Context and Semantics for Knowledge Management: Technologies for Personal Productivity 9783642195099, 3642195091

Knowledge and information are among the biggest assets of enterprises and organizations. However, efficiently managing,

115 37

English Pages 351 [340] Year 2011

Report DMCA / Copyright

DOWNLOAD PDF FILE

Table of contents :
Context and Semantics for Knowledge Management
Foreword
Contents
Contributors
Part I: Addressing the Challenges of Knowledge Work
Part II: ACTIVE Technologies and Methodologies
Part III: Applying and Validating the ACTIVE Technologies
Part IV: Complementary Activities
Part V: Conclusions
Index
Recommend Papers

Context and Semantics for Knowledge Management: Technologies for Personal Productivity
 9783642195099, 3642195091

  • 0 0 0
  • Like this paper and download? You can publish your own PDF file online for free in a few minutes! Sign Up
File loading please wait...
Citation preview

Context and Semantics for Knowledge Management

Paul Warren

l

John Davies

l

Elena Simperl

Editors

Context and Semantics for Knowledge Management Technologies for Personal Productivity

Editors Paul Warren Eurescom GmbH Wieblinger Weg 19/4 69123 Heidelberg Germany [email protected]

Dr. John Davies British Telecommunications plc. Orion G/11 Ipswich, IP5 3RE Adastral Park United Kingdom [email protected]

Dr. Elena Simperl Karlsruhe Institute of Technology Institute AIFB Englerstr. 11 76128 Karlsruhe Germany [email protected]

ACM Codes: H3, H.4, I.2, J.1

ISBN 978-3-642-19509-9 e-ISBN 978-3-642-19510-5 DOI 10.1007/978-3-642-19510-5 Springer Heidelberg Dordrecht London New York Library of Congress Control Number: 2011937697 # Springer-Verlag Berlin Heidelberg 2011 This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilm or in any other way, and storage in data banks. Duplication of this publication or parts thereof is permitted only under the provisions of the German Copyright Law of September 9, 1965, in its current version, and permission for use must always be obtained from Springer. Violations are liable to prosecution under the German Copyright Law. The use of general descriptive names, registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com)

Foreword

The Web and information technology have become part of our daily lives and an integral part of work. In a short period of time, the way we access and use information has undergone a fundamental change. This is not only due to the fact that technology has enabled us to create new ways of storage and retrieval, and novel forms of content, but it is also related to the increasing amount of information now generated on a constant basis. Knowledge and information form part of the biggest assets of enterprises and organizations. However, efficiently managing, maintaining, accessing, and reusing this intangible asset is difficult. The fact that much of corporate knowledge only resides in employees’ heads seriously hampers reuse and conservation. This problem is not only evident on an organization-wide scale but also for the individual user: knowing where information can be found and which data is relevant for a certain workflow or context is typically a human-driven task where computers provide only limited computational support. In an age where practically every industry is becoming increasingly information based, the problem of information finding, interpreting, and combining is omnipresent for knowledge workers. While a human user can interpret and combine information from different sources, integrate data using heterogeneous formats, or extract essential knowledge from distributed chunks of information, a machine cannot easily handle such a complex task. On the other hand, however, the human user is limited in terms of computational speed. Consequently, both capabilities must be combined and knowledge management systems must allow as much automation as possible to support users and make use of human input where needed. The Semantic Web and semantic technology address these computational challenges and aim to facilitate more intelligent search and smoother data integration. With the recent success of Linked Data the technology has taken a more datacentric and lightweight approach to semantics. Individual pieces of data are often of little value, while the combination and integration of many create a new asset. Still, a human contribution is required in several areas and this contribution can be encouraged by providing incentive mechanisms: either through time saving or other forms of rewards that are made visible to the user. The evolution of the v

vi

Foreword

Web to a Web of people, Web 2.0, brought many examples that demonstrate the power of such motivation mechanisms. This socio-technical combination integrates computational power with human intelligence in order to improve and speed up knowledge work and to create increased knowledge-based value. The ACTIVE project acknowledged the challenge of today’s knowledge workers with a pragmatic approach, integrating semantic technology, the notion of context, the Web 2.0 paradigm, and supporting informal processes. The selection of technologies and the objectives of the project were driven by the fact that enterprises can only partially conserve and reuse their own knowledge. The outcomes of the project are tools and methods that substantially improve the situation for knowledge workers in their daily tasks and increase individual and collaborative productivity. Validated in case studies in large organizations, ACTIVE technology has proven to significantly improve the way users interact with and use information. Common problems of knowledge work could be alleviated by a powerful combination of machine and human intelligence. The results of the project will have an impact on individual and collaborative knowledge worker productivity and on the capture, reuse, sharing, and preservation of knowledge in organizations. Innsbruck

Prof. Dieter Fensel

Contents

Part

I

Addressing the Challenges of Knowledge Work

1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Paul Warren, John Davies, and Elena Simperl

2

Web 2.0 and Network Intelligence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Yasmin Merali and Zinat Bennett

Part

II

ACTIVE Technologies and Methodologies

3

Enterprise Knowledge Structures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Basil Ell, Elena Simperl, Stephan Wo¨lger, Benedikt Ka¨mpgen, Simon Hangl, Denny Vrandecˇic´, and Katharina Siorpaes

4

Using Cost-Benefit Information in Ontology Engineering Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Tobias Bu¨rger, Elena Simperl, Stephan Wo¨lger, and Simon Hangl

5

Managing and Understanding Context . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Igor Dolinsˇek, Marko Grobelnik, and Dunja Mladenicˇ

6

Managing, Sharing and Optimising Informal Knowledge Processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Jose´-Manuel Go´mez-Pe´rez, Carlos Ruiz, and Frank Dengler

7

Machine Learning Techniques for Understanding Context and Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Marko Grobelnik, Dunja Mladenic´, Gregor Leban, and Tadej Sˇtajner vii

viii

Part

Contents

III

Applying and Validating the ACTIVE Technologies

8

Increasing Productivity in the Customer-Facing Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Ian Thurlow, John Davies, Jia-Yan Gu, Tom Bo¨sser, Elke-Maria Melchior, and Paul Warren

9

Machine Learning and Lightweight Semantics to Improve Enterprise Search and Knowledge Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Rayid Ghani, Divna Djordjevic, and Chad Cumby

10

Increasing Predictability and Sharing Tacit Knowledge in Electronic Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 Vadim Ermolayev, Frank Dengler, Carolina Fortuna, Tadej Sˇtajner, Tom Bo¨sser, and Elke-Maria Melchior

Part

IV

Complementary Activities

11

Some Market Trends for Knowledge Management Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 Jesus Contreras

12

Applications of Semantic Wikis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 Michael Erdmann, Daniel Hansch, Viktoria Pammer, Marco Rospocher, Chiara Ghidini, Stefanie Lindstaedt, and Luciano Serafini

13

The NEPOMUK Semantic Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255 Ansgar Bernardi, Gunnar Aastrand Grimnes, Tudor Groza, and Simon Scerri

14

Context-Aware Recommendation for Work-Integrated Learning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275 Stefanie N. Lindstaedt, Barbara Kump, and Andreas Rath

15

Evolving Metaphors for Managing and Interacting with Digital Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303 Natasa Milic-Frayling and Rachel Jones

Contents

Part

16

V

ix

Conclusions

Conclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327 Paul Warren, John Davies, and Elena Simperl

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333

Contributors

Zinat Bennett Independent Consultant, 19 Foxes Way, Warwick, CV34 6AX, UK, [email protected] Ansgar Bernardi German Research Center for Artificial Intelligence (DFKI) GmbH, Postfach 2080, Kaiserslautern, D-67608, Germany, [email protected] Tom Bo¨sser kea-pro, Tal, Spiringen CH-6464, Switzerland, [email protected] Tobias Bu¨rger Capgemini Carl-Wery-Str. 42, Munich D-81739, Germany, [email protected] Jesus Contreras iSOCO, Intelligent Software Components, S.A, Avenida Del Parteno´n, 16-18, Madrid 1 7a 28042, Spain, [email protected] Chad Cumby Accenture Technology Labs, Rue des Cretes, Sophia Antipolis, France, [email protected] John Davies British Telecommunications plc., Orion G/11, Ipswich, IP5 3RE, Adastral Park, United Kingdom, [email protected] Frank Dengler Karlsruhe Institute of Technology, Englerstr. 11, Building 11.40, Karlsruhe 76131, Germany, [email protected] Divna Djordjevic Accenture Technology Labs, Rue des Cretes, Sophia Antipolis, France, [email protected] Igor Dolinsˇek ComTrade d.o.o, Litijska 51, Ljubljana 1000, Slovenia, igor.dolinsek@ comtrade.com Basil Ell Karlsruhe Institute of Technology, KIT-Campus Su¨d, Karlsruhe D-76128, Germany, [email protected] xi

xii

Contributors

Michael Erdmann Ontoprise GmbH, An der RaumFabrik 29, Karlsruhe 76227, Germany, [email protected] Vadim Ermolayev Zaporozhye National University, 66 Zhukovskogo st, Zaporozhye 69600, Ukraine, [email protected] Carolina Fortuna Jozef Stefan Institute, Jamova 39, SI-1000, Ljubljana, Slovenia, [email protected] Rayid Ghani Accenture Technology Labs, Rue des Cretes, Sophia Antipolis, France, [email protected] Chiara Ghidini Fondazione Bruno Kessler, Via Sommarive 18, Povo, I-38122 Trento, Italy, [email protected] Jose´-Manuel Go´mez-Pe´rez iSOCO, Intelligent Software Components, S.A., Avenida Del Parteno´n, 16-18, Madrid, 1 7a 28042, Spain, [email protected] Gunnar Grimnes German Research Center for Artificial Intelligence (DFKI) Gmb, Postfach 2080, Kaiserslautern D-67608, Germany, [email protected] Marko Grobelnik Artificial Intelligence Laboratory, Jozef Stefan Institute, Jamova 39, SI-1000, Ljubljana, Slovenia, [email protected] Tudor Groza DERI & The University of Queensland, School of ITEE, The University of Queensland Level 7, General Purposes South Building (#78), Staffhouse Road, St. Lucia Campus QLD 4072, Australia, [email protected] Jia-Yan Gu British Telecommunications plc., Orion G/11, Ipswich, IP5 3RE, Adastral Park, United Kingdom, [email protected] Simon Hangl STI Innsbruck, University of Innsbruck, Technikerstraße 21a, 6020, Innsbruck Austria, [email protected] Daniel Hansch ontoprise GmbH, An der RaumFabrik 29, Karlsruhe 76227, Germany, [email protected] Rachel Jones Instrata Ltd, 12 Warkworth Street, Cambridge, United Kingdom, [email protected] Benedikt Ka¨mpgen Karlsruhe Institute of Technology, KIT-Campus Su¨d, Karlsruhe D-76128, Germany, [email protected]

Contributors

xiii

Barbara Kump Knowledge Management Institute, TU Graz, Inffeldgasse 21A, Graz, A-8010, Austria, [email protected] Gregor Leban Artificial Intelligence Laboratory, Jozef Stefan Institute, Jamova 39, Ljubljana, SI-1000, Slovenia, [email protected] Stefanie Lindstaedt Know-Center and Knowledge Management Institute TU Graz, Inffeldgasse 21A, Graz A-8010, Austria, [email protected] Elke-Maria Melchior Kea-pro GmbH, Tal, CH-6464 Spiringen, Switzerland, [email protected] Yasmin Merali Warwick Business School, Warwick University, Coventry, CV4 7AL, UK, [email protected] Natasa Milic-Frayling Microsoft Research Ltd, 7 J J Thomson Avenue, Cambridge, United Kingdom, [email protected] Dunja Mladenic´ Artificial Intelligence Laboratory, Jozef Stefan Institute, Jamova 39, Ljubljana SI-1000, Slovenia, [email protected] Viktoria Pammer Know-Center and Knowledge Management Institute TU Graz, Inffeldgasse 21A, Graz A-8010, Austria, [email protected] Andreas Rath Know-Center, GmbH, Inffeldgasse 21A, Graz A-8010, Austria, [email protected] Marco Rospocher Fondazione Bruno Kessler, Via Sommarive 18, Povo, I-38122 Trento, Italy, [email protected] Carlos Ruiz iSOCO, Intelligent Software Components, S.A, Avenida Del Parteno´n, 16-18, Madrid, 1 7a 28042, Spain, [email protected] Simon Scerri DERI, National University of Ireland, Galway, Lower Dangan, Galway, Ireland, [email protected] Luciano Serafini Fondazione Bruno Kessler, Via Sommarive 18, Povo, Trento I-38122, Italy, [email protected] Elena Simperl Karlsruhe Institute of Technology, KIT-Campus Su¨d, Karlsruhe D-76128, Germany, [email protected] Katharina Siorpaes STI Innsbruck, University of Innsbruck, Technikerstraße 21a, Innsbruck 6020, Austria, [email protected]

xiv

Contributors

Tadej Sˇtajner Artificial Intelligence Laboratory, Jozef Stefan Institute, Jamova 39, SI-1000 Ljubljana, Slovenia, [email protected] Ian Thurlow British Telecommunications plc., Orion G/11, Ipswich, IP5 3RE, Adastral Park, United Kingdom, [email protected] Denny Vrandecˇic´ Karlsruhe Institute of Technology / Wikimedia Deutschland e.V, KIT-Campus Su¨d, Karlsruhe D-76128, Germany, [email protected] Paul Warren Eurescom GmbH, Wieblinger Web 19/4, Heidelberg D-69123, Germany, [email protected] Stephan Wo¨lger STI Innsbruck, University of Innsbruck, Technikerstraße 21a, Innsbruck 6020, Austria, [email protected]

Part I

Addressing the Challenges of Knowledge Work

1

Introduction Paul Warren, John Davies, and Elena Simperl

1.1

Motivation for Our Book

Using and interacting with information is an important part of wealth creation in the modern world. For many of us, much of our working time is spent at computer screens and keyboards, and at other information devices. A report by The Radicati Group (2009) indicates that the average corporate worker spends a quarter of his or her time on email-related activities alone. Despite the importance of this activity, we all know that this interaction can be both inefficient and ineffective. The purpose of this book is to describe how a set of technologies can be used to improve the personal and group productivity of those interacting with information. Much of the material for our book comes from the ACTIVE project, which was motivated precisely by the need to improve personal and group productivity. ACTIVE was a European collaborative project which ran from March 2008 until February 2011; an overview of ACTIVE can be found in Simperl et al. (2010). However, this book is not just about ACTIVE. We also discuss how similar and related technologies are being developed and used elsewhere, and we include contributions from other projects using these technologies to respond to the same challenges.

P. Warren (*) Eurescom GmbH, Wieblinger Weg 19/4, D-69123 Heidelberg, Germany e-mail: [email protected] J. Davies British Telecommunications plc., Orion G/11, Ipswich, IP5 3RE, Adastral Park, United Kingdom e-mail: [email protected] E. Simperl Institute AIFB, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany e-mail: [email protected] P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5_1, # Springer-Verlag Berlin Heidelberg 2011

3

4

P. Warren et al.

The people who use our systems undertake what, following the management scientist Peter Drucker, has come to be known as knowledge work. Drucker (1999) identified the increased productivity of manual work as a major distinguishing feature of successful organizations in the twentieth century and saw increased productivity of knowledge work as a similarly distinguishing feature of organizations in the twenty-first century. Our concern in this book is with technology to realize that increased productivity.

1.2

The ACTIVE Project

The ACTIVE project began with the insight that three factors were exerting a significant impact on the efficiency and effectiveness of how we interact with information. Firstly, despite all the technological and organisational efforts which have been applied to improve the sharing and use of knowledge, organisations still fail to make full use of their own knowledge. At the same time that technologies are being developed to address this, so the problem is becoming more complex through the increasing volume of information available to be shared, through the global nature of many organisations, and through modern working practices such as distributed teams and home-working. Secondly, we all of us face an information overload which makes it difficult to find what is relevant to our current task. It is not just that there is too much information; it is that at any given time we only need a part of what is available to us and the sheer volume makes it hard to locate that part. Thirdly, we most of us find the focus of our work changing, sometimes from minute to minute, as we face continual interruptions. These may be in the form of emails, instant message, phone calls, electronic reminders, or even the nagging internal voice which reminds us that there is something we need to do urgently. Each time we switch our task focus we need a different set of information. The overhead of finding and re-finding that information inhibits our productivity. These were the challenges we faced in ACTIVE. In response we saw three technological approaches as being of particular importance: the combination of Web 2.0 and semantic technology; the use of context; and the use of informal processes. We do not see these technologies as stand-alone, but as interrelating to respond to the challenges of personal and group productivity. The synergy of Web 2.0 and semantic technology is viewed as valuable both to share knowledge and to retrieve information. In the last decade, the development of knowledge representation languages based on ontologies, of the corresponding ontology editors, and of reasoners which can make inferences over these languages, has provided powerful ways of finding and manipulating knowledge. There is a perception, though, that the creation and maintenance of ontologies carries a significant overhead. The requirement is to use these technologies but in a more accessible way, i.e. in a way more like that of Web 2.0 applications. In ACTIVE we have two responses to this; through the Semantic MediaWiki (SMW) and through

1 Introduction

5

the use of tagging. The SMW offers users the ability to create and share structured knowledge alongside shared text. In addition, ACTIVE’s enhanced approach to tagging helps the user to create tags and to use those tags for information retrieval. The use of context is crucial both to locating the information relevant to us at any given time and to reducing the overhead of switching tasks. In fact, the word context means different things in different communities. To some it means characteristics such as location, or the kind of device a person is using. Our interest is in task context. By this we mean a grouping of information objects required by a user for a particular task. These information objects could be documents, spreadsheets, emails, images, or even people, e.g., represented by contact details. The point is that they form a grouping which enables a user, or group of users, to better perform their work. Viewed from the system, a context is used by an agent to define the current working focus and determine working priorities (Ermolayev et al. 2010). For an overview of how context is used in ACTIVE, see Warren et al. (2010). We use the term informal processes to describe the procedures which we all of us create and use to undertake our work. We differentiate between business processes, which are created by the organisation and the informal processes which we create ourselves. The problem with the latter is that they are frequently not well described. Because of this they are not shared and hence reinvented many times in an organisation. Moreover, because they are not shared, they are not subject to the peer-review which leads to improvement. Hill et al. (2006) call these artful business processes, because “there is an art to their execution that would be extremely difficult, if not impossible, to codify in an enterprise application”. ACTIVE has developed tools to make it easier to create, share, view and edit such processes. We hope that these tools will help ordinary employees, rather than business process designers, to create and share their own processes. From the scientific standpoint, in ACTIVE we were testing three hypotheses: • That the use of lightweight ontologies and tagging offers measurable benefits to the management of corporate knowledge without offering significant user barriers. • That the use of context helps users cope with information overload, and mitigate the effects of continual switching of task focus; and that users are further aided by the deployment of machine learning techniques to discover contexts and detected changes of context, based on the user’s behaviour. • That the productivity of knowledge work would be improved by providing tools to create, view and edit informal processes; that the use of machine learning to learn processes from users’ behaviour would further support knowledge work; and that machine learning could also be used to suggest information resources, based on process and context information.

1.3

The Structure of This Book

Our book is organised into five parts. The next chapter concludes Part I by looking at the opportunities and challenges faced by organisations as they move towards exploiting Web 2.0 capabilities. A challenge for knowledge management is the

6

P. Warren et al.

integration and exploitation of internal and external intelligence. The chapter describes strategies for exploiting Web 2.0 intelligence. Part II then looks at the technologies, and also some methodologies, developed in ACTIVE. Part III describes how these technologies have been exploited and evaluated in the ACTIVE case studies. Part IV starts with a chapter describing the principal market trends in the areas addressed by our technologies, and then includes a number of chapters describing related work in other projects. Finally, Part V draws some conclusions and indicates some further areas for research. Parts II to V are all briefly reviewed in the remainder of this chapter.

1.3.1

The Technologies

The first chapter of Part II, Chap. 3, is concerned with the development, maintenance and use of knowledge structures within organisations. Such knowledge structures are currently very diverse, ranging from database tables to files in proprietary formats used by scripts. The chapter describes the use of the Semantic MediaWiki (SMW) to provide an environment for enterprise knowledge structures. Chapter 4 continues the theme of enterprise knowledge structures. It presents models to estimate the costs and benefits associated with the development of ontologies and related knowledge structures, and of the applications using them. The chapter provides guidelines to assist project managers in using these models throughout the ontology life cycle. In our next chapter, Chap. 5, we look at another of the key technologies underpinning ACTIVE, that of context. The chapter explains how the concept of context is realised in the ACTIVE Knowledge Workspace (AKWS). It describes the top-down and bottom-up perspectives of context. In the former, the users create context, set their current context, and associate information objects with contexts. In the latter, ACTIVE’s machine intelligence software is used to discover contexts, based on the users’ behaviour; to detect a user’s current context; and to associate information objects with context. In ACTIVE, these two perspectives are merged into a single end-user experience. Chapter 6 looks at the third of our ACTIVE technologies: informal processes. The chapter describes tools to support how these processes can be captured, shared and optimised. It also describes tools to provide the security mechanisms to allow knowledge to be shared safely. The final chapter in Part II, Chap. 7, looks at a fundamental technology which supports ACTIVE’s use of context and process. As already noted, the application of machine learning techniques to support the use of context and process information is one of the project’s principal research challenges. The chapter also includes a discussion of Contextify, an outlook plug-in which uses the technology to support the management of email.

1 Introduction

1.3.2

7

Applying and Evaluating the Technologies

The central premise of the ACTIVE project is that the use of the three approaches described above, based upon lightweight ontologies and folksonomies, contextbased information delivery, and informal processes, will significantly increase the efficiency and effectiveness of knowledge work. In Part III we explain how this has been put to the test. We describe how we have applied these technologies in three case studies, and how in turn we have used these case studies to evaluate our technologies, at the user level as well as the technical level. Chapter 8 describes a case-study with customer-facing people in BT. They confront the three challenges we discussed earlier: the need to share information; to combat information overload; and to mitigate the effect of continual interruptions. The chapter describes how ACTIVE tools, based both on the AKWS and the SMW, are being used to respond to these challenges; a particular application is the creation of customer proposals. A case study in Accenture, a global consultancy with over 200,000 employees, is described in Chap. 9. The chapter focuses on two enterprise problems: enterprise search and collaborative document development. It describes how ACTIVE technology has been used to make generic knowledge management tools context and task sensitive. The confidentiality of documents is often a bar to their being shared, even where non-confidential aspects could be exploited across an organisation. The chapter also describes the use of machine learning technology to automatically redact documents to enable their being shared. The third ACTIVE case study, described in Chap. 10, is with Cadence Design Systems in the electronic design sector. Electronic designers do not follow predefined workflows but use their tacit knowledge to navigate their own informal processes. In this case study, ACTIVE’s machine intelligence technology is used to learn and visualize these informal processes. In this way, bottlenecks can be identified, and processes can be optimized and shared. A project navigation metaphor is used, whereby an electronics designer is helped to find a productive execution path through the state space of an engineering design project. All these case studies have been conducted in large organisations. However, these technologies are also applicable to those working in smaller organisations, or even those working alone. Similarly, the applications described here are accessed via a conventional personal computer, but equally the approaches developed could be used with other devices, including the mobile devices on which an increasing volume of information interaction takes place.

1.3.3

Complementary Activities

Part IV looks beyond the ACTIVE project to see how others are using related approaches to achieve the same or similar goals. The first chapter, Chap. 11, looks

8

P. Warren et al.

particularly at the Web 2.0 marketplace, at what products are available, and at customer needs and perceptions. The chapter looks at some of the challenges being faced by those developing tools to boost knowledge worker productivity and identifies some market trends. Chapter 12 complements Chap. 3 by describing a range of applications of the Semantic MediaWiki. The chapter is divided into two sections. Section 12.1 presents SMW+, a product for developing semantic enterprise applications, and describes applications in content management, project management, and semantic data integration. Section 12.2 presents MoKi, a semantic wiki for modeling enterprise processes and application domains. Example applications of MoKi include modeling tasks and topics for work-integrated learning, collaboratively building an ontology and modeling clinical protocols. The concept of the social semantic desktop is described in Chap. 13, and in particular the work of the NEPOMUK project. Based on semantic web technology, the NEPOMUK Social Semantic Desktop allows access to information across various applications within a knowledge worker’s personal computer. It facilitates the interconnection, management, and ontology-based conceptual annotation of information items. Chapter 14 describes the use of semantic technologies, machine intelligence and heuristics to enable learning support during the execution of work tasks, a paradigm known as work-integrated learning. The work described here, which formed part of the APOSDLE project, includes the automatic detection of a user’s work task, and context-aware recommendation both of relevant content and relevant colleagues. The work described also includes the inference of a user’s competences based on her past activities. The final chapter of this Part, Chap. 15, relates the shifts in the metaphors we use to manage and relate to digital content. The chapter notes, for example, the evolution of email from a communication channel to a rich authoring environment and the increased rate at which knowledge workers are exposed to information through content streams. These changes present challenges to the segmented and application bound information storage on our PCs. An approach is presented which de-emphasizes storage management and focuses on support for user activities, at the same time generalizing the notions of folders and files.

1.3.4

Concluding Words

In our final chapter we review the chief themes of our book, in particular our three technology themes. For each theme we outline some remaining challenges. We also make some predictions about how these technologies will develop and be used. Yet that is as much for you, the readers, to determine as for the authors of this book. Our hope in writing the book is that you will be as excited by the technologies’ possibilities as we are, and help to take them forward.

1 Introduction

1.4

9

Knowledge, Knowledge Work and Knowledge Workers

A final comment about language may be of value. The terms knowledge, information and data will be used in the course of the book. A widely quoted articulation of the difference between the first two of these is due to Ackoff (1989). Ackoff sees information as useful data, providing answers to the ‘who’, ‘what’, ‘where’, and ‘when’ questions. Knowledge, on the other hand, enables the application of information; it answers the ‘how’ questions. This is a useful differentiation. However, our approach is pragmatic and in general we will use the word which seems most natural in the particular circumstances. We have already noted that the term knowledge work was introduced by Drucker. He also introduced the term knowledge worker for someone who spends much of his or her time undertaking knowledge work. It is important not to be elitist about these terms. Knowledge work is not restricted to those with professional training. For us, knowledge workers are those who spend much of their working time interacting with information at a computer or similar device. It is for all such people that our technology is intended. Acknowledgement Much of the work reported in this book has received funding from the European Union’s Seventh Framework Programme (FP7/2007–2013) under grant agreement IST-2007-215040. Further information on ACTIVE is available at http://www.active-project.eu.

References Ackoff RL (1989) From data to wisdom. J Appl Syst Anal 16:3–9 Drucker P (1999) Knowledge-worker productivity: the biggest challenger. Calif Manage Rev 41:79–94 Ermolayev V, Ruiz C, Tilly M, Jentzsch E, Go´mez-Pe´rez J, Matzke W (2010) A context model for knowledge workers. Proceedings of the second workshop on context, information and ontologies, 2010. http://ftp.informatik.rwth-aachen.de/Publications/CEUR-WS/Vol-626/ last accessed 8 Aug 2011 Hill C, Yates R, Jones C, Kogan S (2006) Beyond predictable workflows: enhancing productivity in artful business processes. IBM Syst J 45(4):663–682 Simperl E, Thurlow I, Warren P, Dengler F, Davies J, Grobelnik M, Mladenic D, Go´mez-Pe´rez J, Ruiz Moreno C (2010) Overcoming information overload in the enterprise: the ACTIVE approach. IEEE Internet Comput 14(6):39–46 The Radicati Group (2009) Email Statistics Report, 2009–2013, Palo Alto, CA Warren P, Go´mez-Pe´rez J, Ruiz C, Davies J, Thurlow I, Dolinsek I (2010) Context as a tool for organizing and sharing knowledge Proceedings of the second workshop on context, information and ontologies, 2010. http://ftp.informatik.rwth-aachen.de/Publications/CEUR-WS/Vol626/ last accessed 8 Aug 2011

2

Web 2.0 and Network Intelligence Yasmin Merali and Zinat Bennett

2.1

Introduction

ICTs have been implicated as both the drivers and enablers of the “Information Society/Economy”, “Network Society/Economy”, and concurrently, in the emergence of Knowledge Management as a distinctive management practice. The communication and information capabilities and processes enabled by the Internet and associated technologies are integral to the realisation of the network society and the network economy (Castells 1996). At the most fundamental level the technological developments have the potential to increase: • • • •

Connectivity (of people, applications and devices), Capacity for distributed storage and processing of data, Reach and range of information transmission, and Rate (speed and volume) of information transmission.

The exploitation of these capabilities has given rise to the emergence of network forms of organising as processes, information and expertise are shared across organisational and national boundaries. Increased global connectivity and speed of communication have contracted the spatio-temporal separation of world events: informational changes in one locality can very quickly be transmitted globally, influencing social, political and economic decisions in geographically remote places (Merali 2004). In the managerial discourse (Merali 2004; Evans and Wurster 2000; Axelrod and Cohen 1999; Shapiro and Varian 1999), these changes, seen

Y. Merali (*) Warwick Business School, Warwick University, Coventry CV4 7AL, UK e-mail: [email protected] Z. Bennett 19 Foxes Way, Warwick CV34 6AX, UK e-mail: [email protected] P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5_2, # Springer-Verlag Berlin Heidelberg 2011

11

12

Y. Merali and Z. Bennett

as the harbingers of a “new” economy (or “information economy”), were characterised by • • • •

The critical role of information and knowledge in competition, Increased dynamism, uncertainty and discontinuity in the competitive context, Pressures for fast decision making in the absence of complete information, and The importance of learning and innovation to afford requisite flexibility and adaptability for survival.

Consequently, whilst most of the 1990s were characterised by management engagement with Business Process Reengineering (BPR) and the development of infrastructures and opportunities for e-commerce and e-business, the end of that decade and the 2000’s saw the shift to a concern with knowledge management, innovation and business intelligence. Some of us believed that internet-based ICTs would lead to a qualitative change in management theory and practice: The “network” form of organising is a signature of the Internet enabled transformation of economics and society. We find that strategy and managerial discourse are shifting from focusing solely on the firm as a unit of organisation to networks of firms, from considerations of industry-specific value systems to considerations of networks of value systems, and from the concept of discrete industry structures to the concept of ecologies. In the domain of information systems, the focus on discrete applications development has become imbued with issues of flexibility, connectivity and compatibility with other systems. Driven by the business need for intra- and inter-organisational integration of information processes, we have moved from concentrating on applications development to engaging with issues of information architectures. The Internet is implicated as both an enabler and a driver of this interconnected world. At a more general level, there is an escalation of interest in the idea that information technology networks and social networks self-organise into a constellation of networks of networks (Watts 1999, 2003; Barabasi 2002). This is analogous to conceptualising the interconnected world as a kind of global distributed information system comprising networks of networks. Merali 2004, p. 408

Web 2.0 technologies are a gateway to realising the potential of “global distributed information system” for business and society. However they also pose significant challenges for firms with regard to the development of appropriate enterprise architectures and strategies for dealing with the emergent networked competitive terrain. This chapter provides a perspective on the implications of Web 2.0 developments for enterprise knowledge processes in this context.

2.2

Enterprise Knowledge Processes and the Network Economy

Knowledge Management initiatives in the 1990s were characterised by their focus on developing information infrastructures (Knowledge Management Environments, or KMEs) that would enable cross-boundary processes and collaborative work to be executed efficiently, and their attempts to codify, organise and extract value from information assets. Table 2.1 provides an illustration of the kinds

2 Web 2.0 and Network Intelligence

13

Table 2.1 Capabilities and functionality associated with ICT-based KMEs Capability Functionality Discovery and creation • Search • Filter • Alert • Analysis and Synthesis (content analysis, pattern matching, discovery, “reasoning”) Sharing • Organisation (classification and clustering) • Creation of summaries and abstracts • Display • Dissemination (e.g. profile-based targeting) Utilisation and development • Collaborative work space • Work flow • Communication and interaction support (wikis, blogs, social computing environments, etc.) • Simulation environments • Learning environments

of capabilities afforded by ICTs that were at the heart of most knowledge management strategies in that era. Experience with these ICT-enabled knowledge management environments (KMEs) clearly demonstrated that whilst technology solutions could provide access to information, the value of the information could only be leveraged if it could be applied effectively by those participating in the information-based interactions. Consequently the strategy literature on the Information Economy in the 1990s focused on new business models that were enabled by the Internet with an increased emphasis on customer relationship management, business intelligence and innovation. Much of the corporate development in the 1990s and the early 2000s was concerned with providing integrated platforms and architectures for seamless delivery of service in conventional value chains, or more ambitiously, in value webs that were well-defined in scope and scale. Grid computing was feted for enabling models of provision that could accommodate demand irregularities and spikes in capacity requirements for computing power, but the potential for ubiquitous connectivity offered by the internet and www remained under-realised by most organisations. The mid-to-late 1990s brought us pioneers like Napster and Amazon who used the network capabilities of the web not just for delivering services but for harnessing social intelligence to enhance the value and utility of their provision. Looking at developments over the past 5 years, it is clear that realising the full potential of connectivity in the network economy entails a step change in the scale of business networks and in the richness, speed and reach of communications across these networks. This leads to a more complex competitive terrain as there are a number of different ways that organisations can exploit network effects with different business models. For example, whilst faster diffusion of information and ideas may lead to speedier imitation and short-lived first mover advantages for innovators, it is also possible for smart innovators to exploit network effects to rapidly establish a dominant footprint in the market space, making it difficult for imitators to usurp them.

14

Y. Merali and Z. Bennett

Similarly, whilst the scale of the internet and the extended reach it affords may enable large corporations to occupy dominant positions in the global market, it also enables many more niche players to survive comfortably. The increasing scale and scope of web-based enterprise intelligence is predicated on requisite corporate competences associated with the management and analysis of very large databases and scalable architectures, capable of supporting web-based transactions at any scale. In particular, it has spawned an ecology of business models supporting a diversity of business size and scope. The long tail effect1 (Anderson 2006) is a popularly cited characteristic of the Web 2.0 landscape (see Fig. 2.1). Even if one is catering for only a relatively miniscule niche market, the global reach of the internet makes it possible to attract the critical mass of customers necessary for the viable delivery of a service or product offering (i.e. a small share of a very large market is still large in terms of absolute numbers). Whilst Anderson pointed out the impact of global reach on enabling businesses to survive with small numbers of high-value sales, the web has also spawned a population of business models based on small (low-value) transactions enabled by the evolution of efficient micro-payment systems lowering the transaction costs for small purchases. Thus global reach and socio-economic developments enable many diverse niche providers (ranging from those engaging in high volume, low value transactions, to those engaging in high value, low volume transactions) to co-exist on the competitive landscape.

Fig. 2.1 The long tail (modified from (http://www.longtail.com/about.html last accessed 21/02/12))

1

The long tail refers to the statistical property that a larger share of the population rests within the tail of a probability distribution than observed under a “normal” (symmetric about the mean) or Gaussian distribution.

2 Web 2.0 and Network Intelligence

15

The increase in power and impact of capabilities afforded by successive generations of ICT over the decades has been accompanied by a change in the scope and scale of organisational knowledge processes. Whilst the knowledge management agenda for the 1990s was generally focused on improving knowledge processes within organisational boundaries, organisations today are engaging with exploiting the intelligence of markets and civil society for open innovation and crowd sourcing. Web 2.0 capabilities and the possibilities of exploiting usergenerated content extend the scope of KMEs beyond organisational boundaries, supporting employees engaging in novel interactions with external players in dynamic contexts to make decisions “on the hoof”. The next sections outline the impact of Web 2.0 and some of the challenges that this raises.

2.3

Web 2.0 Capabilities and Knowledge Work

Although Web 2.0 has been in the public lexicon for several years, its definition is a “work in progress”. In terms of the Network Economy we can think of Web 2.0 as the enabler for realising the networkness of networks (Merali 2011). O’Reilly’s (2007) statement provides a good working definition and captures the features of Web 2.0 capabilities and use that are the most significant for the current discussion: Web 2.0 is the network as platform, spanning all connected devices; Web 2.0 applications are those that make the most of the intrinsic advantages of that platform: delivering software as a continually-updated service that gets better the more people use it, consuming and remixing data from multiple sources, including individual users, while providing their own data and services in a form that allows remixing by others, creating network effects through an “architecture of participation”, and going beyond the page metaphor of Web 1.0 to deliver rich user experiences. O’Reilly 2007

Industry observers like Gartner (Valdes et al. 2010) also point to Web ubiquity and utility of web browser combined with • Better performing (bandwidth, speed, price) networks and mobile devices, • Provision of services on the cloud, and • Social computing and access to the social web; as the enablers of the transition from what O’Reilly labels as “going beyond the page metaphor of Web 1.0” to business models for the future. Mobile and pervasive devices and social computing add the quality of dynamic context specificity to the “richness and reach”2 of Internet communications. The

2

In the early 1990s Evans and Wurster’s Blown to Bits underlined the idea that compared to traditional business models for reaching customers, where there had to be a trade-off between the richness and reach of communications (e.g. one-on-one interaction with a salesperson versus a broadcast advertisement in a national paper with a wide circulation) the Internet made it possible to have both richness and reach, as it was possible to have customised communications for different

16

Y. Merali and Z. Bennett

promise of cloud computing is very closely associated with the Web 2.0 vision because it confers two essential capabilities: the possibility of accessing and managing distributed resources (data, applications, computing power), and the flexibility of the utility model (offering platform as a service, infrastructure as a service, software as a service). Whilst there has been an explosion of new businesses spawned by the emergence of Web 2.0 capabilities, it is perhaps not surprising to note that the most cited incumbent organisations making the transition smoothly to “Web 2.0” practices were those who • Integrated access to information from large numbers of different sources to serve dynamic needs (data management competence), and/or • Provided space for social/economic interactions between large numbers of people who were not previously connected. This applies to both pure information businesses (such as Google and Facebook) and those whose services are implicated in the sale or exchange of material objects (such as Amazon and e-bay). They were all orchestrators and hosts of transaction spaces, and used network effects to amass a large following very rapidly. Most did not own the information or material objects involved in the transactions, and they had a variety of business models, but all provided ease of access to network resources combined with an attractive value proposition for non-paying and paying participants (very often advertisers). It is salutary that whilst their rapid establishment of a critical mass in the marketspace made it difficult for new entrants to usurp them immediately, none have ceased to innovate and expand, often acquiring and absorbing innovative start-ups to enhance their portfolio of capabilities. Whilst firms are adopting social media and using social networks, blogs, wikis and tweets to enhance communications and information sharing within the traditional paradigm of knowledge management, there is an important change in the way that firms need to perceive enterprise intelligence in the Web 2.0 era. The challenges for enterprise intelligence in the “pre-Web 2.0 businesses intelligence era” were concerned with managing internal data, understanding its value and leveraging it effectively for competitive positioning, whilst those of the Web 2.0 era are concerned with integration and exploitation of internal and external intelligence for competition and collaboration. The boundary between “business intelligence” and “social intelligence” is no longer a clear one, and this leads to some interesting tensions in emerging business models. Integrating data from large numbers of sources and realising the potential for global reach to harness business and social intelligence poses new challenges for process and data management in dynamic use contexts.

audiences spread across vast geographical areas. Hal Varian’s Information Rules developed the idea of developing value propositions based on the versioning of information for different audiences. These ideas were influential in shaping e-business models, but were largely used in the context of the traditional linear value chain.

2 Web 2.0 and Network Intelligence

17

For process design and implementation, the central challenge is that of developing scalable, agile architectures for secure inter-operability and integration across diverse organisational boundaries, enabling mashups to deliver context-sensitive information in real time. The promise of cloud computing for dealing with issues of scalabilty and demand-based delivery is important in this aspect, and Gartner (Valdes et al. 2010) predict that content driven architectures building on the interaction and partitioning styles pioneered by Service Oriented Architectures and Event Driven Architectures will enter mainstream adoption in the next 5 years. On the software development side, the large scale development and maintenance for much of the software is often characterised by the Open Source ethos of collective development and continuous improvement. Dynamic programming languages, syndication and reuse of software all contribute to the speed and diversity of context-specific assembly that is demanded by users on the hoof. Use-context information may be provided explicitly by devices or sensors (e.g. for spatial location) or it may have to be inferred from user queries or dialogue. This means that application design faces the challenge of having to cater for different media and device characteristics. However the emerging consensus is that the greatest challenges are in the domain of data management. There are conceptual challenges in the organisation and semantic articulation of data originating from diverse and varied sources and destined for use in undefined future contexts. There are technical challenges for real-time contextual matching: e.g. anticipating what data is valuable at any instant in dynamic use-contexts, and folding this in with served applications. The semantic web literature highlights the challenges of organisation and seamless integration of data and metadata, but most interestingly from the perspective of knowledge management are the challenges associated with the incorporation of social intelligence in corporate business models. The traditional user-centred and customer relationship management approaches are compatible with the exploitation of Web 2.0 capabilities to improve the customer experience or to tailor services and products to meet specific customer requirements. Similarly the use of social computing and the deployment of wikis, blogs and tweets may be viewed as enhanced communication capabilities to reinforce the knowledge management practices inherited from the KM heyday of the 1990s. Distinctive in the Web 2.0 vision is the notion of leveraging the collective intelligence of customers and civil society, and the diversity of scale and scope for interactions with potential customers and external sources of intelligence.

2.4

Leveraging Collective Intelligence

The business models of the most cited examples of Web 2.0 success stories are all predicated on leveraging collective intelligence as a resource by doing some or all of the following: • Hosting and orchestrating the emergence of collective intelligence, • Harnessing collective intelligence to

18

Y. Merali and Z. Bennett

– Improve product/service offering, and – Develop product/service offering • Using social media and networks to market product/service offering, and • Using social media, networks and collective intelligence to mobilise collective action. Examples exist for both informational goods and services, and for those involving physical processes and material objects. Wikipedia, the online encyclopaedia is probably the most frequently cited example of a site that hosts and orchestrates the emergence of collective intellectual property – it provides the space where anybody can add to, comment on, or correct existing entries to constantly develop the scope and quality of the stored material. E-bay, Amazon and Netflix are interesting stalwarts from the e-business era that embody Web 2.0 characteristics. E-bay provides a trusted transaction space and facilitates interactions between prospective buyers and sellers, and in doing so it amasses social capital and has access to social networks enhancing its reputational standing. It analyses the usage patterns and bidding behaviours of its users to refine and manage its product categories and their flows. Amazon combines information from suppliers and customer reviews with an analysis of patterns of customer behaviours to provide an enhanced purchasing experience. Its considerable footprint in the book trade enabled it to have a head start in the e-book market along with its Kindle e-book reader. Like Amazon, Netflix (a film loaning business) uses collaborative filtering to make recommendations to users based on what other users like, and, according to the Economist, nearly two-thirds of the film selections by Netflix’s customer come from referrals made by computer (Economist 2010a). Social networking sites like Facebook that host and orchestrate social interactions are attractive to advertisers wanting to tap into the potential of social networks to act as recommendation channels. The key feature of these success stories is that in retrospect they all have a pattern in which they build a large following using their service/product, coupled with a generative business model in which the more a product or service is used, the more valuable it becomes. This phenomenon of positive returns (Arthur 1990) where the adoption of a product generates more demand for it, was associated with network effects in the 1990s. This dynamic was used to explain why VHS overshadowed Betamax in video formatting, or why there was a tipping point effect that established the winners in the diffusion of competing communications technologies. In the case of Web 2.0, in addition to raising the popularity of the offering and generating the non-linear diffusion effects for market penetration of products, use of the product or service generates data and intelligence which is harnessed to enhance the quality of the product or service. Google’s PageRank3, and query

In Google’s terms, PageRank “. . .reflects our view of the importance of web pages by considering more than 500 million variables and 2 billion terms. Pages that we believe are important pages receive a higher PageRank and are more likely to appear at the top of the search 3

2 Web 2.0 and Network Intelligence

19

recognition algorithms and Amazon’s recommendation systems are based on data about user actions and behaviours. Google’s spell checker uses an analysis of usergenerated corrections of mis-spelt queries to hone the appropriateness of its responses and to generate the “Did you mean. . .?” service for its query recognition, whilst its page-ranking algorithm presents the most “valuable” items first, based on its analysis of the way in which different kinds of users access and spend time on the various web-pages. The potential of the web to generate innovative community-based models of production was recognised in the pre-Web 2.0 era. The Open Source community’s model of software development and peer-to-peer content sharing sites like Napster were seen as disruptive innovations, threatening to displace the dominant incumbents in the software and music industry. In the business community there was a great deal of interest in open innovation, with customers and users contributing to the design of products (Chesbrough and Vanhaverbeke 2006). These movements were harbingers of the Web 2.0 era which ramped up the potential scale of involvement from the level of the community to the level of the entire society, and which extended the scope of their involvement by enabling a range of different modes of engagement. Crowd-sourcing4 – getting the users to carry out work or provide content that enhances the value of a product – is a typical model for social engagement. Wikipedia, the online encyclopaedia is often cited as an example of crowd-sourcing, as anybody can contribute to its collective, dynamic, universal repository of knowledge, and entries are open to modification and refinement through an open process. Flikr, in addition to hosting user-contributed images, uses the intellect of its users to structure and organise its massive image store in way that enables image retrieval through multiple and diverse associations – a “folksonomy” emerges as users tag and classify the images using their own keywords. A more commercial exploitation is Twitter’s crowd-sourcing of its language translation tool: users provide translations, giving their time and text for free, whist Twitter owns the rights to the translations and their reuse to provide apps in different languages for different devices, thus increasing its global footprint. The idea of crowd-sourcing has its variants in finance: in contrast to the traditional route of venture capitalists with deep pockets backing start-ups, there is a small but growing number of crowdfinanced business ventures where a number of small investors collectively back a venture in return for equity.

results. . .PageRank also considers the importance of each page that casts a vote, as votes from some pages are considered to have greater value, thus giving the linked page greater value. We have always taken a pragmatic approach to help improve search quality and create useful products, and our technology uses the collective intelligence of the web to determine a page’s importance.” 4 Howe (2006) coined the term “crowd-sourcing” for “the act of taking a job traditionally performed by a designated agent (usually an employee) and outsourcing it to an undefined, generally large group of people in the form of an open call.”

20

Y. Merali and Z. Bennett

The examples above illustrate the way in which Web 2.0 enables • The harnessing of intelligence and cognitive capabilities of non-corporate agents (customers, users or enthusiasts) to do “knowledge work”, and • The collection and leveraging of metadata to improve the business value proposition. However the current excitement about Web 2.0 is very strongly linked with the developments in social media and the exploitation of social networks for a variety of economic and social goods. The focus on intellectual capital of the pre-Web 2.0 era is now combined with a quest to monetise the social and relational capital of networks.

2.5 2.5.1

Social Networks: Leveraging Social and Relational Capital Socially Intelligent Targeting

Social networking sites like Facebook host and facilitate the development of extensive and dense networks of “friends”. The sharing of personal information and experiences between peers, and the degree to which users indulge in selfdisclosure on such sites makes “the network” a repository of social and relational capital. The ease with which users can deploy a diversity of social media to extend and organise their personal networks serves both to accelerate growth of the site’s footprint due to network effects5, and to lock in users who will have ended up with a large chunk of their relational capital invested in that site. The attraction of such sites for advertising lies in the fact that they combine the potential of large networks for amplifying the reach of communications with an inbuilt, socially intelligent targeting mechanism: the network of friends serves to select and promote particular brands or products and services. Compared to Amazon’s recommendation system this has a powerful additional social driver: recommendations from a “friend” with knowledge of a user’s taste, life style and aspirations will be couched in terms that are meaningful within the context of the recipient’s self-concept, and have the assurance of “personally known” trusted sources. The use of viral marketing to exploit network effects was already wellestablished, but the increased potency of social media combined with the capacity of social networking sites to act as “hubs” for targeting marketing messages has led to the emergence of a much more sophisticated and personalised form of social marketing.

5

The power of this effect is illustrated by Facebook’s reported trajectory of growth from 50 M active users in October 2007 to 500 M in July 2010 (http://www.facebook.com/press/info.php? timeline accessed 21/02/11).

2 Web 2.0 and Network Intelligence

21

A recent review in Wired magazine (Rowen and Cheshire 2011) gives examples of ways in which companies are engineering the social use of blogs and tweets to mobilise social selling, with models that incorporate a range of different sociallybased mechanisms. Many of these are based on combining conventional promotional techniques (such as coupons and product placement) with detailed individual disclosures of purchasing choices on social media. There are diverse sources from which to garner intelligence about individual purchasing behaviours and trends, ranging from dedicated websites like Blippy.com (which openly publishes all its members’ credit card transactions along with their product reviews), to spontaneous postings on personal blogs. However, whilst there is significant investment by venture capitalists and media companies in social commerce start-ups, mainstream businesses have yet to develop the competencies and strategies to exploit them (Econsultancy 2010).

2.5.2

Tensions

Business models predicated on monetising collective intelligence or exploiting the social, relational or intellectual capital embodied by social networks are subject to an inherent tension unless the terms of engagement are clearly defined up-front. The tension is connected with three inter-related issues: Intellectual property rights: There is likely to be a resistance (social and/or legal) to the exploitation of common intellectual property and information for private profit. A recent example of this is AOL’s $315 M acquisition of the Huffington Post, a news and content aggregation site: there was sensational media coverage of Huffington Post’s contributors’ fears “that the site’s distinctiveness would be blunted by its new corporate parent” and their sense of betrayal (Economist 2011). A landmark legal case was the class action lawsuit challenging Facebook’s Beacon utility which exposed members’ purchasing history to their contacts: this resulted in Facebook closing down Beacon and agreeing to a settlement fund of $9.5 M. In the case of crowd sourcing, corporates are concerned about the escalation of associated costs: the Economist reports that some firms are realising that crowdsourcing can be more expensive than doing things themselves, with the most significant costs being associated with checking the provenance of contributions and whether or not they infringe copyright. Trust: Pecuniary rewards for reviewing and recommending products and services may undermine trust in the impartiality of the recommenders and diminish the credibility and influence of recommendation. Similarly reported abuse or unauthorised exposure of personal data (as in the case of Facebook and Beacon) is likely to incur a loss of trust and significant reputational damage. Ethics: The use to which user-contributed content is put may give rise to ethical issues. For example in December 2009, Facebook was challenged for changing the default settings on its privacy controls so that individuals’ personal information would be shared with “everyone” rather than selected friends. Google also attracted

22

Y. Merali and Z. Bennett

legal scrutiny when it was found to be capturing Wi-Fi data without permission: bits of sensitive private data from 30 countries were collected and stored for years, without the Street View leaders’ knowledge (Economist 2010b), and in April 2010, ten privacy and data-protection commissioners from countries including Canada, Germany and Britain demanded changes in Google Buzz, the social-networking service, which was dipping into users’ Gmail accounts to find “followers” for them without clearly explaining what it was doing. The examples cited here illustrate the absence of precedent for many of the legal and ethical issues that arise as firms start to exploit Web 2.0 capabilities in powerful ways. Whilst Google and Facebook responded to criticisms by modifying their practice, at the industry level we can interpret these episodes as examples of testing the boundaries, and expect to see more infringements and challenges in the coming years. For firms wanting to develop social media strategies, these types of issues are important to consider as making repairs for transgressions may be costly. Whilst the mainstream focus has been on the deployment of social media by corporates to improve their value propositions and competitive positioning, it is important to note that the division between commerce and civil society is not so clear-cut. Blogs, wikis tweets and social networks can be used to mobilise and co-ordinate civil society to act in ways that have an economic or political impact, e.g. by boycotting goods and services or launching denial of service attacks on corporate websites, or mobilising civil action to bring about constitutional change as evidenced by the events of February 2011 in Egypt. In the third sector, social networks and social media have been used to generate new and sustainable models of social enterprise, as evidenced by the success of peer-to-peer lending organisations like Kiva and Zopa (http://www.kiva.org, http://www.zopa.com, last accessed 21/01/11), who mediate social lending for micro-financing.

2.6

Time and Space Matters

The richness and reach of communications in the internet-enabled world combined with the proliferation of social networking sites, blogs and tweets exposes wellconnected individuals to multiple, possibly simultaneous “feeds” of information on a variety of topics from a diversity of sources. Businesses wanting to use social media for promoting value propositions are therefore confronted with the challenge of getting their potential clients to attend preferentially to their promotional messages.

2.6.1

Context Sensitive Content

One potential solution to the problem of capturing attention lies in exploiting social networks to send targeted messages as discussed in the last section: the extent to

2 Web 2.0 and Network Intelligence

23

which the recipient values the opinion of the sender may serve to prioritise the speed and seriousness with which the message is attended to. However, to do this effectively the advertiser needs to have detailed knowledge not only of who is connected to whom, but also of the nature of the relationships embodied in those connections. Whilst there are companies specialising in mining social network data to extract or infer this type of knowledge, it is far from being a perfected practice. Another, more accessible, approach is to provide contextually-relevant information – at the right time and the right place for the message to be particularly relevant and the product or service to be particularly useful or desirable. The ubiquity of mobile telephones6 makes them the device of choice for delivering context-specific mobile solutions. Smart phones are increasingly equipped with accelerometers (sensing the motion of the telephone), Global Positioning System (GPS) receivers, Internet connectivity and multi-media capabilities, providing the means to collect and disseminate context-specific information in real-time using a mix of sources and modes of communication (e.g. voice, video, text, and graphics) to cater for a diversity of contexts and devices. Gartner (Valdes et al. 2010) suggest that as the mobile sector becomes more fragmented with the appearance of many competing platforms (from Apple, Google, Microsoft, Nokia, Research in Motion and HP/ Palm), developers are turning to cross-platform Web applications that will use HTML5 and mobile-enabled browser engines that support GPS, tilt, proximity and other sensors. Context-aware service delivery opens up the possibility of enhancing the user experience by connecting the cyber-experience with the web of places and things. Combining this access with access to the social web would deliver the benefits of social endorsement complemented by the immediacy of the communication: both in terms of real-time delivery and in terms of relevance to an individual’s current needs at a specific time and place.

2.6.2

Dynamic Data Management

The focus on real-time data about behaviours distinguishes Web 2.0 strategies from those of the earlier e-business era. With regard to enterprise intelligence, current analysis suggests that effective exploitation of Web 2.0 capabilities entails both access to very large volumes of data (about user behaviours, personal networks, spatial orientation and geographic location) and the capacity to mine this data for meaningful patterns. Access to the requisite data is likely to be via a number of different channels, ranging from individual personal blogs and their network of followers to

6

“The 23/04/09 issue of Nature (Kwok 2009) reported that the GSM Association, a mobile communications industry trade group, announced in February that the number of mobile-phone connections worldwide had hit 4 billion and was expected to reach 6 billion by 2013.”

24

Y. Merali and Z. Bennett

commercial information brokers. Promotional efforts are also likely to entail syndication of the focal enterprise’s own content with content from social networks and that from providers of other complementary products and services. Thus an important functionality of the enterprise web will be to syndicate and push content and logic to other sites, and to aggregate in-coming data from other sites, deploying cloud/web platforms, composite applications, and mashup approaches and technologies. Providing seamless delivery of context-aware applications requires agile and scalable enterprise architectures and entails integrating diverse technologies and defining standards for data formats, semantics and application interfaces. The key challenges are associated with getting integrated platforms and architectures at the back end to provide seamless delivery of products and services, eliciting an enhanced user experience at the front end. This demands both competence in real time data analysis and process management (process synchronisation; harmonisation of interaction channels, real-time analysis of evolving interaction patterns, etc.). Gartner (Valdes et al. 2010) identify context brokers, state monitors, sensors, analytic engines and cloud-based transaction processing engines as the requisite relevant technologies, along with standards for defining data formats, metadata schemas, interaction and discovery protocols, programming interfaces, and other formalities to enable context-aware applications to be widely adopted. They also suggest that the pull for context-aware data architectures will come from packagedapplication and software vendors expanding to integrate communication and collaboration capabilities, unified communications vendors and mobile device manufacturers, Web megavendors (e.g. Google), social-networking vendors (e.g. Facebook), and service providers that expand their roles to become providers and processors of context.

2.7

Conclusions

The purpose of this chapter was to illustrate the step change in the scope and scale of the “intelligence” that enterprises needing to exploit Web 2.0 capabilities will have to engage with. In conclusion, it is clear that there are a number of dimensions that strategies for Web 2.0 exploitation should address, and these are summarised below. Strategies for positioning within the competitive landscape need to address both the structure and the dynamics of the network economy: the old paradigm of competition within well-defined industry structures is being displaced by the imperative to survive by competing and collaborating in an ecology populated by a diversity of players. This carries with it opportunities for the exploitation of network effects and the exploitation of long tail distributions to develop new niches, but it also exposes firms to competition on a global playing field. Understanding the structure and dynamics of the ecology is therefore an essential feature of the intelligent enterprise.

2 Web 2.0 and Network Intelligence

25

The provision of enterprise intelligence in this complex networked context is likely to entail integration of data and applications from diverse sources across organisational boundaries, and this carries with it challenges for the development of standards, interfaces and agile, scalable architectures. However even more challenging is the step change in the diversity, volume and granularity of data available for collection, organisation, analysis and exploitation. This is due to both the increased scope and scale of web enabled transactions and diversity of multimedia devices that interact with the web. Whilst organisations like Google are pioneering the development of powerful datamining algorithms, formidable issues of semantic organisation, analysis and manipulation remain. Web 2.0 business models are likely to entail collaborations and partnerships between providers and users of data and services: Google, Facebook and Amazon all have extensive webs of collaboration with technology and content providers as well as with businesses that want to use their services. One of the early defining characteristics of the Web 2.0 era was the proliferation of user-provided content. The rapid co-evolution of social media and social networking sites like Facebook has focused corporate attention on creating business models that leverage social intelligence by harnessing the intellectual, social and relational capital that is embodied in social networks. A number of legal, ethical and philosophical issues have emerged as firms experiment with exploiting usergenerated content and crowd-sourcing. It is strategically important to establish clear governance frameworks for such engagement particularly with regard to intellectual property rights and the management of personal information, as transgressions can incur very significant financial and reputational damage. Finally, the combination of multimedia capabilities, sense and location data, highly granular data about user behaviours, context-aware applications, and large scale data analysis combined with the social, relational and intellectual capital of individuals and collectives presents the opportunity and challenge of defining business models that can really exploit the synergies between cyberspace and place that are inherent in the “web of places and things”.

References Anderson C (2006) The long tail. Hyperion, New York Arthur B (1990) Positive feedbacks in the economy. Sci Am 262(2):80 Axelrod R, Cohen M (1999) Harnessing complexity: organizational implications of a scientific frontier. Free Press, New York Castells M (1996) The rise of the network society. Blackwell, Oxford Chesbrough HW, Vanhaverbeke W (2006) Open innovation. Oxford University Press, Oxford Economist (2010a) Clicking for gold. Economist, 2/27/2010, 394(8671), Special section p9–11 Economist (2010b) Dicing with data. Economist, 5/22/2010, 395(8683), p16 Economist (2011) Content couple. Economist, 2/12/2011, 398(8720), p71 Econsutancy (2010) http://econsultancy.com/uk/reports/social-media-and-online-pr-report Accessed on 21 Feb 2011

26

Y. Merali and Z. Bennett

Evans P, Wurster T (2000) Blown to bits: how the new economics of information transforms strategy. Harvard Business School Press, Cambridge, MA Howe J (2006) The rise of crowdsourcing. Wired 14(6). http://www.wired.com/wired/archive/ 14.06/crowds.html. Accessed on 21 Feb 2011, p1–4 Kwok R (2009) Phoning in data. Nature 458(23):959–961 Merali Y (2004) Complexity and information systems. In: Mingers J, Willcocks L (eds) Social theory and philosophy of information systems. Wiley, Chichester, pp 407–446 Merali, Y (2011) Beyond problem solving: Realising organisational intelligence in dynamic contexts, OR Insight advance online publication 13 July 2011 O’Reilly T (2007) What is web 2.0: design patterns and business models for the next generation of software. MPRA paper no. 4578. http://mpra.ub.uni-muenchen.de/4578/ posted 07. November 2007 04:01. Accessed on 21 Feb 2011 Rowen D, Cheshire T (2011) Commerce gets social. Wired, 84–91 Shapiro C, Varian H (1999) Information rules: a strategic guide to the network economy. Harvard Business School Press, Cambridge, MA Valdes R, Phifer G, Murphy J, Knipp E, Smith DM, Cearley DW (2010) Hype cycle for web and user interaction technologies, 2010. Gartner Research Report Number 00201568. Gartner, Stanford

Part II

ACTIVE Technologies and Methodologies

3

Enterprise Knowledge Structures Basil Ell, Elena Simperl, Stephan W€ olger, Benedikt K€ampgen, Simon Hangl, Denny Vrandecˇic´, and Katharina Siorpaes

3.1

Introduction

One of the major aims of knowledge management has always been to facilitate the sharing and reuse of knowledge. Over the years a long list of technologies and tools pursuing this aim have been proposed, using different types of conceptual structures to capture the knowledge that individuals and groups communicate and exchange. This chapter is concerned with these knowledge structures and their development, maintenance and use within corporate environments. Enterprise knowledge management as we know it today often follows a predominantly community-driven approach to meet its organizational and technical challenges. It builds upon the power of mass collaboration and social software combined with intelligent machine-driven information management technology delivered though formal semantics. The knowledge structures underlying contemporary enterprise knowledge management platforms are diverse, from database tables deployed company-wide to files in proprietary formats used by scripts, from loosely defined folksonomies describing content through tags to highly formalized ontologies through which new enterprise knowledge can be automatically derived. Leveraging such structures requires a knowledge management environment which not only exposes them in an integrated fashion, but also allows knowledge workers to adjust and customize them according to their specific needs. We discuss how the Semantic MediaWiki provides such an environment - not only as an easy-touse, highly versatile communication and collaboration medium, but also as an

B. Ell (*) • E. Simperl • B. K€ampgen • D. Vrandecˇic´ Karlsruhe Institute of Technology, KIT-Campus S€ ud, D-76128 Karlsruhe, Germany e-mail: [email protected]; [email protected]; [email protected]; [email protected] S. W€olger • S. Hangl • K. Siorpaes STI Innsbruck, University of Innsbruck, Technikerstraße 21a, 6020 Innsbruck, Austria e-mail: [email protected]; [email protected]; [email protected] P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5_3, # Springer-Verlag Berlin Heidelberg 2011

29

30

B. Ell et al.

integration and knowledge engineering tool targeting the full range of enterprise knowledge structures currently used. This chapter is split into two parts. In the first part we undertake a comparative analysis of the different types of knowledge structures used by knowledge workers and enterprise IT systems for knowledge sharing and reuse purposes. In the second part we devise a comprehensive approach to develop, manage and use such structures in a collaborative manner. We present an ontology editor bringing together Web 2.0-inspired paradigms and functionality such as Flickr (http:// www.flickr.com) and wikis to support laymen in organizing their knowledge as lightweight ontologies. Integration with related knowledge resources is exemplified through a series of methods by which arbitrary folksonomies, but also highly popular knowledge bases such as Wikipedia (http://www.wikipedia.org/) and Freebase (http://www.freebase.com/) are made accessible in ontological form. To further optimize the usability of knowledge structures – an issue which becomes particularly important in a non-expert-driven knowledge engineering scenario integrating various resources – we design techniques to check for common fallacies and modeling errors, which offer a solid baseline for cleansing the underlying knowledge base. The implementation is based on Semantic MediaWiki (http:// semantic-mediawiki.org/), and has been deployed in the three case studies of the ACTIVE project which are introduced in Chaps. 9–11.

3.2

Enterprise Knowledge Structures and How Are They Used

The question of how to optimally capture and leverage enterprise knowledge has engaged the knowledge management community since its inception. As already discussed in the introductory section of this chapter, the prominence of this topic is reflected in the different types of conceptual structures which we can find behind the scenes of enterprise knowledge management platforms, a diversity which is multiplied by the wide spectrum of methodologies, methods and techniques proposed for their development, maintenance and use. In the present day, enterprise knowledge management essentially follows a community-driven approach, implementing solutions for crowdsourcing and social networking in order to optimize communication and collaboration – within the company and its ecosystem of business partners and end-customers – and knowledge sharing and reuse. In addition, formal semantics provide intelligent information management technology for capturing, accessing, managing and integrating knowledge. The approach is based on ontologies, knowledge structures whose (community-agreed) meaning is expected to be exploitable by machines, in particular via reasoning facilities by which implicit knowledge is derived and inconsistencies are detected. In the following we illustrate how enterprise knowledge structures can be used, and the various trade-offs which are associated with the different types of structures, in terms of three motivating scenarios taken from the case studies.

3 Enterprise Knowledge Structures

3.2.1

31

Knowledge Management at an International Consulting Company

The first scenario is set in a large, knowledge-intensive enterprise – a consulting company – where employees collaborate around the globe on various topics to provide services to clients with best efficiency. Most enterprise knowledge management systems are set up for the ‘prototypical’ user with no specific task in mind. Especially in a large enterprise context, employees need information for various different tasks. For instance, they may want to find information on previous projects, get an overview of a specific technology, or they may be interested in learning about a particular group within the company. These tasks are particularly relevant in the context of proposal development, by which a company creates a description of the products and services it is offering at an estimated cost to a potential customer. Proposal writing follows standardized processes and procedures – giving instructions about the tasks to be undertaken, the information to be gathered, the documents to be created, etc. Equally important are less formalized practices – calling contacts that may have information on similar projects, or searching for similar proposals in the intranet. Often, information about previous projects cannot simply be obtained from a central data repository. This is due to the fact that many documents created within the context of a client project are client-proprietary, and may not be shared within the entire company. There are also many technical challenges related to the decentralized and heterogeneus nature of the enterprise IT landscape, and to the limitations of keyword-based information management technologies. Especially in an enterprise scenario, and in the context of a specific task, it will often be useful to retrieve actual facts rather than the documents that mention them. Such facts refer to entities, for example, to experts, locations, clients, other companies, and relationships among them. Which facts should be retrieved naturally depends on the task at hand: for instance, in the case of proposal development, one might want to find clients for which the company has submitted similar bids. Enterprise knowledge structures are the backbone of such sophisticated information retrieval facilities. They capture enterprise domain knowledge at various levels of expressivity and formality. When choosing the most appropriate among these levels, it is important to weigh the advantages and disadvantages of heavyweight ontology-based approaches, supporting reasoning and full-fledged semantic search, vs. the additional costs associated with the maintenance and usage of the knowledge structure, which should be integrated into the daily workflow and allow user participation at large. Enterprise document repositories support bookmarking and tagging as means to describe the content of documents. The resulting conceptual structures contain knowledge which could prove extremely useful to create rich, formal ontologies to implement more purposeful information retrieval solutions.

32

3.2.2

B. Ell et al.

Knowledge Sharing at a Large Telecom Operator

A similar scenario has been identified at a large telecom operator. Operating in multiple projects is a reality of modern businesses. As part of their daily work knowledge workers interact with various systems, information sources and people. Their work is highly dependent on contextual dimensions as diverse as the customer, the status of the sales opportunity, current project issues, and the suppliers involved. To improve productivity, frequently used information such as contact and customer data and product documentation should be easily available; the knowledge worker should not have to search around for these things as they change from one working context to another. Furthermore, as the user resumes an earlier task, her working context should be restored without problem to the state it was before. There is an abundance of information held within the company’s repositories, much of which may not be easily accessible to technical consultants, solution consultants, and sales specialists. In addition there is a wealth of tacit knowledge which may not be being captured to best effect. The key problem here is that knowledge workers may not be aware of earlier solutions; it is possible that comparable solutions to similar problems are being worked on in isolation rather than in co-operation, or even that a particular problem has already been solved. A better awareness of the solutions to specific business problems and the business domains in which those solutions were applied should enable common patterns of solutions to be identified. To support agile knowledge working, several knowledge management features are required: information such as contacts, relevant (technical) documentation, emails, and customer-specific information must be captured and easy retrieval must be enabled. Moreover, the context of a knowledge worker has to be captured. This involves modeling of general enterprise knowledge as well as appropriate knowledge representation formalisms, suitable from an information-management point of view, but also tangible for knowledge workers.

3.2.3

Process Optimization at a Digital Chip Design Company

The order of the design activities during chip design is hard to determine before process start. Usually a designer or a team decides on the best possible continuation of the activity flow in an ad-hoc manner during the process. Problems can occur in the case of goal changes, requirement changes, environment changes, etc. It is important to collect data about the actual execution and sequences of design activities in several concurrent design project flows. Ideally, this should be supported by a knowledge management application that assists in eliciting the knowledge about how a sequence of design and verification activities is related to a particular type of a designed artifact, the configurations of used design tools, and the capabilities of design teams.

3 Enterprise Knowledge Structures

33

The company uses a modeling framework and an upper-level ontology for representing dynamic engineering design processes and design systems as process environments. The modeling approach is based on the understanding that an engineering design process can be conceived as a process of knowledge transformation which passes through several states. Each state is the state of affairs in which a particular representation of a design artifact or several representations are added after being elaborated by a design activity leading to this state. Evidently, the overall goal of a design process is to reach the (target) state of affairs in which all the representations are elaborated with enough quality for meeting the requirements. The continuation of the process is decided by choosing an activity from the set of admissible alternatives for that state. Engineering design processes are situated in and factually executed by the design system comprising designers, resources, tools, and normative regulations. The ontology used in the chip design company is a core component of all processes. The ontology constantly evolves and its evolution needs to be supported by collaborative ontology engineering tools. The objective is to ensure that the enterprise knowledge structures and the proprietary ontology suite are aligned.

3.2.4

Trade-off Analysis

Enterprise knowledge structures vary with respect to a number of aspects, ranging from expressivity to size, granularity and modeling paradigm followed. These aspects influence not only the utility of (a category of) knowledge structures in a particular scenario, but has also direct consequences on the ways in which a knowledge structure is developed, maintained and used. This section aims to conduct a baseline analysis of the trade-offs implied by these aspects and to introduce methods which can be used to perform such an analysis in a systematic manner. Particular attention is paid to the use cases discussed above. Considering the scenario within the large consulting company, enterprise knowledge structures can be used to allow for the implementation of intelligent knowledge organization and retrieval techniques. Questions related to the most adequate type of knowledge structure, its tangible benefits, and the associated development and maintenance costs are crucial to demonstrate the added value of the technology in this scenario. The maintainability of knowledge structures is, besides reuse, an essential aspect of the second scenario we investigate in the project. Here, the additional problem to be looked into is the extent to which reusability of existing knowledge structures is economically feasible. The chip design scenario leverages ontologies as means to capture domain knowledge and enable communication between designers. Costbenefit-motivated quantitative and qualitative means are expected to optimize the ongoing ontology engineering process (see Chap. 4).

