Cisco Wireless Controller Configuration Guide, Release 8.10

Table of contents :
Cisco Wireless Controller Configuration Guide, Release 8.10
Full Cisco Trademarks with Software License
Contents
Preface
Audience
Conventions
Related Documentation
Overview
Cisco Wireless Solution Overview
Core Components
Overview of Cisco Mobility Express
Initial Setup
Cisco WLAN Express Setup
Setting up Cisco Wireless Controller using Cisco WLAN Express (Wired Method)
RF Profile Configurations
Default Configurations
Configuring the Controller Using the Configuration Wizard
Configuring the Controller (GUI)
Configuring the Controller—Using the CLI Configuration Wizard
Using the AutoInstall Feature for Controllers Without a Configuration
Managing the Controller System Date and Time
Restrictions on Configuring the Controller Date and Time
Configuring the Date and Time (GUI)
Configuring the Date and Time (CLI)
Management of Controllers
Administration of Controller
Using the Controller Interface
Using the Controller GUI
Guidelines and Restrictions on using Controller GUI
Logging On to the GUI
Logging out of the GUI
Using the Controller CLI
Logging on to the Controller CLI
Using a Local Serial Connection
Using a Remote Telnet or SSH Connection
Logging Out of the CLI
Navigating the CLI
Enabling Web and Secure Web Modes
Enabling Web and Secure Web Modes (GUI)
Enabling Web and Secure Web Modes (CLI)
Telnet and Secure Shell Sessions
Configuring Telnet and SSH Sessions (GUI)
Configuring Telnet and SSH Sessions (CLI)
Managing and Monitoring Remote Telnet and SSH Sessions
Configuring Telnet Privileges for Selected Management Users (GUI)
Configuring Telnet Privileges for Selected Management Users (CLI)
Management over Wireless
Enabling Management over Wireless (GUI)
Enabling Management over Wireless (CLI)
Configuring Management using Dynamic Interfaces (CLI)
Monitoring Dashboard
Monitoring Dashboard
Numerical Statistics
Graphical Widgets
Network Summary
Network Summary—Access Points
Network Summary—Clients
Rogues
Rogue Access Points
Rogue Clients
Interferers
Wireless Dashboard
AP Performance
Client Performance
Best Practices
Managing Licenses
Cisco Wireless Controller Licensing
Installing a License
Installing a License (GUI)
Installing a License (CLI)
Viewing Licenses
Viewing Licenses (GUI)
Viewing Licenses (CLI)
Configuring the Maximum Number of Access Points Supported
Configuring Maximum Number of Access Points to be Supported (GUI)
Configuring Maximum Number of Access Points to be Supported (CLI)
Troubleshooting Licensing Issues
Activating an AP-Count Evaluation License
Information About Activating an AP-Count Evaluation License
Activating an AP-Count Evaluation License (GUI)
Activating an AP-Count Evaluation License (CLI)
Cisco Smart Software Licensing
Guidelines and Restrictions for Using Cisco Smart Software Licensing
Configuring Cisco Smart Software Licensing (GUI)
Configuring the Cisco Smart Software Licensing on WLC (CLI)
Updating DNS IP Address for Cisco Smart Software Licensing (CLI)
Right to Use Licensing
Configuring Right to Use Licensing (GUI)
Configuring Right to Use Licensing (CLI)
Rehosting Licenses
Information About Rehosting Licenses
Rehosting a License
Rehosting a License (GUI)
Rehosting a License (CLI)
License Agent
Configuring the License Agent (GUI)
Configuring the License Agent (CLI)
Call-Home
Configuring Call-Home (GUI)
Configuring Call-Home Parameters (CLI)
Retrieving the Unique Device Identifier on Controllers and Access Points
Retrieving the Unique Device Identifier on Controllers and Access Points (GUI)
Retrieving the Unique Device Identifier on Controllers and Access Points (CLI)
Managing Software
Upgrading the Controller Software
Guidelines and Restrictions for Upgrading Controller Software
Upgrading Controller Software (GUI)
Upgrading Controller Software (CLI)
Predownloading an Image to an Access Point
Access Point Predownload Process
Guidelines and Restrictions for Predownloading an Image to an Access Point
Predownloading an Image to Access Points—Global Configuration (GUI)
Predownloading an Image to Access Points (CLI)
Bootloader and Recovery Image
Configuring Boot Order (GUI)
Recovering an Access Point Using TFTP
Managing Configuration
Resetting the Controller to Default Settings
Resetting the Controller to Default Settings (GUI)
Resetting the Controller to Default Settings (CLI)
Saving Configurations
Editing Configuration Files
Clearing the Controller Configuration
Restoring Passwords
Rebooting the Controller
Transferring Files to and from a Controller
Backing Up and Restoring Controller Configuration
Uploading Configuration Files
Uploading the Configuration Files (GUI)
Uploading the Configuration Files (CLI)
Downloading Configuration Files
Downloading the Configuration Files (GUI)
Downloading the Configuration Files (CLI)
Downloading a Login Banner File
Downloading a Login Banner File (GUI)
Downloading a Login Banner File (CLI)
Clearing the Login Banner (GUI)
Uploading Diagnostic Support Bundle
Uploading Diagnostic Support Bundle (GUI)
Uploading Diagnostic Support Bundle (CLI)
Password Encryption
Guidelines and Restrictions for Password Encryption
Configuring Password Encryption (CLI)
Network Time Protocol Setup
Authentication for the Controller and NTP/SNTP Server
Guidelines and Restrictions on NTP
Configuring the NTP/SNTP Server to Obtain the Date and Time (GUI)
Configuring the NTP/SNTP Server to Obtain the Date and Time (CLI)
Configuring NTPv4 Keys for Authentication (GUI)
High Availability
Information About High Availability
Restrictions for High Availability
Configuring High Availability (GUI)
Enabling High Availability (CLI)
Configuring High Availability Parameters (CLI)
Troubleshooting Tips for IPsec Encryption for High Availability
vWLC and N+1 High Availability
Adding a Hash Key to a Cisco vWLC (GUI)
Adding a Hash Key to Cisco vWLC (CLI)
Monitoring High Availability Standby WLC
Replacing the Primary Controller in an HA Setup
Managing Certificates
Information about Loading an Externally Generated SSL Certificate
Loading an SSL Certificate (GUI)
Loading an SSL Certificate (CLI)
Downloading Device Certificates
Downloading Device Certificates (GUI)
Downloading Device Certificates (CLI)
Uploading Device Certificates
Uploading Device Certificates (GUI)
Uploading Device Certificates (CLI)
Downloading CA Certificates
Download CA Certificates (GUI)
Downloading CA Certificates (CLI)
Uploading CA Certificates
Uploading CA Certificates (GUI)
Uploading CA Certificates (CLI)
Generating a Certificate Signing Request
Generating a Certificate Signing Request using OpenSSL
Generating a Certificate Signing Request using Cisco Wireless Controller (GUI)
Generating a Certificate Signing Request using Cisco Wireless Controller (CLI)
Downloading Third-Party Certificate
Downloading Third-Party Certificate (GUI)
Downloading Third-Party Certificate (CLI)
AAA Administration
Setting up RADIUS for Management Users
Restrictions on Configuring RADIUS
Configuring RADIUS Authentication (GUI)
Configuring RADIUS Accounting Servers (GUI)
Configuring RADIUS (CLI)
RADIUS Authentication Attributes Sent by the Controller
Authentication Attributes Honored in Access-Accept Packets (Airespace)
RADIUS Accounting Attributes
RADIUS VSA
Sample RADIUS AVP List XML File
Downloading RADIUS AVP List (GUI)
Uploading RADIUS AVP List (GUI)
Uploading and Downloading RADIUS AVP List (CLI)
Custom NAS-ID for RADIUS Accounting Using Downloadable RADIUS AVP
Restrictions on Custom NAS-ID for RADIUS Accounting Using Downloadable RADIUS AVP
Configuring Custom NAS-ID AVP XML File
Deleting a NAS-ID AVP (GUI)
Viewing Custom NAS-ID Enhancement Configuration (GUI)
Viewing Custom NAS-ID Enhancement (CLI)
Per-WLAN RADIUS Source Support
Prerequisites for Per-WLAN RADIUS Source Support
Configuring Per-WLAN RADIUS Source Support (GUI)
Configuring Per-WLAN RADIUS Source Support (CLI)
Monitoring the Status of Per-WLAN RADIUS Source Support (CLI)
RADIUS Realm
Prerequisites for Configuring RADIUS Realm
Restrictions for Configuring RADIUS Realm
Configuring Realm on a WLAN (GUI)
Configuring Realm on a WLAN (CLI)
Configuring Realm on a RADIUS Authentication Server (GUI)
Configuring Realm on a RADIUS Authentication Server (CLI)
Configuring Realm on a RADIUS Accounting Server (GUI)
Configuring Realm on a RADIUS Accounting Server (CLI)
Disabling Accounting Servers per WLAN (GUI)
User Login Policies
Configuring User Login Policies (GUI)
Configuring User Login Policies (CLI)
AAA Override (Identity Networking)
RADIUS Attributes Used in Identity Networking
Configuring Network Access Identifier (CLI)
Setting up TACACS+
TACACS+ VSA
Configuring TACACS+ (GUI)
Configuring TACACS+ (CLI)
Maximum Local Database Entries
Configuring Maximum Local Database Entries (GUI)
