Sewing from square one: turn simple fabric squares into 20 projects 9781589232754, 1589232755, 9781616733049, 1616733047
Author is Home Shopping Network's favorite sewing host. Each beginner-level project begins with a square of fabric.
213 78 15MB
English Pages 96 pages: color illustrations [98] Year 2006
Recommend Papers
File loading please wait...
Citation preview
SF Square One cover/M8
26/01/2006
3:12 PM
Page 1
AS SEEN ON THE HOME SHOPPING NETWORK DARLENE
Sewing from
CAHILL
Square One TURN SIMPLE FABRIC SQUARES INTO 20 PROJECTS
■ Fashions and accessories like a poncho, scarf, and blouse ■ Home decorating like placemats, decorator pillow, and duvet cover ■ Crafts like book covers, warming rice bag, and baby blanket
Sewing is fun, even if you’re starting from square one! ■ ■ ■ ■
Simple instructions with how-to photos Pick up skills and tips as you sew No patterns needed Personalize your projects with your favorite fabrics and finishing touches
Sewing from Square One
Sewing is magical – you can turn fabric squares into real projects to wear, give, or decorate your home!
DARLENE CAHILL loves sharing her sewing projects and tips as a host for the Home Shopping Network.
ISBN – 13: 978-1-58923-275-4 ISBN – 10: 1-58923-275-5 $18.95 US £9.99 UK $25.95 CAN
EAN
UPC
CATEGORY: Crafts
www.creativepub.com
DARLENE CAHILL
Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 425.5(w)274.5(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:93985.C1 D/O : 26.01.06 Co: CM8)
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 1
Sewing from
Square One
p1 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 2
p2 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp01-27/M8
26/01/2006
3:01 PM
Page 3
Sewing from
Square One TURN SIMPLE FABRIC SQUARES INTO 20 PROJECTS
DARLENE CAHILL
Chanhassen, MN
p3 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:93985.C1 D/O : 26.01.06 Co: CM8)
black text
SFS1.pp01-27/M8
26/01/2006
3:01 PM
Page 4
Acknowledgments My heartfelt thanks to the wonderful friends and colleagues who have helped create this book, including the CPi staff, photographer Tim Boyles, my sewing assistant Sandy Young, and Lorraine Montgomery for organizing and support of many kinds. Thank you, Euro-pro sewing machines and the Home Shopping Network, for the many opportunities you have given me. A special thank you to my wonderful husband George Cahill for gifting me with the name of the book and heaping lavish words of encouragement on me to follow through and complete this project.
Library of Congress Cataloging-inPublication Data
Copyright 2006 Creative Publishing international, Inc. 18705 Lake Drive East Chanhassen, Minnesota 55317 1-800-328-3895 www.creativepub.com All rights reserved President/CEO: Ken Fund Executive Editor: Alison Brown Cerier Senior Editor: Linda Neubauer Photo Stylist: Joanne Wawra Creative Director: Brad Springer Photo Art Director: Tim Himsel Photographer: Steve Galvin Author portrait photographer: Tim Boyles Production Manager: Linda Halls Cover Design: Lois Stanfield Interior Design: Terry Patton Rhoads Printed in USA 10 9 8 7 6 5 4 3 2 1
Cahill, Darlene Sewing from square one : 20 pattern-free projects you can do / Darlene Cahill. p. cm. ISBN-13: 978-1-58923-275-4 (soft cover) ISBN-10: 1-58923-275-5 (soft cover) 1. Sewing. 2. Household linens. 3. Dress accessories. I. Title. TT705.C32 2006 646.2--dc22 2005037242 Due to differing conditions, materials, and skill levels, the publisher and various manufacturers disclaim any liability for unsatisfactory results or injury due to improper use of tools, materials, or information in this publication. All rights reserved. No part of this work covered by the copyrights hereon may be reproduced or used in any form or by any means—graphic, electronic, or mechanical, including photocopying, recording, taping of information on storage and retrieval systems—without the written permission of the publisher.
p4 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:93985.C1 D/O : 26.01.06 Co: CM8)
black text
Job no Scn : # Dept :
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 5
"
Contents Sewing is Fun! _ _ _ _ _ _ _ _ 7 Reversible Placemats _ _ _ _ _ 9 Napkins and Table Topper _ 13 Duvet Cover _ _ _ _ _ _ _ _ _ 17 Pillow Shams _ _ _ _ _ _ _ _ 21 Decorator Pillow _ _ _ _ _ _ 25 Table Runners _ _ _ _ _ _ _ _ 29 Remote Control Holster _ _ 33 Posh Poncho _ _ _ _ _ _ _ _ 37 Handkerchief Skirt _ _ _ _ _ 41 Magic Yarn Scarf _ _ _ _ _ _ 45 Swimsuit Wrap _ _ _ _ _ _ _ 49 Tough Tote _ _ _ _ _ _ _ _ _ 53 Butterfly Blouse _ _ _ _ _ _ _ 57 Wine Gift Bags _ _ _ _ _ _ _ 61 Bouquet Sachet _ _ _ _ _ _ _ 65 Book Cover _ _ _ _ _ _ _ _ _ 69 Warming Rice Bag _ _ _ _ _ 73 Hanger Pockets _ _ _ _ _ _ _ 77 Napkin Tray _ _ _ _ _ _ _ _ _ 81 Fringed Fleece Baby Blanket 85 Some Basics _ _ _ _ _ _ _ _ _ 88 Sewing Terms _ _ _ _ _ _ _ _ 95
p5 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 6
Darlene Cahill has been the sewing expert at Home Shopping Network for more than nine years, demonstrating a multitude of products while sharing projects and tips with viewers. Her passion for sewing comes from years as a costume designer, dressmaker, and interior decorator. Darlene was also a singer/dancer/actress and she performed across a broad spectrum of the entertainment industry, from her own touring magical variety act to the CBS reality show Wickedly Perfect.
p6 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 7
"
Sewing Is Fun! My passion is showing people how much fun they can have sewing, even if they’ve never sewn before. For some years now, I’ve been on the Home Shopping Network, hosting programs about sewing machines and products. I show how to make creative projects and share lots of tips to make sewing easy and successful. I’ve written Sewing from Square One so you can join the fun, too. Here are twenty of my favorite quick-and-easy projects. Each starts with a square (or rectangle) of fabric— it’s magical how that square turns into anything from a napkin to a skirt! There are no curved seams to match, no complicated fitting, no patterns to buy. There are projects for home décor, apparel, and craft items you can sew for yourself or as gifts for your family and friends. The title Sewing from Square One also has a second meaning: you can start from square one, the very beginning, and make anything in this book. All you need are a conventional sewing machine and a few sewing supplies. (If you have a serger, feel free to use it for rolled hems or seam finishes, but it’s not necessary for these projects.) There are step-by-step directions with how-to photos. Each project includes a list of materials to buy or gather. And I share lots of my favorite sewing tips and tricks. A basics section beginning on page 88 covers fabrics, tools, and skills like sewing seams. I recommend reading through it before you start a project. While you are working on a project, if you come to a sewing term you don’t quite understand, just check the explanations at the back of the book. The most important thing is to have fun, from choosing the fabrics to adding your finishing touches. Get creative and personalize your projects with embellishments and decorative stitching. You’ll be amazed at what you can do.
p7 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 8
p8 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 9
"
Reversible Placemats Two placemats in one! Just flip over the placemat for a different look. You can even make one side with a holiday fabric and the other side for everyday suppers. The following instructions are for basic rectangular placemats. To give them a little padding and body, I’ve used prequilted fabric on one side. Placemats can be any shape, size, or style, depending on your table and personal taste. Cut off the four corners to make octagons, or round off the corners to ovals. If you like it, it’s perfect!
YOU’LL NEED Rotary cutter, cutting mat, and straightedge, optional
For two placemats: 1 ⁄ 2 yd. (0.5 m) fabric for placemat front
Iron and ironing board
1 ⁄ 2 yd. (0.5 m) prequilted cotton for placemat back
Pins
Tape measure or yardstick (meterstick)
Sewing machine
Thread Hand needle
Pencil or other fabric marker Scissors
9
p9 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp01-27/M8
17/01/2006
5:48 PM
LET’S GET SEWING
Page 10
Cut two rectangles of the front fabric and two of the back fabric, each 19" wide × 13" long (48.5 × 33 cm).
1
Stop stitching with the needle down in the fabric 1 ⁄ 2" (1.3 cm) from the corner. Raise the presser foot, turn the fabric, lower the presser foot, and continue sewing. Pivoting like this will give your placemat sharp, square corners.
4
1 4
Place a front and back right side together and pin around the edge every few inches.
2
Sew a 1 ⁄ 2" (1.3 cm) seam around the edge, starting just past the center of one long side.
3
Finish sewing the seam, pivoting at each corner as in step 4. Stop stitching 3" (7.5 cm) from where you started to leave an opening for turning the placemat right side out.
5
10
p10 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job n Scn : Dept
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 11
Trim the corners diagonally within 1 ⁄ 8" (3 mm) of the stitching at each corner, using scissors. This reduces the fabric bulk to make the corners nice and square.
6
Darlene’s Tips
Thread the machine with the top thread matching the placemat front and the bobbin thread matching the placemat back. Topstitch 1 ⁄ 2" (1.3 cm) from the edge all around the placemat.
8
■ You can use
one of your machine’s decorative stitches to topstitch the placemats.
Turn the placemat right side out and press the outer edge. Press the seam allowances toward the inside at the opening. Slipstitch the opening closed.
7
■ Before turning
the placemat right side out, press one upper seam allowance back. This will give you a neater edge on the outside.
8
Enjoy your placemats and have a wonderful celebration! 7
11
p11 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 12
p12 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 13
"
Napkins and Table Topper Cloth napkins make every meal seem special, and you can save trees, too! You can whip up a set of napkins with very little time or money. I think store-bought napkins are too small, so I super-size mine. A table topper is made the same way as a napkin, only larger. You can use a topper alone over a round table for a bistro effect, or put one over a plain tablecloth to add color and personality to a table. If your dining table is long, put two or three toppers down the center.
YOU’LL NEED 11⁄3 yd. (1.23 m) fabric for four napkins 1 yd. (0.92 m) fabric for table topper Tape measure or yardstick (meterstick) Pencil or other fabric marker Scissors Rotary cutter, cutting mat, and straightedge, optional Iron and ironing board Pins Thread Sewing machine
13
p13 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp01-27/M8
17/01/2006
5:48 PM
LET’S GET SEWING
Page 14
Cut four 21" (53.5 cm) squares for napkins. For a table topper, cut a square 1" (2.5 cm) larger than your desired finished size.
1
With the wrong side of the napkin or topper facing up, beginning along one side, fold the edge over 1 ⁄ 4" (6 mm) and crease the fold with your fin-
2
gers. Then fold the edge over 1⁄ 4" (6 mm) again, and crease, forming a double-fold hem. Sew along the inner fold of the hem all the way down the side, folding and fingerpressing as you go. Stop sewing 2" (5 cm) from the first corner with the needle down in the fabric.
