Image Transfer Workshop: Mixed-Media Techniques for Successful Transfers 9781600611605, 1600611605, 9781440315978, 1440315973

No Fear Transfers If you have never tried image transfers or have experienced image transfer mishaps, thenImage Transfe

206 35 62MB

English Pages 130 Year 2009;2011

Report DMCA / Copyright

DOWNLOAD PDF FILE

Table of contents :
Cover......Page 1
Copyright......Page 3
About the Authors......Page 4
Contents......Page 6
Introduction......Page 8
Glues and Mediums......Page 12
Heat......Page 32
Solvents......Page 52
Everything Else......Page 80
Inspirational Projects......Page 110
Index......Page 128
Recommend Papers

Image Transfer Workshop: Mixed-Media Techniques for Successful Transfers
 9781600611605, 1600611605, 9781440315978, 1440315973

  • 0 0 0
  • Like this paper and download? You can publish your own PDF file online for free in a few minutes! Sign Up
File loading please wait...
Citation preview

CRAFTS

No Fear

Transfers

rienced If you have never tried image transfers or have expe image transfer mishaps, then Image Transfer ep Workshop is for you. This book presents step-by-st techniques for 35 image transfer processes, extensive bine tips for fixing mishaps and examples of how to com transfers in finished pieces of mixed-media art.

THIS COMPREHENSIVE GUIDE FEATURES 35 TECHNIQUES This book focuses exclusively on making transfers—from simple tape and gel medium transfers to more complex and out of the box techniques, like solar silk screens and plastic wrap transfers.

Let Image Transfer Workshop help build your image transfer confidence.

Join the community Authors Darlene Olivia McElroy and Sandra Duran Wilson invite you to learn more and share your image transfer stories, art and

TROUBLESHOOTING Image Transfer Workshop includes extensive answers to help fix problems in transfers gone wrong. You’ll learn what to watch for what to do to get great transfers every time. DUAL STYLES, DUAL APPROACHES The authors’ different styles illustrate how transfer techniques can take on completely different looks. Finished pieces of art for each technique and a section of completely stepped-out projects are sure to inspire you!

inspiration at

imagetransferworkshop.com

Z2509

US $24.99 (CAN $29.99)

ISBN-13: 978-1-60061-160-5 ISBN-10: 1-60061-160-5

UPC

Discover imagination, innovation and inspiration at

Z2509 Image Transfer Workshop CM1 1

mycraftivity.com Create. Connect. Explore.

4/15/09 3:03:59 PM

I m ag e

Tr an sf er Wor ks ho p

Darlene Olivia MCElroy and

Sandra Duran Wilson

NORTH LIGHT BOOKS Cincinnati, Ohio

www.mycraftivity.com

Z2509 pgs 001-009.indd 1

4/15/09 7:10:28 PM

Image Transfer Workshop. Copyright © 2009 by Darlene Olivia McElroy and Sandra Duran Wilson. Manufactured in China. All rights reserved. The patterns and drawings in the book are for personal use of reader. By permission of the author and publisher, they may be either hand-traced or photocopied to make single copies, but under no circumstances may they be resold or republished. It is permissible for the purchaser to make the projects contained herein and sell them at fairs, bazaars and craft shows. No other part of this book may be reproduced in any form or by any electronic or mechanical means including information storage and retrieval systems without permission in writing from the publisher, except by a reviewer, who may quote a brief passage in review. Published by North Light Books, an imprint of F+W Media, Inc., 4700 East Galbraith Road, Cincinnati, Ohio 45236. (800) 289-0963. First edition.

METRIC CONVERSION TO CONVERT

TO

MULTIPLY BY

Centimeters

2.54

Inches

0.4

Centimeters

30.5

Feet

0.03

Yards

Meters

0.9

Meters

Yards

1.1

Sq. Centimeters

6.45

Inches Centimeters Feet Centimeters

Sq. Inches 13 12 11 10 09 5 4 3 2 1

Sq. Centimeters

Sq. Inches

0.16

Distributed in Canada by Fraser Direct 100 Armstrong Avenue Georgetown, ON, Canada L7G 5S4 Tel: (905) 877-4411

Sq. Feet

Sq. Meters

0.09

Sq. Meters

Sq. Feet

10.8

Sq. Yards

Sq. Meters

0.8

Sq. Meters

Sq. Yards

1.2

Pounds

Kilograms

0.45

Kilograms

Pounds

2.2

Ounces

Grams

28.3

Grams

Ounces

0.035

Distributed in the U.K. and Europe by David & Charles Brunel House, Newton Abbot, Devon, TQ12 4PU, England Tel: (+44) 1626 323200, Fax: (+44) 1626 323319 E-mail: [email protected] Distributed in Australia by Capricorn Link P.O. Box 704, S. Windsor, NSW 2756 Australia Tel: (02) 4577-3555

Library of Congress Cataloging-in-Publication Data McElroy, Darlene Olivia. Image transfer workshop / Darlene Olivia McElroy and Sandra Duran Wilson. -- 1st ed. p. cm. Includes index. ISBN 978-1-60061-160-5 (pbk. : alk. paper) 1. Handicraft. 2. Transfer-printing. I. Duran Wilson, Sandra. II. Title. TT880.M156 2009 745.5--dc22 2009003331

Editor: Julie Hollyday Designer: Marissa Bowers Production Coordinator: Greg Nock Photographer: Christine Polomsky, Ric Deliatoni Photo Stylist: Jan Nickum

www.fwmedia.com

Z2509 pgs 001-009.indd 2

4/15/09 7:10:49 PM

dedications From Darlene Olivia MCElroy: To my sister-mom, Lou Taylor, who always believed in me and taught me to dream in color. To the love of my life, Dave Stearns, for his undying support and encouragement. To Marina Farr, my niece and the next generation of artists—go for it, girl.

From Sandra Duran Wilson: To my incredible husband, Mark—you are my greatest inspiration in life and your encouragement, love and support fill my life with color. To my family, who always believed in my artistic path.

acknowledgments Thank you to Bonnie Teitelbaum, our greatest assistant and asset; you kept us on track and provided another perspective. We couldn’t have done it without you and the incredible F+W team. We would like to thank Tonia Davenport for getting us on board; Julie Hollyday, our editor extraordinaire; Christine Polomsky, our photographer, who kept us going and laughing; and thanks to all of our students, who gave us inspiration to create this book.

about the authors Darlene Olivia MCElroy, comes from an old New Mexico family of storytellers and artists. She began making art the first time she found a wall and a drawing instrument. Her grandfather, a painter on Catalina Island, was her mentor and taught her to play and experiment with art. Darlene attended the Art Center College of Design in Pasadena, then worked as an illustrator both in the U.S. and in Paris. The influence of her background and her travels is evident in her art. She lives and works in Santa Fe and creates new life stories with her husband Dave, her three dogs, Oso, Taco and Bernie, and two birds.

Sandra Duran Wilson has been painting since she was very young, when she went on location with her great-aunt, the Texas landscape artist Santa Duran, to paint the Spanish missions and landscapes around San Antonio where she grew up. Sandra came from a family of artists and scientists, so both views of the world influence her. She often looked through her father’s microscope and painted what she saw. She holds degrees in both science and fine art, which provides the foundations of her explorations and experiments in art. Sandra’s home and studio are in Santa Fe, where she shares her adventures with her husband Mark and their feline friends Muki and Niki.

Z2509 pgs 001-009.indd 3

4/15/09 7:11:00 PM

Z2509 pgs 001-009.indd 4

4/15/09 7:11:14 PM

co nt en ts Introduction / 6 How this book is set up / 8

Glues + Mediums / 10 Clear Contact Paper or Clear Packing Tape \ 12 Direct Gel, Gesso and Caulk \ 15 Dry Gel, Gesso and Caulk \ 17 Gel Skin \ 20 Digital Ground \ 22 Paint \ 24 Transparency With Gel \ 26 Transparency Glued On \ 28

Heat / 30 Fusible Web \ 32 Fabric Crayons \ 34 Heat Tool \ 36 Homemade Ink-Jet Fabric \ 38 Iron-On Sheets \ 41 Liquid Polymer Skin \ 43 Plastic Heat \ 45 Polymer Clay \ 48

Gum Arabic \ 60 Lazertran With Polymer Medium \ 64 Lazertran With Turpentine \ 67 Preserve It \ 70 Transfer Ink \ 72 Wintergreen Oil \ 75

Everything Else / 78 ExtravOrganza \ 80 Gelatin Print \ 82 Jacquard Cotton \ 85 Reverse Monoprint \ 87 Rusting \ 91 Solar Silkscreen \ 93 Stencil \ 97 Transparency With Water \ 99 Water Slide Decal \ 102 Yupo Skin \ 105

Inspirational Projects / 108 Parade \ 110 Poetry of the Garden \ 114 Autumn Walk \ 118 Magic Carpet Ride \ 122

Solvents / 50 Blender Marker \ 52 Crystal Clear \ 55 Gampi/Silk Tissue \ 58

Z2509 pgs 001-009.indd 5

Resources / 126 Index / 127

4/15/09 7:11:26 PM

Z2509 pgs 001-009.indd 6

4/15/09 7:11:52 PM

in troduc ti on

Writing this book has been a fun-filled adventure for us exploring familiar techniques and discovering new ones in the process. We played, laughed, wondered why, scratched our heads and howled at some of our bloopers. We complied 35 techniques to transfer images. Transfers can add another layer of texture, imagery and mystery to your composition. They are great ways to use family photographs, create original journal or book pages, enhance artwork and even create jewelry. As artists we have very different styles, so we wanted to illustrate how the same methods could accommodate those diverse styles. Artists of all mediums, from journals and scrapbooks to quilting, jewelry, sculpture and painting, will find inspiration in art born from transfers. We explore transfer techniques that use materials that you may have on hand, such as freezer paper and plastic wrap, as well as options that use copy machin es and printmaking methods. Some of the techniques, like gel and gesso transfer s, have been around for a long time and are still proven methods to get a consiste nt result. Some of the techniques that worked in the past, like water and ink-jet photo transfers, do not work well now due to changes in technology. We have found alternative methods and have even come up with some new variations on transfer s. Some techniques render similar results, leaving you to wonder, “Why would I use this method instead of that one?” The answer may depend on the supplies you have on hand or a personal preference. We evaluate when a method isn’t working and provide tips for altering and enhancing your transfers. There are basic ways to create transfers: glues and mediums, heat, solvents, and assorted methods from stenciling to rusting. When you can use all the different methods, you can choose which method will best meet your needs. It is like having a brand new toolbox filled with everything you want. You might use a single technique or combine several to get your desired results. Knowle dge is your best asset: Understanding why some things work or don’t work can lead you to break the rules and make new discoveries. Our greatest hope is that you explore and accept all those possibilities—including the happy acciden ts. We encourage you to play, create and let us know what you discover. Visit us at imagetransferworkshop.com.

7

Z2509 pgs 001-009.indd 7

4/15/09 7:12:04 PM

how this book is set up Each technique has its own special qualities. We’d like to show you how the book is set up so you’ll know what to look for where, when and why. PROJECT INTRODUCTION : WHAT IS THIS TECHNIQUE ALL ABOUT?

This brief introduction explains the technique and the type of image it may produce. Be sure to check here to find out what kind of printer or copier works best with the transfer technique, as the wrong type may result in a poor transfer or no transfer at all. LIMITATIONS : WHAT ARE POTENTIAL ISSUES WITH THIS TECHNIQUE?

TROUBLESHOOTING WHATHAPPENED TOYOURTRANSFER? WE’LLTELLYOU! One of the best features of this book is the troubleshooting sections. In these sections, you’ll find tips and tricks to save transfersgone-wrong. In the event you’ll have to start a transfer over, we’ll tell you what to look out for next time to achieve great transfers!

Transfers can cast a whole range of finished images, from limited sizes to dreamy lines. Look here to see if the technique will reproduce the image to your liking. SURFACE OPTIONS : WHAT SURFACE WILL THE TECHNIQUE WORK ON?

Surfaces can be as sturdy as rock or as delicate as rice paper. Check here for recommendations on what surfaces the technique will work best. Transfer surfaces may include canvas, Plexiglas, smooth metal, plastic wrap, tin foil, and papers, including gampi/silk tissue, printmaking and watercolor papers, and rice paper. ARCHIVAL QUALITY : WILL THIS TRANSFER STAND THE TEST OF TIME?

Most artists want to know: Will this image last? Does the image transfer fade easily, or will it deteriorate over a longer period of time? Exposure to UV light, moisture and acidity of papers, or pH, will affect pigments over time. Some pigments are more lightfast than others meaning they won’t fade from print. The archival quality of each transfer is broken down into three categories: Low archival quality. Images are more prone to fading over time. This happens in ink-jet prints that are not printed on adequately primed surfaces and are not protected by a varnish or proper framing. This is not a scientific estimate, but images with a low archival rating may fade within a few years without protection. You can always enhance the archival durability with preservative sprays and varnishes.

Medium archival quality. Uses more lightfast inks, proper preparation with sprays and care in mounting and/or framing. Most magazine images and toner color copies fall into this category. You should have no problems for decades. High archival quality. Uses lightfast paints and carbon or black toner prints. These should last seventy-five years or more. Using Krylon Preserve It! on ink-jet prints, magazines and found papers increases the lightfastness, and Krylon Make It Acid-Free! helps preserve papers by neutralizing the pH. If you are making a card or page in a book that will not be exposed to UV light, don’t worry about the archival quality, but if you are using any of these techniques for finished art for sale, use the preservatives and a UV-resistant varnish. We like Golden Archival Spray Varnish; it comes in matte, satin or gloss sheens. Several coats are best.

8

Z2509 pgs 001-009.indd 8

4/15/09 7:12:29 PM

NOTES : WHAT OTHER INFORMATION SHOULD I CONSIDER?

Here you’ll find important information that will help you as you complete each technique. Useful notes may include information on timing, reminders to flip images (especially if they have words and numbers) and other tips for completing a successful transfer. MATERIALS: WHAT DO I NEED TO COMPLETE THIS TRANSFER TECHNIQUE?

Materials and tools for image transfer techniques are as varied as the techniques themselves. From the uncommon uses for household items to the mundane art items rehashed. Be sure to read the materials list carefully, and gather all the materials before you begin each technique.

common tools and materials While the techniques in this book use a variety of materials to make fabulous image transfers, we make good use of some basic tools and materials in most of the processes. If you have the following items, you’re in a good place to start: Materials: soft gel (gloss) polymer medium (gloss) workable fixative UV-resistant varnish or spray

a note about printers and copiers When working with image transfers, it is important to know which type of printed image you can use for the various techniques. To know this, you must know what kind of printers you will have access to—either an ink-jet printer or copier or a laser printer or copier. Throughout the book, we’ll let you know which printer or copier will work for the techniques; in some techniques, only one will work; for other techniques, both may work. Images produced by ink-jet copiers and printers are water soluble. You must spray ink-jet images with a workable fixative if you don’t want them to smear. Laser images are created with heat and dry toner. You can put water on them, and they will not smear. When working with printers and copiers, you will find that they are all different. If you are trying a technique and it is not working, try a different machine. Don’t make a lot of copies until you find a machine that works for you. Sometimes, increasing the toner level or using a color copier, even to print black-and-white images, will help the transfer.

Tools: lots of copy paper brayer, bone folder or large spoon spray bottle with water paintbrush palette knife fine grit sandpaper scissors paper towels iron

9

Z2509 pgs 001-009.indd 9

4/15/09 7:12:39 PM

Z2509 pgs 010-019.indd 10

4/15/09 5:46:52 PM

glue s an d me di um s Glues, tapes and mediums are used to in image transfers to hold the ink from copies or magazines while allowing the paper to be eliminated. This is a simple method to build history into your project; it can create transparent or opaque layers that can be used in many different mediums from painting to journal pages. Some of these techniques are prized for their clarity and ease of use, such as Clear Contact Paper or Clear Packing Tape (page 12), while others can be used to create architectural features, like Gel Skin (page 20). We use Dry Gel, Gesso and Caulk (page 17) and Paint (page 24) transfers the most—Sandra finds gesso transfers to be a great way to begin a project. We love to sand, scrape and burn edges and surfaces to create more drama and mystery. Transparency With Gel (page 26) transfers are fun, fast and great in journals. Remember that the ink-jet copies release with water, and the toner-based images need to be dried. Many of the mediums used in this section are also used to bond other transfer techniques to backgrounds. We commonly use soft gel (gloss) and liquid polymer medium to adhere images. Consider buying some containers of each to have on hand. We use gloss gels and mediums because, when dry, they are the most clear. Matte or satin mediums may be used, but realize that the imagery will be diffused. Be sure to check materials lists to get the right adhesive for each transfer throughout the book.

11

Z2509 pgs 010-019.indd 11

4/15/09 5:47:25 PM

These are two of the easiest transfer

clear contact paper or clear packing tape

techniques, and they use products we often have available at home. You can use either toner-based or magazine images (with the exception of magazine images that are coated with either a varnish or plastic coating). Packing tape is thinner and more transparent than the contact paper, but it has restricted width. After applying the packing tape or contact paper to the image face, the trick is to burnish the image well so the ink sticks to the adhesive. You can actually see this happen.