Configuring Maximum Local Database Entries (CLI)
Managing Users
Administrator Usernames and Passwords
Restrictions on Managing User Accounts
Configuring Usernames and Passwords (GUI)
Configuring Usernames and Passwords (CLI)
Lobby Ambassador Account
Creating a Lobby Ambassador Account (GUI)
Creating a Lobby Ambassador Account (CLI)
Creating Guest User Accounts as a Lobby Ambassador (GUI)
Guest Accounts
Viewing the Guest Accounts (GUI)
Viewing the Guest Accounts (CLI)
Client Whitelisting
Restrictions for Client Whitelisting
Configuring Lobby Administrator by Global Administrator (GUI)
Configuring Lobby Administrator by Global Administrator (CLI)
Configuring Client Whitelist by Global Administrator (CLI)
Configuring Lobby Administrator Access on WLAN by Global Administrator (GUI)
Creating Client Whitelist by Lobby Administrator (GUI)
Adding MAC Addresses to a Whitelist by SSID
Adding Single MAC Address to Whitelist
Importing MAC Address CSV List to Whitelist
Deleting MAC Address from Whitelist (GUI)
Password Policies
Configuring Password Policies (GUI)
Configuring Password Policies (CLI)
Ports and Interfaces
Ports
Distribution System Ports
Restrictions for Configuring Distribution System Ports
Service Port
Configuring Ports (GUI)
Configuring Ports (CLI)
Monitoring Ports (CLI)
Link Aggregation
Restrictions on Link Aggregation
Configuring Link Aggregation (GUI)
Configuring Link Aggregation (CLI)
Verifying Link Aggregation Settings (CLI)
Configuring Neighbor Devices to Support Link Aggregation
Choosing Between Link Aggregation and Multiple AP-Manager Interfaces
Interfaces
Restrictions for Configuring Interfaces
Dynamic AP Management
WLANs
Management Interface
Configuring the Management Interface (GUI)
Configuring the Management Interface (CLI)
Virtual Interface
Configuring Virtual Interfaces (GUI)
Configuring Virtual Interfaces (CLI)
Service-Port Interfaces
Configuring Service-Port Interfaces Using IPv4 (GUI)
Configuring Service-Port Interfaces Using IPv4 (CLI)
Configuring Service-Port Interface Using IPv6 (GUI)
Configuring Service-Port Interfaces Using IPv6 (CLI)
Dynamic Interface
Prerequisites for Configuring Dynamic Interfaces
Restrictions on Configuring Dynamic Interfaces
Configuring Dynamic Interfaces (GUI)
Configuring Dynamic Interfaces (CLI)
AP-Manager Interface
Restrictions for Configuring AP Manager Interface
Configuring the AP-Manager Interface (GUI)
Configuring the AP Manager Interface (CLI)
Interface Groups
Restrictions on Configuring Interface Groups
Creating Interface Groups (GUI)
Creating Interface Groups (CLI)
Adding Interfaces to Interface Groups (GUI)
Adding Interfaces to Interface Groups (CLI)
Viewing VLANs in Interface Groups (CLI)
Adding an Interface Group to a WLAN (GUI)
Adding an Interface Group to a WLAN (CLI)
IPv6 Clients
IPv6 Client Mobility
Prerequisites for Configuring IPv6 Mobility
Restrictions on Configuring IPv6 Mobility
Global IPv6
Restrictions on Global IPv6
Configuring IPv6 Globally (GUI)
Configuring IPv6 Globally (CLI)
RA Guard
Configuring RA Guard (GUI)
Configuring RA Guard (CLI)
RA Throttling
Configuring RA Throttling (GUI)
Configuring the RA Throttle Policy (CLI)
IPv6 Neighbor Discovery
Configuring Neighbor Binding (GUI)
Configuring Neighbor Binding (CLI)
Access Control Lists
Information about Access Control Lists
Guidelines and Restrictions on Access Control Lists
Configuring Access Control Lists (GUI)
Applying an Access Control List to an Interface (GUI)
Applying an Access Control List to the Controller CPU (GUI)
Applying an Access Control List to a WLAN (GUI)
Applying a Preauthentication Access Control List to a WLAN (GUI)
Configuring Access Control Lists (CLI)
Applying Access Control Lists (CLI)
Layer 2 Access Control Lists
Restrictions on Layer 2 Access Control Lists
Configuring Layer 2 Access Control Lists (CLI)
Mapping of Layer 2 ACLs with WLANs (CLI)
Mapping of Layer 2 ACLs with Locally Switched WLANs Using FlexConnect Access Points (CLI)
Configuring Layer 2 Access Control Lists (GUI)
Applying a Layer2 Access Control List to a WLAN (GUI)
Applying a Layer2 Access Control List to an AP on a WLAN (GUI)
DNS-based Access Control Lists
Guidelines and Restrictions on DNS-based Access Control Lists
Configuring DNS-based Access Control Lists (CLI)
Configuring DNS-based Access Control Lists (GUI)
URL Filtering
Restrictions for URL Filtering
Configuring URL Filtering (GUI)
Configuring Access Control Lists (GUI)
Configuring an URL ACL List (GUI)
Applying a URL Filtering Access Control List Globally (GUI)
Applying a URL Filtering Access Control List to an Interface (GUI)
Applying a URL Filtering Access Control List for a WLAN (GUI)
Mapping the policy to a WLAN (GUI)
To delete a Policy-Mapping in a WLAN (GUI)
Mapping the policy to an AP Group (GUI)
Configuring URL Filtering (CLI)
Configuring URL Filtering (CLI)
Configuring Access Control List Rules (CLI)
Applying Local Policy (CLI)
Viewing URL Filtering (CLI)
Troubleshooting URL Filtering (CLI)
CNAME IPv6 Filtering
Restrictions for CNAME IPv6 Filtering
Configuring CNAME URL ACL (GUI)
Configuring Web Authentication for CNAME IPv6 Filtering on a WLAN (GUI)
Configuring Web Authentication for CNAME IPv6 Filtering Using External RADIUS Server (GUI)
Configuring IPv6 CNAME Filtering (CLI)
Domain-based Filtering
Restrictions on Domain-based Filtering
Configuring Domain-based Filtering (GUI)
Configuring Access Control Lists (GUI)
Creating a URL ACL List (GUI)
Applying a URL Filtering Access Control List Globally (GUI)
Applying a URL Filtering Access Control List to an Interface (GUI)
Applying a URL Filtering Access Control List for a WLAN (GUI)
Mapping the Policy to a WLAN (GUI)
To Delete a Policy-Mapping in a WLAN (GUI)
Mapping the Policy to an AP Group (GUI)
Configuring Domain Based Filtering (CLI)
Configuring URL Filtering (CLI)
Configuring Access Control List Rules (CLI)
Applying Local Policy (CLI)
Viewing URL Filtering (CLI)
Troubleshooting URL Filtering (CLI)
Multicast/Broadcast Setup
Multicast/Broadcast Mode
Restrictions on Configuring Multicast Mode
Enabling Multicast Mode (GUI)
Enabling Multicast Mode (CLI)
Viewing Multicast Groups (GUI)
Viewing Multicast Groups (CLI)
Viewing an Access Point’s Multicast Client Table (CLI)
Media Stream
Prerequisites for Media Stream
Restrictions for Configuring Media Stream
Configuring Media Stream (GUI)
Configuring Media Stream (CLI)
Configuring Media Parameters (GUI)
Viewing and Debugging Media Stream
Multicast Domain Name System
Restrictions for Configuring Multicast DNS
Configuring Multicast DNS (GUI)
Configuring Multicast DNS (CLI)
Bonjour Gateway Based on Access Policy
Restrictions on Bonjour Gateway Based on Access Policy
Configuring mDNS Service Groups (GUI)
Configuring mDNS Service Groups (CLI)
Controller Security
FIPS, CC, and UCAPL
FIPS
FIPS Self-Tests
Information About CC
Information About UCAPL
Configuring FIPS (CLI)
Configuring CC (CLI)
Configuring UCAPL (CLI)
Preparing Controller in FIPS Mode for Management in Cisco Prime Infrastructure (CLI)
Cisco TrustSec
Guidelines and Restrictions on Cisco TrustSec
Configuring Cisco TrustSec
Configuring Cisco TrustSec on Controller (GUI)
Configuring Cisco TrustSec on Cisco WLC (CLI)
Configuring Cisco TrustSec Override for an Access Point (CLI)
SXP
Configuring SXP on Cisco WLC (GUI)
Configuring SXP on Cisco WLC (CLI)
Configuring SXP on Cisco Access Points (GUI)
Configuring SXP on Cisco Access Points (CLI)
Cisco TrustSec Credentials
Configuring Cisco TrustSec Credentials (GUI)
Configuring Cisco TrustSec Credentials (CLI)
Configuring a RADIUS AAA Server (GUI)
Configuring RADIUS AAA Server (CLI)
Monitoring Environment Data
Monitoring Environment Data (GUI)
Monitoring Environment Data (CLI)
Configuring a Static Security Group Tag on a WLAN
Configuring a Static Security Group Tag on a WLAN (GUI)
Configuring a Static Security Group Tag on a WLAN (CLI)
Configuring Inline Tagging
Configuring Inline Tagging in Cisco WLC (GUI)
Configuring Inline Tagging in Cisco WLC (CLI)
Configuring Inline Tagging in Cisco Access Points (GUI)
Configuring Inline Tagging in Cisco Access Points (CLI)
Verifying SGACL Policy Download
Verifying SGACL Policy Download in Cisco WLC (GUI)
Verifying SGACL Policy Download in Cisco WLC (CLI)
Configuring Policy Enforcement
Configuring Policy Enforcement (GUI)
Configuring Policy Enforcement (CLI)
Debugging Cisco TrustSec in Cisco WLC (CLI)
Cisco TrustSec Commands on Lightweight APs
IPSec Profile
Configuring an IPSec Profile (GUI)
Configuring an IPSec Profile (CLI)
Cisco Umbrella WLAN (OpenDNS)
Cisco Umbrella WLAN (OpenDNS)
Configuring Cisco Umbrella WLAN (GUI)
Configuring Cisco Umbrella WLAN (CLI)
Configuring Local Policies for Cisco Umbrella (GUI)
SNMP
Guidelines and Limitations for SNMP
Configuring SNMP (CLI)
SNMP Community Strings
