Functional Genomics: Methods and Protocols [1 ed.] 9781588292919, 1-58829-291-6

As high-throughput methods become more available and routine, experimentalists and theoreticians must be prepared to tak

308 98 4MB

English Pages 260 [272] Year 2003

Report DMCA / Copyright

DOWNLOAD PDF FILE

Table of contents :
Front Matter....Pages i-xii
Back Matter....Pages 1-7
....Pages 9-29
Recommend Papers

Functional Genomics: Methods and Protocols [1 ed.]
 9781588292919, 1-58829-291-6

  • 0 0 0
  • Like this paper and download? You can publish your own PDF file online for free in a few minutes! Sign Up
File loading please wait...
Citation preview

Methods in Molecular Biology

TM

VOLUME 224

Functional Genomics Methods and Protocols Edited by

Michael J. Brownstein Arkady B. Khodursky

M E T H O D S I N M O L E C U L A R B I O L O G Y™

Functional Genomics Methods and Protocols

Edited by

Michael J. Brownstein Laboratory of Genetics, NIMH/NHGRI National Institutes of Health, Rockville, MD

and

Arkady B. Khodursky Department of Biochemistry, Molecular Biology and Biophysics University of Minnesota, St. Paul, MN

Humana Press

Totowa, New Jersey

© 2003 Humana Press Inc. 999 Riverview Drive, Suite 208 Totowa, New Jersey 07512 www.humanapress.com All rights reserved. No part of this book may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, microfilming, recording, or otherwise without written permission from the Publisher. Methods in Molecular Biology™ is a trademark of The Humana Press Inc. The content and opinions expressed in this book are the sole work of the authors and editors, who have warranted due diligence in the creation and issuance of their work. The publisher, editors, and authors are not responsible for errors or omissions or for any consequences arising from the information or opinions presented in this book and make no warranty, express or implied, with respect to its contents. This publication is printed on acid-free paper. ∞ ANSI Z39.48-1984 (American Standards Institute) Permanence of Paper for Printed Library Materials. Cover illustration: 6000-element whole-genome Escherichia coli DNA microarray. Image has been manipulated to appear as the cover background. Image courtesy of Arkady Khodursky. Cover design by Patricia F. Cleary. For additional copies, pricing for bulk purchases, and/or information about other Humana titles, contact Humana at the above address or at any of the following numbers: Tel.: 973-256-1699; Fax: 973-256-8341; E-mail: [email protected]; or visit our Website: www.humanapress.com Photocopy Authorization Policy: Authorization to photocopy items for internal or personal use, or the internal or personal use of specific clients, is granted by Humana Press Inc., provided that the base fee of US $10.00 per copy, plus US $00.25 per page, is paid directly to the Copyright Clearance Center at 222 Rosewood Drive, Danvers, MA 01923. For those organizations that have been granted a photocopy license from the CCC, a separate system of payment has been arranged and is acceptable to Humana Press Inc. The fee code for users of the Transactional Reporting Service is: [1-58829-2916 $10.00 + $00.25]. Printed in the United States of America. 10 9 8 7 6 5 4 3 2 1 Library of Congress Cataloging in Publication Data Functional genomics: methods and protocols / edited by Michael J. Brownstein and Arkady B. Khodursky. p. cm.—(Methods in molecular biology ; v. 224) Includes bibliographical references and index. ISBN 1-58829-291-6 (alk. paper) eISBN 1-59259-364-X 1. DNA microarrays–Laboratory manuals. 2. Genomics–Laboratory manuals. 3. Proteomics–Laboratory manuals. I. Brownstein, Michael J. II. Khodursky, Arkady B. III. Methods in molecular biology (Totowa, NJ) ; v. 224 QP624.5.D726F86 2003 572.8’636–dc21 2003040707

Preface Dramatic technological advances have marked every quantum leap in our understanding of biological systems. Advances in manipulating and sequencing DNA triggered the last such leap. More than 20 years ago this technology began finding its way into biology laboratories, and multiple landmark discoveries have followed, including the sequencing of the genomes of several prokaryotic and eukaryotic species. This, in turn, spawned a new interest in bioinformatics, structural biology, and high-throughput methods that would allow scientists to look at the response of the entire genome to physiological, pharmacological, and pathological changes. Whether this transition was driven by exhaustion of the existing hypothesis pool, a subconscious adoption of the old “new paradigm” of biological complexity, or an instinctual urge among biologists to look for new and interesting phenomena is not really important. What is important is that high-throughput methods are becoming more and more routine and available, and experimentalists and theoreticians must be prepared to take advantage of them. Spotted DNA microarrays fall into this category. They power functional genomics, a nascent research field dealing with the structure and activity of genomes and global relationships between genotype and phenotype. The birth of the field can be traced back to three seminal papers (2,3,12). These three works grew from the realization that by placing individual sequence elements on a solid surface one can probe by hybridization a nearly unlimited number of targets simultaneously. Since then, similar ad infinitum approaches have been used to monitor relative protein levels (6), protein functions (15), cellular activities (16), and molecular interactions (10). These breakthrough studies will set the stage for the development of the fields of functional proteomics, metabolomics, etc. However, at the moment only functional genomic techniques on solid surfaces enjoy relatively wide acceptance because they are based on sounder physical-chemical principles. The long-term impact of functional genomics will depend on multiple factors— standardization and simplification of the protocols used, robust error assessment, streamlining of the analytical techniques, the sustainability of cost. The goal of the volume is to familiarize its readers with available, reproducible protocols in the field, and to attempt to introduce an audience of biologists to data processing techniques that will become critically important as we start dealing with increasing quantities of information. The “Methods” are divided in two sections: (i) Methods in Data Generation and (ii) Methods in Data Analysis. The first section focuses on bench techniques that have been

v

vi

Preface

developed and are being routinely used in several hard-core genomics laboratories. Besides general applicability of the techniques, the articles represented in the first section were selected on the basis of one major criterion: that they give sufficiently robust protocols to be adopted without modification by workers who have just begun their journeys in the field of genomics. The section opens with articles describing ways to manufacture and use spotted microarrays on three different solid surfaces: glass, plastic, and nylon membranes. Arrays manufactured on glass surfaces are usually interrogated with fluorescent nucleic acid probes, and Chapter 4 describes an optimized RNA labeling procedure that is applicable to the known spectrum of RNA sources. This chapter is followed by articles dealing with issues and protocols that are common to the field of bacterial functional genomics. The last two years’ work in the field of functional genomics was marked by development of specialized applications that have added to its depth. In this period there were techniques introduced that allow one to monitor subcellular RNA localization in masse (4,9,14), to map chromosomes at the resolution of a single gene (8,13), and to survey the steady-state genome-wide distribution of DNA binding proteins in vivo (5,7,11). Chapters 6–8 deal primarily with the methodologies behind these advances; Chapter 7 also provides a link between expression profiling and determination of gene copy number using whole-genome DNA microarrays. The issues of inference, experimental design, and reproducibility are of the paramount importance to researchers who deal with massive data sets. The second section of the “Methods” volume focuses on experimental design, data analysis, data display techniques, and bioinformatics. The section opens with a comprehensive overview of the inferential issues in microarray data analysis. The next four articles (Chapters 10–13) address in sequential manner some of the issues outlined in the overview article (9): design of microarray experiments (10); choice of the test statistic and assessment of the significance of observations (11); data reduction (12), and clustering, the most popular technique for microarray data classification (13). Accelerating and making the most of functional genomics studies are impossible without visualization and data storage, both of which—like the remaining methods in the field—are still in their infancy. These problems cannot be overlooked, however, because they allow genomics researchers and their colleagues in the scientific community to examine and mine experimental results. Two articles (14 and 15) describe some available approaches to the data visualization and database related issues. There are several things that were not reflected in any of the featured articles but are nevertheless worth noting. Spotted DNA microarrays are currently being used mainly for two purposes: 1. screening and 2. modeling. Truly successful application of microarrays in these two areas depends, albeit to different degrees, on technology standardization as well as the free, unimpeded flow

Preface

vii

of experimental data. Although we believe that methods will become fairly standard in the near future, a good deal of useful and valuable information will be lost in the short run owing to the lack of enforceable standards and controlled vocabularies for experimental annotation. The Minimum Information About a Microarray Experiment (MIAME) specifically addresses this issue (1), and should be read by anyone who wants to engage in expression profiling. The “methods” we have compiled do not provide advice about or comparisons of the available spotting platforms, image extraction and analysis algorithms, data storage and retrieval devices, and data analysis compendia. Although the available options range from simple, relatively affordable solutions to high-end, sometimes extremely expensive, commercial ones, we believe that information accumulated in the field is not yet sufficient and/or systematic enough to provide comprehensive comparisons of individual solutions and/or specific recommendations. In the course of preparing this volume we surveyed available microarray web resources. We encourage readers interested in developments in the field to keep an eye on the following sites: http://www.microarrays.org http://derisilab.ucsf.edu/ http://www.mged.org/Workgroups/MIAME/miame.html http://www.bioconductor.org/ http://ihome.cuhk.edu.hk/~b400559 Michael J. Brownstein Arkady B. Khodursky References 1. Brazma, A., P. Hingamp, Quackenbush, J., et al. (2001) Minimum information about a microarray experiment (MIAME)–toward standards for microarray data. Nat. Genet. 29, 365–371. 2. Chuang, S. E., Daniels, D. L., and Blattner, F. R. (1993) Global regulation of gene expression in Escherichia coli. J. Bacteriol. 175, 2026–2036. 3. DeRisi, J. L., Iyer, V. R., and Brown, P. O. (1997) Exploring the metabolic and genetic control of gene expression on a genomic scale. Science 278, 680–686. 4. Diehn, M., Eisen, M. B., Botstein, D., and Brown, P. O. (2000) Large-scale identification of secreted and membrane-associated gene products using DNA microarrays. Nat. Genet. 25, 58–62. 5. Gerton, J. L., DeRisi, J., Shroff, R., Lichten, M., Brown, P. O., and Petes, T. D. (2000) Inaugural article: global mapping of meiotic recombination hotspots and coldspots in the yeast Saccharomyces cerevisiae. Proc. Natl. Acad. Sci. USA 97, 11383–11390.

viii

Preface

6. Haab, B. B., Dunham, M. J., and Brown, P. O. (2001) Protein microarrays for highly parallel detection and quantitation of specific proteins and antibodies in complex solutions. Genome Biol. 2, RESEARCH0004. 7. Iyer, V. R., Horak, C. E., Scafe, C. S., Botstein, D., Snyder, M., and Brown, P. O. (2001) Genomic binding sites of the yeast cell-cycle transcription factors SBF and MBF. Nature 409, 533–538. 8. Khodursky, A. B., Peter, B. J., Schmid, M. B., et al. (2000) Analysis of topoisomerase function in bacterial replication fork movement: use of DNA microarrays. Proc. Natl. Acad. Sci. USA 97, 9419–9424. 9. Kuhn, K. M., DeRisi, J. L., Brown, P. O., and Sarnow, P. (2001) Global and specific translational regulation in the genomic response of Saccharomyces cerevisiae to a rapid transfer from a fermentable to a nonfermentable carbon source. Mol. Cell Biol. 21, 916–927. 10. Kuruvilla, F. G., Shamji, A. F., Sternson, S. M., Hergenrother, P. J., and Schreiber, S. L. (2002) Dissecting glucose signalling with diversity-oriented synthesis and small-molecule microarrays. Nature 416, 653–657. 11. Lieb, J. D., Liu, X., Botstein, D., and Brown, P. O. (2001) Promoter-specific binding of Rap1 revealed by genome-wide maps of protein-DNA association. Nat. Genet. 28, 327–334. 12. Nelson, S. F., McCusker, J. H., Sander, M. A., Kee, Y., Modrich, P., and Brown, P. O. (1993) Genomic mismatch scanning: a new approach to genetic linkage mapping. Nat. Genet. 4, 11–18. 13. Pollack, J. R., Perou, C. M., Alizadeh, A. A., et al. (1999) Genome-wide analysis of DNA copy-number changes using cDNA microarrays. Nat. Genet. 23, 41–46. 14. Takizawa, P. A., DeRisi, J. L., Wilhelm, J. E., and Vale, R. D. (2000) Plasma membrane compartmentalization in yeast by messenger RNA transport and a septin diffusion barrier. Science 290, 341–344. 15. Zhu, H., Klemic, J. F., Chang, S., et al. (2000) Analysis of yeast protein kinases using protein chips. Nat. Genet. 26, 283–289. 16. Ziauddin, J. and Sabatini, D. M. (2001) Microarrays of cells expressing defined cDNAs. Nature 411, 107–110.

Contents Preface ............................................................................................................. v Contributors ..................................................................................................... xi 1 Fabrication of cDNA Microarrays Charlie C. Xiang and Michael J. Brownstein ...................................... 1 2 Nylon cDNA Expression Arrays George Jokhadze, Stephen Chen, Claire Granger, and Alex Chenchik ............................................................................ 9 3 Plastic Microarrays: A Novel Array Support Combining the Benefits of Macro- and Microarrays Alexander Munishkin, Konrad Faulstich, Vissarion Aivazachvili, Claire Granger, and Alex Chenchik ..... 31 4 Preparing Fluorescent Probes for Microarray Studies Charlie C. Xiang and Michael J. Brownstein .................................... 55 5 Escherichia coli Spotted Double-Strand DNA Microarrays: RNA Extraction, Labeling, Hybridization, Quality Control, and Data Management Arkady B. Khodursky, Jonathan A. Bernstein, Brian J. Peter, Virgil Rhodius, Volker F. Wendisch, and Daniel P. Zimmer ...... 61 6 Isolation of Polysomal RNA for Microarray Analysis Yoav Arava ............................................................................................ 79 7 Parallel Analysis of Gene Copy Number and Expression Using cDNA Microarrays Jonathan R. Pollack ............................................................................ 89 8 Genome-wide Mapping of Protein–DNA Interactions by Chromatin Immunoprecipitation and DNA Microarray Hybridization Jason D. Lieb ........................................................................................ 99 9 Statistical Issues in cDNA Microarray Data Analysis Gordon K. Smyth, Yee Hwa Yang, and Terry Speed ..................... 111 10 Experimental Design to Make the Most of Microarray Studies M. Kathleen Kerr ................................................................................ 137

ix

x

Contents

11 Statistical Methods for Identifying Differentially Expressed Genes in DNA Microarrays John D. Storey and Robert Tibshirani ............................................ 149 12 Detecting Stable Clusters Using Principal Component Analysis Asa Ben-Hur and Isabelle Guyon .................................................... 159 13 Clustering in Life Sciences Ying Zhao and George Karypis ........................................................ 183 14 A Primer on the Visualization of Microarray Data Paul Fawcett ....................................................................................... 219 15 Microarray Databases: Storage and Retrieval of Microarray Data Gavin Sherlock and Catherine A. Ball ............................................ 235 Index ............................................................................................................ 249

