each crystal are perpendicularly oriented toward the M–O–M line and lie along x- (Fig. 9.4, a and e) and y- ( Fig. 9.4, b and f) axes, respectively.

Fig. 9.3. Local environment of oxygen atom in cubic perovskites SrMO3 (M= Ti, Zr).

The polarization fractions of LWFs a, b for SrTiO3 and e, f for SrZrO3 are very close to 1.0; i.e., these LWFs practically represent the electron lone pairs of oxygen ions O2− with a predominant contribution of oxygen 2px - and 2py -orbitals. Two other LWFs (see Fig. 9.4 c, d, g and h) are directed along the z-axis. As can be seen from the populations (Table 9.21), they closely correspond to hybrid spz orbitals of oxygens. The polarization fractions are substantially less than 1.0 for these two orbitals, revealing the rather strong covalent character of Ti (Zr)–O bonds in both crystals (these covalency effects are well known for transition-metal–oxygen compounds). Thus, localized Wannier functions, generated with the inclusion of only the valenceband states, appear to be a useful tool in analyzing the electronic distribution and

9.2 Electron Properties of Crystals in LCAO Methods Sr Sr

Sr

9

9

a

9

9

e Sr

Ti Zr

OO OO

9

f Sr Sr

d Ti Zr

Sr O Sr O

O O

9

g Sr O

O

9

c

Sr Sr Sr Sr

Ti

OO

9

b

Sr Sr

Ti

Sr O

375

h Zr

OO

Zr

O

Fig. 9.4. Localized orbitals for oxygen atom in cubic SrTiO3 (a,b,c,d) and SrZrO3 (e,f,g,h). Functions a,b,e,f in Sr-plane; functions c,d,g,h in MO plane (M= Ti, Zr)

chemical bonds in solids. It should be noted that the LWFs obtained are not entirely symmetry-agreed: they do not transform via the representations of the oxygen atom site-symmetry group under the point-symmetry operations because there is no explicit symmetry constraints in the localization procedure [63]. Further symmetrization of WTAOs is desirable to correlate the results with those qualitatively known in quantum chemistry. This symmetrization procedure was discussed in Sect. 9.1.5 and allows the LWFs centered on oxygen atoms and transforming over eu and a1u irreducible representations of the oxygen site-symmetry group D4h to be obtained. The symmetrization of LWF is considered in general form in [109]. Concluding this section we note that the projection technique with PW calculations gives reasonable results for local properties of electronic structure, close to those obtained in LCAO calculations after using WTAO population analysis. In general, WTAO results correspond to the more ionic bonding. The useful information about the atomic nature of the band states is obtained in the PW calculations of solids from the orbital and site decompositions of the densities of states (DOS). As an example, we refer to the DFT PW calculations [620] of transparent conductive oxides In4 Sn3 O12 and In5 SnSbO12 – complicated rhombohedral structures with 19 atoms in the primitive unit cell. It was found by DOS analysis that the tops of the valence states of both materials are formed by oxygen 2p states, whereas the bottom of the conduction bands are due primarily to the Sn 5s electrons. For such crystals LCAO calculations with a posteriori WTAO generation or the projection technique application would be very cumbersome. The analysis of DOS and other one-electron properties of crystals in the LCAO calculations is discussed in the next section.

9.2 Electron Properties of Crystals in LCAO Methods 9.2.1 One-electron Properties: Band Structure, Density of States, Electron Momentum Density The local properties of chemical bonding in crystals considered above are defined by the electron-density distribution in real space described by a one-electron density

376

9 LCAO Calculations of Perfect-crystal Properties

matrix (DM), see (4.125)-(4.127). The latter is calculated self-consistently for the finite set of L discrete k-points in BZ and corresponds to the cyclic cluster of L-primitive unit cells modeling the infinite crystal: M

ρµν (Rn ) =

L

1  ∗ exp(−ikRn )Ciµ (kj )Ciν (kj )ni (kj ) L i=1 j=1

(9.64)

The total number of bands M in (9.64) equals the number of AOs associated with the primitive unit cell. The one-electron energy levels form energy bands consisting of L levels in each band. Therefore, each energy band can allocate 2 × L electrons; if in the unit cell there are n electrons, and the bands do not cross, the lowest n/2 bands are occupied and are separated from the empty bands. In this case the occupation numbers in (9.64) are ni = 2, 0 for the occupied and empty bands, respectively (insulators and semiconductors). However, if n is odd, or if the valence and conduction bands cross, more than n/2 bands are partially occupied (metal). The eigenvalue spectrum of an infinite periodic system does not consist of discrete energy levels as the wavevector k changes continuously along the chosen direction of the BZ. The DM of an infinite crystal is written in the form where the summation over the discrete k-vectors of the BZ is replaced by the integration over the BZ. In the LCAO approximation written for the cyclic-cluster (4.126) for DM in the coordinate space is replaced by ρµν (Rn ) =

M 

ρ(i) µν (Rn )

i=1

= (i)

M  1 

VBZ

i=1BZ

∗ exp(−ikRn )Ciµ (k)Ciν (k) (εF − εi (k)) dk

(9.65)

where ρµν (Rn ) is the contribution of the ith energy band. For the infinite crystal at each cycle of the SCF process, an energy εF (the Fermi energy) must be determined, such that the number of one-electron levels with energy below εF is equal to the number of electrons (or, in other words, the number of filled bands below εF is equal to half the number of electrons in the unit cell). The Fermi surface is the surface in reciprocal space that satisfies the condition εi (k) = εF . By limiting the integration over the BZ to states with energy below εF , a Heaviside step function θ(εF − ε) excludes the empty states from the summation over the energy bands. In fact, the band structure of the infinite crystal is obtained after the cycliccluster self-consistent calculation by the interpolation of the one-electron energy levels considered as continuous functions ε(k) of the wavevector. The band structure of solids is an important feature, defining their optical, electrostatic and thermal properties. Both the electron charge distribution and the band structure are defined by the selfconsistent DM of a crystal. As we have seen, two binary oxides – MgO in sodium chloride structure and TiO2 in rutile structure (see Chap. 2 for descriptions of these structures) – differ significantly in the character of chemical bonding, which is due to the electron-density distribution being much different in them. We discuss now the differences in the band structures of these crystals.

9.2 Electron Properties of Crystals in LCAO Methods

377

The electronic structures of both compounds have been well studied experimentally. The experimental data show that the MgO crystal is a wide-bandgap insulator (Eg = 7.8 eV ); titanium dioxide TiO2 in the rutile structure is a semiconductor with an experimental bandgap of approximately 3 eV. These differences are reproduced in the band strucrure of these two binary oxides, calculated in [623] by HF and LDA LCAO methods and shown in Figures 9.5 and 9.6, respectively. The details of the AO basis-set choice and BZ summation can be found in [623].

a

Energy, a.u.

2.00 1.50 1.00 0.50 0.00 EF -0.50

L

Γ

X W Mg:s k

O:p total

DOS

b

2.00

Energy, a.u.

O:s

1.50 1.00 0.50 0.00 EF -0.50

L

Γ

X W Mg:s k

O:s

O:p total

DOS

Fig. 9.5. Band structure and DOS of MgO crystal, [623]: (a) HF LCAO method; (b) DFT(LDA) LCAO method

In MgO (in accordance with the results of other calculations), the two highest valence bands are the oxygen s- and p-like bands, respectively, whereas the conduction bands are more complicated. The upper valence bands in TiO2 are also oxygen s-

378

9 LCAO Calculations of Perfect-crystal Properties

a 1.00

Energy, a.u.

0.50

0.00 EF

-0.50

-1.00

0

Γ ;

b

5 = k

$ Ti: G O:V O:S total DOS

Energy, a.u.

0.50

0.00 EF

-0.50

0

Γ ;

5 = k

$ Ti: G O:V O:S total DOS

Fig. 9.6. Band structure and DOS of rutile TiO2 crystal, [623]: (a) HF LCAO method; (b) DFT(LDA) LCAO method

and p-like bands; however, they consist of 4 and 12 sheets, respectively, because the primitive cell of titanium oxide contains four oxygen atoms. The lowest conduction band in TiO2 consists of 10 branches formed by 3d-states of two titanium atoms and is noticeably separated in energy from the upper conduction bands. The symmetry of the one-electron states can be found using the BR theory of space groups and data on the crystalline structures (see Chap. 3). Evidently the symmetry of band states does not depend on the basis choice for the calculation (LCAO or PW); the change of basis set can only make changes in the relative positions of one-electron energy levels.

9.2 Electron Properties of Crystals in LCAO Methods

379

An important parameter in the band theory of solids is the Fermi-level energy (see Figures 9.5 and 9.6), the top of the available electron energy levels at low temperatures. The position of the Fermi level in relation to the conduction band is a crucial factor in determining electrical and thermal properties of solids. The Fermi energy is the analog of the highest-occupied MO energy (HOMO) in molecules. The LUMO (the lowest unoccupied MO) energy in molecules corresponds to the conduction-band bottom in solids. The HOMO-LUMO energy interval in a solid is called the forbidden energy gap or simply bandgap. Depending on the translation symmetry of the corresponding Bloch states the gap may be direct or indirect. In HF and LDA calculations of both crystals under consideration the bandgap is direct, i.e. the one-electron energies at the top of the valence band and the bottom of the conduction band belong to the same Γ -point of the BZ (this result agrees both with the experiment and other band-structure calculations). It is seen that the HF bandgap in both crystals is essentially overestimated and decreases in LDA calculations mainly due to the lowering of the conduction-band bottom energy (see Chap. 7). The influence of the correlation effects on the valence-band states is smaller. It is also seen that the oxygen 2p bandwidth in MgO is smaller than that in TiO2 . The bandwidth is a measure of dispersion in the k-space and depends on the magnitude and the range of interactions within the crystal: for the more covalent rutile crystal the oxygen-oxygen interactions are stronger. The core bands of both crystals (not shown on the figures) are separated by a large energy gap from the valence bands and are completely flat due to the high localization of core states near the atomic nuclei. The Fermi energy of a crystal with n electrons in the primitive unit cell is defined from the condition εF εF  M εF   1 n=2 n(ε)dε = ni (ε)dε (9.66) θ(ε − εi (k))dk = VB i i=1 −∞

−∞

BZ

−∞

where n(ε) is the total density of states (DOS) per unit energy. DOS is an important quantity calculated for crystals. The total DOS can be expressed as the sum of contributions ni (ε) from individual energy bands, see (9.66). The total DOS definition is independent of the basis set choice (PW or LCAO); the product ni (ε)dε defines the number of states with energy in the interval dε. Each energy band spans a limited energy interval between the minimal and maximal one-electron energies εmin , εmax /ε so that εmax n(ε)dε gives DOS in the corresponding energy interval. min The connection between the electronic structure of a crystal and the one-electron states of the constituent atoms is given by the projected density of states (PDOS), associated with the separate AOs, their shells or individual atoms. Let us rewrite the total DOS as M  M  1  n(ε) = ni (ε) = f i (k)δ(ε − εi (k))dk (9.67) V B i=1 i=1 BZ

The weighting function f

(i)

f

(k) in (9.67) chosen as

(i)

∗ (k) = Ciµ (k)Ciν (k) exp(−ikRn )

(9.68)

380

9 LCAO Calculations of Perfect-crystal Properties

defines PDOS associated with AO µ in the reference cell and AO ν in the cell with the translation vector Rn . After summation over band index i and integration up to εF PDOS (9.68) gives the density matrix elements (9.65). According to Mulliken population analysis, the DOS projected onto a given set of AOs {λ} (belonging to the given shell or to the whole atom), is defined by the weight function   (i) ∗ f{λ} (k) = Ciµ (k)Ciν (k)Sµν (k) (9.69) µ∈{λ} ν

where the overlap integral Sµν (k) is defined by (4.123). Let the set {λ} consist of one AO from the reference cell. The summation of (9.69) over the direct lattice translations Rn and integration over BZ gives the orbital DOS  1  ∗ nµ (ε) = Ciµ (k)Ciν (k) exp (ikRn ) Sµν (k)δ(ε − εi (k))dk (9.70) VBZ i ν Rn BZ

The DOS of an atom A nA (ε) and the total DOS ntot (ε) are caluculated from the orbital DOS:   nA (ε) = nA (ε) (9.71) nµ (ε); ntot (ε) = A

µ∈A

The total DOS and PDOS give rich information on the chemical structure of a system, connecting the calculated band structure with the atomic states. We demonstrate this by considering total and projected DOS for binary oxides MgO, TiO2 and ternary oxides SrTiO3 and SrZrO3 with cubic perovskite structure (see Figures 9.5–9.8).

a

b Total

Total

O: 2p

O: 2p

O: 2s

O: 2s

Ti: 3d (x 5.00)

Zr: 3d (x 5.00)

Sr: 4p

Sr: 4p

-20.0 -15.0 -10.0 -5.0

Energy, eV

0.0

5.0

-20.0 -15.0 -10.0 -5.0

0.0

5.0

Energy, eV

Fig. 9.7. Full and partial DOS in (a) SrTiO3 and (b) SrZrO3 crystals

The analysis of total and partial DOS demonstrates that in all the oxides under consideration the upper valence band is predominantly formed by the O 2p states. It

9.2 Electron Properties of Crystals in LCAO Methods

a

b

381

c

12.0 8.0

Energy, eV

4.0 0.0

EF

EF

-4.0 EF -8.0 -12.0 -16.0 -20.0 -24.0 -28.0

Γ

;

0 5 k

Γ

Γ

d

;

0 5 k

Γ

Γ

e

;

0 5 k

Γ

0 5 k

Γ

f

12.0 8.0

Energy, eV

4.0 0.0 -4.0 EF -8.0

EF

EF

-12.0 -16.0 -20.0 -24.0 -28.0

Γ

;

0 5 k

Γ

Γ

;

0 5 k

Γ

Γ

;

Fig. 9.8. Band structure of cubic crystals: (a),(b),(c)–SrTiO3 , (d),(e),(f)–SrZrO3 . HF LCAO method–(a),(d); hybrid HF-DFT(PBE0) LCAO method–(b),(e); DFT(PBE) LCAO method– (c),(f).

can also be seen that Mg 3s, Ti 3d and Zr 4d states make the dominant contribution to the bottom of the conduction band. As is seen from Fig. 9.8, the inclusion of correlation effects moves the valence and conduction bands to the higher and lower energies, respectively, which decreases the bandgap. In more ionic stronzium zirconate the energy bands are narrower than in less-ionic strontium titanate. The ground-state electron-charge density in a crystal can be expressed as  ρ(r) = ρµν (Rn − Rm )χµ (r − Rn )χν (r − Rm ) (9.72) µν Rn Rm

and reproduces the essential features of the electron-density distribution near atomic nuclei and along interatomic bonds. For each r the sums over Rn and Rm are restricted to those direct lattice vectors such that the value of χµ (r − Rn ) and χν (r − Rm ) are nonnegligible.

382

9 LCAO Calculations of Perfect-crystal Properties

The total electron-density maps provide a pictorial representation of the total electronic distribution and are obtained by calculation of the charge density in a grid of points belonging to some planes. More useful information is obtained by considering difference maps, given as a difference between the crystal electron-density and a “reference” electron density. The latter is a superposition of atomic or ionic charge distributions. Fig. 9.9 shows the total and difference maps for Cu2 O crystal, obtained in HF LCAO calculations [622].

Fig. 9.9. Electron-density maps obtained for Cu2 O on a (110) plane, [622]. (a) Total electron density. (b) Density difference maps, bulk minus neutral atom superposition. Values corresponding to neighboring isodensity lines differ by 0.01 e/Bohr3 . The full and broken curves in (b) indicate density increase and decrease, respectively.

Two important quantities that require an integration involving ρ(r) are the electrostatic potential and the electric field, [324]. In particular, maps of the electrostatic potential created by electrons and nuclei at a crystal surface may be useful for gathering information about reaction paths and active sites of electrophilic or nucleophilic chemical processes at the surface. As concerns the electric field, it may be of interest to calculate the electric-field gradient at the location of nuclei with a nonzero nuclear quadrupole moment, since comparison with experimental data is possible in such cases. Three functions may be computed that have the same information content but different use in the discussion of theoretical and experimental results [23]: the electron momentum density itself (EMD) ρ(p); the Compton profile (CP) function J(p); the autocorrelation function, or reciprocal space form factor, B(r). Let χµ (p) be defined as the Fourier transform of AO χµ (r) belonging to atom A  χµ (p) = exp(ipr)χµ (r)dr (9.73) and sµ is the fractional coordinate of atom A in the reference cell.

9.2 Electron Properties of Crystals in LCAO Methods

383

EMD is defined as the diagonal element of the six-dimensional Fourier transform of the one-electron density matrix from coordinate to momentum space:  ρµν (Rn ) exp (−ip(Rn + sµ − sν ))χµ (p)χν (p) (9.74) ρ(p) = µν Rn

The Compton profile function is obtained by 2D integration of the EMD over a plane through and perpendicular to the direction  J(p) = ρ(p + p′⊥ )dp′⊥ (9.75) after indicating with p′⊥ the general vector perpendicular to p. It is customary to make reference to CPs as functions of a single variable p, with reference to a particular direction identified by a vector e = (ha1 + ka2 + la3 )/|ha1 + ka2 + la3 |. We have J (p) = J(pe)

(9.76)

The function J (p) is referred to as directional CPs. The weighted average of the directional CPs over all directions is the average CP. In the so-called impulse approximation, J (p) may be related to the experimental CPs, after correction for the effect of limited resolution [23]. Once the directional CPs are available, the numerical evaluation of the corresponding autocorrelation function, or reciprocal-space form factor, B(r) is given by the 1D Fourier transform: B (r) =

1 π

∞

J (p) exp(ipr)dp

(9.77)

−∞

The structural and electronic properties of Cu2 O have been studied in [622] using the HF LCAO method and a posteriori density-functional corrections. The electronic structure and bonding in Cu2 O were analyzed and compared with X-ray photoelectron spectroscopy spectra, showing a good agreement for the valence-band states. The Fourier transform of the ground-state charge density of a crystalline system provides the X-ray structure factors of the crystal, which can be determined experimentally by X-ray diffraction. To check the quality of the calculated electron density in Cu2 O crystal, structure factors have been calculated in [622], showing a good agreement with the available experimental data, see Table 9.22. 9.2.2 Magnetic Structure of Metal Oxides in LCAO Methods: Magnetic Phases of LaMnO3 and ScMnO3 Crystals The crystalline transition metal oxides TiO2 , SrTiO3 , SrZrO3 considered above are classified as d0 insulators with quite wide bandgap, being diamagnetic with no unpaired electrons. This means that these crystals have no inherent magnetization, but when subjected to an external field develop magnetization that is opposite to the field (the transition atom spins tend to be oriented in the direction opposite to the field).

384

9 LCAO Calculations of Perfect-crystal Properties

Table 9.22. Structure factors for Cu2 O calculated with the periodic HF LCAO method, [622]. Experimental values are obtained from X-ray data hkl 110 111 200 211 220 222 310 311 330 331 332 333 400 411 420 422

Fcalc 13.52 94.78 79.48 9.10 84.34 61.07 6.94 69.22 4.63 55.57 4.39 46.86 65.05 4.80 49.72 53.90

Fexpt 12.42 93.70 78.98 8.53 82.52 59.40 6.56 67.49 4.71 53.78 4.24 45.42 63.09 4.71 48.06 52.18

As we saw in the preceding subsection, the bandgap in d0 insulators is between a filled band of bonding orbitals, with predominately oxygen 2p atomic character, and an empty metal d band of antibonding orbitals. The transition-metal oxides with dn ions (such as NiO, Cr2 O3 , LaMnO3 ) form a class of compounds with the localized “impurity-like” d-levels [624]. These systems are known as Mott–Hubbard or magnetic insulators (exhibit magnetic order in the absence of an external field); their magnetic properties indicate the unpaired electrons expected for the appropriate dn open-shell configuration. d − d transitions in these crystals appear due to the crystal-field splitting and give rise to optical absorptions, with only quite weak perturbations from those expected for isolated dn ions. These oxides have narrow upper valence bands (1–2 eV), because of small overlap between the metal d and oxygen 2p orbitals, so that their local electronic structure can be described in terms of atomic-like states. The fully ionic O2− configuration is not exactly the state of an oxygen atom in a crystal, and O− mobile and correlated configuration (oxygen holes with 2p5 configuration) has to be included. The weak interactions between magnetic moments of dn -ions give rise to magnetic ordering (most commonly antiferromagnetic at low temperatures). At the same time, these compounds are good insulators with bandgaps that may be as large as those in some d0 compounds. Like the latter, however, the magnetic insulators are susceptible to nonstoichiometry, and this may give rise to semiconductive properties and strong optical absorptions. For example, NiO is green and highly insulating when pure, but easily takes up excess oxygen to become black and semiconducting. The magnetic insulators have an the extraordinary range of structures and properties [625] and provide an excellent case study in quantum chemistry of solids. The existence of a magnetic ground state is a many-body effect caused by correlated electron–electron interactions. The need for the inclusion of electron-correlation ef-

9.2 Electron Properties of Crystals in LCAO Methods

385

fects has limited the majority of applications to solids by DFT methods. We noted in Chap. 7 that due to the strong Coulomb correlations DFT methods are in serious trouble for systems with localized electrons as these methods overestimate delocalization of the electron density due to nonexact cancelation of the electron self-interaction. DFT results in many cases are in disagreement with experiment. For example, when the LDA is used to describe the magnetically ordered insulating ground states of NiO, a nonmagnetic metallic state is obtained [626]. Initially, this was thought to be a failure of the one-electron approximation itself, meaning that such highly correlated systems could not be described using band theory. It is now apparent that this is not case [627]: the failure of DFT was due to its approximate treatment of the exchange interaction. Analyzing different approaches, introducing better descriptions of the onsite exchange interactions we concluded in Chap. 7 that LCAO calculations with hybrid DFT functionals can play the same role in quantum chemistry of solids as DFT+U and SIC DFT calculations (with PW and LMTO basis) in solid-state physics. This is demonstrated by the results of recent numerous LCAO (UHF and hybrid DFT) calculations of the properties of magnetic insulators [568]. The magnetic properties of different oxides have been investigated in the LCAO approximation: MO (M=Ni, Mn), [628], M2 O3 (M=Cr, Fe), [629, 630], Mn3 O4 , [631], CuGeO3 , Ag2 Cu2 O3 , [632], high-Tc superconductor parent compounds A2 CuO2 X2 (A=Ca,Sr, X=F, Cl), [633]. The main parameter used to quantify the magnetic properties is the exchange coupling constant between the paramagnetic centers with total spins Si and Sj that is defined through the phenomenological Heisenberg–Ising Hamilˆ tonian with total spin operators S:   ′ ˆ ˆ ˆ =− H S i Sj = − Jij Jij Sˆi Sˆj (9.78) i>j

i=j

The interactions are generally assumed to be limited to nearest neighbors, but the range of interactions can be extended beyond the nearest neighbors (we refer the reader to Chap. 7 in [9] for a detailed discussion of magnetic behavior of solids and the Heisenberg–Ising model). The comparison of calculated exchange coupling constants with those obtained experimentally is, however, not straightforward since experimental data are in most cases obtained from a fitting of the magnetic susceptibility to the expression obtained using a model that includes simplifying assumptions [632]. The latter are adopted to reduce the number of fitting parameters. In this situation the use of theoretical methods to estimate the exchange coupling constants becomes a valuable tool for the experimentalists. We discuss here in more detail the recent applications of LCAO methods to the LaMnO3 and ScMnO3 crystals, two representatives of the rare-earth manganese oxides, RMnO3 (R=La, Sc). The structures of these two crystals were described in Chap.2. LaMnO3 crystal has the orthorhombic perovskite structure, found in RMnO3 with a large ionic radius of rare-earth element R (R= La, Pr, Nd, Sm, Eu, Gd, and Tb). ScMnO3 crystal has hexagonal structure found in RMnO3 oxides containing the rare-earth elements with a small ionic radius (R= Ho, Er, Tm, Yb, Lu, and Y). We note that some of the hexagonal manganites can also form in the orthorhombic structure depending on the heat treatment. Perovskite materials display a wide variety of fundamental properties, from magnetism to ferroelectricity, from colossal magnetoresistance to half-metallicity; they

386

9 LCAO Calculations of Perfect-crystal Properties

are used in a number of important technological applications, such as transducers and memories. They also show electronic and structural peculiarities including orbital and charge ordering, formation of local moments, and Jahn–Teller distortions. Such a richness of properties, combined with their relatively simple structure, makes them ideal materials for investigating the general principles that govern these properties. Unlike the recently extensively studied perovskite manganites, the hexagonal RMnO3 compounds have a ferroelectric transition at very high temperature (e.g. 900 K for YMnO3 ), and an antiferromagnetic transition at a much lower temperature (e.g., 570 K for YMnO3.7 ). Such compounds are known as ferroelectromagnets. There exists a series of LaMnO3 bulk electronic-structure calculations, using a number of first-principles methods e.g. UHF LCAO [634, 635], LDA+U PW [636], and relativistic FPGGA LAPW [637]. LCAO studies with hybrid DFT functionals [638,639] provided a most reliable description of the electronic and magnetic structure of LaMnO3 . These studies deal with the energetics of the ferromagnetic (FM) and antiferromagnetic (AF) phases. The experiments show that below 750 K the cubic perovskite phase of LaMnO3 with a lattice constant of a0 =3.95 ˚ A is transformed into the orthorhombic phase (four formula units per unit cell). Below TN =140 K (Neel temperature) the A-type AF configuration (AAF) is the lowest in energy. This corresponds to the ferromagnetic-coupling in the basal ab (xy) plane combined with antiferromagnetic coupling in the c (z)-direction in the P bnm setting, see Fig. 9.10.

z

La Mn O y

α

β

x

FM

AAF

GAF

CAF

Fig. 9.10. Magnetic ordering in LaMnO3 crystal. FM–ferromagnetic ordering, AAF, GAF, CAF–antiferromagnetic orderings.

Also, FM, GAF and CAF magnetic states exist: FM corresponds to a fully ferromagnetic material, in GAF all the spins are antiferromagnetically coupled to their nearest neighbors, and in a CAF cell the spins are antiferromagnetically coupled in the basal plane and ferromagnetically between the planes (along the c-axis). In the DFT LCAO calculations [639] Becke three-parameter hybrid functional (B3PW) was

9.2 Electron Properties of Crystals in LCAO Methods

387

applied, [373], which uses in the exchange part the mixture of the Fock (20%) and Becke’s (80%) exchange, whereas in the correlation part the Perdew–Wang (PWGGA) nonlocal correlation functional is employed. As was demonstrated in [606], the B3PW functional gives the best description of the atomic and electronic structures, as well as elastic properties of several ABO3 perovskite materials. In some cases, for a comparison the B3LYP hybrid functional was also used (the exchange part is the same as in the B3PW functional and the correlation is the Lee–Yang–Parr nonlocal functional). For comparison, the DFT PW calculations with the PW91 GGA nonlocal functional were made in [639]. As was noted earlier DFT PW calculations with hybrid functionals are not implemented in modern computer codes. The relative smallness of the total energy differences between different magnetic phases requires a high numerical accuracy in the direct-lattice and Brillouin-zone summations. Therefore, in [639] the cutoff threshold parameters of the CRYSTAL code for Coulomb and exchange integrals evaluation have been set to 7, 7, 7, 7, and 14, respectively. The integration BZ has been carried out on the Monkhorst–Pack grid of shrinking factor 8 (its increase up to 16 gave only a small change in the total energy per unit cell). The self-consistent procedure was considered as converged when the total energy in the two successive steps differs by less than 10−6 a.u. In order to check how the results depend on the basis-set (BS) choice, B3LYP and B3PW LCAO calculations were performed for the cubic LaMnO3 with one formula unit per primitive cell with the experimental lattice constant of 3.95 ˚ A. Five different BS (BS1-BS5) were used, including the BS optimized both in all electron (AE) and pseudopotential calculations (large- and small-core Hay–Wadt pseudopotentials were taken for La and Mn atoms). The details of BS optimization and choice are given in [639]. The total energies for the cubic structure (with the five atom primitive unit cell) obtained in nonspin-polarized and spin-polarized B3PW calculations were compared with different magnetic ordering of four d electrons on the Mn3+ ion (the d-levels are split in the cubic field into t2g and eg levels, the latter are higher in energy than the former): total spin projection Sz = 2 (four electrons occupy t2g and eg levels), Sz = 1 (three α electrons and one β electron occupy the t2g level), and Sz = 0 (two α electrons and two β electrons occupy the t2g level). The calculated self-consistent Mn atom magnetic moment is close to 0, 2 and 4 for the three cases under consideration. Since the number of electrons per cell depends on the basis used (AE or without core electrons), the absolute values of these energies are quite different. The basis optimization for the same BS choice results in a lower energy for the same spin projection. It was shown that the order of relative energies for different magnetic configurations is the same for all BS chosen and even the absolute values of energy differences are close. Independently of the BS choice the lowest total energy per cell corresponds to the maximal spin projection Sz = 2, i.e. for the Mn3+ ion in a crystal the Hund rule holds and the lowest energy corresponds to the maximal spin. This result demonstrates that the magnetic behavior of insulators can usually be discussed in terms of the physics that applies to isolated atoms or ions that have a magnetic moment. The Mulliken atomic charges remain practically the same for different magnetic orderings, provided the BS is fixed. At the same time, their absolute values show the BS dependence for the same spin projection value. The relative energies of different magnetic orderings reveal the same sign in PW DFT and LCAO calculations (the lowest energy corresponds to Sz = 2). The Bader atomic

388

9 LCAO Calculations of Perfect-crystal Properties

charges, calculated in the PW DFT method, compared with the Mulliken charges, are much smaller and also show a weak dependence on the magnetic ordering. To study the magnetic ordering in LaMnO3 , the so-called broken symmetry approach was adopted [638]. It allows one to deduce the magnitude of the magnetic coupling data making spin-polarized calculations for different magnetic orderings of transition-metal atoms. LaMnO3 is stabilized at moderate temperatures in the or16 thorhombic structure comprising four formula units, space group D2h (in P bnm and P nma settings the largest orthorhombic lattice translation vector is directed along the z or y axis, respectively; in what follows, the P bnm setting is chosen). The real structure can be viewed√as a √ distorted cubic perovskite structure with a quadrupled tetragonal unit cell (ap 2, ap 2, 2ap ) where ap is the lattice parameter of the cubic perovskite structure. This tetragonal cell is slightly distorted in the real orthorhombic structure. The calculations on the tetragonal model (both in LCAO and PW basis), i.e. four formula units without the structural distortion have shown that LaMnO3 is metallic in all magnetic states and the ground state is FM. This contradicts the experimental data, for both the energy gap (LaMnO3 is believed to be a spin-controlled Mott–Hubbard insulator with the lowest-energy d–d transitions around 2 eV [640]) and magnetic AAF ordering in the ground state below 140 K. The results obtained in [639] for cubic LaMnO3 with the primitive cell of five atoms explain this fact: the tetragonal structure remains in fact cubic, with the tetragonal supercell; since in the primitive unit cell the FM configuration corresponds to the metallic ground state, the same is true for the undistorted tetragonal structure. However, when the orthorhombic atomic distortions are taken into account, the AAF structure turns out to be the ground state, in agreement with experiment. This is seen from results given in Table 9.23, [639], where the relative energies of different magnetic phases are presented (the energy for the FM phase is taken as zero energy). The calculations were made for orthorhombic structure with the structural parameters from a neutron-diffraction study [641]. Magnetic moments µ on the Mn atom and magnetic and coupling constants Jab and Jc are also presented there. The Ising model Hamiltonian   H = −Jab Szi Szj − Jc Szk Szl (9.79) ij

kl

was used, where Jab and Jc are exchange integrals (magnetic coupling constants) between nearest neighbors in the basal plane (xy) and between nearest neighbors along the c-axis, respectively, Szi stands for the z-component of the total spin on the magnetic center i, and (ij) and (kl) indicate summation over intraplane and interplane nearest magnetic centers, respectively. Due to two different possible choices of the Ising Hamiltonian presentation, we stress that in (9.79) that the form of (9.78) is used that contains double summation over each pair of centers and gives positive values for Jab and negative for Jc . The latter must be taken into account in a comparison with the experimental data obtained by fitting to the Ising Hamiltonian. In particular, experimental Jab and Jc values [641] have to be multiplied by a factor of 2 for the Hamiltonian (9.79). A set of equations relating the energy differences for the FM, AAF, GAF and CAF configurations with the magnetic coupling constants sought for was used: E(FM) − E(AAF) = E(CAF) − E(GAF) = −32Jc

(9.80)

9.2 Electron Properties of Crystals in LCAO Methods

389

Table 9.23. The energy (in meV per unit cell) of the different magnetic phases for orthorhombic LaMnO3 for the experimental structure [641]. The energy of the FM configuration is taken as zero energy. Magnetic moments µ on the Mn atom in µB , magnetic coupling constants Jab and Jc in meV. Experimental data: µ =3.87 for AAF [632], Jc =–1.2, Jab =1.6 [640] Method/basis set UHF(BS1)a B3LYP(BS1)b UHF(BS2)c B3LYP(BS2)b UHF(BS3)d Fock-50(BS3)d B3LYP(BS3)d B3LYP(BS4)b B3LYP(BS5)b B3PW(BS5)b GGAPW91(BS5)b (GGA-PW)b (LAPW)e (LMTO)f FLMTO(GGA)g (LDA+U)h a f

AAF –4.8 –33.0 –8.0 –33.0 –5.2 –12.2 –32.2 –32.0 –30.0 –19.0 –40.0 –59.0 –72.0 –62.0 –98.8 –34.0

— 3.80 — 3.78 3.96 3.89 3.80 3.81 3.82 3.86 3.71 3.55 — 3.46 — —

GAF 55.6 112.0 48.0 84.0 51.2 89.22 114.0 103.0 106.0 153.0 248.0 189.0 96.0 243.0 142.8 170.0

— 3.72 — 3.71 — — — 3.73 3.74 3.75 3.58 3.35 — 3.21 — —

Reference [635], b Reference [639], c Reference [634], Reference [643], g Reference [644], h Reference [645].

CAF — 120.0 56.0 101.0 55.9 93.64 121.5 117.0 117.0 152.0 234.0 224.0 136.0 — 167.2 — d

— 3.73 — 3.71 — — — 3.76 3.77 3.79 3.64 3.46 — — — —

Jc –0.15 –0.64 –0.25 –0.78 –0.15 –0.26 –0.62 –0.72 –0.64 –0.28 –0.83 –1.47 –1.75 –1.94 –1.92 –1.06

Jab 0.94 2.07 0.88 1.70 0.88 1.52 2.09 1.97 1.98 2.50 4.08 3.69 2.38 4.76 3.19 2.66

Reference [638],

E(FM) − E(CAF) = E(AAF) − E(GAF) = −64Jab

e

Reference [642],

(9.81)

Again, to avoid misunderstanding, (9.80) and (9.81) are written for a quadruple cell, corresponding to four formula units. For calculating the coupling constants both (9.80)and (9.81) were used and an averaging was performed. Unfortunately, E(CAF) is not always presented in the published results (see Table 9.23). The calculated magnetic coupling constants are compared with the experimental data in the last two columns of Table 9.23. This table demonstrates how the calculated magnetic coupling constants depend on the Hamiltonian choice (LDA, UHF, hybrid) and the BS choice (LCAO, PW, LAPW). These results can be briefly summarized as follows. Independently from the BS and Hamiltonian used, all calculations mentioned in Table 9.23 correctly reproduce the sign of the experimental exchange integrals and their relative values (|Jab | > |Jc |). In all UHF and hybrid (B3LYP, B3PW) calculations the exchange integrals agree better with the experimental data than in DFT calculations. We explain this by the incorporation of the Fock exchange into UHF and the hybrid methods. For example, if we fix the AO basis as BS3 and analyze a series of the UHF (pure Fock exchange), Fock-50 (50% of Fock exchange) and B3LYP (20% of Fock exchange included), the coupling constants Jab and Jc in this series are getting closer to the experimental values. The effect of the correlation part is smaller (compare B3LYP and B3PW results for BS5). The lack of Fock exchange in LCAO GGA and GGA-PW calculations leads to overestimated values of both magnetic coupling constants. This overestimate is

390

9 LCAO Calculations of Perfect-crystal Properties

well observed also in previous LAPW, FLMTO, and LDA+U calculations. Therefore, in agreement with the conclusions, made by other researchers it is demonstrated that when calculating the experimentally observable magnetic coupling constants, the nonlocal exchange plays an important role. Such hybrid DFT or UHF calculations are practically possible only for the LCAO BS. These results confirm again the conclusion [632] that the CRYSTAL code is a valuable tool for the study of magnetic properties for open-shell transition-metal compounds. The optical gap for the AAF orthorhombic phase was also calculated in [639]. The B3PW LCAO gives 2.9 eV and 4 eV for the Mn d-d and O2p-Mnd transitions, in good agreement with the experiment [640], whereas the DFT PW gap of 0.6 eV is an underestimate typical for the DFT. These results, in line with those in [638], demonstrate that it is a combination of the nonlocal exchange with correlation effects realized in the hybrid functionals that considerably narrows the gap between calculated and experimental magnetic coupling constants. This questions the generally accepted idea that DFT is better suited than UHF and related methods for the study of transition-metal oxides, in particular, LaMnO3 . The surface calculations of this crystal made in [639] we discuss in Chap. 11. We noted that the hexagonal manganites RMnO3 (R = Sc, Y, Ho–Lu) are an interesting group of compounds because of their unusual combination of electric and magnetic properties. At low temperatures, they show coexistence of ferroelectric and magnetic orderings. ScMnO3 plays a prominent role in the series of hexagonal manganites. It has the smallest distance between magnetic Mn3+ centers along the c-direction and has the highest Neel temperature. Below the temperature 1220 K its structure belongs to space group P 63 cm [646]. The Mn3+ ions are surrounded by five oxygen ions that form a distorted trigonal bipyramid, see Fig. 2.18. In this environment the 5 D state of Mn3+ with 3d4 occupancy splits into three states. The magnetic moment of the Mn3+ ions in ScMnO3 has been measured as 4.11 µB . Its Neel temperature is 130 K [647], much higher than that of YMnO3 (71 K), [648]. The assignment of the strong optical absorption band at about 1.6 eV for hexagonal manganites is a matter of debate [649]. From local spin-density approximation (LSDA) and LSDA+U calculations of YMnO3 [650] this band was interpreted as an interatomic charge-transfer transition from O 2p to Mn 3d orbitals. In another theoretical study of YMnO3 based on LSDA and LSDA+U [651], it was found that the states near the top of the valence band have predominantly Mn 3dx2 −y2 character, while the lowest-unoccupied subband has Mn 3dz2 character. The d-band centers of the occupied and empty bands are separated by 2.0 eV. The latter theoretical result is in agreement with a careful analysis of experimental spectra [649] that revealed that the band at 1.6 eV is due to an intra-atomic 3d − 3d transition in the Mn3+ ions. The O(2p)→ Mn(3d) charge-transfer transition in LaMnO3 and related compounds occurs at 3.1 eV or higher. Later experiments on ScMnO3 [652] were interpreted differently, partly based on previous LSDA calculations. In particular, the strong band in ScMnO3 (at 1.57 eV), ErMnO3 (1.59 eV), and YMnO3 (1.61 eV) was considered now as a charge-transfer band. In this context we have to point out that LSDA values for bandgaps are usually much too small. In [638] a charge-transfer transition in LaMnO3 was found at 2.3 eV with B3LYP and at 4.0 eV with Fock35 (35 per cents of the HF exchange in the hybrid functional) functionals. Considering that one-particle energies obtained by band-structure calculations do not describe local d–d transitions, the agreement between LSDA charge-transfer and the experimentally determined band may be fortuitous.

9.2 Electron Properties of Crystals in LCAO Methods

391

The LCAO calculations [653] with the computer code CRYSTAL03, [23] is the first attempt to establish the electronic and magnetic structure of the low-temperature phase of ScMnO3 from first principles. The solid phase was modeled with threedimensional periodic supercells of stoichiometry Sc6 Mn6 O18 . Three different Hamiltonians were used: UHF, hybrid HF-DFT (B3LYP) and DFT (BLYP). In a previous study of magnetic coupling in CuGeO3 [632] the same Hamiltonians had been compared and it was found that the hybrid HF-DFT B3LYP Hamiltonian gives the most accurate values for the magnetic coupling constant J. Optimized basis functions were used for Mn and O as obtained in [639]. The valence basis of Sc was optimized for Sc2 O3 bulk crystal, Sc atom inner (1s 2sp) electrons were described with the Hay– Wadt small-core effective core potential. The Sc6 Mn6 O18 cell contains two hexagonal atomic planes. Three magnetic phases were considered: ferromagnetic (FM) when the four unpaired electrons of each of six Mn ions have parallel spins; two antiferromagnetic (AFc and AFa). In the AFc phase the spins of the Mn ions in different atomic planes along the c-direction are antiparallel, while all spins are parallel in the same plane (between two planes, the Mn–Mn distance is about 5.8 ˚ A, while it is only 3.4 ˚ A in the plane). In the AFa state each plane contains two types of Mn with antiparallel spin in a ratio of 1:2. The local spin arrangements are shown in Fig. 9.11.

D

E

Fig. 9.11. Two local spin configurations in the AFa state in a hexagonal plane; in case (a) the central spin-down Mn ion is surrounded by 4 spin-down and 2 spin-up Mn ions, in (b) the central spin-up Mn ion is surrounded by 6 spin-down Mn ions.

This is a simplification of the real situation in ScMnO3 where the Mn spins are not collinear [647]: the projections of neighboring Mn spins in the same plane are in fact rotated by 120◦ . If the FM state and the AFc state are compared, the two neighbors along the c-direction in the planes above and below each magnetic center have different spin. It was found that the corresponding interplane coupling constant Jc ≤ 0.2 meV for all three Hamiltonians under consideration, i.e.the magnetic coupling between Mn ions of different planes is negligible. The results of the calculation of intraplane coupling constant are given in Table 9.24. The magnetic coupling constants of ScMnO3 have

392

9 LCAO Calculations of Perfect-crystal Properties

Table 9.24. Energy difference (eV) between the AF and the FM states of ScMnO3 , estimated magnetic coupling constant (meV), Mulliken charges q (a.u.), magnetic moment of Mn ions (µB ) obtained with three different Hamiltonians [653] Hamiltonian UHFa B3LYPa B3LYPb BLYPa Exper.

–0.163 –0.555 –0.449 –0.925

Ja 4.1 13.9 11.2 23.1 5.5–7.0c

Qsc +2.3 +1.9 +1.9 +1.87

QMn +2.4 +2.0 +2.0 +1.9

QO –1.5 –1.37 –1.3 –1.2

eff 4.0 3.7 3.8 3.5 4.11d

a

with fixed structural parameters from experiment [654] with fully optimized in [653] structures c estimated from a comparison with YMnO3 (the Neel temperature 70 K and Ja =3.8 meV) d Reference [648] b

not yet been measured at the time of calculations [653]. The simplest assumption is a linear relation between J and the Neel temperature TN [655]. It is then possible to estimate Ja of ScMnO3 from the coupling constant of the isostructural compound YMnO3 (3.0–3.8 meV, [655]). With TN = 130 K for ScMnO3 and TN =71 K for YMnO3 [648] one obtains Ja =5.5–7.0 meV. In Table 9.24 the calculated coupling constants are compared to this crude estimate. The UHF method gives Ja =4.1 meV, which is slightly smaller than the estimated value. When electron correlation is taken into account with B3LYP, a much larger value (Ja =13.9 meV) is obtained. But also the description of electron exchange has a substantial effect on the magnetic structure. The BLYP method, which has no contributions from exact HF exchange, gives the largest coupling constant, Ja =23.1 meV. The same ordering of magnetic coupling constants obtained with these methods has been obtained in studies of CuGeO3 [632], where the B3LYP result favorably agreed with the measured value. Since for ScMnO3 the deviation from the estimated crude value is substantial with B3LYP, it is likely that the linear extrapolation scheme is inadequate. But before any conclusion was drawn the effect of changes in the local structure on the calculated coupling constant was investigated. A full optimization of hexagonal lattice parameters and fractional coordinates of ScMnO3 was performed with B3LYP for both the FM and the AFa states, [653]. The energy difference between these two states is reduced by 20% (compared with that obtained for the experimental structure) and Ja accordingly decreases to 11.2 meV. Since this value is still considerably larger than the estimated one the above statement about the inaccuracy of the linear interpolation scheme holds. In Table 9.24 there are also compared the calculated self-consistent magnetic moments µef f with the experimental value 4.11 µB [648]. The obtained values range from 3.5 µB (BLYP) to 4.0 µB (UHF) and are thus in agreement with experiment. The small change from 3.7 µB to 3.8 µB due to optimization at the B3LYP level indicates that the local atomic structure has a small effect on this property. Atomic charges were calculated based on the Mulliken population analysis. Table 9.24 shows that the ionicity is reduced in the series from UHF to BLYP. The oxygen and manganese charges range from –1.2 to –1.5 and +1.9 to +2.4, respectively, indicating substantial covalent contributions to the bonding. These values do not essentially differ from those (–1.6 to –1.8 and +1.5 to +1.8), obtained in the LaMnO3 calculations [639]. The

9.3 Total Energy and Related Observables in LCAO Methods for Solids

393

PDOS calculated for ScMnO3 with B3LYP for the fully optimized structure of the AFa state shows the following. The highest-occupied states between –0.5 eV and 0 eV (the Fermi level is taken as the zero energy), and the lowest-unoccupied bands between 3.3 eV and 4.5 eV consist of a mixture of O(2p) and Mn(3d) orbitals. Sc orbitals only contribute to higher unoccupied states above 5 eV. In agreement with experimental estimates [649], the interband transition at 3.3 eV with B3LYP was found. On the basis of the calculated PDOS the excitation is neither a pure d–d nor a charge-transfer transition, rather it represents an intermediate situation. As is seen from Table 9.24 the structure-parameter optimization influences the results of the electronic-structure calculations. Such an optimization also allows the calculation of the such important properties of solids as the cohesive energy, relative stability of phases with different structure, bulk moduli, elastic constants. LCAO calculations of these total energy related properties are considered in the next section.

9.3 Total Energy and Related Observables in LCAO Methods for Solids 9.3.1 Equilibrium Structure and Cohesive Energy The theoretical determination of the equilibrium structure of molecules and periodic systems and their cohesive energy is of primary importance in quantum chemistry of molecules and solids. In the molecular systems, the parameters that must be optimized are the nuclear coordinates. Such an optimization requires the numerical or analytic calculation of forces – the total energy derivatives with respect to nuclear coordinates. The methodology for calculating analytic first derivatives at the HF (SCF) LCAO level of theory was suggested by Pulay [656]. Extensions of the HF derivatives to density-functional theory methods were straightforward. Derivatives of correlated (post-HF) energies followed a number of years after the SCF derivatives [657]. Analytical gradients have become a standard tool for the optimization of molecular structures and are implemented in modern molecular electronic-structure codes. Calculations with the structure optimization are now possible on molecules with hundreds of atoms, and energy derivatives provide an enormous amount of information about the potential-energy surface at very little additional cost. Analytic derivatives with respect to geometrical parameters are used not only for the structure optimization but also for exploring potential-energy surfaces and the study of transition states and following reaction paths. Such molecular properties as vibrational frequencies, IR and Raman intensities, NMR shielding constants, etc., can be formulated in terms of second and higher derivatives with respect to geometry and applied fields. Such calculations are now practical and routine using analytic derivatives at the SCF level and a few correlated methods, [657]. In periodic systems, the cell dimensions are a set of optimized structure parameters additional to nuclear coordinates in the primitive unit cell. Nowadays, the majority of solid-state codes compute the total energy with KS PW methods. In KS PW calculations the analytical gradients of total energy for nuclear coordinates and cellparameter optimization are implemented in computer codes and widely used in the

394

9 LCAO Calculations of Perfect-crystal Properties

electronic-structure calculations of crystals [377]. The more complicated task is the analytical gradients theory in LCAO methods for periodic systems. The total energy E of the crystal (per primitive cell) is the sum of electron energy Ee and nuclear repulsion energy EN : E = Ee + EN . The electron energy Ee as calculated within the HF LCAO approximation can be expressed in terms of the one-electron density matrix and includes the direct lattice sums, see (7.46). In the KS LCAO method only the electron-density is involved in the Hamiltonian, see (7.47). The analytical gradients in HF and MP2 LCAO calculations were applied for a long time only for one-periodic (1D) systems [658, 659]. The efficient method of analytic energy-gradient calculation in the KS LCAO method for periodic systems with one-, two- and three-dimensional periodicity was presented only recently in [82] and implemented in the code GAUSSIAN03 [107]. A real space approach is used, where all the summations are performed in direct space. Energy derivatives with respect to geometrical parameters (atomic forces and stress tensor) are computed analytically to high accuracy using techniques based on the fast multipole method (see Chap. 7). This allows for the accurate lattice parameters and nuclear-coordinate optimization and evaluation of vibrational frequencies using finite differences of analytic forces. The extension of this technique to the hybrid HF-DFT LCAO Hamiltonians allowed optimization of the structure of different solids in good agreement with experiment (as was demonstrated in Chap. 7). Simultaneously, progress has been achieved to implement analytical HF gradients in the LCAO code CRYSTAL [23, 660]. The formulas for analytic total-energy gradients with respect to nuclear coordinates in periodic systems were presented in [661, 662] and illustrated in test calculations. It was demonstrated that an efficient nuclear-coordinates optimization of large systems with any periodicity can be performed. Later, the theory of analytical HF gradients with respect to the cell parameter for three-periodic systems was presented [663], so that full structure optimization with the help of analytical gradients is now possible. It is important to note that the CRYSTAL code is based on the Ewald method in three dimensions, so that computing analytical gradients with respect to the cell parameter requires various additional derivatives that were not yet available with the implementation of nuclear gradients, and this has been documented in great detail in [663]. The one- and two-dimensional cases are again different because different potentials are used in a real-space approach. The article [664] complements [663] by analytical HF gradients with respect to cell parameters for systems periodic in one and two dimensions. The implementations mentioned include the cases of spin-restricted and unrestricted polarization. We intentionally do not give here the mathematical details of the approaches allowing implementation of analytical gradients in the calculations of periodic systems (for these details readers are referred to the cited publications and references therein). We note that such an implementation is essentially more complicated than in the case of molecular systems and requires high accuracy in the total-energy calculation. One can find the detailed analysis of the accuracy in gradients calculations on numerical examples in [660,661,663]. The comparison of the numerical and analytical derivatives values can also be found. In what follows we turn to the results obtained for the equilibrium structure and cohesion energy in the crystalline metal oxides. The LCAO calculations discussed were made with the CRYSTAL code and use of HF, KS and hybrid Hamiltonians.

9.3 Total Energy and Related Observables in LCAO Methods for Solids

395

The cohesive (binding) energy Ecoh is defined as the energy required to dissociate a solid into noninteracting atomic species A with energies EA  EA − Esolid (9.82) Ecoh = A

In this definition, Ecoh is positive for any thermodynamically stable crystal. The summation is made over the atoms included in the primitive unit cell, Esolid is the total energy per primitive cell. Calculated values of the cohesive energy are compared with experimental results that can be obtained by measuring the latent heat of sublimation at various low temperatures, and extrapolating to zero Kelvin. The binding-energy definition depends on what the constituent parts are considered to be: reference can be made to the ions in ionic crystals or to the molecules for molecular crystals. The expression “lattice energy” is also in use either as a synonym of cohesive energy or to denote the energy difference relative to the free ions or molecules [568]. In the calculations of Ecoh we are interested not in the total energy of a system as such, but rather in energy differences that might be as small as a few kcal/mol. It is with respect to this scale of energy that the overall accuracy of a calculation must be verified. The molecular codes now allow an accuracy of 1 kcal/mol for thermochemical data, which is still far from being attained in solid-state chemistry, although attention to the quantitative aspects of the calculation is increasing rapidly, [568]. The different computational aspects of the ground-state total-energy evaluation for crystals are considered in [665]. In particular, some sources of errors in the total-energy calculations are analyzed: 1) the choice of Hamiltonian (HF, DFT, HF+ a-posteriori correlation correction, description of the core electrons by one or other pseudopotential); 2) the use of a finite variational basis; 3)the numerical approximations, introduced in the solution of LCAO equations (truncations of infinite lattice sums, reciprocal-space integration). In the evaluation of the cohesive energy, partially different basis sets for the valence or semicore states need to be used for the atoms or ions and the bulk crystal. The bulk basis set can be improved by the addition of polarization functions, which do not contribute to the energy of atoms and ions in the gas phase because of AO orthogonality, but they can be important in the expansion of the bulk wavefunction. The atomic function tails become unnecessary in the description of the crystalline orbitals. Moreover, the use of diffuse AOs is normally to be avoided (see Chap. 8). Thus, separate optimizations of basis set for the bulk and the isolated atoms are necessary, i.e. not equal, but variationally-equivalent basis sets are to be used. The handling of these problems in the cohesive-energy calculation is illustrated in [568] and the general influence of the Hamiltonian choice on the calculated cohesive energy is discussed. An important aspect of the comparison between the calculated and experimental cohesive energy is related to the difference between the definition of cohesive energy and the crystal-formation energy that is reported in thermodynamic tables, the main point probably being that quantum-mechanical calculations refer to the static limit (T = 0 K and frozen nuclei), whereas experiments refer to some finite temperature. In fact, the comparison is never straightforward, and the original experimental datum is linked to the calculated cohesive-energy values through a chain of thermodynamic transformations. As an example, the Born–Haber cycle for the formation of a crystal has to be considered (see below).

396

9 LCAO Calculations of Perfect-crystal Properties

A general feature of the HF LCAO method is the underestimation of the cohesive energy (the error varies between –20% and –45% for the series of compounds considered in [568]). DFT calculations of Ecoh allow one to recover part of the contributions that are disregarded with HF, at about the same computational cost. LDA even tends to overestimate the cohesive energy, whereas GGA and B3LYP results are closer to the experimental measurements. At any rate, the performance of none of the Hamiltonians used is fully satisfactory, and the correct answer is always somewhere in between the two extremes represented by HF and LDA, but LDA results are generally improved when gradient corrections are included. Properly correlated wavefunctions perform better than HF and DFT methods: the binding energies for the incremental scheme and local MP2 methods (see Chap. 5) agree better with the experimental data. Table 9.25. The equilibrium structure and cohesive energy for rutile TiO2 ( [666]). Lattice parameters are given in ˚ A, cohesive energy in eV Observable HF (AE)* HF(PP)* HF+correlation Experiment a c u Ecoh

4.559 3.027 0.3048 13.95

4.555 3.024 0.3061 15.99

4.548 2.993 0.3046 19.35

4.592 2.958 0.3048 20.00

*Reference [596]

As an example, we give in Table 9.25 the results obtained for equilibrium structure and cohesive energy in rutile TiO2 by different LCAO methods [666]. For the correlation calculations in [666] an incremental scheme was used, one-, two- and threeatom clusters in a large slab of Madelung point charges were included in the CCSD calculations. For the Ti ions nearest to the cluster atoms Ti4+ pseudopotentials were used instead of the bare point charges, in order to simulate the Pauli repulsion on the O2− electrons of the inner cluster. The cohesive energy was calculated including zeropoint vibrations (see Sect. 9.3.3). As is seen from Table 9.25 the electron correlation for TiO2 crystal does not influence the equilibrium structure parameters in a major way but is important for the cohesive energy. In Table 9.26, a summary of the results from a selection of experimental and recent ab-initio studies of the structural parameters of rutile is presented, see [597]. Early LCAO-HF and PW-LDA studies of rutile yielded lattice parameters to within 2% of experiment. More recent studies that have taken advantage of improvements in the theoretical techniques and available computing power to perform calculations with improved treatments of exchange and correlation (DFT calculations based on the GGA) and higher numerical accuracy improved basis sets have yielded results consistent with those from the earlier work. Generally speaking, all the ab-initio studies of rutile have yielded structural parameters to within a few per cent of experiment. In particular, LCAO methods give results with the same accuracy as PW methods.