Changing the SNMP Community String Default Values (GUI)
Changing the SNMP Community String Default Values (CLI)
Configuring Real Time Statistics (CLI)
SNMP Trap Enhancements
Configuring SNMP Trap Receiver (GUI)
Mobility
Overview
Information About Mobility
Guidelines and Restrictions
Mobility Groups
Information About Mobility Groups
Prerequisites for Configuring Mobility Groups
Configuring Mobility Groups (GUI)
Configuring Mobility Groups (CLI)
Viewing Mobility Group Statistics (GUI)
Viewing Mobility Group Statistics (CLI)
Profile Name Matching for Mobility Anchor
Configuring Profile Name Matching for Mobility Anchor (CLI)
Auto-Anchor Mobility
Information about Auto-Anchor Mobility
Restrictions for Auto-Anchor Mobility
Configuring Auto-Anchor Mobility (GUI)
Configuring Auto-Anchor Mobility (CLI)
Guest Anchor Priority
Configuring Guest Anchor Priority (GUI)
Configuring Guest Anchor Priority (CLI)
Dynamic Anchoring for Clients with Static IP
How Dynamic Anchoring of Static IP Clients Works
Restrictions on Dynamic Anchoring for Clients With Static IP Addresses
Configuring Dynamic Anchoring of Static IP Clients (GUI)
Configuring Dynamic Anchoring of Static IP Clients (CLI)
Monitoring and Validating Mobility
Mobility Ping Tests
Restrictions for Mobility Ping Tests
Running Mobility Ping Tests (CLI)
WLAN Mobility Security Values
Wireless
Country Codes
Information About Configuring Country Codes
Restrictions for Configuring Country Codes
Configuring Country Codes (GUI)
Configuring Country Codes (CLI)
Radio Bands
802.11 Bands
Configuring the 802.11 Bands (GUI)
Configuring the 802.11 Bands (CLI)
802.11n Parameters
Configuring the 802.11n Parameters (GUI)
Configuring the 802.11n Parameters (CLI)
802.11ac Parameters
Restrictions for 802.11ac Support
Configuring the 802.11ac/ax High-Throughput Parameters (GUI)
Configuring MU-MIMO (GUI)
Configuring the 802.11ac High-Throughput Parameters (CLI)
Configuring MU-MIMO (CLI)
802.11ax Parameters
Configuring the 802.11ax High-Throughput Parameters (GUI)
Configuring MU-MIMO on the 802.11ax Radio Band (GUI)
Configuring Orthogonal Frequency-Division Multiple Access on the 802.11ax Radio Band (GUI)
Configuring the 802.11ax High-Throughput Parameters (CLI)
Configuring MU-MIMO (CLI)
Configuring Orthogonal Frequency-Division Multiple Access (CLI)
Advanced Scheduling Request
Configuring Advanced Scheduling Requests (CLI)
Viewing Advanced Scheduling Requests (CLI)
Viewing Advanced Scheduling Requests on an Access Point (CLI)
Radio Resource Management
Information about Radio Resource Management
Radio Resource Monitoring
Benefits of RRM
Information About Configuring RRM
Configuring RRM (CLI)
Viewing RRM Settings (CLI)
RF Groups
Information About RF Groups
RF Group Leader
RF Group Name
Controllers and APs in RF Groups
Configuring RF Groups
Configuring an RF Group Name (GUI)
Configuring an RF Group Name (CLI)
Configuring the RF Group Mode (GUI)
Configuring the RF Group Mode (CLI)
Viewing RF Group Status
Viewing the RF Group Status (GUI)
Viewing the RF Group Status (CLI)
Rogue Access Point Detection in RF Groups
Enabling Rogue Access Point Detection in RF Groups (GUI)
Configuring Rogue Access Point Detection in RF Groups (CLI)
Off-Channel Scanning Deferral
Configuring Off-Channel Scanning Deferral for WLANs
Configuring Off-Channel Scanning Deferral for a WLAN (GUI)
Configuring Off Channel Scanning Deferral for a WLAN (CLI)
RRM NDP and RF Grouping
Configuring RRM NDP (CLI)
Channels
Dynamic Channel Assignment
Configuring Dynamic Channel Assignment (GUI)
Configuring RRM Profile Thresholds, Monitoring Channels, and Monitor Intervals (GUI)
Overriding RRM
Prerequisites for Overriding RRM
Statically Assigning Channel and Transmit Power Settings (GUI)
Statically Assigning Channel and Transmit Power Settings (CLI)
Disabling Dynamic Channel and Power Assignment (CLI)
802.11h Parameters
Configuring the 802.11h Parameters (GUI)
Configuring the 802.11h Parameters (CLI)
Transmit Power Control
Overriding the TPC Algorithm with Minimum and Maximum Transmit Power Settings
Configuring Transmit Power Control (GUI)
Coverage Hole Detection and Correction
Configuring Coverage Hole Detection (GUI)
RF Profiles
Prerequisites for Configuring RF Profiles
Restrictions on Configuring RF Profiles
Configuring an RF Profile (GUI)
Configuring an RF Profile (CLI)
Applying an RF Profile to AP Groups (GUI)
Applying RF Profiles to AP Groups (CLI)
XOR Radios and Flexible Radio Assignment
Advantages of Flexible Radio Assignment
Additional References
Configuring Flexible Radio Assignment-Global (GUI)
Configuring Flexible Radio Assignment (CLI)
Configuring Flexible Radio Assignment for AP (GUI)
Configuring Auto Radio Role of the XOR Radio (CLI)
Configuring Manual Radio Role for the AP (CLI)
Configuring Radio Band for Client-Serving Radio (CLI)
Debug RRM Issues (CLI)
CleanAir
Role of the Cisco Wireless LAN Controller in a Cisco CleanAir System
Interference Types that Cisco CleanAir Can Detect
Persistent Devices
Persistent Devices Detection
Persistent Devices Propagation
Detecting Interferers by an Access Point
Detecting Persistent Sources of Interference
Prerequisites for CleanAir
Restrictions for CleanAir
Configuring Cisco CleanAir on the Controller
Configuring Cisco CleanAir on Cisco WLC (GUI)
Configuring Cisco CleanAir on Cisco WLC (CLI)
Configuring Cisco CleanAir on an Access Point
Configuring Cisco CleanAir on an Access Point (GUI)
Configuring Cisco CleanAir on an Access Point (CLI)
Configuring Spectrum Intelligence
Information About Spectrum Intelligence
Restrictions on Spectrum Intelligence
Configuring Spectrum Intelligence – Global (GUI)
Configuring Spectrum Intelligence per AP (GUI)
Configuring Spectrum Intelligence (CLI)
Debugging Spectrum Intelligence on Supported APs (CLI)
Monitoring Interference Devices
Prerequisites for Monitoring the Interference Devices
Monitoring the Interference Device (GUI)
Monitoring the Interference Device (CLI)
Detecting Interferers by an Access Point
Detecting Interferers by Device Type
Monitoring Persistent Devices (GUI)
Monitoring Persistent Devices (CLI)
Monitoring the Air Quality of Radio Bands
Monitoring the Air Quality of Radio Bands (GUI)
Monitoring the Air Quality of Radio Bands (CLI)
Viewing a Summary of the Air Quality
Viewing Air Quality for all Access Points on a Radio Band
Viewing Air Quality for an Access Point on a Radio Band (CLI)
Monitoring the Worst Air Quality of Radio Bands (GUI)
Monitoring the Worst Air Quality of Radio Bands (CLI)
Viewing a Summary of the Air Quality (CLI)
Viewing the Worst Air Quality Information for all Access Points on a Radio Band (CLI)
Viewing the Air Quality for an Access Point on a Radio Band (CLI)
Viewing the Air Quality for an Access Point by Device Type (CLI)
Detecting Persistent Sources of Interference (CLI)
Wireless Quality of Service
Call Admission Control
Voice and Video Parameters
Configuring Voice Parameters
Configuring Voice Parameters (GUI)
Configuring Voice Parameters (CLI)
Configuring Video Parameters
Configuring Video Parameters (GUI)
Configuring Video Parameters (CLI)
Viewing Voice and Video Settings
Viewing Voice and Video Settings (GUI)
Viewing Voice and Video Settings (CLI)
Configuring SIP-Based CAC
Restrictions for SIP-Based CAC
Configuring SIP-Based CAC (GUI)
Configuring SIP-Based CAC (CLI)
Voice Prioritization Using Preferred Call Numbers
Prerequisites for Configuring Voice Prioritization Using Preferred Call Numbers
Configuring a Preferred Call Number (GUI)
Configuring a Preferred Call Number (CLI)
Enhanced Distributed Channel Access Parameters
Configuring EDCA Parameters (GUI)
Configuring EDCA Parameters (CLI)
Key Telephone System-Based CAC
Restrictions for Key Telephone System-Based CAC
Configuring KTS-based CAC (GUI)
Configuring KTS-based CAC (CLI)
Related Commands
Application Visibility and Control
Restrictions for Application Visibility and Control
Configuring Application Visibility and Control (GUI)
Configuring Application Visibility and Control (CLI)
AVC-based Reanchoring
Guidelines and Restrictions for AVC-based Reanchoring
Configuring AVC-based Selective Reanchoring (GUI)
Configuring AVC-based Selective Reanchoring (CLI)
Application Visibility Control for FlexConnect
Configuring Application Visibility and Control for FlexConnect (GUI)
Configuration Example
Configuring Application Visibility and Control for FlexConnect (CLI)
Configuration Example
NetFlow
Restrictions for Using Netflow
Configuring NetFlow (GUI)
Configuring NetFlow (CLI)
QoS Profiles
Configuring QoS Profiles (GUI)
Configuring QoS Profiles (CLI)
Assigning a QoS Profile to a WLAN (GUI)
Assigning a QoS Profile to a WLAN (CLI)
Cisco Air Time Fairness
Configuring Cisco Air Time Fairness (GUI)
Configuring Cisco ATF Monitor Mode (GUI)