3
3
14
p14
Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job n Scn : Dept
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 15
Fold in the hem to the corner. Then fold the corner diagonally 1 ⁄ 2" (1.3 cm) from the end creating a small triangle at the corner.
4
Darlene’s Tips
the needle down in the fabric, and raise the presser foot.
■ Always hold
the thread tails as you start to sew. This prevents threads from becoming tangled at the beginning of the stitching line and gives you a cleaner, more professional look. ■ Natural fibers 5
Turn the napkin or topper a quarter turn. Lower the presser foot and continue sewing, finger-pressing the double-fold hem as you go and forming miters at each corner.
6
When you reach the place where you started, just overlap a few stitches, and you’re done.
7 4
Finger-press the doublefold hem into the next side, including the folded triangle at the corner. Continue sewing along the first side until the needle penetrates the center fold of the mitered corner. Stop with
5
like linen, cotton, and cottonblended fabrics absorb liquids better than synthetic fabrics do, so they make better napkins. It is also much easier to finger-press the double-fold hems in naturalfiber fabrics. The only drawback is that cotton and linen napkins require pressing after laundering for a nice crisp look.
Now wasn’t that easy? Your table linens look very professional!
15
p15 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp01-27/M8
18/01/2006
9:01 AM
Page 16
p16 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 17
"
Duvet Cover A duvet cover is like a large pillowcase that covers a comforter. It can be difficult to buy just the right duvet cover for your bedroom, but now you can make your own. With a buttoned opening on the back, the duvet cover completely encloses the comforter, yet comes off easily for washing. The sewing steps are not difficult, but you’ll be working with a lot of fabric, so find a space to spread out. Fabrics are usually not wide enough to make a duvet cover with one width, so you will sew long pieces together. For a professional look, use one full width of fabric down the center of the duvet cover front and sew equal narrow strips to the sides. If you purchase a decorator print, buy one additional pattern repeat to make sure you will be able to match the design at the seams. The back, cut from two equal pieces of plain cotton fabric, can be sewn down the center.
YOU’LL NEED Twin size: 5 yd. (4.6 m) fabric for front 514⁄ yd. (4.8 m) fabric for back
For all sizes: Tape measure or yardstick (meterstick) Pencil or other fabric marker Scissors Rotary cutter, cutting mat, and straightedge, optional Iron and ironing board Pins Thread Sewing machine and button attachment presser foot Seam ripper Buttons
Standard/queen size: 5 1⁄2 yd. (5.05 m) fabric for front 5 3⁄ 4 yd. (5.3 m) fabric for back King size: 5 1⁄2 yd. (5.05 m) fabric, at least 54" (137 cm) wide, for front 5 3⁄4 yd. (5.3 m) fabric, at least 54" (137 cm) wide, for back
17
p17 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp01-27/M8
17/01/2006
5:48 PM
LET’S GET SEWING
Darlene’s Tips ■ If you want to make a duvet cover for a twin or standard size bed and you don’t have to match a print, plan the pieces so the seams fall at the edge of the bed rather than off the sides. Be sure to allow for seam allowances when cutting the pieces.
Page 18
Measure the length of your comforter and add 1" (2.5 cm) to determine how long to cut the pieces for the front. Mark the cut length of the first piece along the selvage. Then mark the cut locations for the second piece, beginning and ending at the same locations in the pattern repeat as the first piece. Carefully mark the lines across the entire fabric, making sure they are perpendicular to the selvages. When you are sure of your measurements and sure that the pattern will line up across the seams, cut the pieces.
1
Cut one of the front pieces in half on the lengthwise grain (parallel to the selvages).
2
Place a narrow piece over a full-width piece, right sides together, aligning the selvages. Fold back the upper selvage until the pattern matches. Adjust the top layer up or down so the pattern lines up exactly. Press the fold line. Then unfold and pin the layers together down the fold line.
3
Stitch the layers together, following the fold line. Remove the pins as you come to them.
4
Check that the pattern matches on the right side. Trim away the selvages, leaving 1 ⁄ 2" (1.3 cm) seam allowances.
5
Repeat steps 3 to 5 to join the other narrow strip to the opposite side of the full-width strip. Trim the sides of the duvet cover equally so the duvet cover front is 1" (2.5 cm) wider than the width of your comforter.
6
Cut the duvet cover back fabric in half on the crosswise grain (perpendicular to the selvages) to make two full-width pieces. Sew them together along one long edge. Trim the sides equally so the duvet cover back is 1" (2.5 cm) wider than your comforter.
7
Cut across the duvet cover back 16" (40.5 cm) from the top. Press under 1 ⁄ 2" (1.3 cm) on both cut edges. Then press under 2" (5 cm) and pin. Stitch along the inner folds of each piece to make hems.
8
18
p18 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : Dept :
SFS1.pp01-27/M8
06/02/2006
11:13 AM
Page 19
Darlene’s Tips
Mark buttonhole positions every 5" to 6" (12.7 to 15 cm) in the hem of the short piece. Sew buttonholes, following the instructions in your sewing machine manual.
9
Insert a pin across the end of a buttonhole. Using your seam ripper, cut the buttonhole open. The pin will prevent you from accidentally cutting too far.
10
Lap the hem of the short piece over the hem of the long piece. Baste the layers together at the sides. Mark through the buttonholes for button placement on the lower hem.
11
■ Large patterns
12
Button the duvet cover back pieces together. Center the front, facedown, over the back, aligning the upper edges. Trim away excess fabric on the bottom of the back. Pin the layers together on all four sides.
13
Sew a 1 ⁄ 2" (1.3 cm) seam around the outer edges, pivoting with the needle down in the fabric at the corners. Trim the seam allowances at the corners diagonally within 1⁄ 8" (3 mm) of the stitching.
14
Unbutton the duvet cover and turn it right side out. Press the outer edges. Insert your comforter and button the cover closed. Spread it on your bed and see how it changes the whole room!
15 11
Set the sewing machine to zigzag in place. Using the button attachment presser foot, sew buttons at the marks.
12
are easier to match but they require more fabric. Buy at least one extra repeat of the fabric to be sure you have enough to match the seams. ■ If you pur-
chased washable fabric and plan to wash the cover, you should launder and press the fabric before cutting the pieces. If you plan to dryclean the cover, you can start right away. ■ You can add a
decorator touch by stitching fabriccovered welting (also called piping) into the long seams and around the edges of your duvet cover. This will add interest, dimension, and contrast and may help to forgive a seam that isn’t matched to absolute perfection! (See pages 22 and 23 for how-to steps.)
Can you believe you did that? I can!
19
p19 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:93985.C1 D/O : 26.01.06 Co: CM8)
black text
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 20
p20 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 21
"
Pillow Shams Today’s bedding doesn’t seem complete without the addition of a coordinating sham. Shams dress the bed while they protect and hide the bed pillow. You can insert piping, fringe, or lace around the edge, depending on your décor. This design has a flange, an extension around the outer edge, which helps to make an upscale statement as it extends the size of the pillow.
YOU’LL NEED 1 yd. (0.92 m) decorator fabric for the front 1 yd. (0.92 m) coordinating fabric for the back 3 1 ⁄ 2 yd. (3.2 m) fabric-covered welting (piping) Tape measure or yardstick (meterstick) Pencil or other fabric marker Scissors Rotary cutter, cutting mat, and straightedge, optional Iron and ironing board Pins Thread Sewing machine and welting or zipper foot Standard size bed pillow
21
p21 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp01-27/M8
17/01/2006
5:48 PM
LET’S GET SEWING
Page 22
For a standard pillow size, cut a 33" × 26" (84 × 66 cm) rectangle of decorator fabric for the sham front. Cut two 20" × 26" (51 × 66 cm) rectangles of coordinating fabric for the sham back.
1
Place the two back pieces over the front piece, aligning the outer edges. Mark the two edges that overlap down the center of the back.
2
Fold under 1 ⁄ 2" (1.3 cm) twice on each marked edge and stitch along the inner fold to make a double-fold hem. Set the pieces aside.
3
Attach a welting or zipper foot to the machine. Machine-baste the welting to the edge of the sham front, matching the raw edges. Clip up to, but not through, the stitching on the welting at the corners, so the seam allowances will spread open to turn the corner. Where the ends overlap, turn back the fabric that covers the cording. Cut the cording so the ends just meet. Then wrap the fabric back over the cording, overlapping the ends, and finish stitching.
4
2
22
p22 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 23
Pin the sham back pieces over the front, right sides together, matching the outer edges and overlapping the hemmed edges down the middle.
5
Mark a line 2" (5 cm) from the welted edge all around the sham front. Pin along the line through both layers. Straight stitch over the marked line, pulling out the pins as you come to them. You just made a flanged edge!
8
Sew a 1 ⁄ 2" (1.3 cm) seam around the edge, still using the welting or zipper foot, and catching the welting between the front and back.
6
Darlene’s Tips ■ If your pillow
is quite plump, the back opening may gap apart. Stitch Velcro on the overlapping edges of the opening to keep them closed. ■ For a profes-
sional look, always center a printed design on your pillow sham.
8
6
Turn the sham right side out, and press.
7
Tuck the pillow into the sham through the opening in the back. Plump it up and prop it at the head of the bed.
9
Doesn’t your new sham look great? And think of the money you’ve saved!
23
p23 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 24
p24 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 25
"
Decorator Pillow Pillows are an easy, quick project for beginners. By simply sewing four straight lines and stuffing to your heart’s content, anyone of any age or skill level can enjoy the artistic satisfaction and money savings that come with making pillows. There is no right or wrong in the world of pillows. For me, the more embellishment, the better! This style features triangles made from, of course, squares.
YOU’LL NEED 1 ⁄ 2 yd. (0.5 m) decorator fabric in a lighter color or solid
Pencil or other fabric marker Scissors Rotary cutter, cutting mat, and straightedge, optional
1 ⁄ 2 yd. (0.5 m) decorator fabric in a darker color or print
Iron and ironing board
2 1 ⁄ 8 yd. (1.95 m) decorative cord welting, optional
Pins Thread
18" (46 cm) pillow form or bag of polyester fiberfill
Sewing machine and welting or zipper foot
Tape measure or yardstick (meterstick)
Hand needle
25
p25 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp01-27/M8
18/01/2006
9:01 AM
LET’S GET SEWING
Page 26
Cut a 13" (33 cm) square of each decorator fabric for the pieced front of the pillow. The pillow back will be cut in step 6.
1
Fold each square in half diagonally, and cut along the fold line. You now have four triangles, two of each fabric.
2
3
2
Pin two contrasting triangles, right sides together, along one 13" (33 cm) side, and stitch a 1 ⁄ 2" (1.3 cm) seam. Reverse the order of the fabrics and repeat with the remaining two triangles. You should now have two two-toned triangles that are opposites. Press the seam allowances open.
3
Pin the two pieced triangles, right sides together, on the long edge, being careful to match up the center seam exactly. Stitch a 1 ⁄ 2" (1.3 cm) seam to complete the pillow front. Press the seam allowances open.
