Lockwood Locks and Builders Hardware Catalogue No. 12B [12B]

Citation preview

CATALOGUE No.

12B 1965

OCKWIDD LOCKS AND

BUILDERS HARDWNARE ECHATMA)

CERTIZĪNC AUSTRALIAN MADE

NIGHT LATCHES, DEADLOCKS, PADLOCKS, MORTICE LOCKS, DOOR CLOSERS, FURNITURE, etc. OGDEN INDUSTRIES PTY. LTD., HUNTINGDALE, VICTORIA TELEPHONE 569-0611

oCKWoOD

Lock manufacture is an extremely precise Engineering procedure, based firstly upon the production of a key, accurate to within close tolerances, and, secondly, the construction of the lock around, or to, that key.

Hand assembly of precision parts, and double-check testing and inspection from first to last operation, by experts with a background of years of specialist experience ensures smooth, eficient operation, maximum security and a lifetime of dependable service from every

LOCKWOOD LOCK.

All Lockwood

trade mark of

Bruno

Satin Brass

products illustrated in this catalogue carry the same

QUALITY- EFFICIENCY- DEPENDABILITY. STANDARD LOCKwooD FINISHES Florentine Bronze

Satin Nickel

Bright Chrome

Satin Chrome

627-3

Jockutoa

614-2

604-1

coNDITIONALLY GUARANTEE 634-1

4

?

A Complete range the cost of locks

display

ot

632-1

632-2

611-5

635-1

modern Sample Demonstrators is available for use in architects Display Mount is absolutely FREE:

only- the

"LOCK UP WITH

6114 x 211

showrooms, retail display areas, etc., at

LOCKWOOD''

ALL LOCKWOOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

OCKWO0QUALITY PRODUCTS

OCKNOON

No. 203

MAXIMUM SECURITY WITH

Lockwood

CYLINDER RIM DEADLOCKS Even a fleeting glance at Lock-

Cylinder Rim Deadlock gives an immediate sense of Confidence and Security! Closer inspection will reveal sturdy, foolproof construction and a bolt with an insert of case hardened steel Lockwood Cylinder Rim Deadlocks are ideal for shops, offices and factories. They can be operated by only 1 key in 80,000! wood's

No. 204

ldenticol with No. 203, except that an internal knob is not incorporated in No.204, theretore this lock can Particularly ony be 9pened by key from the outside. Suitoble tor use on gloss-panel doors, on lock-up shops, offices and foctories.

Lockwood quelity products are evaileble from Hardware Merchants and Stores.

ll

No. 205 Some os

teature

DEN PRDUUC

o

No

No.

except double-sided cylinder is a 205. This lock con only be operated, both inside and outside, by key. Porticulariy suitoble for use on gloss panel doors.

203

OCDEN INDUSTRIES PTY. LIMITED

EDWARD STREET. EAST OAKLEIGH, YIC

Phons

UM 1091 5 lines

OCKWOOD

OCKWOO QUALITY PRODUCTS Lockwood LATCH

Lockwood Latch Handles are the last wOrd 'n modern door fitments. They are designed for fitting without wood screws. They can be used in combination with Lock-

wood

HANDLES

Night

Lafches, Tubular Latches and Deadlocks. Nos. 303 and 304 are com-

bination latch handle and door knocker.

No. 301

"OAKLEIGH DESIGN

No. 302 "CLAYTON"

No. 303 "CARNEGIE

DESIGN

DESIGN

No. 304 WAVERLEY DESIGN

ENTRANCE DOOR SETS (complete) Lockwood Entrance Door Sets provide maximum security for every type

of building. As illustrated below, sets can comprise Night Lotches, Tubular Lotches and Deadlocks with varied specifications. Set 314, for instance, consists of the No. 205 Deadlock with double-sided cylinder and No. 5508 Tubular Lotch. This combination is ideal for shops with residential premises with similar doors, besides being suitable for doors of offices, factories, etc. Complete details are available from your Hardware Merchant or Store.

O SET

10

SET 312

SET 311

LOCKwooD QUALITY PRODUCTS ARE AVAILABLE FROM ALL HARDWARE MERCHANTS AND STORES.

OUSTRIES PRODUCT

oCDEN INDUSTRIES PTY. LIMITED 1091

EDWÄRD STREET, EAST OAKLEIGH, YIc

Phose UM

(5 lines)

SET 313

SET 314

OCKWOOD

3

PRINCIPLE OF THE PIN TUMBLER MECHANISM iiiinive

,

The same cylinder is shown above with the cor rect key inserted, ahowing how the pin-breaks are level at the surface of the barrel. Locks are built to a key, or around the key. in the sense that construction of a Pin Tumbler lock in thefirst the key cut code, then inserted the a The cylinder above is stanbarrel, and then bottom pinsPnumblers) of nscorrespondin8,to the depth of each indard production cylinder with dividual key cut htted. he top pins. as distinct the key removed, showing the from bottom pins, are al otastandar engn top pins held in their locking ression nrins are then placed in position, and

In these cut-away illustrations construction or the Tumbler Locking Mechanism 1s clearly shown.

shows the key

stration which self. by means of connection bars

the

position across the diviaing iine of the barrel and cylinder.

is

the rest finalised.

of the

in

to

lock

and

locking

i

or bolt cams in the case of padlocks, operates the rest the mechanism.

NOTE,-Lockwood Cylinder Locks are normally supplied with 5-pin cylinders but at Ogdenndustries discretion 6-pin cylinders may be used in

mechanism

pecial keying systems.

KEYED ALIKE PIN TUMBLER CYLINDERS: Keyed Alike, or identically-keyed locks are all built to the one key, any number of duplicates of which will operate all locka in the system, but not other locks. There is no limit to the quantity of locks which may be Keyed Alike.

KEYED TO DIFFER PIN TUMBLER CYLINDERS:

Keyed to Differ cylinders, as the name implies, are built to selected differing key codes so that the keys to any individual lock will operate that lock only and no other lock in the group.

6

MASTER-KEYED PIN TUMBLER CYLINDERS

MASTER KEYED PIN TUMBLER CYLINDERS (Refer Ilustrations 4 and 5): In Master Keyed Pin Tumbler Locks an extra set of pins is used so that two diferent divisions or

sets of pin-breaks are produced. In simple Master Keyed Systems, each lock is built to difer so that its own service key or change key operate that lock and that lock oly, but a second key or Master Key operating on the second system of pin-breaks is used to open all locks in the System.