Contributors VISSARION AIVAZACHVILI • BD Biosciences Clontech, Palo Alto, CA YOAV ARAVA • Department of Biochemistry, Stanford University School of Medicine, Palo Alto, CA CATHERINE A. BALL • Department of Genetics, Stanford University School of Medicine, Palo Alto, CA ASA BEN-HUR • Department of Biochemistry, Stanford University School of Medicine, Palo Alto, CA JONATHAN A. BERNSTEIN • Department of Genetics, Stanford University School of Medicine, Palo Alto, CA MICHAEL J. BROWNSTEIN • Laboratory of Genetics, NIMH/NHGRI, National Institutes of Health, Rockville, MD STEPHEN CHEN • BD Biosciences Clontech, Palo Alto, CA ALEX CHENCHIK • BD Biosciences Clontech, Palo Alto, CA KONRAD FAULSTICH • BD Biosciences Clontech, Palo Alto, CA PAUL FAWCETT • Department of Biochemistry, Stanford University School of Medicine, Palo, CA CLAIRE GRANGER • BD Biosciences Clontech, Palo Alto, CA ISABELLE GUYON • Clopinet, Berkeley, CA GEORGE JOKHADZE • BD Biosciences Clontech, Palo Alto, CA GEORGE KARYPIS • Department of Computer Science, University of Minnesota, Minneapolis, MN M. KATHLEEN KERR • Department of Biostatistics, University of Washington, Seattle, WA ARKADY B. KHODURSKY • Department of Biochemistry, Biophysics and Molecular Biology, University of Minnesota, St. Paul, MN JASON D. LIEB • Department of Biology and Carolina Center for Genome Sciences, The University of North Carolina at Chapel Hill, Chapel Hill, NC ALEXANDER MUNISHKIN • BD Biosciences Clontech, Palo Alto, CA BRIAN J. PETER • MRC Laboratory of Molecular Biology, Cambridge, UK JONATHAN R. POLLACK • Department of Pathology, Stanford University School of Medicine, Palo Alto, CA VIRGIL RHODIUS • Department of Stomatology, University of California, San Francisco, San Francisco, CA

xi

xii

Contributors

GAVIN SHERLOCK • Department of Genetics, Stanford University School of Medicine, Palo Alto, CA GORDON K. SMYTH • Walter and Eliza Hall Institute of Medical Research, Melbourne, Australia TERRY SPEED • Walter and Eliza Hall Institute of Medical Research, Melbourne, Australia; and Department of Statistics, University of California–Berkeley, Berkeley, CA JOHN D. STOREY • Department of Statistics, Stanford University, Palo Alto, CA ROBERT TIBSHIRANI • Department of Health Research & Policy and Department of Statistics, Stanford University, Palo Alto, CA VOLKER F. WENDISCH • Institute of Biotechnology, Juelich, Germany CHARLIE C. XIANG • Laboratory of Genetics, NIMH/NHGRI, National Institutes of Health, Rockville, MD YEE HWA YANG • Division of Biostatistics, University of California, San Francisco, CA YING ZHAO • Department of Computer Science, University of Minnesota, Minneapolis, MN DANIEL P. ZIMMER • Microbia Inc., Cambridge, MA

Fabrication of cDNA Microarrays

1

1 Fabrication of cDNA Microarrays Charlie C. Xiang and Michael J. Brownstein 1. Introduction DNA microarray technology has been used successfully to detect the expression of many thousands of genes, to detect DNA polymorphisms, and to map genomic DNA clones (1–4). It permits quantitative analysis of RNAs transcribed from both known and unknown genes and allows one to compare gene expression patterns in normal and pathological cells and tissues (5,6). DNA microarrays are created using a robot to spot cDNA or oligonucleotide samples on a solid substrate, usually a glass microscope slide, at high densities. The sizes of spots printed in different laboratories range from 75 to 150 µm in diameter. The spacing between spots on an array is usually 100–200 µm. Microarrays with as many as 50,000 spots can be easily fabricated on standard 25 mm × 75 mm glass microscope slides. Two types of spotted DNA microarrays are in common use: cDNA and synthetic oligonucleotide arrays (7,8). The surface onto which the DNA is spotted is critically important. The ideal surface immobilizes the target DNAs, and is compatible with stringent probe hybridization and wash conditions (9). Glass has many advantages as such a support. DNA can be covalently attached to treated glass surfaces, and glass is durable enough to tolerate exposure to elevated temperatures and high-ionic-strength solutions. In addition, it is nonporous, so hybridization volumes can be kept to a minimum, enhancing the kinetics of annealing probes to targets. Finally, glass allows probes labeled with two or more fluors to be used, unlike nylon membranes, which are typically probed with one radiolabeled probe at a time.

From: Methods in Molecular Biology: vol. 224: Functional Genomics: Methods and Protocols Edited by: M. J. Brownstein and A. Khodursky © Humana Press Inc., Totowa, NJ

1

2

Xiang and Brownstein

2. Materials 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.

Multiscreen filtration plates (Millipore, Bedford, MA). Qiagen QIAprep 96 Turbo Miniprep kit (Qiagen, Valencia, CA). dATP, dGTP, dCTP, and dTTP (Amersham Pharmacia, Piscataway, NJ). M13F and M13R primers (Operon, Alameda, CA). Taq DNA polymerase and buffer (Invitrogen, Carlsbad, CA). PCR CyclePlate (Robbins, Sunnyvale, CA). CycleSeal polymerase chain reaction (PCR) plate sealer (Robbins). Gold Seal microscope slides (Becton Dickinson, Franklin, NJ). 384-well plates (Genetix, Boston, MA). Succinic anhydride (Sigma, St. Louis, MO) in 325 mL of 1-methy-2-pyrrolidinone (Sigma).

3. Methods 3.1. Selection and Preparation of cDNA Clones 3.1.1. Selection of Clones

Microarrays are usually made with DNA fragments that have been amplified by PCR from plasmid samples or directly from chromosomal DNA. The sizes of the PCR products on our arrays range from 0.5 to 2 kb. They attach well to the glass surface. The amount of DNA deposited per spot depends on the pins chosen for printing, but elements with 250 pg to 1 ng of DNA (up to 9 × 108 molecules) give ample signals. Many of the cDNA clones that have been arrayed by laboratories in the public domain have come from the Integrated Molecular Analysis of Genomes and Expression (IMAGE) Consortium set. Five million human IMAGE clones have been collected and are available from Invitrogen/Research Genetics (www.resgen.com/products/IMAGEClones.php3). Sequence-verified cDNA clones from humans, mice, and rats are also available from Invitrogen/Research Genetics. cDNA clones can also be obtained from other sources. The 15,000 National Institute of Aging (NIA) mouse cDNA set has been distributed to many academic centers (http://lgsun.grc.nia.nih.gov/cDNA/15k/hsc.html). Other mouse cDNA collections include the Brain Molecular Anatomy Project (BMAP) (http://brainest.eng.uiowa.edu), and RIKEN (http://genome.rtc.riken.go.jp) clone sets. In preparing our arrays, we have used the NIA and BMAP collections and are in the process of sequencing the 5v ends of the 41,000 clones in the combined set in collaboration with scientists at the Korea Research Institute of Bioscience and Biotechnology. Note that most cDNA collections suffer from some gridding errors and well-to-well cross contamination.

Fabrication of cDNA Microarrays

3

3.1.2. Preparation of Clones

Preparing DNA for spotting involves making plasmid minipreps, amplifying their inserts, and cleaning up the PCR products. Most IMAGE clones are in standard cloning vectors, and the inserts can be amplified with modified M13 primers. The sequences of the forward (M13F) and reverse (M13R) primers used are 5v-GTTGTAAAACGACGGCCAGTG-3v and 5v-CACACAGGAAA CAGCTATG-3v, respectively. A variety of methods are available for purifying cDNA samples. We use QIAprep 96 Turbo Miniprep kits and a Qiagen BioRobot 8000 (Qiagen) for plasmid isolations but cheaper, semiautomated techniques can be used as well. We PCR DNAs with a Tetrad MultiCycler (MJ Research, Incline Village, NV) and purify the products with Multiscreen filtration plates (Millipore). 3.1.3. Purification of Plasmid 1. Culture the bacterial clones overnight in 1.3 mL of Luria–Bertani (LB) medium containing 100 µg/mL of carbenicillin at 37°C, shaking them at 300 rpm in 96-well flat-bottomed blocks. 2. Harvest the bacteria by centrifuging the blocks for 5 min at 1500g in an Eppendorf centrifuge 5810R (Eppendorf, Westbury, NY). Remove the LB by inverting the block. The cell pellets can be stored at –20°C. 3. Prepare cDNA using the BioRobot 8000, or follow the Qiagen QIAprep 96 Turbo Miniprep kit protocol for manual extraction. 4. Elute the DNA with 100 µL of Buffer EB (10 mM Tris-HCl, pH 8.5) included in the QIAprep 96 Turbo Miniprep kit. The plasmid DNA yield should be 5–10 µg per prep.

3.1.4. PCR Amplification 1. Dilute the plasmid solution 1⬊10 with 1X TE (10 mM Tris-HCl, pH 8.0, 1 mM EDTA). 2. For each 96-well plate to be amplified, prepare a PCR reaction mixture containing the following ingredients: 1000 µL of 10X PCR buffer (Invitrogen), 20 µL each of dATP, dGTP, dCTP, and dTTP (100 mM each; Amersham Pharmacia), 5 µL each of M13F and M13R (1 mM each; Operon), 100 µL of Taq DNA polymerase (5 U/µL; Invitrogen), and 8800 µL of ddH2O. 3. Add 100 µL of PCR reaction mix to each well of a PCR CyclePlate (Robbins) plus 5 µL of diluted plasmid template. Seal the wells with CycleSeal PCR plate sealer (Robbins). (Prepare two plates for amplification from each original source plate to give a final volume of 200 µL of each product.) 4. Use the following PCR conditions: 96°C for 2 min; 30 cycles at 94°C for 30 s, 55°C for 30 s, 72°C for 1 min 30 s; 72°C for 5 min; and cool to ambient temperature.

4

Xiang and Brownstein 5. Analyze 2 µL of each product on 2% agarose gels. We use an Owl Millipede A6 gel system (Portsmouth, NH) with eight 50-tooth combs. This allows us to run 384 samples per gel.

3.1.5. Cleanup of PCR Product 1. Transfer the PCR products from the two duplicate PCR CyclePates to one Millipore Multiscreen PCR plate using the Qiagen BioRobot 8000. 2. Place the Multiscreen plate on a vacuum manifold. Apply the vacuum to dry the plate. 3. Add 100 µL of ddH2O to each well. 4. Shake the plate for 30 min at 300 rpm. 5. Transfer the purified PCR products to a 96-well plate. 6. Store the PCR products in a –20°C freezer.

3.2. Creating cDNA Microarrays (see Note 1) Robots are routinely used to apply DNA samples to glass microscope slides. The slides are treated with poly-L-lysine or other chemical coatings. Some investigators irradiate the printed arrays with UV light. Slides coated with poly-L-lysine have a positively charged surface, however, and the negatively charged DNA molecules bind quite tightly without crosslinking. Finally, the hydrophobic character of the glass surface minimizes spreading of the printed spots. Poly-L-lysine-coated slides are inexpensive to make, and we have found that they work quite well. About 1 nL of PCR product is spotted per element. Many printers are commercially available. Alternatively, one can be built in-house (for detailed instructions, visit http://cmgm.stanford.edu/pbrown/mguide/index.html). After the arrays are printed, residual amines are blocked with succinic anhydride (see http://cmgm.stanford.edu/pbrown/mguide/index.html). 3.2.1. Coating Slides with Poly-L-lysine 1. Prepare cleaning solution by dissolving 100 g of NaOH in 400 mL of ddH2O. Add 600 mL of absolute ethanol and stir until the solution clears. 2. Place Gold Seal microscope slides (Becton Dickinson) into 30 stainless-steel slide racks (Wheaton, Millville, NJ). Place the racks in a glass tank with 500 mL of cleaning solution. Work with four racks (120 slides in total) at a time. 3. Shake at 60 rpm for 2 h. 4. Wash with ddH2O four times, 3 min for each wash. 5. Make a poly-L-lysine solution by mixing 80 mL of 0.1% (w/v) poly-L-lysine with 80 mL of phosphate-buffered saline and 640 mL of ddH2O. 6. Transfer two racks into one plastic tray with 400 mL of coating solution. 7. Shake at 60 rpm for 1 h.

Fabrication of cDNA Microarrays

5

8. Rinse the slides three times with ddH2O. 9. Dry the slides by placing them in racks (Shandon Lipshaw, Pittsburgh, PA) and spinning them at 130g for 5 min in a Sorvall Super T21 centrifuge with an ST-H750 swinging bucket rotor. Place one slide rack in each bucket. 10. Store the slides in plastic storage boxes and age them for 2 wk before printing DNA on them.

3.2.2. Spotting DNA on Coated Slides

We use the following parameters to print 11,136 element arrays with an OmniGrid robot having a Server Arm (GeneMachines, San Carlos, CA): 4 × 4 SMP3 pins (TeleChem, Sunnyvale, CA), 160 × 160 µM spacing, 27 × 26 spots in each subarray, single dot per sample. We use the following printing parameters: velocity of 13.75 cm/s, acceleration of 20 cm/s2, deceleration of 20 cm/s2. We print two identical arrays on each slide. 1. Adjust the relative humidity of the arrayer chamber to 45–55% and the temperature to 22°C. 2. Dilute the purified PCR products 1⬊1 with dimethylsulfoxide (DMSO) (Sigma) (see Note 2). Transfer 10-µL aliquots of the samples to Genetix 384-well plates (Genetix). 3. Load the plates into the cassette of the Server Arm. Three such cassettes hold 36 plates. Reload the cassettes in midrun if more than 36 plates of samples are to be printed. It takes about 24 h to print 100 slides with 2 × 11,136 elements on them. 4. Label the slides. Examine the first slide in the series under a microscope. Mark the four corners of the array (or the separate arrays if there are more than one on the slide) with a scribe. Use this indexed slide to draw a template on a second microscope slide showing where the cover slip should be placed during the hybridization step. Remove the remaining slides from the arrayer and store them in a plastic box.

3.2.3. Postprocessing

We often postprocess our arrays after storing them for several days. This may not be necessary as others have argued, but it is sometimes convenient. Many workers recommend UV crosslinking the DNA to the slide surface by exposing the arrays to 450 mJ of UV irradiation in a Stratalinker (Stratagene, La Jolla, CA). As noted, this step is optional, and we have not found it to be critical. 1. Insert 30 slides into a stainless steel rack and place each rack in a small glass tank. 2. In a chemical fume hood, dissolve 6 g of succinic anhydride (Sigma) in 325 mL of 1-methy-2-pyrrolidinone (Sigma) in a glass beaker by stirring.

6

Xiang and Brownstein

3. Add 25 mL of 1 M sodium borate buffer (pH 8.0) to the beaker as soon as the succinic anhydride is dissolved. 4. Rapidly pour the solution into the glass tank. 5. Place the glass tank on a platform shaker and shake at 60 rpm for 20 min in the hood. While the slides are incubating on the shaker, prepare a boiling water bath. 6. Transfer the slides to a container with 0.1% sodium dodecyl sulfate solution. Shake at 60 rpm for 3 min. 7. Wash the slides with ddH2O for 2 min. Repeat the wash two more times. 8. Place the slides in the boiling water bath. Turn off the heat immediately after submerging the slides in the water. Denature the DNA for 2 min in the water bath. 9. Transfer the slides to a container with 100% ethanol and incubate for 4 min. 10. Dry the slides in a centrifuge at 130g for 5 min (see Subheading 3.2.1., step 9) and store them in a clean plastic box. The slides are now ready to be probed (see Note 3).

4. Notes 1. The methods for printing slides described in this chapter are somewhat tedious, but they are robust and inexpensive. 2. We recommend dissolving the DNAs to be printed in 50% DMSO instead of aqueous buffers because this is a simple solution to the problem of sample evaporation during long printing runs (10). 3. The probe-labeling technique that we describe in Chapter 4 works well with slides prepared according to the protocols we have given.

References 1. Schena, M., Shalon, D., Davis, R. W., and Brown, P. O. (1995) Quantitative monitoring of gene expression patterns with a complementary DNA microarray. Science 270, 467–470. 2. Schena, M., Shalon, D., Heller, R., Chai, A., Brown, P. O., and Davis, R. W. (1996) Parallel human genome analysis: microarray-based expression monitoring of 1000 genes. Proc. Natl. Acad. Sci. USA 93, 10,614–10,619. 3. DeRisi, J., Vishwanath, R. L., and Brown, P. O. (1997) Exploring the metabolic and genetic control of gene expression on a genomic scale. Science 278, 680–686. 4. Sapolsky, R. J. and Lipshutz, R. J. (1996) Mapping genomic library clones using oligonucleotide arrays. Genomics 33, 445–456. 5. DeRisi, J., Penland, L., Brown, P. O., Bittner, M. L., Meltzer, P. S., Ray, M., Chen, Y., Su, Y. A., and Trent, J. M. (1996) Use of a cDNA microarray to analyse gene expression patterns in human cancer. Nat. Genet. 14, 457–460. 6. Heller, R. A., Schena, M., Chai, A., Shalon, D., Bedilion, T., Gilmore, J., Woolley, D. E., and Davis, R. W. (1997) Discovery and analysis of inflammatory disease-related genes using cDNA microarrary. Proc. Natl. Acad. Sci. USA 94, 2150–2155.