LIMITATIONS

Clear packing tape is limited to the width of the tape, though you can add rows of additional tape to make it wider. Clear contact paper can leave a slightly fuzzy image. Both leave an edge on the finished piece, but this can be minimized with additional layers and finish. SURFACE OPTIONS

This transfer technique works on any surface. ARCHIVAL QUALITY

magictime | Clear packing tape transfer, stamps and Lazertran transfer. ARTWORK BY DARLENE OLIVIA M C ELROY

Materials  toner-based or magazine image  clear contact paper or clear packing tape  background surface  bone folder or large spoon  sandpaper  spray bottle of water  soft cloth (optional)  soft gel (gloss) or polymer medium (gloss)  paintbrush  scissors

12

Z2509 pgs 010-019.indd 12

For clear packing tape, the quality is low to medium. Coat images with UV-resistant spray before putting the tape on the image to help the quality. With clear contact paper, carbon blackand-white copies are lightfast. Magazine images and color copies can be sprayed with a UV-resistant spray prior to transferring to improve lightfastness. NOTES

For a distressed look, sand the image transferred to the contact paper or packing tape. Don’t dump paper rubbings into the sink. Different brands of contact paper work differently, some better than others. Don’t use contact paper that can be repositioned. Try out a few brands that are meant to be permanent.

4/15/09 5:48:40 PM

2 / Burnish image Using a bone folder or a large spoon, burnish the image thoroughly. You want the ink from the image to transfer completely to the contact paper or packing tape.

3 / Sand image 1 / Prepare image

backing

Select the image to be transferred. IF USING CONTACT PAPER: Use scissors to cut the contact paper to the size needed. Peel off the backing and put sticky side down on the face of the image. IF USING PACKING TAPE: Layer the packing tape to the size needed to cover the image.

Using the sandpaper, lightly rough up the back of the image to break up the paper backing.

4 / Moisten paper backing

5 / Remove paper

Using the spray bottle with water, moisten the paper backing.

Using your fingers or a soft cloth, rub off the wet paper, leaving the ink on the contact paper.

Z2509 pgs 010-019.indd 13

13

4/15/09 5:51:12 PM

6 / Apply medium to surface

7 / Apply image to surface

Using a paintbrush, apply polymer medium or soft gel onto the background surface.

Lay the contact paper or packing tape image sticky-side down. Using a paintbrush, smooth out the image to the surface with polymer medium or soft gel.

GHOST IMAGES

TROUBLESHOOTING

If you don’t remove all of the paper, you’ll have

MISSING PIECES OF

THE IMAGE?

a ghost-like paper

If you’re missing pieces of the image after

paper backing dry,

removing the paper, there are two possible

then repeat steps

explanations: Either you didn’t burnish the

4 and 5.

residue. Let the

image enough, or you rubbed too hard while removing the paper backing. This result can actually add more texture and interest to your transfer, but if you’re looking for a near-perfect transfer follow this advice: Burnish hard and several times in step 2. Be gentle when removing the paper in step 5—take off one layer of paper,

14

Z2509 pgs 010-019.indd 14

OTHER TIPS Some copy machines and printers use less toner and may not work as well for this technique. If you’re having problems with the transfer, try a different printer, or try a print shop: Ask them to increase the toner or use a different type of paper. If you want to paint over areas of the transfer, roughen the surface slightly with fine sandpaper

then let it dry.

so the tape or contact paper can hold the paint.

Repeat steps 4

You could also paint a layer of clear gesso on top

and 5 until all the

and let it dry, with or without sanding it first.

paper is removed.

4/15/09 5:52:34 PM

This technique works with ink-jet images.

Direct Gel, Gesso and Caulk

With soft gel or clear caulk the background will show through. With gesso or white caulk the background will be white or whatever color you tint the medium. Timing and weather are big variables in this transfer. Because of changes in the season or climate, you will find that you might have to adjust your timing.

LIMITATIONS

This technique does not make a perfect transfer. SURFACE OPTIONS

You can do a direct transfer to about any surface that you can apply the mediums to, such as canvas, paper, wood, Plexiglas or sanded metal. ARCHIVAL QUALITY

Low quality but can be enhanced with a UV-resistant spray. NOTES

Remember that the background will show through the light areas of the image. The image will be reproduced backwards, but you can flip the image when making copies. Because of changing technology you might have problems with some printer paper, especially new glossy ones. Printing the image onto plain copy paper yields the best results.

songanddance| Direct gel transfers, collage and embellishments ARTWORK BY SANDRA DURAN WILSON

Materials  ink-jet image  background surface  soft gel (gloss), gesso or clear caulk  paintbrush  brayer  scissors

15

Z2509 pgs 010-019.indd 15

4/15/09 5:53:57 PM

2 / Apply medium to background Using a paintbrush, apply a medium layer of gesso, gel medium or clear caulk onto the background surface. If the layer is too thin, the medium will dry too fast; if it’s too thick, the medium will ooze out when burnishing.

3 / Apply image 1 / Select image Choose a color or black-and-white image from an ink-jet printer. Using the scissors, cut out the desired image. You may leave a border around the image for easy handling.

Immediately lay the image ink-side down onto the gesso/ gel/caulk.

TROUBLESHOOTING 4 / Burnish image Using the brayer, rub down the image for approximately 30 seconds to 1 minute. Start with a light touch, and check to see how it is transferring. Apply more pressure if needed.

MISSING PARTS

OF THE IMAGE? If you leave the paper on too long, it will stick to the medium. If that happens, you might be able to peel off a layer of the paper. Then you have a transfer with a thin layer of paper on top. You can let this dry, then put a layer of polymer medium gloss on top to make it more transparent. These transfers are trickier now because new technology makes the printing inks stick to the paper better.

5 / Check transfer Hold the edge of the paper and peel back a corner to reveal the image transfer. Burnish for an additional 30 seconds if necessary.

16

Z2509 pgs 010-019.indd 16

4/15/09 5:54:52 PM

The important thing to remember with

Dry Gel, Gesso and Caulk

this technique is whether you want the toner-based or magazine transfer to be opaque or transparent. Gel or clear caulk creates a transparent transfer and you will be able to see what is underneath it in the lighter areas of the transfer. With gesso or white caulk, which you can tint, you will not be able to see anything underneath because the mediums are opaque.

LIMITATIONS

It’s important for the image to be burnished down well and for the medium to be thoroughly dry before removing the paper backing. This technique doesn’t work on magazine images that have a varnish or plastic coating, such as those found on the front and back cover. SURFACE OPTIONS

This transfer technique works on most surfaces. ARCHIVAL QUALITY

Medium to high; UV-resistant spray adds to the archival quality. NOTES

thebeginning| Dry gesso transfer, dry gel transfer on molding paste background

ARTWORK BY SANDRA DURAN WILSON

Your chosen image will be reproduced backwards. You can flip it back with computer editing software or a printer. High-contrast images work well. Don’t dump paper rubbings down the sink drain. For a wrinkled effect, pat down the image lightly, and don’t burnish.

Materials  toner-based or magazine image  background of choice  gesso, soft gel (gloss) or caulk  paintbrush  brayer sandpaper  spray bottle of water  soft cloth  scissors

17

Z2509 pgs 010-019.indd 17

4/15/09 5:57:11 PM

1 / Prepare background

2 / Apply image to surface

Choose a toner-based or magazine image. Using the scissors, cut the image to the desired shape and size. Using the paintbrush, apply gesso, gel or caulk to the background surface.

Lay the paper image-side down onto the prepared surface.

3 / Smooth image

4 / Sand image backing

Using your hands, smooth the image down on to the background. If desired, you can use a brayer.

Let the image thoroughly dry, which could take as long as 24 hours. Using the sandpaper, lightly rough up the back of the image.

18

Z2509 pgs 010-019.indd 18

4/15/09 5:58:34 PM

5 / moisten image backing

6 / Rub off paper

Using the spray bottle with water, moisten the back of the image.

Using the soft cloth, gently rub off a layer of paper. Let the image dry. Repeat steps 5 and 6 to rub off any additional paper layers.

TROUBLESHOOTING

MISTAKES CAN BE MAGIC Though you will usually want most of the paper backing to be removed, sometimes leaving some

WHY WON’T THE IMAGE STAY?

If there is not enough gesso/gel/caulk or if

on can have a wonderful effect. If the image wasn’t rubbed down well when

the medium has dried in spots, the image

using magazine images, you will get ripples in

will not transfer. Make sure you have enough

your image. When the paper is rubbed off, you will

medium, and lay the image ink-side down

get an abstract appearance.

immediately after applying it.

If this happy mistake doesn’t suit your taste, here are two tips to get the wrinkles out: Use the spray bottle to mist the image before placing it facedown onto the surface. If wetting the image is too messy for you, simply try burnishing harder.

test Soft gel (with dry magazine just patted on) and fabric crayon transfers

ARTWORK BY DARLENE OLIVIA M C ELROY AND SANDRA DURAN WILSON

19

Z2509 pgs 010-019.indd 19

4/15/09 5:59:39 PM

Gel Skin Gel skins can be made using tonerbased or magazine images. As we show with this art piece, you can use a black-and-white image, then paint the back of the gel skin to add color and texture to your finished artwork. Try embedding flexible materials in the gel skin before it dries, then you can shape the skin once it has dried completely.

LIMITATIONS

The skin has an edge when pasted down that can be minimized with additional gels and mediums; or, if you prefer, you can play up the edge in the artwork. SURFACE OPTIONS

The skin can be adhered to almost any surface in addition to being rolled or worked into a sculptural shape. ARCHIVAL QUALITY

High archival quality if you use a toner-based image, especially a black image.

cou ntin g stone s | Gel skin, collage and gum bichro

NOTES

on handmade paper ARTWORK BY SAND RA DURA N WILSO N

Remember that the background shows through light areas of the image, which will become transparent. Using soft gel (gloss) will keep your images clear even with two to three layers. You can alter the finish by applying a satin or matte varnish as your final coat. If copying the image, it will be reproduced backwards. The image can be flipped using the setting on the copy machine. Don’t dump paper rubbings down the sink drain.

mate print

Materials  toner-based or magazine image  scissors  background surface  soft gel (gloss)  paintbrush  sandpaper  spray bottle with water

20

Z2509 pgs 020-029.indd 20

4/15/09 6:01:21 PM

2 / Sand backing Let the final layer of soft gel dry thoroughly, which could take overnight or longer. Using the sandpaper, gently roughen the back of the image.

3 / Moisten Image 1 / Prepare image Choose a toner-based or magazine image. Using scissors, cut the image to the desired size. Using the paintbrush, apply the soft gel to the image. Let the layer dry. Add 2–3 more layers of the soft gel, allowing each layer to dry thoroughly (the gel will become clear when it is completely dry).

backing Using a spray bottle with water, moisten the back of the image.

TROUBLESHOOTING

WHAT CAN I DO TO GET ALL OF THE PAPER OFF? If there is too much paper on the back, let it dry completely, and repeat steps 3 and 4 until all of the paper is removed. You can also use some clear polymer

4 / Rub off backing Using your fingers, rub off the paper backing.

medium to make the paper backing more transparent. If too much paper is left on, this will not work well.

MY IMAGE IS WRINKLED

21

To eliminate wrinkles, wet the paper before you place it facedown on the surface.

Z2509 pgs 020-029.indd 21

4/15/09 6:02:46 PM

Grounds are coatings that allow you to

Digital Ground

directly transfer images onto difficult surfaces such as tin foil, paint, gel skin, wood veneer, plastic and other hardto-transfer-to surfaces using an ink-jet printer. It comes in clear and white. Remember the white covers up anything that is underneath it.

LIMITATIONS

The size of the printer feed and the type of printer feed will affect this technique. It does not work well with a c-curve feed; it works best with a direct feed. The printer can leave “pizza wheel” marks on some substrates. SURFACE OPTIONS

Works on foil, paint and gel skin, wood veneer, plastic, metallic paper, absorbent ground and painted or collaged surfaces using an ink-jet printer. Be sure to use the appropriate Digital Ground for your chosen surface. ARCHIVAL QUALITY

Medium archival quality, but a UV-resistant gel or spray will improve the archival quality. NOTES

If you want to use this technique with tin foil or gel skins (see page 20), place the foil or gel skin to a sheet of copy paper. Using the cellophane tape, secure the edge that will go through the feeder first and tape 2" (5cm) on the sides.

the gift | Painted and stamped canvas and Golden Digital Ground for Non-Porus Surfaces

ARTWORK BY DARLENE OLIVIA M C ELROY

Materials  ink-jet printer  background surface  Golden Digital Ground  paintbrush  workable fixative

tip If you can’t find Golden Digital Ground, you can also use inkAID for this technique.

22

Z2509 pgs 020-029.indd 22

4/15/09 6:04:06 PM

1 / Apply digital ground

2 / Print image

Using the paintbrush, apply the Golden Digital Ground to the background surface. Often one coat is sufficient. If a second coat is necessary, let the first coat dry before applying the second.

Allow the Digital Ground to dry thoroughly. Using an ink-jet printer, print the image onto the background surface. Spray it with the workable fixative. Let the image dry thoroughly. Embellish the image as desired.

TROUBLESHOOTING

I JUST MADE A MESS WHAT HAPPENED? If your image smears, there are two possible culprits: Either you didn’t add the Digital Ground or you used a toner-based printer. To fix this, wipe off the ink and repeat steps 1 and 2. Also, make sure you are using an ink-jet printer. A laser printer will only yield the same muddy results.

WHAT ARE THESE SQUIGGLY LINES WHEN I USE TIN FOIL? If you’re using tin foil, you may get “pizza wheel” imprints from your printer. You can take these wheels out, but your warranty is usually rendered invalid if you do. In general, you should use the manual feed to make sure your transfer surface goes through the printer properly.

tip If you’re looking for a better archival quality, use a palette knife to apply a thin layer of Golden Gel Topcoat with UVLS. Let it dry thoroughly before embellishing.

Z2509 pgs 020-029.indd 23

23

4/15/09 6:05:25 PM

paint

The difference between a paint transfer and gel/gesso/caulk transfer is that the paint has less body so it requires painting both the image face and the background before laying the image facedown on the background. Kind of like a paint sandwich.

LIMITATIONS

Lighter colors work better than dark because the lighter colors in an image are more transparent. With a dark paint you will lose a lot of the image. SURFACE OPTIONS

Works well on canvas, panel and Plexiglas. ARCHIVAL QUALITY

sum mer aft ern oon | Paint transfer, stamping and

High archival quality, but we always recommend a UV-resistant finish.

ARTWORK BY DARL ENE OLIVI A M C ELROY

NOTES

Image will be reproduced backwards , but it can be flipped when making copies. Because you must wet the back of the image to remove the paper back, this does not work well on most paper backgrounds with the exception of watercolor or printmaking papers. Don’t dump paper rubbings down the sink drain.

paint

Materials  toner-based or magazine image  background surface  acrylic paint  paintbrush  brayer  sandpaper  spray bottle with water

tip

24

Z2509 pgs 020-029.indd 24

This is a great technique for covering up areas of a project that aren’t working. Paint over the area, and apply the transfer. The paint will cover up the background.

4/15/09 6:06:15 PM

2 / Brayer image Immediately place the image facedown onto the background surface. Using the brayer, smooth the paper onto the surface.

1 / Paint image and background Using a paintbrush and an acrylic paint of your choice, paint both the background surface and the face of the image.

3 / Sand image backing Allow the image to dry thoroughly, which usually takes several hours. Using the sandpaper, lightly rough up the back of the image.

TROUBLESHOOTING MY IMAGE DIDN’T TRANSFER WHAT HAPPENED? If the paint is too thin or has dried before sticking the picture and background together, the ink won’t transfer. We recommend being generous with your

4 / Moisten image backing Using the spray bottle with water, moisten the back of the paper.

paint and placing the image on the background while the paint is wet.

THERE IS STILL A LOT OF PAPER ON MY PICTURE Some paper may remain, giving a distressed look. You can repeat steps 4 and 5 to remove more paper, or you can apply a gloss medium to reduce the white haze of paper residue. This only works with minimal residue.

5 / Remove paper Using your finger, rub off the paper to reveal the image. The paper will come off in layers. Repeat steps 4 and 5 to remove as much paper as possible.

25

Z2509 pgs 020-029.indd 25

4/15/09 6:07:34 PM

This ink-jet transfer technique gives

Transparency with Gel

you an abstracted image. Some areas may be very clear and others begin to move and shift. If you are looking for a great way to start a painting or create a layer—and you are open to surprises—then this is a technique for you.

LIMITATIONS

You are limited to the size of the transparency film and your printer, but you can “tile” the image to make a larger image. SURFACE OPTIONS

This technique works on water-based paintings, paper, wood, properly prepared metal and Plexiglas. ARCHIVAL QUALITY

An ink-jet image’s quality is low, but you can always increase the archival quality with the application of a UV protective varnish. NOTES

flower wheel | Gel transfer from ink-jet transparency, paint and texture mediums

ARTWORK BY SANDRA DURAN WILSON

Materials  ink-jet printer  multipurpose transparency film (for all printers)  background surface of choice  soft gel (gloss)  paintbrush  brayer

The success of this transfer depends on the proper thickness of the soft gel in relation to the absorbency of your background. If you are putting this onto paper (high absorbency), you will need a medium layer of soft gel. If you are transferring onto Plexiglas (non-absorbent), you should use a thin layer. Temperature and humidity can also be factors. If the temperature is cold or the humidity is high, it takes longer for the mediums to dry so you have a longer working time as opposed to high heat and low humidity where you will need to work quickly. Also, if you are working on an absorbent surface, you will have to be quick, and if you are working on a nonporous surface, you will have more time. You will get a feel for it after some experiments.

