298 84 78MB
English Pages 486 [455] Year 2018
Integrating Disaster Science and Management
Global Case Studies in Mitigation and Recovery
Edited by
Pijush Samui Dookie Kim Chandan Ghosh
Elsevier Radarweg 29, PO Box 211, 1000 AE Amsterdam, Netherlands The Boulevard, Langford Lane, Kidlington, Oxford OX5 1GB, United Kingdom 50 Hampshire Street, 5th Floor, Cambridge, MA 02139, United States Copyright © 2018 Elsevier Inc. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or any information storage and retrieval system, without permission in writing from the publisher. Details on how to seek permission, further information about the Publisher’s permissions policies and our arrangements with organizations such as the Copyright Clearance Center and the Copyright Licensing Agency, can be found at our website: www.elsevier.com/permissions. This book and the individual contributions contained in it are protected under copyright by the Publisher (other than as may be noted herein). Notices Knowledge and best practice in this field are constantly changing. As new research and experience broaden our understanding, changes in research methods, professional practices, or medical treatment may become necessary. Practitioners and researchers must always rely on their own experience and knowledge in evaluating and using any information, methods, compounds, or experiments described herein. In using such information or methods they should be mindful of their own safety and the safety of others, including parties for whom they have a professional responsibility. To the fullest extent of the law, neither the Publisher nor the authors, contributors, or editors, assume any liability for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise, or from any use or operation of any methods, products, instructions, or ideas contained in the material herein. Library of Congress Cataloging-in-Publication Data A catalog record for this book is available from the Library of Congress British Library Cataloguing-in-Publication Data A catalogue record for this book is available from the British Library ISBN: 978-0-12-812056-9 For information on all Elsevier publications visit our website at https://www.elsevier.com/books-and-journals
Publisher: Candice Janco Acquisition Editor: Tom Stover Editorial Project Manager: Michael Lutz Production Project Manager: Prem Kumar Kaliamoorthi Designer: Victoria Pearson Typeset by Thomson Digital
Dedicated to Dr. Tarapada Mandal
List of Contributors Ranja Bandyopadhyaya National Institute of Technology, Patna, Bihar, India Behrouz Behnam Amirkabir University of Technology, Tehran, Iran Jitendra Bothara Miyamoto International NZ Ltd, Christchurch, New Zealand Ali Bozorgi-Amiri School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran Lauren Brockie School of Design, Queensland University of Technology, Brisbane, QLD, Australia Leopoldo Carro-Calvo University of Alcalá, Alcala de Henares, Spain Cüneyt Çalişkan Emergency Aid and Disaster Management School of Health, Çanakkale Onsekiz Mart University, Çanakkale, Turkey Nurcihan Ceryan Balikesir University, Balikesir, Turkey Sener Ceryan Balikesir University, Balikesir, Turkey Prashant Kumar Champatiray Indian Institute of Remote Sensing, Dehradun, India Vinay Kumar Dadhwal Indian Institute of Space Science and Technology, Thiruvananthapuram, India Ravinesh C. Deo University of Southern Queensland, Springfield, QLD, Australia Karunakaran Akhil Dev Mahatma Gandhi University; CHAERT (Centre for Humanitarian Assistance and Emergency Response Training), Kottayam, Kerala, India Dmytro Dizhur University of Auckland, Auckland, New Zealand Jayakumar Drisya National Institute of Technology, Calicut, India T.I. Eldho Indian Institute of Technology, Mumbai, India Gianfranco Galli National Institute of Geophysics and Volcanology, Rome, Italy Anthony T.C. Goh Nanyang Technological University, Singapore
xv
xvi List of Contributors
William N. Holden University of Calgary, Calgary, Alberta, Canada Jason Ingham University of Auckland, Auckland, New Zealand Naveen James Indian Institute of Technology Ropar, Punjab, India Sujoy Kumar Jana Department of Surveying & Land Studies, The Papua New Guinea University of Technology, Papua New Guinea Ramakrishna Jayangondaperumal Wadia Institute of Himalayan Geology, Dehradun, India Biju John National Institute of Rock Mechanics, Kolar Gold Fields, India Fariborz Jolai School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran Joice K. Joseph Mahatma Gandhi University; CHAERT (Centre for Humanitarian Assistance and Emergency Response Training), Kottayam, Kerala, India Ayhan Kesimal Karadeniz Technical University, Trabzon, Turkey A.T. Kulkarni Risk Management Solution India Pvt. Ltd., India L. Lourenço University of Coimbra, Coimbra, Portugal Shawn J. Marshall University of Calgary, Calgary, Alberta, Canada Evonne Miller QUT Design Lab, Brisbane, QLD, Australia Mahesh Mohan Mahatma Gandhi University, Kottayam, Kerala, India Silvio Mollo Sapienza University of Rome, Rome, Italy Tatsuya Nogami Japan Fire and Crisis Management Association, Tokyo, Japan A.N. Nunes University of Coimbra, Coimbra, Portugal Takeyuki Okubo Ritsumeikan University, Kyoto, Japan Indrajit Pal Disaster Preparedness, Mitigation and Management (DPMM), Asian Institute of Technology, Thailand Irshad Parvaiz Yanbu Industrial College (YIC), Saudi Arabia Dilip Kumar Pal Department of Surveying & Land Studies, The Papua New Guinea University of Technology, Papua New Guinea