GRAND MASTER KEYED PIN TUMBLER CYLINDERS (Refer lustration As this illustration shows, an extra set of Pin Tumblers again is pin holes we have three individual sets of pin tumblers producing each lock is built Keyed to Differ in groups, each group covered no other group; and a Grand Master Key covering all locks in all

"LOC K

UP

WITH

6):

used in Grand Master Keyed Locks, so that in at least three a third set of pin-breaks. In a Grand Master Keyed System by its own Master Key opening all locks in that group, but groups by operating on the third system of pin-breaks.

LOCKwoOD''

ALL LOCKwoOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

OCKUODD

LATCHES AND DEADLOCKS Nos.210&211

STREAM

LATCHES

OCKWNDOD

K

OPERATI1ON: From outside by key. From tctedso deadlocked from inside by snib that the key will not operate Reversible

Bolt with 9/16" throw.

MATERIAL: Case and StrikePressure Cast rity CERTIZINC Alloy. Bolt

olid ra

SIZE: Case 3-11/16" Backset. Z*8. DOOR

THICKNES:

14

24"

1-1/16

Minimum.

CYLINDER AND KEYS: 5-Pin Tumbler Solid Brass

2

keys. Key Blank Number K1054S. Cylinder with Key Changes 78,00. SPECIAL KEYING: Can be Master-keyed, Grand Master-keyed or Keyed Alike to any other Lockwood Lock having the same Key Blank Number. FINISH: 210-Case and Strike, Standard Brown Enamel including Knob, Snib and Screws.. Satin Chrome or Brown 211-Case and Strike, Satin Nickel, Chrome, Enamel with Chrome Knob, Snib and Screws. Cylinders-Matching or other Standard Finish. Packed with matching screws.

FLAT STEEL STRIKE AVAILABLE ON REQUEST FOR DOORS OPENING OUT

mounting instructions and accessories

No. 213

STREAMLOCK DEADBOLT With Long Throw Bolt OPERATION: From outside byey action Brass Bolt with

MATERIAL: Case and

Sureast rom

SIZE:

BO

Solid

%" throw.

StrikePres

High Purity

CER

BrasS.

Case 3.11/16" x Backset, 28".

24"x

1-1/16".

DOOR THICKNESS: 14" Minimum. CYLINDER AND KEYS:5-Pin Tumbler Solid Brass Cylinder with 2keys. Key Blank Number K1054S.

FLAT STEEL STRIKE AVAILABLE ON REQUEST FOR DOORS OPENING OUT

OCKWOD

Key Changes 78,000.

Master-keyed, Grand Master-keyed or Keyed Alike to any other Lockwood Lock having the same Key Blank Number. FINISH: Case and StrikeSatin Nickel, Bright Chrome, Satin Chrome amel with Chrome Tim. cylinder-Matching or other Standard Finish. Packed with matching sCrews, mounting instructions and accessories.

SPECIAL KEYING: Can

"LOCK

UP

WITH

be

LOCKwooD''

ALL LOCKWOOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED

AGAINST FAULTY MATERIALS AND WORKMANSHIP

NIGHT LATCHES

5

No. 200

"Warrostile

(Reg d)

STREAM

LATCH Short Backset

OPERATTON: From outside by key. From inside by knob. Bolt may be held retracted or deadlocked by Snib trom inside so that key will not operate. Reversible Brass Bolt with 9/16" throW. and Strike--- Pressure

MATERIAL: Case Cast

Alloy.

from High

Bolt- Solid

Purity

Brass.

CERT1ZINC

SIZE: Case 2-11/16" x 214 x 16". Backset DOOR THiCKNESS: 114" Minimum.

CYLINDER AND KEYS:

Key Changes 7R 00

Tumbler

Solid,ASS Blank Number K1054S.

5-pin

ey

1".

SPECIAL KEYING: Can

be Master-keyed, Grand Master-keyed or Keyed Alike to any other Lockwood Lock having the same Key Blank Number. FINISH: Case and Strike -Satin Nickel, Bright Chrome. Satin Chrome, or Brown Enamel with Chrome Trim. Cylinder-Matching. or in other Standard Finish. Packed with matching serews, mounting instructions and accessories.

FLAT STEEL STRIKE AVAILABLE ON REQUEST FOR DOORS OPENING OUT.

No. 201

NIGHT LATCH

OPERATION: From outside by key. From deadlocked by snib

nseor

frominside,

so that key will not operate. Reversible Brass Bolt with

9/16" throw. MATERIAL: Case and Strike-

Pressure Cast

from High Purity CERTTZINC Alloy.

Bolt-

Solid Brass. x 1". Backset 2%".

SIZE: Case 3%" x 24" DOOR THICKNESS: 14" Minimum.

Brass CYLINDER AND KEYS: 5-pin Tumbler Solid K1054S. Cylinder with

2

Keys.

ey

BlankNumber

be Master-keyed. Grand Master-keyed or to any Lockwood Lock having the same Key Blank

SPECIAL KEYING: Can Keyed

Alike

Number.

FINISH Case and Strikedard Finishes.

Baked Brown Enamel.

ylinder

AIl Stan

Packed with matching screws, mounting instructions and accessories.

FLAT STEEL STRIKE AVAILABLE ON REQUEST FOR D0ORS OPENING OUT.

LOCK

UP

WITH

LOCKwooD'

ALL LOCKwOOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

CKWOD

STANDARD NIGHTLATCH No. 100

NIGHT LATC H

OPERATION: From outside by key. From inside by knob. Bolt may be held retracted by turning knob in clockWise direction. Reversible Bolt

with

"

throw.

MATERIAL: Case, Strike, Bolt.and Cylinder ressureast from High Purity CERTIZINC Alloy. SIZE: Case 35" x 24" x 1". Backset 2%". DOOR THICKNESS:

14" minimum.

CYLINDER AND KEYS: 5-pin Tumbler Cylinder with 2 Keys. Key Blank Number K1054SR. Key Changes 78,000. SPECIAL KEYING Can be supplied keyed alike, but not masterkeyed. FINISH: Case and Strike- Baked Brown Enamel. Cylinder- AlI Standard Finishes.

Packed with matching sCrews, mounting instructions and accessories.