Configuring Cisco ATF Policy (GUI)
Configuring Cisco ATF Enforcement SSID (GUI)
Monitoring ATF Statistics (GUI)
Configuring Cisco Air Tme Fairness (CLI)
Location Services
Cisco Hyperlocation
Cisco Hyperlocation in a High Availability Environment
Cisco Hyperlocation Client Debug Tracing
Configuring Cisco Hyperlocation
Configuring Cisco Hyperlocation for all APs (GUI)
Configuring Cisco Hyperlocation for an AP (GUI)
Configuring Cisco Hyperlocation for an AP Group (GUI)
Configuring Cisco Hyperlocation for all APs (CLI)
Configuring Cisco Hyperlocation for an AP (CLI)
Configuring Cisco Hyperlocation for an AP Group (CLI)
FastLocate for Cisco Wave 2 Access Points
Configuring FastLocate on Cisco Wave 2 APs (GUI)
Cisco FastLocate for Cisco Catalyst 9100 Access Points
Cisco FastLocate Network Components
Configuring Cisco FastLocate for Cisco Catalyst 9100 Access Points(CLI)
Optimizing RFID Tracking on Access Points
Optimizing RFID Tracking on Access Points (GUI)
Optimizing RFID Tracking on Access Points (CLI)
Location Settings
Configuring Location Settings (CLI)
Viewing Location Settings (CLI)
Modifying the NMSP Notification Interval for Clients, RFID Tags, and Rogues (CLI)
Viewing NMSP Settings (CLI)
Debugging NMSP Issues
Probe Request Forwarding
Configuring Probe Request Forwarding (CLI)
CCX Radio Management
Radio Measurement Requests
Location Calibration
Configuring CCX Radio Management
Configuring CCX Radio Management (GUI)
Configuring CCX Radio Management (CLI)
Viewing CCX Radio Management Information (CLI)
Debugging CCX Radio Management Issues (CLI)
Mobile Concierge
Configuring Mobile Concierge (802.11u) (GUI)
Configuring Mobile Concierge (802.11u) (CLI)
Online Sign Up
802.11u MSAP
Configuring 802.11u MSAP (GUI)
Configuring MSAP (CLI)
Configuring 802.11u HotSpot
Information About 802.11u HotSpot
Configuring 802.11u HotSpot (GUI)
Configuring HotSpot 2.0 (CLI)
Configuring Access Points for HotSpot2 (GUI)
Configuring Access Points for HotSpot2 (CLI)
Downloading the Icon File (CLI)
Configuring ICONs
Downloading an ICON File (GUI)
Configuring an ICON (GUI)
Configuring OSEN Support (CLI)
Configuring OSEN Details (GUI)
Configuring OSU (CLI)
Configuring OSU Details (GUI)
Configuring WAN Metrics
CMX Cloud Connector
Prerequisites for CMX Cloud Connector
Restrictions for CMX Cloud Connector
Configuring CMX Cloud Connector (GUI)
Configuring CMX Cloud Connector (CLI)
Installing CMX-Serv CA Certificate on a Controller (CLI)
NMSP by AP Groups with Subscription List from CMX
Guidelines and Restrictions for NMSP by AP Groups with Subscription List from CMX
Monitoring NMSP by AP Groups with Subscription List from CMX (GUI)
Monitoring NMSP by AP Groups with Subscription List from CMX (CLI)
Wireless Intrusion Detection System
Protected Management Frames (Management Frame Protection)
Configuring Infrastructure MFP (GUI)
Viewing the Management Frame Protection Settings (GUI)
Configuring Infrastructure MFP (CLI)
Viewing the Management Frame Protection Settings (CLI)
Debugging Management Frame Protection Issues (CLI)
Rogue Management
Configuring Rogue Detection (GUI)
Configuring Rogue Detection (CLI)
Rogue Access Point Classification
Guidelines and Restrictions for Classifying Rogue Access Points
Configuring Rogue Classification Rules (GUI)
Viewing and Classifying Rogue Devices (GUI)
Configuring Rogue Classification Rules (CLI)
Viewing and Classifying Rogue Devices (CLI)
Intrusion Detection System Signatures
Uploading or Downloading IDS Signatures
Configuring IDS Signatures (GUI)
Viewing IDS Signature Events (GUI)
Configuring IDS Signatures (CLI)
Viewing IDS Signature Events (CLI)
Cisco Intrusion Detection System
Shunned Clients
Configuring IDS Sensors (GUI)
Viewing Shunned Clients (GUI)
Configuring IDS Sensors (CLI)
Viewing Shunned Clients (CLI)
Wireless Intrusion Prevention System
Restrictions for wIPS
Configuring wIPS on an Access Point (GUI)
Configuring wIPS on an Access Point (CLI)
Viewing wIPS Information (CLI)
Cisco Adaptive wIPS Alarms
Advanced Wireless Tuning
Aggressive Load Balancing
Configuring Aggressive Load Balancing (GUI)
Configuring Aggressive Load Balancing (CLI)
Reanchoring of Roaming Voice Clients
Restrictions for Configuring Reanchoring of Roaming Voice Clients
Configuring Reanchoring of Roaming Voice Clients (GUI)
Configuring Reanchoring of Roaming Voice Clients (CLI)
SpectraLink NetLink Telephones
Enabling Long Preambles (GUI)
Enabling Long Preambles (CLI)
Receiver Start of Packet Detection Threshold
Guidelines and Restrictions for RxSOP
Configuring Rx SOP (GUI)
Configuring RxSOP (CLI)
Timers
Information about Wireless Timers
Restrictions for Wireless Timers
Configuring Wireless Timers (GUI)
Configuring Wireless Timers (CLI)
Cisco DNA Center Assurance Wi-Fi 6 Dashboard
Cisco DNA Center Assurance Wi-Fi 6 Dashboard
Configuring Wi-Fi 6 Parameters (CLI)
Verifying Wi-Fi 6 Access Point Parameters (CLI)
Verifying Wi-Fi 6 Access Point Parameters in AP Console
Access Points
AP Power and Uplink LAN Connections
Power over Ethernet
Configuring Power over Ethernet (GUI)
Configuring Power over Ethernet (CLI)
Cisco Discovery Protocol
Restrictions for Cisco Discovery Protocol
Configuring the Cisco Discovery Protocol
Configuring the Cisco Discovery Protocol (GUI)
Configuring the Cisco Discovery Protocol (CLI)
Viewing Cisco Discovery Protocol Information
Viewing Cisco Discovery Protocol Information (GUI)
Viewing Cisco Discovery Protocol Information (CLI)
Getting CDP Debug Information
Cisco Wave 2 AP’s USB Port as Power Source
Configuring Cisco Aironet AP’s USB Port as Power Source (GUI)
Configuring a Cisco AP Group to Use the Cisco AP’s USB Port as Power Source (GUI)
Configuring Cisco Aironet APs USB Port as Power Source (WLC-CLI)
Viewing Cisco Aironet APs USB Port as Power Source (AP-CLI)
Viewing AP Serviceability (AP CLI)
Cisco 700 Series Access Points
Configuring Cisco 700 Series Access Points
Enabling the LAN Ports (CLI)
Enabling 702W LAN Ports
Remote LAN Support for Wired Ports on Cisco Aironet 702W APs
Role of Controller
Role of an AP
IEEE 802.1X Authentication Modes
Single-Host Mode
Multi-Host Mode
Violation Mode
Configuring Preauthentication Open (CLI)
Configuring IEEE 802.1X Authentication Modes (CLI)
Enabling IEEE 802.1X Authentication in Cisco WLC (GUI)
Enabling IEEE 802.1X Authentication (CLI)
Mapping an RLAN to an AP Port in Controller (GUI)
Mapping an RLAN to an AP Port in Controller (CLI)
Mapping an RLAN to an AP Port in Cisco WLC per AP (GUI)
MAB Authentication Support for AP Port LAN Client in Cisco Aironet 702w Access Points
Configuring MAB Support on AP Port LAN Clients (GUI)
Configuring MAB Support for AP Port LAN Clients (CLI)
Converting Cisco Wave 2 AP AUX Port to Downlink LAN (RLAN) Port (CLI)
Re-enabling LAG Mode on Cisco Wave 2 APs (CLI)
AP Connectivity to Controller
CAPWAP
Restrictions for Access Point Communication Protocols
Viewing CAPWAP Maximum Transmission Unit Information
Debugging CAPWAP
Configuring Dynamic PMTU in APs (CLI)
Link Latency
Restrictions for Link Latency
Configuring Link Latency (GUI)
Configuring Link Latency (CLI)
Preferred Mode
Guidelines for Configuring Preferred Mode
Configuring CAPWAP Preferred Mode (GUI)
Configuring CAPWAP Preferred Mode (CLI)
IPv6 CAPWAP UDP Lite
Configuring UDP Lite Globally (GUI)
Configuring UDP Lite on AP (GUI)
Configuring the UDP Lite (CLI)
Data Encryption
Restrictions on Data Encryption
Configuring Data Encryption (GUI)
Configuring Data Encryption (CLI)
VLAN Tagging for CAPWAP Frames from Access Points
Configuring VLAN Tagging for CAPWAP Frames from Access Points (GUI)
Configuring VLAN Tagging for CAPWAP Frames from Access Points (CLI)
Discovering and Joining Controllers
Controller Discovery Process
Guidelines and Restrictions on Controller Discovery Process
Using DHCP Option 43 and DHCP Option 60
Backup Controllers
Restrictions for Configuring Backup Controllers
Configuring Backup Controllers (GUI)
Configuring Backup Controllers (CLI)
Failover Priority for Access Points
Configuring Failover Priority for Access Points (GUI)
Configuring Failover Priority for Access Points (CLI)
Viewing Failover Priority Settings (CLI)
AP Retransmission Interval and Retry Count
Restrictions for Access Point Retransmission Interval and Retry Count
Configuring the AP Retransmission Interval and Retry Count (GUI)
Configuring the Access Point Retransmission Interval and Retry Count (CLI)
Authorizing Access Points
Authorizing Access Points Using SSCs
Authorizing Access Points for Virtual Controllers Using SSC
Configuring SSC (GUI)
Configuring SSC (CLI)
Authorizing Access Points Using MICs
Authorizing Access Points Using LSCs
Configuring Locally Significant Certificates (GUI)
Configuring Locally Significant Certificates (CLI)
Authorizing Access Points (GUI)
Authorizing Access Points (CLI)