34

B. Ell et al.

Trade-offs are specified along a number of dimensions used in the literature to classify and describe knowledge structures: 1. Formality: (Uschold and Grueninger 1996) distinguish among four levels of formality: – Highly informal: the domain of interest is modeled in a loose form in natural language. – Semi-informal: the meaning of the modeled entities is less ambiguous by the usage of a restricted language. – Semi-formal: the knowledge structure is implemented in a formal language. – Rigorously formal: the meaning of the representation language is defined in detail, with theorems and proofs for soundness or completeness. (McGuiness 2003) defines a ‘semantic spectrum’ specifying a total order between common types of models. This basically divides ontologies or ontologylike structures in informal and formal as follows (Fig. 3.1): – Informal models are ordered in ascending order of their formality degree as controlled vocabularies, glossaries, thesauri and informal taxonomies. In this category we can also include folksonomies, sets of terms which are the result of collaborative tagging processes. – Formal models are ordered in the same manner: starting with formal taxonomies, which precisely define the meaning of the specialization/generalization relationship, more formal models are derived by incrementally adding formal instances, properties/frames, value restrictions, disjointness, formal meronymy, general logical constraints etc. In the first category we usually encounter thesauri such as WordNet (Fellbaum 1998), taxonomies such as the Open Directory (http://www.dmoz.org) and the ACM classification (http://www.acm.org/class/1998/) or various eCommerce standards (Fensel 2001). Most of the available Semantic Web ontologies can be localized at the lower end of the formal continuum (i.e. as formal taxonomies), a category which overlaps with the semi-formal level in the previous categorizations. However, the usage of Semantic Web representation languages does not guarantee a certain degree of formality: while an increasing number of applications are currently deciding to

Fig. 3.1 Semantic spectrum (based on McGuiness [2003])

3 Enterprise Knowledge Structures

35

formalize domain or application-specific knowledge using languages such as RDFS or OWL, the resulting ontologies do not necessarily commit to the formal semantics of these languages. By contrast, Cyc (Lenat 1995) or DOLCE (Gangemi et al. 2002) are definitively representative for the so-called heavyweight ontologies category, which corresponds to the upper end of the continuum. In (Vrandecˇic´ 2009b) we offer a complete formalization of all the above types of knowledge structures, and thus also how OWL2 (Grau et al. 2008) can be used to represent each of the other types besides ontologies. This allows us to classify knowledge structures automatically, and to check if they indeed meet the criteria of a specific type of knowledge structure. What is important here is that we can use any of the given structures without restrictions and nevertheless guarantee the integration of all these knowledge structures. 2. Shareability: due to the difficulties encountered in achieving a consensual conceptualization of a domain of interest, most of the ontologies available today reflect the view of a restricted group of people or of single organizations. Standard classifications such as the Open Directory (http://www.dmoz.org), classifications of job descriptors, products, services or industry sectors have been developed by renowned organizations in the corresponding fields. Due to this fact, these knowledge structures are being expected to be shared across a wide range of applications. However, many of them have been developed in isolated settings without an explicit focus on being shared across communities or software platforms. Given this state of the art we distinguish among four levels of (expected) shareability: – Personal ontologies: the result of an individual development effort, reflecting the view of the author(s) upon the modeled domain. Personal Semantic Web ontologies are published online and might be accessed by interested parties, but their impact is limited, as there is no explicit support for them being reused in other application contexts. Depending on the complexity of the ontology, they still might achieve a broad acceptance among a large user community. – Application ontologies: developed in the context of a specific project for predefined purposes and are assumed to reflect the view of the project team (including the community of users) upon the modeled domain. Whilst under circumstances made public on the Web, they are de facto intended to be used within the original, project-related user community. Their acceptance beyond these boundaries depends on the impact of the authoring authority in the specific area, but also on the general reusability of the ontologies. Many of the domain ontologies available so far can be included in this category. – Openly developed ontologies: developed by a large, open community of users, who are free to contribute to the content of the ontology. The ontology, as a result of continuous refinements and extensions, emerges to a commonly agreed, widely accepted representation of the domain of interest. The evolution of the Open Directory classification is a good example for collaborative, Web-based ontology development: the core structure of the topic classification, originally proposed by Yahoo! (http://dir.yahoo.com/) and used in slightly modified form

36

B. Ell et al.

by various search engines, was extended by users, who also played an crucial role in the instantiation of the ontology with Web documents. Another prominent example is the Gene Ontology (Gene Ontology Consortium 2000). – Standard ontologies: developed for standardization purposes by key organizations in the field, usually being the result of an extended agreement process in order to satisfy a broad range of requirements arisen from various user communities. The majority of standard ontology-like structures currently available are situated in the area of eCommerce: The United Nations Standard Products and Services Codes UNSPSC (http://www.unspsc.org), the RosettaNet classification (http://www. rosettanet.org) or the North American Industry Classification System NAICS (http://www.census.gov/epcd/www/naics.html). Another example is the FOAF ontology (http://xmlns.com/foaf/0.1/). The simple ontology describing common inter-human relationships enjoys significant visibility, not only as a result of the standardization efforts of the FOAF development team. 3. Domain and scope: according to (Guarino 1998) ontologies can be classified into four categories: – Upper-level/top-level ontologies: they describe general-purpose concepts and their properties. Examples are the Top-Elements Classification by Sowa (Sowa 1995), the Suggested Upper Level Merged Ontology SUMO (Pease et al. 2002) or the Descriptive Ontology for Linguistic and Cognitive Engineering DOLCE (Gangemi et al. 2002). – Domain ontologies: they are used to model specific domains in medicine or academia. A typical example in this area is the Gene Ontology developed by the Gene Ontology Consortium (2000). – Task ontologies: they describe general or domain-specific activities. – Application ontologies: they are extensions of domain ontologies having regard to particular application-related task ontologies and application requirements. A last category of ontologies, which was not covered by the classifications mentioned so far, are the so-called meta-ontologies or (knowledge) representation ontologies. They describe the primitives which are used to formalize knowledge in conformity with a specific representation paradigm. Well-known in this category are the Frame Ontology (Gruber 1993) or the representation ontologies of the W3C Semantic Web languages RDFS and OWL (http://www.w3.org/2000/01/ rdf-schema, http://www.w3.org/2002/07/owl). When describing the scope of an ontology, the types of knowledge that should be available to the engineering team to build the domain conceptualization are highly relevant. In principle, one can distinguish between ontologies capturing common and expert knowledge, and based on this distinction determine the composition of the team engineering a particular ontology. 4. Representation language: a wide range of knowledge structures emerged in a pre-Semantic Web era. In order to overcome this syntactic and semantic barrier a plethora of approaches investigate the compatibility between different formalisms, while the aforementioned representation ontologies are intended to capture

3 Enterprise Knowledge Structures

37

these differences explicitly. The most popular representation paradigms regarding ontologies are Frames, Description Logics and UML-MOF.1 On the Semantic Web, the classic trade-offs regarding expressivity have been decidability and complexity. For a language to be decidable, a reasoner can be implemented such that all questions that can be asked against a knowledge base that are expressed using that language have an answer. Decidability as a property of languages is highly desirable: it guarantees that all questions that can be asked can be answered, and that the associated reasoning algorithms are effectively implementable. Research in Description Logics explores the borders of decidability. Besides decidability, which guarantees the effective implementation of reasoning algorithms, we further need to regard the complexity of the algorithms that can answer questions against the knowledge structures. In general it can be said that the more expressive a language is, the higher the complexity. Since neither expressivity nor complexity are continuous spectra, it can happen that we can increase expressivity but retain the same complexity. In the context of the scenarios introduced earlier, OWL DL fulfills the requirement with regards to decidability, but both decidable OWL languages (OWL DL and OWL Lite) have an exponential (or worse) complexity (Horrocks and PatelSchneider 2004), which makes it possibly unsuitable for our use cases – since we have to expect to deal with a high number of instances. Languages that allow the use of algorithms that can be implemented with a tractable complexity are considered more suitable in cases where we can expect such a high number of instances as in enterprise settings. OWL2 introduces language profiles (Motik et al. 2008), which are well-defined subsets of the OWL2 constructs. These profiles have specific properties that are also guaranteed for all models adhering to these profiles. Other aspects not mentioned in this classification, but relevant when describing an ontology, or every other knowledge structure, are covered by so-called metaontologies and metadata schemes thereof. Metadata schemes such as OMV (Hartmann et al. 2005) cover general information about ontologies, such as the size in terms of specific types of ontological primitives, the domain described, the usage scenarios, the support software and techniques, and so on. Many of these aspects are interrelated and can be traded against each other, as it will be elaborated later in this section. Potential developers and users of ontologies should be made aware of the trade-offs associated to engineering and using a particular type of knowledge structure. More precisely, these tasks require specific expertise, software and infrastructure, as well as the compliance with processes and methodologies, all under circumstances related to considerable costs. These trade-offs are summarized in Table 3.1. The considerations presented in Table 3.1 can be used as general guidelines to be taken into account and applied in the process of engineering an ontology. Their operationalization has to rely on methods which allow a quantification of costs and

1

http://www.omg.org/technology/documents/modeling_spec_catalog.htm

38

B. Ell et al.

Table 3.1 General trade-offs Formality A formal ontology is useful in areas which require sophisticated processing of background knowledge and automatic inferencing. This assumes the availability of mature tooling for these tasks. In addition, the more formal an ontology should be the higher the level of expertise and the costs of the ontology development processes. Finally, heavyweight ontologies can not be acquired automatically, as properties and axioms can not be feasibly learned from unstructured knowledge structures using the present software. Shareability The main advantage of a shared ontology is its capability to enable interoperability at the data and interoperability levels. Developing a commonly agreed ontology implies, however, additional overhead in terms of the development process to be followed, including methodological support and software to support the discussions and consensus reaching task. In addition, a shared ontology will not be able to optimally match very specific needs of many usage scenarios in which it is involved. Thus additional overhead to understand and adapt is required. Domain and scope First there is the aforementioned trade-off between the scope and the reusability of particular categories of ontologies. In addition, higher-level ontologies tend to be more costly, as they require specific expertise. The same applies for ontologies dealing with expert knowledge, such as those in areas of chip design. The size of a knowledge artifact (expressed, let’s say, in the number of concepts, properties, axioms and fixed instances) is an important factor to be aware of, not only because of the direct relationship to the development and maintenance costs, but also because of the difficulties associated with the processing of large artifacts by reasoners and alike. There is a trade-off between the domain coverage of an ontology and the additional effort required to build, revise and use it. Representation Besides to the link to the formality dimension, the choice of a representation language language has consequences with respect to the ways an ontology can be used in knowledge inferencing tasks and the extent to which particular aspects of the knowledge domain can or can not be captured by the ontology. In addition, formal, logics-based representation languages require specific expertise within the ontology development and maintenance team.

benefits involved and their analysis (see Chapter ‘Using Cost-Benefit Information in Ontology Engineering Projects’).

3.3

How are Enterprise Knowledge Structures Being Built

In this section, we first give a short overview of the wiki technology Semantic MediaWiki (SMW) (Kr€ otzsch et al. 2007) as a flexible tool for dealing with enterprise knowledge structures. Then we describe in more detail selected aspects of knowledge structure editing, leveraging, and repair. Social software as a tool for knowledge sharing and collaboration is gaining more and more relevance in the enterprise world (Drakos et al. 2009). This is especially true for so-called enterprise wikis, that, just as wikis in the public Web,

3 Enterprise Knowledge Structures

39

provide their advantages of low usage-barriers and direct benefits within a company intranet. However, the simple provision of a Wikipedia-like internal page does not guarantee acceptance by employees; such wiki software needs to be customized to the specificities of the corporate context. SMW provides this customization by combining the complementary technologies of Web 2.0 and the Semantic Web (Ankolekar et al. 2007). It enhances the popular open-source wiki software MediaWiki (http://www.mediawiki.org/ wiki/MediaWiki) with semantic capabilities. In addition its functionality can be enriched with general-purpose extensions developed by the community2 as well as custom extensions tailored to the needs of specific enterprise scenarios. The usage of the Semantic Web standards RDF, RDFS and OWL, and of ontologies enables the realization of comprehensive knowledge-management solutions, which provide integrated means to formally describe the meaning and organization of the content and to retrieve, present and navigate information. In the following, we describe how enterprise knowledge structures are collaboratively built, enriched, and exploited using SMW. Creating Structured Information Information stored in SMW can be converted into machine-readable RDF. In other words, it is possible to have property-value pairs explicitly assigned to wiki pages. Such a property-value pair can indicate a named link (a so-called object property) to another page, e.g., ‘locatedInCountry’, or a typed attribute (a so-called datatype property), e.g., String ‘hasTag’, Date ‘hasFoundingDate’, and Number ‘hasHeight’. Such properties can be freely inserted into a page via wiki syntax or forms. Enterprise knowledge structures can be defined through categories (so-called classes) of pages with certain properties and encoded as an ontology in RDFS and OWL. The resulting ontology can be automatically or manually applied to the wiki (Vrandecˇic´ and Kr€otzsch 2006), for instance, in the form of categories, pages, wiki templates, forms and properties. Retrieving Information The availability of machine-processable information facilitates the realization of concept-based search, presentation and navigation features going beyond traditional keyword-based approaches. The user can issue structured queries, addressing certain properties of a page, e.g., the customer of a proposal. All pages belonging to a category having certain properties can be listed as an overview, including links to those pages, e.g., all products within a specific price range. Various result formats can be used, starting from simple tables to more advanced calendars, time lines, and maps. Through facetted search one can incrementally filter lists of pages via keywords and property-ranges. More complex, but still user-friendly, querying following similar patterns as the standard Semantic Web querying language SPARQL (http://www.w3.org/TR/rdf-sparql-query/) is supported as well. When the user enters a keyword, the system looks for connections between pages described with the keywords and lists those pages

2 Openly available at http://www.mediawiki.org/wiki/Extension_Matrix (MediaWiki) and http:// semantic-mediawiki.org/wiki/Help:Extensions (SMW)

40

B. Ell et al.

(Haase et al. 2009) In SMW, these queries are possible through forms on special pages, but can also be embedded as so-called inline queries in single pages. Integrating External Information External sources can be integrated and their content merged with existing enterprise knowledge structures. The results can be organized as new pages or properties, referenced from other pages, and visualized in new ways. Enterprise knowledge is rarely represented in RDF, but there are many tools available that deal with such transformations from established formats and standards, most notably tabular ones. The same applies to online knowledge sources such as Freebase (http://www.freebase.com), other SMW installations or the Linked Open Data cloud, for which a growing number of Web services delivering RDF are available (http://www.linkedopenservices.org). Orthogonal to the translation to RDF is the question of how to map specific elements of the source knowledge structure into the wiki model. Simply creating a page for each element within an external source and copying the data into the wiki may prove suboptimal for subsequent data usage. In Sect. 3.3.2 we provide additional details on SMW’s integration features. Improving Information Quality SMW specifically targets scenarios where knowledge is created in a decentralized manner – be that by exposing and integrating external sources, or by supporting collaborative editing and interaction. In such scenarios information quality can quickly become a problem. A prominent dimension we discuss here is consistency, both with respect to the primary sources and with respect to the domain at hand. For the former, SMW adheres to a regime in which users may only refer to, and comment upon the primary sources from within the wiki, while changes may only be undertaken at the level of these sources. For the latter, one can use an inference service operating on the wiki knowledge base. Deduction methods on the enterprise knowledge structures can provide insights about the wrong usage of categories, pages, and properties (Vrandecˇic´ 2009a). Most such errors cannot be automatically repaired, but at least, made visible to the users or administrators. For example, if the imported data contains information about a proposal with customer X and a wiki page exists about X, which is not a member of the customer category, adding that page to the category can be automatically suggested to the administrator. In addition, visualizing information in a structured way may lead to the identification of missing and incorrect information, which applies to both genuine wiki content and content from external sources. Users may not directly correct the latter, but they can rate it, and comment on it for revision. In Sect. 3.3.2 we will discuss a number of simple measurements whose results can indicate specific quality issues. Interplay with other Enterprise Tools To maximize its added value for knowledge workers, SMW should not be used in isolation from existing enterprise systems and workflows. This is enabled by the information integration functionality presented earlier, and by a number of additional features targeting application integration. The content of a semantic wiki can be exported as RDF, as well as many other structured data formats, e.g., JSON, vCard, and BibTeX. Results of queries can be monitored for new pages and modified properties, and published as

3 Enterprise Knowledge Structures

41

RSS feeds and send per e-mail. Using HTTP requests to the wiki, external applications such as office productivity tools can access, add, and modify pages and properties. In the following sections we go into more details of how enterprise knowledge structures can be edited, leveraged, and repaired.

3.3.1

Building Knowledge Structures Manually

The SMW OntologyEditor is an extension of Semantic MediaWiki for developing and maintaining knowledge structures (so-called vocabularies). As such it inherits many of the features and the mode of operation of Semantic MediaWiki. It targets Semantic MediaWiki users, but it also provides a comfortable interface for people less experienced in using wikis, in particular the wiki syntax. In this section we will briefly introduce the functionality of this extension – a more detailed account is given in (Simperl et al. 2010). Main Page The main page is the entry point of the SMW OntologyEditor (see Fig. 3.2). It contains the primary navigation structure and links to important pieces of functionality, including the creation of new vocabularies consisting of categories and properties, the integration of other knowledge structures, such as folksonomies and external vocabularies encoded in RDFS and OWL, and knowledge repair (see Sect. 3.3.2). In addition, the user is provided with a short introduction to the tool, important links, as well as an overview of the content of the current wiki installation, in terms of namespaces of the individual vocabularies and a tag cloud. Vocabulary Creation To create a new vocabulary one can use the corresponding link in the primary navigation menu, which leads to a form (see Fig. 3.3). There the user can enter a vocabulary name and a description and add categories and properties. Once the vocabulary is created the user is presented with a vocabulary overview, which contains automatically added metadata such as Flickr images in addition to the information manually provided by the user and a link to the Create Category Form (see Fig. 3.4). The Create Category Form includes a short explanation and a number of input fields. They are autocompletion-enabled, by which the user is presented with a list of entities with a similar name to the one she is about to type-in (see Fig. 3.4). The user can enter a name for the category, refer to an existing vocabulary, define suband super-categories, and add new and existing properties to the category. Subsequently the system displays the category overview page illustrated in Fig. 3.5, including a tag cloud to easily access category instances (so-called entities) as well as the most interesting images on Flickr related to the category. Categories and entities are visualized in a tree-like hierarchy, which can be altered by clicking on the Edit links which open pop-ups for inline editing (see Fig. 3.6). Knowledge Repair The knowledge repair algorithms can be accessed as socalled SpecialPages in the wiki.

42

B. Ell et al.

Fig. 3.2 Main page

After clicking on Category Statistics the system provides the user with a comprehensive overview of all categories available in the system, and potential modeling issues (see Fig. 3.11). At the top there is a table with explanations followed by a table with minimum, maximum and average values serving as basis for error detection. An additional table displays the corresponding values for all categories. Colors and symbols are used to direct the user focus to potential problems. If the user is not interested in all categories, but rather in a specific one she can click on the tab repair on the category page which will lead to an overview page of the specific category displaying similar information (see Fig. 3.10). The SpecialPage Categories in cycles, shown in Fig. 3.9 lists cycles in a category hierarchy. The user then has to decide whether the specific cycle will be accepted or not. Redundancies in the hierarchy are displayed in the SpecialPage Categories with redundant subcategory relations (see Fig. 3.9). The user can decide which link is indeed redundant and delete it on-the-fly. The SpecialPage Entities with similar names provides the user with information about entities with similar names (Fig. 3.9). For each entity the system calculates the Levenshtein distance (Leveshtein 1966) to other categories and displays the results. In Sect. 3.3.2

3 Enterprise Knowledge Structures

Fig. 3.3 Create vocabulary form and overview page

Fig. 3.4 Create category form

43

44

B. Ell et al.

Fig. 3.5 Category overview

Fig. 3.6 Changing parameters via inline editing

we introduce additional knowledge repair features, such as the Category Histogram, the Property Histogram, Categories with similar property sets and Unsubcategorized categories. Versioning The versioning SpecialPage gives an overview of the history of changes of vocabularies and categories. When a vocabulary or category is selected, a pop-up with detailed versioning information is displayed. On the left-hand side the user can choose between Vocabulary Structure Changes and Category Changes. Different versions are displayed (via AJAX) on the right-hand side of the pop-up. A selected version can be restored by clicking the Restore Selected Version button, as depicted in Fig. 3.7. Import and export One of the advantages of Semantic MediaWiki as a knowledge management platform is its ability to provide integrated access to a multitude of knowledge structures, most prominently folksonomies and ontologies. The folkosonomy import relies on the technique described in Sect. 3.3.2 thus the

3 Enterprise Knowledge Structures

45

Fig. 3.7 Versioning

associated information – a collection of tagged resources such as bookmarks or conventional documents – has to be organized in a specific XML format. Given this, the folksonomy is enriched with additional structuring information and is transformed in a lightweight ontology which can be explored and further revised in the editor just as any other vocabulary. When importing an existing OWL ontology – for instance, one that was developed in a different ontology engineering environment – the system uploads the OWL file specified by the users, extracts all ontological entities and creates corresponding wiki content following the instructions defined in a so-called meta-model. This meta-model describes the types of ontological primitives supported by the editor – in this case, as we are dealing with lightweight knowledge structures, a subset of OWL consisting of classes, instances and properties, in particular specialization-generalization – and how they are mapped to SMW artifacts. Once this step is concluded, the resulting vocabulary can be further processed in a collaborative fashion in our tool. Every vocabulary can be locally stored as an OWL file using the export tab on the vocabulary overview page.

3.3.2

Leveraging External Knowledge Sources

Enterprise knowledge structures come in various forms, from database tables, standardized taxonomies and loosely defined folksonomies to strictly organized knowledge bases. To optimally support knowledge management tasks in a corporate environment Semantic MediaWiki needs to provide mechanisms to access,

46

B. Ell et al.

integrate and use all these different formats. This is important for its acceptance as a knowledge management solution – as it builds upon established resources and platforms – and for its efficient use – as reusing existing resources can reduce costs and improve the quality of the resulting enterprise knowledge structures. In the previous section we have explained how such knowledge structures can be manually created and maintained. The techniques introduced in the following are complementary to this functionality. The first one adds a critical mass of formal semantics to folksonomies in order to overcome some of their typical limitations, such as the usage of abbreviations and alternative spelling, synonyms and different natural languages to tag the same resource. The resulting lightweight ontology can be explored, further developed and used in Semantic MediaWiki. In contrast, the focus of the second technique is on leveraging existing knowledge bases, which might contain significant amounts of (instance) data which could be useful within SMW. The implementation is based on Freebase as one of most visible collections of structured knowledge created in recent years; however, the mediator-based approach underlying the implementation can be equally applied to other knowledge bases.

3.3.2.1

Turning Folksonomies into Ontologies

This section gives an overview of our approach to extract lightweight ontologies from folksonomies. The approach consists of 12 steps that have to be carried out in the given order (see Table 3.2). Step 1: Filter Irrelevant Tags In the first step, we eliminate tags, which do not improve the information content, but have a downgrading effect on the quality of the data basis. Unusual tags, which do not start with a letter are therefore filtered out. Additionally, uncommon tags are dismissed. In this context a certain tag is uncommon, if it is used less than a predefined threshold. Step 2: Group Tags Using Levenshtein Metric The process of annotating a certain resource with tags is an uncontrolled operation, which means that no spell-checking or any other input verification can be assumed to take place. As a consequence typing errors, mixing of plural and singular forms, annotations in different languages and other possible minor discrepancies between tags are likely to occur. The Levenshtein similarity metric (Leveshtein 1966) is used to discover morphologically similar tags. Step 3: Enrich Tags with Wordnet Wordnet is a rich resource of lexical information (Fellbaum 1998). The database is organized in so-called synsets and can be accessed locally or remotely over a simple user interface. If a certain tag can be found in Wordnet, one can expect the tag to be a valid English term. All tags which are covered by Wordnet are assigned a flag containing the exact number of occurrences in Wordnet synsets. Step 4: Enrich Tags with Wikipedia Wikipedia is a large, high-quality, and upto-date online encyclopedia. If a certain tag can be mapped to a Wikipedia article, this tag can be considered a correct natural language term. In addition, we can

3 Enterprise Knowledge Structures

47

Table 3.2 The 12 steps of our method Step Title Description 1 Filter irrelevant tags Consider only tag data that is shared between a sufficiently high number of users to increase the community representativeness of the prospected ontology. 2 Group tags using Levenshtein Compare relevant tags using the Levenshtein similarity metric metric and group the highly similar ones. Tags within the same group are considered to have equivalent meaning and differences are assumed to be the result of spelling mistakes. 3 Enrich tags with Wordnet Check whether a tag is covered by the Wordnet information thesaurus, which we consider a feasible indicator for a valid English term. 4 Enrich tags with Wikipedia Use information available on Wikipedia to enrich the information tags. 5 Spell-check and translate Perform English spell-checking and translate those tags that were neither found in Wordnet, nor in Wikipedia from foreign languages. 6 Update group assignments Update the tag groups created in step 2 based on the additional information gathered in steps 3–5. 7 Find representative for each Select representative for each tag group based on its group quality. 8 Create co-occurrence matrix Create symmetric square matrix containing information on the frequency with which two tags (or tag groups, respectively) were used to annotate the same resource. 9 Calculate similarities Apply vector-based algorithm (Pearson correlation coefficient) in order to detect similarities between vectors in the co-occurrence matrix. 10 Enrich co-occurrence matrix with Augment co-occurrence matrix with the information co-actoring information about the frequency with which two tags (or tag groups, respectively) were used by the same author. 11 Create clusters Create clusters of tags (or tag groups, respectively) on the basis of the calculated correlation coefficients and co-actoring information. 12 Create ontologies Transform the tag clusters created in step 11 into SKOS ontologies exploiting all information gathered in the previous steps.

benefit from the redirect pages functionality implemented in Wikipedia, so that even when a tag is incorrectly spelled or abbreviated, there is a high chance to find the correct corresponding Wikipedia article. Step 5: Spell-check and Translate Spell checking and translating single words (not sentences or pieces of text) can be done automatically at a high precision. We apply this additional step because after the Levenshtein similarity check and the exploitation of Wikipedia redirects, not all tags can be related to these resources. This might occur when a tag is misspelled, or a tag is not in English.

48

B. Ell et al.

Step 6: Update Group Assignments In this step we update the tag groups defined in step 2 based on the information collected in steps 3–5 and eventually decide which tags are relevant for the ontology to be created. The step can be further divided into 3 activities: (1) the re-grouping based on spell-checking and translation results; (2) the re-grouping based on Wikipedia results; and (3) the selection of relevant tags. Re-grouping based on spell-checking and translation results The first group update is triggered by the mapping defined according to spell-checking and translation results. In order to ensure consistent groups after this update, four different scenarios for mappings of the type tagA – > tagB have to be considered: 1. Neither tagA nor tagB are assigned to a group: in this case tagA and tabB, plus all other tags mapped to any of them, form a new group. 2. tagA is assigned to a group, but tagB is not: in this case tagB, and all other tags mapped to it, are included into the group of tagA. 3. tagB is assigned to a group, but tagA is not: just as in the previous case, tagA, and all other tags mapped to it, are included into the group of tagB. 4. Both tags are already assigned to the same or different groups: in addition to the group updates, those tags, which are already assigned to one of the corresponding groups, have to be considered as well. Existing group members of tagA will be assigned to the group of tagB. Re-grouping based on Wikipedia results The second group update is performed if two tags are assigned to the same Wikipedia article. Just as in the previous update step based on spell-checking and translation results, we consider existing groups and its members, which means that also other group members may be affected by this update operation. The selection of relevant tags We assume that all tags, or groups of tags, containing either a Wikipedia or a Wordnet reference, are relevant for the generation of ontologies. The relevancy of the remaining tags and groups thereof is based on their frequency of occurrence in the folksonomy, i.e., on their usage. If this frequency is below a certain threshold, the tag or the tag group will not be considered. All affected tags will, therefore, be marked with a corresponding flag, indicating that the tag is not relevant for future steps towards the generation of ontologies. If the frequency of usage is above the given threshold, the tag, or tag group, will be considered to describe a new term created by the tagging community. Step 7: Find Representative for Each Group This step is about finding the most representative tag in a tag group. This decision is taken as follows: the tag groups defined in the previous steps can contain many single tags. By definition all tags in a group are equivalent to each other, regardless of whether they are misspelled, occur with a certain lower or higher frequency, or are translations from other natural languages. For the generation of ontologies, however, we need to identify which of these tags is the most representative for the meaning of the corresponding tag group. Preference is given to tags occurring in Wordnet and Wikipedia references, in this order. If neither is the case, the decision is based on the highest frequency of usage. Step 8: Create Co-occurrence Matrix Co-occurrence matrices provide the means to derive some kind of semantic relation between two entities. Amongst many

3 Enterprise Knowledge Structures

49

others, this approach was chosen by (Begelman et al. 2006; Cattuto et al. 2007a, b; Simpson 2008; Specia and Motta 2007) to analyze connections between tag entities. The symmetric n  n co-occurrence matrix M contains information about how frequently two tag entities are used to annotate the same resource. The value mij, representing the intersection of (entityi, entityj) for 1  i, j  n, corresponds to the frequency with which the two tag-entities entityi and entityj were used to annotate the same resource. The diagonal elements mij, where i ¼ j, of the matrix M contain information on how often the tag-entity entityi was used at all. This serves as a starting point for steps 9–11. Step 9: Calculate Similarities The co-occurrence matrix is a starting point to derive relations between tag entities. From a simplistic point of view, the relation between co-occurrence values and the total frequency of tag entries (as proposed by (Begelman et al. 2006)) can be seen as a good indicator for the relation of two tag entities. This approach, however, has one important disadvantage: it does not take into account similarities of the two tags to other tags or tag groups. A vector-based similarity measurement, as proposed in (Specia and Motta 2007), resolves this issue. A vector represents a row (or column) of the co-occurrence matrix. The similarity measure is based in our case on the Pearson correlation coefficient. Algorithm 1 below shows how the Pearson correlation coefficient is calculated for two variables X and Y, the means X and Y and standard deviations Sx and Sy, respectively. Algorithm 1 Pearson Correlation Coefficient n P



i¼1

  ðYi  YÞ  ðXi  XÞ ðn  1Þ  Sx  Sy

A positive coefficient value is evidence for a general tendency that large values of X are related to large values of Y and that small values of X are related to small values of Y. A correlation above 0.5 is an indicator that the two vectors are strongly correlated. Step 10: Enrich the Co-occurrence Matrix with Co-actoring Information The outcomes of step 9 do not allow us to derive relations between tags. This holds in particular for tags that are used frequently, but only by a limited number of users. Usually the insertion of tags by spam robots is causing this phenomenon. Even though there are many related tags with correlation values below 0.5, the threshold can not be lowered any further without taking the risk to derive faulty relations as well. To cope with this issue we enrich with so-called “co-actoring information”. This key-figure can be calculated in a manner similar to the co-occurence information, the only difference being the fact that the focus lies rather on the users instead of tags. As such, the co-actoring information for two tags is defined as the total number of users who used both tags. Step 11: Create Clusters In this step, we aim at creating sets of strongly related tags that we refer to as “clusters”. To do so we calculate the relation of a tag entity to the total number of usage and the co-occurrence/co-actoring information and raise the correlation coefficient if the relation proportions are high enough.

50

B. Ell et al.

Algorithm 2 shows the exact formula, where ccoff denotes the correlation coefficient of two tag entities, #(tag1) and #(tag2), denote the total usage of a certain tag, coac(tag1,tag2) stands for the co-actoring information of the tag tag1 and tag2 and cooc(tag1,tag2) represents the co-occurrence value of the two tags. Algorithm 2 Correlation Coefficient Strengthener r ¼ ccoeff 



   coocðtag1;tag2Þ  #ðtag1Þþ#ðtag2Þcoocðtag1;tag2Þ  100

coacðtag1;tag2Þ #ðtag1Þþ#ðtag2Þcoacðtag1;tag2Þ

The algorithm minimizes the problem of spam entries and related tags with lower correlation coefficients dramatically. Tag pairs with either a basis correlation above the defined threshold th1 or with a strengthened correlation coefficient to reach the threshold are then automatically considered to be related and form the basis for a cluster. Tags are merged into one cluster only if the calculated correlations between tag entities, which are indirectly connected by the transitive law, are above another threshold th2. This means, only if cooc(tag1,tag2)  th1, cooc(tag2,tag3)  th1 and cooc(tag1,tag3)  th2, the three tag entities belong to the same cluster. Additional tag entities are added to a cluster only if all correlation values, with respect to the other tags in the cluster, exceed the defined threshold th2. While useful, applying this strategy results in a relatively high number of very similar clustering differing only in one or two elements. To solve this issue we apply two smoothing heuristics as follows. 1. If one cluster is completely contained in another one, the smaller cluster is deleted. 2. If the differences between two clusters are within a small margin and, additionally, the number of elements of both clusters exceeds a certain percentage with respect to the total number of elements of both clusters, the smaller cluster is deleted and the tags not included in the larger one are added to it. The second smoothing heuristics is depicted in Algorithm 3, where #(cl1) and #(cl2) denote the number of elements within the clusters cl1 and cl2, respectively. The relevant threshold in this algorithm is thcl. Algorithm 3 Second Smoothing Heuristics for Two Clusters #ðcl1 \cl2 Þ if #ðcl  thcl 1 [cl2 Þ 1Þ and thcl  #ðcl#ðcl 1 Þþ#ðcl2 Þ #ðcl2 Þ and thcl  #ðcl1 Þþ#ðcl2 Þ then remove(cl1), remove(cl2) and insert(cl1\cl2)

Step 12: Create Ontologies All the terms occurring in a cluster are assumed to be related to each other in some way. The concrete type of the inter-tag connections is, nevertheless, hardly resolvable. We consider this limitation to be of less importance for creating lightwight ontologies. We use the SKOS standard (http://www.w3.org/

3 Enterprise Knowledge Structures

51

2004/02/skos/), which allows establishing associative links between concepts without the need to further specify their semantics. More precisely, the SKOS property skos:related can be used to designate all kinds of relationships amongst terms within one cluster. The clusters themselves are considered to be the domain of the ontology, for which meta-properties (e.g., by using Dublin Core) can be included. In SKOS, skos:ConceptScheme is used to identify a certain ontology. As a consequence, all entities within this scheme have to include a reference to this scheme; this is achieved through the construct skos:inScheme. The terms within a cluster represent the entities the ontology consists of. This direct mapping is possible as within the SKOS language, there is no distinction between classes and instances. The construct to designate these entities is skos:Concept (Fig. 3.8). The SKOS constructs previously mentioned allow us to define the basis structure of the ontologies. The information that was collected with respect to translations, spell-checks, and so on, is used to enrich the ontologies. The preferred label for a concept is the respective representative of a tag group, which is denoted by skos:prefLabel. If there are other terms within the same group of tags, which do occur in Wordnet, the corresponding term can be considered as a valid substitute for the preferred label, information which is captured through the skos: altLabel construct. As SKOS does allow language distinctions, this feature is

Fig. 3.8 Example ontology created through our method

52

B. Ell et al.

also used for both preferred labels and alternative labels. If a translation was found for a tag, this information is attached to the label, otherwise the label is considered to be English. This is done by using standard XML annotation, e.g., skos: prefLabel xml:lang ¼ “EN”. All other tags of a certain group are considered to be “hidden labels” for the corresponding concept. The set of labels marked by skos:hiddenLabel comprises common spelling mistakes.

3.3.2.2

Integrating Freebase into Semantic MediaWiki

This section gives a brief overview of an extension to SMW that allows the use of inline queries to query Freebase (http://www.freebase.com) content via a mediator. The mediator creates an MQL query (Metaweb Query Language, the query language used in Freebase), handles the communication with Freebase, and returns query results in the same way as for conventional SMW inline queries. A full documentation of the extension is available in (Ell 2009). Imagine you want to create a list of all European countries and their populations within your SMW-based knowledge management system. This information is available in general-purpose knowledge bases such as Freebase, and can be imported into the local SMW installation. The query statement could look as follows, where the source argument is an extension of the original AskQL syntax indicating the external knowledge base to be used. {{#ask: [[Category:Country]] [[Located in::Europe]] | ?Population | source ¼ freebase }} The AskQL query has to be translated into an MQL query, which could look as follows. [{ "/type/object/name" : null, "/location/statistical_region/population" : [{ "number" : null }], "/type/object/type" : "/location/country", "/location/location/containedby" : [{ "/type/object/name" : "Europe" }] }] In order to be able to perform this translation additional information is needed. In this case it is necessary to know that

3 Enterprise Knowledge Structures

53

1. the category Country maps to /location/country, 2. the property Located in maps to /location/location/containedby, and 3. the print request Population maps to /location/statistical_region/population where the field storing the value has the name number. The transformation, which essentially follows a local-as-view approach, is presented in detail in (Ell 2009). Mapping information is stored in pages via properties, thus being editable and reusable for various inline queries. Category mapping information is stored on category pages using the property freebase category mapping. For example the page Category:City (the page describing this category in the category namespace) may contain the statement [[freebase category mapping::/location/citytown]]. Page mapping information is stored on pages in the main namespace using the property freebase page mapping. For example the page Karlsruhe may contain the statement [[freebase page mapping::#9202a8c04000641f80000000000b283e]]. Property mapping information is stored on property pages using the properties freebase property mapping and freebase property type. For example the page Property:Population (the page describing this property in the property namespace) may contain the statements [[freebase property mapping::/location/statistical_region/population ;number]] and [[freebase property type::number]]. Path elements are separated by ‘;’. If no type mapping is specified then the standard type string is assumed per default. Print request mapping information is stored on property pages since print requests relate to properties. For storing the mapping information the property freebase pr mapping is used. For example the property page Property:Located in may contain the statement [[freebase pr mapping::/location/location/containedby]]. In case the mapping information is missing or can not be properly interpreted, the extension behaves as follows. Ambiguities The page where mapping information is expected to be contained may contain the mapping property multiple times. For example a category page may contain several properties with the property name freebase category mapping. In this situation the mapping information is ambiguous and only the first result returned by the SMW database is used. Property type If the property type of a property is not given using freebase property type then type string is assumed. Page mapping information missing If no page mapping exists for page P then an MQL query is created where an entity is requested with name P. If the query is specified with parameter language ¼ L then an MQL query is created that requests an entity that has the name P in language L. Category mapping information missing If no category mapping information is found then the category statement and all subordinated statements in the description object tree returned by the query processor are ignored.

54

B. Ell et al.

Property mapping information missing If no property mapping information is found then the property statement and all subordinated statements in the description object tree returned by the query processor are ignored. This behavior is robust since missing mapping information is ignored. In case of ambiguities or missing mapping information, a warning is displayed to the user. Thereby a step-by-step development and improvement of the query is supported.

3.3.3

Repairing Knowledge Structures

Quality issues are a natural consequence of the collaborative, integrated knowledge engineering approach followed by Semantic MediaWiki and its extensions. Therefore, our solution also includes techniques to support users in detecting and correcting potential modeling errors or missing information. This section provides an overview of the types of quality issues we deal with and the implementation of the associated knowledge repair functionality. Similar Names In an ontology we have different types of entities. A common issue with adding entities to an ontology is that a user might overlook that the entity she intends to add is already in the ontology with a name slightly different from the name the user would have chosen. By adding the entity, the user introduces redundancy to the ontology which makes the ontology unnecessarily larger, and more error prone. To avoid such issues we measure similarities between entities via the Levenshtein distance, and present the results to the user, who then has to decide whether the entities under consideration represent the same and thus should be merged, or whether they do not represent the same and therefore should be kept separately in the ontology. Similar Property Sets The idea here is to compare the property sets of ontology classes in order to identify potential similarities. The ontology editor introduced in Sect. 3.3 displays all the sibling categories which have at least 50% of their properties in common (see Fig. 3.12) for the user to decide for appropriate action. Cycles and Redundancies This measurement identifies cycles within a specialization-generalization hierarchy (see Fig. 3.9). Similarly the knowledge repair functionality includes means to identify redundant is-a relationships, which are presented as decision support to the user. Missing Properties The underlying rationale for this metric is the inherent difficulties experienced by knowledge modelers in distinguishing between the data and the schema level of an ontology. Here we display those ontological primitives that do not have any successors in the hierarchy, thus indicating missing specialization-generalization properties or misclassifications of specific entities as classes or instances. Category knowledge repair The previously discussed attempts to solve problems are used primarily by certain users who aim at keeping the knowledge base consistent. The methods mentioned enable the user to get an idea which categories are part of a problem of the knowledge base no matter which taxonomy

3 Enterprise Knowledge Structures

55

Fig. 3.9 Categories in cycles, categories with redundant relationships and entities with similar names

they belong to. However, there are also users who create an ontology because the domain under consideration is a domain of interest of such a user. Therefore the user might be keen on creating an error-free ontology. Instead of using each approach sequentially in order to resolve the issues about a certain category, the user also has the possibility to get all information about one category at a time. Besides the previously mentioned methods the user gets also information about minimum, average and maximum values which can be compared to the values of the category under consideration as well as information about the meaning of certain figures, which is useful for the non experienced users. In order to guide the attention of the user to severe problems these are marked with a symbol or red color. Minor problems are marked and all the other information is not marked (see Fig. 3.10). Category statistics Some of the previously described methods provide the user with information of all categories regarding one specific type of problem. The method Category knowledge repair in contrast provides the user with information of all the types of problems regarding one specific category. This approach combines these two types of problem solving attempts. It displays all categories together with the results of each problem solving attempt. Therefore the user gets all information about issues regarding all categories. The use of this approach is to have a global view on the situation of taxonomies and the categories. Without such a comprehensive view it can be rather difficult to solve issues which spread over many categories. Then a user would have to jump from one category to another many times to resolve an issue. This gets more complicated if the branching of the category under consideration is more complex than it is with a category only having one supercategory and one subcategory. So far, the user gets quite the same information for all categories, as he does when using the Category knowledge repair approach for one specific category. In order to guide the attention of the

56

Fig. 3.10 Category knowledge repair

Fig. 3.11 Category statistics

B. Ell et al.

3 Enterprise Knowledge Structures

57

Fig. 3.12 Category histogram and categories with similar property sets

user to severe problems these are eye-catchingly marked. Minor problems are highlighted and all the other information is not marked as seen in the figure (see Fig. 3.11). Category and Property Histogram In an ontology we have many entities starting with different letters. In order to get an overview of the distribution of entities starting with a specific letter in the ontology in relation to the alphabet a histogram can be very useful. It provides a comprehensive view on how many entities start with a specific letter in comparison to other letters (see Fig. 3.12). A normalized histogram can point out unusual things, however this requires that there is a certain number of entities in the database. The more entities there are the more likely they will follow a specific distribution regarding their first letters.

3.4

Conclusions

The chapter has covered the area of enterprise knowledge structures, starting from the requirements and research questions derived from use cases all the way to methodologies and implementations to bridge the different heterogenous structures that are in use today. We expect that a common language for representing knowledge structures will foster further development and research in this area. The research results presented in this chapter are examples of what can be achieved once some foundational questions (such as the representation language or the necessary expressivity) have been settled, and we can move forward towards unifying knowledge management

58

B. Ell et al.

tools and methodologies, further integrating results from heterogeneous areas in order to support the knowledge worker to the fullest possible extent. Enterprise knowledge structures are heterogeneous in nature, and their integrated use requires a framework that allows understanding the trade-offs between different structures, and optimizes for given scenarios. Many enterprises may already apply folksonomy-like systems. We have shown how folksonomies can be used as the foundation for developing lightweight ontologies which can then be in turn used to connect to further knowledge sources. Besides tagging, we have explored further Web 2.0 inspired paradigms, and implemented extensions to a wiki-based system that allows for the seamless integration of external data sources like Flickr or a company database. This system allows for explicit but lightweight management of an ontology within the wiki-interface, and powerful gardening and knowledge quality assessment tools.

References Ankolekar A, Kr€otzsch M, Tran T, Vrandecˇic´ D (2007) The two cultures: mashing up web 2.0 and the semantic web. In: WWW ’07: proceedings of the 16th international conference on world wide web, ACM Press, New York, pp 825–834, ISBN 9781595936547. doi: 10.1145/ 1242572.1242684, URL http://dx.doi.org/10.1145/1242572.1242684. 2007 Begelman G, Keller P, Smadja F (2006) Automated tag clustering: improving search and exploration in the tag space. In: Proceedings of the collaborative web tagging workshop co-located with the 15th international world wide web conference (WWW2006), 2006 Cattuto C, Loreto V, Pletronero L (2007a) Semiotic dynamics and collaborative tagging. Proc Nat Acad Sci U S A 104(5):1461 Cattuto C, Schmitz C, Baldassarri A, Servedio VDP, Loreto V, Hotho A, Grahl M, Stumme G (2007b) Network properties of folksonomies. AI Commun 20(4):245–262 Drakos N, Rozwell C, Bradley A, Mann J (2009) Magic quadrant for social software in the workplace. Gartner RAS core research note G00171792, Gartner. http://www.gartner.com/technology/ media-products/reprints/microsoft/vol10/article4/article4.html. Accessed date Jan 2010 Ell B (2009) Integration of external data in semantic wikis. Master thesis, Hochschule, Mannheim, 2009 Fellbaum C (1998) WordNet: an electronic lexical database. MIT Press, Cambridge, MA Fensel D (2001) Ontologies: silver bullet for knowledge management and electronic commerce. Springer, Berlin Gangemi A, Guarino N, Masolo C, Oltramari A, Schneider L (2002) Sweetening ontologies with DOLCE. vol 2473 of Lecture notes in artificial intelligence (LNAI), Springer, Siguenza, Spain, pp 166–181, ISBN 3-540-44268-5 Gene Ontology Consortium (2000) Gene ontology: tool for the unification of biology. Nat Genet 25:25–30 Grau BC, Horrocks I, Motik B, Parsia B, Patel-Schneider P, Sattler U (2008) OWL 2: the next step for OWL. Web Semant Sci Serv Agent World Wide Web 6(4):309–322. ISSN 1570–8268. doi: http://dx.doi.org/10.1016/j.websem.2008.05.001 Gruber TR (1993) A translation approach to portable ontology specifications. Knowl Acquis 5 (2):199–220 Guarino N (1998) Formal ontology and information systems. In: Guarino N (ed) Proceedings of the first international conference on formal ontologies in information systems (FOIS), vol 46 of Frontiers in artificial intelligence and applications, IOS-Press, Trento, Italy, 1998

3 Enterprise Knowledge Structures

59

Haase P, Herzig DM, Musen M, Tran DT (2009) Semantic wiki search. In: 6th annual european semantic web conference, ESWC2009, vol 5554 of LNCS. Springer Verlag, Heraklion, Crete, Greece, pp 445–460, Juni 2009 Hartmann J, Sure Y, Haase P, Palma R, Sua´rez-Figueroa MC (2005) OMV – Ontology metadata vocabulary. In: Welty C (ed) Ontology patterns for the semantic web workshop, Galway, Ireland, 2005 Horrocks I, Patel-Schneider PF (2004) Reducing OWL entailment to description logic satisfiability. J Web Semant 1(4):7–26 Kr€ otzsch M, Vrandecˇic´ D, V€ olkel M, Haller H, Studer R (2007) Semantic wikipedia. J Web Semant 5:251–261 Lenat DB (1995) CYC: a large-scale investment in knowledge infrastructure. Commun ACM 38 (11):33–38 Leveshtein VI (1966) Binary codes capable of correcting deletions, insertions, and reversals. Soviet Physics Doklady 10:707–710 McGuiness DL (2003) Ontologies come of age. In: Fensel D, Hendler J, Lieberman H, Wahlster W (eds) Spinning the semantic web: bringing the world wide web to its full potential. MIT Press, Cambridge, MA Motik B, Grau BC, Horrocks I, Wu Z, Fokoue A, Lutz C (2008) OWL2 web ontology language: profiles. W3C Working Draft 2 December 2008, Available at http://www.w3.org/TR/2008/ WD-owl2-profiles-20081202/. Pease A, Niles I, Li J (2002) The suggested upper merged ontology: a large ontology for the semantic web and its applications. In: Working notes of the AAAI-2002 workshop on ontologies and the semantic web, 2002 Simperl E, W€olger S, B€ urger T, Siorpaes K, Han S-K, Luger M (2010) An ontology authoring tool for the enterprise 3.0. Taylor and Francis Publishing, 2010, London Simpson E (2008) Clustering tags in enterprise and web folksonomies. Technical Report HPL2008-18, HP Labs, 2008 Sowa JF (1995) Top-level ontological categories. International Journal of Human-Computer Studies 43(5/6):669–685. ISSN 1071–5819. doi: http://dx.doi.org/10.1006/ijhc.1995.1068 Specia L, Motta E (2007) Integrating folksonomies with the semantic web. In: Proceedings of the 4th European semantic web conference (ESWC2007), pp 624–639, 2007 Uschold M, Grueninger M (1996) Ontologies Principles, Methods and Applications. Knowledge Engineering Review 11(2):93–155 Vrandecˇic´ D (2009) Towards automatic content quality checks in semantic wikis. In: Social semantic web: where web 2.0 meets web 3.0, AAAI spring symposium, Springer, Stanford, CA, March 2009a Vrandecˇic´ D (2009) Ontology evaluation. PhD thesis, Karlsruhe Institute for Technology, Germany, 2009b Vrandecˇic´ D, Kr€otzsch M (2006) Reusing ontological background knowledge in semantic wikis. In: V€olkel M, Schaffert S (eds) Proceedings of the first workshop on semantic wikis – from wiki to semantics, Workshop on Semantic Wikis. AIFB, ESWC2006, June 2006. URL http:// www.aifb.uni-karlsruhe.de/Publikationen/showPublikation?publ_id¼1211

4

Using Cost-Benefit Information in Ontology Engineering Projects Tobias B€ urger, Elena Simperl, Stephan W€ olger, and Simon Hangl

4.1

Introduction

Knowledge-based technologies are characterized by the use of machine-understandable representations of domain knowledge – in form of ontologies, taxonomies, thesauri, folksonomies, and others – as a baseline for the realization of advanced mechanisms to organize, manage, and explore information spaces. These technologies have been promoted since the nineties, or even earlier, but experienced a real revival only with the raise of the Semantic Web almost a decade ago. Primarily introduced by Sir Tim Berners Lee, the originator of the World Wide Web, the idea of providing the current Web with a computer-processable knowledge infrastructure in addition to its current, semi-formal and human-understandable content foresees the usage of knowledge structures which can be easily integrated into, and exchanged among arbitrary software environments in an operationalized manner (Berners-Lee et al. 2001). In this context, these structures are formalized using Web-suitable, and in the same time semantically unambiguous representation languages; are pervasively accessible; and can be – at least theoretically – shared and reused across the World Wide Web. Complementarily, similar forms of knowledge organization, typically referred to as ‘folksonomies’, emerged in the realm of Web 2.0, most prominently in relation to technologies and platforms promoting community-driven knowledge

T. B€urger (*) Capgemini Carl-Wery-Str. 42, Munich D – 81739, Germany e-mail: [email protected] E. Simperl Karlsruhe Institute of Technology, KIT-Campus S€ ud, D-76128 Karlsruhe, Germany e-mail: [email protected] S. W€olger • S. Hangl Semantic Technology Institute, ICT – Technologie Park Innsbruck, Technikerstraße 21a, A-6020 Innsbruck, Austria e-mail: [email protected]; [email protected] P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5_4, # Springer-Verlag Berlin Heidelberg 2011

61

62

T. B€ urger et al.

management and sharing. Just as many other (by-) products of Web 2.0 enterprises, they are mainly user-generated, and can be enriched with formal meaning and transformed into characteristically lightweight, machine-understandable, widely accepted ontologies. Chapter ‘Enterprise Knowledge Structures’ provides an overview of the various forms of knowledge organization populating the enterprise knowledge management landscape, of their characteristics, relationships, and of the ways they can be created and maintained. The benefits of semantic technologies across business sectors and application scenarios have been investigated at length in the Semantic Web literature of the past decade (Davis et al. 2003; Fensel 2001; Hepp et al. 2008; McGuinness 2003). Nevertheless, most discussions have been carried out at the technical level, and an economic analysis of ontology-based applications in terms of their development, deployment and maintenance costs – or of any kind of tangible return value assessment – have only been recently considered. In previous work of ours we have introduced a series of models that analyze and predict the costs and benefits associated with the development of knowledge structures such as ontologies, taxonomies and folksonomies, and of the semantic applications using them (B€urger et al. 2010; Paslaru Bontas Simperl et al. 2006; Popov et al. 2009; Simperl et al. 2009b; Simperl et al. 2010). We will not introduce these models here, as they have been extensively described in previous publications of ours which the reader is kindly referred to. This chapter can be seen as a continuation of our work – while in past publications we have focused on the definition of the models and their evaluation, this chapter is concerned with the application of the models in enterprise projects and provides guidelines – both scenario and tool-oriented – that assist project managers in utilizing the models throughout the ontology life cycle. The remainder of this chapter is structured in three parts. The first part gives a brief overview of the results of a survey performed between October 2008 and March 2009 of 148 ontology engineering projects from industry and academia. We have analyzed the findings of this survey in order to identify how cost-related information could be of use to alleviate some of the issues ontology engineering is currently confronted with. The second part investigates the life cycle of ontologies and ontology-based applications and presents 15 scenarios in which cost-benefit information could support decision-making. The third part proposes a number of methods and tools by which models such as ONTOCOM, FOLCOM or SEMACOM can be applied in these scenarios in an operationalized manner.

4.2

The Impact of Cost-Benefit Information on Ontology Engineering Projects

In this section we briefly present the results of a six months empirical survey that collected data from 148 ontology engineering projects from industry and academia in order to give an account of the current ontology engineering practice,

4 Using Cost-Benefit Information in Ontology Engineering Projects

63

and the effort involved in these activities. Through its size and the range of the subjects covered, the survey gives a comprehensive overview of the current state of practice in ontology engineering as of 2009. A detailed report and analysis of its findings has been published in (Simperl et al. 2009a). For the purpose of this chapter, we will focus on those aspects which refer to activities in which decisions could be influenced by the availability of reliable cost-benefit information. The survey pointed out that the use of methodological support for developing ontologies clearly varies from project to project. Concrete use of an ontology engineering methodology was, for instance, observed only in one out of nine projects. As improvement in ontology engineering is concerned, participants suggested the following: Project settings in which domain-analysis and evaluation needs run high, mandate domain-specific customizations of the generic methodologies available. This can be confirmed by our data analysis, which indicates low tool-support for these ontology-engineering activities. High toolsupport, therefore, was shown to reduce development time considerably. Such customizations might be particularly beneficial for very complex domains, for the development of ontologies with broad coverage, and for those that involve noncommon-sense knowledge such as life sciences. A last issue to be highlighted, in particular as more and more high-quality ontologies are becoming available, is ontology reuse. Our survey showed that reuse is still not systematically performed, and often hampered by technical obstacles. While the adoption of ontology-based technologies will continue, it is likely that such scenarios will gain in relevance and significant efforts will need to be invested in revising existing ontology reuse methods, techniques and tools towards providing the adequate level of support for non-technical users.1 With respect to process-related aspects we could observe discrepancies between (1) the complexity of particular activities as perceived by ontology engineering practitioners; (2) the significance of these activities as measured in terms of their impact on the total development costs; and (3) the level of maturity achieved at present by the R&D community with respect to methods and tools supporting these activities. To further investigate these discrepancies, we analyzed the correlation between various ontology engineering aspects which are covered by the survey.

1

The survey did not cover reuse efforts related to the usage of ontologies in the context of the Linked Open Data (LOD) initiative, where a (relatively small) number of vocabularies is reused through so-called ’interlinking’. With LOD acting as a real game-changer in the semantictechnologies landscape, a new survey is required in order to fully understand the state-of-practice of ontology engineering in such data-driven scenarios.

64

4.2.1

T. B€ urger et al.

Correlation between Ontology Engineering Aspects and Total Effort

Table 4.1 shows the correlation between ontology engineering aspects and the actual project effort in person-months.2 DCPLX Out of the six positively correlated factors, domain analysis was shown to have the highest impact on the total effort, achieving a significantly higher correlation value over the other five activities. This is an assessment of the timeconsuming nature of the knowledge-acquisition process, which was also confirmed by comments received from the participants in the interviews, and by previous surveys in the field. As our results point out, tool support for this activity was very poor. Many interviewees questioned the utility of available tools, which were perceived as too generic especially when it came to ontologies developed for highly specialized domains such as health care, or in projects relying on end-user contributions. In addition, participants shared the view that process guidelines tailored for such specialized cases are essential for the success of ontology engineering projects. Existing methodologies are very generic when it comes to issues of knowledge elicitation. They state the imperative need of a close interaction between domain experts and ontology engineers, but extensive studies on using techniques such as concept maps, card sorting and laddering (Cooke 1994) are largely missing. These particular techniques, complemented with detailed insights on the practices established in the respective domains, could be very useful to design specially targeted methodologies and guidelines for ontology engineering. Table 4.1 Correlation between ontology engineering aspects and effort Ontology engineering aspect Description Correlation DCPLX Complexity of the domain analysis 0.496 CCPLX Complexity of the ontology conceptualization 0.237 ICPLX Complexity of the ontology implementation 0.289 REUSE Percentage of integrated reused ontologies 0.274 DOCU Complexity of the documentation task 0.346 OE Ontology evaluation 0.362 OCAP/DECAP Capability of the ontologists/domain experts 0.321 OEXP/DEEXP Expertise of the ontologists/domain experts 0.192 PCON Personnel continuity 0.134 LEXP/TEXP Level of experience with respect to languages and tools 0.172 SITE Communication facilities in decentralized 0.168 environments

2 We use the cost-driver abbreviations defined in the ONTOCOM model [Popov et al. 2009]. A positive correlation means, that, if the value of one factor rises, the other rises as well; the opposite holds for negatively correlated factors. For instance, if OCAP decreases, the effort is expected to rise.

4 Using Cost-Benefit Information in Ontology Engineering Projects

65

OE The quality of the implemented ontology remains a major concern among ontology engineers. Nevertheless, the projects we surveyed seldom used any of the existing ontology-evaluation methods and techniques, but relied on expert judgement. In projects in which systematic ontology-evaluation practices were observed, they immediately had a significant impact on the effort. More than 50% of surveyed projects reported minor effort in formally testing the ontologies they developed. Other 48% reported fair use of simple testing methods which were mostly carried out manually. Only three projects performed extensive testing using several methods. The survey indicated a combination of manual testing and self-validation by the engineering team as the preferred and common choice in most projects. At this juncture, ontology evaluation plays a passive role in ontologies developed in less formal project settings such as in academia. However, as ontology-evaluation practices increase with the demand for quality assurance, the associated impact on effort can be substantial. DOCU Documentation proved to be a costly factor as well. The survey results point out that most of the developers of highly-specialized ontologies perceived documentation as a resource-intensive activity. This was not necessarily true for less complex ontologies, and in cases where the development process was less formal. CCPLX, ICPLX The ontology conceptualization, which is responsible for the modeling of the application domain in terms of ontological primitives (concepts, relations, axioms), and the ontology implementation where the conceptual model is formalized in a knowledge-representation language, are positively correlated factors. However, their impact on the total effort is not as high as the one of the domain analysis or the ontology evaluation. This outcome speaks for the relatively well understanding and high-quality tool support for these activities of the ontology engineering process. OCAP/DECAP, OEXP/DEEXP, LEXP/TEXP The impact of the personnelrelated aspects suggests that more training programs in the area of ontology engineering, better collaboration support, and an improved, more fine granular documentation of the decisions taken during the ontology engineering process may have positive effects. SITE The data analysis produced counter-intuitive results for the SITE parameter which accounts for the degree of distribution of the team and their com munication and collaboration facilities. Here the analysis suggested that email communication lowered the effort needed to build ontologies while frequent faceto-face meetings increased the effort significantly. This could be based on the assumption that face-to-face meetings produced more different views on the onto logy, and resulted in more discussions which, of course, raise the costs of ontology development. The slight dominance of factors such as DCPLX (domain analysis) and OE (ontology evaluation) indicates that any facilitation in these activities may result in major efficiency gains. Even though tools such as wikis may be helpful especially in collaborative settings, they are still rarely used for the purpose of domain analysis. More generally, the results of the interviews indicated a low tool support

66

T. B€ urger et al.

for this task. This situation could be improved by applying methods such as automated document-analysis, or ontology learning approaches, to support the analysis of the domain, the assessment of the information sources available and the knowledge-elicitation process. Extending existing methodologies with specific empirically determined practices in place in particular vertical domains could also have a positive effect. A similar conclusion can be drawn for ontology evaluation. Despite of the availability of automated approaches such as unit tests, consistency checks or taxonomy-cleaning techniques, ontology evaluation still lacks tools which are easy to use and comprehensible for most users. Concluding the correlation analysis between ontology engineering aspects and effort, we can state that process activities such as domain analysis, conceptualization, implementation and evaluation, as well as the level of reusability of the ontology, and the documentation requirements have a well-distributed correlation factor associated with the effort. This means that each of these activities exhibits a relevant impact on the effort, while at the same time indicating that no individual activity plays a overwhelmingly dominating role. As expected, the quality of the ontology engineering team is crucial for the success of a project; it would be interesting to investigate, however, the effect of such aspects in more collaborative scenarios, which could become the norm in ontology engineering. The data set on which this analysis is based on is not relevant to highly decentralized scenarios of community-driven ontology engineering. More research is needed to assess the state of the art in the area of ontology reuse and associated activities such as ontology understanding, merging, and integration. In this respect the survey is not representative and should be revisited once this engineering approach gains more importance, for instance, as a consequence of the wide scale development of a critical mass of ontologies in diverse vertical sectors. An additional, equally interesting scenario is related to the increased popularity of datadriven, LOD-oriented approaches, which reference vocabularies already in use in the LOD cloud. Reuse is defined not necessarily at the level of ontologies to be assessed, selected, modified and integrated, but in terms of data sets and mappings between them. Provided a clear understanding of these new concepts, the costs associated with such knowledge engineering exercises, and models which potentially apply to the new scenarios, require further investigation.

4.2.2

Correlation between Ontology Engineering Aspects

In addition to the impact on the total development effort we analyzed the correlation between specific aspects of ontology engineering projects. The most important findings are discussed in the following. Personnel-related aspects (Table 4.2) were shown to be positively correlated. This was obvious for those questions referring to the capability and experience of the ontology-engineering team. In most cases the survey showed that the capability of the participants was largely based on their project experience. Additionally, the

4 Using Cost-Benefit Information in Ontology Engineering Projects Table 4.2 Correlation between personnel-related aspects

Table 4.3 Correlation between process-related aspects

OCAP/DECAP OEXP/DEXP LEXP/TEXP

OE

OCAP/DECAP 1 0.552 0.489

DCPLX 0.211

67

OEXP/DEXP 0.552 1 0.584

DOCU 0.389

software support available to projects carried out by the same ontology-engineering team tended to remain unchanged. When new tools were introduced, the learning period for experienced practitioners was much higher than for novel developers. Similar observations were made in software engineering, in which habits of software use have a significant influence on acceptance and adoption of new software. High correlation values were also measured between activities within the ontology engineering process (Table 4.2). One, in particular, was between ontology evaluation and ontology documentation (Table 4.3). Data analysis showed that these results mainly apply to large-scale ontology engineering projects. This is possibly due to the fact that such ontology-development projects run more extensive evaluation tests, which in turn might lead to additional documentation effort. Domain analysis was most highly correlated with conceptualization and implementation. The majority of the interviewees did not perceive a clear cut between the conceptualization and the implementation activities. Conceptualization in most cases was a lightweight description and classification of the expected outcomes. In most of the projects surveyed there was no language- or tool-independent representation of the ontology. Instead, the ontology was implemented with the help of an ontology editor. In over 40% of the projects the development was performed mainly by domain experts, who generally agreed that current ontology editors are relatively easy to learn and utilize. This finding is different from the observations of previous surveys and comparative studies, and confirms one more time the fact that ontology engineering has reached an industry-strength level of maturity. According to this survey, in ontology engineering the main technological building blocks and development platforms are meanwhile available from established vendors. Despite this promising position, the information known about the process underlying the development of ontologies in practice is still very limited. Costbenefit information might lead to improvements along the lines we have argued above. We have used the findings of the correlation analysis to identify scenarios in which ontology engineering processes can be improved by paying proper attention to cost-benefit information delivered through models developed in the ACTIVE project.

68

4.3

T. B€ urger et al.

Guidelines for Using Cost-Benefit Information in Ontology Engineering

Starting with the findings of the survey discussed in the previous section, we have performed an analysis of the ontology life cycle with respect to the utility of costbenefit information for decision-making purposes. In order to provide measurements of specific key indicators throughout the ontology life cycle, clear goals for improvement have to be defined. This is crucial not only for the selection of the relevant indicators, but also for the definition of associated methods and tools, and for directing the acquired information to the right recipient. This can be achieved, for instance, through the GQM (‘goal-questionmetric’) approach (Ebert and Dumke 2007). GQM proposes three steps to identify suitable metrics by (1) first defining the goals to reach (i.e., business objectives, key performance indicators, improvement goals), (2) then reviewing the goals by asking appropriate questions to reach the goals (i.e., improvement programs, change management, project management techniques), and (3) finally, by defining measurements to assess the current status (i.e., to review the work of employees, and the development status of products or processes) (Ebert and Dumke 2007). To identify how the availability of cost-benefit information could impact the operation of ontology engineering projects, we will develop GQM templates for a series of scenarios and activities, in which such information is expected to provide an improved baseline for decision making.

4.3.1

Using Cost-Benefit Information Throughout the Ontology Life Cycle

From an enterprize perspective the ontology life cycle – just as any other product life cycle – consists of four phases: (1) business case and strategy development, (2) project and concept definition, (3) development and market entry, and (4) maintenance and evolution. In each of these phases cost-benefit information is typically used to support decision making (Ebert et al. 2005): Business case and strategy development Cost-benefit information might be used to support a trade-off analysis according to (development) time, costs, content, benefit, or return of investment (ROI). Project and concept definition Here this information is typically used to make effort estimates, to develop budget plans, and to support buy vs reuse decisions. Development and market entry Cost-benefit information might be used to support trade-off analysis and to determine the costs to completion. Additionally it might be used to influence the development process, staffing and tool acquisition, and to perform progress controls.

4 Using Cost-Benefit Information in Ontology Engineering Projects

69

Maintenance and evolution In this phase one could assess the costs and benefits of extensions in order to decide for repair against replacement, and to estimate maintenance costs. We can distinguish between a number of recipients of this information. This includes the senior management of the company, the project management team, and the engineers. They use cost-benefit information as follows (Ebert and Dumke 2007): Senior Management They use the information – – – –

To obtain an reliable view on the business performance; For forecasts and indicators where action is needed; To drill down into underlying information and commitments; and For flexible resource refocus. Project Management Project managers appreciate cost-benefit information

– – – –

For immediate project reviews; To check the status and forecast for quality, schedule, and budget; To identify follow-up action points; and To generate reports based on consistent raw data.

Engineers During the development phase engineers rely to cost-benefit information – To gain immediate access to team planning and progress insights; – To get an overview into own performance and how it can be improved; and – To identify weak spots in deliverables.

4.3.2

Scenarios Supported by Cost-Benefit Information

This section defines scenarios in which cost-benefit information can help to support decisions in knowledge engineering projects. The scenarios will be further detailed in Sect. 4.3. Supporting the Business Case Development Phase In this phase, cost-benefit information will mostly be used by the senior management planning a new business or the introduction of a new technology. The information has to be based on data from historical projects in order to be able to derive estimations based on experiences from previous endeavors. In some cases, experience reports or analytical insights may prove useful as well (B€ urger and Simperl 2008), but the ultimate goal is to have an objective baseline to decide for or against the introduction of semantic technologies at a general level. Scenario 1.1 Introduction of an ontology-based application Cost-benefit information can be used to support the decision whether or not an ontology-based application should be introduced and/or developed inside a company.

70

T. B€ urger et al.

Scenario 1.2 Development of certain features Here information about the costs and benefits of ontology engineering can be used to assess the economic implications of specific features to be introduced in an application, or to define the scope of an ontology to be developed. Scenario 1.3 Expressivity/Type of knowledge structure Based on a set of initial requirements, insights about the efforts and added value associated with the development and maintenance of specific knowledge structures can be used to decide upon the most appropriate type of knowledge structure, in particular about the required expressivity, to support a certain business plan. The aim is to perform a trade-off analysis between costs and benefits of the use of ontologies, taxonomies, folksonomies, and other knowledge structures, using as input the results delivered by methods such as ONTOCOM (Simperl et al. 2009b) or FOLCOM (Simperl et al. 2010). Supporting the Project Definition Phase In this phase, the information will be used by the project management but also by the senior management team. Relevant decisions include the overall planning of a project, but also rather specific issues such as buy vs reuse vs in-house development. Decisions should be backed up with detailed requirements in order to be able to provide accurate estimates. Scenario 2.1 Effort planning Cost information can foremost be used to estimate the effort needed to realize a project. Scenario 2.2 Project planning Cost information can support project planning and help to estimate the length of certain project phases. Scenario 2.3 Team building Both cost and benefit measurements can be used to assess the performance of team members with certain skill levels, and, provided the availability of such measurements from previous projects, the information can be used to support the initial assignment of staff to project teams. Scenario 2.4 Tool acquisition Historical cost-benefit information typically allows to judge the efficiency of the team in different project phases based on the tools used. This information can be used in the planning phase of new projects to decide about tools to use or purchase. Scenario 2.5 Develop vs buy vs reuse Based on methods such as ONTOCOM, associated with a deep knowledge of the existing ontologies that are relevant for the project at hand, the project management decides whether to buy, reuse, or develop an ontology from scratch. Supporting the Development Phase Cost-benefit information can be used to influence decisions in iteratively organized processes, in which, for instance, the development of ontologies undergoes certain revisions, which is common for collaborative ontology engineering. During the planning of a new iteration, different development options can be assessed against their economic feasibility in terms of expected costs or expected benefits. In non-iterative projects, the same information can be used to assess the performance of the development process and to make necessary adjustments. This can either be based on cost information, but also on benefit information, indicating that certain features do not receive the necessary acceptance among a preliminary user base.

4 Using Cost-Benefit Information in Ontology Engineering Projects

71

Scenario 3.1 Length of development cycles Cost-benefit information can be used to adapt the length of revision cycles as a trade-off between the benefit of an ontology which might not meet the requirements of all its stakeholders and the costs of its development. Scenario 3.2 Performance assessment Monitored cost-benefit information can be used for performance assessment of the team, or of the status of certain features during project iterations. Scenario 3.3 Revision planning Information from past iterations can be used to do just-in-time revision planning and to revise priorities, to re-assign team members to tasks, or to discontinue the development of certain features. Supporting the Maintenance Phase The scenarios introduced so far reflect needs arising at the beginning of the maintenance phase, but also during the use phase of a developed ontology, or ontology-based application. Monitored benefit information can be used to support extension planning, i.e., to judge what type of benefit might be expected from an extension. Benefit information can also be used to judge on the discontinuation of certain application features. Cost information might most notably be used to decide about repairing or replacing broken features by newly acquired or developed parts of an ontology or ontology-based application. Scenario 4.1 Extension planning Information acquired in the use and maintenance phase of a project can support the planning of extensions into directions in which more benefits are expected. Scenario 4.2 Replace vs repair Information on development performance can be used to judge whether to replace or repair a broken or insufficiently developed feature. Scenario 4.3 Maintenance planning Information acquired in previous projects can help to estimate maintenance costs and to establish staffing plans for this phase. Scenario 4.4 (Dis-)continuation of features Especially benefit information acquired in the usage phase can provide valuable hints on the acceptance of certain features. We now turn to the presentation of guidelines supporting these scenarios.

4.3.3

Guidelines for the Realization of the Scenarios

The guidelines will be presented in form of GQM templates for each of the 15 scenarios, together with an analysis of the cost models developed in the ACTIVE project with respect to their suitability for the realization of the scenarios and potential adjustments and extensions. Scenario 1.1 Introduction of an Ontology-based Application As explained in the previous section, the purpose of this scenario is to provide methods and tools to support the introduction of ontology-based applications. This decision might best be supported using benefit information on semantic technologies in the context of a concrete business case or application.