FLAT STEEL STRIKE AVAILABL.E ON REQUEST FOR DOORS OPENING OUI

DEAD BOLTS AND DEADLOCKS

No. 203

DEADBOLT OPERATION: From outside by key. From inside by

knob. Locked by turning key clockwise, and unlocked by turning8 key anti-clockwise. Key is removed by returning it to the original position. Strike is specially designed for Sliding Doors, or Doors opening inwards. Case, Strike and Bolt- Pressure Cast from High Purity CERTIZINC Alloy.

MATERIAL:

SIZE: Case 44"

x 276" x

6".

Backset 2%".

CYLINDER AND KEYS: Cylinder with

2

5-pin Tumbler Solid Brass Keys. Key Blank Number K1054S.

Key Changes 78,000.

SPECIAL KEYING: Can Key Blank Number.

be

Master- keyed, Grand Master-keyed or Keyed Alike to any other Lockwood Lock having the same

FINISH: Case and Strike- Satin Nickel, Bright Chrome, Satin Chrome or Bruno. Cylinder- Matching, or any other Standard Finish.

Packed with matching screws, mounting instructions and acceseories.

OCKNOoD

LOCK

UP

WITH

LOCKWooD''

ALL LOCKwoOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

FOR SHOPS, GARAGES, SLIDING DOORS No. 204 DEADLOCK outside only. by key. Cannot be operated from inside. Locked by turning key clockwise, and unlocked by turning key anti-clockwise. Key is removed by returing lo the original position. Strike is specially designed for Sliding Docrs, or Doors opening inwards. This Deadiock is spccially recommended for "lock-up" shops. storerooms, etc. MATERIAL: Case, Strike and Bolt- Pressure Cast from High Purity CERTIZINC Alloy.

OPERATION: From

it

SIZE: Case 44"

x

2%"

x

%".

Backset 23%".

CYLINDER AND KEYS: with

2 78,000.

SPECIAL KEYING:

Key Blank Number.

FINISH:Case

and

Finishes.

5-pin Tumbler Solid Brass Cylinder Keys. Key Blank Number K1054S. Key Changes

Can be Master-keyed, Grand Master-keyed or Keyed Alike to any other Lockwood Lock having the same

Strike-Satin Nickel, Bright Chrome,

Satin Chrome or Bruno.

Cylinder- Matching or

any other Standard

Packed with matching screwS. mounting instructions and accessories.

No. 205 DEADLOCK OPERATION: From

outside by key. From inside by key. Locked from outside by turning key clockwise, and unlocked from outside by turning key anti-clockwise. The reverse applies when lockng or unlocking trom inside.Strike is specially designed tor Siding Doors, or for Doors opening inwards. Key is remcved by returning to original position. This double-cylinder Deadlock is specially recommended for "lock-up shops, storerooms, etc., where internal locking security is desired.

MATERIALS:

Case, Strike and Bolt -Pressure Cast from High Purity CERTIZINC Alloy.

SIZE: Case 44" x 26" x %". Backset 296". CYLINDER AND KEYS: Internal and External Cylinders are S-pin Tumbler Solid Brass, with 2 Keys only. Key Blank Number K1054S. Key Changes 78,000.

SPECIAL KEYING: Can

be

Key Blank Number.

FINISH:

Case and

Master-keyed, Grand Master-keyed or Keyed Alike to any other Lockwood Lock having the same

Strike-Satin Nickel, Bright Chrome,

Finish on External Cylinder.

Satin Chrome or Bruno. Cylinders

Matching. or any other Standard

Packed with matching screws, mounting instructions and accessories.

LOCK

UP

WITH LOCKwoOD'

ALL LOCKWOOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

OCKUDOD

EXTRUDED BRASS LATCH HANDLES AND KNOCKERS

No.

301

No.

302

No.

No. 303

No.

304

341

343

No.

No.'s 301, 302 & 341 LATCH HANDLES No.'s 303, 304 & 343 D0OR KNOCKERS SECRET sCREWING FROM THE BACk OF THE DoOR RESISTANCE.

ProvDES THE ADDED ADVANTAGE

OF BURGLAR

Beautifully-designcd Door Furniture in Solid Extruded Brass. Available, in all Standard Lockwood Finishes. Latch Handles Nighntlatch or DeadlocFlatesare mountewithout wo0u screwS anaarenea and KnoCKers are ror usewith any Lockwood as one screw. is

npositionby the Lock, ylinder and heagauge metal-thread ush with the surface ot the plate, ensuring absolute security. x 1%". PLATE SIZES: 301 to 304-94" x 24"; 341 to 343 8

No Cylinder Ring

required,

the

Cylinder hts

Fitting templates, matching screws and accessories supplied with all units.

No.

No. 42

LATCH HANDLE

No.345

305

No.

No.

06

346

PULL HANDLES

PUSH PLATES

Beautifully designed with smooth, modern lines in Natural Anodised Aluminium.

Made from Solid Brass Extrusion identical to that used for Latch Handles and Knockers, Push Plates and Pull Handles are secured with four wood screws of matching colour, supplied.

Durable, weather-resistant.

PLATE SIZES:

Plate size

8/"

x

1/4".

OCKUO

and

306-96"

x

26":

and 346

84"

17s". Fitting templates, matching screws and accessories supplied with each unit. 305

345

x

UP WITH LOCKWoOD'' LOCK PRODUCTS

ALL LOCKwOOD ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

No. 310, 317 & 319

No. 344

Machine Cast

ENTRANCE DOOR SETS

KNOCKER

Brass Entrance

DOOR

Solid, Extruded Door Plates, fitted with Round Knob Furniture, are deSigned for use with

p-to-the-minute, streamlined Door Knocker in Pressure Cast, Highest Quality Zinc alloy. For usewith alockwood Round Cylinder Nightlatches and Deadlocks, the No.344 Knocker is, available in Satin Nickel, Bright Chrome and

310

317 & 319

Lockwood No. Tubular Mor:

5521

tice

Latches,

and

OCWoOd

and nes nder

KOuna

Satin Chrome finishes.

Deadlocks.