Fabrication of cDNA Microarrays

7

7. Shalon, D., Smith, S. J., and Brown, P. O. (1996) A DNA microarray system for analyzing complex DNA samples using two-color fluorescent probe hybridization. Genome Res. 6, 639–645. 8. Lipshutz, R. J., Fodor, S. P. A., Gingeras, T. R., and Lockhart, D. J. (1999). High density synthetic oligonucleotide arrays. Nat. Genet. 21(Suppl.), 20–24. 9. Cheung, V. G., Morley, M., Aguilar, F., Massimi, A., Kucherlapati, R., and Childs, G. (1999) Making and reading microarrays. Nat. Genet. 21(Suppl.), 15–19. 10. Hegde, P., Qi, R., Abernathy, K., Gay, C., Dharap, S., Gaspard, R., Hughes, J. E., Snesrud, E., Lee, N., and Quackenbush, J. (2000) A concise guide to cDNA microarray analysis. Biotechniques 29, 548–556.

Nylon cDNA Expression Arrays

9

2 Nylon cDNA Expression Arrays George Jokhadze, Stephen Chen, Claire Granger, and Alex Chenchik 1. Introduction Nucleic acid arrays provide a powerful methodology for studying biological systems on a genomic scale. BD Atlas™ Arrays, developed by BD Biosciences Clontech, are expression profiling products specifically designed to be accessible to all laboratories performing isotopic blot hybridization experiments. We have developed two types of readily accessible BD Atlas Arrays: nylon macroarrays, well suited for high-sensitivity expression profiling using a limited gene set, and broad-coverage plastic microarrays, for a more extensive analysis of a comprehensive set of genes. In this chapter, we describe protocols for printing and performing gene expression analysis using nylon membrane–based arrays. For a more in-depth description and protocols related to plastic film–based arrays, please refer to Chapter 3. Nylon membrane–based arrays offer several advantages for researchers. Compared with glass arrays, nylon arrays are usually less expensive to produce and require less complicated equipment. Nylon arrays are generally considered more user friendly, since analysis involves only familiar hybridization techniques. Detection of results is also straightforward—probes are radioactively labeled, so one can simply use a standard phosphorimager. 1.1. Sensitivity of Nylon Arrays Nylon membranes are typically used to print low- (10–1000) to medium(1000–4000) density cDNA arrays. Unlike high-density arrays, which are usually printed on glass or plastic supports, probes for nylon arrays can be labeled with 32P, resulting in a much higher (>fourfold) level of sensitivity From: Methods in Molecular Biology: vol. 224: Functional Genomics: Methods and Protocols Edited by: M. J. Brownstein and A. Khodursky © Humana Press Inc., Totowa, NJ

9

10

Jokhadze et al.

Fig. 1. Nylon array hybridized with a 32P-labeled probe.

(Fig. 1). This means that the presence of even low-abundance transcripts can be detected. Nylon arrays are printed with fragments of cDNA clones (200–600 bp) representing individual genes. Each cDNA fragment is amplified from the original clone using gene-specific or universal primers, denatured, and printed onto the membranes. cDNA fragments have a significantly higher hybridization efficiency than oligos yet generally do not allow discrimination between highly homologous genes, such as multigene family members. For this reason, cDNA fragments are ideal for nylon arrays that represent a limited number of genes. In an array experiment, the cDNA fragments on the array are designated as the “targets.” The “probe” used to screen the array is a radioactively labeled pool of cDNAs, reverse transcribed from total or polyA+ RNA extracted from a particular tissue or cell type. Duplicate arrays are screened with cDNA probes prepared from two or more tissues, cell lines, or differentially treated samples. The single most important factor determining the success or failure of array experiments is the quality of the RNA used to make the probes. Poorquality RNA preparation leads to high background on the membrane and/or a misleading hybridization pattern. The present protocol allows purification of total RNA and labeling of probes for array hybridizations in one straightforward procedure—no separate poly A+ RNA purification step is needed. An acceptable

Nylon cDNA Expression Arrays

11

amount (10 µg) of high-quality total RNA can be isolated from as little as 10 mg of tissue or 105 cells. With nylon membrane arrays, there is a choice of using 32P or 33P in the labeling reaction. The more appropriate method depends on the printing density of the array (see Subheading 3.1.4.) and the nature of the experiment. For general purposes, we recommend using 32P because this isotope provides greater sensitivity. High sensitivity will be especially important if one is interested in any low-abundance transcripts. On the other hand, 33P offers the advantage of higher-resolution signal, meaning that the signal produced by a spot on the array will be more closely confined to the spot’s center, preventing signal “bleed” to neighboring spots. High signal bleed can complicate the interpretation of results for nearby genes. The 33P method is particularly useful if highly abundant transcripts are of interest or one plans to quantitatively analyze the results by phosphorimaging. However, 33P detection is generally only one-fourth as sensitive as 32P detection (1). When labeling array probes, choose the method that best suits your needs. 2. Materials Unless otherwise noted, all catalog numbers provided are for BD Biosciences Clontech products. 2.1. Nylon Membrane Array Printing 2.1.1. Nylon Membrane Printing Reagents 1. Nytran Plus Membrane, cut into 82 × 120 mm rectangles (Schleicher & Schuell). 2. BD TITANIUM™ Taq PCR Kit (cat. no. K1915-1). 3. Gene-specific or universal primers for amplifying cDNA fragments (see Subheading 3.1.). 4. Sequence-verified cDNA templates (vectors carrying clones with sequenceverified cDNA insert). 5. Milli-Q-filtered H2O. 6. Printing dye (30% Ficoll, 1% thymol blue). 7. 3 M NaOAc, pH 4.0. 8. Membrane neutralization solution (0.5 M Tris, pH 7.6).

2.1.2. Nylon Membrane Array Printing Equipment 1. Polymerase chain reaction (PCR) reaction tubes (0.5 mL). (We recommend Perkin-Elmer GeneAmp 0.5-mL reaction tubes (cat. no. N801-0737 or N801-0180). 2. PCR machine/thermal cycler. We use a hot-lid thermal cycler.

12

Jokhadze et al.

3. 384-well V-bottomed polystyrene plates (USA Scientific), for use as a source plate during printing. 4. SpeedVac. 5. Arrayer robot. We use a BioGrid Robot (BioRobotics). 6. UV Stratalinker crosslinker (Stratagene). 7. Pin tool (0.7 mm diameter, 384 pin). 8. Sarstedt Multiple Well Plate 96-Well (lids only), used to hold nylon membranes for printing. 9. Adhesive sealing film (THR100 Midwest Scientific). 10. NucleoSpin Multi-8 PCR Kit (cat. no. K3059-1) or NucleoSpin Multi-96 PCR Kit (cat. no. K3065-1).

2.2. Reagents for RNA Isolation and Probe Synthesis 2.2.1. Reagents Provided with BD Atlas Pure Total RNA Labeling System

The BD Atlas™ Pure Total RNA Labeling System (cat. no. K1038-1) is available exclusively from BD Biosciences Clontech. Do not use the protocol supplied with the BD Atlas Pure Kit. The procedures for RNA isolation and cDNA synthesis in the following protocol differ significantly from the procedures found in the BD Atlas Pure User Manual. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.

Denaturing solution. Saturation buffer for phenol. RNase-free H2O. 2 M NaOAc (pH 4.5). 10X termination mix. Streptavidin magnetic beads. 1X binding buffer. 2X binding buffer. 1X reaction buffer. 1X wash buffer DNase I (1 U/µL). DNase I buffer. Biotinylated oligo(dT). Moloney murine leukemia virus reverse transcriptase (MMLV RT).

2.2.2. Additional Reagents/Special Equipment 1. Saturated phenol (store at 4°C). For 160 mL: 100 g of phenol (Sigma cat. no. P1037 or Boehringer Mannheim cat. no. 100728). In a fume hood, heat a jar of phenol in a 70°C water bath for 30 min or until the phenol is completely melted. Add 95 mL of phenol directly to the saturation buffer (from the BD AtlasPure Kit), and mix well. Hydroxyquinoline may be added if desired. Aliquot and freeze at –20°C for long-term storage. This preparation of saturated phenol will only have one phase.

Nylon cDNA Expression Arrays

13

2. Tissue homogenizer (e.g., Polytron or equivalent). For 200 mg of tissue, use a 10-mm probe. 3. [_-32P]dATP (10 µCi/µL; 3000 Ci/mmol) (cat. no. PB10204; Amersham) or [_-33P]dATP (10 µCi/µL; >2500 Ci/mmol) (cat. no. BF1001; Amersham). Do not use Amersham’s Redivue or any other dye-containing isotope. 4. Deionized H2O (Milli-Q filtered or equivalent; do not use diethylpyrocarbonatetreated H2O). 5. Magnetic particle separator (cat. no. Z5331; Promega, Madison, WI). It is important that you use a separator designed for 0.5-mL tubes. 6. Polypropylene centrifuge tubes: 1.5-mL (cat. no. 72-690-051; Sarstedt), 2-mL (cat. no. 16-8105-75; PGC), 15-mL (tubes cat. no. 05-562-10D, caps cat. no. 05-562-11E; Fisher), and 50-mL (tubes with caps cat. no. 05-529-1D; Fisher). Fifteen- and 50-mL tubes should be sterilized with 1% sodium dodecyl sulfate (SDS) and ethanol before use. 7. 10X dNTP mix (for dATP label; 5 mM each of dCTP, dGTP, dTTP). 8. 10X Random primer mix (N-15) or gene-specific primer mix (see Subheading 3.4.3.). 9. BD PowerScript™ Reverse Transcriptase and 5X BD PowerScript™ Reaction Buffer (available exclusively from BD Biosciences Clontech; cat. no. 8460-1). 10. Dithiothreitol (DTT) (100 mM). 11. NucleoSpin® Extraction Kit: NucleoSpin extraction spin columns, 2-mL collection tubes, buffer NT2, buffer NT3 (add 95% ethanol before use as specified on the label), buffer NE.

2.3. Reagents for Hybridization, Washing, and Stripping of Nylon Arrays 1. BD ExpressHyb™ hybridization solution (cat. no. 8015-1). 2. Sheared salmon testes DNA (10 mg/mL) (cat. no. D7656; Sigma). 3. Optional: 10X Denaturing solution (1 M NaOH, 10 mM EDTA) (see Subheading 3.5.). 4. Optional: 2X Neutralizing solution (1 M NaH2PO4 [pH 7.0]): 27.6 g of NaH2PO4•H2O). Add 190 mL of H2O, adjust the pH to 7.0 with 10 N NaOH if necessary, and add H2O to 200 mL. Store at room temperature (see Subheading 3.5.). 5. Cot-1 DNA (1 mg/mL). 6. 20X saline sodium citrate (SSC), 175.3 g of NaCl, 88.2 g of Na3citrate•2H2O. Add 900 mL of H2O, adjust the pH to 7.0 with 1 M HCl if necessary, and add H2O to 1 L. Store at room temperature. 7. 20% SDS: 200 g of SDS. Add H2O to 1 L. Heat to 65°C to dissolve. Store at room temperature. 8. Wash solution 1: 2X SSC, 1% SDS. Store at room temperature. 9. Wash solution 2: 0.1X SSC, 0.5% SDS. Store at room temperature.

14

Jokhadze et al.

3. Methods 3.1. Printing of Nylon Membrane Arrays cDNA fragments to be used for printing can be amplified by using either gene-specific primers or a pair of “universal” primers (i.e., T3, T7, M13F, or M13R) complementary to sites in the cloning vector flanking the cDNA clone. One advantage of using gene-specific primers is that a specific region of the cDNA clone to be amplified can be chosen. For example, the amplification of cDNAs used to print BD Atlas Arrays is specially designed to minimize nonspecific hybridization. All cDNA fragments are 200–600 bp long and are amplified from a region of the mRNA that lacks the poly A tail, repetitive elements, or other highly homologous sequences. Another advantage of using gene-specific primers is that the antisense primers used in array preparation can be pooled and subsequently used as a gene-specific primer mix to synthesize cDNA probes from experimental samples. The use of gene-specific probes provides higher sensitivity and lower background than random primers (see Subheading 3.4.3. for details). 3.1.1. Preparative PCR for cDNA Fragments 1. Prepare a 100-µL PCR reaction in a 0.5-mL PCR tube for each cDNA to be represented on the array. Calculate the amount of each component required for the PCR reaction by referring to Table 1. Universal primers, appropriate for your cloning vector, may be used in place of gene-specific primers. Adjust the volumes accordingly. 2. Commence thermal cycling using the following parameters: 30–35 cycles of 94°C for 30 s and 68°C for 90 s, 68°C for 5 min, and 15°C soak. These conditions were developed for use with a hot-lid thermal cycler; the optimal parameters may vary with different thermal cyclers. (Note that these parameters were optimized for amplification of fragments approx 200–600 bp long.) 3. Run 5 µL of each pooled PCR product (plus loading dye) on a 2% TAE agarose gel, alongside a molecular weight marker, to screen the PCR products. 4. Check each PCR product size by comparison with the molecular weight markers. If the size of the PCR product is correct, add EDTA (final concentration of 0.1 M EDTA, pH 8.0) to the pooled PCR products to stop the reaction.

3.1.2. Purification of cDNA Fragments

To purify amplified cDNA fragments, we recommend that you use either the NucleoSpin Multi-8 PCR Kit (cat. no. K3059-1) or NucleoSpin Multi-96 PCR Kit (cat. no. K3065-1) and follow the enclosed protocol. NucleoSpin PCR kits are designed to purify PCR products from reaction mixtures with speed and efficiency. Primers, nucleotides, salts, and polymerases are effectively removed using these kits; up to 96 samples can be processed simultaneously in less than

Nylon cDNA Expression Arrays

15

Table 1 cDNA Fragment PCR Set-Up PCR master mix 10X BD TITANIUM Taq PCR buffer 10 µM dNTP mix Specific or universal primer mix, 20 µM each Template (0.5–1 ng/µL) 50X BD TITANIUM Taq Mix Milli-Q H2O

Final concentration 1X 200 µM 0.4 µM each 0.025–0.05 ng/µL 1X Bring volume up

Per 100-µL reaction (µL) 10 2 2 5 2 79

60 min. Up to 15 µg of high-quality DNA can be isolated per preparation. Recovery rates of 75–90% can be achieved for fragments from 100 bp to 10 kb. 3.1.3. Standardization of cDNAs 1. In a 1.5-mL microcentrifuge tube, dilute 5 µL of the purified cDNA fragment stock in 995 µL of H2O (a 1⬊200 dilution) and read the optical density of the dilution at 260 nm. Calculate the cDNA concentration in cDNA stock. Each PCR reaction should yield a total of 2 to 3 µg of DNA. 2. If the concentration of cDNA in the stock solution is >500 ng/µL, go to step 5; if 6. All genes past i1 are called significant positive. Similarly, start at the origin, move down to – the left, and find first i = i2 such that d (i) – d(i) > 6. All genes past i2 are called significant negative. For each 6 define the upper cut point t2 as the smallest di among the significant positive genes and similarly define the lower cut point t1.