72

T. B€ urger et al.

In the following we provide a GQM template to grasp the problem at hand (Table 4.4) and analyze the suitability of ACTIVE cost-benefit models to support this scenario. Two models are appropriate to support this scenario. First, the ONTOBEN model which can be, as illustrated in (B€ urger et al. 2010), used to calculate savings based on the use of ontologies. Here the business case has to be analyzed, necessary functionalities have to be identified and the benefit of ontology-based applications to realize the use case at hand has to be highlighted. At the end, the model produces a quantitative figure reflecting potential savings. Second, the ONTOLOGY-UIS model can be used as a source of information on end user satisfaction which can be interpreted as an indicator of the efficiency of ontology-based applications (B€urger and Simperl 2008). To use this model, important features have to be identified and their performance has to be assessed. In order to provide decision support for this concrete scenario, benefit information from previous applications has to be gathered and used to argue for or against features for similar applications in the concrete business case based on analogy. Scenario 1.2 Development of Certain Features The purpose of this scenario is to provide arguments for or against the development or introduction of certain features in ontologies or ontology-based applications. The associated GQM template is illustrated in Table 4.5. Two models of the ACTIVE cost-benefit framework are appropriate to support this scenario. First, SEMACOM, which assesses costs of semantic applications. It can be used to produce estimates of the prospected costs necessary for the Table 4.4 GQM template for scenario 1.1 Object of study A concrete business case for which technological possibilities are being discussed Purpose To judge whether or not the use of ontologies or ontology-based applications makes sense in this case Focus To identify and highlight potential business benefits of using ontologies or ontology-based technologies in this case. This might be potential savings or positive user acceptance values Stakeholder A business case is typically discussed on a senior management level Context factors Factors which influence this scenario are the requirements of the business case, available development options, as well as restrictions in the company

Table 4.5 GQM template for scenario 1.2 Object of Study A concrete application feature that shall be part of a potentially new or existing ontology-based product Purpose To judge whether or not to implement a certain feature Focus The focus is on the identification of a potential business or end user benefit arising through this feature and to estimate costs needed to develop such features Stakeholder Senior management Context factors Factors which influence this scenario are the requirements of the business case, information on end user satisfaction of the current application and on the performance of similar features

4 Using Cost-Benefit Information in Ontology Engineering Projects

73

realization of a semantic application. Given that the granularity of the available historical data for SEMACOM is sufficient, analogies could be drawn to judge on (isolated) application features and to highlight their prospected costs and benefits. This, however, demands for the availability of historical project data which is ideally originated from the company in which the estimations should be made. Furthermore the ONTOLOGY-UIS model can be used as an indicator for the efficiency of similar features implemented in other applications as already indicated in the previous sections (B€ urger and Simperl 2008). Again, this assumes that historical project data is available. Scenario 1.3 Expressivity and Type of Knowledge Structure The goal of this scenario, which is further detailed in the GQM template available in Table 4.6, is to provide tools that are easy to use and understand in order to compare existing knowledge structures in terms of their prospected costs based on a number of predefined parameters such as size, distribution of the project team, or complexity of a domain. A number of ACTIVE cost-benefit models can be used to estimate the costs needed to develop an ontology (ONTOCOM) or a folksonomy (FOLCOM) and thus to support this scenario. Support for this scenario, of course, demands for the availability of calibrated cost models in order to be able to deliver the necessary quantitative data to judge for or against a specific type of knowledge structure. In addition, the ONTOLOGY-UIS model provides quantitative figures on the efficiency of applications based on the different types of knowledge structures used (B€ urger and Simperl 2008), which can be used as arguments to influence the decision at hand. To be able to apply ONTOLOGY-UIS reliably, historical data on perceived benefits of ontology-based applications, which make use of different types of knowledge structures, has to be available. Scenario 2.1 Effort Planning In the effort planning scenario, the project management team needs estimates on the needed effort to realize a project. This scenario, which is detailed in the GQM template in Table 4.7, can be supported using a number of ACTIVE cost models. All methods targeting various types of knowledge structures developed throughout ACTIVE are relevant for this scenario. In addition, SEMACOM can be applied to estimate the costs needed for the development of a semantic application. In order to use the models for that purpose, historical project data for the calibration of the models is assumed to be available. If this is the case, initial requirements for the Table 4.6 GQM template for scenario 1.3 Object of study A concrete business case in which the use of knowledge structures has already been decided and for which the type of the structure still needs to be discussed Purpose To judge which type of knowledge structure is more appropriate for the current business case Focus The focus here lies on influencing this decision based on cost benefit information Stakeholder Senior management Context factors Past experiences in using specific types of knowledge structures

74

T. B€ urger et al.

Table 4.7 GQM template for scenario 2.1 Object of study A concrete project which shall be implemented Purpose Estimate the effort required to develop the knowledge structure inside the project Focus The focus here lies on the costs of knowledge structures to be used Stakeholder Project management Context factors Application requirements, project team, domain, development environment (tool, distributiveness), etc

Table 4.8 GQM template for scenario 2.2 Object of study A concrete project which shall be implemented Purpose Estimate the length (and effort required) of development phases in the project plan Focus The focus here lies on splitting and distributing of the overall effort along distinct project phases Stakeholder Project management Context factors Concrete development methodology and information on distinct phases. Furthermore the application requirements of course influence the cost estimates and thus the splitting as well

ontology or ontology-based application can be used as input for the corresponding model to generate effort estimates. Scenario 2.2 Project Planning In the project planning scenario in Table 4.8 the project-management team would like to generate estimates for the overall development effort expected to be necessary for the development of an ontology, or ontology-based application. The estimates should be split according to the phases of the development life cycle. In order to realize this scenario, and to use the mentioned models for project planning, a number of pre-requisites have to hold. First of all, ONTOCOM and SEMACOM would have to be adapted to the concrete methodologies followed in the enterprise (Paslaru Bontas and Tempich 2005). More importantly, historical project data, which is typically needed for the calibration of models, has to be collected with a finer granularity than in (Paslaru Bontas et al. 2006) (Simperl et al. 2009b), which were concerned with effort estimates at the project level rather than at the level of individual life cycle phases. An alternative approach could be the distribution of the overall estimates, calculated using the existing models, across the phases, as it was done for the inclusion of ONTOCOM information in the gOntt tool (see Sect. 4.2). Scenario 2.3 Team Building Here the aim is to support staff assignment to project development teams. In order to realize this scenario ONTOCOM and SEMACOM can be used to generate estimates that can be adjusted based on different input factors such as team or tool experience. Based on these factors in concrete projects, optimal team member profiles can be determined that minimize/ maximize the effort needed to develop an ontology or ontology-based application. As usual, calibrated models have to be available to realize this scenario. If team members shall be assigned to distinct phases the calibration of the model should be

4 Using Cost-Benefit Information in Ontology Engineering Projects

75

adjusted accordingly, so values of the personnel-related cost drivers can be collected at the level of the individual phases. So far, data collection has been at the level of the overall project, and no lower-level information is taken into account (Table 4.9). Scenario 2.4 Tool Acquisition In the project planning phase a number of decisions have to be taken which influence the project environment later on. This includes the acquisition of tools that support one or more development phases. The aim of Scenario 2.4 is to be able to argue for or against the acquisition of specific tools based on empirical cost-benefit information (Table 4.10). Cost estimates generated with ONTOCOM are influenced by the prospected tool support, and thus allow to reason about the impact of certain type of tools on the estimated development effort. In order to provide statements on the performance and usefulness of concrete tools, the model has to be fed with more detailed data. Otherwise it can only provide information on the influence of well or not wellperforming tools on the effort needed to conduct the whole development project. Statements on specific tools are thus not possible. Besides gathering data on how well the development process was supported by specific tools, the names of the specific tools have to be collected as well. This information is not available in the data set described in (Simperl et al. 2009b). Scenario 2.5 Develop vs Buy vs Reuse Devising the most adequate engineering strategy is based on both technical and economic matters. Scenario 2.5 (Table 4.11) covers the latter. A model which has been tailored to support this type of scenarios is ONTOCOM-R which is an extension of the original ONTOCOM model towards ontology reuse (Simperl and B€ urger 2010). The ONTOCOM-LITE and the SEMACOM models, which account for the costs of taxonomies, and semantic applications, respectively, would have to be extended in a similar direction, paying proper account to the characteristics of the reuse Table 4.9 GQM template for scenario 2.23 Object of study A concrete project which shall be implemented Purpose Plan and optimize the allocation of team members to the project or distinct phases Focus The focus here lies on identifying optimal team member profiles in order to realize the project in a given time frame Stakeholder Project management Context factors Concrete development methodology and project requirements

Table 4.10 GQM template for scenario 2.4 Object of study A concrete project which shall be implemented Purpose To argue for or against the acquisition of a certain tool Focus Requirements of the to be developed ontology with respect to tools Stakeholder Project management Context factors Project requirements, previous experiences with tools

76

T. B€ urger et al.

Table 4.11 GQM template for scenario 2.5 Object of study A concrete (part of a) project which shall be implemented, e.g., an ontology module Purpose To assess whether to develop an ontology or a module thereof from scratch or to reuse existing components Focus The focus lies on the make vs. reuse decision for a concrete part of the ontology Stakeholder Project management Context factors Application requirements, definition of the ontology module, profile of potentially reusable modules or ontologies

process. In order to reliably use ONTOCOM-R in this scenario, there are a number of issues which would need to be tackled. First of all, a considerably higher amount of data on the potentially reusable ontologies has to be available. This would result in a better calibration of the REUSE cost driver, which accounts for the additional effort required to build ontologies which should be reusable in contexts other than the one they have been created for, and of all other cost drivers capturing aspects related to ontology engineering by reuse. Furthermore, an analysis of the reuse candidates with respect to the need to translate or align parts of the reusable ontology has to be performed. More information about the application of ONTOCOM-R is provided in (Simperl and B€ urger 2010). Scenario 3.1 Length of Development Cycles The purpose of Scenario 3.1 (Table 4.12) is to estimate the length of development cycles in an iterative project based on historical data. Such data could provide insights on the trade-offs between centralized, commonly agreed development, which represents a compromise view over the domain shared by all stakeholders, and localized, modified versions of the ontology, which have to be mediated through alignments. If the project is run in an agile fashion, then the scenario could be realized using the FOLCOM model, which is by design targeted at such environments. For the remaining models, a number of adjustments have to be made, triggered by the slightly different process model followed. In (Paslaru Bontas and Tempich 2005) we provide a detailed example of how such an adjustment could look like. Existing data and calibration results remain valid, as the individual iterations still match the core work breakdown structure underlying ONTOCOM. Scenario 3.2 Performance Assessment The purpose of Scenario 3.2 (Table 4.13) is to assess the performance of team members at specific points in time during the development of an ontology or ontology-based application. Both ONTOCOM and FOLCOM can be used for this purpose if data on the costs of development phases is gathered while the project is running. Within the FOLCOM model this requirement is fulfilled by design which means that the model is supposed to be used to estimate the effort needed for future iterations, which can then be compared to performance information that was monitored. For ONTOCOM one would have to carry out the adjustments discussed in the previous scenarios. Scenario 3.3 Revision Planning In order to plan a next development iteration, cost-benefit information might be useful as performance indicator. Thus it can be

4 Using Cost-Benefit Information in Ontology Engineering Projects

77

Table 4.12 GQM template for scenario 3.1 Object of study A currently running development project Purpose To estimate the length of development cycles based on historical data (from the same project) Focus The focus lies on an estimation of future project cycles at the beginning or in the middle of a running project Stakeholder Project management/ developers Context factors Application requirements, team performance indicators, completed project iterations

Table 4.13 GQM template for scenario 3.2 Object of study A currently running development project Purpose To assess the performance of team members Focus The focus lies on past and current development phases Stakeholder Project management/ developers Context factors Other projects currently running in the company might (negatively or positively) influence the performance of team members. This aspect is typically not assessable

considered as a valuable source for planning forthcoming iterations in development cycles of a project, which is the purpose of Scenario 3.3 (Table 4.14). To be used in this scenario, ONTOCOM would have to be adapted to an (iterative and collaborative) methodology (Paslaru Bontas and Tempich 2005). Furthermore, information on the reusability and integration effort needed to consolidate revisions, is required. On the other hand FOLCOM is by design usable for this purpose, as discussed earlier. Scenario 4.1 Extension Planning The purpose of Scenario 4.1 (Table 4.15) is to assess the feasibility of the integration of new features into the product (ontology or ontology-based application) using on cost-benefit information. To realize this scenario all models of the ONTOCOM framework, meaning ONTOCOM, ONTOCOM-LITE and SEMACOM can be used to estimate the costs of a planned extension, provided the planned extension is perceived as a new development including reuse of an existing ontology. ONTOLOGY-UIS can be used to assess the current performance and, based on that, can support decisions on whether new features are required, or would be beneficial for an application. In addition, it might provide cues on missing parts of the ontology, if configured accordingly. In order to use the model an appropriate survey infrastructure, including questionnaires and statistical techniques to analyze the results, has to be set up. Scenario 4.2 Replace vs Repair In this scenario project managers need to decide whether to replace or repair (parts of) an ontology or ontology-based application based on cost-benefit information (Table 4.16). This information is delivered by the ONTOCOM-R model, which ideally would be calibrated with enterprise-specific data on concrete ontology reuse practices in order to provide optimal results (Simperl and B€ urger 2010).

78

T. B€ urger et al.

Table 4.14 GQM template for scenario 3.3 Object of study A currently running development project Purpose To plan a next iteration in development cycles of a project Focus The focus lies on estimating the (optimal) length of revision cycles Stakeholder Project management, development team Context factors Team structure and distribution, initial size of the ontology, etc Table 4.15 GQM template for scenario 4.1 Object of study A completed product (ontology) Purpose To assess the feasibility of the integration of new features into the product (ontology or ontology-based application) Focus New features to be integrated Stakeholder Senior management, project management Context factors Performance of the application, available budget

Table 4.16 GQM template for scenario 4.2 Object of study A previously developed ontology or ontology-based application Purpose To decide whether to replace or to repair (parts of) an ontology or ontology-based application) Focus A broken (part of an) ontology or ontology-based application. Stakeholder Senior management, project management Context factors Existing budget, available ontologies, development team factors, etc

Scenario 4.3 Maintenance Planning Every of our models could be used to support this scenario if extended towards cost drivers specific to the maintenance activity. At the conceptual level this extension can be implemented in a straightforward manner, by introducing an addition cost driver accounting for the additional effort, but the challenge resides in acquiring the empirical data which would be necessary to re-calibrate the model (B€ urger et al. 2010). The GQM template for this scenario is depicted in Table 4.17. Scenario 4.4 (Dis-)continuation of Features During the use of a product, it might turn up, that a certain feature does not receive the necessary user support, or is not functioning as desired. The purpose of Scenario 4.4 is to assess the performance of such features during or after their development based on cost-benefit information (Table 4.18). The ONTOLOGY-UIS model assesses the performance of ontology-based applications in order to isolate the benefits that are generated by ontologies or particular features of an application. Given that the performance of specific features can be monitored in isolation, ONTOLOGY-UIS can be applied to decide about the (dis-)continuation of features. In order to so do, one would have to design the questionnaires necessary for the assessment of the performance of the application using the ontology and its features.

4 Using Cost-Benefit Information in Ontology Engineering Projects

79

Table 4.17 GQM template for scenario 4.3 Object of study Currently developed ontology or planned ontology Purpose To estimate the costs needed in the maintenance phase. Focus Costs occurring while the ontology/ ontology-based application is in use. Stakeholder Senior management, project management Context factors Underlying development requirements, maintenance team Table 4.18 GQM template for scenario 4.4 Object of study Ontology-based application Purpose To assess the performance of certain features during or after their development. Focus Particular application features which are based on an ontology. Stakeholder Senior management, project management Context factors User perception, influencing factors of the application

4.4

Methods and Tools for Cost/Benefit Driven Collaborative Knowledge Creation

In this section we introduce a number of tools to support the realization of the scenarios presented in Sect. 4.3. The tools target all stakeholders in the life cycle of collaboratively developed ontologies and ontology-based applications.

4.4.1

Cost Estimation of Ontology Development

We have developed a tool which can be used to run the ONTOCOM estimation process, and the calibration of the model using (company-internal) data. The tool provides an easy-to-use user interface for running calibrations and predictions (Fig. 4.1). The calibration can utilize the existing data set of 148 data points, selfowned data, or a combination of both. Furthermore, users are able to customize the model, selecting the cost drivers to be taken into account for the calibration or adding new cost drivers. The latter is relevant, for instance, in scenarios explicitly targeting iterative engineering. Once the model is calibrated, project managers and engineers can use the model to calculate effort estimates. To do so, they have to indicate the rating levels of the cost drivers which best fit the project circumstances and provide an estimate of the size of the ontology (Fig. 4.2). The rating levels are associated with numerical, calibrated values, which serve as input to the ONTOCOM formula. The result is expressed in person-months. The tool can support scenarios 1.3, 2.1, 2.3, 2.4, and 4.1.

4.4.2

Planning of Ontology Development

gOntt is a project planning tool for ontology-development projects inspired by software-engineering tools such as Microsoft Project (Gomez-Perez et al. 2009)

80

T. B€ urger et al.

Fig. 4.1 The ONTOCOM main user interface of the ONTOCOM tool

(http://www.neon-toolkit.org/wiki/Gontt). We are extending it into cost information in order to facilitate the realization of scenario 2.2, using the results of ONTOCOM for planning and scheduling purposes. In order to integrate the two approaches in a sound manner, one has to take into account several key aspects related to the parametric approach adopted by ONTOCOM (and related models in other areas) to estimate development efforts. First, such models require a critical mass of empirical data for calibration purposes, which inherently reduces the number of ontologyengineering activities covered by the NeOn methodology (Suarez-Figueroa et al. 2007) – which gOntt relies upon – for which accurate estimates can be calculated. Second, refining the cost model to deliver estimates at a more fine granular level would ask for the definition of various sub-models covering a specific, potentially complex ontology engineering activity; examples of such models include a model estimating the costs of ontology reuse, a model explicitly targeting the costs of ontology evaluation, and many more. All these models, provided the availability of historical project data, could then be applied to produce estimates for specific phases of the life cycle model followed. However, they would be rather focused and restricted in application, and, for certain activities (such as domain analysis) would very likely require deeper insights into the practices that are actually in place

4 Using Cost-Benefit Information in Ontology Engineering Projects

81

Fig. 4.2 Cost prediction user interface

at the enterprise using the corresponding model. Therefore, we opted for a slightly different strategy, which overcomes these issues. In a nutshell, ONTOCOM (in its altered version resulting from the alignment between the NeOn methodology and its current cost drivers) can be used to predict the total cost of an ontology engineering project; the project manager subsequently devises a distribution function by which this estimate is broken down to the individual phases of the project, based on her expertise and on existing insights from case studies in ontology engineering literature. The simplest form of this distribution function is based on percentages, which are then taken into account to calculate cost estimates per phase or even activity. A mock-up is depicted in Fig. 4.3 below. When aligning ONTOCOM cost drivers to the NeOn methodology we identified a series of issues related to the definition of the former, which will result in a new release of the cost model: – The need for a more detailed account of project management costs, covering NeOn activities such as feasibility study, scheduling and configuration management. – The need for ontology location support as part of our ontology reuse cost drivers group. This will be implemented as a new cost driver as well.

82

T. B€ urger et al.

Fig. 4.3 gOntt extension for ONTOCOM

– Discrepancies in the level of granularity of certain cost drivers, in particular ontology modification and ontology translation. These should be merged in a next version of the model. – Methodologically sub-optimal support for knowledge reuse, which includes all aspects related to leveraging non-ontological resources in an ontology engineering project.

4 Using Cost-Benefit Information in Ontology Engineering Projects

4.4.3

83

Decision Support for Choosing Appropriate Knowledge Structures

Another envisioned tool combines ONTOCOM, ONTOCOM-LITE and FOLCOM into one application so as to support senior and project management in the task of choosing an appropriate knowledge structure based on the estimated size and prospected costs (see Scenario 1.3). A sketch of the knowledge structure comparison tool is presented in Fig. 4.4. Essentially, the tool displays the cost development of different knowledge structures based on their size. This graphical view should be generated from the data sets of the corresponding cost benefit models, making knowledge structures comparable in terms of the costs associated with their development, as a function of their size. In addition, a filtering mechanism could be offered, allowing potential users to select if the knowledge structures in the data set are based on reuse or developed collaboratively from scratch, and how this influences the costs as outlined in Sect. 4.2.

4.4.4

Budgeting Ontology-Development Projects

In order to assist the management in estimating the costs required for the development of a knowledge structure, and in choosing the most suitable staff and support tools, we envision a budgeting application which displays the results of, for instance, ONTOCOM in different phases of the ontology-development project. The budgeting tool could be adjusted along various parameters; the idea is that potential users should provide parameters of their planned development projects, and the tool should then generate estimates for the expected costs in different development phases. Basically, users should indicate the type of knowledge structure and the estimated size which serves as a minimal input to the tool. Users should

Fig. 4.4 Knowledge structure comparison tool

84

T. B€ urger et al.

Fig. 4.5 Budgeting tool

be able to indicate if a planned knowledge structure shall be developed based on reuse or developed collaboratively. Furthermore the tool is supposed to provide support for balancing the prospected efforts by adjusting several parameters, including team or tool parameters. A possible screenshot of such a tool is depicted in Fig. 4.5. The tool should furthermore indicate how an optimal profile of a team member in each phase should look like and which tools are suggested for the implementation of the planned knowledge structure. This functionality, supporting scenarios 2.1–2.5 could be integrated into gOntt.

4.4.5

Decision Support for Ontology Reuse

As previously motivated, the reuse of ontologies has always been a lively discussed problem in ontology-engineering community, and bears technical, as well as organizational challenges. A core decision to be taken in the planning phase of many ontologyrelated projects is whether to develop an ontology from scratch or to foster reuse of existing ontologies. This decision is often taken on economic premises, considering the cost savings achieved by reuse and/or the prospected benefits of the two strategies. A tool to support such decisions could look like the one displayed in Fig. 4.6. At the bottom of the interface the user is supposed to insert the estimated size of the ontology to be developed (manually or via reuse). Furthermore, she has to indicate a breakdown of the total size in translated, modified, or aligned ontology elements, as these operations are associated to a a different amount of effort. ONTOCOM-R assesses the benefit of a reuse-driven strategy based on these inputs, which is relevant for scenarios 2.5 and 4.2.

4 Using Cost-Benefit Information in Ontology Engineering Projects

85

Fig. 4.6 ONTOCOM-R reuse decision tool

4.4.6

Tagging Efficiency Monitoring

FOLCOM is a model to estimate tagging costs based on the principles of storypoints (Simperl et al. 2010). Information on the performance of the development team is interesting for project management in order to adjust the team if the performance is not satisfying. FOLCOM produces time estimates in an iterative way, in other words it calculates an estimate for the next project iteration given data gathered from previous iterations. A screenshot of the tool monitoring the performance of a team based on FOLCOM is shown in Fig. 4.7. The tool targets scenario 3.2. It is Web-based and measures the time to tag selected resources by users. Efficiency measurements are also required to calibrate the model, as by design the estimation model calculates the effort associated with the remainder of a project based on the actual effort spent so far. In a nutshell the tool shows an excerpt of an information resource (PDF documents, but also images and videos) from a specific collection and asks users to tag it.3 Depending on the selected tagging mode, it is possible to add free tags, as well as tags from a controlled vocabulary, and tags recommended by the tool according to some heuristics. Deletion of tags is also supported.

3

FOLCOM calculates the time required to tag the entire collection.

86

T. B€ urger et al.

Fig. 4.7 Tagging efficiency monitor

4.4.7

Performance and User Satisfaction Assessment

Assessing the performance of an application or a feature of it, can provide valuable hints on the (dis-)continuation of the development or the introduction of certain features. As illustrated in Sect. 4.3, the ONTOLOGY-UIS model can be used to assess user satisfaction of features of an application and by that make a statement about the performance of the application. The outcome of the method can be visualized in a so-called snake diagram where one can see the gaps between the expectation of the users vs the actual performance of the application. This is an indicator of the efficiency of certain application features (B€urger and Simperl 2008). A mock-up interface of the tool is depicted in Fig. 4.8. It is relevant for scenarios 1.1, 1.2, 4.1, and 4.4.

4.4.8

Organizational Impact Evaluation

The Organizational Impact Evaluation Tool (OIET) addresses the impact of semantic applications at an organizational level. Being deployed in Pillar 5 of EVEKS framework, it analyzes the corporate structure based on user ratings (Imtiaz et al.

4 Using Cost-Benefit Information in Ontology Engineering Projects

87

Fig. 4.8 Performance and UIS meter (based on [Remenyi et al. 2001])

2009; Imtiaz et al. 2008). The output of the OIET can be used as an input for costbenefit models, in particular in scenarios 1.1 and 1.2. The procedure to apply the OIET is supposed to be as follows (Fig. 4.9): First, organization parameters of measurement are set by higher management. Afterwards questionnaires will automatically be generated based on the first step, refining the scope of the investigation. These questionnaires have to be answered by employees of the company. The output of this activity is a cross-match of variables and questions for every employee. Based on that, an overall matrix can be aggregated showing the company-wide perceived structure and satisfaction of a particular information system. This leads to an assessment of the three key parameters collaboration, knowledge and technology with respect to their impact of variables such as dumb nodes,4 active nodes,5 and external nodes (Imtiaz et al. 2009; Imtiaz et al. 2008).6 Based on these findings, information systems can be evaluated in terms of their company-wide benefit.

4 Dumb nodes are non-specialists which are information/data pushers. These roles may be incorporated into enterprise information systems. 5 Active nodes are specialists that define the process dynamics and can only have an interface to enterprise knowledge portals. 6 External nodes are specialists on a sub-process level. They should therefore be considered while designing enterprise information systems.

88

T. B€ urger et al.

Fig. 4.9 Organizational impact evaluation

Table 4.19 Models and tools supporting the different scenarios Scenarios Models Tools 1.1, 1.2 – OIET 1.1, 1.2, 4.1, 4.4 ONTOLOGY-UIS Performance and UIS meter 1.3 ONTOCOM, ONTOCOMKnowledge structure comparison tool LITE, FOLCOM 1.3, 2.1, 2.3, 2.4, 4.1 ONTOCOM ONTOCOM Tool/Cost prediction user interface 2.1, 2.2,2.3, 2.4, 2.5 ONTOCOM Budgeting tool, gOntt Extension for ONTOCOM 2.2 ONTOCOM gOntt Extension for ONTOCOM 2.5, 4.2 ONTOCOM-R ONTOCOM-R Reuse decision tool 3.1 FOLCOM – 3.2 FOLCOM Tagging efficiency monitor 3.3 FOLCOM, altered version – of ONTOCOM 4.3 Any –

Thus, OIET provides an overall impact at organizational level by describing such an impact in terms of different variables which can explain the ultimate benefits in adopting such technologies for organizations. B€urger et al. (2010) explains in detail the steps which have to be performed in order to apply the tool. At a later stage, its output can help the company to analyze the proper balance for the parameters in cost-benefit models. In table 4.19 we summarize which scenarios (as presented in Sect. 4.3) are supported by the different models and tools.

4.5

Conclusions and Outlook

Industry is starting to acknowledge the technical value of ontologies for enterprises. In the last years early adopters have been increasingly using them in various application settings ranging from content management to enterprise application

4 Using Cost-Benefit Information in Ontology Engineering Projects

89

integration. The main technological building blocks are meanwhile available from established vendors. Despite this promising position, the economic side of their development, maintenance and usage are still not an integral part of ontologyengineering projects. In this chapter we analyzed how cost-benefit information delivered by models such as ONTOCOM, FOLCOM and ONTOLOGY-UIS can be used at various stage of the ontology life cycle by management and technical staff. Some of the scenarios we identified demand for additional empirical data, either with respect to volume – in order to cover cost drivers which have been neglected by the data sets currently used for calibration purposes – or with respect to granularity – to allow for predictions at the phase, rather than project level. Most notably, the former demands for the availability of reliable data on ontology maintenance projects, and on reuse of ontologies or other similar knowledge structures. While such data could not be collected in the past – mainly as a consequence of the evolution of the Semantic Web area – the raise of data-driven approaches in the context of the Linked Open Data initiative may quickly change this state-of-affairs, even if it also may require a re-definition of the existing notion of reuse and the methodologies therefor. The need for adjustments to provide better coverage of the reuse topic has also been acknowledged when aligning ONTOCOM with the NeOn methodology, nevertheless only at the conceptual level – the question of data availability seems to be realistically accessible only in close relation with developments around the LOD cloud. Acknowledgements The research leading to this paper was partially supported by the European Commission under the contract FP7-215040 “ACTIVE”.

References Berners-Lee T, Hendler J, Lassila O (2001) The semantic web. Sci Am 284(5):34–43 B€urger T, Simperl E (2008) Measuring the benefits of ontologies. In OTM ’08: proceedings of the OTM confederated international workshops and posters on on the move to meaningful internet systems, pp 584–594. Springer B€urger T, Popov I, Simperl E, Hofer C, Imtiaz A, Krenge J (2010) Calibrated predictive model for costs and benefits. Deliverable D4.1.2, ACTIVE Cooke N (1994) Varieties of knowledge elicitation techniques. Int J Hum Comput Stud 41: 801–849 Davis J, Fensel D, van Harmelen F (eds) (2003) Towards the semantic web: ontology-driven knowledge management. Wiley, The Atrium, Southern Gate, Chichester, West Sussex Ebert C, Dumke R (2007) Software measurement: establish – extract – evaluate – execute. Springer, Berlin Ebert C, Dumke M, Schmietendorf A (2005) Best practices in software measurement. Springer, New York Fensel D (2001) Ontologies: a silver bullet for knowledge management and electronic commerce. Springer Verlag, Berlin Gomez-Perez A, Suarez-Figueroa M-C, Vigo M (2009) Gontt: a tool for scheduling ontology development projects. In Proceedings of the fifth international conference on knowledge capture, ACM, New York

90

T. B€ urger et al.

Hepp M, De Leenheer P, de Moor A, Sure Y (eds) (2008) Ontology management: semantic web, semantic web services, and business applications (semantic web and beyond). Springer, New York. Imtiaz A, Giernalczyk A, Davies J, Thurlow I (2008) Cost, benefit engineering for collaborative knowledge creation within knowledge workpspaces. In Proceedings of EChallenges 2008. Imtiaz A, Giernalczyk A, B€ urger T, Popov I (2009) A predictive framework for value engineering within collaborative knowledge workspaces. In Proceedings of EChallenges 2009. McGuinness DL (2003) Ontologies come of age. In Fensel D, Hendler J, Lieberman H, Wahlster C, (eds) Spinning the semantic web: bringing the world wide web to its full potential. MIT Press, Cambridge Paslaru Bontas Simperl E, Tempich C, Sure Y (2006) Ontocom: a cost estimation model for ontology engineering. In Proceedings of the 5th International Semantic Web Conference ISWC2006. Paslaru Bontas E, Tempich C (2005) How much does it cost? Applying ONTOCOM to DILIGENT. Technical Report TR-B-05-20, Free University of Berlin Popov I, B€urger T, Simperl E, Imtiaz A (2009) Preliminary predictive model for costs and benefits. Deliverable D4.1.1, ACTIVE. Remenyi D, Money A, Sherwood-Smith M, Irani Z (2001) The effective measurement and management of IT costs and benefits Simperl E, B€urger T (2010) H. Jin, Z. Lv (editors): data management in semantic web, chapter Ontology Reuse – Is it Feasible? Nova Science Publishers, Inc. (to be published) Simperl E, Mochol M, B€ urger T, Popov I (2009a) Achieving maturity: the state of practice in ontology engineering in 2009. In Proceedings of Ontologies, DataBases, and Applications of Semantics for Large Scale Information Systems (ODBASE’09). Simperl E, Popov I, B€ urger T (2009b) ONTOCOM Revisited: towards accurate cost predictions for ontology development projects. In Proceedings of the 6th European Semantic Web Conference (ESWC 2009), pp 248–262 Simperl EPB, B€urger T, Hofer C (2010) Folcom or the costs of tagging. In Proceedings of the 17th international conference on Knowledge Engineering and Management by the Masses (EKAW2010), pp 163–177 Suarez-Figueroa M, de Cea GA, Buil C, Caracciolo C, Dzbor M, Gomez-Perez A, Herrrero G, Lewen H, Montiel-Ponsoda E, Presutti V (2007) Neon development process and ontology life cycle. NeOn deliverable 5.3.1, NeOn

5

Managing and Understanding Context Igor Dolinsˇek, Marko Grobelnik, and Dunja Mladenicˇ

5.1

User’s Working Contexts in Knowledge Workspace

Some may say that the word context is rather broad and people may have difficulties understanding the specific interpretation one is using when talking about context. On the other hand, we were not able to find a more suitable replacement for this word, so we stayed with context. To overcome the confusion we will initially spend some time to describe our usage of the word context. Our focus is on knowledge workers and on their daily work with computer systems. More specifically, we are most interested in their knowledge processes. From our perspective, knowledge workers are conducting knowledge processes by using software tools like MS Office, Internet Explorer, Windows File Explorer, CRM and ERP tools, Wikis, blogging tools, chatting tools etc. While using the tools they are accessing information from all kind of sources like MS Word documents, MS Outlook messages, Web pages etc. We will refer to them as information resources. Furthermore, knowledge processes are performed to achieve some personal or business goal. Often it happens that several people are involved in jointly achieving a business goal or working on the same assignment. Furthermore, the same knowledge process is often executed by the same person with different information resources and in collaboration with different people to achieve different goals. The proposed framework thus needs to be able to support such settings. Our assumption is that grouping people, information resources and knowledge processes needed to achieve a specific goal or perform a specific assignment, may simplify the knowledge worker’s interaction with the computer system and their

I. Dolinsˇek (*) ComTrade d.o.o., Litijska 51, Ljubljana 1000, Slovenia e-mail: [email protected] M. Grobelnik • D. Mladenicˇ Artificial Intelligence Laboratory, Jozef Stefan Institute, Jamova 39, Ljubljana SI-1000, Slovenia e-mail: [email protected]; [email protected] P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5_5, # Springer-Verlag Berlin Heidelberg 2011

91

92

I. Dolinsˇek et al.

collaboration with others who are working on the same assignment. This grouping is organized through the concept of context. A person or a group of collaborators defines a context for a particular goal they would like to achieve or assignment they would like to perform. Whenever they are performing some computing activities which are related to that goal or assignment we say that ‘they are working in that specific context.’ While working in that specific context all relevant information resources (emails, documents, web pages etc.) and knowledge processes are linked to that context. This makes the later information retrieval and repeated executions easier because the users can navigate through the system by using the high level concept of context rather than the detailed level of individual information resources. The assumption is that such abstraction is closer to the usual thinking process. As a consequence, the working context can be used also to filter the information which is presented to the user by the software tools to reduce the information overload. The actual interpretation of the context is left to the users. For example, for a patent lawyer a context could be a particular patent application he is working on together with the patent inventors. For a sales person this could be a specific proposal she is preparing in response to the request for proposal from the client. Note that proposal preparation can be a lengthy and quite complex undertaking where several coworkers are involved and a number of knowledge processes like meeting organization and proposal review need to be performed. For a researcher a context can be a project he is working on together with a team of co-workers. Large projects can be further structured and therefore corresponding context can consist of several sub-contexts. For example, work on the ACTIVE project could have ACTIVE.planning, ACTIVE.development, ACTIVE.testing, ACTIVE.reporting, ACTIVE.meeting and ACTIVE.dissemination sub-contexts to group people, resources and knowledge processes in a more fine-grained way. In short, in our sense a context is a collection of information resources, processes and people which a knowledge worker finds it convenient to group together in order to be able carry out his or her work more effectively.

5.1.1

Non-Observed Versus Observed User’s Activities

In order to manage and understand user context in computer environments we need to conduct some form of user observation. For example, we need to keep track of various information resources the user has been reading or modifying, of mail messages he has been exchanging with others, etc. This is the price we have to pay to gain the benefits of better search and reduced information overload. We are aware of the fact that this may raise privacy concerns. Nevertheless, in an enterprise environments user’s activities are being observed already by systems management and data protection tools. We have to ensure that the user activity observation process maintains the same level of privacy protection as is maintained by the

5 Managing and Understanding Context

93

data protection and systems management processes which are already deployed in the enterprise.

5.1.2

Observation Methods

For useful context management more data has to be collected about the user’s activities than is normally available from off-the-shelf office tools. In addition, relations between the people and the resources they are using have to be recorded in a similar way as already done by e-mail and messaging tools. For our purposes a set of primitive events has been defined to model the most fine-grained user activities we are interested in. Examples of primitive events are • User has accessed a particular web page • User has sent an email message with particular subject, content and attachments to the specified list of recipients • User has started/stopped a particular program • User updated a particular Word file Each primitive event includes the relevant data that was involved in the event. For example, the ‘user updated a particular Word file’ event includes the before and after image of the Word document. Another example is email-related events that carry the subject, mail content and attachments. On the other hand, we are not interested in low-level user’s activities like mouse clicks, windows selections, etc.

5.2

Knowledge Workspace

We believe that existing software tools in a typical MS Windows/MS Office setup are not providing adequate support to deal with knowledge processes. Currently, knowledge workers can deal with information on the individual document or file folder level and interact with others on individual email message or chatting message level. On the other hand the knowledge that links the relevant people, activities, files and email messages in respective folders to the specific goal is implicit and often exists only in the person’s mind. For the most frequently used and well-defined business processes (like a typical sales cycle), specialized software tools have been developed to link the necessary process elements and resources together. However, for the support of informal and dynamic knowledge processes there are very few suitable software tools available. For example, with the Unified Activity Management project (Moran et al. 2005) IBM has developed a set of specialized tools to cope with generic knowledge processes and collaboration. On the other hand some European research projects such as:

I. Dolinsˇek et al.

94

• Nepomuk (http://nepomuk.semanticdesktop.org/) and • Gnowsis (http://gnowsis.opendfki.de/) have approached this field from the semantic desktop perspective. The knowledge workspace we are proposing (called the ACTIVE knowledge workspace – AKWS) is a software prototype which we have developed in the ACTIVE project. Our approach to building a collaborative knowledge process management platform differs from the existing approaches taken by the formerly mentioned projects. The main guideline for developing this prototype was that it should extend the existing Microsoft Windows platform and MS Office tools with proposed concepts as much as possible. While context, knowledge process and resource meta-data support are provided in the newly developed platform, they are to a large extent delivered to the users through extensions to popular enterprise office automation tools like Windows File Explorer, Internet Explorer and other MS Office tools. The proposed knowledge workspace is architected as a set of cooperative services, dealing with contexts, knowledge processes, resource’s meta-data and other web platform-specific infrastructure and as a set of plug-ins for popular programs in use in the enterprise environment. Workspace services reside in the enterprise intranet and plug-ins extend the existing software on user’s desktops. In the scope of the ACTIVE project, plug-ins were developed for the following software products: • • • • • • • • • •

Windows File Explorer Microsoft Internet Explorer MS Outlook 2007 MS Excel 2007 MS PowerPoint 2007 MS Word 2007 Semantic Media Wiki LiveNetLife LiveOfficeLife. miKrow

We will refer to them as ACTIVated applications. In addition, the ACTIVE Taskbar tool provides access to the ACTIVE services from the desktop and the ACTIVE portal provides web access to the services. A trial version of the ACTIVE knowledge workspace software prototype is available for download for research purposes at http://www.active-project.eu.1

1

As at January 2011.

5 Managing and Understanding Context

5.3

95

Context Support in the ACTIVE Knowledge Workspace

There are two perspectives for dealing with contexts in the AKWS. The top-down perspective allows users to name and define contexts explicitly on an as-needed basis. The bottom-up perspective relies instead on the observation of the user’s computing activities where by using computer intelligence techniques AKWS services infer the various contexts the user is working in.

5.3.1

Defining Contexts and Context Switching

In the proposed knowledge workspace, context is represented as a workspace resource which can be defined and shared by the users. Context is subject to Workspace access policies in the same way as any other Workspace resource. When a user starts working on a new assignment a context with a suitable name is created in the Workspace by the user. In the case that this work will require collaboration with other people in the enterprise, they can be assigned to this context, too. AKWS provides the means to see all contexts which are assigned to the user and gives the user a possibility to switch between them explicitly, these features being provided by the ACTIVE Taskbar. The screenshot in Fig. 5.1 shows the user’s ACTIVE Taskbar at the moment when this user is working in the ACTIVE.meetings context and is about to switch the context to ACTIVE.reporting. The Taskbar context menu shows a list of assigned contexts for this user: AMRoffer and ACTIVE which is further structured into sub-contexts ACTIVE. planning, ACTIVE.development, ACTIVE.testing, ACTIVE.meetings and ACTIVE.reporting. This way the user explicitly controls in which context he/she is working. Other ACTIVated applications the user is running on this desktop are automatically aware of the current context.

5.3.2

Associating Information Resources

All ACTIVated applications provide a way to associate the data they operate on with the current context. This can be done either explicitly by the user via the ‘associate’ button or implicitly whenever the data is accessed by the ACTIVated program. The screenshot in Fig. 5.2 shows a part of the ACTIVated MS PowerPoint ribbon where explicit association of the current PowerPoint document ‘activeknowledge-workspace-session-v1’ with the current context ‘ACTIVE.meetings’ can be performed simply by clicking on the ‘Associate’ button. Similarly an e-mail can be associated with the context in MS Outlook, a spreadsheet in MS Excel, an URL in Internet Explorer and text documents in MS Word. An arbitrary file in Windows can be associated with the context by using the ACTIVE Shell extension menu option as it is shown on the screenshot in Fig. 5.3.

I. Dolinsˇek et al.

96

Fig. 5.1 Context switch in ACTIVE taskbar

Fig. 5.2 Associating a PowerPoint presentation to the working context

Here the user will insert the selected Excel spreadsheet ‘server_mem’ into the workspace and associate it with the current working context ACTIVE.meetings.

5.3.3

Associating People

People can be assigned to a context by using the team context management feature of the ACTIVE portal as it is shown on the screenshot in Fig. 5.4:

5 Managing and Understanding Context

Fig. 5.3 Associate a windows file with the context

Fig. 5.4 Assigning people to the context

97

I. Dolinsˇek et al.

98

Here user Carlos will be assigned to the ACTIVE.meetings context to which Igor, Ian, Paul and John are already assigned. Once a person is assigned to a context, this context will become available through the context selection list in that person’s ACTIVE Taskbar.

5.3.4

Associating Knowledge Processes

Similarly the existing knowledge processes Trip arrangement and Venue arrangement can be associated with the context by using the TaskPane of the ACTIVE Taskbar as shown by the screenshot in Fig. 5.5. Here two knowledge processes (Trip arrangements and Venue arrangements) are already associated with the context ACTIVE.meeting and the user can associate more of the predefined knowledge processes by importing them from the knowledge process store or from a file.

5.3.5

Viewing and Searching Through the Context Perspective

Through various features of the ACTIVE Taskbar the user is given insight into the content of the current context. Screenshot in Fig. 5.6 shows the ACTIVE.meeting context together with the list of people currently working in that context and a list of people who are also assigned to the context but are working in some other context right now. On user request, a list of all information resources which are associated

Fig. 5.5 Associate knowledge processes to the context

5 Managing and Understanding Context

99

Fig. 5.6 Viewing workspace resources of a working context

with the current context is displayed in the ‘Resources in current context’ form and the TaskPane shows the currently associated knowledge processes. Alternatively the context can be visualized as is shown on the screenshot in Fig. 5.7. The associated context resource in question can be directly accessed or manipulated from the respective list (a document can be opened by the appropriate program, user can be contacted via mail or chat, etc.). Similarly the resource’s meta-data as provided by the Workspace can be displayed. The context name can be used to search for associated resources by using the search option of the ACTIVE Taskbar. This can help to formulate searches in situations like this: ‘I remember this data was presented in a PowerPoint slide which we prepared in scope of the ILM offer for Nasa.’ A quick look at the context cloud in the Workspace shows that there is a context named ‘Nasa ILM offer’ so a context-restricted search can be made with further restriction to the PowerPoint documents and we are presented with all potentially relevant PowerPoint slides. One can argue that the same effect can be achieved when all team members are using the same conventions for naming the directories where the documents are stored or the same set of characteristic keywords embedded in the documents. In that case standard desktop search facilities could be used for easier retrieval. However, in that case we are relying on people always following the same pattern of manual activities, not to mention the problem of consistently using the agreed markup names. In addition, the team leader has to use conventional communication tools to inform the others about the conventions. With the context concept in place

100

I. Dolinsˇek et al.

Fig. 5.7 Viewing context resources in context visualizer

and with ACTIVE Taskbar being used by all team members this is already well defined and instantly visible to all team members. Furthermore, with automatic associations in place the ‘markup’ is also resilient to sloppy users. The only thing expected from them is to accurately set their working context. But as will be shown later in this chapter, the Workspace will also assist the user in setting the appropriate working context. The currently selected context is used to filter the data presentation in various applications in the AKWS. For example, all Office tools have a new ‘Start button’ menu option ‘Open from context’ where the user can open a new document only among the documents which are associated with the current context as shown on the screenshot in Fig. 5.8. Similarly a context filtering button is available in Outlook so that only mail messages associated with the current context are displayed in the selected Outlook message folder list. On the screenshot in Fig. 5.9 only two emails, associated with the context ACTIVE.meetings are displayed in the Inbox because the context filter was applied by the user by pressing on the ACTIVE.meetings button in the ACTIVE toolbar in Outlook.

5 Managing and Understanding Context

Fig. 5.8 Context filtering at document open

Fig. 5.9 Context filtering of mail messages

101

I. Dolinsˇek et al.

102

5.4

Context Discovery

So far the top-down perspective of context management was described where contexts are named, defined and switched explicitly by the users. However, we are dealing with contexts also from the bottom-up perspective. User observation methods which are in place in all ACTIVated applications are recording a number of primitive events. These streams of events are collected by the proposed ACTIVE knowledge workspace context mining services. The machine learning technology built into those services analyses the content of the documents, web pages and email messages the users are working on. The goal is to identify the clusters of information resources, collaborators and tasks which the users may recognize as their context. The algorithms which are used for this purpose are described in detail in Chap. 7: Machine learning techniques for understanding context and process. The results of the context mining process are discovered contexts in the ACTIVE knowledge workspace. Discovered contexts are not named, but they are characterized by a set of keywords which were suggested by the mining algorithms as the most relevant representation of the context. In addition to the representative keywords also the list of relevant information resources, collaborators and tasks are determined by the mining software and associated with the discovered context. The workspace user has the option of reviewing the list of currently discovered contexts and then based on his judgment he can convert the discovered context into a top-down context by giving it a name which is most meaningful to him. Screenshot in Fig. 5.10 shows the current list of discovered contexts for one Workspace user and detailed content of a discovered context with keywords SKIING, HOLIDAY, AMADE, AUSTRIA, SNOW, etc.

Fig. 5.10 List of discovered contexts

5 Managing and Understanding Context

103

Fig. 5.11 Bulk association of discovered resources

Since this was a result of a personal investigation for various skiing conditions in Austria, only one user was discovered for this context and all discovered resources are links to popular skiing and travel web-sites. The user can decide and define a name for this discovered context; for example ‘Austria-ski’ by selecting the ‘Name Context’ button on the form and can then select the most relevant URLs he was using during his search and automatically associate them with the newly named context as shown on the screenshot in Fig. 5.11.

5.5

Context Detection

As described above, the context mining service discovers emergent contexts in the incoming stream of primitive events. In addition it is trying to figure out the current working context of a user. This process is called context detection and is used by the user as an aid to automatically set the working context. Note that the user can set his current working context explicitly through the ACTIVE Taskbar. However, this setting might be inaccurate because the user forgets to switch the context when he starts working on something else. Since the knowledge workspace software maintains explicit associations between the information resources and the named contexts it is possible to automatically verify if the current working context matches the context which is deduced from the information resource, currently processed by

I. Dolinsˇek et al.

104

Fig. 5.12 Working context suggestions

the user. In case of a mismatch a notification is displayed on the ACTIVE Taskbar suggesting to the user to switch to one of the suggested contexts. Then it is up to the user to either switch context as suggested or continue with the current setting. Screenshot in Fig. 5.12 shows a context detection notification which can be then followed by the context switch. In this example user was working in the ‘rails_discussion’ context but then started to browse a Sport magazine website. However, some time ago he has associated that Web site to two of his contexts, skiing and golf. Therefore the Workspace sent him a suggestion that he may not be working in the most relevant context (this could not be seen on the screenshot) and suggested him to switch to either skiing or golf context which were directly associated with the Sport magazine web site. But the final decision to switch the context is left to the user.

5.6

User-Guided Discovery and Detection

The final judgment of the quality of context discovery and detection is always left to the user. The ACTIVE knowledge workspace includes communication dialogues where the user can review the currently discovered contexts and provide feedback to the mining service about the quality of the discovered contexts. In a case where

5 Managing and Understanding Context

105

the discovered context does not represent a meaningful context for the user, the service can be instructed to discard that context. In some situations the discovered context is actually similar to an existing named context but the mining algorithms failed to recognize it. In such situation it is possible to manually merge the discovered context with an existing context. Similarly the context detection is used to provide context switch suggestions instead of automatically switching the working context for the user. The actual user’s decision to switch the context to the one suggested by the system, can be used by the mining to refine the context detection process.

5.7

Discussion

There are several Business Process Management (BPM) and Enterprise 2.0 tools on the market and many attempt to assist in the collaboration between knowledge workers by using the project concept, like for example Basecamp (http:// basecamphq.com/2) and @task (http://www.attask.com/3). At first glance it seems that the concept of working context which is used in the ACTIVE knowledge workspace is actually the same as project in other tools. Indeed, the ACTIVE context has several features that are common to the project concept in other tools. For example, project is often used to group people, well-defined business process (es) and information resources in similar ways as the context groups people, information resources and informal knowledge processes. However, the inclusion of various information resources in BPM tools is often limited to emails and documents. Furthermore, they are often attached to the project as supplementary information to the underlying BPM data structures and their relation to the project can be used only within the BPM tool itself. In AKWS the context is maintained by the Workspace but can also be incorporated into other tools. A set of Workspace web services makes it possible to deal with contexts and their relations to other Workspace entities in any software tool. When working with project-centric tools it is often the case that the users can think and work in terms of project concept only inside of the project management tool. When they start using other tools they are again forced to think and work on the level of individual documents and rely more on the implicit relations between the documents and projects which they have to remember. With the open structure of the AKWS we can align more software tools around the working context and simplify daily operations for knowledge workers. With closer observation of users’ activities during their interaction with the most commonly used office automation software tools, the Workspace can help the users

2 3

As at February 2011. As at February 2011.

106

I. Dolinsˇek et al.

to easily determine their current working context. Once the appropriate context is identified it can be used for filtering and prioritization of the information, knowledge processes and collaborators which are delivered to the users through the tools. This makes it easier for the knowledge workers to stay focused on their work at hand.

References Moran TP, Cozzi A, Farrell SP (2005) Unified activity management: supporting people in e-business. Commun ACM 48(12):67–70, http://www.almaden.ibm.com/cs/projects/uam/

6

Managing, Sharing and Optimising Informal Knowledge Processes Jose´-Manuel Go´mez-Pe´rez, Carlos Ruiz, and Frank Dengler

6.1

Introduction

Knowledge workers are central to determine an organization’s success which more and more depends on tacit individual knowledge, undocumented factual and procedural expertise, essential for competent performance, and tediously learned by experience and example. To significantly increase economic productivity it is necessary, therefore, to increase the productivity of this knowledge-based and knowledge-driven work. However, a high performance relies on how knowledge workers and companies deal with some factors such as information overload, task switching, context loss, and knowledge processes. Knowledge workers access huge amounts of information available in personal desktops, company knowledge repositories (ranging from document repositories to knowledge management tools) and, eventually, on the Web. The result is that they waste time searching and navigating to find the information needed to complete the task-at-hand, or even attempting to figure out how they realized a similar task related to the task-at-hand some time ago. Furthermore, knowledge workers have to depend on personal communication and ad hoc collaboration and communication tools, including email, to coordinate their work. However, these tools do not unequivocally improve productivity: Taglocity1 estimates that Intel employees spend 20 h per week to manage their

1

http://www.taglocity.com/.

J.M. Go´mez-Pe´rez (*) • C. Ruiz iSOCO, Intelligent Software Components, S.A., Avenida Del Parteno´n, 16-18, Madrid 1 7a 28042, Spain e-mail: [email protected]; [email protected] F. Dengler Institut AIFB, Karlsruhe Institute of Technology, Englerstr. 11, Building 11.40, Karlsruhe 76131, Germany e-mail: [email protected] P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5_6, # Springer-Verlag Berlin Heidelberg 2011

107

108

J.M. Go´mez-Pe´rez et al.

email, a third of which are unnecessary; Davenport affirms that “while all knowledge workers surveyed used e-mail, 26% felt it was overused in their organization, 21% felt overwhelmed by it and 15% felt it actually diminished their productivity” (Davenport 2005). In addition, knowledge workers deal constantly with multitude of task. Thus, a knowledge worker typically spends a vast amount of time switching to working on a different task before completing the task-at-hand. Whenever there is a task switch, knowledge workers lose the work context that they have manually built up, leading to distraction, frustration, and loss of productivity. Besides all these factors, knowledge workers are engaged in processes. Some of these processes are formal business processes typically defined by the organisation focusing on describing how business processes take place for many years. Languages for such processes now exist, e.g. WS-BPEL2 for process execution and BPMN3 for process description. Moreover, business processes are static, i.e. once defined they are recurrently used in the same application domain, treated as stable, well-defined workflows with little or no variations in their execution based on some business rules that guide decisions. As a matter of fact, business processes are ill-suited with respect to change management, with evolution and adaptability being neglected in the past, preventing possible reactions in case of variable changing. However, as a consequence of the technical evolution, the increasing exchange of information and collaborative decision (Kotlarsky and Oshri 2005) among workers (e.g. analysts, researchers, etc.) carrying out their activities in knowledge-intensive applications, knowledge workers work around their own informal processes. These processes are often called knowledge processes and exhibit a totally different nature: they are quite flexible, neither standard, nor structured, and it is the experience, knowledge and intuition of the knowledge worker that drive the process to success. There is a huge variety of examples: the processes which an organisational employee uses to obtain information on a customer from a variety of sources; or the processes to set up a meeting, including booking a room, arranging refreshments and notifying reception of the names of visitors; or the processes of arranging the flow of technological operations in engineering design based on the specific character of the design artifact and the skill profiles of involved designers. They are frequently not written down, or if they are then only very informally. This hinders their reuse even by their creators, and certainly hinders sharing between colleagues. We need, therefore to provide assistance to knowledge workers in creating, reusing, sharing and also improving on these knowledge processes. While great productivity gains can be achieved in business processes by formalizing fixed and frequently executed processes into computer processable workflows, standardizing most work processes in a top-down manner is neither economical, nor possible in practice. This is probably one of reasons why informal

2 WS-BPEL (Web Services Business Process Execution Language) is an OASIS standard, see http://docs.oasis-open.org/wsbpel/2.0/wsbpel-v2.0.pdf. 3 BPMN is an OMG standard, see http://www.bpmn.org/.

6 Managing, Sharing and Optimising Informal Knowledge Processes

109

knowledge processes, though acknowledged as essential, are poorly supported at the enterprise level. The purpose of this chapter is twofold: Firstly, we give details regarding the notion of knowledge process with a deep comparison with business processes. Moreover, we give a formal description of what we understand as knowledge processes describing the complete knowledge process lifecycle. Secondly, we show different tools developed to deal with and exploit knowledge processes in order to empower knowledge workers’ productivity by significantly improving the mechanisms through which enterprise information is created, managed, and used.

6.2 6.2.1

Knowledge Processes Within the ACTIVE Project Some Definitions: Business Processes vs. Knowledge Processes

The term business process has received a lot of attention in corporations where the value of creating them for an enterprise is in the intellectual assets that those processes represent. A business process is usually understood as a set of coordinated tasks and activities that will lead to accomplishing a specific organizational goal, applied by a workflow which brings the details of the process. Nevertheless, Davenport (2005) pointed already out the definition of business processes in contrast of some others: “a structured, measured set of activities designed to produce a specific output for a particular customer or market. It implies a strong emphasis on how work is done within an organization, in contrast to a product focus’s emphasis on what. A process is thus a specific ordering of work activities across time and space, with a beginning and an end, and clearly defined inputs and outputs: a structure for action. . . . Taking a process approach implies adopting the customer’s point of view. Processes are the structure by which an organization does what is necessary to produce value for its customers.” Moreover, concepts, methods, and techniques from Business Process Management (BPM) (Weske 2007) support the design, configuration, enactment and analysis of these business processes. As opposed to traditional business processes, knowledge processes are defined by Strohmaier (2003) as representations of complex knowledge flows. They depict the generation, storage, transfer and application of knowledge that is necessary to create products or services. In contrast to that, we do not focus on knowledge flows and consider knowledge processes as (Still 2007) “high added value processes in which the achievement of goals is highly dependent on the skills, knowledge and experience of the people carrying them out”: e.g. a new product development processes. Those informal processes are used by people to perform difficult tasks requiring complex, informal decisions among multiple possible strategies to fulfil specific goals.

110

J.M. Go´mez-Pe´rez et al.

In general, both kinds of processes can be understood as a set of tasks and activities that will lead to accomplishing a specific goal, but while business processes are focused on organizational and highly structured goals at different levels of details, knowledge processes do not take that vision into account and is more focused in flexible and informal activities dependent on tacit knowledge and experience of users. For example, while a typical business process might be “An insurance claim process,” a knowledge process can be “Schedule a meeting” or “Book a travel.” While the former is based on a set of formalized steps (e.g. fill up an application form, wait for a response, etc.), the latter is very flexible, with no defined steps or even up to the worker (experience should make users to check some web sites instead of others). A comparison can be found in Table 6.1. In addition, knowledge processes are usually created on the fly by knowledge workers in every situation of their daily work. As soon as complex tasks arise knowledge workers create these processes based on their experiences and skills but also taking into account information about their current task context, and this supports them as they navigate a knowledge process. Usually there are many possible ways to achieve the process objectives or to reach a certain goal. Though, the knowledge worker has to make a lot of complex decisions to optimize his or her process and to reach the goal. For example, the knowledge worker could decide to reduce a given quality to be able to deliver in time or to deliver earlier. Furthermore, knowledge workers use their connection to other workers to carry out the process, because, most of the time, knowledge processes are collaborative. By performing a process collaboratively it is possible that each task is carried out by the most specialized, experienced and knowledgeable worker in that specific area. Having a net of relations within the organization is a very important asset for people executing knowledge processes. It is extremely important to continuously improve knowledge processes, by creating an environment through which they can evolve. It is crucial to establish an adequate process context (the combination of technologies, procedures, people, etc. that supports the processes). The process context must incorporate feedback mechanisms, change evaluation procedures, process improvement methods and techniques and must be flexible in order to be able to incorporate enhancements in an agile but controlled way. If the process is instantiated frequently and the instances are homogeneous, it is possible to create great process models that dramatically increase the efficiency of Table 6.1 Comparison: business process vs. knowledge process Business process Goal Business-goal driven Scope Enterprise Nature Static Description Formal Guided Externally coordinated Analyzed Monitored, analyzed, optimized

Knowledge process User-goal driven Individual Dynamic Informal Ad hoc/spontaneous Not monitored, emerging

6 Managing, Sharing and Optimising Informal Knowledge Processes

111

the process. The best way to ensure process improvement is to generate an environment in which people are motivated, enthusiastic and passionate to provide feedback to the underlying knowledge process management system. There is also the evolving area of case management (Weske 2007) in the BPM community. According to Strohmaier (2003), events triggered from outside drive a collaborative, knowledge intensive and dynamic process. Those events determine at runtime which activities need to be performed by knowledge workers handling the case and whether additional steps are required. In contrast to informal processes, the control flow cannot be expressed in an explicit process diagram defined in advance.

6.2.2

Scenario: Hiring Process

Figure 6.1 provides a scenario concerning a hiring process which is a common process within the enterprise (it is an adapted version of the hiring process you can find in Hill et al. (2006)). This sample shows how a person – in this case Alice – would perform certain tasks for the hiring process in her small company. The company is so small that, so far, there is no valid business process defined for hiring people; because of this, the process is not fixed or well-defined and it depends highly on the skills and experiences of the hiring expert. The following actors participate in this process: Dave, the hiring manager (manager of the group with a vacancy) – Makes the ultimate decision as to whether to hire a candidate; Alice, hiring expert – Performs the initial filter of candidates and

Vacancy

Information about vacancy

Mail about job description

Post and Search

Add open position to web site

Ask to search for candidates

Alice Hiring Expert

Bob Alice’s assistant

Dave Hiring Manager

Boss

Chris The candidate

Fig. 6.1 Knowledge process example

Search online services

Review

Send applicants per mail

Review and forward

Screen

Set up interview with candidate

Phone interview

Taking notes

Inform about candidate

Send offer

112

J.M. Go´mez-Pe´rez et al.

only forwards to Dave those that she deems appropriate; Bob, Alice’s assistant – Performs administrative functions for Alice; Boss, Alice’s boss; and Chris is the candidate applying for the job. The following list explains the process steps and with whom and what Alice is communicating: 1. Boss informs Alice that Dave has a vacancy. 2. Alice and Dave exchange e-mails on the text of the job description and then meet to finalize. 3. Alice posts the vacancy in the online service with the text from the e-mail. 4. Alice asks Bob to search the online service for viable candidates (i.e., those who have not explicitly applied for the job but have the necessary skills). 5. Bob searches the online service and sends Alice e-mails with viable candidates by detaching the resumes from the online service and sending them as e-mail attachments. 6. Alice reviews applicants from the online service (both those who have applied for the position and those whom Debra found). 7. Alice forwards the candidates whom she deems viable in an e-mail to Dave. 8. Dave responds with an e-mail to inform Alice of the candidates whom he wishes to pursue and those whom he wishes to reject. He also includes his initial thoughts on the candidates. 9. Alice sets up interviews by phone for herself and the candidates. 10. Alice takes notes during the interviews by phone. 11. Alice informs Dave of the candidates whom she thinks Dave should send an offer. 12. Dave sends an offer to the candidate.

6.2.3

Knowledge Process: A formal Extended Definition

As seen, previous definitions for knowledge processes are incomplete and do not cover all relevant features knowledge workers need to face nowadays. Then, we have extended that definition in the following way: A knowledge process is • A loosely defined and structural ramified collection of tasks, • not fully defined in terms of structure and the order of activities, • in which activities require a decision by a knowledge worker about the follow-up task, • in which the actor knowledge worker uses her experience and expertise as well as her working context to decide for the successor task, • in which decisions have to been taken during execution time over the process development path and lead to emerging structural ramification constituted by admissible alternatives, and then, with dynamic ramification as one of the key features.

6 Managing, Sharing and Optimising Informal Knowledge Processes

6.2.4

113

Knowledge Process Life Cycle

In general, competitiveness of organizations depends on how they efficiently and effectively create, locate, capture, and share organization’s knowledge and expertise (Zack 1999). A similar statement can be applied to knowledge processes and, then, four different stages can be defined as the knowledge process lifecycle: • Definition – Capture and Acquisition. Knowledge processes are either created by knowledge workers or can be acquired from interaction with others. • Share – Storage and Retrieval. This stage bridges upstream repository creation to downstream knowledge distribution. • Search. This stage represents the mechanisms used to make knowledge process repository content searchable and how useful that information is. • Compare – Presentation. The value of knowledge is pervasively influenced by how it is visualized and the features such visualization tools provide.

6.3

Tools for Knowledge Processes within the ACTIVE Project

This section covers the main tools and approaches we have followed in the ACTIVE project to deal with knowledge processes. These tools: • Let knowledge workers create processes and tasks, and manage and structure them at different levels of details. E.g. A knowledge worker can define a process for scheduling a meeting as a set of tasks – complete the list of participants, check their availability, fill out the request to arrange rooms and refreshments, and wait for confirmation from administration • Let knowledge workers create a process by recording their actions at runtime • Let knowledge workers follow a step-by-step application to automate and simplify some of the most common activities. • Let knowledge workers visualize processes and how the different elements relate to each other.

6.3.1

Framework for Knowledge Process Management

The goal of such a framework is to support knowledge workers in order to (re) structure knowledge processes at runtime in a top-down and user-driven approach (knowledge workers define their own processes, tasks, and related resources) in a lightweight manner (processes still depend on the knowledge worker who is driving the process). Thus, the framework provides the conceptual process model and data structures as well as a set of services and applications to enable knowledge process management by knowledge workers.

J.M. Go´mez-Pe´rez et al.

114

The main components of the framework along with the connections among them are all displayed in Fig. 6.2. In addition, the framework and its tools are integrated as part of the ACTIVE Knowledge Workspace. These are: The Task Pane – It is the front-end offering manual facilities to create and manage processes at different levels of details helping users to manage their daily work into processes and more fine-grained tasks. Also, it can be used to associate resources, like documents, web address, or colleagues, with processes and tasks. The knowledge worker can also import and export processes and templates or set the active task in the Task Pane. This approach facilitates to reduce the time for process switching – the Task Pane offers an immediate way to change between processes- and alleviate context loss – the Task Pane manages the context in terms of tasks and information resources associated to a process.

ACTIVE Knowledge Workspace Services

Recording

Task Pane

Task Wizard

Template Repository

Task Manager

Task Repository

Fig. 6.2 Framework for knowledge process management

patterns

Context Mining Service

Template Manager

instances

instances

Task Service

Semantic Media Wiki

templates

ACTIVE Taskbar

6 Managing, Sharing and Optimising Informal Knowledge Processes

115

The Task Recording (Fig. 6.3) – It enables knowledge workers to automatically record the sequence of actions on his system (e.g. opening a document, browse a web page). Conceptually, it is comparable to macro recording which was used in many applications (e.g. Office Word). The knowledge worker can start, pause, and stops the recording session by pressing the corresponding buttons. The recording collects all the events and adding some metadata (e.g. associated resource, title, keywords, etc.). After stopping the recording, the user can rearrange the recorded sessions, structuring the sequence of actions by introducing new processes and tasks or by grouping actions into existing ones. Task Wizard – The manipulation of daily activities, in form of templates or instances, requires a considerable effort. However, it is likely to be easier to perform this task using a wizard, especially for complex or infrequently performed tasks where the user is unfamiliar with the steps involved. Then, the Task Wizard guides knowledge workers through a set of steps with a particular purpose: select a template or instance based on some keywords, tag cloud, or according a recommendation; create a template or instance from a previous one or from scratch, where the wizard guide knowledge workers with suggestions on task balance or related tasks; finally, share templates and instances into local and community repositories (e.g. storing templates in a Semantic MediaWiki). Task Service – It is the core of the framework for knowledge processes. It defines the knowledge process model and the corresponding service interface to manage processes, tasks, and resources, besides other operations (e.g. tagging). Furthermore it tracks the invocation of tasks defined by an actor, the time, and the state the process is in. Such invocation information is exploited by the bottom-up approach (mining actions and events to come up with process prediction models, see Chap. 7).

Fig. 6.3 Task recording

116

J.M. Go´mez-Pe´rez et al.

Semantic MediaWiki – This tool is used as collaboration and sharing platform for templates. Thus, while knowledge processes are created on the client side, domain expert can create templates (manually from scratch or from knowledge processes, or using mining techniques) to be stored inside a Semantic MediaWiki to be visualized, discussed and exchanged with other knowledge workers. A screenshot of the Semantic MediaWiki as corporate knowledge process template repository can be seen in Fig. 6.4. Context Visualizer – In addition to these tools, a key factor for increasing the productivity of knowledge workers is to help knowledge workers manage and understand their daily collaborative processes. These are lightweight and highly flexible processes carried out by knowledge workers and highly depending on the context which defines the boundaries and environment of processes, and how decisions are taken. Therefore, bearing in mind that each complex collaborative process occurs in some context, the articulation of such a context would help understand the underlying relationships within collaborative processes. However, as any other complex system, contexts can be large in size and complexity, difficult to understand and control. Thus, and although visualization of complex collaborative processes can be addressed from different aspects, there is a need for new ways of visualizing complex contexts which can assist knowledge workers in a better understanding of their dynamics. The Context Visualizer (Fig. 6.5) help users to understand complex collaborative processes through the visualization of their corresponding contexts including elements related to a working context (knowledge processes, people, and resources), contextual information about context and elements, direct relationships

Fig. 6.4 Semantic MediaWiki as template repository for knowledge processes

6 Managing, Sharing and Optimising Informal Knowledge Processes

117

Fig. 6.5 The Context Visualizer

between related elements in the context (in red), different icon size showing its relevance in context, and filtering options (e.g. based on resource type).

6.3.2

Collaborative Process Development

As stated above knowledge workers should be able to define their own processes and to share them as templates among each other. The components of the framework for knowledge process management support the sharing of process templates created by individual knowledge workers. The aggregate knowledge of a large group is superior to the knowledge of one or a few experts. Thus, it is equally important to provide knowledge workers with means to develop processes collaboratively. Knowledge workers have different experience with modelling processes. Thus, there are usually knowledge workers involved, who are novice in process modelling. Recker et al. (2010) have investigated how novice model business processes in the absence of tool support. Their findings are that design representation forms chosen to conceptualize business processes range from predominantly textual, to hybrid, to predominantly graphical types. They have also discovered that the combined graphical and textual types achieve higher quality scores. Another survey, analyzing the used modelling constructs of BPMN, shows that in most BPMN diagrams, less than 20% of the BPMN vocabulary are regularly used and the most occurring subset is the combination of tasks and sequence flows (zur Muehlen

118

J.M. Go´mez-Pe´rez et al.

and Recker 2008). Based on these findings, requirements for collaborative process development can be derived: • Manual modelling support for novice users. Knowledge workers, who are novice in process modelling, need manual modelling support, so that they can create, extend and follow the processes without the assistance of an expert. The tool requires a rich user interface providing the user with means for interacting with processes in a highly intuitive manner. As a result this leads to trade-off between expressivity offered to develop the formal process model and the usability of the tool. • Collaboration support. Knowledge worker must be able to discuss process models asynchronously. Changes of the process model have to be tracked and knowledge workers should be enabled to access the version history and to revert to previous versions. In addition design rationales should be documented. • Structured process documentation support. The process models must be stored in a machine-processable documentation format, including semantic representations. Knowledge workers must be able to interlink between process descriptions and external resources As a solution to support such a collaborative, distributed, and iterative process development, we combined Semantic MediaWiki (SMW) (Kr€otzsch et al. 2007) with the graphical open-source process editor Oryx (Decker et al. 2008), allowing the use of formal semantics in combination with natural language to describe processes. SMW was extended to be compatible with the Oryx to act as a process knowledge repository. In addition, the graphical editor was extended to display and edit wiki pages at the bottom of the screen as shown in Fig. 6.6; as a consequence user can directly access the corresponding wiki page within the process editor.

Fig. 6.6 Wiki-based process editor

6 Managing, Sharing and Optimising Informal Knowledge Processes

119

We support the Basic Control-Flow Patterns introduced in Russell et al. (2006). Every single process step (task) is represented as a wiki page belonging to category Process Element and linked via the properties has Type to the corresponding type (Task) and Belongs to Process to the corresponding process, represented as a wiki page (process summary page) in SMW. An activity is the basic element of our process. Depending on the granularity level of the process this can vary from atomic activity, such as open a web page, to activities describing a whole subprocess. To express the control flow of the process, we use edges in the diagram and special predefined process elements (gateways). If an element has a successor we draw an edge from the activity to the successor activity in the diagram and store this with the additional property has Successor on the corresponding wiki page in SMW. For more successors executed in parallel (parallel-split pattern), a Parallel Gateway is used in between the activities. An activity can have several successors, but only one has to be selected and executed (multi-choice pattern). Therefore we use the Databased Exclusive Gateway without conditions. The Data-based Exclusive Gateway with conditions is used to split based on a condition (exclusive-choice pattern). A condition is stored as an n-ary property. The distinction between the synchronization pattern and the simple-merge pattern is realized by using the Parallel Gateway and the Data-based Exclusive Gateway the other way round to merge different branches of a process. The advantages of such an approach are: • The combination of natural language with formal semantics allows collaborative modelling for both novice and experts. Textual and graphical elements can be used interchangeably and complementarily. If the user does not know the graphical representation of a process element, natural language can be used to describe it. • This approach uses an extendible underlying schema. Users can introduce their own properties in the wiki by using the SMW property syntax on the process element wiki page. Thus, processes can be linked to existing knowledge structures (e.g. what input documents are used, can be made available and processable for computers). • Standard wiki features can be used for process modelling, like versioning, watch lists, reverting, etc. • SMW acts as a process repository where processes and their process semantics are stored. Process knowledge can be linked, queried and displayed on process pages and on other wiki pages.

6.3.3

Refactoring and Optimization

The variety and ways of carrying out knowledge processes and the underlying complexity leads to the need of tools for refactoring and optimizing them in order to help knowledge workers either restructure existing knowledge processes or select a follow-up action, and eventually, to increase knowledge processes performance, dynamicity and flexibility.

120

J.M. Go´mez-Pe´rez et al.

For this reason, knowledge processes need to be quantified to make them comparable in terms of the different factors which might influence such processes. On the whole, three factors influence knowledge processes: Firstly, business processes which might trigger knowledge processes; secondly, knowledge processes which might trigger another knowledge processes of another person because their social interaction (e.g. Bob has to prepare a presentation and could ask Alice to provide some input to him because he knows she prepared some other related presentation); thirdly, existing knowledge from user experience or even by using document repositories or Wikis within the organization. Based on this challenging motivation to make different knowledge processes comparable in order to refactor and optimize them as part of the ACTIVE project, we have developed a three-stage framework: 1. Metrics and measures to quantify knowledge processes In order to make knowledge processes comparable, a set of measures and metrics are defined to quantify knowledge process instances (also called knowledge process traces). Those metrics are important to support semi-automatic refactoring of knowledge processes and are based on the aforementioned factors. In particular, metrics of business processes and workflows about complexity and costs for knowledge processes were adapted. In addition to this, the metrics do also cover some knowledge worker specific values based on decisions about follow up actions within a knowledge process using his skills and context. This is an important distinction between business processes and knowledge processes so that we could add additional metrics which reflects skills and roles of knowledge workers directly. We categorized the metrics into: measurable metrics (like size, performance or external costs), user-dependable metrics (like skill or feasibility), and qualifiable measures (like quality of the result or satisfaction). Furthermore, as aggregation of these measures, an indicator called knowledge process trace indicator provides an overall metric to compare knowledge processes. Such aggregation is performed by a logic score of preferences (LSP)-based approach (Dujmovic 2005) which enables to express the knowledge process trace indicator as a function of metrics of all these categories. This provides a highly flexible methodology to aggregate different metrics. Basically, the usage of weights for each of the values makes this approach adaptable and tuneable for different perspectives. 2. Foundation for knowledge process optimisation From the formal definition in the previous stage, the basic libraries for quantification and calculation of metrics and measures were implemented in order to be reused in visualisation, refactoring, and optimization. 3. Tools for refactoring and optimization of knowledge processes As final step, we provide a tool to facilitate refactoring for knowledge processes. A refactoring tool typically lets knowledge workers improve knowledge processes by applying a series of small behaviour-preserving transformations (e. g. join two tasks) even promoting reuse (e.g. copy a task from one knowledge process to

6 Managing, Sharing and Optimising Informal Knowledge Processes

121

Fig. 6.7 The refactoring tool

another) while the cumulative effect of each of these transformations is quite significant. By doing such modifications in small steps you reduce the risk of introducing errors while improving design, efficiency, and flexibility. Figure 6.7 shows a screenshot of the tool divided into three main sections: on the left, the knowledge process instance selected by the user to be compared and refactored; on the centre, a set of related knowledge process instances. These knowledge process instances can come from two different sources: on the one hand, because they may have been created from the same template; on the other hand, they may have been detected by the mining algorithm; on the right, the knowledge process template related to the knowledge process instance selected by the user. The combination of these tools might be exploited in several types of scenarios. For example, when a user starts such a knowledge process, typically only a small amount of information about the process and the context is available. Thus, the log data is insufficient for process mining. In this case, user interaction is exploited and the process refactoring becomes semi-automatic which helps to optimize the process more quickly and reliably. In addition to this we even might offer refactoring recommendations highlighting main difference between knowledge processes.