ILLUSTRATIONS BELOW ARE FROM OTHER LOCKWOOD PRODUCT RANGES, DETAILS OF WHICH APPEAR IN SEPARATE CATALOGUES AND LEAFLETS AVAILABLE ON REQUEST

No. 590

No. 570

SHORT BACK SET CYLINDER MORTICE DEADLOCKS For hinged

SERIES CYLINDER MORTICE

LOCKS and

LATCHEs

or sliding metal or wooden doors

(Refer 570-590 Catalogue)

No. 403 & 404

HYDRAULIC DOOR CLOSERS Refer Hydraulic DC Leaflet)

LOCK

UP

WITH

No. 520 Series

KEY-N-KNOB CYLINDRICAL LOCKSETS (Refer 520 Key-N-Knob Leaflet)

LOCKWooD'

ALL LOCKwOOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

CKUODD

10

SCREEN

DOOR

LATCH ES No. 300 SERIES

TYPES: No. 300/1, External Knob, Short Spindle. No. 300/4, External Knob, Long Spindle. No. 300/101, External Lever Handle, Short Spindie. No. 3C0/104, Ex ternal Lever Handle, Long Spindle. DOOR THICKNESSES: Short SpindleMin. 4", Max. 16". Long Spindle- Min. Max. 14".

1".

by knob or lever handle. From inside by lever. Bolt may be held retracted, or dcadlockcd by snib from inside. Reversible Bolt with 5/16" throw,

OPERATION: From outside

300/101

300/

300/104

300/4

Case, Bolt and Lever Handles Cast from High Purity CER Alloy. Escutcheon, Spindlè and

MATERIAL: Pressure

TIZINC

Strike-Steel.

SIZE: Case 1-15/16" x Diameter

14*"x 4".

Knob

1".

1-19/32". Escutcheon 4" x Backset 14", Projection from Door- Knob 14", Lever 1-5/32".

FINISH: Satin Nickel. Bright Chromc. Satin

BOX STRIKE

BACKCASE ASSLY.

Chrome, or Brown, Silver or Black Enamel.

Packed with matching screws, mounting structions and accessories.

NOTE: Box Strike

307 No. SCREEN DOOR

sT

available on request, to

the Screen Door Latch Backcase assembly to be used as a Cupboard Latch.

allow

FLAT STRIKE

is

1F

TOUCH LATCH or ideal for Screen Wire Doors

oor

o he handle

other communicating doors,

to open the door, and a touc

o

Together with No. 300 and 300/101 illustrated above, this latch is a perfect mate for the Lockwood 401 or 402 Door Closcr, which makes closure automatic. Minimum Door Thickness 4".

No. 307

FINISH: Bright Chrome.

Packed with matching screws. mounting instructions and accessories.

EKUID

in-

'LOCK

UP

WITH

LOCKwooD'

ALL LOCKWOOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

DOOR CLOSERS and DOOR HOLDERS

11

No. 401.

PNEUMATIC

DOOR CLOSER

Ideal for Screen Wire Doors, mated with Lockwood Screen Door Latclhes, the No. 401 Door Closer meets all requirements for doors up to 40 lbs. in weight. With Hold-open feature. TUBE: Heavy Seamless Steel Tube. SPRING: Internal Steel Coil Spring. ADJUSTMENT: Finger-operated Control Valve gives complete range of closing speeds. Incorporating exclusive piston and valve assembly. Available in Brown or Silver Enamel Packed with matching screws. mounting instructions and accessories. Easily disassem bled for renovating. etc.

No. 402

PNEUMATIC

DOOR CLOSER

For heavy Screen and light to medium Internal Doors. This closer solves all the light to medium door problems of smooth, a positive action. quiet closure with Heavy seamless steel tube. Hold-open feature. Available in Brown and Silver Enamel. nternal siel coil spring. Easily disassembled for renovating, etc.

No. 400

PNEUMATIC DOOR CLOSER

on medium internal deors in etc., the No. 400 operates on a powerful spring and pneumatic recoil principle ideally suited to its purpose. Heavy scamless steel tube. Brown and Silver Enamel, Satin Nickel or Bright Chrome finishes. Suitable for doors up to 70 lbs. in weight. Available porating ratchetless spring-tension adjustment, and piston valve assembly. Hold-open feature. Packed with matching screws, mounting instructions and accessories. designed for use Specially omes

and offices,

in

440. No. FULLY CONCEALED

DOOR HOLDER oVERHEAD

FITS COMPLETELY WITHIN THE DOOR

TYPE)

OPERATION: The No. 440 Door Holder may be fitted to the top rail of doors from 14" to 2%" in thickness, and positioned to hold the door open at any one of the following angles: 85. 90", 100°. or 110°.

Single or double-acting type and non-handed, it is suitable for Right or Left Hand Doors opening In or Out, and for doubleacting Centre-Pivot Doors. The Control Arm and Guide Block slide freely and silently the concealed Guide Rail until the, door is opened firmly the predetermined "hold-open" angle. Its action is positive, and when the door is closed the unit is completely concealed. to MATERIAL: Guide Rail and Guide Block are of Solid Brass Extruded Channel Section. Arm and Jamb BracketElectroplated Steel. Buffer Spring and Snap-lock Springs High-grade Spring Steel. Packed with complete Fitting Instructions and Mounting Screws APPLICATIONS: Particularly suited for interior doors in classrooms, hospital utilities and supply sections, stores, ofices, public huildings. hotcis. motels. ctc. (For further details. obtain special leatlet.)

in

LOCK

UP

WITH

LOCKWoOD''

OCKUD

ALL LOCKWoOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

12

MORTICE LOCKS No. 5401 MORTICE LOCK

Heavy-Duty Double Forend Latch Bolt either side. Deadlock Bolt bolts have 13/32" throw. latching spring. When the the knob hub is returned

OPERATION:

by

Knob

or Lever Handle

from

by Bit Key from either side. Both

The latch bolt is operated by a bolt is latched through the spindle, by an independent return spring.

MATERIALS: Cover Plate available in either Brass or Steel. Both Bolt Heads Solid Brass extruded section. Knob HubSintered Iron. Key- Malleable Iron, and all other parts are

of Steel.

KNOB HUB: The Knob Hub is made of oil-impregnated sintered iron, which is a bearing material of high-tensile strength and practically unlimited wear resistance. The spindle hole will accept a standard .300" square spindle. TO SUIT

SPNDLE

used allow 55 different key changes, and one key per lock is supplied. Locks can be Keyed Alike, but not Master-keyed.