Plug and Play (PnP)
AP Wired 802.1X Supplicant
Prerequisites for Configuring Wired 802.1X Authentication for Access Points
Restrictions for Authenticating Access Points
Configuring 802.1X Authentication Protocols for All Access Points (GUI)
Configuring 802.1X Authentication Protocols for All Access Points (CLI)
Configuring 802.1X Authentication Protocols for An Access Point (GUI)
Configuring 802.1X Authentication Protocols for An Access Point (CLI)
Configuring LSC Authentication State (GUI)
Configuring LSC Authentication State (CLI)
Adding AP to an LSC Provisioned Network
Configuring the Switch for Authentication
Configuring a Static IP Address on a Lightweight Access Point
Configuring a Static IP Address (GUI)
Configuring a Static IP Address (CLI)
Retaining Static IP Address of an AP (CLI)
Troubleshooting the Access Point Join Process
Configuring the Syslog Server for Access Points (CLI)
Viewing Access Point Join Information
Viewing Access Point Join Information (GUI)
Viewing Access Point Join Information (CLI)
Managing APs
Access Point Modes
Global Credentials for Access Points
Restrictions for Global Credentials for Access Points
Configuring Global Credentials for Access Points
Configuring Global Credentials for Access Points (GUI)
Configuring Global Credentials for Access Points (CLI)
Configuring Telnet and SSH for Access Points
Configuring Telnet and SSH for APs (GUI)
Configuring Telnet and SSH for APs (CLI)
Cisco Access Point with Tri-Radio
Guidelines and Restrictions for Tri-Radio Access Points
Configuring Tri-Radio Parameters for an AP (GUI)
Configuring Dual Radio on a Tri-Radio AP (CLI)
Configuring Radio Role on a Tri-Radio AP (CLI)
Spectrum Expert Connection
Configuring Spectrum Expert (GUI)
Cisco Universal Small Cell 8x18 Dual-Mode Module
Configuring Cisco Universal Small Cell 8x18 Dual-Mode Module
Configuring Cisco Universal Small Cell 8x18 Dual-Mode Module (GUI)
Configuring Cisco Universal Small Cell 8x18 Dual-Mode Module (CLI)
Configuring USC8x18 Dual-Mode Module in Different Scenarios
Configuring VLAN Tagging for USC8x18 Dual-Mode Module in FlexConnect Local Switching (GUI)
Configuring VLAN Tagging for USC8x18 Dual-Mode Module in FlexConnect Local Switching (CLI)
Configuring VLAN Tagging for USC8x18 Dual-Mode Module in FlexConnect Group Local Switching (GUI)
Configuring VLAN Tagging for USC8x18 Dual-Mode Module in FlexConnect Group Local Switching (CLI)
Configuring USC8x18 Dual-Mode Module in Local Mode Central Switching (GUI)
Configuring USC8x18 Dual-Mode Module in Local Mode Central Switching (CLI)
LED States for Access Points
Configuring the LED State for Access Points in a Network Globally (GUI)
Configuring the LED State for Access Point in a Network Globally (CLI)
Configuring LED State on a Specific Access Point (GUI)
Configuring LED State on a Specific Access Point (CLI)
Configuring Flashing LEDs
Information About Configuring Flashing LEDs
Configuring Flashing LEDs (CLI)
Configuring LED Flash State on a Specific Access Point (GUI)
LED Brightness Settings
Configuring LED Brightness Level for AP Globally (GUI)
Configuring LED Brightness Level on a Specific AP (GUI)
Configuring LED Brightness Level (CLI)
Access Points with Dual-Band Radios
Configuring Access Points with Dual-Band Radios (GUI)
Configuring Access Points with Dual-Band Radios (CLI)
Access Point Antenna Monitoring and Failure Detection
Configuring Access Point Antenna Monitoring and Failure Detection (CLI)
Monitoring Access Point Antenna Monitoring and Failure Detection (CLI)
BSS Coloring and Spatial Reuse
BSS Coloring
Guidelines
Configuring BSS Coloring Globally on a Radio Band (CLI)
Configuring BSS Color for a Specific Access Point (CLI)
Mesh Access Points
Connecting Mesh Access Points to the Network
Overview
Adding Mesh Access Points to the Mesh Network
Adding MAC Addresses of Mesh Access Points to MAC Filter
Adding the MAC Address of the Mesh Access Point to the Controller Filter List (CLI)
Defining Mesh Access Point Role
Configuring the AP Role (CLI)
Configuring Multiple Controllers Using DHCP 43 and DHCP 60
Configuring External Authentication and Authorization Using a RADIUS Server
Configuring RADIUS Servers
Enable External Authentication of Mesh Access Points (CLI)
View Security Statistics (CLI)
Mesh PSK Key Provisioning
CLI Commands for PSK Provisioning
Configuring Global Mesh Parameters
Configuring Global Mesh Parameters (CLI)
Viewing Global Mesh Parameter Settings (CLI)
Backhaul Client Access
Configuring Backhaul Client Access (GUI)
Configuring Backhaul Client Access (CLI)
Configuring Local Mesh Parameters
Configuring Wireless Backhaul Data Rate
Configuring Ethernet Bridging
Configuring Native VLAN (CLI)
Configuring Bridge Group Names
Configuring Bridge Group Names (CLI)
Configuring Antenna Gain
Configuring Antenna Gain (CLI)
Configuring Mesh Leaf Node
Configuring Advanced Features
Configuring Ethernet VLAN Tagging
Ethernet Port Notes
VLAN Registration
Ethernet VLAN Tagging Guidelines
Configuring Ethernet VLAN Tagging (CLI)
Viewing Ethernet VLAN Tagging Configuration Details (CLI)
Workgroup Bridge Interoperability with Mesh Infrastructure
Configuring Workgroup Bridges
Guidelines for Configuration
Configuration Example
WGB Association Check
Link Test Result
WGB Wired/Wireless Client
Client Roaming
WGB Roaming Guidelines
Configuration Example
Troubleshooting Tips
Configuring Voice Parameters in Indoor Mesh Networks
Call Admission Control
Quality of Service and Differentiated Services Code Point Marking
Guidelines For Using Voice on the Mesh Network
Voice Call Support in a Mesh Network
Enabling Mesh Multicast Containment for Video
Viewing the Voice Details for Mesh Networks (CLI)
Enabling Multicast on the Mesh Network (CLI)
IGMP Snooping
Locally Significant Certificates for Mesh APs
Guidelines for Configuration
Differences Between LSCs for Mesh APs and Normal APs
Certificate Verification Process in LSC AP
Getting Certificates for LSC Feature
Configuring a Locally Significant Certificate (CLI)
LSC only MAP Authentication using wild card MAC
Information about LSC-Only MAP Authentication using wild card MAC
Configuring LSC-Only Authentication for Mesh Access Points (GUI)
Configuring LSC-Only Authentication for Mesh Access Points (CLI)
LSC-Related Commands
Controller GUI Security Settings
Deployment Guidelines
Configuring Antenna Band Mode
Information About Configuring Antenna Band Modes
Configuring Antenna Band Mode (CLI)
Configuring Antenna Band Mode (AP CLI)
Configuring Daisy Chaining on Cisco Aironet 1530 Series Access Points
Information About Daisy Chaining the Cisco Aironet 1530 Series Access Points
Configuring Daisy Chaining (CLI)
Configuring Daisy Chaining (AP CLI)
Configuring a Daisy-Chain
Enabling Daisy-Chaining using the WLC GUI
Enabling Daisy-Chaining using the WLC CLI
Enabling Daisy-Chaining using the AP CLI
Setting a Preferred Parent for each Serial-Backhaul AP
Configuring Mesh Convergence
Information About Mesh Convergence
Restrictions on Mesh Convergence
Configuring Mesh Convergence (CLI)
Switching Between LWAPP and Autonomous Images (AP CLI)
Information About DHCP on RAP
Restrictions on DHCP on RAP
Configuring DHCP on RAP on a Controller (CLI)
Configuring DHCP on RAP on a Mesh AP (CLI)
Debugging DHCP on RAP on a Mesh AP (CLI)
Information About NAT-PAT on RAP
Restrictions on NAT-PAT on RAP
Viewing NAT-PAT on RAP on a Mesh AP (CLI)
Debugging NAT-PAT on RAP on a Mesh AP (CLI)
Speeding up Mesh Network Recovery Through Fast Detection of Uplink Gateway Reachability Failure
Configuring Mesh Leaf Node
Checking the Health of the Network
Show Mesh Commands
Viewing General Mesh Network Details
Viewing Mesh Access Point Details
Viewing Global Mesh Parameter Settings
Viewing Bridge Group Settings
Viewing VLAN Tagging Settings
Viewing DFS Details
Viewing Security Settings and Statistics
Viewing GPS Status
Viewing Mesh Statistics for a Mesh Access Point
Viewing Mesh Statistics for a Mesh Access Point (GUI)
Viewing Mesh Statistics for a Mesh Access Point (CLI)
Viewing Neighbor Statistics for a Mesh Access Point
Viewing Neighbor Statistics for a Mesh Access Point (GUI)
Viewing the Neighbor Statistics for a Mesh Access Point (CLI)
Troubleshooting Mesh Access Points
Installation and Connections
Debug Commands
Remote Debug Commands
AP Console Access
Cable Modem Serial Port Access from an AP
Configuration
Mesh Access Point CLI Commands
Mesh Access Point Debug Commands
Defining Mesh Access Point Roles
Backhaul Algorithm
Passive Beaconing (Anti-Stranding)
Dynamic Frequency Selection
DFS in RAP
DFS in MAP
Preparation in a DFS Environment
Monitoring DFS
Frequency Planning
Good Signal-to-Noise Ratios
Access Point Placement
Bridge Group Name Misconfiguration
Misconfiguration of the Mesh Access Point IP Address