9.3 Total Energy and Related Observables in LCAO Methods for Solids

397

˚), numTable 9.26. The theoretical and experimental structural parameters for rutile (in A bers in parentheses indicate the percent deviation from low-temperature neutron-diffraction experiments. The references to the theoretical and experimental data, given in this table, can be found in [597]. SC,LC mean small-core and large-core pseudopotentials, AE –all electron calculations Method

a

PW-LDA SC PW-LDA SC PW-LDA SC PW-LDA LC PW-LDA LC PW-LDA LC PW-LDA LC PW-GGA LC PW-GGA LC OLCAO-LD AE LCAO-HF LC LCAO-HF AE LCAO-HF AE LCAO-HF AE LCAO-LDA AE X ray 298 K Neutron 295 K Neutron 15 K

4.555 4.528 4.567 4.536 4.653 4.603 4.638 4.624 4.690 4.622 4.555 4.560 4.529 4.548 4.529 4.594 4.593 4.587

c

(–0.70) (–1.29) (–0.44) (–1.11) (1.44) (0.35) (1.11) (0.81) (2.25) (0.77) (–0.70) (–0.59) (–1.26) (–0.85) (–1.26) (0.15) (0.13)

2.922 2.918 2.932 2.915 2.966 2.976 2.923 2.992 2.990 2.983 2.998 3.022 3.088 2.993 2.942 2.958 2.959 2.954

u

(–1.08) (–1.21) (–0.74) (–1.32) (0.41) (0.74) (–1.05) (1.29 ) (1.22) (0.99) (1.49) (2.30) (4.54) (1.32) (–0.41) (0.14) (0.17)

0.304 0.303 0.305 0.304 0.305 0.304 0.305 0.305 0.306 0.304 0.306 0.305 0.305 0.305 0.304 0.305 0.305 0.305

(–0.33) (–0.66) (0.00) (–0.33) (0.00) (–0.33) (0.00) (0.00) (0.33) (–0.33) (0.33) (0.00) (0.00) (0.00) (–0.33) (0.00) (0.00)

Table 9.27 shows the results of binding-energy HF LCAO calculations [598] in corundum-like Me2 O3 oxides (M=Ti,V,Cr,Fe,Co,Ni). The a-posteriori DFT correlation correction of total energy was added in the UHF LCAO AE calculations with numerical optimization of corundum structure parameters. Table 9.27. Calculated and experimental binding energies (eV) of corundum-like oxides [598] Oxides UHF UHF+corr Experiment Al2 O3 Ti2 O3 V2 O3 Cr2 O3 Fe2 O3 Co2 O3 Ni2 O3

–23.64 –21.41 –19.28 –18.10 –17.46 –19.80 –17.41

–30.08 –28.05 –26.23 –25.08 –22.00 –24.90 –22.74

–32.14 –33.45 –31.21 –28.05 –25.17 — —

The atomic energies of Al, Ti, V, Cr, Co, Ni and oxygen were derived by using the basis sets adopted for solid oxides, but supplemented by two more diffuse

398

9 LCAO Calculations of Perfect-crystal Properties

shells, the exponents of which were optimized. The binding energy is computed as the difference between the total crystal energy per formula unit (for the most stable antiferromagnetic configuration) and the energies of the constituent isolated atoms. For comparison, experimental binding energies are also given. These were obtained by applying a suitable Born–Haber thermochemical cycle of type 



0 0 Ecoh (expt) = Ha,i + Hi298 − Hi0 + ∆f H 298 − H 298 − H 0 − Evib (9.83) i

Here, the sum is extended to all chemical elements in the formula unit. The formation enthalpy ∆f H 298 of Me2 O3 compounds, sublimation (Me) and dissociation (O2 ) en0 thalpies Ha,i and heating enthalpies Hi298 − Hi0 for all chemical species involved were 0 taken from [667]. The zero-point vibrational energies Evib of all oxides were estimated by the Debye model, using an isotropic approximation for the mean acoustic-wave velocity derived from the bulk modulus in order to obtain the Debye temperature. Table 9.27 shows that the general trend of experimental data (from Al2 O3 to Fe2 O3 ) is simulated correctly by theoretical binding energies, with deviations of the order of –30% for UHF energies, which are reduced to –12% by including the DFTbased correction for electron correlation. A secondary feature of the experimental data is not reproduced by the calculated results: the peculiar stabilization energy of Ti2 O3 with respect to other oxides. Also, V2 O3 seems to be affected by a larger error than the average. This is consistent with the difficulties found in achieving SCF convergence to stable insulating states for these two oxides: oxides of early-row transition metals, with their very diffuse d orbitals and tendency to metal states, are harder to simulate by HF methods than those of end-row metals. As we have seen in Sect. 9.1 the UHF calculations of Ti2 O3 reproduce the electron-correlation effects on the local properties of chemical bonding. It appears that a-posteriori correction of UHF total energy is not enough to reproduce the correlation effects on the binding energy, i.e. self-consistent hybrid HF-DFT calculations are required. In the next section we consider the LCAO calculations of other total-energy-related observables. 9.3.2 Bulk Modulus, Elastic Constants and Phase Stability of Solids: LCAO ab-initio Calculations We considered above the calculation of observables requiring the first-order derivatives of the total energy. For the equilibrium structure of crystal (equilibrium nuclear coordinates and unit-cell parameters) the total-energy derivatives with respect to nuclear r and lattice parameters ai equal zero at constant temperature T :    coordinates ∂E ∂E = 0, = 0. ∂r i ∂ai T T An important variable is pressure as under pressure interatomic distances in crystals show larger variations than those induced by temperature. At constant temperature T pressure P is related to the rate of energy change with the unit-cell volume

∂E V by relation P = − ∂V , including the first-order derivative of total energy with T respect to the cell volume. Such observables as the bulk modulus, the elastic and force constants depend on the second-order derivatives of the total energy. The bulk modulus B measures the response of a crystal to isotropic lattice expansion or compression and can be related to the second-order derivative of the total

9.3 Total Energy and Related Observables in LCAO Methods for Solids

399

energy with respect to the volume, V , evaluated at the equilibrium volume V0 :    2  ∂P ∂ E B = −V = −V (9.84) ∂V T ∂V 2 V0 The anisotropic response of a crystal to a mechanical force can be described by the elastic constants, Cij , which are defined as the second derivatives of the total energy with respect to the components εi and εj of the strain tensor, ε:  2  ∂ E (9.85) Cij = ∂εi ∂εj eq   ∂u ∂ui The strain-tensor components εij = 21 ∂x + ( ∂xji are first-order derivatives of the j displacements u. The elastic constants provide a full description of the mechanical properties of crystalline materials. The bulk modulus is related to the elastic tensor. In the case of a cubic system, where only three independent components of the elastic tensor differ from zero, B can be obtained from C11 and C12 as 31 (C11 + 2C12 ). Table 9.28 shows the results of the HF LCAO optimization of the Cu2 O crystal structure with the all-electron basis set [622]. These results show the feature noted above of the HF method – an overestimation of the lattice size, mainly due to the neglect of electronic correlation. The a-posteriori inclusion of the electronic correlation considerably improves the results of the structure optimization. Table 9.28. Calculated lattice constant a (˚ A), interatomic distances (˚ A), bulk modulus (GPa) and elastic constants (GPa) for Cu2 O [622] HF HF+LYP a Cu–O Cu–Cu B C11 C12 C44

4.435 1.920 3.136 100 118 90 59

4.277 1.852 3.025 93 103 88 65

Expt. 4.2696 1.849 3.012 112 116 – 126 105 – 108 11 – 13

The isotropic variation of the volume of the cubic unit cell was used also to evaluate the bulk modulus. The calculated bulk modulus is in good agreement with the available experimental data. The three independent components of the elastic tensor were derived numerically from the changes in energy obtained by applying adequate deformations to the unit cell. Good agreement has been obtained for the C11 and C12 elastic constants, while there is definite disagreement for C44 . This disagreement is certainly to be attributed to the lack of precision of these methods to estimate small values of the elastic constants. Good-quality calculations of the elastic constants would require a larger accuracy, in contrast to those properties like the cell parameters. Various possible structures of a crystal and the associated relative energies can be determined experimentally as a function of pressure. This structure evolution as

400

9 LCAO Calculations of Perfect-crystal Properties

a function of pressure can involve one (polymorphism) or several (solid-state reaction driven by pressure) types of systems. For example, CaO crystal phase transition CaO(B1 ) ⇄ CaO(B2 ) includes two polymorphic phases B1 (fcc lattice, Ca atom is sixfold coordinated) and B2 (sc lattice, Ca atom is eightfold coordinated). The decomposition reaction of MgAl2 O4 spinel into its oxide components MgAl2 O4 ⇄ MgO+Al2 O3 includes three types of system. The knowledge of pressure enables investigation of phase stability and transitions, [568]. In fact, enthalpy is immediately obtained from the total energy by H = E + P V at T =0 K, where any transformation of a pure substance tends to be isotropic, phase stability can be related to the enthalpy and a phase transition occurs at those points in the phase diagram where two phases have equal enthalpy. From the computational point of view, it is possible to explore a range of crystalline volumes by isometric lattice deformations and obtain the corresponding values of pressure and, consequently, of enthalpy. It is intended that nuclei are allowed to relax to their equilibrium geometry after every lattice deformation. The theoretical study of phase transitions is made as follows. For each crystal phase, the total energy E is computed at a number of unit-cell volumes V ; at each volume, the structure parameters (nuclear coordinates and lattice parameters) that minimize E are determined. An analytical representation of E vs. V is obtained by using a polynomial expression or the Murnaghan equation of state (or any other fitting function). The Murnaghan function, by far the most universally adopted, is as follows: " #  B ′ −1 1 V V0 1 E(V ) = E0 + B0 V0 + ′ − ′ (9.86) B ′ (B ′ − 1) V B V0 B −1 The four fitting parameters are V0 (equilibrium volume), B0 (zero-pressure bulk modulus) and B ′ (pressure derivative of the bulk modulus B at P = 0), and E0 (equilibrium ∂E relationship, we get energy). From the P (V ) = − ∂V V (P ) = V0



− 1′ B B′ P +1 B0

(9.87)

Inserting (9.87) in (9.86), one obtains the analytic E vs. P dependence; by adding the P V term, the enthalpy as a function of pressure is obtained: " # 1− 1′ B B0 V0 B′ H(P ) = E + P V = E0 + ′ P +1 −1 (9.88) B −1 B0 At T =0 K, the transition pressure, Pt , corresponds to the point where all the systems have the same enthalpy: ∆H(Pt ) = 0 (9.89) This equation is solved numerically yielding the transition or the decomposition pressure. Knowing this pressure, the equation of state followed by the system during the process can be deduced. A rough estimate of the transition pressure, Pt′ , can be obtained just from the knowledge of the equilibrium values (E0 and V0 ) for each phase. At T =0 K, the enthalpy as a function of pressure can be evaluated as follows:

9.3 Total Energy and Related Observables in LCAO Methods for Solids

H(P ) = H0 +

P

dH = E0 +

P

V dP

401

(9.90)

0

0

Using this relation, (9.89) becomes ∆H(Pt ) = ∆E0 +

Pt

∆V dP = 0

(9.91)

0

If the pressure dependence of ∆V is negligible, one obtains Pt ≅ Pt′ = −∆E0 /∆V0

(9.92)

For fitting of one or multiphase transitions MULFAS (multiphase transition analysis program) by Llunell can be used. The information about this program can be found at the site www.crystal.unito.it in tutorials (phase transitions) directory. An input file for this program contains the volume and total energy data of one phase obtained by using an external quantum-mechanical or shell-model program. The first-principles all-electron LCAO calculations of the crystal structures, bulk moduli, and relative stabilities of seven TiO2 polymorphs (anatase, rutile, columbite, baddeleyite, cotunnite, pyrite, and fluorite structures) have been carried out in [597]. From the optimal crystal structures obtained with the Hartree–Fock theory at various pressures, the bulk modulus and phase-transition pressures of various high-pressure polymorphs have been derived at the athermal limit. In most cases, the calculated unit-cell data agree to within 2% of the corresponding experimental determination. In Table 9.29 the calculated bulk moduli of the various phases of TiO2 are given and compared with the existing experimental data. The calculated bulk moduli are within 10% of the most reliable experimental results. It was shown in [597] that the comTable 9.29. The bulk moduli (GPa) of various phases of TiO2 compound [597] Method LCAO-HF LCAO-LDA PW-LDA experiment

Rutile Anatase Columbite Baddeleyite Pyrite Fluorite Cotunnite P 42 /mnm I4/amd P bcn P 21 /c P a3 F m3m P nma Z=2 Z=4 Z=4 Z=1 Z=2 Z=4 Z=4 239±10 241±10 243 211±7

202±10 195±10 194 178±1

264±10 — 247 253±4

300±10 — 249 304±6

318±10 331±10 273±10 308±10 — 282 — —

380±10 – — 431±10

puted anatase–columbite, rutile–columbite, columbite–baddeleyite, and baddeleyite– cotunnite phase transitions appear in the same order as observed in experiments, and the transition pressures agree semiquantitatively with those measured. The pyrite and fluorite structures are predicted to be less stable than other polymorphs at pressures below 70 GPa, in agreement with experiments. The detailed LCAO calculations for bulk properties and the electronic structure of the cubic phase of SrTiO3 (STO), BaTiO3 (BTO), and PbTiO3 (PTO) perovskite

402

9 LCAO Calculations of Perfect-crystal Properties

crystals with optimization of basis set (BS) are presented in [606]. The results given in Table 9.30 are obtained using it ab-initio Hartree–Fock (HF) and density-functional theory (DFT) with Hay–Wadt pseudopotentials. A number of different exchangecorrelation functionals including hybrid (B3PW and B3LYP) exchange techniques are used. Results, obtained for seven types of Hamiltonians, are compared in Table 9.30 with available experimental data. On average, the disagreement between the lattice constants computed using hybrid HF-DFT functionals and experimental values for all three perovskites is less than 0.5%. The bulk moduli were calculated in two ways – as the total energy second derivatives (9.84), B1 and using the elastic constants, B2 . The results for both ways of bulk-moduli evaluation differ by no more than 10–15%. Especially good agreement with the experimental data has been achieved for hybrid functionals. With the polarization orbitals added to the BS of oxygen atom, the calculated optical bandgaps are 3.57, 3.42 and 2.87 eV for STO, BTO and PTO respectively, in very good agreement with experimental data. ˚), bulk moduli B (GPa) and elastic conTable 9.30. The optimized lattice constants a (A stants Cij (in 1011 dyn/cm2 ) for perovskites SrTiO3 (STO), BaTiO3 (BTO), PbTiO3 (TO), [606] Method LDA PWGGA PBE BLYP STO a 3.86 3.95 3.94 3.98 C11 42.10 31.29 31.93 29.07 12.21 9.80 9.75 9.39 C12 13.32 11.34 11.30 11.09 C44 B1 222 170 171 159 214 167 169 164 B2 BTO a 3.96 4.03 4.03 4.08 35.81 30.11 31.04 28.22 C11 C12 11.52 10.35 10.72 10.78 14.98 13.22 13.98 12.24 C44 196 169 175 166 B1 204 175 180 154 B2 PTO a 3.93 3.96 3.96 4.02 45.03 32.47 34.25 23.03 C11 26.14 15.81 15.52 9.93 C12 11.28 10.69 10.96 8.25 C44 B1 324 213 217 143 321 246 252 140 B2

P3PW B3LYP HF Exper. 3.90 31.60 9.27 12.01 167 177

3.94 32.83 10.57 12.46 180 177

3.92 3.89 41.7 31.72 7.11 10.25 10.5 12.35 186 174 219 179

4.01 31.12 11.87 14.85 183 188

4.04 4.01 4.00 29.75 30.1 20.60 11.57 13.46 14.00 14.54 17.34 12.60 176 190 162 172 194 195

3.93 43.04 24.95 10.93 310 279

3.96 3.94 3.97 34.42 39.83 22.9 18.08 16.90 10.1 10.35 17.20 10.0 235 245 144 242 299

We note that the results given in Table 9.30, were obtained with the BS optimization (the details of this optimization can be found in [606]). In our opinion, it is this optimization that allowed good agreement of calculated and experimental data to be obtained.

9.3 Total Energy and Related Observables in LCAO Methods for Solids

403

Strontium zirconate SrZrO3 is of interest because of possible applications in fuel cells, hydrogen gas sensors and steam electrolysis. The powder neutron-diffraction data suggest the following sequence of phase transitions in SrZrO3 : from the orthorhombic P bnm to the orthorhombic Cmcm at 970 K, to the tetragonal I4/mcm at 1100 K and lastly, to the cubic P m3m at 1400 K [668]. The first ab-initio DFT PBE calculations for all four phases of SrZrO3 using both PW and LCAO basis sets are presented in [614]. The structural parameter optimization was performed using DFT PBE-PW calculations and good agreement with experimental data was obtained. LCAO PBE calculations were made both for the experimental and optimized structures. Table 9.31 shows the calculated relative energies (per formula unit) of four SrZrO3 polymorphs. Table 9.31. Calculated relative energies (eV per formula unit) of SrZrO3 polymorphs [614]

phase

Structure parameters Exper. Optimized LCAO LCAO PW

P m3m I4/mcm Cmcm P bnm

0.000 –0.040 –0.177 –0.241

0.000 0.002 –0.252 –0.303

0.000 0.004 –0.235 –0.274

It is seen from Table 9.31 that both LCAO and PW results agree with the experimental sequence of the SrZrO3 phases: the most stable turn out to be two orthorhombic phases, whereas the tetragonal and cubic high temperature phases are close in energy. The sequence of phase transitions in ABO3 -type oxides with the temperature increase could be described in terms of the nearest BO6 octahedral tilts/rotations [668]. In the SrZrO3 case, the orthorhombic structure with three rotations is changed by two rotations for Cmcm and finally by one rotaton for the tetragonal structure. The combination of three rotations produces the lowest-energy structure. The electrostatic energy is lowest for the lowest symmetry because of the inherent instability of the ideal corner-shared octahedral network. To compensate the loss in Madelung energy, the repulsive energy should also be lowered, in order to achieve the equilibrium. Thermal expansion or entropy is the driving force for the octahedral tilts. 9.3.3 Lattice Dynamics and LCAO Calculations of Vibrational Frequencies The second-order derivatives of the energy with respect to the nuclear coordinates are involved in lattice dynamics, in particular, in the calculation of vibrational (phonon) spectra. We shall begin from the molecular case, [669]. The decoupling of the nuclear from the electronic motion is made in the adiabatic approximation (see Chap. 4).

404

9 LCAO Calculations of Perfect-crystal Properties

Let ui represents a displacement of the ith cartesian coordinate from its equilibrium value (i = 1, 2, . . . , 3N ), where N is the number of nuclei in a molecule, and qi = √ Mi ui are the generalized coordinate (Mi is the mass of the atom associated with . the ith coordinate) and its derivative with respect to time q i = pi . In the harmonic approximation the classical vibrational Hamiltonian of a polyatomic molecule becomes ⎛ ⎞  1 ⎝ 1 .2 H =T +V = Hij Uj ⎠ + V0 = ( p|p + q|W |q ) + V0 (9.93) Mi u i + 2 2 ij i Here V0 is the electron energy for the equilibrium atomic coordinates, and Hij are the Hessian matrix elements  2  ∂ V 1 (9.94) Hij = 2 ∂ui ∂uj 0 H evaluated at equilibrium. The relation Wij = √ ij

Mi Mj

defines the elements of the

weighted Hessian. The eigenvalues κj of the Hermitian matrix W are the generalized force constants. The Hamiltonian (9.93) then can be factorized into 3N one-dimensional harmonic Hamiltonians  1

H= Pν2 + ων2 Q2ν (9.95) hν = 2 ν ν

Thus each of the 3N −6 vibrational modes can be interpreted as a collective oscillatory √ movement with frequency ων = κν /2π and the problem of calculating vibrational spectra reduces to the diagonalization of matrix W to find the set of eigenvalues κj . For periodic systems, the translation invariance of the potential energy and Hessian matrix should be used. The generalized coordinates obey the Bloch theorem and are written in the form  qi (k) = N exp(−ikg)qig (9.96) g

The vibrational problem is block-factorized into a set of problems (one for each k point in BZ) of dimension 3N − 6 where N is the number of atoms in the primitive unit cell. The k-block of the k-factorized W matrix takes the form Wij (k) =

 g

0g Hij exp(ikg) 4 Mi M j

(9.97)

0g where Hij is the second derivative of potential energy at equilibrium with respect to atom i in the reference cell 0 and atom j in cell g. The number of equations (9.97) to be solved equals the number of k-points in the BZ, i.e. is infinite for the infinite crystal. In practice, the calculations of phonon frequencies are made for a finite number of k-points and the interpolation is used to obtain so-called phonon branches ω1 (k), . . . , ωi (k), . . . , ω3N (k) (like one-electron energies are obtained in SCF calculations for a finite set of k-points and then interpolated to form the electronenergy bands). The relationship between phonon frequencies ω and wavevector k determines the phonon dispersion.

9.3 Total Energy and Related Observables in LCAO Methods for Solids

405

Comparing the vibrational branches and electronic bands calculations we note that in the former case the equations for different k values are solved independently while in the latter case the self-consistent calculation is necessary due to the BZ summation in the HF or KS Hamiltonian (see Chapters 4 and 7). Once the phonon dispersion in a crystal is known, thermodynamic functions can be calculated on the basis of statistical mechanics equations. As an example, the Helmholtz free energy, F , can be obtained as:     1 ℏωik F = (9.98) ℏωik + kB T ln 1 − exp − 2 kB T ik

where the sum is extended to all lattice vibrations, ωik , and kB is the Boltzmann’s constant. Another way of computing thermodynamic functions is based on the use of the phonon density of states. The evolution of the crystal structure as a function of temperature and pressure can also be simulated by minimizing G = F + pV . The procedure requires a sequence of geometry optimizations, and lattice-vibration calculations [568]. Lattice vibrations can be measured experimentally by means of classical vibration spectroscopic techniques (infrared and Raman) or neutron inelastic scattering. However, only the latter technique allows one to measure the full spectrum in a range of k vectors, whereas with infrared and Raman spectroscopy, only lattice vibrations at Γ (k = 0) are usually detected (the second-order spectra, corresponding to nonzero wavevector k = 0 are demanding). The calculations of the vibrational frequencies only at Γ point require the solution of only one equation det |W (0)| = 0,

Wij (0) =

 g

H 0g 4 ij Mi M j

(9.99)

To analyze the symmetry of phonon states the method of induced reps of space groups can be used [13]. The procedure of analysis of the phonon symmetry is the following. First, for the space group G of a given crystal the simple induced reps are generated (see Chap. 3). Second, using the simple induced reps together with the compatibility relations and arranging atoms in the primitive cell over the Wyckoff positions one can determine the symmetry of the phonons. Only those of the induced reps that are induced by the irreps of the site-symmetry groups according to which the components of the vectors of the local atomic displacements transform are used. The total dimension n of the induced rep (called the mechanical representation) equals 3N (N is the number of atoms in the primitive cell). As an example, Table 9.32 shows the phonon symmetry in rutile TiO2 crystal. The results given are easily obtained from the simple induced reps of the space group 14 D4h (see Table 4.5 in [13]) and the atomic arrangement in rutile TiO2 (see Chap. 2). There is a one-to-one correspondence between irreps of crystal point group D4h and irreps of the space group at Γ point: A1g,u − 1± , A2g,u − 3± , B1g,u − 2± , B2g,u − 4± , Eg,u − 5± . The atomic displacements of six atoms in the primitive cell generate the 18-dimensional reducible represntation, which contains three acoustic modes and 15 optical modes (A1g + A2g + A2u + B1g + 2B1u + B2g + Eg + 3Eu ). Three acoustic modes have zero frequency at the Γ point and are associated with the translation of the entire crystal along any direction in space. These branches are called acoustic modes as the corresponding vibrations behave as acoustic waves. The translation of

406

9 LCAO Calculations of Perfect-crystal Properties 14 Table 9.32. Phonon symmetry in rutile TiO2 crystal with space group D4h

q-basis Gq Ti(2a) (000) D2h O(4f) (xx0) C2v

k-basis

Rep. of Gq Γ M b1u (z) 2− ,3− 2− ,3− b2u (x − y) 5− 5− − b3u (x + y) 5 5− a1 (x + y) 1+ ,4+ ,5− 1+ ,4+ ,5− b2 (x − y) 2+ ,3+ ,5− 2+ ,3+ ,5− b1 (z) 2− ,3− ,5+ 2− ,3− ,5+

Z 1 3 4 1,4 2,3 1,3

A 1 3 4 1,4 2,3 1,3

X R 1 1− 2 1− 2 1− 2,2 1+ ,1− 2,2 1+ 1− 1,1 1+ 1−

the entire crystal along the z-axis corresponds to irrep 3− (A2u ) at Γ point, translation in the plane xy – 5− (Eu ). Both acoustic modes are polar and split into transverse A2u (TO) and longitudinal Eu (LO) with different frequencies due to macroscopic electric field. All other branches show finite nonzero frequencies at Γ and are known as optical modes, because they correspond to unit-cell dipole moment oscillations that can interact with an electromagnetic radiation. In the model of a finite crystal the rotation of the entire crystal around the zand xy-axis corresponds to the irreps 3+ and 5+ , respectively, including the displacements of only oxygen atoms, see Table 9.32. As seen from Table 9.32, the phonons of even symmetry (1+ , 2+ , 3+ , 4+ , 5+ ) are connected only with the oxygen-atom displacements. Due to the different atomic masses of oxygen and titanium atoms, the corresponding lines can appear in different parts of the vibrational spectra, making its interpretation easier. The knowledge of phonon symmetry is useful in the analysis of infrared and Raman spectra of solids as the symmetries of active phonons in these spectra are governed by selection rules following from the symmetry restrictions imposed on the transitions matrix elements [13]. Using the symmetry of the phonons found one can establish which vibrational modes are active in the first- and second-order infrared and Raman spectra. The calculation of phonon frequencies of the crystalline structure is one of the fundamental subjects when considering the phase stability, phase transitions, and thermodynamics of crystalline materials. The approaches of ab-initio calculations fall into two classes: the linear response method [670] and the direct method, see [671] and references therein. In the first approach, the dynamical matrix is expressed in terms of the inverse dielectric matrix describing the response of the valence electron-density to a periodic lattice perturbation. For a number of systems the linear-response approach is difficult, since the dielectric matrix must be calculated in terms of the electronic eigenfunctions and eigenvalues of the perfect crystal. There are two variants of the direct method. In the frozen-phonon approach the phonon energy is calculated as a function of the displacement amplitude in terms of the difference in the energies of the distorted and ideal lattices. This approach is restricted to phonons whose wavelength is compatible with the periodic boundary conditions applied to the supercellused in the calculations. Another approach of the direct ∂E method uses the forces ∂u calculated in the total-energy calculations, derives i eq

9.3 Total Energy and Related Observables in LCAO Methods for Solids

407

from them the values of the force-constant matrices and hence the dynamical matrix and phonon-dispersion curves. The majority of calculations were performed based on DFT PW method, for example to study phonons in the rutile structure, [672]. The calculation of the vibrational frequencies of crystals was implemented in the LCAO CRYSTAL06 code (see www.crystal.unito.it) and applied to different oxides: quartz SiO2 [669], corundum Al2 O3 [673], calcite CaCO3 [674]. In the LCAO approximation frequencies at Γ are evaluated in the direct method in the same way as for molecules [669]: a set SCF calculations of the unit cell are performed at the equilibrium geometry and incrementing each of the nuclear coordinates in turn by u (use of symmetry can reduce the number of the required calculations). Second-order energy derivatives are evaluated numerically. Obtaining frequencies at wavevector symmetry points different from Γ would imply the construction of appropriate supercells (see Chap. 3). These supercells are chosen in the same way as was discussed in the electronic-structure calculations due to the one-to one correspondence between the supercell choice and the set of k-points equivalent to the Γ point in the reduced BZ. A finite range of interaction in the lattice sum (9.99) is assumed, usually inside the supercell chosen (compare with the cyclic-cluster model in the electronicstructure calculations). In the case of ionic compounds, long-range Coulomb effects due to coherent displacement of the crystal nuclei are neglected, as a consequence of imposing the periodic boundary conditions [669]. Therefore, Wij (0) needs to be corrected for obtaining the longitudinal optical (LO) modes [675]. For this reason, in some cases only transverse optical (TO) parts of the phonon spectrum are calculated as is done in the combined DFT PW-DFT LCAO lattice dynamics study of TiO2 rutile [676]. The phonon frequencies computed in [676] for optimized crystal structure are reported in Table 9.33 and compared with experimental data. The LDA frequencies are in excellent agreement with the experimental frequencies, especially if compared with the frequencies measured at low temperature (T ∼ 4 K), when these data are available. The deviation between the LDA and experimental frequencies is ∼ 13 cm−1 at most, and is often much smaller than that. For instance, the deviation drops to no more than ∼2 cm−1 for the two stiffest modes, B2g and A1g , and it remains small also for several of the softer modes. Both PBE and PW91 results are much less satisfactory. With the exception of the B1g mode, the GGA functionals systematically underestimate the LDA and measured frequencies. It is found in [676] that this discrepancy between LDA and GGA results is mostly due to the difference in the equilibrium lattice parameters at zero pressure predicted by the functionals. The LDA frequency is the highest because LDA predicts the smallest equilibrium volume, and the PBE equilibrium volume is large enough to lead to an imaginary frequency. All the results discussed were obtained within the plane-wave pseudopotential implementation of DFT. For all functionals, calculations were repeated for the equilibrium geometries, bulk moduli, and energy profiles along the ferroelectric TO A2u mode with the all-electron LCAO scheme. Apart from slight quantitative differences, in all cases the all-electron LCAO calculations agree well with the plane-wave, pseudopotential results, confirming their independence of the particular numerical scheme used to implement DFT. We note that the hybrid HF-DFT LCAO calculations could in principle give better agreement with experimental data for phonon frequencies of rutile as was shown in the B3LYP LCAO calculations of the vibrational spectrum

408

9 LCAO Calculations of Perfect-crystal Properties

Table 9.33. Calculated and measured frequencies (in cm−1 ) relative to the Γ -point of bulk TiO2 rutile ( [676]).* Mode

PBE PW91 LDA Neutrons

IR and Raman Raman

B2g A1g Eg (2) B1g

774.3 565.9 429.2 154.2

780.9 572.0 434.2 151.7

824.7 611.6 463.2 137.0

825 610 445 142

A2g B2u B1u

423.6 425.4 421.7 not found 357.5 363.4 393.0 406 79.2 99.2 104.0 113

827 612 (611) 447 (455) 143 (143) Silent — — —

Infrared Eu (TO) 468.6 472.0 488.4 494 500 388 Eu (TO) 353.5 357.1 383.9 not found Eu (TO) 124.0 127.4 191.4 189 183 167 (144) A2u (TO) 186.3 47.1 154.4 173 (142) ∗ The double degeneracy of the Eg mode is indicated by the label (2). The references to the experimental neutron-scattering and the infrared (IR) and Raman data are given in [676]. When available, the low-temperature (T ∼ 4 K) experimental frequencies are reported in brackets

of calcite CaCO3 , [674]. In this case the mean absolute error is less than 12 cm−1 (frequencies range from 100 to 1600 cm−1 ). As we have seen in this chapter, the HF and DFT LCAO methods, implemented in the computer code CRYSTAL, present efficient computational schemes for the study of different properties of periodic systems. Real-solid properties in many cases depend on the point defects, destroying the translational symmetry. In the next chapter we discuss the models used for defective crystals study and give examples of the LCAO calculations of defective crystals.

10 Modeling and LCAO Calculations of Point Defects in Crystals

10.1 Symmetry and Models of Defective Crystals 10.1.1 Point Defects in Solids and Their Models The theory of perfect crystalline solids explains those bulk properties of crystals that do not depend on boundary effects and other defects of the structure. However, real solids do not demonstrate translational symmetry. Boundaries and other regions of disruption of translational symmetry called defects are always present. Many practical applications of solids are based on the use of the properties caused by defects. By varying the defect structure of solids it is possible to change their physical and chemical properties in such a way that the defective crystals find useful applications. As an example, we mention TiO2 crystal that has been successfully applied as a semiconductor photocatalyst with high oxidizing power and high resistance to photo- and chemical corrosion. However, the relatively large bandgap ( 3 eV) does not permit efficient absorption of visible light and hence prevents TiO2 from being used in largescale environmental applications. Chemical doping of TiO2 allows the bandgap to be reduced. The theoretical study of the doped TiO2 helps to solve the important problem: how to best manipulate the gap while maintaining the beneficial photocatalytic properties [677]. The defects in solids can be classified according to the dimensions of the region of translation symmetry disruption. When one or a few nearest host crystal sites are disturbed, we speak of point (zero-dimensional) defects, called also local defects. Also known are extended defects that introduce structural imperfections in lattice directions - linear (one-dimensional) defects or in the lattice planes (planar or two-dimensional defects). The surface of a crystal and dislocations are the important examples of two-dimensional and linear defects, respectively. The point defects, in turn, are classified as native (intrinsic) and substitution defects. The intrinsic point defects appear as a vacancy (the absence of an atom in a crystal lattice position) or as an interstitial defect (the presence of the host crystal atom in an interstitial position). The host crystal atoms can be substituted for another atom of a different chemical species at a regular lattice site or at the interstitial position (impurity center or substitution defect). The point defects can also be classified as neutral and charged relative to the host crystal lattice. The perturbation of a solid by

410

10 Modeling and LCAO Calculations of Point Defects in Crystals

the charged point defect includes the short-range (local) and long-range (Coulomb) parts. The former is reproduced in the calculations of the sufficiently small fragments of the defective crystal, the calculation of the latter requires special methods, taking into account the polarization of the surrounding crystal by the point defect. In what follows we consider, as examples, LCAO calculations of different types of point defects in oxides: native point defects – interstitial oxygen atom in MgO crystal and neutral oxygen vacancy (F-center) in corundum Al2 O3 and SrTiO3 crystals; substitution defects (vanadium-doped rutile TiO2 crystal, iron impurity in SrTiO3 crystal). The calculations of the charged point defects are demonstrated by a charged oxygen vacancy (F+ center) in corundum Al2 O3 crystal. For low defect concentration it becomes appropriate to model a single point defect in an environment of the remaining solid. In such a model the translation symmetry is completely absent so that the crystal with a single point defect can be seen as a gigantic molecule. However, in the case of a solid solution the single-defect model is not appropriate as the stoichiometry change is introduced by regular substitution of the host-crystal atoms by those of other chemical species. In this case the periodic point-defect model is more appropriate. As an example, we discuss in Sect. 10.3 the modeling of Bax Sr1−x TiO3 solid solutions. The calculational methods of quantum chemistry are widely applied to the point defects in solids. This application is made after the choice of one of the existing defective crystal models, (see Fig. 10.1). 3HUIHFWFU\VWDO SHULRGLFV\VWHP 3ULPLWLYHXQLWFHOO

&U\VWDOZLWKVLQJOHSRLQWGHIHFW DSHULRGLFV\VWHP 0ROHFXODUFOXVWHU PRGHOV

(PEHGGHG FOXVWHU

6DWXUDWHG )UHH FOXVWHU FOXVWHU

0RGHOVZLWKSHULRGLF ERXQGDU\FRQGLWLRQV

&\FOLF FOXVWHU

6XSHUFHOO

++ + +

+ + ++

Fig. 10.1. Defective crystal models

If a single point defect is introduced into an otherwise perfect crystal, the translational symmetry is, in principle, lost completely (see Fig. 10.1), and equations should be solved for all atoms of the solid, i.e. for the aperiodic system [294]. Obviously, the application of some kind of simplified model is desirable. In many cases the electronic states of defects in a crystal are localized in some relatively small region. The degree of this localization depends on the nature of the defect and of the host crystal. The local

10.1 Symmetry and Models of Defective Crystals

411

nature of a single point defect allows a smaller piece of a crystal to be taken (called a cluster) but its size must be chosen in such a way that there is at least one shell of atoms between the defect zone and the cluster surface that remains undisturbed. The obvious way is to separate the part of the crystal perturbed by the defect from the still crystalline background, and treat only the former in an explicit manner. On the one hand, the need for economizing calls for a model consisting of as few atoms as possible. On the other, the explicitly treated part of the crystal should, in principle, extend far enough for the effect of the defect to become negligible [294]. This means, up to the point where the amplitude of the localized wavefunctions, the deviations of charge density and of host-atom positions relative to the unperturbed case become close to zero. In practice, this is assumed to be for a group of atoms around the defect (cluster). The three criteria above are almost never satisfied to a necessary degree with clusters that can be sequeezed into the computer. Therefore, at least some kind of convergence test in all three respects is proper. The electronic structure of the molecular cluster can be calculated using any of the methods developed for the molecules. However, the problem arises at the molecular cluster surface, i.e. with the representation of the rest of the crystal. As is shown schematically in Fig. 10.1, there are different possibilities for this representation. In molecular-cluster models the group of atoms chosen is embedded into the crystalline environment (embedded-cluster model) or the cluster surface atoms are saturated by hydrogen or other species atoms (saturated-cluster model). In the most crude model the free cluster (neutral or charged) is chosen. The models with periodic boundary conditions (the supercell and the cyclic-cluster models) allow calculation of the one-electron states of perfect and defective crystals at the same level of approximation. The supercell model (SCM) and cyclic-cluster model (CCM) have both similarities and discrepancies. One similarity is that in both models not a standard primitive unit cell but an extended unit cell (supercell or large unit cell) is considered. The discrepancy is that the periodic boundary conditions in the SCM are introduced for the infinite crystal or its main region, but in the CCM model – for the extended unit cell itself. The calculation schemes usually used for point defect include: 1. the choice of the model of the defective crystal; 2. the choice of the Hamiltonian (Hartree–Fock, DFT or hybrid, semiempirical); 3. the choice of the basis for the one-electron Bloch functions decomposition – linear combination of atomic orbitals (LCAO) or plane waves (PW). SCM is used as a rule for the neutral-point-defects calculations (for the charged point defects the field of periodically repeated charge has to be suppressed in one or another way). The molecular- and cyclic-cluster models are more universal as they can be applied both for the neutral and charged point defects. In the SCM the calculations with HF or hybrid Hamiltonians are made in the LCAO approximation, DFT Hamiltonians are used both in the LCAO and PW representations. CCM can be practically realized with the semiempirical LCAO Hamiltonians. In SCM we let the defects be situated periodically and try to make the separation between defects as large as possible. If the extended unit cell is large enough the defects are separated by large distances and do not affect each other’s electron structure so that the results of the application of SCM and CCM models become close. The bandwidth of defect states depends primarily on the degree of overlap of the functions

412

10 Modeling and LCAO Calculations of Point Defects in Crystals

describing the defect electron states from different supercells and decreases rapidly with increasing defect period. Therefore, this bandwidth can be used as the criterion of the convergence of the SCM results to those of CCM. The cyclic-cluster model is conceptually a supercell-type approach but is technically more closely related to the simple molecular-cluster model. SCM introduces the artificial point-defect periodicity, CCM describes the single point defect. All the approaches to the theoretical description of defective crystals use information about the symmetry of the system or its model. As mentioned above, a single defect embedded in a crystal disrupts the translational symmetry of a perfect crystal so that it may be considered as a gigantic molecule with a point-symmetry group inherent to molecules. There are two cases: an atomic type point defect, which occupies one point of a crystal lattice or an interstitial position and can be a substitutional impurity, vacancy or interstitial atom; and a molecular type point defect, which occupies several atomic or interstitial points of a crystal lattice and can be composed of an impurity molecule or a cluster of several vacancies at neighboring lattice points. In the first case the symmetry group of the defect crystal is fully determined by the site symmetry of the point q where the atomic defect appears. In a crystal with a symmorphic space group the atomic defect may occupy the position q with the symmetry of the crystal class or one of its subgroups. In nonsymmorphic crystals the point group of the crystal with a single point defect of atomic type is always a subgroup of the crystal class. In a crystal with point defects of molecular type the center of the impurity molecule is situated at a point with some site symmetry. A molecular defect has its own point symmetry so that the point symmetry of the whole system is determined by the common elements of two groups: the point group of the isolated molecule and the site-symmetry group of the site where the impurity molecule is situated. However, it is necessary to also take into account the orientation of the impurity molecule with respect to the crystal symmetry axes. It can be assumed that when a point defect appears the configuration of the crystal matrix around the defect does not change (the model of a rigid lattice). In reality, this assumption is approximately correct only for some point defects and as a rule only for the ground electron state. Excitation of the defect electrons causes significant reconstruction of the defect’s surroundings so that the point symmetry of the entire system may change. In many calculations, the distortion of the crystal lattice by a defect is at first neglected. Then, this distortion is taken into account with approximate wavefunctions obtained for the rigid-lattice model. Therefore, initially, the symmetry is approximated in the framework of the rigid-lattice model. The knowledge of the actual symmetry of a crystal with a point defect is necessary for correct understanding of all its properties: the symmetry determines the selection rules for optical transitions in the defect, the symmetry and the splitting of local energy levels in external fields, the features of EPR and NMR spectra, etc. To understand the nature of a point defect in a crystal and the degree of its influence on the properties of the crystal matrix it is necessary to relate the local energy levels of the defect to the energy-band structure of the perfect crystal. But these two systems (crystal with defect and perfect crystal) have different symmetries and the classification of electron states is made according to irreps of either a point group (for a crystal with a single defect) or a space group (for a perfect crystal).

10.1 Symmetry and Models of Defective Crystals

413

In the molecular-cluster model it is rather easy to establish the relationship between energy levels and one-electron states of a molecular cluster with and without a point defect. The symmetries of both systems are described either by the same point group or by a point group that is a subgroup of the other (in the case of a moleculartype defect). Hence, in the cluster model the relationship between the classification schemes of electron energy levels and states of perfect and imperfect crystals is simple. But the relationship between the cluster electron energy structure and that of a perfect crystal is much more complicated. In the models using PBC the application of the site-symmetry approach is quite useful [13]. The single-defect localized electron states of a given energy level span the space of an irrep of defect point-symmetry group FD . The band states of a perfect crystal are classified according to irreps of the space group G. It is useful to determine which band and localized states are allowed by symmetry to mix (e.g. , for calculating the electron structure from atomic basis functions). We consider the appearance of a point defect as a perturbation of a perfect crystal. According to perturbation theory, only states with the same symmetry may interact with one another. The common symmetry group of both systems is FD ⊂ G. Let β be an irrep of FD that describes one of the defect states. To establish the possibility of its mixing with the perfect crystal states of symmetry D(∗kγ) it is sufficient to know whether the restriction D(∗kγ) ↓ FD contains the irrep β. If the state of symmetry D(∗k0 γ) does not contain the state of symmetry β, then the contribution of the states with k near k0 is small according to the perturbation theory, although it is not equal to zero due to the symmetry. As an example, let us consider the s-states of an impurity at a cation site (Wyckoff position a, site group D2h s-state has symmetry ag ) or at an anion site (Wyckoff position f , site group C2v , s-state has symmetry a1 ) in rutile TiO2 . From band calculations we know the symmetry of states on the boundaries of the forbidden gap in a rutile TiO2 crystal (see Chap. 9): Γ1+ (the bottom of the lowest conduction band) and Γ3+ (the top of the highest 14 valence band). From the table of induced representations of the space group D4h we (a) (a) + + find Γ1 ↓ D2h = ag ; Γ3 ↓ D2h = b1g , i.e. the s-states of an impurity may mix with the states of the bottom of the lowest conduction band, but not with the states of the top of the uppermost valence band. The anion site is at the Wyckoff position f (f ) (f ) (Ff = C2v ). We get Γ1+ ↓ C2v = a1 ; Γ3+ ↓ C2v = b2 , i.e. the s-states of an impurity at an anion site may mix with the states of the bottom of the lowest conduction band but not with the states of the top of the uppermost valence band. From this consideration it follows that the defect local levels due to the s-states of the impurity both at Ti and O sites split from the conduction-band bottom. Such information is useful for the study of doping influence on the rutile crystal bulk properties. In the next sections we consider in more detail the defective-crystal models mentioned above. 10.1.2 Symmetry of Supercell Model of Defective Crystals The recent trends in the theory of the point defects in solids and of the crystalline surfaces, formally aperiodic systems, are connected with the widespread application of periodic boundary conditions (PBC) and computer codes developed for the perfect crystals, see [568, 678, 679] and references therein. This allows one to use the same numerical schemes both for the host and defective crystal to study changes induced

414

10 Modeling and LCAO Calculations of Point Defects in Crystals

by a point defect or surface: additional local energy levels in the optical gap, lattice relaxation around defects, etc . As was noted above, in the theory of point defects two models with PBC are used: the supercell model (SCM) and the cyclic-cluster model (CCM). The application of the supercell model to the defective crystals requires consideration of periodic systems with a sufficiently large number of atoms in the unit cell. The possibilities of the supercell model extend if the full symmetry of the object is taken into consideration. It was demonstrated [681–683] that the study of the symmetry of a crystal with a periodic defect permits, in some cases, investigation of the dependence of the results of electronic-structure calculations on the period of a defect by only changing the symmetry of the system without any augmentation of the supercell. The symmetry of the crystal with a periodic defect is determined by the site symmetry of the defect in the crystal and by the symmetry of the host-crystal matrix. Let a point defect (impurity atom or molecule, one or a few vacancies) occupy a position q in a perfect crystal with a space group G (crystal class F). A site-symmetry group of the defect in the crystal SD consists of common elements of two groups: of (0) the symmetry group SD of the defect itself and the site-symmetry group Sq of the position q in the crystal occupied by the defect. The group SD depends on the mutual (0) orientation of the symmetry elements of the groups SD and Sq . Let us consider now a periodic structure that arises in the supercell model when the embedded defect is periodically repeated and occupies in this structure some position Q with site-symmetry group SQ = SD . The symmetry of the obtained periodic structure is characterized by some space group GD . One seeks for all the possible space groups GD = TA FD of the defective crystal for a given host crystal (space group G) and for a given point defect in the crystal (point group SD ). Here, translation group TA includes translations A of the supercell. Some symmetry operations disappear when one goes from the space group G to the space group GD . Therefore, the group GD has to be a subgroup of GD ⊆ G with a crystal class satisfying the condition SD ⊆ FD ⊆ F. The possible space groups GD of the crystal class FD are those that have the group SD as a site-symmetry subgroup. In this way, one obtains the list of space groups GD that may describe the symmetry of the supercell model of a defective crystal for a given site symmetry SD of the embedded defect and space group G of a host crystal. In the framework of the same space group GD the periodical structures may differ by the length of supercell basic translation vectors A1 , A2 , A3 for the same type of Bravais lattice. These vectors have a definite orientation with respect to the symmetry elements of the group GD , and sometimes there is a definite relation between their lengths. In addition, they have to be integer linear combinations, see (4.77), of basic translation vectors of the host perfect crystal. This combination defines the transformation matrix l with the determinant L (the number of primitive unit cells in the supercell). As was noted, this transformation is called a symmetric one if the point symmetry of the Bravais lattice of supercells is the same as that of the host-crystal Bravais lattice, see Chap. 4. Use of the symmetric transformation for the supercell generation allows the point symmetry of the defective crystal in the supercell model to be maintained as high as possible. These conditions determine the matrix l, i.e. the translational subgroup TA of the symmetry group GD . Finally, it is necessary to verify whether the obtained group GD is a subgroup of the symmetry group of the

10.1 Symmetry and Models of Defective Crystals

415

host crystal. This condition assures that all the atoms of the system transform into ) D ⊂ G, then GD = G ) D ; if themselves under the operations of the group GD . If G ) D has to be excluded from the list of the possible groups GD ⊂ G, then the group G GD . Finally, the generation of the possible space groups with a periodical defect in the supercell model consists of the following steps [683]: (i) determination of the site group SD of the defect in the crystal; (ii) determination of the crystal classes satisfying the condition SD ⊆ FD ⊆ F; (iii) determination in the space groups of these classes those that have the site-symmetry subgroups SD ; (iv) generation of the matrix l and the supercell translation vectors Ai by symmetric transformation of the host crystal basic translations; (v) verification of the condition GD ⊆ G. The groups GD of a supercell model with one point defect for a supercell are symmorphic, they belong to the crystal class FD = SD with all the types of crystal lattices possible for this crystal class. The point symmetry of the cyclic-cluster coincides for the host crystal – with the point-symmetry group F, for the defective crystal – with the point-symmetry group SD . Let us consider some examples. In MgO crystal the supercells, containing 8, 16 and 32 atoms (S8, S16, S32), are obtained by a linear symmetric transformation of the fcc lattice basic translation vectors with matrices ⎞ ⎛ ⎛ ⎞ ⎛ ⎞ 200 3 −1 −1 1 1 −1 l(4) = ⎝ 1 −1 1 ⎠ , l(8) = ⎝0 2 0⎠ , l(16) = ⎝−1 3 −1⎠ 002 −1 −1 3 −1 1 1 Superscript (n) in l(n) denotes the number of primitive unit cells in the supercell. The supercell translation vectors for A1 , A2 , and A3 for l(4) , l(8) , l(16) correspond to simple cubic, face-centered-cubic, and body-centered-cubic lattices, respectively. The host crystals, consisting of the corresponding supercells, have the symmetry of cubic space groups Oh1 , Oh5 , and Oh9 , respectively. For the isoelectronic Be, Ca impurities in the Mg site the site-symmetry group coincides with the point-symmetry group of the host crystal, i.e. the space groups of the defective crystals are the same as for the host crystal. The Li impurity atom is displaced from the Mg site along the fourth order symmetry axis (the Li atom site symmetry is C4v ). As a result, the space groups (1) (9) (9) of the defective crystal are now tetragonal – C4v , C4v , and C4v , respectively (the face-centered lattice is absent in the tetragonal system). An additional neutral interstitial oxygen Oi atom as a point defect in MgO crystal can have several configurations. In three of these (called v, f , and e) the oxygen atom is at the volume, face, or edge centers, respectively, of the cubic unit cell. Fig. 10.2 shows volume-(a), face-(b) centered configurations and a (110)-oriented dumbbell (see below) configuration (c). The point symmetry of the v, f and e configurations is Td , D2h , and C4v , respectively. The space groups for MgO with these centers in the supercell model depend on the supercell chosen and they are given in Table 10.1. The other three configurations vd, f d, and ed are so-called dumbbell-shaped defects formed when the Oi is moved towards a nearest-neighbor O2− lattice anion along , , or directions, respectively, the lattice anion being simultaneously displaced from its site along the same direction. The center of the dumbbell is at the lattice site, and the point symmetry of these defects is D3d , D2h , and D4h , respectively. The space

416

10 Modeling and LCAO Calculations of Point Defects in Crystals

Fig. 10.2. Configurations of the interstitial oxygen atom in MgO

groups of MgO containing these defects are given in the last three lines of Table 10.1. The results of Table 10.1 were obtained using the list of subgroups of the space groups given on the Internet site www.cryst.ehu.es. For example, the supercell transformation with the matrix l(4) changes the host-crystal space group from Oh5 to Oh1 . Choosing from the list of subgroups of space group Oh1 those symmorphic subgroups that refer to the crystal class Td (point symmetry of the v configuration), we obtain directly the result given in the third column of Table 10.1. Table 10.1. Space-group symmetry for the supercell model of an oxygen-atom interstitial Oi in MgO crystal [682] Supercells Center FD l(4) l(8) l(16) 1 2 3 v Td Td (215) Td (216) Td (217) f

19 25 25 D2h D2h (65) D2h (71) D2h (71)

e

1 9 9 C4v C4v (99) C4v (107) C4v (107)

vd

5 5 5 D3d D3d (166) D3d (166) D3d (166)

fd

19 25 23 D2h D2h (65) D2h (71) D2h (69)

ed

1 17 17 D4h D4h (123) D4h (139) D4h (139)

The next example – the impurity atom on the Ti site of rutile structure with the 14 space group D4h . There are two titanium atoms in the primitive unit cell, occupying the two-site Wyckoff position a with coordinates (000) and ( 12 12 12 ). An impurity atom replaces a Ti atom with the site symmetry D2h . Therefore, the space group of the defective crystal belongs to the crystal class D2h . Four possible symmetric supercell 14 transformations for the space group D4h are given in Table 6.3. The first of them maintains the simple tetragonal lattice of the host crystal, the other three transform it to the body-centered tetragonal lattice. Respectively, the possible symmetry groups 1 19 23 25 of the defective crystal are the following: D2h , D2h , D2h , D2h .

10.1 Symmetry and Models of Defective Crystals

417

In the Ti atom site-symmetry group two of three second-order axes are directed along the diagonals of the square, see Chap. 2. In the standard setting of the space groups with D2h point symmetry all the three second-order axes are directed along the Cartesian coordinate axes. This difference must be taken into account [683]. The point symmetry of the cyclic-cluster model coincides with point groups F and FD for the host and defective crystal. 10.1.3 Supercell and Cyclic-cluster Models of Neutral and Charged Point Defects In the point-defect calculations there are two criteria to be met: the model used for solving the quantum-mechanical problem has to describe sufficiently well both (i) the extended crystalline states and (ii) the localized states of a single point defect. The CCM can be defined from the two points of view: it can be regarded either as the application of the Born– von Karman cyclic boundary conditions directly to the large unit cell (supercell), or as the band-structure calculation on SCM with (A) applying the k = 0 approximation, and (B) neglecting interactions beyond the Wigner–Seitz cell corresponding to the supercell chosen. The SCM have no restrictions like A and B and thus CCM could be considered as a special approximation to the SCM. The economic approach to a single-point-defect study in a model with PBC consists of three stages [680]. In stage 1 the band-structure calculation of a perfect crystal is performed, in order to fix the shape and size of the supercell that reasonably models the host crystal, i.e. when the above-described condition (i) is met. These calculations are made using a primitive unit cell and k-sampling in the usual (primitive) BZ. The one-to-one correspondence was demonstrated between a fixed k-mesh and the supercell in a real space, see Equations (4.77), (4.80) and (4.84). Due to the one-toone correspondence between k-point sampling and the supercell size in a real space it is possible to find such a k-mesh that ensures a compromise between its size and a reasonable reproduction of the total- and one-electron energies, as well as the electrondensity distribution in the host crystal. At this stage, the k-point sets satisfying (4.84) are used. In stage 2 the calculations are made for a defective crystal using SCM, in order to check the above-described criterion (ii). It is reasonable to begin from the smallest supercell, chosen at stage 1, i.e. corresponding to the converged results of the band calculations. The supercell shape should be such as to exploit the point symmetry of the defect as far as possible. In the particular case of the cubic SrTiO3 crystal cubic supercell of 80 atoms (L = 2 × 2 × 2, the diagonal matrix l in transformation (4.77) is taken) may be used for a perfect crystal in the HF calculations but larger supercells are necessary in the DFT-PWGGA calculations [680]. When estimating the defect– defect interaction from the calculated defect bandwidth in the second stage, one makes a decision about the need for a further increase of the supercell. In particular, the Fe impurity at the Ti site bandwidth in the HF calculations still changes when the supercell is increased from 80 to 160 atoms [680]. This means that the local states induced by the point defect are sufficiently well localized only in the larger, 160-atom supercell [680]. That is, in stage 2 the comparison of supercell results for different k-meshes allows us to decide if it is necessary to further increase a supercell, in order

418

10 Modeling and LCAO Calculations of Point Defects in Crystals

to surpass artificial defect–defect interaction. When energies at k = 0 and nonzero k supercell calculations turn out to be close, this means that the corresponding cyclic cluster is appropriate for the single-point-defect study as CCM corresponds to the Γ point only consideration for the supercell chosen. In the most time-consuming stage 3 the CCM is used (i.e. the band-structure calculations for the chosen supercell are performed only at k = 0) for the determination of the equilibrium geometry, i.e. relaxation of the crystalline lattice around the point defect and calculation of other defective crystal properties. As is seen, the approach described combines both supercell and cyclic-cluster models of the defective crystal and differs from the traditional supercell calculations by an attempt to exclude in stage 3 the spurious point-defect periodicity. This exclusion allows us formally to escape periodic repeating of the crystalline lattice relaxation around the point defect. Furthermore, the different charge states of the point defect could be also considered in stage 3 without principal difficulties since in CCM the charge is not periodically repeated over the lattice. The defect-formation energy is an important property of the defective crystal. The formation energy ∆Ef of a neutral defect in CCM is given by ∆Ef = Ed − EB + ER − EA

(10.1)

where EB is the bulk-crystal total energy, Ed is the total energy of the cyclic cluster with the point defect, EA and ER the energies of the added and removed species, respectively. The bulk crystal energy EB = LE (0) , where L is the number of primitive cells in the cyclic cluster and E (0) is the energy per primitive cell. As an example, for ionic MgO crystal the formation energy of X substitution impurities (X=Ca, Be substitutes Mg atom), [684], can be given in terms of the isolated atoms or isolated ions (0) L ∆EX = EMgO−X − LEMgO + EMg2+ − EX 2+ (10.2) (0)

L ∆EX = EMgO−X − LEMgO + EMg − EX

(10.3)

When the relaxation is taken into account (shifting of some nuclei around a defect from a reference bulk-crystal situation) the total energy Ed is corrected by the relaxation energy Erel . The oxygen-removal energy for MgO crystal ∆Ef (formation energy of neutral oxygen vacancy, also called an F center) is defined as the energy of the system, containing the F center, plus the energy of an isolated oxygen atom minus the energy of the perfect crystal [685]. In the LCAO approximation the energies of added or removed atoms are calculated in the same numerical scheme that is used for the bulk and defective crystal calculation (the atomic basis is used that is appropriate for a free atom, see Chap. 9). In PW calculations the energy of the isolated atom is obtained by calculations on a number of periodic systems, containing one atom per increasing supercells, and the final size of the supercell is taken large enough to ensure that the interaction between atoms introduces a sufficiently small error (this error was 0.01 eV in calculations [685]). Within the supercell approach, ∆Ef should tend to a welldefined limit with increasing supercell size. For a defect to be considered as single, sufficiently large supercells must be adopted to avoid spurious interactions among neighboring defects.

10.1 Symmetry and Models of Defective Crystals

419

In the SCM (CCM) models two finite energies are compared when determining the defect-formation energy: they are the total energies per unit supercell of the two crystals (perfect and defective). In view of the large energies involved, it is important that the same cell be used for the perfect and defective crystals to ensure cancelation of errors. As an example, we consider the convergence of the LCAO HF AE supercell calculations of Ca and Ba atom subsitution in bulk MgO, the details of the computational scheme used can be found in [684]. In Table 10.2 the substitution energies are given as a function of the supercell size for nonrelaxed and relaxed defective lattice. The supercells of 8, 16 and 32 atoms correspond to the host crystal fcc lattice vector transformations, giving simple, face-centered and body-centered cubic lattices of supercells with L=4, 8, 16 (8, 16 and 32 atoms), respectively(see Sect. 10.1.2). Table 10.2 shows that in an unrelaxed lattice the increasing of the supercell from 8 to 32 atoms changes the defect-formation energy from 0.11 eV (Ca substitution) and 0.02 eV (Be substitution). It is also seen that for the largest supercell the Ca substitutional energy reduces from 7.09 eV to 6.43 eV when the first star of neighbors (six O ions) is allowed to relax; a further energy gain of 0.19 eV is obtained after allowing the second neighbors (12 Mg ions) to relax, the total relaxation energy, 0.84 eV, being substantial. In the case of the Be substitution, the relaxation energy, 0.27 eV, is considerably smaller. In the Be case the displacements are smaller and in the opposite direction to those for the Ca substitution, but the pattern is otherwise qualitatively siimilar. Thus, quite small unit cells appear to be able to describe the effect of electronic rearrangement. In contrast, Table 10.2 indicates that nuclear-positional relaxation is much more long ranged, at least for fully ionic compounds such as MgO. Table 10.2. Ca and Be HF substitutional energies ∆Ef (in eV) in MgO as a function of the size of the supercell. M is the number of atoms in the supercell, ∆R is the variation (in ˚ A) of the distance between the defect and its first (6O) and second (12Mg) [684]

M 8 16 32 16 32 32

∆Ef 7.20 7.12 7.09 6.56 6.43 6.25

Ca ∆R First(6O) Second(12Mg) — — — — — — 0.073 — 0.084 — 0.097 0.031

∆Ef –3.81 –3.80 –3.83 –3.93 –4.00 –4.10

Be ∆R First(6O) Second(12Mg) — — — — — — –0.044 — –0.053 — –0.070 –0.022

The dependence of the defect-calculation results on the supercell size in MgO was obtained for oxygen atom removal energies in DFT PW calculations [685]: increasing of the supercell from 8 to 64 atoms changed the defect-formation energy from 10.656 eV to 10.568 eV in unrelaxed lattice and from 10.553 eV to 10.547 eV for the relaxed lattice. In this case, the effect of relaxation appeared to be completely negligible. The convergence of the results with the supercell size is strongly dependent on the point-defect nature. Ca and Be substitutions of Mg atom in MgO are examples

420

10 Modeling and LCAO Calculations of Point Defects in Crystals

of isoelectronic substitution, giving small impurity-atom displacement from the substituted atom site. However, in the case of the MO : X point defect (M=Mg, Ca, Sr; X = H, Li, Na, K) this displacement becomes large due the difference between the host and substitution atoms. The difference in the number of valence electrons in M and X atoms (two and one, respectively) is called hole trapping. Ionizing radiation produces a variety of trapped hole centers in metal oxides, both alkaline-earth oxides and perovskite-type compounds. As a result of the impurity-atom displacement the point defect in MgO has axial symmetry along one of the fourth-order symmetry axes of the cubic lattice. This lowering of the crystalline symmetry from cubic to tetragonal generates a dipole moment within the cell. A long-range dipolar defect–defect interaction then originates among defects in neighboring cells, and larger supercells are needed to obtain the converged results. As an example, the defect formation energy of the MgO : Li center in UHF calculations (for the Li only relaxation taken into account) changes with the supercell increase are the following [568]:4.82 eV(8), 4.99eV(16), 5.06eV(32), 5.10eV(64). Here, the number of atoms in the supercell is given in brackets. When all the atoms in the supercell are allowed to relax, the defect-formation energy changes (in the calculations of the largest supercell of 64 atoms) from 5.43 eV (unrelaxed) to 4.15 eV (fully relaxed). The comparison with the data given in Table 10.2, demonstrates that for the hole-trapping center the convergence is slower than for isoelectronic substitution and the geometry optimization plays a crucial role for the hole-trapping center: the difference in the defect-formation energy for fully relaxed and nonrelaxed largest supercells is 0.84 eV (Ca substitution), 0.27 eV (Be substitution) and 1.28 eV for the hole-trapping center. The atomic relaxations themselves are especially large for the Li atom (about 0.3 ˚ A). It was found [568] that in the fully relaxed case, the convergence of the defect-formation energy is much faster (0.03 eV in going from a supercell of 8 atoms to one of 64 atoms) that shows that structural relaxation is an effective mechanism to screen and minimize long-range electrostatic interactions induced by the dipolar nature of the defect center. When the alkali-metal ion replaces an alkaline-earth cation, it relaxes from the perfect lattice position toward the oxygen ion (O2) along the axial direction, which brings a formal +2 charge; the electron hole localizes at the opposite oxygen (O1), which in turn relaxes away from the X monovalent ion. However, this relaxation is periodically repeated, and it would be desirable to compare its role for the supercell calculations at the center and symmetry points of the BZ. The supercell calculations give important information concerning the charge redistribution in the defective crystal. In particular, the UHF electronic structure of the trapped-hole defect MgO : [Li]0 indicates the localization of the unpaired electron at the O1 atom [568]. However, the degree of localization is quantified by the spin moment of O1 and changes significantly when different Hamiltonians are considered: the spin moment decreases from 0.98 at the UHF level, to 0.41 for B3LYP, to about 0.1 with other DFT Hamiltonians [568]. The different degree of localization produced by DFT methods has important consequences for the atomic relaxation. Magnetic coupling constants determined by EPR and ENDOR techniques permit a direct comparison with experimental data to be made. In the particular case of the Li defect, the agreement is reasonable for the UHF result, where the hole is localized at O1. For

10.1 Symmetry and Models of Defective Crystals

421

the other Hamiltonians, the disagreement increases in parallel with the delocalization of the hole [568]. In PW calculations of defective crystals the use of PBC is the only possibility in the model choice. Apart from the problem of getting rid of interactions between defects by considering sufficiently large cells or by introducing corrections by averaging over the sampled k-points [686], the supercell technique seems to provide a natural “universal” reference for the neutral point defects in crystals: the two structures that are compared satisfy the same boundary conditions, and the two wavefunctions (or density matrices) differ only in the vicinity of the defect in each supercell [687]. This is, however, no longer true when charged defects are considered. The artificial longrange Coulomb interactions between the periodic charged defect images introduce the divergence in the energy. The problem of the neutrality of the periodic array of charged defects is solved by superimposing a neutralizing charge uniformly spread in each supercell (a uniform, neutralizing “jellium” background charge is introduced to restore the electroneutrality of the unit cell). It is also necessary to correct the defect-formation energy using an estimate of the dielectric response of the host system to the periodic ensemble of neutralized defects. While the self-energy of this charge becomes vanishingly small with increasing supercell size, this is not true for its interaction with the host crystal. Polarization of the crystalline medium by the local charge could be taken into account by allowing full relaxation of nuclear positions with very large supercell sizes. This is impossible in practice, and the corresponding finite contribution to the stabilization of the defect must be evaluated separately. With “reasonable” supercell sizes, it is necessary to correct for the interaction between charged defects. This correction can be performed classically, using the experimental ε static dielectric constant [688]. However, using the experimental ε value makes the model inconsistent, not only because of the semiempirical character of this assumption, but also because use of the static dielectric constant would imply full relaxation of electrons and nuclei in the field of the defect charge, while use of the optical dielectric constant would require that no nuclear relaxation takes place [687]. To calculate the charged point defect formation energy in SCM some other correction schemes are suggested, [689–692]. These schemes were applied for the supercell calculations of point defects in semiconductors: tetrahedral – Si [690], diamond [693], InP [692], SiC [691] and hexagonal –AlN [694], GaN [695]. LCAO calculations of the charged point defects in metal oxides are made mainly in the molecular-cluster model, considered in the next section. As we already noted PW molecular-cluster calculations are impossible as use of the PW basis requires the periodicity of the structure under consideration. 10.1.4 Molecular-cluster Models of Defective Solids The molecular-cluster model (MCM) of the defective crystal is the simplest and most direct approach. As was already noted, MCM is obtained by cutting out in the crystal some fraction of atoms consisting of the point defect and several spheres of nearest neighbors, followed by an embedding of this cluster into the field of the surrounding crystal and (or) by saturating with the pseudoatoms the dangling bonds on the cluster surface. The embedding pseudopotential can also be used (see Sect. 8.2.3). The main attractive features of a cluster model are the following: the simplicity of the mathematical formulation; the possibility of direct transfer of computational

422

10 Modeling and LCAO Calculations of Point Defects in Crystals

schemes, worked out in quantum chemistry of molecules; and applicability to almost all types of solids and point defects in them. A reasonable choice of cluster is possible when well-localized point defects are considered [696]. There are well-known [294] difficulties of the cluster model connected with changes of host-crystal symmetry, pseudoatom choice at the cluster boundaries and the necessity to consider nonstoichiometric (charged) clusters. The validity of the results obtained within the cluster approach is often questionable due to some serious drawbacks: the strong unpredictable influence of the cluster shape and size on the results of calculations; the difficulties arising when relating the cluster one-electron energy levels with the band energies of the perfect crystal; and the appearance of “pseudosurface” states in the one-electron energy spectrum of the cluster. The appearance of the “pseudosurface” states is accompanied by the unrealistic distortion of electronic density on the cluster boundaries and can lead to artefactual resonances between the “pseudosurface” and the point defect one-electron states. In order to make the cluster model more realistic, a large number of embedding schemes have been developed. Most of them are oriented on special types of crystal (ionic, simple covalent) or are based on the use of special approximations in the Hamiltonian operator (local exchange, tight-binding approximations). The other group of cluster models is based on adding the effective-potential operator (the embedding operator) to the unperturbed-cluster Hartree–Fock operator, giving the proper oneelectron solution for the perfect crystal. When the cluster shape and size are chosen, this embedding operator can be determined and used in the following perturbedcluster calculations. This so-called embedded-cluster approach is sufficiently general and can be applied to different types of solids. The only characteristic that to a certain extent depends on the nature of the solid and local center in it is the minimal appropriate cluster size. This size is limited by the extent of localization of one-electron states in the perturbed and nonperturbed solid. At the same time the extent of the defect-potential localization is not so critical if the cluster is chosen in such a way that the long-range polarization outside the cluster can be taken into account. The use of localized orbitals for the cluster calculation is an efficient approach for defective crystals. To connect the perfect crystal localized orbitals and molecular cluster one-electron states the molecular cluster having the shape of a supercell was considered [699]. Such a cluster differs from the cyclic cluster by the absence of PBC introduction for the one-electron states. Evidently, the molecular cluster chosen is neutral and stoichiometric but its point symmetry can be lower than that of the cyclic cluster. Let the localized orthogonal crystalline orbitals (Wannier functions) be defined for the infinite crystal composed of supercells. The corresponding BZ is L-times reduced (the supercell is supposed to consist of L primitive unit cells). The Wannier functions Wn (r − Ai ) are now introduced for the supercells with the translation vectors and satisfy the following equation:  ˆ n (r − Ai ) = HW εn (Al − Ai ) (10.4) Al

ˆ is the one-electron Hamiltonian of the crystal, Here, H 1  En (k′ ) exp(ikAl ) εn (Al ) = √ N k′

(10.5)

10.1 Symmetry and Models of Defective Crystals

423

are the Fourier coefficients of the energy En (k′ ) of the nth band. The range of k′ summation, numbering of energy bands and the coefficients εn (Al ) in (10.5) correspond to the supercell chosen, N is the number of supercells in the macrocrystal. Let and maximum values of the energy in the nth band. Enmin , Enmax be the minimum

Introducing ∆En = 12 Enmax − Enmin and En = Enmin + ∆En we get    1   ′ ′ (En (k ) − En ) exp(ik Al ) ≤   N ′ k

1 ≤ · N · max {|En (k′ ) − En || exp(ik′ Al )|} ≤ N 3 ( ≤ max |En (k′ ) − Enmin − ∆E| ≤ ∆En

The inequality obtained

      ′ ′ (En (k ) − En ) exp(ik Al ) ≤ ∆En   ′ 

1 N

(10.6)

k

is fulfilled for any choice of the supercell, defining the translation vectors Al , the range of k′ summation and the band numbering. For any choice of the supercell exp(ik′ Al ) = N · δAl 0 . Using (10.6) we have the relation k′

|ε(Al ) − En δAl 0 | ≤ ∆En

(10.7)

that can be rewritten as |ε(0) − En | ≤ ∆En ,

|ε(Al )| ≤ ∆En

(10.8)

Hence ε(Al ) → 0,

ε(0) → En ∆En → 0

(10.9)

On increasing the size of the supercell one can approach the limits in (10.9) as closely as desired. When the size of the supercell increases, the number of energy bands in some fixed energy interval ∆E increases proportionally, and the width ∆En of the nth band decreases. From (10.8) it follows that the narrower the energy bands of the perfect crystal (in the usual band numbering for the primitive cell), the smaller will be the unit cell for which one can neglect on the right side of (10.4) all the terms with Al = Ai and consider the approximate equation ˆW ! (r − Ai ) = εn (0)W ! (r − Ai ) H

(10.10)

This equation is written for the Wannier function of the ith supercell. Due to (10.9) εn (0) can be considered as the average energy of the nth band (in the supercell classification of crystalline states). In fact, (10.10) corresponds to the molecular cluster having the shape of the supercell. The Bloch functions of the macrocrystal can be constructed from the cluster one-electron states:

424

10 Modeling and LCAO Calculations of Point Defects in Crystals

Ψn (k, r) =

1  ! (r − Al ) exp(ikRl )W N

(10.11)

Rl

This consideration is the foundation of the approach originally called “the cyclically embedded cluster” model [697]: the crystal is divided into the sets of regions chosen in the shape of a Wigner–Seitz supercell of the perfect crystal. The central region A contains the defect with its surrounding, the other regions together form the rest of the crystal. We refer the reader to [697] for the mathematical details of this approach. We note only that in the limit when the region A is the whole crystal this model gives the traditional HF LCAO equations for a defective crystal considered as a large molecule. In the other limit, when the defect potential is equal to zero, the cyclic cluster of the perfect crystal is obtained. The cyclically embedded cluster model is relatively simple in implementation and has been used for point defects in ionic [698] and covalent [697] crystals. The drawback of the model is that it does not take into account the polarization of the crystal by the perturbative potential of the defect. The consideration above using a Wannier function for the supercell shows that the molecular-cluster model is more appropriate for the solids with the relatively narrow (1–3 eV) upper valence bands and sufficiently large energy gap. For ionic insulating crystals these conditions are fulfilled and the convergence of the results with increasing cluster size is rapid. The results of recent molecular-cluster calculations [432] confirmed these conclusions made about thirty years before [699]. As an example, we mention the localized orbitals approach used to introduce the embeddedcluster model of α-quartz [700]. The localized orbitals are constructed by applying various localization methods to canonical HF orbitals calculated for a succession of finite molecular clusters of increased size with appropriate boundary conditions. The calculated orbitals span the same occupied Fock space as the canonical HF solutions, but have the advantage of reflecting the true chemical nature of the bonding in the system. In strongly ionic systems, where coupling between the cluster and the background is mainly by classical Coulomb interactions, the long-range forces from the background can be accounted for by a Madelung term. A higher level of approximation applies a shell model for the environment, i.e. places a set of ions with rigid positive cores and polarizable, negatively charged shells around the cluster. The parameters of this shell model can be determined, e.g. , from self-consistent calculations on model systems. The charges in the embedding point charge model or in the shell model must be determined self-consistently with charges in the cluster [294]. Except for ionic solids, the interaction between the cluster and the background is quantum mechanical in nature, i.e. the electronic equation is to be solved. A rigorous mathematical basis for the separation of cluster and background is provided by Green-function (GF) techniques. There are essentially two possible ways: the perturbed-crystal and the perturbed-cluster approaches. In the former approach it is assumed that the defect introduces a perturbation relative to the perfect crystal, localized to the cluster. If the GF of the perfect crystal is known in any localized basis representation, and the matrix elements of the perturbation can be constructed, the GF of the perturbed crystal can be calculated [294]. The perturbed-crystal approach looks conceptually like the cleanest and most sophisticated solution as far as the description of the crystalline background is concerned. The problems arise more with the cluster. The perturbation should be constructed self-consistently and at the same

10.1 Symmetry and Models of Defective Crystals

425

level as the crystal potential. The perfect-crystal problem can easily be solved on a plane-wave basis but then the solutions must be transformed into Wannier functions in order to construct the perturbation. Alternatively, a localized basis set can be used for the perfect crystal in the first place. The perturbed-crystal model is most often used in metals where the screening effect of electrons is strong and the extent of atomic displacements is smaller. The perturbed-cluster approach [701, 702] is formulated in the LCAO approximation and is based on the following sequence of steps, [703]: a) subdivide the entire defect system into a molecular cluster (C), containing the defect, and an external region (D), the indented crystal; b) calculate the wavefunction for the molecular cluster in the field of the indented crystal; c) correct the cluster solution in order to allow for the propagation of the wavefunction into the indented crystal while generating the density matrix of the defect system. Steps “b” and “c” are repeated to self-consistency. The corrective terms in step “c” are evaluated by assuming that the density of states projected onto the indented crystal is the same as in the perfect host crystal (fundamental approximation). With respect to standard molecular-cluster techniques, this approach has some attractive features: explicit reference is made to the HF LCAO periodic solution for the unperturbed (or perfect) host crystal. In particular, the self-embedding-consistent condition is satisfied, that is, in the absence of defects, the electronic structure in the cluster region coincides with that of the perfect host crystal; there is no need to saturate dangling bonds; the geometric constraints and the Madelung field of the environment are automatically included. With respect to the supercell technique, this approach does not present the problem of interaction between defects in different supercells, allows a more flexible definition of the cluster subspace, and permits the study of charged defects. The perturbed-cluster approach is implemented in the computer code EMBED01 [703] and applied in the calculations of the point defects both in the bulk crystal, [704] and on the surface [705]. The difficulties of this approach are connected with the lattice-relaxation calculations. Concluding this section we compare the results obtained in the supercell and perturbed-cluster HF LCAO treatment for the cation vacancy in MgO [706]. The supercells with 16, 32 and 64 atoms have been considered. The perturbed-cluster was chosen so that the most important effects of electronic rearrangement and ionic relaxation occur within the cluster, i.e. the cluster included sufficiently large number of oxygen ions, which are the most polarizable species (perturbed-clusters of 7, 13 and 25 atoms were considered). For the largest supercell (64 atoms) and the largest perturbed-cluster (25 atoms) the cation-vacancy-formation energy was obtained (in eV) as 1.58 (1.48) and 1.29 (1.19), respectively. In brackets are given the formation energies after relaxation of first-neighbor oxygens; this relaxation is close in both models – 0.36 a.u and 0.37 a.u for the supercell and perturbed-cluster, respectively. This agreement can be called close. The majority of the point-defect calculations are now made with the use of the supercell model as it allows use of the computer codes developed for the perfectcrystals calculations. The examples of supercell LCAO calculations of some point defects in the metal oxides are given in the next sections.