4
4
26
p26 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job Scn Dep
SFS1.pp01-27/M8
17/01/2006
5:48 PM
Page 27
Mark the fabric edge 1 ⁄ 2" (1.3 cm) from each corner. From each mark, draw a line that tapers to the fabric edge 4" (10 cm) from the corner. Trim each corner on the lines. This will make the finished pillow appear more square and eliminate what I call “cat ear corners.”
5
Pin the pillow back over the front, right sides together, aligning the edges.
8
1 ⁄ 2"
Sew a (1.3 cm) seam around the edge, catching the welting between the layers. Pivot with the needle down in the fabric at each corner, and leave an 8" (20.5 cm) opening for turning.
9
Trim the corners diagonally to within 1 ⁄ 8" (3
10
mm) of the stitching. Turn the pillow cover right side out.
5
Using this pillow front as a pattern, cut one piece of fabric for the pillow back. To make a pillow without welting, omit step 7.
6
Attach a welting or zipper foot to the sewing machine. Machine-baste the welting to the edge of the pillow front. Where the ends overlap, recoil the cord plies to make the welting look continuous.
7
Insert a purchased pillow form or stuff the pillow with loose polyester fiberfill.
11
Darlene’s Tips ■ When match-
ing two seam lines that cross each other, pin the layers together directly into the center of the seam. Slow down the machine as you get close to the seams and make sure the seam allowances on the underside are still pressed open. Remove the pin just before you get to it. ■ Stuff balls of
fiberfill tightly into the corners of your pillow so they don’t get limp later. ■ Trim the edge
Pin the opening closed. Slipstitch the opening closed by hand.
12
Now kick back and enjoy your new creation!
of your pillow with brush fringe instead of welting, following the same steps. To keep the fringe under control, don’t remove the chainstitch on the fringe until you turn the pillow right side out. Then simply pull on the thread to release the chainstitch and fluff out the fringe.
27
p27 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp28-51/M8
17/01/2006
5:50 PM
Page 28
p28 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp28-51/M8
17/01/2006
5:50 PM
Page 29
"
Table Runners Add elegance or a holiday look to your dining table with a runner. You can either line the runner with a coordinating fabric or simply hem the sides. Both styles have pointed ends with tassels that can drape over the table edge or just extend to the sides in the center of your table. The unlined style is a good choice for firm fabrics like tapestries or brocades. Lining will give extra body to lightweight or slippery fabrics. Following the directions below, your table runner will be 13" (33 cm) wide and any length you wish. If you pick fabric that is 45" to 54" (115 to 137 cm) wide, you can cut three runners the length of your fabric. If your fabric is 60" (152.5 cm) wide, you can make four runners. Make matching runners for your dining table, a sofa table, and a buffet. Or make one for yourself and give the others as gifts. Grab a tape measure and measure the width, length, or diameter of your table, depending on which way you’d like your runner to, well . . . RUN!
YOU’LL NEED Decorator fabric, amount depends on length of runner
Scissors Rotary cutter, cutting mat, and straightedge, optional
Coordinating lightweight fabric (same amount) for a lined runner
Iron and ironing board Pins
Two tassels
Thread
Tape measure or yardstick (meterstick)
Sewing machine
Pencil or other fabric marker
Hand needle, for lined runner
29
p29 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp28-51/M8
17/01/2006
5:50 PM
LET’S GET SEWING
Page 30
Lined Table Runner Measure how long you want your table runner to be, including any amount you want to extend over the table edge, usually 8" (20.5 cm) at each end. Cut a rectangle 1" (2.5 cm) longer than the desired finished length and 14" (35.5 cm) wide.
1
Stitch a 1 ⁄ 2" (1.3 cm) seam around the runner through both layers, pivoting with the needle down in the fabric at the points and corners. Leave a 6" (15 cm) opening along one side for turning the runner right side out. Stitch again over the points to make sure the tassels are attached securely.
5
Mark the sides 7" (18 cm) from the ends; mark the center of the short ends. Draw lines from the side marks to the center, and cut the ends into points.
2
Use the runner front as a pattern to cut the runner lining.
3
Pin the runner front and lining right sides together. Pin a tassel at each point between the layers, with the top of the tassel 1 ⁄ 2" (1.3 cm) from the cut edges and the cord extending out.
4
5
Turn the runner right side out. Press. Slipstitch the opening closed.
6
30
p30 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : Dept :
SFS1.pp28-51/M8
17/01/2006
5:50 PM
Page 31
Unlined Table Runner Determine how long you want your table runner to be, including any amount you want to extend over the table edge, usually 8" (20.5 cm) at each end. Cut a rectangle 1" (2.5 cm) longer than the desired finished length and 15" (38 cm) wide.
1
snug against the fold with the top of the tassel 1 ⁄ 2" (1.3 cm) from the cut edges and the cord extending out. Stitch a 1 ⁄ 2" (1.3 cm) seam across the end. Backstitch at both ends, especially over the tassel cord.
4
Darlene’s Tips ■ For a tailored
look, instead of adding tassels, insert piping around the outer edge. Follow the directions on pages 22 and 23. ■ Instead of
tassels, stitch decorator fringe along the angled ends of the table runner.
Turn under the long edges 1 ⁄ 2" (1.3 cm) and press. Turn under 1 ⁄ 2" (1.3 cm) again and press again to form double-fold hems. Stitch along the inner fold on each hem.
2
■ If you are serg-
4
Trim off the folded corner diagonally to within 1 ⁄ 8" (3 mm) of the seam. Press the seam allowances open.
5
ing a rolled hem into the edges of your table runner, put woolly nylon thread in the upper looper with its tension set on zero. Shorten your stitch length. The hem will look fuller than a conventional satin stitch.
Repeat steps 3 to 5 on the opposite end of the runner. Turn the ends right side out and center the points. Press.
6 2
That’s all there is to it! Fold one narrow end in half, right sides together. Pin a tassel between the layers,
3
31
p31 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp28-51/M8
17/01/2006
5:50 PM
Page 32
p32 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp28-51/M8
17/01/2006
5:50 PM
Page 33
"
Remote Control Holster Ever find yourself shouting, “Where’s the remote?” Then this project is for you. This holster goes over the arm of a sofa or chair and down under the seat cushion so it stays put. You can make five narrow pockets for holding all your remotes or make some pockets different sizes for holding pens, a phone, or the television guide. Match the fabric color to the couch so it blends nicely with the décor of the room or use a contrasting fabric for a “here I am” statement. When it’s time to watch your favorite show, you’ll know exactly where the remote is.
YOU’LL NEED 1 1 ⁄ 4 yd. (1.15 m) decorator fabric 1 1 ⁄ 4 yd. (1.15 m) coordinating fabric for lining Tape measure or yardstick (meterstick) Pencil or other fabric marker Scissors Rotary cutter, cutting mat, and straightedge, optional Iron and ironing board Pins Thread Sewing machine Hand needle
33
p33 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp28-51/M8
17/01/2006
5:50 PM
LET’S GET SEWING
Page 34
Cut two rectangles of fabric 38" × 22" (96.5 × 56 cm), one for the backing and one for the lining. Cut two rectangles 7" × 22" (18 × 56 cm) for the pocket and pocket lining.
1
Pin the pocket to the lower edge of the backing piece, matching the bottom and sides. Machine-baste the pocket in place within the 1 ⁄ 2" (1.3 cm) seam allowance.
5
Pin the pocket and pocket lining right sides together. Stitch a 1 ⁄ 2" (1.3 cm) seam along one long edge. Press the seam allowances open.
2
Fold the pocket wrong sides together. Roll the layers between your thumb and forefinger to ease the stitching line to the very top, and press the upper edge.
3
5
Add decorative topstitching to the upper edge, sewing down and encasing the seam allowances.
4
Place the backing and backing lining right sides together, and pin around the edges, enclosing the pocket between the layers.
6
6
34
p34 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp28-51/M8
17/01/2006
5:50 PM
Page 35
Stitch a 1 ⁄ 2" (1.3 cm) seam around the edges, pivoting with the needle down in the fabric at the corners and leaving a 6" (15 cm) opening along the top center.
7
Darlene’s Tips
Stitch vertical lines through all the layers at the marks, using a decorative stitch or triple straight stretch stitch to divide the pocket into sections.
11
■ You can rein-
force the top of each stitching line on the pocket dividers with backstitching.
Trim the corners diagonally to within 1 ⁄ 8" (3 mm) of the stitching. Turn the remote holster right side out.
8
■ If 21" (53.5 cm)
is too wide for the arm of your sofa, customize the size to fit. Make fewer pockets, if necessary.
Press the remote holster. Slipstitch the opening closed.
9 10
Mark and pin every 4" (10 cm) across the top of the pocket, or wherever you want the pocket division lines to be.
■ Stitch up a
11
matching pillow to help tie your remote holster into your décor. ■ If the holster
Drape the remote holster over the arm of the sofa or chair and tuck the extension under the seat cushion.
12
slips from the weight of the remotes, use a strip of sticky Velcro along the end under the cushion.
12
Fill the pockets and settle in!
35
p35 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp28-51/M8
18/01/2006
9:02 AM
Page 36
p36 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp28-51/M8
17/01/2006
5:50 PM
Page 37
"
Posh Poncho Wear this flowing poncho over a camisole or a tank top. It is cut to drape on the bias, giving it a comfortable flow and a lyrical movement. For the most attractive drape, choose silk, chiffon, or crepe. Bead trim is the perfect finishing touch. If your fabric is 45" (115 cm) wide, your poncho will be shorter on one side, like this one. For a square poncho, buy fabric that is 54" to 60" (137 to 152.5 cm) wide.
YOU’LL NEED 7 ⁄ 8 yd. (0.8 m) sheer or semisheer fabric for outer poncho 7 ⁄ 8 yd. (0.8 m) matching solid fabric for lining 4 yd. (3.7 m) beaded trim Tape measure or yardstick (meterstick) Pencil or other fabric marker Scissors Rotary cutter, cutting mat, and straightedge, optional Iron and ironing board Dinner plate Pins Thread Sewing machine
37
p37 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp28-51/M8
17/01/2006
5:50 PM
LET’S GET SEWING
Page 38
Fold the outer fabric in half lengthwise with the selvages aligned. Cut the layers 23" (58.5 cm) long for a small size, 27" (68.5 cm) long for medium to large size, or 31" (78.5 cm) long for an extra-large size.
1
Mark off 12" (30.5 cm) along the rim of a dinner plate. Place the plate over one cut end of the fabric, with one mark on the cut edge and the other on the fold. Trace the rim
2
on the fabric, using a fabric marker. Cut on the line for a neckline opening. Repeat steps 1 and 2 with the lining fabric, but cut the lining 2" (5 cm) shorter and narrower than the outer fabric.
3
Trim away the selvages. Finish the lower edges of the lining and outer fabric with a narrow double-fold hem.
4
2
38
p38 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp28-51/M8
17/01/2006
5:50 PM
Page 39
Place the right side of the lining against the wrong side of the outer fabric. Stitch a 1 ⁄ 2" (1.3 cm) seam at the shoulder through all layers. Finish the seam allowances together by serging or zigzagging.