6.3.4

Security and Privacy Issues

The scenario in this knowledge economy is more and more collaborative and heterogeneous, where knowledge is defined, used and shared across different groups and domains. Sharing this knowledge allows users to create social relationships, forming working and knowledge-based groups beyond organizations,

122

J.M. Go´mez-Pe´rez et al.

but it also poses new challenges and risks in terms of the security and understanding that new shared information. This scenario raises the following two needs: (1) Knowledge workers need to be provided with tools to create and manage virtual boundaries where knowledge is shared with other workers. This means having flexible and powerful security mechanisms and policies which can be defined dynamically and offer inference mechanisms; (2) Knowledge workers need to be provided with visualization tools to understand the complex relationships within knowledge processes. These statements hold for any company where the typical scenario is collaborative, decentralized and heterogeneous, and knowledge processes are shared across the same and different domains and organizations. In this context, these virtual boundaries, which connect different users and groups through the sharing of knowledge processes, and which are tied by different security mechanisms, are here called Knowledge Spheres. In addition to the term, we propose a Knowledge Sphere Framework, a flexible ontology-based framework to handle security and privacy and automate sharing knowledge processes by knowledge workers across organizations. In a nutshell, Knowledge Sphere Framework offers the underlying infrastructure to manage Knowledge Spheres and their security policies and a graphical tool to represent them facilitating an understanding of their relations and related contents. In more detail, the main components are: Knowledge Sphere Ontology – This ontology brings concepts and properties to define how knowledge-based communities are created and formed, and how security and privacy policies are defined and satisfied. The Knowledge Sphere Ontology combines and extends two other ontologies: SIOC (Semantically-Interlinked Online Communities)4 for describing information from online communities, and used in the Knowledge Sphere Ontology to create Knowledge Spheres; and, the KAoS ontologies5 for describing independent-platform policy originally oriented to dynamic and complex software agents applications, and later adapted to grid computing and Web Services, and used in the Knowledge Sphere Ontology to define the security policies to be applied to Knowledge Spheres. While SIOC is very limited in terms of security or access control mechanisms, KAoS does not cover the actions associated to security policies required to disclose knowledge processes (e.g. allow access and give modifications rights). An example of how the Knowledge Sphere Ontology looks like is shown in Fig. 6.8 for the case of defining a Knowledge Sphere – individualKS1 – with a positive authorization policy – policyKS1_A – with two access actions: a read access action – actioniSOCOLabRead – for people from iSOCOLabGroupMadrid and a write access action – actioniSOCOLabWrite – for people from iSOCOLabGroupMadrid having administration role.

4 5

http://sioc-project.org/ontology. http://ontology.ihmc.us/.

6 Managing, Sharing and Optimising Informal Knowledge Processes

123

Fig. 6.8 Knowledge sphere ontology example

Knowledge Sphere Service – It manages all the related actions for managing Knowledge Spheres, including a security module which infers if users have permissions to carry out the action in the given Knowledge Sphere. This service runs ontology inference on the Knowledge Sphere Ontology, transform security policies into semantic rules, and eventually resolve the permission request. An example of the Knowledge Sphere Service is as follows: A given the user – John Sowa – wants to carry out an action – Delete a knowledge process – on the Knowledge Sphere – Proposal making. The Knowledge Sphere – Proposal Making – has several policies assigned. For John Sowa being able to delete a knowledge process there must exist a policy that grants him permissions. In this example, there exists a security policy describing that members of the group – Proposal Administrators – can execute the Action – Delete Knowledge Process – related to the Knowledge Sphere. Since John Sowa is not member of this group he has no rights to perform the action and delete the knowledge process. Knowledge Sphere Visualization Tool (Fig. 6.9) – This is a graphical tool to represent and visualize Knowledge Spheres, facilitating the understanding of their relations and related contents. It comprises three main parts: the upper menu bar, the right hand side Diagram Pane that shows the graphical representation of the Knowledge Spheres, the left hand side Information Pane that shows information about the elements explored in the Diagram Pane.

6.4

Conclusions

As a consequence of the increasing exchange of information and collaborative decision among knowledge workers, the interest on knowledge processes has risen. These knowledge processes are different to business processes with an own nature: they are user-driven, informal, dynamic and adaptive, based on

124

J.M. Go´mez-Pe´rez et al.

Fig. 6.9 Knowledge sphere visualization tool

communication, not-well structured, dependent on skills, knowledge and experience of users. Moreover, the performance on knowledge processes marks the productivity of knowledge workers and critically determines the eventual success or failure of a corporation in the knowledge society In this chapter, we provide an insight into knowledge processes as a key challenge for modern organizations, the main differences with business processes, and approaches to address their management. The success of an effective exploitation and support of knowledge processes are based on providing useful tools and applications for knowledge workers to deal with knowledge processes facilitating their comprehension and according a concrete contextual factors which are relevant to the process. With this purpose, we present several building combined in a holistic view for knowledge process management to enable the knowledge worker to improve his daily work in terms of formal and informal processes (Fig. 6.10). Basically, the steps can be combined as part of knowledge process lifecycle as follows: Define: the knowledge worker defines a sequence of tasks and actions as a knowledge process. In addition, a manager or a domain expert can define some process

6 Managing, Sharing and Optimising Informal Knowledge Processes

125

Fig. 6.10 Knowledge process lifecycle covered by the ACTIVE tools

templates to be reused; Share: using the Semantic MediaWiki for sharing the process templates with others and enable it for collaboration and improvements. A similar statement can be applied for knowledge processes; Search: there are various ways to search for processes, such the knowledge sphere visualisation; Compare, the refactoring tool supports the comparison of process templates with instances. This provides feedback about real executions compared to the envisioned templates; Redefine: the features supported by the Task Pane and the knowledge from the comparison can be used to redefine and improve knowledge processes and templates.

References Davenport TH (2005) Thinking for a living: how to get better performances and results from knowledge workers. Harvard Business School Press, Cambridge Decker G, Overdick H, Weske M (2008) Oryx – an open modeling platform for the BPM community. In: Dumas M, Reichert M, Shan MC (eds) Business process management, vol 5240, Lecture notes in computer science. Springer, Heidelberg, pp 382–385. doi:10.1007/9783-540-85758-7_29 Dujmovic J (2005) Continuous preference logic for system evaluation. Department of Computer Science, San Francisco State University, San Francisco. doi:10.1109/TFUZZ.2007.902041 Hill C, Yates R, Jones C, Kogan SL (2006) Beyond predictable workflows: enhancing productivity in artful business processes. http://www.research.ibm.com/journal/sj/454/hillref.html. Accessed 24 Nov 2010

126

J.M. Go´mez-Pe´rez et al.

Kotlarsky J, Oshri I (2005) Social ties, knowledge sharing and successful collaboration in globally distributed system development projects. Eur J Inform Syst 14:37–48. doi:10.1057/palgrave. ejis.3000520 Kr€otzsch M, Vrandecic D, V€ olkel M, Haller H, Studer R (2007) Semantic wikipedia. J Web Semantics 5:251–261. doi:10.1145/1135777.1135863 Recker J, Safrudin N, Rosemann M (2010) How novices model business processes. In: Hull R, Mendling J, Tai S (eds) Business process management, vol 6336, Lecture notes in computer science. Springer, Hoboken, pp 29–44. doi:10.1007/978-3-642-15618-2_5 Russell N, Ter Hofstede AHM, van der Aalst WMP, Mulyar N (2006) Workflow control-flow patterns: a revised view. Technical report BPM center report BPM-06-22, BPMcenter.org, doi: 10.1.1.93.6974 Still K (2007) Exploring knowledge processes in user-centred design. Electron J Knowl Manag 5:105–114. doi:10.1.1.93.1675 Strohmaier M (2003) A business process oriented approach for the identification and support of organizational knowledge processes. In: 4. Oldenburger Fachtagung Wissensmanagement, Potenziale – Konzepte – Werkzeuge Weske M (2007) Business process management: concepts, languages, architectures. SpringerVerlag, Berlin, Heidelberg. doi:10.1007/978-3-540-73522-9 Zack MH (1999) Managing codified knowledge. Sloan Manage Rev 40(4):45–58 zur Muehlen M, Recker J (2008) How much language is enough? Theoretical and practical use of the business process modeling notation. In: Bellahsne Z, Lonard M (eds) Advanced information systems engineering, vol 5074. Springer, Montpellier, pp 465–479. doi:10.1007/978-3540-69534-9

7

Machine Learning Techniques for Understanding Context and Process Marko Grobelnik, Dunja Mladenic´, Gregor Leban, and Tadej Sˇtajner

7.1

Introduction

Machine Learning techniques have been developing since the middle of the twentieth century. Their original focus was on game-playing programs and then moved on to finding regularities in database records (of patients, supermarket transactions, credit card activity, stock exchange activity, etc.), modeling scientific measurements (equation discovery, ecological modelling, etc.), speech recognition, user modeling and spam filtering. Current applications include real-time data modeling (real-time sensing behavior, tracking moving objects), semantic data annotation, analysis of semantic sensor networks and monitoring real-time cyber data to track interest and opinions. Capabilities of the available technology offer practical benefits but also raise privacy issues (Mitchell 2009). In this chapter we focus on the machine learning techniques themselves and do not deal with privacy or other related issues.

7.2

Machine Learning

In general, we can say that Machine Learning seeks to answer the question “How can we build computer systems that automatically improve with experience, and what are the fundamental laws that govern all learning processes?” (Mitchell 1997). More formally, a machine learns with respect to a particular task T, performance metric P, and type of experience E, if the system reliably improves its performance P at task T, following experience E. Depending on how we specify T, P, and E, the M. Grobelnik (*) • D. Mladenic´ • G. Leban • T. Sˇtajner Artificial Intelligence Laboratory, Jozef Stefan Institute, Jamova 39, Ljubljana SI-1000, Slovenia e-mail: [email protected]; [email protected]; [email protected]; [email protected] P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5_7, # Springer-Verlag Berlin Heidelberg 2011

127

128

M. Grobelnik et al.

learning task might also be called by names such as data mining, autonomous discovery, database updating, programming by example, etc. (Mitchell 2006). For instance, we can have a task T: Categorize email messages as spam or legitimate, a performance metric P: Percentage of email messages correctly classified and experience E: Database of emails, some with human-given labels. Supervised machine learning techniques can be applied on the database of e-mails to build a model for classifying e-mails as spam or legitimate. Usually these would require representation of the data as feature-vectors, so we need to define a set of features that can be used for describing e-mails and whose values we can obtain from the database of e-mails (e.g., date of sending the e-mail, words in the e-mail subject, words in the e-mail body) and sometimes including additional knowledge sources (e.g., professional skills of a person receiving e-mail).

7.2.1

Data Representation and Modeling

Data points that are used in Machine Learning are usually represented as featurevectors in an n-dimensional space capturing important characteristics of the data. Depending on the data that is represented, features can have numerical values (e.g., size of an e-mail) or categorical values (position of an e-mail receiver in a company organizational structure). When representing text, it is common to assign a feature to each word in a document collection and represent each document as a vector reflecting word frequencies (Mladenic´ 2007). When representing images, features can correspond to pixels on an image. The number of feature also varies depending on the data and task, in some cases the original representation of the data is in a very high dimensional space and some dimensionality reduction needs to be applied in the pre-processing steps of the data analysis (Mladenic´ 2006). In addition data points can have labels (e.g., e-mail can be categorized as legitimate or spam) or not. Addressing tasks that needs labels means applying supervised machine learning techniques (e.g., classification) for modeling the data, while the tasks that do not care about labels suggests that unsupervised machine learning techniques (e.g., clustering) should be applied for modeling the data. Following the previous example on e-mail filtering, we can have a collection of e-mails that we would like to organize into folders assuming no folders exist. Representation of e-mails using feature vectors can be similar to that for the classification task, just that the output is a model grouping similar e-mails together. These can be further used for classifying new e-mails as belonging to one of the identified groups. The latter is similar to the scenario that we have followed in modeling context. First unsupervised machine learning techniques are used for context discovery, based on the history of users’ activity. Then the current user activity is classified

7 Machine Learning Techniques for Understanding Context and Process

129

into contexts and related resources are recommended for probable use in the near future. The rest of this section describes machine learning techniques that are directly relevant for understanding context and process.

7.2.2

Multi-relational Clustering

The problem of identifying parts of data collections relevant for each context can be approached as a multi-relation clustering problem. The motivation behind using relational clustering for context modeling is the fact that a domain data model of knowledge work can be modeled as a graph with multiple types of nodes: the knowledge workers themselves are one type, the information resources they are using are another, and the events that represent the uses of the resources are another. Since the different nodes are also of distinct types, we cannot make the assumption of identical and independent distribution of features, which is implicitly assumed when using classic clustering techniques which are agnostic of node type (Banerjee et al. 2007). For instance, assume that we have three tables. (1) A table of people working on the contexts, giving some basic information on each person. (2) A table of documents written in the contexts, having text of each document and a list of its authors. (3) A table of events recording that a person has accessed a document at some time (related to a table of people and a table of documents). In general, one can assume that knowledge workers while working on one project, switch between different tasks related to the project and that each task consists of a set of actions performed in more or less fixed order. By multi-relational clustering we would like to cluster people, documents and events so that events, related for the same project are clustered together and events, related to the same action are clustered together. Besides choosing an appropriate algorithm to fit the data model, another important aspect of context discovery is selecting appropriate features (Sˇtajner et al. 2010). This varies from domain to domain, but unless we have supervised examples to do features selection from, we can resort to the following guidelines: at the data level, we can distinguish between different contexts by different content keywords, resources and people, involved in the events. This means that context discovery uses literal names and affiliations of people as features, as well as the literal contents of the document, since these are the features we have determined to be important for describing a context.

7.2.3

Semi-supervised Clustering

While clustering has proven to be effective in exploratory and large-scale context discovery, context modeling for the enterprise environment in some cases imposes stricter standards on accuracy on context quality than is available from

130

M. Grobelnik et al.

unsupervised methods. From the usability point of view, the semi-supervised aspect also lets the knowledge worker feel more in control over the whole context definition process, delivering overall better quality and more meaningful clusters. In recent years, there has been a lot of interest in the development of semisupervised methods for clustering data which accommodate supervision from the user. Most often, such supervision is in the form of constraints (Basu et al. 2008), for instance using must-link and cannot-link constraints over pairs of data points (Wagstaff and Cardie 2000) or cluster-level balancing and size control (Davidson and Ravi 2005). However, instance-level models for supervision require that the human supervisor understands and visualizes the whole collections of data points in its entirety, which is rarely practical. On the other hand, cluster-level models may be too coarse a tool for guiding the clustering in a desired direction. As a complementary supervision technique, we can also apply feedback from the user as conditional constraints (Dubey et al. 2010). For instance, instead of asserting the exact pair-wise linkage constraints between data points, the user can give assignment feedback, where he reassigns a data point to a more relevant cluster, or alternatively, cluster description feedback, where the user modifies a cluster’s feature vector to a more meaningful description. These constraints are commonly implemented as iterative feedback loops gathering supervision data in iterative steps from the user. They can also be integrated into the k-means framework as an additional criterion for minimizing constraint violation while still maintaining low error. Experiments in (Dubey et al. 2010) conclude that cluster-level assignment and description feedback enables faster convergence and better results than pair-wise cannot-link and must-link constraints. The application of semi-supervised clustering for context mining can be applied both as assignment and cluster description feedback. When the user explicitly assigns an information resource to a context, we can interpret that as assignment feedback. On the other hand, cluster description feedback has also been implemented in a different fashion: instead of letting the user change the context description, we let the user decide with a yes-no question whether the context is relevant.

7.2.4

Sequence Mining

Various flavors of Markov models, such as probabilistic deterministic finite automata (Jacquemont et al. 2009) have been used for modeling processes, assuming that a process can be seen as a collection of sequences. Modeling process then can be addressed as identifying sequences in the data and connecting them to a meaningful process model. The general idea behind this is that by learning a conditional probability model for the sequences, we are able to implement predictive functionality into the knowledge worker’s workspace. In practice, there are several applications where predictive functionality based on sequence mining can be used (Dong and Pei 2007).The first example is suggesting the most likely information resource for a given moment. For this application, we look at the

7 Machine Learning Techniques for Understanding Context and Process

131

history of the knowledge worker’s resource usage – internet browsing history, opening various documents, communication via e-mail. From that, we represent these individual events as actions, giving them a level of abstraction. For instance, some deliverable document edits can be seen as edit-project-document actions. The process model then captures the sequential dependencies between these events and gives us a conditional probability of any resource being required at the current time, given that we are aware of the immediate history of information resource usage. For instance, imagine that we are editing a project-related document (such as a deliverable), The model can then suggest that of all possible different future actions, we will likely send a message to a project partner soon or open a similar project-related document. The advantage that this prediction provides is that we can maintain a list of the top most likely resource in a given time, shortening the overhead of having to look for them. Figure 7.1 shows an example of such a sequence-based resource suggestion, showing two distinct sets of recommendations. Furthermore, it demonstrates integration of both context and sequence mining – besides sequence information, we also favor resources which are relevant for the current context.

Fig. 7.1 Different sets of resource predictions, the first predicting most likely resources after opening a “validation and testing” document, and the second after opening a document with “sdk” technical documentation

132

M. Grobelnik et al.

When designing a sequence mining application, there are several different aspects of the problem that require consideration in choosing a good model for implementing them. The first question that needs to be answered is the relationship between events and actions: should we define them atomically as one-to-one, or can a single event represent multiple actions? For instance, an ordinary email message may in some domains only be an e-mail-to-project-partner, but in other domains, it may at the same time be the action of e-mail-proposal-to-key-client. This requires us to model a single event with multiple features, which is a different class of sequence models. A second consideration is on the order of the model – a first-order model only captures direct sequential dependencies, while a higher-order model can predict more interesting and longer sequences, similar to what we can produce with n-gram language modeling. A third consideration is on the definition of “sequence” itself. Do we consider the sequence to be strict, as in A-strictly-follows-B, or do we impose a less strict A-before-B. All of these variables affect the complexity of the model and impose constraints on the scalability of the approach while giving us richer models.

7.3

Context and Process

Context as addressed in this chapter is used as a term for grouping/packaging information for a particular need. A criterion for selecting or prioritizing information from a broader pool of information can be called a contextual model. We can say that a good contextual model is the one which selects the right information for a particular need in some cases that may be related to personalized information delivery. Process as addressed in this chapter is seen as a sequence of tasks or activities performed in order to achieve some goal. More about knowledge processes is described in Chap. 6. Here we focus on using machine learning techniques for automatically grouping the actions of the user into tasks and detecting common sequences of tasks that can occur independently of the context. In the research literature (Guo and Sun 2003; ECAI 2006; VUT 2007) we can find different views on context depending on the aspect that is observed and the purpose of using context. For instance, in Wikipedia context analysis (http://en.wikipedia.org/wiki/Context_analysis) is described as a method to analyze the environment in which a business operates. Depending on the aims of observing context, context can be defined from a formal point of view, in terms of its dynamics, scenarios of its usage, type of data it is modeled from, its usage/user base, importance of efficiency when talking about context, acquisition of context or, evaluation of context. Examples of context characteristics along several dimensions are the following:

7 Machine Learning Techniques for Understanding Context and Process

• • • • • • • • •

133

Formalism: logic based versus probabilistic descriptions Dynamics: static versus temporal/dynamic contexts Scenarios: global model versus multiple local models Cross modal: modeling contexts across different data modalities (text, multilinguality, social networks, audio, images, video, sensors) User aspects: context for single user versus user communities versus contexts for machine processing Efficiency: expressivity versus scalability Acquisition: manual versus semi-automatic versus automatic approaches Best practices: economy of different application scenarios Evaluation: information compression (not really addressed yet)

7.3.1

Representation

Context representation as proposed in this chapter is built on the top of the TimeNetwork-Text (TNT) store (Grobelnik et al. 2009) that enables capturing and storing the data for further processing using context mining and task mining approaches. The context mining capabilities of the TNT store aim at identifying the main context of the knowledge worker from a streamed log of events. Contexts are represented as abstractions of the TNT events, where each event has three components: Text, Network, and Time as defined by TNT model. Notice that several TNT events can overlap in the content of their components. For instance, a person sending five e-mail messages appears in five TNT events as a sender and that can be helpful in identifying context and tasks. The representation of TNT events captures information about data objects involved in the TNT event and it is used as a basis for context representation. Basing context representation on data objects, we examine the characteristics of the data objects that are available within an enterprise environment. In the proposed context definition, each data object (e.g. documents, email, etc.) is represented as a vector of a potentially large number of features. These features encode several properties of the data; the following are the most important: • Meta data about the application taking part in the event, email metadata, document metadata • Social graph of people, organizations, roles, social relations, entities in the documents • Terms from documents such as bag of words, named entities, concepts, annotations • Temporal information such as absolute and relative time, day of the week, part of the day, seasons • Relational information from ontologies or extracted relationships The underlying data structure for the input data is defined in a general way to capture the diversity of input data-sources, to capture temporal dynamics of data, to

134

M. Grobelnik et al.

enable automatic building of models, to be guided by users’ suggestions if available and, the last but not the least, to be scalable. The data structure we use to support the above objectives is a dynamic network with extra information on nodes and links as detailed in the description of the TNT store (Grobelnik et al. 2009).

7.3.2

Modelling

When considering methods for mitigating information overload of knowledge workers, a common approach that is considered is partitioning the space of information objects into several contexts. For our purposes, we define each context as a grouping of information or data objects for a particular need. We refer to this grouping as a context model. A knowledge worker can resort to manual context model definition or modeling methods, based on knowledge management tools. In an actual enterprise setting, the effort required for manual context model definition may often outweigh the benefits provided by partitioning information resources in contexts. To lower the barrier to entry to exploiting the benefits of contextual assistance applications, we can also consider using machine learning methods. More formally, we define a context model as a function being in the form for classification Contexti ¼ ContextModel(DataObjectj), or in a form for membership queries Belonging ¼ ContextModel(Contexti, DataObjectj), or in a form of a scoring function BelongingScore ¼ ContextModel(Contexti, DataObjectj), where DataObjectj is in our case data on TNT event. As already described, we assume that ContextModel can be • Trained automatically from pre-labeled data (supervised learning, e.g. classification algorithms like SVM) • Trained semi-automatically from partially labeled data in user interactive processes (semi-supervised learning, e.g. active learning algorithms like uncertainty sampling) • Discovered from unlabeled data (unsupervised learning, e.g. clustering algorithms like K-means) • Defined manually, for instance as a set of rules Different approaches can be used that explore the trade-offs on varying amounts of control that we allow the user to have over the context modeling process versus the amount of modeling effort required, as well as describing possible design decisions for developing solutions based on context models.

7.3.3

Deployment

Once we obtain an appropriate context model, we can deploy it for supporting the user in her activity. When the context model is available, machine learning techniques can be used to detect the user’s current contexts. Once the knowledge

7 Machine Learning Techniques for Understanding Context and Process

135

worker starts doing something unrelated to his current context, for instance opening a document related to another project, a shift is detected and the system may suggest a switch to a different context – one which better reflects the user’s recent activity. If the user then accepts this switch, her workspace is then put in another context. There are several key points that should be addressed in the whole process of context discovery and detection to make this functionality more usable. First, experience suggests that users expected tightly integrated top-down and bottom-up context definition, meaning that all information that they supplied to the system should be also integrated in the discovery process. Therefore, newly discovered contexts take into account all previous definitions and associations of contexts, to avoid suggestion of a new context very similar to some existing one. This aspect led us to improve on scalable online semi-supervised clustering algorithms which we applied to context mining. Second, we found that correctness of context detection was critical to knowledge workers, as false positive suggestions disturb their workflow – an issue we wanted to avoid in the first place. As it turns out, when a user associates (or does not associate) a resource with a context, it means much more than a user accessing the information resource when in that particular context. Therefore, fully supervised models are now used for context switch detection. In terms of user involvement, this means that upon a successful context discovery, the user is presented with a list of possible resources, out of which he selects the ones which are relevant for learning a model for that context. To summarize – for context discovery, which has a more exploratory nature, semi-supervised methods are very practical in terms of suggesting interesting relevant contexts with very little manual work. However, when actually supporting knowledge workers in real-time by suggesting context switches (context detection), highly accurate methods with stricter supervision are crucial.

7.4

Example Application: Context Mining on Emails

As a demonstration of context mining let us consider the domain of emails. In the current technological era, emails definitely play a big part in our everyday life. A May 2009 report by a research company The Radicati Group (Radicati 2009) estimates that there were 1.4 billion email users in 2009 and the number is expected to rise to 1.9 billion by 2013. The same source also suggests that there are 247 billion emails sent each day (notice that the majority of these emails are spam which is automatically blocked by spam blocker) and predicts that the traffic will double to 507 billion emails per day by 2013. These predictions are definitely concerning, since people are already overloaded with emails that they have to process, organize and make sense of. Despite email’s popularity, email clients unfortunately have not changed significantly since the beginnings of email in 1970s and still provide only the basic functionality. The user interface of a state-of-the-art email client, such as Microsoft Outlook 2010, displays a list of email folders on the user’s account, a list of emails

136

M. Grobelnik et al.

and a reading pane. Email clients typically allow the user to sort the list of emails by different criteria, such as the date or sender of the email, but there are no ways to display emails related to a specific context. If the user would like, for example, to see a list of emails that he recently exchanged with other partners on a certain project then he basically has two options. He can either search the whole list of emails and filter out irrelevant emails or he can create and maintain a special email folder where he puts all emails related to that group of people. Both options are very inefficient since they require the user to do all the work manually. To help users be more efficient when handling emails we developed an add-in for Microsoft Outlook called Contextify (Leban and Grobelnik 2010). It is intended for heavy email users who receive tens of emails per day and possibly work on several projects simultaneously. The main features that are currently supported and will be described are: display of information related to the currently selected email, social network visualization, visualization of discussion threads, contact identity management, recipient suggestion, Facebook and LinkedIn integration, people and email tagging, and automatic folder suggestion. Contextify supports Microsoft Outlook 2007 and 2010 and is freely available at http:// contextify.net.

7.4.1

Displaying Contextual Information in the Contextify Sidebar

The Contextify add-in displays information in different windows. One of the windows is the Contextify sidebar which is placed at the right side of Microsoft Outlook, next to the email list and the reading pane. Examples of the sidebar are displayed in Fig. 7.2. Information in the sidebar is updated each time the user selects a new email and displays content related to the sender of the currently selected email. The top of the sidebar shows sender’s personal information (Marko Grobelnik in Fig. 7.2) such as phone numbers, job position, address, photo, etc. The main part of the sidebar contains a tab control that displays recent emails sent to or from this person and information extracted from these emails. The first tab in the tab control contains the list of recent emails (see Fig. 7.2a). For each email we display the sender’s name, the email’s subject and a short snippet of the email body. For emails that are a part of a thread we also display a number indicating the number of emails in the thread. If the user would like to read the whole thread, he can select “Show Thread”option from the popup menu and the content of the whole thread will slide into view. Below the list of emails is also a tag cloud displaying the keywords extracted from the content of the displayed emails. These keywords can help us to quickly recognize what are the topics discussed in the emails. The other three tabs in the tab control display information extracted from the emails displayed in the first tab. The second tab in the control (see Fig. 7.2b)

7 Machine Learning Techniques for Understanding Context and Process

(a) related e-mails

(c) social networks

(d) web links

137

(b) attachments

(e) …when searching

Fig. 7.2 Examples of the Contextify sidebar showing the list of related emails (a), attachments (b), social network (c) and web links (d). Contextify helping the user when performing a query searching on the fly while the user is typing (e)

138

M. Grobelnik et al.

displays the attachments exchanged in the emails. When different people collaborate on a document they often exchange it several times while working on it. To be able to easily see the whole history of a document, Contextify groups files with the same filename and displays them all in the same sub-tree. Each attachment can be opened or saved by clicking it. The third tab (see Fig. 7.2c) displays people who are participating in the displayed emails. People are grouped based on their company which is deduced from, e.g., e-mail address or LinkedIn account (see Sect. 7.4.4). Clicking a person updates the sidebar with contextual information regarding this person. The last tab in the control displays (see Fig. 7.2d) the web links that were exchanged in the emails. The Contextify sidebar also provides search capabilities as shown in Fig. 7.2e. When the user enters the query in the sidebar’s search box, emails that match the query are found and information extracted from these emails is displayed in the tab control. Contextify currently supports three types of queries. The first type is the person query where we search for information related to a particular contact (this type of query is also performed each time we select a new email in Outlook). The second type is the keyword query where we display information about emails that contain all keywords that the user specified. The last type of query is a tag query. The user is able to define custom tags and assign them to specific contacts. An example where this can be especially useful is when the user would like to be able to see emails from all people who work on a particular project. In such cases a tag with the project name could be created and assigned to the members of the project. When the user then performs a tag search, emails from all the members would be displayed in the sidebar. In the examples described we determined the to-be-displayed contextual information based on the contact names, tags or search keywords. Alternatively, we could also use similarity measures or machine learning techniques to find related emails. Imagine, for example, that we are a person providing customer support. Each day we receive tens of questions regarding the use of different features of our product and we have to provide answers to these questions. Since it is likely that different people have similar questions we can use answers to old questions at least as a template for answering new questions. In such a scenario we could use a similarity measure (such as the cosine similarity) and compare a new question with the previous ones. The computed similarity could be used to rank the questions and the most similar questions could be listed in the sidebar together with the provided answer. Such contextualization would be extremely useful for the user as it would save him countless hours of manually searching through the emails.

7.4.2

Advanced Searching and Filtering of Conversations

More advanced search and visualization functionality is provided in the Contextify Dialog. The user can use the search box to specify a complex query consisting of a combination of person names, keywords and tag names. Emails that match the

7 Machine Learning Techniques for Understanding Context and Process

139

query are then displayed and grouped into threads based on the email’s subject. Along with the individual emails in the thread we also extract and display keywords for each thread which makes it easy to identify the content of the thread. An example of the Contextify Dialog is displayed in Fig. 7.3. The bottom left part of the dialog displays email activity (for the given query) over time. Each bar represents the number of emails received in a particular time span. The visualization is interactive – the user can select a subset of bars to display only those emails that were sent in the selected time period. The right side of the dialog contains a tab control. The first tab displays the social network of people who participate in the displayed emails. Nodes of the graph represent people while the edges indicate that there were emails exchanged between the two connected persons. Font size and color is also used to indicate the intensity of communication – people who sent more emails have nodes displayed using a larger font and the darkness of the edge between two persons corresponds to the number of exchanged emails between them. This helps to quickly identify who are the main participants in the discussions and who they frequently communicate with. The social network is also interactive. By selecting a contact all emails from that contact are highlighted in the list of emails. By double-clicking a contact you can even hide all email threads where the contact is not participating.

Fig. 7.3 Contextify Dialog where a search was performed using a contact’s name. Since Marko is selected in the social graph all emails from him are highlighted in the list of emails

140

7.4.3

M. Grobelnik et al.

Visualization of Discussion Threads

When we collaborate with a group of people it is common to have long email discussions on a particular subject, often consisting of tens of emails. Such discussions are typically very difficult to follow since it is hard to see who replied to which email. What is even worse is that such discussions often have several backchannels in which different subgroups of people are participating. To help users more easily understand and follow the discussions we provide a thread visualization feature. It is displayed in the Thread View tab in the Contextify dialog. As mentioned, Contextify treats emails that have the same subject (after removing prefixes such as “Re:”, “Fwd:”) as belonging to the same discussion thread. When a message thread is selected, emails in the thread are displayed as boxes in a flow diagram. The diagram starts at the top left corner with the first email in the thread. The reply to an email is typically drawn under the previous email. Exceptions to this rule are emails that start a new backchannel – either by adding new participants or by removing some existing ones. In such cases, a new vertical branch is created and all following emails with this specific group of participants are then displayed in this branch. Boxes for emails contain the sender’s name, attachments if they exist and a snippet of the email’s content. For emails that started a new backchannel we also list the contacts that were added (in green color with a “+” sign), contacts that were removed (in red color with a “” sign) and the existing contacts that are kept. In Fig. 7.4a we see an example of a visualization of a relatively simple discussion with 13 emails. We can see that the discussion was started by Tadej Sˇtajner who sent an email to Gregor Leban. Gregor replied and on the next day also sent an email to Marko Grobelnik in which he removed Tadej from the discussion (hence the new branch). All emails between Gregor and Marko are then displayed in the second branch. For threads that are very complex with many backchannels, such as the one in Fig. 7.4b, you can also use the zooming feature to get an overview of the discussion.

7.4.4

Identity Management

Most people own several email accounts. When searching for emails from a specific person it is therefore important that we are able to show emails from all accounts. In order to be able to do that, Contextify provides a Contact Management Dialog where different email accounts that belong to the same person can be merged together. An example of the dialog is displayed in Fig. 7.5. Merging of contacts can be done manually or automatically. For automatic merging Contextify uses the contact’s email address and name as provided in the emails. This information is first preprocessed where we remove all non-letter characters and try to obtain words that represent the contact’s name and surname. A matching algorithm is then used that identifies contacts that are similar enough

7 Machine Learning Techniques for Understanding Context and Process

141

a

Thread visualization with 13 e-mails in the thread

b

Thread visualization with 31 e-mails in the thread

Fig. 7.4 Two examples of the thread visualization; (a) a simple thread with 13 emails and (b) a longer thread with 31 emails and many backchannels. The visualization in part (b) is zoomed-out in order to provide a general overview of the thread

142

M. Grobelnik et al.

Fig. 7.5 The Contact Management Dialog that can be used to manage information about contacts and companies

and should be merged. A more advanced approach for merging contacts would be to also apply the analysis of similarities of social networks. If two email addresses belong to the same person then it is likely that both email addresses will be used to communicate with a specific group of people. To obtain additional information about the contacts, Contextify can also connect to user’s Facebook and LinkedIn accounts. This information is then displayed in the top of the sidebar. Along with contact information, Contextify also manages information about the companies associated with the contacts. When several contacts specify on LinkedIn an association with the same company, Contextify tries to induce which domain is associated with the company by inspecting the email accounts of these contacts. If, for example, five of my contacts specify on LinkedIn an association with Jozˇef Stefan Institute, I can discover from their email accounts that the associated domain is most likely ijs.si. Using this information we can now associate with Jozˇef Stefan Institute (JSI) also other contacts with email accounts from this domain, even if they don’t manually specify this association. Having contacts associated with companies is useful because company names represent special tags that can be used when performing a search. Searching for the JSI tag in the Contextify dialog, for example, displays message threads that contain people who work at Jozˇef Stefan Institute (JSI).

7 Machine Learning Techniques for Understanding Context and Process

143

The user can use the Contact Management Dialog also to create custom tags and associate them with specific contacts. These tags can be then used when performing a search in the sidebar or the Contextify Dialog.

7.4.5

Recipient and Folder Suggestion

Another nice example of contextualization provided in Contextify is the recipient suggestion feature. When composing a new email, Contextify displays an additional sidebar in the email composition window. After the user adds a recipient we list in the sidebar other contacts that have in past emails frequently appeared together with the added recipient. By clicking on any contact in the sidebar, the contact is added as an additional recipient. The list of suggested recipients is then updated and shows also contacts who appeared in emails with the newly added recipient. The list is updated each time a new recipient is added and is sorted so that the contacts that will be most likely added next are placed at the top of the list. An example of the sidebar is shown in Fig. 7.6.

Fig. 7.6 A demonstration of the contact suggestion feature. After we added Marko as the recipient, Contextify automatically lists other contacts that we are also likely to add as recipients

144

M. Grobelnik et al.

A new feature that we are currently implementing and which relies heavily on machine learning methods is folder suggestion. People often organize emails into folders. Moving each email individually into the corresponding folder can be very time consuming and we would like to automate this process. In order to be able to predict to which folder an email should be moved we need to build a classification model. There are many possible learning features for building the model. People often place emails based on the participants in the email; therefore one of the most relevant features will definitely be the sender and all the recipients of the email. A crucial feature will also be the email’s subject – not only because of the content of the subject but also because emails that belong to the same thread should most likely be in the same folder. Folder prediction could also be based on the content of the email. In this case we would use the current folder structure and treat the content of all emails in one folder as one large document. We could then apply the cosine similarity measure to find to which document the current email is most similar and move the email to the corresponding folder. After representing e-mails with features we could use any of the classification methods to build a classification model. The choice of the model depends on our goals. If we are primarily interested in the accuracy of the predictions, we would most likely achieve best results by applying the SVM algorithm. If we also need to provide the user with the explanation for our prediction, then methods such as if-then rules or decision trees should be preferred.

References Banerjee A, Basu S, Merugu S (2007) Multi-way clustering on relation graphs. SDM SIAM, Minneapolis, MN April 26–28, pp 145–156 Basu S, Davidson I, Wagstaff KL (2008) Constrained clustering: advances in algorithms, theory, and applications. Data mining and knowledge discovery series. Chapman and Hall/CRC, CRC Press, Florida, New York Davidson I, Ravi S (2005) Clustering with constraints: feasibility issues and the k-means algorithm. In: Proceedings of SDM, Newport Beach, CA Dong G, Pei J (2007) Sequence data mining. Springer-Verlag New York Inc., New York Dubey A, Bhattacharya I, Godbole S (2010) A cluster-level semi-supervision model for interactive clustering. In: Proceedings of ECML PKDD 2010, Lecture Notes in AI, Springer-Verleg, Berlin/Heidelberg ECAI (2006) Workshop on context representation and reasoning. http://sra.itc.it/events/crr06, Accessed date 5 Aug 2011 Grobelnik M, Mladenic´ D, Ferlezˇ J (2009) Probabilistic temporal process model for knowledge processes: handling a stream of linked text. In: Proceedings of the 12th international conference information society – IS 2009, vol A. Institut Jozˇef Stefan, Ljubljana, pp 222–227 Guo J, Sun C (2003) Context representation, transformation and comparison for ad hoc product data exchange. ACM DocEng 2003: proceedings of the 2003 ACM symposium on document engineering, ACM, Grenoble, France, New York, U.S., pp 121–130 Jacquemont S, Jacquenet F, Sebban M (2009) Mining probabilistic automata: a statistical view of sequential pattern mining. Machine Learning 75(1):91–127

7 Machine Learning Techniques for Understanding Context and Process

145

Leban G, Grobelnik M (2010) Displaying email-related contextual information using Contextify. In: Proceeding of ISWC 2010, LNCS, Springer, Heidelberg, pp 181–184 Mitchell TM (1997) Machine learning. The McGraw-Hill Companies, Inc., New York Mitchell TM (2006) The discipline of machine learning. CMU-ML-06-108 July 2006, School of Computer Science, Carnegie Mellon University, Pittsburgh Mitchell TM (2009) Mining our reality. Science 326(5960):1644–1645, http://www.sciencemag. org/content/326/5960/1644.short Mladenic´ D (2006) Feature selection for dimensionality reduction. In: Subspace, latent structure and feature selection: statistical and optimization perspectives workshop, vol 3940, Lecture notes in computer science. Springer, Berlin, Heidelberg, Hershey, USA, pp 84–102 Mladenic´ D (2007) Text mining: machine learning on document. In: Encyclopedia of data warehousing and mining. Hershey [etc.], Idea Group Reference, cop., pp 1109–1112 Sˇtajner T, Mladenic´ D, Grobelnik M (2010) Exploring contexts and actions in knowledge processes. Workshop on context, information and ontologies, Lisbon The Radicati Group Releases, Email statistics report, 2009–2013. http://www.radicati.com/ VUT – Vienna University of Technology, Austria, 2007, D2.2 design and proof-of-concept implementation of the inContext context model version 1 Wagstaff K, Cardie C (2000) Clustering with instance-level constraints. In: Proceedings of ICML 2000, Morgan Kaufmann, Massachusetts

Part III

Applying and Validating the ACTIVE Technologies

8

Increasing Productivity in the Customer-Facing Environment Ian Thurlow, John Davies, Jia-Yan Gu, Tom B€osser, Elke-Maria Melchior, and Paul Warren

8.1

Introduction

The objective of this case study was to evaluate novel information technology from the ACTIVE project (Simperl et al. 2010) with people working in a demanding customer-facing environment. The case study took place in BT, a major global provider of telecommunications services. Specifically, our trialists were from the sales community (salespeople and associated technical and product specialists) of a division focussed on providing ICT solutions to the UK enterprise market. Trialists were distributed across a wide geographical area. Indeed, one of their problems was that they were not often able to meet face to face to share knowledge.

8.2

Users and User Requirements

We started by talking to the senior managers responsible for our trialists. In general, as managers, they wanted better knowledge worker productivity. Specifically, they wanted to shorten the time to create sales proposals and to improve their quality.

I. Thurlow (*) • J. Davies • J.-Y. Gu British Telecommunications plc., Orion G/11, Ipswich, IP5 3RE, Adastral Park, United Kingdom e-mail: [email protected]; [email protected]; [email protected] T. B€osser • E.-M. Melchior kea-pro, Tal, Spiringen CH-6464, Switzerland e-mail: [email protected]; [email protected] P. Warren Eurescom GmbH, Wieblinger Weg 19/4, D-69123 Heidelberg, Germany e-mail: [email protected] P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5_8, # Springer-Verlag Berlin Heidelberg 2011

149

150

I. Thurlow et al.

They saw information reuse through knowledge sharing as an important way to achieve this. Talking to the senior managers also helped us to further develop our initial intuition of what information-related problems our trialists were confronted with. Our task then was to confirm and refine that intuition with the trialists themselves. We were working with two groups; a large group interacting directly with customers and a small team responsible for coordinating creation of the more complex customer proposals. Although their requirements were related, we needed to deal with each group separately. Both groups did share one characteristic, along with all BT people. They both used the standard Microsoft applications, in particular Outlook, Word, Excel and PowerPoint. It was essential therefore that, if ACTIVE was to be used, it worked with and enhanced these applications. This characteristic was shared with the Accenture case study described in Chap. 9 and was a major reason for the inclusion of these applications into the ACTIVE Knowledge Workspace (AKWS) as described in Chap. 5.

8.2.1

Working with Customers

The larger group consisted of sales consultants and their managers, and technical specialists. The sales consultants were responsible for groups of customers. Some had responsibility for hundreds of customers. These were generally desk-based. The majority were responsible for tens of customers. Members of this group often spent as much as 3 days a week out of their offices with customers. The technical specialists had expertise in particular product ranges, and were used to provide the technical input to business proposals. Our hypothesis was that, whilst working at their desks, these people would all frequently switch their focus from one task to another, as they responded to different customer requirements. Two techniques were used initially to test this hypothesis and to generally gain an understanding of how these people interacted with information, the problems they faced in using information systems, and what they needed from such systems. Firstly, a number of semi-structured interviews were held; some one to one, some in small groups; some face to face; some by audio conference. Secondly, we observed a few of our potential trialists over a period of around two hours. We did this remotely. Specifically, we observed our subjects’ screens and how they interacted with information via a Microsoft LiveMeeting session. We used Microsoft Communicator to provide a separate audio channel for listening to our subjects’ telephone conversations. We also used this audio channel for occasionally asking questions to seek clarification, e.g. as to why certain on-screen actions were being taken. Initially this procedure was adopted to save time, bearing in mind the wide geographical spread of our trialists. However we believed that the technique had the further advantage of being less intrusive than had we been physically present. The subject knew that he or she was being listened to and observed, of course, but

8 Increasing Productivity in the Customer-Facing Environment

151

was potentially not so constantly conscious of this as would have been the case if there had been an observer physically present. We were not able to test this hypothesis, and this was not our purpose, but in any case we believed we had a very effective mode of observing behavior. These techniques gave rise to a number of conclusions. The subjects’ work was often driven by email. That is to say, there was heavy use of email; and incoming emails, along with telephone calls, caused people to switch tasks. In effect, people were continuously switching their task context. Despite this, and despite a significant use of the telephone, some of our subjects reported problems arising from being isolated geographically from their colleagues. As already noted, opportunities to meet and share knowledge were very rare. A significant amount of time was spent using BT systems, e.g. CRM systems to record interaction with customers. In addition, there was a great deal of use of spreadsheets. The effect of multiple systems was to necessitate user processes involving cutting and pasting from one system or application to another. Effectively, users developed their own processes to accommodate this way of working.

8.2.2

Building Customer Proposals

Our understanding of the proposal creation process and the requirements of the bid unit who coordinate this process was built up through a number of face to face meetings. Whilst straightforward proposals are put together by individual sales consultants, working with their personally-developed network of colleagues, the production of more complex proposals is coordinated by a bid unit of five people. Typically the bid unit receives an invitation to tender which contains often many tens of questions. The majority of these questions can be answered quickly by adapting text from previous proposals. There then remains a small number of questions which are much harder to answer. The bid team then seeks assistance from relevant technical specialists, who provide text for inclusion in the proposal. This approach gives rise in particular to two problems. Firstly, in the information-gathering phase, members of the bid unit need to be sure they are accessing up-to-date information. Secondly, the fact that text has been written by a variety of different authors creates inconsistencies in the proposals which significantly affect their quality. Such inconsistency can be at the level both of style, and also of fact. Even where a factual inconsistency does not materially affect the solution being offered to the customer, it undermines that customer’s confidence. An example might be a reference to how many similar solutions have been offered in the past. A difference of one or two in the number quoted in different parts of the proposal might not be material, but serves to reduce the quality of the document.

152

8.3 8.3.1

I. Thurlow et al.

Gaining Feedback Feedback from the “Mock-Ups”

The techniques described in Sect. 8.2.1 were used during the first year of the project to give us an understanding of our trialists’ requirements. At the same time, working with our partners in the ACTIVE project, we were able to gain a good understanding of what functionality could be made available in our case study, based on the technology being developed in ACTIVE. At this stage most of this functionality was not yet available, but we wanted to get feedback from the trialists. In particular, we wanted to be sure that the key requirements of the user community were being met and to refine these requirements in the light of feedback. To do this, we constructed a number of PowerPoint “mock-ups” to illustrate the basic functionality. When presenting these to our trialists we stressed that we were not concerned with particular questions of style, e.g. the use of icons, menus, fonts, etc. At this stage we were interested in their feedback to the proposed functionality. The mock-ups chiefly reflected the more general requirements of our larger group of trialists, as described in Sect. 8.2.1. However, we did also show them to the bid unit for their feedback. Apart from their own, very specific, requirements, the bid unit shared with the other trialists the generic requirement to mitigate the effects of information overload. These mock-ups featured the following areas of functionality: • Tagging, and the ability to search against a combination of tags and contexts, i.e. for information objects tagged in a certain way and associated with a certain context. • Contextualised information delivery, along with the ability to create contexts, select a particular context, and associate information objects with particular contexts, as described in Chap 5. We also described the “bottom-up” features, i.e. the ability to discover new contexts, to automatically detect a context switch, and to automatically associate information objects with a context. • Process recording, as described in Chap 6. • A context-sensitive factbook. This was to be an application which could store information, organised by particular contexts. It was motivated by the observation that triallists were frequently copying information from one application to another. Sometimes this was done by cutting and pasting. At other times, the information was manually re-keyed. Some people reported that they would make a written note of information to be re-keyed, keeping a piece of paper or notepad on their desk for just that purpose. The factbook was intended to be an electronic version of these written notes. We obtained very positive feedback to the first two of these. Moreover, there was also a positive response to the use of context for knowledge-sharing. Specifically, if colleagues share a context, e.g. relating to a particular customer, then information placed on a shared server by one, and associated with that context, would be

8 Increasing Productivity in the Customer-Facing Environment

153

available for them all to use. Another advantage of our implementation of context became apparent during the project. A number of triallists commented positively on the ability to associate an information object with more than one context. They contrasted this favourably with the single folder limitation of their current computer filing system. The response to our ideas on process recording were, in general, less enthusiastic. This may have been a problem in presentation. One individual commented that the system “feels like I need to change the way I work to fit the system”. This, of course, was not the objective; the system is designed to record how people work and help them work as they want to work. We still felt that the technology was useful, and it was developed as described in Chap. 6. However, as explained later, it was not evaluated with our trialist group because of lack of time. The response to the factbook was not at all favourable. This seems chiefly to be because it was seen as another application, and individuals were already working with a large number of applications; they felt they didn’t need another. As a result, it was decided not to proceed with the factbook. We also discussed and obtained feedback about a number of general issues. One question was whether ACTIVE functionality should be on the desktop or integrated into applications. There were mixed opinions on this. One comment was that “integration into working tools will help uptake”. In fact, both approaches have been adopted; a taskbar is present on the desktop and a toolbar integrated into the common Microsoft applications. The issue of trust arose with regard to the sharing of information. One person asked “how do I know the information others have shared is correct?” Our tools make clear the provenance of information; over time people build up confidence in information from particular colleagues. The view was also expressed that accurate search to find timely and relevant information is a key determinant of whether a knowledge management system is used or not. Clearly our system needed to provide high quality search.

8.3.2

Offline Working

A final requirement emerged at a later stage of the project. As we have already noted, many of our triallists spent a great deal of time, often 3 days out of 5, out of the office visiting customers. The original concept of the AKWS was that it would employ a client–server architecture and, at least as originally developed, the client functionality would depend on connection to a corporate server running, e.g., the machine learning applications. It became apparent that, if many of these highly mobile people were to use the ACTIVE functionality, they needed certain basic aspects of that functionality to be available at all times. As an example, one person wanted to use the tagging feature instead of the normal hierarchical file structure. It was essential, therefore, that this feature was still available when disconnected from the corporate network, as was often the case when our triallists were on customer premises or travelling to customers.

154

I. Thurlow et al.

As a result, our colleagues in the project developed an offline version of the client–server software. When the client was connected to the server, the user had all the AKWS functionality available to him. From the end user’s perspective the Workspace operations in offline mode are performed in the same way as in online mode. The ACTIVE Taskbar and all ACTIVated Office applications can be used, but the user is notified of working in the offline mode and Workspace operations are performed only on the resources from the Local Workspace. Resource replication from the Enterprise Workspace to the Local Workspace works as follows: whenever a Workspace resource is created, read or updated, it is automatically replicated to both the Enterprise and the Local Workspace. This means that when a user goes offline he will have all Workspace resources he has been using so far in his Local Workspace. In addition, the user can specify all Workspace resources he would like to replicate explicitly and perform the replication to the Local Workspace before he is going offline. While working offline, only the Local Workspace will be updated with the changes the user is making and when returning online, a synchronization of all new and modified resources he made locally will be made to the Enterprise Workspace automatically. This offline version was able to be deployed with those people who were frequently out of the office.

8.4

Deploying the AKWS

Within the ACTIVE project there was inevitably only limited time for deployment and evaluation of the project functionality. We decided, therefore, to concentrate on those aspects of the AKWS which previous feedback told us were most relevant to our triallists. In particularly, we did not want to overwhelm our users with a large range of new features. Our aim was to introduce to the users those features we believed would be valuable to them, and to evaluate those features through user feedback. Specifically, for our evaluation activity, described in Sect. 8.6.1, we included: • Information filtering by context, in particular in Microsoft Outlook, Word, Excel, PowerPoint, Internet Explorer and File Explorer. Combined with this was the ability for users to create contexts, set their current contexts and associate information objects with a particular context, as described in Chap. 5. With this we included the ability, supported by machine-learning, to automatically discover contexts, detect potential context switches, and associate information objects with contexts. We also provided users with the ContextVisualizer, again as described in Chap. 5, because we received very positive feedback when we initially demonstrated this tool. • Tagging, and the ability to search on a combination of tags and context. In particular, the system is able to recommend tags to the user, as illustrated in Fig. 8.1. These recommendations are made partly on the basis of the contents of a file and partly on the basis of what tags have been used by the same or other

8 Increasing Productivity in the Customer-Facing Environment

155

Fig. 8.1 Suggested tags

users to tag similar files. Here, similarity is based on the information retrieval concept of cosine similarity (Hiemstra 2009). It was believed that automatic tag recommendations bring two advantages. Firstly, this feature may overcome some people’s reluctance to tag; caused in part by simply not being able to think of a tag to use. Secondly, tag recommendation may help the user, or more particularly groups of users, to converge on a relatively small set of tags, rather than creating several tags for the same concept. Of course, a counter-argument is that this feature may limit the user’s creativity in devising new descriptive tags. • Access to the AKWS management portal. This provides the facility for users, or an administrator on their behalf, to set their profiles. In particular, settings exist to determine whether a user should approve the discovery of new contexts, or whether new contexts can be created automatically; similarly whether users need to approve a context switch, or whether it should just go ahead automatically; and whether the tag suggestion facility should be initiated every time a file is closed. The profile options are shown in Fig. 8.2.

8.5

Creating Better Business Proposals

Sect. 8.2.2 described the work of the bid unit. Their requirement was to create customer proposals more quickly and with greater quality. The bid unit do not use a content management system; rather the library of proposals are on a shared server

156

I. Thurlow et al.

Fig. 8.2 ACTIVE profile settings

and are searched and browsed with File Explorer. An Access database is used to store key information about each bid. Moreover, once a team was brought together to create a proposal, sharing of information was by email and exchange of Word files; no specifically collaborative tools were used. The Semantic MediaWiki was seen as an excellent solution. The semantic features were seen as important to enable the bid team to locate the best previous proposals. The basic wiki features were seen as valuable to encourage collaboration between members of the bid unit and the technical specialists. We also wanted to enhance the way in which the bid team obtained solutions to the questions they were unable to answer themselves. To do this we used a MediaWiki extension which enables the export of particular wiki fields to RSS. Technical specialists throughout BT were encouraged to subscribe to this RSS feed, which was used to disseminate these questions.

8.5.1

Storing and Accessing Information on the SMW

The SMW was not used to create whole proposals. Its editing features were not regarded as adequate for this task. Instead, it was used to store key information about proposals, customers and products; and also to capture the main requirements set by customers and create the response solutions to these in the executive summary which is a decisive part of the proposal. Figure 8.3 shows an example of a bid proposal page in the SMW. The semantic links between pages describing proposals, customers, products, and also the solutions to questions posed to technical specialists creates a knowledge base which can be searched semantically. Inline queries allow users to ask questions such as which proposals use a particular product set; or which customer requirements have been evaluated before in a particular industry sector. Figure 8.4 shows proposals that offer mobile products, displaying some details that can be used to sort the items and Fig. 8.5 shows questions posed to technical specialists that relate to a particular industry sector.

8 Increasing Productivity in the Customer-Facing Environment

157

Fig. 8.3 The SMW, showing the key details of a bid proposal

Fig. 8.4 The SMW, showing proposals offering mobile products

Fig. 8.5 The SMW, showing questions related to the education sector

When the knowledgebase is augmented with information about product hierarchies and relationships, then this becomes more powerful. For example, if a particular product name in the query is not known in the knowledgebase, then a

158

I. Thurlow et al.

semantically-related name might be known, e.g., a generalisation of the product or a related product. To support our users, we made use of a number of extensions to the MediaWiki and SMW. For example, one extension enabled us to import comma separated variable information into the SMW and associate its content with semantic properties across proposal, product and people pages. We used this to import bid proposal data from an access database that is constantly updated by the bid unit team during their normal day-to-day work functions; so collaboration in the wiki is based around this key information. For example, questions created in the wiki to include in RSS feeds seen by technical specialists are associated with the relevant proposals and in turn, with its semantic properties. These semantic property values across the wiki are leveraged by using another extension to provide an improved facility for searching, including facetted search. Where a user was also using the AKWS, connection between the SMW and AKWS meant that context could be used as one of the facets of the search. Figure 8.6 shows the facetted search interface that allows users to find proposals based on keywords, bid type, bid status, product area, contract value, free form tags created by users in the wiki, and AKWS context. Where a user makes a facet selection, the facetted search options automatically present the relevant subset of search criteria powered by semantic properties in the wiki to align with the current selection and allow the user to further refine their search. Figure 8.7 shows the extension used for finding customers that are similar based on their industry sector and size, both in terms of its workforce and its number of sites where the user can then make a customer selection and view the bid proposals associated with that customer. Another extension visualises bid proposals and associated community questions in timeline formats so that users can view the preparation time for bid proposals and the bid proposals that are cancelled or still require submission. This offers another way for users to find proposals based on a time dimension where the user can make a selection and view the proposal page and also gauge the overall volume and completion rate of bid proposals. Figure 8.8 shows an example of this usage. Calendar extensions were used in the wiki for quick access to bid proposals and questions month by month. Other extensions that were used in the wiki include implementing header tabs on pages that contained large amounts of information, whose content could also be clearly categorised e.g. in Fig. 8.3 bid proposal pages have separated key details from post-bid review data but the tabs still allow fast access and browsing between this information compared to scrolling on a single page. Another extension allowed users to log in to the wiki using their BT identification details that are used for other systems and tools so reducing any barriers to using the wiki and maintaining consistency with other enterprise systems that users may be familiar with. Another extension offered enhanced capability for the wiki to evaluate conditions and display information dependent on the result. This was used throughout the wiki for various purposes that range from testing if an editable field contained information and prompting the user to add information if tested false, to testing whether a person belonged to a team and showing the relevant team page

8 Increasing Productivity in the Customer-Facing Environment

159

Fig. 8.6 The SMW, showing the facetted search for bid proposals

Fig. 8.7 The SMW, showing the facetted search for customers

if tested true. This capability ensured that correct page links were displayed and a user was able to view a link to further related information if this exists, maximising the value of information in the wiki.

160

I. Thurlow et al.

Fig. 8.8 The SMW, showing timeline visualisation of bid proposals

The Semantic Forms extension was used on every page in the wiki to present a consistent way of editing information on a wiki page, which is often compiled from multiple sources such as transcluded information from other pages using templates and also displays values that change dependent on the evaluation of a condition in the page source. It was important, therefore, to use forms to lower the barriers for users to add information to a page, protect the source and enable new data to be associated with semantic properties that can be used throughout the wiki.

8.5.2

Communicating with the Technical Specialists

In fact, we used a number of RSS feeds to pose the more difficult questions to the technical specialists. The specialists were invited to subscribe to particular feeds that contain questions associated with the latest bid proposals that were being prepared by the bid unit team with varying levels of urgency. Each question contains a link to the relevant wiki page where a specialist can contribute their responses through a form to minimise the number of steps that a user needs to participate and make a valuable response. This method of interaction with the wiki used the RSS reader facility in MS Outlook that is regularly used by the sales team and reduces the barrier of uptake by integrating the RSS feed with software that is familiar to the users. Each RSS item can also be treated as an email item as well as the entire feed being shared via email through Outlook. Figure 8.9 shows a users inbox and the links that are available on each RSS feed item to make a response and view further detail such as related uploaded documents. An important issue here is that of motivation. Specifically, how do we encourage the specialists to subscribe to the RSS feeds in the first place, and then how do we

8 Increasing Productivity in the Customer-Facing Environment

161

Fig. 8.9 RSS feed of bid proposal questions to technical specialists

encourage them, when appropriate, to follow the link to the wiki and input their knowledge. In principle there is even the danger that the technology will encourage inaccurate responses from those who do not have the appropriate expertise; whereas in the previous approach bid unit members targeted those they believed to have the necessary knowledge.

8.6

User Tests and Field Trials

The development of AKWS and the Bid Unit Wiki was based on extensive consultation with users and testing of partial applications and prototypes. The results of these tests were numerous modifications of the application design and bug fixes which assured that the finally completed prototypes were accepted in the formal acceptance procedure of the BT bid unit. During the last months of the ACTIVE project we undertook an extensive evaluation exercise on all aspects of the case study. We wanted to understand how the users reacted to the technology; to what extent it suits their needs; how easy it is to use; and where there is scope for improvement. We also wanted to know whether the technology was helping to achieve the organisational goals, e.g., whether it was making its users more productive; and whether it was improving the quality of customer proposals, and the speed with which they could be written. At the more abstract, scientific level, we wanted to help answer some of the questions posed by the project. Specifically: • Did the use of applications which integrate lightweight ontologies and tagging offer measurable benefits to the management of corporate knowledge without offering significant user barriers?

162

I. Thurlow et al.

• Did the use of context help users cope with information overload, and make it easier to switch frequently between separate tasks, which many of them do frequently? Also, did the use of machine intelligence further support the users by discovering contexts, detecting context switching, and creating associations between information objects and contexts? We organised two separate field trials; one for the AKWS where we were working with the customer-facing people and their managers; and one for the SMW where we were working chiefly with the members of the bid unit, but also talking to those technical specialists who were receiving the RSS feeds. Our focus here was on three aspects of the ACTIVE technology: • The explicit (“top-down”) use of context by users. We wanted to know how useful they found it; how easily they appreciated the concept; and how they reacted to the user interface. • The use of machine intelligence to discover contexts, detect context switches and associate information objects with contexts, i.e. the “bottom-up” approach to context. Here the principal question was the effectiveness of the algorithms, i.e. how well did the results compare to the users’ own natural understanding of context. We were also interested, of course, in the user interface, e.g., how discovered contexts were presented to the user. • The use of tagging to describe information objects. Here again, we wanted to know how valuable users found the overall concept; how effective was the algorithm which suggested tags; and how people reacted to the user interface.

8.6.1

Developing a Mature Prototype of the AKWS

The first concern was to assure that the functionality of the AKWS is well adapted to the needs of the professional users for which it is intended. Although the needs and requirements were analyzed carefully, these constitute necessary, but not sufficient conditions for assuring the acceptance of the application by the prospective users. A series of iterations of design and testing was carried out, where increasingly complete and refined prototypes were developed and tested with appropriate user representatives and users. The results were used for identifying shortcomings of the current prototype specification and bugs, for refining the requirements for the application and for implementing the subsequent prototype version. Tests were firstly conducted with senior technical user representatives, then with experienced users, with representative groups of users, and finally in field tests to which the entire prospective user group (all members of the BT bid unit) and a number of further professionals at BT were invited. In this manner it was assured that the final application prototype corresponded firstly to the organizational requirements, and both to the functional requirements and the needs of the users.

8 Increasing Productivity in the Customer-Facing Environment

163

Major results of the tests of advanced prototypes with users and user representatives were significant modifications of the technical components to improve performance (response time), significant improvements of the way in which tags were recommended, and context detection and discovery was presented. Additional requirements were formulated based on early user experience, such as a re-design of the Task Pane and Task Wizard, and the ability to use the AKWS in an offline mode. The application passed the acceptance test by senior representatives of the BT bid unit, which was a defined condition for proceeding with the field test. As a summary, the application was regarded as sufficiently mature to ask the professional users to the BT bid unit to use the applications in their daily work, which requires a significant amount of engagement from each individual user.

8.6.1.1

User Effort Imposed by New Functionality

One concern of user representatives, and an important barrier for professional users when adopting new software applications, is the learning effort and the added continuous effort imposed on users. The functionality of the AKWS demands a certain amount of user intervention and response. Users have to tag, accept suggested context switches (aka context detection), accept discovered contexts, and associate documents with the new discovered contexts. Because it was recognized that for users this is a non-trivial added burden, an independent analysis was carried out. Under controlled conditions an instance of AKWS was installed and systematically populated with a set of data (documents and URLs). A number of test persons carried out defined tasks and the execution time was observed. The results indicate the time required to execute the various functions of the AKWS (Table 8.1). A function such as “Recommended tagging” requires a certain amount of time (significantly longer than the time to execute the operation for entering data), due to the need to read, make decisions, and select from the list of recommended tags. In contrast, context tagging (context association) is carried out much faster, compared to recommended tagging, provided that the user is in the context with which a document is associated. Otherwise a context switch is needed before context Table 8.1 Observed execution times for user tasks carried out with AKWS functionality Task type Mean time to perform task (s) Recommended tagging 00:55+ Context association 00:04 Context switch and context association 00:41 Context creation 00:34 Context switching 00:34 Search 00:36+ Discovered context 00:57+ Detected context 00:27

164

I. Thurlow et al.

association with the desired context can be performed and in this case the total time to perform context association is much higher. It is notable that using discovered contexts and responding appropriately is a tedious task and a lengthy procedure. In addition, analytic models of the user procedures were constructed (GOMS models (Card et al. 1983)). The results show in detail that AKWS functions add cognitive complexity to the tasks of users. In combination with the measures of execution times and the subjective assessments of the users this shows that the use of AKWS does not provide additional information to the user for free, but that a certain amount of investment is required by each user to learn to use new tools and functionality.

8.6.1.2

Field Tests of the AKWS and the Bid Unit Wiki

The objective of field tests is to provide conclusive evidence which shows that the new applications developed in ACTIVE can be used as intended, are accepted by the target users, and provide value for the user organization. The specific context of work of the target users of AKWS provides challenging conditions for conducting valid field tests: the bid unit members work at variable locations, mostly out of the office. Professional users do not follow prescribed work procedures, but adapt their work to the current tasks, context of work, but also their personal capabilities and preferences. This requires that flexible means to collect valid data remotely must be constructed. Thirty test persons were prepared to install and use AKWS. Of these 18 users supplied data which were sufficiently complete to be included in the analysis of data. The experimental design is a repeated measures design, where data were collected at different points in time from each user. Measures collected were – – – –

Subjective user quality of the application Objective performance measures and performance self-assessment by users Added value assessment of the specific functionality included in the AKWS Monitoring of the usage of the functionality, indicating acceptance

The test procedure started by giving demonstrations of the AKWS via Microsoft Live Meeting, and by inviting all members of the trialist community. The AKWS Client application was installed on users’ workstations. Each user received instructions for about one hour and was asked to familiarize with AKWS for about 3–5 days. During the test period of 3–5 weeks the users carried out their daily tasks using AKWS together with their standard tools, mostly MS-Office applications. User data were collected by means of a number of online questionnaires and user interviews after the users had experienced the technology for a number of weeks. We used proven and standardised instruments such as Software Usability Measurement Inventory (SUMI) (Kirakowski 1996, 1998) and focussed questionnaires and rating scales to assess the added value of the functionality in the AKWS and Bid Unit Wiki. In the AKWS we also used a user monitor to allow us to obtain

8 Increasing Productivity in the Customer-Facing Environment

165

additional information about the usage of the functionality of the AKWS by users. The events registered allow us to infer the acceptance and usage of the AKWS functionality in the user population. In addition, user data determined which further information would be collected from users. The objective was to assure that users were only requested to provide information about functions which they had actually used. As an example, if the user were presented with tag suggestions, the user monitor might be invoked to obtain the user’s feedback on the usefulness of the suggestions. The user monitor was designed so that the user was not queried too frequently, and only about those functions which he had used.

8.6.1.3

Results of AKWS Field Tests

The ratings of user tasks characteristics indicate that context switching, search, and information sharing is done frequently per day. Neither tagging nor editing and (re-) using macros seem to be frequent activities of these users. Quality of use assessment with SUMI. It is essential that the quality of use of AKWS, even though it is not a mature product in the same sense as the other tools used by the test users, is satisfactory. SUMI provides a standardized profile of the quality of use of AKWS. The results show that AKWS fulfils the quality of use requirements for the intended users, no single quality dimension stands out as negative. Ranking of features of the AKWS according to their usefulness. The test persons were asked to rank eight major new features of the AKWS according to their usefulness. The procedure forced the subjects to rank all features (no ties permitted), as shown in Table 8.2. The Kendall W statistic (W ¼ 0.22) indicates an acceptable degree of consistency between subjects. A test of significance of the rankings using the Friedman statistic yields an error probability of p < 0.01, i.e. the ranking sequence differs significantly from chance. The positive assessment of Manual Context Association, Context Filtering and Manual Context Switching are reflected in additional remarks recorded by users during the test, and by the frequency of manual context association and manual context switching event logs. Our hypothesis is that manual context association Table 8.2 Ranking of AKWS features according to usefulness for the users (18 subjects) Rank AKWS feature Mean rank 1 Context association 2.9 2 Context filtering 3.1 3 Manual context switching 3.6 4 Automatic context detection 4.6 5 Workspace search 4.8 6 Recommended tags 5.5 7 Context visualizer 5.6 8 Automatic context discovery 5.8

166

I. Thurlow et al.

(aka context tagging) can be carried out efficiently by users, and is therefore accepted readily, e.g. compared with recommended tagging. Adoption rate and frequency of using the AKWS functions. Monitoring of event counters gave the test administrators the opportunity to observe how users were using the AKWS. The events monitored were – – – – –

Recommended tagging requests Context association Context switching Workspace search Acceptance and denial of Context detection and discovery

Over the usage period we have observed which functions are accepted by users (Fig. 8.10). Context association and context switching events increase progressively while recommended tagging request events, search events and context discovery events are accepted much more slowly.

8.6.1.4

Discussion of AKWS Field Tests

In summary, the AKWS corresponds to user requirements and can be used to perform the intended tasks of users. Some functions, especially context services, were immediately accepted by users. Users noted the slow response of the application, a technical implementation issue. It seems that the users did not recognize immediately the benefit which tagging in general and especially recommended tagging generate. Before the test

Fig. 8.10 Cumulated frequency of events over time. Context switching and context association event counts increase throughout the test period. TGRQ, tag recommendation request counter; CXAS, context association counter; SEAR, search counter (this is the workspace search web service invocation counter); CXSW, context switch counter (this is the explicit context switch counter); CDYN, denied context discovery counter

8 Increasing Productivity in the Customer-Facing Environment

167

users did not carry out tagging activities frequently. A solution for this problem must be found on the organizational and management level, where incentives for tagging and knowledge sharing must be provided. On the other hand, context tagging (context association), which is a pre-requisite for context switching, is accepted and used with an increasing frequency by users.

8.6.1.5

User Effort Versus User Benefits for AKWS Functions

Using the AKWS creates benefits for users, but also adds to the cost for users in terms of time, cognitive complexity and workload, and learning cost. The results of the lab tests carried out with the AKWS allow us to estimate the specific user costs for using the functionality of the AKWS. Both the execution times under idealized conditions, and the analytic results of the user procedures show that the user cost are substantial, and that the user procedures create additional workload for the users. Using the AKWS functions requires user procedures of different complexity. In the case of “suggested context switch” the user just chooses between two responses, “passive ignore” or “accept”, while “context discovery” must be answered by a procedure comprising several actions. It is more likely that users will accept to carry out tasks which have low cost in terms of time and cognitive workload. Higher cost must be justified by greater benefits. This relationship varies for different parts of the functionality of the AKWS. We list the functions adding to user cost next to the user benefits in Table 8.3. The benefit is convenience and improved personal productivity (such as in the case of context switching), or information quality (such as in the case of search). Table 8.3 Costs and benefits of using AKWS functionality AKWS functions adding to user cost User cost Context association Low (with “manual” tagging) + create context Suggested context switch Low + accept or passive ignore Tag document by type-to-tag High Tag by recommendation High + select tag Context discovery High + accept context + name context + associate documents + set permission rights Search + memorize metadata + select by visual search in tag cloud

Benefits for users (personal productivity) Ability to work in context: context switching, filtering, and visualization As above Search (with added cost) As above Ability to work in context: context switching, filtering, and visualization

168

I. Thurlow et al.

The results suggest that users accept context related functionality immediately due to low user cost, and immediate benefit in terms of personal productivity (context switching and context search). Some of the benefit created by tagging (enabling efficient search) is also obtained from context tagging, which reduces the incentives for users to use document tagging functions.

8.6.2

Field Test of the Bid Unit Wiki/SMW

The Bid Unit Wiki (BUW) was introduced to the Bid Unit Team (5 core users and a community of 150 technical specialists) with a focus on the following three aspects of the functionality: • The use of the SMW to store and retrieve information about the customer proposals. How effective are the semantic features in assisting with searching and browsing the SMW? • The use of the SMW generally as a collaborative tool. How effective is the BUW in encouraging collaboration between the bid unit team and the technical specialists. • The use of the RSS feeds to pose questions to the technical specialists. The initial uptake and usage of the functionality was observed, and questionnaires and interviews were used to collect responses from users. The uptake of the Bid Unit Wiki progressed steadily after introduction. The first question to the community of technical specialists was posed immediately after the release and was answered within 3 days. Users initially explored the Bid Unit Wiki to test how it corresponds to their requirements, and then proceeded to use it as part of their working environment. The responses of users give a differentiated view of the acceptance and benefit perceived by the users. The team recognizes the value of the BUW primarily in the function to install a fast means of communication between the bid unit team and the large community of technical experts. The corresponding functionality is rated as valuable and beneficial for personal productivity. Spontaneous statements made by the users highlight the added value of the Bid Unit Wiki in comparison with the existing enterprise tools. The most attractive features were judged by users of the Bid Unit Wiki: • “. . . utilising expertise from the wider BT community in assisting us with responses . . . saving us time in searching which can be very time consuming.” • “. . . to get responses to awkward questions promotes greater team working” • “Asking bespoke questions.” • “. . . ability to locate previous information” • “Speed and ease of use to locate information and gather new information.” • “. . . gives quick and easy access to a wide range of specialists and knowledge that we would otherwise have to mail/phone people individually.” • “Reaching out to specialist not directly involved in bids.” • “. . . enabling us to obtain responses from the wider BT community, which is better for us and our customers of course.”