426

10 Modeling and LCAO Calculations of Point Defects in Crystals

10.2 Point Defects in Binary Oxides 10.2.1 Oxygen Interstitials in Magnesium Oxide: Supercell LCAO Calculations Calculations on interstitial oxygen atoms Oi in MgO crystal are of interest because of the possibility of their formation as a primary product during radiation damage. Irradiation of alkali halides (MX) leads to the formation of primary pairs of Frenkel defects, namely F centers (electrons trapped at anion vacancies) and interstitial atoms X0 . The latter are chemically active and immediately form diatomic molecular-type defects X− 2 (H centers), each of which is centered on one anion lattice site. However, much less is known about interstitial defects in MgO crystals. The efficient creation of F centers under irradiation is known and means that complementary interstitial Oi atoms should also be formed. However, the volume change due to irradiation of MgO is surprisingly small, in contrast to that accompanying the formation of H centers in alkali halides. A diffusion-controlled process related to Oi defects was experimentally observed and characterized by an activation energy of 1.6 eV. This was ascribed to the destruction of some complexes. Therefore, the theoretical study of the stability and configuration of oxygen-atom interstitials in MgO is of importance in trying to understand radiation damage of this important ceramic material. We discuss here the results of all-electron HF and semiempirical valence-electron CNDO LCAO calculations of oxygen interstitials in MgO crystal [682]. The supercells of 8, 16 and 32 atoms (S8, S16, S32, see Sect. 10.1.2) were taken in HF calculations, in CNDO calculations the larger supercells were taken to study the convergence of the results obtained. The different configurations for the interstitial oxygen atom were considered, corresponding to an oxygen atom at the volume (v), face(f ) and edge (e) centers, respectively, see Fig. 10.2. The dumbbell-shaped configurations vd, f d, ed are formed when the interstitial oxygen atom Oi is moved toward the nearest-neighbor O2− lattice anion along , and directions, respectively. The lattice oxygen anion is simultaneously displaced from its site along the same direction, the center of the dumbbell formed is at the lattice site. To settle the question of an adequate size for the supercell, the calculations for v, f , and e configurations are made for supercells containing 9, 17, and 33 atoms. The defect energy levels in the bandgap are observed to change between the 9-atom and 33-atom supercells, although the influence of supercell size on the charge distribution is relatively small. In HF LCAO calculations the size of the supercell is limited by the computational facilities available. Therefore, the convergence of the properties of these defects was investigated also by means of the semiempirical complete neglect of differential overlap (CNDO) approximation, using a code, written by Tupitsyn [707] for the CNDO band calculations. In the CNDO approximations it was possible to use supercells containing 65, 129, and 257 atoms, obtained by enlarging all three smaller supercell translation vectors by a factor of two. It was found that both the charge distribution and the defect levels in the bandgap for the larger supercells were close to those obtained for the 33-atom supercell. HF and CNDO calculations were done to investigate convergence with respect to supercell size. All basis atoms, except those involved in a defect, occupy lattice sites. The CNDO results show that the defect-formation energy changes by only 0.3%

10.2 Point Defects in Binary Oxides

427

on increasing the supercell size from 33 to 257 atoms. The HF energies generally change by less than 0.03% on increasing the supercell from 17 to 33 atoms. This suggests that the variations observed in the CNDO energies may be due more to inherent approximations in the method than to defect interactions and that a 33atom supercell is definitely sufficient. If we were only interested in the energy of the unrelaxed crystal then an S8 supercell, containing eight primitive unit cells, would in fact be adequate. However, the number of shells of atoms around the defect that may be relaxed is dependent upon the size of the supercell, and the 33-atom supercell is the smallest that can be used to obtain quantitatively accurate results. In Table 10.3 is given the optimized distance between the two dumbbell atoms calculated by both the HF and CNDO methods. The labels S16, S64, and S128 are used for supercells containing 16, 64, and 128 primitive unit cells, respectively. q is the charge on each of the two oxygen atoms in the dumbbell configuration and d is the optimized distance between the two O atoms in the dumbbell. ∆Ed is the energy change on forming the dumbbell from an interstitial in the rigid lattice. Table 10.3. Results of HF and CNDO calculations for O atom interstitials in MgO (only the dumbbell oxygen atoms are relaxed), [682] Configuration ed

vd

fd

Supercell S16 (HF) S16 (CNDO) S64 (CNDO) S128 (CNDO) S16 (HF) S16 (CNDO) S64 (CNDO) S128 (CNDO) S16 (HF) S16 (CNDO) S64 (CNDO) S128 (CNDO)

d(˚ A) 1.310 1.280 1.280 1.282 1.355 1.394 1.392 1.393 1.372 1.369 1.366 1.369

q(e) –1.160 –0.944 –0.944 –0.944 –1.070 –0.918 –0.917 –0.917 –1.033 –0.929 –0.928 –0.928

−∆Ed — 32.6 32.6 32.6 — 7.9 7.9 7.8 — 3.2 3.2 3.3

The charge q on each of the two ions in the dumbbell is close to –1, negative charge on the dumbbell in excess of –2 is being made up by a slight deficit on the next-nearest ions. The optimized HF values for d are close to those found for a 17-atom supercell using the full-potential linear muffin-tin orbital (FPLMTO) method [708]. The optimized d values in the CNDO approximation are also close to those obtained using the HF and LMTO methods. Since the CNDO method is semiempirical these calculations were performed with all atoms except the added interstitial, or the two dumbbell atoms, fixed on their normal lattice sites. In the HF calculation, d was first optimized for a crystal with all except the defect atoms on perfect lattice sites. The charges on the two dumbbell atoms are again close to –1 and the values of d and q (the charge on each of the dumbbell atoms) in Table 10.3 are from these calculations. The optimum relaxed positions of the near-neighbor ions were then determined iteratively, and finally the value of ∆Ed was reoptimized.

428

10 Modeling and LCAO Calculations of Point Defects in Crystals

The values of d and q with the relaxed positions are in Table 10.4 together with the energy changes that accompany the formation of a dumbbell from the corresponding interstitial (ed from e, and so forth) and the further energy changes associated with relaxation of near neighbors. ∆Ed is the difference between the total energy of the unrelaxed crystal in the dumbbell configuration and that for the unrelaxed crystal with the added O atom in the interstitial site, ∆Erel is the further energy change (in eV) accompanying the relaxation of near neighbors. Table 10.4. Results of HF calculations of interstitial oxygen in MgO using S16 supercell, [682]. ˚) q(e) −∆Ed (eV) −∆Erel (eV) Relaxations δ (˚ Type of dumbell d (A A) ed 1.319 21.001 28.88 0.12 δMg1 = 0.241 δMg2 = 0.051 δMg2 = 0.051 δO = 0.0245 δO = 0.1030 vd 1.383 21.049 15.94 0.27 δMg = 0.077 δO = 0.1057 fd 1.324 21.010 7.15 2.59 δMg1 = 0.152 δMg2 = –0.010 δO = 0.0997

Subscripts 1,2 mean nearest- and next-nearest atoms (of that species) to the dumbbell, see Fig. 10.2c. For ed, δO is the displacement parallel to the axis of the dumbbell and δO⊥ the displacement perpendicular to the axis of the dumbbell. In each case all the atoms of a symmetry-related set that lies wholly within the supercell were allowed to relax. The importance of supercell size is shown, for example, by the calculations for vd where for S8, only the six nearest-neighbor Mg atoms may be relaxed because the nearest O atoms lie on the supercell boundary. This may be why comparable FPLMTO calculations [708] for S8 found the vd defect to be slightly more stable than f d, whereas in HF calculations the reverse is true (Table 10.4). The decrease in energy ∆Ed on forming a dumbbell in a perfect lattice from a v, f , or e-centered interstitial O atom (calculated as the difference between the HF total energies for the two configurations) is largest (28.9 eV) for the ed center and smallest for the f d center (7.1 eV). The former result is to be expected because of the greater overlap in the e configuration. The CNDO results for ∆Ed agree with the HF results only qualitatively, but they serve to confirm convergence with increasing size of supercell, which was the reason for doing the calculations. The further energy gain on the relaxation of near neighbors, −∆Erel , was found to be small compared to that on forming the dumbbells, which evidently provides a very effective mechanism for reducing charge overlap. The optimized displacements are given in Table 10.4 and these are seen not to exceed 0.1–0.2 ˚ A. With respect to the most stable f d relaxed dumbbell configuration the vd and ed configurations are less favorable by 1.31 and 1.86 eV, respectively. So O atoms formed in MgO during radiation damage will become trapped in face-

10.2 Point Defects in Binary Oxides

429

centered dumbbell configurations. The excitation of this configuration to the relaxed face-centered interstitial requires an energy of 2.12 eV, which would therefore be the activation energy for diffusion of f d. This energy may be compared with: 1.45 eV the activation energy for oxygen-atom diffusion calculated by the supercell FPLMTO approach [708]; the 1.6 eV for some diffusion-controlled process involving interstitial oxygen atom that has been observed experimentally in MgO. 10.2.2 Neutral and Charged Oxygen Vacancy in Al2 O3 Crystal: Supercell and Cyclic-cluster Calculations Aluminum oxide (α-Al2 O3 , corundum) has a large number of technological applications. Due to its hardness, its chemical and mechanical stability at high temperatures and its electronic properties as a widegap insulator it is used for the fabrication of abrasives, as a carrier for thin metal films in heterogeneous catalysis and in optical and electronic devices. The structural and electronic properties of α-Al2 O3 are altered by defects such as oxygen vacancies, which can be formed as a result of the bombardment of the oxide with high-energy particles. Neutral oxygen vacancies (F centers) and positively charged oxygen vacancies (F+ centers) in aluminum oxide have been investigated in a number of experimental and theoretical studies. Experimental and theoretical results agree that the two electrons of the F center are localized and remain in the vacancy vicinity indicating a singlet ground state. Despite numerous investigations, the defectformation energies of the F center, Ef (F), and the F+ center, Ef (F+ ), are rarely given in the literature. To our knowledge, no experimental data are available up to now. In [709] supercell calculations based on the orthogonalized linear combination of atomic orbitals (OLCAO) method within the local density approximation (LDA) were performed. In this case, the oxygen vacancy was modeled by removing one oxygen atom from the cell. They obtained a defect-formation energy of Ef (F) = 38.36 eV for the neutral oxygen vacancy without relaxation of the geometry. When the four nearest-neighbor aluminum and 12 next-nearest-neighbor oxygen atoms around the vacancy (see Fig. 2.19) were allowed to relax the defect-formation energy decreased to Ef (F) = 5.83 eV. This corresponds to a relaxation energy of Erel = 32.53 eV. The distance of the neighboring aluminum atoms to the vacancy increased by about 16% and the distance of the oxygen neighbors by about 8% with respect to the unrelaxed structure. Similar values were obtained for the F+ center. The defect-formation energy for the F center was calculated with respect to an isolated neutral O atom, see (10.1), using the difference of the total energy of the supercell with and without vacancy, and adding the energy of the free oxygen atom EO . In [710] a 65-atom molecular cluster is used that was treated semiempirically at the INDO level and embedded in the electrostatic field generated by multipoles. To model the F and F+ centers in corundum additional 2s and 2p Slater-type atomic orbitals were placed in the vacancy after removing one O atom. The relaxation of the four aluminum atoms nearest to the vacancy resulted in an outward displacement by 2–3% and 5–6% for the F and F+ center, respectively. From the 12 next-nearest oxygen atoms only two were allowed to relax. In contrast to the results of [709] the two oxygen atoms moved toward the vacancy by about –2.2% and –4.6% for the F and F+ center, respectively. Defect-formation energies were not calculated.

430

10 Modeling and LCAO Calculations of Point Defects in Crystals

The neutral oxygen vacancy was investigated in [711] by supercell-DFT calculations within the generalized gradient approximation (GGA) using a plane-wave basis and ultrasoft Vanderbilt pseudopotentials. The calculated defect-formation energy is Ef (F) = 7.13 eV and Ef (F) = 7.08 eV for the F center without and with the relaxation of the nearest aluminum and next-nearest oxygen atoms, at the oxygen-rich limit. As a reference for the calculation of the defect-formation energy EO = 0.5EO2 was taken instead of a free oxygen atom energy EO . The aluminum atoms show an inward relaxation of –1.5%, the positions of the oxygen atoms are almost unchanged (–0.1%). The intrinsic defects in α-Al2 O3 were also studied in [712] by the supercell DFT PW method (the supercell contained up to 120 atoms). The relaxation of the four nearest aluminum atoms, 12 next-nearest oxygen atoms and two next-next-nearest aluminum atoms around the neutral and positively charged oxygen vacancy was taken into account. The results given in [712] show an average inward relaxation of the nearest Al for the neutral oxygen vacancy of about –1.5% and a slight inward relaxation of the next-nearest O atoms by –0.4%. For the single positively charged oxygen vacancy they find an outward relaxation of the nearest Al atoms of 4.6%. The oxygen atoms relax by –1.4% toward the vacancy. The defect-formation energy of the neutral oxygen vacancy Ef (F)= 13 eV was calculated at the oxygen-rich limit. It is seen that the results of the different theoretical simulations of oxygen vacancies in corundum are contradictory. An attempt to resolve this contradiction was made in [713] where the energies of the formation of an F center and an F+ center were calculated and relaxation effects were investigated with a combination of HF, DFT and semiempirical methods in the framework of supercell and cyclic-cluster models. All supercell LCAO calculations were made using the CRYSTAL code [23], the details of the basis and computational parameters choice can be found in [713]. The semiempirical cyclic-cluster calculations were made using the MSINDO code developed in the Hannover theoretical chemistry research group [256], see Chap. 6. The cyclic cluster was embedded in an infinite field of point charges using the Ewald summation technique [714]. The charges for the embedding can either be calculated self-consistently from the atoms of the cyclic cluster using a Lowdin population analysis at each SCF cycle or can be kept fixed at the values of the perfect crystal. The scheme of the SCM model realization, discussed in Sect. 10.1.3, requires in stage 1 the calculations of the perfect crystal. The perfect corundum crystal has a 6 rhombohedral structure with the space group R¯ 3c(D3d , see Chap. 2). The oxygen atoms form a hexagonal close-packed structure, the aluminum atoms occupy 2/3 of the octahedral vacancies so that all Al atoms have the same environment. Every O atom has two neighboring Al atoms at a distance of r1 = 1.86 ˚ A and two others at a distance of r2 = 1.97 ˚ A. The primitive rhombohedral unit cell consists of two Al2 O3 formula units with experimental lattice parameters a = 5.128 ˚ A and α = 55.333◦ . Using the transformation of basic rhombohedral lattice translation vectors with the matrix ⎛ ⎞ 2n1 n1 0 l = ⎝−n1 n1 0 ⎠ , (10.12) L = 3n21 n2 0 2n1 n2 one obtains the hexagonal setting of the corundum structure structure. Its unit cell (n1 = n2 = 1) consists of L=3 primitive unit cells. The lattice parameters in this

10.2 Point Defects in Binary Oxides

431

˚ and c = 13.003 ˚ hexagonal setting are a = 4.763 A A. Furthermore, corundum has two internal structure parameters uAl = 0.352 and uO = 0.306, which define the Al and O positions, respectively (see Sect. 2.3.5). The experimental heat of atomization is ∆a H0 = 31.60 eV/Al2 O3 . This has been obtained by the experimental heat of formation of the solid (∆f H0 (Al2 O3 ) = −17.22 eV) and the heats of formation of the corresponding atoms in the gas phase (∆f H0 (Al) = 3.35 eV, ∆f H0 (O) = 2.56 eV). As was noted in Sect. 10.1.3, the first stage of supercell-cyclic-cluster calculations of the defective crystal consists of the band-structure calculations of the perfect crystal to choose the supercell for its modeling. Table 10.5 shows the results for the HF and DFT LCAO band calculations of the perfect Al2 O3 . Table 10.5. HF and DFT cohesive energies E HF and E DFT (eV/Al2 O3 ) obtained from band calculations using different sets (s1 s2 s3 ) of k-points, [713]* Unit cell (s1 s2 s3 ) rhombohedral (222) (333) hexagonal (111) (221) (331) (662)

L 8 27 3 12 27 216

Nefficient Al16 O24 Al108 O162 Al12 O18 Al48 O72 Al108 O162 Al432 O1296

E HF 21.47 21.50 — 21.49 21.50 21.50

E DF T 29.70 29.72 29.84 29.70 29.71 29.72

*E exp =31.60 eV

The geometrical parameters were fixed to the experimental values. The cohesive energy per formula unit was calculated as the difference between the total energy per Al2 O3 unit in the crystal and the sum of the energies of the corresponding free atoms. The calculations were made using Monkhorst–Pack sets (s1 , s2 , s3 ) of k points, which correspond to supercells of L-primitive unit cells consisting of Nef f icient atoms. Ecoh calculated corresponds to the experimental heat of atomization ∆a H0 except for the zero-point energy that is neglected in the calculation of Ecoh . The energies of the free Al and O atoms were obtained by increasing the basis sets successively with diffuse sp-functions until the energies of the free atoms were converged, see Chap. 8. The HF cohesive energy of 21.50 eV/Al2 O3 is too low by 10.10 eV/Al2 O3 compared with the experimental value of 31.60 eV/Al2 O3 . This discrepancy is mainly due to the missing correlation and the incompleteness of the basis set [715]. The DFT results, using the PWGGA-PWGGA exchange-correlation functional (29.72 eV/Al2 O3 ), are closer to the experiment. But the cohesive energy is still underestimated by about 1.88 eV/Al2 O3 . The bandgap Eg = 6.28 eV from DFT calculation is about 0.4 eV larger than the value obtained in [712] but still too small compared with the experimental range of the bandgap between 8.5 and 9.9 eV. The bandgap of 17.51 eV calculated at the HF level is much too high in line with experience. The results of the cyclic-cluster MSINDO calculations are shown in Table 10.6. Since the CCM does not involve a summation over the reciprocal space the size of the cyclic cluster was increased in direct space to obtain convergence for the cohesive energy. Each cluster was embedded in an infinite Madelung field of

432

10 Modeling and LCAO Calculations of Point Defects in Crystals

Table 10.6. Cohesive energies E MSINDO (eV/Al2 O3 ) for cyclic-cluster MSINDO calculations using different cyclic clusters, [713]. Cluster Al12 O18 Al48 O72 Al96 O144 Al108 O162 Al192 O288

L 3 12 24 27 48

n1 1 2 2 3 4

n2 E MSINDO 1 35.45 1 31.17 2 31.17 1 31.09 1 31.09

point charges. Again, the geometry was fixed to the experimental values to enable the comparison with the results of the supercell calculations. The MSINDOoptimized lattice parameters (a = 4.779 ˚ A, c= 13.074 ˚ A), internal structure parameters (uAl = 0.354, uO = 0.301) and the cohesive energy (Ecoh = 31.16 eV/Al2 O3 ) [714] of the perfect α-Al2 O3 are in very good agreement with the experimental data. A bandgap of Eg = 10.9 eV was obtained by a 25 × 21 configuration interaction (CI) calculation for the defect-free Al192 O288 cluster. This value is at least 1 eV above the experimentally observed range of the bandgap of the perfect crystal but there are no forbidden transitions, which is an indication of a direct bandgap, in agreement with the generally accepted opinion. The valence-band maximum (VBM) consists of O 2p orbitals, while the conduction band minimum (CBM) consists mainly of Al 3s orbitals in agreement with other theoretical [712] and experimental results. The cohesive energies for the experimental geometry of α-Al2 O3 given in Table 10.6 show a fast convergence with increasing cluster size. Already the energy value of the Al48 O72 cluster that corresponds to L = 12 primitive unit cells is, with 31.17 eV/Al2 O3 , close to the calculated limit of 31.09 eV/Al2 O3 . Therefore, the experimental value of 31.60 eV/Al2 O3 is reproduced with a deviation of about 0.50 eV/Al2 O3 . In stage 2 (the supercell calculation of a defective crystal, see Sect. 10.1.3), for the simulation of the F center in α-Al2 O3 a supercell was created by using the transformation matrix (10.12) with n1 = 2 and n2 = 1 (L=12). One oxygen atom was removed from the supercell and the defect-formation energy for the F center was calculated for different k-point grids (s1 s2 s3 ) keeping the geometry fixed to the experimental values. For the calculation of the defect-formation energy EO = 0.5EO2 was used. Table 10.7 shows the results using the HF and the DFT (PWGGA-PWGGA) approach. Table 10.7. HF and DFT defect-formation energies E HF (F) and E DFT (F) (eV) for the neutral oxygen vacancy in Al2 O3 obtained from supercell calculations using different sets (s1 , s2 , s3 ) of k-points, [713]. (s1 , s2 , s3 ) E HF (F) (1 1 1) 16.55 16.38 (2 2 2) 16.38 (3 3 3)

E DFT (F) 13.08 12.92 12.24 PW-DFT GGA [712]

10.2 Point Defects in Binary Oxides

433

The defect-formation energy shows fast convergence with the increase of the number of sampling k points. Already the (2 × 2 × 2) grid gives the converged HF energy of EfHF (F ) = 16.38 eV. For the DFT calculations the same set of k points was used to yield a defect-formation energy of EfDF T (F ) = 12.92 eV, which is about 3.46 eV lower than the HF result. In stage 3 relaxation effects were included in the simulation of the F and the F+ centers in α-Al2 O3 using the MSINDO cyclic-cluster calculations (Table 10.8). Table 10.8. Cyclic-cluster MSINDO defect-formation energies E MSINDO (F) and A) of nearest-neighbor (NN) and next-nearest E MSINDO (F+ ) (eV), distances r1 and r2 (˚ neighbor (NNN) atoms from the defect and changes of the distances ∆r(%) for the unrelaxed and relaxed F and F+ center in Al2 O3 using the Al192 O288 cyclic cluster, [713] Unrelaxed Relaxed (NN+NNN) F center E MSINDO (F) = 12.32, E MSINDO (F) = 11.81, r1 = 1.86, r2 = 1.97 r1 = 1.872 (∆r = 0.5), r2 = 2.053 (∆r = 4.0) F+ center E MSINDO (F+ ) = 12.22, E MSINDO (F+ ) = 10.33, r1 = 1.86, r2 = 1.97 r1 = 1.971 (∆r = 6.0), r2 = 2.089 (∆r = 6.0)

The Al192 O288 cyclic cluster (n1 = 4, n2 = 1, L=48) was chosen for the simulations. One oxygen atom was removed from the cyclic cluster to create the F center, keeping the system neutral. To model the F+ center the charge of the system was set to +1 after removing one oxygen atom. In both cases the cyclic cluster was embedded in the Madelung field of the perfect crystal. The charges for this embedding were the L¨ owdin charges calculated from the simulation of the corresponding perfect cyclic cluster. In contrast to the standard supercell model of a periodic point defect, no artificial neutralizing background and additional charge corrections are needed in the cyclic-cluster model as the point defect is not periodically repeated. The four nearestneighbor (NN) aluminum atoms and the 16 next-nearest-neighbor (NNN) oxygen atoms close to the vacancy were allowed to relax using a quasi-Newton method until the residual forces had converged to less than 0.02 eV/˚ A. The rest of the cyclic cluster was fixed in the experimental geometry. The defect-formation energy of the F+ center was calculated using as the reference a single oxygen atom energy EO′ = 0.5EO2 as in the case of the neutral oxygen vacancy. Additionally, one electron is removed from the cluster to create a positive charge and the chemical potential of the electron µe is assumed to be zero, different from the models of the charged defects where the electron is assumed to remain in the lattice. The CCM value for the defect-formation energy of the unrelaxed F center EfM SIN DO (F ) = 12.32 eV is close to the DFT supercell value of EfDF T (F ) = 12.92 eV and the 13 eV obtained in [712], despite substantial differences in the defect-level positions above the VBM. The latter are 8.1 eV for MSINDO, 4.9 eV for DFT supercell calculation and 2.3 eV as obtained in [712]. The SCM calculation using the HF method gives a larger defect-formation energy (EfHF (F ) = 16.38 eV). The defect-formation energy of 7.13 eV calculated

434

10 Modeling and LCAO Calculations of Point Defects in Crystals

in [711] is considerably lower than the values obtained in [713]. The defect-formation energy of Ef (F ) = 38.36 eV calculated in [709] was obtained using the total energy of the oxygen atom. If one usees the same reference [709] and not 1/2EO2 one finds a defect-formation energy of 15.06 eV for the MSINDO cyclic-cluster simulation of the unrelaxed vacancy. An absorption band of about 6 eV has been assigned experimentally to the F center, indicating a location of a doubly occupied defect level roughly 3 eV above the VBM. The corresponding excitation energies are 1.8 eV and 8.8 eV for DFT and HF calculations [713], respectively. The defect level obtained using the MSINDO-CCM method consists mainly of Al 3s orbitals of the aluminum atoms next to the vacancy. Using a 40 × 30 CI the first allowed excitation was found to occur at 3.1 eV for the relaxed structure. Therefore, the excitation energy is underestimated by about 3.0 eV. In comparison the excitation energy in [712] is 3.52 eV which is also too small. Concerning the relaxation, the CCM simulations of the F center show that the NN Al atoms increase their distance from the vacancy by 1% to 4% which agrees well with the corresponding data of 2% to 6% of [710]. The value from [709] is larger (16%) but the NN Al atoms also show a movement away from the vacancy. This is reasonable, since the NN Al atoms are positively charged and should therefore repel each other. Under these circumstances the inward relaxation to the vacancy (1.5%) of the aluminum neighbors found in [711, 712] is difficult to understand. Their choice of pseudopotentials and of basis set, restriction only by Γ point in BZ might be the reason for the discrepancy. Table 10.7 shows that a Monkhorst–Pack net of at least (222) must be used for the defective supercell to reach convergence with respect to the energy. Using only the Γ point might also influence the relaxation. Considering the NNN O atoms, an average relaxation of –0.4% toward the vacancy and the total relaxation energy Erel =0.51 eV was found in the LCAO calculations [713] of the F center. This agrees well with the values –0.1% and –0.4% of [711, 712] indicating that the positions of the oxygen atoms are almost unchanged. An inward relaxation was also found in [710]. In contrast to these results, a large outward relaxation of 8% and Erel =32.53 eV were found in [709]. The value of 32.53 eV for the relaxation energy appears to be much too high, because this value is larger than the experimental heat of formation for the α-Al2 O3 (31.60 eV). A singly occupied defect level occurs in the bandgap in the case of the F+ center. The results of the CCM calculations for the F+ center (Table 10.8) indicate a larger relaxation of the NN Al atoms (6.0%) and of the NNN oxygen atoms (-1.2%) compared to the values obtained for the neutral oxygen vacancy. This is reasonable, since the aluminum atoms repel each other more strongly due to the missing electron in the vacancy. In consequence, the relaxation energy (Erel = 1.90 eV) is also larger than the corresponding value for the F center. This trend is confirmed by results found in DFT PW calculations [712]: an outward relaxation of 4.6% for the Al neighbors and an inward relaxation of –1.4% of the oxygen atoms close to the vacancy, which agrees well with the MSINDO CCM results. The movements found in semiempirical LCAO calculations [710] are slightly larger (5–6% for the Al atoms, –4.6% for the oxygen atoms) but they also confirm the tendency. The defect-formation energy of the F+ center is smaller than that of the F center in both the relaxed and the unrelaxed structures using µe = 0 for the chemical potential of the electrons. This agrees qualitatively with the results of [712] when compared to

10.2 Point Defects in Binary Oxides

435

their values at k = 0. It was noted that no experimental data for the defect-formation energy are available in the literature for the F and F+ center in α-Al2 O3 . The detailed consideration of the results of application of different models and calculation schemes to F and F+ centers in corundum demonstrate that LCAO methods reproduce well the results of PW calculations for the neutral defect. Furthermore, the LCAO methods are more appropriate for the charged-defect modeling as the artificial defect-periodicity is escaped in the LCAO cyclic-cluster approach. 10.2.3 Supercell Modeling of Metal-doped Rutile TiO2 Titanium dioxide (TiO2 ) is a wide-bandgap material useful in many practical applications (electrochemistry, sun lotions, nanostructured electrodes). The electronic stucture of TiO2 can be strongly influenced by 3d transition-metal dopants that introduce local electronic levels into the bulk energy bandgap and thus shift the absorption edge to the visible region. The effects of metal doping on the properties of TiO2 have been a frequent topic of experimental investigation. In particular, according to a systematic study on the photoreactivity and absorption spectra of TiO2 doped with 21 different metals [716] the energy level and d-electron configuration of the dopants were found to govern the photoelectrochemical process in TiO2 . The resonance photoemission study [717] was applied to investigate the nature of bandgap states in V-doped TiO2 in rutile structure. The computer simulation has been employed to clarify in detail impurity-doping effects. A molecular-cluster approach was extensively adopted, see references in [718]. These cluster calculations have never led to unifying conclusions regarding the effects of doping on the electronic states due to the influence of dangling bonds. The supercell approach demonstrated its capacity to deal with metal-doped TiO2 defective crystals in DFT FPLAPW supercell electronic-structure calculations [718, 719]. It was found that when TiO2 is doped with V, Cr, Mn, Fe or Co, an electronoccupied localized level in the bandgap occurs and the electrons are localized around each dopant. As the atomic number of the dopant increases the localized level shifts to the lower energy. The energy of the localized level due to Co is sufficiently low to lie at the top of the valence band, while the other metals produce midgap states. In contrast, the electrons from the Ni dopant are somewhat delocalized, thus significantly contributing to the formation of the valence band with the O 2p and Ti 3d electrons. These conclusions were made in [718] on the basis of the DFT FPLAPW calculations on a relatively small supercell consisting of four primitive unit cells stacked along the b- and c-axis of the simple tetragonal lattice. The experimental values of the lattice constants a=b=4.594 ˚ A, c=2.959 ˚ A were taken, so that the translation vectors lengths a, b, c of the orthorhombic supercell equal 4.594 ˚ A, 9.188 ˚ A and 5.918 ˚ A, respectively. Such a choice of supercell is not optimal as the defect–defect distance Rd−d is not the same along the three supercell translation vectors and the defect– defect interaction corresponds in fact to the smallest distance Rd−d = 4.594 ˚ A (the length of the primitive tetragonal unit cell translation in the perfect rutile crystal). As in the FPLAPW method the further increasing of the supercell is sufficiently difficult that the dependence of the results on the supercell size was not studied in [718]. Such a study was made in semiempirical cyclic-cluster calculations of Li and

436

10 Modeling and LCAO Calculations of Point Defects in Crystals

Cl, Br impurities in TiO2 [720, 721] without preliminary symmetry analysis of the cyclic clusters chosen. Such an analysis was made in [683] and allowed the convergence of the supercell UHF LCAO calculations of V-doped rutile with the supercell size to be investigated. This first nonempirical supercell LCAO calculation of the defective rutile crystal is discussed here in more detail. The impurity vanadium atom substitutes for a titanium atom introducing an unpaired electron in the unit cell. The symmetry of the supercell model is described by 1 19 23 25 any of four orthorhombic space groups D2h , D2h , D2h , D2h . Analyzing the period of the defect for the same supercell size (given L-value) in these groups it was found 25 that for rutile structure the best choice would be D2h corresponding to the symmetric transformation of the simple tetragonal lattice translation vectors with matrix (n1 , n2 , n3 - integers, n1 = n2 ): ⎞ ⎛ −n1 −n2 n3

(10.13) l = ⎝ n1 n2 n3 ⎠ , L = 2 n21 − n22 n3 n2 n1 −n3

25 The space group D2h corresponds to the body-centered orthorhombic lattice of supercells with the translation vectors of equal length in all three translation directions. This means that the point-defect period is also the same in these directions (equidistant configuration of defects). This choice of defective crystal space group ensures the largest defect period for a chosen supercell size (fixed value of L). The UHF LCAO calculations of V-doped rutile were made using the CRYSTAL code [23] and Durand–Barthelat pseudopotentials [484]. The atomic basis functions of Ti and O atoms were taken from [323] that were fitted to reproduce the band structure and bonding properties of perfect rutile crystal. The vanadium atom functions were found by fitting these properties of VO2 crystal in the rutile modification. The accuracy of the calculation was ensured by the choice of the computational parameters of the CRYSTAL code ensuring a good accuracy of the bielectronic series, the convergence thresholds of the eigenvalues and total energy and k-point sampling in BZ. Table 10.9 shows the results obtained for the supercells of increasing size. The Monkhorst–Pack shrinking factor was taken to be 6 for supercells with L=2, 4, 6 and 4 for supercells with L=10, 14. Table 10.9 gives the integers n1 , n2 , n3 defined according to (10.13) the supercell of the defective crystal consisting of L primitive unit cells and corresponding doping per cent, the number of atoms NA and atomic basis functions NB in the supercell, vanadium–vanadium distance Rd−d (defect period) in the supercell model. The convergence of the absolute value of the one-electron energy Ed occupied by the unpaired electron is seen. It appears that already the supercell for L =6 is enough to reproduce the vanadium atom charge QV , covalence CV (the sum of the bond orders of the impurity atom with all the crystal atoms) . Using the calculated QV and CV the total valence Vtot = andspin-density NVα−β  4 0.5 CV + 4Q2V + CV2 is 3.88, i.e. the impurity atom is in oxidation state IV, and the calculated spin density corresponds to the fifth vanadium electron not taking part in the chemical bonding. This result is in accordance with the experimentally found [717] ESR signal for V-doped rutile. The Fermi energy EF in the perfect rutile TiO2 (EF =–0.3029 a.u.) was calculated using the same pseudopotential and basis functions of titanium and oxygen atoms

10.2 Point Defects in Binary Oxides

437

Table 10.9. The convergence of the results of the unrestricted Hartree–Fock LCAO cal25 = Immm; L = culations [683] of the V-doped rutile (defective-crystal space group D2h 2(n21 − n22 )n3 )∗ (n1 , n2 , n3 ) L doping (%) NA NB Rd−d (˚ A) Ed (a.u.) QV CV NVα−β



(1,0,1) 2 0.25 12 120 5.45 –0.2955 2.761 1.921 1.115

(1,0,2) (2,1,1) (3,2,1) 4 6 10 0.125 0.083 0.050 24 36 60 240 360 600 7.53 10.62 16.69 –0.2991 –0.3004 –0.3012 2.760 2.759 2.759 1.924 1.927 1.927 1.114 1.099 1.099 ⎛ ⎞ −n1 −n2 n3 The supercell transformation matrix l = ⎝ n1 n2 n3 ⎠ n2 n1 −n3

(4,3,1) 14 0.036 84 840 22.97 –0.3016 2.759 1.927 1.099

that were used for the defective-crystal calculation. Thus, the V-atom impurity level (occupied by an electron) is relatively close to the perfect-crystal valence-band edge (∆E=–0.3016 + 0.3029 = 0.0013 a.u. or 0.04 eV). Experimental data [717] predict larger values of ∆E (0.03 a.u. or 0.81 eV). The difference may be explained both by the necessity to take into account the atomic relaxation around the impurity atom and experimental ambiguity in the assignment of the gap states to electrons localized on the V dopant. Bearing in mind the energy gap of 3.0 eV for the perfect crystal and midgap position of the localized level in FPLAPW calculations [718] for V-doped rutile, we conclude that both LCAO (0.04 eV) and FPLAPW (1.5 eV) results for the defect-level position in the bandgap differ from the experimental estimation (0.81 eV). Table 10.9 shows that the increase of the supercell size moves the defect energy level closer to the valence-band edge. Therefore, DFT FPLAPW-correlated calculations with the larger supercells would make the agreement with the experimental data better. When using HF LCAO approach for the calculations it is important to estimate the possible influence of the electron correlation on the obtained results. We have seen that the highest-occupied level position moves to higher energies when the correlation is taken into account and this movement may appear different for the perfect and defective crystal, so that the defect-level position in the bandgap also changes. This requires further study. Nevertheless, the calculation [683] demonstrates: (1) the efficiency of the more detailed symmetry analysis for the supercell choice when the periodic defect calculations are made in the complicated crystalline structures with the symmetry of a nonsymmorphic space group and noncubic lattice; (2) the reality of the supercell model for the nonempirical LCAO calculations of the point defects in such a complicated crystalline structure as a rutile structure; 3) higher efficiency of LCAO basis compared with LAPW basis in the supercecell calculations of defective crystals. Moreover, the supercell model allows the dependence of the electronic properties of doped crys-

438

10 Modeling and LCAO Calculations of Point Defects in Crystals

tals on the doping level to be investigated. In the next section we consider supercell calculations of defective crystals with perovskite structure.

10.3 Point Defects in Perovskites 10.3.1 Oxygen Vacancy in SrTiO3 Ternary ABO3 perovskite materials have numerous technological applications as these materials display a wide range of useful physical and chemical properties. They are important as catalysts, as ceramics, ferroelectrics, superconductors, as materials for fuel cells, fusion reactors, and optical and piezoelectric devices. The properties of perovskite materials are heavily dominated by their oxygen content, as well as by donor- and acceptor-type impurities. An essential contribution to the knowledge of the structural and electronic properties of point defects in these materials comes from theoretical approaches. The results of large-scale computer semiempirical and first-principles modeling of point defects, polarons and perovskite solid solutions can be found in [722], focusing mostly on KNbO3 and KTaO3 . First-principles calculations of formation energies of point defects were made on BaTiO3 [723, 724] and NaNbO3 [725] crystals. Among the various fundamentally and technologically important oxides, SrTiO3 is a simple structural prototype for many perovskites, in which the detailed investigation of native and dopant defects can lay the theoretical groundwork that can be applied to structurally and chemically more complex perovskite materials [726]. The Green-function method appeared to be very useful for displaying the chemical trends in defect energy levels [727, 728]. However, the calculation of other defectivecrystal properties (defect-formation energy, lattice relaxation, local-states localization) requires approaches based on molecular cluster or supercell models. Only recently have these models been used in the first-principles calculations to study point defects in SrTiO3 . The supercell calculations are made mostly by the DFT PW method [726, 729]. The comparative PW (supercell) and LCAO (cluster and supercell) calculations are known for the oxygen vacancy in SrTiO3 crystal [730–732]. Oxygen vacancies in SrTiO3 act as effective donors and are important defects in SrTiO3 . Theoretical simulation of defective SrTiO3 is very important since modern scanning transmission electron microscopy (STEM) and reflection high-energy electron diffraction (RHEED) combined with atomic-scale electron-energy-loss spectroscopy (EELS) are able to detect the presence of even single impurities and vacancies in SrTiO3 . A deliberate deviation of oxygen content from the ideal stoichiometry of perovskites, is relevant for their numerous high-tech applications as sensors, fuel cells, microelectronic devices. At low oxygen partial pressure, the electrical conductivity of SrTiO3 perovskite is controlled by both the concentration and mobility of oxygen vacancies, which act as effective donors; therefore, this material becomes ntype conductive. Increasing the partial pressure reduces the carrier concentration, and at high pressures the conductivity goes through a minimum: the material becomes p-type [733, 734]. Consequent thermal reduction of oxygen in single-crystalline strontium titanate results in the insulator-to-metal transition, up to a possible superconducting state, accompanied by intensive formation of vacancies and their high

10.3 Point Defects in Perovskites

439

density within the skin region [735]. Oxygen vacancies play a noticeable role in the structural transformations in bulk SrTiO3 , which possesses two relevant structures: the tetragonal antiferrodistortive (AFD) phase, and the cubic phase [726]. The latter (Fig. 10.3a) is stable at 105 K, whereas AFD (slightly distorted cubic phase) is stable at lower temperatures.

Fig. 10.3. Three types of equidistant crystalline cells with a centered O vacancy for the cubic phase of SrTiO3 perovskite: (a) simple cubic (sc); (b) face-centered cubic (fcc); (c) body-centered cubic (bcc). Sticks between the oxygen and titanium ions indicate the partly covalent bonds between them. To construct the difference electron-density plots, each cell is sectioned along the Ti-O-Ti axis by the plane PP

When simulating a single point defect, the main problem is to understand changes induced by it in the atomic and electronic structure of a host crystal. A perfect SrTiO3 crystal has a mixed ionic-covalent nature of the chemical bonding, which is not in complete conformity with the formal charges on Sr2+ , Ti4+ , and O2− ions, see Chap. 9. The formalism of Wannier functions applied for the determination of effective charges and bond populations in several perovskite crystals [736] calculated previously using the density-functional theory (DFT) method [606] gives the atomic charge of +2.55 on titanium and –1.55 on oxygen, whereas the Ti–O bond order is 0.35; only the charge on Sr (+1.95) is close to the nominal ionic value +2, confirming that strontium is ionically bonded in SrTiO3 . Partly covalent chemical bonding makes the simulations of the structural defects in strontium titanate rather complicated, even in a cubic phase. The simplest native defect may be described in terms of either a neutral oxygen vacancy (single O atom removed from the lattice site) or neutral F center (the oxygen ion O2− vacancy trapped 2 electrons remaining in a host crystal). Theoretical studies mainly predict equal contributions of the 3d orbitals of the two nearest titanium ions (Fig. 10.3) into the wavefunction of the F center [729, 730, 734]. According to DFT calculations on a cubic phase of SrTiO3 perovskite [730], the Mulliken electron charge of 1.1–1.3 is localized in the neutral O vacancy (depending on the supercell size), and 0.6–0.8 are equally divided by the two nearest Ti ions if we consider the F center. This result does not confirm the formal conclusions that the F center is supposed to have released both electrons, whereas the nearest titanium

440

10 Modeling and LCAO Calculations of Point Defects in Crystals

ions change their valence from Ti4+ to Ti3+ . The position of the F center level in the optical bandgap of SrTiO3 is also not completely clear: it is an open question as to whether it lies well below the conduction-band bottom or close to it. The latter is supported by the indirect experimental study on the conductivity of SrTiO3 ceramics, suggesting that the F center is a rather shallow defect [737]. Supercell ab-initio calculations on the SrTiO3 give the values of the formation energy for O vacancy within the range of 6.5–8.5 eV [726, 729, 730, 734], whereas in cluster models [738], removal of an O atom from the lattice has a higher energy cost (> 9 eV). However, this value cannot be directly measured experimentally. Conductivity in SrTiO3 at low partial oxygen pressures depends on the mobility of O vacancies [737]. Experiments performed at high temperatures suggest an energy barrier of 0.86 eV for the F center diffusion in bulk, whereas semiempirical pair-potential calculations on migration on the empty O vacancy result in the barrier of 0.76 eV [739]. In [732] the results of both LCAO (made with the CRYSTAL code [23]) and PW (made with the VASP code [740]) DFT calculations on the F center in a cubic phase of SrTiO3 perovskite are analyzed, combining the advantages of LCAO and planewave formalisms. The lattice structural relaxation around an oxygen vacancy was optimized for supercells of different shapes and sizes. This is important as DFT PW calculations [726] show the strong dependence of the results on the supercell size (it was concluded that at least a 4 × 4 × 4 supercell of 320 atoms is needed to describe the structural parameters of an oxygen vacancy accurately). In [732] the supercells were obtained by a consequent equidistant extension of crystalline lattice vectors (Fig. 10.3) increasing the supercell size from 80- up to 320-atom cells, in order to eliminate the interaction of periodically repeated point defects and to reach the limit of a single F defect. These supercells are described by transformation matrices ⎛ ⎞ ⎛ ⎞ ⎛ ⎞ n 0 0 0 n n −n n n ⎝0 n 0 ⎠ , ⎝n 0 n ⎠ , ⎝ n −n n ⎠ (10.14) 0 0 n n n 0 n n −n where n is varied between 2 and 4. The corresponding equidistant supercells form sc, f cc and bcc lattices (cases a), b) and c) in Fig. 10.3, respectively). The ratio of volumes for the supercells extended from the primitive unit cell using matrices (10.14) with the same n is (10.15) Vbcc = 2Vf cc = 4Vsc

Supercells with extensions 3×3×3 (135 atoms) and 4×4×4 (320 atoms) √ form√a simple √ cubic lattice (Fig. √ 10.3a).√ In turn, √supercells with the fcc extensions 2 2 × 2 2◦× 2 2 (80 atoms) and 3 2 × 3 2 × 3 2 (270 atoms) are rhombohedral with a 60 angle between the lattice vectors, see 10.3b. Lastly, for a 160-atom rhombohedral bcc √ √ Fig. √ supercell (extension 2 3 × 2 3 × 2 3), the angle is 109.47◦ . For all three types of equidistant cells shown in Fig. 10.3, their shapes correlate with the orientation of the –Ti–O–Ti– axis, it may be: (i) the rotation axis joining the centers of opposite faces (Fig. 10.3a), (ii) the diagonal joining the opposite apices of the rhombohedron (Fig. 10.3b), and (iii) the axis joining the centers of opposite rhombohedron edges (Fig. 10.3c). The computational details (the optimization of LCAO basis and choice of cutoff energy in PW calculations, k-meshes used for BZ integration, choice of pseudopotentials) can be found in [732]. The advantage of PW calculations is that the complete

10.3 Point Defects in Perovskites

441

optimization of lattice relaxation upon vacancy creation, even for large supercells, can be performed much faster than in LCAO calculations. Geometry optimizations in PW calculations have been carried out with an accuracy of 10−3 eV in the total energy. The electronic structure of defective SrTiO3 perovskite calculated with both the CRYSTAL and VASP codes has been studied for the diamagnetic closed electronic shell (singlet) state, since no lower state was found employing spin-polarized calculations [730]. The basic properties of a perfect cubic SrTiO3 crystal (lattice constant, bulk modulus, elastic constants) were obtained in reasonable agreement with experiment in LCAO calculations. The best agreement with experimental results for the energy gap was obtained for the hybrid HF-DFT technique (B3PW), see Chap. 9. Further improvement of the calculated optical gap was achieved by adding the d polarization orbital into the oxygen basis set: at the Γ point of BZ the calculated gap 3.65 eV is close to the experiment, 3.25 eV for the indirect bandgap. In DFT (PW91) PW calculations the structural parameters were again found to be quite reasonable but the optical bandgap of 2.59 eV is an evident underestimate, typical for the DFT method. The F center was modeled by removing an oxygen atom in the supercell (see Fig. 10.3). For estmation of the formation energy Ef (F ) of the F center the energy for the spin-polarized isolated oxygen atom (3 P state) was taken and (10.1) was used. A similar approach for the determination of Ef (F ) was used in [734]. In an alternative approach [726,729] the formation energies of the O vacancy were expressed via chemical potentials of O, Sr, and Ti atoms. However, the range of Ef (F ) calculated using both approaches for supercells of different shapes and sizes is not so large as to give a preference to one of them. Table 10.10 shows the dependence of the vacancy-formation energy in SrTiO3 bulk on both supercell shape and size, which is accompanied by the large contribution coming from the lattice relaxation upon vacancy formation. The formation energy is reduced considerably (by 1.5–2.0 eV) when the positions of all atoms in the supercells are fully optimized. This demonstrates that the relaxation of even 14 nearest ions (neighboring Ti, O, and Sr coordination spheres directly shown in Fig. 10.3a) might be somewhat insufficient, and the inclusion of next-nearest coordination spheres is necessary, see Table 10.11. Table 10.10. Dependence of the nearest distance between F centers (dF−F ), formation energy of a single oxygen vacancy Ef (F), and energy barrier Edif f (F) of its (011) diffusion on both shape and size of supercell used for PW calculations, [732] Supercell S80 S135 S160 S270

Extension √ √ √ 2 2×2 2×2 2 3×3 √ √ 3 ×√ 2√3 × 2√3 × 2√3 3 2×3 2×3 2

Type of lattice f cc scc bcc f cc

dF−F Ef (F)(eV) Ediff (F) (˚ A) unrelaxed relaxed (eV) 11.04 9.00 7.73 0.41 11.71 9.17 7.89 0.35 13.52 8.98 7.35 0.50 16.56 8.98 7.17 0.38

The lattice relaxation around the defect is periodically repeated in the supercell model, thus affecting the calculated total energy per cell: the larger the supercell,

442

10 Modeling and LCAO Calculations of Point Defects in Crystals

Table 10.11. Dependence of lattice relaxation for the nearest equivalent atoms around a single F center in a cubic SrTiO3 crystal on shape and size of supercells in PW calculations [732]. Relative radial shifts from unrelaxed positions (%)∗ are given Nearest Distance Number of S80 S135 S160 S270 atoms (in units of a) equiv. atoms Ti 2 7.21 7.16 7.08 8.28 √1/2 O 2/2 8 –7.59 –7.92 –7.98 –7.43 √ Sr 2/2 4 3.51 3.48 3.45 3.42 1.0 4 3.16 2.98 2.49 2.87 O 1.0 2 –1.72 –1.56 –1.67 –1.05 O

S320 7.76 –7.79 3.94 3.56 –1.28



Positive shift corresponds to expansion of the atomic coordinate sphere, whereas negative sign means its compression

the smaller this artifact. The numerical results given in Tables 10.10 and 10.11 are obtained in PW calculations, as complete optimization of the lattice relaxation in the large supercells is extremely time consuming in the LCAO calculations. The calculated defect-formation energies mainly decrease with the increase of the supercell size, but they also depend on the shape of the supercell (compare the corresponding values for fcc 80-atom and sc 135-atom cells). To calculate the energy barrier Edif f (F ) for oxygen-vacancy diffusion a jump of the O atom from the eight possible sites nearest to the F center (Fig. 10.3a) toward the vacancy is considred. The saddle point energy has been estimated by fixing a hopping O atom at the middle of the Sr–Ti–Sr triangle (Fig. 10.3a) crossed by the oxygen migration trajectory, which has been found to be nonlinear, while the rest of the lattice has been allowed to relax to the minimum of the total energy. The Edif f (F ) (Table 10.10) is sensitive to both the shape and size of the SrTiO3 supercell; moreover, for optimized rhombohedral f cc and bcc supercells (Fig. 10.3, b and c), the migration trajectories are not completely equivalent. Nevertheless, migration energies mainly decrease with increase of the supercell size. The sensitivity of the calculated lattice relaxation around the defect to both supercell shape and size is also clearly seen in Table 10.11. For the same type of superlattice (sc, f cc, or bcc), expansion of the first coordination sphere (two Ti ions) is larger, whereas compression of the second sphere (eight O ions) is smaller with increasing size of the supercell. However, the convergence of the lattice relaxation is complex, and a very low concentration of F centers should be used to achieve it. For instance, fcc supercells are stretched along the z-axis and are compressed in the xy-plane (Fig. 10.3b). This causes the larger z-shifts of Ti ions nearest to the O vacancy in 80- and 270-atomic f cc supercells, as compared with 135- and 320-atomic cubic supercells (Table 10.11), whereas xy-shifts of the nearest O and Sr ions are smaller in the former case. Nevertheless, the range of δR for equivalently shifted atoms in equidistant supercells of different shapes and sizes is small enough (≤ 1.0%) to suggest the stabilization of a single O vacancy in a cubic SrTiO3 crystal when using large equidistant supercells containing 270 and 320 atoms. When trying to use the LCAO basis for partial optimization of the total energy for the same supercells, a markedly smaller expansion of the first coordination sphere involving the two nearest titanium ions as compared with complete optimization in

10.3 Point Defects in Perovskites

443

PW calculations (1.5–2% vs. 7–8%) was obtained. The same is true for the nextnearest coordination spheres. While use of the PW basis is more efficient for optimization of the lattice relaxation around a vacancy, the LCAO basis possesses a noticeable advantage when describing the electronic properties of defective crystals. To gain deeper insight into the defective SrTiO3 bulk from LCAO calculations on different supercells in [732] the electron density due to O-vacancy formation was analyzed. Redistribution of the electron density due to O-vacancy formation is shown in Fig. 10.4(a and b) as calculated for the equidistant fcc supercells with different extensions.

Fig. 10.4. Two-dimensional (2D) difference electron-density maps (the total density in the perfect SrTiO3 bulk minus the sum of electron densities of both isolated oxygen atoms and defective SrTiO3 ) projected onto the (110) section plane PP for 80-atom (a) and 270-atom (b) fcc supercells containing a single oxygen vacancy [732]. Dash-dot isolines correspond to the zero level. Solid and dashed isolines describe positive and negative values of electron density, respectively. The isodensity increment is 0.002 e/A−3 .

In both plots, the Mulliken electron charge (1.1–1.3 e) is localized within a neutral O vacancy; in other words, 0.6–0.8 e is equally divided by the two Ti ions nearest to the neutral F center and mainly localized on their 3dz2 orbitals, making the largest contribution to the defect bands shown in Fig. 10.5(a and b). Figure 10.4 clearly demonstrates the effect of size of the f cc-type supercell (80 atoms and 270 atoms) on localization of the charge redistribution. For the 80-atom supercell, mutual interaction of the neighboring O vacancies is clearly seen, especially along the –Ti–O–Ti– axes, whereas for the 270-atom supercell, the more-or-less visible redistribution of the electron density is limited by a region of 1.5–2.0 lattice constants around a vacancy, in the z-direction. From Fig. 10.5 it is seen that the defect-band dispersion becomes very small for a 270-atom supercell demonstrating decreasing the defect–defect interaction. The latter is also manifested in LCAO calculations through the finite defect bandwidth. As noted earlier, a pure DFT (PW91) functional strongly underestimates the bandgap. As is seen from Table 10.12 (the results of LCAO calculations are given), the F-center

444

10 Modeling and LCAO Calculations of Point Defects in Crystals

Fig. 10.5. Band structure of unrelaxed SrTiO3 crystal with a single F center per fcc supercell containing either 80 atoms (a) or 270 atoms (b), [732]. Energy bands corresponding to the F center are split off the conduction bands. Their depth (gap) is shown relative to the bottom of the conduction band at the Γ point

energy level, remaining in the bandgap, approaches the conduction-band bottom, moving from 0.69 eV for the 80-atom supercell (with a bandwidth of 0.15 eV), down to 0.57 eV (0.08 eV) for 160 atoms, and finally reaching the optical ionization energy of 0.49 eV (almost neglecting the dispersion of 0.02–0.03 eV) for supercells of 270 and 320 atoms where the distance between the nearest defects is close to four lattice constants. The results presented in Table 10.12 confirm that the 135-atom supercell is not big enough to reduce defect–defect interactions; its dispersion δε is even larger than for an 80-atom supercell with a different shape, i.e. δε is sensitive to both the shape and size of the equidistant supercell, similar to other properties described before. At the same time, the defect band for the 270-atom supercell (Fig. 10.5b) is almost a straight

10.3 Point Defects in Perovskites

445

Table 10.12. Dependence of the F-center energy-level position with respect to the conduction-band bottom of unrelaxed SrTiO3 crystal with periodically distributed oxygen vacancies (ǫ), its dispersion (δǫ) and distance between the nearest F centers (dF−F ) as a function of the supercell size used in LCAO B3PW calculations [732] with 2 × 2 × 2 k-mesh∗ Supercell S80 S135 S160 S270 S320 ∗

Extension Type of lattice dF−F (˚ A) √ √ √ 2 2×2 2×2 2 f cc 11.04 3×3 √ scc 11.71 √ 3 ×√ 2√3 × 2√3 × 2√3 bcc 13.52 3 2×3 2×3 2 f cc 16.56 4×4×4 sc 15.61

ǫ 0.69 0.72 0.57 0.49 0.49

δǫ 0.15 0.23 0.09 0.02 0.03

The defect-level position is calculated at the Γ point of the BZ

line. Table 10.12 clearly shows that the use of both supercells of 270 and 320 atoms practically eliminates the interaction between periodically distributed point defects. The calculations [732] clearly demonstrate the advantage of combining DFT PW and DFT LCAO calculations. The former is necessary for the complete optimization of both lattice relaxation upon vacancy creation (especially for large supercells) and its migration, whereas the latter allows one to study in more detail the electronic structure for both unrelaxed and relaxed lattices. Such a combined study of the oxygen vacancy in SrTiO3 crystal shows that achieving the convergence with the supercell increases up to 270–320 atoms, the defect–defect interaction becomes negligible, thus approaching a realistic model of a single F center. A similar conclusion follows from the study of the Fe impurities in SrTiO3 , considered in next section. 10.3.2 Supercell Model of Fe-doped SrTiO3 The properties of transition-metal impurities, especially iron, in ABO3 perovskite ferroelectrics are of considerable interest due to their photochromic, photorefractive and other applications. There were several theoretical calculations for ion impurities substituting for B atoms. Molecular-cluster calculations were made to study charged point defects in SrTiO3 –3d3 ions Cr3+ , Mn4+ , Fe5+ [741] and Fe3+ , Fe4+ , Fe5+ ions [742–744]. The formal charges used in designations of impurity ions mean the metal-atom oxidation state. As was already noted the calculated charges on transition-metal atoms in perovskites differ essentially from the formal charges due to strong covalent interaction with oxygen atoms. Bearing in mind that in perfect SrTiO3 crystal Ti4+ means the titanium-atom oxidation state 4, Fe3+ , Fe4+ , Fe5+ ions can be considered as impurity centers with charges –1, 0, +1, respectively. The supercell calculations are known for Fe impurities in KNbO3 [745] in the LDA+U approximation, Li-doped KTaO3 (semiempirical INDO simulations [746] and comparative DFT, PW and INDO calculations [747]). The supercell DFT PW calculations of different donor and acceptor centers in SrTiO3 [748] demonstrated the dependence of the formation energy on doping levels in the bulk crystal. In the majority of calculations cited no lattice relaxation around the impurity was studied, the calculated density of states depends on the parameters, used in the LDA+U or INDO approximations for the Hamiltonian.