5
Sew the outer poncho and lining together along the neck edge with a serger, or bind the raw edges with bias binding made from the outer fabric, as for the Butterfly Blouse on page 59.
6
Pin beaded trim to the lower edges. Stitch the ribbon heading of the trim to the poncho, using a decorative stitch on your sewing machine.
7
Darlene’s Tips ■ Double-fold
hems on slippery and slinky fabrics can be tricky, so take your time. Other options include making a rolled hem with a serger, using the rolled hem foot on your conventional machine, or if you’re very ambitious, making a delicate hand-stitched rolled hem. ■ Don’t throw
your old soap away. Those narrow slivers make great marking tools in the sewing room.
7
5
Now put on your poncho for instant, casual chic!
39
p39 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp28-51/M8
18/01/2006
9:43 AM
Page 40
p40 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp28-51/M8
17/01/2006
5:50 PM
Page 41
"
Handkerchief Skirt Handkerchief skirts are so feminine and romantic. Elastic waists make them super-comfortable, and they fit any figure. Handkerchief skirts can be made of anything from lightweight denims to luscious silks and velvets. Wear them for casual or dress them up for sophistication with flair.
YOU’LL NEED 1 yd. (0.92 m) each of two coordinating lightweight fabrics 1 ⁄ 2" (1.3 cm) wide elastic, amount equal to waist measurement minus 4" (10 cm) Tape measure or yardstick (meterstick) Pencil or other fabric marker Scissors Rotary cutter, cutting mat, and straightedge, optional Iron and ironing board Pins Thread Sewing machine and rolled hem foot
41
p41 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp28-51/M8
17/01/2006
5:50 PM
LET’S GET SEWING
Page 42
Square up the cut edges of your fabric pieces so you have two rectangles the full width of the fabric and 36" (91.5 cm) long.
1
Fold the pieces in half, aligning the selvages, and layer one over the other.
2
Add 4" (10 cm) to your waist measurement and divide by 2. Stand your tape measure on edge in an arc with this measurement at the upper folded corner of the fabrics. Mark the line, and cut the fabrics.
3
Fold the underskirt right sides together, and sew the side seam from the waist opening to the selvages. Finish the seam allowances together by serging, zigzagging, or pinking. Alternatively, sew a French seam (page 58).
4
Repeat step 4 for the overskirt.
5 6
Time for a fitting. Pull the overskirt on up to your waist to check the size. If you can’t get it over your hips, cut the opening of both the overskirt and underskirt slightly larger. Put the overskirt, right side out, over the right side of the underskirt. Pin the layers together at the waist, with the seams opposite each other.
7
Serge or zigzag the waistline edges together, removing pins as you sew.
8
Overlap the ends of the elastic 1 ⁄ 2" (1.3 cm) and zigzag back and forth several times to secure the elastic into a circle.
9
3
42
p42 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp28-51/M8
18/01/2006
3:55 PM
Page 43
Pin the elastic to the inside of the waist, evenly distributing the fabric fullness.
10
Stitch the elastic to the skirt waist, using a zigzag stitch, multistitch zigzag, or serging. Stitch with the fabric on top, stretching the elastic to ease in the fabric fullness.
11
Turn under the waistline edge, encasing the elastic between the layers. Topstitch, using a stretch stitch, such as the multistitch zigzag set to its widest setting.
12
12
Using your machine’s rolled hem foot, hem the lower edges of both the overskirt and the underskirt. Refer to the photo on page 59, step 10. Alternatively, turn under the edge 1 ⁄ 4" (6 mm) and stitch close to the fold. Trim the fabric close to the stitching. Then turn under again and stitch again close to the fold to make a tiny double-fold hem.
13
11
Darlene’s Tips ■ Change the
look! Before sewing the waistlines together, try the skirts on and twist them around until you see the desired effect. You may want to cut the overskirt shorter than the underskirt, or cut one side shorter, for an asymmetrical look. Round the corners on one side, one layer, or all of the corners. Add a third layer. Use your imagination! ■ To help the fab-
ric feed smoothly through the rolled hem presser foot, hold the threads with your left hand and gently pull them as you begin to sew.
Put your skirt on and give it a twirl!
43
p43 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp28-51/M8
18/01/2006
9:43 AM
Page 44
p44 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp28-51/M8
17/01/2006
5:50 PM
Page 45
"
Magic Yarn Scarf You don’t have to knit or crochet to enjoy the newest yarns and threads that have interesting textures and color weaves. Now, with a straight stitch sewing machine, you can enjoy these wonderful yarns as you create a fantasy fibers scarf. This stand-alone accessory will be uniquely yours and no two will ever be identical. The magic is made possible by a wonderful sewing product called water-soluble stabilizer. It will hold yarns, ribbon, and other snippets in a “scarf sandwich” while you secure them with a grid of stitches. When you dip the scarf in water, the stabilizer dissolves, leaving you with a gorgeous new fashion accessory. Wear your creation around your neck, tied onto a handbag, or around your waist. But be prepared to make a few because once your friends see it and find out that you made it yourself, they’ll want one, too!
YOU’LL NEED 31⁄3 yd. (3.07 m) water-soluble stabilizer, 10" (25.5 cm) wide
Rotary cutter, cutting mat, and straightedge, optional
5 yd. (4.6 m) each of six different yarns or ribbons
Thread Iron
Four pieces of parchment paper, 163⁄ 8" × 243⁄ 8" (42 × 62 cm) or newspaper
Sewing machine Sink or bowl of water
Scissors
45
p45 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp28-51/M8
17/01/2006
5:50 PM
LET’S GET SEWING
Page 46
Cut two pieces of stabilizer, each 5 ft. (1.58 m) long.
1 2
Place two sheets of parchment paper or newspaper lengthwise on a hard, flat surface overlapping them slightly. (If you use a countertop, protect it by placing a blanket or towel under the paper because you will be ironing on the surface in a later step.) Place one strip of stabilizer on the parchment or newspaper.
Artfully arrange the remaining yarns or ribbons throughout the rectangle, some slightly overlapping the ribbon edging.
5
3
Arrange narrow ribbon or thick yarn over the stabilizer near the edge to form the scarf outline.
4
5
Cover the fiber collage with the second stabilizer strip, matching the edges.
6
Place parchment paper or newspaper over the fiber collage sandwich.
7
46
p46 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp28-51/M8
17/01/2006
5:50 PM
Page 47
Press the entire sandwich, holding the iron in place for four seconds and then lifting it to move to a new position. Don’t slide the iron, and be sure it doesn’t come in contact with the stabilizer. Flip the sandwich and press again on the reverse side, making sure the edges of stabilizer have adhered to each other. Use a little steam, if necessary.
8
Turn the scarf and stitch crosswise lines about 1" (2.5 cm) apart over the entire scarf, to complete the stitching grid.
10
Using a new needle, stitch around the edge of the scarf, catching the ribbon or yarn outline. Then stitch lengthwise lines, about 1" (2.5 cm) apart over the entire scarf. If your machine has a quilting guide, attach it to the presser foot to help you stitch an even 1" (2.5 cm) grid.
■ You can include
snippets of fabric, silk flower petals, even feathers. Just be sure everything is caught into the scarf with a few stitches. ■ Ask your friends
10
Soak the scarf in water for about twenty minutes or until the stabilizer is completely dissolved. You may want to use a little dish soap to remove any residual traces of stabilizer. Gently remove the scarf from the water and rinse it in clear water. Lay the scarf flat to dry or toss it in your dryer on delicate for five to ten minutes.
11
8
Darlene’s Tips
who knit or crochet for some of their leftover yarns. ■ Your stitching
lines don’t have to be straight and even. In fact, wavy lines can add a little interest to your scarf.
9
11
Congratulations! Now you’re styling!
47
p47 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp28-51/M8
17/01/2006
5:50 PM
Page 48
p48 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp28-51/M8
17/01/2006
5:50 PM
Page 49
"
Swimsuit Wrap The easiest of all apparel projects is the swimsuit coverup. Perfect for poolside or cruise ship wear, it’s a versatile addition to anyone’s summer wardrobe. The fabric can be a novelty net fabric, a loosely woven knit, stretch Lycra, gauze, or chiffon. Your wrap can be tied around the waist, the bust, or the shoulder with a center or side slit. It adds a touch of modesty with an element of peek-a-boo. From diving board to dining room, or from beach to bistro, you can make a graceful transition in your swimsuit coverup.
YOU’LL NEED 12 ⁄ 3 yd. (1.58 m) fabric Scissors Rotary cutter, cutting mat, and straightedge, optional Thread Sewing machine
49
p49 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp28-51/M8
17/01/2006
5:50 PM
Page 50
LET’S GET SEWING
1
If your fabric has selvages, carefully trim them off.
1 2
With the wrong side of the fabric facing up, fold one long edge over 1 ⁄ 2" (1.3 cm) and crease the fold with your fingers. Then fold the edge over 1 ⁄ 2" (1.3 cm) again, and crease, forming a double-fold hem.
Sew along the inner fold of the hem all the way down the side, folding and fingerpressing as you go.
3
3
Repeat steps 2 and 3 on the opposite side and on the cut ends. That’s it!
4
Wrap and tie for instant sophistication!
50
p50 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp28-51/M8
18/01/2006
9:02 AM
Page 51
Darlene’s Tips ■ If you choose
stretchy fabric, stitch the hems with a twin needle, stretch stitch, or serger so the stitches won’t break when the fabric stretches. ■ If you choose
Lycra for your swimsuit wrap, keep a fabric softener sheet handy to wipe your work area. This eliminates static and picks up tiny lint fibers.
51
p51 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp52-75/M8
p52
17/01/2006
5:51 PM
Page 52
Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp52-75/M8
17/01/2006
5:51 PM
Page 53
"
Tough Tote Reusable, durable, fashionable, and customized, totes have as many uses as there are styles, colors, and sizes in which to make them. Choose a strong fabric like denim, duck cloth, canvas, or tapestry. Whether they’re for groceries, beach, baby gear, overnight, books, or laundry, you can never have too many totes. These versatile bags are always a welcomed gift. Better plan on making more than one.
YOU’LL NEED 2 ⁄ 3 yd. (0.63 m) fabric 44" (112 cm) strapping, 11⁄ 2" (3.8 cm) wide Tape measure or yardstick (meterstick) Pencil or other fabric marker Scissors Rotary cutter, cutting mat, and straightedge, optional Iron and ironing board Pins Thread Sewing machine
53
p53 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp52-75/M8
17/01/2006
5:51 PM
LET’S GET SEWING
Page 54
Cut two 24" (61 cm) squares of fabric. Cut the strapping into two 22" (56 cm) pieces.
1
Pin the fabric squares, right sides together, along the sides and bottom. Starting at an upper edge, sew a 1 ⁄ 2" (1.3 cm) seam down one side, across the bottom, and up the other side. Pivot at the corners with the needle down in the fabric.
2
directly over the bottom seam. Mark a line perpendicular to the seams 2" (5 cm) from the point. Stitch on the line. Repeat on the opposite corner. Cut off the triangular corners, leaving a 1 ⁄ 2" (1.3 cm) seam allowance.