26

Z2509 pgs 020-029.indd 26

4/15/09 6:08:50 PM

1 / Prepare image and background

2 / Place image onto background

Select an image. Using the ink-jet printer set to transparency, print the image onto the transparency. Using the paintbrush, apply a medium coat of soft gel to the background surface.

Place the transparency ink-side down onto the background. Be careful not to move the image.

tip Have you misplaced your brayer? Use your hand! Just make sure to apply an even pressure and cover all spots of the image.

TROUBLESHOOTING

3 / Brayer image Using the brayer, lightly smooth down the transparency to transfer the ink. Begin with a very light touch— especially if you have a thicker layer of soft gel. With your hand holding the transparency in place, lift a corner to check the transfer. If needed, place back the image down and apply more pressure with the brayer.

MY IMAGE WON’T TRANSFER If not enough of the image is transferring, you may apply more pressure or mist the background with water. Remember to work quickly so your gel doesn’t dry out.

27

Z2509 pgs 020-029.indd 27

4/15/09 6:10:07 PM

If you use multipurpose transparency film

Transparency Glued On

(for copiers, laser and ink-jet printers), you have more flexibility for all kinds of uses. This film is very clear and easily available. This technique can be done with either toner-based transparency or ink-jet. If using ink-jet you must spray it with a workable fixative prior to gluing it down.

LIMITATIONS

There is a visible edge, but it can be minimized with additional layers and finishes. You’re also limited to the standard size for transparencies: 8.5" × 11" (22cm × 28cm). If using an acrylic medium, it takes a long time to dry and become clear. SURFACE OPTIONS

Works well on canvas, panel, wood, paper and Plexiglas. ARCHIVAL QUALITY

A toner-based image has a better quality than an ink-jet image, but UV-resistant gel or spray can help the quality. NOTES

It is best to adhere the image printedside down, so if you are printing text or music, you will need to print it using a mirror image or reverse. Bold graphics work best, but experiment with all images.

waiting by the window | Transparency, blender pen transfers on painted and stamped background

ARTWORK BY DARLENE OLIVIA M C ELROY

Materials  toner-based or ink-jet printer  transparency (dual use for both toner and ink-jet)  scissors  soft gel (gloss) or acrylic medium  paintbrush or palette knife  background surface  brayer  paper towel  workable fixative for ink-jet transparencies

tip You can get away from the super shiny finish of the transparency by putting a little clear gesso diluted with water over the surface and wiping off the excess. The gesso-water mixture can be anywhere from 20 percent water to half water, half gesso.

28

Z2509 pgs 020-029.indd 28

4/15/09 6:10:45 PM

2 / Cut out image Using the scissors, trim the image to the desired size.

1 / Prepare image Select an image. Using the printer, print it onto the rough side of the transparency. If using an ink-jet printer, let the printed transparency dry for about a half hour, then spray it with a workable fixative. If using a toner-based image, no workable fixative is necessary.

3 / Apply medium Determine the image placement on the background. Using the paintbrush or palette knife, apply soft gel or acrylic medium to the background.

TROUBLESHOOTING THE IMAGE SMEARED WHAT HAPPENED?

4 / Lay image on

If the image smears when you brayer it

Lay the image printed-side down onto the background.

to the surface, you probably forgot to use

background

the spray fixative to set the image. Pull the transparency up and wipe away the gel so you can salvage the background. Then start over, making sure to use the spray fixative on the ink-jet image. If it still smears, consider using a toner-based transparency.

WHY ARE THERE AIR BUBBLES UNDER THE IMAGE? This means there was not enough soft gel or medium used, and the image was not sufficiently smoothed out. If the background surface is textured at all, use a soft gel to fill in an uneven surface; use a polymer medium if the surface is smooth.

5 / Brayer image Place the paper towel over the image. Using a brayer or your hand, smooth out the image to push out any air bubbles and adhere the image to the background. Let it dry flat. The acrylic is dry when it becomes clear; this may take several days.

29

Z2509 pgs 020-029.indd 29

4/15/09 6:11:39 PM

Z2509 pgs 030-041.indd 30

4/15/09 12:54:38 PM

he at Heat is used to transfer the imagery by baking it into a product, melting it, printing it or fusing it. Some products are made specifically for this purpose, like iron-on transfers, and others are unique, like using heat to fuse toner to plastic. This section gives you ways to use transfers in jewelry, sculpting and sewing. Most of these methods use products in alternative ways or update older techniq ues. As we wrote this section, we kept asking ourselves what else could you stick a transfer onto. This is how we came up with the Plastic Heat technique (page 45). The Fabric Crayons (page 34) is fun to do with kids, and the Liquid Polymer Skin (page 43) and the Polymer Clay (page 48) techniques are great for jewelry and sculpture. Fusible Web (page 32) and Iron-On Sheets (page 41) are wonderful textile projects. We also had some funny bloopers, like when we were experimenting with the fabric crayons, and we kept ironing and nothing was happening—only to discove r the iron wasn’t plugged in. The instructions for these techniques are clear and easy to follow, but when working with hot surfaces, be sure to take the necessary precautions. Always use oven mitts when performing baking techniques, and never touch the hot surface of an iron or a heat tool. Follow the directions carefully, and allow all the transfer items to cool properly before handling them.

31

Z2509 pgs 030-041.indd 31

4/15/09 12:54:49 PM

Fusible Web

Similar in texture to organza, this material will give you a soft diffused look. What’s great is you don’t need an adhesive, you just iron the transfer on to your background. When heating the material, it can develop holes giving it a distressed look, which has texture potential. You can even try painting with watercolors on the fusible web.

LIMITATIONS

Soft fuzzy image, but you can increase the saturation of your image in your computer. SURFACE OPTIONS

You can adhere it to fabric, aluminum foil, paper, wood or lightly painted, porous, acrylic surfaces. You may need to glue the fusible web to surfaces you can’t iron on or ones that are too textured.

the gar den gat e| Fusible web, acrylic paint and non-po

rous digital

ground on aluminum foil. ARTWORK BY SAND RA DURA N WILSO N

Materials  ink-jet printer  fusible web  copy paper  background surface  tape  iron towels or ironing board 

ARCHIVAL QUALITY

silicon sheet (optional)  scissors  workable fixative

Low to medium; UV-resistant spray or varnish finish will help with lightfastness. NOTES

Let it dry completely at the end of step 2 to prevent smearing. Make sure all of the fusible web’s edges are adhered to the paper prior to printing; otherwise you could jam the printer.

32

Z2509 pgs 030-041.indd 32

Because the fusible web is heat-sensitive, you cannot iron this product onto freezer paper. Don’t use a brand new printer; use an everyday, workhorse printer. Follow steps 1 and 2 carefully to prevent paper jams in your printer. Don’t forget: The silicone sheet or backing paper helps prevent accidental fusing of fabrics or materials to your iron.

4/15/09 12:55:06 PM

1 / Prepare fusible web

2 / Print image

Using the scissors, trim the fusible webbing (attached to its backing paper) slightly smaller than the copy paper. Remove the fusible web from its backing. Set the fusible backing aside to use later.

Using the tape, secure the fusible web to the copy paper. Make sure the part that will feed through the printer is securely taped down. Run the fusible web through the ink-jet printer, making sure that the edges are taped and the webbing lies flat. Spray the printed image with the workable fixative. Let the image dry for a half hour.

TROUBLESHOOTING

3 / Adhere image to background Using the scissors, cut out the desired fusible web image. Place the background surface on a towel or on the ironing board. Place the image onto the background surface. Place the fusible web backing over the image. If using the silicon sheet, place it on the surface of the art work. Place the thin towel over all the layers. Using the iron on a medium setting (no steam), adhere the image to the background by ironing over the towel.

WHY DID THE IMAGE SMEAR? If the image is blurred, you did not spray it with a workable fixative. Be sure to spray it and let it dry before painting or sealing.

I LEFT THE BACKING ON WHAT NOW? If you leave the fusible paper backing on and run it through your printer, it tends

33

to get wrinkled. If you like the look this provides, use it! If not, start with step 1 and be sure to remove the backing.

Z2509 pgs 030-041.indd 33

4/15/09 12:55:51 PM

Fabric Crayons

This is a fun and easy technique. You can build up textures and layers of fun drawings. It is also a great way to create a resist on a waterbased painting.

LIMITATIONS

You are limited to the colors from the box, but you can mix and blend. SURFACE OPTIONS

This technique can work on fabric, water-based paintings, paper and wood. ARCHIVAL QUALITY

Low, but may be improved using Krylon Preserve It! and a UV-resistant varnish. NOTES

You can build up interesting patterns using different rubbing or textural surfaces with different colors. You can also use a candle or regular crayon on the copy paper over texture and impart this to your painting as a resist.

spheresoflight | Fabric crayon transfer, light molding paste, collage and ExtravOrganza

ARTWORK BY SANDRA DURAN WILSON

Materials  Crayola Fabric Crayons  textured plates or surfaces  background surface  copy paper  iron  thin towels or paper towels  silicone paper  scissors  paintbrush  glue

34

Z2509 pgs 030-041.indd 34

4/15/09 12:56:08 PM

1 / Rub image onto paper

2 / Iron image

Place a piece of copy paper over a textured plate or textured surface. Using a fabric crayon, rub over the surface. You can also blend another color on top.

If desired, prepare additional rubbings, and use the scissors to cut them to desired sizes. Set the background surface on the towel. Place the rubbings crayon-side down onto the background, then place the silicone paper over the rubbing paper. Place a thin towel over the silicone paper. Using an iron on a medium setting (no steam), iron the transfer using gentle but firm pressure. Pull back a corner to see if the transfer is working.

TROUBLESHOOTING I WAS USING A PAINTED BACKGROUND AND NOTHING SHOWED UP WHAT HAPPENED? We discovered that when trying this technique over an acrylic painting that the crayon didn’t transfer as well. We then tried a wash—acrylic paint mixed with water—painted over the surface, and it acted as a resist. When we tried ironing

3 / Adhere image to background You may continue to iron other patterns onto the background until you have the desired results. When you are finished ironing, peel the image paper off the background. If desired, you can use the scissors to cut the image paper into shapes. Using a paintbrush, adhere the shapes to the background with a medium or glue of your choice.

the pattern again, it did show up.

I WAS USING A PAINTED BACKGROUND AND IT MELTED WHAT HAPPENED? The heat from the iron can melt the paint if there is a thick layer. Try using a background that has a thinner layer

35

of paint.

Z2509 pgs 030-041.indd 35

4/15/09 12:56:44 PM

Heat Tool

We used a small round heat tool purchased from a craft supplier for this technique, but an iron you have at home will work just fine.

LIMITATIONS

It is harder to transfer large images because you can only heat a small area at a time, so there is a greater chance of the toner copy moving and becoming blurry. This technique also doesn’t work well with textured surfaces. SURFACE OPTIONS

This technique works best on paper, glass, metal and wood. It will also work on Plexiglas, but it can warp the surface. It’s not recommended for paintings because it may melt the surface if the paint application is too thick. ARCHIVAL QUALITY

the fun zon e| Heat tool transfer, direct gel transfer, transfer and embellishments

blender pen

ARTWORK BY DARL ENE OLIVI A M C ELROY

The quality is high, but we always recommend a UV-resistant coating.

Materials  toner-based image  background surface  NOTES

This technique is great for text on Plexiglas. Remember when you use this technique that the image will be reversed unless you adjust the orientation when you make the copy.

heat transfer tool  tape

36

Z2509 pgs 030-041.indd 36

4/15/09 12:57:07 PM

1 / Place image on background

2 / Apply heat

Print a color or black-and-white toner-based image. Place the image toner-side down onto the background. Using the tape, secure the image to the background.

Using the heat tool, slowly make small circular motions on the paper.

TROUBLESHOOTING

THE PAPER GOT BURNED IS THAT OK? If you hold the heat transfer tool in one spot for too long, the paper will burn, making the image harder to transfer. Use

3 / Check transfer Lift a section of the image’s back to check the transfer. Repeat step 2 until the desired transfer is achieved.

a slow, steady pressure and small circular motions. You can come back to a spot that hasn’t transferred well.

I WAS WORKING ON A PAINTED SURFACE AND MADE A MESS WHAT HAPPENED? Your paint layer is too thick. If you’re going to transfer onto a painted back-

37

ground, make it a thin layer, and don’t heat in one place for too long. You can go back over the spot later if you need to.

Z2509 pgs 030-041.indd 37

4/15/09 12:57:37 PM

This is an inexpensive way to make

Homemade Ink-jet Fabric

your own cotton, canvas, organza or silk fabric transfers. You can get interesting combinations with different fabrics and patterns. You may use your fabric in many different ways, like quilting, stretching on stretcher bars, painting it and experimenting with other fabrics.

LIMITATIONS

This technique does not work well with synthetic fabrics. Size is limited to the size of your printer feed. SURFACE OPTIONS

You can sew fabrics or glue them on to most surfaces. ARCHIVAL QUALITY

Low to medium but can be enhanced with a UV-resistant spray. NOTES

springlove| Ink-jet fabric transfers, encaustic papers and collage. ARTWORK BY SANDRA DURAN WILSON

This technique does not work with toner-based copiers and printers. The image will be reproduced backwards, but it can be flipped or make a mirror image in your computer. Let it dry completely in step 2 to prevent smearing. Make sure all edges are stuck to the paper prior to printing, otherwise you may get a paper jam. Even when ironing in step 1, it may be best to tape the corners to prevent a paper jam. Don’t use your brand new printer; use your everyday workhorse printer. Use a regular paper setting not the photo setting.

Materials  ink-jet printer  natural fabric  background surface  copy paper  freezer or butcher paper  iron  towel  scissors  workable fixative  polymer medium or soft gel (gloss)  cellophane tape  paintbrush

38

Z2509 pgs 030-041.indd 38

4/15/09 12:57:55 PM

1 / Prepare fabric

2 / Print image to fabric

Using the scissors, trim the fabric and the butcher or freezer paper about 1/4" (6mm), smaller than the copy paper. Place the fabric on top of the glossy side of the butcher or freezer paper. Place the towel over the fabric. Using the iron on a medium setting (no steam), iron the layers using a steady pressure. Lift a corner of the towel, and check the fabricpaper adhesion.

Check the edge of the fabric and secure it with the cellophane tape if necessary. Select an image. Using the manual feed option on the ink-jet printer, print the image onto the fabric. If you accidentally print on the butcher paper, simply turn it over and reprint. Let the image dry for about 15 minutes. Peel the fabric from the butcher or freezer paper. Spray the image with the workable fixative.

3 / Cut image Allow the image to dry thoroughly. If desired, use scissors to cut out the image.

39

Z2509 pgs 030-041.indd 39

4/15/09 12:58:29 PM

4 / Apply medium to background

5 / Adhere image to background

Using the paintbrush, apply the polymer medium or soft gel onto the background surface.

Place the fabric on top of the background. Using the paintbrush, smooth the image down with the polymer medium or soft gel to adhere it to the background.

TROUBLESHOOTING WHO NEEDS TO IRON? YOU DO! Do yourself a favor and don’t skip the ironing. If you only tape the fabric down, it will most likely end up a crumpled mess in your printer. If you do jam your printer, gently extract the sheet and clean up any strings or paper pieces.

I WAS PAINTING OVER MY IMAGE AND IT SMEARED WHAT HAPPENED? If the image is blurred when painting over it in step 5, you most likely didn’t spray it with the workable fixative. Stop as soon as you see it is smearing. Let the medium dry, and spray it with the fixative again. Let it set for a half hour, and then try to affix it with acrylic medium or glue.

40

Z2509 pgs 030-041.indd 40

4/15/09 12:58:46 PM

Iron-On Sheets

We use ink-jet t-shirt iron-on transfer sheets that can be found at fabric and office supply stores. We find that brands vary.

LIMITATIONS

The transfer size is limited to the size of the printer feed. This technique doesn’t work well on acrylic painted surfaces. Using a heat transfer on an acrylic painted surface tends to make the surface mushy. SURFACE OPTIONS

This technique works well with fabric, papers, aluminum foil, lightly painted surfaces and wood veneers.

thr oug hth ewi ndow| Iron-on transfer, papers and

stamps

ARTWORK BY DARL ENE OLIVI A M C ELROY

ARCHIVAL QUALITY

Medium, but UV-resistant sprays will improve archival quality. NOTES

This is a fun technique to use with patterned fabrics, specialty papers and aluminum foil. This technique will work over watercolor paintings.

Materials  ink-jet printer  t-shirt iron-on transfer paper  background surface  iron  paper towel  scissors

41

Z2509 pgs 030-041.indd 41

4/15/09 12:59:02 PM

1 / Prepare image Using the ink-jet printer, print the selected image onto the iron-on transfer paper following the manufacturer’s directions. If desired, use the scissors to cut out the image.

2 / Place image on background Place the image printed-side down onto the background surface.

TROUBLESHOOTING 3 / Iron image Place a paper towel over the transfer sheet. Iron the image according to the manufacturer’s directions.

MYIMAGEDIDN’TTRANSFER VERYWELLCANIFIXIT? First, check the iron. Is it hot enough? If not, be sure it’s on the right setting and let it heat up more. If the heat setting is OK, place the transfer back very carefully, matching the holes as best you can, and iron some more.