446

10 Modeling and LCAO Calculations of Point Defects in Crystals

A combination of first-principles supercell HF and DFT calculations that include lattice relaxations have been used in [680] to investigate the energy levels of neutral Fe4+ substitution on the Ti site. Here we consider these calculations in more detail. A consistent supercell–cyclic-cluster approach was applied for defective solids (see Sect. 10.1.3) with a focus on a detailed treatment of lattice relaxation around a single defect. For a perfect crystal results of periodic HF and DFT calculations based on LCAO approximation are compared. Despite the fact that the supercell approach is widely used in defect calculations, very little attention is paid to the supercell shape and size optimization and the effect of periodically repeated defect interaction. Following the method accepted for the above-considered supercell calculations of native point defects (interstitial oxygen in MgO, F center in Al2 O3 and SrTiO3 ) a study of the convergence of results to the limit of a single defect is one of the main emphases of the calculations [680] on Fe-doped SrTiO3 . The transformation matrices for the supercells used are given in (10.14) in general form and define the equidistant supercells, forming sc, fcc and bcc lattices. In the footnote to Table 10.13 actual transformation matrices used in Fe-doped SrTiO3 calculations are given [680]. For the perfect crystal the special kq points sets corresponding to these supercells satisfy the Chadi–Cohen condition, see (4.83):   Wq exp(ikq Aj ) = 0, m = 0, 1, 2, 3, . . . (10.16) kq

|Aj |=Rm

where the second sum is over lattice vectors of the same length equal with the mth neighbor distance Rm , the first sum is over a set of these special kq points, and Wq are weighting factors equal to the number of rays in their stars. The larger the number m, the better is the electronic-density approximation for the perfect crystal. The numbers M (m = 0, 1, 2, . . .), defined according to (10.16) the accuracies of the corresponding sets, are given in Table 10.13. The ab-initio periodic restricted and unrestricted HF (RHF,UHF) calculations were performed for perfect and defective SrTiO3 crystals, respectively, using the CRYSTAL computer code [23]. This code has the option to perform both HF and DFT calculations on equal grounds, for a large number of implicitly or a posteriori used exchange-correlation functionals that permits one to analyze directly the relevant electron-correlation effects keeping other computational conditions the same. The same LCAO basis set was used in the HF and DFT (PWGGA) calculations. Large-core Durand–Barthelat [484] for Ti and O atoms and Hay–Wadt small-core pseudopotentials [483] for Sr atoms were used. The impurity iron atoms were treated as all-electron atoms. The “standard” basis for Ti and O was taken from previous TiO2 LCAO calculations [574] whereas that for Fe and Sr from [629] and the CRYSTAL code site [23], respectively. The outer Ti, Fe and oxygen O basis functions were reoptimized. To characterize the chemical bonding and covalency effects for both defective and perfect crystals, a standard Mulliken population analysis was used for the effective atomic charges q and other local properties of electronic-structure – bond orders, atomic covalencies and full valencies (these local properties of electronic structure are defined in Sect. 9.1.1). Since the lattice-relaxation calculations around a point defect was one of the aims, the band-structure calculations with the lattice constant a optimization were made

10.3 Point Defects in Perovskites

447

A) obtained for pure HF Table 10.13. Convergence of results for pure SrTiO3 (a=3.905 ˚ (a) and DFT-PWGGA (b) LCAO band calculations corresponding to cyclic clusters of an increasing size [680]. All energies in eV, total energies are presented with respect to the reference point of 80 a.u.=2176.80 eV. q and V are effective atomic charges and valencies (in e), respectively. RM and M are explained in the text Supercell Matrix M RM (˚ A) Etot (eV) V C q(Ti) q(O) q(Sr) a) HF LCAO calculations S8, sc A 4 7.81 –24.288 –6.838 3.393 2.39 21.41 1.84 B 7 11.04 –24.818 –6.895 3.766 2.54 21.46 1.84 S16, f cc S32, bcc C 11 13.53 –24.873 –6.906 3.725 2.54 21.46 1.84 D 14 15.62 –24.873 –6.906 3.720 2.54 21.46 1.84 S64, sc E 24 20.29 –24.883 –6.895 3.744 2.54 21.46 1.84 S108, bcc b) DFT-PWGGA LCAO calculations S8, sc A 4 7.81 –73.059 –4.647 4.367 3.43 21.74 1.79 S16, f cc B 7 11.04 –73.024 –2.735 2.169 2.82 21.51 1.71 C 11 13.53 –70.874 –2.737 1.219 2.55 21.42 1.70 S32, bcc D 14 15.62 –66.101 –2.414 0.027 1.69 21.13 1.70 S64, sc S108, bcc E 24 20.29 –66.134 –2.443 –1.025 1.69 21.13 1.70

V (Ti) V (O) V (Sr) 3.94 3.97 3.98 3.98 3.98

2.07 2.06 2.06 2.06 2.06

2.01 2.01 2.01 2.01 2.01

3.98 3.97 3.99 4.12 4.12

2.06 2.09 2.11 2.18 2.18

2.04 2.04 2.04 2.04 2.04

Transformation matrices ⎞ ⎛ ⎛ ⎛ ⎛ ⎛ ⎞ ⎞ ⎞ ⎞ 3 3 −3 400 2 2 −2 220 200 A = ⎝ 0 2 0 ⎠ , B = ⎝ 2 0 2 ⎠ , C = ⎝ 2 −2 2 ⎠ , D = ⎝ 0 4 0 ⎠ , E = ⎝ 3 −3 3 ⎠ −3 3 3 004 −2 2 2 022 002

˚, for HF, for the perfect crystal. The values obtained were a=3.92, 3.84, and 3.92 A HF-PWGGA and DFT-PWGGA, respectively. The experimental value is a0 =3.905 ˚ A. The bulk modulii are B=222, 242, and 195 GPa, respectively, to be compared with the experimental value (extrapolated to 0 K) B=180 GPa. That is, pure HF gives an error of 0.5% only for the lattice constant, and by 20% overestimates the bulk modulus. Its a posteriori electron-correlation correction, HF-PWGGA, gives too small a value, and B even larger than the pure HF. Use of an optimized basis set results in a=3.93, 3.85, and 3.93 ˚ A for HF, HF-PWGGA, and DFT-PWGGA, respectively. The relevant bulk moduli are B=220, 249, and 191 GPa, respectively. That is, the basis optimization only slightly affected the calculated a and B values. Tables 10.13a and b demonstrate the effect of the cyclic-cluster increase for both HF and DFT-PWGGA methods, respectively. The main calculated properties are: the total energy Etot (per primitive unit cell), one-electron band-edge energies of the valence-band top and conduction-band bottom εv and εc , Mulliken effective atomic charges q and full atomic valencies V . As is seen, the result convergence, as the supercell size increases, is quite different for the HF and DFT. We explain the much slower DFT convergence by a more covalent calculated electron-charge distribution, as compared to the HF case. For both methods, the convergence of local properties of the electronic structure is faster than that for the total and one-electron energies. Based on the results of Table 10.13 the conclusion can be drawn that in the HF LCAO calculations of a perfect crystal, the electronic structure is reasonably well

448

10 Modeling and LCAO Calculations of Point Defects in Crystals

reproduced by the supercell of 80 atoms (L=16). This is confirmed by the bandstructure analysis. The results of the standard band-structure calculations for the SrTiO3 primitive unit cell with Monkhorst–Pack k set 6 × 6 × 6 and the cyclic cluster of 80 atoms (only at the Γ point of the BZ) are very similar. It appears that the most important features of the electronic structure of a perfect crystal (valence- and conduction- bandwidths, local properties of electronic structure) are well reproduced by the cyclic cluster of 80 atoms. The corresponding one-electron energies do not practically change along all the symmetry directions in the narrowed BZ for supercell band calculations. Analysis of the difference electron-density plots, calculated for the band and the 80atom cyclic-cluster calculations confirms that the latter well reproduces the electrondensity distribution in a perfect crystal. Lastly, the total and projected density of states for a perfect crystal show that the upper valence band consists of O 2p atomic orbitals with admixture of Ti 3d orbitals, whereas the Sr states contribute mainly to the energies close to the conduction-band bottom, in agreement with previous studies. However, as follows from Table 10.13, very accurate modeling of pure SrTiO3 by means of DFT-PWGGA needs use of cyclic clusters as large as 320 atoms (L=64). This conclusion agrees with the results of DFT PW supercell calculations on SrTiO3 discussed in the preceding subsection. Table 10.13 has shown that an increase of the cyclic cluster from S16 to S32 does not change the HF-calculated top of the valence band. However, the calculated width of the defect impurity band EW found using a standard Monkhorst–Pack set 6×6×6 for three different supercells (Table 10.14) demonstrates clearly a considerable dispersion of defect energies across the supercell BZ. Table 10.14. The width of the Fe impurity band EW calculated for the relevant supercells Supercell Number of atoms Fe–Fe distance (˚ A) EW (eV) S8 40 7.81 1.42 80 11.04 0.23 S16 160 13.53 0.14 S32

Indeed, the EW decreases rapidly, from 1.42 eV (S8) down to 0.23 eV (S16), and further down to 0.14 eV (S32), when the Fe–Fe distance increases only by a factor of about 2, from 7.81 to 13.53 ˚ A, since an overlap of the impurity atomic functions decreases exponentially. This is why only S32 (160-atom cyclic cluster) is suitable for a careful modeling of the single Fe impurity and lattice relaxation around it. This is in contrast to many previous supercell calculations of defects in perovskites where S8 supercells were often used without any convergence analysis. Mulliken effective charges calculated for ions at different positions in supercells modeling pure and Fe-doped SrTiO3 are summarized in Table 10.15. Table 10.15 demonstrates that the standard band-structure calculation and the S64 cyclic cluster give essentially identical charges. The more so, charges of the same ions in a 320-atom supercell are the same, irrespective of the ion position inside the cyclic cluster. Next, in the defective-crystal calculations, say, for the S32 cyclic

10.3 Point Defects in Perovskites

449

Table 10.15. Effective charges q of ions obtained in the HF band-structure calculations with a Monkhorst–Pack k-set 6 × 6 × 6 and different cyclic clusters modeling perfect and defective SrTiO3 . The lengths in the first column are lattice constants of the relevant supercells the distances R given above the effective charges are calculated with respect to the supercell coordinate origin where the Fe ion is placed R (˚ A) Lattice const.(˚ A) 3.90 (band struct.) 15.62 (S64) (perfect cryst.) 7.81 (S8) 11.04 (S16) 13.53 (S32) 15.62 (S64)

0.00 1.95 3.38 3.90 4.37 5.52 5.86 6.48 6.76 7.04 7.81 q(Fe) q(O) q(Sr) q(Ti) q(O) q(Ti) q(O) q(Sr) q(Ti) q(O) q(Ti) –1.458 1.837 2.538 –1.459 1.837 2.540 –1.459 2.540 –1.459 1.837 2.540 –1.459 2.540 2.583 2.571 2.570 2.570

–1.464 –1.464 –1.464 –1.463

1.835 1.840 1.838 1.838

2.406 2.536 –1.460 2.543 2.534 –1.458 2.540 –1.459 1.837 2.540 2.534 –1.458 2.540 –1.459 1.837 2.540 –1.459 2.539

cluster, the effective charges of atoms close to its boundary are the same as in the perfect crystal. This confirms that the chosen cyclic cluster is large enough. The S32-UHF supercell calculations for the zero-spin and high-spin (S=2) states show that the latter is much lower in energy (by 5.4 eV) (after lattice relaxation). In the perovskite crystalline field a fivefold degenerate Fe 3d state splits into eg and t2g states (see Fig. 10.6) separated by 2.1 eV (for an undistorted lattice).

Fig. 10.6. (a) Schematic view of the Fe impurity with asymmetric eg relaxation of the six nearest O atoms. (b) The relevant energy levels before and after relaxation

In the high spin state with S=2 the upper level is occupied by one α electron and three other α electrons occupy t2g states. As is well known in this case an Eg ⊗ eg Jahn–Teller effect takes place. This means that an orbital degeneracy is lifted by an asymmetrical displacement of six O ions, as shown in Fig. 10.6: four equatorial O

450

10 Modeling and LCAO Calculations of Point Defects in Crystals

atoms lying in the xy-plane relax towards the impurity, whereas the two other O atoms relax outwards along the z axis. This results in two nondegenerate levels close to the valence-band top: the eg level at 0.5 eV above the band edge, and a virtual nondegenerate b2g level lying much higher (Table 10.16). Table 10.16. Positions of one-electron Fe levels (in eV) with respect to the valence-band top calculated by means of HF method for S16 (80 atoms) and S32 (160 atoms) cyclic clusters with and without lattice relaxation Cyclic Before relaxation After relaxation cluster t2g eg a1g b1g eg b2g 80 atoms 0.36 2.31 0.02 0.03 0.5 5.4 160 atoms 0.25 2.50 0.02 0.05 0.5 5.0

If we assume that x, y, z displacements have equal magnitudes, pure HF and HF-PWGGA calculations with the “standard” basis set give practically the same magnitude of the six O displacements δ =0.04 ˚ A, a quite flat minimum and an energy gain of 1.40 eV. This means that we have a combination of the Jahn–Teller and breathing modes of surrounding O-atom dsplacements. With the optimized basis set a slightly smaller energy gain 1.33 eV was obtained. It was checked also whether the magnitudes of the O-atom displacements along the x, y and the z axes could be different and indeed a small additional energy gain, down to 1.42 eV for the following asymmetrical dispacements in the latter case was found: 0.028 ˚ A along the x,y axis and –0.052 ˚ A along the z axis, i.e. outward displacements of two O atoms are twice larger than those for four equatorial O atoms. Note that UHF calculation effectively incorporates the spin-dependent electron-correlation effects during the self-consistent loops and thus gives nearly the same results as HF with a posteriori (nonself-consistent) corrections for electron correlations. The total valence of the iron impurity VFe =3.3 correlates much better with the Fe4+ model than with the calculated Mulliken effective charge of +2.59. These effective charges q of atoms collected in Table 10.17 demonstrate considerable covalency effects, well known for ABO3 perovskites. Table 10.17. The effective Mulliken charges of atoms q and bond orders W (in e) for S32 HF cyclic cluster with unrelaxed and relaxed lattices SrTiO3 Pure

q(Ti) q(Ox,y ) q(Oz ) W (Ti–Ox ) W (Ti–Oz ) 2.540 –1.459 –1.459 0.375 0.375

Fe-doped q(Fe) q(Ox,y ) q(Oz ) W (Fe–Ox ) W (Fe–Oz ) Unrelaxed 2.570 –1.464 –1.464 0.164 0.164 0.235 0.154 Relaxed 2.594 –1.440 –1.534

10.3 Point Defects in Perovskites

451

In particular, in pure SrTiO3 the effective charges are q(Ti)=+2.54, q(Sr)=+1.84, and q(O)=–1.46. The Ti–O bond order in a pure crystal is 0.375. When the two O atoms are displaced outwards from the Fe impurity along the z axis and thus approach the nearest Ti atoms, the Ti–O bond order increases to 0.489. The combination of a large lattice relaxation energy and relatively small O displacements is not surprising in the light of a considerable covalent bonding between the unpaired iron electrons occupying Fe 3d orbitals and 2p orbitals of four equatorial oxygen ions: the Fe–Ox,y bond orders (Table 10.17) increase upon mutual approach of these atoms from 0.164 to 0.235.

Fig. 10.7. (a) The electronic-density plots for the (010) cross section of Fe and nearest ions in SrTiO3 as calculated by means of the HF method for the cyclic cluster of 160 atoms. Isodensity curves are drawn from 20.8 to 0.8 e a.u.−3 with an increment of 0.0022 e a.u.−3 , b) the same as (a) for the (001) section, (c) the same for the (110) section. Left panels are HF difference electron densities, right panels are spin densities.

Analysis of the total electron-density and spin-density distribution (Fig. 10.7) shows that in the HF calculation four unpaired electrons are well localized on the Fe ion. Lastly, a comparison of the band structures for the cyclic cluster containing the Fe impurity with that for a pure crystal clearly demonstrates that the Fe impurity induces additional energy levels below the valence band (in the region around –20 eV) and above the valence band, at around –2 eV. These bands have practically no dispersion over the BZ, which demonstrates that the defect is almost isolated from its periodic images. Any method is not completely universal, and the approach described also has its limitations. In particular, it does not work when incorporation of the lattice relaxation qualitatively changes the electron localization (e.g. , for free electron and hole polarons). On the other hand, it could be very efficient for many impurities in insulators characterized by high symmetry and when calculating forces is computationally expensive.

452

10 Modeling and LCAO Calculations of Point Defects in Crystals

It was demonstrated that the size of the cyclic cluster large enough for a correct reproduction of the perfect crystal depends on the particular quantum-mechanical method; for SrTiO3 this means 80-atom cyclic clusters for the HF but 320 atoms for the DFT-PWGGA. In the HF defect calculations for the single Fe+ impurity the cyclic cluster should not be smaller than 160 atoms. This is in contrast with many previous supercell calculations on perovskites where supercells as small as S8 were used without convergence analysis. It was already mentioned in Chap. 9 that the HF method typically overestimates the optical gap, whereas DFT underestimates it. This can affect the electronic-density distribution (chemical-bond covalency) and defect-level positions within the gap (even determined with respect to the valence-band top). In this respect, the hybrid HFDFT methods widely used in the molecular chemistry, e.g. , B3LYP, seem to be more promising tools. The calculations [680] have demonstrated the strong covalent bonding between unpaired electrons of Fe impurity and four nearest O ions relaxed towards an impurity. The positions of Fe energy levels in a SrTiO3 gap are very sensitive to the lattice relaxation that was neglected in previous studies. The predicted positions of the Fe energy levels with respect to the valence-band top could be checked by means of UPS spectroscopy whereas the local lattice relaxation around iron and its spin state was checked by means of EXAFS. The results of the calculations under consideration are important since the single Fe4+ ions were not detected by ESR (only Fe4+ -O vacancy complexes were experimentally studied) and their optical absorption bands at 2.1 and 2.8 eV [749] are tentative. Note that the high-spin state of Fe4+ impurity predicted in ab-initio calculations contradicts previous semiempirical and nonself-consistent calculations (Xα − FeO6 cluster calculation [742] and tight-binding calculation [743]).On the other hand, a high spin state is indirectly supported by its observation for host Fe ions in SrFeO3 perovskite. We conclude this chapter by discussion of the supercell use for the solid-solution modeling. In this case the supercells of different size allow different percentages of doping in solid solution to be modeled. 10.3.3 Modeling of Solid Solutions of Lac Sr1−c MnO3 One of the extensively studied perovskite-type materials, Lac Sr1−c MnO3 (LSM), is of special interest due to numerous applications, particularly as the cathode for solid oxide fuel cells [750]. LSM was investigated both theoretically [751, 752] and experimentally [753] with a focus on the chemical-bonding nature, magnetic properties, metal–insulator transitions, structural transformations and surface properties. Numerous efforts were undertaken to study the phase transformations and phase stability in LSM in a wide range of solid solutions. These materials exhibit a complicated dependence of the properties on the concentration of the Sr dopant and oxygen nonstoichiometry. Nowadays, it is well recognized that the dielectric, piezoelectric and other LSM properties are entirely related to the phase equilibrium and the phase separation that occurs under different thermodynamic conditions. In what follows we discuss the results of ab-initio supercell studies of the relative stability of different LSM phases [754]. To perform the ab-initio calculations the program packages WIEN-2k [378] and CRYSTAL-03 [23] were used.

10.3 Point Defects in Perovskites

453

The spin-polarized DFT FPLAPW and LCAO electronic and atomic-structure calculations [754] use the exchange-correlation PBE functional. The basis set of augmented plane waves combined with local orbitals (APW+lo) is used in the WIEN-2k code for solving the Kohn–Sham equations. In this method the unit-cell volume is divided into two regions: (I) nonoverlapping atomic spheres centered at the atomic sites and (II) an interstitial region. In the two types of regions different basis sets are used. Inside atomic sphere i of radius Ri , where electrons behave as they were in a free atom, a linear combination of radial functions times spherical harmonics is used. In the interstitial region between these atomic spheres, where the electrons are more or less “free,” a plane-wave expansion is used. On the sphere boundary the wavefunctions of both regions are matched by a value. The APW+lo basis set has a significantly smaller size than the basis set in the LAPW method and thus the computational time is drastically reduced. Nevertheless, these two schemes converge practically to identical results. The convergence of the method is controlled by a cutoff parameter Rmt Kmax , where Rmt is the smallest atomic sphere radius in the unit cell and Kmax is the magnitude of the largest k-vector in the reciprocal space. To improve the convergence of the calculations it is necessary to increase this product. A reasonably large Rmt can significantly reduce the computational time. A value of Rmt =1.7 a.u. was chosen and a plane-wave cutoff Rmt Kmax = 9. The calculations [754] are performed for the high-temperature cubic phase of LaMnO3 (LMO)-based crystals doped with Sr, substituting for La atoms in different fractions. This substitution results in a charge-compensating hole formation. The formation of other defects like oxygen or metal vacancies is neglected. To model the LaMnO3 doped by Sr (LSM), a 2 × 2 × 2 supercell is used, which consists of eight primitive unit cells and thus contains 40 atoms. The WIEN-2k code generates the k-mesh in the irreducible wedge of the Brillouin zone (BZ) on a specialpoint grid that is used in a modified tetrahedron integration scheme (500 k-points were used). The accuracy in total-energy calculations was 10−4 Ry. Different configurations of Sr atoms substituting for La atoms allow ordered LSM solid solutions to be modeled. In particular, La0.875 Sr0.125 MnO3 is typically used in fuel cells and thus is the subject of detailed thermodynamic study. The calculations are carried out for the ferromagnetic spin alignment (all Mn spins in the supercells are oriented in parallel), which results in a metallic character of the resistivity [753]. However, the resistivity of this phase is larger by three orders of magnitude than that of a typical metal. This is confirmed by FP LAPW band-structure calculations: a very small density of states (DOS) in the vicinity of the Fermi level is observed. The model used is in agreement with the calculations [752] where the ferromagnetic state was revealed for layers of a cubic La0.7 Sr0.3 MnO3 . In [754] DFT B3LYP LCAO calculations for Lac Sr(1−c) MnO3 mixed crystals (c =0, 0.125, 0.5, 1.0) were performed, see Fig. 10.8. La, Sr and Mn core electrons were described by Hay–Wadt small-core (HWSC) pseudopotentials [483]. For the oxygen atoms an all-electron 8-411(1d)G basis was taken from previous MnO calculations [628], performed with basis-set (BS) optimization. For La, Mn and Sr ions BSs 411(1d)G, 411(311d)G and 311(1d)G were taken from La2 CuO4 [755] calculations, the CRYSTAL web site [23] and SrTiO3 calculations [606], respectively. To achieve a high numerical accuracy in the lattice and in the BZ summations, the cutoff threshold parameters of the CRYSTAL03 code for Coulomb and exchange

454

10 Modeling and LCAO Calculations of Point Defects in Crystals

Fig. 10.8. Four structures used in calculations of Lac Sr1−c MnO3

integrals evaluation to 7, 7, 7, 7 and 14, respectively, were taken. The integration over the BZ has been carried out on the Monkhorst–Pack grid of shrinking factor 8 (its increase up to 16 gave only a small change in the total energy per unit cell). The self-consistent procedure was considered as converged when the total energy in the two successive steps differs by less than 10−6 a.u. As the first step, B3LYP spin-polarized LCAO calculations for the cubic LaMnO3 and SrMnO3 (with one formula unit per primitive cell) are performed, using the maximal spin projection Sz = 2 for four d-electrons of the Mn3+ ion. As we have seen in Chap. 9, such a spin projection ensures the lowest total energy compared with Sz = 0, 1. The optimized cubic lattice constants are a=3.967 ˚ A and a=3.840 ˚ A for LaMnO3 and SrMnO3 , respectively. These values are in a reasonable agreement with the experimental lattice constants a=3.947 ˚ A and a=3.846 ˚ A, respectively. The two optimized cubic lattice constants for LaMnO3 and SrMnO3 were used for calculating the lattice constants of their solid solutions according to Vegard’s law (linear dependence of the lattice parameters on the composition). As follows from the WIEN-2k calculations, this is fulfilled quite well in this system. To predict the relative stability of different phases, which might appear in the quasibinary phase diagram of LSM solid solutions in a wide range of dopant concentrations, the statistical thermodynamic approach combined with the ab-initio calculations was used. Such an approach has been successfully applied to different systems (see, e.g. , [756–758] and references therein). The standard periodic ab-initio approach could be used only for ground-state energy calculations and ordered structures and thus does not allow prediction of thermodynamic stability of these phases as the temperature grows. This forces the problem to be reformulated so as to permit the extraction of the necessary energy parameters from the calculations for the ordered phases, and to apply these parameters to the study of the disordered or partly ordered solid solutions, in order to get information on the thermodynamic behavior of LSM solid solutions. From the exper-

10.3 Point Defects in Perovskites

455

imental data [759] it follows that in these solid solutions Sr atoms substitute for La at all atomic fractions, 0 < c < 1. Therefore, it is possible to consider the LSM solid solution as formed by La and Sr atom arrays occupying the sites of a simple cubic lattice immersed in the external field of the remaining lattice of Mn and O ions. The thermodynamics of such solid solutions can be formulated in terms of the effective interatomic mixing potential, which describes the interaction of La and Sr atoms embedded into the field of the remaining lattice. The study is based on the calculation of the relative stabilities of different ordered LSM cubic phases. Figure 10.8 illustrates four phases: three of them (a, b, c) correspond to c =0.5, the last one (i) with c =7/8 corresponds to 12.5% Sr-doped LaMnO3 . The remaining phases in Table 10.18 are the same as those used in Bac Sr(1−c) O3 calculations [756]. Table 10.18. Total energies Etot per 2 × 2 × 2 cell, for Lac Sr1−c MnO3 compositions and equilibrium lattice parameters aeq for different structures, see [754] and Fig. 10.8.

Structure a b c d e f g h i LaMnO3 SrMnO3

c 0.5 0.5 0.5 0.25 0.75 0.25 0.75 0.125 0.875

WIEN-2k Etot (Ry) aeq (˚ A) –115574.4034 3.881 –115574.4248 3.881 –115574.4178 3.879 –94302.8877 3.862 –136845.8880 3.901 –94302.8725 3.865 –136845.8763 3.901 –83667.1051 3.855(3.828)∗ –147481.5822 3.914 –158117.2795 3.921(3.947)∗ –73031.3269 3.848(3.806)∗

Crystal-03 Etot (Ry) aeq (˚ A) –5771.8383 3.903 –5771.8688 3.903 –5771.8812 3.903

–5776.8921 3.951 –5778.3816 3.967 –5764.9568 3.840

*For the references to these experimental data see in [754].

In the concentration wave (CW) theory [760] the distribution of atoms A in a binary A–B alloy is described by a single occupancy probability function n(r). This is the probability to find the atom A (La) at the site r of the crystalline lattice. The configurational part of the free energy of solid-solution formation (per atom) includes the internal formation energy ∆U , the function n(r), a concentration of particles La(A), the effective interatomic potentials between La atoms (A) and Sr atoms (B), for details see [754]. To find the internal formation energies, which are differences between total energies of superstructures and the reference-state energy, the energy of a heterogeneous mixture, cLaMnO3 + (1-c)SrMnO3 , has been chosen for the reference state. This energy is calculated as the sum of weighted (according to the atomic fractions) total energies of the two pure limiting phases, LaMnO3 and SrMnO3 . From ab-initio calculations the total energies Etot and equilibrium lattice constant for all superstructures are obtained, Table 10.18. The internal formation energies for ordered phases (Table 10.19) are calculated by the definition

456

10 Modeling and LCAO Calculations of Point Defects in Crystals

  LaMnO3 SrMnO3 ∆U = Etot − cEtot + (1 − c)Etot

(10.17)

Table 10.19. Formation energies of different superstructures (in eV per atom on La/Sr sublattice) as calculated by means of the WIEN-2k (FPLAPW) and CRYSTAL-03 (LCAO) codes, [754] Configuration FPLAPW LCAO a 0.170 0.288 0.207 0.339 b c 0.195 0.360 0.080 0.320 i

All these energies calculated using two very different DFT methods (FPLAPW and LCAO) are negative, i.e. the formation of these ordered phases is energetically favorable with respect to their decomposition at T =0 K into a heterogeneous mixture of LaMnO3 and SrMnO3 phases. It is easy to see from Table 10.18 that at the stoichiometric composition c=1/2 the ordered phases a, b, c (which have different local impurity arrangements in the supercell) are energetically more favorable than other phases. Also, these three phases differ slightly between themselves in the formation energies. The absolute values for formation energies, given in Table 10.19, are larger in LCAO calculations than those from FPLAPW calculations, especially for the “i” configuration. In order to check this point, additional LCAO calculations were performed using two different hybrid exchange-correlation functionals (B3LYP and B3PW) and optimized lattice constants in all four configurations. However, the results are very close to those obtained by using Vegard’s law. Therefore, the only reason for the energy discrepancy is the use of different computational schemes. However the use of two different methods allows more reliable information to be obtained. In this particular case, both methods give qualitatively similar results. Using these formation energies it is possible to calculate the temperature evolution of the long-range order (LRO) parameters of the superlattices. The LRO parameters characterize the atomic ordering in sublattices of the ABO3 -type perovskite. Their values were taken to be equal to unity (which corresponds to completely ordered phases at stoichiometric compositions). The concentration was taken to be equal to the stoichiometric compositions of the corresponding phases. Finally, the free energy of formation of the phase La0.875 Sr0.125 MnO3 was calculated (we refer the reader to [754] for details). The calculations of LSM solid solution considered here demonstrate the efficiency of use of thermodynamic formalism based on combination of the ab-initio electronicstructure calculations as developed in [754,756–758].The main feature of this approach is the treatment of ordered superstructures presenting the La-Sr sublattice immersed in the field of the remaining lattice formed by Mn and O atoms. The total-energy calculations allow the formation energies of these superstructures for different compositions to be found and their competition at T =0 K to be analyzed. These calculations for a series of ordered structures permit extraction of the key energy parameters – the

10.3 Point Defects in Perovskites

457

Fourier transforms of the mixing potential and thus the free energy for temperature induced partly disordered structures to be determined. Using the 12.5% Sr-doped LaMnO3 a thermodynamic analysis was performed [754]. It was predicted, in particular, that disordering of this phase with respect to the decomposition into the heterogeneous mixture of LaMnO3 and SrMnO3 can occur only at temperatures above the melting point. This is in contrast to a similar study of isostructural Bac Sr(1−c) TiO3 solid solution where below a certain temperature Ba impurities in SrTiO3 tend to form BaTiO3 nanoclusters. In this chapter we have seen that in modern quantum chemistry of solids the firstprinciples periodic calculations are successfully extended to formally aperiodic systems – defective crystals and solid solutions. In the next chapter we consider the application of periodic models in the calculations of crystalline surfaces and adsorption.

11 Surface Modeling in LCAO Calculations of Metal Oxides

11.1 Diperiodic Space Groups and Slab Models of Surfaces 11.1.1 Diperiodic (Layer) Space Groups To model the electronic structure of surface states of crystals three basic approaches are used: the cluster, slab (single and periodic), and semi-infinite crystal models. The latter is the most exact because it takes into account all the atoms of the crystal with a surface. A semi-infinite crystal is a three-dimensional (3D) object. Its symmetry group contains, in addition to translations in the surface plane, only the rotations and mirror reflections that keep the atoms in the planes parallel to the surface. Only 17 such groups exist. Formally, these groups are isomorphic with diperiodic space groups in two dimensions. They are called plane groups. In the molecular-cluster approach a crystal with a surface is modeled by a finite system consisting of the atoms on the surface and of some atomic planes nearest to it. The diperiodicity of the surface is not taken into account. The symmetry of such a model is described by one of the crystallographic point groups. In the single-slab model a crystal with a surface is approximated by a slab of finite thickness. The symmetry group of this model allows the existence of symmetry operations that move the atoms out of the plane of the layer but bring them into positions occupied by other atoms of the slab. These are space diperiodic groups in three dimensions. They are also called the layer groups. We denote them by DG. These groups also describe the symmetry of thin films. In layered crystals the interaction between the nearest layers is usually weaker than that between nearest atoms in the same layer plane. Therefore, the slab model is a convenient approximation for such crystals. Layer groups describe the symmetry of this model. Diperiodic (layer) groups are the symmetry groups of three-dimensional (3D) objects with two-dimensional (2D) periodicity. In plane-wave calculations the periodic (repeated) slab model is used. In this model the slab is periodically repeated along the normal to the slab surface plane. This repeating of the slab restores the 3D periodicity of the surface model. The symmetry group of the periodic slab is a space group (Chap. 2) – three-dimensional group with three-dimensional translations.

460

11 Surface Modeling in LCAO Calculations of Metal Oxides

The layer groups DG belong to the so-called subperiodic groups. The latter include 7 frieze groups (two-dimensional groups with one-dimensional translations), 75 rod groups (three-dimensional groups with one-dimensional translations), and 80 layer groups (three-dimensional groups with two-dimensional translations). The information presented about the subperiodic groups in [761] is in the same format and consists of the same content as that provided in [19] for space groups G. In [761] a relationship is considered between space and subperiodic groups: given a crystal of a specific space-group symmetry and a plane transecting the crystal, one can enquire as to what is the layer subgroup of the space group that leaves this plane invariant. The physical motivation for answering this question is clear as this problem arises, for example, in the surface modeling by a single slab. The information about subperiodic groups is followed in [761] by the scanning tables in which the layer symmetries of sectional planes are tabulated for all crystallographic orientations and for all positions (locations) of these planes. These tables also contain explicitly the orbits of these planes (an orbit is defined as a set of planes connected by the symmetry operations) and implicitly, via the so-called “scanning groups”, information about the rod symmetries of straight lines that penetrate through the crystal. Rod groups are used for studying polymers, nanotubes, quantum wells. Diperiodic group DG contains a subgroup of two-dimensional translations T (2) with elements (E|an ), where an = n1 a1 + n2 a2

(11.1)

is an arbitrary translation vector of the plane lattice, and a1 , a2 are unit cell (primitive) translation vectors. The ends of all vectors an beginning at some origin O form a two-dimensional Bravais lattice. The point-symmetry group FDG of this lattice must satisfy the following requirements: symmetry axes of order n (with n > 2) must be perpendicular to the plane of vectors a1 , a2 (layer plane), reflection planes must be either perpendicular or parallel to this plane. These requirements restrict the number of possible two-dimensional lattices. The two-dimensional lattice of a layer group is also a two-dimensional lattice of a plane group (two-dimensional groups with two-dimensional translations). There exist five plane lattices, distributed over four crystal systems: oblique, rectangular (2 lattices – primitive and centered), square and hexagonal. The point symmetry of the oblique, rectangular, square and hexagonal systems is given by C2 , C2v ,C4v and C6v point groups, respectively. Note that in a plane lattice the inversion at the origin of the coordinate system is equivalent to the rotation through the second-order axis normal to the plane. Screw axes in layer groups may be only the second-order axes lying in the layer plane. Improper translations in operations of reflection in glide planes (parallel or perpendicular to the layer plane) must be oriented along the layer plane. One can find the information about subperiodic groups on the Bilbao Crystallographic server [16]. These groups are specified by their number as given in [761] or by the international symbols. The international symbol of layer group DG contains, first, the information about the plane Bravais lattice type: P (primitive) or C (centered). Then the information about symmetry elements is given. The screw axes (of second order) have the subscript 1. The reflection planes are denoted as follows: m (mirror planes), n, a, b (glide planes, depending on the direction of the improper translations).

11.1 Diperiodic Space Groups and Slab Models of Surfaces

461

The subperiodic groups are described by means of a crystallographic coordinate system consisting of a crystallographic origin, denoted by O, and a crystallographic basis. The conventional basis vectors for the three-dimensional layer groups are labeled a, b, and c. Unlike space groups, not all basis vectors of the crystallographic basis are lattice vectors (for primitive lattices vectors a and b coincide with the primitive translations a1 , a2 ). Like space groups, the crystallographic coordinate system is used to define the symmetry operations and the Wyckoff positions. The symmetry operations are defined with respect to the directions of both lattice a, b and nonlattice c basis vectors. A Wyckoff position, denoted by a coordinate triplet (x, y, z) for the three-dimensional layer groups, is defined in the crystallographic coordinate system by O + r, where r = xa + yb + zc. Like space groups, the term setting will refer to the assignment of the labels a, b, and c (and the corresponding directions [100], [010] and [001], respectively) to the basis vectors of the crystallographic basis. In the standard setting, those basis vectors that are also lattice vectors are labeled for layer groups with their two-dimensional lattice by a and b. The Wyckoff positions for the 80-layer groups can be found in [16, 761]. Note that the setting of the layer groups for rectangular lattices may be chosen different for the same group (symbols P 211 or P 121 refer to the same group in two different settings) but at the same time P 112 and P 211 denote different layer groups. In the first group the axis of second order (oriented along the z-axis) is perpendicular to the layer plane, in the second it lies in the layer plane xy and is directed along the x-direction. In the first case, the second-order axis is oriented along the plane translation lattice vector, in the second case along the nonlattice vector. Respectively, the Wyckoff positions for both groups are different, see [16]. Any element of the layer group may be written as (Ri |v i + an ), where an and v i are lattice and improper translations, i=1,2. Let a3 be a vector that does not lie in the layer plane. A set of elements (E|n3 a3 ) forms a group T3 of one-dimensional translations. Consider the elements (Ri |v i + an )(E|n3 a3 ),

(Ri |v i + an ) ∈ DG, i = 1, 2,

(E|n3 a3 ) ∈ T3

(11.2)

The set (11.2) of symmetry operations contains a group of three-dimensional translations (E|an + n3 a3 ) ∈ T. The set (11.2) is some space group provided the translational symmetry (the group T) is compatible with the point symmetry FDG of the layer group DG. This condition is fulfilled if the vector a3 is chosen perpendicular to the layer plane. Indeed, the translations (E|an ) ∈ T (2) ⊂ T are compatible with FFD as they are the elements of DG. The compatibility of the translations (E|n3 a3 ) ∈ T3 with point group FFD follows from the fact that the rotations (proper and improper) from DG transform the layer into itself and, therefore, the vector perpendicular to the layer is transformed into a vector also perpendicular to the layer. Thus, the set of elements (11.2) forms one of the three-periodic space groups G. Moreover, the translational group T3 is invariant in G: with the translation (E|a3 ) it contains also the translation (E|Ri a3 ) for any Ri from (11.2). Therefore, the group G may be expressed as a semidirect product G = T3 ∧ DG and be decomposed into cosets with respect to T3

(11.3)

462

11 Surface Modeling in LCAO Calculations of Metal Oxides

G=

 i

(Ri |v i + an )T3 ,

(Ri |v i + an ) ∈ DG, i = 1, 2

(11.4)

Thus, subperiodic layer group DG is isomorphic to factor group G/T3 . A relationship between factor groups of space groups and subperiodic groups is studied in [762,763]. Table 11.1 gives correspondence DG ↔ G/T3 between three-dimensional diperiodic (DG) and three-periodic (G) space groups. This correspondence was at first given by Wood [764] in the setting that differs for rectangular diperiodic groups from that given in Table 11.1 (the setting in this Table corresponds to the standard setting of [761]). The layer and rod groups isomorphic to factor groups of space groups (the corresponding space groups are called reducible space groups) have been tabulated [763]. Table 11.1. Correspondence between three-dimensional two-periodic (DG) and threeperiodic (G) space groups (DG ↔ G/T3 ), [761].

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

DG P1 P1 P 112 P 11m P 11a P 112/m P 112/a P 211 P 21 11 C211 P m11 P b11 Cm11 P 2/m11 P 21 /m11 P 2/b11 P 21 /b11 C2/m11 P 222 P 21 22 P 21 21 2 C222 P mm2 P ma2 P ba2 Cmm2 P m2m

G C11 1 Ci1 2 C21 3 Cs1 6 Cs2 7 1 C2h 10 4 C2h 13 C21 3 C22 4 C23 5 Cs1 6 Cs2 7 Cs3 8 1 C2h 10 2 C2h 11 4 C2h 13 5 C2h 14 3 C2h 12 D21 16 D22 17 D23 18 D26 21 1 C2v 25 4 C2v 28 8 C2v 32 11 C2v 35 1 C2v 25

28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

DG P m21 b P b21 m P b2b P m2a P m21 n P b21 a P b2n Cm2m Cm2a P mmm P maa P ban P mam P mma P man P baa P bam P bma P mmn Cmmm Cmma P4 P4 P 4/m P 4/n P 422 P 421 2

G 2 C2v 26 2 C2v 26 3 C2v 27 4 C2v 28 7 C2v 31 5 C2v 29 6 C2v 30 14 C2v 38 15 C2v 39 1 D2h 47 3 D2h 49 4 D2h 50 5 D2h 51 5 D2h 51 7 D2h 53 8 D2h 54 9 D2h 55 11 D2h 57 13 D2h 59 19 D2h 65 21 D2h 67 C41 75 S41 81 1 C4h 83 3 C4h 85 D41 89 D42 90

The numbers of 17 plane groups are underlined.

55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80

DG P 4mm P 4bm P 42m P 421 m P 4m2 P 4b2 P 4/mmm P 4/nbm P 4/mbm P 4/nmm P3 P3 P 312 P 321 P 3m1 P 31m P 312/m P 32/m1 P6 P6 P 6/m P 622 P 6mm P 6m2 P 62m P 6/mmm

G 1 C4v 99 2 C4v 100 1 D2d 111 3 D2d 113 5 D2d 115 7 D2d 117 1 D4h 123 3 D4h 125 5 D4h 127 7 D4h 129 C31 143 1 C3i 147 D31 149 D32 150 1 C3v 156 2 C3v 157 1 D3d 162 3 D3d 164 C61 168 1 C3h 174 1 C6h 175 D61 177 1 C6v 183 1 D3h 187 3 D3h 189 1 D6h 191

11.1 Diperiodic Space Groups and Slab Models of Surfaces

463

For some layer groups of oblique and rectangular crystal systems (DG 1, 2, 8–18) the vector a3 may be inclined to the layer plane. In the cases when a space group G may be represented as a semidirect product (11.3)) in two different manners it generates two nonisomorphic layer groups. For example, the layer groups P 112 and P 211 are related to one space group P 2(C21 ) with two different settings (the second-order axis is oriented along the z- and x-directions, 4 respectively). The space group P 2/b (C2h ) generates two layer groups P 112/a and P 2/b11. In the first group the rotation axis is perpendicular to the layer and the layer plane itself is a glide plane with an improper translation on a half-period along the x-direction. In the second group the rotation axis is directed along the x-axis; the glide reflection plane is perpendicular to the layer (and to the rotation axis) and reflection in this plane is followed by improper translation on the half-period along the y direction. The latter corresponds to the space group, with a nonconventional setting. A particular case of layer groups is that of the so-called plane groups mentioned above. Formally, they are the symmetry groups of diperiodic systems in two dimensions. They correspond to the layer groups that do not contain the rotation axes lying in the layer plane and the reflection planes coinciding with the layer plane. Semiinfinite crystals with plane diperiodic surfaces have plane groups as the groups of symmetry. The Wigner–Seitz (WS) cell for an arbitrary group DG is a right prism with a directrix lying in the layer plane. The projection of the Wigner–Seitz (WS) cell on the layer plane is a polygon constructed from the basis vectors a1 and a2 [13]. The WS cell of the corresponding triperiodic group G is derived by construction of additional planes perpendicular to the vectors a3 (and perhaps to their integer combinations with the vectors a1 and a2 ) and passing though their midpoints. Thus, the WS of the group G is a part of that for the corresponding group DG. The site-symmetry groups of Wyckoff positions for the majority of positions belonging to both WS cells (of G and of DG) are identical since they are determined by the same set of symmetry operations. The only exception may be for the points on the sides of the group G cell that are absent in that of the group DG. The existence of translational symmetry in the third dimension in the group G may give rise to additional symmetry operations in site-symmetry groups for these points in the group G with respect to DG. The part of the WS cell of the layer group DG that has no common points with the cell of the corresponding group G contains the points of general position and the points with site symmetry defined by vertical planes and rotation axes. These types of site symmetry are already represented in the common part of the cells for G and DG. Therefore, the set of points with different types of site symmetry in the group G is larger than that in the group DG. Thus, the points of different types of site symmetry (Wyckoff positions) in DG may be specified by the same roman letters as in the corresponding groups G [16]. In layer groups the inversion center and the points of intersection of vertical and horizontal symmetry elements may be situated only in the layer plane. This means that the symmetry points of the Wigner–Seitz cell for a layer group DG may appear only in its intersection with the layer plane. An example illustrating the Wyckoff positions connection in space 5 group C2h and layer DG 18, is given in [13].

464

11 Surface Modeling in LCAO Calculations of Metal Oxides

It can be shown that all the irreps of DG are contained in the irreps of the related space group G. The simple connection between the irreps of G and DG may be established using (11.3), i.e. isomorphism DG ↔ G/T3 : every irrep of DG is related to a definite irrep of G (of the same dimension). In these irreps of G all the elements of the coset (Ri |v i +an )T3 are mapped by the same matrix. In particular, all the translations in T3 (coset (E|0)T3 ) are mapped by unit matrices. We refer the reader to Chap. 6 in [13] for details. The same approach can be used to connect irreps of space group G with those of subperiodic rod group RD ↔ G/T (2) (T (2) is the two-dimensional group of translations in a plane that does not contain the one-dimensional translations of a rod group), [765]. The two-dimensional plane groups and the corresponding layer groups are isomorphic (see Table 11.1) and therefore have the same sets of irreps. The theory of induced reps described in Chap. 3 for triperiodic space groups G may be easily applied to diperiodic groups DG. The tables of simple induced reps of DG may be directly constructed by using this theory [13]. The induced reps of layer groups are useful when analyzing electron-density localization on a crystal surface. Such analysis is important in the study of chemisorption of atoms and molecules. In order to understand the principal features of the origin of surface states it is important to know how the energy bands of a crystal look in terms of the diperiodic specification. The comparison of bulk and surface states according to the symmetry is based on the relation between the irreps of the corresponding tri- and diperiodic groups G and DG. The bulk states are specified by the wavevector k(3) in the threedimensional BZ (BZ-3) for the group G. The surface states are classified by k(2) in the two-dimensional BZ (BZ-2) of the layer (plane) group DG. The choice of the translation vectors a1 and a2 in the surface plane defines its orientation relative to (3) the primitive translation vectors ai (i = 1, 2, 3) of the corresponding space group G. The surface is identified by three integers (hkl) – Miller indices, specifying the atomic planes in the crystal by means of the components of a vector perpendicular to that plane. Planes perpendicular to crystallographic axes X, Y, Z are indicated (h00), (0k0) and (00l), respectively. In particular, the planes closest to the origin are identified with indices (100), (010) and (001). Planes parallel to one of the three axes X, Y, Z are indicated (0kl), (h0l) and (hk0), respectively. When the surface reconstruction effects (change of the surface plane translational symmetry with respect to that of the perfect crystal) may be neglected, the symmetry group DG of a crystal with a surface is a subgroup of the bulk crystal group G. However, the BZ-2 depends on the indices of the surface plane. Consider, for example, crystals with face-centered cubic Bravais lattices. For the (001), (110) and (111) sections the plane lattices are square, rectangular and hexagonal, respectively. The basic translation vectors of the direct and reciprocal lattices for these three cases are given in Table 11.2 (a1 and a2 are given in units a/2, B i in units 2π/a, where a is the cubic lattice parameter). Note that for a cubic lattice the planes (100), (010) and (001) are equivalent. The equivalence takes place also for (110), (101), and (011) planes. We see that the vectors B i (i = 1, 2) are now not the translation vectors of the three-dimensional reciprocal lattice. Therefore, the boundaries of BZ-2 do not coincide with those of BZ-3. Figure 11.1 shows the Brillouin zones corresponding to the surface (001), (110) and (111) inscribed in the three-dimensional Brillouin zone for a face-centered cubic lattice.

11.1 Diperiodic Space Groups and Slab Models of Surfaces

465

Table 11.2. Vectors of basis translations for three sections of a face-centered cubic Bravais lattice

Surface translation vectors (001) (110) (111) a1 110 –110 1–10 a2 1–10 002 10–1 110 –110 2/3,–4/3, 2/3 B1 1–10 001 2/3, 2/3,–4/3 B2

Fig. 11.1. Brillouin zones for a face-centered cubic lattice and surfaces (a) (001), (b) (110), (c) (111)

Note that some nonequivalent points of BZ-3 become equivalent in BZ-2 (for example, the points X for the surface (001) and the points L for the (110) surface). Some points of BZ-2 have higher symmetry than in BZ-3 (for example, the vertices of BZ-2 for the (111) surface). These properties of BZ-2 arise because the unit-cell vectors in the two-dimensional reciprocal space B i are not the lattice vectors of the three-dimensional reciprocal lattice. To obtain the crystal energy band structure in terms of a diperiodic specification it is necessary to represent the dispersion law E = En (k(3) ) in the form Ens (ks ) = En (ks + k⊥ − B n )

(11.5)

where ks is a projection of the three-dimensional wavevector k(3) onto the surface and k⊥ is its component perpendicular to the surface. The vector B n is assumed to be chosen so that the wavevector ks = k + B n takes values in the limits of BZ-2. In the projection of the energy bands of the three-dimensional crystal on the twodimensional Brillouin zone forbidden energy lacunas can appear. When the surface is taken into account, a band of surface states appears inside the energy lacuna. These surface states are analogous to the local energy levels of point defects that appear in the forbidden energy gap of a perfect crystal. The energy levels of surface states may arise in the continuous energy spectrum of a bulk three-dimensional perfect crystal. These are the so-called resonance surface states. They are analogous to the point defect states in the spectrum of bulk-crystal states. In the next sections we describe the slab models of the surface and illustrate the choice of the slab by examples of metal oxides with sodium chloride, rutile and cubic perovskite structures.

466

11 Surface Modeling in LCAO Calculations of Metal Oxides

11.1.2 Oxide-surface Types and Stability Oxides are very common in nature and play a fundamental role in corrosion, friction, electronic devices and superconductivity. The study of the properties of oxide surfaces has an interdisciplinary nature, being included in several fields of research – not only solid-state chemistry and physics, but also electrochemistry, catalysis, electronics and even geophysics and geology. Nowadays, nanostructured surfaces are used as substrates for growing artificial structures, for example, to make quantum wires or size-controlled clusters. The present understanding of oxide surfaces in the light of experimental and theoretical studies is summarized in books and review articles, see for example, [766–768]. Computer simulation plays an important role in the surface study and in recent decades has become an important tool for investigations of structural, electronic and catalytic properties of surfaces. Computer simulation of surfaces is based on two key issues – model of the surface and the Hamiltonian used for the chosen model. Methodological developments and the rapid improvement of computer hardware have enabled theorists to work with systems of increasing complexity and apply ab-initio (HF, DFT and hybrid) Hamiltonians in the surface calculations. Thereby, it is possible not only to reproduce experimental findings with increasing accuracy, but it is also possible to help in the prediction and interpretation of experimental results. As for models there were already mentioned both finite (molecular cluster and cyclic cluster), and infinite (semi-infinite crystal and slab) models. The model of a semiinfinite crystal is the most appropriate, because it takes into account an infinite number of atoms in the crystal below the surface. Slab and cluster models are, nevertheless, more popular, since they are more feasible from the computational point of view. The cyclic-cluster model is intermediate between the slab and molecular-cluster models. It takes into account the translational symmetry of the surface but considers only a finite number of interatomic interactions within a strictly defined region [320, 770]. The surface modeling is connected with the basic concepts, introduced by Tasker [772] in a discussion of the stability of surfaces of ionic or partly ionic crystals. According to classical electrostatic criteria, the stability of a compound surface depends on the characteristics of the charge distribution in the structural unit that repeats itself in the direction perpendicular to the surface. The surface can be studied by considering the crystal as a stack of atomic planes. Each plane consists of sublattices of nonequivalent atoms, a sum over each sublattice on each plane gives the total electrostatic potential. For perpendicular distances z greater than a few interionic spacings, the contribution from a planar sublattice reduces to the particularly simple form V (z) =

2π qz S

(11.6)

where S is the area of the unit cell in the plane and q is the planar sublattice charge. This expression is identical to the potential due to an infinite charged plane of charge density ρ = Sq ; the field E = 2π S q due to the charged plane is constant. Since V (z) and E do not diminish with increasing distance z the electrostatic sum must be over the whole crystal as stacks of planes unless cancellation of these terms occurs. Although the potential V (z) becomes infinite at infinite distances from the plane, it should be noted that when the crystal is constructed as a neutral block the infinities cancel and the potential becomes constant at large distances. In fact, it becomes zero in all

11.1 Diperiodic Space Groups and Slab Models of Surfaces

467

cases except where there is a dipole moment perpendicular to the surface. Similarly the field E cancels to zero outside a neutral crystal block, irrespective of the stacking sequence. The repeat unit of a stack of planes is introduced when analyzing the distribution of the bulk structure atoms over the atomic planes in the direction z normal to the surface. This distribution depends on the oxide bulk structure and Miller index, defining the surface. The three different possible stacking sequences define three types of surfaces. As a simplest case of the type-1 surface we consider the (001) surface of MgO crystal (Fig. 11.2).

Fig. 11.2. Stacking of atomic planes for MgO surfaces

The neutral bulk unit cell consists of two atoms (Mg and O) and both of them occupy the same atomic plane. Each atomic plane has overall zero charge since it consists of both anions and cations in stoichiometric ratio. The potential V (z) cancels on each plane since the contributions of the sublattices are equal and opposite. Additional planes in the surface of the crystal make no contribution to the energy of ions in the bulk of crystal, and the lattice sums required for the Madelung energy at any ion site need include only a few planes either side of that site. It is seen from Fig. 11.2, that the (110) surface of MgO crystal refers also to type 1. When a stacking sequence consists of charged planes, there are two possible cases. In the first case the repeat unit has no dipolar moment perpendicular to the surface (type-2 surface), in the second case the stack of charged planes has a nonzero dipole moment along the z-direction (type-3 surface). For the type-2 surface each plane contributes a term in the potential V (z), but a sum over the planes in repeat units cancels the potential to zero. Addition of extra neutral repeat units at the type-2 surface of the crystal cannot therefore affect the energy of ions in the bulk, and again the Madelung sums for the potential at any ion

468

11 Surface Modeling in LCAO Calculations of Metal Oxides

site are rapidly convergent. The (110) surface of the TiO2 rutile structure (Fig. 11.3) is an example of a type-2 surface.

Fig. 11.3. Stacking of atomic planes for rutile TiO2 surfaces

Indeed, the bulk crystal unit Ti2 O4 atoms are distributed over three planes with the surface unit cells consisting of one oxygen atom (two planes) or Ti2 O2 units (one plane). The atomic planes in this repeating unit are charged (q = −2 for oxygen planes and q = +4 for Ti2 O2 planes). However, the stacking of planes with the repeat unit as O–Ti2 O2 –O allows one to obtain zero as its dipole moment along the z-direction. Two other terminations (O–O–Ti2 O2 and Ti2 O2 –O–O) give the repeat unit that bears a nonzero dipole moment. This example demonstrates that the surface orientation only is not always sufficient to refer the surface to the one of three types, especially when various terminations may be produced. The atomic TiO2 planes in the repeat unit of the (001) surface of rutile (Fig. 11.3) are also charged (q = −2), but the dipole moment of any stack of an integer number of such planes is again zero (type-2 surface). The repeat units for (100) and (101) type-2 surfaces have also zero dipole moment (O- and O2 -terminated repeat units of 6 and 3 atomic planes, respectively, can be chosen). For the majority of cases of the oxide surfaces the stacking sequence of charged planes has a dipole moment perpendicular to the surface. In particular, the stacks of

11.1 Diperiodic Space Groups and Slab Models of Surfaces

469

alternately charged planes form the repeat unit for (111) surface of MgO (Fig. 11.2), (101) surface of TiO2 (Fig. 11.3). Table 11.3 gives the formal plane charges in the stack of different surfaces in the cubic perovskite ABO3 crystal with one formula unit in the primitive unit cell. The bulk atoms distribution over atomic planes is shown on Fig. 11.4. Table 11.3. Formal and calculated (in brackets) atomic planes charges of ABO3 cubic perovskite Surface (001) Termination AO BO2 AI BV O3 (KNbO3 ) –1 +1 AII BIV O3 (SrTiO3) 0(+0.27) 0(–0.27) AIII BIII O3 (LaMnO3) +1(+0.95) –1(–0.95)

(110) ABO O2 +4 –4 +4 –4 +4 –4

(111) AO3 B –5 +5 –4 +4 –3 +3

Fig. 11.4. Stacking of atomic planes for cubic perovskite ABO3 surfaces

All the surfaces in cubic perovskite structure are type-3 surfaces being stacks of alternately charged planes. It is less obvious in the case of the (001) surface in AII BIV O3 as the repeat unit consists of neutral atomic planes (see below). It is also seen that the charge of the atomic plane depends both on the oxidation states of A and B atoms (the sum of oxidation states is in all cases 6) and Miller indexes of the surface. For the stacking sequence of alternately charged planes (producing a dipole moment perpendicular to the surface) the two-plane repeat unit produces a potential at large distances whose magnitude is given by a V = 2π|q| (11.7) S where a is the interplanar spacing. Addition of an extra neutral repeat unit of two planes on the surface of the crystal will affect the energy of ions an infinite distance

470

11 Surface Modeling in LCAO Calculations of Metal Oxides

below the surface. Consequently, the Madelung sum cannot be truncated and must include contributions from every plane out to the surface. The potential at any ion site never reaches a constant bulk value, the energy of a neutral pair of ions never reaches the usual cohesion energy and the surface energy is infinite [772]. The stacking of planes for rutile (100), (101) and (111) type-3 surfaces is more complicated as it can not be named as the stacking sequence of alternatively charged planes. The classification of the surfaces by Tasker is based on the formal ionicities (oxidation states) of metal atoms. As we already noted, the oxidation state and calculated atomic charges are close only in purely ionic compounds (MgO, for example). As we have seen in Chap. 9, the transition-metal atoms charges differ essentially from the oxidation states due to the covalence part of the chemical bonding with oxygen atom. In Table 11.3 are given in brackets the atomic planes charges for (001) surface in SrTiO3 and LaMnO3 crystals calculated for the bulk crystals with the use of Wanniertype atomic functions in the population analysis, see Chap. 9 and reference [736]. As the Ti–O bond in SrTiO3 presents a non-negligible part of covalent character the actual charges of atomic planes SrO and TiO2 are nonzero. This means that SrTiO3 (001) should be considered as a polar (type-3) surface. Type-1 or -2 surfaces have a zero dipole moment in their repeat unit and are thus potentially stable. By contrast, polar type-3 surfaces have a diverging electrostatic surface energy due to the presence of a nonzero dipole moment not only on the outer layers, but on all the repeat units throughout the material, [768]. An electrostatic instability of type-3 surfaces results from the presence of that macroscopic dipole. Type-3 surfaces can be stabilized when the macroscopic field is removed by surface reconstruction, absorption of charged specks and so on. The modification of the surface electronic structure due to the reconstruction introduces compensating charges in the outer planes, stabilizing the surface structure. The absorption of charged specks is also a very effective mechanism to achieve the stabilization of polar orientations. Indeed, polar orientations are generally much more reactive than cleavage planes [768]. The classification of surfaces considered above was introduced for ionic or semiionic metal oxides. In covalent solids, the creation of a surface requires cutting covalent bonds, which means that dangling bonds would be present at the surface. The saturation of dangling bonds by chemisorption is important, for example, in silicates. When a surface is cut out from the bulk, unstable Si–O radicals at the surface react readily with water to give a fully hydroxylated surface with hydrophilic character [568]. Tasker’s classification of surfaces allows some qualitative conclusions to be made about the surface stability. The quantitative calculations of the surface formation energy in slab models are considered in the next sections. 11.1.3 Single- and Periodic-slab Models of MgO and TiO2 Surfaces As was seen above in the slab model the surface plane is supposed to be fixed by its orientation (by the set of Miller indices) relative to the bulk structure and its symmetry elements. All the atoms of the bulk primitive unit cell are distributed within one or several atomic planes with the same 2D-translation periodicity, see Figures 11.2–11.4. Let these planes of atoms form a layer, being stoichiometric and neutral as by definition it contains all the atoms of the bulk primitive unit cell. Depending on the host-crystal structure the one-layer single slab can have zero (types1 and type-2 surfaces) or nonzero (type-3 surfaces) dipole moment along the normal

11.1 Diperiodic Space Groups and Slab Models of Surfaces

471

to the surface plane. To ensure the zero dipole moment in the type-3 surface modeling the nonstoichiometric slabs can be used. Figure 11.3 shows that for the type-3 (111) surface of rutile TiO2 structure O- or TiO2 -terminated layer of the smallest thickness consists of 5 atomic planes: O–Ti– O–TiO2 –O or TiO2 –O–Ti–O–TiO2 , respectively. For the cubic perovskite ABO3 (001) surface the nonstoichiometric slabs with AO or BO2 terminations can be introduced. Figure 11.4 shows a AO-terminated slab, consisting of 7 atomic planes – 4 AO planes and 3 BO2 planes. As is seen from Fig. 11.4, the slab termination is different for different surfaces. The symmetry of the single slab corresponds to one of 80 diperiodic (layer) space groups. Fig. 11.5 shows a 3-layer single-slab model of (001) surface of MgO crystal (each layer consists of one atomic plane). The symmetry group of this slab DG61 (P 4/mmm) belongs to a square system.