5
Finish the seam allowances together by zigzagging over the raw edges. Or, serge the seam allowances together.
3
Fold a bottom corner into a triangle with the side seam
4
5
Zigzag or serge the seam allowances together.
6
4
54
p54
Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp52-75/M8
17/01/2006
5:51 PM
Page 55
Turn under the upper edge 1 ⁄ 4" (6 mm) and press. Then turn under again 1" (2.5 cm) and press, forming a self facing.
9
Pin the ends of one strap under the facing on one side of the tote, each 5 1 ⁄ 4" (13.2 cm) from the center. Repeat with the other strap on the other side of the tote. The straps will extend downward.
Turn the straps upward. Stitch back and forth over the straps near the top of the bag to reinforce them.
7 8
Stitch around the tote top along the inner fold of the facing, catching the straps in the stitching.
10
Darlene’s Tips ■ Before pre-
shrinking your fabric, snip a small triangle from each corner. This trick will minimize fraying in the wash. ■ Want your tote
wider at the bottom? In step 4, stitch the lines farther from the triangle points. Just remember this will also make the tote a little shorter.
10
Happy toting!
8
55
p55 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp52-75/M8
p56
18/01/2006
9:53 AM
Page 56
Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp52-75/M8
17/01/2006
5:51 PM
Page 57
"
Butterfly Blouse You’ll feel light and airy and feminine—as if you’re floating with the wind— in this butterfly blouse, which you can make in less than an hour. This blouse can be worn several different ways. Belted or free-flowing, the butterfly blouse is very comfortable and goes with practically everything. It’s light and nonrestrictive and can be casual or dressy.
YOU’LL NEED 2 yd. (1.85 m) fabric, 45" (115 cm) wide Scissors Rotary cutter, cutting mat, and straightedge, optional Iron and ironing board Pins Thread Sewing machine and rolled hem foot Bias tape maker
57
p57 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp52-75/M8
17/01/2006
5:51 PM
LET’S GET SEWING
Page 58
Fold the fabric right sides together, aligning the selvages. Press the fold. Cut the fabric 48" (122 cm) long for small or medium sizes; cut it 54" (137 cm) long for large or extra-large sizes. Set the extra fabric aside.
away from center on the upper cut edge. Connect the dots with a fabric marker, making a slight scoop. This is your neckline. Cut both layers on the marked line.
1
Pin the pieces, wrong sides together, 9" (23 cm) from the neck opening on each side. Stitch a 1 ⁄ 4" (6 mm) seam from the neck to the pin on each side, for the shoulders. Clip the seam allowances up to, but not through, the stitching at the marks. Press the seam allowances open.
4
Carefully cut along the pressed fold so you have two pieces, each about 22 1 ⁄ 2" (57.3 cm) wide. The lengthwise grain of the fabric will run horizontally in the blouse. The neck opening will be in the center of the edges you just cut. Also cut off the selvages. These edges will be the bottom of the blouse.
2
Mark the center of the neck edges with a small clip. Mark dots 1 1 ⁄ 2" (3.8 cm) down from the center and 7" (18 cm)
3
3
Turn the blouse right sides together. Press the shoulder seams. Stitch the seams again 1⁄4" (6 mm) from the edge, encasing the seam allowances. You have just finished French seams!
5
5
58
p58
Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp52-75/M8
17/01/2006
5:51 PM
Page 59
Darlene’s Tips
Cut a bias (diagonal) strip 1 1 ⁄ 2" (3.8 cm) wide from the remaining fabric piece. This will be used to bind the blouse neckline.
6
Run the bias strip through a bias tape maker and press the folds as you gently pull it through. Fold the binding strip in half and press again. Take care not to distort the width of the strip as you press.
■ Embellish to
your heart’s content with rhinestones, sequins, or decorative silk ribbon embroidery.
7
■ Save a small 9
Stitch a rolled hem on the bottom, sides, and shoulder vents of the blouse. Use either your conventional machine with a rolled hem foot, or the serger.
10
swatch of fabric to keep in your purse. You’ll be able to coordinate accessories without the guesswork.
7
Pin the binding strip around the neckline, encasing the raw edge and overlapping the ends in the back.
8
10
Place the neck edge onto the free arm of your sewing machine, and stitch the binding strip close to the lower fold.
9
You can belt it, knot the ends, or simply spread your wings and fly!
59
p59 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp52-75/M8
p60
18/01/2006
9:44 AM
Page 60
Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp52-75/M8
17/01/2006
5:51 PM
Page 61
"
Wine Gift Bags A fabric gift bag is a classy way to present a bottle of wine or sparkling beverage. These bags are lined, so choose two coordinating fabrics, one for the outer bag and one for the lining. You can make three bags with as little as 3 ⁄ 8 yd. (0.35 m) of each fabric. Have fun with your fabric choices. Pick a design that reflects a personal interest of the receiver or sew bags from shiny or metallic fabrics for special occasions and holidays.
YOU’LL NEED 3 ⁄ 8 yd. (0.35 m) outer fabric 3 ⁄ 8 yd. (0.35 m) lining fabric One corded tassel set or 1 yd. (0.92 m) decorative ribbon Tape measure or yardstick (meterstick) Pencil or other fabric marker Scissors Rotary cutter, cutting mat, and straightedge, optional Iron and ironing board Pins Thread Sewing machine
61
p61 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp52-75/M8
17/01/2006
5:51 PM
LET’S GET SEWING
Page 62
Cut a 14" × 18" (35.5 × 46 cm) rectangle of both the outer fabric and the lining fabric.
1
Fold the outer fabric in half, right sides together. Pin the cut edges together.
2
Starting at the folded bottom edge, sew a 1 ⁄ 2" (1.3 cm) seam along the bottom toward the side. Remove the pins as you come to them.
3
Starting 3" (7.5 cm) from the folded edge, sew a 1 ⁄ 2" (1.3 cm) seam along the bottom toward the side. Remove the pins as you come to them.
6
Stop stitching with the needle down in the fabric 1 ⁄ 2" (1.3 cm) from the side. Turn the fabric and sew up the side. Backstitch at the top. Trim the bottom corners to within 18⁄ " (3 mm) of the stitching.
7
Stop stitching with the needle down in the fabric 1 ⁄ 2" (1.3 cm) from the side. Turn the fabric and sew up the side. Backstitch at the top. Trim the bottom corners to within 1 ⁄ 8" (3 mm) of the stitching.
4
Fold the lining fabric in half, right sides together. Pin the cut edges together.
5
7
Press open the side seam allowances of the outer fabric and lining.
8
Turn the lining bag right side out.
9 62
p62
Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp52-75/M8
17/01/2006
5:51 PM
Page 63
Place the lining bag inside the outer bag, right sides together, matching the side seams and upper edges. Pin the upper edges together.
10
Slide the bag onto the free arm on your sewing machine. Sew the lining to the outer bag at the upper edge.
11
Turn the bags right side out through the opening in the bottom of the lining.
12
Press under the seam allowances of the opening. Machine stitch the opening closed.
13
Darlene’s Tips ■ Look in quilt
shops or the quilting fabrics section of your local fabric store for theme designs. You’ll find seasonal and holiday prints and themes like cooking, animals, sports, gambling, fishing, and music. ■ You probably
don’t have to pin the edges before sewing, but doing so can be helpful if you are using slippery or stretchy fabrics. 13
Turn the lining down inside the outer bag. Press the upper edge.
14
Tuck a bottle of wine into the bag. Tie the bag around the bottle neck with a corded tassel set or decorative ribbon.
15 11
■ Cord and tas-
sel sets intended for craft purposes are inexpensive. You can buy them at craft stores, in the craft section of the fabric store, or even at papercrafting stores. The ones sold in the home décor aisle, called chair ties, can be pretty pricey.
Cheers!
63
p63 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp52-75/M8
p64
17/01/2006
5:51 PM
Page 64
Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp52-75/M8
17/01/2006
5:51 PM
Page 65
"
Bouquet Sachet Potpourri bouquet sachets are easy, pretty, and sweet smelling, making them a triple winner every time. You can use any fabric you like, but I think they look most elegant made with two shades of satin. Fill this pretty sachet with potpourri and add flowers to match the fabric. The sewing is simple, just four straight lines!
YOU’LL NEED 1 ⁄ 2 yd. (0.5 m) each of two coordinating fabrics Tape measure or yardstick (meterstick) Pencil or other fabric marker Scissors Rotary cutter, cutting mat, and straightedge, optional Iron and ironing board Pins Thread Sewing machine Hand needle Potpourri Strong rubber band Assorted silk flowers in matching colors Wire cutters Hot glue gun and glue sticks
65
p65 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp52-75/M8
17/01/2006
5:51 PM
LET’S GET SEWING
Page 66
Cut an 18" (46 cm) square of each fabric.
1 2
Pin the fabrics, right sides together.
Trim the corners of the seam allowances to within 1 ⁄ 8" (3 mm) of the stitching. Turn the square right side out.
4
Press the square. Press the seam allowances under at the opening. Slipstitch the opening closed.
5
2
Stitch a 1 ⁄ 2" (1.3 cm) seam
3
around the square, pivoting with the needle down in the fabric at the corners. Leave a 3" (7.5 cm) opening along one edge for turning the square right side out.
5
66
p66
Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp52-75/M8
18/01/2006
9:03 AM
Page 67
Place the fabric square on a table with the side you want showing facedown. Mound potpourri in the center of the square.
6
Pull up all four corners tightly and twist a rubber band around all four “flower
7
petals” about 4" (10 cm) from the top. Pull the corners out evenly to look like flower petals. Cut silk flowers from their stems, using a wire cutter. Hot glue the flowers in place on the top of the sachet.
8
Darlene’s Tips ■ To make sharp,
square corners after you turn the sachet right side out, push a large knitting needle or a ballpoint pen (with the inkball retracted) through the opening to gently ease the stitches out to the corners.
8
What could be easier?
67
p67 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp52-75/M8
p68
17/01/2006
5:51 PM
Page 68
Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp52-75/M8
17/01/2006
5:51 PM
Page 69
"
Book Cover When you give a book, you can add a custom fabric cover for a personal touch. Covers protect your books, and you can be private about what you’re reading! Book covers can be made in almost any type of fabric. This cover even has a ribbon bookmark to hold the reader’s place. The hardest part about making them is deciding which book to begin with, so grab a book and let’s go.
YOU’LL NEED 1 ⁄ 2 yd. (0.5 m) outer fabric 1 ⁄ 2 yd. (0.5 m) lining fabric 12" (30.5 cm) decorative ribbon Tape measure or yardstick (meterstick) Pencil or other fabric marker Scissors Rotary cutter, cutting mat, and straightedge, optional Iron and ironing board Pins Thread Sewing machine Overcasting foot, optional Hand needle
69
p69 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp52-75/M8
17/01/2006
5:51 PM
LET’S GET SEWING
Page 70
Layer the fabric and lining right sides together. Place the closed book on the fabrics with the spine in the center and wrap the fabrics over the front cover. Adjust the placement of the book until the fabric selvages are even.