8 Increasing Productivity in the Customer-Facing Environment

169

Based on the very positive reception by users, the decision was made to install the BUW as a tool for collaboration at short notice. The full power of the BUW for knowledge exchange in a large community of technical experts unfolds itself when the community as whole adopts the BUW as a tool for sustained use, which in the short time available was only just starting.

8.7

Conclusions

In our case study we set out to evaluate, both at the user and the organisational level, a number of the technologies developed in the ACTIVE project. Our choice of technologies was determined in part by the requirements of our users, but also by the limitations of time, especially the limited ability of our professional users to divert part of their time during their regular work to the adoption of new technology. We would have liked, for example, to have been able to evaluate the process tools described in Chap. 6. We consider two of the project’s scientific hypotheses to be confirmed. It was clear that the use of applications incorporating lightweight ontologies, as implemented in the SMW and tagging, as implemented in the AKWS, can make a material difference to productivity in our two environments. Moreover, contextbased information delivery, supported by our machine learning algorithms, provides functionality which is valuable in managing information overload and can reduce the disruptive effects of switching task focus. The results of the detailed study of the user responses to the use of the AKWS and the SMW in their daily work have shown that the context services are accepted by users readily as a means to improve personal productivity. The use of AKWS varies strongly with individual user habits. For example, users who have not been tagging a lot before they used AKWS are likely to limit themselves to context accepting, and might adopt tagging with recommended tags in the course of intensified usage of AKWS. A subject of further research, and an important question to answer for future application, will be the cost/benefit ratio for users. It is clear that in order to enable context detection or facetted search the user has to provide valid and reliable input to the system beforehand. This has shown to involve user cost which may be weighted disproportionally high because it demands additional work from the user in a work situation where he or she is under high pressure imposed by other tasks. The user monitor in combination with online questionnaires has been an effective and reliable instrument to collect empirical data in a distributed work environment. Acknowledgement ACTIVE project partner ComTrade implemented the user monitor described in Sect. 8.6.1. The research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement IST-2007-215040.

170

I. Thurlow et al.

References Card S, Moran T, Newell A (1983) The psychology of human–computer interaction. Lawrence Erlbaum Associates, Hillsdale, NJ Hiemstra D (2009) Information retrieval models. In: G€ oker A, Davies J (eds) Information retrieval: searching in the 21st century. Wiley, Chichester, UK Kirakowski J (1996) The software usability measurement inventory: background and usage. In: Jordan PW et al (eds) Usability evaluation in industry. Taylor & Francis, Brighton, pp 169–177 Kirakowski J (1998) SUMI User handbook. Human Factors Research Group, University College Cork, Ireland Simperl E, Thurlow I, Warren P, Dengler F, Davies J, Grobelnik M, Mladenic D, Gomez-Perez J, Ruiz C (2010) Overcoming information overload in the enterprise: the active approach. IEEE Internet Comput 14(6):39–46

9

Machine Learning and Lightweight Semantics to Improve Enterprise Search and Knowledge Management Rayid Ghani, Divna Djordjevic, and Chad Cumby

9.1

Introduction

Enterprise search and knowledge management tools are amongst the most commonly used tools within enterprises today. This is mostly due to the fact that most organisations today have enormous quantities of information in their enterprises data warehouse and enterprise document repositories have been getting larger. The challenge facing knowledge workers in these companies is how to harness these enterprise-wide resources and how to use them when and where they are needed most. The majority of the tools deployed in enterprises for search and knowledge management are fairly generic and provide the same content to every knowledge worker regardless of their context and task. A typical enterprise search tool today doesn’t look much different than a typical web search engine, even though the goals and functions of the users of these two types of systems and the content they are operating on are vastly different. There has been a lot of research focused on web search in the past decade (Wang and Zhai 2007; Jansen and Spink 2006; Joachims et al. 2007) while enterprise search hasn’t received much attention from the research community (Mukherjee and Mao 2004). The motivation for the work described in this chapter came from several discussions and interviews we conducted in Accenture to understand the needs of enterprise knowledge workers. There were four key areas we identified that could be improved: • • • •

Context and task-sensitive access to information Access to fine-grained reusable modular chunks of information Intelligent workflow/process support Document analysis and checking support for collaborative document development

R. Ghani • D. Djordjevic • C. Cumby (*) Accenture Technology Labs, Rue des Cretes, Sophia Antipolis, France e-mail: [email protected]; [email protected]; [email protected] P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5_9, # Springer-Verlag Berlin Heidelberg 2011

171

172

R. Ghani et al.

We describe these areas in more detail later while the rest of the chapter describes our approaches to solve these challenges in the context of two critical enterprise knowledge management tasks: enterprise search and collaborative document development. We describe our work on augmenting an enterprise search tool with context mining, process mining, and visualization technologies that use a combination of bag of words and lightweight semantic representations, making users more productive and efficient. We also describe two support tools that were developed to help improve the quality of documents as well as improve the efficiency of the collaborative document development process. All three of these were tested extensively at Accenture with enterprise users. As a result of those tests and user feedback, the enterprise search engine (SABLE) as well as the document development toolkit were deployed and made available to over 150,000 Accenture employees. We present evaluation results using usage logs as well as questionnaires that show that these prototypes are effective at making consultants at Accenture more efficient as well as helping them find better information while at the same time being easier to use than existing enterprise tools for these tasks.

9.2

Improving Enterprise Search with Machine Learning and Lightweight Semantics

As mentioned earlier, even though enterprise search tools get used by a large number of users for a broad set of tasks, the majority of these tools are still fairly generic and provide the same content and results to every knowledge worker regardless of their context and task. We identified a need for providing contextsensitive and process-aware access to information that is automatically tailored to the particular needs of the task each user is engaged in. Current enterprise search tools also typically return a list of documents where each document can be hundreds of pages long. This is common among enterprise document repositories where Microsoft Word or PowerPoint files can have hundreds of pages or slides making it difficult for users to find the relevant content within them. Often, enterprise users are trying to find a specific object that they can reuse for their current need. This is common when users are looking for certain types of document sections or PowerPoint slides that can be quickly customized and re-used. Based on our discussions with users, an important need that recurred was the need to retrieve reusable “chunks” of content from enterprise search engines, instead of large monolithic documents. These “chunks” include objects such as sections of documents or graphics (such as an architecture diagram) that can be reused in future documents. In order to tackle these shortcomings of existing enterprise search tools, we developed SABLE, a research prototype for enterprise search with the following capabilities (illustrated in Fig. 9.1):

9 Machine Learning and Lightweight Semantics to Improve Enterprise Search

173

Fig. 9.1 SABLE search engine

1. Document search: Allows users to search for documents 2. Expert search: Allows users to search for experts within the enterprise. More details about this are in Cumby et al. (2009) 3. Graphics search: Allows users to search for graphics of specific type 4. Fast previews: Fast, visual previews of documents allows users to quickly preview documents before downloading them 5. Personalized contexts: Allows personalized re-ranking of search results based on automatically inferred contexts (illustrated in Fig. 9.2) 6. Visual “soft” filters: Allows users re-rank documents based on visual soft filters (illustrated in Fig. 9.3) 7. Search collaboration: Allows users to collaborate with and contact other Accenture users who are looking for similar information This chapter will focus on capabilities 3, 5, 6, and 7.

9.2.1

Graphics Search

Corporate digital libraries consist of business documents comprising not only of text data but also of graphics that get reused by knowledge workers working on new documents. These graphics include process flow diagrams, organizational charts, architecture diagrams, logos, and graphs which are embedded in documents but not

174

R. Ghani et al.

Fig. 9.2 Based on the search behavior of similar users, SABLE automatically comes up with personalized clusters for every user. Clicking on a cluster or moving the “Red Ball” to a cluster (or in between clusters) re-ranks search results biasing them more towards the clusters near the red ball

Fig. 9.3 “List-based” search filters only allow users to select a single value. SABLE contains Visual Filters to let users select multiple filter values by placing the red ball in between several values

9 Machine Learning and Lightweight Semantics to Improve Enterprise Search

175

individually available for users to search for and retrieve. Even if a user knows that he’s looking for a specific type of graphic, say an architecture diagram for the Microsoft Enterprise search solution, they first have to search for documents, manually browse hundreds of pages of content and then hope to find the relevant architecture diagram. Getting access to specific, reusable, pieces of graphics was a key requirement that came out of our discussions with users of enterprise search systems at numerous large companies. We developed a machine learning approach for graphics classification that automatically extracts graphics from corporate documents and classifies them into enterprise graphics taxonomy and enables graphics search functionality to augment traditional enterprise search. We augmented our classification algorithms with active learning (Settles 2009) to make the system adaptive. As a result, we developed (1) a method to automate the creation (extraction and consolidation) of reusable graphics from legacy MS Office documents, (2) analysis of feature extraction techniques that combine text, OCR, visual features and structural features and experimental evaluation of the contributions of these different feature sets for graphics classification, and (3) empirical evaluation of existing classification approaches and different sample selection strategies for active learning for graphics classification. More details of the algorithms and experimental results concerning the graphics classification are described in Djordjevic and Ghani (2010). We apply this graphics classification capability to the corporate repository at Accenture resulting in the extraction and classification of over one million graphics. These graphics are then indexed by a search engine and integrated into SABLE where a user can type in a text query and select a graphic type (org chart, process flow, architecture diagram, etc.) and retrieve relevant graphics. We developed this graphics search engine by indexing the graphics using the text that appears near (or within the image), and the categories that were assigned to it by our graphics classification system. We use different term weighting techniques such as weighing the titles of slides containing graphics more than the body of the slide. The text from the shape objects is incorporated in the indexing and in case the slide has no text, the rest of the document (global information) is used for capturing textual similarity. The classification scores are further used to re-rank the retrieved list of results.

9.2.2

Personalized Contexts

Typical enterprise search systems today return the same search results regardless of the user, context, or task. We developed the notion of personalized contexts that integrate context mining and process mining to deliver personalized results that are relevant to the user and his current context and task. The personalized contexts feature was enabled by the following technologies: 1. Context Modeling 2. Context Mining

176

3. 4. 5. 6.

R. Ghani et al.

Process Mining Context Detection Context Visualization and Switching Resource Re-Ranking The rest of this subsection describes these components in further detail.

9.2.2.1

Context Modeling

For context modeling, we represent an event as User U accessing a resource (typically a document) R at time T. U is represented as a set of lightweight semantic features of users at Accenture such as level, office location, and a set of skills. We experimented with two kinds of representations for R: a model using lightweight semantics in the form of metadata that KM curators had tagged documents with (document type, relevant product offering, relevant industry, etc.) and a bag of words representation. The experiments conducted to test the effectiveness of context mining showed that the lightweight semantics representation performs as well (and sometimes better) as the bag of words representation while being more efficient in terms of storage and processing time. Our deployed implementation therefore uses the lightweight semantic representation for R. The data used for context modeling and mining consists of three kinds of information: 1. Usage logs: Large database of search and access logs with timestamps from our corporate enterprise search engine spanning 147,000 users, 134,000 documents and 7.2 million actions over 2 years 2. Document data: Information about the document repository including lightweight semantics (in the form of metadata about the content, filled in when the content was uploaded based on a predefined company-wide taxonomy) 3. People data: Structured database of skills information with organizational information (company groups, office location, and career level) for each employee and a list of self-selected skills, along with proficiency rating and the number of years of experience etc. This database contains the above-mentioned details for over 170,000 employees

9.2.2.2

Context Mining

After we represent an event E as for each user U accessing resource R at time T, we then perform context mining using hierarchical clustering algorithms (Manning et al. 2008) on all events present in our data set. The details of some of the context mining algorithms are provided in Chap. 7. As a result of context mining, we obtain a list of approximately 1,000 generic contexts for the entire enterprise. These contexts are internally stored as a set of two similarity matrices – one that contains a membership score for each < person, context > pair and the other

9 Machine Learning and Lightweight Semantics to Improve Enterprise Search

177

contains a membership score for each < document, context > pair. These matrices are indexed and stored in memory to speed up contextual information delivery. The context mining component runs periodically and updates the list of generic contexts across all users and resources.

9.2.2.3

Process Mining

The process mining component also runs periodically to update the list of informal sequences of actions across all users and resources. We use the same data as in context mining. The Process Mining component is based on data mining techniques to obtain a probabilistic process model. The component constructs probabilistic temporal models that detect patterns of sequential user actions. For action modeling, a multi-relational clustering approach is used, where events are logs of users accessing documents described with a lightweight taxonomy and unstructured text. The Process Mining component uses Markov Models for discovering frequent sequences of actions. The processes are internally stored as probabilistic sequences of meta-data fields. For example: itemtype ¼ proposal material -> document_type ¼ powerpoint is a sequence that might be discovered as a result of PowerPoint documents being accessed frequently after documents tagged as proposal material. The goal is to integrate this functionality into SABLE to help infer resources that will be accessed next and make the search process faster.

9.2.2.4

Context Detection

When a user logs on to the SABLE system and does a search query, we use the person-to-context similarity of the logged-in user and the document-to-context similarity of the top 100 documents returned by the user’s search query to generate a ranked list of global contexts that are most applicable for the current user and his current needs. We then take the top n contexts as relevant contexts where n is currently set to 8 for SABLE.

9.2.2.5

Context Visualization/Switching

The context visualization component is given a ranked list of contexts that have been identified as most relevant to the user and his current information need. These contexts are displayed in a 2D representation, allowing the user to manually select nearby contexts and get new search results. They are automatically labeled with the top scoring metadata values of the context centroid. The user has the ability to look at the top contexts and move the focus to signal his current context. If the focus is in-between several contexts, the documents retrieved are re-ranked based on a weighted sum of the nearby contexts (as shown in Fig. 9.2).

178

R. Ghani et al.

Overall, this component displays the contexts that are inferred to be closest to the user’s current context and allows the user to manually select nearby contexts which results in the re-ranking of search results.

9.2.2.6

Resource Reranking

When a user uses the context visualization/switching component, the search results get reranked using the context and process inferred by the respective components. For each context, the context mining component has a document-context membership score. Based on the previous k documents viewed, the process mining component also returns a probability distribution over the metadata values for the next most likely document of interest. We combine both of these components and compute a ranked list of documents relevant to the current context (for the current user) as a function of previous documents viewed. This re-ranked list is then shown in SABLE.

9.2.3

Visual “Soft” Filters

The context visualization component is extended to display multiple search filters in a 2D representation labeled with the most frequent metadata values and allows the user to manually select co-occurring meta-data values and filter search results.

9.2.4

Search Collaboration

LiveNetLife provides semantically enabled social browsing. We use LiveNetLife to create awareness among knowledge workers who are working in similar contexts or on similar tasks and using context information from the context identification component.

9.3

Improving Collaborative Document Development with Machine Learning and Lightweight Semantics

The ability to collaboratively create documents is a common activity for most product and service organizations. Most large organizations have a distributed team of experts working together to create documents for a variety of purposes. These documents can be project proposals written in response to Request for Proposals (RFPs), training materials, marketing and sales materials or product

9 Machine Learning and Lightweight Semantics to Improve Enterprise Search

179

manuals. Typically, the development of these kinds of documents requires the use of a combination of collaborative formal and informal processes. Depending on the requirements of each document type, skilled teams must be identified and assembled by the project manager tasked with developing the final document. Where expertise cannot be identified in time, materials are simply drawn from the central document repository and adapted as necessary. We describe two support tools developed to help improve the quality of collaborative documents as well as improve the efficiency of the document development process. The first prototype, Document Development Toolkit, is designed to help knowledge workers find relevant information (and expertise) for the task at hand. The second prototype, Document Development Workspace, is designed to help large project teams work collaboratively, supporting the development of documents.

9.3.1

Document Development Toolkit

We developed the Document development toolkit as add-ins to commonly used document creation tools, specifically Microsoft Word and PowerPoint. The main motivation for this decision was to support the users in the context of the document they’re developing and to embed the support tools in the document creation process as opposed to in a separate application that the users would have to use. The document development toolkit consists of the following features: 1. Search and visual previews from within Word and PowerPoint (Document, Graphics, and Expert Search) 2. Search for experts, communicate with them using MS Office Communicator and adding them to the project team 3. Auto-Suggestion of search terms: Based on the local position of the mouse cursor in the Word/PowerPoint document a set of keywords is extracted from the current working position and search-terms are auto-suggested 4. Search refining based on personalized clusters: Same backend functionality as the context mining and detection in SABLE except the front-end shows the current context and most similar contexts in a simple word cloud. We had to modify the front end of context visualization and switching into something more compact due to screen space limitations in MS Office add-ins 5. Personalized clusters (based on the same context mining described earlier) 6. Interactive document Scrubbing/Redaction functionality to remove client confidential information before the document can be shared 7. Team building, section assignment, and document development workspace creation The Document Development Toolkit was designed to help knowledge workers find the right information (and expertise) for the task at hand. The toolkit is implemented as an add-in for MS Office applications (MS Word and PowerPoint specifically) and is illustrated in Figs. 9.4–9.6.

180

R. Ghani et al.

Fig. 9.4 MS Word and MS PowerPoint with document search (top) and context visualisation in a word cloud with eight closest neighboring contexts displayed (bottom)

Fig. 9.5 Document development toolkit tabs. From left to right: document search, expert search, graphics search

The Interactive Redaction Tool shown in Fig. 9.7 addresses the problem of sharing documents with client sensitive information and encouraging knowledge workers to contribute content to the enterprise repository at a much larger scale. An algorithm for document redaction described in Cumby and Ghani (2011) enables document anonymization in a bottom-up fashion. The approach attempts

9 Machine Learning and Lightweight Semantics to Improve Enterprise Search

181

Fig. 9.6 Word cloud based on context detection implemented in the document development toolkit

Fig. 9.7 Screenshot of the interactive redaction component integrated into the document development toolkit. The user analyzed a document about Ford and several sensitive terms have been highlighted for inspection

to optimally perturb a document to maximize the classification error for the sensitive client identity within the set of potential clients for a document (the confusion set) which is known in advance. When a document is loaded, the addin builds a word frequency vector of the existing text and returns the most likely

182

R. Ghani et al.

client classification based on a Naive Bayes model, along with the words suggested to redact in order for the document to resemble membership to other client classes. The user can adjust a slider to change the highlighted list of terms to redact. It also includes simple named-entity and template-based recognizers for social security numbers and other personal identifiers which are often necessary to remove when scrubbing a document for submission.

9.3.2

Collaborative Document Development Workspace

The Collaborative Document Development Workspace is designed to help large project teams work collaboratively during the rapid development of documents. It is built on the Semantic Media Wiki (SMW) and allows each team member to continuously contribute their expertise to the document development process. The prototype automatically analyses a document to identify a possible response document outline and automatically populates it with relevant content retrieved from the enterprise-wide knowledge base. Using the SMW collaborative environment, the project manager can quickly organize tasks and meetings with the appropriate experts, and keep track of deadlines. We have developed the following capabilities in the Document Development Workspace: • Dynamically import data that is relevant to the current document (information about people, credentials, products, similar documents) in to the new workspace • Allow task allocation, tracking, and management for the project team • Enable a project manager to set-up a process or import a process that team members need to follow using a visual process editor • Enable connection between the knowledge stored in the workspace and the tools consultants use to develop the document (typically MS Word and PowerPoint) allowing them to easily access the knowledge and facts stored in the workspace • Automatic configuration of a new project development workspace, templates for adding project specific information from enterprise data sources • Customized for document development with templates and forms enabling functions such as adding project workspace, adding sections, adding and organizing meetings, adding and organizing tasks, calendar and timeline view, task list, etc. • Dynamic data population from live enterprise sources. These data and properties are queried via an inline query language provided by SMW and the results rendered into the different visualizations (e.g. searching for team members with certain skill proficiency for including them in the team) • Import capabilities from SMW to MS Word for facts, sections, offerings, etc. through Office Smart Tag Wiki extension • A visual process visualization and editing tool for the SMW allowing project managers to represent and visualize formal processes their team members should follow

9 Machine Learning and Lightweight Semantics to Improve Enterprise Search

9.4

183

Evaluation

We conducted a series of experiments and user tests for the prototypes described in this chapter. In this section, we focus on describing the results of our evaluation of the enterprise search tool SABLE. The final release version was deployed in Accenture and made available to all of the enterprise users. We had over 2,000 users in the first 6 weeks of this release. The results we describe below come from (1) analyzing usage logs of the SABLE application, (2) a survey that was answered by 104 users, and (3) a task-based validation session where a group of 20 consultants were asked to perform a series of tasks and respond to questions about SABLE.

9.4.1

Web-Based SABLE Survey

As the first step of the validation activity we conducted a web-based survey that was taken by 104 users. A summary of the results is given below and shown in Fig. 9.8. See Sect. 9.4.2 for an explanation of the questions: • 89% of respondents agree that they would like to use SABLE frequently and 82% agree that it is easy to use • Compared to standard enterprise search tools, 86% find SABLE easier to use, 67% believe it gives better results and 71% believe it gives them relevant search results faster • Regarding the Graphic Search Feature, 84% of the users believe that they find the feature useful for finding relevant information, 80% believe it enables them to get relevant information faster and 76% agree it gives them better results

Fig. 9.8 SABLE survey taken by 104 users. See Sect. 9.4.2 for an explanation of the questions

184

R. Ghani et al.

• Regarding the personalized clusters, 62% of the users believe the feature is useful for finding relevant information 54% reported they believe the feature enables faster (more efficient) search and 55% believed that the feature give them better search results • Regarding the Visual Filters feature, 66% of the users believe the feature is useful for finding relevant information, 58% that it enables faster (more efficient) search and 57% say that it enables better search results • Regarding LiveNetLife as a Collaboration feature, 71% of the users believe it’s useful for connecting them with other users looking for similar information, while 55% agree that the feature might help to get relevant information through other users

9.4.2

Task-Based Validation for SABLE

In addition to the large-scale survey, we also conducted a more focused task-based test with 15 “power” users. Based on the requirements gathering process and interviews with potential users, we designed five information needs that typical consultants in Accenture would have. We asked 15 users to attempt to fulfill these information needs using SABLE. The survey conducted for each task asked the users about the utility of SABLE overall for this task, compared to the standard enterprise search tools. The tasks we asked the users to perform were: Task 1: Find an architecture diagram or solution overview for a content management system Task 2: Find a credential for Biometrics that shows innovative ideas Task 3: Find training material on the use of social media for internal employees Task 4: Find vendors or alliance partners that work on BI For each task, we asked the users to tell us if SABLE helps them find information faster (Speed) and if it helps them find better information (Quality). After finishing the tasks, we asked them 17 questions. The first two (Q1 and Q2) asked them if they would like to use the SABLE frequently and if they found it easy to use. The next three (Q3, 4, 5) asked them to compare SABLE to the standard enterprise search engine in Accenture in terms of ease of use, information quality, and speed of getting information. The next 12 questions focus on specific new features of SABLE (Graphics Search, Personalized Clusters, Search Collaboration, and Visual Filters) and asked users if they found the features useful for finding relevant information, if it gets them relevant information faster, and if it enables better search. Some results are listed here and shown in Fig. 9.9: Q4:100% of users agree that SABLE gives them better search results than the standard Accenture enterprise search engine Q5: 83% agree that it makes the search process faster and saves them valuable time

9 Machine Learning and Lightweight Semantics to Improve Enterprise Search Q17 Q16 Q15 Q14 Q13 Q12 Q11 Q10 Q9 Q8 Q7 Q6 Q5 Q4 Q3 Q2 Q1 Task 5 Quality Task 5 Speed Task 4 Quality Task 4 Speed Task 3 Quality Task 3 Speed Task 2 Quality Task 2 Speed Task 1 Quality Task 1 Speed

185

Strongly Disagree Disagree About the same Agree Strongly Agree

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

Fig. 9.9 Results of task-based evaluation of ACTIVated SABLE

Graphic search (Q6, Q7, Q8): 100% believe it enables them to get relevant information faster, 82% agree that it gives them relevant information faster, and 72% agree it gives them better search results Personalized clusters (Q9, Q10, Q11): 67% believe the feature is useful for finding relevant information, enables faster (more efficient) search, and enables better search results LiveNetLife as a tool for search collaboration (Q12, Q13, Q14): 67% believe it’s useful for finding relevant information Visual filters (Q15, Q16, Q17): 80% users believe the feature is useful for finding relevant information, 80% that it enables faster (more efficient) search

9.4.3

Usage Log Analysis for SABLE

We collected extensive usage data on SABLE. We describe our analysis of that usage data in this section. The data we report on was collected between January 11, 2011 (the full release date) and February 23, 2011. In that period, 2,064 unique users used SABLE. Some high level statistics are shown in Figs. 9.10–9.12. We use the usage logs to measure the impact of using context mining and detection to re-rank search results. We track each use of the “personalized context” feature and calculate the change in rank of every document that was viewed (clicked) by the user. For example, if a user moves the “red ball” to a different context and then views the document at rank 4 that was previously at rank 14 (with

186

R. Ghani et al.

Fig. 9.10 Visit distribution for users

Fig. 9.11 Query distribution for users

standard search), the change in rank is 10. We notice that about 66% of the document views did not result in a change in rank. Figure 9.13 shows the “Change in Rank” distribution for the non-zero values. The average change in rank (excluding those that did not result in any change) is 14.5 (out of 100 top results shown in the search) which shows that when results are re-ranked using context mining and detection, the documents viewed are ranked on average 14.5 places (14.5%) higher than they were in the initial search results. This clearly shows that the re-ranking approach improves search experience and results in giving users not only a faster way to get relevant results but also reduces the likelihood of missing relevant documents if they are lower down in the search results.

9 Machine Learning and Lightweight Semantics to Improve Enterprise Search

187

10000

Number of USers

1000

100

10

1 0

10

20

30

40

50

60

70

Average Number of Documents Previewed Fig. 9.12 Distribution of number of documents previewed per session

Fig. 9.13 Distribution of change in rank after using personalized context feature for the documents viewed by users. This only includes the distribution for cases where the change in rank was non-zero. About 66% of documents viewed did not have a change in rank

9.5

Summary

We have described several prototypes that were developed to tackle key challenges in enterprise search and knowledge management. These prototypes used a combination of machine learning and lightweight semantics to make generic knowledge management tools context and task sensitive in order to increase the productivity of

188

R. Ghani et al.

knowledge workers. We focused on two enterprise problems: (1) Enterprise search and (2) Collaborative Document Development. We describe an enterprise search tool employing context mining, process mining, and visualization technologies that use a combination of bag of words and lightweight semantic representations, making users more productive and efficient when performing enterprise search. We also describe two support tools to help improve the effectiveness and efficiency of knowledge workers collaboratively creating documents. All three of these were tested extensively at Accenture and two have been deployed and made available to over 150,000 Accenture employees. Our evaluation results show that these prototypes are effective at making consultants at Accenture more efficient as well as helping them find better information while being easier to use than existing knowledge management tools. Acknowledgements The research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement IST-2007215040.

References Cumby C, Ghani R (2011) A machine learning based system for semi-automatically redacting documents. Proceedings of the 23rd innovative applications of artificial intelligence conference, IAAI 2011, San Francisco, CA Cumby C, Probst K, Ghani R (2009) Retrieval and ranking of entities for enterprise knowledge management tasks. Semantic search workshop at WWW2009, Madrid, Spain Djordjevic D, Ghani R (2010) Graphics classification for enterprise knowledge management. ICDM workshops 2010, Sydney, Australia, pp 562–569 Jansen BJ, Spink A (2006) How are we searching the world wide web? A comparison of nine search engine transaction logs. Inf Process Manage, 42(1). Formal methods for information retrieval, Jan 2006, pp 248–263 Joachims T, Granka L, Pan B, Hembrooke H, Radlinski F, Gay G (2007) Evaluating the accuracy of implicit feedback from clicks and query reformulations in web search. ACM Trans Inf Syst 25(2), Article 7 (Apr 2007) Manning CD, Raghavan P, Sch€ utze H (2008) Introduction to information retrieval. Cambridge University Press Mukherjee R, Mao J (2004) Enterprise search: tough stuff. Queue2(2) (Apr 2004) Settles B (2009) Active learning literature survey. Computer sciences technical report 1648, University of Wisconsin-Madison Wang X, Zhai CX (2007) Learn from web search logs to organize search results. Proceedings of the 30th annual international ACM SIGIR conference on research and development in information retrieval, Amsterdam, Netherlands

10

Increasing Predictability and Sharing Tacit Knowledge in Electronic Design Vadim Ermolayev, Frank Dengler, Carolina Fortuna, Tadej Sˇtajner, Tom B€ osser, and Elke-Maria Melchior

10.1

Introduction

In knowledge-intensive sectors of industry knowledge workers (Drucker 1969) are central to an organisation’s success – yet the tools they must use often stand in the way of optimising their productivity. A remedy to the defects of current knowledge worker tools has recently become substantially in demand across industries. For example in the ACTIVE project, the three case studies in consulting, telecommunications and engineering design have been driven by this requirement. Knowledge workers acting alone but more importantly in teams that can be distributed geographically and organizationally are of a particular concern and focus in our research themes. One of the themes is the support for informal process knowledge acquisition, articulation and sharing. To this theme the notion of an informal (or knowledge) process is central. The definition by Warren et al. (2009) lays out the ground for the specific features: “Informal processes are carried out by knowledge workers with their skills, experience and knowledge, often to perform difficult tasks which require complex, informal decisions among multiple possible strategies to fulfil specific goals.

V. Ermolayev (*) Zaporozhye National University, 66 Zhukovskogo st., 69600 Zaporozhye, Ukraine e-mail: [email protected] F. Dengler Karlsruhe Institute of Technology, B. 11.40 KIT-Campus S€ ud, D-76128 Karlsruhe, Germany e-mail: [email protected] C. Fortuna • T. Sˇtajner Jozef Stefan Institute, Jamova 39, SI-1000 Ljubljana, Slovenia e-mail: [email protected]; [email protected] T. B€osser • E.-M. Melchior kea-pro, Tal, Spiringen CH-6464 Switzerland e-mail: [email protected]; [email protected] P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5_10, # Springer-Verlag Berlin Heidelberg 2011

189

190

V. Ermolayev et al.

In contrast to business processes which are formal, standardized, and repeatable, knowledge processes are often not even written down, let alone defined formally, vary from person to person to achieve the same objective, and are often not repeatable. Knowledge workers create informal processes on the fly in many situations of their daily work”. ACTIVE has adopted a service-oriented and component-based approach to its architecture. Services and components are defined at a number of levels (Warren et al. 2009). At the bottom level are infrastructure services. At the level above this, machine intelligence technology is used. For example the process mining service learns repeated sequences of action executions which constitute running processes and populates the knowledgebase with these. Finally at the top level are the applications. One of the case study applications is the management of design project (DP) knowledge in microelectronic and integrated circuit (MIC) engineering design. This case study is lead by Cadence Design Systems GmbH (www. cadence-europe.com), an engineering design services provider in this domain. It goes beyond the existing performance management solutions by providing the functionalities of the following two kinds: (1) at the back-end, the learning of design process execution knowledge from distributed datasets of acquired knowledge; and (2) at the front-end, design project knowledge articulation and sharing – by providing a lightweight collaboration platform. The remainder of the chapter is structured as follows. Section 10.2 surveys the related work in informal process representation, mining and extraction, articulation and sharing. It also outlines the unsolved problems that are further addressed in our work. Section 10.3 presents briefly the ACTIVE approach to informal process acquisition, articulation and sharing that helps the knowledge workers in engineering design navigate their projects. Section 10.4 elaborates on the architecture and implementation of our fully functional software prototype. Section 10.5 presents the plan for and the results of the validation of the implemented software in an industrial setting. Section 10.6 discusses the results and draws some conclusions.

10.2

Related Work

The research and development work presented in this chapter provided contributions in several interrelated aspects relevant to managing and productively using informal process knowledge. Our contributions implemented and integrated in the software prototype (Sect. 10.4) comprise: the representation of informal process knowledge in the form of ontologies; the methods for informal process mining and extraction from process logs; the methods for informal process knowledge articulation and sharing using a visualization and superimposition approach. This section analyses how our results are positioned relative to other work in these directions.

10

Increasing Predictability and Sharing Tacit Knowledge in Electronic Design

191

10.2.1 Process Knowledge Representation The mainstream in process modeling is represented by enterprise and business process representations – in the form of ontologies or languages. Among the ontologies the following results have to be mentioned: the Enterprise Ontology (Uschold et al. 1998), Toronto Virtual Enterprise Ontology (TOVE) (Gr€uninger et al. 2000), and more recently the theoretical work by Dietz (2006) and the reference ontology for business models developed in Interop, an EU Sixth Framework Programme (FP6) Network of Excellence (Andersson et al. 2006), see also www.interop-vlab.eu. The business process modeling community has developed a variety of languages with the major objective of representing business processes as the executable orchestrations of activities. The most prominent examples of such languages are: PSL (Bock and Gr€ uninger 2005), BPEL and more recently WS-BPEL (docs.oasis-open.org/wsbpel/2.0/OS/wsbpel-v2.0-OS.pdf), BPML and more recently BPDM (www.omg.org/spec/BPDM/1.0/). A more comprehensive approach to semantic business process modeling and management has been developed in the FP6 SUPER project (Hepp and Roman 2007). A major shortcoming of the listed results is that they are not supposed to provide a means to model informal processes as denoted in the definition by Warren et al. (2009). One of the relevant approaches to modelling and representing informal processes has been developed in the FP6 Nepomuk project (Grebner et al. 2006). A shortcoming of the process representation in Nepomuk ontologies is the limitation of the scope only to the tasks performed on the computer desktop. Our approach to informal process representation builds on the work in dynamic engineering design process modeling of the PSI and PRODUKTIV þ projects (Ermolayev et al. 2008). Our contribution in ACTIVE lies in the development of the lightweight knowledge process representation for engineering design that is essentially a micro-ontology providing a simplified yet sufficiently expressive view of a design process to be visualized for articulation and sharing. This microontology is aligned with the ACTIVE Knowledge Process Model (Tilly 2010) through the PSI Upper-Level Ontology where the latter is used as a semantic bridge (Ermolayev et al. 2008).

10.2.2 Informal Process Knowledge Mining and Extraction Process mining is a set of data mining techniques, focused on constructing process models out of a large number of events. The purpose of these techniques is to discover process, control, data, organizational and social structures from event logs. Practical usefulness of process mining in our setting is twofold. Firstly, it allows inferring a process model when such a model did not exist in an explicit form. Secondly, it allows devising alternative models to the primary one to enable comparison of different possible interpretations with regard to complexity and observe the

192

V. Ermolayev et al.

extent to which the primary model is being followed. Knowing the differences between the actual process model and the mined process model is crucial when optimizing the process. In the case of microelectronic design the most interesting part of the structure is the process itself. Although process mining in general also considers more organizational and social structures (van der Aalst and Song 2004), the design process for a particular design artifact is focused mainly around a single knowledge worker and his design decisions. The knowledge process which we are trying to uncover is a product of a designer’s experience and intuition and is rarely explicitly documented. This makes it valuable to ensure productivity and at the same time difficult to capture manually. There exist several different approaches to process mining each producing models of varying expressivity. The selection of an appropriate model is influenced by the properties of the event log and the expressivity requirement of the process model. However all process models are based on the notion of states – at any point in execution the process resides in some state. Multiple-actor models permit several simultaneous states although in the electronics design domain a single process instance is usually executed by a single designer. Another differentiating point between various classes of process models is the semantics of the transition between states which affects the expressivity of the model. In informal knowledge processes, the states are often not well-defined which requires solving this issue before tackling the process mining problem. One approach that we incorporated in knowledge process mining software from other application domains was to perform clustering on event logs and use the clusters as proxies for states (Sˇtajner et al. 2010) controlling the complexity of the process model via the desired number of clusters. In terms of transition modeling the most straightforward approaches consider the Markovian assumption: each transition to a new state is dependent only on the previous state. Usually the transition probabilities are statistical estimates of the conditional probability of one state directly following another (Hingston 2002). We have explored this approach in related knowledge worker scenarios and discovered that simple Markovian models work well for very fine-grained low-level events (Sˇtajner and Mladenic´ 2010). A side effect of using such models is that they tend to have many states and transitions which make them difficult to interpret. Because of this we often resort to de-noising the model by pruning the transitions which we consider to have little information. For this purpose Probabilistic Deterministic Finite Automata are often used, for which statistically well-founded techniques for determining significant transitions are available (Jacquemont et al. 2009). In environments where minute variations in activity order are not critical these can be further relaxed to the conditional probability of one state following another within a time window. Such a relaxation results in a slight decrease in expressiveness since a transition only means that a particular event has occurred within a given time window before some other event. However this payoff avoids too much sparsity especially when we are constrained by having many distinct activities in a relatively short event log.

10

Increasing Predictability and Sharing Tacit Knowledge in Electronic Design

193

When higher expressiveness in control structures is required we can consider using the family of process mining techniques based on Petri nets implemented in the ProM framework (van Dongen et al. 2005). This approach provides for modeling patterns beyond the Markovian assumption, allowing logical structures such as conjunctions, disjunctions, splits and joins. Although the compromise is that they do not operate probabilistically an important benefit of Petri net-based approaches is that the models can also be transformed into extended Event Process Chain (eEPC) diagrams which are more familiar to process analysts and more amenable to comparison with formal process models. All of the aforementioned models can be expressed with particular subsets of PSI ontology terms. In that sense the PSI Suite of Ontologies provides the common knowledge representation formalism for knowledge integration, fusion and visualization.

10.2.3 Informal Process Knowledge Articulation and Sharing The spiral of knowledge (Nonaka and Takeuchi 1995) introduces different knowledge conversions which is a fundamental part of sharing knowledge. People can share tacit knowledge with each other (socialization), but this is a rather limited form of sharing knowledge. Knowledge articulation within companies is the process of making tacit knowledge explicit (externalization). This explicit knowledge can be combined with other explicit knowledge (combination) and shared throughout an organization. Other employees extend and reframe their tacit knowledge with explicit knowledge by internalizing it (internalization). There are different ways to articulate and share informal process knowledge, but in all cases the informal process knowledge has to be made explicit. For instance process knowledge can be visualized manually or with tool support. In contrast to the visualization approach, the process knowledge can also be stored and shared within the system by using it directly for recommendations (Dorn et al. 2010).

10.2.4 Articulation and Sharing using Visualization Approach It is natural for a human to use visualized representations of artifacts in general and of processes in particular. Research in psychology, human memory models, image recognition and perception reveals that graphical representations are comprehended much easier and with lower effort than equivalent textual ones (Crapo et al. 2000). Therefore process visualization is one of the mature instruments to articulate processes thus enabling users to easily understand the logic of a process. Most process visualization techniques are included in process modeling activities, which can be centralized or decentralized. An abundance of modeling methods and tools like ARIS (Scheer and Jost 2002) and IDEF3 (Mayer et al. 1995)

194

V. Ermolayev et al.

have been developed to ease the standardization, storage, and sharing of process visualization. Unfortunately these tools are not sufficient for modeling collaborative, decentralized processes. Therefore other approaches like CPM (Ryu and Y€ucesan 2007) have been introduced. In the area of knowledge processes additional methods and tools like KMDL (Gronau et al. 2005), PROMOTE (Woitsch and Karagiannis 2005) and CommonKADS (Schreiber et al. 1999) have been developed extending the methods and tools mentioned above. In addition, semantic wikis combine the collaborative aspects of wikis (Leuf and Cunningham 2001) with Semantic Web technology to enable large-scale and interdepartmental collaboration on knowledge structures. Such features of semantic wikis have been extended to support process development (Dengler et al. 2009), enterprise modelling (Ghidini et al. 2009) and workflows (Dello et al. 2008). Our contribution in process visualization is the enhancement of the existing Semantic MediaWiki (SMW) process development approach (Dengler et al. 2009) to visualize and discuss informal processes. Our project navigation approach is based on offering a collaboration platform to knowledge workers that facilitates socializing, externalizing and internalizing design project knowledge using visualization. Visualizaton of project knowledge helps to combine and internalize explicit project knowledge in a way that suggests productive continuations of project execution.

10.3

The Approach to Project Knowledge Navigation

The goal of the presented case study is providing a software tool for design project managers in MIC that will articulate and facilitate sharing knowledge about good development practices in this domain. An objective of a project manager as a knowledge worker is finding a reasonable balance between the available and the achievable in order to meet the requirements of a customer and accomplish development in his project with the highest possible productivity. The complexity of this task in modern design environments is beyond the analytical capabilities of even an experienced individual. A manager has to find an optimum in a solution space that has many facets: product structure comprising possibilities for block reuse; the compositions of the development team involving required roles and capabilities of the available individuals; the choices of the tools for performing design and corresponding design methodologies; the resources available for the project; project constraints and business policies, etc. One more complication may appear in the course of the execution of the project – the circumstances may change because of external events. Hence a previously good plan may turn out to be not acceptable for the follow-up. Re-planning may therefore be required at any moment. Project managers use their working experience and intuition for taking planning decisions under these complex conditions. In fact they rely on following good practices and using the suggested development methodologies that they used in

10

Increasing Predictability and Sharing Tacit Knowledge in Electronic Design

195

the past and which constitute their tacit working knowledge of project management. Our working hypothesis in this research was that offering a software tool for: • Eliciting good development practices as stable working patterns from the design project logs • Visualizing those practices of past projects, the plan and the state of the execution of a current project • Facilitating moderated discussions among the members of the development team on different aspects of a project will decrease the complexity of making decisions for a project manager and increase the robustness of his knowledge work. Such a tool would essentially make the tacit knowledge of project managers within a company explicit – i.e. articulate and facilitate sharing good project management and engineering design practices. For checking this hypothesis the software tool prototype of a Design Project Visualizer has been developed in the case study. The tool implements a project navigation metaphor – helping a knowledge worker find a productive execution path through the state space of an engineering design project. It is known for informal processes in general and the processes of engineering design in particular that the paths to a desired outcome cannot be specified in advance – before the process starts. Instead, a knowledge worker has to make his decision about a follow-up action by choosing among the possible continuation alternatives in an arbitrary process state – very similarly to the decisions made by a driver on the road. Drivers use navigation systems that suggest the ways to go for bypassing traffic jams, choosing a faster or a cheaper way. A similar approach is employed in our work for helping a project manager to make decisions about the continuations of his design project. The Design Project Visualizer, like a car navigation system, provides the visualized views of the basic “terrain” map. These views are product structures, methodology flows that are either generic or bound to a particular product structure, Work Breakdown Structures (WBS). These representations are essentially provided by a project manager in a top-down fashion when he plans and kicks-off the project. The Design Project Visualizer also assists in finding out where the project is on the “terrain” at a specific point in time. The knowledge about the execution of the project is mined from the available project log datasets, transformed to the terms of the used ontology, stored to the knowledgebase, and superimposed onto the project execution plans. Unlike a car navigation system the Design Project Visualizer is a tool for team work. It provides the infrastructure and the functionality for moderated discussions attached to a visualized representation of any kind of a project constituent. By that it facilitates making more informed decisions that are also more transparent to the team members and are elaborated and approved with their active participation. For constructing the necessary building blocks of the project maps and execution tracks we first looked at the tasks of the project managers in their everyday work

196

V. Ermolayev et al.

Develop Product Structure

Track DP Execution

Compose Development Team

Select Methodology

Generate WBS

Typical Tasks Cadence Front-end

Cadence Back-end

Cadence Project Management Tools (CFI Framework, ProjectNavigator)

DP Monitor and Data Collector

Design Process Design Environment

ACTIVE Front-end

MO MO

MO

Project Map

WBS

static top-down knowledge

Temporal Probabilistic Process Model

Legend:

DP Visualizer Collaborative Platform (SMW)

AKWS Server Process Mining and Extraction Component DP Execution Logs

Design Projects …

– ACTIVE component;

– ACTIVated component;

– back-end component;

– front-end component

Cadence Knowledgebase

Project Execution Trace

PSI

DP representation instances (top-down and bottom-up)

DP Execution Instances

SMW Connector dynamic bottom-up knowledge

ACTIVE Back-end

DP Monitor and Data Collector

Design Process Design Environment – Cadence component

Fig. 10.1 The configuration of ACTIVE and Cadence technology components for design project knowledge acquisition, articulation and sharing

and extracted the typical tasks of the project planning and execution management that may be effectively facilitated. Those typical user tasks (Fig. 10.1) are • • • •

Analyze the requirements and develop the structure of the product Choose development methodology and compose the team Develop the work breakdown structure Monitor the execution of the project

After extracting the typical tasks we decided about the requirements for the functionality of the software tool. The requirements were elaborated by looking at the working practices of a project manager in MIC design and extracting the use case scenarios.

10.4

Prototype Architecture and Implementation

The architecture of the fully functional prototype of the ACTIVE Design Project Visualizer is pictured in Fig. 10.1. It comprises both the back-end and the front-end components and involves several ACTIVE technologies. Design process knowledge acquisition is done mainly at the back-end while the functions of knowledge articulation and sharing are offered by the front-end. As shown in Fig. 10.1, the prototype helps users to perform their typical tasks of design project management. Therefore it could be classified as a project management tool. The tool monitors the environments of the managed engineering design project, that are design systems,

10

Increasing Predictability and Sharing Tacit Knowledge in Electronic Design

197

and allows for run-time extraction of the process-related knowledge in a bottom-up fashion. The normative, methodological and static parts of project knowledge are provided via the external tools in a top-down manner. The external tools are the ProjectNavigator and the Cadence Flow Infrastructure (CFI) Framework – c.f. Fig. 10.1. Hence, the prototype exploits the superimposition of the top-down and bottom-up project knowledge for making its articulation and sharing more efficient and effective. Acquisition is done by incremental collection of the new knowledge about the executions of design processes through monitoring design processes in their environments and mining the dataset containing design process execution logs – using the ACTIVE Process Mining component based on the probabilistic temporal process model (TNT) (Grobelnik et al. 2009). The approach to process mining is based on the generation of the Hidden Markov Models (Rabiner 1990). As outlined in Fig. 10.1 the ACTIVated Design System Framework tools monitor the design environments and the design processes and collect the data about the low level events in the respective datasets. The datasets are further fed to the Process Mining Service of the ACTIVE Knowledge WorkSpace (AKWS) Server that produces the instances of the segments of the executed design processes in terms of the PSI Suite of Ontologies. These instances are further stored in the Cadence Knowledgebase. Articulation and sharing are done by visualizing different facets of DP knowledge in the collaborative front-end using the SMW (Kr€otzsch et al. 2007) as a platform – the ACTIVE DP Visualizer. Visualization functionality is structured around the typical tasks that DP managers perform in their everyday business (upper part of Fig. 10.1). The kinds of visualization pages are those for: product structures; generic methodologies; product-bound methodologies1; tools; and actor roles. These primary functionalities are supported by decision making instruments for conducting moderated discussions – the discussion component as an extension of SMW and LiveNetLife (www.livenetlife.com), an application for contextualized interactive real-time communication between the users of a web site.

10.4.1 Knowledge Representation A challenge in the development of knowledge representation for the case study and the software prototype of the Design Project Navigator was finding a proper balance between:

1

A product bound methodology is a superimposition of the segments of the generic methodologies appropriate for the particular types of functional blocks in the structure of the product to be designed.

198

V. Ermolayev et al.

• The background result, the PSI Suite of Ontologies for MIC Engineering Design domain used at Cadence, and the model of a knowledge process (KPM) developed in ACTIVE (Tilly 2010) • The expressive power of the knowledge representation of the Cadence knowledge base (PSI Ontologies) and the lightweight character of the enterprise knowledge structures developed in ACTIVE caused by the lightweight character of the SMW used for the prototype development The first aspect was essentially a harmonization problem. For harmonizing the KPM with the PSI Suite of Ontologies the PSI Upper Level ontology (PSI-ULO) has been used as a semantic bridge (Ermolayev et al. 2010b). Please refer to isrg.kit. znu.edu.ua/ontodocwiki/ for the online documentation of this suite of ontologies. The harmonization process was bidirectional. On one hand the Suite of PSI Ontologies has been refined by cleaning the representations of process patterns and processes. This work led to fixing the v.2.3 release of the PSI Suite. On the other hand the KPM has been revised by aligning it to the PSI-ULO. This work led to the final release of the KPM (Tilly 2010). The second problem was the selection of the minimal required part of the PSI Core Ontologies v.2.3 as the lightweight background knowledge representation for the Design Project Visualizer. For that the requirements based on the analysis of the typical user tasks and use cases have been applied and resulted in the development of the micro ontology for the case study.

10.4.2 The Back-End: Process Mining and Extraction The actual implemented workflow is as follows: first, the designer’s workstation is instrumented with logging tools that capture his activities, their outcome and measure the time that was required to complete those activities. Once the data is exported the process mining software loads the sequence logs and constructs a process model based on probabilistic deterministic finite automata. The fitness for inclusion of a transition between two generic tasks in the process is evaluated using the following procedure: given an error rate and sample size, we use a statistical sequence mining technique to determine constraints for inclusion of individual transitions in the process model as presented in Jacquemont et al. (2009). We apply a criterion called proportion constraint. Given a desired risk factor and an actual process execution log, we can compute the empirical probability of every possible transition from one state to another. This can then be used as a basis for determining whether every transition in the process is statistically significant given the observed grounding in the process execution log. A benefit of using a statistical approach is that the only parameter that the process analyst needs to specify is the risk factor which corresponds to the expected false positive rate. This parameter is easier to understand and specify than some arbitrary probability threshold. We have found that pruning the model following this approach does

10

Increasing Predictability and Sharing Tacit Knowledge in Electronic Design

199

not affect the predictive power too adversely, while significantly reduces complexity. Following that, the software outputs the two sets of results: • The process pattern model expressing process state transition patterns as Generic Tasks and Generic Activities – action patterns. The model also specifies statistical dependencies between individual action patterns as possible output and input configurations. • The actual design process instances in terms of Tasks, States and Activities to which concrete Actor and Design Artifact representation instances are related. An instance of the whole design process is considered a top-level Task managed by the Actor. The top-level Task comprises the lower-level Tasks for each pass of the design process. The passes are further decomposed into atomic steps that are represented as leaf-level Tasks and Activities. After the execution of each of these steps the resulting Design Artifact Representation becomes different reflecting the fact that each step of the process brings the process closer to the target final Representation – the tape-out of the Chip. This output is the native input for the visualization and sharing infrastructure, provided by the back-end functionality (SMW Connector, Fig. 10.1). At the same time, this provides a common interface for the consumption of process models and instances from other PSI-based design project and process management tools. From the perspective of process instances the solution resembles to some extent the ProM framework which defines the MXML format for expressing event logs. However ProM does not prescribe any terms for expressing process models. We observe that the use of the ontology, PSI Suite in our case, for expressing both process models and process execution logs is preferable in terms of integration for the purpose of informal process knowledge management. Furthermore, the Miner tool allows more complex queries of the mined design process steps, among which also queries related to times spent on particular steps, iterations, etc. For instance, it can be seen which designers executed a high number of activities (dcart in the example in Fig. 10.2) and wich artifact required these activities (AAMP in Fig. 10.2). The tabular interface allows browsing for more details in the results of a query – please refer to Fig. 10.2. Other information such as CPU time, duration of time spent by the designers per artifact or per step is also possible to query and visualize using the Miner interface. By checking the numbers for errors logged in the design process we observe that the median value was zero and the average value was around 2,600. However the maximum number of logged errors was over 1.5 million per activity while the sum was almost 13 million errors. The tool allows tracking down the project that generated these errors and the designer that was executing it. At a closer inspection, it can be seen that these errors occured during one iteration of the design of NV_RAIL. Details about the most frequent activities as well as their sequence executed within that design process can be visualized. These visualizations may further be used for taking remedial actions in a design process. In the example dataset the most frequent activity turns out to be Extraction_PRHO. This activity has normal accomplishments (there was no forced manual or automatic

200

V. Ermolayev et al.

Fig. 10.2 Designers, design artifacts and development activities mined from the U.S. dataset

Fig. 10.3 Details for the Extraction_PRHO activity

abortion), on average it takes about 30 min to complete (1,700,869 ms), low CPU time and low number of errors/warnings (Fig. 10.3). However, the second most frequent activity – SI_Analysis_Signoff – generally does not have a normal termination, on average demonstrates more errors and warnings, and on average takes over 3 h to be completed (Fig. 10.4). Due to the abnormal exists the duration of this activity is often not known (i.e. end time is not logged). The abnormal exits are correlated with unknown durations of activities.

10

Increasing Predictability and Sharing Tacit Knowledge in Electronic Design

201

Fig. 10.4 Details for the SI_Analysis_Signoff activity

10.4.3 The Front-End: Process Visualization and Discussion The front-end – ACTIVE DP Visualizer – for process visualisation and discussion of design projects is based on SMW and has been implemented by extending the existing process visualization approach (Dengler et al. 2009) and by developing additional result printers for SMW to visualize and export the WBS – namely the Gantt chart and the XML export result printers that are the part of the Mediawiki Semantic Project Management extension: (www.mediawiki.org/wiki/Extension: Semantic_Project_Management). The screenshots of the characteristic features of the DP Visualizer are shown in Fig. 10.5. This extension builds on the capability to query for semantic properties which is provided by SMW and displays query results as process graphs, Gantt charts or XML-files containing the WBS in XML schema to be further imported into MSProject. For the back-end a software connector has been developed that imports the knowledge stored in the Cadence Knowledgebase into the SMW pages (Fig. 10.1). Each element of the micro-ontology is represented as a wiki page containing annotated links to other wiki pages (properties). These properties are queried via an inline query language provided by SMW and the result is rendered into the destination format required by the different visualization libraries. For supporting collaboration the functionality for working with talk pages has been developed as another SMW extension (Fig. 10.6). Talk pages corresponding to visualized project elements can be created to discuss pros and cons of product structures, methodologies, WBS and project execution progress. This collaborative discussion functionality has been enhanced with semantics to add metadata to each comment and allow querying. Therefore special wiki templates (www.mediawiki. org/wiki/Help:Templates) and semantic forms (www.mediawiki.org/wiki/Extension:Semantic_Forms) have been developed. A summary icon is used to display corresponding discussion activities including the sum of pros and cons (Fig. 10.5) within the product structure, methodology, and Gantt chart visualizations.

202

V. Ermolayev et al.

a

Product Structure visualization

b

c

Generic Development Methodology visualization

Work Breakdown Structure with superimposed execution status

Fig. 10.5 Characteristic features of the Design Project Visualizer (a) product structure vizualization; (b) generic development methodology vizualization; (c) work break down structure with superimposed execution status

10

Increasing Predictability and Sharing Tacit Knowledge in Electronic Design

203

Fig. 10.6 Collaborative discussion functionality for managing invitations and working with arguments

10.5

Validation Setup and Results

The development of the fully functional prototype was conducted in an iterative design process focussed strongly on user needs and on the organizational requirements for the application. The chip design process is very demanding in terms of adherence to detailed technical requirements and standards, consequently we have to focus strongly on testing detailed user and design processes. Different types of tests were carried out throughout the development process. Each software version was tested repeatedly in a sequence of tests, where as a general rule the subsequent level of test was carried out after the lower level test returned a satisfactory result, usually after a number of iterations: • T1. Dry Runs and Technical Appropriateness: Experts and user representatives who are familiar with the application context assess if the software is bug-free and consistent with the requirements and suggest design improvements.

204

V. Ermolayev et al.

• T2. Usability in representative user tasks: User representatives and experts assess the software in representative tasks (Sect. 10.3) according to quality-of-use criteria and conformance to requirements. • T3a. Information quality for users: Experienced users assess the quality of information generated by the application. • T3b. User satisfaction, acceptance: Representative samples of users use the application in a realistic working context. User satisfaction and indicators for the likely acceptance of the application are measured. The validation results described here are part of T2 of the final application prototype, with a main objective to assure that the software is satisfactory and acceptable as a tool for the typical tasks of the prospective user population. The likely effect on productivity will be considered, but this is the main question to be answered in the subsequent T3 test.

10.5.1 Validation Plan The validation trials were planned in two phases and are defined by combinations of: (1) a software component; (2) a representative user task used as a frame for the validation; (3) an external tool used as a benchmark for the assessment; (4) a source dataset. The summary of the validation plan is given in Table 10.1. Generic validation workflows have been developed for all the kinds of validation trials (example in Fig. 10.7). These workflows, though identical in their nature and goals, differ in the use of validation metrics, instruments (kinds of the questionnaires to be filled in) and collaboration patterns – some are for individual execution while the other are for a group of collaborating trialists. Within the validation phases the set of validation tasks have been specified based on the typical user tasks. The generic workflows have been instantiated for each validation task. For example the task of validating usability (T2, Fig. 10.7) has been decomposed into four lower level tasks as pictured in Fig. 10.8. In turn each of these lower-level tasks have been performed using different instantiations of the generic validation workflow for T2 developed according to the validation scenarios of the particular lower level tasks. One example is given in Fig. 10.9. The summary of the front-end component validation plan at phase 1 is given in Table 10.2. The expert test persons either decided if specific requirements are met or not met (yes, undecided, no, unable to answer question), or made quality assessment on a 7-valued scale. Three separate on-line questionnaires with 75 questions in total were answered by each test person.

10.5.2 Validation Procedure The objectives of the validation was to verify that the Design Project Visualizer corresponds to the specified technical and functional requirements of users, and to

10

Increasing Predictability and Sharing Tacit Knowledge in Electronic Design

205

Table 10.1 Validation phases and types for different validated components Validated Dry Usability Information User satisfaction, Comment components runs for quality for acceptance of solutions (T1) typical users (T3a) (T3b) tasks Completeness Correctness (T2) Phase 1: Validation based on the simulated data. Verification tool – ProjectNavigator Back end A trialist assesses the components by DPE      performing a Front end typical task on a SS þ þ * *  simulated project. PV þ * * *  DC þ þ * *  LNL þ þ þ þ  Phase 2: Validation based on the U.S. dataset. Verification tool – CFI framework Back end A trialist assesses the components by DPE þ  þ þ þ performing a Front end typical task on a SS  þ þ þ þ real project that PV  þ þ þ þ has been DC   þ þ þ accomplished and LNL   þ þ þ logged in the past. DPE design process miner and instance extractor, SS semantic search component, PV design project visualizer, DC discussion component, LNL LiveNetLife component, “–” not validated, “*” partially validated because the data is simplified and artificial (simulated project), “þ” validated

Several Trialists (Participants)

Trialist (Moderator)

Test Component in a Typical Task

Fill-in the on-line Questionnaire

On-line Usability Questionnaire Assess Usability in Typical Tasks

Fig. 10.7 The collaborative generic workflow for usability (T2) validation trial

206

V. Ermolayev et al.

Validation Phase 1 (Simulated Data)

(T1) Dry Run

(T2) Usability for Typical Tasks

(T2.1) Usability for “Develop Product Structure”

(T3b) User Satisfaction and Acceptance

(T3a) Info Quality for Users

(T2.2) Usability for “Choose Development Methodology and form Development Team”

(T2.3) Usability for “Generate Work Breakdown Structure”

(T4) Field Test

(T2.4) Usability for “Monitor Project Execution”

Fig. 10.8 The hierarchy of validation tasks for usability validation (T2) at Phase 1. The lowest level corresponds to the typical user task based validation

Trialist (Moderator)

Examine Product Structure in CDNS ProjectNavigator

Test Semantic Search

Several Trialists (Participants)

Test Project Visualizer

Test Discussion Component

Test LiveNetLife

Fill-in the on-line Questionnaire

On-line Usability Questionnaire Assess Usability

Fig. 10.9 The instantiation of the generic validation workflow (T2) for the validation task T2.1 highlighted in Fig. 10.8 Table 10.2 Validated front-end components per a typical user task Typical user task Semantic Project Discussion search (SS) visualizer component (PV) (DC) Front-end Develop product structure * * þ Choose development methodology * * þ and form development team Develop work breakdown structure  * þ for the project Monitor the execution of the project  * þ

LiveNetLife (LNL)

þ þ  

validate the quality of use of the prototype with focus on the appropriateness of the functionality for the tasks of professional users. The test was performed by six professional experts with different roles in Cadence: Engineering director with profound expertise in design, verification and implementation; project manager; design project manager; knowledge engineer. The evaluation was based on a task scenario composed of four typical tasks with several sub-tasks each (described above). The test users performed the tasks on their own; the discussion task was carried out in cooperation with the other test users. After the completion of each task an on-line checklist for testing conformance

10

Increasing Predictability and Sharing Tacit Knowledge in Electronic Design

207

related to the task was completed. After executing the entire task scenario each expert completed an on-line questionnaire with questions about the quality of use of the prototype and the usefulness of the functionality for the task scenario. The three questionnaires were composed of standard and proven scales, and questions related to the specific functionality and context of the chip design process. The critical question to be answered is whether the prototype is sufficiently mature for further, full scale tests. The experts testing the prototype are representative of the decision makers who will decide the acceptance, and thus their decision determines the organizational acceptance of the solution.

10.5.3 Validation Results 10.5.3.1

Conformance with Technical Requirements

In total, 6 senior experts participated in the test. The resulting sample size was therefore too small for a statistical analysis. Hence, we discussed the results on a case-by-case basis putting focus on the justifications and explanations given by these experts in their assessments of the prototype. Overall, five of six professional experts have accepted and approved the Quality of the Design Project Visualizer, and four experts approved the Completeness of the Design Project Visualizer. The following reservations were formulated: One expert did not approve the Quality of the prototype because the software was not able “to fully visualize the complex structures, interfaces and correlations of Design Projects.” Two experts did not approve the Completeness of the prototype because of a “lack of flexibility, agility and completeness” of design project visualizations. Several experts were undecided about the quality and correctness of the Design Project Visualizer because some specific elements (for example interfaces between the functional blocks within a design artifact) while considered essential were not included in the simulated input data. Therefore quality and correctness could not be proven in this respect. For instance four experts were undecided whether the Gantt chart representation of Work Breakdown Structures indicates the progress of the project appropriately.

10.5.3.2

Conformance with Functional Requirements for the Discussion Component

The majority of experts (4 out of 5) agree that the functionality of the Discussion Component meets their requirements. One expert was unable to subscribe to discussions and thus did not exercise all of the functionality. Some experts are undecided about the functionality for summary boxes because the summary boxes

208

V. Ermolayev et al.

contained summaries for simulated design project data only. This may be an issue for further investigation, or at least a further test with real data.

10.5.3.3

Quality of Use of the Design Project Visualizer

The opinions about the visual presentations of product, generic methodology and Work Breakdown Structure descriptions are divided, ranging from somewhat positive to somewhat negative. All experts but one disagree or are undecided that the visual presentations are appropriate for performing the typical tasks of the task scenario. The information quality of the visualizations was doubted: “. . . a visual representation can only represent a part or a high level view of the overall process or working patterns”. The visualization of working patterns, dependencies, roles, tools, etc. are “too fragmented and difficult to connect for a non-savvy project manager”. “. . . the WBS or Gantt representation cannot capture the full content and properties which are needed to perform a design activity”. To conclude, the experts have raised doubts about the quality of use of the Design Project Visualizer.

10.5.3.4

Quality of Use of the LiveNetLife Component

The quality of use of the LiveNetLife component is judged positively. However, LiveNetLife is competing with tools which are currently in use at Cadence. LiveNetLife would have to demonstrate a differentiating benefit. It was observed that LiveNetLife does not compute the similarity with other users very reliably, a feature which might be an added value over competing tools.

10.5.3.5

Conclusions

The results of the validation of the Design Project Visualizer indicate that the solution can provide expert assistance to design project managers performing the typical tasks of project planning and execution management. According to the professional experts the conformance with requirements tested on the basis of simulated data in the Design Project Visualizer meet the technical and functional requirements. The critical statements of experts relate to added value. This must be proven by the information quality, which is the innovative feature enabled by semantic backend processes. The reservations may also be due to inconsistencies in the Knowledge Base. The next test will be conducted with a real data set. Apart from checking the information quality the objective of this test will be evaluating if the prototype can handle large and complex projects (scalability) – another important issue which must be investigated further using real data.

10

Increasing Predictability and Sharing Tacit Knowledge in Electronic Design

209

Overall, after repeated iterations the components of the prototype have achieved a mature level. The functionality for discussions meets the requirements and is judged to be satisfactory for users. The quality of use of the prototype overall fulfills minimum usability requirements, “though some features could have been implemented in a more functional and user friendly way. The reason is the lightweight nature of the basic platform (SMW)”. There is potential to improve semantic search, although users can cope with the shortcomings of semantic search because the navigation and browsing in the SMW works well. The added value of an innovative application is important for its acceptance and uptake. Diverse expert opinions about the added value of the Design Project Visualizer can be explained by the different roles of the experts. Engineers prefer to keep administrative work at a minimum level and therefore do not recognize the added value of the tool directly. Project managers currently collect administrative information manually (for example in project meetings). Automated data collection and representation in Gantt charts would be an added value for this group of users. The experts see the basic user functionality as acceptable but remain to be persuaded of the benefit of the new technology. Some experts asked how the Design Project Visualizer will improve the productivity. The prototype was compared with competing tools used at Cadence (e.g. the visualization of Functional Blocks, re-used IPs, IPs libraries and interfaces are already captured in existing Cadence tools). The experts fear that the integration of a Design Project Visualizer into their work processes may cause additional overhead (e.g. by having to ensure the consistency of several databases) instead of increasing productivity. High upfront cost for individual users incurs a substantial lag before benefits and added value are visible. Therefore users have to be convinced that improved information quality will offset the upfront cost. The added semantic backend-functionality should add significant value for users by providing them with information with higher (pragmatic) information quality. This should improve the cost/benefit ratio sufficiently to assure acceptance by the organization and individual users at the workplace. Further tests will be conducted to collect data on this issue.

10.6

Summary

The chapter presented the results of the case study of the ACTIVE integrated project on the use of knowledge process learning, articulation and sharing technologies for increasing the performance and decreasing the ramp-up efforts of knowledge workers managing designs of Microelectronics and Integrated Circuits. One of the most important characteristics of a design project in general and in this domain in particular is a very low proportion of the use of predefined workflows. Due to that the processes in engineering design are to a substantial extent informal. Instead of following rigid working patterns, the knowledge

210

V. Ermolayev et al.

workers exploit their tacit knowledge and experience for finding the most productive way through the “terrain” of possible process continuations. Design product structure and methodology knowledge is collected from the project manager and the members of the development team in a top-down manner. Design process execution knowledge is mined from process log datasets in a bottom-up fashion, fused, superimposed on the top-down knowledge, and further used for visualizing the design project plan and execution information in a way that suggests optimized performance, points to the bottlenecks in executions, and fosters collaboration in development teams. A project navigation paradigm has been developed that helps knowledge workers more easily find their way to a reliable outcome. This approach has been implemented in a software prototype – the Design Project Visualizer. The first results of the validation of the software prototype indicate that the solution is helpful in providing expert assistance to design project managers performing their typical tasks of project planning and execution management. The total cost/benefit improvement remains to be vindicated taking into account both organizational objectives and the fact that for some users, notably design engineers, additional overhead may be created by the tools. Acknowledgement The research leading to these results has been funded in part by the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement IST-2007215040.

References Andersson B, Bergholtz M, Edirisuriya A, Ilayperuma T, Johannesson P, Gordijn J, Gre´goire B, Schmitt M, Dubois E, Abels S, Hahn A, Wangler B, Weigand H (2006) Towards a reference ontology for business models. In: ER’06: Proceedings of the 25th international conference on conceptual modeling, Springer-Verlag, Berlin, Heidelberg Bock C, Gr€uninger M (2005) PSL: a semantic domain for flow models. Softw Syst Model 4 (2):209–231 Crapo A W, Waisel L B, Wallace W A, Willemain T R (2000) Visualization and the process of modeling: a cognitive-theoretic view. In: KDD’00: Proc. 6th ACM SIGKDD international conference on knowledge discovery and data mining, ACM, New York Dello K, Nixon L, Tolksdorf R (2008) Extending the Makna Semantic Wiki to support workflows. In: Lange C, Schaffert S, Skaf-Molli H, V€ olkel M (eds) Proc. 3rd Semantic Wiki Workshop, CEUR-WS.org/Vol-360, ISSN 1613–0073, pp. 119–123, online Dengler F, Lamparter S, Hefke M, Abecker A (2009) Collaborative process development using Semantic MediaWiki. In: Proceedings of the 5th conference of professional knowledge management, Solothurn, Switzerland Dietz JLG (2006) Enterprise ontology: Theory and methodology. Springer Verlag, Berlin Dorn C, Burkhart T, Werth D, Dustdar S (2010) Self-adjusting recommendations for peopledriven ad-hoc processes. In: Hull R, Mendling J, Tai S (eds) Business process management, Lecture Notes in Computer Science. Springer-Verlag, Berlin, Heidelberg Drucker PF (1969) The age of discontinuity: guidelines to our changing society. Heinemann, London

10

Increasing Predictability and Sharing Tacit Knowledge in Electronic Design

211

Ermolayev V, Keberle N, Matzke W-E (2008) An upper level ontological model for engineering design performance domain. In: ER’08: Proceedings of the 27th international conference on conceptual modeling, Springer-Verlag, Berlin, Heidelberg Ermolayev V, Ruiz C, Tilly M, Jentzsch E, Gomez-Perez JM (2010b) A context model for knowledge workers. In: Proceedings of the 2nd international workshop on context, information and ontologies (CIAO 2010), CEUR-WS.org/Vol-626, ISSN 1613-0073 Ghidini C, Kump B, Lindstaedt S, Mahbub N, Pammer V, Rospocher M, Serafini L (2009) Moki: the enterprise modelling wiki. In: The semantic web: research and applications, Lecture Notes in Computer Science. Springer, Berlin, Heidelberg Grebner O, Ong E, Riss U, Brunzel M, Bernardi A, Roth-Berghofer T (2006) Task management model. NEPOMUK project, deliverable D3.1, http://nepomuk.semanticdesktop.org/xwiki/bin/ view/Main1/D3-1, Accessed date 5 Aug 2011 Grobelnik M, Mladenic´ D, Ferlezˇ J (2009) Probabilistic temporal process model for knowledge processes: handling a stream of linked text. Conference on data mining and data warehouses (SiKDD 2009), Ljubljana, Slovenia Gronau N, M€uller C, Korf R (2005) KMDL – capturing, analysing and improving knowledgeintensive business processes. J Univ Comput Sci 11(1):452–472. doi:10.3217/jucs-011-040452 Gr€uninger M, Atefy K, Fox MS (2000) Ontologies to support process integration in enterprise engineering. Comp Math Org Theor 6(4):381–394. doi:10.1023/A:1009610430261 Hepp M, Roman D (2007) An ontology framework for semantic business process management. In: Oberweis A, Weinhardt C, Gimpel H, Koschmider A, Pankratius V, Schmizler B (eds): eOrganisation: Service-, Prozess, Market-Engineering, 1, Universitaetsverlag Karlsruhe Hingston P (2002) Using finite state automata for sequence mining. Aust Comput Sci Commun 24 (1):105–110. doi:10.1145/563857.563814 Jacquemont S, Jacquenet F, Sebban M (2009) Mining probabilistic automata: a statistical view of sequential pattern mining. Mach Learn 75(1):91–127. doi:10.1007/s10994-008-5098-y Kr€otzsch M, Vrandecic D, V€ olkel M, Haller H, Studer R (2007) Semantic wikipedia. J Web Semantics 5(4):251–261. doi:10.1016/j.websem.2007.09.001 Leuf B, Cunningham W (2001) The wiki way: collaboration and sharing on the internet. AddisonWesley, Upper Saddle River, NJ Mayer R, Menzel C, Painter M, Witte PD, Blinn T, Perakath B (1995) Information integration for concurrent engineering (IICE) IDEF3 process description capture method report, Knowledge Based Systems Inc., College Station, Texas Nonaka I, Takeuchi H (1995) The knowledge-creating company. Oxford University Press, New York Rabiner LR (1990) A tutorial on hidden Markov models and selected applications in speech recognition. In: Readings in speech recognition. Morgan Kaufmann Publishers Inc., San Francisco Ryu K, Y€ucesan E (2007) CPM: a collaborative process modeling for cooperative manufacturers. Adv Eng Inf 21(2):231–239. doi:10.1016/j.aei.2006.05.003 Scheer A-W, Jost W (2002) ARIS in der Praxis. Springer Verlag, Berlin Schreiber G, Akkermans H, Anjewierden A, de Hoog R, Shadbolt N, van de Velde W, Wielinga B (1999) Knowledge engineering and management: the CommonKADS methodology. MIT Press, Cambridge, MA Sˇtajner T, Mladenic´ D (2010) Modeling knowledge worker activity. In: Proceedings of the workshop on applications of pattern analysis, Cumberland Lodge Sˇtajner T, Mladenic´ D, Grobelnik M (2010) Exploring contexts and actions in knowledge processes. In: Proceedings of the 2nd international workshop on context, information and ontologies (CIAO 2010), CEUR-WS.org/Vol-626, ISSN 1613-0073 Tilly M (2010) Dynamic models for knowledge processes. Final models. ACTIVE project deliverable D1.2.2, http://www.active-project.eu/publications/deliverables.html, Accessed date 5 Aug 2011

212

V. Ermolayev et al.

Uschold M, King M, Moralee S, Zorgios Y (1998) The enterprise ontology. Knowl Eng Rev 13 (1):31–89. doi:10.1017/S0269888998001088 van der Aalst WMP, Song M (2004) Mining social networks: uncovering interaction patterns in business processes. In: Proceedings of the international conference on business process management (BPM 2004), Lecture notes in computer science. Springer-Verlag, Berlin van Dongen BF, de Medeiros AKA, Verbeek HMW, Weijters A, van der Aalst WMP (2005) The ProM framework: a new era in process mining tool support. In: Application and theory of Petri nets. Springer, Berlin, Heidelberg Warren P, Kings N, Thurlow I, Davies J, B€ urger T, Simperl E, Ruiz Moreno C, Go`mez-Pe`rez JM, Ermolayev V, Ghani R, Tilly M, B€ osser T, Imtiaz A (2009) Improving knowledge worker productivity – the ACTIVE integrated approach. BT Technol J 26(2):165–176 Woitsch R, Karagiannis D (2005) Process oriented knowledge management: a service based approach. J Univ Comput Sci 11(4):565–588. doi:10.3217/jucs-011-04-0565

Part IV

Complementary Activities

11

Some Market Trends for Knowledge Management Solutions Jesus Contreras

11.1

Introduction

The networked economy is based on the ability of companies to transform knowledge into value and take profit from it. Most of the companies are focused on creating added value products and services and optimizing all business processes to be able to compete in a globalized market. There are three critical factors companies are interested in: • The ability create value and differentiate from competitors • The ability to improve business processes • The ability to speed up the time-to-market The knowledge as a collection of experiences, strategies and practices within an organization may positively influence all of these factors. The more valuable and available is the knowledge needed to perform, improve or even create business processes, the more value is created for the organization. Traditionally Knowledge Management is the discipline in charge of ensuring the availability and the quality of internal knowledge in organization. Today, with the recent penetration of web and web 2.0 technology and paradigms into organizations, traditional knowledge management is re-focused as “Collaboration and Communication” or sometimes “Enterprise 2.0”. These labels are not equivalent, but many times they may refer very similar solutions and often they compete for the same budget. Modern knowledge management, collaboration and communication or Enterprise 2.0 often includes some of the following competences:

J. Contreras (*) iSOCO, Intelligent Software Components, S.A., Avenida Del Parteno´n, 16-18, Madrid, 1 7a 28042, Spain e-mail: [email protected] P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5_11, # Springer-Verlag Berlin Heidelberg 2011

215

216

– – – – – – – – –

J. Contreras

Group and Community Management Discussion and Blogs Resource Sharing (Documents, Experiences, News, Ideas, etc.) Search and Information Retrieval Collaborative Editing Profile and Role Management for Employees Incentives and Rewarding by Contribution Collaborative Project Management Business Process Enhancement with Knowledge and Collaboration Concepts

From the technology point of view these competences include the following functionalities to work well: • • • • • •

Search: allowing users to search for other users or content Links: grouping similar users or content together Authoring: including blogs and wikis Tags: allowing users to tag content Extensions: recommendations of users; or content based on profile Signals: allowing people to subscribe to users or content with RSS feeds

11.2

Economic, Marketing and Research Challenges

In this section we introduce the economic, marketing and scientific challenges that need to be overcome to permit further evolution of knowledge management solution into the mainstream market.