OOPSIPRINTEDTHEIMAGE ONTHEWRONGSIDE!

4 / Check transfer Peel the backing to check the transfer. If needed, iron more. When you are satisfied with the transfer, peel the backing off while it is still hot.

That’s OK. If you have accidentally printed on the wrong side, send the transfer sheet through your printer again on the correct side.

42

Z2509 pgs 042-049.indd 42

4/15/09 6:12:26 PM

This technique works with toner-based

Liquid Polymer Skin

or magazine images. The flexibility of this skin is great for making dimensional shapes like beads or sculptural objects. We recommend having a toaster oven dedicated to baking liquid polymers and clays. Garage sales are a great place to find them. As some ovens run hotter, we recommend getting an oven thermometer to get an accurate temperature reading.

LIMITATIONS

The size of the craft or toaster oven and its heat distribution can limit this technique. If adhering the polymer skin to another object, there will be a visible edge. SURFACE OPTIONS

Use a glue to adhere the skin to canvas, panel and papers. You can also form the skin into beads and other dimensional shapes. ARCHIVAL QUALITY

Medium to high. NOTES

Some ovens have an uneven heating temperature. One area might be burned and another not baked enough. You might have to experiment with the ovens and the image’s placement on the rack.

feeling like royalty | Liquid polymer transfer, rhinestone crown and embellishments

ARTWORK BY DARLENE OLIVIA M C ELROY

Materials  toner-based or magazine image  background surface  liquid polymer  paintbrush  sandpaper  craft oven or toaster oven dedicated to craft projects  ceramic tile or baking sheet  spray bottle with water  soft gel (gloss) or polymer medium (gloss)

43

Z2509 pgs 042-049.indd 43

4/15/09 6:13:11 PM

1 / apply liquid polymer to image Choose a magazine or toner-based image. Using the paintbrush, apply the liquid polymer to the image.

TROUBLESHOOTING WHYDOESMYLIQUID POLYMERSKINHAVE BUBBLES? This happened to us, and it was a neat effect, but not what we wanted. It is possible your bottle of liquid polymer may be really old. Check the date on the

2 / Bake image Place the image onto a ceramic tile or baking sheet polymer-side up, and place the into the oven. Bake the image at 250–300ºF (121–149ºC) for approximately 15–30 minutes. Allow it to cool thoroughly. Using the sandpaper, lightly roughen up the back of the paper.

3 / Moisten image backing Using the spray bottle with water, moisten the paper backing.

bottle. The consistency of older liquid polymer is different from fresh. Another explanation: It may have been baked at too high a temperature or for too long. Next time check it every few minutes toward the end of the baking time.

THISPAPERISREALLY DIFFICULTTOTAKEOFF

4 / Rub off

Pat the image dry, then bake the liquid

Using your fingers, rub off the backing to reveal the image. Steps 3 and 4 may have to be repeated several times to remove all the paper backing. If adhering to a background, use polymer medium or soft gel as a glue.

polymer a little longer. Just don’t bake it too long, or you’ll get the bubbles mentioned above!

44

Z2509 pgs 042-049.indd 44

backing

4/15/09 6:14:07 PM

Plastic Heat

This transfer technique uses heat to fuse the toner-based image or magazine image to the plastic, making a very thin, skin-like image. It’s crisp, and you don’t need to reverse images for direction such as letters.

LIMITATIONS

This technique is harder to transfer to large areas. SURFACE OPTIONS

It glues to almost anything. ARCHIVAL QUALITY

Medium to high; UV-resistant gels and sprays add to its archival quality. NOTES

Choose a heavily inked color image— the plastic wrap will not stick to any white areas because there is no ink. If you adhere the transfer to a background surface, apply clear acrylic before laying it down to help it become more clear. Instead of an iron, you can use a heat gun, but it takes more care as it may burn holes in the plastic wrap. An iron also makes the image flatter. This transfer can be sewn easily.

han d me dow n | Dress made with muslin, stencils and plastic heat transfer ARTWORK BY DARL ENE OLIVI A M C ELROY

Materials  toner-based or magazine image  plastic wrap  iron  sandpaper  spray bottle with water  silicone paper  thin towels  scissors

tip If you’re using a heat gun, tape the plastic wrap to the image surface and use slow, steady heat. If you are heavy handed, the plastic wrap tends to get burn holes.

Z2509 pgs 042-049.indd 45

45

4/15/09 6:14:42 PM

1 / Prepare image Place the chosen image on the towel. Tear a piece of plastic wrap from the roll so it is larger than the picture. Using the scissors, trim off any excess plastic wrap. Using your hands, smooth the plastic wrap over the image.

TROUBLESHOOTING

2 / Layer silicone paper and towel Place the silicone paper over the plastic wrap. Make sure the plastic doesn’t go beyond the silicone sheet, or it may stick to the towel. Place the thin towel over the silicone paper.

3 / Iron image Using the iron on a mediumhigh heat setting (no steam), apply heat in a slow and steady manner to the towel.

WHYWON’TTHE PLASTICWRAPSTICK TOTHEPICTURE? Sometimes, it’s just a matter of patience; keep ironing! This process may take some time, and in our experience, edges can take the longest to stick. Another explanation is that there is too much white in the image. This technique works best with heavily inked

4 / Check transfer Periodically, peel back the top towel and silicone sheet to check for adherence.

images because the plastic wrap needs something to bond with—white space has nothing for it to stick to.

46

Z2509 pgs 042-049.indd 46

4/15/09 6:15:42 PM

5 / Sand backing

6 / Saturate image with water

When you are satisfied with the transfer, let the project cool (don’t forget to turn off the iron). Using the scissors, trim off any excess plastic. Using the sandpaper, lightly roughen up the back of the image.

Using the spray bottle with water, wet the back of the image with water. You could also place the image in a tray of water to saturate the paper.

TROUBLESHOOTING

IRUBBEDOFFPARTOFTHE IMAGE!WHATHAPPENED? Keep the following in mind for the next

7 / Remove paper backing Using your fingers or a soft cloth, rub the paper off the back. Spray with water as needed. You may have to repeat steps 6 and 7 to get all the paper residue off. Allow the picture to dry thoroughly before embellishing.

tip To keep the paper from curling while drying after step 7, place the transfer between paper towels and blot it. Smooth it out using your hands and let it dry between the paper towels.

Z2509 pgs 042-049.indd 47

time. Carefully check that the plastic and the image are bonded before sanding. If they are not, it will be easier to rub the image off. Also, don’t rub too hard in step 7. You can repeat that step several times to take off the layers of paper. If you press too hard while rubbing, you will likely take some of the image off. Of course, you may consider this a happy mistake. Perhaps the small hole adds a distressed element to your final

47

artwork. You can also sand the back of an image to give it a distressed look.

4/15/09 6:16:26 PM

Polymer Clay

This transfer works with magazine images and toner-based images. We recommend having a toaster oven dedicated for baking liquid polymers and clays. Garage sales are a great place to find them. As some ovens run hotter, we recommend getting an oven thermometer to get an accurate temperature reading.

LIMITATIONS

The color of the polymer clay will affect your image, as the lighter areas of the toner-based or magazine image will be transparent when the transfer is made. Any white areas of the image will be transparent, resulting in the color of the clay showing through. SURFACE OPTIONS

Polymer clay comes in many colors plus you can adjust the color of your image in your computer to make interesting combinations.

bala ncin g da nge r | Polymer clay transfer, blender and found objects

marker, stamps

ARTWORK BY DARL ENE OLIVI A M C ELROY

ARCHIVAL QUALITY

Medium. We recommend a UV-resistant varnish or spray on the completed piece to improve the archival quality.

Materials  toner-based or magazine image  polymer clay  craft oven or toaster oven  rolling pin or can

NOTES

In addition to creating elements to put in your art pieces or art books, this technique can be used for jewelry and sculpture.

48

Z2509 pgs 042-049.indd 48

4/15/09 6:17:04 PM

1 / Prepare image

2 / Bake image

Condition the polymer clay according to the package directions. Using the rolling pin or can, roll out the polymer clay to about ¼" (6mm) thick. A thicker clay may affect the baking time. Place the image facedown on the clay. Using your hands, smooth the image down.

In the craft oven, bake the clay for approximately 15–30 minutes at 250–300ºF (121–130ºC). When it’s finished baking, remove the clay and let it cool. Peel the paper off the clay to reveal the transfer.

TROUBLESHOOTING

THECLAYWASBAKEDTOOLONG DOESTHATMATTER? When the clay is baked too long, the paper will burn. The paper will most likely stick to the clay, so you’ll see more paper than the image. We recommend using a timer to remind you to remove the project.

WHYDIDN’TMYPICTURE TRANSFER? If you check the transfer and it looks like the above photo, you probably didn’t bake the clay long enough. Smooth the image back down

49

and bake a little longer.

Z2509 pgs 042-049.indd 49

4/15/09 6:17:52 PM

Z2509 pgs 050-061.indd 50

4/15/09 6:19:15 PM

so lven ts The techniques in this section use solvents, which are usually clear liquids that have characteristic odors. Solvents change the make-up of the original image, breaking it down and allowing the image to transfer. This section is by far the smelliest, but we’ve found that the wide range of transfer surface options make up for the odors. We chose these techniques because no specialized equipm ent is required. We did extensive experiments with some techniques to explore reasons why they wouldn’t work. If you want to transfer onto anything from rocks to Plexiglas, try the Lazertr an techniques using polymer medium (page 64) or turpentine (page 67). Crystal Clear is an easy way to transfer high-contrast images (page 55), while Wintergreen Oil (page 75) makes beautiful color transfers. Blender Marker (page 52) is one of our students’ favorite transfers and the Preserve It (page 70) is an inexpensive way to make your own rub-on transfers. The majority of these techniques include great troubleshooting sections, as solvent transfers can be some of the trickiest techniques to achieve. Since these techniques all have strong odors (except for Gum Arabic), be sure to use the solvents with care and in well-ventilated areas.

51

Z2509 pgs 050-061.indd 51

4/15/09 6:19:57 PM

Blender Marker Blender mar kers are a convenient method of storing and applying xylene. You can do this using the chemical and a brush, but the packaged mar kers are easier, less messy and emit less fumes. Make sure you get the xylene blender mar kers, as this technique will not work with alcohol mar kers. We recommend the Chartpak AD Mar ker Blender.

LIMITATIONS

You should probably stay away from this if you are chemically sensitive. Although it says it is non-toxic, use this in a well-ventilated area. Larger sizes are more difficult, and smellier, to transfer. SURFACE OPTIONS

This technique can work on paper, matte painted surfaces, metal, glass, Plexiglas, Sculpey/Fimo and rocks. ARCHIVAL QUALITY

Low to medium. These transfers can be maintained using a UV-resistant spray after the image has dried.

welcom eho me|  Rice paper, gampi tissue and embel

lishments transfers over fiber medium and painted backg round ARTWORK BY SAND RA DURA N WILSO N

Materials  toner-based or magazine image  blender marker   gampi paper or rice paper  background surface  acrylic medium (gloss) or soft gel (gloss)  burnisher  paintbrush  scissors  tape

NOTES

It is best to work in small areas and burnish rather than try to work on a large area all at once. Because a magazine is printed on both sides, it might be better to make a copy of the magazine image to avoid a mess. Images using this technique will be reproduced backwards, but you can flip the image when making copies to ensure words read in the correct direction.

Also, blender markers transfer colors in the reverse order of how they were printed, which makes yellows in the image the most difficult to reproduce.

52

Z2509 pgs 050-061.indd 52

4/15/09 6:21:05 PM

1 / Cut out image

2 / Apply blender marker

Select an image. Using the scissors, cut out the image, leaving a border.

Place the image toner-side down onto the gampi or rice paper (here we’ve used gampi paper). Using the tape, secure one side of the paper to the surface. Using the blender marker, go over small sections of the image.

3 / Burnish small sections Using the burnishing tool, such ass scissor handles, immediately burnish hard the small section where you just applied the blender marker.

tip When cutting out the image, be sure to leave a border; this will allow you to tape down the image and not hinder the transfer.

Z2509 pgs 050-061.indd 53

4 / Check transfer Lift the paper to check the transfer. Repeat steps 2 and 3 to cover the entire image. Keep the image taped to the background until you are happy with the transfer.

53

4/15/09 6:22:10 PM

5 / Apply adhesive to background

6 / Adhere image

Using the paintbrush, apply the polymer medium or soft gel onto the background surface.

Place the paper with the image onto the background surface, and apply the polymer medium or soft gel over the image to seal it.

TROUBLESHOOTING

WHY IS MY TRANSFER

SO LIGHT? If you decided to use the blender

I’M WORKING ON A

NON-POROUS SURFACE AND

MY TRANSFER IS MUDDY

WHAT HAPPENED?

marker on large

When using this technique on a smooth

image will transfer

surface, such as Plexiglas or metal, it can

too lightly or not at

be very easy for the image to smear. Why?

all. Stick to using

Because you don’t need to use as much

the blender marker in small sections and

xylene solution or to burnish as hard as

burnishing immediately to ensure a color-

you would on a rough or porous surface.

saturated transfer.

sections of the paper, the marker will dry and the

Use a lighter touch when burnishing

54

Z2509 pgs 050-061.indd 54

on smooth sur-

WILL THIS TECHNIQUE WORK ON

AN ACRYLIC BACKGROUND?

faces, and check

This technique can work on acrylics. Two things

the image transfer

you should remember when using this technique

often; you can

with acrylic backgrounds: You need to use a thin

always go back

coat of acrylics and a light touch when burnish-

over it if the

ing. If the acrylic layer is too thick, it can become

transfer is

gummy when being burnished, and the image will

too light.

be distorted or won’t transfer.

4/15/09 6:22:50 PM

Crystal Clear

This technique works with blackand-white and color toner-based images on a variety of surfaces. You must use a lighter touch with the burnishing when working on non-absorbent surfaces. Timing is critical in this technique, so be sure to follow the directions closely to ensure a good transfer.

LIMITATIONS

You should probably stay away from this if you are chemically sensitive.

the str oll | Crystal Clear transfer, blender marker transf images and embellishments.

er, stamped

ARTWORK BY DARL ENE OLIVI A M C ELROY

SURFACE OPTIONS

Paper, paint, metal, Plexiglas, glass and wood. ARCHIVAL QUALITY

Materials  toner-based image  background surface  Krylon Crystal Clear  bone folder or large spoon

High, but we always recommend finishing a piece with a UV-resistant gel or spray coating. NOTES

Work in a well ventilated area. For best results, use a high-contrast image.

55

Z2509 pgs 050-061.indd 55

4/15/09 6:23:26 PM

1 / Spray front of image

2 / Toner will rise on front

Choose an image. Spray the front of the toner-based image generously with the Crystal Clear.

The toner will rise on the front of the image. You may need to hold the paper at an angle to see the raised ink.

3 / Image will show through back

4 / Burnish image

The image will begin to show on the back of the paper.

While the paper is still wet, place the image toner-side down onto the background surface. Using the bone folder or a large spoon, rub the image onto the background surface.

56

Z2509 pgs 050-061.indd 56

4/15/09 6:24:21 PM

5 / Check transfer Peel the image back to check that it is transferring. You may have to spray it again and burnish if there are weak areas.

TROUBLESHOOTING

WHY IS MY IMAGE MUDDY? Here are the two most common reasons: The image in the transfer shown above doesn’t have a lot of contrast, which resulted in a poor transfer. To avoid this, always use a high-contrast image. You used too much Crystal Clear. Remember, you should be able to see the image from the back, but it shouldn’t be soaking wet!

WHY IS MY TRANSFER LIGHTER

IN SOME PLACES? Lighter areas, as seen below, can happen for two reasons. You did not use enough Crystal Clear. Refer to steps 2 and 3 to get the right amount. If you wait too long before burnishing the Crystal Clear will set the image, Once that happens, you’ll have to start the process over. Be quick to burnish the image after spraying it with Crystal Clear. Of course, this could add a little more tex-

57

ture to your finished art piece. But if you really want a solid transfer, burnish immediately.

Z2509 pgs 050-061.indd 57

4/15/09 6:24:57 PM

Gampi/Silk Tissue

This transfer, which works with both toner-based and ink-jet printers, is one of the most popular methods we teach. The silk tissue virtually disappears when you adhere it with a little diluted polymer gloss. This technique allows you to create collages without a paper edge. The trickiest part is getting it to print and not jam your printer. Carefully follow step 1 for so you have no problems.

LIMITATIONS

The size of the printer paper feed limits the size of the image. SURFACE OPTIONS

You can adhere this to most surfaces.

bud dha and the bur ning bus h| Ink-jet gampi

transfer, paint, encaustic printmaking and embellishments

ARCHIVAL QUALITY

The quality is higher with a toner-based copier than with an ink-jet printer. We recommend finishing with a UV-resistant spray to improve the archival quality of both types. NOTES

ARTWORK BY SAND RA DURA N WILSO N

Materials  gampi or silk tissue  scissors  tape  copy paper   printer  background surface  workable fixative (for ink-jet image only)   polymer medium (gloss) or soft gel (gloss)  paintbrush

Gampi tissue can be applied over heavy textures, which makes it more versatile than most transfers. Mix polymer with a dab of water for a clearer background (unprinted tissue will almost disappear).