KEY CHANGES: Key Codes

of

DIMENSIONS: Morticing and other relevant dimensions the No. S40 Mortice Lock and Strike are shown at left. The

540/1 Steel 540/7 Brass

tandard backset of 2%" is the same Lockwood Locks.

as

all other standard

FINISH: Cover Plate and Strike-Florentine Bronze, Satin Nickel, Bright Chrome or Satin Chrome. Bolts-Natural Brass.

Individually packed with matching screws in polythene bag. Six locks per display carton.

ILLUSTRATED BELOW ARE

4 COMBINATIONS OF 540

MORTICE LOCK WITH FINELINE & THUNDERBIRD FURNITURE

Comprises No. 1100 "FineHandle with

ineLever Ong

Paeuc No.

Mortice

I

5401

OCKlIOD

Comprises No. 1104 "FineLever Handle and with 3110

Comprises No. 1105"Thun-

with No. 5401 Mortice LoCK.

Lock.

line

E and1110Ke ased

aetogether

LOCK

UP

with No. 5401 Mortice

WITH

Comprises Knob and

Wth

401

ll

1106"Milford" Rose tosether

"Miltord

Oused with Mortice LocK.

LOCK WOOD'

ey No.

ALL LOCKWOOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

TUBULAR LATCHSETS M0550

M0560

No. MOS50 Tubular Latch incorporates Sturdy Wrought Steel Knobs and ROses with the Heavy Duty No. 5521| Tubular Latch 11ustrated below right.

No. MO560 Tubular Locking Latch is identical with the Tubular Latch, but with the added Locking Feature.

13

No. 5521 HEAVY DUTY TUBULAR LATCH SOLID BRASS BOLT

Smooth action, Quality and Craftsmanship combine in this mortice latch for use on interior doors with knobs or lever handles. Universal for R.H. and LH. Doors. Case size 36" long fitting into 76" diameter hole. Backset Face Plate 24" x 1". Bolt Head Solid Brass. Nylon Knob Hub. Case and internal mechanism pressed steel. Mechanism, double spring action, provides easy bolt and hrm knob action. FINISH: Satin Nickel, Bright Chrome, Satin Chrome. Packed with matching screws, mounting instructions and accessories.

2".

01

No. 5521

Comprises No. 1104 "Fineline" Lever

Comprises 1105 "Thunderbird" Knob

Handle and Short Plate, used with

and Rose,

No. 5521 Mortice Latch.

Mortice Latch.

LOCK

UP

WITH

together with No.

LOCK WOOD''

ALL LOCKWOOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

S521

OCKUD

14 MACHINE CAST

LOCKSET FURNITURE "Fslne

"

No. 1100 LOCKSET WITH sPRING LOADED LEVER HANDLE AND LONG PLATE cONCEALED MOUNTING SCREWS)

These

beautifully-desigped

and

finished

"Fineline"

Lever

Handle Locksets are strongly built and incorporate a positive and smooth spring-loaded mechanism on the lever handles to return them to horizontal when at rest.

Concealed Mounting Screws are fitted from the inside of the

door and home into threaded bosses in the outside plate,

making it impossible for the Lockset to be tampered with from outside the door.

Dimensions of the "Fineline" Long Plate Lockset, shown at the left, are designed to fit the Lockwood No. 5401

Heavy-duty

Mortice Lock (illustrated on the previous page).

FINISHES: Bruno, Chrome Plate and Satin Chrcme Plate. PACKED: Two

(2) sets per box with

matching screws and

accessories.

No. 1100

MACHINE CAST

"Fnelne"

No. 1104

LATCHSET wITH SPRING LOADED LEVER HANDLE AND SHORT PLATE

(CONCEALED MOUNTING SCREWS)

Except for the shorter plate and the absence of a keyhole, this latchset is identical in design and opcration to the long plate lockset illustrated above, and is especially designed for use with the Lockwood No. 5521 Tubular Mortice Latch (illustrated on the previous page). FINISHES: Bruno, Chrome Plate and Satin Chrome Plate. PACKED: Two (2) sets per box with matching screws and accessores,

No. 1108 MACHINE CAST "Fineline" LATCHSET WITH SPRING LOADED LEVER HANDLE AND SHORT PLATE

No. 1104

(WOOD SCREWS BOTH SIDES)

This Latchset

is

identical to

No.

for both inside and outside of the mounting screws cannot be used.

CKWOD

LOCK

UP

WITH

1104, illustrated

door-where

LOCKwoOD''

on

this

concealed

ALL LOCKwoOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

15

LATCHSET FURNITURE

MACHINE CAST

LATCHSET WITH ROUND KNOB AND ROSE

"Thunderkind"

No. 1105

(CONCEALED MOUNTING SCREWS) SERIES PASSAGE LATCH: hunderbird nob and Rose. Is designed to match he the Lockwood 520 Series hunderbird Key-N-Knob Locksets, when used With the Tubular Mortice Latch as a latchset,

MATCHING

520

or when

used with the No. 5401 or similar types of Mortice Lock as a LocKSet. Special Key Escutcheons (as illustrated below), are used in conjunction with the "Thunderbird" Knob and Rcse when used with a Mortice Lock. The set is supplied with a .300" square steel spindle.

FINISHES: Bruno, Chrome Plate and Satin Chrome Plate. PACKED: One (1) set per box with matching screws and accessories.

No. 1109

(WITH woOD SCREWS)

This is identical

No. 1105

LATCHSET to te No. 105 Knob and fitted to take, wood screws

"Thnderbird"

Rose, except that where the use of not practicable.

1

both Roses are the concealed mounting principle

is

No. 1106 WROUGHT STEEL

"Mfend" LATCHSET WITH ROUND KNOB AND ROSE

This Latchset, similarly to that above,

is

intended

for

O

use

separate Tubular or, escutcheon, can be uscd with Mortice Locks of the No. 5401

with

Latches,

together

with

a

key

type.

FINISHES: Bruno, Chrome Plate

PACKED: Six

(6) sets per

and Satin Chrome

Plate.

box with matching screws and

accessories.

No. 1106

No. 1110

is

designed Key Hole Escutcheon to match "Fineline" Lever Handle Short Plate for use with Mortice

Machine-cast the

Locks.

FINISHES: Bruno, Chrome Plate

PACKED with matching screws.

and Satin Chrome

No. 1111

Plate.

for

use with either Pressed Steel Keyhole Escutcheon "Thunderbird" or "Milford" Knob and Rose when fitted with Mortice Locks. FINISHES: Bruno, Chrome Plate and Satin Chrome Plate. PACKED with matching screws.