11.2.1 Economic Challenges Economic conditions affect availability of capital, cost and demand. Economic and market globalization drives the need for new, more dynamic modes of production in the face of strong international competition. These factors are likely to be favorable for social and collaboration solutions adoption as knowledge management in many industries becomes more diverse and geographically distributed and competitiveness is determined by productivity. This encourages the adoption of the more open and interoperable IT systems that run global business. Competitiveness based on innovation and marketing/branding also provides opportunity for using collaborative solutions, particularly for intelligent information management. The recession of 2008–2009 and the unprecedented speed of the collapse in the financial markets – and then the organisations that relied upon financial institutions’ credit – have created a challenging moment for realising the potential of knowledge management. This, however, will provide vendors with an even larger opportunity and a big

11

Some Market Trends for Knowledge Management Solutions

217

challenge for demonstrating a clear ROI and business case for deploying this new generation of technologies. • Cost Reduction: Cost reduction is a universal requirement in current market conditions, including cost optimisation: not only lowering expenditures but also providing the quality in services and products expected by end customers or consumers while managing the financial and business risk. Cost reduction is driven by the need: ∘ To achieve efficient performance in specific operational business processes, ∘ To achieve or improve a competitive advantage – strategic, i.e. cost leadership, ∘ To manage financial distress and corporate recovery, • Sustainable Innovation: Sustainable innovation for new market creation, market share improvement and faster time-to-market are the result of a continuous, more internetworked economy which dictates the need for interlinked and coevolving products and services in the market. This demands a constant flow of innovation in a sustainable commercialisation process. Enterprises are under pressure to boost innovation by adapting and responding to market conditions and customer needs, which also are evolving at an ever increasing pace. This drives the enterprise’s need to have access to the right information at the right time so as to constantly fine-tune the product/service offering.

11.2.2 Marketing Challenges According to some experts there are several challenges that need to be addressed by any knowledge management solutions according to the phase of the project: • Decision phase: When a knowledge management solution is presented to the organization’s decision-makers, there are two challenges: ∘ Cultural change: The resistance to change is one of the strongest barriers in the decision process. Knowledge management may change the usual way of working and may require an additional effort from the employees to maintain the system with no immediate return. ∘ Unclear ROI calculation: Since there is no clear return on investment method (similar to knowledge management market or any other intangible value) it is difficult to argue with financial benefit figures when facing potential buyer. At least the total cost of ownerships needs to be calculated in order to ensure full support from the managerial structure. Some recent works1 on process

1 Patrick Lambe: “How to Use Key Performance Indicators in KM Initiatives” 2007 (www. stratsknowledge.com)

218

J. Contreras

management have identified key performance indicators for KM allowing for clear measurements and trend detections. Introducing measurement methodology possibly linked with business indicator (e.g., balanced scorecard) may help overcoming the ROI calculation weakness. • Usage and maintenance phase: When a knowledge management solution is already in place, there are a number of remaining challenges: ∘ Critical mass achievement: knowledge management may fail before achieving critical mass of users. Despite good starting interest, knowledge management may never jump from single department or small initial group to whole companies. Consultancy for monitoring and corrective actions may help avoiding the premature death of the solution. ∘ Focus on tools rather than on the problem: Knowledge management tools are introduced with no clear causal relation to any concrete problem or business process. The purpose is vague and employees have disparate expectations. ∘ Lack of support from managers (lack of resources): Since knowledge management adoption needs time and dedication from the employees, it is crucial to have direction and managerial support. Activities such as training, maintenance, moderation or incentives are critical during the whole life cycle of the enterprise 2.0 solution. It is also necessary to include different departments into the whole decision and adoption process: IT, HR, Marketing and Finance. ∘ Infrastructure change: IT integration used to be an important inhibitor due to the existence of legacy systems.

11.2.3 Research Challenges There are several technology and research challenges, the solution to which may accelerate the adoption of knowledge management solutions into corporations. Traditional technology bottlenecks are usually related to the knowledge acquisition phase, where traditional solutions fail due to low quality of information gathered and limited user contribution. The challenge may arise where traditional technology is not able to automate the knowledge acquisition as could be the case for multilingual and multimedia sources: • Multilingualism is an upcoming challenge for many suppliers. Typically current solutions are either applied to English or only a limited number of home market languages. Solutions for multi-lingual technologies are expected from language-specific modular add-ons to existing products, i.e. parsers and semantic analysis for specific languages.

11

Some Market Trends for Knowledge Management Solutions

219

• Spoken-language understanding (or generation) as well as machine translation are not in the focus of current or near-term planning. • Video: visual support has become key to knowledge management application. Techniques of story-telling, lessons-learnt or best practices are more often stored in audio-visual support improving the end-user consumption experience. Videos need to be analyzed in an automatic way and included in the overall knowledge life cycle. In addition to the traditional knowledge management bottleneck, knowledge representation, storage, manipulation and delivery could also represent a technology challenge, especially for large industrial adoption of these kinds of solutions. The definition of a common and standard data interchange language for knowledge representation across industries is still not satisfactory to enable interoperation across a broad range of sources. A considerable effort has been made in the last 5 years to achieve syntactical standards for the representation of semantics; i.e. for the definition of languages useful for the description of data content, contextual information, etc. But there are still missing standards for expressing business vocabulary for sectors (e.g.: how to express market intelligent data, personal skills or product description in a specific sector). With semantic technology knowledge is represented using formal representation on a high conceptual level and the acquisition is done on a seamless way with minimal user involvement. For instance: a semantically enabled idea management portal can automatically identify similar ideas (even when they do not share common words or expressions) and suggest authors to collaborate and elaborate a joint initiative. In this case semantic technology allows for workload reduction providing fewer ideas to check, with higher degree of collaboration and peer-review. Knowledge management efforts may seem useless if the there is no efficient consumption or exploitation phase in the knowledge life cycle. The possible return on the investment is highly dependent on the way the knowledge is delivered, to whom and under what circumstances. That is why the notion of context gains importance when talking about knowledge delivery. For instance, the employee context: where is he/she, the type of device, type of ongoing task or process, type of knowledge, social context, time dependency, etc. are variables that need to be taken into account for precise delivery.

11.3

Potential market

Nowadays productivity and efficiency needs are driving potential technology evolution within companies. Among others concepts, collaboration, innovation or communication are key functionalities demanded by potential customers. The traditional knowledge management market has been extended into a new market for communication, collaboration and social networking solutions for the enterprise. This new market definition for knowledge management is still

220

J. Contreras

a heterogeneous concept, and includes solutions for productivity and collaboration support, sometimes called Enterprise 2.0 or Social Software in the Workplace (Drakos et al. 2009). According to Forrester Research forecasts (Young 2008) done before the last financial downturn, the potential market may achieve US$4.6 billion by the 2013, a similar size to the current Content Management Systems (CMS) market. In the last 2 years, and despite the downturn, the worldwide market for social software was estimated to grow about 15% from 2009 to 2010, and another 16% to 2011 up to $769 million in 2011 worldwide (Gartner 2010). Knowledge management solutions as discussed in this book provide technology for better knowledge sharing and personnel performance by enhancing traditional applications to become more easy to use, predictive and intelligent. Despite this possible technology differentiation these solutions will be competing for similar budget as any traditional knowledge management or enterprise 2.0 provider, since they aim to solve similar problems. Looking at detailed tools that usually form knowledge management or collaboration and communication solutions, and according to Forrester Research report, there is a clear growing potential for corporate social networking as seen in Fig. 11.1. In addition to strategic forecast in the same report, some potential customers and users have expressed their buying intentions. When asked about the buying decision, more than 50% of companies over 1,000 employees answered they are currently buying or considering enterprise 2.0 solutions (see Fig. 11.2.)

11.3.1 Customer Needs and Perceptions Potential customers understand that the usage of collaboration tools will help the corporations with knowledge sharing and cost reduction (effort and time) for some critical processes. Figure 11.3 shows the result of a survey on buying decisions. Even if team-work and knowledge-sharing are the most popular drivers for collaboration solution adoption, the overall lack of understanding is one of the most mentioned inhibitors, as shown in Fig. 11.4. The value perception (understanding,

Fig. 11.1 Sales forecast, as before the worldwide crisis, of social software features, data taken from Forrester report (Young 2008)

11

Some Market Trends for Knowledge Management Solutions

Fig. 11.2 Buying decision according to company size (Source Young 2008)

Fig. 11.3 Drivers for collaboration tools (Source [Miles 2009])

Fig. 11.4 Inhibitors for collaboration tool (Source Miles 2009)

221

222

J. Contreras

priority, cost and return of investment) together with corporate cultural barriers seem to be the main inhibitors for the adoption of knowledge management solutions. Very similar to traditional knowledge management solutions, enterprise 2.0 encounters difficulties presenting compelling selling arguments. All functionalities are ‘nice to have’ instead of ‘must to have’ and there is no clear way to perceive value. On the one hand drivers that would reinforce a possible decision to buy are related with the potential efficiency improvement on knowledge intensive tasks. On the other hand there have also arisen new paradigms of corporate value which include knowledge management and collaboration as part of business indicators. Despite the fact that these features are very difficult to measure, some indicators are visible in companies and sectors where knowledge intensive tasks are part of the critical mission and where the knowledge retention is crucial to the cost control. The current opportunity relies in the fact, apparently contradictory, that on the one hand companies, due to global competence and outgoing crisis, urgently need to boost productivity of knowledge workers and the knowledge management intuitively may help, and on the other hand any buying decision will need a clear business case with explicit ROI calculation, very difficult to perform for such intangible assets as the corporate knowledge. Tools and services able to link collaboration, knowledge management and innovation with financial and market indicators will find fewer inhibitors during the buying process.

11.3.2 Supply Side Gartner’s overview of the supply side (well known magic quadrant) shows the clear leadership of three companies: Microsoft, Jive and IBM that are offering complete solutions for internal social and collaboration management. After some years the market is getting more mature: fewer players in niche players and challengers sections, as well as stable position in the leaders’ area. In the ACTIVE R&D project researcher have performed a closer analysis on 40 of the providers that operate on the knowledge management, collaboration and enterprise 2.0 market. (The complete list is shown in Table 11.1.) Table 11.1 List of providers analyzed Alcatel-Lucent Ektron Atlassian Emantix Blogtronix EMC blueKiwi EpiServer BlueNog eTouchSystems Box FatWire CentralDesktop Google ConnectBean Huddle CubeTree IBM Customer Vision iGLOO

Leverage Software Liferay Liquid Planner Microsoft MindTouch Mzinga Neighborhood America Novell Open Text Oracle

Realcom Saba Siteforum SmartPoint SocialText Telligent ThoughtFarmer Tomoye Traction Software Twiki

11

Some Market Trends for Knowledge Management Solutions

223

The purpose of this overview was to identify some possible ongoing strategies that these companies use to reach the market. A quick look at the names shows that there are a set of companies offering complete solutions for knowledge management and collaboration covering most of the functionalities announced in the introduction of this chapter (IBM, Microsoft, Oracle, Fatwire, etc.) and another set of companies that offers a single piece or specialized functionality (CubeTree, Liferay, Atlassian, etc.) covering just one or a few functionalities. • Complete solutions versus niche player: ∘ Big players turn their traditional products into social software for enterprises. That is the case for IBM, Novell, Oracle, Microsoft and EMC. ∘ Small players are mainly offering SaaS solutions with typical functionalities: blogs, wikis, file sharing, RSS, communities and groups management, instant messaging. These have become commodity and the competition is on price (from US$5 per user/month). ∘ Some companies focus on vertical, niche markets, such as health, software development and project management or e-government. ∘ Integration is key feature in small players. ∘ Some companies offer complete solutions on their own or in cooperation (e.g.: Lucent in partnership with BlueKiwi). From the feature point of view the findings are the following: • Features: ∘ Only a few solutions can interoperate with business processes. ∘ No solutions mention ‘informal knowledge processes’ or ‘predictive behavior’. ∘ Only a few solutions (Huddle, Smartpoint) work within the desktop. A standard is to offer a platform or web solution. ∘ Mobile access is becoming a commodity. ∘ Open source platforms (Liferay, Drupal) are offering some basic functionalities for free.

11.3.3 Marketing and Pitch Like any technology based solution, knowledge based solutions need to elaborate the message to different decision takers: • Final user: People who will use solutions based on knowledge management and related technologies. At this current stage of internal social and collaboration management software, final users are usually considered a positive driver for adopting these kinds of solutions (see Fig. 11.5). Productivity, less effort and easy-to-use argument will help in any commercial approach.

224

J. Contreras

CEO Mid-Level Business Managers Senior/Executive Business Managers CIO/CTO IT Managers Users 0%

5% 10% 15% 20% 25% 30% 35%

Fig. 11.5 Drivers by user group (Data taken from Miles 2009)

• IT managers: These are responsible for integration and maintenance of the solution and need to ensure a smooth integration into their existing architecture with controlled change management and maintenance. IT departments usually are ahead in new technology adoption for their internal purposes (see Fig. 11.6) and that may serve as a beachhead for further extension within the company. • Business or financial buyer Such managers, e.g., CEO, CFO, Head of HR, etc., are responsible for the strategic aspect of their business evaluating the cultural and cost/benefit impacts of the solution. Arguments about productivity measures and growth, ROI, innovation culture and employees’ satisfaction are a good option for a commercial approach.

11.3.4 Unique Selling Proposition The differentiation of collaboration based and semantically and context-aware enhanced solutions from traditional knowledge management and collaboration tools relies on the usage of emerging technologies that are able to handle behavior in a more intelligent and user-friendly way. • Informal processes: The integration of knowledge management tools into corporate business processes has become a strong requirement to ensure the success of any initiative. The pre-existence of well defined and identified business processes is critical to fulfill this requirement. Only a few organizations are mature enough, from the management point of view, to provide flexible and useful process descriptions to permit the integration of knowledge management tools and/or measures. Semantic and context technology allows both the automatic identification and discovery of personalized processes and the provision of added value on top of them.

11

Some Market Trends for Knowledge Management Solutions

225

No Department All Departments Legal Finance Admin Human Resources Sales R&D Customer Support Training Other Operations Marketing IT 0%

20%

40%

60%

80%

Fig. 11.6 Departments demanding potential KM and collaboration solution (Data taken from Miles 2009)

• Structured and unstructured data integration: A lot of knowledge is stored in structured and non-structured sources within the organization information systems. The usage of semantic technology allows for conceptual discovery and integration of the knowledge across the whole organization fostering collaboration and value creation. • Privacy: The typical KM scenario is collaborative, decentralized and heterogeneous, where knowledge is defined, used and shared across different groups and domains. Articulating enterprise knowledge in the form of knowledge processes allows users to create social relationships and form working and interest-based groups beyond their own domain and organization (Ruiz-Moreno et al. 2009). • Incentives: Cooperative behavior is generally not easily rewarded with material rewards. An obstacle is that the definition of fair and effective incentives requires the availability of transparent measures of performance. The organizational context (enterprise strategy, organizational structure, and processes) determine many aspects of human resource management principles (and thus available incentives), cooperation, and knowledge management principles (which may be based on codified or personalized knowledge). In order to define effective incentive systems, these organizational issues must be analyzed and taken as constraints. A number of factors, such as career situation, experience, personality, and others are likely to affect individual cooperative behavior, and may not be easily affected by incentives (B€osser 2009). • Cost-benefit information: This can influence decisions in many stages of the life cycle of physical or digital products. Besides that, large efforts are spent in collaborative knowledge engineering projects and there is no objective judgment possible, whether these processes are cost-effective or not and if certain actions are beneficial to the whole process or beyond.

226

J. Contreras

11.3.5 Pricing Since the value of knowledge management, social or collaboration tools is not always fully perceived, but the topic is still on the radar of potential customers, there are some niche or small providers that are achieving good market share figures adopting a low-cost strategy. There are some (mainly small and medium companies) that offer their solutions from about US$5 per user – month with special plans for large companies. The use of SaaS (Software as a Service) has permitted pay-per-use business models with almost no risk for the buyer. The basic functionalities of enterprise-2.0 like wikis and blogs are adopted by corporations, with no actual interaction with corporate information systems, as commodities with no perceived differentiation of value. This is not a mainstream trend but could be an excellent opportunity for niche players that are not willing or able to integrate their solution with big players.

11.4

Conclusions

The potential market for knowledge management and collaboration solutions is growing, especially thanks to the expansion of the Web 2.0 culture. Collaboration and social software is penetrating large corporations even if there are still difficulties at the corporate level in perceiving the added value of knowledge management. In a short time horizon there is a need to relate knowledge management, collaboration and social solutions with business indicators such as productivity, innovation or customer satisfaction in order to counteract the effects of the current recession on the IT market. There is also need for compelling success stories to convince decision takers. A few big players are leading the offerings since they include knowledge management features over well established platforms with an extensive customer base. There are several strategies to reach the mainstream market: • Build on top of existing platforms offering value added features. • Become a niche player with specific applications or in a specific sector or area. • Replace existing platforms with alternatives (other desktop platform, web applications, Saas model, mobile devices, etc.) To become a successful player there are some technological or methodological challenges any provider will need to address: • Privacy is becoming critical issue in any social or collaboration application. Underestimation of this topic may lead to the complete failure of any initiative. • Multimedia and multilingualism is already a basic requirement for potential customers.

11

Some Market Trends for Knowledge Management Solutions

227

• Methodology and professional service around deployment, business process management, incentive policies and measurements will allow for transformational project in large organizations. In the mid or long-term timeframe, the forthcoming change of organizations and companies to more open, geographically distributed, collaborative and productivity based structures is a great opportunity for IT suppliers to position themselves around this change and help companies to adapt their workplace and culture to the new reality.

References B€osser T (2009) ACTIVE D4.3.1 “Analysis of incentives in knowledge management and Web2.0 applications” http://www.active-project.eu. Accessed 16 Jan 2011 Drakos N, Rozwell C, Bradley A, Mann J (2009) Magic quadrant for social software in the workplace, 22 Oct 2009, Gartner RAS Core Research Note G00171792 Gartner (2010) Gartner says worldwide enterprise social software revenue to surpass $769 Million in 2011, Gartner press release. http://www.gartner.com/it/page.jsp?id¼1497215. Accessed 16 Jan 2011 Miles D (2009) Collaboration and Enterprise 2009, AIIM Industry Watch. http://www.emc.com/ collateral/analyst-reports/aiim-emc-collaboration. Accessed 26 June 2009 Ruiz-Moreno C, Go´mez-Pe´rez J, Contreras J (2009) ACTIVE deliverable 3.4.1 security in knowledge processes: http://www.active-project.eu. Accessed 16 Jan 2011 Young G (2008) Global enterprise web 2.0 market forecast: 2007 to 2013 forrester research

12

Applications of Semantic Wikis

12.1

Business Applications with SMWþ, a Semantic Enterprise Wiki

Michael Erdmann, Daniel Hansch

12.1.1 Introduction MediaWiki (http://www.mediawiki.org/wiki/MediaWiki) is the technical basis of many wikis, including the online encyclopedia “Wikipedia”. The free software is a web-based content management system that supports easy linking of articles, which every user can read and edit. Wikis, which are built upon the MediaWiki software, establish an asynchronous web-based communication and collaboration platform. Their users become communities, make information available quickly and jointly develop and share information. Operators of such wikis benefit from easy installation procedures, low cost of operation, the robustness of the system and from low training requirements for its users. Wikis are thus a flexible tool for collaboration on the Web. However, wikis are not designed for entering, managing or making structured data available. For example, compare the population of London specified in the German Wikipedia article “List of largest cities in the EU” with the figure given in the “List of megacities”. You will notice different values. It is also impossible to get a list of all cities whose population ranges between two and three million using standard MediaWiki. Such lists must be researched, created and maintained in a manual, i.e. time-consuming way. Existing data values cannot be explicitly marked-up as such and the unstructured textual information is not machine-readable. The above mentioned shortcomings are addressed by Semantic MediaWiki,1 the semantic extension to MediaWiki described in Chap. 3. Users can assign categories

1

http://semantic-mediawiki.org, cf. (Kr€ otzsch et al. 2007)

P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5_12, # Springer-Verlag Berlin Heidelberg 2011

229

230

M. Erdmann and D. Hansch

as well as properties to wiki articles. To stay with the example above, “London” is a “City” and has a specific population number. In addition, explicit relationships between wiki articles can be created. For instance, “London” can be related to its country “England” via a “located in” relationship. The now explicit data can be accessed in all wiki pages, e.g. to generate dynamic lists. Semantic MediaWiki provides a special language to formulate so-called inline queries, which can automatically create lists, e.g. the “List of megacities”. Users can make use of these semantic features by utilizing special wiki markup, which requires them to learn the query- and annotation syntax. This makes the adoption of Semantic MediaWiki in commercial settings, where usability is a success factor, hard to achieve.

12.1.1.1

SMWþ Addresses Enterprise-Level Requirements

SMWþ, a professionally developed software product from ontoprise2, includes Semantic MediaWiki and addresses the requirements posed in corporate environments: usability, reliability in daily operation, scalability, expressivity, interoperability and professional services. Usability enhancements (Pfisterer et al. 2008) to Semantic MediaWiki, which were developed by ontoprise within project Halo3, support casual users efficiently in applying the semantic features in their daily work. Scenarios, which require access to external data sources or the evaluation of business rules for query answering are supported by the ontoprise product TripleStoreConnector (TSC) which is realized on top of OntoBroker, ontoprise’s industry-grade reasoning engine. SMW+ distinguishes itself from other enterprise wikis regarding the extent to which knowledge can be formalized and evaluated in the wiki. SMW+ integrates well with the existing tool-landscape of an enterprise. For instance, users can include rich text from Microsoft Office documents in the wiki by copying it into the WYSIWYG editor. Connectors to Microsoft Word, Microsoft Excel and Microsoft Project make annotated data in the wiki available in these tools. Data from heterogeneous data silos in the enterprise is made available to wiki users by the semantic data integration features. This data can also be used to generate reports and visualize data. By entering commercial support contracts with ontoprise, businesses receive immediate and professional support, for example to adapt the wiki to their specific needs. In this chapter we will report on the experiences we and our customers gained by using SMWþ. We will first describe tasks, which can be supported by SMWþ and then present actual use cases that demonstrate the versatility of SMWþ.

2 3

Product web site for SMW+ and TSC: http://wiki.ontoprise.com/ Project Halo is funded by Vulcan Inc., http://www.projecthalo.com

12

Applications of Semantic Wikis

231

12.1.2 Achieving Knowledge Tasks in SMWþ 12.1.2.1

User Roles in Semantic Wikis

When applying SMWþ to a concrete use case we typically identify four primary user roles: knowledge consumers, knowledge providers, knowledge architects and collaboration managers. Other, secondary roles are knowledge engineering experts, wiki application experts and administrators. Knowledge consumers and knowledge providers have complementary roles. The group of consumers typically is the largest group and uses the wiki for reading or exploring its contents. The knowledge providers contribute this content by creating and writing articles or annotating data. Accordingly, consumers value efficient methods to explore the wiki and to retrieve data and text. Providers, however, are specifically interested in efficient authoring and annotation tools, which lead to high-quality data and appealing wiki articles. Users taking the role of a knowledge architect create the wiki ontology (i.e. categories and properties) and templates and forms, or integrate web service and inline queries into articles. If many users are working in the wiki within a particular workflow (e.g. within the same project) then their interactions must be adjusted and organized to ensure workflow compliance and data quality and consistency. The collaboration manager takes this role and uses the framework given by the knowledge architect to guide the community. In contrast to the knowledge architects who know their domain well, highly specialized knowledge engineering experts are skilled in creating advanced rules and queries as well as in the handling of complex ontologies. Wiki application experts can create advanced page layouts, templates and forms (so called wikitext programming). Finally, administrators take care of all technical aspects like installing software upgrades or creating database back-ups. In the following we explain which tools are provided by SMWþ to serve the particular requirements of the above user roles. 12.1.2.2

Authoring Articles and Annotating Data

Contributors typically interact with the wiki by creating articles and entering rich text into the WYSIWYG editor that supports formatted tables and page designs in a Word-like manner. It also allows embedding media files such as documents, images, audio and videos. Finally, users can include queries into the WYSIWYG editor which are rendered as dynamic lists, tables or sophisticated data diagrams (Fig. 12.1). Besides the unstructured content that is provided by contributors using the WYSIWYG editor, they are given various tools to author data in articles (so called annotations). The Semantic Toolbar is displayed alongside the WYSIWYG editor and gives a detailed overview of all annotations which are present in the article. It provides options to inspect, create and alter the annotations (Fig. 12.2).

232

M. Erdmann and D. Hansch

Fig. 12.1 The WYSIWYG editor comes with rich text editing capabilities

The Advanced Annotation Mode, available also via the WYSIWYG editor, provides a method to annotate data in an article. The user marks a relevant text area and assigns it to a property interactively. To support users in the annotation process, the software can consider schema information about the type of properties, e.g., providing auto-completion when choosing appropriate properties. An alternative way to annotate data in articles is provided by semantic forms (Fig. 12.3). Articles, which are associated with a form, can be edited in a form mode allowing users to fill in pre-defined form fields with data values. Each form field comes with an auto-completion feature proposing suitable values. Knowledge can not only be added directly to wiki articles but can also be expressed implicitly via logical rules. The user formulates rules by means of rule editors that support the authoring of calculation, definition and property chaining rules. The TripleStoreConnector which can be installed along with SMWþ, executes these rules and generates automatically (i.e. infers) new data which become accessible in the wiki.

12.1.2.3

Exploring the Wiki and Querying for Data

Information consumers require efficient tools to explore a wiki and to retrieve data precisely. The full-text search engine in SMWþ returns relevant search hits coming

12

Applications of Semantic Wikis

233

Fig. 12.2 Enter and modify annotations with the semantic toolbar

from wiki articles or from uploaded Microsoft Office- or PDF documents. The search interface supports full text search, Boolean operators, auto-completion and spell checking (“did you mean?”). The search results are augmented with semantic data to help assessing the relevance of search hits immediately. The semantic tree view supports contributors and consumers in exploring the contents of a wiki. Data (categories, articles or annotated data) are displayed in the hierarchical (tree-) view which is always automatically updated whenever the underlying data change. On the semantic level, annotated data is accessible via inline queries that can be used within articles for dynamic content generation. The graphical query interface is available for composing queries and for immediately previewing and formatting the results (Fig. 12.4). The query interface is directly accessible from the WYSIWYG editor for embedding the queries into articles.

234

M. Erdmann and D. Hansch

Fig. 12.3 Data editing in articles using semantic forms

Users can choose from a rich set of visualization methods for rendering query results in an article. They range from simple lists or tables to calendars, timeline charts, maps, bar or pie charts, or process diagrams (Fig. 12.5).

12.1.2.4

Organizing and Curating the Ontology

The knowledge architect is in charge of organizing and curating the ontology to ensure that it addresses the requirements of the knowledge contributors and that it is consistent with the data which is stored in the wiki articles. The ontology browser provides a complete overview of the wiki’s ontology to the knowledge architects. The ontology can be searched, filtered and changed in this tool, e.g. by adding and renaming categories or deleting instances (Fig. 12.6). The gardening bots of SMW+ are an extensible set of agents (bots) that detect anomalies in the ontology such as undefined entities, a mismatch between property type and property value, or empty categories. The knowledge architect regularly starts bots to verify the consistency of data and ontology and to apply corrections where necessary.

12

Applications of Semantic Wikis

235

Fig. 12.4 The query interface supports building queries

12.1.2.5

Reusing Knowledge

A basic wiki idea is to facilitate knowledge interchange and re-use between people, which also includes supporting as many relevant resource formats and origins as possible. This concerns the import of external data into the wiki on the one hand, as well as the usage of wiki-data in external applications on the other hand. Therefore, SMWþ allows calls to external SOAP or RESTful web services and integration of their results into wiki articles. This is useful to extend articles with external information, e.g. from a bug tracking system to compile dynamic project state and progress reports. An additional term import feature enables importing data and vocabularies into the wiki (existing terminologies, glossaries, emails, CSV files etc.) by creating wiki pages and automatically populating them. In the other direction, data in the wiki can be re-used in other applications via corresponding connectors. They allow querying data from the wiki within a spreadsheet in Microsoft Excel. It is also possible to exchange project and task information, including attributes, hierarchies and interdependencies, with Microsoft Project (Fig. 12.7). With the ontoprise product WikiTags, users of Microsoft Outlook, Word, and Excel can access, add and edit information and dynamically query results embedded in wiki articles without leaving their application.

236

M. Erdmann and D. Hansch

Fig. 12.5 Query results are visualized in articles

The most powerful feature in the knowledge re-use context is semantic data integration (Fig. 12.8). In conjunction with the TripleStoreConnector (containing OntoBroker), SMWþ is employed as the collaboration front-end in complex database environments. Existing databases (using RDBMSs like Oracle, IBM, Microsoft SQL Server or MySQL) are “lifted” to a semantic level, thus, made available in SMWþ. OntoBroker’s semantic data integration features (Angele and Gesmann 2007) provide a consolidated view on different data sources, which are available in the ontology browser and the query interface.

12.1.2.6

Administrating an SMW+ Installation

Several tools facilitate the maintenance of an SMWþ installation, e.g., tools for definition of the wiki’s security policy and for the installation and upgrade process. A typical basic administration step is the definition of access restrictions to different elements of a wiki for single users or user groups. Objects that can be

12

Applications of Semantic Wikis

237

Fig. 12.6 Inspect and edit the ontology in the ontology browser

protected in this manner are namespaces, categories, single wiki pages, but also semantic content (e.g. properties) and even specific actions within the wiki (e.g. editing or reading pages). The Access Control List extension implements these security features, allowing users to define private user or department workspaces, and to restrictively expose selected areas to partners and customers. Installation and upgrade tasks are facilitated with the Deployment Framework that is included in SMWþ. It supports the administrator in (de-)installing, updating and upgrading the wiki software without altering configuration files or manually applying patches. Extensions are downloaded from the central ontoprise repository and added while the tool considers all possible dependencies.

12.1.3 Business Applications SMWþ is a universal and domain independent tool which is applicable for a multitude of scenarios. In contrast to common enterprise applications, which are designed to address general business problems, SMWþ focuses on the specific and evolving needs of a work group and, thus, forms a situational application. Thanks to the ontology modeling and querying features, users can adapt SMWþ to serve their situational and unique requirements.

238

M. Erdmann and D. Hansch

Fig. 12.7 A connector synchronizes data between SMWþ and Microsoft Project Fig. 12.8 Technical architecture of SMWþ, TripleStoreConnector and OntoBroker

Therefore, possible application areas range from enterprise content management (ECM), to integrated collaborative environments (ICE) and business intelligence (BI).

12

Applications of Semantic Wikis

239

ECM comprises technologies to manage an organization’s unstructured information, e.g. via web content- and document management. SMWþ is a content management system and it covers typical customer needs like collaborative and distributed authoring, version control, markup language to create layout templates and management of technical metadata and media files. The semantic features of SMWþ are used to describe wiki articles by means of annotations that amongst other things allow the generation of new content. The benefits of the semantically augmented content are (1) increased efficiency of content production by aggregating content using queries and embedding dynamic lists into articles and (2) improved user experience by providing better search results based on data in articles. An Integrated Collaboration Environment (ICE) is defined as an environment in which virtual teams do their work. In the case of project management, typical requirements address the need of team spaces to collect and collaboratively author project documents, support project managers in monitoring and scheduling tasks and work packages and keeping the team informed about performance, costs and schedule. Customers of SMWþ are already using SMWþ as a light-weight, semantic project management system. In contrast to traditional project management systems, which require users to follow rigid workflows and metadata blueprints, SMWþ offers more flexibility to project teams. They flexibly adopt and extend the SMWþ project schema to better satisfy their situational needs. Recently the term Business Intelligence 2.0 has emerged. It involves the idea of having easy-to-use business intelligence systems that provide insights on enterprise data and allow users to collaborate, share and create reports via web-interfaces. The overall objective is to make critical BI information available and accessible not only to special CIOs or BI experts, but for everyone who relies on company relevant information. SMWþ is a BI 2.0 tool, since it integrates heterogeneous enterprise data sources into a unified view. In contrast to other BI 2.0 tools, SMWþ additionally gives users a flexible descriptive layer (i.e. arbitrary wiki pages) to organize reports, queries and external data.

12.1.3.1

Content Management: UNESCO OceanTeacher

UNESCO/IOC (http://ioc-unesco.org) employs SMWþ as technical basis of the “OceanTeacher Encyclopedia” (http://library.oceanteacher.org), a production system and public library of knowledge related to oceanographic data management. It includes text, images, objects (PDF and Word documents, software packages, audio and video files) and links to other web sites. Currently, 10 editors and 25þ authors are collaboratively generating articles for 300þ content consumers. UNESCO decided to re-launch OceanTeacher because the former content management system did not provide a sufficient quality of search hits. It was nearly impossible for content consumers to find materials on a particular topic for a particular qualification level. UNESCO has contracted ontoprise to define an ontology that covers the various topics and that allows users to match articles in these topics with their qualification level.

240

M. Erdmann and D. Hansch

The new OceanTeacher portal splits up into a public portal for retrieving, exploring and reading articles and a production portal that is accessible for UNESCO personnel only. The production portal has been configured to orchestrate the production workflow of the editors, contributors and consumers. Editors review and approve content created by the members of the contributor-group. They distribute tasks to these contributors, for example creating new articles or improving existing articles. Contributors are responsible for creating content. The separation of the user groups provides the opportunity to assign different user rights. Before publication in OceanTeacher, created content has to be approved by an editor. Every contributor has his own private section in the wiki, where not-yet approved articles are listed. After successful approval, the article will be published in OceanTeacher and is visible for other users. The target audience of the new OceanTeacher can be separated into three levels of expertise: beginners, intermediate and experts. While creating an article, contributors assign the corresponding target group to the article. The user can display the content, which relates to his personal state of knowledge and interests. The selection of target group, category and further metadata is done very conveniently with forms or in the advanced annotation mode (Fig. 12.9). Consumers are empowered to retrieve content precisely according to their needs. This was realized with the SMWþ query interface which allows composing and executing custom queries. These queries can be easily added with a few mouse clicks. After the re-launch of OceanTeacher consumers retrieve better search hits in less time and they can explore the library of articles much more easily with the tree view. The production workflow is better integrated and orchestrated. Finally, editors generate more appealing articles thanks to the WYSIWYG editor.

Fig. 12.9 Editors use the advanced annotation mode of SMW+ to enrich wiki contents with semantic annotations

12

Applications of Semantic Wikis

12.1.3.2

241

Project Management: Business Process Re-engineering at an Italian Bank

Business Process Reengineering (BPR) is defined as the analysis and (re-)design of workflows within an organization in order to improve their efficiency. The following example deals with a BPR project that was conducted with SMWþ by an Italian association of banks: the “Association of Cooperative Banks of Emilia Romagna”. The project aimed at consolidating the various work processes of the 8000 members of the association. This required conducting a survey of the current processes employed by each bank. The data was collected by employees of the bank and had to be evaluated afterwards in a business impact analysis. By these means an assessment was achieved of how tasks were described in theory, how they were actually handled in practice and what the most crucial processes were. Based on that, standard procedures were identified and implemented. The implementation of the project was split up into several phases. After setting up SMWþ, the employees started collecting facts and descriptive texts in SMWþ about the tasks they execute in their daily work. It was crucial that they entered particular data in forms to ensure that it is normalized (e.g. risk level, responsible persons, duration of execution etc.) to allow the subsequent statistical analysis. The collected data was imported into Microsoft Excel where the statistical clustering was done to get the groups of tasks, which share similar characteristics (e.g. the risk of failure). These groups allowed spotting the most critical operational processes that needed to be re-engineered. In a final step, the selected processes were standardized and then collaboratively consolidated by the bank employees (Fig. 12.10). SMWþ provided the reliable and agile knowledge base for every single phase of the depicted case. The project requires an easy to use and easy to procure tool enabling employees to safely enter data and text about their tasks. Furthermore, the dynamic generation of aggregation lists and overview tables of the collected data, as well as the data’s provision for statistical processing, was stipulated. SMWþ meets these requirements with some key features, e.g. • • • • •

semantic forms enable easy data entry, a flexible data model which can be created and extended with the OntologyBrowser fine-grained access control (especially crucial for the sensitive banking industries) advanced ad-hoc querying of the stored data SMWþ machine-interpretable data which can seamlessly be extracted and processed with external tools (e.g. MS Excel or MS Access) for advanced statistical analysis.

12.1.3.3

Semantic Data Integration

One of the main problems companies have to deal with regarding knowledge management is the integration of heterogeneous data sources. Considerable efforts are necessary to provide a unified view on distributed data. The following case depicts how a Fortune 100 pharma-company employed SMWþ as a self-service

242

M. Erdmann and D. Hansch

Fig. 12.10 Screenshot of a task which has been entered by an employee

portal for its R&D department, to integrate various data bases containing information about production lots, ingredients of individual products, results from tolerance tests, etc. The R&D department of the company was faced with the task of tracking all significant events and data that are relevant for Food and Drug Administration (FDA) submission reports, which are required for approving novel drug products. Since it was hard to assemble the scattered data from several sources, the compilation of reports was error-prone and took an inordinate amount of time. Consequently, the requirement was to achieve a consolidated view on the relevant data stores by linking them to a common domain ontology. Easy access methods would then allow the generation of suitable reports on the fly (Fig. 12.11). The case was resolved with an internal self-service portal where the R&D staff could not only generate reports via querying the integrated databases but also by using rules for inferring knowledge. The original Oracle databases were connected to an OntoBroker Server as integrating middleware. At the front end, researchers interacted with SMWþ and OntoStudio. The latter served as a collaborative environment for ontology engineering and curation while the former was a central integration and presentation facility for all of the activities. The application of SMWþ combined with the semantic middleware OntoBroker offers an integrated, common view on separated data silos. OntologyBrowser and semantic tree view facilitate browsing and navigating the product genealogy in the wiki. The compilation of reports in this way is remarkably faster through federated semantic queries. Moreover, researchers can collaborate on integrated data and

12

Applications of Semantic Wikis

243

Fig. 12.11 OntoStudio mapping view for mapping RDBMS schema onto the ontology

reports that were gathered in the wiki. Also, the quality and coverage of relevant information improves since the tracking and validation of products involves their entire lifecycle now and important events always automatically trigger alerts (e.g. when new test results are available or the ingredients of drugs have changed). All told, the solution reduces the turn-around time for FDA submissions by several orders of magnitude, from something that took a few weeks, to just a few minutes.

12.1.4 Conclusion and Outlook In Section 12.1 we have presented SMWþ, the semantic enterprise wiki of ontoprise, and demonstrated how flexibly it addresses enterprise-level requirements compared to traditional enterprise-level applications. The versatility of SMWþ opens a wide area of situational applications where SMWþ can be efficiently employed. In all cases the applications are built by the wiki users for the wiki users. Starting from a standard SMWþ installation they gradually extend and refine the wiki as they work with it. The applications are highly collaborative (e.g. project management); they are driven by the combination of text and data (e.g. content management) and they all include data modeling tasks. Finally, SMWþ demonstrates its unique strength when combining socially curated unstructured data (i.e. text) with semantically integrated data from external, legacy data sources, like RDBMSs. SMWþ is a novel tool for knowledge workers that is easily procured and deployed to “start small” and which over time serves more and more users and suits more and more requirements.

244

12.2

V. Pammer et al.

Bringing Complementary Models and People Together: A Semantic Wiki for Enterprise Process and Application Modelling

Viktoria Pammer, Marco Rospocher, Chiara Ghidini, Stefanie Lindstaedt, and Luciano Serafini

12.2.1 Introduction Enterprise modelling is the process of formally describing aspects of an enterprise, typically as process models, data models, resource models, competence profiles, etc. The availability of such enterprise models, expressed in computer-interpretable formal languages, is becoming an important factor for enterprises and organisations to make better and more flexible usage of the organisation’s knowledge capital and foster innovation. We describe here the design and applications of MoKi (the Modeling wiKi, http://moki.fbk.eu), and illustrate that complementary models can be created in the same modelling tool by people with complementary skills. MoKi is a semantic wiki for modelling enterprise processes and application domains, and intended to be used by knowledge engineers and domain experts, and everyone with skills in between. State of the art modelling tools provide good support towards the creation of formal, computer interpretable models, but they suffer from two critical limitations: Different tools and different people are needed to model various enterprise aspects, and throughout all modelling stages. • Different tools and modelling environments are provided for the specification of the different aspects of an enterprise. Most notably, the tools that are used to model business processes are usually separate and disconnected from the tools used to model the enterprise application model, which is more and more often encoded by means of ontology languages. This tool discontinuity produces two types of problems: Firstly, the modelling team needs to learn and interact with completely different tools. Especially in small environments like SMEs, where there may be scarce resources to allocate to modelling activities, this doublelearning may lead to human resource problems. Secondly, the technical integration of the different parts (i.e., business processes and enterprise application domain) is not directly supported by the different tools and can therefore become unnecessarily complex and time-consuming. • State of the art tools for ontology and process construction are often tailored to knowledge engineers, that is, to people who know how to create formal models. On the other hand, domain experts, that is, the people who know the domain to be modelled, often find such knowledge engineering tools scarcely usable. As a result the interaction between these different roles in the modelling team is regulated by a fairly rigid iterative waterfall paradigm in which domain experts produce or revise informal descriptions contained in textual documents

12

Applications of Semantic Wikis

245

Fig. 12.12 Collage of views on MoKi content

and these informal descriptions need to be manually interpreted and transposed in a formal specification by a knowledge engineer with the obvious problems of duplication of efforts, wrong or misleading interpretations, and so on. To overcome the limitations illustrated above, we have experimented with Semantic Web collaborative tools, and especially Semantic MediaWiki. The current version of MoKi, an extension to Semantic MediaWiki, is the result of these experiments. We have used MoKi in different development stages and customisations, in various application cases (see Sect. 12.2.3). MoKi addresses the above two limitations through (1) representing both tasks belonging to a business process and topics belonging to an enterprise application domain in a wiki based system, and (2) representing both formal and informal content, and allowing different visual representations of the same content. A collage of views (tree view of concepts, process editor, a single concept) on MoKi content is depicted in Fig. 12.12.

12.2.2 A Conceptual System Description of MoKi MoKi is an extension of Semantic MediaWiki, which itself is an extension of MediaWiki. Semantic MediaWiki adds labelled links and RDF interpretation of wiki content to MediaWiki, and MoKi adds OWL4 and BPMN5 interpretation

4 5

Web Ontology Language, http://www.w3.org/TR/owl2-overview Business Process Modelling Notation, http://www.bpmn.org

246

V. Pammer et al.

of wiki content, as well as some knowledge engineering support, to Semantic MediaWiki. The decision to implement MoKi on top of an existing wiki was taken for several reasons. Firstly, a wiki environment was chosen since the wiki principles of (1) giving access to content (both with read and write permissions) to all, and (2) making modifications of content as easy as possible for everybody, are well-aligned with the goal of MoKi to be a modelling environment not only for knowledge engineers. Secondly, most wiki environments support versioning and standard collaboration features like discussion threads or comments. Thirdly, most wikis are web-based, which enables geographically distributed modelling, and allows textual as well as multimedia content, i.e. everything which can be published on the web can be published in a wiki. Finally, most potential users of a system such as MoKi can be expected to know how a wiki looks and feels, and a large portion of these people also know how to actively contribute to wiki content. This is partly due to the large success of the online encyclopaedia Wikipedia, but as well to the arrival of wiki (and other semantic web) technology in the corporate world, as observed e.g. in Gissing and Tochtermann (2007) and Schachner and Tochtermann (2008). Extending traditional wikis, semantic wikis (Schaffert et al. 2008) already provide the basic infrastructure to deal with structured data in addition to traditional human-readable content-types like text or multimedia. Thus, they are technically well suited to accommodate the results from informal as well as formal modelling activities. In choosing a particular semantic wiki upon which to build MoKi, we decided for Semantic MediaWiki, because MediaWiki has a large community of developers and users, it is easily extensible through plugins and because it is generic insofar as it is not adapted to any specific application scenario.

12.2.2.1

The “One Page – One Element” Design Principle

The basic design principle of MoKi is that every model element corresponds to a wiki page. For application domain modelling, the relevant model elements are concepts, individuals and properties/relations, while for business processes the relevant model elements are processes.6 Each model element is internally given a formal meaning. For instance, a concept is given the meaning of a description logic concept, i.e. it is a unary predicate and can be interpreted as a set of entities for which the unary predicate holds. It is essential to be clear about this internal interpretation of model elements, since this forms the basis of technically dealing with imports from various knowledge representation formalisms and exports to various knowledge representation formalisms. A MediaWiki category is used to distinguish different kinds of model element. Table 12.1 shows a synopsis of the

6 For the sake of simplicity, in MoKi we decided to not explicitly distinguish between atomic and not atomic processes (i.e. composed of two or more sub-processes).

12

Applications of Semantic Wikis

247

Table 12.1 Category names in MoKi for designating different kinds of model elements in MoKi. “Type of Model” refers to the type of model in which such a model element is expected to occur Category Model element Interpretation Type of model “Domain model” Concept DL concept Domain ontology “MokiProperty” Property/Relation DL role Domain ontology “Individuals” Individual DL nominal Domain ontology “Process model” Process BPMN process Process/Task model

model elements available in MoKi, their formal interpretation as well as in which kind of model the corresponding model element is expected to be used. For every kind of model element supported by MoKi, a specific template is provided. Figure 12.13 shows an excerpt of an already filled-out concept description. The implementation of templates is based on the Semantic Forms extension to Semantic MediaWiki that allows users to define forms for editing pages and templates to store semantic data. From a user perspective, a template is displayed as a list of fields which have to be filled out in order to describe the model element. Fields can differ between model elements. Conceptually, a template asks the user for information which is typically needed for a specific kind of model element. Example. When describing a domain concept, it is typical to ask “What is a superconcept?”, i.e. what are more general notions than the currently described concept, in which categories does it fall? Obviously, the users are not necessarily required to fill all the fields of a page when describing a specific model element. Additionally, some of the templates support the possibility for users to add custom defined fields. Example. A user may want to describe the concept “Project”, and then express that a project is typically managed by a person. In this case, the user can add a new field to the concept “Project” which is called “managed-by” and fill it with the concept “Person”. The use of templates allows for an easy customization of MoKi to hold additional kinds of models other than domain ontologies and business processes. Although such a customization can not yet be done solely at the user interface – some programming in PHP is required in order to define the formal meaning of the fields in a new template and to add import and export support for the new model elements – it requires some minimal software development effort.

12.2.2.2

Functionalities

In addition to the features offered by MediaWiki and Semantic MediaWiki, MoKi provides functionalities for importing/exporting models, navigating, editing, and validating models. In this section we briefly illustrate these functionalities. A more extensive description can be found at the MoKi web site and in Ghidini et al. (2009). The first group of functionalities concern the import/export of models. The application domain model can be exported into OWL 2, RDF/XML Rendering, and

248

V. Pammer et al.

Fig. 12.13 Excerpt of a filled-out concept template in MoKi, shown in the figure for a concept called “Workshop”. The fields in the Annotation, Hierarchical structure and Notes boxes are available for all domain concepts. The fields in the Properties box are added by the ontology engineer specifically for each domain concept, as e.g. “hasParticipant” and “isOrganizedBy” for the concept “Workshop”

12

Applications of Semantic Wikis

249

the business process model can be exported into BPMN, according to the Oryx eRDF (embedded RDF) serialization. Import of application domain models is possible from OWL 2 files. In addition MoKi also supports importing knowledge from less structured sources. Hierarchies of concepts can be imported by writing down the hierarchy as a simple ASCII list of terms, where indentation indicates the hierarchy. Knowledge can be imported from text documents by means of a term extraction functionality. Extracted terms can be added with one click as (candidate) concepts into MoKi domain ontology. This functionality uses at the backend the KnowMiner framework, a Javabased framework for knowledge discovery (Granitzer 2006; Klieber et al. 2009). The second group of functionalities concern the navigation of models. In any information or knowledge management system, navigation through content is vital to its success: the best content is useless if it cannot be easily accessed. MoKi content can be accessed through standard MediaWiki functionalities like search, or through typing in the URL of a single page in the address bar of the browser. Apart from this, there are the possibilities to get lists of model elements in a tabular style (where each element is shown alongside some relevant information characterizing it), and in graphical visualizations. For the ontology part, the graphical visualization concerns a tree-view rendering of the specialisation (Is-A) and mereological (PartOf) hierarchies, and a tree-view rendering of the individuals concept membership role. Hierarchies are also editable by drag-and-drop features. For the process part, a graphical visualisation of the process workflow and of the different subprocesses it comprises is available in the process element page. The third group of functionalities concern the editing of models. Editing activities relate to single model elements and concern the creation of model elements, their repeated editing (among this renaming the model element, or even changing its type), and the deletion of model elements. Depending on the type of element, the corresponding template is loaded when a model element is created or edited. A fourth important group of functionalities concern the evaluation of models (described in detail by Pammer (2010), pp. 93–121). Whatever purpose models are created for, they need to be evaluated in order to ensure that they will serve their intended use. The current version of MoKi supports ontology evaluation through: (1) a models checklist, (2) a quality indicator, (3) the ontology questionnaire and (4) through displaying assertional effects. The models checklist is a list of characteristics that typically point to oversights and modelling guidelines, and automatically retrieves elements that fit the characteristics. Example. One point on the checklist is “Orphaned concepts”, i.e. concepts that have no super- or subconcepts, have no parts and are not part of anything. These are often concepts left-over from brainstorming or another earlier modelling iteration. The quality indicator is displayed on the page of all elements and visualises the completeness and sharedness of the corresponding element as a bar that grows from “short and red” to “long and green”. Both completeness and sharedness are heuristic measures, where the first captures how much information (verbal, structural) about the element is available while the second captures how many people have contributed to the description of the element. The ontology questionnaire displays

250

V. Pammer et al.

inferred knowledge, i.e. statements that can be derived from the models contained within MoKi, and provides explanations for them, as well as the possibility to remove them. In case explicitly made statements are deleted in order to remove an undesired inference, the ontology questionnaire also displays side-effects, i.e. all inferences that will be lost alongside. Assertional effects (Pammer et al. 2009) are displayed on concept and property pages directly after an ontology edit that causes one or more assertional effects. It is called questionnaire in order to point out that domain experts should go through inferred statements like going through a questionnaire and asking the question “Is this statement correct?”.

12.2.3 Application and Experiences with MoKi MoKi has been applied in several scenarios, in varying stages of development and sometimes with small customisations.

12.2.3.1

Model Tasks and Topics for Work-Integrated Learning

Two early versions of MoKi have been successfully applied (APOSDLE 2009, pp. 21–25, 32–47) to develop enterprise models in six different domains: Information and Consulting on Industrial Property Rights (94 domain concepts and 2 domain roles; 13 processes), Electromagnetism Simulation (115 domain concepts and 21 domain roles; 13 processes), Innovation and Knowledge Management (146 domain concepts and 5 domain roles; 31 processes), Requirements Engineering (the RESCUE methodology) (78 domain concepts and 2 domain roles; 77 processes), Statistical Data Analysis (69 domain concepts and 2 domain roles; 10 processes) and Information Technology Infrastructure Library (100 domain concepts and 2 domain roles; no processes). The enterprise models were created for the purpose of initialising and serving as the knowledge backend of a system for workintegrated learning ((Lindstaedt et al. 2007), www.aposdle.org). The modelling activities involved people with different modelling skills and levels of expertise of the application domains, and located in different places all over Europe. The experiences of using the first version of MoKi, essentially Semantic MediaWiki without much additional convenience functionality for modelling, are described in Christl et al. (2008). These experiences provided the motivation for adding convenience, i.e. modelling support, functionality to Semantic MediaWiki in order to support enterprise modelling for processes and application domains. A qualitative evaluation on the entire modelling process including the usage of early versions of MoKi applied in APOSDLE is documented in APOSDLE (2009). The evaluation of the second version of MoKi, much the same as the current open-source version in functionality if not in design and robustness, took the form of structured interviews. The interviews were composed both of open and closed questions. Interview partners were all involved domain experts, on-site knowledge

12

Applications of Semantic Wikis

251

engineers working at the application partners’ and external knowledge engineers providing additional modelling skills where necessary. Regarding MoKi, questions about its usability, the support for collaboration, the usefulness of its functionalities, the homogeneity of the modelling environment for modelling the different aspects (domain model and processes), etc., were asked. Note that before using MoKi, the users already tried modelling with Semantic MediaWiki for informal, integrated models (domain and business process) and Prote´ge´ and a YAWL editor for the formal models. According to the results of the questionnaire, the users highly appreciated the form-based interface of MoKi, and the fact that they were able to participate in the creation of the models without having to know any particular syntax or deep knowledge engineering skills. Thus, MoKi was perceived as an adequate tool to actively involve domain experts in the modelling process. From the questionnaire it further emerged that also people with some knowledge engineering skills found MoKi as comfortable to use as other state-of-the-art modelling tools. The answers show that MoKi helped the users in structuring and formalizing their knowledge in a simple, intuitive and efficient manner. Particularly appreciated have been the functionalities, in particular the graphical ones, which allow to navigate through the content defined in the models. Finally, the users have found MoKi, in its characteristic as web-based modelling environment, quite useful to produce a single model with a geographically distributed modelling team.

12.2.3.2

Collaboratively Build an Ontology for Annotating Content

The current version of MoKi has been used by a team of knowledge engineers and domain experts to collaboratively build an Organic Agriculture and Agroecology Ontology (61 domain concepts, 30 domain roles, and 222 individuals) within the FP7 EU-project Organic.Edunet (http://www.organic-edunet.eu/). This experience was perceived as positive enough to use MoKi as the central modelling tool in the follow-up EU project, Organic.Lingua.

12.2.3.3

Maintain a Glossary in a Project

The current version of MoKi is being used within the FP7 MIRROR project (www.mirror-project.eu/) to develop and maintain a common glossary.

12.2.3.4

Model Clinical Protocols in Asbru

Although MoKi as presented here is tailored to the development of ontologies and business processes, the applicability of MoKi goes beyond typical enterprise modelling. A preliminary and customized version of MoKi that supports the modelling of clinical protocols in the ASBRU modelling language is described

252

V. Pammer et al.

in Eccher et al. (2008). This version of MoKi, called CliP-MoKi, provides support for modelling the key elements of an Asbru model (e.g. plans, parameters) as wiki pages, and for exploring the models created according to the mechanisms for structuring knowledge provided by the language (e.g. the plan/plan children decomposition).

12.2.4 Discussion MoKi supports a variety of knowledge engineering activities, such as knowledge acquisition, informal modelling, formal modelling, and evaluation of models at various stages. Knowledge acquisition is supported through the term extraction functionality. The term extraction functionality is state-of-the-art, which unfortunately means that it supports only a limited number of languages (English and German currently) and that the quality of results depends a lot on the corpus it is given. Informal modelling is supported via the possibility to import simple hierarchies, via the prominently placed possibility to verbally describe and document (“Description”, “Synonym(s)”) all kinds of model elements, as well as via the possibility to richly document (“Free notes”) all kinds of model elements in all formats which can be held in a webpage. Evaluation of informal aspects of the models contained in MoKi is supported, in that for instance elements with no verbal description are explicitly pointed out to MoKi users (models checklist) and by giving direct feedback on completeness and sharedness on element pages (quality indicator). Formal modelling is supported from a user perspective by providing form fields with auto-fill functionality to ontology engineers. Fields are given a formal meaning, which is the basis of technically supporting formal modelling. Evaluation of the formal models is supported through listing and explaining inferences (ontology questionnaire) and through displaying the effects of editing formal axioms on data (assertional effects). However, on the formal modelling side, MoKi does not (yet) support the full expressivity of OWL 2. Most importantly, it does not yet support complex concepts. Additionally, MoKi versions that support both domain and process modelling, and a MoKi version that supports modelling clinical protocols, exist. Thus, MoKi does improve on the first limitation of many existing modelling tools and decreases the gap in tool support between tools for different enterprise aspects, and for different knowledge engineering activities. Most requirements for collaborative knowledge construction tools, discussed for instance in Noy et al. (2008) and in Tudorache et al. (2008), are easily met by MoKi, merely by its being implemented on top of MediaWiki. The requirements on collaboration features satisfied by MoKi are distributed access to a shared ontology, version control, user identity management and tracking the provenance of information and discussion on model elements. Fine-grained access control is not possible in MoKi, and collaborative protocols that involve rating or voting are not supported in MoKi either. Coherence is ensured mostly through keeping the informal and formal model element descriptions in one place, i.e. in one wiki page. Inconsistencies between the natural language text or rich content on the one hand

12

Applications of Semantic Wikis

253

and the formal descriptions on the other hand are not detected. Indeed, this would exceed the state-of-the-art in natural language understanding, and even more so in multimedia understanding. However, coherence is supported in another slightly roundabout way, namely through the “watch” functionality of MediaWiki. Through this functionality, users can be notified if changes occur at a wiki page, which in MoKi means changes concerning a model element. Like this, both domain experts and ontology engineers can easily detect changes to parts of the ontology in which they hold an interest. Concerning the second limitation of most existing modelling tools, namely that users with different knowledge engineering skills (knowledge engineers, domain experts) are often not able to work within the same modelling environment, MoKi already now is able to hold rich, informal content as any MediaWiki can, as well as formal content that can be exported into formal domain and business process modelling languages (OWL 2 and BPMN respectively).

References Angele J, Gesmann M (2007) The information integrator: using semantic technology to provide a single view to distributed data. In: Kemper A et al. (eds) Datenbanksysteme in business, technologie und web (BTW). 12. Fachtagung des GI-Fachbereichs “Datenbanken und Informationssysteme” (DBIS). GI-Edition-Lecture notes in informatics (LNI), p 103 http:// www.btw2007.de/paper/p486.pdf Christl C, Ghidini C, Guss J, Pammer V, Rospocher M, Lindstaedt S, Scheir P, Serafini L (2008) Deploying semantic web technologies for work integrated learning in industry. A comparison: SME vs large sized company. In: Proceedings of the 7th international semantic web conference (ISWC 2008), In use track, vol 5318, Springer, pp 709–722, 2008 Eccher C, Ferro A, Seyfang A, Rospocher M, Miksch S (2008) Modeling clinical protocols using semantic MediaWiki: the case of the oncocure project. In: ECAI workshop on knowledge management for healthcare processes (K4HelP), 2008 Ghidini C, Kump B, Lindstaedt S, Mabhub N, Pammer V, Rospocher M, Serafini L (2009) Moki: the enterprise modelling wiki. In: The 6th annual european semantic web conference (ESWC2009), Springer, pp 831–835, 2009, Demo Gissing B, Tochtermann K (2007) Corporate Web 2.0 Bankd I: web 2.0 und unternehmen – wie passt das zusammen? Shaker Verlag, Aachen, Germany Granitzer M (2006) Konzeption und entwicklung eines generischen wissenserschliessungsframeworks. PhD thesis, Graz University of Technology, 2006 ¨ ttl G, Granitzer M (2009) Knolwedge discovery using Klieber W, Sabol V, Muhr M, Kern R, O the knowminer framework. In: IADIS international conference information systems, pp 307–314, 2009 Kr€otzsch M, Vrandecic D, V€ olkel M, Haller H, Studer R (2007) Semantic wikipedia. In: WWW ’06: proceedings of the 15th international conference on World Wide Web. ACM, New York (2006), pp 585–594. http://korrekt.org/papers/KroetzschVrandecicVoelkelHaller_SemanticMediaWiki_ 2007.pdf Lindstaedt S, Ley T, Mayer H (2007) Aposdle – new ways to work, learn and collaborate. In: Proccedings of the 4th conference on professional knowledge management WM2007, ITO-Verlag, Berlin, Potsdam, Germany, pp 227–234, March 28–30 2007 APOSDLE Deliverable 1.6. Integrated modelling methodology version 2, 2009 Noy NF, Chugh Abhita, Harith Alani (2008) The CKC challenge: exploring tools for collaborative knowledge construction. IEEE Intell Syst 230(1):64–68, January-February 2008

254

V. Pammer et al.

Pammer V (2010) Automatic support for ontology evaluation – review of entailed statements and assertional effects for OWL ontologies. PhD thesis, Graz University of Technology, March 2010 Pammer V, Serafini L, Lindstaedt S (2009) Highlighting assertional effects of ontology editing activities in OWL. In: d’Acquin M, Antoniou G (eds) Proceedings of the 3rd international workshop on ontology dynamics, (IWOD 2009), collocated with the 8th international semantic web conference (ISWC2009), CEUR Workshop Proceedings, vol 519, Washington D.C, USA, October 26 2009 Pfisterer F, Jameson, A, Barbu, C (2008) User-centered design and evaluation of interface enhancements to the semantic media wiki. In: The proceedings of the workshop on semantic web user interaction at CHI 2008, Florence, Italy. http://swui.webscience.org/SWUI2008CHI/ Pfisterer.pdf Schachner W, Tochtermann K (2008) Corporate web 2.0 band II: web 2.0 und unternehmen – das passt zusammen! Shaker Verlag, Aachen, Germany Schaffert S, Bry F, Baumeister J, Kiesel M (2008) Semantic wikis. IEEE Softw 250(4):8–11 Tudorache T, Noy N, Tu S, Musen MA (2008) Supporting collaborative ontology development in Prote´ge´. In: 7th international semantic web conference, Springer, Karlsruhe, Germany, 2008

13

The NEPOMUK Semantic Desktop Ansgar Bernardi, Gunnar Aastrand Grimnes, Tudor Groza, and Simon Scerri

13.1

A Tool for Personal Knowledge Work

The crucial role of knowledge work in modern societies is widely recognised. Characterised by the collecting, structuring, and interconnecting of information and by the articulation of new insights, ideas, and results, knowledge work is understood as a comprehensive information processing activity which ultimately leads to decision making according to the goals and processes of the particular work context. Usually, such knowledge work ultimately boils down to a personal activity: the individual processes, navigates and enhances a rich information space, communicates and shares with others, makes sense out of available sources, and accounts for decisions taken and actions performed. Supporting individual, personal knowledge work is thus a promising approach for effective work support. Such support must take into account three core dimensions of personal knowledge work: • Information in the personal realm is typically available in various formats across different applications on a personal computer – think e.g. about Web browsers, databases, address managers, mailing tools, file systems, and documents of all kinds. Retrieving information in this complex collection can be cumbersome.

A. Bernardi (*) • G.A. Grimnes DFKI GmbH, Knowledge Management Department, Trippstadter Strasse 122, 67663 Kaiserslautern, Germany e-mail: [email protected]; [email protected] T. Groza School of ITEE, The University of Queensland, St. Lucia 4072, QLD, Australia e-mail: [email protected] S. Scerri DERI, National University of Ireland, Galway, IDA Business Park, Lower Dangan, Galway, Ireland e-mail: [email protected] P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5_13, # Springer-Verlag Berlin Heidelberg 2011

255

256

A. Bernardi et al.

• Human insight and knowledge create relations and dependencies between information items. Facilitating the documentation of such relations is a good way to make the knowledge worker’s thoughts explicit. • Typically, individual knowledge work is not performed in isolation. On the contrary, creativity and decision-making very often arise out of a vivid exchange with peers and contributors. To cope with such challenges, the NEPOMUK project1 has developed and implemented a vision of a new support tool for knowledge workers: the Social Semantic Desktop. This work environment (the desktop) allows the representation of knowledge and relations in computer-processable ways by explicit semantic annotation and the sharing of such information with others in a kind of social exchange. The central element of the Semantic Desktop is the generation and maintenance of a Personal Information Model (PIMO). This PIMO makes a knowledge worker’s concepts and relations between information items explicit and allows for annotating arbitrary information items in a formal and consistent way, thus representing the personal interpretations and assessments of the information at hand. Such explicit and formal annotation is then the basis for automated services to support the user. For example, in Fig. 13.1, the knowledge worker – Claudia – is faced with a multitude of information trapped within different data silos, such as, files, e-mails, tools etc. PIMO leverages a semantic representation of this data and models explicitly Claudia’s knowledge about the CID project, including relations to relevant data, as well as relations among the different data silos. The realization of the Social Semantic Desktop enables a better retrieval of relevant information across different applications and information sources within the personal (computer) desktop. It makes individual interpretation, perspectives, and interconnections explicit and sharable, and allows for suitable automatic activities, like classification of documents (via text/content analysis), grouping and browsing support, or reminder services (for tasks, deadlines etc.). To materialise the Social Semantic Desktop in a way which promises easy and wide-spread uptake, NEPOMUK has identified core aspects which must rely on established standards as far as possible: • Explicit concepts and relations shall represent the user’s thoughts in the PIMO, and available information is interpreted and structured accordingly. Thus the semantics of the information is available in formal structures, and computer services can rely on that. • This should be realized based on standard data formats which are independent of proprietary applications and implementation details. We find such data formats in the domain of the Semantic Web

1 NEPOMUK was performed 2006–2008 by 16 partners with funding by the FP6 program of the European Union. Further details and results are available at http://nepomuk.semanticdesktop.org

13

The NEPOMUK Semantic Desktop

257

the CID project Topic

Project

Document

Task Management CID CID slides Claudia Dirk

Karlsruhe Where

Who

files

emails

contacts

Documents

Inbox

Claudia Stern

Papers

Todo

Dirk Hagemann

Projects

SAP

Klaus Nord

CID Research

CID proj Karlsruhe

Fig. 13.1 A personal information model represents the user’s interpretation

• All models and annotations must rely on a widely-accepted conceptual basis in order to make shared understanding and collaboration possible. To this end NEPOMUK defines a number of ontologies to be used. • The implementation realizes a Framework architecture with open standard APIs, so developers can easily add their own additional services. • The ultimate goal is to enable the maintenance and sharing of personal information models – because knowledge workers are not alone!

13.1.1 An Example Scenario We outline the usage of a NEPOMUK Semantic Desktop by following a typical knowledge worker in some of her daily activities. Within the NEPOMUK project, the description of personas and associated scenarios (Gudjonsdottir 2010) proved very useful to clarify and illustrate the use of the tools and their benefits. The personas and scenarios were developed after interviews with and observation of real people from NEPOMUK use-case partners (see Sect. 13.6.2). There scenarios and personas served to motivate the developers to think about end-users other than

258

A. Bernardi et al.

themselves, as well as giving a high-level, but concrete overview of the kind of things the Semantic Desktop should be able to help the user with. We present a short glimpse at the activities of one persona, Mrs. Claudia Stern, and her Semantic Desktop: Claudia Stern originates from the town M€ unchen in Germany and lives now in Karlsruhe. She has a diploma in information technology and is a project manager at SAP Research. Currently, Claudia is working on a big EU project called CID. She utilizes various tools to control and follow up on the activities in the project. She books meetings with the project members through her calendar. In meetings, she always uses her laptop to access relevant information and presentations and to write minutes. She often needs to access her own and others’ calendar and the lists of tasks for the project members. Through these tools she has a clear picture of what needs to be done in the project. On the 27th of February, 2008, Claudia is having a meeting with Klaus, a colleague at SAP Research, and they are planning a meeting in the project called CID they are going to attend in Belfast. The meeting is organised by Marco Andriotti. There are many things that need to be done before they leave for Belfast in a few weeks. Claudia goes to her office and adds the meeting to her calendar; furthermore she creates a task called “Belfast meeting” in her personal task manager. From the work-trip template, a set of relevant sub-tasks are created, including e.g. request travel permission and book travel/accomodation. Besides the practical travel issues the task list also includes some items connected to the work that needs to be done in the meeting and Claudia adds some specific tasks to the list, fleshing out the automatically generated sub-tasks. When Claudia has got permission to travel, she proceeds to book train, flight and hotel, the system knows her preferences and only recommends fitting options. The travel information and electronic documents that result from her successful booking activities are added to her “Belfast meeting package” which includes everything related to the meeting, like work and travel documentation. The package is also accessible online. When the trip gets closer the system checks the weather so that Claudia can pack the right things. The system adds recommendations of restaurants and shops according to her profile. A travel timeline is created automatically, where she sees all the relevant appointments and dates she needs to observe: from leaving the office in order to make it to the train in Karlsruhe, to the tram when she returns home from the trip. Afterwards she gives her colleagues access to her timeline. As she is preparing for the meeting, Claudia can look up the details of colleages she met last time she went to a meeting in Belfast, including notes about their interests as well as about the restaurants were they had dinner. When Claudia comes back from her trip she needs to make a travel report in order to claim her expenses. This is automatically created according to the travel timeline she created before she left. Claudia sends this report, together with the collected receipts (still on paper!), to SAP’s HR department and is promptly refunded for her expenses.

13

The NEPOMUK Semantic Desktop

259

This scenario illustrates the support a NEPOMUK Semantic Desktop can offer to the knowledge worker: • Information is connected, combined, and accessed across different applications and tools. • A new event, insight, or activity results in descriptors or concepts created by the user (“Belfast Meeting Package,” “Belfast Meeting”). However, as the Semantic Desktop supports to relate such individual descriptions to pre-given, formal concepts (“work-trip”), the system can offer various automatic support. • Some relations and interconnections (e.g. time dependencies and timeline) are observed automatically and can be used e.g. for report generating. • Sharing of selected information items and structures support the communication and exchange among collaborating colleagues. In summary, Claudia benefits from an improved way to structure her personal information space, to access information relevant to the current work context, to express her own ideas and insights about key concepts and their relations, from the exchange with her colleagues, and from various automatic helper services within her personal computer.