Fig. 11.5. 3-layer (3-plane) slab for MgO (001) surface

Figure 11.6 shows a 3-layer single slab of (110) rutile TiO2 . In this case each layer consists of 3 atomic planes. In particular, the upper layer includes an oxygen plane (O1 atoms), a Ti2 O2 plane (Ti1, Ti2, O2, O3 atoms) and an oxygen plane (O4 atoms). Oxygen atoms O5 belong to the next O–Ti2 O2 –O layer. The symmetry group of this slab is DG37 (P mmm). In the multislab model (periodically repeated slab) the 3D periodicity is restored: slab of n layers (nL-slab) is supposed to be periodically repeated along the normal to the surface (let the translation vector of a single slab be c). Figures 11.7 and 11.8 show the periodic 3-layer slabs, modeling MgO (001) and TiO2 (110) surfaces, respectively. 1 The corresponding space symmetry groups can be found from Table 11.1: G123(D4h ) 1 and G47(D2h ), for MgO and TiO2 3-layer slabs, respectively. In 3D-slab calculations the results depend not only on the number of layers in the slab (slab thickness), but also on the separation between periodically repeated

472

11 Surface Modeling in LCAO Calculations of Metal Oxides

Fig. 11.6. 3-layer (9-plane) slab for rutile TiO2 (110) surface

Fig. 11.7. Periodic slab model of (001) MgO surface

11.1 Diperiodic Space Groups and Slab Models of Surfaces

473

Fig. 11.8. Periodic slab model of rutile TiO2 (110) surface

slabs defined both by the slab thickness and the length of the translation vector along the normal to the surface. The interslab distance (vacuum gap) is equal to the difference between the length of translation vector c and the vertical distance between the top atoms of one slab and the nearest repeated one, i.e. the difference between the translation vector c and the single slab thickness (see Figures 11.7 and 11.8). The symmetry of the 3D-slab model is given by one of the 3D space groups G (see Table 11.1) and may depend on the slab thickness, i.e. number of layers in the slab and its termination. As is seen from Fig. 11.1, for MgO crystal (001) surface slabs of an odd number of atomic planes have inversion symmetry (relative to the central atomic plane) but slabs of an even number of atomic planes have no inversion symmetry. For the cubic perovskite ABO3 (001) surface the stoichiometric slabs (AO– BO2 –AO–BO2 –) consist of an even number of atomic planes and have no inversion symmetry. But the nonstoichiometric AO- or BO2 -terminated slabs have inversion symmetry relative to the central AO or BO2 planes, respectively. Note that the space-symmetry group of a periodic slab differs from the space group of the host crystal. As an example, we consider MgO crystal with symmetry of space group Oh5 . The single-slab model refers to a square lattice and has the symmetry of

474

11 Surface Modeling in LCAO Calculations of Metal Oxides

DG 61 (P 4/mmm) or DG 51( P 4mm) for slabs of odd and even number of planes, respectively (see Figures 11.2 and 11.5). As is seen from Table 11.1, the periodic slab 1 1 model in these cases has the symmetry of D4h (G123) or C4v (G99) space groups, respectively. One of the goals of slab-model studies is to investigate the dependence of the calculated surface energy on the dimensionality of the slab model and on the Hamiltonian applied. The surface energy Esn per unity of surface area for an n-layer slab is defined by the relation 1 Esn = lim (11.8) [E(n, W ) − nEb ] n,W →∞ 2S where E(n, W ) is the total energy in a 3D-slab calculation of an n-layer slab with the vacuum gap W and Eb is the total energy of primitive unit cell in a separate bulk calculation. In the 2D-slab model W is infinite, i.e. E(n, ∞) is the n-layer single slab energy E(n). In (11.8) S is the surface area per repeating 2D-unit cell, the factor 1/2 accounts for the existence of two limiting surfaces. Esn is the energy per unit area required to form the surface from the bulk, and it is intrinsically a positive quantity. The value of surface energy is very dependent not only on E(n, W ) but also on the bulk total energy Eb used in (11.8). In (11.8) total energies from 3D (E(n, W )) or 2D (E(n, ∞)) systems are used, creating a problem of equivalent accuracy in periodic codes for 3D and 2D systems. Boettger pointed out [773] that any difference between Eb and the change in E(n, w) with slab thickness will cause the calculated surface energy to diverge linearly with n. Thus, increasing the slab thickness must sooner or later lead to unacceptable results because the bulk energy from a separate calculation will never exactly equal the slope of the slab energy versus n, [774]. To avoid the divergence problem, it was suggested [773], for each slab thickness n, pick as the bulk energy Eb the differential increase in the slab total energy upon addition of one layer of material: 1 Esn = lim [E(n, W ) − n (E(n, W ) − E(n − 1, W ))] (11.9) n,W →∞ 2S In this expression, Eb has been replaced by (E(n, W ) − E(n − 1, W )). This relation has the merit of using only slab-related quantities, making no reference to separately calculated bulk energies. The surface formation-energy calculations impose two strong requirements to the accuracy of calculated energies: (1) numerical precision, and (2) computational consistency. While the first condition may be relatively easily satisfied by increasing the computational thresholds, the second one can lead to considerable problems due to inevitable approximations that are inherent to all quantum-mechanical computation techniques [679]. The surface modeling of real interest lies in a semi-infinite crystal i.e. the calculation of the surface energy limit when n and W tend to infinity. However, one could not a priori guarantee the convergence to definite limit in (11.8). So, the existence of such a limit is the obligatory condition for the possibility to obtain the correct value of Es using slab models. Use of different surface models (2D- and 3D-slabs) and basis sets in HF (LCAO) and DFT (PW) calculations makes it difficult to understand the origin of differences in calculated results that may be due both to the model applied and to the features of the calculation scheme chosen (basis set, integral approximations, Brillouin-zone sampling, and so on).

11.1 Diperiodic Space Groups and Slab Models of Surfaces

475

The first attempt to compare 2D- and 3D-slab models within the same calculation scheme was made in [775] for HF LCAO studies of the surface properties of BaTiO3 in the cubic perovskite structure. The authors of [775] concluded that results for periodic 3D-slabs are systematically affected by the interactions among repeated images, and possibly the fictitious field imposed by periodic boundary conditions. In the LCAO approximation (for HF, KS and hybrid HF-DFT Hamiltonians) the systems periodic in 2 (2D-slabs) and 3 dimensions (3D-crystals) can be treated on an equal footing. The LCAO package CRYSTAL [23] gives the unique possibility to compare results of 2D- and 3D-slab models when the LCAO basis set is used. Such a comparison was made in [776] for the (001) surface of MgO crystal and in [777] for the (110) surface of rutile TiO2 . We discuss here the results for MgO crystal. In [776] the experimental value 4.21 ˚ A of the f cc lattice constant for the bulk crystal was adopted in slab calculations. As was already noted, the square unit cell of one layer is stoichiometric as it consists of one Mg and one O atoms lying in one (001) plane (see Fig. 11.5). The calculations were made for single slabs of one to twenty atomic layers in a truncated-bulk geometry without relaxing the positions of atoms. The converged surface energy value was obtained for the single slab of 5 layers. The dependence of 3D-slab calculations results on the vacuum gap was investigated via calculating the 5-layer 3D-slabs with gaps up to 42 ˚ A. The symmetry of slabs depends both on the 2D or 3D periodicity and on the evenness of the number n of atomic layers. For 3-D slabs the tetragonal space groups G 123 (P 4/mmm) and G 99 (P 4mm) with tetragonal lattice constant a′ = a/2 = 2.977 ˚ A were used for odd and even n, respectively. The translation vector c was varied in the calculations. Table 11.4 shows the convergence of results for the single slab (2D) MgO (001) surface model depending on the slab thickness. Table 11.4. Convergence of results for the MgO (001) single slabs depending on the 2D slab thickness (Es – surface energy in J/m2 , EF – Fermi energy in H), [776] Number of layers, n 1 2 3 4 5 6 9 12 15 20

HF Es 1.4571 1.4689 1.4678 1.4678 1.4678 1.4678 1.4678 1.4678 1.4678 1.4678

EF –0.3293 –0.3397 –0.3403 –0.3407 –0.3409 –0.3410 –0.3413 –0.3414 –0.3415 –0.3415

DFT (default ABS) DFT (extra ABS) Es 1.5516 1.5766 1.5341 1.5630 1.5341 1.5554 1.5342 1.5460 1.5345 1.5417

EF –0.1035 –0.1082 –0.1217 –0.1140 –0.1204 –0.1157 –0.1193 –0.1171 –0.1188 –0.1175

Es 1.5506 1.5344 1.5335 1.5339 1.5336 1.5337 1.5337 1.5338 1.5338 1.5338

EF –0.1075 –0.1226 –0.1217 –0.1208 –0.1203 –0.1199 –0.1193 –0.1190 –0.1189 –0.1187

476

11 Surface Modeling in LCAO Calculations of Metal Oxides

To eliminate the results dependence on Brillouin-zone sampling the dense Monkhorst–Pack k-point mesh was used. For primitive unit cells the 12×12×12 and 12×12 special-point sets have been taken for bulk and slab calculations, respectively. In the case of 3D-slabs the number of points in the third k-direction depends on the chosen value of the c translation vector in direct space. The latter was chosen to provide a similar size in all directions of the corresponding cyclic model of the crystal (the crystal is composed of equidistant supercells). The increasing of the 3D unit cell in direct space for producing the 2D supercell was accompanied by the corresponding reduction in the k-points mesh in the reciprocal space. The same all-electron basis sets have been used both in HF and DFT calculations to allow the direct comparison of obtained energies. The choice of high precision tolerances for the Gaussian overlap criteria in truncation of Coulomb and exchange series ensured the high numerical accuracy required for the evaluation of the corresponding surface energy. In DFT calculations the exchange and correlation were treated in PWGGA approximation. In the CRYSTAL code the periodic DFT version in a basis of local Gaussian-type functions is implemented to avoid the numerical integration. This auxiliary basis set (ABS) is used for fitting the exchange-correlation potential. In DFT computations two types of ABS were used: (1) ABS1–even tempered basis set of 12 s-type Gaussian-type functions, and (2) the basis proposed with extra p, d, f , and g-functions ABS-2. Table 11.4 shows the fast convergence of 2D periodic results for surface energy with increasing number of layers. Three to five MgO layers are sufficient to obtain the converged values of the HF surface energy for unrelaxed slabs, in agreement with the results of other calculations, [778]. The convergence of the Fermi-level energy (highest-occupied one-electron energy level for the slab) is much slower. The limiting value seems to be reached just at n = 20. As seen from Table 11.4, the use of extended ABS2 (for the fitting of the exchange-correlation potential) proved to be necessary for obtaining the convergence of the surface energies. The DFT values of surface energy exhibit a similar fast convergence with the slab thickness as HF values, and the difference between HF and DFT surface energy does not exceed 5%. However, the initial part of Esn for n = 3 has a different sign of slope for these two methods. The DFT result, which corresponds to decreasing of Esn with n, seems to be more physically reliable. There is no large discrepancy between HF and DFT atomic charges, although the latter exhibit a slightly more covalent character [776]. The numerical value of Fermi energy EF may be used for approximate estimation (according to the Koopmans’ theorem) of the surface ionization potential that defines the adsorption energies. Due to the correlation effects the DFT Fermi energy EF differs essentially from that in HF calculations. Table 11.4 shows that EF is inside the valence band of a perfect crystal, i.e. the resonance surface states are predicted both in HF and DFT single-slab calculations. Taking into account the convergence of results obtained for 2D slabs, only the 5-layer 3D models have been calculated in [776]. The results are given in Table 11.5. Table 11.5 shows that the 3D-slab with vacuum gap 6–8 ˚ A gives the converged (001) surface energy of ionic MgO crystal. The DFT values of Esn exhibit a similar fast convergence as HF ones and the difference between them is small. The convergence of the surface energy with the single-slab thickness is slower for rutile TiO2 due to

11.1 Diperiodic Space Groups and Slab Models of Surfaces

477

Table 11.5. Convergence of the results for the periodically repeated 3D MgO (001) unrelaxed slab depending on the vacuum gap for 5-layer models (primitive 2D cell), [776], (Es – surface energy in J/m2 , EF – Fermi energy in a.u.) ˚ k-point Cell dimensions, A Gap C set ∞ ∞ 12 12 2.105 10.525 12 12 4 12.630 12 12 3 4.210 14.735 12 12 3 6.315 8.420 16.840 12 12 2 21.050 12 12 2 12.630 29.470 12 12 1 21.050 42.100 50.520 12 12 1

HF Es EF 1.468 –0.3409 5.365 –0.2458 1.503 –0.3181 1.468 –0.3215 1.468 –0.3239 1.468 –0.3273 1.468 –0.3312 1.468 –0.3352

DFT Es EF 1.532 –0.1202 4.8937 –0.0486 1.555 –0.1164 1.533 –0.1170 1.533 –0.1174 1.533 –0.1180 1.533 –0.1186 1.532 –0.1193

the partly covalent Ti–O interaction. Table 11.6 demonstrates the convergence of the surface energy in all–electron HF LCAO single-slab calculations [777] of the (110) surface of rutile TiO2 . Table 11.6. Convergence of the results for single-slab (2D) model of (110) rutile TiO2 surface, [777], (Es – surface energy, EF – Fermi energy) No. of atomic No. of Ti planes (layers) planes Perfect crystal – 3 9 15 5 7 21 9 27

Total energy (a.u) –1996.8016 –5990.211 –9983.815 –13977.418 –17971.021

Es (J/m2 ) – 2.193 2.183 2.183 2.183

EF (a.u) –0.3077 –0.4171 –0.4235 –0.4237 –0.4237

It follows from Table 11.6 that surface energy is sufficiently well reproduced for the 5 layers (15 atomic planes) slab, in accordance with the results of HF all–electron calculations [779]). As in the case of MgO crystal the convergence of the Fermi energy with slab thickness is much slower than that of surface energy (see the last column of Table 11.6). Calculations of 3D-slabs for rutile √ TiO2 [777]√show that the periodic supercells in the plane with extensions 2c × 2a 2 and 2c × a 2 give the same surface energies for the vacuum gap values 41 ˚ A and 15 ˚ A , respectively. The LCAO approximation allows comparison of the electron-charge distribution in the bulk crystal and on the surface. The application of Wannier functions for this comparison can be found in [781], where the Boys localization criteria was applied and only the valence-band states were included for WFs generation (for bulk crystals such an approach is discussed in Chap. 9). As was seen in Chap. 9 for bulk crystals, the population analysis using Wannier-type atomic orbitals (WTAO) gives more adequate

478

11 Surface Modeling in LCAO Calculations of Metal Oxides

results for charge distribution than traditional Mulliken population analysis or the projection techniques applied in PW calculations. The WTAOs for systems with 2D periodicity were generated in [780] for the first time and used for the surface charge distribution analysis in a single-slab model of (001)MgO and (110)TiO2 . First, WFs of the bulk crystal, corresponding to valence bands, were used as a tool allowing one to estimate the values for the slab parameters needed to adequately model the surface electronic structure. Secondly, a minimal valence basis of WTAOs, which are the Wannier functions, generated from occupied and vacant Bloch states and centered on atoms, were used for the analysis of chemical bonding at the surfaces under study. HF LCAO calculations were performed for 3layer single slabs of (001)MgO (3 atomic planes) and rutile (110) TiO2 (9 atomic planes), see Figures 11.5 and 11.6. For construction of the WTAOs for the minimal valence basis, the corresponding energy bands are to be chosen. The s- and p-bands of oxygen atoms form the higher valence bands in both slabs considered. In the case of the TiO2 slab, the d-bands of the titanium atoms are the lower conduction bands, while the s-bands of the metal atoms in both slabs are located among vacant states high in energy. The latter makes the contribution of s-WTAOs of the metal atoms into the covalence of these atoms negligible. One can estimate the slab thickness needed for surface modeling by a preliminary qualitative analysis of the behavior of WFs, corresponding to valence bands of a bulk crystal. Indeed, the offdiagonal elements of the density matrix of a bulk crystal fall off with distance as the Wannier functions of valence bands or faster (exponentially in the case of insulators), see Chap. 4. Thus, beyond a sufficiently large domain of the crystal (basic domain) the values of Wannier functions, assigned to the central unit cell of the domain, are negligible. Consequently, truncation of the rest of the crystal and imposition of the periodical boundary conditions on the domain-edge atoms, practically do not affect the electron-density distribution inside the domain chosen. The basic domain of the crystal corresponds to a special set of k-points, which provides a convergence of the calculation results relative to the extension of this set. A similar ideology can be used for the slab model. Let us consider the slab as consisting of the finite number of atomic planes. Let, at the surface planes of the slab chosen, the numerical values of bulk valence-band WFs be close to zero. The corresponding number of atomic planes determines the minimal thickness of a slab for the studied surface, which can be expected to provide the convergence of the results relative to increasing its thickness. However, the convergence might not occur for the chosen thickness of the slab due to an absence of periodical boundary conditions at the slab surface. But, if the slab WFs, localized in its central part, are close to the bulk ones and the localization of the slab WFs, centered near the slab edge, is to a certain extent the same as in the bulk crystal, the electron density in the middle part of the slab do not differ much from the bulk electron density, and would not change when the thickness of the slab is increased. Thus, the analysis of bulk WFs can help in estimating the slab thickness, which allows the bulk-like results in the central planes of the slab to be obtained and thus corresponds to more or less adequate surface modeling. Still, this is only a qualitative and estimative analysis. Let us illustrate the aforesaid by the results obtained for MgO and TiO2 crystals. In [780] it is shown that Wannier functions for the valence bands of the bulk MgO

11.1 Diperiodic Space Groups and Slab Models of Surfaces

479

crystal calculated along the [001] direction are practically completely localized inside a domain containing just three (001) atomic planes. Furthermore, according to calculations the difference between these WFs and the WFs generated for the slab and centered on the plane 2 (see Fig. 11.5), is negligible. This means that the 3-plane slab is sufficient for modeling the (001)-surface properties of MgO. As we demonstrated above, this consideration is, in principal, confirmed by thorough calculations of MgO slabs with a varied thickness – the surface energy and other characteristics converge at the 3-plane slab. In the case of TiO2 the bulk WFs does not fit into the 9 atomic planes shown in Fig. 11.6. As a result, the WFs, calculated from the slab states and localized in the “central” region of the slab, are different from the corresponding bulk WFs. Consequently, 9 planes are not sufficient for correct modeling of the TiO2 crystalline surface. This result correlates with the results given in Table 11.6. As seen from Table 11.7A the values of atomic charges for the MgO slab correspond to the purely ionic type of chemical bonding both at the surface and inside the slab. The charges in the slab model practically coincide with the bulk ones. The results, obtained by the WTAOs method and according to the traditional Mulliken and L¨ owdin schemes, are nearly the same. Table 11.7. Atomic charges for the single MgO 3-plane (001)-surface and TiO2 9-plane (110) surface slabs and bulk crystals, [780], (NWTAO is nonorthogonal WTAO, OWTAO is orthogonal WTAO) A) MgO crystal Atoms

Atomic charges, |e| NWTAOs OWTAOs Mulliken O1, Surface –1.98 –1.96 –1.96 2.00 1.97 1.96 Mg1, Surface –1.99 –1.96 –1.97 O2 Mg2 1.97 1.95 1.97 –2.00 –1.98 –1.98 O Bulk

L¨ owdin –1.83 1.83 –1.82 1.82 –1.82

B) TiO2 crystal Planes

Atoms

Atomic charges, |e| NWTAOs OWTAOs Mulliken 1 O1, surface –1.33 –1.30 –1.13 2 Ti1, surface 2.99 2.87 2.62 Ti2 2.86 2.79 2.54 O2,3, surface –1.48 –1.44 –1.35 3 O4 –1.57 –1.51 –1.38 4 O5 –1.54 –1.45 –1.28 5 Ti3 3.06 2.95 2.66 Ti4 3.01 2.93 2.65 O6,7 –1.50 –1.46 –1.33 Bulk Ti 2.76 2.70 2.66 O –1.38 –1.35 –1.33

L¨ owdin –0.88 1.84 1.63 –0.86 –0.91 –0.82 1.72 1.73 –0.87 1.72 –0.86

480

11 Surface Modeling in LCAO Calculations of Metal Oxides

For the TiO2 slab the Mulliken and L¨ owdin population analyses give contradictory results. Particularly, as noted in Table 11.7B, the values of atomic charges at the surface planes of the slab, calculated according to the Mulliken scheme, are smaller in magnitude than those inside the slab. This corresponds to a lower ionicity at the crystalline surface compared to the bulk. An opposite tendency is demonstrated in the L¨owdin analysis, where the surface charges are larger or the same as in the bulk. Besides, the absolute values of the charges obtained according to the two traditional schemes are quite different from each other. Table 11.7B shows that the analysis performed by the orthogonal and nonorthogonal WTAOs gives approximately the same results. They show the tendency of decreasing the ionicity level at the surface, which is similar to the results of the traditional Mulliken analysis. Let us consider the values of atomic charges, obtained for the central planes of the slab (planes 3–7 on Fig. 11.6). Due to the symmetry of the slab the planes 6 and 7 are equivalent to the planes 4 and 3, respectively. As noted above, a nine-plane slab is not sufficient to model the TiO2 surface, as the electron density at the central planes of the slab is different from that of the bulk crystal. However, the values of atomic charges calculated according to both the Mulliken and L¨ owdin schemes practically coincide with the bulk ones (Table 11.7B). In contrast to these results, the population analysis based on WTAOs reproduces this slab-bulk misfit: the values for the charges of atoms of the inner planes in the slab and the bulk crystal differ noticeably. When analyzing the Ti–O bond orders, which are given in Table 11.8, one can conclude the following. The values, obtained by the two traditional schemes, can be hardly interpreted. Some of the bonds have the same orders in both schemes (Ti1–O5, Ti2–O1, Ti3–O4, Ti4–O5), while the others are essentially different (Ti1–O2, Ti2–O2, Ti3–O6, Ti4–O6), see Fig. 11.6. As to the results obtained by orthogonal and nonorthogonal WTAOs, they are close for all the bonds under consideration. Every oxygen atom (excluding the atoms O1) has two neighboring titanium atoms at a distance of 3.687 a.u. and one at 3.727 a.u. (three-coordinated atoms). The O1 atoms are two-coordinated and have the neighbors only at 3.687 a.u. The titanium atoms are six-coordinated (Ti2, Ti3, Ti4) or five-coordinated (Ti1) and have four neighboring oxygen atoms at 3.687 a.u. and two or one – at 3.727 a.u., respectively. Only for some of the atoms (Ti2, O2, Ti4) do the Mulliken and L¨ owdin schemes allow the larger orders for the shorter bonds (among the nearest-neighbor Ti-O bonds) to be obtained. For other atoms the values of the shorter bonds orders are approximately of the same magnitude as the longer ones (O6) or even significantly smaller (Ti3, O4, O5), which is unreal from the chemical point of view. The WTAOs method for all the atoms gives the expected tendency - the shorter is a bond, the larger is the value of the corresponding bond order. Also, WTAOs analysis gives the noticeably larger values for the insurface bonds. This agrees with the decreased values of the atomic charges at the surface relative to those at the inner part of the slab. The results of the calculations of atomic covalences are presented in Table 11.9. Again, the Mulliken and L¨ owdin methods demonstrate contradictory and obscure bulk–surface tendencies. For some atoms the values of the covalences, calculated according to the Mulliken scheme are close to the L¨ owdin ones, for the other they differ significantly. Thus, these coincidences of the Mulliken and L¨ owdin results can be regarded as casual. And since the nine-plane slab does not provide the bulk-like electron

11.1 Diperiodic Space Groups and Slab Models of Surfaces

481

Table 11.8. Orders of the bonds between the near-neighbour Ti and O atoms in the single TiO2 nine-plane (110)-surface slab and bulk crystal (NWTAO is nonorthogonal WTAO, OWTAO is orthogonal WTAO, d is a distance between neighbor atoms, s denotes in-surface atom), [780]. Atom Neighbor atoms Bond orders Atom N d NWTAO OWTAO Mulliken L¨ owdin O1 Ti2, s 2 3.687 0.54 0.55 0.80 0.79 0.39 0.42 0.62 Ti1 O2,3, s 4 3.687 0.37 O5 1 3.727 0.17 0.25 0.62 0.63 Ti2 O1, s 2 3.687 0.54 0.55 0.80 0.79 O4 2 3.687 0.27 0.29 0.47 0.50 O2,3 2 3.727 0.11 0.13 0.17 0.40 O2,3 Ti1, s 2 3.687 0.37 0.39 0.42 0.62 Ti2 1 3.727 0.11 0.13 0.17 0.40 O4 Ti2 2 3.687 0.27 0.29 0.47 0.50 Ti3 1 3.727 0.17 0.21 0.52 0.54 O5 Ti4 2 3.687 0.30 0.32 0.52 0.54 Ti1 1 3.727 0.17 0.25 0.62 0.63 Ti3 O6,7 4 3.687 0.31 0.32 0.34 0.54 O4 2 3.727 0.17 0.21 0.52 0.54 Ti4 O5 4 3.687 0.30 0.32 0.52 0.54 O6,7 2 3.727 0.22 0.23 0.34 0.53 O6,7 Ti3 2 3.687 0.31 0.32 0.34 0.54 Ti4 1 3.727 0.22 0.23 0.34 0.53

Table 11.9. Atomic covalences for the single TiO2 nine-plane (110)-surface slab and bulk crystal, [780], (NWTAO is nonorthogonal WTAO, OWTAO is orthogonal WTAO) Planes

Atoms

Atomic covalences NWTAOs OWTAOs Mulliken L¨ owdin 1 O1, surface 1.20 1.24 1.86 1.88 2 Ti1, surface 1.74 1.91 2.44 3.35 Ti2 1.92 2.03 2.36 3.02 O2,3, surface 0.95 1.02 1.28 2.01 O4 0.80 0.90 1.76 1.95 3 O5 0.85 0.99 1.92 2.07 4 5 Ti3 1.64 1.82 2.49 3.47 Ti4 1.73 1.85 2.87 3.45 O6,7 0.92 0.99 1.27 2.03 Ti 2.06 2.16 2.15 3.46 Bulk O 1.11 1.17 1.24 2.04

482

11 Surface Modeling in LCAO Calculations of Metal Oxides

density in the middle of the slab, the correspondence between the values for the covalences of the bulk and slab atoms, obtained by the traditional population analysis schemes, also cannot be considered as reliable. The WTAOs method, in its turn, allows one to obtain the values of atomic covalences in the slab, which can be physically interpreted. First, the values calculated with the orthogonal and nonorthogonal WTAOs are alike. Secondly, the inslab atoms have a covalence different from the bulk one. This result can be expected due to an insufficient thickness of the nine-plane slab for the TiO2 (110) surface modeling. And last but not least, the results of the WTAOs population analysis clearly show the increase of the covalence at the surface of the slab when compared to the inslab values. The surface atom O1 has the maximal covalence among all the oxygen atoms of the slab. This effect is even sharper if it is remembered that this atom is only twocoordinated, while the others are three-coordinated. The large value of the covalence is also observed for the surface atoms O2/O3, but it is not as pronounced as for the atom O1. The atom Ti1, which can be regarded as a surface atom, has a smaller covalence than the atom Ti2, but taking into account that the former is only fivecoordinated, one can conclude that the effect of higher covalence at the surface is valid for this atom as well. The values of local characteristics of the slab electronic structure, differing from the bulk one, may indicate the possibility of significant structural relaxation of the studied TiO2 slab. This relaxation would involve insurface and intraslab atoms, since the TiO2 nine-plane slab at its inner planes does not reproduce the bulk electronic structure. Taking into account the results of the WTAO population analysis, one can assume that the atoms would shift so that the length of the bonds would increase or decrease to compensate the excessive or deficient values of the covalence, respectively. These considerations correlate with the studies of the geometry optimization in TiO2 slabs [782].

11.2 Surface LCAO Calculations on TiO2 and SnO2 11.2.1 Cluster Models of (110) TiO2 Titanium dioxide (in rutile and anatase structures) is the most investigated crystalline system in the surface science of metal oxides. The review article [783] summarizes the results of experimental and theoretical studies of titanium dioxide (bulk and surface) made up to 2002 inclusive. The information about calculations of the surface reconstruction, surface defects and growth of metals on TiO2 is also included. The results of the later theoretical studies of rutile surfaces can be found in [784–795] and references therein. In the majority of the calculations the slab model was used for the study of periodic surface structures. Here, we consider the molecular- and cyclic-cluster models of (110) TiO2 , following [770], where the connection between the slab and cluster models was considered by performing a symmetry analysis of the crystalline surface. The cyclic-cluster (CC) model of the surface is connected to the slab-2D-supercell approach, but it is different due to the different introduction of cyclic boundary conditions (CBC). In the slab-supercell approach, these conditions are, in fact, introduced for a very large system, e.g., for the main region of the 2D periodic plane lattice, so

11.2 Surface LCAO Calculations on TiO2 and SnO2

483

that band-theory methods can be used in the slab calculations. In the CC model, the CBC are introduced for the cluster itself, so that the model turns out to be finite. The convergence of the results to the slab values must be investigated by increasing the CC. However, the CC approach offers evident advantages: (a) the spurious boundary effects of molecular clusters are absent; (b) the periodicity of adsorbed species or of defects is excluded because the CC is a finite system; (c) there is a one-to-one symmetry correspondence between the electronic states of the 2D CC and the band states of the corresponding slab model. The CC model was applied in semiempirical calculations [796] of the adsorption geometry for organic adsorbates on a rutile (110) surface. The INDO parametrization scheme was modified to reproduce the experimental results for geometries of carbonand nitrogen-containing molecules. The CC representing the rutile (110) surface consists of 120 atoms. It includes two layers of 5 × 2 2D unit cells with six atoms in each 2D unit cell. It is seen from Fig. 11.6, that 2D primitive unit cells form a plane rectangular lattice with parameters c and a (a, c are the tetragonal lattice parameters of the bulk crystal). The molecular-cluster (MC) model is extremely popular in surface simulations because of its simplicity and flexibility and the possibility of its use in the standard techniques of molecular quantum chemistry [320, 769]. It is also possible to study defects or adsorption reactions in the limit of low coverage. In the MC approach, a crystal with a surface is modeled by a finite (molecular) system consisting of atoms on the surface and of some atomic planes nearest to it. The 2D periodicity of the surface is disregarded so that the symmetry of such a model is described by one of the crystallographic point groups. In adsorption studies, the adsorbed species are included in the cluster-adsorbate systems. An MC is cut out of the slab to simulate a portion of the surface so that spurious effects arise that are related to the limited cluster size and to the presence of the boundary. To eliminate these effects, the dangling bonds are saturated either by hydrogen atoms or pseudoatoms or the whole cluster is placed in an external field simulating the influence of the bulk crystal [769]. In the MC model, the results critically depend on the choice of the cluster size, stoichiometry, and shape. Nevertheless, the MC model can provide useful information if the cluster is properly chosen and the influence of its size is investigated. A number of general rules were suggested in [770, 771] for the generation of an MC suitable for surface simulations based on the connection between the MC and the slab model. These rules have been intuitively applied in different studies, in most cases without explicitly considering the relationship between periodic and molecular models. The following rules allow artefacts of MC surface models to be minimized: (a) the clusters correctly reflect the stoichiometry of the bulk crystal and are electroneutral; (b) atoms on the crystal surface should be equivalent to those on the cluster surface except for corners and edges; (c) the average coordination of all cluster atoms is as close as possible to that of atoms on the crystal surface; (d) as many symmetry elements of the crystal surface as possible are retained in the cluster; and (e) an extension to rule (a) is that each layer of the cluster should have the stoichiometry of the crystal. In fact, such principles of the MC choice ensure the simulation of the crystal surface as closely as possible and are directly connected with the 2D periodic slab model. By using 2D unit cells as basic units of the model clusters, it is possible to increase the cluster size in a systematic way and, thereby, to study the convergence behavior

484

11 Surface Modeling in LCAO Calculations of Metal Oxides

of calculated surface properties. As examples of MC model applications to surface studies using some of the above-mentioned rules, calculations of MgO, TiO2 (rutile, anatase structures), and Cr2 O3 (corundum structure) surfaces and adsorption of small molecules on them can be considered, see [770] and references therein. However, it is also possible to find examples in the literature where these rules have not been applied and, in part, unphysical results were obtained. In MgO and NaCl crystals, the MCs were chosen [797] so that they simulated the 2D supercell of the surface and included several layers of the bulk crystal. For these crystals, the stoichiometry of the chosen MC was ensured by this choice. For more complicated systems, e.g., TiO2 structures, the stoichiometry of the MC is only ensured when several additional oxygen atoms are added. There are two principle ways to add these additional atoms. They can be placed on the regular surface around the cluster. This is denoted as type A in Figures 11.9 and 11.10. In some cases, this procedure leads to clusters that do not correspond to rules (d) and (e). Another possibility is to place the additional atoms for saturation at irregular positions of the crystalline lattice so that rules (d) and (e) will be fulfilled. Examples of this second type (B) of cluster generation are presented in Figures 11.9 and 11.10. If all layers of a multilayer cluster have the same stoichiometry, artificial polarization, which can affect the calculated surface properties, is reduced. To study the effect of the distribution of saturation atoms on the calculated properties of crystalline surfaces, the rutile (110) surface has been selected for the MSINDO calculations [770]. The water adsorbtion in the molecular and dissociated form was modeled on clusters of Ti5 O10 , Ti9 O18 , Ti14 O28 , and Ti18 O36 (Fig. 11.9) chosen according to the rules given above. Nevertheless, even if these rules are applied, several different types of clusters can be constructed. Two types of possible cluster models were used. In typeA clusters additional oxygen atoms, necessary to ensure total stoichiometry (shaded in Fig. 11.9), were placed at regular lattice positions. In type-B clusters additional oxygen atoms were placed at nonlattice positions to maximize the symmetry of the clusters and to reduce polarization, as discussed in the previous section. Table 11.10. MSINDO adsorption energies (kJ/mol) for water adsorption on rutile (110) (relaxed cluster calculations), [770] Cluster Ti5 O10 Ti9 O18 Ti14 O28 Ti18 O36 Ti49 O98

Type A Type B molecular dissociative molecular dissociative 51 39 70 201 139 –24 94 107 66 8 92 143 157 192 129 162 120 151 119 157

The adsorption energies calculated with these small cluster models are presented in Table 11.10. The geometries of the clusters were optimized within the symmetry of the rutile structure. In model B, there are one or two more degrees of freedom for oxygen atoms in nonlattice positions.

11.2 Surface LCAO Calculations on TiO2 and SnO2

485

Fig. 11.9. Rutile (110) surface of size 1 × 1: 1–4 layer clusters of types A and B, [770]. Black, white and shaded spheres label Ti, O and additional O atoms.

486

11 Surface Modeling in LCAO Calculations of Metal Oxides

Fig. 11.10. Rutile (110) surfaces of size 3 × 1, 3 × 3 and 5 × 3: two-layer clusters of types A and B, [770]. The labels of atoms are the same as in Fig. 11.9.

For the cluster–water systems, the Cartesian coordinates of all water atoms, the two surface atoms close to the oxygen atom, and the hydrogen atom of water are optimized. The adsorption energy is calculated as the difference in the total energies of the TiO2 cluster and the cluster+H2 O system. Therefore, positive values indicate stabilization. A comparison is made with the results of the calculations on a much larger cluster, Ti49 O98 (Fig. 11.10), which is a better representation of the surface. From Table 11.10, it can be seen that the different distribution of additional oxygen atoms in clusters A and B has a substantial influence on the calculated adsorption energies. The variation of adsorption energy with an increasing number of layers is significantly reduced if model B is considered. Even for rather small systems, the adsorption energies are relatively close to that of the largest cluster, Ti49 O98 . The most important difference between the two models is that only for model B is the dissociative adsorption always more stable than that of the molecular form. The relative stability of the two forms of water on the rutile (110) surface is still a matter of debate (see the next section). At the moment, we only focus on the convergence of results obtained for clusters with increasing sizes. A comparison of models A and B of the largest cluster (Ti49 O98 ) shows that the influence of additional atoms is negligible due to their large distance from the adsorption position. This indicates that, in this case, it is the description of the local environment near the adsorption site rather than the effect of the global polarization of the cluster that is responsible for the differences observed for the smaller clusters. Thus, the numerical results for the adsorption behavior of rutile (110) towards water with different clusters demonstrate that convergence to the methodological limit is significantly improved if the criteria mentioned above are taken into account. Since the underlying considerations are of a general nature, they can also be applied to cluster models of surfaces in other systems. In any case, only the comparison of the results of both slab and cluster models application allow those results of calcu-

11.2 Surface LCAO Calculations on TiO2 and SnO2

487

lations that can be taken as confident to be extracted. In the next section we consider this point returning to the water adsorption on the (110) surface of rutile. 11.2.2 Adsorption of Water on the TiO2 (Rutile) (110) Surface: Comparison of Periodic LCAO-PW and Embedded-cluster LCAO Calculations The adsorption of water on TiO2 surfaces has been extensively investigated using both experimental and theoretical methods, see [790] and references therein. Nevertheless, the adsorption of H2 O on the TiO2 (110) surface is still a matter of controversy. From experiments, it has been proposed that H2 O adsorbs mainly associatively and dissociates at defect sites, see [798] and references therein. If dissociation does occur, it is only at low coverages (< 15%) that may be associated with surface defects. In contrast, most DFT 3D periodic calculations with the plane-wave (PW) basis predict dissociation at all coverages or an equivalent amount of dissociative and associative mechanisms. In contrast, Hartree–Fock (HF) embedded-cluster calculations with an atomic (Gaussian) basis set [801] predict that the associative mechanism should be favored due to overestimation of H-bonding in the dissociated configuration by DFTPW studies. The first two-periodic all-electron HF LCAO calculations of the rutile relaxed surfaces, made in [779], gave atomic displacements of surface atoms that did not differ significantly from the later results of DFT-PW investigations. Further periodic LCAO studies of TiO2 bare surfaces have been made in [777, 799, 800]. For studies of H2 O adsorption on TiO2 the single-slab periodic HF-LCAO and DFT-LCAO methods were first applied in [790] and compared with PW-DFT results to test various methods with cyclic- and embedded-cluster calculations and resolve discrepancies between the methods. In the discussion of numerical results of this study we use the following labels for atoms of the (110)TiO2 shown on Fig. 11.6: Ti1, Ti2-Ti5f ,Ti6f (five- and sixfold coordinated titanium atoms), O1, O2-Obr , O3f (bridging and threefold coordinated oxygen atoms). Both in 2D (single-slab) LCAO and 3D (periodic-slab) PW calculations the same 3-layer (9 atomic planes) slab was used with the fixed positions of the middle-layer atoms. Both associative (molecular) and dissociative water monolayer adsorption has been investigated. DFT-PW calculations were performed on different H2 O−TiO2 structures to determine which one corresponds to the most stable arrangement on the rutile (110) surface. To this end, a 3D-supercell consisting of 1 × 1 or 2 × 1 surface unit cells was used to model the (110) surface geometry. The smallest surface unit√cell was chosen for bare-surface calculations, having dimensions of |c| (2.959 ˚ A) and 2|a| (6.497 ˚ A) in the (001) and (–110) directions, respectively, where a and c are translation vectors for the bulk rutile unit cell. This surface unit cell is doubled in the (001) direction for the hydroxylated or hydrated surfaces. The calculations were performed for 3-layer slabs with a total cell thickness ≈ 19 ˚ A, i.e. slab thickness + vacuum gap 10 ˚ A. A model with the fixed atomic positions of the central layer is assumed to be more appropriate to the real 2D surface relaxation because real crystals are not thin films and the bulk crystal structure probably exists a few atomic layers beneath the mineral

488

11 Surface Modeling in LCAO Calculations of Metal Oxides

surface. Use of the constrained central layer was also accompanied by imposition of the inversion symmetry. This symmetry saves computational time and minimizes any possible dipole moment of the slab. Adsorption was simulated with a pair of H2 O molecules (one at each side of the 3-layer TiO2 slab) using a 2 × 1 unit cell. The use of one H2 O molecule on each side allows a cell with inversion symmetry to be used and creates a system with zero dipole moment associated with the slab. In a PW study of water associative adsorption (with structure optimization) it was found that the lowest energy corresponds to the following structure: the water O is directly bonded to the five-coordinate Ti5f - atom, a single H-bond between an H in H2 O and a bridging oxygen atom (Obr ) and the torsion angle H − O − H · · · Obr 117◦ , see Fig. 11.11. In the structure with an angle of 180◦ all atoms of the water molecule and bridging oxygen are in the same plane, but this structure appears to be less favorable.

Fig. 11.11. Associative (molecular) adsorption at half-monolayer coverage

The dissociative adsorption of H2 O onto the (110) surface was modeled assuming that one H atom was bonded to the Obr next to the Ti atom with a terminal OH group. (Note that this Ti atom was originally 5-coordinated on the bare (110) surface.) Due to the half-monolayer configuration, the neighboring OH groups can be adsorbed either in a zigzag geometry or inline. In the latter case, there exists the possibility of Hbonding between neighboring bridging and terminal OH groups: Obr − H · · · Oter − H. Consequently, the inline configuration only was considered because this H-bonding should lower the adsorption energy. As in the case of molecular H2 O adsorption,

11.2 Surface LCAO Calculations on TiO2 and SnO2

489

there are two possible OH orientations: inplane, with torsion angle H − O · · · H − O equal to 180◦ (structure 1, Fig. 11.12) and a conformation with smaller torsion angle (structure 2, Fig. 11.13).

O ter Ti ter

Fig. 11.12. Dissociative adsorption, half-monolayer coverage: structure 1, view in (001) direction

Energy minimizations of the corresponding slabs led to similar adsorption energies for both structures, which were lower than the corresponding associative values for 1/2 monolayer coverage by ≈ 3–5 kcal/mol. Thus, these results are in accordance with previous DFT simulations for half-monolayer coverage that predict H2 O dissociation on the rutile (110) surface. A different conclusion was obtained from calculations on models corresponding to full-monolayer coverages. The distinct feature of these structures, in contrast to other cases, is the nearly equivalent displacements of the Ti and O atoms on the surface Ti layer such that they lie in one plane. Also, it is interesting to note that the overall arrangement of H and O atoms in the (110) surface is similar in both associative and dissociative adsorption. The obtained binding energies are stronger for associative adsorption on both the 3- and 5-layer slabs. This size of difference (3.6 kcal/H2 O molecule) in favor of associative adsorption was not obtained in previous DFT calculations. In Table 11.11, the adsorption energies, obtained in PW calculations, are compared with those obtained in LCAO HF and DFT calculations for the structures, optimized

490

11 Surface Modeling in LCAO Calculations of Metal Oxides

Fig. 11.13. Dissociative adsorption, half-monolayer coverage: structure 2, view in (1–10) direction

in PW DFT calculations. The computational details of both PW and LCAO calculations are given in [790]. In Table 11.12 n Ti-L designates the number of Ti planes in the slab model, DB ECP means Durand–Barthelat effective core potential for Ti atoms, [484]. As can be seen, the HF method using both all-electron and ECP bases gives the dissociative adsorption energies that are about 2 to 3 kcal/mole more favorable than those for associative adsorption. The DFT method results in the opposite picture: associative adsorption energies exceed the dissociative values by approximately 5 kcal/mole both for the 3 and 5 Ti-layer slabs. The basis-set superposition error was estimated for ECP 3 Ti-layer hydroxylated slabs and it appears to be 6.4 kcal/mole per water molecule. The TiO2 slabs with the dissociated and molecular form of H2 O have been calculated using exactly the same basis sets in all cases, so the large value of BSSE influences the absolute values of ∆E only, but not the relative energy of water dissociation on the TiO2 surface. Taking into account the value of BSSE, the absolute values of the obtained LCAO water-adsorption energies seem to lie in the interval of 25–35 kcal/mole that is slightly greater than the corresponding PW results. The z-shifts of positions of the surface atoms on TiO2 slabs obtained by LCAO methods are given in Table 11.12. The optimized geometry of a bare TiO2 surface and of hydroxylated (hydrated) slabs exhibits qualitatively the same relaxations in LCAO calculations as were found in PW calculations. But there are some quantitative differences between the results of the DFT-PW, DFT-LCAO, and HF-LCAO approximations. It appears that the

11.2 Surface LCAO Calculations on TiO2 and SnO2

491

Table 11.11. Calculated (without zero-point correction) at monolayer coverage and experimental adsorption energies (per one water molecule) for H2 O/TiO2 (110) (kcal/mol), [790]. Method

Molecular Dissociative adsorption adsorption –24.9 –23.0 –24.7 –22.7

PW:DFT-GGA-PW91, 340 eV; 3 Ti-L PW:DFT-GGA-PW91, 340 eV; 3 Ti-L (Monkhorst–Pack k-point set 3 3 1) PW:DFT-GGA-PW91, 1000 eV; 3 Ti-L –25.2 (Monkhorst–Pack k-point set 3 3 1) PW:DFT-GGA-PW91, 340 eV; 5 Ti-L –22.0 –18.9 PW:DFT-GGA-BP88, 1000 eVa PW:DFT-GGA-PW91, 750 eVb –22.8 –35.63 LCAO:HF, DB ECP; 3 Ti-L LCAO:HF, DB ECP; 3 Ti-L, with equal –28.25 basis on all species (for BSSE) LCAO:HF, all-electron; 3 Ti-L –28.32 LCAO:DFT-GGA-PW91, DB ECP; 3 Ti-L –40.74 LCAO:DFT-GGA-PW91, DB ECP; 5 Ti-L –35.15 –(14-24) Experimentc a b c

–24.6 –18.4 –24.9 –21.0 –37.27 –28.91 –31.39 –36.42 –30.20 –

[809] [803] [798]

Table 11.12. z-shifts (˚ A) of Ti and O atoms on the bare surface of (110) rutile 3 Ti-layer models obtained by LCAO calculations, [790] Method→ Atom type (symbol)↓ Sixfold coordinated surface Ti (Ti6f ) Fivefold coordinated surface Ti (Ti5f ) Bridging surface oxygen (Obr ) Threefold coordinated surface oxygens (O3f ) Oxygen underneath Obr (OuO ) Oxygen underneath Ti5f in the middle Ti-layer (OuTi )

HF, all- HF, DB DFT, DB HF, allelectron ECP ECP electr. [779] 0.13 0.15 0.19 0.09

Exp. [804] 0.12± 0.05

–0.12

–0.12

–0.09

–0.15

–0.16± 0.05

–0.07

–0.07

0.01

–0.14

–0.27± 0.08

0.15

0.14

0.21

0.07

0.05/0.16± 0.08

–0.02

–0.02

–0.01

–0.07

0.05± 0.08

–0.01

0.01

0.03

–0.02

0.00± 0.08

492

11 Surface Modeling in LCAO Calculations of Metal Oxides

Kohn–Sham Hamiltonian (both on the PW and LCAO basis) produces the larger expansion of the slabs towards the vacuum, making them thicker and thus affects the vertical displacements of atoms to be more positive relative to HF and experimental values. The same effect was found for hydroxylated and hydrated species: horizontal and vertical distortions of top-surface oxygens and titaniums from their bulk positions are substantially larger for DFT-LCAO than for HF-LCAO. Also, the DFT method leads to more flexible hydroxyl groups on hydroxylated surfaces and as a consequence, to shorter H-bonds between them. The LCAO basis gives the possibility to calculate atomic charges in a more direct way than the PW basis. In was found in [790] that the values of Mulliken charges lie in a reasonable region and reflect the partially covalent nature of chemical bonds in titanium oxides, although the HF method gives absolute values about 25% larger than the DFT method. The deviations of atomic charges on the surface of unhydroxylated slabs from their bulk values, generally, were less than 0.1 e both for Ti and O atoms, except the charge on the bridging oxygen obtained in DFT calculations that was reduced by more than 0.2 e. It is interesting to note that oxygen charges in hydroxylated and hydrated slabs become less negative in the order: |q(Obr )| > |q(O3f )| > |q(OH2 O )|, which is correlated with the acidity of the corresponding hydroxyls. Tables 11.11 and 11.12 demonstrate the relatively large dependence of the calculated water-adsorption energies on the nature of the quantum-mechanical approximation (HF or DFT) and type of basis set (PW or LCAO) within the same periodic-slab model. It should be noted that the results for the equivalent 2D and 3D slab models coincide if the sufficiently large vacuum gap for 3D model is used, see Sect. 11.1.3. Nevertheless, we can conclude that the Kohn–Sham Hamiltonian using both PW and LCAO basis sets gives the order of the adsorption energy that is in better agreement with the experimental observations. However, the relaxation of the surface atoms seems to be more appropriate to experimental data [804] in the case of the HF calculations. The long-term goal of research [790] was to model the interface of TiO2 and bulk water, so solvation forces will need to be included to predict adsorption energies and surface structures. Solvation forces are difficult to include in periodic DFT calculations because a large number of H2 O molecules must be included in layers between rutile slabs to simulate bulk water. On the other hand, the HF embedded-cluster approach in the program CECILIA [801] can include H-bonding to H2 O molecules not directly bonded to the surface and long-range solvation via a dielectric continuum half-space representing bulk water. The embedded-cluster approach is one obvious way to develop a force field for the Ti–O–H system representing the real TiO2 –H2 O interface [791], so consistency between this approach and the results of periodic calculations would be a useful step toward reliable molecular-dynamics simulations of the larger-scale rutile–water system. Embedded-cluster calculations have been made for comparison with periodic studies using the model developed in [801]. This model utilizes a three-level interaction approach and takes into account the long-range forces properly. The central stoichiometric part of the cluster is treated by the ab-initio LCAO method using pseudopotential cores of extra Ti atoms to saturate the dangling bonds of the outermost oxygen atoms. A large stoichiometric grid of point charges represents the surrounding ions, and a special array of point charges distributed on a closed surface around the cluster

11.2 Surface LCAO Calculations on TiO2 and SnO2

493

is constructed to reproduce the remainder of the long-range Coulomb interactions (i.e. the Madelung potential of the bulk crystal at the surface). The neutrality condition is satisfied separately for the stoichiometric part of the cluster and lattice array of ions plus extra pseudopotential cores. Embedded-cluster calculations were carried out on stoichiometric clusters of different size: Ti7 O14 , Ti13 O26 and Ti17 O34 (the largest cluster is shown in Figures 11.14 and 11.15).

Fig. 11.14. Embedded-cluster results for the HF geometry of Ti17 O34 − H2 O: associative adsorption, [790]. Small-sized balls represent the Ti pseudopotential cores

In the Ti7 O14 and Ti13 O26 −H2 O clusters only one Ti, one bridging O and the H2 O atoms were allowed to relax during energy minimization. In contrast, the additional 4 oxygen atoms (nearest to the central Ti) were free to move in the Ti17 O34 − H2 O cluster. The larger cluster and greater surface relaxation were considered necessary to adequately describe the possible H-bonding arrangements of associatively and dissociatively adsorbed H2 O on the TiO2 (110) surface. About 1000 full-point charges (i.e. +4 and -2) from the 4 Ti-layer slab and up to 310 partial charges fitted to the Madelung potential of the rest of the crystal were introduced to represent the electrostatics of the bulk TiO2 . The positions of cluster atoms and lattice ions were chosen in accordance with the experimentally determined surface relaxation [804]. For embedded-cluster HF LCAO calculations the Hay–Wadt LANL1 or LANL2 [483] pseudopotentials for Ti atoms and SBK [485] pseudopotential on O atoms and corresponding basis sets have been used. In the case of LANL1, the 3s and 3p electrons of the Ti atom are included in the atomic core, whereas in the case of LANL2 the corresponding orbitals are treated as semicore states. For the pseudopotential cores of Ti atoms saturating the dangling bonds, only the semicore basis functions were included in the case of the LANL2 pseudopotential, whereas in the case of the LANL1

494

11 Surface Modeling in LCAO Calculations of Metal Oxides

Fig. 11.15. Embedded-cluster results for the HF geometry of Ti17 O34 − H2 O: dissociative adsorption, [790]. Small-sized balls represent the Ti pseudopotential cores

pseudopotential the basis functions were not included. This trick provides the same net charge on the extra pseudopotential Ti cores as on the lattice ions. Table 11.13. Embedded-cluster results (without BSSE), [790] and experimental adsorption energies for H2 O/TiO2 (110) (kJ/mol) Method

Cluster Molecular Dissociative Reference adsorption adsorption LCAO:HF,LANL1 Ti17 O34 –94a –48a [790] Ti13 O26 –158 –90 [790] LCAO:HF,LANL2 LCAO:HF,LANL1 Ti7 O14 –137b –31b [805] –146 –95 [805] LCAO:B3LYP,LANL1 Ti7 O14 –(59–100) [798] Experiment a b

Estimated BSSE is about 35 kJ/mol. Estimated BSSE is about 29 kJ/mol.

The embedded-cluster results for water-adsorption energies are given in Table 11.13. This table demonstrates the dependence of the embedded-cluster results on the cluster size, basis set and Hamiltonian used. When the size of the cluster is increased, the energy difference between the associative and dissociative adsorption mechanisms decreases. The results for embedded-cluster calculations are different from that for the periodic models. Adsorption energies of a water molecule in the cluster case were much more favorable for the associative mechanism (Table 11.13), which is in better agreement with experimental observations. The predicted adsorption energies for the asso-

11.2 Surface LCAO Calculations on TiO2 and SnO2

495

ciative mechanisms are higher than the measured values. There is no significant difference between the optimized geometry for water adsorption in Ti13 O26 and Ti17 O34 , the structures of the largest one are shown in Figures 11.14 and 11.15. No evidence of H-bond interactions was found in either the dissociative or associative adsorption structures in contrast to periodic PW and LCAO calculations. Bridging oxygen atoms in the cluster model appear to exhibit less relaxation than in periodic slabs. The reason for such divergence between the periodic and cluster approaches is not entirely clear. The most probable reason is the differences in symmetry and boundary conditions: the absence of periodic boundary conditions may lead to artificial rigidity of the Ti–O bonds. Also, assigning of formal charges to lattice ions may overestimate the Madelung potential of the bulk crystal in the cluster model. On the other hand, the 3- and 5-layer periodic models apparently overestimate the surface relaxation and the thicker-slab models are needed for improved quantities. The results obtained in [790] correspond well with the experimental observation that the probability of H2 O dissociation is increased with decreasing coverage. One explanation of this change in mechanism with coverage is that H2 O molecules can readily align to provide the maximum H-bonding interaction in associatively adsorbed structures. At low coverages, H-bonding energies are not as significant as at higher coverages, so the additional energy of forming stronger Ti–OH bonds (as compared to Ti–OH2 bonds) outweighs the H-bonding term and dissociation may dominate. Applying the different ab-initio quantum-mechanical approximations (DFT-PW, DFT-LCAO or HF-LCAO) within the periodic models produces qualitatively close results, but disagreement may exist in reproducing the difference between close values if this difference is about several kcal/mole. In particular, the DFT-LCAO method gives the order of the associative and dissociative water adsorption energy that is in better agreement with the experimental observations. Additional investigations of H-bonding between water molecules and oxygen atoms on the TiO2 surface using both DFT and HF methods should be made to resolve the disagreement between the periodic and embedded-cluster calculations. The additional information about the water adsorption mechanism can be obtained in calculations of the oxides with the same bulk structure but different metal atom. The results of water adsorption on SnO2 surfaces is discussed in the next section. 11.2.3 Single-slab LCAO Calculations of Bare and Hydroxylated SnO2 Surfaces Cassiterite (SnO2 in rutile structure)-based materials are extensively studied due to their gas-sensing properties. The theoretical modeling of the surface processes plays an important role in this research. The first-principles methods have made an increasingly significant contribution to understanding the nature of clean SnO2 surfaces [806–808] and the interaction of these surfaces with adsorbed water [809–811], methanol [812], CO [813, 814], and O2 [815] molecules. Many of these calculations use the DFT PW periodic-slab model. The LCAO single-slab approach has been successfully applied for investigation of cassiterite [806, 812–815] A review of both PW and LCAO studies of adsorption on the perfect and reduced surfaces of metal oxides can be found in [784].

496

11 Surface Modeling in LCAO Calculations of Metal Oxides

We discuss here the results of LCAO calculations [816] based on both plain DFT PBE and hybrid B3LYP Hamiltonians to investigate the surface relaxation and adsorption of water molecules on the stoichiometric (110) and (100) SnO2 surfaces. The aims of this study can be summarized as follows: (1) comparison of the plain DFT functionals with the B3LYP hybrid functional for the surface modeling; (2) analysis of the energetic and structural adsorption properties of the stoichiometric (110) and (100) SnO2 surfaces (the latter was not studied before); and (3) finding the difference in the adsorption of water on (110) and (100) surfaces. Table 11.14 gives the comparison of calculated and experimental structure parameters (a, c, u), valence band (VB) width and bandgap (BG) for bulk SnO2 in rutile structure. As can be seen in Table 11.14, the LCAO-calculated values are in reasonTable 11.14. Calculated equilibrium crystallographic parameters, valence-band width, and bandgap for the bulk rutile SnO2 crystal, [816] Parameter ExpeLCAO LCAO DFT calc. PW DFT calc. riment DFT calc. [816]a B3LYP PBE B3LYP [815] LDA [817] PW91 [807] PW91 [818] a (˚ A) 4.737 4.690 4.745 4.718 4.714 4.778 4.731 c (˚ A) 3.186 3.147 3.185 3.187 3.241 3.232 3.157 c/a 0.673 0.671 0.671 0.675 0.688 0.676 0.667 u 0.306 0.307 0.307 0.307 0.307 0.306 0.306 VB width 7.5–9.0 8.56 8.24 9.0 – – 6.5 (eV) [820] BG (eV) 3.6 [821] 4.03 1.56 3.30 – – 1.15 a

Calculated Fermi-energy level: –4.73 eV (B3LYP) and –4.01 eV (PBE). Experimental estimation: –4.35 eV [819]

able agreement with the experimental data and the results of DFT PW computations. The B3LYP form of GGA slightly underestimates the cell dimensions, whereas the PBE functional gives values that are closer to the experimental data. The minor discrepancies between the results of B3LYP calculations [816] and [815] may be due to the different form of pseudopotentials (Hay–Wadt in the first case and Durand– Barthelat in the second case) taken. The theoretical valence-band (VB) width (of 8.56 eV using B3LYP and 8.24 eV using PBE) agrees well with the experimental data [821] of 7.5–9.0 eV. As expected, the B3LYP method gives the bandgap (BG) of 4.0 eV that is close to the experimental value of 3.6 eV [821]. The differences between the various PW-DFT calculations reported in Table 11.14 are obviously due to the computational details (choice of pseudopotentials, cutoff energy, and others). In all cases, the plain DFT methods produce a bandgap that is about 2 to 3 times narrower than the experimental value. The valence-band density of electronic states (DOS) in bulk crystal calculated using the B3LYP functional [816] shows the well-known fact that oxygen p-states give the main contribution to the VB DOS, whereas the tin sand p-states form the bottom of the conduction band.

11.2 Surface LCAO Calculations on TiO2 and SnO2

497

From the results of PW-DFT periodic slab calculations [807], the cassiterite (110) and (100) type-2 surfaces are the most stable of the low-index faces and, hence, they should be the dominant crystallite arrangement of SnO2 . To check this by the single-slab approach LCAO calculations of the stoichiometric slabs (consisting of a whole number of SnO2 formula units) have been used for surface modeling [816]. As in the rutile TiO2 case the distribution of the bulk unit cell six atoms over atomic planes depends on the surface chosen: (110) O–Sn2 O2 –O; (100) O–Sn–O–O–Sn–O (see Fig. 11.3). The bridging oxygen atoms Obr terminate both surfaces; two bonds connect them with the sixfold Sn (Sn6f ) atoms on the rutile structure surfaces. There are fivefold tin atoms (Sn5f ) with one unsaturated bond and threefold oxygens (Os ) in the atomic plane next to Obr , see Sect. 11.2.2 and Fig. 11.6. The positions of all the atoms in slabs were allowed to relax at a fixed dimension of the 2D surface unit cell that was taken from the bulk optimization result. The surface energy was calculated using (11.8) for three- and five-layer slabs for a (110) surface (9 and 15 atomic planes), and two- and 2.5-layer (12 and 15 atomic planes) slabs for a (100) surface to check the convergence of the surface energy with n in the DFT PBE LCAO calculations. The influence of the basis-set superposition error (BSSE) on the calculated values has also been estimated. For this purpose, three extra atomic layers of ghost atoms have been added on each side of the relaxed slabs and the total energy was recalculated. Table 11.15. Calculated energy per unit area of the (110) and (100) surfaces of SnO2 crystal, [816] SurNumber of Surface energy (J/m2 ) face cell k-set atomic planes PBE B3LYP Ref.data /Sn2 O4 layers unrelaxed relaxed relaxed relaxed 110 1×1 6×3 9/3 1.70 1.29 1.45 [818] 15/5 1.69 1.26 1.40 1.04 [807]b (1.14)a 100 1×1 6×4 12/2 1.74 1.37 – 15/2.5 1.73 1.37 1.48 1.14 [807]b (1.26)a a b

BSSE-corrected values are given in parentheses. 5–6 Sn2 O4 –layers have been used in [807] for estimation of the surface energy.

The obtained surface energies are given in Table 11.15. Table 11.15 demonstrates that for both DFT PBE LCAO and hybrid B3LYP LCAO methods a (110) surface is more stable than a (100) surface, in accordance with PW-DFT calculations [807]. Comparing the surface energies in Table 11.15 before relaxation, we see that they are approximately the same for both surfaces. So, apparently, it is relaxation that provides the larger relative stability of the (110) surface. The B3LYP surface energies are larger than the corresponding PBE values by about 0.1 J/m2 . On the other hand, the BSSE correction reduces the surface energies by about 0.1 J/m2 , making them closer to the PW result [807]. However, it should be noted that the difference between (110) and (100) surface energies is smaller using the B3LYP functional.

498

11 Surface Modeling in LCAO Calculations of Metal Oxides

In Table 11.16 we compare the bandwidths for the different surface models; the calculated Fermi energy is also included. Table 11.16. Widths of electronic bands and Fermi energy (eV) for bulk SnO2 and for the different surface models (B3LYP results; AH – associatively hydroxylated, DH – dissociatively hydroxylated), [816] Surfaces Band

Bulk

clean VB width 8.56 9.24 4.04 3.14 BG EFermi –4.73 –8.38

(110) AH 8.45 4.22 –7.22

AD 8.56 4.29 –8.11

clean 8.34 4.07 –9.24

(100) AH 8.23 4.45 –7.07

AD 8.61 4.54 –7.39

Table 11.16 shows that a clean (110) surface has a wider VB and a narrower BG than a clean (100) surface. This fact can be attributed to the difference in distribution of the electronic states corresponding to bridging oxygens on these two surfaces. It is known that just the bridging oxygens primarily contribute to the density of electronic states at the top of the VB. The LCAO calculations confirm this conclusion. We compare the obtained total DOS of the valence band for bulk, (110), and (100) surfaces in Fig. 11.16.