LOCK

UP

WITH

No. 1110

L0CKWO0

ALL LOCKWOOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED

AGAINST FAULTY MATERIALS AND WORKMANSHIP

No. 1111

OCKUOD

16

SASH LOCKS AND LIFTS No. 853 SASH

LOCKS

JEMMYPROOF

FOR DOUBLE HUNG WINDOWS Powerful cam mechanism locks together, making window

sashes

emmy-proof, draught and rattle proot.

853

No. 853/4 SASH

LOCKS

FOR HOPPER, AWNING AND CASEMENT WINDOWS Fitted with a pull catch for use in drawing the window closed.

853/4

USE LOCKWOOD_SASH LOCKS

LOCKWoOD SECURITY!

FOR

FINISHES: Florentine Bronze, Satin Nickel, Chrome.

890-891

No. 890 & 891 SASH LIFTS MATERIAL: Solid extruded SIZES: No.

890,

PROJECTION:

brass.

14" x 15/16"; No. 891, 214" x 15/16".

4".

FINISH: Florentine Bronze, Satin Nickel, Bright Chrome, Satin Chrome. Packed (12 to box)

OCKUD

LOCK

UP

WITH

LOCKwoOD'

ALL LOCKWOOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

STANDARD PADLOCKS

17

No. 225 PADLOCK

Popular priced Disc. Tumbler PADLOCK SHACKLE DIAMETER: 4".

MATERIAL:

Case

Zinc Alloy.

MECHANISM:

High

purity Pressure Cast

Disc Tumbler.

5

SHACKLE: Steel, for 225B).

Case Hardened and Plated (except

SIZE: Case height, 14"; width, 14".

SHACKLE OPENINGS: 225 225B

225L-

Bicycle Shackle,

KEYS: Two. 960.

but not masterkeyed.

4".

54".

Key blank No.

SPECIAL KEYING: Can

Steel Shackle,

S 1054B

Key Changes

be supplicd

keyed alike,

225

225L

FINISH: Hard baked enamel.

No. 226 1% INCH DISC MATERIAL: TUMBLER PADLOCK Width, Case, Height, 15/16".

SHACKLE:Steel

D

opening.

".

Laminated

Case

Steel.

Hardened.

1".

Diameter, 9/32".

MECHANISM: 5 Disc Tumbler. SHACKLE OPENINGS: 226 226A- 1*". 226-34. Blank Key No. KEYS: Two. KEYING: Key changes 960. Standard keying to differ.

%",

Can be Keyed alike, not masterkeyed.

226

FINISH: Bright Electro Plated.

No. 227 2 INCH DISC TUMBLER PADLOCK MATERIAL: 1-11/16".

Case, Laminated Steel. Width, 2". Height,

SHACKI.E: Steel. Opening. I5/16". MECHANISM:

Case Hardened.

6 Disc Tumbler.

both sides of shackle.

Diameter, 11/32". Rotary bolt locking

KEYS: Two. Key Hlank No. L1054C. Key Changes 3,000. Standard Keying to differ. Can be keyed alike, not masterkeyed.

KEYING:

227

FINISH: Bright Electro Plated.

LOCK

UP

WITH

LOCKwoOD''

ALL LOCKWoOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

OCKWOD

18

sOLID BRASS PADLOcKS No. 232 1 INCH

sOLID BRASS PIN TUMBLER PADLOCK

MATERIAL:

Case. Solid Extruded Brass. Width

SHACKLE: Steel,

No. 252-Steel. Opening

also case

Height

1".

Case Hardened, or Solid Brass. Diameter, 7/32"

No. 232A-Steel. No. No.

1".

2".

Opening 232B- Brass. Opening 232AB- BrasSs. Opening I". available in extended shackle of hardened steel.

".

1"

opening, in either brass or

4 Pin Tumbler. All component parts are non-ferrous and rust-proof. Bolt and Bolt Springs are protected against picking by a Pick-proof plate.

MECHANISM:

KEYS: Two. Nickel Silver Key Blank No. X1054BK. Changes 2,100. Standard Keying to Differ. Can be keyed alike, not masterkeyed.

KEYING: Key

No. 234 1% INCH

FINISH: Natural Brass. Satin finish.

sOLID BRASS PIN TUMBLER PADLOCK

MATERIAL: Case SHACKLE: Steel

Solid Extruded Brass. Width,

ARDEN

Case Hardened or Solid Brass.

Diameter, 11/32". No. 234-Steel. Opening 4". No. 234A-Steel. Opening No. 234B-Brass. Opening 4" No. 234AA-Steel. Opening 1%". No. 234AB- Brass. Openingg Also available in special extra-long shackleof 34 opening in either brass or case-hardened

".1".

steel.

All

5 Pin Tumbler. component parts are, non-ferrous and rust-proo.. Bolt and Bolt Spring are protected against picking by Pick-Proof Plate

MECHANISM:

KEYS:

Two.

Nickel Silver.

Key Blank No.

KT0545.

KEYING: Key Changes

78,000. Standard Keying differ. Can be master-keyedin groups, Grand master-keyed. keyed alike, etc., to any other Lockwood Lock having the same Key Blank Number. FINISH: Natural Brass, Satin finish. NOTE: No. 234A illust rated (inset) smaller than actual size.

to

OCKWODD

'LOCK

UP

WITH

LOCKwoOD''

ALL LOCKwoOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

SOLID

BRASS

PADLOCKS

No. 245 2 INCH SOLID BRASS DEADLOCKING

19

AARDEN

PIN TUMBLER PADLOCK MATERIAL: 17%".

Case. Solid Extruded Brass. Width, 2".

SHACKLE: Steel,

Height,

Case Hardened, or Solid Brass. Diam.,

No. 245-Steel. Opening 19%c". Steel. Opening No. 245A No. 245B--Brass. Opening 1iu".

s".

-

1". No. 245AB-Brass.-Opening 1". shackle Also available in special extra-long

in either brass or case-hardened steel.

MECHANISM:

5

of

34

opening

RD

Pin Tumbler. All component parts are

non-ferrous, and action (illustrated with Solid Bronze be removed while

Double-Locking rust-proof. above, inset) locks both legs of shackle balls. Locks only with Key, which cannot padlock is open.

KEYS: Two. Nickel Silver. Key Blank No. K1054S.