58

Z2509 pgs 050-061.indd 58

4/15/09 6:25:31 PM

1 / Prepare Gampi or silk tissue

2 / Prepare image

Using the scissors, trim the gampi or the silk tissue ¼" (6mm) smaller than the copy paper. Using the tape, secure the gampi/silk tissue to the piece of copy paper.

Using the printer of your choice, print the image onto the tissue by using the printer’s manual paper feed. If using an image from an ink-jet printer, spray the image with the workable fixative after printing it. Allow it to dry thoroughly.

3 / Apply medium to surface Using the paintbrush, apply the polymer medium or the soft gel to the background.

4 / Apply image to background tip You can also iron the Gampi onto freezer paper that is cut to the size of a piece of copy paper.

Z2509 pgs 050-061.indd 59

Remove the gampi or silk tissue image from the copy paper. Remove the tape. Place the image onto the background surface. Using the paintbrush, brush the image with the polymer medium or soft gel to adhere the image to the background.

59

4/15/09 6:26:29 PM

Gum Arabic Gum arabic transfers are also known as paper plate lithography. It is a little more technical but worth the effort. You can create your own background papers or use photographs or other favorite imagery. Your black-and-white toner copy becomes your litho plate.

LIMITATIONS

This process can be done using a spoon or burnisher, but the process works best with a printing press. The size is limited by copier size.

thr oug hth ewi ndow| Gum arabic transfers, stamp

s and embel-

lishments

ARTWORK BY DARL ENE OLIVI A M C ELROY

SURFACE OPTIONS

Absorbent papers like rice papers, watercolor paper (smooth), canvas, natural fabric or print papers.

Materials  high-contrast, black-and-white toner-based image  background surface  gum arabic  piece of Plexiglas  palette or sheet of wax paper  oil paints (opaque paints work best)  linseed oil 

ARCHIVAL QUALITY

High. NOTES

scrap paper  palette knife  brayer  sponge  small container of water  printmaking or watercolor paper  pasta machine or large spoon  plastic bag  scissors  thin piece of soft foam (pasta machine only)

If using a watercolor or printmaking paper, you should mist them with water prior to transferring the image. Do not use recycled copy paper because it falls apart. The image will print in reverse, so if the image includes words or numbers, make the necessary adjustments when you print or make a copy. For a quick cleanup use baby oil to clean the tools and Plexiglas. Wash them thoroughly with soap and water, and let them dry completely. Toner-based images from a copier work better than those printed from a laser printer.

Z2509 pgs 050-061.indd 60

4/15/09 6:27:10 PM

1 / Prepare paper and image

2 / Mix paints

If you are using the pasta machine: Using the scissors, cut the paper you are transferring to and the black-and-white image to fit through the rollers. If you are using the spoon to burnish: You are only restricted by the size of the photocopy. Trim the paper to any size you like, or keep the sheet intact.

Using the spray bottle, mist the printmaking paper or watercolor paper with water and seal it inside the plastic bag to keep it damp. (Thin rice papers should not be misted. ) Using the palette (you can use a sheet of wax paper) and the palette knife, mix the oil paints with a drop or two of linseed oil until smooth. The paint should be buttery not sticky. Take some of the paint and put onto the palette. Roll the brayer back and forth through the paint until it is loaded with paint, then set it aside.

3 / Smooth image on Plexiglas Pour a small amount of the gum arabic on the Plexiglas. Using a damp sponge with a small amount of gum arabic on it, wipe down the area on the Plexiglas where you will lay the image. Place the image on that spot toner-side up. Using the damp sponge, smooth out any wrinkles. Pick up some gum arabic with the sponge and begin to work it into the image until it is gummy and saturated. Try to work in one direction.

61

Z2509 pgs 050-061.indd 61

4/15/09 6:28:14 PM

4 / Apply paint to image

5 / Wipe off ink

Using the loaded brayer, and starting from the center, apply a layer of paint to the image. Work only in one direction, not back and forth.

Using the damp sponge, mix some water and a small amount of gum arabic, and begin to gently wipe the paint off the paper. The paint will stay in the black areas and wipe off the light areas. Have the small container of water nearby so you can occasionally rinse the sponge.

6 / Lay image onto damp paper Take the damp printmaking or watercolor paper out of the bag. Lay the image facedown onto the paper.

7 / Run through pasta machine tip An alternative way to remove paint is to hold the painted copy over a tray and spray it with water until the paint is off the light areas.

If you are using the pasta machine: Fold the piece of scrap paper around the image and the paper. Set the pasta machine on its tightest setting. Using the thin piece of soft foam to add tension, run the papers through the pasta machine.

62

Z2509 pgs 062-071.indd 62

4/15/09 6:29:06 PM

8 / Burnish with spoon

9 / Remove paper

If you are burnishing by hand: Place the image and the paper onto the piece of scrap paper. Using the spoon, burnish the image onto the paper.

Pull the paper off to check the transfer.

TROUBLESHOOTING TOOMUCHWATERAND THEPAPERWILLTEAR In step 5, if you slop the water on, the paper will become mushy and tear. It’s best to dip the sponge into the water, then squeeze out any excess water. You want the sponge to be damp, not wet.

WHYDIDN’TMY IMAGETRANSFER?

THEPAINTDOESN’TSEEM RIGHTHOWCANIFIXIT?

If the image transfer is too light, there are two

When mixing the paint in step 2, you want

press isn’t tight enough or you didn’t burnish

the consistency of the paint to be buttery, not

enough. If this is the case, repeat step 7 if you

sticky or slippery.

are using a pasta machine, or step 8 if you are

If the paint is slippery, you’ve added too much of the linseed oil. To fix this, add more

burnishing by hand. If the image has been thoroughly burnished,

paint a little at a time until the mixture reaches

perhaps the copy quality is bad. The success of

a buttery consistency. Be sure to mix well after

this transfer depends on the toner-based copy.

each addition of paint.

We find older copiers put more toner on the

If the paint mixture is too sticky, then you’ve

Z2509 pgs 062-071.indd 63

possible explanations. First, the pasta machine

paper. If your transfer results using your home

added too much paint. Add more linseed oil, a

printer or copier are poor, try a print shop; you

bit at a time, and mix well until you reach the

can test images from different machines and

right consistency.

increase the toner if necessary.

63

4/15/09 6:29:57 PM

This technique gives you very crisp

Lazertran with Polymer Medium

transfers onto paper, paintings, Plexiglas, glass, metal, wood and almost anything else. Be sure you buy the correct Lazertran for your printer. The Lazertran attached with the polymer medium can be repositioned, so if you find you have put it in the wrong place you can carefully move it. This is not so with the turpentine application (see page 67). The background will be white when the image dries. You can render it transparent with the optional step of applying an oil-based varnish on top.

LIMITATIONS

Because this is an emulsion transfer and you are using a polymer medium to put it on the surface, there will be a slight edge and plastic feel. Using soft gel on top will make the edge disappear somewhat. SURFACE OPTIONS

This technique works well on almost anything. ARCHIVAL QUALITY

Low to medium, but can be enhanced with a UV-resistant spray. NOTES

seaoflife| Lazertran with polymer transfer painted over with an alcohol dissolve

ARTWORK BY SANDRA DURAN WILSON

Materials  ink-jet printer  Lazertran for ink-jet  background surface  polymer medium (gloss)  oil based varnish (optional)  paintbrush  tray of warm water  paper towels

64

Z2509 pgs 062-071.indd 64

If you wish to make a larger image than the size of the Lazertran, you can resize the image with Photoshop or another software program and print it on several sheets. This is known as tiling. When the transfer has completely dried, you can sand it for an aged look. Do not get the Lazertran sheet wet prior to use, as it glues the emulsion to the paper backing, and won’t let the image slide off. If the Lazertran is old, it will need a longer soaking time. You can print a lot of small images onto a sheet of Lazertran so there is no wasted space.

4/15/09 6:30:33 PM

1 / Prepare image

2 / Blot image

Using the ink-jet printer, print the image onto the Lazertran paper. In the tray of warm water, place the image facedown. In the tray of warm water, place the image facedown. Let the image rest until the transfer sheet starts to release from the backing.

Place the Lazertran with the image on the paper towel and blot well. Be gentle! Lazertran is fragile.

TROUBLESHOOTING

HOWDOIKNOWWHEN THEPAPERISREADY? The paper and the transfer sheet will

3 / Apply polymer medium to background Using the paintbrush, apply a thin layer of the polymer medium onto the background surface.

start to separate. You can test the paper by lightly sliding the transfer sheet from the paper backing; if it moves, it’s ready. If you see white spots on the back side, that is where the transfer sheet is still stuck to the paper. Older Lazertran will be more fragile and take longer to release from the paper backing.

65

Z2509 pgs 062-071.indd 65

4/15/09 6:31:34 PM

4 / Transfer image to background

5 / Adhere image

Holding the bottom edge of the Lazertran with the paintbrush, slide the Lazertran backing out from under the top layer.

Using a clean, damp paintbrush, smooth out any air pockets by making a cross through the image and working out in a radial pattern. Allow the image to dry thoroughly. If your transfer is to be opaque: use a paintbrush and apply polymer medium over the image. If you want the image to be transparent: follow step 6.

6 / Optional step: Transparency If you desire transparency and want to show the surface color and texture underneath the image, apply 2 or 3 coats of any oil-based varnish with a clean paintbrush. Allow the image to dry between coats. This step may have to be repeated several times to achieve the desired transparency. Do not brush over with polymer medium.

66

Z2509 pgs 062-071.indd 66

4/15/09 6:32:22 PM

This technique gives you very crisp

Lazertran with Turpentine

transfers onto almost any surface. When using an ink-jet printer, the background will be white when the image dries. This technique renders the background transparent. To draw on top of the Lazertran image or it use it as a barrier between multiple turpentine transfers, use a clear gesso to seal the image and give the surface tooth.

LIMITATIONS

Old Lazertran or too much turpentine when applied can cause the image to break up. Older Lazertran is also difficult to reposition once it has touched the background surface. Any water left on the image after blotting will leave a pocket where the image is not adhered. SURFACE OPTIONS

This technique works on almost any surface. ARCHIVAL QUALITY

Low to medium; UV-resistant spray is always recommended. NOTES

naturethoughts| Lazertran with turpentine transfer, collage elements and gold leaf on painted surface

You must use real turpentine; alternatives will not work. Be sure to use warm water for this technique; it will take the transfer sheet longer to release from the paper backing if you use cold water. When the transfer has completely dried, try sanding it for an aged look.

ARTWORK BY DARLENE OLIVIA M C ELROY

Materials  ink-jet printer  Lazertran for ink-jet  background surface  turpentine  oil-based varnish  scissors  paper towels  paintbrush  tray of warm water

67

Z2509 pgs 062-071.indd 67

4/15/09 6:32:59 PM

1 / Prepare image

2 / Blot image

Choose an image. Using the ink-jet printer, print the image onto the Lazertran paper. Let the image dry for a half hour. If desired, use scissors to cut out the image. In the tray of warm water, place the image facedown. Let the image rest until the transfer sheet starts to release from the backing.

Place the Lazertran image on the paper towel and blot well.

3 / Apply turpentine to background surface Using the paintbrush, apply a thin layer of the turpentine onto the background.

4 / Apply image to background Holding the bottom edge of the Lazertran, slide the Lazertran backing out from under the top layer.

tip

68

Z2509 pgs 062-071.indd 68

If you’re worried about using too much turpentine, try patting the transfer smooth with your hands instead of applying more turpentine in step 5. Make sure your hands are clean and dry when you begin, and thoroughly wash them when you are finished.

4/15/09 6:34:02 PM

5 / Smooth image

6 / Apply varnish

Using the clean, damp paintbrush, smooth out any air pockets by making a cross through the image and working out in a radial pattern with the remaining turpentine on the brush. Do this carefully.

Allow the image to dry. Using a clean paintbrush, apply 2–3 coats of any oil-based varnish, allowing the artwork to dry between applications.

TROUBLESHOOTING

WHYISITTAKINGALONGTIME FORTHELAZERTRANTRANSFER TOCOMEOFFTHEBACKING? There are three possible reasons for this: the

WHYISMYIMAGE DISSOLVING? If the image is breaking up, you probably

Lazertran is old, the water is too cold or the Lazertran got wet and then dried. Be sure to use warm water for this technique;

have too much turpentine on either your

it will take the transfer sheet longer to release

background or the brush. It’s best to start

from the paper backing if you use cold water.

by applying the turpentine sparingly, and

There is no way to tell if the Lazertran is too old.

adding only what is necessary for the image to adhere to the background.

WHYISN’TMYLAZERTRANIMAGE BECOMINGCLEAR? You probably forgot to apply the oil-based varnish on top of the image. Be sure the image is thoroughly dry before you put it on.

69

Z2509 pgs 062-071.indd 69

4/15/09 6:35:08 PM

Preserve It

This method is a homemade version of a transparency transfer. It is a simple and quick way to get a crisp, clean transfer image. This works great for adding images to journal pages, cards or paintings.

LIMITATIONS

You are limited to the size of your printer feed. SURFACE OPTIONS

This technique works best on paper but it will work on some absorbent paintings like watercolor and thin layers of oil or acrylic. Experiment with other absorbent surfaces.

time tar get | Preserve It! transfer, gum arabic print and

collage

ARTWORK BY SAND RA DURA N WILSO N

ARCHIVAL QUALITY

Medium, but can be enhanced with UVresistant spray. NOTES

You can re-use the freezer paper after rubbing off the transfer. Just spray and print again. After using the paper several times, we found that a skin developed that we could peel off with the transfer on it.

Materials  ink-jet printer  background of choice  freezer or butcher paper  printer paper  Krylon Preserve It! spray  burnisher  scissors  glue stick  workable fixative

70

Z2509 pgs 062-071.indd 70

4/15/09 6:35:45 PM

2 / Spray on Preserve It Adhere the freezer paper, shiny side up, to the copy paper. Using the Preserve It!, spray the freezer paper. Let it dry. You can tell it is dry when the paper isn’t shiny. This should only take a few minutes.

3 / Print image 1 / Trim freezer paper

Choose an image. Using the ink-jet printer, print the image onto the freezer paper. Place the freezer paper image-side down onto the background surface. Using a burnisher, rub the image onto the background. Peel back the paper to check the transfer. Burnish more if necessary.

Using the scissors, trim the freezer paper to a slightly smaller size than the copy paper. Using the glue stick, apply the glue to the dull side of the freezer paper around the edges.

TROUBLESHOOTING WHYDIDMY IMAGESMEAR? If your transfers smears, you forgot to spray it with a workable fixative. If you want it to be a perfect transfer, consider starting over. But if the smear looks cool to you, keep it. Stop what you’re doing and let everything dry thoroughly. Spray with the workable fixative, then let that dry.

4 / Spray with workable fixative Using the workable fixative, spray the image. Allow it to dry thoroughly before embellishing.

Z2509 pgs 062-071.indd 71

71

4/15/09 6:36:57 PM

Transfer Ink

If you want a soft romantic look for your transfer, use an ink-jet printout on regular printer paper, a cotton ball and transfer ink, which is slightly scented. You will get a better transfer if you use a highcontrast image. Different papers will take the image differently. Textured surfaces make it very difficult to get a good transfer.

LIMITATIONS

This technique works with absorbent papers only. If there isn’t enough contrast in the image to be transferred, you will get a fuzzy or flat image with no highlights or shadows. SURFACE OPTIONS

This technique only works on papers.

mem ory | Transfer ink transfers, tea bags, papers and textur ed stamps ARTWORK BY DARL ENE OLIVI A M C ELROY

ARCHIVAL QUALITY

Low, but a UV-resistant spray can help improve the quality.

Materials  ink-jet printer  transfer ink  background paper  cotton ball  tape  copy paper

NOTES

This technique has a perfume odor, so it is not recommended for people with sensitivity to perfume. Be sure to do this technique in a wellventilated area.

72

Z2509 pgs 072-077.indd 72

4/15/09 6:37:42 PM

1 / Place image on background

2 / Spray on transfer ink

Choose an image. Using the ink-jet printer, print the image onto the piece of copy paper. Lay the ink-jet image facedown on the background. Using the tape, secure the image to the background paper.

Using the transfer ink, spray the back of the image. You will see the image appear through the paper.

3 / Blot image Using the cotton ball, blot the back of the image. It is important that you do not rub the image because the paper will break up.

73

Z2509 pgs 072-077.indd 73

4/15/09 6:38:39 PM

4 / Check transfer Lift the edge of the paper to check the transfer. Repeat steps 2 and 3 as needed. When you are satisfied with the transfer, let the image dry thoroughly before embellishing.

TROUBLESHOOTING

THEIMAGEWON’TTRANSFER  WHYNOT?

THEPAPERISBREAKINGUP! CANISAVETHISTRANSFER?

It’s possible that you haven’t used enough

Unfortunately, no. You have probably been

of the transfer ink, or you let it dry out

rubbing the paper too hard, causing it to

before blotting it.

weaken and break up. Start again with the

To fix this, repeat steps 2 and 3 until you get the transfer you want.

image on a new piece of paper and use a lighter touch.

74

Z2509 pgs 072-077.indd 74

4/15/09 6:39:14 PM

Wintergreen Oil

Wintergreen oil, obtained from the creeping wintergreen or teaberry plant, is a simple but very aromatic transfer technique. It’s important to remember the image will be flipped so adjust for that when you make your copy.