Fig. 11.16. Total valence-band DOS of bulk SnO2 crystal (fine line), its (110) (bold dark line) and (100) (bold gray line) surfaces calculated using the B3LYP functional (see text for explanation of energy scale)

Here, and in all figures below, the zero energy is taken at the Fermi level of the bulk crystal and all curves were shifted in such a way that the centers of O 1s bands coincide. All DOS values have been calculated per Sn2 O4 formula unit in the solid phase to permit comparison on an equal scale. It is clearly seen in Fig. 11.16 that the new Obr subband appears in the surface systems at the top of the bulk VB.

11.2 Surface LCAO Calculations on TiO2 and SnO2

499

In the case of a (110) surface the broadening of the DOS distribution towards the BG is wider and the separation of the Obr subband from the bulk VB is more prominent than those in the case of a (100) surface. This fact indicates [784] that the basicity of Obr is larger on a (110) surface than on a (100) surface. Vertical displacements of the surface atoms relative to their positions in the bulk structure are reported in Tables 11.17 and 11.18. ˚) and atomic chargesa (e) on the SnO2 (110) surTable 11.17. Vertical displacements (A face (5 Sn2 O4 -layer slab results using LCAO DFT (B3LYP calculations; AH – associatively hydroxylated, DH – dissociatively hydroxylated), [816]

Atomb Sn6f , 6-fold surface tin Sn5f , 5-fold surface tin Obr , bridging oxygen Os , 3-fold surface oxygen Ou6f , subbridging oxygen Ou5f , oxygen underneath Sn5f Oterm , oxygen in terminal hydroxyl or water oxygen Hterm , hydrogen at Oterm or corresponding water hydrogen Hbr , hydrogen at Obr or corresponding water hydrogen

Bare surface z- charge shiftc 0.21 1.91 (0.22) –0.12 1.76 (–0.11) 0.05 –0.91 (0.09) 0.14 –0.93 (0.18) 0.04 –1.03 (0.07) –0.04 –0.93 (–0.04) – –

AH surface DH surface z- charge z- charge shift shift 0.10 1.97 –0.05 1.96 –0.06 2.00

0.04

1.99

0.05 –1.01 0.02 –0.79 0.04 –1.02 –0.01 –1.03 0.03 –1.03 –0.02 –1.04 –0.01 –1.04 0.02 –1.03 –

–0.66



–0.84







0.35



0.34







0.39



0.38

a Charges in the bulk SnO2 : q(Sn) = 2.12, q(O) = –1.06; charges in the isolated water molecule: q(O) = –0.62, q(H) = 0.31. b For atom indexing see text. c DFT result of [807] is given in parentheses.

As expected, the top-surface atoms have the largest displacements. However, there is a qualitative difference between the two surfaces under consideration. Namely, in the case of a (110) surface the shifts of Sn5f (inward) and Sn6f together with Os (upward) are the most noticeable, while in the case of a (100) surface only the bridging oxygen has a marked positive displacement. In spite of the different calculation methods used, the agreement of these LCAO values with the PW data from [807] is excellent. The Mulliken population analysis has been applied for the calculation of the atomic charges that are also included in Tables 11.17 and 11.18. The noticeable reduction of the absolute charges for the top surface atoms is seen. This effect is relatively larger for a (100) surface than for a (110) surface. Thus, the charge of Sn5f decreases by

500

11 Surface Modeling in LCAO Calculations of Metal Oxides

˚) and atomic charges (e) on the SnO2 (100) surface Table 11.18. Vertical displacements (A (5 Sn2 O4 -layer slab results using LCAO DFT (B3LYP calculations)a , [816]

Atom Sn5f , surface 5-fold tin Sn6f , surface 6-fold tin Obr , bridging oxygen Os , 3-fold surface oxygen Ou5f , oxygen underneath Sn5f Ou6f , oxygen underneath Sn6f Oterm , oxygen in terminal hydroxyl or water oxygen Hterm , hydrogen at Oterm or corresponding water hydrogen Hbr , hydrogen at Obr or corresponding water hydrogen a

Bare surface z- charge shiftc 0.03 1.67 (0.05) 0.00 2.07 0.13 –0.83 (0.18) 0.07 –0.94 (0.09) –0.02 –0.95 0.00 –1.05 – –

AH surface DH surface z- charge z- charge shift -shift 0.02 1.95 –0.01 1.97 0.00 2.10 –0.01 2.11 0.05 –1.03 0.00 –0.81 0.04 –1.02 –0.02 –1.05 –0.01 –1.04 0.01 –1.03 0.00 –1.06 –0.01 –1.06 – –0.65 – –0.85







0.35



0.32







0.40



0.40

See footnotes to Table 11.17.

0.36 on a (110) surface, while on a (100) surface it decreases by 0.45 relative to the tin charge in the bulk crystal. No such significant charge reduction was found in the case of rutile TiO2 [790] for the surface Ti atoms. The Obr charge on a (110) surface is more negative than that on a (100) surface (–0.91 vs. –0.83). This correlates with the conclusion about the larger basicity of the bridging oxygen on the (110) surface. The results of LCAO calculations of the bare surface slabs validate the admitted approach (including single-slab model, LCAO basis, and BSSE correction) and indicate that the use of hybrid functionals to describe SnO2 surfaces provides more reasonable results. PW-DFT calculations [811] predicted a significant difference in the structure of adsorbed H2 O on (110) TiO2 (rutile) and SnO2 surfaces, where the dissociative adsorption was favored on SnO2 vs. associative adsorption on TiO2 . The difference in H2 O behavior on the surface was attributed [811] to the larger 2D unit-cell parameters of SnO2 compared to those of TiO2 (a = 3.186 ˚ A, b = 6.699 ˚ A; vs. a = 2.959 ˚ A, b = 6.497 ˚ A, respectively). The larger unit-cell dimensions caused H-bonding among the adsorbed H2 O molecules on the surface to be less energetically important on SnO2 than on TiO2 . It was pointed out in [784] that molecular adsorption on an oxide surface can be understood as an acid–base process. From this point of view, the more covalent character of the Sn–O bonds compared to the corresponding Ti–O bonds might be the second factor that enforces the dissociation of water on the SnO2 surface. In fact, the electronegativity of tin (1.8) is markedly greater than the electronegativity of titanium (1.4). The significant reduction of the top surface Sn5f charges (see Tables

11.2 Surface LCAO Calculations on TiO2 and SnO2

501

11.17 and 11.18) correlates with the higher electronegativity of tin. As a result, the hydrated Sn5f ion perhaps is a stronger Brønsted acid than the hydrated Ti5f ion on the rutile surfaces. The water hydrolysis can obviously be promoted further by the larger basicity of the bridging oxygens (see discussion below). To check the validity of the computational scheme used for describing the hydrogen bonds, a preliminary calculation of the water-water interactions has been made [816]. Full geometry optimization has been made for the isolated water dimer starting with the well-known most favorable relative orientation of the water molecules. The values of 30 kJ/mol using PBE and 26 kJ/mol using B3LYP for the H-bond energy (without zero-point correction and BSSE correction) have been obtained. This is not bad compared to the corresponding MP2 value, 25 kJ/mol. The optimal geometry is also very close to the MP2 result: the O–O distance is 2.86 ˚ A, 2.88 ˚ A, and 2.91 ˚ A for PBE, B3LYP, and MP2 calculations, respectively. On the other hand, this example shows that the energy difference of the order of 5 kJ/mol per H-bond is within the error bounds of the usual DFT calculations. It also gives evidence that the B3LYP functional can produce more correct values for H-bonded systems. A single-slab LCAO approach was firstly used in [816] for modeling the water adsorption on SnO2 surfaces. A doubled (in the x direction) 2D unit cell was used to model the water adsorption on both surfaces. The Monkhorst–Pack 3 × 3 and 3 × 4 sets of special k-points were taken for the Brillouin-zone sampling in (110) and (100) slabs, respectively. Up to fifteen atomic planes were included in both types of SnO2 slabs for the adsorption-energy calculation. Two water molecules were placed on each side of the slab to simulate the full-monolayer coverage. Inversion symmetry was imposed on all systems containing water molecules to ensure the equivalence of both slab sides. The optimization of all atomic positions in the slabs has been made. The contribution of BSSE to the calculated adsorption energies has been estimated using the PBE functional. As in the case of the surface-energy calculation, the ghost atoms have been added to represent the water molecules above the optimized slabs and the total energy was recalculated. The energy of the isolated water molecule has also been recalculated with the 10–15 ghost atoms originated from the corresponding SnO2 surfaces. The resulting BSSE is approximately independent of the surface kind and reaches 18 kJ/mol of adsorbed water (see Table 11.19). Although this is a noticeable contribution, it decreases all calculated adsorption energies by almost the same value, and does not influence the relative stability of associative and dissociative adsorption forms. The obtained adsorption energies for the (110) surface (Table 11.19) satisfactorily agree with the former periodic-slab PWDFT calculations [810, 811]. In simulations [816] the water molecules initially were placed above the fivefold tin. During the optimization both (on each side) water molecules spontaneously dissociated in the case of PBE calculations, whereas a stable associative structure has been obtained in the case of the B3LYP functional (Fig. 11.17a). Hence, in contrast to previous DFT calculations the hybrid HF-DFT functional leads to stable molecular adsorption on this surface. Starting with the broken water molecules, a stable dissociated structure has been obtained where hydroxyls were attached to fivefold tin and protons were bonded to the bridging oxygens (Fig. 11.17b). The energy of the hydrolyzed structure is lower by about 35 kJ/mol than the energy of the molecular structure (see Table 11.19). It is difficult to compare directly these

502

11 Surface Modeling in LCAO Calculations of Metal Oxides

Table 11.19. Ab-initio adsorption energies per water molecule for H2 O monolayer on SnO2 surfaces (N /M – Number of atomic planes/Sn2 O4 layers), [816] Surface Cell k-set N /M 110

100

a

Method

Adsorption energy (kJ/mol) associative dissociative 2×1 3×3 15/5 LCAO DFT unstable –179.7 (PBE) (–162)a LCAO DFT –143.2 –176.6 (B3LYP) PW DFT unstable –165.0 (PW91) [810] PW DFT unstable –170.8 (PW91) [811] 2×1 3×4 15/2.5 LCAO DFT –130.2 –147.0 (PBE) (–112)a (–129)a LCAO DFT –116.86 –145.0 (B3LYP)

BSSE-corrected values are given in parentheses for LCAO DFT (PBE) calculations.

Fig. 11.17. Optimized monolayer structure for the water molecules adsorbed on a (110) SnO2 surface obtained using the B3LYP functional, [816]: a) stable structure for molecular adsorption; b) stable structure for dissociative adsorption. Large dark gray balls are O atoms; light gray balls are Sn atoms; small white balls are H atoms.

adsorption energies of water on SnO2 with those on TiO2 [790] due to the different methods used; however, the adsorption on a (110) surface of cassiterite seems to be more exothermic by approximately 30 kJ/mol than the adsorption on a (110) surface of TiO2 . This conclusion is in accordance with the DFT result of [809], where it is found that the dissociative configuration gives an adsorption energy of 134 kJ/mol for SnO2 (110) and 104 kJ/mol for TiO2 (110). In [809] it has been roughly estimated that the experimental adsorption energy on SnO2 (110) should be about 110 kJ/mol. The data in Table 11.19 show that most of the theoretical values are 50% larger than the proposed estimation. Both resulting geometries are stabilized by the H-bonds between water hydrogen and bridging oxygen in the associative case (Fig. 11.17a) and bridging hydrogen and oxygen of the terminal hydroxyl in the dissociative case (Fig. 11.17b). It should

11.2 Surface LCAO Calculations on TiO2 and SnO2

503

be noted that the PBE functional produces shorter hydrogen bonds than the B3LYP functional. In contrast to the (110) TiO2 surface, there is no sufficiently strong interaction between the neighboring water molecules on the (110) SnO2 surface. The distance Ow–Ow between the water oxygens is 3.1 ˚ A and 3.4 ˚ A on TiO2 and on SnO2 (110) surfaces, respectively. This is in accordance with the results of Lindan [811], who pointed out the role of intermolecular interactions in the stabilizing of the molecular adsorption on the (110) TiO2 surface. On the other hand, the H-bond between A, indicating the water hydrogen and bridging oxygen proves to be very short, 1.53 ˚ large basicity of Obr . Moreover, H-bonds, which could be hypothetically obtained with the PBE functional for molecular adsorption on a (110) surface, should be even shorter than those using the B3LYP functional, as occurs in all other cases with the real H-bonds. This can be the main reason why the molecular adsorption becomes unstable using the PBE variant of DFT. Also, this example shows that particular approximations influence the details of the calculated potential energy surface for the water–oxide interactions. Taking into account the fact that the B3LYP approximation gives the better values of energy and bond distances for the H-bonded systems, it can be supposed that hybrid HF-DFT functionals can produce the more correct data for the water adsorption as well. This could be important not only in the case of SnO2 but also for other materials: applying the hybrid functionals may lead to the greater stability of molecular forms adsorbed on the oxide surfaces than predicted by plain DFT techniques. Whereas many groups have studied the water adsorption on TiO2 surfaces, there have been few experimental water-adsorption studies for SnO2 . In [822] thermal desorption spectroscopy and ultraviolet photoemission spectroscopy have been used to investigate perfect and defective surfaces of SnO2 . In this study it was suggested that the amount of dissociation was about 10–15% on the stoichiometric (110) surface and the dissociation increased to 35% on the defective surface. Although additional experimental and theoretical work may be needed to confirm these conclusions, these data at least show that the molecular form of water can be stable on the cassiterite (110) surface, which is in accordance with B3LYP results under consideration. The DOS for both types of water adsorption on a (110) surface are displayed in Fig. 11.18. In the molecular adsorption case, depicted in Fig. 11.18a, the Obr subband tightly adjoins the bulk VB states, and a new Ow subband (corresponding to the water electronic states) was formed at the bottom of the VB. For comparison, the clear surface DOS projected to bridging oxygen states is also plotted in Fig. 11.18. In the dissociative case, Fig. 11.18b, the Obr subband almost completely disappeared and three new peaks originated from electronic states of the terminal hydroxyl group. One of these peaks is very sharp and is prominently separated from the top of the VB. As in the case of the (110) surface, two different initial states were chosen for the (100) surface. In the first, the water molecules were placed near the fivefold tin. The optimization did not change considerably the positions of water molecules using both PBE and B3LYP functionals (Fig. 11.19a). Thus, the molecular form of adsorption is obviously stable on the (100) surface. The relative positions of fivefold tin and bridging oxygen favor the formation of Hbonds between the water hydrogen and bridging surface oxygen (Fig. 11.19a), although these bonds are not so short as in the (110) case. A stable structure for the

504

11 Surface Modeling in LCAO Calculations of Metal Oxides

a 300

Obr clean Total Water Obr

DOS (arb.un.)

250 200 150 100 50 0

-10.0

-8.0

-6.0

-4.0

-2.0

0.0

2.0

-2.0

0.0

2.0

b Obr clean Total (OH)term (OH)br

0

150 200 250 300 50 DOS 100 (arb.un.)

E (eV)

-10.0

-8.0

-6.0

-4.0

E (eV)

Fig. 11.18. Total and O-projected valence-band DOS in the hydroxylated (110) SnO2 surface systems (see text for explanation of energy scale), [816]. a) Molecular adsorption: total DOS (fine line), projection onto the water states (bold dark line), projection onto the Obr states (bold gray line); b) dissociative adsorption: total DOS (fine line), projection onto the (OH)term states (bold dark line), projection onto the (OH)b states (bold gray line). The projection onto the Obr states in the clean (110) surface is shown by a dotted line.

11.2 Surface LCAO Calculations on TiO2 and SnO2

505

Fig. 11.19. Optimized monolayer structure for the water molecules adsorbed on a (100) SnO2 surface obtained using the B3LYP functional, [816]: a) stable structure for molecular adsorption; b) stable structure for dissociative adsorption. Large dark gray balls are O atoms, light gray balls are Sn atoms; small white balls are H atoms.

dissociative adsorption (Fig. 11.19b) was obtained from another initial state with the broken water molecules. There are no straight-line H-bonds in this structure. Nevertheless, as in the case of the (110) surface, the dissociative adsorption is more favorable (by about 30 kJ/mol) for the (100) SnO2 surface. The absolute value of the adsorption energy on a (100) surface is lower than that on a (110) surface. This is in accordance with the PW-DFT investigation of Bandura et al. [791]. As may be expected, the atomic displacements for the hydroxylated surfaces are much smaller (especially for the dissociative adsorption) than those in the case of the bare surfaces (Tables 11.17 and 11.18), due to saturation of the vacant coordination places for the surface tin up to the total coordination number 6. Data in Tables 11.17 and 11.18 show that oxygen charges in the hydroxyl groups are noticeably less negative than charges on the other surface oxygens. The hydrogen charges were arranged in the order q(Hbr ) > q(Hterm ) > q(HH2 O ), which correlates with the relative acidity of the corresponding O–H bonds [823]. Figure 11.20 reports the DOS distributions for hydroxylated (100) surfaces. The DOS for the associative adsorption (Fig. 11.20a) differs from that for the clean (100) surface mainly by the presence of the Ow subband at the bottom of the VB. The difference between the DOS for the slab dissociatively adsorbing water (Fig. 11.20b) and the DOS for the clean (100) surface is less significant than that in the (110) case. The terminal OH states also contribute to the top of the VB, but corresponding peaks are not as sharp as for the hydroxylated (110) surface. Except for the narrow zone at the top of the VB, the total DOS in the last case resembles the total DOS for the bulk crystal, which is also plotted in Fig. 11.20b for comparison. Comparing the results for the clean and hydroxylated surfaces, one can conclude that a (110) surface exhibits stronger hydrophilic properties than a (100) surface due both to the more favorable geometrical structure and the more basic nature of the bridging oxygen. The discussion above demonstrates that use of the hybrid HF-DFT approach allowed new results for the clean and hydroxylated oxide surfaces compared with plain DFT techniques to be obtained. The comparison of plain DFT functionals with the HF-DFT B3LYP hybrid functional shows interesting differences, which could be im-

506

11 Surface Modeling in LCAO Calculations of Metal Oxides

a 300

Obr clean Total Water

250

DOS (arb.un.)

200

Obr

150 100 50 0

-10.0

-8.0

-6.0

-4.0

-2.0

0.0

2.0

-2.0

0.0

2.0

E (eV)

b 300

bulk Obr clean Total (OH)term (OH)br

DOS (arb.un.)

250

200

150 100

50

0

-10.0

-8.0

-6.0

-4.0

E (eV)

Fig. 11.20. Total and O-projected valence-band DOS in the hydroxylated (100) SnO2 surface systems. a) Molecular adsorption; b) dissociative adsorption. (The sense of line types and energy scale are the same as in Fig. 11.19.) The projection onto the Obr states for the clean (100) surface is shown by the dotted lines, and the total bulk DOS is shown in b) by open circles.

portant not only in the case of SnO2 but also for other materials: in contrast to DFT plane-wave calculations (spontaneous dissociation), an associated adsorption of the water molecules becomes possible not only in the case of the (100) surface but also at the most stable (110) surface judging by the hybrid functional. This fact is probably due to the shortening of the H-bonds by the plain DFT methods. LCAO HF-DFT investigation, as well as previous plane-wave calculations, shows that water dissociation on SnO2 surfaces is more favorable than on the similar TiO2 surfaces. Not only may the geometrical factors favor the hydrolysis of water on cassi-

11.3 Slab Models of SrTiO3 , SrZrO3 and LaMnO3 Surfaces

507

terite surfaces but also the more covalent nature of Sn–O bonds and the larger basicity of bridging oxygens in SnO2 comparably to TiO2 . One can conclude that the arrangement of H-bonds between the hydroxyl hydrogens and surface oxygens, as well as between the water molecules themselves, plays an important role in stabilizing the water adsorption on the metal-oxide surfaces. Thus, one of the reasons why the absolute value of adsorption energy on a (100) surface is lower than that on a (110) surface is the relative positions of oxygen and tin atoms being less profitable for the H-bond formation. The general agreement between the results of calculations using the different bases (LCAO and PW) or the different slab models (2D and 3D) justifies the validity of the various ab-initio methods to study the molecular adsorption on the crystalline surfaces. However, the BSSE correction may be needed to obtain more precise absolute adsorption energies within the LCAO calculations. In the next section we consider the surface modeling in cubic perovskites.

11.3 Slab Models of SrTiO3 , SrZrO3 and LaMnO3 Surfaces 11.3.1 Hybrid HF-DFT Comparative Study of SrZrO3 and SrTiO3 (001) Surface Properties A variety of practical applications of perovskite systems ABO3 (the piezoelectrical and electro-optical devices, fuel cells, microelectrodes) have stimulated experimental and theoretical investigations of their surfaces. Neither experimental nor theoretical investigations of the (001) surface structure of SrZrO3 are known. However, a large number of experimental studies of SrTiO3 (001) surfaces have been reported, see [824, 825] and references therein. In some of these investigations the reconstructed surfaces have been observed. A reconstruction of the SrTiO3 surface mostly relates to surface defects, e.g., oxygen vacancies that can be created by annealing in O2 atmosphere at high temperature [826]. At the same time, the relaxation of a perfect titanate surface (no oxygen vacancies) has been experimentally observed and investigated [827]. This confirms the fact that perovskite surfaces with regular stoichiometry can be stable in some conditions. The displacements of atoms for the surface relaxation have been found in [827] by medium-energy ion scattering (MEIS) method. Charlton et al. [828] have used room-temperature surface X-ray diffraction (SXRD) to investigate the 300 K structure of SrTiO3 (001) with 78% terminated TiO2 and 22% terminated SrO. For the TiO2 surface, there is good agreement with MEIS data in the position of the top-layer Ti, with both techniques pointing to an essentially bulk-terminated position. The data in [828] indicated that a lateral ferroelectric distortion is absent at 300 K on both terminations, consistent with some theoretical calculations [829]. However, a reflection high-energy electron diffraction (RHEED) study of the SrTiO3 (001) surface structure in a temperature region from 300 down to 5 K [830] gave evidence for a surface phase transition of a soft-mode type, promoted by the surface symmetry. The properties of the SrTiO3 (001) surface have been examined in many quantummechanical studies [824, 829, 831–833, 836, 837]. Calculations of (001) surfaces of BaTiO3 , PbTiO3 , [775, 838–841] and defective (001) and (110) SrTiO3 surfaces

508

11 Surface Modeling in LCAO Calculations of Metal Oxides

[842, 843] have also been made. A large number of cited calculations of surface properties of the strontium titanate are based on density-functional theory (DFT) and plane-wave basis (PW) set. In DFT LDA simulations [829] of the surface relaxation it has been found that relaxations account for 0.18 eV of the surface energy per surface unit cell, compiling around 15% of the total surface energy (1.36 J/m2 ). Examining slabs with different surface terminations, the authors conclude that the bandgap (BG) for the SrO surface almost does not change with respect to the bulk value, and no ingap state occurs. For the TiO2 surface, there is a substantial reduction of the BG. However, there are also no deep-gap surface states, in accord with experimental reports. It should be noted that the LDA approach utilized in [829] (as well as the generalized-gradient approximation, GGA) tends to underestimate the BG and leads to a substantial discrepancy between calculated (1.85 eV) and experimental (3.30 eV) BG for the bulk SrTiO3 . In [833, 836] the results of GGA calculations for SrTiO3 surface systems are reported. In general, the data obtained in these studies do not differ considerably from LDA results except for the values reported in [836] for atomic displacements that seem to be on the order of a half of the values reported by all other DFT studies and may be attributed to some systematic error. Again, no midgap surface state for either TiO2 - or SrO-terminated surfaces was found in the band structure, [836]. However, a clear small peak appears below the energy gap in the electronic density of states (DOS) of the TiO2 -terminated surface, which has a tendency to move into the midgap. In [833] the electron redistribution in the surface layers has been analyzed using charge-density decomposition based on the Bader criteria [844]. The authors concluded that relatively strong hybridization between the Ti and O atoms leads to a noticeable charge transfer in the SrTiO3 surface systems. This enhanced charge transfer correlates with the strength of the surface relaxation. In [824,831,832] HF and DFT LCAO calculations of (001) SrTiO3 surface employing a number of different exchange-correlation functionals have been performed. Prior to investigation of the surface properties, these authors tested the different quantummechanical methods on some bulk characteristics such as the lattice constant, bulk modulus, and BG. They obtained the best agreement between theoretical and experimental data for the hybrid HF-DFT B3PW method. The surface structure, surface energies, and electronic properties of the SrTiO3 (001) surface has been calculated by different HF and DFT LCAO methods. It was concluded that it is very difficult to choose a method reproducing all properties equally well, but hybrid HF-DFT techniques B3PW and B3LYP turned out to be the most reasonable. In [845] the comparison has been made between the calculated relaxed structures of the SrTiO3 surface obtained in various DFT PW studies and the data of several experimental investigations. Good agreement was found between the most theoretical studies, whereas the accordance of theoretical data with the available experimental results proved to be low. This fact can be explained by the poor agreement between the different experimental studies themselves [829,831]. It was suggested in [828] that a possible reason for this discrepancy is the influence of soft vibrational modes, which are thought [799] to give rise to a 0.2˚ A – disagreement between 0 K theory and 300 K experiment for TiO2 (110). Whatever the origin of the discrepancy, it presumably affects the TiO2 -terminated surface and the second-layer atoms on both surface types of SrTiO3 crystal.

11.3 Slab Models of SrTiO3 , SrZrO3 and LaMnO3 Surfaces

509

We discuss here in more detail the results of a hybrid HF-DFT LCAO comparative study of cubic SrZrO3 and SrTiO3 (001) surface properties in the single-slab model [825]. As known from [824], the consideration of systems with 7–8 atomic layers is sufficient to reproduce the essential surface properties of cubic perovskites. Three different slab models have been used in [825]. The first (I) and the second (II) ones consist of 7 crystalline planes (either SrO- or MO2 -terminated, respectively) being symmetrical with respect to the central mirror plane but nonstoichiometric (see Fig. 11.4). The central layer is composed of MO2 (M = Ti, Zr) units in the model I and SrO units in the model II. Both models I and II have been applied for studying the surface properties of titanates by ab-initio calculations [832]. The asymmetric model III is stoichiometric and includes 4 SrO and 4 MO2 atomic planes. Accordingly, it is terminated by a SrO plane on one side and by a MO2 plane on the other side and there is no central atomic layer. The model III has been included in the simulation to investigate the influence of the stoichiometry-violation in the symmetrical models I and II on the calculated surface properties. For all slabs a 1 × 1 surface unit cell has been taken. For the 2D translations in slabs the experimental bulk lattice constants of SrZrO3 (4.154 ˚ A) and SrTiO3 (3.900 ˚ A) were used that does not differ significantly from DFT B3PW LCAO theoretical values (4.165 ˚ A and 3.910 ˚ A respectively). In Table 11.20 are presented the results obtained for charge distribution and atomic relaxations for models I and II (Mulliken atomic charges and vertical atomic displacements are given). The displacements in the normal to the surface direction are given with respect to atomic positions in the unrelaxed bulk structure. The negative displacements correspond to the relaxation inwards, towards the bulk, while the positive ones relax outwards, i.e. to the vacuum side. It should be noted that the positions of atoms in the central plane exactly fit the corresponding bulk sites and can not relax due to the imposed mirror symmetry. There are no such restrictions for the model III. However, the absolute atomic displacements cannot be calculated unambiguously in this case due to uncertainty in the zero-level choice when the relaxed and unrelaxed structures are superimposed. This problem may be overcome by fixing the positions of the two middle layers at the bulk geometry. The model III does not satisfy this condition, so the corresponding absolute atomic displacements have not been calculated in model III. The obtained displacement d values for the SrTiO3 practically coincide with the shifts from calculations [831] where almost the same LCAO procedure has been used. Calculated vertical shifts for the upper Sr atoms are noticeably greater than the shifts of other atoms in both models I and II, though they are negative in the first and positive in the second case. Also, for SrZrO3 they are larger than for SrTiO3 . Displacements of other atoms are very similar on SrZrO3 and SrTirO3 surfaces, except the inward shift of the top oxygen atom on the ZrO2 surface that is much greater than the shift of the corresponding oxygen atom on TiO2 surface. The X-ray diffraction data [828] for SrTiO3 (001) surface are presented in the last column of Table 11.20. Note that the experimental values correspond to 300 K whereas, the theoretical values correspond formally to 0 K. As well as in other ab-initio investigations, the satisfactory agreement between the theory and experiment was found only for the displacements of the top Sr atoms in the model I. The comparison of calculated and measured displacements for the deeper atoms in SrTiO3 slabs is difficult as the experimental data reveals large errors. Furthermore, in these slab simulations, as in most other

510

11 Surface Modeling in LCAO Calculations of Metal Oxides

A) for the SrOTable 11.20. Mulliken charges1 q (|e|) and vertical atomic displacements d (˚ and TiO2 -terminated slabs models (I and II, respectively) Mo- LaSrZrO3 del yer Ion q d I 1 Sr 1.86 –0.304 O –1.50 0.035 2 Zr 2.17 0.083 O2 –1.38 0.027 3 Sr 1.88 –0.058 O –1.36 0.006 4 Zr 2.13 – O2 –1.35 – II 1 Zr 2.16 –0.092 O2 –1.26 –0.097 2 Sr 1.86 0.159 O –1.27 0.025 3 Zr 2.12 –0.014 O2 –1.31 –0.008 4 Sr 1.87 – O –1.33 –

Ion Sr O Ti O2 Sr O Ti O2 Ti O2 Sr O Ti O2 Sr O

q 1.85 –1.52 2.36 –1.45 1.87 –1.43 2.36 –1.42 2.29 –1.30 1.85 –1.36 2.35 –1.38 1.87 –1.40

SrTiO3 d dcalc 2 –0.185 –0.220 0.036 0.004 0.075 0.046 0.040 0.000 –0.031 –0.046 0.009 –0.004 – – – – –0.084 –0.131 –0.005 –0.062 0.140 0.097 0.020 –0.019 –0.010 –0.027 0.002 –0.019 – – – –

dexper 3 –0.25 ±0.07 –0.3 ±0.4 –0.24 ±0.07 –0.4 ±0.7 0.02 ±0.04 0.1 ±0.2 0.00 ±0.03 –0.5 ±0.3 –0.01 ±0.01 0.2 ±0.1

1 Bulk charges: SrZrO3 : q(Sr) = 1.88, q(Zr) = 2.12, q(O) = –1.33; SrTiO3 : q(Sr) = 1.87, q(Ti) = 2.53, q(O) = –1.47. 2 Experimental data [828] for SrTiO3 at 300 K. 3 Results of DFT PW calculations [829] using the optimized lattice constant a = 3.86 ˚ A.

studies, the cubic bulk unit cell is used to generate the surface unit cell and the corresponding symmetry (in the surface plane) is kept fixed; whereas the unit cell must be doubled and symmetry should be lowered to tetrahedral for reproducing of the ferroelectric distortions. Most certainly, the surface phase transition can also take place in the case of zirconate due to the existence of the lower-symmetrical orthorhombic modification at room temperature. Table 11.20 also presents the results of a previous LDA PW simulation [829] for SrTiO3 . LCAO displacements satisfactory correlate with the data of PW calculations. The Mulliken atomic charges are also given in Table 11.20. These quantities can be used for analysis of the electron redistribution in the surface layers, which may be important for adsorption of another species on the surface. Table 11.20 clearly shows that the Sr atomic charge is close to the bulk one and exhibits insensitivity to the kind of M atom, type of termination and number of layers. On the contrary, calculated Ti and Zr charges give evidence of considerable covalency of M–O bonds in both crystals. It can also be seen that deviations of the surface oxygen charges from their bulk values are relatively large and exhibit the opposite sign for the two types of surface termination. The calculated Mulliken charges are very similar to the charges obtained in [833] via the Bader density decomposition. When using models I and II the surface energy Es can be determined as a sum of two parts, Es = E unrel + E rel (T ). The first term E unrel is equal to one half of the energy for crystal cleavage into SrO- and MO2 -terminated slabs. It can be written as

11.3 Slab Models of SrTiO3 , SrZrO3 and LaMnO3 Surfaces

E unrel

1 unrel unrel = (MO2 ) − 7Ebulk Eslab (SrO) + Eslab 4S

511

(11.10)

unrel unrel where Eslab (SrO) and Eslab (MO2 ) are the energies for unrelaxed SrO- and MO2 terminated slabs, Ebulk is a bulk energy per primitive cell, and S is the area of the 2D cell. The second term is the relaxation energy for SrO- or MO2 -terminated slabs and is computed as a difference between the relaxed and unrelaxed slab energies:

E rel =

1 rel unrel (T ) Eslab (T ) − Eslab 2S

(11.11)

where T = SrO or MO2 . The surface energy of model III (stoichiometric slab) equals the difference between the energy of the slab and the quadruple energy of bulk primitive cell divided by 2S. The results for surface energy are summarized in Table 11.21. Table 11.21. The calculated surface energies Es (J/m2 ) and bandgaps BG (eV) Quantity I

1 2

Es BG

1.01 4.84

Es

1.20

BG

3.68 (1.86)2

Relaxed II (I+II)/2 SrZrO3 1.26 1.14 4.61 – SrTiO3 1.29 1.25 (1.36)2 2.76 – (1.13)2

Unrelaxed III (I+II)/2 III 1.13 4.56

1.41 –

Bulk

1.42 3.94 5.021

1.24

1.46 1.46 (1.55)2 2.48 – 2.63 3.651 (1.85)2

Experimental BG in bulk crystals: 5.9 eV for SrZrO3 [835], and 3.3 eV for SrTiO3 [834]. The results of DFT PW calculations [829] are given for comparison in parentheses.

For both crystals Es for SrO termination is slightly less than that for MO2 termination. It is important that the surface energies averaged over models I and II are very close to Es for the model III (this is valid both for relaxed and unrelaxed systems). The obtained values show that the surface energy of SrZrO3 is smaller than the surface energy of SrTiO3 crystal. The calculated value for the surface energy of SrTiO3 (1.24–1.25 J/m2 , see Table 11.21) agrees satisfactorily with the value calculated in [829] using the DFT PW framework (1.36 J/m2 ). In Table 11.21 the calculated bandgaps (BG) for slabs are compared. It is clearly seen that in all cases the BG for SrZrO3 systems is wider. This agrees with the larger ionicity of SrZrO3 in comparison with SrTiO3 . One can notice that in the case of SrTiO3 the BG for the model I is markedly greater than that for models II and III. The substantial reduction of BG for the TiO2 surface relative to the bulk value is due to an extended shoulder in the valence-band electronic DOS (see below). The same picture has been found in DFT PW calculations [829], in spite of the fact that the LDA gaps are half of others (see Table 11.21). In all figures below the zero energy is taken at the Fermi level of the bulk crystal (SrZrO3 or SrTiO3 ) and all curves were shifted so that the centers of O 1s bands

512

11 Surface Modeling in LCAO Calculations of Metal Oxides

coincide. Also, the DOS values have been reduced to one oxygen atom to ensure the same scale for bulk crystal and different slabs. In Fig. 11.21 the total oxygen DOS for the surface model III and bulk crystal are compared. The bulk and slab VB have similar shapes and widths except the small areas at the top and bottom that reflect the surface contributions. a

b bulk III

bulk III

60

DOS (arb.un.)

DOS (arb.un.)

60

40

40

20

20

0

0 -5

-4

-3

-2

-1

-6

0

-5

-4

E (eV)

-3 -2 -1 E (eV)

0

1

Fig. 11.21. Oxygen-projected VB DOS for bulk crystal and for surface model III (a – SrZrO3 ; b – SrTiO3 )

These contributions are resolved in Fig. 11.22 where the DOS projected to the surface oxygens is plotted. Figures 11.22a and b demonstrate that the oxygen DOS distribution for SrO and TiO2 terminations are qualitatively different, whereas the distinctions between the model types (I and III or II and III) are less significant. a

b

250

250

I (SrO) II (ZrO) III (SrO) III (ZrO)

150

I (SrO) II (TiO) III (SrO) III (TiO)

200

DOS (arb.un.)

DOS (arb.un.)

200

150

100

100

50 0

50 0

-4

-3

-2

E (eV)

-1

0

-5

-4

-3

-2

E (eV)

-1

0

1

Fig. 11.22. Projected VB DOS for oxygen atom in the first surface layer for all three models (a – SrZrO3 ; b – SrTiO3 ). For the model III the first oxygen projection corresponds to the SrO-side and the second to the MO2 -side

It is clearly seen in Fig. 11.22 that the new O-subbands appear in the slabs at the top of the bulk VB. The corresponding peaks for the oxygen on an SrO-terminated SrZrO3 surface (in models I and III) are significantly higher than the peaks for oxygen on ZrO2 -terminated surfaces. Also, the charge of the O atom in the first layer in SrOterminated slab of a SrZrO3 crystal is noticeably lower than its bulk value (1.50 vs.

11.3 Slab Models of SrTiO3 , SrZrO3 and LaMnO3 Surfaces

513

1.33 in Table 11.20). This can be explained by the larger ionicity of the M–O bond in the zirconate than in the titanate. These features allow one to expect that a (001) SrO-terminated surface can accumulate the excess negative charge in the case of SrZrO3 crystal and it should be more basic in nature than a SrO-terminated surface of SrTiO3 crystal. In the case of SrTiO3 slabs the corresponding oxygen contribution to SrO surface states is lower, whereas the new surface states originated from the TiO2 termination form a low but extended shoulder that is alike in models II and III. The indicated shoulder reduces the bulk BG noticeably (see Table 11.21). This means that electronic shells on the TiO2 -terminated SrTiO3 surface are more polarizable than electronic shells on the other surface types regarded. The similarities of the results obtained for the surface energy and DOS from the surface models I and II on the one hand, and from the model III on the other hand confirm the weak interaction between the opposite slab faces if its thickness is sufficiently large, resulting in the mutual independence of two types of termination (SrO and MO2 ) in the surface models of perovskites considered. One can conclude that disagreement between the theory and experiment for the vertical displacements of the SrTiO3 surface atoms does not depend on the actual (LCAO hybrid HF-DFT or PW DFT) ab-initio method used. The dependence on the slab model and thickness may also be excluded from the possible reasons. Most probably, this discrepancy can be explained by the possible surface phase transition or surface reconstruction under the experimental conditions. The ab-initio calculations using the extended tetragonal surface unit cell can resolve the indicated contradiction. The values obtained show that relaxation of the top surface atoms is more prominent in the case of SrZrO3 than in the case of SrTiO3 , and the corresponding surface energy for zirconate is lower by about 0.1 J/m2 . This fact may be attributed to the larger ionicity of SrZrO3 bulk crystal in comparison with SrTiO3 bulk crystal. The results under consideration give evidence that the SrO surface of a SrZrO3 crystal is more basic than the SrO surface of a SrTiO3 crystal. Based on this conclusion one can suppose, for example, a stronger interaction of oxygen atoms on the SrO surface with the H atoms of the adsorbed water molecules (with possible water ionization) occurs in the case of zirconate than in the case of titanate. 11.3.2 F Center on the SrTiO3 (001) Surface In Sect. 10.3.1 we considered the calculations of the oxygen vacancy in a bulk SrTiO3 crystal (bulk F centers). The atomic and electronic structure of surface F centers is practically unknown. Only a few theoretical papers deal with the analysis of the F centers on the TiO2 terminated SrTiO3 (001) surface: one of them is based on semiempirical INDO calculations [846] and another one on GGA and LDA+U slab calculations [847]. In both papers, the structure of the F centers was studied for very high defect concentrations as the small 2D supercells were used. It has been demonstrated above in the bulk F center calculations that the results for low defect concentrations might be significantly different from those corresponding to the infinite dilution limit. Moreover, it is very likely that in the calculations [846] both lattice relaxation and vacancy-formation energies are not converged to the infinite dilution limit and no surface defect-migration energies were presented.

514

11 Surface Modeling in LCAO Calculations of Metal Oxides

In [848] the surface F centers on the TiO2 -terminated unreconstructed (001)SrTiO3 surface are studied in more detail by the DFT method. A stoichiometric slab containing six atomic TiO2 and SrO planes (6 bulk unit cells , i.e. 30 atoms) has been chosen as a material model. The surface F center was studied for 2D supercells 2 × 2(120 atoms) and 3 × 3(270 atoms). The formation energy for relaxed (unrelaxed) surface oxygen vacancies was found to be 6.22 eV (8.86 eV) and 5.94 eV (8.81 eV) for 120atom and 270-atom supercells, respectively. Again, one must be aware of the fact that the present values might not be completely converged to the infinite-dilution limit. This surface vacancy-formation energy could be compared to the 7.73 eV and 7.17 eV formation the relaxed F centers in the bulk, calculated for the bulk √ energies √ for √ supercells n 2 × n 2 × n 2, n = 2, 3, with similar interdefect distances along the z axis. The conclusion could be drawn that the defect-formation energy on the TiO2 terminated surface is considerably smaller than in the bulk; it is roughly reduced by 1.5 eV or 20–25%. This is similar to what has been obtained for other oxides and it is due to the reduced coordination at the surface, [850]. The following relaxation of the atoms nearest to the vacancy and in the Ti–O–Ti surface chain is reported in [848]. The Ti and O nearest neighbors of the vacancy are displaced by 7%a0 and 4%a0 , respectively (a0 is the parameter of bulk cubic lattice). The former displacements exceed by a factor of two those in the bulk and result from the half-coordination sphere left when the surface is formed. Unlike the bulk, where atoms move towards and outwards from the O vacancy, on the surface the direction of atomic displacements is more complicated. A well-pronounced strong anisotropy in the atomic displacements along the Ti − VO − Ti axis was clearly observed. Atomic displacements in the smaller supercell show a nonmonotonic decay with the distance from the vacancy that is caused by the interference effects on the border of the nearest supercells and demonstrates that this supercell is not big enough to avoid defect–defect interactions on the surface. The calculated activation energy for defect migration for the two supercells of 120 and 270 atoms is 0.19 and 0.11 eV, respectively. This demonstrates that (i) an increase of the distance between defects reduces the migration energy (due to the reduced repulsion energy between periodically distributed defects), and (ii) compared to the bulk migration, the defect-migration energy on the perovskite surface is largely reduced. This is in line with the calculations of the F-center migration on the MgO surface where the activation energy obtained was also considerably smaller than in the bulk [850]. In addition, high vacancy mobility makes the surface reconstruction easier to see in the experiments. The difference electronic density map for the surface F center on the 2 × 2 × 3 slab shows that the electronic density around it is more delocalized than that corresponding to the bulk F center. The calculated Bader effective charges of the two nearest Ti atoms give an electronic density increase of 0.4 e per atom, whereas the rest of the missing O charge is spread in the vicinity of the vacancy. Finally, the defect ionization energy of the surface F center is almost half that in the bulk (0.25 eV vs. 0.49 eV). Its √ dispersion still not negligible (0.14 eV), being comparable with that √ is √ for the bulk 2 2 × 2 2 × 2 2 supercell (0.15 eV). The single bulk F center in SrTiO3 is a small-radius defect. The surface F center is predicted to be more delocalized than that in the bulk. This is in agreement with previous findings for ionic oxides such as MgO, [850] or Al2 O3 [849] and results from the reduced Madelung potential and atomic coordination at the surface.

11.3 Slab Models of SrTiO3 , SrZrO3 and LaMnO3 Surfaces

515

The oxygen vacancies on the SrTiO3 (001) surface essentially change its properties and they have to be taken into account when adsorption modeling. Unfortunately, the surface-defect calculations in the slab model are complicated due to the delocalized nature of the surface oxygen vacancy electron states. Such a study requires both sufficiently thick slabs (in modeling the surface) and large 2D supercells (in modeling the single vacancy on the surface). While the theoretical study of the atomic and electronic structure of titanate surfaces is active, for manganites such a study began only in 2004, as is seen in the next section. 11.3.3 Slab Models of LaMnO3 Surfaces Of primary interest for fuel-cell applications are the LaMnO3 (LMO) surface properties, e.g. the optimal positions for oxygen adsorption, its surface transport properties, as well as the charge-transfer behavior. In fuel-cell applications, the operational temperature is so high (T > 800 K) that the LMO unit cell is cubic and thus Jahn–Teller (JT) lattice deformation around Mn ions and related magnetic and orbital orderings no longer take place. The first ab-initio calculation of cubic LaMnO3 surface properties [851] has been made by the HF LCAO method for (110) LMO surface in the single-slab model. The extension of these calculations to the (001) LMO surface was made in [852]. The bulk cubic unit cell atoms are distributed over atomic planes (normal to the surface direction) in the following way: for the (110) surface – O2 –LaMnO–O2 –LaMnO · · · ; for the (001) surface – LaO–MnO2 –LaO–MnO2 · · · (see Fig. 11.4). In both cases the surfaces are polar. In LMO (110) surface calculations [851] the O2 -terminated slab consisting of seven planes was taken, i.e. four O2 planes and three LaMnO planes. Such a symmetrical slab is nonstoichiometric, i.e. it does not consist of an integer number of formula units. To restore the stoichiometry of the 7-plane slab, one oxygen atom has been removed from both O2 -planes terminating the slab, i.e. the slab of three bulk primitive unit cells with periodically repeated surface oxygen vacancies was used. Such an approach is justified since it is well known that the polar surfaces are stabilized by surface defects and surface-atom relaxation. The surface energy Es (per surface unit cell) for such a slab equals:

1 slab Es = − 3Ebulk (11.12) E 2 O slab and Ebulk are the total energies for the O-terminated slab and bulk unit where EO cells, respectively. On the other hand, the defectless surfaces could be modeled using nonstoichiometric slabs: O2 -terminated or LaMnO-terminated. In this case the surface energy Es could be calculated as the average:

Es =

1 slab slab − 7Ebulk EO2 + ELMO 4

(11.13)

slab slab and ELMO are the total energies of the slabs with O2 and LaMnO termiwhere EO 2 nations, respectively. The comparison of energies for the stoichiometric and nonstoichiometric 7-plane slabs permits conclusions to be drawn on the role of surface oxygen vacancies in

516

11 Surface Modeling in LCAO Calculations of Metal Oxides

surface stabilization. The O-terminated slab consists of three Mn-containing planes, each Mn atom is supposed to have oxidation state +3, i.e. 4 valence electrons are localized on Mn3+ ions. The UHF LCAO calculations have been performed for both the FM (the number of α − β electrons is 3 × 4 = 12) and the AFM (α − β = 4 electrons) states. Since the SCF calculations of these slabs are extremely slow and timeconsuming, to a first approximation, the relaxed surface geometry optimized by means of the classical shell model [853] based on atom–atom potentials has been used. Since one of the two surface O atoms (per 2D unit cell) is removed, the remaining atoms reveal displacements not only perpendicularly to the surface, but also inplane. In slab calculations [852] the displacements in the first two top planes were taken into account, which are considerably larger than those in deeper planes. Similar to the bulk calculations, the FM stoichiometric (110) slab for the O termination turns out to be energetically more favorable than AFM, by 0.9 eV per Mn. The calculated Oterminated surface energy is 3.5 eV for the unrelaxed slab and 0.7 eV for the relaxed one, i.e. the relaxation energy (per surface unit cell) is 2.8 eV. Table 11.22. The effective atomic charges Q(|e|) in four unrelaxed top layers of the LMO (110) surface, both stoichiometric O-terminated (Q1 ), and nonstoichiometric O2 - and LaMnO-terminated (Q2 and Q3 ), as well as the relevant deviations of plane charges, ∆Q(|e|) from those in the bulk (Q(La)=2.56; Q(Mn)=2.09; Q(O)=–1.55) Plane Atom Q1 ∆Q1 Q2 ∆Q2 Q3 I O –1.16 0.39 –0.77 1.56 –1.86(O) 1.73 (La) 1.83 (Mn) II La 2.45 –0.06 2.52 –0.06 –1.67 (O) Mn 2.19 2.10 O –1.60 –1.58 III O –1.66 –0.16 –1.58 –0.06 –1.69 (O) O –1.60 –1.58 2.56 (La) 2.40 (Mn) IV La 2.54 –0.35 2.55 0.18 –1.63 (O) Mn 1.87 2.31 O –1.66 –1.58

∆Q3 –1.40

–0.24

0.17

–0.16

Table 11.22 shows the effective atomic charges Q of slab atoms and the deviation of the plane charges ∆Q (per unit cell) from those calculated with the bulk atomic charges. For example, in the plane II for the O-terminated stoichiometric surface the effective charge of the La deviates from that in the bulk by 2.45 e – 2.56 e= –0.11 e. The effective charges of Mn and O deviate from those in the bulk by 0.1 e and – 0.05 e, respectively. That is, the LaMnO plane’s charge deviates from that in the bulk by –0.06e. This value characterizes the charge redistribution in near-surface planes compared to the bulk. For stoichiometric surfaces the sum of ∆Q over all planes is zero. Thus, the effective charge of a surface O atom is considerably reduced with respect to that in the bulk. The charges of both metal atoms in the second plane are slightly more positive, which is almost compensated by the charge of a more negative

11.3 Slab Models of SrTiO3 , SrZrO3 and LaMnO3 Surfaces

517

O atom. Charges of the two O atoms in the third plane are close to those in the bulk. Surprisingly, in the central, fourth plane, the Mn charge turns out to be considerably (by 0.22 e) less positive than in the bulk. This is enhanced by the same trend for the O atoms, which results in a considerable (–0.35 e) effective charge of the central plane with respect to the bulk. The calculation for the surface energy for the 7-plane nonstoichiometric slabs, obtained using (11.13), gives Es =6.8 eV, i.e. about a factor of two larger than the surface energy of the stoichiometric slab. This demonstrates that oxygen vacancies strongly stabilize the polar (110) surface. The charge distribution for the nonstoichiometric O− 2 and LaMnO-terminated surfaces is summarized in Table 11.22. As one can see, the effective charge of Mn in the central plane of the O2 -terminated surface with respect to the bulk value is –0.22 e, i.e. the same in absolute value but with the opposite sign to that on the O-terminated surface. The two surface O atoms share nearly the same charge as a single O atom possesses on the stoichiometric surface. Other planes are only slightly perturbed. Since the O2 - and LaMnO-terminated surfaces complement each other, their total charges (with respect to those in the bulk) are expected to be equal in magnitude but of the opposite signs, which indeed takes place. Calculations for the asymmetric, 8-plane stoichiometric LaO · · · MnO2 slab show that the surface energy is larger by 1 eV than that for the stoichiometric 7-plane slab with surface vacancies. This means that the surface vacancies serve as a better stabilizing factor than the charge redistribution near the surface compensating for the macroscopic dipole moment. From the relevant charge redistribution one can see that both surfaces of this 8-plane slab, the O2 - and LaMnO-terminated ones, are charged strongly positively with respect to the bulk charges, whereas the internal planes are charged mostly slightly negatively. The LMO (001) surface was modeled in [852] by similar symmetric 7-plane slabs with two kinds of terminations (LaO · · · LaO and MnO2 · · · MnO2 ) and an 8-plane LaO · · · MnO2 slab. The former is nonstoichiometric, the latter is stoichiometric (four bulk unit cells per surface unit cell). Unlike the (110) O-terminated surface, it is not easy to make the 7-plane (001) slab stoichiometric through introduction of surface vacancies. If we count the formal ionic charges, La3+ , Mn3+ , O2− , these two slabs have the total charges of 1 e (LaO) and –1 e (MnO2 ). In the SCF calculations, slabs are assumed to be neutral by definition, which results in the electronic-density redistribution between atoms in different planes. The calculated defectless surface energy for the (001) using (11.13) equals 2.04 eV. This is smaller by a factor of 3 than that for a similar nonstoichiometric (110) surface. Analysis of the charge redistribution for the LaO- and MnO2 -terminated (001) surfaces shows that the largest charge perturbation with respect to the bulk charges is observed for the top and bottom planes, similarly to the (110) case. The deviations of the effective atomic charges starting the second plane are quite small, of the order of 0.1–0.2 e. These two surface terminations are complementary, which is why the total charges of the LaO- and MnO2 -terminated slabs are equal in absolute values and have opposite signs of –1 e and 1 e, respectively. As to the use of the asymmetric, stoichiometric 8-plane slab LaO · · · MnO2 , its main problem was believed to arise due to the macroscopic polarization caused by a dipole moment perpendicular to the surface as a consequence of the alternating oppositely charged (1 e, –1 e) planes.

518

11 Surface Modeling in LCAO Calculations of Metal Oxides

However, as was demonstrated for the SrTiO3 (110) polar surface [854], the charge redistribution near the surface is able to cancel the macroscopic surface polarization. For this, the absolute value of the effective charge of the top plane should be smaller than that in the slab center. As was found in [852], the effective charge of the fourth MnO2 -plane of the 8-plane slab is –0.86 e, whereas that of the top LaO-plane 0.37 e, i.e. the condition is fulfilled and the (001) plane is stable. The same is true for the 8-plane (110) slab. For the 8-plane (001) slab only the top and bottom planes of a slab are considerably perturbed as compared to the bulk charges, charges in all the other planes are only slightly modified. The effective charges of the LaO and MnO2 (top and bottom) planes are close in magnitude and opposite in sign. The relevant surface energy calculated using (11.2) turns out to be as small as 1.02 eV/cell for the FM state. This means that the (001) surface is stable and energetically favorable. The (0 0 1) surface energy in the AFM state is formally even lower, 0.83 eV. However, the relevant total energies for the bulk unit cell (per formula unit) and the slab in the AFM state are higher (by 0.22 and 0.56 eV, respectively) than the FM states. The LCAO single-slab calculations [852] of the electronic structure of the polar LnMnO3 (001) and (110) surfaces clearly demonstrate that the stoichiometric slabs have considerably lower energies than the nonstoichiometric ones. It should be stressed that the structural oxygen vacancies are energetically required and hence are essential elements of the (110) polar surface structure. Their formation makes the (110) slabs stoichiometric and energetically more favorable than the stoichiometric slabs stabilized by the near-surface electronic density redistribution necessary to compensate the macroscopic dipole moment perpendicular to the asymmetric LaO · · · MnO2 surfaces. The comparative DFT B3PW LCAO (single-slab) and GGA PW (periodic-slab) calculations of LaMnO3 (001) and (110) surfaces in slab models has been made in [855], we refer the reader to this publication for details of the calculations. It is important that the B3PW LCAO and GGA PW calculations for the LaMnO3 surfaces show reasonable agreement for atomic displacements, effective charges (in the PW calculations, Bader analysis was used), and surface energies. The effective charges of surface atoms markedly depend on the surface relaxation and less on the particular (FM or AAF) magnetic configuration. The HF-based conclusion (see discussion above) that the polar (001) surface is energetically more favorable than the (110) one was confirmed. This conclusion is important for the modeling of surface adsorption and LaMnO3 reactivity. The surface relaxation energy is typically of the order of 1–1.5 eV (per square unit a2 , where a is the cubic lattice parameter) i.e. much larger than the tiny difference between various magnetic structures. Moreover, the calculated surface energy for the slab built from orthorhombic unit cells is close to and even slightly larger than that for the cubic unit cells. These two facts justify the use in surface and adsorption modeling of slabs built from the cubic cells. This is a very important observation since the detailed adsorption and migration modeling, e.g., for surface O atoms at moderate coverages that is relevant for fuel-cell applications, is very time consuming even for the smallest slab thicknesses. The discussion of LMO surface modeling concludes Part II (Applications) of this book. We tried to demonstrate, via numerous examples, the efficiency of modern quantum-chemical approaches to calculate the properties of crystalline solids – bulk and defective crystals, surfaces and adsorption.

11.3 Slab Models of SrTiO3 , SrZrO3 and LaMnO3 Surfaces

519

The list of computer programs used in LCAO (both ab-initio and semiempirical) calculations of periodic systems is given in Appendix C.

A Matrices of the Symmetrical Supercell Transformations of 14 Three-dimensional Bravais Lattices

A.1. The triclinic crystal system (i) l(P,P) is an arbitrary integer matrix. A.2. The monoclinic crystal system ⎞ ⎛ n 1 n5 0 (A.1) (i) l(P,P)= ⎝ n4 n2 0 ⎠ , L = (n1 n2 − n4 n5 )n3 ; 0 0 n3 ⎞ ⎛ n1 n 5 0 (ii) l(A,P)= ⎝ n4 n2 −n3 ⎠ , L = 2(n1 n2 − n4 n5 )n3 ; n4 n2 n3 ⎞ ⎛ n1 n4 n4 (iii) l(P,A)= ⎝ n5 n2 n2 ⎠ , L = 2(n1 n2 − n4 n5 )n3 ; 0 −n3 n3 ⎞ ⎛ n5 n1 n5 (iv) l(A,A)= ⎝ n4 n2 + n3 n2 − n3 ⎠ , L = 4(n1 n2 − n4 n5 )n3 ; n4 n 2 − n 3 n 2 + n 3 A.3. The hexagonal crystal ⎞ system ⎛ n1 0 0 (i) l(1) (P,P)= ⎝ 0 n1 0 ⎠ , 0 0 n2 ⎞ ⎛ n1 −n1 0 (ii) l(2) (P,P)= ⎝ n1 2n1 0 ⎠ , 0 0 n2

L = n21 n2 ;

A.4. The rhombohedral crystal system ⎞ ⎛ n2 n1 + n2 n 2 (i) l(R,R)= ⎝ n2 n1 + n2 n2 ⎠ , n2 n 2 n 1 + n2

(A.2)

L = 3n21 n2 ;

L = n21 (n1 + 3n2 );

522

A Matrices of the Symmetrical Supercell Transformations of 14 Three-dimensional Bravais Lattices

A.5. The orthorhombic crystal system (i) l(P,P) coincides with (A.1); ⎞ ⎛ n1 −n2 0 (ii) l(C,P)= ⎝ n1 n2 0 ⎠ , L = 2n1 n2 n3 ; 0 0 n3 ⎞ ⎛ 0 n2 n3 (iii) l(F,P)= ⎝ n1 0 n3 ⎠ , L = 2n1 n2 n3 ; n1 n2 0 ⎞ ⎛ −n1 n2 n3 (iv) l(I,P)= ⎝ n1 −n2 n3 ⎠ , L = 4n1 n2 n3 ; n1 n2 −n 3 ⎞ ⎛ n1 n1 0 (v) l(P,C)= ⎝ −n2 n2 0 ⎠ , L = 2n1 n2 n3 ; 0 0 n3 ⎞ ⎛ n1 n 2 0 (vi) l(C,C)= ⎝ n2 n1 0 ⎠ , L = (n21 − n22 )n3 ; 0 0 n3 ⎞ ⎛ n1 n1 0 (vii) l(A,C)= ⎝ −n2 n2 −n3 ⎠ , L = 4n1 n2 n3 ; −n2 n2 n3 ⎛ ⎞ n2 n3 −n2 n1 n3 ⎠ , (viii) l(F,C)= ⎝ n1 L = 4n1 n2 n3 ; n n 1 − n2 n1 +⎞ 2 0 ⎛ −n1 −n2 n3 (ix) l(I,C)= ⎝ n1 n2 n3 ⎠ , L = 2(n21 − n22 )n3 ; n2 n1 −n3 ⎞ ⎛ −n1 n1 n1 (x) l(P,F)= ⎝ n2 −n2 n2 ⎠ , L = 4n1 n2 n3 ; n3 n3 −n3 ⎞ ⎛ −n1 n1 n2 (xi) l(C,F)= ⎝ −n2 n2 n1 ⎠ , L = 2(n21 − n22 )n3 ; n n −n3 ⎞ ⎛3 3 n2 + n3 −n2 + n3 n2 − n3 L = n1 n2 n3 ; n1 , n2 , n3 are of (xii) l(F,F)= 12 ⎝ −n1 + n3 n1 + n3 n1 − n3 ⎠ , −n1 + n2 n1 − n2 n1 + n2 the same parity; ⎞ ⎛ −n3 −n2 n1 + n2 + n3 ⎠, −n3 n 1 + n 2 + n3 −n1 (xiii) l(I,F)= ⎝ −n2 −n1 n1 + n2 + n3 L = 2[(n1 +⎞n2 + n3 )(n1 n2 + n2 n3 + n3 n1 ) − n1 n2 n3 ]; ⎛ 0 n1 n 1 (xiv) l(P,I)= ⎝ n2 0 n2 ⎠ , L = 2n1 n2 n3 ; n n 0 ⎞ ⎛ 3 3 −n2 n1 n1 − n2 (xv) l(C,I)= ⎝ n2 n1 n1 + n2 ⎠ , L = 4n1 n2 n3 ; n3 n3 0

A Matrices of the Symmetrical Supercell Transformations of 14 Three-dimensional Bravais Lattices





n2 n2 + n 3 n 3 n3 n1 + n3 n1 ⎠ , L = 4n1 n2 n3 ; n2 n1 n1 + n2 ⎞ ⎛ n2 + n3 −n1 + n3 −n1 + n2 L = n1 n 2 n 3 ; 1 ⎝ n1 , n2 , n3 are of (xvii) l(I,I)= 2 −n2 + n3 n1 + n3 n1 − n2 ⎠ , n2 − n3 n1 − n3 n1 + n2 the same parity;

(xvi) l(F,I)= ⎝

A.6. The tetragonal crystal system (i) l(1) (P,P) coincides with (A.2); ⎞ ⎛ n1 −n1 0 (2) (ii) l (P,P)= ⎝ n1 n1 0 ⎠ , L = 2n21 n2 ; 0 0 n2 ⎛ ⎞ 0 n1 n2 n2 ⎠ , (iii) l(1) (I,P)= ⎝ n1 L = 2n21 n2 ; n1 n1 0 ⎞ ⎛ −n1 n1 n2 (iv) l(2) (I,P)= ⎝ n1 −n1 n2 ⎠ , L = 4n21 n2 ; n n − 1 −n 1 2 ⎛ ⎞ 0 n1 n1 (v) l(1) (P,I)= ⎝ n1 0 n1 ⎠ , L = 2n21 n2 ; n n 0 ⎛ 2 2 ⎞ −n1 n1 0 (2) (vi) l (P,I)= ⎝ n1 n1 2n1 ⎠ , L = 4n21 n2 ; ⎞ ⎛ n2 n2 0 n1 n1 + n 2 n 2 (vii) l(1) (I,I)= ⎝ n2 n1 + n2 n1 ⎠ L = 4n21 n2 ; n n 2n 1 1 ⎛ 1 ⎞ n1 + n2 −n1 + n2 0 L = n21 n2 ; 1 ⎝ (2) ⎠ n1 , n2 are of (viii) l (I,I)= 2 −n1 + n2 n1 + n2 0 n1 − n2 n1 − n2 2n1 the same parity; A.7. The cubic crystal system ⎛ ⎞ n0 0 (i) l(P,P)=l(F,F)=l(I,I)=⎝ 0 n 0 ⎠ , 0 0n ⎛ ⎞ 0nn (ii) l(F,P)=l(P,I)= ⎝ n 0 n ⎠ , nn0 ⎛ ⎞ −n n n (iii) l(I,P)=l(P,F)= ⎝ n −n n ⎠ , n n −n ⎛ ⎞ 3n −n −n (iv) l(I,F)= ⎝ −n 3n −n ⎠ , ⎛ −n −n 3n ⎞ 2n n n (v) l(F,I)= ⎝ n 2n n ⎠ , n n 2n

L = n3 ;

L = 2n3 ;

L = 4n3 ;

L = 16n3 ;

L = 4n3 .