In Fig. 2 we used 6 = 0.531, to yield the same number of genes (252) that we obtained using the cutoffs ±1.5. As Fig. 2 shows, the resulting cut points from SAM are asymmetric; they are –1.45 and 1.71. As a result, the number of genes called significant at the negative and positive ends is quite unequal—they are 167 and 85 (and they are 157 and 95 for the cut points ±1.5). The actual SAM procedure adds (the same) constant s0 to the denominator of each statistic di. The constant is chosen as the percentile of the si values that makes the coefficient of variation of di approximately constant as a function of si. Its effect is to dampen large values of di that arise from genes whose expression is near zero. Here, we set s0 equal to the median value of the si, 17.7. For consistency in this example, we used this value in the denominator of all t statistics for all methods. In the example in this section, SAM chose cut points t1 = –1.45 and t2 = 1.71 to produce 252 significant genes. The algorithm in the following section explains how to estimate the FDR for the gene list produced from the SAM cut points. It is the same procedure as described for the symmetric cut points. For concreteness we outline it in detail. 5.2. Estimation of FDR for SAM Procedure 1. Calculate the statistics d1, . . . , dm as outlined above. 2. Choose a set of cut points t1 and t2 based on some method, such as SAM. 3. Let t 01 and t 02 be two additionally chosen cut points so that the statistics between t 01 and t 02 are mostly null. (This choice is fully automated in the SAM software based on ref. 5.) b b b 4. Using B null versions of statistics d *1 , d *2 , . . . , d *m for b = 1, . . . , B estimate /0 by proportion of di such that t 01 ⱕ di ⱕ t 02 /0 = proportion of d *i b such that t 01 ⱕ d *i b ⱕ t 02 over b = 1, . . . , B ^

5. Estimate the FDR by

For our data, there were an average of 54.76 false positives in the 100 permuted data sets, so using the estimate /ˆ 0 = 0.89 from earlier, our estimate of FDR is 0.89 • 54.76/252 = 19.3%. This is a little lower than the estimate of

Identifying Differentially Expressed Genes

155

22.7% for the symmetric rule. This often happens—by using the asymmetric cut points from SAM, we obtain lower FDRs than are obtained from symmetric ones. Note that the value 6 = 0.531 yielding 252 genes was chosen somewhat arbitrarily in the previous example. In practice, the investigator will want to vary 6 and examine the number of significant genes and the FDR (see Subheading 6.). In some settings, a short list of significant genes is desired, such as when Northern blot tests are to be carried out on the individual genes. In other more exploratory settings, a longer gene list would be preferred. It is shown in refs. 4 and 5 that the preceding estimate of FDR provides strong control of the FDR in that E[Fˆ DR] * FDR for any m or /0. That is, we expect that our estimate is conservative on average. Tusher et al. (1) use the same estimate of the FDR, except without the /ˆ 0 term. Other methods such as in refs. 6 and 7 provide methods for controlling the FDR when dependence exists, but it is shown in ref. 5 that our methodology is more powerful. (Note that there is dependence between the tests because the genes can be dependent.) In addition, Dudoit et al. (8) suggest using the methodology of Westfall et al. (2) to control the FWER when testing for differential gene expression. To reject the 252 genes that we did, the FWER would have to be controlled at a level of 99.8% using the methodology in ref. 2. This clearly shows that the FWER is an undesirable quantity to control. 6. The q Value A natural question to ask is how does one pick the rejection region (6 value)? In single hypothesis testing, one can assign a p value to a statistic, which is usually defined to be the probability of a statistic more extreme than the one observed given that the null hypothesis is true. The more technical definition of the p value for an observed statistic is the minimum type I error rate that can be attained over all rejection regions containing that observed statistic. In ref. 9, a natural false discovery rate analog of the p value is introduced, which is called the q value. The q value of a statistic is the minimum positive FDR (pFDR) that can be attained over all rejection regions containing that observed statistic. The pFDR is a modified version of the FDR—in short, it conditions on the event that R > 0 rather than setting V/R = 0 when R = 0. (We argue [9] that the pFDR is a more appropriate error rate than the FDR.) Therefore, in testing for differential gene expression, we suggest calculating the q value for each gene. It gives a measure of the strength of evidence for differential gene expression in terms of the pFDR. This is an individual measure for each gene that simultaneously takes into account the multiple comparisons. Note that by using the q value, it is not necessary to pick the rejection region or the desired error rate beforehand. The q value is included in the SAM software.

156

Storey and Tibshirani

7. Discussion Several other methods have been suggested for detecting differential gene expression. Newton et al. (10) developed a Bayesian method, although the multiple hypothesis testing was not taken into account. In fact, only posterior probabilities are reported according to this methodology. However, Newton et al. (10) do suggest taking into account both fold change and the variance of the fold change (equivalent to a t statistic). Efron et al. (11) suggest an empirical Bayes approach. Posterior probabilities are calculated as well, and no distributional assumptions are made. In both of these methods, it is important to realize that a posterior probability of differential gene expression given the value of the t statistic for only the gene at hand is not sufficient for looking at several genes at once. In ref. 12, Efron et al. go further, relating empirical Bayes probabilities to global and local versions of the FDR. In ref. 8, symmetric rejection regions and the FWER as the multiple hypothesis testing measure are used. They use the adjusted p value methodology of ref. 2. We have already discussed why symmetric rejection regions and the FWER result in a significant loss of power to detect differential gene expression. And we see no need to compute p values and adjust them. In this chapter, we have worked directly with test statistics and FDRs. A strength of the approach we have presented is that the rejection regions are chosen to accommodate the proportion and degree to which the affected genes are over- or underexpressed. In addition, the multiple comparisons are taken into account via a multiple hypothesis testing error rate that is appropriate for finding many significant genes, while limiting the proportion of false positives among those called significant. Of course, other methods may exist for choosing rejection regions or for assessing the false positives that provide a more powerful, but just as efficient, detection of differential gene expression. This is an active area of research, and some additional, interesting statistical methodology is bound to emerge. The methodology presented in this chapter is implemented in the SAM software and is available for downloading at www-stat.stanford.edu/~tibs/SAM/. References 1. Tusher, V., Tibshirani, R., and Chu, C. (2001) Significance analysis of microarrays applied to transcriptional responses to ionizing radiation. Proc. Natl. Acad. Sci. USA 98, 5116–5121. 2. Westfall, P. H. and Young, S. S. (1993) Resampling-Based Multiple Testing: Examples and Methods for p-Value Adjustment, Wiley, New York. 3. Benjamini, Y. and Hochberg, Y. (1985) Controlling the false discovery rate: a practical and powerful approach to multiple testing. J. Roy. Stat. Soc. B 85, 289–300.

Identifying Differentially Expressed Genes

157

4. Storey, J. D. A direct approach to false discovery rates, submitted. Available at www-stat.stanford.edu/~jstorey/. 5. Storey, J. D. and Tibshirani, R. Estimating false discovery rates under dependence, with applications to DNA microarrays, submitted. Available at www-stat. stanford.edu/~jstorey/. 6. Yekutieli, D. and Benjamini, Y. (1999) Resampling-based false discovery rate controlling multiple test procedures for corelated test statistics. J. Stat. Plan. Infer. 82, 171–196. 7. Benjamini, Y. and Yekutieli, D. The control of the false discovery rate in multiple testing under dependency, in press. 8. Dudoit, S., Yang, Y., Callow, M., and Speed, T. Statistical methods for identifying differentially expressed genes in replicated cdna microarray experiments. Available at www.stat.berkeley.edu/users/sandrine. 9. Storey, J. D. The positive false discovery rate: a Bayesian interpretation and the q-value, submitted. Available at www-stat.stanford.edu/~jstorey/. 10. Newton, M., Kendziorski, C., Richmond, C., Blatter, F., and Tsui, K. (2001) On differential variability of expression ratios: improving statistical inference about gene expression changes from microarray data. J. Compu. Biol. 8, 37–52. 11. Efron, B., Tibshirani, R., Storey, J. D., and Tusher, V. Empirical Bayes analysis of a microarray experiment. J. Am. Stat. Assoc., in press. 12. Efron, B., Storey, J., and Tibshirani, R. Microarrays, empirical Bayes methods, and false discovery rates, submitted.

Detecting Stable Clusters Using PCA

159

12 Detecting Stable Clusters Using Principal Component Analysis Asa Ben-Hur and Isabelle Guyon 1. Introduction Clustering is one of the most commonly used tools in the analysis of gene expression data (1,2). The usage in grouping genes is based on the premise that coexpression is a result of coregulation. It is often used as a preliminary step in extracting gene networks and inference of gene function (3,4). Clustering of experiments can be used to discover novel phenotypic aspects of cells and tissues (3,5,6), including sensitivity to drugs (7), and can also detect artifacts of experimental conditions (8). Clustering and its applications in biology are presented in greater detail in Chapter 13 (see also ref. 9). While we focus on gene expression data in this chapter, the methodology presented here is applicable for other types of data as well. Clustering is a form of unsupervised learning; that is, no information on the class variable is assumed, and the objective is to find the “natural” groups in the data. However, most clustering algorithms generate a clustering even if the data have no inherent cluster structure, so external validation tools are required. Given a set of partitions of the data into an increasing number of clusters (e.g., by a hierarchical clustering algorithm, or k-means), such a validation tool will tell the user the number of clusters in the data (if any). Many methods have been proposed in the literature to address this problem (10–15). Recent studies have shown the advantages of sampling-based methods (12,14). These methods are based on the idea that when a partition has captured the structure in the data, this partition should be stable with respect to perturbation of the data. Bittner et al. (16) used a similar approach to validate clusters representing gene expression of melanoma patients. From: Methods in Molecular Biology: vol. 224: Functional Genomics: Methods and Protocols Edited by: M. J. Brownstein and A. Khodursky © Humana Press Inc., Totowa, NJ

159

160

Ben-Hur and Guyon

The emergence of cluster structure depends on several choices: data representation and normalization, choice of a similarity measure and clustering algorithm. In this chapter, we extend the stability-based validation of cluster structure and propose stability as a figure of merit that is useful for comparing clustering solutions, thus helping one to make these choices. We use this framework to demonstrate the ability of principal component analysis (PCA) to extract features relevant to the cluster structure. We use stability as a tool for simultaneously choosing the number of principal components (PCs) and the number of clusters; we compare the performance of different similarity measures and normalization schemes. The approach is demonstrated through a case study of yeast gene expression data from Eisen et al. (1). For yeast, a functional classification of a large number of genes is known, and we use this classification for validating the results produced by clustering. A method for comparing clustering solutions specifically applicable to gene expression data was introduced in ref. 17. However, it cannot be used to choose the number of clusters and is not directly applicable in choosing the number of PCs. The results of clustering are easily corrupted by the addition of noise: even a few noise variables can corrupt a clear cluster structure (18). Several factors can hide a cluster structure in the context of gene expression data or other types of data: the cluster structure may be apparent in only a subset of the experiments or genes, or the data themselves may be noisy. Thus, clustering can benefit from a preprocessing step of feature/variable selection or from a filtering or denoising step. In the gene expression case study presented in this chapter, we find that using a few leading PCs enhances cluster structure. For a recent article that discusses PCA in the context of clustering gene expression see ref. 19. PCA constructs a set of uncorrelated directions that are ordered by their variance (20,21). In many cases, directions with the most variance are the most relevant to the clustering. Our results indicate that removing features with low variance acts as a filter that results in a distance metric that provides a more robust clustering. PCA is the basis for several variable selection techniques; variables that have a large component in low variance directions are discarded (22,23). This is also the basis of the “gene shaving” method (24) that builds a set of variables by iteratively discarding variables that are least correlated with the leading PCs. In the case of temporal gene expression data, the PCs were found to have a biological meaning, with the first components having a common variability (25–27). PCA is also useful as a visualization tool; it can provide a low-dimensional summary of the data (28), help detect outliers, and perform quality control (20).

Detecting Stable Clusters Using PCA

161

2. Principal Components We begin by introducing some notation. Our object of study is an n by d gene expression matrix, X, giving the expression of n genes in d experiments. The gene expression matrix has a dual nature: one can cluster either genes or experiments; to express this duality we can refer to X as (1)

in which gi = (xi1 , . . . , xid) are the expression levels of gene i across all experiments, or as (2)

in which ej = (x11, . . . , xnj)v are the expression levels in experiment j across all genes. In this chapter we cluster genes, i.e., the n patterns gi. When clustering experiments, substitute e and g in what follows. We make a distinction between a variable, which is each one of the d variables that make up gi, and a feature, which denotes a combination of variables. The PCs are q orthogonal directions that can be defined in several equivalent ways (20,21). They can be defined as the q leading eigenvectors of the covariance matrix of X. The eigenvalue associated with each vector is the variance in that direction. Thus, PCA finds a set of directions that explains the most variance. For Gaussian data, the PCs are the axes of any equiprobability ellipsoid. A low-dimensional representation of a data set is obtained by projecting the data on a small number of PCs. Readers interested in theoretical or algorithmic aspects of PCA should refer to textbooks devoted to the subject (20,21). The PCs can be defined as the q leading eigenvectors of the experiment– experiment covariance matrix: (3)

in which = 1/n -ni = 1 xij (1, . . . , 1) is a d-dimensional vector with the mean expression value for experiment j. Alternatively, the PCs can be defined through the correlation matrix: (4)

in which m(ei) is the vector of estimated standard deviation in experiment i. Equivalently, one can consider the PCs as the eigenvectors of the matrix XXv when applying first a normalization stage of centering:

162

Ben-Hur and Guyon (5)

or standardization: (

(6)

The first corresponds to PCA relative to the covariance matrix, and the second to PCA relative to the correlation matrix. To distinguish between the two, we denote them by centered PCA and standardized PCA, respectively. One can also consider PCs relative to the second moment matrix, i.e., without any normalization. In this case, the first PC often represents the mean of the data, and the larger the mean, the larger this component relative to the others. We note that for the case of two dimensional data the correlation matrix is of the form (1, a; a, 1), which has fixed eigenvectors (x, –x) and (x, x) (x = 32/2, for normalization), regardless of the value of a. Standardization can be viewed as putting constraints on the structure of the covariance matrix that in two dimensions fixes the PCs. In high-dimensional data this is not an issue, but a low-dimensional comparison of centered PCA and standardized PCA would be misleading. Standardization is often performed on data that contain incommensurate variables (i.e., variables that measure different quantities) and are incomparable unless they are made dimensionless (e.g., by standardization). In the case of commensurate variables, it has been observed that standardization can reduce the quality of a clustering (29). In microarray data, all experiments measure the same quantity, namely mRNA concentration, but still normalization across experiments might be necessary. The basic assumption in using PCA as a preprocessing before clustering is that directions of large variance are the result of structure in those directions. We begin with a toy example that illustrates this, and later we show results for gene expression data for which this applies as well. Consider the data plotted in Fig. 1 (see caption for details on its construction). There is clear cluster structure in the first and second variables. Centered PCA was applied. The first PC captures the structure that is present in the first two variables. Figure 2 shows that this component is essentially a 45° rotation of the first two variables. 3. Clustering and Hierarchical Clustering All clustering algorithms use a similarity or dissimilarity matrix and group patterns that are similar to each other. A similarity matrix gives a high score to “similar” patterns, with common examples being the Euclidean dot product or Pearson correlation. A dissimilarity matrix is a matrix whose entries reflect a “distance” between pairs of patterns; that is, close patterns have a low dissimilarity. The input to the clustering algorithm is either the similarity/dissimilarity matrix or the data patterns themselves, and the elements of the matrix are computed as needed.

Detecting Stable Clusters Using PCA

163

Fig. 1. Synthetic data example. Data consist of 200 patterns with 79 dimensions (variables), with components that are standard Gaussian i.i.d. numbers. As can be seen in the representation of the data (top), we added an offset to the first two dimensions (a positive offset of 1.6 for the first 100 patterns and a negative offset of –1.6 for the last 100). This results in the two clusters apparent in the scatter plot of the patterns in the first two dimensions (bottom left). The direction that separates the two clusters is captured by the first PC, as shown on the bottom right scatter plot of the first two PCs.