Misconfiguration of DHCP
Identifying the Node Exclusion Algorithm
Throughput Analysis
Client Network
Client Traffic Forwarding Configurations
802.3 Bridging
Restrictions on 802.3 Bridging
Configuring 802.3 Bridging (GUI)
Configuring 802.3 Bridging (CLI)
Enabling 802.3X Flow Control
Bridging Link Local Traffic
Configuring Bridging of Link Local Traffic (GUI)
Configuring Bridging of Link Local Traffic (CLI)
IP-MAC Address Binding
Configuring IP-MAC Address Binding (CLI)
TCP Adjust MSS
Configuring TCP Adjust MSS (GUI)
Configuring TCP Adjust MSS (CLI)
Passive Clients
Restrictions for Passive Clients
Configuring Passive Clients (GUI)
Configuring Passive Clients (CLI)
Configuring the Gratuitous ARP (GARP) Forwarding to Wireless Networks
Enabling the Multicast-Multicast Mode (GUI)
Enabling the Global Multicast Mode on Controllers (GUI)
Enabling the Passive Client Feature on the Controller (GUI)
Multicast-to-Unicast Support for Passive Client ARPs
Restrictions in Multicast-to-Unicast Support for Passive Client ARPs
Configuring Unicast Mode (GUI)
Configuring Unicast mode on WLC (CLI)
Quality of Service
Quality of Service
QoS Profiles
Configuring QoS Profiles (GUI)
Configuring QoS Profiles (CLI)
Assigning a QoS Profile to a WLAN (GUI)
Assigning a QoS Profile to a WLAN (CLI)
Quality of Service Roles
Configuring QoS Roles (GUI)
Configuring QoS Roles (CLI)
QoS Map
Guidelines and Restrictions for QoS Map
Configuring QoS Map (GUI)
Configuring QoS Map (CLI)
FastLane QoS
Configuring Fastlane QoS (CLI)
Restrictions on Fastlane QoS
Enabling Fastlane QoS per WLAN
Disabling Fastlane QoS in WLANs
Disabling Fastlane QoS Globally
Configuring Fastlane QoS (GUI)
Disabling Fastlane QoS Globally (GUI)
SIP (Media Session) Snooping, CAC, and Reporting
Restrictions for SIP (Media Session) Snooping, CAC, and Reporting
Configuring Media Session Snooping (GUI)
Configuring Media Session Snooping (CLI)
Voice and Video Parameters
Call Admission Control
Static CAC
Load-Based CAC
Expedited Bandwidth Requests
U-APSD
Traffic Stream Metrics
Configuring Voice Parameters
Configuring Voice Parameters (GUI)
Configuring Voice Parameters (CLI)
Configuring Video Parameters
Configuring Video Parameters (GUI)
Configuring Video Parameters (CLI)
Viewing Voice and Video Settings
Viewing Voice and Video Settings (GUI)
Viewing Voice and Video Settings (CLI)
SIP-based CAC
Restrictions for SIP-Based CAC
Configuring SIP-Based CAC (GUI)
Configuring SIP-Based CAC (CLI)
Enhanced Distributed Channel Access Parameters
Configuring EDCA Parameters (GUI)
Configuring EDCA Parameters (CLI)
WLANs
Information About WLANs
Prerequisites for WLANs
Restrictions for WLANs
Creating and Removing WLANs (GUI)
Enabling and Disabling WLANs (GUI)
Editing WLAN SSID or Profile Name for WLANs (GUI)
Creating and Deleting WLANs (CLI)
Enabling and Disabling WLANs (CLI)
Editing WLAN SSID or Profile Name for WLANs (CLI)
Viewing WLANs (CLI)
Searching WLANs (GUI)
Assigning WLANs to Interfaces
Per-WLAN Wireless Settings
DTIM Period
Configuring the DTIM Period (GUI)
Configuring the DTIM Period (CLI)
Cisco Client Extensions
Prerequisites for Configuring Cisco Client Extensions
Configuring CCX Aironet IEs (GUI)
Viewing a Client’s CCX Version (GUI)
Configuring CCX Aironet IEs (CLI)
Viewing a Client’s CCX Version (CLI)
Client Profiling
Prerequisites for Configuring Client Profiling
Restrictions for Configuring Client Profiling
Configuring Client Profiling (GUI)
Configuring Client Profiling (CLI)
Configuring Custom HTTP Port for Profiling (GUI)
Configuring Custom HTTP Port for Profiling (CLI)
Client Count per WLAN
Restrictions for Setting Client Count for WLANs
Configuring the Client Count per WLAN (GUI)
Configuring the Maximum Number of Clients per WLAN (CLI)
Configuring the Maximum Number of Clients for each AP Radio per WLAN (GUI)
Configuring the Maximum Number of Clients for each AP Radio per WLAN (CLI)
Limit Clients per WLAN per AP Radio
Limit Clients per WLAN per AP Radio (GUI)
Limit Clients per WLAN per AP Radio (CLI)
Per-WLAN 802.11ax Mode
Configuring Per-WLAN 802.11ax Mode (GUI)
Configuring Per–WLAN 802.11ax Mode (CLI)
Verifying Per-WLAN 802.11ax Mode (CLI)
Disabling Coverage Hole Detection per WLAN
Disabling Coverage Hole Detection on a WLAN (GUI)
Disabling Coverage Hole Detection on a WLAN (CLI)
WLAN Interfaces
Multicast VLAN
Configuring a Multicast VLAN (GUI)
Configuring a Multicast VLAN (CLI)
WLAN Timeouts
Client Exclusion Timeout
Configuring Client Exclusion Timeout (CLI)
Session Timeouts
Configuring a Session Timeout (GUI)
Configuring a Session Timeout (CLI)
User Idle Timeout
Configuring User Idle Timeout (GUI)
Configuring User Idle Timeout (CLI)
User Idle Timeout per WLAN
Configuring Per-WLAN User Idle Timeout (GUI)
Configuring Per-WLAN User Idle Timeout (CLI)
Address Resolution Protocol Timeout
Configuring ARP Timeout (GUI)
Configuring ARP Timeout (CLI)
WLAN Security
Layer 2 Security
Prerequisites for Layer 2 Security
MAC Filtering of WLANs
Restrictions for MAC Filtering
Enabling MAC Filtering
Local MAC Filters
Prerequisites for Configuring Local MAC Filters
Configuring Local MAC Filters (CLI)
802.11w
Restrictions for 802.11w
Configuring 802.11w (GUI)
Configuring 802.11w (CLI)
Fast Secure Roaming
802.11r Fast Transition
Restrictions for 802.11r Fast Transition
Configuring 802.11r Fast Transition (GUI)
Configuring 802.11r Fast Transition (CLI)
Troubleshooting 802.11r BSS Fast Transition
802.11i Sticky Key Caching
Restrictions for Sticky Key Caching
Configuring Sticky Key Caching (CLI)
Cisco Centralized Key Management (CCKM)
Wi-Fi Protected Areas (WPA)
WPA1 and WPA2
Configuring WPA1+WPA2 (GUI)
Configuring WPA1+WPA2 (CLI)
WPA3
Configuring WPA3 (GUI)
Configuring SAE Mixed Mode (WPA2+WPA3) (GUI)
Configuring WPA3 (CLI)
Configuring SAE Anticlogging (CLI)
Configuring SAE AntiClogging for FlexConnect APs (CLI)
Configuring SAE Exclusion List (CLI)
Configuring Enhanced Open (GUI)
Configuring Enhanced Open (CLI)
Configuring Opportunistic Wireless Encryption Transition Mode (GUI)
Configuring Opportunistic Wireless Encryption Transition Mode (CLI)
Monitoring WPA3 Configuration on APs (CLI)
Monitoring WPA3 Configuration on the Controller (CLI)
Troubleshooting WPA3 Configuration on the Controller (CLI)
Wireless Encryption Protocol (WEP)
WLAN for Static WEP
Restrictions for Configuring Static WEP
Configuring Dynamic WEP (CLI)
MAC Authentication Failover to 802.1X Authentication
Configuring MAC Authentication Failover to 802.1x Authentication (GUI)
Configuring MAC Authentication Failover to 802.1X Authentication (CLI)
Identity PSK
Prerequisites for Identity PSK
Configuring Identity PSK (GUI)
Configuring Identity PSK (CLI)
Random MAC Filtering
Configuring Random MAC Filtering (GUI)
Configuring Random MAC Filtering (CLI)
Verifying Random MAC Filtering (CLI)
Verifying Random MAC Filtering (AP-CLI)
Layer 3 Security
Information About Web Authentication
Prerequisites for Configuring Web Authentication on a WLAN
Restrictions for Configuring Web Authentication on a WLAN
Default Web Authentication Login Page
Choosing the Default Web Authentication Login Page (GUI)
Choosing the Default Web Authentication Login Page (CLI)
Example: Modified Default Web Authentication Login Page Example
Using a Customized Web Authentication Login Page from an External Web Server
Information About Customized Web Authentication Login Page
Choosing a Customized Web Authentication Login Page from an External Web Server (GUI)
Choosing a Customized Web Authentication Login Page from an External Web Server (CLI)
Example: Creating a Customized Web Authentication Login Page
Downloading a Customized Web Authentication Login Page
Prerequisites for Downloading a Customized Web Authentication Login Page
Downloading a Customized Web Authentication Login Page (GUI)
Downloading a Customized Web Authentication Login Page (CLI)
Example: Customized Web Authentication Login Page
Verifying the Web Authentication Login Page Settings (CLI)
Assigning Login, Login Failure, and Logout Pages per WLAN
Assigning Login, Login Failure, and Logout Pages per WLAN (GUI)
Assigning Login, Login Failure, and Logout Pages per WLAN (CLI)
Captive Network Assistant Bypass
Configuring Captive Bypassing (CLI)
Configuring Captive Network Assistant Bypass per WLAN (GUI)
Configuring Captive Network Assistant Bypass per WLAN (CLI)
Fallback Policy with MAC Filtering and Web Authentication
Configuring a Fallback Policy with MAC Filtering and Web Authentication (GUI)
Configuring a Fallback Policy with MAC Filtering and Web Authentication (CLI)
Central Web Authentication
Authentication of Sleeping Clients
Restrictions for Authenticating Sleeping Clients
Configuring Authentication for Sleeping Clients (GUI)
Configuring Authentication for Sleeping Clients (CLI)
