Paper craft [3]

Citation preview

http://only-paper.ucoz.ru

Page

A

Assemble the head Use pattern: Page2/Page3.

Cut out A1 by cutting along the lines. Cut along the line marked . Cut a slot right in to the apex of the triangular glue tab.

Parts No.

Glue spot

A1 Head

Glue down the glue tabs one at a time in turn.

Scissors line

Parts name

Triangular glue tab

Make a mountain fold on A1. Trace along the mountain fold line with a pencil, scoring it to make it easier to fold.

A1

Tools

Notation Key Scissors line

Scissors

Mountain fold

Paste, or woodwork glue

Valley fold

A1

Glue spot

Stencil pen, or bodkin Ruler

The parts will be easier to assemble if curled. Using the photo as a guide, apply pressure with the palm of your hand, gradually curling the paper in the direction of the arrow.

A1

Glue reverse side

A1, B1

Parts No.

The Assembly instructions are divided into seven blocks: A (head), B (body), C (legs), D (dress), E (ribbon), F (arm), and G (veil and bouquet). Follow the instructions for each block to assemble your teddy bear. marks a basic assembly technique that remains the same regardless of the part. Instructions are printed only for the first instance.

Keep scissors and glue away from small children. Be careful not to cut your fingers when using scissors.

Add a slight curl to A1 when attaching it. Attach the triangular glue tabs so that the front side becomes convex. Using the photo as a guide, attach in the direction of the arrow.

A1

A1

http://only-paper.ucoz.ru

Page

Cut out A2 and A3, curl them and glue the triangular glue tabs, attaching each to A1.

Assemble A8 and attach to the head.Assemble A9.

A1

A8

A2 Head

A8

A2

A2

A9

A9

A9

A2 A1

A1 A3

A3

A2

Glue together the remaining glue spots.

Assemble A4 and attach it to A5.

A9

*Note: The completed A9 will be attached in the last step. A4

B

A4

Assemble the body Use pattern: Page4/Page5.

Assemble B1.

A5

B1

Assemble A6 and A7 in the same way and attach the ears to the head. A6

B1

A4

A7

A5

Assemble B2. A1

A4 A5

A6 A7

B2

A2 B2 A3

http://only-paper.ucoz.ru

Page

Attach C1 through C7 together.

Attach B1 and B2 together.

C1 B1 C2 B1

C2

C3 C4

C4

B2

B2

C3

C5

Assemble B3 and attach it to B1 to complete the body.

Do not put glue on the protruding parts.

C6

C5 B3

B3

B1 C6

C7

*Note: The completed head will be fitted in a later step.

C

Assemble parts C8 through C14 in the same way.

Assemble the legs

C13

Use pattern: Page6/Page7.

C14

C12

Assemble parts C2 through C7.

C8 C2

C11 C9

C3

C10

Fit both legs to the completed body. Leave the protruding part out.

C7 B1

C4 B2

C7

C6

C6 C5 B1

C13

B2

C6

C6 C7 C7

Return C7 to its original position.

http://only-paper.ucoz.ru

Page

D

Assemble D8 and attach it to D7.

Assemble the dress Use pattern: Page8/Page9/Page10/Page11.

D7

Attach D1 and D2.Assemble D3 and D4 in the same way, then attach D1 and D3.

D8

D2 D1

D1

D8

Attach D7 and D8 to the skirt.

D7 D8

D7

D8 D1

D3 D3 D3 D1

D1

D2

D1

Attach D5 and D6 to the skirt.

Assemble D9 and D10 and stick them together.

Match up the shapes of the glue spots and then stick them together.

Check front and back, then stick together.

D3

D9

D5

D10

D4

D3 D1

D5 D10 D9

D5 D1

Attach D9,D10 to the skirt,to complete the dress. D1

Check front and back, then stick together.

D6

D10 D6

D3

D10

D9

D6

D9

D3 D1

D4 D1

D3 D5

D5

D1 D2

D6

D3

http://only-paper.ucoz.ru

Page

E

Attach E2, E3, E4, E5 to E1.

Assemble the ribbon Use pattern: Page12.

E1

E1

Assemble E1.

E5 E2 E3

E1

E4

E3

E1 E5

Attach the ribbon to the dress. D10

E1

E1

E1

Assemble E2 and attach it to E3. Attach E4 and E5 in the same way.

Fit the dress over the body, to complete the ribbon. E2

E2

E2 E2 E4 E3

E3

E5

http://only-paper.ucoz.ru

Page

F

Assemble parts F7 through F12 in the same way.

Assemble the arm

F11

Use pattern: Page13.

F12

F10

Assemble parts F1 through F6. F1

F9

F2

F7 F8

Fit both arms to the completed body. F6

F6

Leave the protruding part out.

F4 F3 F5 B1

F5 F5 Return F6 to its original position.

F5

F11

F6 F6

Attach F1 through F6 together. Fit the head to the body and attach A9.

F2

B3

F1 F4

F3

F2

Do not put glue on the protruding parts.

F6 F5 F3

F4 B3

A9 F5

Return B3 to its original position.

F5

http://only-paper.ucoz.ru

Page

G

Attach G11,G12,G13 and G14.

Assemble the veil and bouquet

G11

G11

Use pattern: Page14/Page15.

Assemble G1, G2 and G3, G4 and attach G5. G13

G2 G1

G12 G14

G2

G13 G14 G12

Assemble G15 and attach it to G11.

G1

Assemble G3 and G4 in the same way.

Match up the shapes of the glue spots and then stick them together.

G3

Match up the lines.

G1

G15

G15

G1 G5

G4

G2

G2

G5

G11

Assemble G6 and attach to the ribbon. G6

Assemble parts G16 to G27 in the same way as the flowers for the veil, then stick them onto G15. G16 G17 G18 G19

G6 G24 G25 G26 G27

G5

G20 G21 G22 G23

G15

Attach G7,G8,G9 and G10 and attach it to the ribbon. G8

G7

Assemble G28 and stick it on behind the leaf of the bouquet. Attach the bouquet to the veil and you’re finished!

G8

G7 G8

G9

G9 G28 Glue here.

Open out the petals and then stick them together.

G10

G9

G10 G10

G11