13.2

Standards & NEPOMUK Technology

The Social Semantic Desktop (SSD) represents a platform that serves as a foundation for building different social and semantic applications. Such applications share a series of common functional aspects that the platform needs to capture and then expose. At the desktop level, applications need to be able to create and manage resources and information about resources (in the form of annotations or relations). This information needs to be stored and then efficiently retrieved when required. In order to enable the transfer of information, the applications need to interact with the Social Semantic Desktop. As a result, the platform exposes several services representing access points to low-level functionalities. These functionalities range from resource or notification management, to desktop sharing or off-line access. However, three of them are essential in providing semantically-enhanced resources. Firstly, the SSD supports different data analysis mechanisms (e.g., inference) to enrich the semantics of low-level desktop information elements or resources. For example, a keyword extraction mechanism enables automatic tagging of resources or the summarisation of long textual information elements. Secondly, context is crucial in delivering the right information for a given resource (Schwarz 2010). Hence, the SSD supports not only user profiling, but also the detection of the current context, in addition to ways of attaching such context information to resources. Finally, making direct use of the results of the previous two, is searching. Thanks to the rich semantic network of desktop resources, the user will profit from new ways of accessing the available information space. Traditional keyword search and

260

A. Bernardi et al.

hierarchy browsing is complemented by associative browsing in the concept space, grouping along relevant relations, and multiple conceptual views on search results. Search tools will offer support based on user’s profile or context, and will act proactively by detecting and predicting a particular user’s search patterns. Going beyond the desktop level, the SSD provides different means of Social Interaction, among which the most important one is resource sharing. This enables innovative and more efficient collaboration means among users by providing context and semantics-based sharing facilities, in addition to the creation of ad-hoc shared information spaces centred around particular resources or users. Such functionalities obviously rely on more low-level ones like access control management or user group management. In order to support the above-listed set of aspects, in the context of the NEPOMUK project, the Social Semantic Desktop relies on two standards: • A suite of ontologies, that provide a formal way of encoding the semantics of the resources participating in or describing these aspects, and • A standard architecture, that enables a standard specification of the underlying components, independently of the implementation platform. In the following sections, we describe both the ontologies and the architecture, as well as detailing two reference implementations.

13.3

Ontologies

In this section we provide an overview of the ontologies engineered for the Social Semantic Desktop, the most important ontologies are the NEPOMUK Representational Language (NRL); the Information Element set of ontologies (NIE) – which define common information elements and legacy data that is to be found on the desktop in its various forms; and finally the Personal Information Model Ontology (PIMO) – which combines the knowledge in the other ontologies to express the individual’s entire unified personal information model. In order to correctly manage the creation and integration of the numerous required ontologies, we pursued a serial approach, designing first the higher (general, abstract) layers of the ontology stack, and then the more detailed ontologies. This layered approach is illustrated in the Semantic Desktop Ontologies Stack – a top-down conceptual representation of the required ontologies and their interdependencies, which also served as the road-map for their gradual design (Fig. 13.2). In addition to the ontologies detailed below, the diagram also shows the NEPOMUK Annotation Ontology (NAO) for representing simple tagging, and the NEPOMUK Graph-Metadata Ontology for annotating named graphs. We differentiated between the three ontology layers following the classifications used in (van Heijst et al. 1995) and (Semy et al. 2004), in order of decreasing generality, abstraction and stability: The Representational Level provides stable and generic language elements, upper level ontologies contain domain-independent and widely

13

The NEPOMUK Semantic Desktop

261

NEPOMUK Ontologies Pyramid

Representational Layer RDF RDFS NRL Upper-Level Layer

NAO

NGM

NIE

PIMO Foundational

Lower-Level Layer Mid-level

Personal-Level

All Concepts a User of the Semantic Desktop deals with All Concepts an Application Programmer of the Semantic Desktop deals with

Fig. 13.2 Semantic desktop ontologies stack

agreed-upon concepts, whereas lower-level ontologies contain evolving personal or group-level views.

13.3.1 Representational Level The ontology on the representational level defines the concepts and relations available for expressing the domain models building upon it. For example, RDFS gives you the ability to express a subclass hierarchy of concepts, while OWL allows richer class expressions using unions, intersections, or complements of exiting concepts. OWL was deemed too complex for defining the ontologies needed on the Semantic Desktop, especially as they had to be understandable for software engineers with little Semantic Web background. However, plain RDF Schema lacks some basic constructs like cardinality constraints. Another issue is that both RDFS and OWL are intended for the open-world assumption of the Semantic Web, whereas on the desktop making a closed-world assumption is more natural. We therefore created a novel representational language – the NEPOMUK Representational Language (NRL) (Sintek et al. 2007a), as an extension to the Resource

262

A. Bernardi et al.

Description Framework (RDF) and the associated RDF Schema (RDFS), that imposes no specific semantics on data, and supports Named Graphs (Carroll et al. 2005). NRL addresses several limitations of current Semantic Web languages, especially with respect to modularisation and customisation. Aside from fulfilling the basic requirements for a representational language for the SSD, NRL is also of relevance to the general Semantic Web, in particular because of its support for named graphs, which although being a widely-popular notion, had not been supported by any standard representational language so far.2 Named graphs allow us to handle identifiable, modularised sets of data. Through this intermediate layer, handling and exchanging RDF data, as well as keeping track of provenance information is much more manageable. All data handling on the semantic desktop including storage, retrieval and exchange, is carried out through the use of such named-graphs. Alongside provenance data, it is also possible to attach other useful information to named graphs. In particular, for better data management we felt the need for named graphs to be able to be distinguished by their roles e. g. an ontology, instance-base, knowledge-base, etc. Although the naming of the NRL formalism might suggest otherwise, it is a completely domain-independent representational ontology (or language), and can be applied to other platforms and scenarios. The interested reader might want to refer to the complete NRL guide and specifications (Sintek et al. 2007b) to learn more about NRL.

13.3.2 Upper-Level Ontologies This layer includes high-level, domain-independent ontologies. They provide a framework by which disparate systems may utilise a common knowledge base and from which more domain-specific ontologies may be derived. They are characterised by their representation of common sense concepts, i.e., those that are basic for human understanding of the world. Concepts expressed in upper-level ontologies are intended to be basic and universal to ensure generality and expressivity for a wide area of domains. The NEPOMUK ontologies shall provide the user with the concepts which allow to capture and represent the users’ mental models, their resources and their activities in a set of well-organised knowledge models, as such formal models are the prerequisite for enabling semantic technologies on the desktop. We set out to develop a number of upper-level ontologies that fulfil this requirement. The modularisation of these ontologies in itself was a challenge, keeping the layered approach described earlier in mind. Even though they are all upper-level ontologies,

2 However, there are non-standard representational languages with support for named graphs, such as Notation3 or TriG.

13

The NEPOMUK Semantic Desktop

263

dependency relationships exist between them. The design of the upper-level ontologies sought to: • Represent common desktop entities (objects, people, etc.) • Represent trivial relationships between these entities, as perceived by the desktop user • Represent instances of a user’s mental model, consisting of entities and their relationships as described above, on their desktop Whereas the representation of high-level concepts like ‘user’, ‘contact’, ‘desktop’, ‘file’ is fairly straightforward, we also need to leverage existing information sources in order to make them accessible to semantic applications on the SSD. This information is contained within various structures maintained by the operating system and a multitude of existing legacy applications. These structures include specific kinds of entities like messages, documents, pictures, calendar entries and contacts in address books. In (Sauermann et al. 2006) van Elst coins the term native structures to describe them, and native resources to describe the pieces of information they contain. One of the core challenges was to integrate existing legacy Desktop data into the Social Semantic Desktop, since in order to operate, it requires meta-data represented in RDF/NRL.

13.3.2.1

NEPOMUK Information Element Ontologies (NIE)

A user’s desktop contains a multitude of applications serving numerous purposes, e.g. word processing, calendar management, mail user agents, etc. They allow users to create, store and process information in various ways in order to accomplish a wide array of tasks. One of the major goals of the semantic desktop is to allow the user to organise this information (the native resources) and enrich them with annotations, connect related entities and map them to concepts in the PIMO. In order to implement this kind of functionality native resources need to be expressed in a way that allows for this kind of post-processing, i.e., as RDF graphs. This is the motivation for the NIE set of ontologies, for which we now provide a brief overview. Whereas the goal of PIMO, discussed below, is to be as close to the human cognitive processes as possible, in order to represent objects as they are seen by the user, NIE provides vocabulary intended to minimise information loss in the elicitation and representation of data from desktop data sources into RDF graphs. However, this data lies outside the control of the semantic desktop system. It has a dynamic nature, whereby new items appear, are modified and disappear in the course of work. NIE is concerned with the synchronisation between the native data sources and a data repository that doesn’t contain abstract concepts, and is designed to describe concepts like “File”, “Email”, or “Contact”. PIMO can then be used to add value to this data by expressing tags, people, places, projects and anything else the user might be interested in. NIE is composed of seven different, but unified, vocabularies. The NIE-core vocabulary defines the most generic concepts, while six specialised ontologies

264

A. Bernardi et al.

extend NIE towards specific domains: NEPOMUK Contact Ontology (NCO) for contact information, NEPOMUK Message Ontology (NMO) for messaging information, Nepomuk File Ontology (NFO) for basic file meta-data and expressing file system structures in RDF, NEXIF for image meta-data, NID3 for audio meta-data and NCAL for calendaring information. NIE is a unified ontology framework as there is no overlap between the vocabularies. Classes in all vocabularies are organised in an explicit inheritance hierarchy when appropriate. The interested reader is advised to consult the official NIE specifications (Mylka et al. 2007) for more detailed descriptions about the NIE unified ontology framework.

13.3.2.2

Personal Information Model Ontology (PIMO)

Whereas the previous ontologies focused on specific aspects or domains of the SSD, the PIMO provides representation for a unified information model which reflects the users’ Personal Information Model as perceived by them. In other words, it is a mental conceptualisation of how users organise the domain of their own work: the projects they work on, the people they know, the products they use, the cities they travel to, the organisations that employ them, etc. The goal is for the knowledge structure to be independent from both the way the user accesses the data, as well as the source, format, and author of the data. What this means is that the PIMO is concerned with real-world things, rather than the technological details of how those things are implemented in the software. While each user has their own PIMO and can modify and personalise it according to their own personal needs (i.e., add classes, properties and instances), the standard PIMO (PIMO-Upper) already contains around 40 classes that represent what we consider to be the lowest common denominator of typical personal information models.3 PIMO defines a top-level class pimo:Thing, from which most other classes in PIMO-Upper (as well as all user-defined classes) are derived, with examples such as pimo:Person, pimo:City or pimo:PhysicalObject (some classes in PIMO-Upper are not pimo:Things, such as pimo:Association or pimo: TimeConcept). In order to prevent what is described as the cold start problem in knowledgebased systems, we also assume that organisations and other employers will ideally provide their employees with an extension of PIMO-Upper that reflects the work context of that particular organisation. Within the ontologies stack (Fig. 13.2), such extensions are called group-level PIMOs. The reader can refer to the full specification (Sauermann et al. 2009) for further information about PIMO.

3

It should be noted that PIMO does not try to model every possible world view and achieve ontological perfection, but instead proposes a simple classification that we consider useful in the context of knowledge work.

13

The NEPOMUK Semantic Desktop

265

13.3.3 Lower Level Ontologies This consists of group and personal ontologies. Group-level ontologies (e.g. an organisational ontology) are domain-specific and provide more concrete representations of abstract concepts found in the upper ontologies. They serve as a bridge between abstract concepts defined in the upper level ontologies and concepts specified in personal ontologies at the individual level. Personal ontologies arbitrarily extend (personalise) group-level ontologies to accommodate requirements specific to an individual or a small group of individuals. Using common group-level and upper ontologies is intended to ease the process of integrating or mapping personal ontologies. Given the nature of the Semantic Desktop, a large number of ontologies are either related to, or meant to be used for personal knowledge management. A group of individuals or an individual user is free to create new concepts or modify existing ones for their collective (shared) or individual personal information models. This personal-user aspect of the ontologies is highlighted accordingly in the stack, and conceptually it includes all concepts and relationships that the end desktop user deals with, as opposed to all concepts and relations required to model every aspect of the semantic desktop.

13.4

Architecture

As noted in the beginning of Sect. 13.2, the Social Semantic Desktop platform exposes a series of low-level services required for building applications. This structuring is similar to publishing services on the Web, where each service exposes an interface used for communication and integration. Hence, our decision to adopt the same principles and techniques for describing and deploying the SSD architecture seems natural. The SSD is organised as a Service Oriented Architecture (SOA), where: • The SSD service interfaces are defined using the Web Service Description Language (WSDL), • XML Schema (XSD) is used for defining primitive types, and • Simple Object Access Protocol (SOAP) is used for the actual inter-service communication. The vision of the NEPOMUK project is to provide a standard architecture comprising a small set of services (represented by their interfaces), which enable developers to adopt it and extend it. Ultimately, this will lead to an evolving ecosystem. Figure 13.3 depicts the structure and the set of services defined by the NEPOMUK architecture. It is straightforward to observe the two categories of aspects that were targeted (emerged from the platform description): at the desktop level, the semantics (via Text Analytics or Context Elicitation), and between desktops, the social (enabled by the peer-to-peer (P2P) infrastructure). Both categories are accessible via the Service Registry, that act as an access point to

266

A. Bernardi et al.

Application Layer

File Browser

Email Client

Office Applications

Task Management

Web Browser

Wiki

...

...

Task Management

Community Management

EXT.

...

CORE

Social Semantic Desktop Middleware

Service Registry

Helper Services Alignment

Messaging

PIMO Service

Context Elicitation

Data Wrapper

P2P Infrastructure

Publish / Subscribe

Local Data Services

Event Management Search

Storage

Text Analytics

Mapping

Search

Storage

Fig. 13.3 The architecture of the social semantic desktop

all the low-level functionalities provided by the SSD platform. The NEPOMUK architecture is composed of two layers: the Middleware and the Application Layer. The Middleware groups together the services exposed by the platform and to be used by the applications present in the Application Layer. The Application Layer consists of all applications that interact directly with services published by the Middleware, and creates a bridge between the user and the low-level functionalities provided by the Social Semantic Desktop. In the following we describe both layers, starting with the NEPOMUK Middleware. The Middleware is split into multiple categories of services, managed by the Service Registry. This represents the access point to the low-level functionalities, both for services using other services, as well as, for applications using the Middleware services. Its duties relate strictly to registering and de-registering services, in addition to providing service discovery facilities based on their interfaces. Two sets of services, i.e., the Local Data Services and the P2P Infrastructure, represent the foundational block of the SSD Middleware. In order to support social aspects, and implicitly communication between several desktop, the SSD Middleware comprises a P2P Infrastructure. The NEPOMUK P2P Infrastructure is based on GridVine (Aberer et al. 2004), which in turn is built on top of P-Grid (Aberer et al. 2003). This manages a distributed RDF store and provides distributed search facilities, hence enabling higher-level functionalities such as meta-data or resources sharing. Additionally, the infrastructure also provides an Event Management service, which is responsible for the distribution of events between SSD peers,

13

The NEPOMUK Semantic Desktop

267

in addition to supporting the higher-level Publish/Subscribe service. The Event Management manages subscriptions received from users (via some applications) or from services, in form of RDF descriptions of the resources of interest, which are stored in the underlying distributed store. Hence, when an event occurs, its RDF payload is matched against all subscriptions and the subscribers are notified. The Local Data Services have a similar role to the P2P Infrastructure, but on the local side of things, i.e., on the desktop. The group consists of three foundational services: the Local Storage (an RDF Repository), Search and Mapping. The Local Storage controls the manipulation of the desktop semantic resources, including their insertion, modification or deletion as RDF graphs. If a resource is shared with other users in an information space, the meta-data is also uploaded to the distributed index of the peer-to-peer infrastructure. Querying the Local Storage is done via the Local Search service, which maintains also a context-based search history, as well as user-profiled query templates that can be also shared as resources. Finally, before new meta-data can be added to the repository, one needs to check whether this meta-data describes resources that are already instantiated (i.e., an URI has been assigned) in the RDF repository. In a positive case, instead of duplicating resources, the already existing ones should be used, by re-using their URIs. The Local Mapping Service handles this responsibility. The Core of the Middleware contains a last category of Services that complement the functionalities provided by the foundational ones, called Helper Services. Among these, the Data Wrapper or the Text Analytics services extract information from desktop applications such as email clients or calendars and store it as resources in the Local Storage. Generally, the Data Wrapper handles structured data sources (e.g., email headers, calendar entries, etc.), while the Text Analytics handles unstructured data sources, like email bodies or generic document contents. Other Helper Services include: • The Alignment service that is used by the other Middleware services or applications to transform RDF graphs from a source ontology to a target ontology (a facility required due to the different partly overlapping ontologies or vocabularies possibly being used on the desktop), • The Context Elicitation service that acquires the current user context environment by analysing the logs created by the Middleware and stored in the Local Storage, • The Publish / Subscribe service that enables subscription-based events (for services or users) on a local or distributed (via the P2P Event Management) basis, • The Messaging Service providing synchronous and asynchronous communication mechanisms between SSD users, or • The PIMO Service that represents an abstraction for an easier manipulation of RDF graphs. The second group of the Middleware services consists of Extensions. These are services created by third-party developers that use the Core services to provide certain functionalities for the Application layer. For example, a Task Management service could use the Context Elicitation and Messaging services to notify a group of users about an upcoming project deadline. While the actual business logic would be encapsulated within this service, the interaction with the

268

A. Bernardi et al.

user could be realized either via existing applications such as an Email Client, or via specific applications, like a Task Management application (as seen in the Application layer and discussed below). The top layer of the architecture is the Application layer. This layer includes the programs and tools employed by the user. This ranges from typical knowledge workbench applications of rather generic nature (e.g., File Browser, Web Browser, and Office Applications) to specialized and domain-specific programs. Both legacy tools and new developments need to be integrated with the Social Semantic Desktop Middleware in order to profit from its functionalities. For available legacy applications and third-party programs, this interfacing (or integration) is usually done by developing plug-ins, complying to the data structures and user interfaces used by the respective applications. As an example, in NEPOMUK, we developed plug-ins for the Email Clients Thunderbird and Microsoft Outlook. These extensions allow e.g. to automatically enrich e-mails (“Semantic Email”) with formal descriptions of the concepts concerned (thus offering sender and recipient of such e-mail an unambiguous reference to shared entities). Furthermore, the enhanced clients provide simple workflow functionalities, like delegation and tracking of tasks (Task Management) or automated calendar functionalities. Finally, Semantic Search capabilities are a promising feature, as targeted e.g. in the KDE Dolphin file browser.

13.5

Implementation

In NEPOMUK the above architecture was implemented in the Personal Semantic Workbench (PSEW). PSEW is the central user-interface to the NEPOMUK Semantic Desktop, it allows configuring data-sources, and connections to other programs as well as editing and browsing the personal ontology. PSEW was implemented in Java as an Eclipse-RCP application – an application framework built on top of the Eclipse code-base, providing user-interface controls as well as a high-level userinterface organisational concepts of perspectives, views and multi-document editors. A screenshot showcasing some of the main views of PSEW is shown in Fig. 13.4. Various versions of PSEW can be downloaded from http://dev.nepomuk. semanticdesktop.org/download/.

13.5.1 KDE In addition to the Java based research prototype PSEW, the NEPOMUK technologies have also been embedded in the KDE Desktop Environment (http:// kde.org/), which provides fundamental desktop functionalities like task- and filemanagement, and common core applications like web-browsers, internet chat, basic document editing etc. Traditionally, KDE has been used with the Linux operating system, but the newest version 4 is also available for Mac or Windows. In version 4

13

The NEPOMUK Semantic Desktop

269

Fig. 13.4 The personal semantic workbench – showing the PIMO class hierarchy, the PIMO editor editing the Claudia Stern concept, a timeline and a map-view

of the KDE system, NEPOMUK also plays a central role (See http://nepomuk.kde. org/), and it is now available to millions of KDE users world-wide, and this has as such become the most enduring concrete outcome of the NEPOMUK project. In KDE4 NEPOMUK an RDF store (based on Virtuoso, see http://virtuoso. openlinksw.com/) is available to all applications, and tagging, rating and commenting on files is available throughout the operating system. For example, one can replace the normal save/load file dialog with a Semantic view as shown in Fig. 13.5, where rather than saving a file into a particular folder, a file can be saved with particular tags, removing the burden of maintaining a strict hierarchical folder structure from the user. KDE also offers faceted browsing for desktop data, file indexing, full-text and structure desktop search and many other features.

13.6

Experiences & Applications

The ultimate goal of a Semantic Desktop is to increase the efficiency of information handling for its users, based on additional modelling efforts. Careful evaluation must therefore demonstrate whether the perceived benefits ultimately outweigh the perceived additional costs.

270

A. Bernardi et al.

Fig. 13.5 Semantic Save/load dialog in NEPOMUK-KDE – instead of specifying a folder for saving, the user only associates a number of tags with the document

From the scientific perspective, evaluations observe the user when they store, retrieve, and process information. To gain a relevant insight on real-world scenarios, it is beneficial to conduct evaluations with real users working with their real data. Measurement in such experiments is done mostly by observation or interviewing users in long-term case studies. Short-term laboratory experiments can also give insights on the immediate benefit of a certain feature, or to measure usability indicators.

13.6.1 Evaluating the Core NEPOMUK Application The core NEPOMUK Application, the Personal SEmantic Workbench (PSEW), was also evaluated independently of any of the case-studies. Several long-term studies with up to eight participants were carried out. Additionally, qualitative interviews with 22 members about possible use cases of the system have been carried out (Sauermann 2009). These studies come to the conclusion that relations are the key feature to retrieve information. Long-term users evolve a combined pattern of using text search, relations, and semantic wiki features in order to find

13

The NEPOMUK Semantic Desktop

271

information. The system supports an intuitive behaviour of navigation by taking small steps; a phenomenon previously observed by other researchers and described as “orienteering” (Teevan et al. 2004). In an earlier evaluation of NEPOMUK (Papailiou et al. 2008), problems were found when the terms in the user interface are of too technological nature, while the users prefer terms from their daily work processes. Also, a unification of various interfaces was desired, which in turn overlaps with Quan’s findings in his thesis Quan (2003). Unfortunately, the NEPOMUK-KDE Semantic Desktop implementation with the largest user-group has seen the least amount of formal evaluation so far. Informal reactions collected from individual users range from praising the unified tagging and the powerful search now available to criticising performance problems, on which one focus of further community development has now been put.

13.6.2 NEPOMUK Case-Studies In addition to the formal evaluation, NEPOMUK has proved it’s worth in practical applications. The prototypes developed in the NEPOMUK project were customised and deployed with four case-study partners: • SAP Research, Germany, developed the Kasimir task management prototype and additional productivity tools for Organisational Knowledge Management. The Kasimir prototype was evaluated at the SAP Research lab in Karlsruhe in a test phase of 4 weeks. The experience of the test users has been compiled in a survey and analysed on the basis of an activity theoretic evaluation approach. The results show that despite the fact that the prototype does not yet provide full functionality it was nevertheless perceived as useful and promising work tool. • Cognium Systems, France, developed a prototype called BioNote, a software system whose goal is to help biomedical researchers at Institute Pasteur to manage the information they collect or use during their work. The implemented prototype was assessed through iterative expert and user evaluations. The test user comments were generally encouraging: people understood and approved the general concept and added value of the prototype and they were able to easily carry out a simple scenario using the available user interfaces. Commercial products resulting from this work can be seen at: http://www.cogniumsystems.com/. • EDGE-IT, France, developed a prototype help-desk application for the members of the Mandriva Linux community. It features collaborative semantic annotation at the desktop or at the Web levels using a dedicated vocabulary, and semantic search across a set of peers. This allows interlinking a personal Semantic Desktop with a public Semantic Web maintained by a large community, improving the learning and problem-solving processes. The help-desk application was evaluated by Mandriva Linux users through an online questionnaire after experimenting with the system through evaluation scenarios. User answers to the questionnaire

272

A. Bernardi et al.

show a real interest in the approach: users consider that the help-desk improves the efficiency of the community for collectively bringing answers to technical questions. • TMI, a Greek consulting company, developed a collection of light-weight add-ons to the basic PSEW application, especially for providing social and semantic functionalities customised for knowledge workers in the sector of Professional Business Services. The tools are collectively known as Sponge, and take the form of widgets that can be placed on the desktop providing quick and easy access to common tasks such as search and annotation. The prototypes were evaluated both using the unobtrusive observation method using the “think aloud” protocol, as well as a more traditional questionnaire. Eleven employees in realistic work conditions at different offices too part in the evaluation, and the results confirm that the prototype was simple, intuitive, easy to use and satisfies most of the expected benefits of users.

13.7

Outlook

The NEPOMUK project ended in 2008, but the activities around the Semantic Desktop continue. The KDE implementation is still being actively maintained and enhanced, and the Open Semantic Collaboration Architecture Foundation (OSCAF) (http://www.oscaf.org/) was created to maintain the ontologies and other standards. Several of the components of the NEPOMUK implementation, such as the meta-data extraction framework Aperture (http://aperture.sf.net) are being used by many people and development continues. The research directions started in NEPOMUK go on in other research projects, such as Perspecting (http://www.dfki.uni-kl.de/perspecting/). In addition to the open-source and standardisation work, several spin-off companies were created to commercialise semantic desktop technologies. For instance, Gnowsis (http://gnowsis.com) recently launched their product Refinder (http://www. getrefinder.com/), a web-based productivity tool centred around the PIMO ideas. Acknowledgements This work was supported by the European Union IST fund (Grant FP6027705, Project NEPOMUK, http://nepomuk.semanticdesktop.org/) and the German BMBF in Project Perspecting (Grant 01IW08002).

References Aberer K, Cudre´-Mauroux P, Datta A, Despotovic Z, Hauswirth M, Punceva M, Schmidt R (2003) P-Grid: a self-organizing structured P2P system. SIGMOD Record 32(3):29–33 Aberer K, Cudre´-Mauroux P, Hauswirth M, Pelt, TV (2004), Gridvine: building internet-scale semantic overlay networks, 3th International Semantic Web Conference ISWC 2004, Springer Verlag, pp 107–121. http://lsirpeople.epfl.ch/aberer/PAPERS/ISWC2004.pdf, Accessed on 9 Aug 2011

13

The NEPOMUK Semantic Desktop

273

Carroll, JJ, Bizer C, Hayes P, Stickler P (2005) Named graphs, provenance and trust, WWW ’05: Proceedings of the 14th international conference on World Wide Web, ACM Press, New York, NY, USA, pp 613–622 Gudjonsdottir R (2010) Personas and Scenarios in Use. Doctoral Dissertation, Department of Human–Computer Interaction, Royal Institute of Technology, KTH, Stockholm, Sweden. Mylka A, Sauermann L, Sintek M, van Elst L (2007) Nepomuk information element ontology, http://www.semanticdesktop.org/ontologies/2007/01/19/nie/, Accessed on 9 Aug 2011 Papailiou N, Christidis C, Apostolou D, Mentzas G, Gudjonsdottir R (2008) Personal and group knowledge management with the social semantic desktop. In Cunningham P, Cunnigham M (eds) Collaboration and the knowledge economy: issues, applications and case studies, echallenges e-2008 conference, 22–24 October 2008. Stockholm, Sweden, pp 1475–1482 Quan D (2003) Designing end user information environments built on semistructured data models, PhD thesis, Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science Sauermann L (2009) The gnowsis semantic desktop approach to personal information management, PhD thesis, University of Kaiserslautern. http://www.dfki.uni-kl.de/~sauermann/papers/ Sauermann2009phd.pdf, Accessed on 9 Aug 2011 Sauermann L, Dengel A, van Elst L, Lauer A, Maus H, Schwarz S (2006) Personalization in the EPOS project. Proceedings of the semantic web personalization workshop at the ESWC 2006 conference, pp. 42–52. http://www.dfki.uni-kl.de/~sauermann/papers/Sauermann+2006a.pdf, Accessed on 9 Aug 2011 Sauermann L, van Elst L, M€ oller K (2009) Personal information model (PIMO), v1.1, Recommendation, NEPOMUK. http://www.semanticdesktop.org/ontologies/2007/11/01/pimo/v1.1/ pimo_v1.1.pdf, Accessed on 9 Aug 2011 Schwarz S (2010) Context-awareness and context-sensitive interfaces for knowledge work, Dissertation, Technische Universit€at Kaiserslautern, Fachbereich Informatik. http://www.dr. hut-verlag.de/978-3-86853-388-0.html, Accessed on 9 Aug 2011 Semy SK, Pulvermacher MK, Obrst LJ (2004) Towards the use of an upper ontology for U.S. government and military domains: An evaluation, Technical report, MITRE. http://www. mitre.org/work/tech_papers/tech_papers_04/04_0603/index.html, Accessed on 9 Aug 2011 Sintek M, Elst L, Scerri S, Handschuh S (2007a) Distributed knowledge representation on the social semantic desktop: Named graphs, views and roles in nrl, ESWC’07: Proceedings of the 4th European conference on The Semantic Web, Springer-Verlag, Berlin, Heidelberg, pp. 594–608 Sintek M, Elst LV, Scerri S, Handschuh S (2007b) Nepomuk representational language specification. Nepomuk specification. http://www.semanticdesktop.org/ontologies/nrl/, Accessed on 9 Aug 2011 Teevan J, Alvarado C, Ackerman MS, Karger DR (2004) The perfect search engine is not enough: a study of orienteering behavior in directed search. CHI ’04: Proceedings of the SIGCHI conference on Human factors in computing systems. ACM, New York, NY, USA, pp 415–422. http://portal.acm.org/citation.cfm?id¼985745, Accessed on 9 Aug 2011 van Heijst G, Falasconi S, Abu-Hanna A, Schreiber G, Stefanelli M (1995) A case study in ontology library construction. Artificial Intelligence in Medicine 7(3):227–255

14

Context-Aware Recommendation for Work-Integrated Learning Stefanie N. Lindstaedt, Barbara Kump, and Andreas Rath

14.1

Introduction

In order to improve knowledge work productivity we need to understand the factors influencing the use of knowledge within organizations. A host of management science research highlights the importance of ‘soft factors’ which influence the individual knowledge worker to apply her abilities, invest efforts, face frustrating experiences and to perform for the sake of the organization. Wall et al. (1992) extend the fundamental equation of organizational psychology to include the factor opportunity: Performance ¼ Ability  Motivation  Opportunity. That is, the performance of a knowledge worker is enhanced by organizational practices that increase the individual’s knowledge (ability), the individual’s motivation to use this knowledge, or the individual’s opportunity to do so in the workplace. This equation highlights the assumed non-compensatory relationship between the factors. If an individual lacks for example motivation (motivation ¼ 0), then the other factors could be as high as they may be, but the performance would still be zero. Our work focuses specifically on increasing the factor ability (by also taking the other two factors into account). That is, we strive to build computational support (so

S.N. Lindstaedt (*) Know-Center, Graz University of Technology, Inffeldgasse 21a, Graz A-8010, Austria Knowledge Management Institute, Graz University of Technology, Inffeldgasse 21a, Graz, A-8010, Austria e-mail: [email protected] B. Kump Knowledge Management Institute, Graz University of Technology, Inffeldgasse 21a, Graz, A-8010, Austria e-mail: [email protected] A. Rath Know-Center, Graz University of Technology, Inffeldgasse 21a, Graz A-8010, Austria e-mail: [email protected] P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5_14, # Springer-Verlag Berlin Heidelberg 2011

275

276

S.N. Lindstaedt et al.

called knowledge services) which enables users to continuously improve their competencies during work. Our approach builds upon the notion of WorkIntegrated Learning (WIL, see Sect. 14.2) which has the potential to improve knowledge work productivity by building awareness of relevant knowledge resources, pointing out learning opportunities, and improving task completion ability. We engaged in a 4 year quest for building a computational environment which supports WIL. This quest was undertaken within the integrated EU-funded project APOSDLE1. Applying a multitude of participatory design methods (shortly sketched in Sect. 14.3) we identified three key challenges: learning within real work situations, utilization of real work resources for learning, and learning support within the user’s everyday computational work environment. This chapter addresses mainly the first challenge (real time learning). Our participatory design studies indicate that learners require varying degrees of learning support in different ‘contexts’. Specifically, it is important to know and understand what the user is working on or is trying to achieve. In our work we distinguish between two types of context: On the one hand, we take the work situation into account by identifying the concrete work task a user is currently executing (e.g. preparing a project kick-off event), i.e. the work task specifies the short-term context of the user; On the other hand, we strive to infer the competencies a user possesses (e.g. experienced project manager); i.e. the accumulated experiences from work task executions specify the long-term user context. Our approach to supporting WIL in real time is to provide a variety of recommendation services which are adapted to the short-term as well as long-term user context. Specifically, we not only recommend documents but fine granular parts of documents (so-called snippets), people, possible learning goals, application opportunities, relationships between tasks, etc. In doing so, these recommendation services positively influence productivity. Section 14.4 introduces three different learning situations in the form of three WIL scenarios. These scenarios mainly differ in the available time which the user can spend to engage in a learning situation. Different types of recommendations (e.g. content versus learning opportunities) are helpful in these different situations but all of them need to be adapted to the current work task of the user and her competencies in order to improve productivity effectively. Our goal is the design of an environment which can provide learning support of varying degrees of learning guidance (see Sect. 14.3.3) independently from the application domain and which utilizes knowledge resources from within an organization for learning – thus keeping costs and efforts for learning material generation low. Section 14.5 offers a conceptual view of the APOSDLE environment which represents our ontology-based approach to designing domain-independent learning support. Within this chapter we focus specifically on three knowledge services which implement our approach to context-aware recommendation for improving knowledge work productivity, namely task detection service (Sect. 14.5.2), user

1

Advanced Process-Oriented Self-Directed Learning, www.aposdle.org.

14

Context-Aware Recommendation for Work-Integrated Learning

277

competence inference service (Sect. 14.5.3), and content recommendation service (Sect. 14.5.4). In other words, we present a design environment (Eisenberg and Fischer 1994) which enables the creation of environments for WIL support specifically tailored to the unique needs of a company and concrete learning domain. We see the “APOSDLE solution” as consisting of (a) modelling the learning domain and the work processes, (b) annotating documents and other sources of information available in the company repository, (c) training the prospective users of the APOSDLE environment, and (d) using the APOSDLE environment with its varying learning guidance functionalities at the workplace. We have evaluated our approach to WIL by embedding the APOSDLE environment for 3 months into three application organizations – not only technically but also socially by building the relevant processes around it. Section 14.6 shortly presents the results of our summative workplace evaluation and discusses modeling efforts needed during APOSDLE instantiation in a specific application domain.

14.2

Work-Integrated Learning

Building on theories of workplace learning (such as [Lave and Wenger 1991] and [Eraut and Hirsh 2007]) we conceptualize learning as a dimension of knowledge work which varies in focus (from focus on work performance to focus on learning performance), time available for learning, and the extent of learning guidance required. This learning dimension of knowledge work describes a continuum of learning practices which starts at one side with brief questions and task related informal learning (work processes with learning as a by-product), and extends at the other side to more formal learning processes (learning processes at or near the workplace). This continuum emphasizes that support for learning must enable a knowledge worker to seamlessly switch from one learning practice to another as time and other context factors permit or demand. Research on supporting workplace learning and lifelong learning so far has focused predominantly on the formal side of this spectrum, specifically on course design applicable for the workplace and combinations of face-to-face and online learning elements (blended-learning). In contrast, the focus of our work is on the informal side of the spectrum, specifically covering work processes with learning as a by-product and learning activities located within work processes. We have coined the term work-integrated learning (WIL) in order to refer to this type of informal learning practices at the workplace that are truly integrated in current work processes and activities. WIL is relatively brief and unstructured (in terms of learning objectives, learning time, or learning support). The main aim of WIL activities is to enhance task performance. From the learner’s perspective WIL can be intentional or unintentional, and the learner can be aware of the learning experience or not (Schugurensky 2010).

278

S.N. Lindstaedt et al.

WIL makes use of existing resources – knowledge artifacts (e.g., reports, project results) as well as humans (e.g., peers, communities). Learning in this case is a byproduct of the time spent at the workplace. This conceptualization enables a shift from the training perspective of the organization to the learning perspective of the individual.

14.3

Distributed Participatory Design

This section gives an overview of the activities and their settings leading to the development of the APOSDLE environment. The development process involved three prototyping iterations lasting 1 year each and involving in-depth requirements elicitation, conceptual design, implementation, and evaluation phases.

14.3.1 Application Domains and Ssettings The APOSDLE environment was designed in close cooperation and involvement of five different knowledge intensive application domains. Three application domains were chosen in collaboration with different enterprises participating in the project: simulation of effects of electromagnetism on aircraft (EADS – European Aeronautic Defense and Space Company, Paris, France), innovation management (ISN – Innovation Service Network, Graz, Austria), and intellectual property rights consulting (CCI Darmstadt – Chamber of Commerce and Industry, Darmstadt, Germany). Two additional domains refer to general methodologies that can be used in different settings and disciplines: the RESCUE process for the thorough elicitation and specification of consistent requirements for socio-technical systems, and the domain of statistical data analysis (SDA).

14.3.2 Design and Development Process The design process employed is an example of distributed participatory design, which has been carried out in the context of real-world project constraints on time and cost. The process consisted of instances of synchronous and asynchronous, distributed and non-distributed design activities, and also integrated activities designed to stimulate creative inputs to requirements. For example, the activities included workplace learning studies (Kooken et al. 2007) and surveys (Kooken et al. 2008), iterative use case writing and creativity workshops (Jones and Lindstaedt 2008) resulting in 22 use cases and more than 1,000 requirements. In order to improve the system throughout the development process, formative evaluations of the second prototype (Lichtner et al. 2009) were carried out that

14

Context-Aware Recommendation for Work-Integrated Learning

279

triggered a re-design of APOSDLE using the personas approach (Dotan et al. 2009). The third prototype was then exposed to extensive usability studies with students, application partners in real world settings and usability labs, and a variety of evaluations of individual components. A final summative evaluation spanning 3 months of real-world application concluded the process. The main findings of this summative evaluation are reported in Sect. 14.6.

14.3.3 Challenges for Supporting WIL With the described participatory design and development activities, three major challenges for WIL support were identified (see also Sect. 14.1): real time learning, i.e. learning within real work situations; utilization of real work resources for learning; and learning within a user’s everyday (real) computational environment. Real time learning: WIL support should make knowledge workers aware of and support them throughout learning opportunities relevant to their current work task. WIL support needs to be adapted to a user’s work context and her experiences, and should be short, and easy to apply. Real knowledge resources: WIL support should dynamically provide and make users aware of available knowledge resources (both human as well as material) within the organization. By providing ‘real’ resources the effort for learning transfer is reduced and the likelihood for offering opportunities to learn on different trajectories is increased. Real computational environment: WIL support should be provided through a variety of tools and services which are integrated seamlessly within the user’s desktop and allow one-point access to relevant back-end organizational systems. These tools and services need to be inconspicuous, tightly integrated, and easy to use. They must support the knowledge worker in effortlessly switching between varieties of learning practices. Concerning real time learning, our participatory design activities and workplace learning studies suggest that learners need different support and guidance within different work situations. Specifically, it became apparent that learning guidance is needed on varying levels ranging from descriptive to prescriptive support. While prescriptive learning guidance has the objective of providing clear directions, or rules of usage to be followed, descriptive learning guidance offers a map of the learning topic and its neighboring topics, their relationships, and possible interactions to be explored. Specifically, prescriptive learning support is based on a clearly structured learning process which imposes an order on learning activities while descriptive support does not do so. The learning guidance discussed here is applicable to WIL situations and covers the more informal side of the learning dimension of knowledge work. Clearly the spectrum of learning guidance could be extended to much more formal learning guidance approaches such as predefined learning modules and enforced learning processes. However, this is beyond the scope of our work. The learning guidance

280

S.N. Lindstaedt et al.

we consider and explore ranges from building awareness of descriptive learning support (exposing knowledge structures and contextualizing cooperation) to partially prescriptive (triggering reflection and systematically developing competencies at work). The following section illustrates how these different degrees of learning guidance are realized within the APOSDLE environment.

14.4

Providing Recommendations with Varying Degrees of Learning Guidance

Within this section we present varying types of context-aware recommendation functionalities for WIL in the form of three scenarios based on the ISN application case. These scenarios also provide an overview of the overall APOSDLE environment from the user’s point of view. Section 14.5 then examines the conceptual architecture together with the knowledge services which implement these recommendations. The following scenario illustrates varying types of learning guidance that we have developed. Our scenario is located in a company called ‘Innovation Service Network’ (ISN). ISN is a network of small consultancy firms in the area of innovation management. Consultants at ISN support customer companies in the introduction of innovation management processes and the application of creativity techniques. One of these consultants for innovation management is Eva. Eva has been assigned to lead a new project with a client from the automotive industry. The objective is to come up with creative solutions for fastening rear-view mirrors to the windshield.

14.4.1 Building Awareness: Recommendation of Snippets and People Let us assume that our innovation management consultant from the scenario, Eva, is in a hurry. She needs to plan the kick-off meeting for her new innovation project within the next hour. As Eva begins to create the agenda using her favorite word processor, APOSDLE automatically recognizes the topic of Eva’s work activity, namely “moderation”. A small pop-up notification (see Fig. 14.1) unobtrusively informs Eva that her work topic has been detected and that relevant information is available. Over the years the APOSDLE knowledge base has collected a large variety of resources (e.g. project documents, checklists, videos, pictures) about innovation management which Eva and her colleagues have produced or used. In the background, APOSDLE proactively searches the knowledge base utilizing the detected work topic together with information from Eva’s User Profile (see User Profile and

14

Context-Aware Recommendation for Work-Integrated Learning

281

Fig. 14.1 APOSDLE automatically detects a user’s context and displays notifications. In this case APOSDLE detected the Topic “Moderation” Eva is currently working on

Fig. 14.2 “APOSDLE Suggests” recommends Knowledge Resources for Eva’s current context (Topic “Moderation”). The tree view of Topics in the Browse Tab is shown on the left

Experiences in Sect. 14.5.3) to form a personalized query. Eva is interested in getting some help to speed up her work. Therefore, she accesses APOSDLE Suggests by clicking on the notification or the APOSDLE tray icon. APOSDLE Suggests (Fig. 14.2) displays a list of resources related to the topic “moderation” (see Sect. 14.5.2). This list of resources is ranked based on her expertise in moderation techniques. Eva finds a checklist for moderating a meeting or a workshop which was put together by a colleague in the past. She opens the checklist in the APOSDLE Reader (Fig. 14.3) which jumps to and highlights the most relevant part (called

282

S.N. Lindstaedt et al.

Fig. 14.3 APOSDLE Reader showing relevant information for Eva’s context. It highlights the relevant part in a document (left), suggests other relevant parts (Snippets) throughout the document as a ThemeRiver (center), and offers a more detailed list view of Snippets (right) which can be sorted according to different criteria

‘Snippet’) for her. In addition, the APOSDLE Reader indicates other parts of the checklist also relevant to Eva’s work task via a theme river (see yellow blocks within center part of Fig. 14.3). Eva finds some ideas suitable to her current project and integrates them into her own workshop preparation. APOSDLE supports Eva in performing her work task without her even having to type a query. Moreover, her own expertise level is taken into account when making recommendations. This unobtrusive proactive information delivery raises awareness of knowledge resources which Eva would not have searched for otherwise. It provides learning guidance in that it highlights possible learning opportunities within the current work task without imposing constraints on the learner.

14.4.2 Descriptive Learning Guidance: Recommendation of Learning Goals and Communication Channels After the kick-off meeting Eva prepares for the next step in the innovation project, namely a creativity workshop. Since she has never moderated such a workshop before, she takes some more time to explore different possibilities and their implications. Eva opens APOSDLE Suggests and starts searching for the keywords “creativity techniques” and “creativity workshop”. Eva selects the task “applying

14

Context-Aware Recommendation for Work-Integrated Learning

283

Fig. 14.4 Recommended resources can be refined according to a user’s Learning oals listed in the drop down box. Learning Goals allow narrowing down large lists of resources to specific needs of users

creativity techniques in a workshop”. APOSDLE Suggests analyzes her User Profile and recommends a number of possible Learning Goals she could pursue in the context of the chosen work task. These Learning Goals are related to competencies which she would need to execute the task properly and for which Eva has not exhibited a sufficient level of expertise, i.e. for which she has a competency gap. Eva selects one of the Learning Goals (e.g. basic knowledge about creativity techniques in Fig. 14.4) and thus refines the snippet and people recommendations. Eva opens a video which contains an introduction about creativity techniques and creativity. The APOSDLE Reader again highlights relevant parts of the video and provides an overview of the video by displaying a theme river similar to the one shown in Fig. 14.3. The video helps Eva to get a better understanding of basic creativity theories and methods. But she still has some more concrete questions in particular in the context of the snippet she has found. By simply clicking on ‘contact snippet author’, Eva contacts Pierre (another consultant in her company) to ask him about his experiences. APOSDLE supports Eva in selecting a cooperation tool by knowing Pierre’s preferred means of cooperation (e.g. asynchronous vs. synchronous, tools he uses, etc.). APOSDLE also contextualizes the cooperation by providing Pierre with the parts of Eva’s work context which are relevant to her question. That is, Pierre can review which resources Eva has already accessed (assuming Eva’s privacy settings allow this). Pierre accepts Eva’s request and Pierre and Eva communicate via Skype (Pierre’s preferred means of communication). Eva can take notes during the cooperation, and can reflect on the cooperation afterwards in a dedicated (Wiki) template. If Eva and

284

S.N. Lindstaedt et al.

Pierre decide to share this cooperation result with other APOSDLE users, the request, resources, notes and reflections will be fed into the APOSDLE knowledge base. After talking to Pierre, Eva continues with preparations for the upcoming creativity workshop. By exposing the relationships between topics and tasks of the application domain the learner is enabled to informally explore the underlying formal knowledge structures and to learn from them. Specifically, users can be made aware of topics relevant to the current task. These might constitute relevant learning goals for the future. In addition, APOSDLE supports communication between peers by helping to identify the right person to contact, to select the preferred communication channel, to contextualize the cooperation, and to document it if desired. It is up to the user if at all, in which situations, and in which order to take advantage of this support.

14.4.3 Partially Prescriptive Learning Guidance: Recommendation of Reflection Situations and Learning Paths Eva has some additional time which she wants to spend on acquiring in-depth knowledge about creativity techniques. She opens the APOSDLE Experiences Tab (see Sect. 14.5.3 for more details on the User Profile) and reflects on her past activities. This tab (Fig. 14.5) visualizes her own User Profile indicating which topics she routinely works with (middle layer), which topics she needs to learn more about (top layer), and in which topics she has expertise (bottom layer). She realizes that she is a learner in many of the common creativity techniques and therefore she decides to approach this topic systematically by creating a personalized Learning Path. Eva opens the Learning Path Wizard (Fig. 14.6) and browses through the task list. She selects the task “applying creativity techniques in a workshop”. Based on this task, the Learning Path Wizard suggests a list of topics to include in her Learning Path (see Sect. 14.5.1.1), and Eva adds some more creativity techniques Pierre mentioned in their last conversation. Eva saves the Learning Path and also makes it public so that other colleagues can benefit from it. To execute the Learning Path Eva then activates it in APOSDLE Suggests. At this time APOSDLE Suggests recommends relevant knowledge resources for the topic she selected from her Learning Path. Eva now follows her Learning Path in dedicated times during her working hours. Whenever new relevant resources are added to the knowledge base Eva is made aware of them. APOSDLE explicitly triggers the learner to reflect upon her (learner) activities while the reflection process itself is not formally supported but left to the user’s discretion. In addition, the creation of semi-formal Learning Paths for longer term and more systematic competence development is supported and partially automated. However, the time and method of Learning Path execution is not predetermined and can be performed flexibly.

Context-Aware Recommendation for Work-Integrated Learning

Fig. 14.5 The Experiences Tab provides users with an overview about their experiences with topics in the domain. APOSDLE uses three levels (Learner [top layer], Worker [middle layer], Supporter [bottom layer]) to indicate different levels of knowledge

14 285

286

S.N. Lindstaedt et al.

Fig. 14.6 Wizard for creating a Learning Path based on the topics available in the domain. The left column contains topics which have been recommended to reach a specific Learning Goal. Users can choose out of this list of Topics to assemble their individual Learning Path (right column)

14.5

Conceptual View on the APOSDLE Environment

As was illustrated in the above scenarios the APOSDLE environment provides a variety of recommendations to support WIL. Within this section we present our approaches to three key challenges for context-aware recommendation: automatic detection of a user’s work task, inference of a user’s competences based on her interactions, and the computation of the recommendation itself. All components have been designed and are implemented as domain-independent knowledge services (Lindstaedt et al. 2008). That is, none of the components embody application domain knowledge and thus constitute a generic design environment for WIL environments. In order to create a domain-specific WIL environment for a specific company, all application-specific domain knowledge has to be added to APOSDLE in the form of three ontologies (see Sect. 14.5.1) and the different knowledge resources within the knowledge base. Our approach to ontology engineering support using the ModellingWiki (MoKi) is presented in Chap. 12. In the present chapter, we first shortly present the structure and knowledge resources of the knowledge base which provide a conceptual basis for all other components (Sect. 14.5.1). Then, we describe our approach to automatically detecting a user’s work context (Sect. 14.5.2). We briefly introduce our method of unobtrusively diagnosing a user’s knowledge and skills, and recommendation services that make use of the information in the user profile (Sect. 14.5.3). Finally,

14

Context-Aware Recommendation for Work-Integrated Learning

287

we describe, how an associative network is used to retrieve relevant content for a task at hand (Sect. 14.5.4).

14.5.1 Knowledge Base Different types of Knowledge Resources are presented to the user within APOSDLE: Topics, Tasks, Learning Paths, Documents, Snippets, Cooperation Transcripts, and Persons. All of these resources can be organized into Collections which can be shared with others and thus may serve as Knowledge Resources themselves.

14.5.1.1

Topics, Tasks, Learning Goals, and Learning Paths

Topics, Tasks and Learning Paths are structural elements which are presented to the users and which can be used for accessing further Knowledge Resources. All of them are encoded within an integrated OWL ontology within the Knowledge Base and provide the basis for intelligent recommendation of resources and for inferences on the user’s competencies (Lindstaedt et al. 2009). Topics (domain model) are core concepts which knowledge workers in a company need to know about in order to do their jobs. For instance, Topics in the ISN domain are “creativity technique” or “workshop”. Each Topic has a description. A Topic can be added to a Collection, its relations with other Topics and with Tasks can be browsed or it can trigger recommendations in APOSDLE Suggests. Tasks (process model) are typical working tasks within a specific company. Examples for ISN Tasks include “applying creativity techniques in a workshop” or “identifying potential cooperation partners”. Each Task has a description. In addition, to each Task a set of Learning Goals is assigned which are required for performing the Task successfully. For instance, for the ISN task “applying creativity techniques in a workshop” one required Learning Goal might be “basic knowledge about creativity techniques”. Each of these Learning Goals is related to one Topic. That way, Tasks and Topics are inherently linked. A Task in APOSDLE can be added to a Collection, its relations with other Tasks and with Topics can be browsed and it can trigger suggestions in APOSDLE Suggests. In essence, a Learning Path is a sequence of Topics for which recommendations can be obtained in APOSDLE Suggests. The sequence of Topics about which knowledge should be acquired shall maximize learning transfer and follows a prerequisite relation computed on the Learning Goal model based on competence-based knowledge space theory (Ley et al. 2008). Learning Paths are generated by APOSDLE users themselves with the help of a Learning Path Wizard (Sect. 14.4.3) starting from a Task, a Collection, or a Topic. Learning Paths can be shared with others or added to a Collection.

288

14.5.1.2

S.N. Lindstaedt et al.

Documents, Snippets, and Cooperation Transcripts

Documents, Snippets and Cooperation Transcripts are the actual ‘learning content’ within APOSDLE. They constitute previous work results of knowledge workers in the company which can be accessed. Such context-related knowledge artifacts improve the likelihood of offering highly relevant information which can be directly applied to the work situation with little or no learning transfer required. In addition, they have the advantage that no additional learning content has to be created. By Documents, we understand both textual and multimedia documents which can be accessed in the APOSDLE Reader. Documents can be opened and saved, shared with others, added to a Collection or rated. Snippets are parts of (textual or multi-media) documents annotated with one Topic which can be viewed in the APOSDLE Reader. Users can create Snippets by highlighting a part of a Document and annotating it with one Topic from the domain ontology, share Snippets with their colleagues, add them to a Collection, and rate them. In addition, APOSDLE automatically generates Snippets fitting to the domain ontology provided. Cooperation Transcripts are textual documentation of information exchanged during cooperations. Cooperation Transcripts can be fed back into APOSDLE and made available in APOSDLE Search or Suggest.

14.5.1.3

Knowledgeable Persons

All APOSDLE users are potential sources of knowledge and hence constitute Knowledge Resources. Knowledgeable Persons are identified topic-wise, i.e. there are no ‘overall Knowledgeable Persons’ but only Knowledgeable Persons for a Topic at hand. For instance, a person can be knowledgeable with respect to the Topic “workshop” but might have little knowledge about the Topic “creativity technique”. The information of who is a knowledgeable person at a certain point in time for a Topic at hand is obtained from the APOSDLE User Profile (see Sect. 14.5.4). Persons can be contacted directly or be added to Collections for future contact.

14.5.2 Automatically Determining the User’s Work Task (Short-Term Context) Within this section we present our approach to automatically determining a user’s current work task based on her interactions (e.g. keystrokes, application specific events) with the computer. The unique characteristic of our approach is the use of a generic ontology to represent the user interaction context which preserves and establishes the relationships between knowledge resources. It is utilized to engineer features which improve task detection precision also for knowledge intensive tasks.

14

Context-Aware Recommendation for Work-Integrated Learning

289

The identification of the current work task on the one hand triggers the contextaware recommendation services (see Sect. 14.5.4) and on the other hand serves as input for inferring a user’s competences (see Sect. 14.5.3).

14.5.2.1

User Interaction Context Ontology

We refine Dey’s definition of context (Dey et al. 2001) by focusing on the user interaction context that we define as “all interactions of the user with resources, applications and the operating system on the computer desktop” (Rath et al. 2009). Various context model approaches have been proposed, such as key-value models, markup scheme models, graphical models, object oriented models, logic-based models, or ontology-based models (Strang and Linnhoff-Popien 2004). However, the ontology-based approach has been advocated as being the most promising one (Baldauf et al. 2007) mainly because of its dynamicity, expressiveness, and extensibility. We have defined a user interaction context ontology (UICO) (Rath et al. 2009) which represents the user interaction context through 88 concepts, 215 datatype and 57 objecttype properties. It is modelled in the ontology web language (OWL), a W3C standard for modelling ontologies widely accepted in the Semantic Web community. The majority of concepts represents the types of user interactions and the types of resources. The high number of datatype properties represents data and metadata about resources and application user interface elements the user interacted with. The objecttype properties relate (1) the user interactions with resources, (2) resources with other resources or parts of resources, and (3) user interactions with themselves for modelling the aggregation of user interactions. Context observers, also referred to as context sensors, are programs, macros and plug-ins that record the user’s interactions on the computer desktop. It is important to note that the UICO is a generic ontology for personal information management which covers most resource, interaction types, and applications available to the user at a typical windows desktop computer. It can easily be extended to include more specialized applications. From a data perspective, the UICO is a much richer representation of the user’s interaction context than is typically preserved in simple sensor streams. From a semantic perspective, the UICO transcends top–down approaches to semantic desktop ontology design in not only providing high level concepts but connecting them to low level sensor data. We argue that by relating semantics with sensor data the UICO lends itself naturally to: (1) a variety of context-aware applications, and (2) “mining” activities for in-depth analyzes of user characteristics, actions, preferences, interests, goals, etc.

14.5.2.2

Automatic Population of the UICO

We developed a broad range of context sensors for standard office applications and the operating system Microsoft Windows (XP, Vista and 7). A complete list of

290

S.N. Lindstaedt et al.

sensors is given in (Rath et al. 2009). The sensed contextual data sent by the context sensors is used as a basis for automatically populating the UICO. Automatic population here means an autonomous instantiation of concepts and creation of properties between concept instances of the UICO based on the observed and the automatically inferred user interaction context. For example, if a user copies a piece of text from an e-mail to a word document we will automatically create an instance of the concept e-mail and the concept word document within the UICO and connect them via a relationship link. The automatic population exploits the structure of user interface elements of standard office applications and preserves data types and relationships through a combination of rule-based, information extraction and supervised learning techniques. We also use our knowledge discovery framework, the KnowMiner (Klieber et al. 2009) to perform named entity recognition of persons, locations and organizations as well as for extracting data and metadata of various resource types. Hence, the UICO is a much richer representation of the user interaction context than is typically stored in attention metadata sensor streams (Wolpers et al. 2007) since it preserves relationships that otherwise are lost.

14.5.2.3

Task Detection as a Classification Problem

Performing task detection consists of training machine learning algorithms on classes corresponding to task models. This means that each training instance presented to the machine learning algorithms represents a task that has to be ‘labelled’. Thus, training instances have to be built from features and feature combinations derived from the user context data on the task level. In our ontology-based approach, this means deriving features from the data associated with a Task concept. Based on our UICO, we have engineered 50 features for constructing the training instances. They are grouped in six categories: (1) action, (2) application, (3) content, (4) ontology structure, (5) resource, and (6) switching sequences. We use the machine learning toolkit Weka (Witten and Frank 2005) for parts of the feature engineering and classification processes. A number of standard preprocessing steps are performed on the content of text-based features.

14.5.2.4

Evaluations

We have performed three laboratory experiments for evaluating the influence on our ontology-based user task detection approach of the following factors: (1) the classifier used, (2) the selected features, (3) the task type, and (4) the method chosen for training the classifiers. We have gained several insights from our evaluation. First, the J48 decision tree and Naı¨ve Bayes classifiers provide better classification accuracy than other classifiers, in our three experiments. Second, we have isolated six features that present a good discriminative power for classifying tasks, namely the accessibility object name feature, the window title feature, the used resource metadata feature, the accessibility object value feature,

14

Context-Aware Recommendation for Work-Integrated Learning

291

the datatype properties feature and the accessibility object role feature. Because of the low standard deviation values associated with them, the performance of these six features also proves to be stable across datasets. Third, even though it could seem easier to classify routine tasks, our experiments show that knowledge intensive tasks can be classified as well as routine tasks. For example, within the domain of computer science students the following tasks can be considered routine tasks: registering for an exam, finding course dates, reserving a book from the university library, etc. On the other hand knowledge intensive tasks here include: programming an algorithm, preparing a scientific talk, planning a study trip, etc. We attribute this result to the fine granularity of the usage data captured within the UICO. Fourth, we have shown that a classifier trained by a group of experts on standardized tasks also performs well while classifying personal tasks performed by users. This result suggests, that the classifier can be trained by a domain expert and then utilized by other users – eliminating the time intensive training period for individual users. For more details please refer to (Rath et al. 2010). In future work we will investigate combining unsupervised learning mechanisms for identifying boundaries in the user interaction context data, based on the six discovered context features and applying the J48 decision tree and Naı¨ve Bayes learning algorithms for classifying these clusters to task classes.

14.5.3 Inferring the User’s Competencies (Long-Term Context) Within this section we present our approach to inferring a user’s competencies based on Knowledge Indicating Events (KIE, see below) and thus automatically maintaining her user profile. The major KIE we have examined is the execution of work tasks. The KIE approach distinguishes itself from other approaches in the user modeling field in that it takes into account user events which occur naturally during everyday work as opposed to being restricted to events within specialized eLearning systems. The inferred user competencies are used to rank the learning goal and content recommendations and form the basis for the recommendation of subject matter experts.

14.5.3.1

Knowledge Indicating Events

We suggest tackling the challenge of user profile maintenance by observing the naturally occurring actions of the user (Jameson 2003) which we interpret as knowledge indicating events (KIE). KIE denote user activities which indicate that the user has knowledge about a certain topic (Ley et al. 2008). Within our first two prototypes we have based the maintenance of the user profile solely on information on past tasks performed (task-based knowledge assessment). The algorithms for maintaining the user profile and the ranking of learning goals were based on competence-based knowledge space theory (cbKST, Korossy 1997)

292

S.N. Lindstaedt et al.

which is based on Doignon and Falmagne’s knowledge space theory (Doignon and Falmagne 1985). It is a framework that formalizes the relationship between overt behavior (e.g. task performance) and latent variables (knowledge and competencies needed for performance). While there is some evidence that in fact most learning at the workplace is connected to performing a task, and that task performance is a good indicator for available knowledge in the workplace, this restriction to tasks performed certainly limits the types and number of assessment situations that are taken into account. We have therefore extended our approach and looked at a variety of additional potential KIEs. Examples include communication with other users about a topic or the creation of documents which deal with a topic. KIE thus are based on usage data. Our approach goes into a similar direction as Wolpers et al. (2007), who suggested using attention metadata for knowledge management and learning management approaches. This idea is similar to the approach of evidence-bearing events (e.g. Brusilovsky 2004). By now, the approaches of attention metadata and evidencebearing events have been discussed from a rather technical point of view, and how the approaches, once implemented, could be used in different settings. With our approach to KIE, we extend the technical perspective by taking into account the entire process of implementing the KIE approach in a learning system, from identifying potential KIE to their evaluation.

14.5.3.2

User Profile

We constitute the user profile as an overlay of the topics in the knowledge base (Sect. 14.5.1; see also Lindstaedt et al. 2009). In APOSDLE’s second prototype, the user profile was maintained using the following rule: whenever a user executes a task (e.g. workshop preparation) within the environment the counter of that task within her user profile is incremented. The user profile counts how often the user has executed the task in question. It therefore constitutes a simple numeric model of the tasks which are related to one or several topics in the domain. Based on the learning goal model we can infer that the user has knowledge about all the topics related to that task. By means of an inference service (see below), information is propagated along the relationships defined by the learning goal model (see Sect. 14.5.1; Lindstaedt et al. 2009), and the counters of all topics related to the task are also incremented. Consequently, the user profile contains a value for each user and each topic at any time during system usage. In APOSDLE’s third prototype, the simple numeric user profile was changed into a qualitative user profile that distinguishes three qualitatively different knowledge levels (learner, worker, supporter). Therefore, we extended our set of KIE and assigned to each knowledge level those events which indicated the respective knowledge level. For example, ‘asking for a learning hint’ is an event that indicates ‘learner’ knowledge level, ‘performing a task’ would be ‘worker’ knowledge level and ‘being contacted about a certain topic’ would be supporter knowledge level. We then tracked all KIE that occurred for a user and developed an algorithm that allowed us to diagnose

14

Context-Aware Recommendation for Work-Integrated Learning

293

one of the three knowledge levels for each topic in the domain the user has used within APOSDLE (e.g. by opening a document, carrying out a task etc.).

14.5.3.3

Learning Goal Ranking

A user’s learning need is inferred in three steps (Lindstaedt et al. 2009). Starting with the user’s current task, the learning goal model is queried to retrieve the required learning goal vector r for this task (step 1). The vector r represents for all learning goals of the domain whether or not they are required to perform the user’s current task. In step 2, the user profile is queried with the required learning goal vector r as parameter to retrieve the current knowledge levels vector k for the user. The vector k consists of one of three knowledge levels for all topics which are referenced within vector r. The third step generates the learning need g by ranking the knowledge levels of all required topics (vector k) from learner topics (top of the list) to supporter topics (bottom of the list). The ‘lower’ the knowledge level of a topic in the learning goal vector g, the higher the rank of the learning goal. The ‘most required’ learning goal is therefore listed on the top of the learning need. If there are multiple topics with the same knowledge level, these topics which are assigned to more tasks in the knowledge base are ranked higher. This simple rule ensures that the prerequisite relation that is assumed between topics of the knowledge base is taken into account (see Ley et al., 2009). The learning need is used by APOSDLE in two ways. An application running in the working environment of the user visualizes the result as a ranked list (see Fig. 14.3). The ‘top’ learning goal is automatically pre-selected, which invokes the Associative Retrieval Service (see Sect. 14.5.4) to find knowledge resources relevant for the ‘most pressing’ learning need. The user can select other learning goals from the ranked list and thus filter the offered knowledge resources accordingly.

14.5.3.4

Identifying Knowledgeable People

Within APOSDLE, a People Recommender Service aims at finding people within the organization who have expertise related to the current learning goal of the user. Obviously, the People Recommender Service is based on the information in the user profile. Users specialising in certain topics are represented in the user profile with high knowledge levels for these topics. Other users can now individually be provided with colleagues having equal or higher experience. Compared to e.g. the MetaDoc system (Boyle 1994) this service uses a more dynamic way of identifying experts. Knowledgeable users are identified by comparing the current knowledge levels vectors of all users with the knowledge level vector of the user who will receive the recommendation. To infer knowledgeable users, the People Recommender Service utilises the Learning Need Service (see Sect. 14.5.3.3) to retrieve current knowledge levels vectors for all users. The next step removes all users with lower knowledge levels compared to the user receiving the recommendations. The remaining users are

294

S.N. Lindstaedt et al.

then ranked according to their knowledge levels in the current knowledge level vectors. The most knowledgeable user will be ranked highest. The service can be configured to also use the availability status of users as a ranking criterion.

14.5.3.5

Evaluation

We conducted a variety of studies to evaluate the automatically maintained user profile and its related services (Lindstaedt et al. 2009) of which we here only report on one that addresses the accuracy and usefulness of the learning goal ranking. In a lab study psychology students were observed and interviewed while they were trying to learn with APOSDLE in the learning domain of statistical data analysis. Our aim was to investigate the effects of the learning goal ranking on the actual performance of users in realistic tasks which they were not able to solve before the study (pre-test). In the pilot study, control groups were used to compare three different versions of the ranking algorithm: (a) the ranking algorithm as it was designed for APOSDLE (taking into account both the requirements of the task and the knowledge of the user), (b) a shuffled list of learning goals required for the task at hand (taking into account the requirements of the task but not the knowledge state of the user), and (c) a set of learning goals randomly selected (neither taking into account requirements of the task, nor the knowledge state of the user). Each of the participants had to solve three different tasks, one for each version of the algorithm. With versions (a) and (b), the previously unknown tasks could be solved by all participants, whereas the task could be solved by none of them when algorithm (c) was applied. Additionally, a slight difference in the users’ behavior was found between versions (a) and (b): In case of version (a), users by tendency selected less learning goals and more frequently carried out learning activities for learning goals on the top of the list in comparison with version (b) of the ranking algorithm. This serves as an indicator that the ranking algorithm is useful but clearly more studies are needed.

14.5.4 Recommending Content Relevant to the Work Task We introduce a hybrid context-based search mechanism on the basis of an associative network. The network consists of a semantic layer which is built from the domain ontology and a content-based layer which is built from the textual knowledge artifacts of the organization. This hybrid approach combines semantic-similarity with text-based similarity measures in order to improve retrieval performance. The novelty of our approach lies in combining spreading activation search in both layers using one and the same model. Here spreading activation (Crestani 1997) is used for all three types of search: search for documents based on a set of Topics, associative search for Topics, and associative search for documents/snippets. This allows uniform search based on the detected user work task.

14

Context-Aware Recommendation for Work-Integrated Learning

14.5.4.1

295

Associative Retrieval Service

The Associative Retrieval Service (Scheir et al. 2008) relies on knowledge contained in the domain ontology and the statistical information in a collection of documents. The service is queried with a set of Topics from the ontology and returns a set of snippets. As discussed above, snippets in the environment are annotated with ontological Topics. In APOSDLE, the annotation process is performed manually for a training set which is then utilized to train a classifier to automatically create and annotate snippets. Topics from the ontology are used as metadata for snippets in the system. In contrast to classical metadata, the ontology specifies relations between the Topics (Fig. 14.7). For example, class-subclass relationships are defined and domainspecific relations between Topics are modeled. The structure of the ontology is used for calculating the similarity between two Topics in the ontology (see below). This similarity is then used to expand a query with similar Topics before retrieving documents dealing with this set of Topics. After thus retrieving documents based on metadata, the result set is expanded by means of textual similarity. The implementation of the associative network allowed us to develop and test different combinations of query and result expansions that are based on the spreading activation algorithm. The three concept similarity measures used are: a measure based on the shortest path between two Topics in the same class hierarchy, the measure of Resnik (1999) and a vector measure based on the properties which relate Topics in an ontology. All three measures share the fact, that for calculating the semantic similarity between two Topics these two Topics have to originate from the same ontology.

Concept to Concept layer (C2C)

Concept to Document layer (C2D)

Document to Document layer (D2D)

Fig. 14.7 Anatomy of the associative network

296

14.5.4.2

S.N. Lindstaedt et al.

Evaluation

In our evaluation we compare the search performance of this associative network using a number of different similarity measures. All associative search approaches employing semantic similarity, text-based similarity or both, increase retrieval performance compared to the baseline. In addition, since there exist no standardized test corpora for semantic retrieval we built such a test corpus based on an application case within the APOSDLE project. We tentatively conclude that text-based methods for associative retrieval result in an increase in retrieval performance (Scheir et al. 2008); therefore we want to explore the approach of attaching a set of terms to every Topic in our domain ontology during modeling time to provide search results even for Topics that are not used for annotation. In addition we want to extend our research towards the application of different semantic similarity measures within our service (Stern et al. 2010). A key research question for the future is the appropriate selection of similarity measures for given ontologies. Therefore further experiments with different ontologies have to be conducted.

14.6

Summative Evaluation

As mentioned in the introduction, we see the “APOSDLE solution” as consisting of (a) modelling the learning domain and the work processes, (b) annotating documents and other sources of information available in the company repository, (c) training the prospective users of the APOSDLE environment, and (d) using the resulting domain-specific WIL environment with its varying learning guidance functionalities at the workplace. This means that a comprehensive summative evaluation of the APOSDLE solution requires a summative evaluation of each of these aspects. This is even more mandatory as the aspects depend on each other. If the domain modelling has not been done correctly, the annotation will fall short of what is needed; if the annotation is done badly retrieval of relevant information will be unsatisfactory; if the users are not well trained, their use of the APOSDLE system will be sub-optimal. Within this chapter we shortly report on results of the workplace evaluation (step d) and briefly discuss the efforts required for model creation (step a). The modelling of the learning domain and the work processes were conducted over a period of 2–3 months (see also Chap. 12). The workplace evaluation assessed the third APOSDLE prototype in use at the sites of three application organizations, EADS, ISN and CCI (for brief descriptions see Sect. 14.3). It spanned a period of about 3 months and involved 19 persons. EADS, CCI, and ISN reported modelling efforts between 59 and 304 person hours for domain, task, and learning goal models ranging from 94 to 145 Topics, 13–100 Tasks, and 59–291 Learning Goals.

14

Context-Aware Recommendation for Work-Integrated Learning

297

For the evaluation a multi-method data collection approach was followed using a questionnaire, interviews, log data, user diaries kept while working with APOSDLE, and site visits. This allowed for triangulation of results. An overview of the findings is given in the following. Please refer to (Dotan et al. 2010) for details.

14.6.1 Workplace Evaluation At the beginning of the APOSDLE project all application partners were asked to express which goals they would like to reach by employing computational support for WIL. The following goals were expressed by all three application partner organizations: 1. 2. 3. 4. 5. 6. 7.

Learning material relevant to current task Aware of learning material Existing knowledge improved High quality learning material provided Learning helped task completion Learning time planned and managed Experts accurately sorted by relevance

Within the exit questionnaire the participants of the three companies that participated in the usage evaluation were asked to which extent they thought that these goals were reached by APOSDLE. The exit questionnaire was filled out by 19 participants. Figure 14.8 shows the mean and standard deviation on a 5-point Likert scale for each question. It shows that all goals were reached to a large extent. Two main findings were observed: 1. APOSDLE was used most frequently by trainees and new employees who were expected to learn and were also given the time to do so. The highly-specialized content recommended was appreciated and end users reported they could not have accessed it that effectively by other means. These learners used all features of the system in various combinations to access and manage their learning

Fig. 14.8 Exit questionnaire results

298

S.N. Lindstaedt et al.

process. In contrast, the work schedule of ‘regular’ and ‘expert’ knowledge workers was to a large extent dictated by clients’ needs. This meant that work activities were often unexpected, performed under time pressure and left little room for learning activities. This led to sporadic and less-frequent interaction with APOSDLE. 2. APOSDLE was especially effective within high specialized domains in which much of the domain knowledge is documented. APOSDLE proved less effective in broad customer-driven domains where knowledge was shared to a large extent in person. One reason for this result probably was that in those domains documentation was not part of the established work practice and thus the system did not have access to all knowledge. This was aggravated by the fact that users in these domains worked in the same offices and extensively shared knowledge face-to-face; therefore collaboration support provided by APOSDLE was not utilized often. During the evaluation period and across all three sites there was clear evidence that using the APOSDLE environment improved people’s knowledge in various ways. Assessing whether knowledge has been improved and to what extent has been based on personal accounts (diary entries and interviews) describing enhanced understanding of topics and tasks following different kinds of interactions with APOSDLE. Overall APOSDLE supported the acquisition of new knowledge by the users by making them aware of learning material, learning opportunities and by providing different degrees of learning guidance. In EADS especially, it was reported on numerous occasions in the user diary that explicit and implicit learning material enabled knowledge workers to gain useful insight, improve their knowledge, and complete a task they were working on. In all application cases, users utilized the awareness building and descriptive learning guidance (e.g. exposing knowledge structures) more often than the more prescriptive learning guidance (e.g. triggering reflection, learning paths). Learners extensively used the different functionalities to browse and search the knowledge structures (descriptive learning guidance), followed the provided content suggestions (awareness), and collected relevant learning content within Collections. Learning Paths were used by trainees and new employees in order to structure and plan their own learning process. Their potential as a teaching tool for experts was not realized since experts only rarely used the system. The reflection tool (MyExperiences, see Fig. 14.5) was employed by learners mainly to examine the environment’s perception of their usage behaviour. To which extent this also lead to reflection of their learning activities could not be identified.