Authenticating Sleeping Clients on L2+L3 Enabled WLANs
Configuring Sleeping Client Authentication on L2+L3 Enabled WLANs (GUI)
Configuring Sleeping Client Authentication on L2+L3 Enabled WLANs (CLI)
Web Redirect with 802.1X Authentication
Conditional Web Redirect
Splash Page Web Redirect
Configuring the RADIUS Server (GUI)
Configuring Web Redirect
Configuring Web Redirect (GUI)
Configuring Web Redirect (CLI)
Web Authentication Proxy
Configuring the Web Authentication Proxy (GUI)
Configuring the Web Authentication Proxy (CLI)
Supporting IPv6 Client Guest Access
EAP and AAA Servers
802.1X and Extensible Authentication Protocol
LDAP
Configuring LDAP (GUI)
Configuring LDAP (CLI)
Local EAP
Restrictions for Local EAP
Configuring Local EAP (GUI)
Configuring Local EAP (CLI)
Local Network Users on Controller
Configuring Local Network Users for the Controller (GUI)
Configuring Local Network Users for the Controller (CLI)
Uploading PACs for EAP-FAST
Uploading PACs (GUI)
Uploading PACs (CLI)
Advanced WLAN Security
AAA Override
Restrictions for AAA Override
Updating the RADIUS Server Dictionary File for Proper QoS Values
Configuring AAA Override (GUI)
Configuring AAA Override (CLI)
ISE NAC Support
Device Registration
Central Web Authentication
Local Web Authentication
Guidelines and Restrictions on ISE NAC Support
Configuring ISE NAC Support (GUI)
Configuring ISE NAC Support (CLI)
Enabling ISE NAC on a WPA/WPA2-PSK WLAN
Information About Enabling ISE NAC on a WPA and WPA2-PSK WLAN
Enabling ISE NAC on WPA/WPA2-PSK WLAN (GUI)
Client Exclusion Policies
Configuring Client Exclusion Policies (GUI)
Configuring Client Exclusion Policies (CLI)
Configuring Client Exclusion Policies for a WLAN (GUI)
Configuring Client Exclusion Policies for a WLAN (CLI)
Wi-Fi Direct Client Policy
Restrictions for the Wi-Fi Direct Client Policy
Configuring the Wi-Fi Direct Client Policy (GUI)
Configuring the Wi-Fi Direct Client Policy (CLI)
Monitoring and Troubleshooting the Wi-Fi Direct Client Policy (CLI)
Peer-to-Peer Blocking
Restrictions on Peer-to-Peer Blocking
Configuring Peer-to-Peer Blocking (GUI)
Configuring Peer-to-Peer Blocking (CLI)
Peer-to-Peer Blocking Using IPSK Tags
Local Policies
Guidelines and Restrictions for Local Policy Classification
Local Policy—Best Practices
Configuring Local Policies (GUI)
Configuring Local Policies (CLI)
Updating Organizationally Unique Identifier List
Updating Organizationally Unique Identifier List (GUI)
Updating Organizationally Unique Identifier List (CLI)
Updating Device Profile List
Updating Device Profile List (GUI)
Updating Device Profile List (CLI)
Wired Guest Access
Prerequisites for Configuring Wired Guest Access
Restrictions for Configuring Wired Guest Access
Configuring Wired Guest Access (GUI)
Configuring Wired Guest Access (CLI)
Client Roaming
Fast SSID Changing
Configuring Fast SSID Changing (GUI)
Configuring Fast SSID Changing (CLI)
802.11k Neighbor List and Assisted Roaming
Restrictions for Assisted Roaming
Configuring Assisted Roaming (GUI)
Configuring Assisted Roaming (CLI)
802.11v
Prerequisites for Configuring 802.11v
Configuring 802.11v Network Assisted Power Savings (CLI)
Monitoring 802.11v Network Assisted Power Savings (CLI)
Configuration Examples for 802.11v Network Assisted Power Savings
Enabling 802.11v BSS Transition Management
Optimized Roaming
Restrictions for Optimized Roaming
Configuring Optimized Roaming (GUI)
Configuring Optimized Roaming (CLI)
Band Select
Band Select Algorithm
Restrictions for Band Selection
Configuring Band Selection (GUI)
Configuring Band Selection (CLI)
Wi-Fi Alliance Agile Multiband
Restrictions for Wi-Fi Alliance Agile Multiband
Configuring Wi-Fi Alliance Agile Multiband (CLI)
DHCP
Information about Dynamic Host Configuration Protocol
Internal DHCP Servers
External DHCP Servers
DHCP Assignments
DHCP Proxy Mode versus DHCP Bridging Mode
DHCP Proxy Mode
Restrictions on Using DHCP Proxy
Configuring DHCP Proxy (GUI)
Configuring DHCP Proxy (GUI)
Configuring DHCP Proxy (CLI)
Configuring DHCP Proxy (CLI)
Configuring a DHCP Timeout (GUI)
Configuring a DHCP Timeout (CLI)
DHCP Option 82
Restrictions on DHCP Option 82
Configuring DHCP Option 82 (GUI)
Configuring DHCP Option 82 (CLI)
Configuring DHCP Option 82 Insertion in Bridge Mode (CLI)
DHCP Option 82 Link Select and VPN Select Suboptions
DHCP Link Select
DHCP VPN Select
Mobility Considerations
Prerequisites for DHCP Option 82 Link Select and VPN Select
Configuring DHCP Option 82 Link Select and VPN Select (GUI)
Configuring DHCP Option 82 Link Select and VPN Select (CLI)
Internal DHCP Server
Restrictions for Configuring Internal DHCP Server
Configuring DHCP Scopes (GUI)
Configuring DHCP Scopes (CLI)
Configuring DHCP Per WLAN (GUI)
Configuring DHCP Per WLAN (CLI)
DHCP Release Override on Cisco APs
Debugging DHCP (CLI)
Client Data Tunneling
Ethernet over GRE Tunnels
Restrictions for EoGRE Tunneling
Configuring EoGRE on the Controller (GUI)
Configuring EoGRE on the Controller (CLI)
Configuring EoGRE for FlexConnect APs (GUI)
Configuring EoGRE for FlexConnect APs (CLI)
One-to-One Mapping of WLAN with EoGRE VLAN (GUI)
One-to-One Mapping of WLAN with EoGRE VLAN (CLI)
Proxy Mobile IPv6
Restrictions on Proxy Mobile IPv6
Configuring Proxy Mobile IPv6 (GUI)
Configuring Proxy Mobile IPv6 (CLI)
AP Groups
Access Point Groups
Restrictions for Configuring Access Point Groups
Configuring Access Point Groups
Creating Access Point Groups (GUI)
Creating Access Point Groups (CLI)
Viewing Access Point Groups (CLI)
802.1Q-in-Q VLAN Tagging
Restrictions for 802.1Q-in-Q VLAN Tagging
Configuring 802.1Q-in-Q VLAN Tagging (GUI)
Configuring 802.1Q-in-Q VLAN Tagging (CLI)
Captive Portal Configuration for AP Groups
Restrictions for Captive Portal Configuration for AP Groups
Configuring Captive Portal for an AP Group (GUI)
Configuring Captive Portal for an AP Group (CLI)
Per AP Group NTP Server
Guidelines and Restrictions for Per AP Group NTP Server
Configuring a Per-AP Group NTP Server (GUI)
Mapping an AP Group with a Per-AP Group NTP Server
Configuring a Per-AP Group NTP Server (CLI)
Monitoring Per-AP Group NTP Server Configuration
Workgroup Bridges
Cisco Workgroup Bridges
Guidelines and Restrictions for Cisco Workgroup Bridges
Workgroup Bridge (WGB) Downstream Broadcast On Multiple VLANs
Reliable Transmission of Downstream Broadcast and Multicast with Multiple VLAN Support
Reliable WGB Downstream Multicast and Broadcast on Multiple VLANs
QoS Behavior
Cisco Wireless Controller (WLC) Configuration
WGB Configuration
Troubleshooting Reliable Broadcast
Troubleshooting Reliable Multicast
Reliable WGB Downstream Broadcast for Multiple VLANs
Cisco Wireless Controller (WLC) Configuration
WGB Configuration
Troubleshooting Reliable Broadcast
WGB M1 and M3 Timeout Enhancement
Configuration for IOS WGB
Troubleshooting
Parallel Redundancy Protocol Enhancement on AP and WGB
Verifying the PRP Configurations
Dual Radio Parallel Redundancy Protocol Enhancement on WGB
Sample Network Configuration
Configuration of Roaming Coordination on a Single WGB
WLC Configurations
Enabling PRP Under WLAN by CLI
Enabling PRP Under WLAN by GUI
Enabling Multiple Vlan Support by CLI
Enabling Multiple Vlan Support by GUI
WGB Configurations
Enabling PRP Mode on WGB
Submode PRP Configuration Commands
Configuring Dummy IP Address for Radio Interface
Configuring Vlan for BVI Under PRP Mode
Configuration Example of WGB
Aggregated Switch Configuration
PRP Switch Configuration
Verifying the Configuration
Debug Commands
DLEP Client Support on WGB
Configuring the Physical Interface
Configuring DLEP Local TCP Port and Server Address
Configuring Optional DLEP Timers
Configuring Heartbeat Timer
Configuring Neighbor Update Interval
Configuring DLEP Neighbors
Configuring Neighbor MAC Address
(Optional) Configuring RSSI Threshold and CDR Threshold
Verifying DLEP Configuration
Displaying DLEP Configuration
Displaying DLEP Peer Information
Displaying DLEP Neighbors
Displaying DLEP Client Counters
Debug Commands
Configuration Example
WLC Configuration
WGB Configuration
ESR Configuration
ISR-G2 Configuration
Viewing the Status of Workgroup Bridges (GUI)
Viewing the Status of Workgroup Bridges (CLI)
Debugging WGB Issues (CLI)
Non-Cisco Workgroup Bridges
Restrictions for Non-Cisco Workgroup Bridges
Cisco Wave 2 Access Points as Workgroup Bridges
Guidelines and Restrictions on Cisco Wave 2 Access Points as Workgroup Bridges
Configuring Cisco Wave 2 Access Points Image (CLI)
Configuring Cisco Wave 2 Access Points as Workgroup Bridge (CLI)
Configuring a Dot1X Credential (CLI)
Configuring an EAP Profile (CLI)
Configuring Manual-Enrollment of a Trustpoint for Workgroup Bridge (CLI)
Configuring Auto-Enrollment of a Trustpoint for Workgroup Bridge (CLI)
Configuring Manual Certificate Enrollment Using TFTP Server (CLI)