1
Carefully roll back the upper fabrics, keeping the book in place. Mark a line on the lower fabric 5 ⁄ 8" (1.5 cm) from the top and bottom of the book and 3 5 ⁄ 8" (9.3 cm) from
2
the front edges of the book. Also mark the location of the spine. Roll the top fabric back and carefully flip everything over to mark the other side of the book cover.
Remove the book. Cut through both layers along the marked lines. Pin the layers together around the outer edge.
3
Sandwich the piece of ribbon between the outer fabric and lining at the spine mark, matching raw edges. Pin the ribbon to the seam allowances.
4
Stitch a 1 ⁄ 2" (1.3 cm) seam around the book cover, pivoting with the needle down in the fabric at the corners. Backstitch at the beginning and end, leaving a 3" (7.5 cm) opening along one side for turning the cover right side out.
5
2
70
p70
Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp52-75/M8
17/01/2006
5:51 PM
Page 71
Trim the corners diagonally to within 1 ⁄ 8" (3 mm) of the stitching. Turn the book cover right side out.
6
Place the closed book inside the lined rectangle. Fold the extensions to the inside of the book’s front and back covers, and pin carefully close to the top and bottom edges. Open the book and slide it out of the cover.
8
Darlene’s Tips ■ You can
embroider a message, name, or sentiment on the ribbon before you sew it into the book cover. ■ Sandwich lace,
ruffles, or fringe between the layers around the outer edge for a book cover loaded with personality!
6 8
Press the outer seam flat and slipstitch the opening closed. You should have a large lined rectangle with a ribbon bookmark coming out of the center top.
7
If you have an overcasting foot, attach it to the machine. Using a mid-width zigzag (3 mm) and short length, zigzag each of the four doubled pinned edges together.
9
■ Add an appli-
qué, a pocket, or a monogram to the front of the cover before you line it. ■ If the cover is
for a child, let him or her have the fun of choosing the fabric.
Dress the book again and enjoy your new book cover!
7
71
p71 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp52-75/M8
p72
18/01/2006
10:52 AM
Page 72
Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp52-75/M8
17/01/2006
5:51 PM
Page 73
"
Warming Rice Bag When the weather outside is frightful, your rice bag will be so delightful! Just pop it in the microwave for two minutes and enjoy soothing warmth. Comfort aching muscles, a tired back, or cold feet. The removable cover has a drawstring closure and is washable. With fabrics to suit any occasion, holiday, or hobby, rice bags make a great anytime gift for yourself, your family, or friends. You’ll want to try yours out tonight.
YOU’LL NEED 1 ⁄ 2 yd. (0.5 m) cotton fabric 1 ⁄ 2 yd. (0.5 m) muslin 24" (61 cm) narrow cording or ribbon 11 ⁄ 2 lb. slow-cook raw rice Tape measure or yardstick (meterstick) Pencil or other fabric marker Scissors Rotary cutter, cutting mat, and straightedge, optional Iron and ironing board Pins Thread Sewing machine Seam ripper
73
p73 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp52-75/M8
17/01/2006
5:51 PM
LET’S GET SEWING
Page 74
Cut a 17" × 12" (43 × 30.5 cm) rectangle on the lengthwise grain of the cotton print fabric. Cut a 13" × 11" (33 × 28 cm) rectangle on the lengthwise grain of the muslin.
1
Fold the muslin in half lengthwise, right sides together, so you have a folded piece 13" (33 cm) long. Pin the long cut edges and one short edge.
2
Using a very short straight stitch, sew a 1 ⁄ 2" (1.3 cm) seam across the short end and up the side of the muslin to form a bag.
3
Turn the muslin bag right side out. Fill the bag with rice to within 2" (5 cm) of the top.
4
Close the top and fold the edges over 1 ⁄ 2" (1.3 cm)
5
three times. Pin. Stitch across the upper folds several times to lock the rice in. You just finished your rice bag.
5
Now let’s make the washable cover. Fold the cover fabric in half lengthwise, right sides together, so you have a folded piece 17" (43 cm) long. Pin the long cut edges and one short edge.
6
Sew a 1 ⁄ 2" (1.3 cm) seam
7
across the short end, pivot at the corner, and sew up the side of the cover. Trim the bottom corners diagonally to within 1 ⁄ 8" (3 mm) of the stitching. Finish the seam allowances with zigzag stitches. Turn under the upper edge 1 ⁄ 2" (1.3 cm) and press. Turn under the edge 1" (2.5 cm) again and press. This will become the casing.
8
74
p74
Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp52-75/M8
17/01/2006
5:51 PM
Page 75
Unfold the upper edge. On the right side of the bag, opposite the seam line, mark a vertical line, 3 ⁄ 4" (2 cm) long, just below the second fold line. Stitch a buttonhole on the line through the single layer of fabric, following the instructions in your sewing machine manual.
9
Slide the cover onto the free arm of the sewing machine. Stitch close to the lower fold of the casing, taking care not to catch the cording or ribbon in the stitches.
12
Darlene’s Tips ■ You can add
dried herbs, such as lavender or chamomile, to the rice for a little aromatherapy. Or add a few drops of scented oil. ■ Customize
your rice bags with monograms or purchased appliqués.
Insert a pin across one end of the buttonhole and carefully slit open the buttonhole, using a seam ripper. The pin will prevent you from cutting too far.
10
12
Turn the cover right side out. Slide the rice bag into the cover, pull the drawstring, and tie it closed.
13 10
Turn the cover inside out. Wrap the cording or ribbon around the upper edge and pull both ends through the buttonhole from the wrong side. Refold the casing over the cording or ribbon. Pin the casing in place, keeping the cording or ribbon between the pins and the upper fold.
11
13
Now zap it for two minutes and give it a try.
75
p75 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp76-96/M8
18/01/2006
10:52 AM
Page 76
p76 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp76-96/M8
17/01/2006
5:52 PM
Page 77
"
Hanger Pockets If you can sew a straight line, you can make hanger pockets. Easy, fast, and fun to make, hanger pockets can be used to hide money or documents, hold a sachet to freshen an outfit, or coordinate jewelry. I’ve included three styles: one with buttonholes for a tailored look; a romantic, Victorian version with hidden Velcro and tiny ribbon roses; and one with ribbon ties for a softer, feminine look. Hanger pockets make unique hostess, birthday, or bridal gifts because they are difficult to find in a store. Your friends will think you are so clever!
YOU’LL NEED For three hanger pockets
For button closure
3 hangers with bottom rungs
Four buttons
1 ⁄ 2 yd. (0.5 m) outer fabric 1 ⁄ 2 yd. (0.5 m) lining fabric
For Velcro closure
Tape measure or yardstick (meterstick)
Four Velcro dots Four satin ribbon roses
Pencil or other fabric marker
Hot glue gun and glue sticks
Scissors Rotary cutter, cutting mat, and straightedge, optional
For ribbon closure
Iron and ironing board
12 ⁄ 3 yd. (1.58 m) ribbon, 1 ⁄ 4" (6 mm) wide
Pins Thread Sewing machine
77
p77 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp76-96/M8
17/01/2006
5:52 PM
LET’S GET SEWING
Page 78
Button or Velcro Closure Measure the bottom hanger rung. Cut a rectangle of outer fabric and one of lining 1" (2.5 cm) wider than this measurement and 15" (38 cm) long.
1
Pin the outer fabric and lining, right sides together, matching the edges. Stitch a 1 ⁄ 2" (1.3 cm) seam around the hanger pocket, pivoting with the needle down in the fabric at the corners. Backstitch at the beginning and end, leaving a 3" (7.5 cm) opening along one side for turning the hanger pocket right side out.
2
Trim the corners diagonally to within 1 ⁄ 8" (3 mm) of the stitching. Turn the hanger pocket right side out, and press. Slipstitch the opening closed.
3
pocket. Pin the layers together along the sides. Lightly press the lower edge. On the right side of the top flap, mark the placement for four evenly spaced buttonholes or Velcro circles. Place the outer marks 1" (2.5 cm) from the sides.
5
Stitch buttonholes, following the instructions in your sewing machine manual. Or stitch Velcro circles in place on the underside, using an in-place zigzag stitch (bartack).
6
Place the hanger pocket over the bottom rung of the hanger, and fold down the upper flap. Mark the placement for the buttons or Velcro circles on the front of the pocket.
7
Turn up the bottom edge 5 1 ⁄ 2" (14 cm), forming the
4
4
7
78
p78 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp76-96/M8
17/01/2006
5:52 PM
Page 79
Unpin the pocket at the sides. Attach buttons by hand or by machine. Or stitch Velcro circles in place using an in-place zigzag stitch (bartack).
8
Repin the pocket, and stitch the sides together using a 2 mm wide zigzag, stitching as close to the edges as possible.
9
If you chose a Velcro closure, hot-glue small ribbon roses over the bartacks on the right side of the pocket flap.
10
Continue with steps 2 to 4, opposite. Place the hanger pocket over the bottom rung of the hanger, and fold down the upper flap. Mark the placement for ribbon ties on the front of the pocket, just below each loop.
3
Darlene’s Tips ■ To hold a but-
ton in place for sewing, dab the back of the button with a fabric glue stick. ■ Used fabric
Unpin the pocket. Fold the long ribbons in half to find the center. Stitch the ribbons to the pocket front at the marks, bartacking through the ribbon at the center.
4
softener sheets can serve double duty as lightweight interfacing to stabilize buttonholes, appliqués, or pocket edges.
Ribbon Closure Follow step 1, opposite. Also cut four 3" (7.5 cm) pieces and four 12" (30.5 cm) pieces of ribbon.
1
Mark the upper edge of the outer fabric for the placement for four evenly spaced ribbon loops. Place the outer marks 1" (2.5 cm) from the sides. Fold the short pieces of ribbon in half and pin the ends on the right side of the fabric at the marks. Baste the ribbons in place 1 ⁄ 4" (6 mm) from the edge.
2
4
Finish the hanger pocket as in step 9, left. Place the hanger pocket on the hanger. Thread one end of each ribbon tie through a ribbon loop and tie a bow.
5
You did it!
79
p79 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp76-96/M8
17/01/2006
5:52 PM
Page 80
p80 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp76-96/M8
17/01/2006
5:52 PM
Page 81
"
Napkin Tray These cute fabric trays, tied at the corners with ribbons, can hold the napkins at your next party. Make one for the beverage counter, one for the main buffet, and one for the dessert table. Your napkin holders will be such a hit, you’ll want to make a set for every season and celebration.
YOU’LL NEED 1 ⁄ 3 yd. (0.32 m) fabric to coordinate with napkins 1 ⁄ 3 yd. (0.32 m) fusible fleece 2 yd. (1.85 m) satin or grosgrain ribbon, 1 ⁄ 4" (6 mm) wide One package decorative luncheon, beverage, or dinner napkins Tape measure or yardstick (meterstick) Pencil or other fabric marker Scissors Rotary cutter, cutting mat, and straightedge, optional Iron and ironing board Pins Thread Sewing machine and zipper foot Square of lightweight cardboard, same size as napkins
81
p81 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp76-96/M8
17/01/2006
5:52 PM
LET’S GET SEWING
Page 82
Cut two squares of fabric and two squares of fusible fleece, each 4" (10 cm) larger than the size of the napkins. Cut eight pieces of the ribbon, each 9" (23 cm) long.