523

B Reciprocal Matrices of the Symmetric Supercell Transformations of the Three Cubic Bravais Lattices

⎞ ⎞ ⎛ ⎞ ⎛ −1 1 1 011 100 Q1 = ⎝ 0 1 0 ⎠ Q2 = ⎝ 1 −1 1 ⎠ Q3 = ⎝ 1 0 1 ⎠ 110 001 1 1 −1 ⎛ ⎛ ⎞ ⎞ 211 3 −1 −1 Q4 = ⎝ 1 2 1 ⎠ Q5 = ⎝ −1 3 −1 ⎠ −1 −1 3 112 ⎛

C Computer Programs for Periodic Calculations in Basis of Localized Orbitals

The information about computer programs applied in molecular quantum chemistry and materials science can be found on different Internet sites [856–858]. In particular, on site [856] on-line links are given to the appropriate information. The majority of the existing computer codes for calculations of periodic systems can be divided into two main groups: LO codes using a basis set of localized orbitals (LO) and PW(APW) codes using plane waves (PW) or augmented plane waves (APW) as a basis set. The only exclusion is the hybrid Gaussian LO and PW (GPW) DFT code QIUCKSTEP/CP2K [859]. The sites mentioned include references to both LO and PW codes. The information about periodic codes using LO or PW bases can also be found in [568, 860]. Here, we restrict ourselves only to brief information about computer codes for periodic LO calculations (see Table C.1). The indication of the corresponding homepage and references on the publications are given in the last two columns of Table C.1. Both ab-initio (HF,DFT (LDA,GGA), hybrid HF-DFT, time-dependent DFT (TDFT)) and semi-empirical (SE) codes are included in the list. The codes listed allow all-electron (AE) calculations (also termed full potential-FP) or valence-only ones with the use of pseudopotential (PP) for core electrons or both. For the localized basis we use the acronyms GTO (Gaussian-type orbitals), STO (Slater-type orbitals) and NTO (numerical type orbitals). In particular, f -GTO and f -polarization-GTO mean the possibility to make full GTO calculations for f -elements or the simple extension of Gaussian basis-sets to include f -polarization basis-functions, respectively. In the remaining cases only s, p and d orbitals can be used in the basis set. The geometry optimization can be made over the atomic coordinates only (GO) or including both the lattice parameters optimization (full GO). Some codes allow linear scaling (O(N )) with the basis-set size and molecular-dynamics (MD) calculations. The semiempirical codes can allow the band structure calculations for nonzero wave vectors (BAND) or the cyclic-cluster model (CCM) without the BZ summation can be used. The CRYSTAL suite remains the mostly advanced and developing LCAO periodic program, compared to other codes listed in Table C.1. We refer the reader to the calculations of metal-organic frameworks (MOF), [872] as a case study showing that the CRYSTAL program allows reliable ab-initio prediction of materials properties of complex systems to be made. Note that from January 1st, 2007, CRYSTAL03 will not be supported any more.

528

C Computer Programs for Periodic Calculations in Basis of Localized Orbitals Table C.1. List of periodic computer programs using localized orbitals basis

No Program 1 CRYSTAL03

Description Web site Refs HF;DFT (LDA,GGA); www.crystal.unito.it [568, 860–863] Hybrid HF-DFT; AE; www.cse.clrc.ac.uk/cmg PP; GTO; GO 2 CRYSTAL06 + f -polarization-GTO, full GO, www.crystal.unito.it/ vibrational frequences home.html 3 CRYSCOR + MP2 correlation www.crystal.unito.it [201] 4 GAUSSIAN03 HF;DFT (LDA,GGA); www.gaussian.com [379] PHF; Hybrid HF-DFT; AE; PP;f -GTO; GO;O(N) 5 ADF2006 DFT (LDA,GGA); /www.scm.com/Doc/ [864] (BAND) Hybrid HF-DFT; Doc2006.01 TD-DFT; AE; STO; 6 SIESTA DFT (LDA,GGA);PP; www.uam.es/ [400] NTO; GO; MD ;O(N) departamentos/ ciencias/ fismateriac/siesta 7 AIMPRO DFT(LDA,GGA); PP; http://newton/ex/ [555] LGTO ac.uk/research 8 SEQUEST DFT (LDA, GGA);PP; http://dft.sandia. [865] GTO;O(N);GO gov/Quest 9 DMOL3 DFT (LDA, GGA);AE; http://people.web.psi.ch/ [866] NTO; GO delley/dmol3.html 10 FPLO DFT (LSDA,LSDA+U); www.fplo.de [867] AE; LO; 11 PLATO DFT (LDA); www-staff.lboro.ac.uk [868] NTO;GO / masdk/plato.html 12 QUICKSTEP/ DFT(LDA,GGA); http://cp2k.berlios.de [859] CP2K PP;GTO/PW 13 CNDO 4.0 SE,BAND,GE www.wgc.chem.pu.ru [869] / valera/cndo/manual.html 14 MOPAC2002 SE,BAND,GE www.cachesoftware. [312, 870] com/mopac 15 MSINDO SE,CCM,STO,GO,MD www.theochem. uni-hannover.de/ [256] Bredow/MSINDO 16 SOLID2000 SE,CCM,QR-INDO, www.stech.sk/stech [307] STO,GO soft/htm 17 SYM-SYM SE,CCM,INDO,GO www.cmmp.ucl.ac.uk [871] / lev/recearc4/node8.html

C Computer Programs for Periodic Calculations in Basis of Localized Orbitals

529

The reader can also find useful such codes as XCrysDen( [873], GULP( [875] and BAND-GUI( [345]. XCrysDen program can be used as a graphical user interface (GUI) for the CRYSTAL95/98/03/06 programs. The advantage of the GUI is its rendering possibility, which yields graphical feedback to the user. Every manipulation of the structure is visualized immediately and to enhance the usefulness of XCrySDen even further, an UNDO/REDO option is available, which makes every false move recoverable. Several graphical procedures make the manipulation of the atomic structures easier, while other graphical functions are suitable for checking the geometry of the structure. This program uses the ease of a GUI and the flexibility of manual editing and allows the user to view and edit the input scripts for the CRYSTAL programs on request. Immediately after the manual editing is completed the program visualizes the result. We refer the reader for details to the program description [874]. GULP is a program for performing a variety of types of simulation on materials using boundary conditions of 0D (molecules and clusters), 1D (polymers), 2D (surfaces, slabs and grain boundaries), or 3D (periodic solids). The focus of the code is on analytical solutions, through the use of lattice dynamics, where possible, rather than on molecular dynamics. A variety of force fields can be used within GULP spanning the shell model for ionic materials, molecular mechanics for organic systems, and the embedded-atom model for metals. Analytic derivatives are included up to at least second order for most force fields, and to third order for many. ADF2006.01 is the first ADF release containing a graphical user interface for the BAND program. BAND input also enables inexperienced ADF-BAND users to easily create BAND jobs. You can use BAND input to define your periodic structure (geometry), and to set details of your BAND job using an easy-to-use graphical user interface. BAND input will generate the complete job script for you. This script takes care of running BAND. You can also use BAND input to run these script files on your local machine in the background.

References

1. R. Dronskowski, Computational Chemistry of Solid State Materials. A Guide for Materials Scientists, Chemists, Physicists and Others (Wiley-VCH, Weinheim, 2005) 2. C.M. Quinn, An Introduction to Quantum Chemistry of Solids (Clarendon Press, Oxford, 1973) 3. A.A. Levin, Solid State Quantum Chemistry (McGraw-Hill, New York, 1977) 4. Ab-initio Calculations of the Properties of Crystalline Materials, ed. C. Pisani, Lecture Notes in Chemistry 67 (Springer Verlag, Berlin, 1996) 5. P. Fulde, Electron Correlations in Molecules and Solids, 3rd edn. Springer Series in Solid State Sciences 100 (Springer, Berlin Heidelberg New York, 1995) 6. W. Harrison, Electronic Structure and Properties of Solids: Physics of the Chemical Bond, 2nd edn. (Dover, New York, 1989) 7. R. Hoffmann, Solids and Surfaces: A Chemist View on Bonding in Extended Structures (Weinheim VCH, 1988) 8. M. Springborg, Methods of Electronic Structure Calculations (Wiley, 2000) 9. E. Kahiras, Atomic and Electronic Structure of Solids (Cambridge University Press, Cambridge, 2003) 10. R. Martin, Electronic Structure. Basic Theory and Practical Methods (Cambridge University Press, Cambridge, 2004) 11. L. Kantorovich, Quantum Theory of the Solid State (Kluwer Academic Publishers, Dordrecht, 2004) 12. K. Ohno, R. Esfarjani, Y. Kawazoe, Computational Materials Science, Springer Series in Solid State Sciences, 129 (Springer, Berlin Heidelberg New York, 1999) 13. R.A. Evarestov, V.P. Smirnov, Site Symmetry in Crystals: Theory and Applications, 2nd edn. Springer Series in Solid State Sciences, 108 (Springer, Berlin Heidelberg New York, 1997 ) 14. R.L. Flurry, Symmetry Groups. Theory and Chemical Applications (Prentice-Hall, Englewood Cliffs, NJ, 1980) 15. P.W.M. Jacobs, Group Theory with Applications in Chemical Physics (Cambridge University Press, New York, 2005) 16. Bilbao Crystallographic Server, http://www.cryst.ehu.es/ 17. A.P. Cracknell, B.L. Davies, S.C. Miller, W.F. Love, Kronecker Product Tables, 1 General Introduction and Tables of Irreducible Representations of Space Groups (IFI/Plenum, New York-Washington-London, 1979) 18. M.I. Petrashen, E.D. Trifonov, Applications of Group Theory in Quantum Mechanics (M.I.T. Press, Massachusetts, 1969)

532

References

19. International Tables for Crystallography, ed. T.Hahn, A Space-group symmetry (Reidel, Dordrecht, 1983 ) 20. http://cst-www.nrl.navy.mil/lattice/ 21. http://cst-www.nrl.navy.mil/lattice/others.html 22. Inorganic Crystal Structure Database (ICSD), http://www.fiz-informationsdienste. de/en/DB/icsd/ 23. V.R. Saunders, R. Dovesi, C. Roetti, R. Orlando, C.M.Zicovich-Wilson, N.M.Harrison, CRYSTAL-2003 Users Manual, University of Torino, Torino, 2003; http://www.crystal.unito.it 24. Richard J.D. Tilley, Crystals and Crystal Structures (Wiley, 2006) 25. A. Munoz, J.A. Alonso, M.J. Martinez-Lope, M.T. Casais, J.L. Martinez, M.T. Fernandez-Diaz, Phys. Rev. B 62, 6498 (2000) 26. John Z.H. Zhang, Theory and Application of Quantum Molecular Dynamics (World Scientific Publishing Co., Singapore, 1999) 27. G.L. Bir, G.E. Pikus, Symmetry and Strain-induced Effects in Semiconductors (Wiley, New York, 1972) 28. C. Zicovich-Wilson, R. Dovesi, Int. J. Quantum Chem. 67, 299 (1998) 29. C. Zicovich-Wilson, R. Dovesi, Int. J. Quantum Chem. 67, 311 (1998) 30. C.J. Bradley, A.P. Cracknell, The Mathematical Theory of Symmetry in Solids (Clarendon, Oxford, 1972) 31. O.V. Kovalev, Representations of the Crystallographic Space Groups: Irreducible Representations, Induced Representations and Corepresentations, 2nd edn. ed. by H.T. Stokes, D.M. Hatch (Gordon and Breach, Philadelphia, PA 1993) 32. I. Shur, J.F.Math. 139, 155 (1911) 33. G.Ya. Lyubarskii, The Application of Group Theory in Physics (Pergamon, Oxford, 1960) 34. C.Herring, J. Franklin Inst. 233, 525 (1942) 35. M.W. Schmidt, K.K. Baldridge, J.A. Boatz, S.T. Elbert, M.S. Gordon, J.H. Jensen, S. Koseki, N. Matsunaga, K.A. Nguyen, S. Su, T.L. Windus, M. Dupuis, J.A.J.Jr. Montgomery, J. Comput. Chem. 14, 1347 (1993) 36. C. Edmiston, K. Ruedenberg, Rev. Mod. Phys. 35, 457 (1963) 37. J. Pipek, P.G. Mezey, J. Chem. Phys. 90, 4916 (1989) 38. S.F. Boys, Rev. Mod. Phys. 32, 296 (1960) 39. J. Zak, Phys. Rev. B 23, 2824 (1981) 40. H. Bacry, L. Michel, J. Zak, Lect. Notes Phys. 313, 291 (Springer, Berlin, Heidelberg, 1988) 41. M. Sch¨ utz, G. Hetzer, H.-J. Werner, J. Chem. Phys. 111, 5691 (1999) 42. V.P. Smirnov, D.E. Usvyat, Phys. Rev. B. 64, 245108 (2001) 43. G. Wannier, Phys. Rev. 52, 191 (1937) 44. W. Kohn, Phys. Rev. 115, 809 (1959) 45. J. Des Cloizeaux, Phys. Rev. 135, A698 (1964) 46. N. Marzari, D. Vanderbilt, Phys. Rev. B, 56, 12847 (1997) 47. V.P. Smirnov, R.A. Evarestov, D.E. Usvyat, Int. J. Quantum. Chem. 88, 642 (2002) 48. B. Sporkmann, H. Bross, Phys. Rev. B. 49, 10869 (1994) 49. A. Shukla, M. Dolg, P. Fulde, H. Stoll, Phys. Rev. B. 60, 5211 (1999) 50. S. Goedecker, Rev. Mod. Phys. 71 , 1085 (1999) 51. I. Souza, R.M. Martin, N. Marzari, X. Zhao, D. Vanderbilt, Phys. Rev. B. 62 , 15505 (2000) 52. P.Y. Yu, M. Cardona, Fundamentals of Semiconductors. Physics and Materials Properties, 3rd rev. and enlarged edn. (Springer, Berlin, Heidelberg, 2005) 53. C.M. Zicovich-Wilson, R. Dovesi, V.R. Saunders, J. Chem. Phys. 115, 9708 (2001) 54. I. Mayer, G. Rather, S. Suhai, Chem. Phys. Lett. 293, 81 (1998)

References 55. 56. 57. 58. 59. 60. 61. 62. 63. 64. 65. 66. 67. 68. 69. 70. 71. 72. 73. 74. 75. 76. 77. 78. 79. 80. 81. 82. 83. 84. 85. 86. 87. 88. 89. 90. 91. 92. 93. 94. 95. 96. 97. 98. 99. 100. 101.

533

R.A. Evarestov, V.P. Smirnov, phys. stat. sol. (b) 180, 411 (1993) J. Des Cloizeaux, Phys. Rev. 129, 554 (1963) W. Kohn, Phys. Rev. B, 7, 4388 (1973) J.C. Slater, G.F. Koster, Phys.Rev. 94, 1498 (1954) V.P. Smirnov, D.E. Usvyat, Phys. Rev. B 59, 9695 (1999) N. Marzari, D. Vanderbilt, in First-Principles Calculations for Ferroelectrics, ed. R.E. Cohen, AIP Conf. Proc. No 436 (AIP, Woodbury, 1998), p.146 I. Souza, N. Marzari, D. Vanderbilt, Phys. Rev. B 65, 035109 (2001) http://www.wannier-transport.org C.M. Zicovich-Wilson, A. Bert, C. Roetti, R. Dovesi, V.R. Saunders J. Chem. Phys. 116, 1120 (2002) A. Bert, M. Llunell, R. Dovesi, C.M. Zicovich-Wilson, Phys. Chem. Chem. Phys. 5, 5319 (2003) E. Clementi, C. Roetti, Roothaan–Hartree–Fock Atomic Functions, in Atomic Data and Nuclear Data Tables, 14, 177 (1974) C.C.J. Roothaan, Rev. Mod. Phys. 23, 69 (1951) C.C.J. Roothaan, Rev. Mod. Phys. 32, 179 (1960) J.A. Pople, R.K. Nesbet, J. Chem. Phys. 22, 571 (1954) E. Apra, Lecture Notes in Chem. 67, 101 (1996) R.A. Evarestov, I.I. Tupitsyn, Phys. Solid State 44, 1656 (2002 ) P.P. Ewald, Ann. Phys. 64, 253 (1921) A.B. Kunz, Phys. Rev. B 6, 606 (1972) J.J. Ladik, Phys. Rep. 313, 171 (1999) J.-M. Andre, L. Gouverneur, G. Leroy, Int. J. Quantum Chem. 1, 427, 451 (1967) C. Pisani, R. Dovesi, Int. J. Quantum Chem. 17, 501, 517 (1980) R. Dovesi, C. Pisani, C. Roetti, P.Dellarole, Phys. Rev. B 24, 4170 (1981) R. Dovesi, M. Causa, G. Angonoa, Phys. Rev. B 24, 4177 (1981) M. Causa, Lecture Notes in Chem. 67, 91 (1996) C. Pisani, U.Birkenheuer, Comp. Phys. Commun. 96, 221 (1996) http://www.crystal.unito.it http://www.cse.clrc.ac.uk K.N. Kudin, G.E. Scuseria, Phys. Rev. B 61, 16440 (2000) R. Improta, K.N. Kudin, G.E. Scuseria, V. Barone, J. Am. Chem. Soc 124, 113 (2002) N.W. Ashcroft, N.D. Mermin, Solid State Physics (Cole, London, 1976 ) M.F. Guest, V.R. Saunders, Mol. Phys. 28, 819 (1974) R.A. Evarestov, V.P. Smirnov, J. Phys.: Condens. Matter 9, 3023 (1997) R.A. Evarestov, V.P. Smirnov, phys. stat. sol. (b) 119, 9 (1983) D. J. Chadi, M.L. Cohen, Phys. Rev. B 8, 5747 (1973) J. Moreno, J.M. Soler, Phys. Rev. B 46, 13891 (1992) H.J. Monkhorst, J.D. Pack, Phys. Rev. B 13, 5188 (1976) R.A. Evarestov, V.P. Smirnov, Phys. Rev. B 70, 233101 (2004) A. Baldereschi, Phys. Rev. B 7, 5212 (1973) D. Vanderbilt, Phys. Rev. B 41, 7892 (1990) M. Causa, R. Dovesi, C. Roetti, Phys. Rev. B 43, 11937 (1991) R.A. Evarestov, V.A. Lovchikov, I.I. Tupitsin, phys. stat. sol. (b) 117, 417 (1983) K.B. Wiberg, Tetrahedron 24, 1083 (1968) V.A. Veryazov, A.V. Leko, R.A. Evarestov Phys. Solid State 41, 1286 (1999) R.A. Evarestov, I.I. Tupitsyn, Russ. J. Phys. Chem. 74, S363 (2000) C. Pisani, E. Apra, M. Causa, Int. J. Quantum Chem. 38, 419 (1990) T. Bredow, R.A. Evarestov, K. Jug, phys. stat. sol. (b) 222, 495 (2000) V. Fock, M. Vesselow, M. Petrashen, Zh. Exsp. Theor. Fiz. 10, 723 (1940)

534

References

102. C.J. Cramer, Essentials of Computational Chemistry, 2nd edn. (Wiley, New York, 2004). 103. M.J. Wong, L. Radom, J. Phys. Chem. 99, 8582 (1995) 104. C. Moller, M.S. Plesett, Phys.Rev. 46, 618 (1934) 105. Per-Olov L¨ owdin, Int. J. Quantum Chem. 55, 77 (1995) 106. P. Knowles, M. Sch¨ utz, H.-J. Werner, in Modern Methods and Algorithms of Quantum Chemistry, Proceedings, 2nd edn. ed. by J. Grotendorst, John von Neumann Institute for Computing, Julich, NIC Series, 3, 97 (2000) 107. Gaussian 03, Revision C.02, M.J. Frisch, G.W. Trucks, H.B. Schlegel, G.E. Scuseria, M.A. Robb, J.R. Cheeseman, J.A. Montgomery Jr., T. Vreven, K.N. Kudin, J.C. Burant, J.M. Millam, S.S. Iyengar, J. Tomasi, V. Barone, B. Mennucci, M. Cossi, G. Scalmani, N. Rega, G.A. Petersson, H. Nakatsuji, M. Hada, M. Ehara, K. Toyota, R. Fukuda, J. Hasegawa, M. Ishida, T. Nakajima, Y. Honda, O. Kitao, H. Nakai, M. Klene, X. Li, J.E. Knox, H.P. Hratchian, J.B. Cross, V. Bakken, C. Adamo, J. Jaramillo, R. Gomperts, R.E. Stratmann, O. Yazyev, A.J. Austin, R. Cammi, C. Pomelli, J.W. Ochterski, P.Y. Ayala, K. Morokuma, G.A. Voth, P. Salvador, J.J. Dannenberg, V.G. Zakrzewski, S. Dapprich, A.D. Daniels, M.C. Strain, O. Farkas, D.K. Malick, A.D. Rabuck, K. Raghavachari, J.B. Foresman, J.V. Ortiz, Q. Cui, A.G. Baboul, S. Clifford, J. Cioslowski, B.B. Stefanov, G. Liu, A. Liashenko, P. Piskorz, I. Komaromi, R.L. Martin, D.J. Fox, T. Keith, M.A. Al-Laham, C.Y. Peng, A. Nanayakkara, M. Challacombe, P.M.W. Gill, B. Johnson, W. Chen, M.W. Wong, C. Gonzalez, and J.A. Pople, Gaussian, Inc., Wallingford CT, 2004, http://www.gaussian.com/citation.htm 108. http://www.eecs.harvard.edu/ mdw/proj/old/jaguar/release.html 109. C. Pisani, M. Busso, G. Capecchi, S. Casassa, R. Dovesi, L. Maschio, C. ZicovichWilson, M. Schutz, J. Chem. Phys. 122, 094113 (2005) 110. P. Fulde, Adv. Phys. 51, 909 (2002) 111. H. Stoll, Chem. Phys. Lett. 191, 548 (1992) 112. A. Shukla, M. Dolg, P. Fulde, H. Stoll, Phys. Rev. B 60, 5211 (1999) 113. B. Paulus, Chem. Phys. Lett. 371, 7 (2003) 114. P.Fulde, H. Stoll, Found. Physics 30, 2049 (2000) 115. K.N. Kudin, G.E. Scuseria, J. Chem. Phys. 113, 7779 (2000) 116. http://www.molpro.net 117. http://www.theochem.unito.it/lcc2004/cryscor.pdf 118. B.O. Roos, Acc. Chem. Res. 32, 137 (1999) 119. http://www.emsl.pnl.gov/docs/nwchem/ 120. J. Cizek, J. Chem. Phys. 45, 4256 (1966) 121. T.D. Crawford, J. Stanton, Int. J. Quantum Chem. 70, 601 (1998) 122. K. Raghavachari, G.W. Trucks, J.A. Pople, M. Head-Gordon, Chem. Phys. Lett. 157, 479 (1989) 123. K.L. Bak, A. Halkier, P. Jorgensen, J. Olsen, T. Helgaker, W. Klopper, J. Mol. Structure (Theochem) 567–568, 375 (2001) 124. K. Hald, A. Halkier, P. Jorgensen, S. Horiani, S. H¨ attig, L. Helgaker, J. Chem. Phys. 118, 2985 (2003) 125. M. Kallay, J. Gauss, J. Chem. Phys. 120, 6841 (2004) 126. Y. He, D. Cremer, Mol. Phys. 98, 1415 (2000) 127. M.S. Lee, P.E. Masien, M. Head-Gordon, J. Chem. Phys. 112, 3592 (2000) 128. C. Hampel, H.-J. Werner, J. Chem. Phys. 104, 6286 (1996) 129. P.Y. Ayala, G.E. Scuseria, J. Chem. Phys. 1103660 (1999) 130. P. Pulay, S. Sacho, Theor. Chim. Acta 69, 357 (1986) 131. M. Sch¨ utz, G. Hetzer, H-J. Werner, J. Chem. Phys. 111, 5691 (1999) 132. P. Knowles, M. Schutz, H-J. Werner, in Modern Methods and Algorithms of Quantum Chemistry, Proceedings, 2nd edn., ed. by J. Grotendorst, John von Neumann Institute for Computing, Jeulich, NIC Series, 3, 97 (2000).

References 133. 134. 135. 136. 137. 138. 139. 140. 141. 142. 143. 144. 145. 146. 147. 148. 149. 150. 151.

152. 153. 154. 155. 156. 157. 158. 159. 160. 161. 162. 163. 164. 165. 166. 167. 168. 169. 170. 171. 172. 173. 174. 175. 176. 177. 178. 179.

535

M.Sch¨ utz, J. Chem. Phys. 114, 661 (2001) M.Sch¨ utz, J. Chem. Phys. 116, 8772 (2002) S.Goedecker, G.Scuseria, Comput. Sci. Eng., 5(4), 14 (2003) S. Saebo, P. Pulay, J. Chem. Phys. 86, 914 (1987) M. Haser, J. Alml¨ of, J. Chem. Phys. 96, 489 (1992) P. Constans, G.E. Scuseria, Collect. Czech. Chem. Commun. 68, 357 (2003) M. Sch¨ utz, H-J. Werner, R. Lindh, F.R. Manby, J. Chem. Phys. 121, 737 (2004) A. Hesselmann, G. Jansen, M.Sch¨ utz J. Chem. Phys. 122, 014103 (2005) M. Sch¨ utz, G. Rauhut, H.-J. Werner, J. Phys. Chem. A 102, 5997 (1998) M. Sch¨ utz, Phys. Chem. Chem. Phys. 4, 3941 (2002) G.E. Scuseria, P.Y. Ayala, J. Chem. Phys. 111, 8330 (1999) J.W. Boughton, P.Pulay, J. Comput. Chem. 14, 736 (1993) G. Hetzer, P. Pulay, H-J. Werner, Chem. Phys. Lett. 290, 143 (1998) H-J. Werner, F.R. Manby, P.J. Knowles, J. Chem. Phys. 118, 8149 (2003) M.Sh¨ utz, F.R. Manby, Phys. Chem. Chem. Phys. 5, 3349 (2003) F. Weigend, M. H¨ aser, Theor. Chim. Acta 97, 331 (1997) M. Sch¨ utz, J. Chem. Phys. 113, 9986 (2000) W. Heitler, F. London, Z. Phys. 44, 455 (1927) Strong Coulomb Correlations in Electronic Structure Calculations. Beyond the Local Density Approximation, ed. by Vladimir I.Anisimov (Gordon and Breach Sci. Publ., Amsterdam, 2000) J.P. Perdew, A. Zunger, Phys. Rev. B 23, 5048 (1991) V.I. Anisimov, J. Zaanen, O.K. Andersen, Phys. Rev. B 44, 943 (1991) C. Pisani, J. Molec. Structure (Theochem) 621, 141 (2003) C.M. Zicovich-Wilson, R. Dovesi, Chem. Phys. Lett. bf 277, 227 (1997) http://www.theochem.unito.it/lcc2004/ D.E. Usvyat, M. Sch¨ utz, Theor. Chem. Acc. 114, 276 (2005) A. Shukla, M. Dolg, H. Stoll, P. Fulde, Phys. Rev. B 57, 1471 (1998) B. Paulus, P. Fulde, H. Stoll, Phys.Rev B 51, 10572 (1995) B. Paulus, Physics Reports 428, 1 (2006) W.Kutzelnigg, in: Methods of Electronic Structure Theory, ed. by H.F. SchaeferIII (Plenum, New York, 1977), pp.129 H. Stoll, B. Paulus, P. Fulde, J. Chem. Phys. 123, 144108 (2005) B. Paulus, P. Fulde, H. Stoll, Phys. Rev. B 54, 2556 (1996) M. Albrecht, B. Paulus, H. Stoll, Phys. Rev. B 56, 7339 (1997) K. Doll, M. Dolg, P. Fulde, H. Stoll, Phys. Rev. B 52, 4842 (1995) K. Doll, M. Dolg, H. Stoll, Phys. Rev. B 54, 13529 (1996) K. Doll, M. Dolg, P. Fulde, H. Stoll, Phys. Rev. B 55, 10282 (1997) K. Doll, H. Stoll, Phys. Rev. B 57, 4327 (1998) K. Rosciszewski, K. Doll, B. Paulus, P. Fulde, H. Stoll, Phys. Rev. B 57, 14667 (1998) K. Rosciszewski, B. Paulus, P. Fulde, H. Stoll, Phys. Rev. B 60, 7905 (1999) K. Rosciszewski, B. Paulus, P. Fulde, H. Stoll, Phys. Rev. B 62, 5482 (2000) B. Paulus, K. Rosciszewski, N.Gaston, P. Schwerdtfeger, H. Stoll, Phys. Rev. B 70, 165106 (2004) N. Gaston, B. Paulus, K. Rosciszewski, P. Schwerdtfeger, H. Stoll, Phys. Rev. B 74, 094102 (2006) S. Kalvoda, M. Dolg, H.-J. Flad, P. Fulde, H. Stoll, Phys. Rev. B 57, 2127 (1998) E. Voloshina, B. Paulus, Theor. Chem. Acc. 114, 259 (2005) J. Gr¨ afenstein, H. Stoll, P. Fulde, Chem. Phys. Lett. 215, 611 (1993) J. Gr¨ afenstein, H. Stoll, P. Fulde, Phys. Rev. B 55, 13588 (1997) M. Albrecht, P. Reinhardt, J.-P. Malrieu, Theor. Chem. Acc. 100, 241 (1998) A. Abdurahman, M. Albrecht, A. Shukla, M. Dolg, J. Chem. Phys. 110, 8819 (1999)

536

References

180. M. Albrecht, P. Fulde, H. Stoll, Chem. Phys. Lett. 319, 355 (2000) 181. A. Shukla, M. Dolg, P. Fulde, H. Stoll, Phys. Rev. B 57, 1471 (1998) 182. R. Orlando, R. Dovesi, C. Roetti, V.R. Saunders, J. Phys: Condens. Matter 2, 7769 (1990) 183. P. Fulde, Theor. Chem. Acc. 114, 255 (2005) 184. J.Q. Sun, R.J. Bartlett, J. Chem. Phys. 104, 8553 (1996) 185. P.Y. Ayala, K.N. Kudin, G.E. Scuseria, J. Chem. Phys. 115, 9698 (2001) 186. J. Alml¨ of, Chem. Phys. Lett. 181, 319 (1991) 187. M. Haser, Theor. Chim. Acta 87, 147 (1993) 188. R. Pino, G.E. Scuseria, J. Chem. Phys. 121, 2553 (2004) 189. P.Y. Ayala, G.E. Scuseria, Chem. Phys. Lett. 322, 213 (2000) 190. A. Zunger, A. Katzir, A. Halperin, Phys. Rev. B 13, 5560 (1976) 191. K. Kobayashi, T. Sano, Y. I’Haya, Chem. Phys. Lett. 219, 53 (1994) 192. C. Pisani, G. Capecchi, S. Casassa, L. Maschio, Mol. Phys. 103, 2527 (2005) 193. W. Boughton, P. Pulay, J. Comput. Chem. 14, 736 (1993) 194. W. Kohn, Phys. Rev. 115, 809 (1959) 195. P.W. Anderson, Phys. Rev. Lett. 21, 13 (1968) 196. P. Zeiner, R. Dirl, B.L. Davies, Phys. Rev. B 58, 7681 (1998) 197. L. He, D. Vanderbilt, Phys. Rev. Lett. 86, 5341 (2001) 198. R.A. Evarestov, D.E. Usvyat, V.P. Smirnov, Phys. Solid State 45, 2072 (2003) 199. S. Lui, J.M. Perez-Jorda, W. Yang, J. Chem. Phys. 112, 1634 (2000) 200. H. Feng, J. Bian, L. Li, W. Yang, J. Chem. Phys. 120, 9458 (2004) 201. S. Casassa, C.M. Zicovich-Wilson, C. Pisani, Theor. Chem. Acc. 116, 726 (2006) 202. C.M. Zicovich-Wilson, R. Dovesi, Int. J. Quantum Chem. 67, 299(1998) 203. C.M. Zicovich-Wilson, R. Dovesi, V.R. Saunders, J. Chem. Phys. 115, 9708 (2001) 204. R. Hoffmann, J. Chem. Phys. 39, 1397 (1963) 205. J.A. Pople, D.L. Beveridge, Approximate Molecular Orbital Theory (McGraw-Hill, N.Y., 1970) 206. E.B. Moore, C.M. Carlson, Phys. Rev. B 4, 2063 (1971) 207. R. Dovesi, C. Pisani, F.Ricca, C. Roetti, Chem. Phys. Lett. 39, 103 (1976) 208. A.R. Leach, Molecular Modelling:Principles and Applications, 2nd edn. ( Pearson Education EMA, 2001) 209. R. Canadine, I. Hiller, J. Chem. Phys. 50, 2985 (1969) 210. J.C. Slater, Phys. Rev. 36, 57 (1930) 211. J. Hinze, H.H. Jaffe, J. Am. Chem. Soc. 84, 540 (1962) 212. L.C. Cusachs, J.W. Reinolds, D. Barnard, J. Chem. Phys. 44, 835 (1966) 213. M. Wolfsberg, L.J. Helmholz, J. Chem. Phys. 20, 837 (1952) 214. M. Nishida, Phys. Rev. B 58, 7103 (1998) 215. J.R. Chelikowsky, M.L. Cohen, Phys. Rev. B 10, 5095 (1974) 216. J. Cerda, F. Soria, Phys. Rev. B 61, 7965 (2000) 217. A. Herman, Modeling Simul. Mater. Sci. Eng. 12, 21 (2004) 218. W. Koch, B. Frey, J.F.S. Ruiz, T. Scior, Z. Naturforsch. 58a, 756 (2003) 219. K. Ruedenberg, J. Chem. Phys. 19, 1433 (1951) 220. R.S. Mulliken, J. Chim. Phys. 46, 500, 521 (1949) 221. R. Fenske, K. Caulton, D. Radtke, C. Sweeney, Inorg. Chem. 5, 951 (1966) 222. R.A. Evarestov, A.N. Ermoshkin, phys. stat. sol. (b) 86, 47 (1978) 223. W. Koch, B. Frey, J.F.S. Ruiz, T. Scior, Z. Naturforsch. 58a, 785 (2003) 224. A.N. Ermoshkin, E.A. Kotomin, A.L. Shluger, J. Phys. C: Solid State Phys. 15, 847 (1982) 225. P.O. L¨ owdin, J. Chem. Phys. 18, 365 (1950) 226. A.N. Ermoshkin, E.A. Kotomin, R.A. Evarestov, phys. stat. sol. (b) 72, 787 (1975)

References

537

227. G.A. Bordovskii, M.L. Gordeev, A.N. Ermoshkin, R.A. Evarestov, phys. stat. sol. (b) 111, K123 (1982) 228. R.A. Evarestov, A.N. Ermoshkin, V.A. Lovchikov, phys. stat. sol. (b) 99, 387 (1980) 229. A.N. Ermoshkin, R.A. Evarestov, Optica i Spectroskopija 35, 786 (1973) 230. A.N. Ermoshkin, R.A. Evarestov, phys. stat. sol. (b) 66, 687 (1974) 231. A.N. Ermoshkin, R.A. Evarestov, E.A. Kotomin, phys. stat. sol. (b) 73, 81 (1976) 232. R.A. Evarestov, A.N. Ermoshkin, Optica i Spectroskopija 40, 610 (1976) 233. R.A. Evarestov, A.N. Ermoshkin, E.A. Kotomin, phys. stat. sol. (b) 73, 483 (1976) 234. A.N. Ermoshkin, E.A. Kotomin, R.A. Evarestov, phys. stat. sol. (b) 103, 581 (1981) 235. T. Bredow, K. Jug, Theor. Chem. Acc. 113, 1 (2005) 236. J.A. Pople, D.P. Santry, G.A. Segal, J. Chem. Phys. 43, S129 (1965) 237. R. Pariser, G.R. Parr, J. Chem. Phys. 21, 466, 767 (1953) 238. N. Mataga, K. Nishimoto, Z. Phys. Chem. 13, 140 (1957) 239. K. Ohno, Adv. Quantum Chem. 3, 240 (1967) 240. M.G. Veselov, M.M. Mestechkin, Theor. Exp. Chem. 6, 471 (1973) 241. J.A. Pople, D.L. Beveridge, P.A. Dobosh, J. Chem. Phys. 47, 2026 (1967) 242. Da Motta Neto, M.C. Zerner Int. J. Quantum Chem. 81, 187 (2001) 243. J.E. Ridley, M.C. Zerner, Theor. Chim. Acta 32, 111 (1973) 244. M. Kotzian, N. Rosch, M.C. Zerner, Theor. Chim. Acta 81, 201 (1992) 245. R.C. Bingham, M.J.S. Dewar, D.H. Lo, J. Am. Chem. Soc. 97, 1285, 1307 (1975) 246. M.J.S. Dewar, E.G. Zoebisch, E.F. Healey, J.J.P. Stewart, J. Am. Chem. Soc. 107, 3902 (1985) 247. W.Thiel, J. Am. Chem. Soc. 103, 1413, 1421 (1981) 248. J.J.P. Stewart, J. Comput. Chem. 10, 209 (1989) 249. D.N. Nanda, K. Jug, Theor. Chim. Acta 57, 95 (1980) 250. K. Jug, R.Iffert, J. Schulz, Int. J. Quantum Chem. 32, 265 (1987) 251. J. Li, P. Correa de Mello, K. Jug, J. Comput. Chem. 13, 85 (1992) 252. M.C. Zerner, Mol. Phys. 23, 963 (1972) 253. B. Ahlswede, K. Jug, J. Comput. Chem. 20, 563 (1999) 254. B. Ahlswede, K. Jug, J. Comput. Chem. 20, 572 (1999) 255. K. Jug, G. Geudtner, T. Homann, J. Comput. Chem. 21, 974 (2000) 256. T. Bredow, G. Geudtner, K. Jug, J. Comput. Chem. 22, 861 (2001) 257. T. Bredow, K. Jug, in Encyclopedia of Computational Chemistry (online edition), eds. P. Schleyer, N.L. Allinger, T. Clark, J. Gasteiger, P.A. Kollman, H.F. Schaefer III, P.R. Schreiner (Wiley, Chicester, 2004) 258. J. Schultz, R. Iffert, K. Jug, Int. J. Quantum Chem. 27, 461 (1985) 259. B. Voigt, Theor. Chim. Acta 31, 289 (1973) 260. C. Kollmar, M.C. B¨ ohm, Theor. Chim. Acta 92, 13 (1995) 261. C. Kollmar, Chem. Phys. Lett. 269, 215 (1997) 262. C. Kollmar, B.A. Hess, Mol. Phys. 100, 1945 (2002) 263. H. Fujita, A. Imamura, J. Chem. Phys. 53, 4555 (1970) 264. S. O’Shea, D.P. Santry, J. Chem. Phys. 54, 2667 (1971) 265. K. Mororuma, J. Chem. Phys. 54, 962 (1971) 266. B.J. McAloon, P.G. Perkins, J. Chem. Soc. Faraday Trans.II 68, 1121, 1833 (1972) 267. D.L. Beveridge, I. Jano, J. Ladik, J. Chem. Phys. 56, 4744 (1972) 268. M.C. B¨ ohm, Theor. Chim. Acta 62, 351, 373 (1983) 269. M.J.S. Dewar, K.M. Merz Jr, Organometallics 5, 1494 (1986) 270. J.J.P. Stewart, New Polym. Mater. 1, 53 (1987) 271. J. Chandrasekhar, P.K. Das, J. Phys. Chem. B 96, 679 (1992) 272. L.Y.A. Davila, M.J. Caldas, J. Comput. Chem. 23, 1135 (2002) 273. F. Ricca, J. Phys. (Paris) 38, Suppl.C-4, 173 (1977) 274. R. Dovesi, C. Pisani, F. Ricca, C. Roetti, Surf. Sci. 75, 316 (1978)

538 275. 276. 277. 278. 279. 280. 281. 282. 283. 284. 285. 286. 287. 288. 289. 290. 291.

292. 293. 294. 295. 296. 297. 298. 299. 300. 301. 302. 303. 304. 305. 306. 307. 308. 309. 310. 311. 312. 313. 314. 315. 316. 317. 318. 319.

References R. Dovesi, C. Pisani, F. Ricca, C. Roetti, J. Chem. Phys. 65, 3075, 4116 (1976) R.A. Evarestov, V.A. Lovchikov, phys. stat. sol. (b) 79, 743 (1977) A.H. Harker, F.P. Larkins, J. Phys. C: Solid State Phys. 12, 2487 (1979) R. Dovesi, C. Pisani, C. Roetti, Surf. Sci. 103, 482 (1981) P.G. Perkins, A.K. Marwaha, J.J.P. Stewart, Theor. Chim. Acta 57, 1 (1980) P.V. Smith, J.E. Szymanski, J.A.D. Matthew, J. Phys.: Solid State Phys. 18, 3157 (1985) R.Ramirez, M.C. B¨ ohm, Int. J. Quantum Chem. 34, 47 (1988) R. Dovesi, C. Pisani, C. Roetti, J.M. Ricart, F.Illas, Surf. Sci. 148, 225 (1984) B.I. Craig, P.V. Smith, Surf. Sci. 210, 468 (1989) J.D. Weibel, D. Yaron, J. Chem. Phys. 116, 6846 (2002) A.J. Bennett, B. McCarroll, R.P. Messmer, Phys. Rev. B 3, 1397 (1971) A. Zunger, J.Phys. C: Solid State Phys. 7, 76 (1974) A. Zunger, J. Chem. Phys. 62, 1861 (1975) R.P. Messmer, G.D.Watkins in Radiation Damage and Defects in Semiconductors, N16, p.255, Institute of Physics, London (1973) A.M. Dobrotvorskii, R.A. Evarestov, phys. stat. sol. (b) 66, 83 (1974) R.A. Evarestov, M.I. Petrashen, E.M. Ledovskaya, phys. stat. sol. (b) 76, 377 (1976) Hartree-Fock-Slater Method for Materials Science. The DV-X Alpha Method for Design and Characterization of Materials, eds. H.Adachi, T.Mukoyama, J. Kawai, in Springer Series in Materials Science, vol. 84, (Spinger, Berlin, Heidelberg, New York, 2006) U.Lindefeldt, J. Phys. C: Solid State Phys. 11, 85 (1978) P. Deak, L. Snyder, Phys. Rev. B 36, 9619 (1987) P. Deak, phys. stat. sol. (b) 217, 9 (2000) R.A. Evarestov, M.I. Petrashen, E.M. Ledovskaya, phys. stat. sol. (b) 68, 453 (1975) V.A. Koptsik, R.A. Evarestov, Kristallographia 25, 5 (1980) R.A. Evarestov, A.V. Leko, V.P. Smirnov, phys. stat. sol. (b) 128, 275 (1985) P.G. Perkins, J.J.P. Stewart, J. Chem. Soc. Faraday II 76, 520, 534 (1980) J.J.P. Stewart, J. Comput. Chem. 19, 168 (1998) R.A. Evarestov, V.A. Lovchikov, phys. stat. sol. (b) 93, 469 (1979) T. Bredow, G.Geudtner, K. Jug, Int. J. Quantum Chem. 22, 89 (2001) F. Janetzko, T. Bredow, K. Jug, J. Chem. Phys. 116, 8994 (2002) P. Deak, Phys. Lett. A 83, 39 (1981) A.L. Shluger, E.A. Kotomin, phys. stat. sol. (b) 108, 673 (1981) R.A. Evarestov, V.A. Veryazov, phys. stat. sol. (b) 157, 281 (1990) R.A. Evarestov, V.A. Veryazov, Rev. Solid State Sci. 5, 415 (1991) J. Noga, P. Banacky, S. Biskupic, R. Boca, P. Pelikan, M. Svrcek, A. Zajac, Int. J. Quantum Chem. 20, 253 (1999) P. Pelikan, J. Noga, S. Biskupic, J. Solid State Chem. 174, 233 (2003) E. Stefanovich, E. Shidlovskaya, A. Schluger, phys. stat. sol. (b) 160, 529 (1990) S.S. Moliver, Phys. Solid State 42, 673 (2000) A.O. Litinskii, I.P. Zakharov, J. Struct. Chem. 27, 517 (1986) J.J.P. Stewart, J. Molec. Struct. (Theochem) 556, 59 (2000) A. Schluger, Theor. Chim. Acta 66, 355 (1985) A.H. Harker, F.P. Larkins, J. Phys. C: Solid State Phys. 12, 2509 (1979) E.A. Kotomin, A.L. Schluger, phys. stat. sol. (b) 109, 75 (1982) A.H. Harker, F.P. Larkins, J. Phys. C: Solid State Phys. 12, 2497 (1979) P.V. Smith, J.E. Szymanski, J.A.D. Matthew, phys. stat. sol. (b) 136, 261 (1986) R.A. Evarestov, V.A. Veryazov, phys. stat. sol. (b) 158, 201 (1990) A. Porreda, V.A. Lovchikov, K. Jug in NATO ASI Series B Cluster Models for Surface and Bulk Phenomena, eds. G. Pacchioni, P.S. Bagus, F. Parmigiani, Plenum New York, 1992, 283, p.641

References

539

320. K. Jug, T. Bredow, J. Comput. Chem. 25, 1551 (2004) 321. K. Jug, T. Bredow in Methods and Techniques in Computational Chemistry, METECC95, ed. E. Clementi, p. 89, STEF, Calgari (1995) 322. R. Dovesi, V.R. Saunders, C. Roetti, N.M. Harrison, R.Orlando, E. Apra, Crystal95 User’s Manual, Universita di Torino, Torino (1996) 323. B. Silvi, N. Fouranti, R. Nada, C.R. Catlow, J. Phys. Chem. Solids 52, 1005 (1991) 324. C. Pisani, R. Dovesi, C. Roetti, Hartree–Fock ab-initio Treatment of Crystalline Systems, Lecture Notes in Chemistry 48, Springer-Verlag, Berlin (1988) 325. L.H. Thomas, Proc. Camb. Philos. Soc. 23, 542 (1927) 326. E. Fermi, Z. Phys. 48, 73 (1928) 327. J.C. Slater, Phys. Rev. 91, 528 (1953) 328. P. Hohenberg, W. Kohn, Phys. Rev. 136, B864 (1964) 329. N.C. Handy, Molec. Phys. 102, 2399 (2004) 330. K. Capelle, A Birds-eye View of Density Functional Theory, http://arXiv.org/archive/cond-mat/0211443v4 331. W. Kohn, Rev. Mod. Phys. 71, 1253 (1998) 332. W. Kohn, L.J. Sham, Phys. Rev. 140, A1133 (1965) 333. R.M. Dreizler, E.K.U. Gross, Density Functional Theory (Springer, Berlin, 1990). 334. N.H. March, Electron Density Theory of Atoms and Molecules (Academic Press, London, 1992). 335. H. Eschrig, The Fundamentals of Density Functional Theory (Teubner, Leipzig, 1996). 336. Density Functional Theory: Recent Progress and New Directions, eds. J.F. Dobson, G. Vignale, M.P. Das (Plenum, New York, 1998) 337. W. Koch, M.C. Holthausen, A Chemist’s Guide to Density Functional Theory, 2nd edn. (John Wiley, New York, 2002). 338. R.O. Jones, O. Gunnarsson, Rev. Mod. Phys. 61, 689 (1989) 339. R. Neumann, Molec. Phys. 87, 1( 1996) 340. J.P. Perdew, S. Kurth, Lecture Notes in Phys. 620, 1 (2003) 341. K. Burke, J. Werschnik, E.K.U. Gross, J. Chem. Phys. 123, 062206 (2005) 342. I.G. Kaplan, Intermolecular Interactions. Physical Picture, Computational Methods and Model Potentials, (Wiley, 2006). 343. K. Capelle, V.L. Libero, Int. J. Quantum Chem. 105, 679 (2005) 344. http://www.uam.es/departamentos/ciencias/fismateriac/siesta/ 345. http:///www.scm.com/Doc/Doc2006.01 346. J.C. Slater, Phys. Rev. 81, 385 (1951) 347. P.A.M. Dirac, Proc. Camb. Philos. Soc. 26, 376 (1930) 348. U. von Barth, L. Hedin, J. Phys. C: Condens. Matter 5, 1629 (1972) 349. O. Gunnarsson, B.I. Lundqvist, Phys. Rev. B 13, 4274 (1976) 350. D.M. Ceperley, B.J. Alder, Phys. Rev. Lett. 45, 566 (1980) 351. S.J. Vosko, L. Wilk, M. Nussair, Can. J. Phys. 1980, 1200 (1980) 352. J.P. Perdew, A. Zunger, Phys. Rev. B 23, 5048 (1981) 353. J.P. Perdew, Y. Wang, Phys. Rev. B 40, 3389 (1989) 354. J.P. Perdew, A. Zunger, Phys. Rev. B 45, 13244 (1992) 355. J.P. Perdew, A. Zunger, Phys. Rev. B 33, 8800 (1986) 356. J.P. Perdew, K. Burke, M. Ernzerhof, Phys. Rev. Lett. 77, 3865 (1996) 357. J.P. Perdew, A. Ruzsinszky, J. Tao, V.N. Staroverov, G.E. Scuseria, G.I. Csonka, J. Chem. Phys. 123, 062201 (2005) 358. A.D. Becke, Phys. Rev. A 38, 3098 (1988) 359. C. Lee, W. Wang, R.G. Parr, Phys. Rev. B 37, 785 (1988) 360. J. Tao, J.P. Perdew, V.N. Staroverov, G.E. Scuseria, Phys. Rev. Lett. 91, 146401 (2003) 361. Xin Xu, W.A. Goddard III, J. Chem. Phys. 121, 4068 (2004) 362. J. Tao, J.P. Perdew, V.N. Staroverov, G.E. Scuseria, Phys. Rev. B 69, 075102 (2004)

540 363. 364. 365. 366. 367. 368. 369. 370. 371. 372. 373. 374. 375. 376. 377. 378. 379. 380. 381. 382. 383. 384. 385. 386. 387. 388. 389. 390. 391. 392. 393. 394. 395. 396. 397. 398. 399. 400. 401. 402. 403. 404. 405. 406. 407. 408. 409.

References J.P. Perdew, S. Kurth, A. Zupan, P. Blaha, Phys. Rev. Lett. 82, 2544 (1999) J.P. Perdew, K. Burke, Y. Wang, Phys. Rev. B 54, 16533 (1996) P. Ziesche, S. Kurth, J.P. Perdew, Comput. Mater. Sci. 11, 122 (1998) E.H. Lieb, S. Oxford, Int. J. Quantum Chem. 19, 427 (1981) E.J. Baerends, O.V. Gritsenko, J. Chem. Phys. 123, 062202 (2005) M. Gruning, O.V. Gritsenko, E.J. Baerends, J. Chem. Phys. 118, 7183 (2003) E.J. Baerends, Phys. Rev. Lett. 87, 133004 (2001) M.A. Buijse, E.J. Baerends, Molec. Phys. 100, 401 (2002) F. Cora, M. Alfredsson, G. Mallia, D. Midlemiss, W.C. Mackrodt, R. Dovesi, R. Orlando, Struct. and Bond. 113, 171 (2004) A.D. Becke, J. Chem. Phys. 112, 4020 (2000) A.D. Becke, J. Chem. Phys. 98, 1372, 5468 (1993) O.V. Gritsenko, P.R. T.Schipper, E.J. Baerends, Int. J. Quantum Chem. Symp. 30, 1375 (1996) J.P. Perdew, M. Ernzerhof, K. Burke, J. Chem. Phys. 105, 9982 (1996) J.E. Jaffe, A.C. Hess, J. Chem. Phys. 105, 10983 (1996) M.C. Payne, M.P. Teller, D.C. Allan, J.A. Arias, J.D.Joannopoulos, Rev. Mod. Phys. 64, 1045 (1992) http://www.wien2k.at K.N. Kudin, G.E. Scuseria, Phys. Rev. B 61, 16440 (2000) V.N. Staroverov, G.E. Scuseria, J. Tao, J.P. Perdew, Phys. Rev. B 69, 075102 (2004) L. Greengard, V. Rokhlin, J. Comput. Phys. 73, 325 (1987) K.N. Kudin, G.E. Scuseria, Chem. Phys. Lett. 289, 611 (1998) E. Artacho, D. Sanchez-Portal, P. Ordejon, A. Garcia, J.M. Soler, phys. stat. sol. (b) 215, 809 (1999) P. Ordejon, E. Artacho, J.M. Soler, Phys. Rev. B 53, R10441 (1996) J.R. Chelikowsky, S.G. Loucie, Phys. Rev. B 29, 3470 (1987) G. Velde, E.J. Baerends, Phys. Rev. B 44, 7888 (1991) P.J. Feibelman, Phys. Rev. B 44, 3916 (1991) G. Seifert, D. Porezug, Th. Frauenheim, Int. J. Quantum Chem. 58, 185 (1996) M. Towler, A. Zupan, M. Causa, Comput. Phys. Commun. 98, 181 (1996) A. Lichanot, M. Merawa, M. Causa, Chem. Phys. Lett. 246, 263 (1995) A. Zupan, M. Causa, Int. J. Quantum Chem. 56, 337 (1995) A. Savin, Int. J. Quantum Chem. S22, 457 (1988) A.D. Becke, J. Chem. Phys. 96, 2155 (1992) M. Causa, Lecture Notes in Chem. 48, 91 (1996) F. Figueirido, R.M. Levy, R. Zhou, B. Berne, J. Chem. Phys. 106, 9835 (1997) M. Challacombe, C. White, M. Head-Gordon, J. Chem. Phys. 107, 1013 (1997) K.N. Kudin, G.E. Scuseria, J. Chem. Phys. 121, 2886 (2004) K.N. Kudin, G.E. Scuseria, Phys. Rev. B 61, 5141 (2000) D.L. Strout, G.E. Scuseria, J. Chem. Phys. 102, 8448 (1995) J.M. Soler, E. Artacho, J.D. Gale, A. Garcia, J. Junquera, P. Ordejon, D. SanchezPortal, J. Phys.: Condens. Matter 14, 2745 (2002) E. Anglada, J.M. Soler, J.Junquera, E. Artacho, Phys. Rev. B 66, 205101 (2002) M.C. Strain, G.E. Scuseria, M.J. Frisch, Science 271, 51 (1996) J.C. Burant, M.C. Strain, G.E. Scuseria, M.J. Frisch, Chem. Phys. Lett. 258, 45 (1998) P. Pulay, J. Comput. Chem. 3, 556 (1982) R.E. Stratmann, G.E. Scuseria, M.J. Frisch, 257 257, 213 (1996) http://www.gaussian.com/g people/gus.htm C. Adamo, V. Barone, J. Chem. Phys. 110, 6158 (1999) J. Heyd, G.E. Scuseria, M. Ernzerhof, J. Chem. Phys. 118, 8207 (2003) J. Heyd, G.E. Scuseria, J. Chem. Phys. 120, 7274 (2004)

References 410. 411. 412. 413. 414. 415. 416. 417. 418.

419. 420. 421. 422. 423. 424. 425. 426. 427. 428. 429. 430. 431. 432. 433. 434. 435. 436. 437. 438. 439. 440. 441. 442. 443.

541

W. Kohn, Int. J. Quantum Chem. 56, 229 (1995) J.P. Perdew, M. Ernzerhof, K. Burke, J. Chem. Phys. 105, 9982 (1996) M. Ernzerhof, G.E. Scuseria, J. Chem. Phys. 110, 5029 (1999) J.C. Burant, G.E. Scuseria, M.J. Frisch, J. Chem. Phys. 105, 8969 (1996) E. Schwegler, M. Challacombe, J. Chem. Phys. 105, 2726 (1996) C. Ochsenfeld, C.A. White, M. Head-Gordon, J. Chem. Phys. 109, 1163 (1998) M.W. Gill, J.A. Pople, Int. J. Quantum Chem. 40, 753 (1991) M. Ernzerhof, J.P. Perdew, J. Chem. Phys. 109, 3313 (1998) GAUSSIAN Development Version, Revision B.07, M.J. Frisch, G.W. Trucks, H.B. Schlegel, G.E. Scuseria, M.A. Robb, J.R. Cheeseman, J.A. Montgomery Jr., T. Vreven, K.N. Kudin, J.C. Burant, J.M. Millam, S.S. Iyengar, J. Tomasi, V. Barone, B. Mennucci, M. Cossi, G. Scalmani, N. Rega, G.A. Petersson, H. Nakatsuji, M. Hada, M. Ehara, K. Toyota, R. Fukuda, J. Hasegawa, M. Ishida, T. Nakajima, Y. Honda, O. Kitao, H. Nakai, M. Klene, X. Li, J.E. Knox, H.P. Hratchian, J.B. Cross, V. Bakken, C. Adamo, J. Jaramillo, R. Gomperts, R.E. Stratmann, O. Yazyev, A.J. Austin, R. Cammi, C. Pomelli, J.W. Ochterski, P.Y. Ayala, K. Morokuma, G.A. Voth, P. Salvador, J.J. Dannenberg, V.G. Zakrzewski, S. Dapprich, A.D. Daniels, M.C. Strain, O. Farkas, D.K. Malick, A.D. Rabuck, K. Raghavachari, J.B. Foresman, J.V. Ortiz, Q. Cui, A.G. Baboul, S. Clifford, J. Cioslowski, B.B. Stefanov, G. Liu, A. Liashenko, P. Piskorz, I. Komaromi, R.L. Martin, D.J. Fox, T. Keith, M.A. Al-Laham, C.Y. Peng, A. Nanayakkara, M. Challacombe, P.M.W. Gill, B. Johnson, W. Chen, M.W. Wong, C. Gonzalez, and J.A. Pople, Gaussian Inc., Pittsburg, PA, 2003 J. Heyd, J.E. Peralta, G.E. Scuseria, R.L. Martin, J. Chem. Phys. 123, 174101 (2005) J. Uddin, G.E. Scuseria, Phys. Rev. B 72, 035101 (2005) J. Uddin, J.E. Peralta, G.E. Scuseria, Phys. Rev. B 71, 155112 (2005) I.D. Prodan, G.E. Scuseria, J.A. Sordo, K.N. Kudin, R.L. Martin, J. Chem. Phys. 123, 014703 (2005) V. Barone, J.E. Peralta, J. Uddin, G.E. Scuseria, J. Chem. Phys. 124, 024709 (2006) I.D. Prodan, G.E. Scuseria, R.L. Martin, Phys. Rev. B 73, 045104 (2006) J. Paier, R. Hirschl, M. Marsman, G. Kresse, J. Chem. Phys. 122, 234102 (2005) V.R. Saunders, R. Dovesi, C. Roetti, M. Causa, N.M. Harrison, R. Orlando, C.M. Zicovich-Wilson, Crystal98 User’s Manual, University of Torino, Torino (1998) M.S. Hybertsen, S.G. Louie, Phys. Rev. Lett. 55, 1418 (1985) M.C. Foulkes, L. Mitas, R. Needs, G. Rajagopal, Rev. Mod. Phys. 73, 33 (2001) T. Bredow, A.R. Gerson, Phys. Rev. B 61, 5194 (2000) I. Moreira, F. Illas, R.L. Martin, Phys. Rev. B 65, 155102 (2002) W.C. Mackrodt, D.S. Middlemiss, T.G. Owens, Phys. Rev. B 69, 115119 (2004) F. Illas, R.L. Martin, J. Chem. Phys. 108, 2519 (1998) J. Muscat, A.Wander, N.M. Harrison, Chem. Phys. Lett. 342, 397 (2001) W.G. Aulbur, L. Johnsson, J.W. Wilkins, Solid State Phys. 54, 1 (2000) F. Aryasetiawan, in Strong Coulomb Correlations in Electronic Structure Calculations, ed. V.I. Anisimov, p.1 (Gordon and Breach, Singapore, 2000 ) J.P. Perdew, S. Kurth, A. Zupan, P. Blaha, Phys. Rev. Lett. 82, 544 (1999) L. Petit, A. Svane, Z. Szotek, W.M. Temmerman, Phys. Rev. B 72, 205118 (2005) T. Fujiwara, M. Arai, Y. Ishii, in Strong Coulomb Correlations in Electronic Structure Calculations, ed. V.I. Anisimov, p.167 (Gordon and Breach, Singapore, 2000 ) V.I. Anisimov, A.I. Lichtenstein, in Strong Coulomb Correlations in Electronic Structure Calculations, ed. V.I. Anisimov, p.97 (Gordon and Breach, Singapore, 2000 ) V. Polo, E. Kraka, D.Cremer, Molec. Phys. 100, 1771 (2002) D.Cremer, Molec. Phys. 99, 1899 (2001) G.I. Csonka, B.J. Johnson, Theor. Chem. Acc. 99, 158 (1998) O.A. Vydrov, G.E. Scuseria, J. Chem. Phys. 121, 8187 (2004)

542

References

444. O.A. Vydrov, G.E. Scuseria, J. Chem. Phys. 122, 184107 (2005) 445. A. Svane, W.M. Temmerman, Z. Szotek, J. Laegsgaard, H. Winter, Int. J. Quantum Chem. 77, 799 (2000) 446. A. Flipetti, N.A. Spaldin, Phys. Rev. B 67, 125109 (2003) 447. M. Arai, T. Fujiwara, Phys. Rev. B 51, 1477 (1995) 448. O.K. Anderson, Phys. Rev. B 12, 3060 (1975) 449. M. Imada, A. Fujimori, Y. Tokura, Rev. Mod. Phys. 70, 1040 (1998) 450. A. Rohrbach, J. Hafner, G. Kresse, J. Phys. C: Condens. Matter 15, 979 (2003) 451. G. Kresse, J. Furthmuller, Comput. Mater. Sci. 6, 15 (1996) 452. G. Ricardo, F. Cora, A.A. Sokol, N.H. de Leeuw, C.R.A. Catlow, Phys. Rev. B 73, 035116 (2006) 453. S.ZN. Karazhanov, P. Ravindran, A. Kjekhus, H. Fjellvag, U. Grossner, B.G. Svensson, J. Cryst. Growth 287, 162 (2006) 454. A.G. Eguiluz, O.D. Restrepo, B.C. Larson, J.Z. Tischler, P. Zschack, G.E. Jellison, J. Phys. Chem. Solids 66, 2281 (2005) 455. R. Laskowskii, P. Blaha, K. Schwarz, Phys. Rev. B 67, 075102 (2003) 456. A.L. Ivanovskii, T.I. Chupakhina, V.G. Zubkov, A.P. Tyutyunnik, V.N. Krasilnikov, G.V. Bazuev, S.V. Okatov, A.I. Lichtenstein, Phys. Lett. A 348, 66 (2005) 457. Y. Wang, D.J. Doren, Solid State Commun. 136, 142 (2005) 458. M. Towler, An introductory guide to Gaussian basis sets in solid state electronic structure calculations, http://www.crystal.unito.it/tutojan2004/tutorials/index.html 459. A.D. McLean, R.S. McLean, Roothaan-Hartree-Fock atomic wave functions (Slater basis-set expansions for Z=55-92), Atomic Data and Nuclear Data Tables, 26, 197 (1981) 460. S. Huzinaga, J. Chem. Phys. 42, 1293 (1965) 461. M. Challacombe, J. Cioslowsky, J. Chem. Phys. 100, 464 (1994) 462. T.H. Dunning, J. Chem. Phys. 90, 1007 (1989) 463. http://www.emsl.pnl.gov/forms/basisform.html 464. K. Doll, N.M. Harrison, V.R. Saunders, J. Phys.: Condens. Matter 11, 5007 (1999) 465. J. Sauer, P. Ugliengo, E. Garrone, V.R. Saunders, Chem. Rev. 94, 2095 (1994) 466. S.F. Boys, F. Bernardi, Molec. Phys. 19, 553 (1970) 467. M. Gutowski, J.G. G.M van der Rijdt, J.H van Lenthe, F.B. van Duijneveldt, J. Chem. Phys. 98, 4728 (1993) 468. A. Gruneich, B.A. Hess, Theor. Chem. Acc. 100, 253 (1998) 469. S.D. Kenny, A.P. Horsfield, H. Fujitami, Phys. Rev. B 62, 4899 (2000) 470. http://www.physik.uni-frankfurt.de/ engel/ncpp.html 471. A.P. Christiansen, Y.S. Lee, K.S. Pitzer, J. Chem. Phys. 71, 4445 (1970) 472. D.R. Hamann, M. Schl¨ uter, C. Chiang, Phys. Rev. Lett. 43, 1494 (1979) 473. J.C. Phillips, L. Kleinman, Phys. Rev. 116, 287 (1959) 474. L. Kleinman, D.M. Bylander, Phys. Rev. Lett. 48, 1425 (1982) 475. M.I. Petrashen, I.V. Abarenkov, A.A. Berezin, R.A. Evarestov, phys. stat. sol. (b) 40, 9, 433 (1970) 476. I.V. Abarenkov, V. Heine, Philos. Mag. 12, 529 (1965) 477. D. Vanderbilt, Phys. Rev. B 41, 7892 (1990) 478. M. Fuchs, M. Scheffer, Comput. Phys. Commun. 119, 67 (1999) 479. A. Alkauskas, A. Baratoff, C. Bruder, J. Phys. Chem. A 108, 6863 (2004) 480. M. Krauss, W.J. Stevens, Ann. Rev. Phys. Chem. 35, 357 (1984) 481. M. Dolg, in Modern Methods and Algorithms of Quantum Chemistry, ed. J. Grotendost, NIC Series, 1, 479 (2000), 3, 507 (2000), online http://www.fz-juelich.de/nicseries/NIC-Series-e.html 482. A.V. Titov, N.S. Mosyagin, arXiv.org/physics/0008239 (2000) 483. P.J. Hay, W.R. Wadt, J. Chem. Phys. 52, 270, 284, 299 (1985)

References 484. 485. 486. 487. 488. 489. 490. 491. 492. 493. 494. 495. 496. 497.