LIMITATIONS

The odor can linger for weeks and is not recommended for people sensitive to odors. SURFACE OPTIONS

This technique works best on paper but transfers can be made onto painted surfaces with some degree of difficulty. ARCHIVAL QUALITY

Low to medium.

ode to abu tter fly | Wintergreen oil transfers, gel

direct transfers, stamps and found objects ARTWORK BY DARL ENE OLIVI A M C ELROY

NOTES

If you want to avoid the mess from using a magazine, make a toner-based copy of it. Use the wintergreen oil in a wellventilated area.

Materials  toner-based or magazine image  background paper  wintergreen oil  burnisher  cotton balls  tape  scissors

75

Z2509 pgs 072-077.indd 75

4/15/09 6:39:47 PM

1 / Prepare image

2 / Apply wintergreen oil

Choose a toner-based or magazine image. Using the scissors, cut out the desired image. Using the tape, secure the image facedown onto the background.

Soak the cotton ball with the wintergreen oil.

3 / Image will show through Apply the wintergreen oil to the back of the image; blotting works well. The paper will become translucent, and you will be able to see the image clearly from the back.

76

Z2509 pgs 072-077.indd 76

4/15/09 6:40:45 PM

4 / Burnish image

5 / Check transfer

Using the burnisher, rub the image firmly, making sure to cover the entire area.

Lift the corner of the image to check the transfer. Be sure not to move the image. Continue burnishing until the transfer is complete.

TROUBLESHOOTING WHYISTHETRANSFER SOMUDDY? When the ink from the image runs together, you have used too much wintergreen oil. It’s not possible to save the transfer once this has happened, unless you like the messier look. If you want a clearer transfer, start over from step 1. It is better to add the wintergreen oil slowly, so start with less and add more as needed.

77

Z2509 pgs 072-077.indd 77

4/15/09 6:41:18 PM

Z2509 pgs 078-091.indd 78

4/15/09 6:42:02 PM

everyt hi ng el se Some of the easiest and most versatile techniques are in this section. We played and experimented extensively and came up with some new ways for old tricks. You’ll learn how to turn a rusty object into a cool natural-fabric transfer with Rusting (page 91) and Gelatin Prints (page 82) will bring out the kid in you. You’ll get to play in the sun for Solar Silkscreen (page 93). Transparency with Water (page 99) is one of our favorite techniques, and you can use it on journal pages, books, paintings—just about anything. The diverse materials and tools in this chapter vary as much as the techniq ues themselves and can produce one-of-a-kind images. We bet you can come up with some new methods for old tricks yourself.

79

Z2509 pgs 078-091.indd 79

4/15/09 6:42:16 PM

ExtravOrganza

This paper-backed fabric is very transparent and airy. Though the package says it only works with ink-jet printers, we’ve made it work with a laser printer.

LIMITATIONS

You are limited to the size of the ExtravOrganza sheet, which is 8½" × 11" (22cm × 28cm). SURFACE OPTIONS

ExtravOrganza can be glued to paper, fabric, paintings, watercolors, etchings, Plexiglas and glass. ARCHIVAL QUALITY

Medium, but enhanced with a UV-resistant gel or spray coating.

atr ioo fun cles | ExtravOrganza transfer, Lazertran

transfer,

papers and dimensional objects ARTWORK BY DARL ENE OLIVI A M C ELROY

NOTES

Because ExtravOrganza is so airy, be sure to use images with more contrast and more saturation. If you can’t find ExtravOrganza or don’t want to buy it, you can make your own using butcher paper and organza. See Homemade Ink-Jet Fabric (page 38) for instructions. It should be noted, however, that ExtravOrganza runs through printers with fewer paper jams than the homemade variety.

Materials  image  ExtravOrganza  printer  background surface  polymer medium (gloss)  workable fixative  paintbrush

80

Z2509 pgs 078-091.indd 80

4/15/09 6:42:45 PM

2 / Spray with fixative Peel the fabric from the backing. Using the workable fixative, spray the ExtravOrganza image.

1 / Prepare image Select an image. Print it onto the rough side of the ExtravOrganza. Let the image dry for 15 minutes.

3 / Apply polymer medium Using the paintbrush, apply a layer of the polymer medium to the background surface.

TROUBLESHOOTING WHYISTHE IMAGESMEARING? You probably forgot to spray it with the workable fixative. If you want a perfect transfer, you’ll have to start over. Take care that you spray the image with the workable fixative, and let it dry completely. If you think a little mess adds some character, but don’t want to go too far, follow this advice: Paint over the parts you don’t mind smearing. When you’re satisfied with the look, let the artwork dry completely. Spray it with the workable fixative, and let it dry completely. Once dry, continue embellishing!

4 / Adhere image to background Lay the transfer image onto the background surface. Using the paintbrush, smooth the image onto the background to adhere it and to eliminate bubbles.

81

Z2509 pgs 078-091.indd 81

4/15/09 6:43:41 PM

Gelatin Print

This is like a trip back to your childhood when you could play with your food. For printmakers this is a fun way to do a monoprint with acrylic paints.

LIMITATIONS

You must use a somewhat malleable material to print on such surfaces as paper or fabric. SURFACE OPTIONS

You can print on paper, fabric and wood. Try printing on printed fabrics or found papers. ARCHIVAL QUALITY

Medium to high. NOTES

There are many design options for this technique. You can use stencils for a design, or use a brayer with rubber bands around it to create texture. You can use a knife to carve textures into the gelatin, or do multiple layers or pull a “ghost” print. A ghost is when you take another image from your painted surface without adding additional paint to it. The gelatin can be wiped clean and kept in the fridge for up to a week. Don’t let the paint dry on the surface, or you will lose the moisture-holding ability of the gelatin. If some of the gelatin sticks to your print, just let it dry, and it will disappear. Do not dump the gelatin down the sink drain. Dispose of it in the trash.

und ert hes ea| Gelatin print on paper ARTWORK BY SAND RA DURA N WILSO N

Materials  paper  water-based paints, fluid acrylics or tempera  glass baking pan  unflavored gelatin  mixing bowl  measuring cups and spoons  kettle for boiling water  board or platter

 disposable plate  water  brayer  knife  brushes  objects for impressions  scrap of paper

82

Z2509 pgs 078-091.indd 82

4/15/09 6:44:19 PM

1 / Mix gelatin

2 / Remove bubbles

Mix the gelatin in a ratio of 2 tablespoons gelatin powder per 1 cup of water. Mix the gelatin with a 1/2 cup of water at room temperature. Using the spoon, stir the mixture carefully to remove any lumps. Boil the other half of the water. Using the spoon, stir the boiling water into the gelatin mixture. Once it is mixed, pour the gelatin into the baking dish.

Using a scrap of paper, drag it along the surface to remove any air bubbles.

TROUBLESHOOTING HOWMUCHGELATIN SHOULDIMAKE? To determine the amount of gelatin you need to make, pour water into the glass baking pan until it is 1" (3cm) deep. Pour the water into a measuring cup to see how many cups there are. Next, measure out 2 tablespoons of gelatin for every 1 cup of water. For example, if the pan holds 4 cups of water, you will need 8 tablespoons of gelatin. One package of gelatin is about 1 tablespoon.

WHYISTHEGELATIN FALLINGAPART?

3 / Release gelatin

If the gelatin starts to break up, this

Put the gelatin in the refrigerator, and let it firm completely (this could take overnight). When it is firm, let the gelatin rest at room temperature for about 20 minutes. Run a knife along the edges of the gelatin. Hold the pan in warm water to help release the gelatin from the sides of the dish. Place a hard work surface over the top of the dish, and flip it. Lift the container up to release the gelatin. This might take some wiggling.

means you don’t have the right ratio of

Z2509 pgs 078-091.indd 83

ingredients. Often you can put it in the refrigerator longer to firm it up. If this doesn’t help, make a new batch.

83

4/15/09 6:45:16 PM

4 / Decorate gelatin

5 / Transfer image

Using the disposable plate as a palette, put out and mix the water-based paints of your choice (fluid acrylics work well). Decorate the gelatin by using the brayer or the paintbrush to apply paint to the surface of the gelatin.

Take your background surface and press it on the top of the painted gelatin.

TROUBLESHOOTING

WHATCANIDOTO ADDTEXTURETO THISTRANSFER? There are lots of fun ways to add texture to a gelatin print. If you desire, lay down objects such as leaves, strings or stamp patterns into the paint. Or even paint on

6 / Optional step: Re-use gelatin When you are finished with the gelatin, you can carve into the gelatin to show more pattern. Apply more paint if needed. Repeat step 5 to create a new print.

84

bubble wrap to give the piece texture. You can lay paper shapes onto the gelatin to create areas that will have no paint when printed. Flip those paper pieces to use them again (see above photo). Sandra’s favorite way to add texture: Paint the gelatin surface however you like. Then put rubber bands on a brayer and roll it through the paint. You’ll be surprised with the pattern every time!

Z2509 pgs 078-091.indd 84

4/15/09 6:45:53 PM

Jacquard Cotton is an easy and fast

Jacquard Cotton

way to print on fabric. If you have a new or temperamental printer then use the store-bought products we used here. The cotton will give you a texture similar to canvas. You can also print several images, on one sheet and cut them out to use in different projects.

LIMITATIONS

You are limited to the 8.5" × 11" (22cm × 28cm) size of Jacquard Cotton for Ink-Jet Printing. SURFACE OPTIONS

You can adhere Jacquard Cotton to almost anything. ARCHIVAL QUALITY

Low, but improves with a UV-resistant spray or varnish. NOTES

If you are worried about paper jams in your printer, go with this product. You can also use the cotton for sewing things together or using brads instead of glues or gels. The cotton can go over some textured surfaces. You can also cut it up and sew it or apply it over sculptural objects.

time | Ink-jet cotton transfer, ink-jet gampi transfer, papers and embellishments

ARTWORK BY SANDRA DURAN WILSON

Materials  ink-jet printer  Jacquard Cotton for Ink-Jet Printing background surface  workable fixative  scissors (optional)  paintbrush  polymer medium (gloss)

85

Z2509 pgs 078-091.indd 85

4/15/09 6:46:38 PM

2 / Remove image from backing Let the image dry thoroughly. Peel the fabric from the paper backing.

3 / Cut out image 1 / Prepare image Select an image. Using the ink-jet printer, print it onto the rough side of the Jacquard Cotton for Ink-jet Printing sheet. Let the image dry for 15 minutes. Using the workable fixative, spray the image.

If desired, use the scissors to cut out selected shapes or design elements.

TROUBLESHOOTING 4 / Apply ISPRAYEDTHEIMAGEWITH THEWORKABLEFIXATIVE ANDITSTILLSMEARED WHATSHOULDIDO? If your image starts to smear, stop and

polymer medium to background Using the paintbrush, apply the polymer medium to the background surface.

spray with workable fixative. Allow it to dry thoroughly. You may want to put on a few coats of workable fixative; it may also help to spray both sides of the cotton.

5 / Adhere image to background Lay the transfer onto the background surface. Using the paintbrush, smooth and brush down the edges.

86

Z2509 pgs 078-091.indd 86

4/15/09 6:47:30 PM

With this technique, you get two prints

Reverse Monoprint

for the price of one: both the line drawing and a negative image. You can make prints from your own drawings or use a high-contrast image or photograph to create a reverse monoprint.

LIMITATIONS

You can only use oil paints or specialty water-based printing inks. SURFACE OPTIONS

This technique works on paper and fabric. ARCHIVAL QUALITY

High. NOTES

It is fun to experiment with different papers, patterned papers and printmaking and found papers. The prints can be enhanced with markers, paints, collage, etc. For an easy cleanup, use baby oil to remove the paint from the tools and surfaces. Then, wash the items with soap and water and let them dry thoroughly.

carmenduet| Reverse monoprint transfer and watercolor on heavy print paper

ARTWORK BY SANDRA DURAN WILSON

Materials  line drawing of image  background surface  piece of Plexiglas  oil paint  pencil  brayer  palette knife  tape  linseed oil  barren  ruler  two wooden blocks of equal height  gloves  wax paper or palette

87

Z2509 pgs 078-091.indd 87

4/15/09 6:48:12 PM

1 / Prepare image

2 / Mix paints

Choose an image and make a line drawing using your favorite method.

On a hard surface covered with wax paper or a palette, put out the oil paints of your choosing. Using the palette knife and wearing gloves, mix the colors with a small amount of linseed oil to aid the mixing, until you reach the desired color. Approximately 1 or 2 drops of linseed oil to a pea-size amount of oil paint should work.

TROUBLESHOOTING THEPAINTDOESN’TSEEM RIGHTHOWCANIFIXIT? When mixing the paint in step 2, you want the consistency of the paint to be buttery, not sticky or slippery. If the paint is slippery, you’ve added too much of the linseed oil. To fix this, add more paint a little at a time, until the mixture reaches a buttery consistency.

3 / Load brayer

Be sure to mix well after each addition

Using the palette knife, spread the paint over the wax paper or palette. Using the brayer, roll it back and forth in the paint until it is loaded with paint.

of paint. If the paint mixture is too sticky, then you’ve added too much paint. Add more linseed oil, a bit at a time, and mix well until you reach the right consistency.

88

Z2509 pgs 078-091.indd 88

4/15/09 6:49:11 PM

4 / Apply paint to Plexiglas

5 / Secure printmaking paper

Using the brayer, coat the piece of Plexiglas evenly with the paint. Paint an area the size of the selected image.

Carefully lay the printmaking paper over the painted area. Using the tape, secure the paper to the Plexiglas, being careful not to touch the surface.

tip To ensure even coverage when painting the Plexiglas, you can hold it up to a light source to check for missing spots prior to making your monoprint.

6 / Trace image Lay the paper with the line drawing over the printmaking paper. Using the tape, secure the image onto the printmaking paper. Using two pieces of wood and a ruler, create a bridge to keep from touching the surface. Using a pencil, trace the line image.

tip Using a colored pencil will allow you to see where you’ve already traced over the image.

89

Z2509 pgs 078-091.indd 89

4/15/09 6:49:46 PM

8 / Prepare second image When you are satisfied with the tracing, peel off the image. Hold up the Plexiglas to a light source to see the image you’ll get in the next few steps. If desired, add marks using various tools.

9 / rub second

7 / Check transfer

image

Peel back the image carefully to check the transfer.

Lay the second piece of clean paper over the painted surface. Using the tape, secure the paper to the Plexiglas. Using the barren or a clean brayer, rub the paper.

TROUBLESHOOTING WHYARETHERESMUDGES ONMYPRINT? Smudges are usually a result of your hand pressing against the paper as you trace the image. If you want the cleanest lines possible, use the wood blocks and ruler in step 6.

IDECIDEDTOUSEAHEAVY PAPERANDTHETRANSFER ISREALLYLIGHTCANIUSE THISPAPER? You can use most papers with this technique. If you choose a heavier paper, it helps to mist the paper with water. Lighter-weight papers can usually be used dry.

10 / Check transfer Peel back the paper to check the transfer. Continue braying until the desired transfer is reached.

90

Z2509 pgs 078-091.indd 90

4/15/09 6:50:23 PM

Rusting objects is an easy and fun way

rusting

to get somewhat abstracted transfers. We are both scavengers, always on the lookout for items that will translate and be re-purposed into art projects. Old rusty objects work great for transferring onto fabric. This is a wonderful method for inspiring a project. Start with the rust transfer on fabric, and see where it leads you.

LIMITATIONS

This technique can take a while to achieve a deep-colored transfer. You also have to keep the fabric moist with water and keep adding salt. The color of the transfer will always be an orange-brown. SURFACE OPTIONS

This technique works great on natural fabrics; it can work on some papers. ARCHIVAL QUALITY

Medium, but we recommend spraying the dried fabric with a preservative and finishing the artwork with a UV-resistant varnish.

solqueen| Rust transfers with fabric and dimensional embellishments

NOTES

ARTWORK BY DARLENE OLIVIA M C ELROY

The more orange the rust, the better this technique works.

Materials  rusty object with a heavy build-up of iron oxide (will be orange)  all natural fabric  salt  spray bottle of water  trap or plastic bag  paper towel

91

Z2509 pgs 078-091.indd 91

4/15/09 6:51:01 PM

2 / Wet fabric Using the spray bottle with water, thoroughly wet the fabric.

3 / Salt fabric 1 / Prepare rusty object

Press the fabric into the rusted object. Sprinkle a generous amount of salt over the fabric. Using the spray bottle, wet the fabric again. Be sure to keep the fabric from moving over the object.

Protect your working surface from getting wet with a plastic tarp or bag. Place the rusted object on a few layers of paper towels. Place a layer of the natural fiber fabric over it.

TROUBLESHOOTING

HOWCANIACHIEVEA REALLYSTRONGTRANSFER? Here are a few tips: Have the wet fabric touching as much of the surface as possible. You should be able to see a strong outline of the rusty object. If there are bubbles, the fabric is not pressed against the object well. Choose the right materials. A really rusty object will make for a better transfer to the fabric. Natural fabrics work faster and better than synthetics. Finally, be patient. This transfer can take some time to achieve a strong

4 / Check transfer Let the fabric sit for several hours or even overnight. Continue to keep the fabric wet, and add salt as desired. When you are satisfied with the transfer, let the fabric dry. Rinse the salt off the fabric. Let the fabric dry again before adding it to any artwork.

image. Be sure the fabric never dries out; it must be wet to keep the transfer active. And be generous with the salt.