Place the other square, right side down, over the square with the pinned ribbons, matching the edges. Pin in place.
1
4
Place the adhesive side of a fusible fleece square against the wrong side of one square of fabric. Fuse them together, following the manufacturer’s directions. Repeat for the other fleece and fabric squares.
Starting just before a ribbon placement, stitch a 1 ⁄ 2" (1.3 cm) seam around all four sides. Backstitch at the beginning and end and over each ribbon. Stop with the needle down in the fabric 1 ⁄ 2" (1.3 cm) from the corners to pivot. Stop stitching just after the last ribbon, leaving a space for turning the napkin holder right side out.
2
Pin the ribbons to the right side of a square, each 2" (5 cm) from a corner, with the ends of the ribbons matching the fabric edge.
3
5
5
3
82
p82 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp76-96/M8
17/01/2006
5:52 PM
Page 83
Trim the seam allowances diagonally at the corners to within 1 ⁄ 8" (3 mm) of the stitching. Turn the napkin holder right side out. Press.
6
Attach a zipper foot to the machine. Stitch close to the edge of the cardboard.
9
Darlene’s Tips ■ For the light-
weight cardboard, use a pantyhose insert or the back of an old legal pad. If you steam the cardboard before putting it in, it will bend and flex, so you won’t end up with a crease.
Steam the cardboard square for a few seconds. Then carefully bend and insert cardboard through the opening. Slipstitch the opening closed.
7
■ Instead of slip-
stitching the opening closed, you can use a decorative stitch along the entire upper edge.
Center the cardboard inside the finished square. It should be 1" (2.5 cm) from all sides. Pin the layers together around the cardboard to hold it in place.
8
9
Tie the ribbons into tight bows at each corner, raising the sides of the holder.
10
■ For an elegant,
tailored look, use metallic brocade and miter the corners instead of tying them with ribbons.
Add the napkins and start the party!
83
p83 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp76-96/M8
17/01/2006
5:52 PM
Page 84
p84 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp76-96/M8
17/01/2006
5:52 PM
Page 85
"
Fringed Fleece Baby Blanket For this charming fleece baby blanket, you’ll be using not just one square, but sixty-three of them! Baby blankets are fun, fast, and very forgiving, especially when the seam allowances are fringed. The fuzzy edges get fluffier with every washing and help make this blanket a favorite cuddly comfort item. The finished blanket is 42" wide × 54" long (107 × 137 cm). Your baby blanket will surely bring smiles and be treasured for years to come.
YOU’LL NEED 1 ⁄ 2 yd. (0.5 m) fleece solid A 1 ⁄ 2 yd. (0.5 m) fleece solid B 1 ⁄ 2 yd. (0.5 m) fleece print C Paper and colored pencils Tape measure or yardstick (meterstick) Pencil or other fabric marker Scissors Rotary cutter, cutting mat, and straightedge, optional Pins Thread Sewing machine
85
p85 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp76-96/M8
17/01/2006
5:52 PM
LET’S GET SEWING
Page 86
Draw a grid on a piece of paper with seven blocks across and nine blocks down.
1
Set your machine to sew a short, narrow zigzag. This will allow the seams to give a little without breaking threads when the fleece stretches.
4
Color in the grid to represent the three different colors of your fabrics. You are designing your own quilt!
2
Referring to your grid, place the first two squares in the top row wrong sides together. Stitch a 1" (2.5 cm) seam. Continue to add squares to complete the top row. The seam allowances will be on the right side of the blanket. Don’t panic! This will become your fringe.
5
2
Place the fabric in a single layer on your cutting table. Cut twenty-one 8" (20.5 cm) squares of each fabric. Keep the squares in separate stacks.
3
5
86
p86 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp76-96/M8
17/01/2006
5:52 PM
Page 87
Stitch each row together, as in step 5, using your graph as a guide. Place the strips on a large table or counter in the order they will appear in the blanket.
6
Now it’s time to sew all the completed strips together. Start by pinning the first two rows, wrong sides together, being careful to match the seam lines as they intersect. As you approach each intersection, stop with the needle down in the fabric to make sure the seam allowances on the top and underside are spread apart.
7
Keep adding one row at a time until the blanket is complete.
8
Go find a comfy chair. With the sharp tips of your scissors, clip into all the seam allowances up to, but not through, the stitching. Make the cuts 1 ⁄ 4" (6 mm) apart all over the quilt creating the fringe. Also cut fringe around the outer edge.
9
Darlene’s Tips ■ As you cut the
fringe, triplecheck the blanket for stray pins. ■ Don’t clip into
the seam intersections, as this may cause your seams to open up!
9
7
Wash and dry the blanket to fluff up the fringe.
10
Wrap it up and enjoy the smiles!
87
p87 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp76-96/M8
17/01/2006
5:52 PM
Page 88
"
SOME BASICS Selecting Tools and Supplies These tools make sewing easier and more successful. Tape measure (3) has the flexibility to measure items with shape and dimension. Select one made of a material that will not stretch.
MEASURING AND MARKING TOOLS Transparent ruler (1) lets you see what you are measuring and marking. It also is used to check fabric grain lines.
Seam gauge (4) is a 6" (15 cm) metal or plastic ruler with a sliding marker. It helps make quick, accurate measurements, particularly the width of seams.
Yardstick or meterstick (2) should be made of smooth hardwood or metal.
1
5
2 4
6
3
7
8
Transparent T-square (5) is used to locate grain lines and to mark square corners. Marking chalk (6) is available as powder in a rolling wheel dispenser, as a pencil, or as a flat slice. Chalk lines are easily removable from most fabrics. Fabric marking pens (7) are either air-erasable or water-erasable. Air-erasable marks disappear in forty-eight hours; watererasable marks wash off with a sprinkle of water. Narrow masking tape (8) is an alternative way to mark textured fabrics like fleece.
88
p88 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp76-96/M8
17/01/2006
5:52 PM
Page 89
CUTTING TOOLS It’s worth it to buy good cutting tools. Use them only for your sewing, because cutting paper or other household materials will dull them quickly. Dull tools are not only a pain to work with, but can also damage fabric. Scissors have both handles the same size; shears have one handle larger than the other. Have your cutting tools sharpened by a qualified professional from time to time. Bent-handled dressmaker’s shears (1) are best for cutting fabric shapes because the angle of the
lower blade lets fabric lie flat on the cutting surface. Select a blade length appropriate for the size of your hand; shorter lengths for smaller hands. Lefthanded shears are also available. Sewing scissors (2) have one pointed and one rounded tip for clipping threads and trimming and clipping seam allowances. A 6" (15 cm) blade is good for most tasks. Seam ripper (3) quickly removes stitches and opens buttonholes. Use it carefully so you don’t cut the fabric.
Rotary cutter (4) works like a pizza cutter. A locking mechanism retracts the blade for safety. Use the rotary cutter with a self-healing mat, which protects the work surface and the blade. To cut the straight lines of squares and rectangles, guide the blade along the edge of a hard, plastic ruler. Pinking shears and pinking rotary cutters (5) are used to finish seams. They cut fabric in a zigzag or scalloped pattern instead of a straight line.
2 3
4
1
5
89
p89 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp76-96/M8
18/01/2006
9:04 AM
Page 90
"
Fabrics There are so many wonderful fabrics in the stores—which ones are right for your projects? Here are some tips to help you choose.
WOVEN FABRICS Woven fabrics have straight lengthwise and crosswise yarns. The pattern in which the yarns are woven gives the fabric its texture and look. The outer edges of woven fabrics are called selvages. Usually they should be trimmed away; because they are woven tighter than the rest of the fabric, they may shrink
when laundered or pressed. Grain lines are the directions in which the fabric yarns run. Strong, stable lengthwise yarns, running parallel to the selvages, form the lengthwise grain. The crosswise grain is perpendicular to the lengthwise grain and has a small amount of give. Any diagonal direction, called the bias, has a fair amount of stretch.
KNIT FABRICS Knit fabrics consist of rows of interlocking loops of yarn, as in a hand-knit sweater, but usually on a finer scale. Knit fabrics are more flexible than other fabrics, and they all stretch. CUTTING FABRICS
Twill Weave
Bias
Lengthwise Grain
Even Weave
Selvage
Crosswise Grain
Satin Weave
Cutting into a new piece of fabric may seem a little scary, considering the investment you have just made. Here are a few
90
p90 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp76-96/M8
17/01/2006
5:52 PM
Page 91
guidelines for accurate cutting that should boost your confidence. Straighten the cut ends of the fabric, using one of the three methods to follow. Then mark the other cutting lines, using the straightened edge as a guide. Before cutting fullwidth pieces of fabric, as for the duvet cover on page 17, pin-mark the placement of each cut along the selvage. Mark out pieces for smaller projects, like decorator pillows or napkins, with chalk. Double-check your measurements and inspect the fabric for flaws. Once you have cut into the fabric, you cannot return it. To be sure your projects will hang or lie straight, the squares and rectangles should be cut on-grain. This means that the cuts are made along the exact crosswise and lengthwise grains of the fabric. For large items, patterned
decorator fabrics are cut following the pattern repeat rather than the grainline, so the pattern can be matched at the seams. For tightly woven fabrics without a pattern that has to be matched, mark straight cuts on the crosswise grain, using a carpenter’s square. Align one edge to a selvage and mark along the perpendicular side.
For loosely woven fabrics, such as linen tablecloth fabric, pull out a yarn along the crosswise grain, from selvage to selvage. Cut along the line left by the missing yarn.
For tightly woven, patterned decorator fabric, mark both selvages at the exact same point in the pattern repeat. Using a long straightedge, draw a line connecting the two points. If you will be stitching two or more full widths of fabric together, make all the cuts at the same location in the repeat. This usually means that you cut the pieces longer than necessary, stitch them together, and then trim them to the necessary length.
91
p91 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp76-96/M8
18/01/2006
10:17 AM
Page 92
"
Sewing Skills Here are some sewing skills you will use over and over in the projects.
SEWING A SEAM Thread your machine and insert the bobbin. Holding the needle thread with your left hand, turn the handwheel toward you until the needle has gone down and come back up to its highest point. A stitch will form, and you will feel a tug on the needle thread. Pull on the needle thread to bring the bobbin thread up through the hole in the throat plate. Pull both threads together under
1
Begin by backstitching several stitches to the upper edge of the fabric. Hold the thread tails under a finger for the first few stitches. This prevents the needle thread from being pulled out of the
3
the presser foot and off to one side. Cut two pieces of fabric and pin them right sides together, lining up the edges. Place the fabric under the presser foot so the pinned edges align to the 1 ⁄ 2" (1.3 cm) seam allowance guide on the throat plate and the upper edges are just behind the opening of the presser foot. Lower the presser foot, and set your
2
3
2
1
needle and also prevents a thread jam (a ball of tangled-up mess).
stitch length at 2.5 mm, which equals ten stitches per inch.