KEYING: Key

Changes 78,000. Standard Keying to Differ. Can be master-keyed in groups, Grand Master-keyed or keyed alike, etc., to any other Lockwood lock having the same Key Blank Number.

FINISH: Natural Brass. Satin finish. IMPORTANT: The No. 245 is a Heavy Duty Top Security Padlock.

No. 245A 2 INCH with LONG STEEL SHACKLE

(Specifications

see

LARUO

above.)

LOCK

UP

WITH LOCKWooD'

ALL LOCKwoOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

OCKlWO0

20

MANUFACTURERS' SUPPLIES OR MACHINE LOCKWOOD No. 270 coIN CABINET LOCK 270-4

270-3

270-1

The Lockwood 270 Series Locks employ the 5-Disc Tumbler locking mechanism, and are manufactured from high-quality Pressure-cast Zinc Alloy. The large range of Zinc and Pressed Steel operating cams make this lock adaptable to a wide variety of applications and

functions. These special-purpose cams, several of which are illustrated below, are designed to operate at various angles, with either 90, designed to client's specihcations where guantities warrant. be can 80 or 360 travel.Cams may be supplied with the key being removed in the locked or unlocked position, as required. the case of the 90, tun, locks, KEYING: No. 270 locks can be Keyed to Differ, or Keyed Alike. but not Master Keyed. KEYS: Two keys per lock are supplied unless otherwise specified.

In

60 KEYiANGES; Standard Finish, Bright Chrome. FINISH: DIMENSIONS: CylinderLength

Nut- Hex. 4"

CAM PLATE 270-1

from base of

across flats,

CAM PLATE 270-23

4"

x 26

head.

Diameter

T.P.I.,

CAM PLATE 270-33

%e"

gtn. thick.

*

LOCKING LEVER 270-14

across flats.

LOCKING LEVER 270-24

0 9 864 01 1OCKING LEVER 270-54

LOCKINGLEVER 270-64

LOCKING LEVER 270-74

LOCKING LEVER

LOCKING LEVER 0-124

SPECIAL-PURPOSE LOCKING PLUGS

LOCKING LEVER 270-44

LOCKING LEVER 270164

a range of special-purpose The 5-Disc Tumbler Barrel Assemblies, or Locking Plugs, illus:raled here are available for use applications, such as Cabinet Locking Handles of Knob or Lever type, Automobile. Locking Petrol Caps, etc., and are designed for supply to the manufacturers of these and other products. All Disc Tumbler locks illustrated on this page can be supplied Keyed to Differ or Keyed Alike. The No. 136 BarTel or Plug can be supplied Master Keyed to special requirements. FINISH: Can be supplied Natural Satin Finish, Bright Polished and Lacquered, or Bright Chrome Plate. KEY CHANGES: No. 225, 960; No. 136, 1,000; No. 158c, 1,000.

in

in

225

BARREL

OCKWIOD

158c

BARREL

'LOCK UP WITH

136

BARREL

LOCK WOO D'

ALL LOCKWOOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

MANUFACTURERS' SUPPLIES

21

No. 137 LOCKING LEVER HANDLE The No. 137 Locking Lever Handle, illustrated here, is manufactured of high-quality

Pressure Cast Zinc Alloy. It employs the Lockwood 5-Disc Tumbler Locking Mechan ism, and locks or unlocks with a 90 turn of the key.

The actuating mechanism also engages or disengages with handle when the assembly is unlocked by the key.

KEYING:

The No.

137 can

be

a

90

supplied Keyed to Differ, Keyed

turn of the lever

Alike or Master

Keyed.

KEY CHANGES: There are 1,000 available Key Changes, and two keys per lock are supplied. unless otherwise specified.

FINISH: Standard Finish, Bright Chrome Plate.

Lockwood No. 131 Series and No. 600 Series

131-5

131-1 nets,

with Dust Cover. No.

round

131/5,

for

steel Or

CYLINDER (ORBOSS):Diameter1/ 131/ 4 FTojection 151/1: MECHANISM:

5-Disc Tumbler.

MATERIAL: BoltSolid

Brass. Case and

Cupboard & Cabinet Locks & Latches

600-1

Cabieel woo

2i

No.

600

600-7

6-LEVER CUPBOARD

Steel. No. 600/7,

CYLINDER (OR

4".

Projection

600/7, 7%".

for Wood. BOsS): Diameter

LOCKS: No. 600/1, for

". Projection600/1,

Brass Levers. solid Brass. Case and Cylinder MATERIAL: quality Pressure-cast Zinc Alloy. Key Guide-Nylon. be Can supplied Keyed to Differ, Keyed Alike or KEYING: Master Keyed in four groups. Two keys per lock supplied

MECHANISM:

6

Bolt-

Cylinder-High-

quality Pressure-cast Zinc Alloy. Differ, or Keyed Alike KEYING:Can be supplied Keyed to but not Master Keyed. Two keys per lock supplied.

KEY CHANGES: 600/1FINISH: Gold Lacquer.

KEY CHANGES: 960. FINISH: Silver Lacquer.

High-

6000.

600/7 -3,600.

No. 280 FILING CABINET LOCK depressed by pushing lock into filing cabinet. Bolt is retracted by turning key 90". MATERIAL: High-purity Pressure-cast Zinc Alloy.

OPERATION: Latch bolt is

FINISH: Bright chrome plate. DIMENSIONS: Length 2", Height

29%a",

MECHANISM: 4-pin tumbler. KEYS: Two keys. Blank No. X1054K. KEY CHANGES: 2,100.

SPECIAL KEYING: Not supplied Keyed

Alike.

'LOCK

UP

supplied

Width

",

Bolt Throw

Master Keyed,

2".

can

be

WITH LOCKwooD'

ALL LOCKwOOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED

AGAINST FAULTY MATERIALS AND WORKMANSHIP

OCKUDD

22

OCKWOOD

SPECIAL KEYING YSTEMS Lockwood Special Keying Systems can be designed to suit the vecurity requirements of any given building. group of buildings. or complete installations. With the large number key changes made available bythe Lockwood Pin Tumbler System, great exibilty of desIgn. variety of locking functions, and maximum locking securiy Is ensured.

of

AIl

A

locks built to same xey)

KEYED-ALIKE SYSTEM

MKA

B

MASTER-KEYED SYSTEM

MK-A A2.

GMK

MK-B

A3.

B1.