Importing the PKCS12 format certificates from the TFTP server (CLI)
Configuring an SSID Profile (CLI)
Configuring Radio Interface for Workgroup Bridges (CLI)
Configuring Workgroup Bridge Timeouts (CLI)
Configuring Bridge Forwarding for Workgroup Bridge (CLI)
Software-Defined Access Wireless
Introduction to Software-Defined Access Wireless
AP Bring-up Process
Onboarding the Wireless Clients
Platform Support
Migration From Converged Access
Restrictions
Additional References
Configuring SD-Access Wireless (CLI)
Enabling SD-Access Wireless (GUI)
Configuring SD-Access Wireless VNID (GUI)
Configuring SD-Access Wireless WLAN (GUI)
Configuring DNS Access Control List on SD-Access (GUI)
Configuring Access Control List Templates (GUI)
FlexConnect
FlexConnect
FlexConnect Overview
FlexConnect Authentication Process
FlexConnect Switching Modes
FlexConnect Operation Modes
FlexConnect VLANs and ACLs
Central DHCP Server for FlexConnect
Guidelines and Restrictions on FlexConnect
Configuring FlexConnect
Configuring the Switch at a Remote Site
Configuring the Controller for FlexConnect
Configuring the Controller for FlexConnect for a Centrally Switched WLAN Used for Guest Access
Configuring the Controller for FlexConnect (GUI)
Configuring the Controller for FlexConnect (CLI)
Configuring an Access Point for FlexConnect
Configuring an Access Point for FlexConnect (GUI)
Configuring an Access Point for FlexConnect (CLI)
Configuring an Access Point for Local Authentication on a WLAN (GUI)
Configuring an Access Point for Local Authentication on a WLAN (CLI)
Configuring FlexConnect Ethernet Fallback
Information About FlexConnect Ethernet Fallback
Restrictions for FlexConnect Ethernet Fallback
Configuring FlexConnect Ethernet Fallback (GUI)
Configuring FlexConnect Ethernet Fallback (CLI)
VideoStream for FlexConnect
Information About VideoStream for FlexConnect
Configuring VideoStream for FlexConnect (GUI)
Configuring VideoStream for FlexConnect (CLI)
Viewing and Debugging Media Streams
FlexConnect+Bridge Mode
Information about Flex+Bridge Mode
Configuring Flex+Bridge Mode (GUI)
Configuring Flex+Bridge Mode (CLI)
FlexConnect Groups
Information About FlexConnect Groups
FlexConnect Groups and VLAN Support
IP-MAC Context Distribution for FlexConnect Local Switching Clients
Guidelines and Restrictions for IP-MAC Context Distribution for FlexConnect Local Switching Clients
Configuring IP-MAC Context Distribution For FlexConnect Local Switching Clients (GUI)
Configuring IP-MAC Context Distribution For FlexConnect Local Switching Clients (CLI)
FlexConnect Groups and Backup RADIUS Servers
FlexConnect Groups and Fast Secure Roaming
FlexConnect Groups and Local Authentication Server
Default FlexGroup
Restrictions for FlexConnect Groups
Configuring FlexConnect Groups (GUI)
Configuring FlexConnect Groups (CLI)
Moving APs from a Default FlexConnect Group to Another FlexConnect Group (GUI)
Viewing APs in a Default FlexGroup (GUI)
Viewing Default FlexGroup Details (CLI)
VLAN-ACL Mapping
Configuring VLAN-ACL Mapping on FlexConnect Groups (GUI)
Configuring VLAN-ACL Mapping on FlexConnect Groups (CLI)
Viewing VLAN-ACL Mappings (CLI)
WLAN-VLAN Mapping
Configuring WLAN-VLAN Mapping on FlexConnect Groups (GUI)
Configuring WLAN-VLAN Mapping on FlexConnect Groups (CLI)
OfficeExtend Access Points
Implementing Security
Configuring OfficeExtend Access Points
Configuring OfficeExtend Access Points (GUI)
Configuring OfficeExtend Access Points (CLI)
Configuring a Personal SSID on an OfficeExtend Access Point
Viewing OfficeExtend Access Point Statistics
Viewing Voice Metrics on OfficeExtend Access Points
Network Diagnostics
Running Network Diagnostics (GUI)
Running Network Diagnostics on the Controller
Running Network Diagnostics (CLI)
Remote LANs
Configuring a Remote LAN (GUI)
Configuring a Remote LAN (CLI)
Configuring IEEE 802.1X Authentication Modes (CLI)
Enabling IEEE 802.1X Authentication in Cisco WLC (GUI)
FlexConnect AP Image Upgrades
Restrictions on FlexConnect AP Image Upgrades
Configuring FlexConnect AP Upgrades (GUI)
Configuring FlexConnect AP Upgrades (CLI)
FlexConnect AP Easy Admin
Configuring FlexConnect AP Easy Admin on the Controller (GUI)
Configuring FlexConnect AP Easy Admin on the Controller (CLI)
WeChat Client Authentication
Restrictions on WeChat Client Authentication
Configuring WeChat Client Authentication on WLC (GUI)
Configuring WeChat Client Authentication on WLC (CLI)
Authenticating Client Using WeChat App for Mobile Internet Access (GUI)
Authenticating Client Using WeChat App for PC Internet Access (GUI)
Lawful Interception of Traffic
Restrictions on Lawful Interception of Traffic
Configuring Lawful Interception of Traffic on a Cisco Controller (CLI)
Viewing and Debugging Lawful Interception of Traffic on a Cisco Access Point (CLI)
FlexConnect Security
FlexConnect Access Control Lists
Restrictions for FlexConnect Access Control Lists
Configuring FlexConnect Access Control Lists (GUI)
Configuring FlexConnect Access Control Lists (CLI)
Viewing and Debugging FlexConnect Access Control Lists (CLI)
Configuring CAPWAP Message Aggregation (CLI)
Authentication, Authorization, Accounting Overrides
Restrictions on AAA Overrides for FlexConnect
Configuring AAA Overrides for FlexConnect on an Access Point (GUI)
Configuring AAA Overrides for FlexConnect on an Access Point (CLI)
Configuring VLAN Overrides for FlexConnect on an Access Point (CLI)
Configuring QoS for FlexConnect on an Access Point (CLI)
Software Defined Access and FlexConnect Post Authentication IPv6 ACL Support
Applying FlexConnect Access Control Lists (GUI)
Configuring Local Web Authentication for a WLAN with SDA and FlexConnect (GUI)
Configuring Local Web Authentication from FlexConnect Groups for FlexConnect APs (GUI)
Configuring Central Web Authentication and Post Authentication ACL from FlexConnect Groups for FlexConnect APs (GUI)
Configuring Post-Authentication Fabric ACL for a WLAN (GUI)
Applying FlexConnect Access Control Lists (CLI)
Monitoring the Network
Monitoring the Controller
Viewing System Resources
Viewing System Resources (GUI)
Viewing System Resources (CLI)
System and Message Logging
System and Message Logging
Configuring System and Message Logging (GUI)
Viewing Message Logs (GUI)
Configuring System and Message Logging (CLI)
Viewing System and Message Logs (CLI)
Viewing Access Point Event Logs
Information About Access Point Event Logs
Viewing Access Point Event Logs (CLI)
Troubleshooting
Debugging on Cisco Wireless Controllers
Troubleshooting AAA RADIUS Interactions for WLAN Authentication
Understanding Debug Client on Wireless Controllers
Deauthenticating Clients
Deauthenticating Clients (GUI)
Deauthenticating Clients (CLI)
Using the CLI to Troubleshoot Problems
Potential Reasons for Controller Reset
Controller Unresponsiveness
Upload Logs and Crash Files
Uploading Logs and Crash Files (GUI)
Uploading Logs and Crash Files (CLI)
Uploading Core Dumps from the Controller
Configuring the Controller to Automatically Upload Core Dumps to an FTP Server (GUI)
Configuring the Controller to Automatically Upload Core Dumps to an FTP Server (CLI)
Uploading Core Dumps from Controller to a Server (CLI)
Uploading Crash Packet Capture Files
Restrictions for Uploading Crash Packet Capture Files
Uploading Crash Packet Capture Files (GUI)
Uploading Crash Packet Capture Files (CLI)
Monitoring Memory Leaks
Monitoring Memory Leaks (CLI)
Troubleshooting Memory Leaks
Debugging on Cisco Access Points
Troubleshooting Access Points Using Telnet or SSH
Troubleshooting Access Points Using Telnet or SSH (GUI)
Troubleshooting Access Points Using Telnet or SSH (CLI)
Sending Commands to Access Points
Understanding How Access Points Send Crash Information to the Controller
Understanding How Access Points Send Radio Core Dumps to the Controller
Retrieving Radio Core Dumps (CLI)
Uploading Radio Core Dumps (GUI)
Uploading Radio Core Dumps (CLI)
Viewing the AP Crash Log Information
Viewing the AP Crash Log information (GUI)
Viewing the AP Crash Log information (CLI)
Viewing MAC Addresses of Access Points
Disabling the Reset Button on Access Points to Lightweight Mode
Viewing Access Point Event Logs
Information About Access Point Event Logs
Viewing Access Point Event Logs (CLI)
Troubleshooting Clients on FlexConnect Access Points
Troubleshooting OfficeExtend Access Points
Troubleshooting Common Problems with OfficeExtend Access Points
Link Test
Performing a Link Test (GUI)
Performing a Link Test (CLI)
Packet Capture
Using the Debug Packet Logging Facility
Configuring the Debug Facility (CLI)
Wireless Sniffing
Prerequisites for Wireless Sniffing
Restrictions on Wireless Sniffing
Configuring Sniffing on an Access Point (GUI)
Configuring Sniffing on an Access Point (CLI)