List of Contributors
xvii
A.P. Pradeepkumar University of Kerala, Trivandrum; CHAERT (Centre for Humanitarian Assistance and Emergency Response Training), Kottayam, Kerala, India Zohreh Raziei School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran Mohammad Rezaei-Malek School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran; LCFC, Arts et Métiers ParisTech, Metz, France Thendiyath Roshni National Institute of Technology, Patna, India Ruhizal Roosli Universiti Sains Malaysia, School of Housing, Building and Planning, Malaysia; Northumbria University of Newcastle, United Kingdom Beatriz Saavedra-Moreno University of Southern Queensland, Springfield, QLD, Australia; University of Alcalá, Alcala de Henares, Spain Hakim Saibi United Arab Emirates University, Al-Ain, UAE Sancho Salcedo-Sanz University of Alcalá, Alcala de Henares, Spain Shraban Sarkar Department of Geography, Cooch Behar Panchanan Barma University, Cooch Behar, West Bengal, India Sathish Kumar D National Institute of Technology, Calicut, India Hüseyin KoÇak Çanakkale Onsekiz Mart University, School of Health, Department of Emergency and Disaster Management; Bezmialem Vakif University, Instıtute of Health Science, Disaster Medicine Doctorate Program, Turkey Piergiorgio Scarlato National Institute of Geophysics and Volcanology, Rome, Italy Go Shimada Meiji University, Tokyo, Japan; Columbia University, NY, USA; JICA Research Institute, Tokyo, Japan Fahimeh Shojaei Structural Engineer, Independent Researcher T.G. Sitharam Indian Institute of Science, Bangalore, India Michele Soligo Università “Roma Tre”, Rome, Italy Lailan Syaufina Bogor Agricultural University, Bogor, Indonesia Reza Tavakkoli-Moghaddam School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran; LCFC, Arts et Métiers ParisTech, Metz, France Vikram Chandra Thakur Wadia Institute of Himalayan Geology, Dehradun, India
xviii List of Contributors
Paola Tuccimei Università “Roma Tre”, Rome, Italy Pongpaiboon Tularug Disaster Preparedness, Mitigation and Management (DPMM), Asian Institute of Technology, Thailand Wengang Zhang Chongqing University, Chongqing, China P.E. Zope Indian Institute of Technology, Mumbai, India
Introduction Throughout our history, humans have had to deal with different types of disaster (earthquake, landslide, flood, tsunami, cyclone, etc). The rapid growth of the world’s population has increased both the frequency and severity of disasters. Disasters have exacted a high toll in terms of lives and property. Therefore, development of different techniques for disaster mitigation is an imperative task in human civilization. Any book on disaster has great relevance for human mankind. This book will try to give the advanced techniques for forecasting the occurrence of the disaster. It will be also very helpful for risk analysis. The book will cover the different topics of disaster such as earthquake, landslide, flood, fire, cyclone, etc. It is also expected that the proposed book will open new area of research in disaster mitigation and management. The proposed book will give the new computational techniques for better understanding of mechanism of different disasters. It will also give robust model for prediction of effects of disaster. Practionar engineers always want new techniques for disaster mitigation. The proposed book will serve this purpose. Eminent scientists will give innovation techniques for disaster mitigation. This collection of chapters from several authors will be an excellent analysis of different mitigation strategies. An attempt will be made in each chapter for approaching the problems of disaster more holistically. The proposed book will also cover the effect of social and economic conditions on different disasters. The effect of climate change on disaster will be also discussed. The main contribution of the proposed book will be that it will not only deal with the forecasting and description of the various disasters, but also will stress the management aspect that is, mitigation, preparedness, response and recovery. The nature of disaster management depends on local economic and social conditions. The effect of local economic and social conditions on disaster management will be described. The different techniques for coastal disaster management will also be discussed. Editors will stress the importance of social processes and human–environmental interactions on disaster management. The book will present the contributions of the authors and other persons and covers a wide spectrum of disaster management problems that extend over the last four decades or so. An important focus of the book is on damage reduction through prevention, preparedness, mitigation, response, recovery, rehabilitation and reconstruction. The proposed book will discuss the advantages of past data analysis for disaster mitigation and management. The knowledge from past data analysis will be an important parameter for disaster mitigation and management. Data analysis will be also useful for forecasting of disaster.