Clustering algorithms can be divided into two categories according to the type of output they produce: 1. Hierarchical clustering algorithms: These output a dendrogram, which is a tree representation of the data whose leaves are the input patterns and whose nonleaf

164

Ben-Hur and Guyon

Fig. 2. Histograms of components of first PC (left) and second PC (right). The count near –0.7 is the value for the first and second variables, representing the 45° rotation seen in Fig. 1. nodes represent a hierarchy of groupings (see Fig. 7). These come in two flavors: agglomerative and divisive. Agglomerative algorithms work bottom up, with each pattern in a separate cluster; clusters are then iteratively merged, according to some criterion. Divisive algorithms start from the whole data set in a single cluster and work top down by iteratively dividing each cluster into two components until all clusters are singletons. 2. Partitional algorithms: These provide a partition of a data set into a certain number of clusters. Partitional algorithms generally have input parameters that control the number of clusters produced.

A hierarchical clustering algorithm can be used to generate a partition, e.g. by cutting the dendrogram at some level (see Fig. 7 for an illustration). When doing so, we ignore singleton clusters; that is, when cutting the dendrogram to generate k clusters, we look for k non-singleton clusters. We found it useful to impose an even higher threshold, to ignore very small clusters. This approach provides a unified way of considering hierarchical and partitional algorithms, making our methodology applicable to a generic clustering algorithm. We choose to use the average linkage variety of hierarchical clustering (30,31), which has been used extensively in the analysis of gene expression data (1,2,16). In agglomerative hierarchical clustering algorithms, the two nearest (or most similar) clusters are merged at each step. In average linkage clustering, the distance between clusters is defined as the average distance between pairs of patterns that belong to the two clusters; as clusters are merged the distance matrix is updated recursively, making average linkage and other hierarchical clustering algorithms efficient and useful for the large data sets produced in gene expression experiments.

Detecting Stable Clusters Using PCA

165

3.1. Clustering Stability When using a clustering algorithm, several issues must be considered (10): 1. 2. 3. 4. 5.

Choice of a clustering algorithm. Choice of a normalization and similarity/dissimilarity measure. Which variables/features to cluster. Which patterns to cluster. Number of clusters: A clustering algorithm provides as output either a partition into k clusters or a hierarchical grouping and does not answer the question of whether there is actually structure in the data, and if there is, what clusters best describe it.

In this section we introduce a framework that helps in making these choices. We use it to choose the number of leading PCs (a form of feature selection) and to compare different types of normalization and similarity measures simultaneously with the discovery of the cluster structure in the data. The method we are about to describe is based on the following observation: When one looks at two subsamples of a cloud of data patterns with a sampling ratio, f (fraction of patterns sampled) not much smaller than 1 (say f > 0.5), one usually observes the same general structure (see Fig. 3). Thus, it is reasonable to postulate that a partition into k clusters has captured the structure in a data set if partitions into k clusters obtained from running the clustering algorithm with different subsamples are similar. This idea is implemented as follows: The whole dataset is clustered (the reference clustering); a set of subsamples is generated and clustered as well. For increasing values of k the similarity between partitions of the reference clustering into k clusters and partitions of the subsamples are computed (see the pseudo-code in Fig. 4). When the structure in the data is well represented by k clusters, the partition of the reference clustering will be highly similar to partitions of the subsampled data. At a higher value of k, some of the clusters will become unstable, and a broad distribution of similarities will be observed (12). The stable clusters represent the statistically meaningful structure in the data. Lack of structure in the data can also be detected: in this case the transition to instability occurs between k = 1 (all partitions identical by definition) and k = 2. The algorithm we have presented has two modular components (not mentioning the clustering algorithm itself): (1) a perturbation of the data set (e.g., subsampling), and (2) a measure of similarity between the perturbed clustering and a reference clustering (or, alternatively, between pairs of perturbed clusterings). Perturbing the data to probe for stability can be performed in several ways. One can subsample the patterns, as done here when clustering experiments one

166

Ben-Hur and Guyon

Fig. 3. Two 320-pattern subsamples of a 400-pattern Gaussian mixture. (Top) The two subsamples have essentially the same cluster structure, so clustering into four clusters yields similar results. (Bottom) The same subsamples; additional clusters can pop up in different locations due to different local substructure in each of the subsamples.

can consider subsampling the genes instead; this is reasonable in view of the redundancy observed in gene expression, since one typically observes many genes that are highly correlated with each other. Another alternative is to add noise to the data (15). In both cases, the user has to decide on the magnitude of the perturbation—what fraction of the features or variables to subsample, or how much noise to add. In our experiments we found that subsampling worked well, and equivalent results were obtained for a wide range of subsampling fractions. For the second component of the algorithm, a measure of similarity, one can choose one of the several similarity measures proposed in the statistical literature. We introduce a similarity measure originally defined in ref. 15 and

Detecting Stable Clusters Using PCA

167

Fig. 4. Pseudo-code for producing a distribution of similarities. If the distribution of similarities is concentrated near its maximum value, then the corresponding reference partition is said to be stable. In the next subsection it will be refined to assign a stability to individual clusters. Here, it is presented for a hierarchical clustering algorithm, but it can be used with a generic clustering algorithm with minor changes.

then propose an additional one that provides more detailed information about the relationship between the two clusterings. We define the following matrix representation of a partition: (7)

Let two clusterings have matrix representations C (1) and C (2). The dot product (8)

counts the number of pairs of patterns clustered together in both clusterings and can also be interpreted as the number of edges common to the graphs represented by C (1) and C (2). The dot product satisfies the Cauchy–Schwartz inequality: and thus can be normalized into a correlation or cosine similarity measure:

168

Ben-Hur and Guyon (9)

Remark. The cluster labels produced by a clustering algorithm (“cluster 1,” “cluster 2,” etc.) are arbitrary, and the similarity measure just defined is independnt of actual cluster labels: it is defined through the relationship between pairs of patterns—whether patterns i and j belong to the same cluster, regardless of the label given to the cluster. As mentioned, the signal for the number of clusters can be defined by a transition from highly similar clustering solutions to a wide distribution of similarities. In some cases, the transition is not well defined; if a cluster breaks into two clusters, one large and the other small, the measure of similarity we have presented will still give a high similarity score to the clustering. As a consequence, the number of clusters will be overestimated. To address this issue, and to provide stability scores to individual clusters, we present a new similarity score. 3.2. Associating Clusters of Two Partitions Here, we represent a partition L by assigning a cluster label from 1 to k to each pattern. The similarity measure defined next is motivated by the success rate from supervised learning, which is the sum of the diagonal elements of the confusion matrix between two sets of labels L1 and L2. The confusion matrix measures the size of the intersection between the clusters in two labelings: (10)

in which |A| denotes the cardinality of the set A, and L = i is the set of patterns in cluster i. A confusion matrix like

represents clusterings that are very similar to each other. The similarity will be quantified by the sum of the diagonal elements. However, in clustering no knowledge about the clusters is assumed, so the labels 1, . . . , k are arbitrary, and any permutation of the labels represents the same clustering. Thus, we might actually get a confusion matrix of the form 1 48 47 2 that represents the same clustering. This confusion matrix can be “diagonalized” if we identify cluster 1 in the first labeling with cluster 2 in the second labeling and cluster 2 in the first labeling with cluster 1 in the second labeling. The similarity is then computed as the sum of the diagonal elements of the

Detecting Stable Clusters Using PCA

169

“diagonalized” confusion matrix. The diagonalization, essentially a permutation of the labels, will be chosen to maximize the similarity. We now formulate these ideas. Given two labelings L1 and L2 with k1, k2 labels, respectively, we assume k1 ) k2. An association m is defined as a one-to-one function m: {1, . . . , k1} → {1, . . . , k2}. The unsupervised analog of the success rate is now defined as follows: (11)

Remark. The computation of the optimal association m (L1, L2) by brute-force enumeration is exponential in the number of clusters, since the number of possible one-to-one associations is exponential. To handle this, it was computed by a greedy heuristic: First, clusters from L1 are associated with the clusters of L2 with which they have the largest overlap. Conflicts are then resolved one by one; if two clusters are assigned to the same cluster, the one that has smaller overlap with the cluster is assigned to the cluster with which it has the next largest overlap. The process is iterated until no conflicting assigments are present. This method of conflict resolution guarantees the convergence of this process. For small overlap matrices in which exact enumeration can be performed, the results were checked to be identical. Even if, from time to time, the heuristic does not find the optimal solution, our results will not be affected, since we are interested in the statistical properties of the similarity. Next, we use the optimal association to define concepts of stability for individual patterns and clusters. For a pattern i, two labelings L1, L2, and an optimal association m, define the patternwise agreement between L1 and L2: (12)

Thus, bm(i) = 1 iff pattern i is assigned to the same cluster in the two partitions relative to the association m. We note that s(L1, L2) can be equivalently expressed as 1/n -i bm(i). Now we define patternwise stability as the fraction of subsampled partitions in which the subsampled labeling of pattern i agrees with that of the reference labeling, by averaging the patternwise agreement, Eq. 12: (13)

in which Ni is the number of subsamples in which pattern i appears. The patternwise stability can indicate problem patterns that do not cluster well. Cluster stability is the average of the patternwise stability:

170

Ben-Hur and Guyon (14)

We note that cluster stability should not be interpreted as stability per se: Suppose that a stable cluster splits into two clusters in an unstable way, and one cluster is larger than the other. In subsamples of the data, clusters will tend to be associated with the larger subcluster, with the result that the large cluster will have a higher cluster stability. Thus, the stability of the smaller cluster is the one that reflects the instability of this split. This can be seen in Fig. 7. Therefore, we define the stability of a reference clustering into k clusters as follows:

Sk = min c( j ) j

(15)

In computing Sk we ignore singletons or very small clusters. A dendrogram with stability measurements will be called a stability annotated dendrogram (see Fig. 7). 4. Experiments on Gene Expression Data In this section, we use the yeast DNA microarray data of Eisen et al. (1) as a case study. Functional annotations were used to choose the five functional classes that were most learnable by SVMs (32) and noted by Eisen et al. (1) to cluster well. We looked at the genes that belong uniquely to these five functional classes. This gave a data set with 208 genes and 79 variables (experiments) in the following classes: 1. 2. 3. 4. 5.

Tricarboxylic acid cycle (TCA) (14 genes). Respiration (27 genes). Cytoplasmatic ribosomal proteins (121 genes). Proteasomes (35 genes). Histones (11 genes).

4.1. Clustering of Centered PCA Variables A scatter plot of the first three centered PCs is shown in Fig. 5. Clear cluster structure that corresponds to the functional classes is apparent in the plot. Classes 1 and 2, however, are overlapping. For comparison, we show a scatter plot of the next three PCs (Fig. 6), of which visual inspection shows no structure. This supports the premise that cluster structure should be apparent in the leading PCs. To support this premise further, we analyze results of clustering the data in the original variables, and in a few leading PCs. We use the average linkage hierarchical clustering algorithm (30) with a Euclidean distance. When using the first three centered PCs, the functional classes are recovered well by clustering, with the exception of classes 1 and 2 (TCA and respiration),

Detecting Stable Clusters Using PCA

171

Fig. 5. Scatter plot of first three centered PCs of yeast data. The symbols correspond to the five functional classes.

which cannot be distinguished. The high similarity between the expression patterns of these two classes was also noted by Brown et al. (32). This is seen in the confusion matrix between the functional class labels and the clustering labels for k = 4: classes clustering

1 2 3 4

MIPS classification 1 2 3 4

5

11 10 12 10

0 0 3 8

27 10 10 10

110 121 110 110

12 10 33 10

As already pointed out, when we say that we partition the data into four clusters we mean four nonsingleton clusters (or, more generally, clusters larger than some threshold). This allows us to ignore outliers, making comparisons of

172

Ben-Hur and Guyon

Fig. 6. Scatter plot of PCs four to six for yeast data.

partitions into k clusters more meaningful, since an outlier will not appear in all the subsamples clustered. Indeed, in the dendrogram in Fig. 7 for k = 4, we find one singleton cluster for a total of five clusters. The choice of k = 4 is justified by the stability method: The top dendrogram in Fig. 7 shows a stability annotated dendrogram for the PCA data. The numbers at each node indicate the cluster stability of the corresponding cluster averaged over all the levels at which the cluster appears. All the functional classes appear in clusters with cluster stability above 0.96. The ribosomal cluster then splits into two clusters, one of them having a stability value of 0.62, indicating that this split is unstable; the stability annotated dendrogram (Fig. 7) and the plot of the minimum cluster stability, Sk (Fig. 9), show that the functional classes correspond to the stable clusters in the data.

Detecting Stable Clusters Using PCA

173

Fig. 7. Stability annotated dendrograms for yeast data. Numbers represent the cluster stability of a node. Cluster stability is averaged over all the levels in the hierarchy in which a cluster appears. The horizontal line represents the cutoff suggested by cluster stability; boldface represents the stability of the corresponding unstable split. (Top) Data composed of three leading centered PCA variables. The vertical axis gives intercluster distances. The nodes that correspond to the functional classes are indicated. (Bottom) Clustering of all 79 centered variables.

174

Ben-Hur and Guyon

When using all the variables (or, equivalently, all PCs), the functional classes are recovered at k = 5, but not as well: classes clustering

1 2 3 4 5

MIPS classification 1 2 3 4

5

6 3 0 4 0

0 0 0 2 9

22 10 10 15 10

110 110 121 110 010

12 10 10 33 10

The same confusion matrix was observed when using 20 leading PCs or more. However, clustering into k = 5 clusters is not justified by the stability criterion: the split into the proteasome and TCA/respiration clusters is highly unstable (see the bold number in the bottom stability annotated dendrogram in Fig. 7). Only a partition into three clusters is stable. Inspecting the dendrograms also reveals an important property of clustering of the leading PCs: the cluster structure is more apparent in the PCA dendrogram, using q = 3 components. Using all the variables, the distances between nearest neighbors and the distances between clusters are comparable, whereas for q = 3 nearest-neighbor distances are very small compared with the distances between clusters, making the clusters more well defined and, consequently, more stable. Using the comparison with the “true” labels, it was clear that the three-PC data provided more detailed stable structure (three vs. four clusters). “True” labels are not always available, so we would like a method for telling which of two partitions is more “refined.” We define a refinement score, also defined using the confusion matrix: (16)

The motivation for this score is illustrated with the help of Fig. 8. Both blue clusters have a big overlap with the large red clusters and r(blue, red) = 1/16 (7 + 7), which is close to 1, in agreement with our intuition that the blue clustering is basically a division of the big red cluster into two clusters. On the other hand r(red, blue) = 1/16 (2 + 7), with a much lower score. It is straightforward to verify that 1/2 ) r(L1, L2) ) 1, and thus r(red, blue) is close to its lower bound. To make the relationship with the previous score more clear, we note that it can be defined as s(L1, L2), in which the association m is not constrained to be one to one, so that each cluster is associated with the cluster

Detecting Stable Clusters Using PCA

175

Fig. 8. Two clusterings of a data set, represented by red and blue, with associated confusion matrix.

with which it has the maximum overlap. If L1 is obtained by splitting one of the clusters of L2, then r(L1, L2) = 1, and r(L2, L1) = 1 – the fraction of patterns in the smaller of the two clusters that have split. The refinement score is interesting when it comes to comparing clusterings obtained from different algorithms, different subsets of features, or different dendrograms obtained with any kind of parameter change. Given two stable partitions L1 and L2, one can then determine which of the two partitions is more refined according to which of r(L1, L2) or r(L2, L1) is larger. Merely counting the number of clusters to estimate refinement can be misleading since given two partitions with an identical number of clusters, one may be more refined than the other (as exemplified in Fig. 7). It is even possible that a partition with a smaller number of clusters will be more refined than a partition with a larger number of clusters. 4.2. Stability-Based Choice of Number of PCs The results of the previous section indicated that three PCs gave a more stable clustering than that obtained using all the variables. Next, we will determine the best number of PCs. In the choice of PCs we will restrict ourselves to choosing the number of leading components, rather than choosing the best components, not necessarily by order of variance. We still consider centered-PCA data. The stability of the clustering as measured by the minimum cluster stability, Sk, is plotted for a varying number of PCs in Fig. 9. Partitions into up to three clusters are stable regardless of the number of PCs, as evidenced by Sk being close to 1. Partitions into four clusters are most stable for three or four PCs,

176

Ben-Hur and Guyon

Fig. 9. For each k, the average of the minimum cluster stability, Sk (cf. Eq. 15), is estimated for a varying number of PCs (q).

and slightly less so for seven PCs, with Sk still close to 1. For a higher number of PCs, the stability of four clusters becomes lower (between 0.4 and 0.8). Moreover, the stable structure observed in three to seven components at k = 4 is only observed at k = 5 for a higher number of PCs (and is unstable). The cluster structure is less stable with two PCs than in three to seven. The scatter plot of the PCs shows that the third PC still contains relevant structure; this is in agreement with the instability for two components, which are not sufficient. To conclude, a small number of leading PCs produced clustering solutions that were more stable (i.e., significant) and also agreed better with the known classification. Our observation on the power of PCA to produce a stable classification was seen to hold on data sets in other domains as well. Typically, when the number of clusters was higher, more PCs were required to capture the cluster structure. Other clustering algorithms that use the Euclidean distance were also seen to benefit from a preprocessing using PCA (33). 4.3. Clustering of Standardized PCs In this section, we compare clustering results on centered and standardized PCs. We limit ourselves to the comparison of q = 3 and q = 79 PCs. A scatter

Detecting Stable Clusters Using PCA

177

Fig. 10. Scatter plot of first three standardized PCs.

plot of the first three standardized PCs is shown in Fig. 10. These show less cluster structure than in the centered PCs (Fig. 5). The stability validation tool indicates the existence of four clusters, with the following confusion matrix: classes clustering

1 2 3 4

MIPS classification 1 2 3 4

5

9 5 0 0

2 0 0 9

27 10 10 10

110 110 121 110

35 10 10 10

In this case, classes 1, 2, and 4 cannot be distinguished by clustering. A similar confusion matrix is obtained when clustering the standardized variables without applying PCA. We conclude that the degradation in the recovery of the functional classes should be attributed to normalization, rather than to the use of PCA. Other investigators have also found that standardization can deteriorate the quality of clustering (29,34).