14.7

Conclusion

One overall conclusion of the workplace evaluation is that the WIL approach has proven effective for (a) end users in explicit learner roles (e.g. trainees) in (b) highly-specialized domains (such as EADS’s Electromagnetism Simulation

14

Context-Aware Recommendation for Work-Integrated Learning

299

domain) in which much of the knowledge to be learned is documented within work documents. In those circumstances, APOSDLE delivered an effective workintegrated learning solution that enabled relatively inexperienced knowledge workers to efficiently improve their knowledge by utilizing the whole spectrum of learning guidance provided. Our results concerning improving productivity of experienced knowledge workers are inconclusive. Further evaluations have to be conducted to determine the effect on topic experts over time. Secondly, our findings show that awareness building and descriptive learning guidance effectively support learning tightly intertwined with task executions. These ‘soft’ learning guidance mechanisms were used frequently by users of all levels of expertiese. Moreover, people did not consider them as additional steps or efforts but rather as inherently part of task execution. On the other hand, our partially prescriptive support mechanisms were used nearly exclusively by novices and new employees. This suggests that supportive measures derived from instructional theories which are focusing on longer term learning processes require a ‘learner’s mindset’ and time dedicated to learning. Finally, we can conclude that the domain-independent WIL design environment approach was successful. Relying on existing material instead of tailor made learning material provided to be effective and cost efficient. Crucial for this is having good modelling tools, experienced modellers, and high quality annotations of snippets (see Chap. 12). In a recent instantiation within a new organization and new application domain we were able to further reduce instantiation efforts (compare above for reported efforts of EADS, ISN, and CCI) to 120 person hours for 51 Topics, 41 Tasks, and 124 Learning Goals. We believe that these numbers are quite competitive when comparing them to efforts needed to instantiate a traditional Learning Management System at a site and to develop custom learning material. Acknowledgements The Know-Center is funded within the Austrian COMET Program - Competence Centers for Excellent Technologies - under the auspices of the Austrian Ministry of Transport, Innovation and Technology, the Austrian Ministry of Economics and Labor and by the State of Styria. COMET is managed by the Austrian Research Promotion Agency FFG. APOSDLE (www.aposdle.org) has been partially funded under grant 027023 in the IST work programme of the European Community.

References Baldauf M, Dustdar S, Rosenberg F (2007) A survey on context-aware systems. Int J Ad Hoc Ubiquitous Comput 2(4):263–277 Boyle C (1994) An adaptive hypertext reading system. User Model User Adapt Interact 4(1):1–19 Brusilovsky P (2004) KnowledgeTree: A Distributed Architecture for Adaptive E-Learning. In: Proceedings of WWW 2004, May 17–22, 2004, New York, New York, USA, 104–113 Crestani F (1997) Application of spreading activation techniques in information retrieval. Artif Intell Rev 11:453–482

300

S.N. Lindstaedt et al.

Dey AK, Abowd GD, Salber D (2001) A conceptual framework and a toolkit for supporting the rapid prototyping of context-aware applications. Human Comput Interact 16(2):97–166 Doignon JP, Falmagne JC (1985) Spaces for the assessment of knowledge. International Journal of Man-Machine Studies 23:175–196 Dotan A, Maiden NAM, Lichtner V, Germanovich L (2009) Designing with only four people in mind? – A case study of using personas to redesign a work-integrated learning support system. In: Gross T et al (eds) Proceedings of INTERACT 2009, Part II, Uppsala, Sweden, pp 497–509 Dotan A, Maiden N, Lockerbie J, de Hoog R, Leemkuil H, Ghidini C, Rospoche M, Lindstaedt SN, Kump B, Pammer V, Faatz A, Zinnen A (2010) Summative evaluation report, deliverable D6.12, EU project 027023 APOSDLE, City University, London, 2010 Eisenberg M, Fischer G (1994) Programmable design environments: integrating end-user programming with domain-oriented assistance. In: Adelson B, Dumais S, Olson J (eds) CHI’94. Conference proceedings, human factors in computing systems. ACM, New York, pp 431–437 Eraut M, Hirsh W (2007) The significance of workplace learning for individuals, groups and organisations, SKOPE is based at Oxford and Cardiff universities Jameson A (2003) Adaptive interfaces and agents. In: Jacko J, Sears A (eds), The human-computer interaction handbook: Fundamentals, evolving technologies and emerging applications. Mahwah, NJ: Erlbaum, pp 305–330 Jones S, Lindstaedt S (2008) A multi-activity distributed participatory design process for stimulating creativity in the specification of requirements for a work-integrated learning system. Workshop at CHI 2008, Inderscience, www.inderscience.com ¨ ttl G, Granitzer M (2009) Knowledge discovery using the Klieber W, Sabol V, Muhr M, Kern R, O KnowMiner framework. In: Proceedings of the IADIS’09, 2009, Inderscience, www. inderscience.com Kooken J, Ley T, de Hoog R (2007) How do people learn at the workplace. Investigating four workplace learning assumptions. In: Proceedings of EC-TEL 2007, Crete, Greece, pp 158–171 Kooken J, de Hoog R, Ley T, Kump B, Lindstaedt SN (2008) Workplace learning study 2. Deliverable D2.5, EU project 027023 APOSDLE, Know-Center, Graz, 2008 Korossy K (1997) Extending the theory of knowledge spaces: a competence-performanceapproach. Zeitschrift f€ ur Psychologie 205:53–82 Lave J, Wenger E (1991) Situated learning: legitimate peripheral participation. Cambridge University Press, Cambridge Ley T, Ulbrich A, Scheir P, Lindstaedt SN, Kump B, Albert D (2008) Modelling competencies for supporting work-integrated learning in knowledge work. J Knowledge Manage 12(6):31–47 Ley T, Kump B, Maas A, Maiden N, Albert D (2009) Evaluating the Adaptation of a Learning System before the Prototype Is Ready: A Paper-Based Lab Study. UMAP 2009: 331–336, Trento, Italy Lichtner V, Kounkou A, Dotan A, Kooken J, Maiden N (2009) An online forum as a user diary for remote workplace evaluation of a work-integrated learning system. Proceedings of CHI 2009, 2009, Boston, MA Lindstaedt SN, Beham G, Kump B, Ley T (2009) Getting to know your user – Unobtrusive user model maintenance within work-integrated learning environments. In: Proceedings of ECTEL 2009, Nice, France, pp 73–87 Lindstaedt SN, Ley T, Scheir P, Ulbrich A (2008) Applying scruffy methods to enable workintegrated learning. Upgrade Eur J Inform Prof 9(3):44–50 Rath AS, Devaurs D, Lindstaedt SN (2009) UICO: an ontology-based user interaction context model for automatic task detection on the computer desktop. In: Workshop on context, information and ontologies, ESWC’09, 2009, Springer, Berlin and Heidelberg Rath AS, Devaurs D, Lindstaedt SN (2010) Studying the factors influencing automatic user task detection on the computer desktop. In: Sustaining TEL: from innovation to learning and practice, Proceedings of EC-TEL 2010 (Lecture Notes in Computer Science), vol 6383. Springer, Barcelona, Spain, pp 292–307 Resnik P (1999) Semantic Similarity in a Taxonomy: An Information-Based Measure and its Application to Problems of Ambiguity in Natural Language, Volume 11, pages 95–130

14

Context-Aware Recommendation for Work-Integrated Learning

301

Scheir P, Lindstaedt SN, Ghidini C (2008) A network model approach to retrieval in the Semantic Web. Int J Semantic Web Inform Syst 4(4):56–84 Schugurensky D (2010) The forms of informal learning: towards a conceptualization of the field. http://hdl.handle.net/1807/2733. Retrieved 10 July 2010 Stern H, Kaiser R, Hofmair P, Kraker P, Lindstaedt SN, Scheir P (2010) Content recommendation in APOSDLE using the associative network. J Univ Comput Sci 16(16):2214–2231 Strang T, Linnhoff-Popien C (2004) A context modeling survey. In: Workshop on advanced context modelling, reasoning and management, UbiComp’04, Nottingham, 2004 Wall TD, Jackson PR, Davids K (1992) Operator work design and robotics system performance: a serendipitous field study. J Appl Psychol 77:353–362 Witten IH, Frank E (2005) Data mining: practical machine learning tools and techniques, 2nd edn. Morgan Kaufmann, San Francisco Wolpers M, Najjar J, Verbert K, Duval E (2007) Actual usage: the attention metadata approach. Educ Technol Soc 10(3):106–121

15

Evolving Metaphors for Managing and Interacting with Digital Information Natasa Milic-Frayling and Rachel Jones

15.1

Introduction

We are in the midst of the digital revolution which permeates all the areas of human endeavour. From the information management point of view, digital content is the most ephemeral of all the media that we have historically used to store and transfer information. Digital documents can be replicated easily and shared at unprecedented speeds. They can be aggregated, augmented, and transformed to generate new value. Yet, digital media exhibits vulnerabilities that require special attention by the users and designers of digital systems. Indeed, digital media depends on a dedicated infrastructure to sustain its existence, access, and consumption. One dominant aspect is the need to store the digital content for reuse. Many usage scenarios rely upon persisting digital content while it is being authored or when viewed and organized for subsequent use. Thus, it is not surprising that the management of content storage has been an important part of the user’s interaction with the information systems. It has distinctly shaped the design of applications and played a significant role in defining the information management paradigms. As the users move from the traditional Desktop environment to Internet services we see increased reliance upon services to secure the persistent data storage, even in the case of the user’s personal content, e.g., Flickr (www.flickr.com) stores and organization of photo albums. Similarly, authoring and publishing of digital information have changed with the wide adoption of the Web. From two distinct functions they morphed to a more unified activity, with the focus on efficiency of on-line publishing and communication. The traditional metaphors of documents and database records have been

N. Milic-Frayling (*) Microsoft Research Ltd, 7 J J Thomson Avenue, Cambridge, United Kingdom e-mail: [email protected] R. Jones Instrata Ltd, 12 Warkworth Street, Cambridge, United Kingdom e-mail: [email protected] P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5_15, # Springer-Verlag Berlin Heidelberg 2011

303

304

N. Milic-Frayling and R. Jones

complemented by hypertext and content streams. Indeed, wikis, blogs, and microblogging services have emerged as self-sufficient authoring and publishing environments that produce distinctly different information formats. The wikis expand by growing the number of interconnected wiki pages and enforce access and editing control to coordinate collective authoring. The blogs provide a simple linear structure and support threaded conversations, similar to those in forums and online discussions groups. While new authoring environments come with less flexibility in organizing and reusing information, they are optimized for social interaction, communication, and broad exposure. The design of services and user experience are shaped by the continuous influx of information through content streams, ranging from email and instant message threads to RSS feeds and dynamic Web pages (Milic-Frayling et al. 2002; Fetterly et al. 2003; Teevan et al. 2009). That is particularly apparent with the micro-blogs like Twitter (www.twitter.com), designed for live broadcast of information snippets that spread through pre-defined types of social interaction such as retweets and the follower relationship among participants. Finally, the means of accessing information have also been affected by the paradigm shift. Substantial information influx through email and Web services has impact on the user practices, putting a significant strain on the manual filing of content. Indeed, the filing and classifying paradigm has caved under the volume of information and gave way to search and, more recently, a light-weight tagging of the user generated content with keywords that are then exposed through tag clouds for content browsing (Cutrell et al. 2006; Dumais et al. 2003; Jones et al. 2001). As we continue to embark on another computing paradigm, the data storage and computation in the cloud, the information management models and practices are being redefined once again. The storage and computational infrastructure have become a commodity that can be “hired” as required. The content is now resident in the data centres that can optimize data processing and facilitate integration with related content repositories and services. This will have implications for the ways enterprises manage and leverage their information assets in the new environment. At the moment, much of the content management in the cloud is based on the previous generation software and new applications and practices are still to evolve. How will one reconcile the existing data stores and user practices with the emerging digital environments that are abundant with services, data repositories, and social engagement? What should be the principles of managing and interacting with information and data? We explore some of these issues by reflecting upon the user experience and practices in the early days of Internet penetration and integration with the Desktop environment. We anchor our discussion around the findings of a user observation study that we conducted in 2004. The study highlights the changes in processes and practices that the users developed to interact with digital content, from authoring, storage, and viewing to organizing and sharing information. This led to the consideration of user activities as a driver for information management (Bardram et al. 2006). That approach is particularly amenable to connecting the Desktop with the Web environment and services in the cloud. We discuss the metaphors of collections and compositions that allow for gathering information across

15

Evolving Metaphors for Managing and Interacting with Digital Information

305

distributed information repositories and support both rich representations of context and effective access to the collected resources (Oleksik et al. 2009; Kerne et al. 2008). In essence, we take the Web hypertext model to another level by supporting integrated content and activity spaces. In the following sections we discuss the paradigm shifts and evolving metaphors for information management through examples of user practices observed in two studies. We conclude by reflecting upon future directions.

15.2

Information Management Processes

Information management systems are designed to facilitate interaction with information resources. Their characteristics impact the efficiency with which information workers are able to accomplish their everyday tasks. At the same time, the digital environments in which information is created and exchanged are evolving continuously. The self-contained and well defined desktop paradigm has been challenged by the new opportunities for acquiring information through the desktop connectivity to the Internet. Similarly, new ways of communication have emerged, ranging from synchronous messaging via Instant Messenger and voice over IP to discussions in community forums, blogs, and most recently social media sites (LinkedIn, Facebook, etc.). This increased exposure to information and services makes new demands on the user’s engagement with technology in terms of the complexity and variety of tasks that need to be accomplished. At the same time, the applications and tools that are supposed to provide support for their work remain disconnected and inflexible. We shall reflect upon the emergence of these issues by discussing an early study of the Web enabled desktop environment. Back in 2004 we observed a dynamic, fast-paced work place and had a chance to see how the change has impacted the workers. The task overload and the increased volume of received and produced data were apparent. That led to frequent breakdowns in the use of existing applications. The users continued to push the boundaries of the available facilities in order to handle fast changing and demanding situations. Yet, they were experiencing difficulties. We analysed the sources of their inefficiencies and reported the detailed findings in (Milic-Frayling et al. 2006). Here we reflect on selected aspects that are relevant to our discussion of the changing information management practices.

15.2.1 In-Situ Observations of Information Workers’ Practices In October 2004 we gained access to a workplace at a leading international public relations firm and conducted in-situ observations of nine employees over a period of 8 days. In selecting the participants, we made a conscious decision to improve on previous studies that looked at individual workers in isolation. We chose a group of co-workers whose activities were rather intricately interwoven. They were

306

N. Milic-Frayling and R. Jones

collocated within an open plan, with their desks put together in an elongated area. Sitting across each other, separated only by the personal computers, they could easily collaborate on projects and assist each other with individual tasks. In their work they used Microsoft desktop applications, including Instant Messenger, MS Internet Explorer, MS Excel, MS Word, MS PowerPoint, and MS Outlook. In order to get a broader view and investigate both offline and online information and communication activities, we applied a hybrid method described by (Jones et al. 2007). We combined complementary methods: repeated interviews with the participants, on-site observations, and activity logging, and analyzed these three sources of information in concert to gain deeper insights. The researcher who conducted the observations spent 8 days on site. She was provided with a desk in the proximity of the participants. That enabled her to observe the activities continuously and approach an individual or a group when she judged important for the study. She recorded the activities unobtrusively using a portable video camera and made a conscious effort to minimize the impact on the participants. By installing the logging software on the individual participant’s machine, we continuously captured the application level events that resulted from the user’s interaction with the Windows computing environment. The logging software also captured screenshots of the desktop displays every 5 min. Synchronized with the rest of the data, this visual aid proved invaluable for viewing and interpreting the log data. Through integrated data analysis we arrived at rich profiles of participants’ practices (Milic-Frayling et al. 2006). Here we discuss in more details the emerging workflows, multi-tasking, and interruptions that the participants dealt with and the rise of communication media as an important factor in shaping information management practices.

15.2.1.1

Workflow and Task Management

Most of the participants maintained paper or electronic to-do lists to keep track of their work plans. However, our observations revealed that their typical workflows were sensitive to various triggers and required flexibility and re-adjusting of plans according to the emerging circumstances. Indeed, the participants worked in teams, on tasks with multiple overlapping activities. They were responsible for press releases, briefing clients before media interviews, and preparing information packs for other agencies that were dealing with their clients. Their business required them to be informed of any media that mentioned or affected their clients and to respond to new information and new developments as they occur. They employed RSS news services to help them stay abreast of the happenings. The main such service, NewsNow, delivered news via email. They also subscribed to services like Media Disk and Factiva to access information about local agencies and monitored alternative news sites where news sometimes breaks out first, such as the Recorder site. Essentially, they checked their email continuously, either for news or for information requests from agencies, media contacts, and clients.

15

Evolving Metaphors for Managing and Interacting with Digital Information

307

Fig. 15.1 The workflow diagram shows the task trigger and the “task loop” with typical activities that involve locating, communicating, authoring, and filing information

In Fig. 15.1 we depicted a typical task workflow. A task begins with a trigger event, a request from a colleague or client, or a personal reminder that prompts about a planned activity. The participants would first try to locate relevant information and then continue with authoring or communication. During this process they may consult or collaborate with other colleagues by exchanging information electronically or faceto-face, sitting next to a person or seeking advice by conversing across the desk. The tasks normally required focus and concentration. Dealing with interruptions was one of the apparent challenges and they used various methods to keep track of multiple tasks and respond to changes. Furthermore, the tasks required multiple desktop applications and the participants were constantly switching between them in their work. While this was a persistent phenomenon it did exhibit highly variable patterns, even for the same individual. This is apparent from the time log analysis in Fig. 15.2, showing the patterns of switching between different application windows on three different days for the same participant. We indicate explicitly the three major categories of activities: authoring, searching and browsing, and communicating via email. The dark lines and boxes in the timelines (Fig. 15.2) show the periods that the user spent switching between application windows, without remaining in any one for 5 s or more. Some of the observed patterns can be traced to specific characteristics of the desktop user interface. For example, the participants maintained high awareness of the applications that were open and frequently switched between them. Still, they often confused the documents with one another and would maximize the wrong window. The tabs on the MS Windows taskbar were the primary means of accessing documents and applications that were open. However, the tabs truncated the visible file information and thus provided suboptimal support. We also observed that participants managed email by opening each message in a separate window and deleting unimportant ones within few seconds. Thus, it is not surprising that dark areas, corresponding to many reviewed email messages, are adjacent to the longer intervals of communication that involved writing emails for sustained periods of time. The analysis of user logs also showed switching between different applications (Fig. 15.3). Tasks like preparation of press releases, interview briefings, and

308

N. Milic-Frayling and R. Jones

17:42:45

15:22:24

15:00:16

17:24:15 17:05:52

16:57:15 16:44:00

14:07:47 13:09:55

13:53:44 13:40:04

13:00:38 12:47:08

13:26:14 12:49:11

12:32:32 11:35:37

11:32:01 11:21:54

15:03:55 12:21:24 09:46:43 09:36:28

11:44:15 11:41:27

08:14:53

08:06:04 15-Oct

Communication Authoring Browse/Search Other Idle

20-Oct

26-Oct

Fig. 15.2 Beth’s time log for three separate days. The logged activities are identified in the key. The black boxes indicate periods in which all applications were viewed for less than 5 s. Published with permission from (Milic-Frayling et al. 2006)

15

Evolving Metaphors for Managing and Interacting with Digital Information

309

Fig. 15.3 Aggregate statistics across participants show the typical time breakdown across desktop applications and implied task types on a typical work day

information packs required the use of MS Word, MS Outlook, MS Excel, IE, and MS PowerPoint together. Since these applications are disconnected and optimized for work on a specific type of documents, the participants experienced many problems when trying to use them in concert and move content between them. Often they would compose a document in MS Word and then export it to MS Outlook to find that fonts have changed, bullet points had moved, and spacing was irregular. Some of the participants’ practices were shaped by the customers’ demands. For example, some customers avoided email attachments and expected information to be included in the body of the email message. That meant either using email as the main authoring environment or moving content from MS Word and MS Power Point documents into the email message.

15.2.1.2

Impact of Communication on Content Storage and Organization

The predominant use of email as communication media had ripple effects not only on authoring practices but equally so on the storage and organization of project and customer related information (Fig. 15.3). Incoming emails were prioritized and often time-stamped by moving into the Outlook calendar. Once read and dealt with, important messages were filed and kept as accountable records, especially regarding communication with clients or journalists. The participants often filed emails into folders named after clients. This expanded role of email resonated well with the notion of email as a habitat by (Ducheneaut and Bellotti 2001) and observations by (Mackay 1988).

310

N. Milic-Frayling and R. Jones

A female participant took a lead in filing and organizing information for the group. If email arrived from someone new, she would set up a new folder. Her colleagues often asked her for the location of information they were looking for. The team primarily used the folder system within MS Outlook but also filed emails on the shared network \G: drive, especially those that were needed by other team members. Participants frequently “lost” documents and emails, and spent time looking for them across Outlook folders, personal network drives, and the shared drive. They searched Outlook by a sender or by using the “advanced search” feature. This was often a frustrating experience: “Outlook searches against names and sometimes keywords, but never by dates. It would be good if search could break out the results by months rather than just a long list.” In many instances, the information was embedded in received and sent emails that were carefully archived in network folders. However, the context of an attached document or email was lost once removed from Outlook and placed on a local or a shared drive. There it was not possible to search on all the email attributes: “It is not as easy to search on the H (personal network) drive as it is in Outlook. Explorer does not recognize names, just keywords in files. No option to search by asking who did you get it from or who sent it to you.” Indeed, our study pre-dated the desktop search releases by Google and Microsoft. Google delivered this feature in the form of a plug-in associated with the Web browser toolbar. Previous research did show the importance of search as a unifying access medium across application data silos (Dumais et al. 2003).

15.2.2 Changing Information Management Metaphors Dynamic, fast-paced environments, such as the one we observed, are becoming more commonplace (Gonzalez and Mark 2004). The workers have to accommodate emergent activities and work reactively when needed. They are required to accomplish multiple tasks in parallel, despite the constant interruptions. As the study revealed, their experience is affected by several distinct issues: • Increased rate of acquiring and handling information leads to higher demands for multi-tasking and micro-switching between applications • Information silos created by desktop applications hinder the user tasks that involve multiple applications and services • Communication media, like email, is emerging as a unifying function that includes and contextualizes digital artifacts but lacks appropriate access and archiving support. Over the years, researchers have proposed alternatives to the traditional PC desktop metaphor and designed tools to address similar information management issues. (Kaptelinin 2003) provides a comprehensive review of proposed models and tools. Among them are attempts to create dedicated project spaces, such as Rooms (Henderson and Card 1986), Task Gallery (Robertson et al. 2000), Manufaktur, Kumira, and similar. Well aligned with our observations are recommendations to

15

Evolving Metaphors for Managing and Interacting with Digital Information

311

create communication based work environments such as the Taskmaster and ContactMap. These approaches either imposed a significant overhead onto the workers’ time or excluded important work scenarios. Systems like Lifestreams, Presto, MIT Semantic File System, and MIT Haystack attempted to remove the overhead of maintaining the hierarchical organization of the file system but had limited success. By relying on search and filtering, the users had to define formal criteria to select relevant information and that has proven to be difficult in general. In search of appropriate metaphors to support the user across the evolving paradigms, from desktop and Internet to cloud and multi-device computing, we consider two important aspects: the shift from storage management to content organization and the benefit of activity focus management of information to capture a rich usage context.

15.2.2.1

Content Storage and Organization

Considering the use of Web based authoring, e.g., through blogs, forums, online wikis, and social sites like Facebook and Flickr, we observe a separation between storing and organizing the content. The storage is tightly coupled with the Web application and hidden from the author. Thus, the user is mainly focussed on organizing information through the facilities provided in the user interface. Organizing content across Web services is accomplished through the Internet browser bookmarks that include URL references to the content. Instead of managing the digital artefacts themselves, the users are organizing resource links that are resolved through the Internet services in order to present the content upon the user request. Within the desktop environment, the separation of storage and content organization can be observed in the design of applications such as MS OneNote that is based on the notebook metaphor. The storage of individual OneNote pages and files embedded in the pages is not transparent. Yet, the user can organize information in a variety of ways. Storage and organization of the content are completely enclosed within the single application interface. We also note that user activities in forums, discussion groups, Facebook, and Twitter tightly integrate publishing and authoring and emphasize instant exposure of the content. This is facilitated by constraining the user interaction and content format to a predefined organizational structure. By supplying templates that determine organization and interaction, these services redirect the focus from content storage and organization to the information broadcast.

15.2.2.2

Application and Activity Management

User interaction with digital information comprises authoring, storing, viewing, organizing, and sharing content through communication and publishing media. Optimization of these functions within and across applications directly impacts the user experience and the outcome of the user activities.

312

N. Milic-Frayling and R. Jones

Furthermore, from the study we observed that email, as a content rich communication medium, captured resources related to the user tasks and provided valuable context for embedded documents. Generalizing this principle, we anticipate that mechanisms for capturing association of resources based on user activities would be beneficial. Refocusing information organization towards activities rather than software applications has been proposed back in 1983 by (Bannon et al. 1983). However, that has to be approached carefully. Resorting to the workspace metaphor and clearly delineating individual activities may cause problems with activity switching, similar to those observed with application switching. Furthermore, user activities may be transient, dynamic, or not yet completely formed (Bardram et al. 2006; Kaptelinin 2003).Thus, the user may have difficulty pre-defining their activities. The same problem was observed in the organization of applications and documents into “working spheres” suggested by (Gonzalez and Mark 2004; Mark et al. 2005). Persisting the activity state is likely to help with interruptions that disrupt the planned workflow and often originate from communication. Czerwinski et al. (2000) looked at the implications of IM for interruptions in task management. In the diary study (Czerwinski et al. 2004) analyze the requirements for tools to aid with the recovery from interruptions and developed the GroupBar tool (Smith et al. 2003) that enables the user to organize application windows in sets that can be easily folded or evoked to switch from one task to another.

15.2.2.3

Unified User Experience

Considering the interconnection of authoring, storing, viewing, organizing, and sharing digital content, one is presented with a dilemma whether to • Support all or most of these phases in each application • Provide a meta-layer that enables interconnection of applications and leverage complementary functions across them. Reflecting upon the work that has been done so far, we see several trends. (Bellotti et al. 2003) implemented the Taskmaster, a system designed for tight integration of email, task, and project management. They introduced thrasks— threaded task-centered collections of items and aggregated rich metadata about the task related content. (Boardman and Sasse 2004) suggested to look at a broader spectrum of user activities to understand the benefits of alternative design strategies. They contrast the Taskmaster approach with the approach taken in (Isaacs et al. 2002) and (Kaptelinin 2003). There the design involves a consolidated interface that unifies interaction across the tools. In the Stuff I’ve Seen system by (Dumais et al. 2003) this is accomplished through the unified search interface. In UMEA (User-Monitoring Environment for Activities) by (Kaptelinin 2003) the system provides a project centered overview of the information space with integrated user monitoring function and user data. With these insights, we decide to explore a hybrid approach. We designed a unifying tagging facility for gathering activity related resources across desktop

15

Evolving Metaphors for Managing and Interacting with Digital Information

313

applications and on-line services. At the same time, we extended each application with the activity management features that enable task switching and micro-switching from the context of the current application. We essentially move towards the metaphor of virtual collections where light-weight tagging is a mechanism for collecting relevant content from remote or local repositories, in the context of the user work.

15.3

Supporting Activities in Dynamic Work Environments

The user’s perspective and objectives evolve over time and that is reflected in the reuse of existing documents or creation of new ones. A collection of digital resources used at a given time represents a stage in the user’s activity and offer a valuable context. In order to capture these stages, we implemented a TAGtivity prototype that enables light-weight tagging of resources relevant to the user work including local and remote documents, email messages, Web pages and storage locations such as folders, services, and databases (Oleksik et al. 2009). Labelling of resources can be done at the desktop level and within individual applications to enable tagging and micro-switching without leaving the current application context. A similar approach has been taken by (Voida et al. 2008), with the Giornata system, and promoted through the Placeless Documents project and the resulting Presto system (Dourish et al. 1999). With Giornata, the user can operate in multiple virtual desktops and separate resources associated with distinct activities. Any file accessed within a specific desktop is automatically linked to the corresponding desktop tag. One can also assign tags to individual files but that was designed as a less accessible feature, through the file property settings. Presto, on the other hand, allowed users to specify and apply attributes to individual documents and use them to retrieve, index, and organize documents for specific tasks. While the users could browse and further tag the resulting collections through a purposefully designed Vista browser, the tagging facility was not closely integrated with the desktop applications and the user’s workflow. We have learnt from these systems and based the TAGtivity prototype on two essential design principles: 1. A user activity is represented as a set of references and metadata rather than the document files themselves, and 2. Document tagging is light-weight, based on the user generated labels. That reduces the overhead of maintaining a strictly controlled vocabulary of tags and maximizes the flexibility of use. We deployed the TAGtivity in a natural user setting and observed the use of tagging over time. We analyzed the emerging usage patterns and the principles of organizing information that the users applied. The details of the study and the results are reported in (Oleksik et al. 2009). Here we discuss the findings that are pertinent to our reflections on the changing desktop metaphor. In particular, we demonstrate the use of references to create logical organization of distributed

314

N. Milic-Frayling and R. Jones

and heterogeneous resources that complement the file system organization. We also point to the affordances of tagging that help with the issues identified in Sect. 15.2: the management of dynamic content streams and the increased demand for multi-tasking and attentiveness to emerging tasks.

15.3.1 TAGtivity Features The TAGtivity prototype consists of two UI components, the TAGtivity Manager implemented as a deskbar and the TAGtivity Toolbar associated with individual applications. They both enable the users to assign existing tags to resources or create a new tag as needed. The prototype is compatible with Microsoft Windows 7, Vista and XP operating systems, and the Microsoft Office 2007 suite. In addition to the MS office documents, one can tag a broad range of document types by using a drag-and-drop facility to associate them with the activity. Figure 15.4 shows the TAGtivity deskbar that includes the TAGtivity Manager (TM), a centralized place where users can manage tags and access their activities and resources. The TM displays a list of the user’s tags in a selected order: alphabetically, by recency of use, or by the number of associated resources. One can access a resource by clicking on the title. The reference to the resource file is resolved via a database that stores the association of tag labels and corresponding files or locations. The file or location is then opened in the corresponding software application. The text box at the top of the list allows the user to access a specific tag or to create a new one. By typing text into the text box, the list of tags is filtered to show only matching tags. If the keyword is not found in the list, the user can choose to

Fig. 15.4 TAGtivity Manager comprising the list of user tags, tagged resources, and thumbnail previews with metadata about each item

15

Evolving Metaphors for Managing and Interacting with Digital Information

315

Fig. 15.5 TAGtivity Toolbar for Microsoft PowerPoint, showing the set of tags associated with the document and the list of items associated with the specific tag “NodeXL Study – UMD.” The thumbnail of a specific item is display on mouse hover over the title

use it as a new tag. Once the tag is created or found, the user can drag and drop a resource onto the tag to create the association. We also designed and implemented a TAGtivity Toolbar as an extension of the main MS Office 2007 applications: Word, Excel, PowerPoint and Outlook, and Internet Explorer 7 (IE7) (Fig. 15.5). Within the IE7 browser, each browser tab is handled independently. TAGtivity Toolbars are located at the bottom of each application window. Similarly to the TAGtivity Manager, the toolbar also provides a text box for the user to type in keywords and find existing tags or create new ones. The user can attach a tag to the current resource by selecting a tag from the list or by typing a new one into the text box. One important aspects of TAGtivity is the integration with the file system. TAGtivity enables the user to associate files and folders with tags. The user can simply drag and drop a folder onto the tag and confirm whether to associate individual files with the tag or the folder as a whole. In the former case, all the files from the folder are added to the activity list and can be accessed independently. In the latter case, the folder location is added to the list and the user can access the folder content through the file system hierarchy presented in the Windows Explorer. Furthermore, the user can “export” a tag. The TAGtivity application would create a tag folder within the File System containing the links to resources and metadata about files associated with the tag. The metadata typically includes the title, the author, the storage location, and a thumbnail image of the application

316

N. Milic-Frayling and R. Jones

displaying the file or location. If desired, the export function can create a copy of all the associated files, thus providing the archiving support for the past activities.

15.3.2 TAGtivity User Study We observed the use of the TAGtivity prototype by 16 participants over the period of 3 weeks (Oleksik et al. 2009). The participants included four employees of a small software development company, seven research interns, three full-time research scientists, one intern with a legal department, one independent market researcher, and one small business owner. Participants were aged between 20 and 60, 14 male and 2 female. For their participation, they were compensated with computer software or hardware accessories at the end of the study. During the study we conducted four interviews with each participant, first to capture information about the existing data management practices and then to learn about their use of TAGtivity over time. We recorded and transcribed the interviews and analysed TAGtivity logs to study the relationship between the tags and the projects, tasks, and activities that the users conducted during the time of the study. This revealed that: • Tagging extends the file system function by providing additional views or logical organization of the content in the file system organization. • With tags, the users can capture ephemeral information that would otherwise be unrecorded since the users would not create a folder to hold it. • Tagging supports activity management. It helps with collecting resources related to a task, enables flexible switching between tasks, and allows association of the same resource across multiple tasks. A detailed study report is provided in (Oleksik et al. 2009). Here we outline several aspects that are of interest to our discussion of the changing paradigms and metaphors. The tags were used for the management of ephemeral information, as assistance for time saving, planning and emerging activities, and for reorganizing and repurposing content across tasks through alterative logical grouping of the data. These aspects are directly relevant to the heightened demand on the responsiveness and multi-tasking that the users are exposed to, as observed in Sect. 15.2. In the extended PC environment, the relatively stable organization of files and folder has been replaced by a new metaphor, the flow of information. Diverse content streams have penetrated the PC environment through the Internet browser, email, and RSS feeds and require support for capturing, organizing, and revisiting relevant content. Similarly, increased communication triggers new tasks and require support for planning of activities. From the interviews we found, for example, that tags offered the means of lowoverhead planning and time saving:

15

Evolving Metaphors for Managing and Interacting with Digital Information

317

• Place holding. Eleven users created tags as place holders for future activities. For example, one of the participants created a tag to gather interesting papers and online links related to robotics. However, he did not add any items to the tag until a week later. In this instance, the tag was created in view of the user’s anticipation to find relevant resources at some future point. • New project. Eleven users created a tag at the beginning of a new project. Unlike place holding tags, these were created with the intention to label relevant documents right away. • Time saving. Ten users created a tag to mark resources that were difficult to find. This was often the case with documents found through search and browsing. By bookmarking the item using a tag, the users circumvented the need to engage in the same process again. Furthermore, the tags were used for information gathering across desktop and online services, normally not well supported by the standard desktop facilities. They enabled groupings of heterogeneous resources that could not have been put together through a single application, i.e., the file browser or the Internet browser. During the study 742 resources were tagged and 608 were accessed through the TAGtivity user interfaces. They covered a broad range of tagged resources, including 157 email messages, 98 Web pages, and 174 Word or PDF documents. This confirmed the important property of the tags as a unifying mechanism for accessing resources across data silos and capturing relevant information from email streams. Finally, the tags provided a unique advantage over the existing, more static and permanent filing metaphor. By convenient capture of references to relevant content, they supported short term, transient, and emerging activities and enabled meta-organization of resources needed in the user’s tasks. Indeed, TAGtivity was found effective for managing short term tasks and early stages of longer term activities. This was observed with 12 users. Tags enabled them to collect and associate resources before a task was well formulated. The tag names could be easily modified as the task progresses. For short term tasks, TAGtivity helped to manage resources up to the task completion, at which point the tag would be removed if the resources were not deemed relevant any more. Generally, the tags were kept and left traces of transient activities that would normally not warrant creation of a file or a bookmark folder. TAGtivity was also used to create alternative views, i.e., logical organizations of the content in the file system or other data stores. One of the participants, who conducts market research for various customers, stated that the TAGtivity enabled alternative ways to “organize my files without creating them [folders]; so it helped me group them based on my processes and my needs.”

15.3.3 Discussion The study of TAGtivity revealed that simple desktop tagging can provide significant benefits. Participants often commented on the ease and low overhead of creating tags.

318

N. Milic-Frayling and R. Jones

This perception made tagging attractive even for the most transient activities. It enabled the creation of collections that could be easily dispersed when not further needed. Indeed, since tags only reference the content, deleting a tag is low risk, almost non-consequential. This fine interplay between the persistent file storage and the tags supports a rich set of new practices and enable transient user needs and early-stage information management. While TAGtivity is not an activity management application in the sense of (Smith et al. 2003), (Boardman and Sasse 2004) and (Bardram et al. 2006), it has proven to support users in performing their everyday tasks. By enabling tagging from within applications, it supports multi-tasking. The users can tag the document with multiple tags and easily access related resources without changing the current context. This also helped with interruptions since the user can capture resources of an emerging task without shifting the focus of their work. Finally, through tagging the users brought together and made easily accessible the content that was otherwise buried in the application specific data stores, like email exchange, or the file system hierarchy. The visibility of tags and tagged resources had raised the awareness and served as a reminder of activities that required attention. Through the observed practices and feedback from the users, we gained valuable insights about the very essence of tagging, i.e., the use of references to create associations among digital objects. The importance of the “broken” references and the access control became apparent. If tagging were to be adopted broadly, it would need to be supported by extensions of the file system with a notification mechanism for tracking changes in the file status such as deletion or movement to another storage location. With regards to the access control, the tagged items currently inherit it from the file management system. In the future, this can be reversed by enabling the users to specify access properties at the tag level and have them propagated to the file and folders of the tagged resources. Finally, sharing of tagged resource collections and reuse of tags by multiple individuals opens up a host of additional design considerations. For example,(Mendes Rodrigues et al. 2008) outline practices that evolve around social of user-generated content in online communities. In summary, activity management as a principle of organizing information and tagging as a supporting mechanism facilitate an important shift from content to activity management. They form important building blocks for the emerging computing paradigm, the computational cloud with distributed data and services and multi-device personal computing. We reflect on these in the following section.

15.4

Glimpse into the Future

As our studies have shown, through the Web enabled desktop environment individuals are accessing information and media from distributed data repositories and services. The use of the Web has caused a significant shift in their practices, placing more emphasis on publishing and consuming the content. For that reason,

15

Evolving Metaphors for Managing and Interacting with Digital Information

319

the notions of the document location and access control have not been central to the design of information management support on the Web. Indeed, the document location is important only insofar as the document URL ensures a repeated access. Thus, the use of bookmarks and search engines to revisit documents has been the primary means of accessing and managing Web information by the user. With regards to content authoring, Web blogs and discussion posts are facilitated by a simplified authoring environment and a limited control over the content storage and organization. On the other hand, a broad adoption of Web mail services shaped the authoring experience through the features of email editors and introduced a new storage paradigm for personal information. Indeed, services like gmail (www.gmail. com) by Google (www.google.com), Yahoo! Mail by Yahoo! (www.yahoo.com), and Hotmail (www.hotmail.com) by Microsoft (www.microsoft.com) enabled a broad user community to create substantial repositories of emails and associated content. The observed transformation of email from the communication media into a context rich data store (Sect. 15.2) has now reached a broad adoption, primarily shaped by the archiving and content management capabilities of the Web mail services. Considering the continued expansion of personal computing environments with novel devices and new modes of accessing services, e.g., through mobile phone applets, a unified resource management will become essential for the optimal user experience. Providing an adequate user support will require new metaphors to guide the design of the information management models and features.

15.4.1 Metaphor Transformations In this section we reflect upon the new notions that are emerging and the role they are expected to play in shaping future information systems and practices.

15.4.1.1

From Folders to Collections of Distributed Resources

Broad adoption of Web and mobile platforms have highlighted issues with the user experience in the highly distributed, heterogeneous, and disconnected data stores. The TAGtivity study showed the benefit of abstracting the notions of files, folders, and bookmarks and introducing mechanisms for flexible content organizations based on references to digital objects. This points to collections of digital items as the fundamental element of the data organization, represented by the metadata that refers to the data files and their locations. Such collections arise in different contexts, assembled using various mechanisms from hand gestures on the multi-touch devices to tagging as demonstrated through TAGtivity.

320

15.4.1.2

N. Milic-Frayling and R. Jones

From Lists to Context Rich Views

In most content management systems, the basic organization structure of resources is a list, optimized for easy access through sorting and browsing. However, the lists provide limited support for capturing and describing relationship among individual resources in the collection or adding information about the collection itself. At the same time, it is often important to record the meaning and the purpose of the collected resources. Building on the TAGtivity model, we propose descriptive representations of the collections called resource maps (Fig. 15.6). Resource maps can be created automatically from the metadata captured during user interaction with the digital items. By importing desired content descriptors into an authoring or interactive environment, one can generate maps through established templates or allow the users to compose them manually. Once persisted, the maps provide a rich access mechanism to the collection items and become an integral part of the collection. The notions of the collections and the corresponding resource maps are important vehicles for creating knowledge in different contexts, from gathering and reflecting upon content during brain-storming to sharing knowledge through discussions and publishing.

Fig. 15.6 Creating visual representations of a distributed and heterogeneous collection of resources by tagging the resources, exporting the metadata into an authoring application and saving the map in a sharable format with active links to the resource files, Web pages, or services

15

Evolving Metaphors for Managing and Interacting with Digital Information

15.4.1.3

321

From Documents to Composite Information Constructs

In order to support a broader range of information needs, it is often necessary to relinquish the traditional boundaries of files and applications. The users organize information into compositions of digital information created by combining parts of documents rather than using collection of files. Indeed, knowledge is often conveyed by bringing together text passages, images, and media content that, in the new assembly, convey a meaning beyond individual parts. In summary, we suggest that the traditional file organization, database schemas, and hypertext forms can be further enhanced with the context-rich representations of digital collections in terms of resource maps and content compositions. These new representations capture the semantics and enable sharing and propagation of knowledge. At the same time they are connected with the resources and facilitate easy switch to detailed view of individual files. They become the essential means for browsing and reusing information from distributed information environments and services.

15.5

Concluding Remarks

In this chapter we reflected upon the evolution of information management practices over the past decade and extrapolated into the next era of information management in the computational cloud and across distributed data stores, services, and devices. Direct observations of users revealed issues with the support for content management, from authoring, storing, and viewing to publishing and sharing. These have been amplified by the transformation of the PC desktop through the connectivity to the Internet and the prolific use of Web services. Based on the related research and our own user studies, we hypothesize about the metaphors that are likely to shape content management in the cloud computing environment and across multiple personal computing devices. We promote an activity based approach in which the fundamental elements are collections of resources, including content locations and applications relevant for the user task. We demonstrate how such collections can be created through light-weight tagging. With low overhead and flexibility in creating, naming, and dispersing collections, this approach minimizes the disruption to the main user task. However, it is important to explore further the implications of managing and organizing potentially a large number of tagged collections and dealing with the complexities that arise from multiple contexts in which digital objects may be used. We here conclude with the mention of several key aspects that are likely to shape the future of content management and require further considerations. First, as more valuable information is stored in the digital form there is a need for its secured persistence over long periods of time. At the same time, we are moving away from static files towards “live” and dynamic documents. Second, a substantial

322

N. Milic-Frayling and R. Jones

amount of information is now generated through social media and various forms of crowdsourcing efforts. This trend will continue to shape the future content services and information management practices. Acknowledgments Prototypes and research studies described in this Chapter are conducted by the Integrated Systems Group at the Microsoft Research Lab in Cambridge, UK in collaboration with Instrata Ltd., Cambridge, UK. Special acknowledgments go to Yvonne Sanderson and Gerard Oleksik from Instrata Ltd. for their work on the user studies. Eduarda Mendes Rodrigues conducted quantitative analyses and, together with Gabriella Kazai and Annika Hupfeld worked on the design of the TAGtivity features. We particularly recognize the work by Gavin Smyth who is solely responsible for the implementation and deployment of TAGtivity software. The prototype is publicly released as the Microsoft Research Project Colletta http://research.microsoft.com/enus/um/cambridge/projects/ResearchDesktop/ProjectColletta.

References Bannon L, Cypher A, Greenspan S, Monty ML (1983) Evaluation and analysis of users’ activity organization. In: Proceedings of CHI 1983. ACM Press, New York, pp 54–57 Bardram JE, Bunde-Pedersen J, Soegaard M (2006) Support for activity-based computing in a personal computing operating system. In: Proceedings of CHI 2006. ACM Press, New York, pp 211–220 Bellotti V, Ducheneaut N, Howard M, Smith I (2003) Taking email to task: the design and evaluation of a task management centered email tool. In: Proceedings of CHI 2003. ACM Press, New York, pp 345–352 Boardman R, Sasse MA (2004) “Stuff goes in the Computer but it doesn’t come out”: a cross-tool study of personal information management. In: Proceedings of CHI 2004. ACM Press, New York, pp 583–590 Cutrell E, Robbins DC, Dumais S, Sarin R (2006) Fast, flexible filtering with phlat – personal search and organization made easy. In: Proceedings of CHI 2006. ACM Press, New York, pp 261–270 Czerwinski M, Cutrell E, Horvitz E (2000) Instant messaging and interruptions: influence of task type on performance. In: Proceedings of OZCHI 2000. ACM Press, New York, pp 356–361 Czerwinski M, Horvitz E, Wilhite S (2004) A diary study of task switching and interruptions. In: Proceedings of CHI 2004. ACM Press, New York, pp 175–182 Dourish P, Edwards K, LaMarca A, Salisbury M (1999) Presto: an experimental architecture for fluid interactive document space. ACM Trans Comput-Hum Inter 6(2):133–161 Ducheneaut N, Bellotti V (2001) E-mail as habitat: an exploration of embedded personal information management. Interactions 8(5):30–38 Dumais S, Cutrell E, Cadiz J, Jancke G, Sarin R, Robbins D (2003) Stuff I’ve seen: a system for personal information retrieval and re-use. In: Proceedings of SIGIR 2003. ACM Press, New York, pp 72–79 Fetterly D, Manasse M, Najork M, Wiener J (2003) A large-scale study of the evolution of web pages. WWW 2003, 669–678 Gonzalez VM, Mark G (2004) Constant, constant multi-tasking craziness: managing multiple working spheres. In: Proceedings of CHI 2004. ACM Press, New York, pp 113–120 Henderson DA, Card S (1986) Rooms: The use of multiple virtual workspaces to reduce space contention in a window-based graphical user interface. ACM Transactions on Graphics 5,3, 211–243

15

Evolving Metaphors for Managing and Interacting with Digital Information

323

Isaacs E, Walendowski A, Whittaker S, Schiano DJ, Kamm C (2002) The character, function, and styles of instant messaging in the workplace. In: Proceedings of CSCW’02. ACM Press, New York, pp 11–20 Jones WP, Bruce H, Dumais S (2001) Keeping found things found on the web. In: Proceedings of CIKM 2001. ACM Press: New York, pp 119–126 Jones R, Milic-Frayling N, Rodden K, Blackwell A (2007) Contextual method for the redesign of existing software products. Int J Hum Comp Interact 22(1–2) Kaptelinin V (2003) UMEA: translating interaction histories into project contexts. In: Proceedings of CHI 2003. ACM Press, New York, pp 353–360 Kerne A, Koh E, Smith SM, Webb A, Dworaczyk B (2008) CombinFormation: mixed-initiative composition of image and text surrogates promotes information discovery. ACM Trans Inf Syst 27(1):1–45, Article 5 Mackay WE (1988) More than Just a communication system: diversity in the use of electronic mail. In: Proceedings of CSCW 1988. ACM Press, New York, pp 26–28 Mark G, Gonzalez VM, Harris J (2005) No task left behind? Examining the nature of fragmented work. In: Proceedings of CHI 2005. ACM Press, New York, pp 321–330 Mendes Rodrigues E, Milic-Frayling N, Fortuna B (2008) Social tagging behaviour in communitydriven question answering. In: Proceedings of the 2008 IEEE/WIC/ACM International Conference on Web Intelligence, WI’08, IEEE 2008, Sydney, Australia, pp 112–119 Milic-Frayling N, Sommerer R, Tucker R (2002) MS WebScout: web navigation aid and personal web history explorer. Poster paper 170, WWW 2002 Milic-Frayling N, Jones R, Mendes Rodrigues E (2006) User study of interconnection among communication, authoring, and information management processes. Microsoft research technical report MSR-TR-2006-96 Oleksik G, Wilson ML, Tashman C, Mendes Rodrigues E, Kazai G, Smyth G, Milic-Frayling N, Jones R (2009) Lightweight tagging expands information and activity management practices. In: Proceedings of CHI 2009, ACM Press, New York, U.S., pp 279–288 Robertson G, van Dantzich M, Robbins D, Czerwinski M, Hinckley K, Risden K, Thiel D, Gorokhovsky V (2000) The task gallery: a 3-D window manager. In: Proceedings of CHI 2000. ACM Press, New York, pp 494–501 Smith G, Baudisch P, Robertson GG, Czerwinski M, Meyers B, Robbins D, Andrews D (2003) GroupBar: the taskBar evolved. In Proc. of the 2003 Australasian Computer-Human Conference, OzCHI 2003, S. Viller and P. Wyethh (eds), CHISIG 2003, Available on web at http:// www.ozchi.org/proceedings/2003/ozchi2003.pdf, Accessed date 15 Aug 2011, pp 34–43 Teevan J, Dumais ST, Liebling DJ, Hughes R (2009) Changing the way people view changes on the Web. In: UIST 2009. ACM Press, New York, pp 237–246 Voida S, Mynatt ED, Edwards WK (2008) Re-framing the desktop interface around the activities of knowledge work. In: Proceedings of UIST 2008. ACM Press, New York, pp 211–220

Part V

Conclusions

16

Conclusions Paul Warren, John Davies, and Elena Simperl

16.1

Introduction

We started this book by describing three challenges which we saw as important for increasing the efficiency and effectiveness of knowledge work: the failure to fully share knowledge in organisations, including knowledge about informal processes; the problem of information overload; and the disruptive effect of continual changes of task focus. These beliefs were confirmed by our work in the ACTIVE case studies, described in Part III of our book. We also started our book by talking about three technology areas which we thought were important in tackling these problems: the synergy of the informal approach of Web2.0 and a more formal approach to semantics based on the use of ontologies; the use of context to deliver information related to the user’s current task; and tools to support the informal processes which underlie how we undertake our daily work. ACTIVE’s work to develop these technologies has been described in Part II; the work in the case studies has also confirmed the importance of these technologies. Moreover, we found that others shared the same intuition about the problems of knowledge work and were investigating related technological solutions. Some of this work is described in Part IV of our book. In this chapter we briefly review these three technology areas, in each case looking at the likely trends for the future and indicating some research challenges.

P. Warren (*) Eurescom GmbH, Wieblinger Weg 19/4, D-69123 Heidelberg, Germany e-mail: [email protected] J. Davies British Telecommunications plc., Orion G/11, Ipswich, IP5 3RE, Adastral Park, United Kingdom e-mail: [email protected] E. Simperl Institute AIFB, Karlsruhe Institute of Technology (KIT), Berlin, Germany e-mail: [email protected] P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5_16, # Springer-Verlag Berlin Heidelberg 2011

327

328

16.2

P. Warren et al.

Web2.0 and Semantic Technologies

A prominent feature of Web 2.0 has been the popularity of wikis. Semantic wikis, representing a synergy of Web2.0 and semantic technology, are now an important topic. At recent conferences addressing the application of semantic technologies to industry, the use of semantic wikis has been a major theme. This theme was taken up in Chap. 3 which described work in ACTIVE to extend the use of the SMW. Complementing this, Chap. 12 described both how the concept of the SMW is being developed to make it more adapted for use in the enterprise and how the SMW is being used for enterprise process and application modelling. Another important aspect of Web2.0 is the use of tags to describe web-pages, photos and all forms of information objects, thereby creating folksonomies. Folksonomies can be contrasted with the ontologies of more formal semantics, or the semi-formal taxonomies frequently used in content management systems. Folksonomies are perceived as offering a lower barrier to use, in particular by occasional users. Chapter 15 describes a tagging system and users’ reaction to it. In ACTIVE we have supported the creation of folksonomies through the use of machine intelligence to make tag suggestions. Another way in which Web2.0 and more formal semantic technologies come together is through the use of algorithms for learning taxonomic or ontological structures from folksonomies. There has been significant work in this area. For example Heymann and Garcia-Molina (2006) have developed an algorithm which converts a tag cloud into a hierarchical taxonomy. The starting point is to create a tag vector for each tag, of dimensionality equal to the number of objects, and such that the component in each dimension is the number of times the tag has been applied to a particular object. From this, the cosine similarity between tag vectors is used to calculate the similarity between tags. These similarities are used by the algorithm to create a taxonomy. Hotho and J€aschke (2010) provide an overview of the state of the art in ontology learning from taxonomies, as of late 2010. A related theme is that of the social semantic desktop, discussed in Chap. 13. Here we saw how the semantic interpretation of available metadata could enrich the user’s experience. This approach requires neither the creation of formal, ontological metadata nor informal tags. Instead, it makes use of metadata available but normally not exploited. In the coming years we are likely to see these synergistic approaches between Web 2.0 and formal semantics being adopted more widely in the enterprise and also in personal applications on the WWW. Amongst the research questions which remain are: • What kind of informal semantic structures, and modes of presentation, are most natural to users? How does this vary between applications and types of users? • How far can we improve machine learning algorithms to create ontologies from user tagging? We have to bear in mind here that the quality of such an algorithm is in part subjective; what matters is the user’s perception of the improved experience made possible by the ontology

16

Conclusions

329

• To what extent could the use of tags replace the use of conventional hierarchical folders? Could this trend be encouraged by the automatic learning of ontological structures from tag classes? • To what extent does the notion of informal semantics, as implemented in the SMW, scale to the WWW? Could web page editors be encouraged to associate informal semantics with their hyperlinks, creating a kind of global SMW? Of course, the rel attribute in RDFa permits the association of semantics with hyperlinks, but this is in the world of formal semantics and requires a relatively sophisticated user. Can we create user interfaces which encourage the creation and use of vocabularies to describe web links and resources?

16.3

Context

We have already observed that context is a very broad concept, incorporating ideas such as location as well as the task focus which was central in ACTIVE. During the last decade of the previous century and the first decade of the current century there were a series of conferences devoted to modelling and using context. The most recent of these was held in 2007 (http://context-07.ruc.dk). A glance at the list of papers reveals the range of topics covered. One topic included was the use of ontologies. The joint themes of context and ontologies have been taken up in the CIAO workshop series on Context, Information And Ontologies; see http://ftp. informatik.rwth-aachen.de/Publications/CEUR-WS/Vol-626/ for the proceedings of the 2010 workshop. Outside of the research arena, the analysts Forrester (http://www.forrester.com) have highlighted the importance of context in information delivery. Rugullies et al. (2007) report on a survey which asked North American IT and business professionals about the importance of context. When asked “how important is it that content is delivered to users within the context of the business process in which they are involved?” 60% responded that it was ‘extremely important’ and 38% thought it was ‘somewhat important’. There was also considerable support for just-in-time eLearning. When the same people were asked “how important is it that eLearning is available at the point in time when the user needs it?” 32% thought it was ‘extremely important’ and 51% thought it ‘somewhat important’. This supports the importance of the work-integrated learning approach described in Chap. 14. Rugullies et al. also commented on the need to “provide context with a sufficient level of simplicity to make implementation practical while at the same time addressing the intent of the worker”. In ACTIVE, work on context integrated the explicit creation and manipulation of context by the user with the automatic creation and management of context using machine learning techniques. Chapter 5 described the former approach, depending on user intervention; whilst Chap. 7 described some of the algorithms used to automatically exploit context. In a world where people’s information needs change rapidly, as does their mode of interacting with information, context-based information delivery will remain

330

P. Warren et al.

high on the research agenda and will increasingly find its way into user applications. In this book we have outlined two complementary approaches. In ACTIVE we have combined a relatively simplistic approach to modelling context with the use of sophisticated machine-learning techniques. The approach described in Chap. 14 makes use of more sophisticated ontological modeling, besides also employing machine learning techniques. Each approach will be appropriate for different domains. However implemented, context is natural to the way people think and work and we are likely to see greater use of context, both within applications, e.g., eLearning as has been pioneered in APOSDLE; and for the general organization of information, as has been pioneered by ACTIVE. Two research themes stand out in their importance. On the one hand, algorithm research needs to continue, to provide high quality results; acknowledging that this quality is subjective and must be judged by its impact on the user experience. On the other hand, the overall user experience needs to be improved to increase its acceptability to the user. That means the user experience needs to be simple and natural, and oriented towards achieving the user’s work goals. Moreover, where machine learning is used to create recommendations, this must be done in a way which does not intrude on the user. However good the algorithms, the recommendations will not always be right, and false recommendations must be easily ignored. In an extreme approach the user might not need to be aware of context at all. Machine learning algorithms could make use of the concept of context to make recommendations to users, without users having an awareness of the context-related basis of those recommendations.

16.4

Informal Processes

The study of informal processes has come as much from the ethnographical community as from the technological, e.g., (Hill et al. 2006) which was referenced in Chap. 1 and also (Kogan and Muller 2006), both from the same issue of the IBM Systems Journal. The latter make some observations about the kind of tools required for what they call ‘personal work processes’. Chapter 15 also reported on observations by Microsoft researchers of people’s working practices and the workflows they used. Chapter 6 described the tools which ACTIVE has developed to assist in these personal work processes. Motivated by the role that email plays in most people’s working processes, there has been research to extract actions from incoming emails, e.g., (Sow et al. 2006) and (Tagg et al. 2009). Work in ACTIVE has taken a different but related direction. The project has developed Contextify (http://babaji.ijs.si/contextify/), an Outlook plug-in which provides contextual information about a selected email. For example, a sidebar displays information about the sender; a graphical display allows threads to be visualized; attachments in a particular thread can be easily identified; the social network of those displayed in a thread can be displayed; and recipients of an email can be suggested.

16

Conclusions

331

Supported by references to a number of pieces of field work, Kogan and Muller (2006) also contend that even where we expect people to be following a formal approach, actual practice often requires them to deviate from the prescribed process. The ProM framework (http://prom.win.tue.nl/tools/prom/) exists to enable an understanding of how business processes are actually executed. Several hundred plug-ins are available to allow learning and visualization of actual process flows. The informal processes which we have been concerned with in ACTIVE are more varied than business processes executing on a workflow engine. Chapter 6 has in part described ACTIVE’s response to the challenge this poses. Processes underlie all knowledge work, and understanding informal processes is crucial to improving the productivity of knowledge work. Hence process learning will remain an important topic. Algorithm development needs to continue; both algorithms to detect processes, and algorithms to understand the user’s information needs at each stage of a process. Here the user need not be seen in isolation; an open research question is how much can be learned from users as a group, and how much can be learned from one user and applied to another. Hill et al. (2006) identified the user as an integrator, frequently cutting and pasting between applications. Our current approach to knowledge work is application-centric; our information systems are a set of badly-communicating applications. The need for a different approach was recognized as long ago as the 1990, e.g., Kolojejchick et al. (1997) describe an information-centric paradigm for the user interface. The problem of implementation is not just technical, but has to do with the nature of a market which quite naturally offers a set of independent, often isolated applications. Given the importance of this problem to knowledge work, it is likely we will see innovative solutions in the coming years. The same authors also saw the need for applications to exchange semantic information. This is a theme taken up by the work on the social semantic desktop described in Chap. 13.

16.5

Final Words

The information landscape has changed in the years which have elapsed since ACTIVE, and the other initiatives described in this book, were conceived. The volume of information has increased, and this has only served to increase the problems we identified at the beginning of our work. The arrival of Linked Open Data, not just as a concept but as a reality, has expanded the potential offered by information on the internet. To achieve that potential we need even more to understand the user’s information needs in context; to use semantics, but in a way which is accessible; and to understand and exploit the users’ processes. So the challenges outlined in our book remain pertinent today. We believe the solutions we have described are pertinent also, and that in the coming years these solutions will be exploited and further developed to contribute significantly to increasing the effectiveness and efficiency of knowledge work.

332

P. Warren et al.

References Heymann P, Garcia-Molina H (2006) Collaborative creation of communal hierarchical taxonomies in social tagging systems. Technical report 2006-10, Stanford University http://ilpubs. stanford.edu:8090/775/, Accessed on 9 August 2011 Hill C, Yates R, Jones C, Kogan S (2006) Beyond predictable workflows: enhancing productivity in artful business processes. IBM Syst J 45(4):663–682 Hotho A, J€aschke R (2010) Ontology learning from Folksonomies. Tutorial at EKAW, Lisbon Kogan S, Muller M (2006) Ethnographic study of collaborative knowledge work. IBM Syst J 45(4):759–772 Kolojejchick J, Roth S, Lucas P (1997) Information appliances and tools: simplicity and power tradeoffs in the visage exploration environment. IEEE Comput Graph Appl 17(4):32–41 Rugullies E, Moore C, Markham R (2007) Context is king in the new world of work. Forrester Research Inc, Cambridge, MA, USA Sow D, David J, Ebling M, Misra A, Bergman L (2006) Uncovering the to-dos hidden in your in-box. IBM Syst J 45(4):739–757 Tagg R, Gandhi P, Raaj S (2009) Recognizing work priorities and tasks in incoming messages through personal ontologies supplemented by lexical clues. ECIS 2009 Proceedings, paper 163

Index

A Ability, 275 ACTIVE initial challenges, 4 scientific hypotheses, 5 technologies, 4, 325 ACTIVE knowledge work space (AKWS), 6, 7, 94, 154–155, 158, 161–167, 197 enterprise workspace, 154 local workspace, 154 management portal, 155 Microsoft applications, 154 Amazon, 13, 18, 19 AOL, 21 Aperture metadata extraction framework, 272 APOSDLE, 8, 250, 276–299, 328 Apple, Google, Microsoft, Nokia, Research in Motion, 23 ASBRU, 251 Assertional effects, 250, 252 Associative browsing, 260 Associative network, 286, 294, 295 Attention, 22 Authoring, 310

B Beacon, 21 Benefits, 62, 69–71, 73, 78, 84, 88 Bid proposals, 151, 155–161 Bid unit, 151, 155, 161, 162, 164–165, 168–169 Blippy.com, 21 BPMN, 245, 247, 249, 253 Business indicators, 222, 226 Business models, 13, 14, 16, 21

Business processes, 108 Business process re-engineering, 241

C Cadence Flow Infrastructure (CFI), 197 Cadence ProjectNavigator, 197 Case study Accenture, 7 BT, 7 Cadence Design Systems, 7 Challenges, domain of data management, 17 Civil society, 22 Classification of knowledge structures, 34 Cloud, 302 Collaboration, 215, 216, 219, 220, 222–226 Collaboration support, 118 Collaborative filtering, 18 Collaborative process development, 117–119 Collective action, 18 Collective intelligence, 17–20 Competencies, 276, 280, 287, 291–294 Computational cloud, 316 Context, 5, 6, 152, 259, 276–283, 286–294, 327–328 association, 163, 165, 168 detection, 5, 103, 154, 162, 163, 166, 167 discovery, 5, 154, 162–164, 166, 167 elicitation, 265, 267 for knowledge-sharing, 152 loss, 107 mining, 130, 133, 135–144 model, 288 ontology, 289 sensors, 289 visualizer, 116–117, 154 Context-aware applications, 24

P. Warren et al. (eds.), Context and Semantics for Knowledge Management, DOI 10.1007/978-3-642-19510-5, # Springer-Verlag Berlin Heidelberg 2011

333

334 Context-aware service delivery, 23 Contextify, 6, 136–138, 328 Context-rich representations, 319 Context-rich views, 317–318 Context-sensitive content (information), 17, 22–23 Context-specific mobile solutions, 23 Cooperation, 278, 280, 283, 284, 287–288 Co-ordination, civil society, 22 Costs, 62–79, 81–84 estimation, 79 model, 71, 73, 80, 81 Crowd-sourcing, 19

D Data representation, 128–129, 133–134 Descriptive learning guidance, 279, 298 Design environment, 277, 286, 299 Design Project Visualizer, 195 architecture, 196 back-end, 198–201 front-end, 202 validation, 203–209 Digital content, 310 Discovered contexts, 102 Discussion threads, 140 Domain and scope, 36 Domain of data management, challenges, 17 Dynamic data management, 23–24 Dynamic use contexts, 16, 17

E E-bay, 18 eLearning, 327, 328 Email, 135–144, 328 evolution of, 8 threads (see Discussion threads) time spent on, 3 Emerging activities, 314 Enterprise 2.0, 215, 220 Enterprise intelligence, 14 Enterprise knowledge processes, 12–15 Enterprise knowledge structures, 29–58 Enterprise modelling, 244 Enterprise search, 171–178 Ephemeral information, 314 Ethics, 21 Exploiting social, relational or intellectual capital, 21 Expressivity, 33

Index F Facebook, 18, 20, 21, 25 Facebook and Beacon, 21 Factbook, 152, 153 Field trials, 161–169 Flikr, 19 FOLCOM, 62, 70, 73, 76, 83, 85, 88, 89 Folksonomy, 19, 45 Formality, 34 Formal models, 34 Freebase, 52–54

G Gnowsis, 272 Google, 18, 21 Google Buzz, 22 Google, Facebook Amazon, 25 Granularity, 33 Graphics classification, 175

H Hidden Markov model, 197 HP/Palm, 23 Huffington post, 21

I IBM, 328 Identity management, 140–143 Incentives, 216, 225 Informal learning, 277 Informal models, 34 Informal processes, 5, 6, 224, 328, 329. See also Knowledge processes articulation and sharing, 193 knowledge representation, 191, 197 mining and extraction, 191–193, 198–201 visualization and discussion, 201–203 Information-centric paradigm, 329 Information economy, 12 Information integration, 40 Information management metaphors, 308–311 Information management models, 302 Information management paradigms, 301 Information overload, 107 Information quality, 40 Innovation, 216, 217, 219, 222, 224, 226 Intellectual property rights, 21 Interruptions, 304

Index K KDE Desktop Environment, 268–272 Kiva, 22 Knowledge base, 280, 284, 286, 292, 293 differentiation from information, 9 intensive tasks, 288, 290 work(er), 9, 108 work productivity, 275, 276 Knowledge indicating events (KIE), 291 Knowledge management, 171 environments, 13 Knowledge processes, 107–125, 189 management, 113–117 model, 198 optimisation, 120 Knowledge spheres, 122 ontology, 122–123 KnowMiner, 249

L Learning content, 287, 298 goals, 283, 287, 296, 299 guidance, 276, 277, 279–286, 296, 298, 299 need, 292 Light-weight tagging, 311 LiveNetLife, 197 Lock in, 20 Long tail effect, 14 Long-term user context, 276

M Machine learning, 127–144, 175, 187 supervised learning, 128 unsupervised learning, 128 Measures, 120 Metaphors, 302 Metrics, 120 Microsoft, 328 MIRROR, 251 Mobile telephones, 23 Mobilise, 22 Modeling paradigm, 33 Models of social enterprise, 22 MoKi, 8, 244–248, 250–252 Monetising collective intelligence, 21 Multi-device personal computing, 316 Multilingualism, 226 Multimedia, 226

335 Multi-relational clustering, 129 Multi-tasking, 304

N Named graphs, 262 Napster, 13, 19 Native resources, 263 Native structures, 263 NEPOMUK, 8, 255–272 NEPOMUK Annotation Ontology (NAO), 260 NEPOMUK architecture, 265–268 NEPOMUK Graph-Metadata Ontology, 260 NEPOMUK Information Element Ontologies (NIE), 260, 263–264 NEPOMUK Representational Language (NRL), 260, 261, 263 Netflix, 18 Network economy, 12–15 Network effects, 13, 20 Network forms of organising, 11, 12

O OceanTeacher Encyclopedia, 239 Offline working, 153–154 OntoBroker, 236 ONTOCOM, 62, 64, 70, 73–75, 77, 79–81, 83, 88, 89 Ontology, 61–89 questionnaire, 250, 252 OntoStudio, 242 Open innovation, 19 Open Semantic Collaboration Architecture Foundation (OSCAF), 272 Open source, 19 Organizing, 310 Orphaned concepts, 249 OWL, 245, 249, 252, 253 ontology, 286

P Participatory design, 276, 278–280 PC environment, 314 Peer-to-peer content sharing, 19 Peer-to-peer lending, 22 Personal information management, 289 Personal Information Model (PIMO), 256, 260, 263–265, 267 Personalized clusters, 179, 185

336 Personalized query, 281 Personal SEmantic Workbench (PSEW), 268–270, 272 Personas approach, 279 Positive returns, 18 Potential market, 219–226 Prediction, 131 Prescriptive learning guidance, 279, 298 Primitive events, 93 Privacy, 121–123, 225, 226 Process mining, 130, 132–135, 176, 177 Process recording, 152, 153 Project knowledge navigation, 194–196 ProM framework, 329 PSI suite of ontologies, 198 PSI Upper-Level Ontology, 198 Pure information businesses, 16

Q Quality issues, 54

R RDF. See Resource Description Framework (RDF) RDFa, 327 Recommendations, 276, 280–287, 291, 293 services, 276, 286, 288 Redaction, 179, 180 Refactoring and optimization, 119–121 Refactoring tool, 121 References, 316 Reflect, 283, 284 Repairing knowledge structures, 54–57 Representation language, 36–37 Requisite corporate competences, 14 Resource Description Framework (RDF), 245, 249 Resource maps, 318 Richness and reach, 15 RSS, 156, 158, 160, 162

S Search engine, 171–173, 175, 176, 184 Security, 121–123 policies, 122 Semantic data integration, 236, 241–243 Semantic desktop, 289

Index Semantic Email, 268 Semantic forms, 160, 232, 247 Semantic Media Wiki (SMW), 4, 6–8, 38, 116, 156, 158, 162, 168–169, 182, 197, 245–247, 250, 326 extensions, 158 Semantic-similarity, 294 Semantic toolbar, 231 Semi-supervised clustering, 129–130 Shareability, 35–36 Sharing, 310 Short-term context, 276 Size, 33 Smart phones, 23 SMW+, 8 deployment framework, 237 ontology browser, 234 query interface, 233 semantic tree view, 233 WikiTags, 235 WYSIWYG editor, 231, 232 SMW Ontology Editor, 41 Social and relational capital of networks, 20–22 Social intelligence, 13, 16 Social lending, 22 Socially intelligent targeting mechanism, 20 Social marketing, 20 Social media, 16, 18 Social networking sites, 20 Social networks, 12, 16, 20–22, 137, 139 Social selling, 21 Social Semantic Desktop (SSD), 8, 255–272, 326, 329 Social Semantic Desktop ontologies stack, 260, 261 Social web, 23 Socio-technical systems, 278 Software Usability Measurement Inventory (SUMI), 164, 165 Spreading activation, 294, 295 Storing, 310 Street View, 22 Summative workplace evaluation, 277 Syndication, 24

T Tags(tagging), 152, 154, 155, 162, 163, 165, 166, 168, 169, 326, 327 TAGtivity deskbar, 312

Index TAGtivity manager (TM), 312 TAGtivity prototype, 311 TAGtivity toolbar, 313 Task, 314 completion ability, 276 detection, 276, 288, 290 pane, 114 recording, 115 service, 115 switching, 107 wizard, 115 Text-based similarity, 294, 295 Third sector, 22 TNT (text, network, time), 133 Trade-off, 33–38 Transient activities, 315 Triple store connector (TSC), 230 Trust, 21 Twitter, 19

U Use-context information, 17 User experience, 310–311 User profile, 280, 283, 284, 286, 288, 291–293

337 User study, 314–315 User tests, 161–169

V Validation, 183 Value propositions, 22 Viewing, 310 Viral marketing, 20 Virtual collections, 311 Visualization, 141, 176–178

W Web 2.0, 4, 5, 8, 326 Web 2.0 capabilities, 15–17 Wikipedia, 18, 19 Work environments, 311–315 Workflows, 304 Work-Integrated Learning (WIL), 8, 275–299, 327 Workplace learning, 277–279

Z Zopa, 22