498.

499. 500. 501. 502. 503. 504. 505. 506. 507. 508. 509. 510. 511. 512. 513. 514. 515. 516. 517. 518. 519. 520. 521. 522. 523.

524. 525. 526.

543

P. Durand, J.C. Barthelat, Theor. Chim. Acta 38, 283 (1975) W.J. Stevens, H. Basch, M. Krauss, J. Chem. Phys. 81, 6026 (1984) W.J. Stevens, M. Krauss, H. Basch, P.J. Jasic, Can. J. Phys. 70, 612 (1992) H. Stoll, B. Metz, M. Dolg, J. Comput. Chem. 23, 767 (2002) I.V. Abarenkov, I.I. Tupitsyn, J. Chem. Phys. 115, 1650 (2004) Electronic Properties of Solids Using Cluster Methods, eds. T.A. Kaplan, S.D. Mahanti, (Plenum Press, New York London, 1994) I.V. Abarenkov, I.M. Antonova, Int. J. Quantum Chem. 100, 649 (2004) S. Goedecker, K. Maschke, Phys. Rev. B 42, 8858 (1990) P.E. Blochl, Phys. Rev. B 41, 5414 (1999) X. Gonze, R. Stumpf, M. Scheffer, Phys. Rev. B 44, 8503 (1991) A. Khein, Phys. Rev. B 51, 16608 (1995) X. Gonze, P.K¨ ackell, M. Scheffer, Phys. Rev. B 41, 12264 (1990) T. Nakajima, T. Yanai, K. Hirao, J. Comput. Chem. 23, 847 (2002) Relativistic Electronic Structure Theory, Part I, Fundamentals, ed. P. Schwerdtfeger, vol. 11 of Theoretical and Computational Chemistry (Elsevier, Amsterdam, 2002) Relativistic Electronic Structure Theory, Part II, Applications, ed.P. Schwerdtfeger, vol. 14 of Theoretical and Computational Chemistry (Elsevier, Amsterdam, 2004) T. Saue, T. Helgaker, J. Comput. Chem. 23, 814 (2002) A.K. Rajagopal, J. Callaway, Phys. Rev. B 7, 1912 (1973) C. van Wullen, J. Comput. Chem. 23, 779 (2002) K.G. Dyall, J. Comput. Chem. 23, 786 (2002) L. Visscher, J. Comput. Chem. 23, 759 (2002) L. Visscher, O. Visser, H. Aerts, H. Merenga, W.C. Nieuwport, Comput. Phys. Commun. 81, 120 (1994) T. Saue, K. Fargi, T. Helgaker, O. Gropen, Molec. Phys. 91, 937 (1997) I.P. Grant, H.M. Quiney, Int. J. Quantum Chem. 80, 283 (2000) W. Kutzelnigg, Z. Phys. D 15, 27 (1990) Y.S. Lee, W.C. Ermler, K.S. Pitzer, J. Chem. Phys. 67, 5861 (1977) E. Lenthe, E.J. Baerends, J.G. Snijders, J. Chem. Phys. 99, 4597 (1993) W.C. Ermler, R.B. Ross, P.A. Christiansen, Adv. Quantum Chem. 19, 139 (1988) P. Schwerdtfeger, in Theoretical Chemistry and Physics of Heavy and Superheavy elements, eds. U. Kaldor, S. Wilson (Kluwer, Dordrecht, 2003) A.N. Petrov, N.S. Mosyagin, A.V. Titov, I.I. Tupitsyn, J. Phys. B 37, 4621 (2004) K.G. Dyall, J. Chem. Phys. 100, 2118 (1994) A.V. Titov, N.S. Mosyagin, Int. J. Quantum Chem. 71, 359 (1999) G. Treurich, N.A. Hill, Phys. Rev. B 64, 073106 (2001) D.Figgen, G. Rauhut, M. Dolg, H. Stoll, Chem. Phys. 311, 227 (2005) M. Dolg, Theor. Chem. Acc. 114, 297 (2005) K.A. Peterson, C. Puzzarini, Theor. Chem. Acc. 114, 283 (2005) X. Cao, M. Dolg, J. Mol. Struct. (Theochem) 673, 203 (2004) X.Cao, M. Dolg, H. Stoll, J. Chem. Phys. 118, 487 (2003) V. Bonifacic, S. Huzinaga, J. Chem. Phys. 60, 2779 (1974) S. Katsuki, S. Huzinagaa, Chem. Phys. Lett. 152, 203 (1988) L. Seijo, Z. Barandiaran in Relativistic Electronic Structure Theory, Part II, Applications, ed.P. Schwerdtfeger, vol. 14 of Theoretical and Computational Chemistry (Elsevier, Amsterdam, 2004), p.417 N.S. Mosyagin, A.V. Titov, E. Eliav, U. Kaldor, J. Chem. Phys. 115, 2007 (2001) N.S. Mosyagin, A.V. Titov, J. Chem. Phys. 122, 234106 (2005) L.F. Pacios, P.A. Christiansen, J. Chem. Phys. 82, 2664 (1985)

544

References

527. M.G. Kozlov, V.I. Fomichev, Y.Y. Dmitriev, L.N. Labzovsky, A.V. Titov, J. Phys. B 20, 4939 (1987) 528. Y.Y. Dmitriev, Y.G. Khait, M.G. Kozlov, L.N. Labzovsky, A.O. Mitrushenkov, A.V. Titov, Phys. Lett. A 167, 280 (1992) 529. A.V. Titov, N.S. Mosyagin, V.F. Ezhov, Phys. Rev. Lett. 77, 5346 (1996) 530. N.S. Mosyagin, M.G. Kozlov, A.V. Titov, J. Phys. B 31, L763 (1998) 531. M.G. Kozlov, A.V. Titov, N.S. Mosyagin, P.V. Souschko, Phys. Rev. A 56, R3326 (1997) 532. A.N. Petrov, N.S. Mosyagin, T.A. Isaev, A.V. Titov, V.F. Ezhov, E. Eliav, U. Kaldor, Phys. Rev. Lett. 88, 073001 (2002) 533. T.A. Isaev, A.N. Petrov, N.S. Mosyagin, A.V. Titov, E. Eliav, U. Kaldor, Phys. Rev. A 69, R03050 (2004) 534. A.N. Petrov, A.V. Titov, T.A. Isaev, N.S. Mosyagin, D.P. DeMolle, Phys. Rev. A 72, 022505 (2005) 535. T.A. Isaev, N.S. Mosyagin, A.N. Petrov, A.V. Titov, Phys. Rev. Lett. 95, 163004 (2005) 536. P.E. Bl¨ ochl, Phys. Rev. B 50, 17953 (1994) 537. A.V. Titov, N.S. Mosyagin, A.N. Petrov, T.A. Isaev, Int. J. Quantum Chem. 104, 223 (2005) 538. J. Alml¨ of, P.R. Taylor, J. Chem. Phys. 86, 4070 (1987) 539. B. Liu, A.D. McLean, J. Chem. Phys. 91, 2348 (1989) 540. A.V. Titov, Int. J. Quantum Chem. 45, 7 (1993) 541. S. Suzuki, K. Nakao, J. Phys. Soc. Jpn. 68, 1982 (1999) 542. J.C. Boettger, Phys. Rev. B 57, 8743 (1998) 543. K. Kudin, G.E. Scuseria, R.L. Martin, Phys. Rev. Lett. 89, 266402 (2002) 544. T. Tsuchiya, M. Abe, T. Nakajama, K. Hirao, J. Chem. Phys. 115, 4463 (2001) 545. E. van Lenthe, E.J. Baerends, J. Comput. Chem. 24, 1142 (2003) 546. J.C. Boettger, Eur. Phys. J. 36, 15 (2003) 547. J.J. Ladik, J. Mol. Struct. (Theochem) 391, 1 (1997) 548. M. Douglas, N.M. Kroll, Ann. Phys. 82, 89 (1974) 549. B.A. Hess, Phys. Rev. A 33, 3742 (1986) 550. J.E. Peralta, G.E. Scuseria, J. Chem. Phys. 120, 5875 (2004) 551. T. Nakajima, K. Hirao, J. Chem. Phys. 113, 7786 (2000) 552. A. Wolf, M. Reiher, B.A. Hess, J. Chem. Phys. 117, 9215 (2002) 553. N.J.M. Geipel, B.A. Hess, Chem. Phys. Lett. 273, 62 (1997) 554. J.C. Boettger, Phys. Rev. B 57, 8743 (1998) 555. M.D. Jones, J.C. Boettger, R.C. Albers, D.J. Singh, Phys. Rev. B 61, 4644 (2000) 556. J.C. Boettger, A.K. Ray, Int. J. Quantum Chem. 90, 1470 (2002) 557. J.C. Boettger, Int. J. Quantum Chem. 95, 380 (2003) 558. J.C. Boettger, Int. J. Quantum Chem. 100, 845 (2004) 559. J.Yang, M. Dolg, Theor. Chem. Acc. 113, 212 (2005) 560. E.R. Batista, R.L. Martin, P.J. Hay, J. Chem. Phys. 121, 2144 (2004) 561. J.E. Paralta, J. Uddin, G.E. Scuseria, J. Chem. Phys. 122, 084108 (2005) 562. P.H.T. Phillipsen, E. van Lenthe, J.G. Snijders, E.J. Baerends, Phys. Rev. B 56, 13556 (2000) 563. P.H.T. Phillipsen, E.J. Baerends, Phys. Rev. B 61, 1773 (2000) 564. D.Olguin, M. Cardona, A. Cantarero, Solid State Commun. 122, 575 (2002) 565. M. Cardona, M.L. Thewalt, Revs. Mod. Phys. 77, 1173 (2005) 566. L. Colombo, La Rivista del Nuovo Cimento 28, 1 (2005) 567. C.M. Goringe, D.R. Bowler, E. Hernandez, Rep. Progr. Phys. 60, 1447 (1997) 568. R. Dovesi, B. Civalleri, R. Orlando, C. Roetti, V.R. Saunders, Rev. Comput. Chem. 21, 1 (2005) 569. S.G. Semenov, Vestnik LGU, N16, 119 (1973)

References 570. 571. 572. 573. 574. 575. 576. 577. 578. 579. 580. 581. 582. 583. 584. 585. 586. 587. 588. 589. 590. 591. 592. 593. 594. 595. 596. 597. 598. 599. 600. 601. 602. 603. 604. 605. 606. 607. 608. 609. 610. 611. 612. 613.

545

I. Mayer, Int. J. Quantum Chem. 29, 73 (1986) R.A. Evarestov, V.A. Veryazov, Theor. Chim. Acta 81, 95 (1991) R.A. Evarestov, V.A. Veryazov, Rev. Solid State Sci. 5, 415 (1991) R.C. Bochicchio, H.F. Reale, J.A. Medrano, Phys. Rev. B 40, 7186 (1989) V.A. Veryazov, A.V. Leko, R.A. Evarestov, Phys. Solid State 41, 1286 (1999) R.A. Evarestov, A.I. Panin, Int. J. Quantum Chem. 88, 472 (2002) R.C. Bochicchio, H.F. Reale, J. Phys. B 26, 4871 (1993) R.A. Evarestov, A.I. Panin, Phys. Solid State 42, 59 (2000) R.C. Bochicchio, Theochem 429, 229 (1998) R.C. Bochicchio, L.Lain, A. Torre, J. Comput. Chem. 24, 1902 (2003) R.C. Bochicchio, L.Lain, A. Torre, Chem. Phys. Lett. 374, 567 (2003) R.A. Evarestov, V.A. Veryazov, phys. stat. sol. (b) 157, 281, 158, 201 (1990) J. Choisnet, R.A. Evarestov, I.I. Tupitsyn, V.A. Veryazov, phys. stat. sol. (b) 179, 441 (1993) R.A. Evarestov, I.I. Tupitsyn, V.A. Veryazov, Int. J. Quantum Chem. 52, 295 (1994) J. Sichel, M.A. Whitehead, Theor. Chim. Acta 11, 220 (1968) I.D. Brown, J. Solid State Chem. 82, 122 (1989) I.D. Brown, J. Chem. Educat. 77, 1070 (2000) I.D. Brown, J. Appl. Crystallogr. 29, 479 (1996) I.D. Brown, in Structure and Bonding in Crystals, eds. M.O. Keffe, A. Navrotsky, vol. 2, 1 (Academic Press, New York, 1981) P. Marksteiner, P. Blaha, K. Schwarz, Z. Phys. B: Condens. Matter 64, 119 (1986) W.Y. Ching, Y.N. Xu, K.W. Wong, Phys. Rev. B 40, 7684 (1989) P. Saalfrank, M.A. Abdel-Raouf, J. Ladik, R.F. Wood, Phys. Rev. B 41, 8824 (1990) G.H. Hander, P.J. Brown, J. Spalek, J.M. Monig, Phys. Rev. B 40, 4463 (1989) J. Choisnet, J.M. Bassat, H. Pilliere, P. Odier, M. Leblanc, Solid State Commun. 66, 1245 (1988) I.D. Brown, Acta Crystallogr. B 48, 553 (1992) M. Crespin, C. Landorn, P. Odier, J.M. Bassat, P. Mouron, J. Choisnet, J. Solid State Chem. 100, 281 (1992) P. Reinhardt, B.A. Hess, M. Causa, Int. J. Quantum Chem. 58, 297 (1996) J. Muscat, V. Swamy, N.M. Harrison, Phys. Rev. B 65, 224112 (2002) M.Catti, C. Sandrone, R. Dovesi, Phys. Rev. B 55, 16122 (1997) M.Catti, G. Sandrone, Faraday Disc. 106, 189 (1997) R.A. Evarestov, A.I. Panin, phys. stat. sol. (b) 214, R5 (1999) M.D. Segall, R. Stah, C.J. Pickard, M.C. Payne, Phys. Rev. B 52, 1005 (1996) R.A. Evarestov, A.V. Leko, V.A. Veryazov, phys. stat. sol. (b) 203, R3 (1997) R.A. Evarestov, D.E. Usvyat, V.P. Smirnov, Solid State Commun. 127, 423 (2003) R.A. Evarestov, D.E. Usvyat, V.P. Smirnov, Phys. Solid State 45, 459 (2003) R.A. Evarestov, V.P. Smirnov, D.E. Usvyat, Theor. Chem. Acc. 114, 19 (2005) S. Piskinov, E. Heifets, R. Eglitis, G. Borstel, Comput. Mater. Sci. 29, 165 (2004) M. Veithen, X. Gonze, M. Chosez, Phys. Rev. B 66, 235113 (2002) R.A. Evarestov, V.P. Smirnov, I.I. Tupitsyn, D.E. Usvyat, Int. J. Quantum Chem. 104, 110 (2005) W.C. Lu, C.Z. Wang, T.L. Chan, K. Ruedenberg, K.M. Ho, Phys. Rev. B 70, 041101 (2004). A. Bert, M. Llunell, R. Dovesi, C.M. Zicovich-Wilson, Phys. Chem. Chem. Phys. 5, 5319 (2003) R.A. Evarestov, I.I. Tupitsyn, A.V. Bandura, V.E. Alexandrov, Int. J. Quantum Chem. 106, 2191 (2006) V.P. Smirnov, R.A. Evarestov, Phys. Rev. B 72, 075138 (2005) R.A. Evarestov, A.V. Bandura, V.E. Alexandrov, Phys. Solid State 47, 2248 (2005)

546

References

614. R.A. Evarestov, A.V. Bandura, V.E. Alexandrov, E.A. Kotomin, phys. stat. sol. (b) 242, R11 (2005) 615. S. Gennard, F. Cora, C.R.A. Catlow, J. Phys. Chem. B 103, 10158 (1999) 616. E. Mete, R. Shattaf, S. Ellialtioglu, Phys. Rev. B 68, 035119 (2003) 617. D.Sanchez-Portal, E. Artacho, J.M. Soler, Solid State Commun. 95, 685 (1995) 618. D.Sanchez-Portal, E. Artacho, J.M. Soler, J. Phys.: Condens. Matter 8, 3859 (1995) 619. I.I. Tupitsyn, R.A. Evarestov, V.P. Smirnov, Phys. Solid State 47, 1837 (2005) 620. C.Y. Ren, S.H. Chiou, J. Choisnet, J. Appl. Phys. 99, 23706 (2006) 621. J.S. Lin, A. Quteish, M.C. Payne, V. Heine, Phys. Rev. B 47, 4174 (1993) 622. E. Ruiz, S. Alvarez, P. Alemany, Phys. Rev. B 56, 7189 (1997) 623. R.A. Evarestov, D.E. Usvyat, V.P. Smirnov, Phys. Solid State 45, 2072 (2003) 624. P.A. Cox, Transition Metal Oxides (Carendon Press, Oxford, 1992) 625. C.N.R. Rao, B. Raveau, Transition Metal Oxides (VCH Publishers, New York, 1995) 626. W.E. Pickett, Rev. Mod. Phys. 61, 433 (1989) 627. N.M. Harrison, V.R. Saunders, R. Dovesi, W.C. Mackrodt, A.S. Alexandrov, C.N.R. Rao, J.N. Murrell, R.L. Johnston, D.E. Logan, Philos. Trans. Roy. Soc.London A 356, 75 (1998) 628. M.D. Towler, N.L. Allan, N.M. Harrison, V.R. Saunders, W.C. Mackrodt, E. Apra, Phys. Rev. B 50, 5041 (1994) 629. M. Catti, G. Valerio, R. Dovesi, Phys. Rev. B 51, 7441(1995) 630. M. Catti, G. Sandrone, G. Valerio, R. Dovesi, J. Phys. Chem. Solids 57, 1735 (1996) 631. A. Chartier, P. DArco, R. Dovesi, V.R. Saunders, Phys. Rev. B 60, 14042 (1999) 632. E. Ruiz, M. Llunell, P. Alemany, J. Solid State Chem. 176, 400 (2003) 633. I.d.P.R. Moreira, R. Dovesi, Phys. Rev. B 67, 134513 (2003) 634. Y.-S. Su, T.A. Kaplan, S.D. Mahanti, J.F. Harrison, Phys. Rev. B 61, 1324 (2000) 635. M. Nicastro, C.H. Patterson, Phys. Rev. B 65, 205111 (2002) 636. G. Trimarchi, N. Binggeli, Phys. Rev. B 71, 035101 (2005) 637. P. Pavindra, A. Kjekshus, H. Fjellvag, A. Delin, O. Eriksson, Phys. Rev. B 65, 064445 (2002) 638. D.Munoz, N.M. Harrison, F. Illas, Phys. Rev. B 69, 085115 (2004) 639. R.A. Evarestov, E.A. Kotomin, Yu. A. Mastrikov, D.Gryaznov, E. Heifets, J. Maier, Phys. Rev. B 72, 124411 (2005) 640. N.N. Kovaleva, A.V. Boris, C. Bernhard, A. Kulakov, A. Pimenov, A.M. Balbashov, G. Khaliullin, B. Keimer, Phys. Rev. Lett. 93, 147204 (2004) 641. F. Moussa, M. Hennion, J. Rodriguez-Carvajal, H. Moudden, L. Pinsard, A. Revcolevschi, Phys. Rev. B 54, 15149 (1996) 642. N. Hamada, H. Sawada, I. Solovyev, K. Terakura, Physica B237238, 11 (1997) 643. R. Lorenz, R. Hafner, D. Spisak, J. Hafner, J. Magn. Reson., Ser. A 226230, 889 (2001) 644. P. Ravindran, A. Kjekshus, H. Fjellvag, A. Delin, O. Eriksson, Phys. Rev. B 65, 064445 (2002) 645. T. Saitoh, A.E. Boquet, T. Mizokawa, H. Namatame, A. Fujimori, M. Abbate, Y. Takeda, M. Takano, Phys. Rev. B 51, 13942 (1995) 646. TH. Lonkai, D.G. Tomuta, U. Amann, J. Ihringer, R.W.A. Hendrikx, D.M. Tobbens, J.A. Mydosh, Phys. Rev. B 69, 134108 (2004) 647. M. Fiebig, D.Frolich, K. Kohn, St. Leute, T.H. Lottermoser, V.V. Pavlov, R.V. Pisarev, Phys. Rev. Lett. 84, 5620 (2000) 648. D.G. Tomuta, S. Ramakrishnan, G.J. Nieuwenhuys, J.A. Mydosh, J. Phys.: Condens. Matter 13, 4543 (2001) 649. C. Degenhardt, M. Fiebig, D.Frolich, TH. Lottermoser, R.V. Pisarev, Appl. Phys. B 73, 139 (2001) 650. M.C. Qian, J. Dong, Q. Cheng, Phys. Lett. A 270, 96 (2000)

References

547

651. J.E. Medvedeva, V.I. Anisimov, M.A. Korotin, O.N. Mryasov, A.J. Freeman, J. Phys.: Condens. Matter 12, 4947 (2000) 652. A.M. Kalashnikova, R.V. Pisarev, JETP Lett. 78, 3 (2003) 653. T. Bredow, K. Jug, R.A. Evarestov, phys. stat. sol. (b) 243, R10 (2006) 654. M. Bieringer, J.E. Greedan, J. Solid State Chem. 143, 132 (1999) 655. J. Park, J.-G. Park, G.S. Jeon, H.Y. Choi, C. Lee, W. To, R. Bewley, K.A. McEwen, T.G. Perring, Phys. Rev. B 68, 104426 (2003). 656. P. Pulay, Mol. Phys. 17, 197 (1969) 657. H.B. Schlegel, Theor. Chem. Acc. 103, 294 (2000) 658. S. Hirata, H. Tori, M. Tatsumi, Phys. Rev. B 57, 11994 (1998) 659. D.Jacquemin, J.M. Andre, B. Champagne, J. Chem. Phys. 111, 5306, 5324 (1999) 660. B. Civalleri, Ph.D’Arco, R. Orlando, V.R. Saunders, R. Dovesi, Chem. Phys. Lett. 348, 131 (2001) 661. K. Doll, V.R. Saunders, N.M. Harrison, Int. J. Quantum Chem. 82, 1 (2001) 662. K. Doll, Comput. Phys. Commun. 137, 74 (2001) 663. K. Doll, R. Dovesi, R. Orlando, Theor. Chem. Acc. 112, 394 (2004) 664. K. Doll, R. Dovesi, R. Orlando, Theor. Chem. Acc., published online, (2005) 665. R. Dovesi, Lecture Notes in Chem. 67, 179 (1996) 666. K. Rosciszewski, K. Doll, B. Paulus, P. Fulde, Phys. Rev. B 57, 14667 (1998) 667. Handbook of Chemistry and Physics, ed. R.C. Weast, CRC, Boca Raton, FL (1987) 668. B.J. Kennedy, C.J. Howard, B.C. Chakoumakos, Phys. Rev. B 59, 4023 (1999) 669. F. Pascale, C.M. Zicovich-Wilson, F. Lopez, B. Civalleri, R. Orlando, R. Dovesi, J. Comput. Chem. 25, 888 (2004) 670. S. Baroni, S. de Gironcoli, A.Dal Corso, P. Giannozzi, Rev. Mod. Phys. 73, 515 (2001) 671. K. Parlinski, Z.Q. Li, Y. Kawazoe, Phys. Rev. Lett. 78, 4063 (1997) 672. P. Sikora, J. Phys. Chem. Solids 66, 1069 (2005) 673. B. Montanari, B. Civalleri, C.M. Zicovich-Wilson, R. Dovesi, Int. J. Quantum Chem. 106, 1703 (2006) 674. M. Principe, F. Pascale, C.M. Zicovich-Wilson, V.R. Saunders, R. Orlando, R. Dovesi, Phys. Chem. Miner. 31, 559 (2004) 675. P. Umari, A. Pasquarello, A. Dal Corso, Phys. Rev. B 63, 094305 (2001) 676. B. Montanari, N.M. Harrison, Chem. Phys. Lett. 364, 528 (2002) 677. S. Na-Phattalung, M.F. Smith, K. Kim, M.H. Du, S.H. Wei, S.B. Zhang, S. Limpijumnong, Phys. Rev. B 73, 125205 (2006) 678. R.A. Evarestov, in Computational Materials Science, NATO Science Series III, 187, 122 (2003) 679. R.A. Evarestov, phys. stat. sol. (a) 202, 235 (2005) 680. R.A. Evarestov, S. Piskunov, E.A. Kotomin, G. Borstel, Phys. Rev. B 67, 064101 (2003) 681. R.A. Evarestov, V.P. Smirnov, phys. stat. sol. (b) 201, 75 (1997) 682. R.A. Evarestov, P.W.M. Jacobs, A.V. Leko, Phys. Rev. B 54, 8969 (1996) 683. R.A. Evarestov, V.P. Smirnov, phys. stat. sol. (b) 215, 949 (1999) 684. C. Freyria-Fava, R. Dovesi, V.R. Saunders, M.Leslie, C. Roetti, J. Phys.: Condens. Matter 5, 4793 (1993) 685. L.N. Kantorovich, J.M. Holender, M.J. Gillan, Surf. Sci. 343, 221 (1995) 686. C.W.M. Castelone, S. Mirb, Phys. Rev. B 70, 175202 (2004) 687. C. Pisani, Phase Trans. 52, 123 (1994) 688. M. Leslie, M.J. Gillan, J. Phys. C: Solid State Phys. 18, 973 (1985) 689. G. Makov, M.C. Payne, Phys. Rev. B 51, 4014 (1995) 690. J. Lento, J.L. Mozos, R.M. Nieminen, J. Phys.: Condens. Matter 14, 2637 (2002) 691. U. Gerstmann, P. Deak, R. Rurali, B. Aradi, TH. Frauenheim, H. Overhof, Physica B 340-342, 190 (2003) 692. C.W.M. Castletone, A. Hoglund, S. Mirbt, Phys. Rev. B 73, 035215 (2006)

548

References

693. J. Shim, E.Lee, Y. Lee, R.M. Niemenen, Phys. Rev. B 71, 035206 (2005) 694. J.M. Vail, D.Schindel, A. Yang, O. Penner, R. Pandy, S.H. Jiang, M. Blanco, A. Costales, J. Phys. C: Condens. Matter 16, 3371 (2004) 695. A. Gulans, R.A. Evarestov, I. Tale, phys. stat. sol. (c) 2, 507 (2005) 696. C. Sousa, Coen de Graaf, F. Illas, Phys. Rev. B 62, 10013 (2000) 697. R.A. Evarestov, A.R. Sokolov, A.V. Leko, V.A. Veryazov, J. Phys.: Condens. Matter 1, 6611 (1989) 698. B.T. Plachenov, A.R. Sokolov, R.A. Evarestov, Fiz. Tverdogo Tela 28, 867 (1986) 699. A.V. Bandura, R.A. Evarestov, phys. stat. sol. (b) 64, 635 (1974) 700. O. Daniliv, L. Kantorovich, J. Phys. C:Condens. Matter 16, 7233 (2004) 701. C. Pisani, F. Cora, R. Nada, S. Casassa, Comp. Phys. Commun. 82, 139 (1994) 702. C. Pisani, U. Birkenheuer, Comp. Phys. Commun. 96, 221 (1996) 703. C.Pisani, U. Birkenheuer, C. Casassa, F. Cora, EMBED01 User’s Manual, University of Torino, Torino (1999) 704. V. Sulimov, S. Casassa, C. Pisani, J. Garapon, B. Poumelle, Modeling Simul. Mater. Sci. Eng. 8, 763 (2000) 705. E. Scorza, U. Birkenheuer, C. Pisani, J. Chem. Phys. 107, 9645 (1997) 706. C. Pisani, F. Cora, R. Dovesi, R. Orlando, J. Elect. Spectrosc. Relat. Phenom. 69, 1 (1994) 707. http://wgc.chem.pu.ru/ valera/cndo/manual.html 708. T. Brudevoll, E.A. Kotomin, N.E. Christensen, Phys. Rev. B 53, 7731 (1996) 709. Y.N. Hu, Z.Q. Gu, X.F. Zhong, W.Y. Ching, Phys. Rev. B 56, 7277 (1997) 710. A. Stashans, E. Kotomin, J.L. Calais, Phys. Rev. B 49, 14854 (1994) 711. I. Tanaka, K. Tatsumi, M. Nakano, H. Adachi, J. Am. Ceram. Soc. 85, 68 (2002) 712. K. Matsunaga, T. Tanaka, T. Yamamoto, Y. Ikuhara, Phys. Rev. B 68, 085110 (2003) 713. F. Janetzko, R.A. Evarestov, T. Bredow, K. Jug, phys. stat. sol. (b) 241, 1032 (2004) 714. F. Janetzko, T. Bredow, K. Jug, J. Chem. Phys. 116, 8994 (2002) 715. M. Catti, G. Valerio, R. Dovesi, M. Causa, Phys. Rev. B 49, 14179 (1994) 716. W. Choi, A. Termin, M.R. Hoffmann, J. Phys. Chem. 98, 13669 (1994) 717. D.Morris, R. Dixon, F.H. Jones, Y. Dou, R. Egdell, S.W. Downes, G. Beamson, Phys. Rev. B 55, 16083 (1997) 718. T. Umebayashi, T. Yamaki, H. Itoh, K. Asai, J. Phys. Chem. Solids 63, 1909 (2002) 719. L.A. Errico, G. Fabricius, M. Renteria, Z. Naturforsch. 55, 267 (2000) 720. A. Stashans, S. Llunell, R. Bergstrom, A. Hagfeldt, S. Lundquist, Phys. Rev. B 53, 159 (1996) 721. A. Stashans, S. Llunell, R.W. Grimes, J. Phys. Chem. Solids 57, 1293 (1996) 722. R.I. Eglitis, E.A. Kotomin, G. Borstel, Defects Diffus. Forum 226-228, 169 (2004), online at http://www.scientific.net 723. H. Donnerberg, A. Birkholz, J. Phys.: Condens. Matter 12, 8239 (2000) 724. H. Moriwake, Int. J. Quantum Chem. 99, 824 (2004) 725. A. Shigemi, T. Wada, Jpn. J. Appl. Phys. 43B, 6793 (2004) 726. J.P. Buban, H. Iddir, S. Ogut, Phys. Rev. B 69, R180102 (2004) 727. S.A. Prosandeyev, A.V. Fisenko, A.I. Riabchinski, I.A. Osipenko, I.P. Raevski, N. Safontsera, J. Phys.: Condens. Matter 8, 6705 (1996) 728. J. Robertson, J. Appl. Phys. 93, 1054 (2003) 729. T. Tanaka, K. Matsunaga, Y. Ikuhara, T. Yamamoto, Phys. Rev. B 68, 205213 (2003) 730. J. Carrasco, F. Illas, N. Lopez, E.A. Kotomin, Yu. F. Zhukovskii, S. Piskunov, J. Maier, K. Hermansson, phys. stat. sol. (c) 2, 153 (2005) 731. D.Ricci, G. Bano, G. Pacchioni, F. Illas, Phys. Rev. B 68, 224105 (2003) 732. R.A. Evarestov, E.A. Kotomin, Yu. F. Zhukovskii, Int. J. Quantum Chem. 106, 2173 (2006) 733. P.A. Cox, Transition Metal Oxides; Clarendon Press, Oxford, UK (1995)

References

549

734. R. Astala, P.D. Bristowe, Simul. Mater. Sci. Eng. 9, 415 (2001) 735. K. Szot, W. Speier, R. Carius, U. Zastrow, W. Beyer, Phys. Rev. Lett. 88, 075508 (2002) 736. D.E. Usvyat, R.A. Evarestov, V.P. Smirnov, Int. J. Quantum Chem. 100, 352 (2004) 737. R. Moos, K.H. Saerdtl, J. Am. Ceram. Soc. 80, 2549 (1997) 738. D.Ricci, G. Bano, G. Pacchioni, F. Illas, Phys. Rev. B 68, 224105 (2003) 739. J. Crawford, P.W.M. Jacobs, Solid State Chem. 144, 423 (1999) 740. G. Kresse, J. Hafner, VASP Guide, University of Vienna, Austria, 2003 741. M.G. Brik, J. Phys. Chem. Solids 67, 856 (2006) 742. F.M. Michel-Calendini, K.A. Muller, Solid State Commun. 40, 255 (1981) 743. M.O. Selme, P. Pecheur, G. Toussaint, J. Phys. C: Solid State Phys. 17, 5185 (1984) 744. H. Donnerberg, Phys. Rev. B 50, 9053 (1994) 745. A.V. Postnikov, A.I. Poteryaev, G. Borstel, Ferroelectrics 206–207, 69 (1998) 746. R.I. Eglitis, A.V. Postnikov, G. Borstel, phys. stat. sol. (b) 209, 187 (1998) 747. I.I. Tupitsyn, A. Deineka, V.A. Trepakov, L. Jastrabik, S.E. Kapphan, Phys. Rev. B 64, 195111 (2001) 748. R.K. Astala, P.D. Bristowe, Model. Simul. Mater. Sci. Eng. 12, 79 (2004) 749. R. Waser, T. Bieger, J. Maier, Solid State Commun. 76, 1077 (1990) 750. J. Fleig, K.D. Kreuer, J. Maier, in Handbook of Advanced Ceramics, Elsevier, Singapore, 2003, p.57 751. G. Banach, W.M. Temmerman, Phys. Rev. B 69, 054427 (2004) 752. H. Zenia, G.A. Gehring, G. Banach, W.M. Temmerman, Phys. Rev. B 71, 024416 (2005) 753. J. Geck, P. Wochner, D.Bruns, B. Buchner, U. Gebhardt, S. Kiele, P. Reutler, A. Revcolevschi, Phys. Rev. B 69, 104413 (2004) 754. D.Fuks, L. Bakaleinikov, E.A. Kotomin, J. Felsteiner, A. Gordon, R.A. Evarestov, D. Gryaznov, J. Maier, Solid State Ion. 177, 217 (2006) 755. J.K. Perry, J. Tahir-Kheli, W.A. Goddard III, Phys. Rev. B 63, 144510 (2001) 756. D.Fuks, S. Dorfman, S. Piskunov, E.A. Kotomin, Phys. Rev. B 71, 014111 (2005) 757. D.Fuks, S. Dorfman, E.A. Kotomin, Yu. Zhukovskii, A.M. Stoneham,Phys. Rev. Lett. 85, 4333 (2000) 758. D.Fuks, S. Dorfman, J. Felsteiner, L. Bakaleinikov, A. Gordon, E.A. Kotomin, Solid State Ion. 173, 107 (2004) 759. L. Rormark, S. Stolen, K. Wik, T. Grande, J. Solid State Chem. 163, 186 (2002) 760. A.G. Kchachaturyan, Theory of Structural Transformations in Solids, Wiley, New York, 1983 761. International Tables for Crystallography, volume E, Subperiodic Groups, eds. V. Kopsky, D.B. Litvin (Kluwer Academic Publishers, Dodrecht/Boston/London, 2002) 762. V. Kopsky, Acta Cryst. A 45, 805, 816 (1989) 763. V. Kopsky, Acta Cryst. A 56, 370 (2000) 764. E.A. Wood, Bell Telephone Tech. J. 43, 541 (1964) 765. V.P. Smirnov, P. Tronc, Phys. Solid State 48, 1295 (2006) 766. C. Noguera, Physics and Chemistry at Oxide Surfaces, Cambridge Univeristy Press (1996) 767. C. Noguera, J. Phys.: Condens. Matter 12, R367 (2000) 768. F. Finocchi, F. Bottin, C. Noguera, in Computational Materials Science, eds. C.R.A. Catlow, E.A. Kotomin, IOS Press, 2003, p.196 769. T. Bredow, G. Geudtner, K. Jug, J. Chem. Phys. 105, 6395 (1996) 770. R.A. Evarestov, T. Bredow, K. Jug, Phys. Solid State 43, 1774 (2001) 771. T. Bredow, K. Jug, Chem. Phys. Lett. 223, 89 (1994) 772. P.W. Tasker, J. Phys. C: Solid State Phys. 12, p (1979) 773. J.C. Boettger, Phys. Rev. B 49, 16798 (1994)

550 774. 775. 776. 777. 778. 779. 780. 781. 782. 783. 784. 785. 786. 787. 788. 789. 790. 791. 792. 793. 794. 795. 796. 797. 798. 799. 800. 801. 802. 803. 804.

805. 806. 807. 808. 809. 810. 811. 812. 813. 814.

References V. Fiorentini, M.J. Methfesse, J. Phys.: Condens. Matter 8, 6525 (1996) L. Fu, E. Yaschenko, L. Resta, Phys. Rev. B 60, 2697 (1999) R.A. Evarestov, A.V. Bandura, Int. J. Quantum Chem. 100, 452 (2004) R.A. Evarestov, A.V. Bandura, Int. J. Quantum Chem. 96, 282 (2002) L.N. Kantorovich, M.J. Gilan, Surf. Sci. 374, 373 (1997) P. Reinhardt, B. Hess, Phys. Rev. B 50, 12015 (1994) R.A. Evarestov, V.P. Smirnov, D.E. Usvyat, Int. J. Quantum Chem. 104, 102 (2005) G. Fernandes-Cata, L.G. Alvarez, R. Dovesi, C.M. Zicovich-Wilson, J. Phys. Chem. B 106, 7316 (2004) S.P. Bates, G. Kresse, M.G. Gillan, Surf. Sci. 385, 386 (1997) U. Diebold, Surf. Sci. Rep. 48, 53 (2003) M. Calatayud, B. Mguig, C. Minot, Surf. Sci. 526, 297 (2003) M. Calatayud, A. Markovits, M. Menetrey, B. Mguig, C. Minot, Catal. Today 85, 125 (2003) M. Menetrey, A. Markovits, C. Minot, G. Pacchioni, J. Phys. Chem. B 108, 12858 (2004) C. Noguera, F. Finocci, J. Goniakowski, J. Phys.: Condens. Matter 16, S2509 (2004) T. Bredow, L. Giordano, F. Cinquini, G. Pacchioni, Phys. Rev. B 70, 035419 (2004) M. Calatayud, C. Minot, Surf. Sci. 552, 169 (2004) A.V. Bandura, D.G. Sykes, V. Shapovalov, T.N. Truong, J.D. Kubicki, R.A.Evarestov, J. Phys. Chem. B 108, 7844 (2004) A.V. Bandura, J.O. Sofo, J.D. Kubicki, J. Phys. Chem. B 110, 8386 (2006) S.J. Thompson, S.P. Lewis, Phys. Rev. B 73, 073403 (2006) K.J. Hameeuw, G. Cantele, D.Ninno, F. Trani, G. Iadonisi, J. Chem. Phys. 124, 024708 (2006) M.L. Sushko, A.Yu. Gal, A.L. Shluger, J. Phys. Chem. B 110, 4853 (2006) G.U. von Oertzen, A.R. Gerson, Int. J. Quantum Chem. 106, 2054 (2006) P. Persson, A. Stashans, R. Bergstrom, S. Lunell, Int. J. Quantum Chem. 70, 1055 (1998) K. Jug, G. Geudtner, J. Mol. Cat. A 119, 143 (1997) T. Brinkley, M. Dietrich, T. Engel, P. Farral, G. Gantner, A. Schafer, A. Szuchmacher, Surf. Sci. 395, 292 (1998) N.M. Harrison, X.G. Wang, J. Muskat, M. Scheffer, Faraday Discuss. 114, 305 (1999) J. Leconte, A. Markovits, M.K. Skalli, C. Minot, A. Belmajdoub, Surf. Sci. 497, 194 (2002) E.V. Stefanovich, T.N. Truong, J. Phys. Chem. B 102, 3018 (1998) J. Goniakowski, M.J. Lindan, Surf. Sci. 350, 145 (1996) P.J.D. Lindan, N.M. Harrison, J.M. Holender, M.J. Gillan, Phys. Rev. Lett. 80, 762 (1998) G. Charlton, P.B. Howes, C.L. Nickin, P. Steadman, J.S.G. Taylor, C.A. Muryn, S.P. Harte, J. Mercer, R. McGrath, D. Norman, T.S. Turner, G. Thornton, Phys. Rev. Lett. 78, 495 (1997) E.V. Stefanovich, T.N. Truong, Chem. Phys. Lett. 299, 623 (1999) T.T. Rantala, T.S. Rantala, V. Lannto, Surf. Sci. 420, 103 (1999) J. Oviedo, M.J. Gillan, Surf. Sci. 463, 93 (2000) I. Manassidis, J. Goniakowski, L.N. Kantorovich, M.J. Gillan, Surf. Sci. 339, 258 (1995) J. Goniakowski, M.J. Gillan, Surf. Sci. 350, 145 (1996) S.P. Bates, Surf. Sci. 512, 29 (2002). P.J.D. Lindan, Chem. Phys. Lett. 328, 325 (2000) M. Calatayud, J. Andrus, A. Beltrn, Surf. Sci. 430, 213 (1999) F. Ciriaco, L. Cassidei, M. Cacciatore, G. Petrella, Chem. Phys. 303, 55 (2004) M. Melle-Franco, G. Pacchioni, Surf. Sci. 461, 54 (2000)

References

551

815. F.R. Sensato, R. Custdio, M. Calatayud, A. Beltron, J. Andrus, J.R. Sambrano, E. Longo, Surf. Sci. 511, 408 (2002) 816. R.A. Evarestov, A.V. Bandura, E.V. Proskurov, phys. stat. sol. (b) 243, 1823 (2006) 817. A.V. Postnikov, P. Entel, P. Ordejon, Phase Trans. 75, 143 (2002) 818. Y. Yamaguchi, K. Tabata, T. Yashima, J. Mol. Struct. (Theochem) 714, 221 (2005) 819. H. Szuber, G. Czempik, R. Larciprete, B. Adamowicz, Sens. Actuators B Chem. 70, 177 (2000) 820. J.M. Themlin, R. Sporken, J. Darville, R. Caudano, J.M. Gilles, R.L. Johnson, Phys. Rev. B 42, 11914 (1990). 821. A.L. Dawar, J.C. Joshi, J. Mater. Sci. 19, 1 (1984) 822. V.A. Gercher, D.F. Cox, Surf. Sci. 322, 177 (1995) 823. T. Hiemstra, H. Yong, W.H. van Riemsdijk, Langmuir 15, 5942 (1999) 824. S. Piskunov, E.A. Kotomin, E. Heifets, J. Maier, R.I. Eglitis, G. Borstel, Surf. Sci. 575, 75 (2005) 825. R.A. Evarestov, A.V. Bandura, V.E. Alexandrov, phys. stat. sol. (b) 246, 1013 (2006) 826. N. Erdman, K.R. Poeppelmeier, M. Asta, O. Warschkow, D.E. Ellis, L.D. Marks, Nature 419, 55 (2002) 827. A. Ikeda, T. Nishimura, T. Morishita, Y. Kido, Surf. Sci. 433–435, 520 (1999). 828. G. Charlton, S. Brennan, C.A. Muryn, R. McGrath, D.Norman, T.S. Turner, G. Thornton, Surf. Sci. 457, L376 (2000). 829. J. Padilla, D. Vanderbilt, Surf. Sci. 418, 64 (1998) 830. N.V. Krainyukova, V.V. Butskii, Surf. Sci. 454, 628 (2000) 831. E. Heifets, R.I. Eglitis, E.A. Kotomin, J. Maier, G. Borstel, Phys. Rev. B 64, 235417 (2001) 832. E. Heifets, R.I. Eglitis, E.A. Kotomin, J. Maier, G. Borstel, Surf. Sci. 513, 211 (2002) 833. A. Asthagiri, D.S. Sholl, Phys. Rev. B 73, 125432 (2006) 834. K. van Benthem, C. Els¨ asser, J. Appl. Phys. 90, 6156 (2001) 835. Y.S. Lee, J.S. Lee, T.W.Noh, D.Y. Byun, K.S. Yoo, K. Yamaura, E.T. Muromachi, Phys. Rev. B 67, 113101 (2003). 836. Z.Q. Li, J.L. Zhu, C.Q. Wu, Z. Tang, Y. Kawazoe, Phys. Rev. B 58, 8075 (1998) 837. S. Kimura, J. Yamauchi, M. Tsukada, S. Watanabe, Phys. Rev. B 51, 11049 (1995) 838. Yu. F. Zhukovskii, S. Piskunov, E.A. Kotomin, O. Sychev, G. Borstel, Microelectr. Eng. 81, 467 (2005) 839. S. Piskunov, E.A. Kotomin, E.Heifets, Microelectr. Eng. 81, 472 (2005) 840. S. de Lazaro, E. Longo, J.R. Sambrano, A. Bertran, Surf. Sci. 552, 149 (2004) 841. X.Y. Hue, C.L. Wang, W.L. Zhong, Surf. Sci. 550, 73 (2004) 842. G. Borstel, R.I. Eglitis, E.A. Kotomin, E. Heifets, phys. stat. sol.(b) 236, 253 (2003) 843. N. Erdman, L.D. Marks, Surf. Sci. 526, 107 (2003) 844. R. Bader, Atoms in Molecules: A Quantum Theory, Oxford University Press, New York, 1990 845. A. Asthagiri, D.S. Sholl, J. Chem. Phys. 116, 9914 (2002) 846. A. Stashans, F. Erazo, J. Ortiz, P. Valverde, Philos. Mag. B 81, 1977 (2001) 847. Z. Fang, K. Terakura, Surf. Sci. 470, L75 (2000) 848. J. Carrasco, F. Illas, N.Lopez, E.A. Kotomin, Yu. F. Zhukovskii, R.A. Evarestov, Yu. A. Mastrikov, S. Piskunov, J. Maier, Phys. Rev. B 73, 064106 (2006) 849. J. Carrasco, J.R.B. Gomes, F. Illas, Phys. Rev. B 69, 064116 (2004) 850. P. Mori-Sanchez, J.M. Recio, B. Silvi, C. Sousa, A.M. Pendas, V. Luana, F. Illas, Phys. Rev. B 66, 075103 (2002) 851. R.A. Evarestov, E.A. Kotomin, E. Heifets, J. Maier, G. Borstel, Solid State Commun. 127, 367 (2003) 852. R.A. Evarestov, E.A. Kotomin, D.Fuks, J. Felsteiner, J. Maier, Appl. Surf. Sci. 238, 457 (2004)

552

References

853. E. Heifets, E.A. Kotomin, J. Maier, Phys. Chem. Chem. Phys. 5, 4180 (2003) 854. F. Bottin, F. Finocchi, C. Noguera, Phys. Rev. B 68, 035418 (2003) 855. R.A. Evarestov, E.A. Kotomin, Yu. A. Mastrikov, D.Gryaznov, E. Heifets, J. Maier, Phys. Rev. B 72, 214411 (2005) 856. http://www.supercomputing.it/software.php?cat=11 857. http://www.msg.ku.edu/ msg/MGM/links/comp.html 858. http://www.redbrick.dcu.ie/ noel/linux4chemistry 859. J.V. Vondele, M. Crack, F. Mohamed, M. Parrinello, T. Chassaing, J. Hutter, Comp. Phys. Commun. 167, 103 (2005) 860. C. Pisani, J. Mol. Struct.(Theochem), 463, 125 (1999) 861. R. Orlando, R. Dovesi, P. Ugliengo, C. Roetti, V.R. Saunders, Int. J. Inorg. Mater. 1, 147 (1999) 862. R. Dovesi, R. Orlando, C. Roetti, C. Pisani, V.R. Saunders, phys. stat. sol. (b) 217, 63 (2000) 863. C. Pisani, R. Dovesi, C. Roetti, M. Causa, R. Orlando, S. Casassa, V.R. Saunders, Int. J. Quantum Chem. 77, 1032 (2000) 864. G.Te Velde, F.M. Bickelhaupt, E.J. Baerends, C.F. Guerra, S.J.A. VAN Gisbergen, J.G. Snijders, T. Ziegler, J. Comput. Chem. 22, 931 (2001) 865. A.E. Mattson, P.A. Schultz, M.P. Desjarlais, T.R. Mattsson, K. Leung, Model. Simul. Mater. Sci.Eng. 13, R1 (2005) 866. B. Delley, J. Chem. Phys. 113, 7756 (2000) 867. H. Eschrig, K. Koepernik, I.Chaplygin, J. Solid State Chem. 176, 482 (2003) 868. S.D. Kenny, A.P. Horsfield, H. Fujitani, Phys. Rev. B 62, 4899 (2000) 869. R.A. Evarestov, I.I. Tupitsyn, V.A. Veryazov, Int. J. Quantum Chem. 52, 295 (2004) 870. J.J.P. Stewart, J. Mol. Mod. 10, 155 (2004) 871. L. Kantorovich, A. Stashans, E. Kotomin, P.W.M. Jacobs, Int. J. Quantum Chem. 52, 1177 (1994) 872. B. Civalleri, F. Napoli, Y. Noel, C. Roetti, R. Dovesi, Cryst. Eng. Commun. 8, 364 (2006), see online www.rsc.org/crystengcomm 873. http://www.ccr.jussieu.fr/ccr/Documentation/Calcul/ XCRYSDEN/Documentation.html 874. A. Kokalj, Comput. Mater. Sci. 28, 155 (2003) 875. http://www.ivec.org/GULP/

Index

Adiabatic approximation

105

Band representation 78 - SrZrO3 crystal 84 - MgO and Si crystals 84 Basic translation vectors 11 Basis sets in molecular calculations - localized atomic-like orbitals - Gaussian-basis notations 290 - Gaussian-type orbitals 285 - Slater-type orbitals 283, 285 - correlation-consistent basis 291 - minimal-basis set 287 - polarization functions 288 Basis sets in periodic calculations - localized atomic-like orbitals 283 - Gaussian-type basis 294 - basis set superposition error 297 - molecular-basis adaptation 291 - plane waves 281 Boundless crystal 10 Bravais lattice 11 - 2D (plane) 460 - base-centered 12 - body-centered 12 - cubic 14 - face-centered 12 - hexagonal 14 - monoclinic 12 - orthorhombic 13 - parameters 12 - point symmetry 11 - primitive 12 - tetragonal 14 - triclinic 12, 14 - type 12

Brillouin zone - special points 126 - Monkhorst–Pack 129 - cubic crystals 128 - modified Monkhorst–Pack 130 - supercell generation 127 - symmetry line 57 - symmetry point 57 Bulk crystals - Compton profile - Cu2 O 383 - band structure - MgO, TiO2 377 - bulk moduli,elastic constants - SrTiO3 , BaTiO3 , PbTiO3 402 - bulk modulus - Cu2 O 399 - TiO2 phases 401 - cohesive energy - TiO2 396 - corundum-like oxides 397 - cyclic cluster model - Al2 O3 431 - density of states - SrTiO3 , SrZrO3 380 - projected density of states 379 - electron-density maps - Cu2 O 382 - electron-momentum density - Cu2 O 383 - magnetic structure - LaMnO3 385, 388 - ScMnO3 391 - phonon symmetry - TiO2 405 - polymorphs

554

Index

- SrZrO3 403 - structure parameters - SnO2 (110) 496 - TiO2 396 - supercell model - SrTiOO3 446 - total energy - cohesive energy 394 - vibrational frequences - TiO2 407 - calculation 404 Chemical bonding in crystals - Wannier functions for valence bands - crystalline oxides 358 - localized orbitals - local electronic structure properties 363 - Wannier-type atomic functions - PbTiO3 354 - SrTiO3 ,BaTiO3 353 - local properties of electronic structure 351 - bulk crystal 342, 344, 347 - TiO,TiO2 ,Ti2 O3 - crystallographic valence - crystalline oxides 335 - cyclic cluster - crystalline oxides 334, 335 339 - Cu4 O3 , Pb2 O3 , Pb3 O4 - La2 CuO4 ,La2 NiO4 341 - YBa2 Cu3 O7 340 - density matrix - LCAO 328 - natural orbitals 330, 332 - electron correlation - molecular-crystalline approach 332 - Ti2 O3 349 - local properties of electronic structure - atomic population 329 - bond order,covalency 329 - total atomic valency 330 - localized orbitals - MgO 368 - SrZrO3 364, 368 - population analysis - projection technique 369 - projection technique - Si, SiC, GaAs, MgO, TiO2 370 372, 374 - SrTiO3 , SrZrO3 Computer programs for LCAO calculations 527

Conventional unit cell 15 Crystal structure - cubic - zincblende 31 - antifluorite 31 - cesium chloride 32 - diamond 29 - fluorite 31 - perovskite 33 - rocksalt 30 - database 27 - description 26 - hexagonal - ScMnO3 45 - graphite 43 - wurtzite ZnS 45 - orthorhombic - LaMnO3 38 - rhombohedral - αAl2 O3 , corundum 46 - tetragonal - La2 CuO4 37 - YBa2 Cu3 O7 41 - anatase 36 - rutile 35 - type 26 Crystal system - cubic 12 - hexagonal 12 - monoclinic 12 - orthorhombic 12 - rhombohedral 12 - syngony 11, 12 - tetragonal 12 - triclinic 12 Crystallographic point groups - Sch¨ onflies notation 15 - international notation 15 Density matrix - crystal 133 - LCAO approximation 137 - approximate 140 - properties 133, 135 - cyclic cluster - properties 136 - molecule 107 Density-functional theory (molecules) - Thomas-Fermi model 231 Density-functional theory(crystals) - LCAO approximation 250

Index - HSE screened Coulomb hybrid functional 259 - HSE03 hybrid functional 261 - Kohn–Sham equations 252 - linear-scaling method 253, 256 - screened Coulomb hybrid functional 262 - exchange-correlation functionals 264 - LDA+U method 275 - SIC-LSDA method 271 Density-functional theory(molecules) - Hohenberg–Kohn theorems 232 - Kohn–Sham equations 234, 237 - generalized-gradient approximation GGA - PBE functional 243 - exchange-correlation functionals 242 - local spin density approximation LSDA 239 - local density approximation LDA - exchange-correlation functionals 239 - orbital-dependent exchange-correlation functionals 244 - hybrid functionals 246, 248 Effective core potentials - relativistic 314 - basis sets 318 - generalized 316 - periodic systems 320 Effective core potentials - nonrelativistic - Hay–Wadt potentials 304 - energy-consistent 300 - generation 301 - norm-conserving 302 - pseudo wavefunctions 298 - valence basis-sets 302 - separable embedding potentials 305 - relativistic - Stevens–Basch–Krauss potentials 304 - Stuttgart-Dresden potentials 304 Electron correlation - crystals - Laplace-MP2 174, 177 - embedded cluster 168 - local MP2 method 180, 184 - local electron-correlation methods 164, 166 - method of increments 166, 170, 173 - molecules

555

-

CI-method 151 CISDT-method 153 MCSCF-method 153 coupled cluster-method 154 local electron-correlation methods 158, 162 - perturbation theory 155 - spin correlation 148 Equivalent points of space 8 Group 7 - diperiodic (layer) - plane 460 - point 7 - space 7 - subperiodic 460 - translation 7

460

Hartree–Fock method 107 - Coulomb operator 107 - LCAO approximation - crystals 121, 122 - cyclic cluster 117 - molecules 115 - UHF - crystals 123 - cyclic cluster 222 - exchange operator 108 - local exchange approximation 109 - restricted RHF 112 - restricted for open shells ROHF 114 - self-consistent calculation 108 - symmetry of Fockian 109 - unrestricted UHF 114 Induced representations - of point group 67 - correlation table 69 - of space group - k-basis 74 - q-basis 72 - composite 76 - simple 76 - tables 78 Irreducible representations 7 - of space group - full representation 60 - small(allowed) representation - of translation group - k vector 51 - Bloch functions 52 - Brillouin zone 52

60

556

Index

Layer group - Brillouin zone 464 - element 461 - irreducible representations 464 - setting 461 - site-symmetry 463 - table 462 LCAO and PW basis - Wannier-type atomic functions - MgO 357 Local properties of electronic structure - molecules - Wiberg index 140 - atomic covalence 140 Localized orbitals - crystalline 86, 88, 89 - for valence bands 94 - molecular 70 - generation 71 Molecular cluster 10 Monoatomic crystal 11 Orbits of points 8 - crystallographic 22 - in a crystal 9 - in a molecule 8 Point defects in solids - classification 409 - cyclic-cluster model - F + center in Al2 O3 433 - F center in Al2 O3 432, 434 - formation energy 418 - models - cyclic cluster 411 - cyclically-embedded cluster 424 - molecular cluster 410 - supercell 412 - molecular-cluster model - realization 422 - perturbed-cluster model - MgO 425 - supercell model - realization 417, 420 - F center in SrTiO3 441, 443 - Fe-impurity in SrTiO3 445, 448, 449 - SrTiO3 , BaTiO3 438 - oxygen vacancy in SrTiO3 439 - vanadium-doped T iO2 436 - T iO2 416 - F center in Al2 O3 431

- MgO crystal 415, 419 - binary oxides 426 - charged defects 421 - convergence 423 - interstitial oxygen in MgO 428 - oxygen vacancy in Al2 O3 429 - symmetry 414, 415 Primitive unit cell 11 Projective representations - characters 64 - factor system 62 - of point group 62 Reference unit cell 11 Relativistic theory - molecules - Dirac–Hartree–Fock method 310, 311 - Dirac–Kohn–Sham method 313 Semiempirical LCAO methods 193 - crystals - cyclic cluster 212, 215, 217 - CNDO 209 - Mulliken-R¨ udenberg 201 - extended H¨ uckel 195 - molecules - CNDO 203, 205 - INDO 205 - MNDO 206 - MSINDO 206 - Mulliken-R¨ udenberg 199, 201 - PM3 206 - extended H¨ uckel 194, 196 - cyclic cluster - CNDO 218 - INDO 220 - MSINDO 221 Site-symmetry group 8, 22 - oriented 25 Solid solutions - supercell model - Lac Sr1−c MnO3 453, 455 Space group 17 - 1D 17 - 2D 17 - 3D 17 - designations 18 - elements 17 - nonsymmorphic 18 - plane 17 - symmorphic 18 - table 18

Index Supercell - for centered lattices 16 - transformation 16 - symmetrical 124, 521 Surfaces of crystals - (001) - MgO 471 - cubic perovskites 473 - (110) - T iO2 471 - surface energy - T iO2 (110) 477 - MgO (001) 475, 476 - slab model 474 - SnO2 (110) - atomic charges 499 - BSSE - SnO2 (110) 497 - atomic charges - LaM nO3 (001) 516 - bare surface (001) - SrT iO3 , SrZrO3 507, 509 - cyclic cluster - T iO2 (110) 482 - density of states - SrT iO3 , SrZrO3 (001) 512 - models - molecular cluster 459 - periodic slab (supercell) 459 - semi-infinite crystal 459 - single slab 459 - molecular cluster - T iO2 (110) 483 - T iO2 (110) 484 - slab - SnO2 (110) 496 - surface F center - SrT iO3 (001) 513 - surface energy - LaM nO3 (001) 515, 517 - SnO2 (110) 497 - SrT iO3 , SrZrO3 (001) 511 - water adsorption

- SnO2 (100) 505 - SnO2 (110) 501, 503 - T iO2 (110) 484, 488, 490, 492, 493 Surfaces types - type-1 - MgO 466, 467 - type-2 - TiO2 (110) 468 - type-3 - SrT iO3 , LaM nO 3 469, 470 Symmetry elements 7 Symmetry operations 7 Symmetry properties 48 - of crystalline orbitals 49 - of molecular orbitals 49 - of the Hamiltonian 48 - time-reversal transformation 50 Translation - improper or fractional - proper 17

17

Wannier function 87, 90 - local MP2 method 185 - surface - slab model 478 - surface - M gO (001) 479 - T iO2 (110) 480 - Wannier type atomic orbitals 96 - generation 91, 92, 94 - variational method 97 - comparison of methods 95 - variational method 99, 101 - symmetry - local MP2 method 189 Wavevector - little group 60 - point-symmetry group 57 - star 58 Wyckoff positions - notation 22 - parameter-dependent 22 - parameter-free 22

557