178

Ben-Hur and Guyon

Let Lcentered and Lstandardized be the stable partitions into four and three clusters, respectively, of the centered and standardized PCA data using three PCs. The refinement scores for these partitions are found to be r(Lcentered, Lstandardized) = 0.8125 and r(Lstandardized, Lcentered) = 0.995, showing that the centered clustering contains more detailed stable structure. Thus, the known cluster labels are not necessary to arrive at this conclusion. 4.4. Clustering Using Pearson Correlation Here we report results using the Pearson correlation similarity measure (the gene–gene correlation matrix). Clustering using the Pearson correlation as a similarity measure recovered the functional classes in a stable way without the use of PCA (see the stability annotated dendrogram in Fig. 11). It seems that the Pearson correlation is less susceptible to noise than the Euclidean distance: the Pearson correlation clustering is more stable than the Euclidean clustering that uses all the variables; also compare the nearest-neighbor distances, which are much larger in the Euclidean case. This may be the result of the Pearson correlation similarity being a sum of terms that are either positive or negative, resulting in some of the noise canceling out; in the case of the Euclidean distance, no cancelation can occur since all terms are positive. The Pearson correlation did not benefit from the use of PCA. 5. Other Methods for Choosing PCs In a recent article, it was claimed that PCA does not generally improve the quality of clustering of gene expression data (19). We suspect that the claim was a result of the use of standardization as a normalization, which in our analysis reduced the quality of the clustering, rather than the use of PCA. The authors’ criterion for choosing components was external—comparison with known labels—and thus cannot be used in general. We use a criterion that does not require external validation. However, running it is relatively timeconsuming since it requires running the clustering algorithm a large number of times to estimate the stability (a value of 100 was used here). Therefore, we restricted the feature selection to the choice of the number of leading PCs. When using PCA to approximate a data matrix, the fraction of the total variance in the leading PCs is used as a criterion for choosing how many of them to use (20). In the yeast data analyzed in this chapter, the first three PCs contain only 31% of the total variance in the data. Yet, 3–5 PCs out of 79 provide the most stable clustering, which also agrees best with the known labels. Thus, the total variance is a poor way of choosing the number of PCs when the objective is clustering. On the contrary, we do not wish to reconstruct the matrix, only the essential features that are responsible for cluster structure.

Detecting Stable Clusters Using PCA

179

Fig. 11. Stability annotated dendrogram for yeast data with the Pearson correlation similarity measure. The vertical axis is 1–correlation. The functional classes are stable; their subclusters are unstable.

6. Conclusion In this chapter, we proposed a novel methodology for evaluating the merit of clustering solutions. It is based on the premise that well-defined cluster structure should be stable under perturbation of the data. We introduced notions of stability at the level of a partition, cluster, and pattern that allow us, in particular, to generate stability annotated dendrograms. Using stability as a figure of merit, along with a measure of cluster refinement, allows us to compare stable solutions run using different normalizations, similarity measures, clustering algorithms, or input features. We demonstrated this methodology on the task of choosing the number of PCs and normalization to be used to cluster a yeast gene expression data set. It was shown that PCA improves the extraction of cluster structure, with respect to stability, refinement, and coincidence with known “ground truth” labels. This means that, in this data set, the cluster structure is present in directions of largest variance (or best data reconstruction). Beyond this simple example, our methodology can be used for many “model selection” problems in clustering, including selecting the clustering algorithm itself, the parameters of the

180

Ben-Hur and Guyon

algorithm, the variables and patterns to cluster, the similarity, normalization or other preprocessing, and the number of clusters. It allows us not only to compare clustering solutions, but also to detect the presence or absence of structure in data. In our analysis, we used a hierarchical clustering algorithm, but any other clustering algorithm can be used. The versatility and universality of our methodology, combined with its simplicity, may appeal to practitioners in bioinformatics and other fields. Further work includes laying the theoretical foundations of the methodology and additional testing of the ideas in other domains. Acknowledgments We thank André Elisseeff and Bronwyn Eisenberg for their helpful comments on the manuscript. References 1. Eisen, M., Spellman, P., Brown, P., and Botstein, D. (1998) Cluster analysis and display of genome-wide expression patterns. Proc. Natl. Acad. Sci. USA 95, 14,863–14,868. 2. Quackenbush, J. (2001) Computational anaysis of microarray data. Nat. Rev. Genet. 2, 418–427. 3. Ross, D., Scherf, U., Eisen, M., et al. (2000) Systematic variation in gene expression patterns in human cancer cell lines. Nat. Genet. 24, 227–235. 4. D’haeseleer, P., Liang, S., and Somogyi, R. (2000) Genetic network inference: from co-expression clustering to reverse engineering. Bioinformatics 16, 707–726. 5. Alon, U., Barkai, N., Notterman, D., Gish, G., Ybarra, S., Mack, D., and Levine, A. J. (1999) Broad patterns of gene expression revealed by clustering analysis of tumor and normal colon tissues probed by oligonucleotide arrays. PNAS 96, 6745–6750. 6. Alizadeh, A. A., et al. (2000) Distinct types of diffuse large B-cell lymphoma identified by gene expression profiling. Nature 403, 503–511. 7. Scherf, U., Ross, D. T., Waltham, M., et al. (2000) A gene expression database for the molecular pharmacology of cancer. Nat. Genet. 24, 236–244. 8. Getz, G., Levine, E., and Domany, E. (2000) Coupled two-way clustering analysis of gene microarray data. Proc. Natl. Acad. Sci. USA 94, 12,079–12084. 9. Shamir, R. and Sharan, R. (2001) Algorithmic approaches to clustering gene expression data, in Current Topics in Computational Biology (Jiang, T., Smith, T., Xu, Y., and Zhang, M., eds.), MIT Press, Cambridge, MA, pp. 269–299. 10. Milligan, G. (1996) Clustering validation: results and implications for applied analysis, in Clustering and Classification (Arabie, P., Hubert, L., and Soete, G. D., eds.), World Scientific, River Edge, NJ, pp. 341–374. 11. Tibshirani, R., Walther, G., and Hastie, T. (2001) Estimating the number of clusters in a dataset via the gap statistic. J. Roy. Stat. Soc. 63, 411–423.

Detecting Stable Clusters Using PCA

181

12. Ben-Hur, A., Elisseeff, A., and Guyon, I. (2002) A stability based method for discovering structure in clustered data, in Pacific Symposium on Biocomputing (Altman, R., Dunker, A., Hunter, L., Lauderdale, K., and Klein, T., eds.), World Scientific, River Edge, NJ, pp. 6–17. 13. Levine, E. and Domany, E. (2001) Resampling method for unsupervised estimation of cluster validity. Neural Comp. 13, 2573–2593. 14. Fridlyand, J. (2001) Resampling methods for variable selection and classification: applications to genomics, PhD thesis, University of California at Berkeley. 15. Fowlkes, E. and Mallows, C. (1983) A method for comparing two hierarchical clusterings. J. Am. Stat. Assoc. 78, 553–584. 16. Bittner, M., Meltzer, P., Chen, Y., et al. (2000) Molecular classification of cutaneous malignant melanoma by gene expression profiling. Nature 406, 536–540. 17. Yeung, K., Haynor, D., and Ruzzo, W. (2001) Validating clustering for gene expression data. Bioinformatics 17, 309–318. 18. Milligan, G. (1980) An examination of the effect of six types of error perturbation on fifteen clustering algorithms. Psychometrika 45, 325–342. 19. Yeung, K. and Ruzzo, W. (2001) An empirical study of principal component analysis for clustering gene expression data. Bioinformatics 17, 763–774. 20. Jackson, J. (1991) A User’s Guide to Principal Components, John Wiley & Sons, New York, NY. 21. Jolliffe, I. (1986) Principal Component Analysis, Springer-Verlag, New York, NY. 22. Jolliffe, I. (1972) Discarding variables in principal component analysis I: artificial data. Appl. Stat. 21, 160–173. 23. Jolliffe, I. (1972) Discarding variables in principal component analysis II: real data. Appl. Stat. 21, 160–173. 24. Hastie, T., Tibshirani, R., Eisen, M., Alizadeh, A., Levy, R., Staudt, L., Chan, W., Botstein, D., and Brown, P. (2000) “Gene shaving” as a method for identifying distinct sets of genes with similar expression patterns. Genome Biol. 1, 1–21. 25. Alter, O., Brown, P., and Botstein, D. (2000) Singular value decomposition for genomewide expression data processing and modeling. Proc. Natl. Acad. Sci. USA 97, 10101–10106. 26. Raychaudhuri, S., Stuart, J., and Altman, R. (2000) Principal components analysis to summarize microarray experiments: application to sporulation time series. Pacific Symp. Biocomp. 5, 452–463. 27. Hilsenbeck, S., Friedrichs, W., Schiff, R., O’Connell, P., Hansen, R., Osborne, C., and Fuqua, S. (1999) Statistical analysis of array expression data as applied to the problem of tamoxifen resistance. J. Natl. Cancer Inst. 91, 453–459. 28. Wen, X., Fuhrman, S., Michaels, G., Carr, D., Smith, S., Barker, J., and Somogyi, R. (1998) Large-scale temporal gene expression mapping of central nervous system development. Proc. Natl. Acad. Sci. USA 95, 334–339. 29. Milligan, G. and Cooper, M. (1988) A study of variable standardization. J. Classif. 5, 181–204.

182

Ben-Hur and Guyon

30. Jain, A. and Dubes, R. (1988) Algorithms for Clustering Data, Prentice Hall, Englewood Cliffs, NJ. 31. Kaufman, L. and Rousseeuw, P. (1990) Finding Groups in Data, Wiley Interscience, John Wiley & Sons, New York, NY. 32. Brown, M., Grundy, W., Lin, D., Cristianini, N., Sugnet, C., Ares, M., and Haussler, D. (2000) Knowledge-based analysis of microarray gene expression data by using support vector machines. Proc. Natl. Acad. Sci. USA 97, 262–267. www.cse.ucsc.edu/research/compbio/genex. 33. Ben-Hur, A., Horn, D., Siegelmann, H., and Vapnik, V. (2001) Support vector clustering. J. Machine Learn. Res. 2, 125–137. 34. Anderberg, M. (1983) Cluster Analysis for Applications, Academic, New York.

Clustering in Life Sciences

183

13 Clustering in Life Sciences Ying Zhao and George Karypis 1. Introduction Clustering is the task of organizing a set of objects into meaningful groups. These groups can be disjoint, overlapping, or organized in some hierarchical fashion. The key element of clustering is the notion that the discovered groups are meaningful. This definition is intentionally vague, because what constitutes meaningful is, to a large extent, application dependent. In some applications, this may translate to groups in which the pairwise similarity between their objects is maximized, and the pairwise similarity between objects of different groups is minimized. In some other applications, this may translate to groups that contain objects that share some key characteristics, even though their overall similarity is not the highest. Clustering is an exploratory tool for analyzing large data sets and has been used extensively in numerous application areas. Clustering has a wide range of applications in life sciences and, over the years, has been used in many areas including the analysis of clinical information, phylogeny, genomics, and proteomics. For example, clustering algorithms applied to gene expression data can be used to identify coregulated genes and provide a genetic fingerprint for various diseases. Clustering algorithms applied on the entire database of known proteins can be used to automatically organize the different proteins into close- and distant-related families, and to identify subsequences that are mostly preserved across proteins (1–5). Similarly, clustering algorithms applied to the tertiary structural data sets can be used to perform a similar organization and provide insights into the rate of change between sequence and structure (6,7). The primary goal of this chapter is to provide an overview of the various issues involved in clustering large data sets, describe the merits and underlying From: Methods in Molecular Biology: vol. 224: Functional Genomics: Methods and Protocols Edited by: M. J. Brownstein and A. Khodursky © Humana Press Inc., Totowa, NJ

183

184

Zhao and Karypis

assumptions of some of the commonly used clustering approaches, and provide insights on how to cluster data sets arising in various areas within life sciences. Toward this end, the chapter is organized broadly in three parts. The first part (Subheadings 2.–4.) describes the various types of clustering algorithms developed over the years, the various methods for computing the similarity between objects arising in life sciences, and methods for assessing the quality of the clusters. The second part (Subheading 5.) focuses on the problem of clustering data arising from microarray experiments and describes some of the commonly used approaches. Finally, the third part (Subheading 6.) provides a brief introduction to CLUTO, a general purpose toolkit for clustering various data sets, with an emphasis on its applications to problems and analysis requirements within life sciences. 2. Types of Clustering Algorithms The topic of clustering has been extensively studied in many scientific disciplines and a variety of different algorithms have been developed (8–20). Two recent surveys on the topic (21,22) offer a comprehensive summary of the different applications and algorithms. These algorithms can be categorized along different dimensions based on either the underlying methodology of the algorithm, leading to partitional or agglomerative approaches; the structure of the final solution, leading to hierarchical or nonhierarchical solutions; the characteristics of the space in which they operate, leading to feature or similarity approaches; or the type of clusters that they discover, leading to globular or transitive clustering methods. 2.1. Agglomerative and Partitional Algorithms Partitional algorithms, such as K-means (9,23), K-medoids (9,11,23), probabilistic (10,24), graph-partitioning based (9,25–27), or spectral based (28), find the clusters by partitioning the entire data set into either a predetermined or an automatically derived number of clusters. Partitional clustering algorithms compute a k-way clustering of a set of objects either directly or via a sequence of repeated bisections. A direct k-way clustering is commonly computed as follows. Initially, a set of k objects is selected from the data sets to act as the seeds of the k clusters. Then, for each object, its similarity to these k seeds is computed, and it is assigned to the cluster corresponding to its most similar seed. This forms the initial k-way clustering. This clustering is then repeatedly refined so that it optimizes a desired clustering criterion function. A k-way partitioning via repeated bisections is obtained by recursively applying the above algorithm to compute two-way clustering (i.e., bisections). Initially, the objects are partitioned into two clusters, then one of these clusters is selected and is further bisected,