xix
Chapter 1
A Risk Index for Mitigating Earthquake Damage in Urban Structures Behrouz Behnam*, Fahimeh Shojaei** *Amirkabir University of Technology, Tehran, Iran; **Structural Engineer, Independent Researcher
1.1 INTRODUCTION Large earthquakes are very destructive and can lead to considerable human and financial loss. In order to reduce the risk posed by earthquakes, pre- and postdisaster strategies are often adopted. While postdisaster strategies respond to an earthquake in order to alleviate the consequences after the fact, predisaster strategies provide resources to support authorities as they work to reduce the associated risks to people, structures, and infrastructure from future earthquake hazards (Baas et al., 2008). These strategies include identifying the points of weakness in elements exposed to a possible earthquake. In other words, preparedness and prevention plans are made to increase the efficacy of operational capabilities. Among the preparedness and prevention plans, a vulnerability assessment of buildings under seismic loads is of paramount importance. From such an assessment, it can be understood whether a building does or does not need to be retrofitted. If the required retrofitting plans impose considerable budget, reconstruction plans might be substituted. Vulnerability assessments of buildings can provide information on the possible weaknesses of different structural systems. Furthermore, it can clarify whether a dictated architectural aspect of a building can make it more vulnerable to damage. If so, a preparedness plan would specifically be provided to address that aspect. From a different point of view, a building that has collapsed following an earthquake can be analyzed in order to discover the reasons for the failure. The results of such an investigation can be employed as a lesson learned when designing structures that could face future disasters. Whether a building is analyzed in order to predict the level of damage in future earthquakes or to understand the reasons for damage sustained, the damage itself is often defined based on an index, where it can be expressed qualitatively or quantitatively. Qualitative-based damage indices (DIs) are classified using qualitative terms, such as “minor damage” or “extensive damage”. When quantitative-based DIs are used, the damage level is given a numerical value, often over a range from 0.0 to 1.0, representing no damage to collapse, respectively. It is possible to combine qualitative and quantitative DIs. A quantitative-based DI is expressed locally or globally, such that a local DI refers to the damage of a single element, whereas a global DI refers to a structure. Whether discussing a local or global DI, it can be accounted for in different ways. Overall, there are three types of DIs: energy-based, displacement-based, and cumulative, the last including both the energy dissipation and the displacement experienced. Hence, it provides more information on the seismic structural response than either the first or second type of DI. A detailed review has been provided by Blong (2003), where the differences between the three types of DIs are highlighted. A cumulative DI is based on three parameters, which are stiffness deterioration (α), strength degradation (β), and the pinching of response (γ) resulting from slippage. One of the best employed cumulative DIs is Park and Ang’s equation (1985), which is a linear combination of normalized values computed for the maximum deformation and the hysteretic energy. This index is used to account for local and global damage by combining the DI computed for different elements, based on the ratio of total energy absorbed (EA) in each story. Although the equation was first developed for reinforced concrete (RC) structures, it can also be usefully employed for other structural types. A modified
Integrating Disaster Science and Management. http://dx.doi.org/10.1016/B978-0-12-812056-9.00001-4 Copyright © 2018 Elsevier Inc. All rights reserved.
3
4 PART | I
Assessment and Mitigation
TABLE 1.1 Damage Categorization Based on Park and Ang’s Modified DI Equation (Stone and Taylor, 1993) Group
Range
Description
1
DI