Z2509 pgs 092-107.indd 92

4/15/09 6:52:08 PM

PhotoEZ film is a wonderful for creating

Solar Silkscreen

silkscreens that can be used with acrylic paints. This method can be used like you would a stamp, but it will work on curved surfaces. You can use it with paints for glass or ceramics as well. Unlike a stencil, you don’t have to worry about cutting the image out correctly.

LIMITATIONS

It is limited to the size of the PhotoEZ film. SURFACE OPTIONS

You can use the silkscreen to print onto any surface using the appropriate paint for wood, metal, glass, etc. You can also use it to etch glass. ARCHIVAL QUALITY

The archival quality is as good as the paint you use. NOTES

coffeetime| Solar silkscreen transfer, stamping and embellishments ARTWORK BY DARLENE OLIVIA M C ELROY

Materials  PhotoEZ film  high-contrast black-and-white ink-jet or toner-based image  copy paper or transparency  background surface  exposure frame (see Notes to make one)  tray with water  heavy body acrylic paint  rigid piece of plastic, like an old credit card, or palette knife  paintbrush  sunlight  watch or timer  scissors  binder clips  foam plate  towel

Z2509 pgs 092-107.indd 93

It is preferable that the screen is in the dark before exposing it to sunlight. Work with the least amount of light possible until you get comfortable enough with the process to turn out the lights. To create the image, use a computer program to make a high-contrast image. If you don’t know how to do this, go to a print shop and ask them to help you make a highcontrast photocopy. If you are printing on your ink-jet or laser printer at home, use an everyday copy paper (20 lb./84 brightness or less) and print on a high quality setting. You may also print the image onto a transparency (see different exposure times in step 4). You could buy an exposure frame, or you can make one yourself, as we have done. Attach a piece of black felt to a particle board. Get a piece of Plexiglas trimmed to the same size as the particle board. Hold it all together with four or more binder clips.

93

4/15/09 6:52:50 PM

1 / Prepare image

2 / Remove PhotoEZ film backing

Print the high-contrast image on either the copy paper or the transparency using the high quality setting on your printer. The image should be at least ½" (1cm) smaller than the PhotoEZ film. Place the image face up on the Plexiglas.

Using the scissors, cut the PhotoEZ film to the desired size. Peel the backing off of the PhotoEZ film.

3 / Assemble exposure frame Place the film shiny-side down over the image. Place the black felt board on top. Using the clips, secure the boards together. Flip the frame over. Immediately cover the image with the towel.

tip Temperature doesn’t affect this transfer technique, but the technique will take less time in summer months than in the winter. The sun is more intense both in the warmer months and at midday. Your location relative to the equator will also determine the intensity of the sun.

94

Z2509 pgs 092-107.indd 94

4/15/09 6:53:48 PM

4 / Expose film

5 / Soak film

Take the screen outside. Remove the towel. Expose the film to the sunlight for 1 minute +/-10 seconds for a transparency and 5 minutes +/-1 minute for paper.

Cover the exposure frame with the towel and bring back inside. Open the frame and remove the film. Immediately place the film shiny-side up into the tray of water. Let the film soak for approximately 15 minutes.

7 / Remove emulsion Using the foam plate for support, gently brush the film with a soft paintbrush and some running water to remove the excess emulsion coating.

95

Z2509 pgs 092-107.indd 95

4/15/09 6:54:20 PM

8 / Harden film and paint image

9 / Reveal image

Place the film on the Plexiglas and let it dry in the sun to harden it. This is a very important step. If the film is not hardened, the silkscreen will be ruined. Tape the image onto the background surface. Using the rigid piece of plastic (such as an old credit card) or a palette knife, gently spread over and push the heavy body acrylic paint into the film.

Peel the film from the background. Wash the transfer immediately for re-use.

TROUBLESHOOTING

WHYWON’TTHEPAINTGO THROUGHTHESILKSCREEN? A lot of what you do to the screen before it’s painted will determine the quality of the print. While preparing the film and the image, do not expose the film to direct lighting. Work in a low-lighted area (or no lights once you’re comfortable with the process). If you overexpose the film, it cooks the emulsion on so the paint can’t go through the screen. Also, be sure to harden the film as directed in step 8.

WHYISTHEPAINTBLEEDING? If the paint you chose is making a mess, it is probably too thin. We recommend using heavy body acrylics because you have more control over

96

Z2509 pgs 092-107.indd 96

the paint.

4/15/09 6:54:52 PM

Stencils work best when all the cutout

Stencil

areas of are linked. If you have bits and pieces of small parts you are using to mask out areas, spray them lightly with spray glue or use a glue stick before putting them down. It is easier to paint using either spray paint or a stencil brush. If you lift a corner of the stencil, you can get some interesting under spray. Remember to let the paint dry slightly before you lift the stencil.

LIMITATIONS

Thick plastics are harder to cut and will take more time. Depending on the image, it can also be difficult to determine which areas should be cut out. SURFACE OPTIONS

This technique works on any surface you can paint on. ARCHIVAL QUALITY

High. NOTES

kahlo| Stencil transfer, stamping and dimensional embellishments

Once you have created the high-contrast image you can make different sizes using either a computer photo program or the ratio or size command on a photocopier. The thinner the plastic, the easier it will be to cut. It also helps to have a very sharp blade for the craft knife.

ARTWORK BY DARLENE OLIVIA M C ELROY

Materials  high-contrast image  background surface  transparent plastic sleeve  craft knife  cutting mat  permanent marker  acrylic paint  stencil sponge

97

Z2509 pgs 092-107.indd 97

4/15/09 6:55:29 PM

1 / Prepare image

2 / Cut plastic

In a computer program, create a high-contrast image and print it. You may also do this with a copy machine by working with the contrast settings. Lay the plastic over the image. Using the permanent marker, outline the areas to be cut out (these would be the dark areas).

Using the cutting mat and the craft knife, cut and discard the outlined areas of the plastic.

3 / Paint stencil Place the stencil on top of the background surface. Using the sponge and acrylic paint of your choice, sponge over the stencil. Gently remove the stencil. Let the paint dry completely before embellishing.

tip For a quick paint cover, try using an acrylic spray paint. Slightly lifting the stencil can create an interesting splatter effect for your finished art piece.

98

Z2509 pgs 092-107.indd 98

4/15/09 6:56:32 PM

This technique works to transfer ink-jet

Transparency with Water

images onto absorbent surfaces such as paper and cloth. You can use this technique to transfer to book pages that could not be run through a printer. If you use multipurpose transparency film (for copiers, laser and ink-jet printers) you have more flexibility for all kinds of uses. This technique is fast and easy, and the result is like magic.

LIMITATIONS

You are limited to the size of the transfer film. Textured papers are harder to use. SURFACE OPTIONS

This technique works on absorbent surfaces like paper or fabric. ARCHIVAL QUALITY

Low to medium, but a UV-resistant spray does enhance archival quality. NOTES

The variety of papers available today is almost endless, each one having its own look and texture. But some papers will work better than others for this technique. The more texture or less absorbent the surface is, the more difficult it will be to get a good transfer. Experiment with papers to see which ones you like best.

orientallilies| Multiple transparency transfers on printed papers ARTWORK BY SANDRA DURAN WILSON

Materials  ink-jet printer  background surface  multipurpose transparency film (for all printers)  spray bottle with water  brayer  towel

99

Z2509 pgs 092-107.indd 99

4/15/09 6:57:14 PM

1 / Wet background paper

2 / Place image

Lay the background paper onto the towel. Using the spray bottle with water, moisten the background paper so it is damp but not soaking wet.

Choose an image. Using the ink-jet printer, print the image onto the transparency sheet. Lay the transparency ink-side down onto the background paper.

3 / Burnish image Using the brayer, burnish the image with gusto. Start from the middle and work your way out, making sure not to move the transparency.

100

Z2509 pgs 092-107.indd 100

4/15/09 6:58:03 PM

4 / Check transfer Lift a corner of the transparency sheet to check how the image is transferring. If the transfer is too light, re-spray and burnish again.

FORTHINNERPAPERS

TROUBLESHOOTING

For thinner papers, you can lift a corner of the transparency and

HOWCANIGETTHE TECHNIQUETOWORK ONDIFFERENTPAPERS?

spray the paper with

The tricks to a good transfer with this tech-

could also try flipping

nique are the wetness of your receiving paper

the paper over, wet-

and the amount of pressure you use with the

ting the opposite side,

brayer. If your surface is too wet, you get a

placing the image ink-side down and burnishing.

mushy image; if the surface isn’t damp enough,

more water, and then burnish again. You

Thinner papers should be wet, but not shiny.

the image won’t transfer well. Follow these tips

Use paper towels to blot any shiny areas or

for a great transfer.

puddles of water before laying the transparency on the paper.

FORMOSTHEAVYPAPERS Heavier papers such as watercolor and printmaking papers will need to hold more moisture. These papers may need to be soaked in a tray of water before using them. If it’s too dry, the transfer will be grainy, as you can see in the photo on the left. As with the thinner papers, the heavyweight paper should be wet, but not shiny. Lightly blot the paper with a paper towel to soak up any shiny areas or puddles of water before laying the transparency on the paper.

Z2509 pgs 092-107.indd 101

4/15/09 6:58:33 PM

Water slide Decal

There are different brands of water slide decals and they come in both clear or white. We use a brand from DecalPaper.com. The white will show as white on the transfer, and the clear will show the background through the white portions of the image. This transfer is similar to the Lazertran technique, but the image won’t be as crisp.

LIMITATIONS

You are limited to the size of the decal: 8½" × 11" (22cm × 28cm) size. SURFACE OPTIONS

Works on paper, wood, glass, paintings and ceramics. ARCHIVAL QUALITY

Low, but the quality can be enhanced by using a UV-resistant spray. NOTES

Determine which decal, clear or white, will work best for your project. A clear decal that is printed with similar colors to the background will virtually disappear. If the colors are in sharp contrast, then only the white will disappear. If you want the colors and white portions of the image to show, choose the white decal paper. The white decals need more workable fixative to fix the image.

ode to lou | Water slide decal transfers (both clear and

white),

collage, stamping and embellishments ARTWORK BY DARL ENE OLIVI A M C ELROY

Materials  ink-jet printer  water slide decal paper  background surface  workable fixative  polymer medium (gloss)  paintbrush  paper towels  tray of warm water  scissors

102

Z2509 pgs 092-107.indd 102

4/15/09 6:59:03 PM

1 / Prepare image

2 / Soak image

Choose an image. Using an ink-jet printer, print the image onto the glossy side of the clear or white decal paper. Let the image dry. Spray the photos with the workable fixative. Apply several coats of the workable fixative, allowing it to dry thoroughly between each coat.

Using the scissors, cut out the desired image. Place the decals into the tray of warm water for about a minute or until the decal begins to slide from the paper backing.

TROUBLESHOOTING

THEDECALDISSOLVED ANDTHECOLORS AREBLEEDING WHATHAPPENED? If the decal breaks apart and the colors bleed after you put it in the water, then

3 / Blot decal Place the decal between a few paper towels, and gently blot the excess water.

you didn’t spray enough of the workable fixative. You can still use this decal, but it will be harder to work with. For a clearer image, spray several

103

coats of the fixative. Let the image dry thoroughly between each coat.

Z2509 pgs 092-107.indd 103

4/15/09 6:59:55 PM

4 / Apply polymer medium to background Using a paintbrush, apply a thin coat of the polymer medium to the surface where the decal will be applied.

5 / Apply image to background Holding the top edge of the decal paper with your fingers, slide the decal paper backing out from under the top layer. This leaves the decal affixed to the background surface.

6 / Seal image Using the paintbrush, apply a thin coat of the polymer medium over the decal to seal it. Let the artwork dry thoroughly before embellishing.

104

Z2509 pgs 092-107.indd 104

4/15/09 7:00:32 PM

Yupo is a nonabsorbent polyester

Yupo Skin

paper, sometimes used by watercolorists, and it’s a great way to create a pull-off gel skin. You can print or draw onto the Yupo, then transfer the image. You can use these gel skins as collage elements.

LIMITATIONS

This technique does not work as well with ink-jet printers, but we did get some interesting abstract results. If you are printing onto the Yupo, the size is limited to the size that can fit in the printer feed. If you are drawing or painting, you can use the large sheets of Yupo. SURFACE OPTIONS

Yupo transfer can be adhered to paintings, paper and panel. You can roll the skins into sculptural forms. ARCHIVAL QUALITY

The archival quality depends on the paints or inks you choose. NOTES

Materials  Yupo paper  background surface 

There are many ways to decorate the Yupo sheet before making the skin. You can draw or paint the Yupo using acrylics, watercolors, oil pastels and so much more—experiment to find out what you like best. For a crisp transfer image, make a laser or toner copy onto the Yupo paper. Then follow steps 2 through 6 to complete the technique. Ink-jet prints and watercolors need to be sprayed with a workable fixative. Yupo paper can be used multiple times. If you need to store the skins, separate them

watercolor and acrylic paint  oil pastels  workable fixative 

with wax paper.

floating| Watercolor Yupo transfer, oil pastel and glitter ARTWORK BY SANDRA DURAN WILSON

soft gel (gloss)  paintbrush  palette knife  brayer

105

Z2509 pgs 092-107.indd 105

4/15/09 7:01:08 PM

1 / Paint Yupo paper

2 / Spray image with fixative

Using Yupo as the substrate, create a background image using watercolors, oil pastels or acrylic paints.

Allow the background to dry thoroughly. Using the workable fixative, spray the design. Allow the design to dry thoroughly, then apply a second coat of the workable fixative.

3 / Apply soft gel to image

4 / Peel skin from Yupo

Allow the background to dry thoroughly. Using a palette knife, apply a thick, even coat of the soft gel.

Allow the soft gel layer to dry thoroughly, which may take overnight or longer. It will be cloudy until completely dry. When the soft gel is clear, peel it from the Yupo backing.

106

Z2509 pgs 092-107.indd 106

4/15/09 7:01:57 PM

TROUBLESHOOTING ASIWASTAKINGTHESKIN OFFTHEYUPOPAPERIT RIPPEDWHATHAPPENED? The gel layer is probably too thin, but you might be able to fix the tear. Lay the skin back onto the Yupo sheet. Using the palette knife, spread an even layer of the soft gel over the skin. Wait until it has dried completely before trying to pull it off again. If you created a large skin, don’t pull it all off at once. Pull a section and let it breathe for a while, then pull some more.

5 / Apply medium to background Using a paintbrush, apply a medium layer of the soft gel to the background surface. Lay the Yupo skin on top of the soft gel.

MYDESIGNISSMEARING HOWCANIFIXTHAT? Add some extra layers of workable fixative. Be sure to let each layer dry thoroughly before adding the next.

IKEEPGETTINGINDENTS ONTHESKINSURFACE HOWCANIAVOIDTHOSE? This phenomenon is know as crazing. You can avoid this by layering 2 or 3 thinner coats of the soft gel. Let each layer dry thoroughly before adding the next.

6 / Brayer skin to background Using the brayer, press the Yupo skin down. Allow it to dry thoroughly.

107

Z2509 pgs 092-107.indd 107

4/15/09 7:02:29 PM

Z2509 pgs 108-125.indd 108

4/15/09 7:03:04 PM

in spir at io na l proj ec ts This section features art pieces created by combining several techniques—an exciting way to add layers of depth, contrast and mystery to your art. The approaches for these projects are typical of how we work. Darlene is the storyteller, more representational in style. Her background as an illustrator can often be seen in her work. Darlene’s favorite transfer techniq ues are Lazertran, blender marker, dry gel and gampi. Nicknamed Oscar, she is a spontan eous artist and loves exploring new techniques. Sandra has a scientific, painting and printmaking background. She often uses scientific concepts in her work. Nicknamed Felix, she thinks out her artwork and loves to experiment. “What would happen if I tried this and why?” are the questions she most often asks. Her favorite transfers are Preserve It!, gum arabic and transparencies. We hope these projects give you a starting point to combine your favorite techniques and inspire you by showing the wide range of possibilities and styles.

109

Z2509 pgs 108-125.indd 109

4/15/09 7:03:19 PM

Z2509 pgs 108-125.indd 110

4/15/09 7:03:45 PM

pa ra de BY DARLEN E OLIVIA M C ELROY

Looking at an all-white surface is uninspiring compared to a surface that has

anything on it, so I have been having fun starting with black gesso surfaces then I go back in with white gesso to create patterns and shapes. Often I stamp with bubble wrap or embossed wallpaper. Since I know I am going to work with an image transfer that has transpar ent areas, the images will show in the white areas and disappear in the black. This makes the piece of art somewhat atmospheric. Often embellishments are glued to the surface before I lay down the image transfer. It allows for subtle or ghostlike images that may not be seen immediately but that viewers slowly discover.

Techniques Lazertran With Turpentine (see page 67) / Gel Skin (see page 20)

Materials Masonite board, canvas or panel  gesso, black and white  small paper embellishments  acrylic paint in yellow, taupe and metallic gray  soft gel (gloss) oil-based varnish  turpentine  paintbrush  scissors  paint scraper  materials for the above transfer techniques

111

Z2509 pgs 108-125.indd 111

4/15/09 7:03:58 PM

1 / Apply gesso to background

2 / Adhere embellishments

Using the paintbrush, apply black gesso to the Masonite board, canvas or panel. Allow the black gesso to dry thoroughly. Using the paint scraper and paintbrush, apply the white gesso in the desired design. Allow the white gesso to dry thoroughly.