Clustering in Life Sciences

185

and so on. This process continues k – 1 times, leading to k clusters. Each of these bisections is performed so that the resulting two-way clustering solution optimizes a particular criterion function. Criterion functions used in the partitional clustering reflect the underlying definition of the “goodness” of clusters. The partitional clustering can be considered an optimization procedure that tries to create high-quality clusters according to a particular criterion function. Many criterion functions have been proposed (9,29,30); and some are described in Subheading 6. Criterion functions measure various aspects of intracluster similarity, intercluster dissimilarity, and their combinations. These criterion functions utilize different views of the underlying collection, either by modeling the objects as vectors in a high-dimensional space or by modeling the collection as a graph. Hierarchical agglomerative algorithms find the clusters by initially assigning each object to its own cluster and then repeatedly merging pairs of clusters until a certain stopping criterion is met. Consider an n-object data set and the clustering solution that has been computed after performing l merging steps. This solution will contain exactly n – l clusters, as each merging step reduces the number of clusters by one. Now, given this (n – l)-way clustering solution, the pair of clusters that is selected to be merged next, is the one that leads to an (n – l – 1)-way solution that optimizes a particular criterion function. That is, each one of the (n – l) × (n – l – 1)/2 pairs of possible merges is evaluated, and the one that leads to a clustering solution that has the maximum (or minimum) value of the particular criterion function is selected. Thus, the criterion function is locally optimized within each particular stage of agglomerative algorithms. Depending on the desired solution, this process continues either until there are only k clusters left, or when the entire agglomerative tree has been obtained. The three basic criteria to determine which pair of clusters to be merged next are single link (31), complete -link (32), and group average Unweighted Pair Group Method with Arithmetic Mean (UPGMA) (9). The single-link criterion function measures the similarity of two clusters by the maximum similarity between any pair of objects from each cluster, whereas the complete-link criterion uses the minimum similarity. In general, both the single- and the complete-link approaches do not work very well because they either base their decisions on a limited amount of information (single link), or assume that all the objects in the cluster are very similar to each other (complete link). On the other hand, the group average approach measures the similarity of two clusters by the average of the pairwise similarity of the objects from each cluster and does not suffer from the problems arising with the single- and complete-link approaches. In addition to these three basic approaches, a number of more sophisticated schemes have been developed, such as CURE (18), ROCK (19), CHAMELEON (20), that have been shown to produce superior results.

186

Zhao and Karypis

Finally, hierarchical algorithms produce a clustering solution that forms a dendrogram, with a single all-inclusive cluster at the top and single-point clusters at the leaves. By contrast, in nonhierarchical algorithms, there tends to be no relation between the clustering solutions produced at different levels of granularity. 2.2. Feature- and Similarity-Based Clustering Algorithms Another distinction between the different clustering algorithms is whether or not they operate on the object’s feature space or on a derived similarity (or distance) space. K-means-based algorithms are the prototypical examples of methods that operate on the original feature space. In this class of algorithms, each object is represented as a multidimensional feature vector, and the clustering solution is obtained by iteratively optimizing the similarity (or distance) between each object and its cluster centroid. By contrast, similarity-based algorithms compute the clustering solution by first computing the pairwise similarities between all the objects and then use these similarities to drive the overall clustering solution. Hierarchical agglomerative schemes, graphbased schemes, as well as K-medoid, fall into this category. The advantages of similarity-based methods is that they can be used to cluster a wide variety of data sets, provided that reasonable methods exist for computing the pairwise similarity between objects. For this reason, they have been used to cluster both sequential (1,2) and graph data sets (33,34), especially in biological applications. However, there has been limited work in developing clustering algorithms that operate directly on the sequence or graph datasets (35). Similarity-based approaches do have two key limitations. First, their computational requirements are high since they have to compute the pairwise similarity between all the objects that need to be clustered. As a result, such algorithms can only be applied to relatively small data sets (a few thousand objects), and they cannot be effectively used to cluster the data sets arising in many fields within life sciences. Second, by not using the object’s feature space and relying only on the pairwise similarities, they tend to produce suboptimal clustering solutions especially when the similarities are low relative to the cluster sizes. The key reason for this is that these algorithms can only determine the overall similarity of a collection of objects (i.e., a cluster) by using measures derived from the pairwise similarities (e.g., average, median, or minimum pairwise similarities). However, such measures, unless the overall similarity between the members of different clusters is high, are quite unreliable because they cannot capture what is common between the different objects in the collection. Clustering algorithms that operate in the object’s feature space can overcome both of these limitations. Since they do not require the precomputation

Clustering in Life Sciences

187

of the pairwise similarities, fast partitional algorithms can be used to find the clusters, and since their clustering decisions are made in the object’s feature space, they can potentially lead to better clusters by correctly evaluating the similarity between a collection of objects. For example, in the context of clustering protein sequences, the proteins in each cluster can be analyzed to determine the conserved blocks, and use only these blocks in computing the similarity between the sequences (an idea formalized by profile HMM approaches (36,37)). Recent studies in the context of clustering large highdimensional data sets done by various groups (38–41) show the advantages of such algorithms over those based on similarity. 2.3. Globular and Transitive Clustering Algorithms Besides the operational differences among various clustering algorithms, another key distinction among them is the type of clusters that they discover. There are two general types of clusters that often arise in different application domains. What differentiates these types is the relationship between the cluster’s objects and the dimensions of their feature space. The first type of cluster contains objects that exhibit a strong pattern of conservation along a subset of their dimensions. That is, there is a subset of the original dimensions in which a large fraction of the objects agree. For example, if the dimensions correspond to different protein motifs, then a collection of proteins will form a cluster, if a subset of motifs is present in a large fraction of the proteins. This subset of dimensions is often referred to as a subspace, and the aforementioned property can be viewed as the cluster’s objects and its associated dimensions forming a dense subspace. Of course, the number of dimensions in these dense subspaces,and the density (i.e., how large the fraction is of the objects that share the same dimensions) will be different from cluster to cluster. Exactly this variation in subspace size and density (and the fact that an object can be part of multiple disjoint or overlapping dense subspaces) is what complicates the problem of discovering this type of clusters. There are a number of application areas in which such clusters give rise to meaningful groupings of the objects (i.e., domain experts will tend to agree that the clusters are correct). Such areas includes clustering documents based on the terms that they contain, clustering customers based on the products they purchase, clustering genes based on their expression levels, and clustering proteins based on the motifs that they contain. The second type of cluster contains objects in which, again, there exists a subspace associated with that cluster. However, unlike the earlier case, in these clusters there will be subclusters that may share a very small number of the subspace’s dimension, but there will be a strong path within that cluster that will connect them. By “strong path” we mean that if A and B are two

188

Zhao and Karypis

subclusters that share only a few dimensions, then there will be another set of subclusters X1, X2, . . . , Xk, that belong to the cluster, such that each of the subcluster pairs (A, X1), (X1, X2), . . . , (Xk, B) will share many of the subspace’s dimensions. What complicates cluster discovery in this setting is that the connections (i.e., shared subspace dimensions) between subclusters within a particular cluster will tend to be of different strength. Examples of this type of cluster include protein clusters with distant homologies or clusters of points that form spatially contiguous regions. Our discussion so far has focused on the relationship between the objects and their feature space. However, these two classes of clusters can also be understood in terms of the object-to-object similarity graph. The first type of clusters will tend to contain objects in which the similarity among all pairs of objects will be high. By contrast, in the second type of cluster, there will be a lot of objects whose direct pairwise similarity will be quite low, but these objects will be connected by many paths that stay within the cluster that traverse high-similarity edges. The names of these two cluster types were inspired by this similarity-based view, and they are referred to as globular and transitive clusters, respectively. The various clustering algorithms are generally suited for finding either globular or transitive clusters. In general, clustering-criterion-driven partitional clustering algorithms such as K-means and its variants and agglomerative algorithms using the complete-link or the group-average method are suited for finding globular clusters. On the other hand, the single-link method of the agglomerative algorithm, and graph-partitioning-based clustering algorithms that operate on a nearest-neighbor similarity graph are suited for finding transitive clusters. Finally, specialized algorithms, called subspace clustering methods, have been developed for explicitly finding either globular or transitive clusters by operating directly in the object’s feature space (42–44). 3. Methods for Measuring Similarity Between Objects In general, the method used to compute the similarity between two objects depends on two factors. The first factor has to do with how the objects are actually being represented. For example, the method to measure similarity between two objects represented by a set of attribute-value pairs will be entirely different from the method used to compute the similarity between two DNA sequences or two three-dimensional (3D) protein structures. The second factor is much more subjective and deals with the actual goal of clustering. Different analysis requirements may give rise to entirely different similarity measures and different clustering solutions. This section focuses on discussing various methods for computing the similarity between objects that address both of these factors.

Clustering in Life Sciences

189

The diverse nature of biological sciences and the shear complexity of the underlying physicochemical and evolutionary principles that need to be modeled give rise to numerous clustering problems involving a wide range of different objects. The most prominent of them are the following: 1. Multidimensional vectors: Each object is represented by a set of attribute-value pairs. The meaning of the attributes (also referred to as variables or features) is application dependent and includes data sets like those arising from various measurements (e.g., gene expression data), or from various clinical sources (e.g., drug response, disease states). 2. Sequences: Each object is represented as a sequence of symbols or events. The meaning of these symbols or events also depends on the underlying application and includes objects such as DNA and protein sequences, sequences of secondary structure elements, temporal measurements of various quantities such as gene expressions, and historical observations of disease states. 3. Structures: Each object is represented as a two-dimensional (2D) or 3D structure. The primary examples of such data sets include the spatial distribution of various quantities of interest within various cells, and the 3D geometry of chemical molecules such as enzymes and proteins.

The following sections describe some of the most popular methods for computing the similarity for all these types of objects. 3.1. Similarity Between Multidimensional Objects There are a variety of methods for computing the similarity between two objects that are represented by a set of attribute-value pairs. These methods, to a large extent, depend on the nature of the attributes themselves and the characteristics of the objects that we need to model by the similarity function. From the point of similarity calculations, there are two general types of attributes. The first consists of attributes whose range of values are continuous. This includes both integer- and real-valued variables, as well as attributes whose allowed set of values are thought to be part of an ordered set. Examples of such attributes include gene expression measurements, ages, and disease severity levels. By contrast, the second type consists of attributes that take values from an unordered set. Examples of such attributes include various gender, blood type, and tissue type. We refer to the first type as continuous attributes and to the second type as categorical attributes. The primary difference between these two types of attributes is that in the case of continuous attributes, when there is a mismatch on the value taken by a particular attribute in two different objects, the difference of the two values is a meaningful measure of distance, whereas in categorical attributes, there is no easy way to assign a distance between such mismatches.

190

Zhao and Karypis

Next we present methods for computing the similarity assuming that all the attributes in the objects are either continuous or categorical. However, in most real applications, objects will be represented by a mixture of such attributes, so the described approaches need to be combined. 3.1.1. Continuous Attributes

When all the attributes are continuous, each object can be considered to be a vector in the attribute space. That is, if n is the total number of attributes, then each object v can be represented by an n-dimensional vector (v1, v2, . . . , vn), in which vi is the value of the ith attribute. Given any two objects with their corresponding vector-space representations v and u, a widely used method for computing the similarity between them is to look at their distance as measured by some norm of their vector difference. That is, (1)

in which r is the norm used, and || • || is used to denote vector norms. If the distance is small, then the objects will be similar, and the similarity of the objects will decrease as their distance increases. The two most commonly used norms are the one- and the two-norm. In the case of the one-norm, the distance between two objects is given by (2)

in which | • | denotes absolute values. Similarly, in the case of the two-norm, the distance is given by (3)

Note that the one-norm distance is also called the Manhattan distance, whereas the two-norm distance is nothing more than the Euclidean distance between the vectors. Those distances may become problematic when clustering highdimensional data, because in such data sets, the similarity between two objects is often defined along a small subset of dimensions. An alternate way of measuring the similarity between two objects in the vector-space model is to look at the angle between their vectors. If two objects have vectors that point to the same direction (i.e., their angle is small), then these objects will be considered similar, and if their vectors point to different directions (i.e., their angle is large), then these vectors will be considered dissimilar. This angle-based approach for computing the similarity between two objects emphasizes the relative values that each dimension takes within

Clustering in Life Sciences

191

each vector, and not their overall length. That is, two objects can have an angle of 0 (i.e., point to the identical direction), even if their Euclidean distance is arbitrarily large. For example, in a 2D space, the vectors v = (1, 1), and u = (1000, 1000) will be considered to be identical, since their angle is 0. However, their Euclidean distance is close to 100032. Since the computation of the angle between two vectors is somewhat expensive (requiring inverse trigonometric functions), we do not measure the angle itself but its cosine function. The cosine of the angle between two vectors v and u is given by (4)

This measure will be +1, if the angle between v and u is 0, and –1, if their angle is 180° (i.e., point to opposite directions). Note that a surrogate for the angle between two vectors can also be computed using the Euclidean distance, but instead of computing the distance between v and u directly, we need to first scale them to be of unit length. In that case, the Euclidean distance measures the chord between the two vectors in the unit hypersphere. In addition to the discussed linear algebra–inspired methods, another widely used scheme for determining the similarity between two vectors uses the Pearson correlation coefficient, which is given by (5)

in which –v and u– are the mean of the values of the v and u vectors, respectively. Note that the Pearson correlation coefficient is nothing more than the cosine between the mean-subtracted v and u vectors. As a result, it does not depend on –) vectors, but only on their angle. the length of the (v – v– and (u – u Our discussion so far on similarity measures for continuous attributes has focused on objects in which all the attributes were homogeneous in nature. A set of attributes is called homogeneous if all of the attributes measure quantities that are of the same type. As a result, changes in the values of these variables can be easily correlated across them. Quite often, each object will be represented by a set of inhomogeneous attributes. For example, if we would like to cluster patients, then some of the attributes describing each patient can measure things such as age, weight, height, and calorie intake. Now, if we use some of the described methods to compute the similarity, we will essentially be making the assumption that equal-magnitude changes in all variables are identical. However, this may not be the case. If the age of two patients is 50 yr,

192

Zhao and Karypis

that represents something that is significantly different if their calorie intake difference is 50 calories. To address such problems, the various attributes need to be first normalized prior to using any of the stated similarity measures. Of course, the specific normalization method is attribute dependent, but its goal should be to make differences across different attributes comparable. 3.1.2. Categorical Attributes

If the attributes are categorical, special similarity measures are required, since distances between their values cannot be defined in an obvious manner. The most straightforward way is to treat each categorical attribute individually and define the similarity based on whether two objects contain the exact same value for each categorical attribute. Huang (45) formalized this idea by introducing dissimilarity measures between objects with categorical attributes that can be used in any clustering algorithms. Let X and Y be two objects with m categorical attributes, and Xi and Yi be the values of the ith attribute of the two objects. The dissimilarity measure between X and Y is defined as the number of mismatching attributes of the two objects. That is,

in which

A normalized variant of this dissimilarity is defined as follows: )

(

in which nXi (nYi) is the number of times the value Xi (Yi) appears in the ith attribute of the entire data set. If two categorical values are common across the data set, they will have low weights, so that the mismatch between them will not contribute significantly to the final dissimilarity score. If two categorical values are rare in the data set, then they are more informative and will receive higher weights according to the formula. Hence, this dissimilarity measure emphasizes the mismatches that happen for rare categorical values rather than for those involving common ones. One of the limitations of the preceding method is that two values can contribute to the overall similarity only if they are the same. However, different categorical values may contain useful information in the sense that even if their values are different, the objects containing those values are related to some extent. By defining similarities just based on matches and mismatches of values, some useful information may be lost. A number of approaches have