92
p92 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp76-96/M8
18/01/2006
10:17 AM
Page 93
Stitch forward over the backstitched line, and continue sewing the 1 ⁄ 2" (1.3 cm) seam. Gently
MORE TIPS FOR SMOOTH SEWING
4
■
5
When you insert pins perpendicular to the edge you can easily grab them with your right hand as you come to them. You are also much less likely to stick yourself with a pin as you sew.
■
4
guide the fabric while you sew by walking your fingers ahead of and slightly to the sides of the presser foot. You are only guiding; let the machine pull the fabric. Stop stitching and remove pins as you come to them. When you reach the end of the fabric, stop stitching; backstitch several stitches, and stop again. Turn the handwheel toward you until the needle is in its highest position.
Raise the presser foot. Remove the fabric from the machine, pulling it either to the left or straight back. Cut the threads.
6
Backstitching keeps the beginning and end of your stitching line from pulling out. Check your owner’s manual to see how to backstitch with your machine.
■
It’s easier to stitch in a straight line if you watch the edge of the fabric along the seam guide and ignore the needle.
■
5
6
You have better control of your sewing speed if you operate your foot control with your heel resting on the floor.
■
You have just sewn a perfect seam!
Don’t ever sew over pins. You may be lucky and save a few seconds, or you could hit a pin and break the needle.
93
p93 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp76-96/M8
18/01/2006
4:35 PM
Page 94
SEAM FINISHES
the fabric puckers, try a narrower zigzag width.
Insert the needle into the fold just behind where the thread came up, and run it inside the fold for about 1⁄ 4" (6 mm). Bring the needle out, and draw the thread snug. Take your next stitch in the opposite fold, inserting the needle directly across from the previous stitch.
2
Everyday wear and tear on seam allowance edges will cause them to fray. To prevent this, you can finish the raw edges in one of these ways: Stitched and pinked finish Stitch 1⁄ 4" (6 mm) from each seam allowance edge, using a straight stitch. Trim close to the stitching, using pinking shears (page 89). This finish is suitable for finely woven fabrics that do not ravel easily.
SLIPSTITCHING One hand-sewing step you will use in many of the projects in this book is slipstitching an opening closed. Here are the steps for finishing that task:
Continue, crossing from one fold to the other, until you have sewn past the opening. Secure the thread with several tiny stitches in the seam line. Then take a long stitch, and pull it tight. Clip the thread at the surface, and let the tail disappear inside.
3
Insert the threaded needle between the seam allowance and the outer fabric, just behind the opening. Bring it to the outside in the seam line. If you are righthanded, work from right to left; lefties work from left to right.
1 Zigzag finish Set the zigzag stitch on or near maximum width and a length of ten stitches per inch, which equals 2.5 mm. Stitch close to the edge of each seam allowance so that the right-hand stitches go just over the edge. If
2
3 1
94
p94 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
Job no Scn : # Dept :
SFS1.pp76-96/M8
17/01/2006
5:52 PM
Page 95
"
Sewing Terms BASTE. Long, easy-to-remove stitches that are sewn into the fabric temporarily, either by hand or by machine. BIAS. Any diagonal line intersecting the lengthwise and crosswise grains of fabric. While woven fabric does not stretch on the lengthwise and crosswise grains, it has considerable stretch on the bias. BORDER PRINT. Fabric that is printed with a bold pattern, usually larger in scale than the rest of the design, running along one selvage. The border pattern is often used along the hemline in a garment, which means the lengthwise grain of the fabric runs horizontally on the garment. CASING. A fabric tunnel that is sewn into an item to carry elastic, ribbon, or cording. CLIP. Small, closely spaced cuts that are made into the seam allowances of a garment or other project, usually along a curve or into a corner. When the item is turned right side out, the seam allowances can spread apart and lie flat where they have been clipped. CROSSWISE GRAIN. On woven fabric, the crosswise grain runs perpendicular to the selvages. Fabric has slight “give” in the crosswise grain.
CUT LENGTH. The total length at which fabric should be cut for a project. It includes allowances for hems, seams, and matching any prints. CUT WIDTH. The total width at which fabric should be cut for a project. If more than one width of fabric (selvage to selvage) is needed, the cut width refers to the entire panel after seams are sewn, including allowances for any side hems or seams. DROP LENGTH. The length of a tablecloth from the edge of the table to the edge of the cloth. It can be anywhere from 6" (15 cm) to floor-length. FACING. A fabric extension or addition that is sewn as a backing to another piece; it protects raw edges or seam allowances from fraying and gives the item a neat, finished appearance. For instance, a jacket front and neckline have an outer layer and an underlayer, or facing. FINISHED LENGTH. The total length of a project after it is sewn. For a tablecloth, for instance, this includes the table length and twice the drop length. FINISHED WIDTH. The total width of a project after it is sewn. For a tablecloth, for instance, this includes the table width plus twice the drop length.
GATHER. Two rows of long machine stitches are sewn along a seam line. When the bobbin threads are pulled, the fabric slides along the stitches into tiny tucks. Gathers are used to fit a wide garment section to a narrower section while at the same time adding shaping. HEMMING. The outer edge of a project is given a neat finished appearance by turning under and securing the raw edge in one of several methods. It may be turned under twice and stitched, encasing the raw edge, as for the edges of a napkin. LENGTHWISE GRAIN. On woven fabric, the lengthwise grain runs parallel to the selvages. Fabrics are generally stronger and more stable along the lengthwise grain. LINED TO THE EDGE. Backing a fabric panel with lining that is cut to the exact same size. The two pieces are joined together by a seam around the edge; the seam allowances are encased between the layers. LINING. A fabric backing sewn to the top fabric to provide extra body and support for outer hems or seams. MARK. Temporary guidelines or guide points that are made on the fabric for cutting, stitching, or matching seams. There are many tools and methods for doing this, such as marking pencils and pens, chalk dispensers, tape, or pins.
95
p95 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SFS1.pp76-96/M8
17/01/2006
5:52 PM
Page 96
MITER. Folding out excess fabric at an angle to eliminate bulk. You probably miter the corners when you wrap gifts. NAP. Some fabrics have definite “up” and “down” directions, either because of a surface pile, like corduroy or velveteen, or because of a one-way print. When laying out a pattern on napped fabric, cut all the pieces with the top edges facing the same direction. PATTERN REPEAT. Characteristic of decorator fabrics, this is the lengthwise distance from one distinctive point in the pattern, such as the tip of a petal in a floral design, to the exact same point in the next pattern design. PIVOT. Perfect corners are stitched by stopping with the needle down in the fabric at the exact corner before turning. To be sure the corner stitch locks, turn the handwheel until the needle goes all the way down and just begins to rise. Then raise the presser foot, turn the fabric, lower the presser foot, and continue stitching. PRESHRINK. Fabric that shrinks, especially natural fibers, shrinks most in the first laundering. If you intend to launder your finished item occasionally, you should wash the fabric before cutting out the pieces, so the item will not shrink after you make it. “Dry clean only” fabrics can be preshrunk by steaming them with your iron.
PRESS. This step is extremely important to the success of your sewing projects. To press, select the heat setting appropriate for your fabric, and use steam. Lift and lower the iron in an overlapping pattern. Do not slide the iron down the seam, as this can cause the fabric to stretch out of shape, especially on the crosswise grain or bias. ROTARY CUTTER AND MAT. Time-saving tools for cutting fabric; they may take a little practice and serious precautions. The blade on a rotary cutter is extremely sharp. Cut slowly, watch your fingers, and always retract or cover the blade between cuts. The rotary cutter cannot be used without the special protective mat. SEAM. Placing two pieces of fabric right sides together and joining them along the edge with stitches. After stitching, the raw edges are hidden on the wrong side, leaving a clean, smooth line on the right side. SEAM ALLOWANCE. Narrow excess fabric that lies between the stitching line and the raw edges. The standard seam allowance width for apparel sewing is 58⁄ " (1.5 cm); the standard width for home décor sewing is 12⁄ " (1.3 cm). The seam allowance gives the seam strength and ensures that the stitches cannot be pulled off the raw edges. SEAM RIPPER. The tool doesn’t really rip. Use the sharp point to slide under and cut stitches one at a time. Avoid the temptation to simply slide the cutting hook down the seam. You will inevitably cut into your fabric. Even the most experienced sewers rely on their seam rippers, because we all make mistakes sometimes.
96
p96 Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 209.55(w)274.637(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:000000 D/O : 00.00.01 Co: CM0)
black text
SELVAGES. Characteristic of woven fabrics, this narrow, tightly woven outer edge should be cut away. Avoid the temptation to use it as one side of a cut piece, as it may cause the seam to pucker and may shrink excessively when laundered. TACKING. Short stationary stitches, sewn by hand or by machine, that hold two or more pieces of fabric together and are hardly noticeable. THREAD JAM. No matter how conscientious you are at trying to prevent them, thread jams just seem to be lurking out there waiting to mess up your day. The threads become tangled up in a wad on the underside of the fabric and the machine gets “stuck.” DON’T USE FORCE! Remove the presser foot, if you can. Snip all the threads you can get at from the top of the throat plate. Open the bobbin case door or throat plate, and snip any threads you can get at. Remove the bobbin, if you can. Gently remove the fabric. Thoroughly clean out the feed dog and bobbin area before reinserting the bobbin and starting over. Then forget it and move on! TOPSTITCHING. A decorative and functional stitching line placed 14⁄ " to 1" (6 mm to 2.5 cm) from the finished edge of an item. The stitching is done with the right side of the item facing up. Sometimes topstitching is done with a heavier thread or two threads through the machine needle, to make it more visible; sometimes it is done with decorative machine stitches.
SF Square One cover/M8
26/01/2006
3:12 PM
Page 1
AS SEEN ON THE HOME SHOPPING NETWORK DARLENE
Sewing from
CAHILL
Square One TURN SIMPLE FABRIC SQUARES INTO 20 PROJECTS
■ Fashions and accessories like a poncho, scarf, and blouse ■ Home decorating like placemats, decorator pillow, and duvet cover ■ Crafts like book covers, warming rice bag, and baby blanket
Sewing is fun, even if you’re starting from square one! ■ ■ ■ ■
Simple instructions with how-to photos Pick up skills and tips as you sew No patterns needed Personalize your projects with your favorite fabrics and finishing touches
Sewing from Square One
Sewing is magical – you can turn fabric squares into real projects to wear, give, or decorate your home!
DARLENE CAHILL loves sharing her sewing projects and tips as a host for the Home Shopping Network.
ISBN – 13: 978-1-58923-275-4 ISBN – 10: 1-58923-275-5 $18.95 US £9.99 UK $25.95 CAN
EAN
UPC
CATEGORY: Crafts
www.creativepub.com
DARLENE CAHILL
Job no:93985 Title : CPI-Ls0514_Sewing From Square one Client : PRO-VISION Scn : #175 Size : 425.5(w)274.5(h)mm Co : M8 Mac C Dept : DTP D/O : 19.01.06 (Job no:93985.C1 D/O : 26.01.06 Co: CM8)