Using the cleaned paintbrush and soft gel, adhere the small paper embellishments.

3 / Prepare Lazertran image

4 / Smooth Lazertran image

Prepare an image using the Lazertran With Turpentine technique (see page 67). Slide the image onto the background as directed on page 68.

Smooth out the surface of the Lazertran image as directed on page 69.

112

Z2509 pgs 108-125.indd 112

4/15/09 7:04:22 PM

5 / Apply oil-based varnish and turpentine mixture Allow the piece to dry thoroughly. Using a paintbrush, apply a thin coat of a 2-to-1 mixture of the oil-based varnish and turpentine over the image. Allow it to dry thoroughly. You may have to apply the mixture more than once to make the white parts of the image transparent. Let the piece dry thoroughly.

6 / Prepare Gel Skin image Prepare an image using the Gel Skin technique (see page 20). When you are finished rubbing the paper from the back, paint the back with the yellow acrylic paint. Using the scissors, cut into desired shapes. Using the paintbrush, adhere the gel skin to the background with the soft gel.

7 / Add paint Using the paint scraper, add the metallic gray and taupe paints. Allow the art to dry thoroughly.

tip After applying the oil-based varnish and turpentine mixture, a thin layer of clear gesso will allow you to go back in with acrylics and colored pens or to layer the piece with turpentine transparencies.

113

Z2509 pgs 108-125.indd 113

4/15/09 7:04:57 PM

Z2509 pgs 108-125.indd 114

4/15/09 7:05:28 PM

Po et ry of th e Ga rd en BY SANDRA DURAN WILSON

I am a concept artist. I work from an idea or a feeling. My work is usually abstract I love to bring in shapes and forms from many sources to create layers of meaning

, but

,

mystery and history. The crackle surface of this piece reminds me of the droughts we experience the desert; and the lush vines and leaves remind me how abundant life can be

in

with

a little nurturing. The fabric I chose has a crackle print to it so I am beginning with that layer. I add shapes and forms that I see in my garden and print these with my ink-jet printer. I paint and add pages of poetry and found objects.

Techniques Homemade Ink-Jet Fabric (see page 38)

Materials patterned fabric  workable fixative  palette knife  soft gel (gloss)  mat board  acrylic paints of choice  embellishments of choice  heavy gel (matte)  wax paper  scissors  materials for the above transfer technique

115

Z2509 pgs 108-125.indd 115

4/15/09 7:05:41 PM

1 / Prepare Homemade Ink-jet Fabric image Prepare a background using the Homemade Ink-Jet Fabric technique using a patterned fabric (see page 38). Let the fabric dry for about an hour.

2 / Adhere image to mat board Spray the fabric with the workable fixative. Allow it to dry thoroughly. Peel the fabric from the butcher paper. Using the palette knife and the soft gel, adhere the printed fabric to the mat board.

3 / Paint fabric background Using a piece of wax paper as the palette, mix the colors as desired. Using the paintbrush, paint the fabric as desired. Let the background dry thoroughly.

116

Z2509 pgs 108-125.indd 116

4/15/09 7:06:03 PM

4 / Adhere embellishments

5 / Add more embellishments

Paint any embellishments. Using the scissors, cut them into desired shapes. Using the palette knife, adhere those and other embellishments to the background using the soft gel. Let the art dry thoroughly.

If desired, add more embellishments, including found objects. Adhere them to the background with the soft gel. When satisfied with the design, let the artwork dry. Using the palette knife, add a layer of the heavy gel (matte) to seal the surface. Allow the piece to dry thoroughly.

117

Z2509 pgs 108-125.indd 117

4/15/09 7:06:33 PM

Z2509 pgs 108-125.indd 118

4/15/09 7:07:00 PM

Autu mn Wa lk BY DARLEN E OLIVIA M C ELROY

Being a very narrative artist, I believe each piece is a story. Normally I work

in a puzzle-

solving and stream-of-consciousness style. Surrounded by texture-making tools and bits and pieces of imagery, I begin

looking

for the story in all elements. I want people to see something new every time

they look at the art. Often you will find a main story and a secondary story in my work because that is how life really is. In Autumn Walk, you have the woman walking her dog who is looking at her with adoration and making her feel special (the crown). The girl in the strip of plastic heat on the left could be someone left behind, someone that wishes she had a dog, or perhaps she had to give her dog away. I find it best to let the viewers find their own story because mine is not always the one they see.

Techniques Gampi/Silk Tissue (see page 58) / Plastic Heat (see page 45) / Gel Skin

(see page 20)

Materials background surface  paper embellishments  polymer medium  soft gel (gloss)  acrylic paint  textured wallpaper or stamp  paintbru sh  sponge brush  scissors  paper towels  UV-resistant spray or varnish  materials for the above transfer techniques

119

Z2509 pgs 108-125.indd 119

4/15/09 7:07:14 PM

1 / Adhere embellishments to background Using the paintbrush, adhere the paper embellishments onto the background using the polymer medium.

2 / Prepare Gampi/Silk Tissue image Prepare your chosen image using the Gampi/Silk Tissue technique (see page 58). Using the paintbrush, adhere the image to the background using the polymer medium. Allow it to dry thoroughly.

3 / Add more embellishments Using a paintbrush, add the embellishments and the imagery using the soft gel.

120

Z2509 pgs 108-125.indd 120

4/15/09 7:07:36 PM

4 / Prepare Plastic Heat image Using the paintbrush, brush over the imagery with the soft gel. Adhere any other desired embellishments using the paintbrush and soft gel. Using the paper towels, wipe off any excess soft gel. Prepare an image using the Plastic Heat technique (see page 45). Using the scissors, trim the image into a shape or shapes you desire. Using the paintbrush and soft gel, adhere the plastic heat image to the background.

5 / Prepare Gel Skin image Prepare an image using the Gel Skin technique (see page 20). Using the scissors, cut into desired shapes. Using the paintbrush and soft gel, adhere the pieces to the background. Allow the artwork to dry thoroughly.

6 / Apply stamp Using the sponge brush, paint the piece of textured wallpaper or a stamp with acrylic paint. Stamp the image onto the background. Let the piece dry. Finish the art with the UV-resistant spray or varnish.

121

Z2509 pgs 108-125.indd 121

4/15/09 7:08:06 PM

Z2509 pgs 108-125.indd 122

4/15/09 7:08:36 PM

Magi c Ca rpet Ri de BY SANDRA DURAN WILSON

I love experimenting with all the transfer techniques and mediums. I end up

with lots of bits and pieces from my play so I will give myself a challenge to create somethi ng from all the leftovers. This piece is created from some of my experiments with liquid polymer, ExtravOrganza, plastic heat and painted book pages.

Techniques Liquid Polymer Skin (see page 43) / Plastic Heat (see page 45) / ExtravOrg anza (see page 80)

Materials background surface  crackle paste  light molding paste  heavy-body acrylic paint in yellow  acrylic paint in blue, red and white  Golden Micaceous Iron Oxide (Golden)  soft gel (gloss)  palette knife paintbrush  paper towels  small cup  scissors  stencil 



UV-resistant spray varnish  materials for the above transfer techniques

123

Z2509 pgs 108-125.indd 123

4/15/09 7:08:49 PM

1 / Apply crackle paste

2 / Paint crackle paste

Using a palette knife, apply a layer of crackle paste with a thicker center and thinner around the edges. I am working on mat board, but it is best to work on a rigid surface with crackle paste.

Let the crackle paste dry thoroughly. It may take 24 hours for all the cracks to develop. Do not force dry. Using a paintbrush, paint the crackle paste using the yellow heavy body acrylic paint. Let the paint dry.

3 / Add stain

4 / Prepare Liquid Polymer image

In a small cup, mix a small amount of the Golden Micaceous Iron Oxide with water. Using the paintbrush, paint a layer of watered-down iron oxide over the crackle. Using the paper towel, wipe the iron oxide mixture from the surface. The iron oxide will stay in the cracks.

Prepare an image using the Liquid Polymer Skin technique (see page 43). Paint the embellishments. Using the scissors, cut the embellishments into the desired shapes. Using the paintbrush and the soft gel, adhere the embellishments and the liquid polymer image to the background. Let the artwork dry.

124

Z2509 pgs 108-125.indd 124

4/15/09 7:09:11 PM

5 / Prepare Plastic Heat image

6 / Prepare ExtravOrganza image

Using the paintbrush, paint a border around the background with the red acrylic paint. Using the soft gel, adhere more embellishments as desired. Prepare an image using the Plastic Heat technique (see page 45). Using the scissors, cut the image into any desired shapes. Using the paintbrush and soft gel, adhere the shapes to the background.

Prepare an image using the ExtravOrganza technique (see page 80). Using the scissors, cut the image into the desired shapes. Using the paintbrush and soft gel, adhere the shapes to the background. Allow the piece to dry thoroughly.

7 / Apply light molding paste

8 / Paint molding paste

Using the stencil and the palette knife, apply light molding paste through the stencil to the background.

Carefully pull the stencil off. Using the paper towel, wipe up any mistakes. Allow the molding paste to dry thoroughly. If desired, paint the molding paste with blue acrylic paint mixed with white. Let the art dry. Finish with a spray varnish

tip If you don’t want to use all of the stencil pattern, use masking tape to cover the pieces you don’t want to use.

Z2509 pgs 108-125.indd 125

125

4/15/09 7:09:44 PM

resources Check your local art supply retailer for these or similar supplies, or call the manufacturer directly to find a supplier near you. BLOCKHEADS PAPER ARTS

LAZERTRAN

www.blockheadstamps.com/ink_transfer.html Transfer Ink™

www.lazertran.com Lazertran products

DANIEL SMITH ARTISTS MATERIALS

LIQUITEX

www.danielsmith.com gum arabic, printmaking supplies

www.liquitex.com paint, art supplies, gels and mediums

DECALPAPER.COM

OFFICE SUPPLY STORES

www.decalpaper.com water slide decals

multipurpose transparency film, plastic sleeves, t-shirt transfers

DOVER PUBLICATIONS

PAPERARTS.COM

www.doverpublications.com copyright-free images

www.paperarts.com gampi/silk tissue

EZSCREENPRINT

PHARMACIES

www.ezscreenprint.com PhotoEZ film

wintergreen oil, cotton balls, gloves SCULPEY

GOLDEN ARTIST COLORS

www.goldenpaints.com paints, gels, polymer medium and Digital Ground

www.sculpey.com polymer clay YUPO WORLDWIDE

HARDWARE STORES

heat gun, caulk, sandpaper

www.yupo.com Yupo paper

INKAID

www.inkaid1.com inkAID JACQUARD PRODUCTS

www.jacquardproducts.com ExtravOrganza, cotton, silk sheets KRYLON

www.krylon.com Crystal Clear, workable fixative, Preserve It!

126

Z2509 pgs 126-128.indd 126

4/15/09 5:45:22 PM

index Archival quality, 8–9 Blender marker, 52–54 Brayer, rubber bands on, 84 Caulk. See Direct gel, gesso and caulk; Dry gel, gesso and caulk Contact paper, clear, 12–14 Copiers, 9 Crayons, Crayola Fabric 34–35 Crystal Clear, 55–57 Digital ground, 22–23 Direct gel, gesso and caulk, 15–16 Dry gel, gesso and caulk, 17–19 Exposure frame, 93–96 ExtravOrganza, 80–81, 123–125 Fabric homemade ink-jet, 38–40, 115–117 print on, 85 Fabric crayons, 34–35 Fixative. See Workable fixative Fusible web, 32–33 Gampi/silk tissue, 58–59 project for, 119–121 Gel medium, transparency with, 26–27 Gel skin, 21–22, 111–113, 119–121 Gelatin print, 82–83 Gesso. See Direct gel, gesso and caulk; Dry gel, gesso and caulk Ghost images, with contact paper or packing tape, 14 Glues, 11 Gum arabic, 60–63 Heat techniques, 31–49. See also entries for specific heat techniques Heat tool, 36–37 High archival quality, 9 Homemade ink-jet fabric, 38–40, 115–117

Images. See entries for specific types of images Ink-jet fabric, homemade, 38–40, 115–117 Ink-jet image glues and mediums for, 15–16, 22–23, 26–27 heat techniques for, 32–33 high-contrast black-and-white, PhotoEZ film for, 93–96 iron on sheets for, 41 solvent techniques with, 64–69, 72–73 transparency with water, 99–101 Iron-on sheets, 41–42 Ironing with fabric crayons, 35 with fusible web, 33 with homemade ink-jet fabric, 39 with plastic heat, 46 Jacquard cotton, 85–86 Lazertran with Polymer Medium, 64–66 Lazertran with Turpentine, 67–69, 111–113 Line drawing, 88 Liquid polymer skin, 43–44 project for, 123–125 Low archival quality, 8 Magazine image glues and mediums for, 12–14, 17–19, 20–21, 24–25, 28–29 heat techniques with, 43–44, 45–47, 48–49 solvents for, 52–54, 75–77 Materials, 9 Medium archival quality, 9 Mediums, 11–29. See also entries for specific medium techniques Metric conversion chart, 2

Plastic heat, 45–47, 119–121, 123–125 Plastic wrap. See Plastic heat Polymer clay, 48–49 Polymer medium, Lazertran with, 64–66 Preserve It! spray, 70–71 Printers, 9 Projects, 109–125 Resources, 126 Reverse monoprint, 87–89 Rusting, 91–92 Solar silkscreen, 93–96 Solvents, 51–77. See also entries for specific solvents Stencil, 97–98 Toner-based image glues and mediums for, 12–14, 17–19, 20–21, 24–25, 28–29 heat tool for, 36–37 high-contrast, 60–63 liquid polymer skin for, 43–44 solvents for, 52–54, 55–57, 75–77 Tools, 9 Transfer Ink, 72–73 Transparency with gel, 26–27 glued on, 28–29 with water, 99–101 Turpentine, Lazertran with, 67–69, 111–113 Water, transparency with, 99–101 Water slide decal, 102–103 Wintergreen oil, 75–77 Yupo skins, 105–107

Packing tape, clear, 12–14 Paint, 24–25 PhotoEZ film, 93–96

127

Z2509 pgs 126-128.indd 127

4/15/09 5:45:42 PM

EXPLORE THE CREATIVE POSSIBILITIES WITH THESE NORTH LIGHT BOOKS

BOOK + ART

INTERACTIVE ART WORKSHOP

Dorothy Simpson Krause

Kim Rae Nugent

In this in-depth look at the book itself as art, you’ll be guided through a wide variety of binding techniques and structure styles, topped off with plenty of inspiration for transforming books into works of art. You’ll see the form and function of a book in a new light, viewing it as a new form of creative expression.

Interactive Art Workshop guides you through 25 step-by-step projects featuring interactive elements, ranging from spinning wheels to pull tabs, flapping doors and more. Techniques for adding touch, smell and sound are also demonstrated. A gallery of inspirational art follows each tutorial.

ISBN-13: 978-1-60061-154-4 ISBN-10: 1-60061-154-0 paperback with flaps, 144 pages, Z2489

ISBN 13: 978-1-60061-080-6 ISBN 10: 1-60061-080-3 paperback, 128 pages, Z1928

EXHIBITION 36 Susan Tuttle Inside Exhibition 36, you’ll enter a virtual gallery featuring the work of thirty-six mixed-media artists. Wander through the virtual exhibits and take inspiration from collage, digital art, assemblage, and altered and repurposed artwork. As a bonus, you’ll find imagery contributed by the artists for you to use in your own creations. ISBN-13: 978-1-60061-104-9 ISBN-10: 1-60061-104-4 paperback, 144 pages, Z2065

DISCOVER IMAGINATION, INNOVATION AND INSPIRATION AT WWW.MYCRAFTIVITY.COM AND WWW.MYCRAFTIVITYSHOP.COM

Z2509 pgs 126-128.indd 128

4/15/09 5:45:53 PM

CRAFTS

No Fear

Transfers

rienced If you have never tried image transfers or have expe image transfer mishaps, then Image Transfer ep Workshop is for you. This book presents step-by-st techniques for 35 image transfer processes, extensive bine tips for fixing mishaps and examples of how to com transfers in finished pieces of mixed-media art.

THIS COMPREHENSIVE GUIDE FEATURES 35 TECHNIQUES This book focuses exclusively on making transfers—from simple tape and gel medium transfers to more complex and out of the box techniques, like solar silk screens and plastic wrap transfers.

Let Image Transfer Workshop help build your image transfer confidence.

Join the community Authors Darlene Olivia McElroy and Sandra Duran Wilson invite you to learn more and share your image transfer stories, art and

TROUBLESHOOTING Image Transfer Workshop includes extensive answers to help fix problems in transfers gone wrong. You’ll learn what to watch for what to do to get great transfers every time. DUAL STYLES, DUAL APPROACHES The authors’ different styles illustrate how transfer techniques can take on completely different looks. Finished pieces of art for each technique and a section of completely stepped-out projects are sure to inspire you!

inspiration at

imagetransferworkshop.com

Z2509

US $24.99 (CAN $29.99)

ISBN-13: 978-1-60061-160-5 ISBN-10: 1-60061-160-5

UPC

Discover imagination, innovation and inspiration at

Z2509 Image Transfer Workshop CM1 1

mycraftivity.com Create. Connect. Explore.

4/15/09 3:03:59 PM