MK-C

33.

ey y te neecteaeana imit to the number of Keyed Alike.

locks which can be supplied

MASTER KEYED SYSTEMS (See Diagram "B");| Master Keyed System is one in which each lock has its own individual key, which operates that lock only and no.other, but where each lock is also built to a Master Key which will open all locks in the group Within a Master Keyed System, if required, certain locks may be 8rouped in a section Keyed Alike to a given Service Key, and still subject to the Master Key. GRAND MASTER KEYED SYSTEM (See Diagram "C" Each lock has its own individual key which operates that lock only and noother, but the ocks are divided nto two or more rOurs Each group 1s subject to its own Master Key which opens all locks However, alf locks are also subject to a Grand Master Key which opens all locks in all groups. As with Master Keyed Systems. Keyed Alike groups may also be A

Al.

3

KEYED ALIKE SYSTEMS (See Diagram "A"): Keyed Alike Systems are provided where a number of locks are to same be operatea operales only by that

C2.

C3.

A3. GRAND MASTER-KEYED SYSTEM

included in G.M.K. Systems.

MASTER KEYED-MAISON SYSTEM (See diagram "D"):| This system, is ideally suited for apartment houses, fats, offices or whole buildings, and anows operation of the lock the main entrance or front gate, or the locks on common washrooms or similar conveniences by the individual keys to the apartment ofice. or rooms concerned. operation each apartment, at,once or room has 1ts owD exCus kevewill operate

on

In

to the

entrancedoor or similar lock for

interior of the building or

purpose

to common washroom.

of

access

FIRE AND OTHER EMERGENCIES:

(Front Door, etc.)

MASTER-KEYED-MAISON SYSTEM

FUTURE EXPANSION:

With a Master Key or Grand Master Key rapid access to all sections of your premises may be made by the night watchman. hre brigade, or other authorised personnel in the casc of emergcncy.

there Our records show that Master Keyed Systems row as the firms using them grow a, possibility that additional locks would be required at some future date for the same Master Key as supplied with the original order, an estimated quantity of locks to be added should be specified when the initial order is placed so as Sufficient key changes may be reserved to cater for all requirements in the future. Close co-operation between the client and Oguen Industries Code Control Department

in

f

stage.

KEY NUMBERING AND REPLACEMENT KEYS:

Master Keys. Service Silver, all Special Keying Systems are manufactured from high-grade Nickel order duplicate keys with case able may accuracy and be stamped to client's own requirements. upon production of suitable authority. Locks and Keys SECURITY OF CONFIDENTIAL RECORDS: All Special Keying Orders are routed through the factory by Job Number only, and bear no relationship to the client' s name Ocation. Code numbers used bear no relation to the key cuts they represent, and can be identified only by the Code Controller and his who have no right of access to any manufacturing operation or process. staf, By these means the client's locking security is safeguarded. No unauthorised person inside or outside the plant can avail bimself of information of which be could make improper use. Lockwood keys used in

INTERCHANGEABILITY. In

OCKUD 15M /McL/7 65/51 246

no case do we guarantee against the possibility of interchanges among any

'LOCK

UP

WITH

locks."

LOCKwooD''

ALL LOCKWOOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP Printed in Australia by Mclarens

on

Australian made paper

23

GENUINECKWO0 KEY BLANKS Manufactured from the best-quality materials Each attractive, clearly marked carton contains

the todozen 3

highest standards of accuracy and precision. key blanks, competitively priced.

OCIO0p

KE NICKEL

t

all

KEY DE

OR

SILVER

S-pin stan aard keYwayyinder Locks, No. 234 and No. 245 Padlocks.

To

R

KEY54A)

NICKEL SILVER 1o ht all pln nder way ese nd

N'4D4 Including No.

KEY BRASS OR

VER To fit all 6-pin Stanaara ey er Locks, 6-pn o.

NICKEL SILVER

To nt all 6-pin Re verse Keyway cylinder

Locks,

and

100

Nigntiatch

ocK

No.

245

and Padlocks.

AUST

AUST

136-34

KEY BRASS ONLY To fit No. 136 and No. 137 Lever Handles.

ALUMINIUM

fit

KEY BRASS ONLY To fit No. 280 Filing

KEY BRASS ONLY To fit No. 227 Pad-

TOUGHENED To

(X1054K)

(L1054C)

(S1054B)

No. 225 Padlocks.

Cabinet Locks.

IOCKS.

O

OcKwOOD AUST

(O)

DCKWOOD OCSMOD

wT

AUST

L

(X1054BK)

1054A

KEY BRASS ONLY To nt No.

226 Pad-

locks.

AUST

KEY BRASS OR NICKEL SILVER To fit No. 232 PadOCKS.

(1224F)

ELECTRO-PLATED To

fit

STEEL

No. 600

4"

Cupboard Locks.

(1225EH) ELECTRO-PLATED

STEEL

To fit No. 600

74"

Froectionupboard LOCkS.

540-34

ELECTRO-PLATED ALL. EABLE

CAST IRON 0 MorLocks.

Toce

Where alternative materials are available (i.e. KEY BRASS or NICKEL SILVER), the material required should

'LOCK

UP

WITH

L0CKWO OD'"

ALL LOCKWOOD PRODUCTS ARE UNCONDITIONALLY GUARANTEED AGAINST FAULTY MATERIALS AND WORKMANSHIP

be

specified.

LOCK UP WITH

LOCKwOOD

FOREMOST NAME IN QUALITY HARDWARE BRANCHES AND AGENTS

QUEENSLAND 23-25 Lang Parade, Milton, Brisbane 7-3047

NORTH QUEENSLAND B. J. HORN and CO.

Hugh St., Currajong Townsville 9-2088

NEW SOUTH WALES

Cnr. Marion & Renwick Sts., Leichhardt

56.3114, 3166, 3186,

3191

AUSTRALIAN CAPITAL TERRITORY Civic Centre 89 Petrie

4-4098

t.,

Canberra

sOUTH AUSTRALIA 83

Grenfell St., Adelaide

23-5602

WESTERN AUSTRALIA

NOYES BROS. PTY. LTD. 657 Murray St., Perth 23-2214

TASMANIA Wellington St., Launceston -1441 245 Elizabeth St., Hobart 3-3141 30

OGDEN INDUSTRIES PTY. LIMITED EDWARD STREET, HUNTINGDALE, VICTORIA, 569-0611