Clustering in Life Sciences

193

been proposed to overcome this limitation (19,46–48) by utilizing additional information between categories or relationships between categorical values. 3.2. Similarity Between Sequences One of the most important applications of clustering in life sciences is clustering sequences, e.g., DNA or protein sequences. Many clustering algorithms have been proposed to enhance sequence database searching, organize sequence databases, generate phylogenetic trees, guide multiple sequence alignment, and so on. In this specific clustering problem, the objects of interest are biological sequences, which consist of a sequence of symbols, which could be nucleotides, amino acids, or secondary structure elements (SSEs). Biological sequences are different from the objects we have discussed so far, in the sense that they are not defined by a collection of attributes. Hence, the similarity measures we discussed so far are not applicable to biological sequences. Over the years, a number of different approaches have been developed for computing similarity between two sequences (49). The most common are the alignment-based measures, which first compute an optimal alignment between two sequences (either globally or locally), and then determine their similarity by measuring the degree of agreement in the aligned positions of the two sequences. The aligned positions are usually scored using a symbol-to-symbol scoring matrix, and in the case of protein sequences, the most commonly used scoring matrices are PAM (50,51) and BLOSUM (52). The global sequence alignment (Needleman–Wunsch alignment (53)) aligns the entire sequences using dynamic programming. The recurrence relations are the following (49). Given two sequences S1 of length n and S2 of length m, and a scoring matrix S, let score(i, j) be the score of the optimal alignment of prefixes S1[1 . . . i] and S2[1 . . . j]. The base conditions are

and

Then, the general recurrence is

194

Zhao and Karypis

in which _ represents a space, and S is the scoring matrix to specify the matching score for each pair of symbols. And score(n, m) is the optimal alignment score. These global similarity scores are meaningful when we compare similar sequences with roughly the same length, such as protein sequences from the same protein family. However, when sequences are of different lengths and are quite divergent, the alignment of the entire sequences may not make sense, in which case the similarity is commonly defined on the conserved subsequences. This problem is referred to as the local alignment problem, which seeks to find the pair of substrings of the two sequences that has the highest global alignment score among all possible pairs of substrings. Local alignments can be computed optimally via a dynamic programming algorithm, originally introduced by Smith and Waterman (54). The base conditions are score(0, j) = 0 and score(i, 0) = 0, and the general recurrence is given by

The local sequence alignment score corresponds to the cell(s) of the dynamic programming table that has the highest value. Note that the recurrence for local alignments is very similar to that for global alignments only with minor changes, which allow the alignment to begin from any location (i, j) (49). Alternatively, local alignments can be computed approximately via heuristic approaches, such as FASTA (55,56) or BLAST (4). The heuristic approaches achieve low time complexities by first identifying promising locations in an efficient way, and then applying a more expensive method on those locations to construct the final local sequence alignment. The heuristic approaches are widely used for searching protein databases due to their low time complexity. Description of these algorithms is beyond the scope of this chapter; interested readers should follow the references. Most existing protein clustering algorithms use the similarity measure based on the local alignment methods, i.e., Smith–Waterman, BLAST, and FASTA (GeneRage (2), ProtoMap (58), and so on). These clustering algorithms first obtain the pairwise similarity scores of all pairs of sequences. Then they either normalize the scores by the self-similarity scores of the sequences to obtain a percentage value of identicalness (59), or transform the scores to binary values based on a particular threshold (2). Other methods normalize the row similarity scores by taking into account other sequences in the data set. For example, ProtoMage (58) first generates the distribution of the pairwise similarities

Clustering in Life Sciences

195

between sequence A and the other sequences in the database. Then the similarity between sequence A and sequence B is defined as the expected value of the similarity score found for A and B, based on the overall distribution. A low expected value indicates a significant and strong connection (similarity). 3.3. Similarity Between Structures Methods for computing the similarity between the 3D structures of two proteins (or other molecules) are intrinsically different from any of the approaches that we have seen so far for comparing multidimensional objects and sequences. Moreover, unlike the previous data types for which there are well-developed and widely accepted methods for measuring similarities, the methods for comparing 3D structures are still evolving, and the entire field is an active research area. Providing a comprehensive description of the various methods for computing the similarity between two structures requires a chapter (or a book) of its own and is far beyond the scope of this chapter. For this reason, our discussion in the rest of this section primarily focuses on presenting some of the issues involved in comparing 3D structures, in the context of proteins, and outlining some of the approaches that have been proposed for solving them. The reader should refer to Johnson and Lehtonen (60), who provide an excellent introduction on the topic. The general approach, which almost all methods for computing the similarity between a pair of 3D protein structures follows, is to try to superimpose the structure of one protein on top of the structure of the other protein, so that certain key features are mapped very close to each other in space. Once this is done, the similarity between two structures is computed by measuring the fit of the superposition. This fit is commonly computed as the root mean square deviations of the corresponding features. To some extent, this is similar in nature to the alignment performed for sequence-based similarity approaches, but it is significantly more complicated because it involves 3D structures with substantially more degrees of freedom. There are a number of different variations for performing this superposition that deal with the features of the two proteins that are sought to be matched, whether or not the proteins are treated as rigid or flexible bodies, how the equivalent set of features from the two proteins is determined, and the type of superposition that is computed. In principle, when comparing two protein structures, we can treat every atom of each amino acid side chain as a feature and try to compute a superposition that matches all of them as well as possible. However, this usually does not lead to good results because the side chains of different residues will have a different number of atoms with different geometries. Moreover, even the same amino acid types may have side chains with different conformations,

196

Zhao and Karypis

depending on their environment. As a result, even if two proteins have very similar backbones, a superposition computed by looking at all the atoms may fail to identify this similarity. For this reason, most approaches try to superimpose two protein structures by focusing on the C_ atoms of their backbones, whose locations are less sensitive on the actual residue type. Besides these atom-level approaches, other methods focus on SSEs and superimpose two proteins so that their SSEs are geometrically aligned with each other. Most approaches for computing the similarity between two structures treat them as rigid bodies and try to find the appropriate geometric transformation (i.e., rotation and translation) that leads to the best superposition. Rigid-body geometric transformations are well understood and are relatively easy to compute efficiently. However, by treating proteins as rigid bodies, we may get poor superpositions when the protein structures are significantly different, even though they are part of the same fold. In such cases, allowing some degree of flexibility tends to produce better results but also increases the complexity. In trying to find the best way to superimpose one structure on top of the other in addition to the features of interest, we must identify the pairs of features from the two structures that will be mapped against each other. There are two general approaches for doing that. The first approach relies on an initial set of equivalent features (e.g., C_ atoms or SSEs) being provided by domain experts. This initial set is used to compute an initial superposition, and then additional features are identified using various approaches based on dynamic programming or graph theory (53,61,62). The second approach tries to identify automatically the correspondence between the various features by various methods including structural comparisons based on matching C_ atoms contact maps (63), or on the optimal alignment of SSEs (64). Finally, as was the case with sequence alignment, the superposition of 3D structures can be done globally, with the goal of superimposing the entire protein structure, or locally, with the goal of computing a good superposition involving a subsequence of the protein. 4. Assessing Cluster Quality Clustering results are hard to evaluate, especially for high-dimensional data and without a priori knowledge of the objects’ distribution, which is quite common in practical cases. However, assessing the quality of the resulting clusters is as important as generating the clusters. Given the same data set, different clustering algorithms with various parameters or initial conditions will give very different clusters. It is essential to know whether the resulting clusters are valid and how to compare the quality of the clustering results, so that the right clustering algorithm can be chosen and the best clustering results can be used for further analysis.

Clustering in Life Sciences

197

Another related problem is answering the question, How many clusters are there in the data set? An ideal clustering algorithm should be one that can automatically discover the natural clusters present in the data set based on the underlying cluster definition. However, there are no such universal cluster definitions and clustering algorithms suitable for all kinds of data sets. As a result, most existing algorithms require either the number of clusters to be provided as a parameter, as is done in the case of K-means, or a similarity threshold that will be used to terminate the merging process, as in the case of agglomerative clustering. However, in general, it is hard to know the right number of clusters or the right similarity threshold without a priori knowledge of the data set. One possible way to determine automatically the number of clusters k is to compute various clustering solutions for a range of values of k, score the resulting clusters based on some particular metric, and then select the solution that achieves the best score. A critical component of this approach is the method used to measure the quality of the cluster. To solve this problem, numerous approaches have been proposed in a number of different disciplines including pattern recognition, statistics, and data mining. The majority can be classified into two groups: external quality measures and internal quality measures. The approaches based on external quality measures require a priori knowledge of the natural clusters that exist in the data set and validate a clustering result by measuring the agreement between the discovered clusters and the known information. For instance, when clustering gene expression data, the known functional categorization of the genes can be treated as the natural clusters, and the resulting clustering solution will be considered correct, if it leads to clusters that preserve this categorization. A key aspect of the external quality measures is that they utilize information other than that used by the clustering algorithms. However, such reliable a priori knowledge is usually not available when analyzing real data sets—after all, clustering is used as a tool to discover such knowledge in the first place. The basic idea behind internal quality measures is rooted from the definition of clusters. A meaningful clustering solution should group objects into various clusters, so that the objects within each cluster are more similar to each other than the objects from different clusters. Therefore, most of the internal quality measures evaluate the clustering solution by looking at how similar the objects are within each cluster and how well the objects of different clusters are separated. For example, the pseudo F statistic suggested by Calinski and Harabasz (65) uses the quotient between the intracluster average squared distance and intercluster average squared distance. If we have X as the centroid (i.e., mean vector) of all the objects, Xj as the centroid of the objects in cluster Cj, k as the total number of clusters, n as the total number of objects, and d(x, y) as

198

Zhao and Karypis

the squared Euclidean distance between two object vectors x and y, then the pseudo F statistic is defined as follows:

One of the limitations of the internal quality measures is that they often use the same information both in discovering and in evaluating the clusters. Recall from Subheading 2. that some clustering algorithms produce clustering results by optimizing various clustering criterion functions. Now, if the same criterion functions were used as the internal quality measure, then the overall clustering assessment process would do nothing more than assess how effective the clustering algorithm was in optimizing the particular criterion function and would provide no independent confirmation about the degree to which the clusters are meaningful. An alternative way of validating the clustering results is to see how stable they are when adding noise to the data, or subsampling it (66). This approach performs a sequence of subsamplings of the data set and uses the same clustering procedure to produce clustering solutions for various subsamples. These various clustering results are then compared to determine the degree to which they agree. The stable clustering solution should be the one that gives similar clustering results across the different subsamples. This approach can also be easily used to determine the correct number of clusters in hierarchical clustering solutions. The stability test of clustering is performed at each level of the hierarchical tree, and the number of clusters k will be the largest k value that still can produce stable clustering results. Finally, a recent approach, with applications to clustering gene expression data sets, assesses the clustering results of gene expression data by looking at the predictive power for one experimental condition from the clustering results based on the other experimental conditions (67). The key idea behind this approach is that if one condition is left out, then the clusters generated from the remaining conditions should exhibit lower variation in the left-out condition than randomly formed clusters. Yeung et al. (67) defined the figure of merit to be the summation of intracluster variance for each one of the clustering instances in which one of the conditions was not used during clustering (i.e., left-out condition). Among the various clustering solutions, they prefer the one that exhibits the least variation, and their experiments showed that in the context of clustering gene expression data, this method works quite well. The limitation of this approach is that it is not applicable to a data set in which all the attributes are independent. Moreover, this approach is only applicable to

Clustering in Life Sciences

199

low-dimensional data sets, since computing the intracluster variance for each dimension is quite expensive when the number of dimensions is very large. 5. Case Study: Clustering Gene Expression Data Recently developed methods for monitoring genomewide mRNA expression changes such as oligonucleotide chips (68) and cDNA microarrays (69) are especially powerful because they allow us to monitor quickly and inexpensively the expression levels of a large number of genes at different time points for different conditions, tissues, and organisms. Knowing when and under what conditions a gene or a set of genes is expressed often provides strong clues to their biological role and function. Clustering algorithms are used as an essential tool to analyze these data sets and provide valuable insight into various aspects of the genetic machinery. There are four distinct classes of clustering problems that can be formulated from the gene expression data sets, each addressing a different biological problem. The first problem focuses on finding coregulated genes by grouping genes that have similar expression profiles. These coregulated genes can be used to identify promoter elements by finding conserved areas in their upstream regions. The second problem focuses on finding distinctive tissue types by grouping tissues whose genes have similar expression profiles. These tissue groups can then be further analyzed to identify the genes that best distinguish the various tissues. The third clustering problem focuses on finding common inducers by grouping conditions for which the expression profiles of the genes are similar. Finding such groups of common inducers will allow us to substitute different “trigger” mechanisms that still elicit the same response (e.g., similar drugs, or similar herbicides or pesticides). Finally, the fourth clustering problem focuses on finding organisms that exhibit similar responses over a specified set of tested conditions by grouping organisms for which the expression profiles of their genes (in an ortholog sense) are similar. This would allow us to identify organisms with similar responses to chosen conditions (e.g., microbes that share a pathway). Next we briefly review the approaches behind cDNA and oligonucleotide microarrays and discuss various issues related to clustering such gene expression data sets. 5.1. Overview of Microarray Technologies DNA microarrays measure gene expression levels by exploiting the preferential binding of complementary, single-stranded nucleic acid sequences. cDNA microarrays, developed at Stanford University, are glass slides, to which single-stranded DNA (ssDNA) molecules are attached at fixed locations

200

Zhao and Karypis

(spots) by high-speed robotic printing (70). Each array may contain tens of thousands of spots, each of which corresponds to a single gene. mRNA from the sample and from control cells is extracted and cDNA is prepared by reverse transcription. Then, cDNA is labeled with two fluorescent dyes and washed over the microarray so that cDNA sequences from both populations hybridize to their complementary sequences in the spots. The amount of cDNA from both populations bound to a spot can be measured by the level of fluorescence emitted from each dye. For example, the sample cDNA is labeled with a red dye and the control cDNA is labeled with a green dye. Then, if the mRNA from the sample population is in abundance, the spot will be red; if the mRNA from the control population is in abundance, it will be green; if sample and control bind equally, the spot will be yellow; if neither binds, it will appear black. Thus, the relative expression levels of the genes in the sample and control populations can be estimated from the fluorescent intensities and colors for each spot. After transforming the raw images produced by microarrays into relative fluorescent intensity via some image-processing software, the gene expression levels are estimated as log ratios of the relative intensities. A gene expression matrix can be formed by combining multiple microarray experiments of the same set of genes but under different conditions, at which each row corresponds to a gene and each column corresponds to a condition (i.e., a microarray experiment) (70). The Affymetrix GeneChip oligonucleotide array contains several thousand ssDNA oligonucleotide probe pairs. Each probe pair consists of an element containing oligonucleotides that perfectly match the target (PM probe) and an element containing oligonucleotides with a single base mismatch (MM probe). A probe set consists of a set of probe pairs corresponding to a target gene. Similarly, the labeled RNA is extracted from sample cell and hybridizes to its complementary sequence. The expression level is measured by determining the difference between the PM and MM probes. Then, for each gene (i.e., probe set) average difference or log average can be calculated, in which the average difference is defined as the average difference between the PM and MM of every probe pair in a probe set and log average is defined as the average log ratios of the PM/MM intensities for each probe pair in a probe set. 5.2. Preparation and Normalization of Data Many sources of systematic variation may affect the measured gene expression levels in microarray experiments (71). For the GeneChip experiments, scaling/normalization must be performed for each experiment before combining them, so that they can have the same target intensity. The scaling factor of each experiment is determined by the array intensity of the experiment and

Clustering in Life Sciences

201

the common target intensity, in which the array intensity is a composite of the average difference intensities across the entire array. For cDNA microarray experiments, two fluorescent dyes are involved and cause more systematic variation, which makes normalization more important. In particular, this variation could be caused by differences in RNA amounts, differences in labeling efficiency between the two fluorescent dyes, and image acquisition parameters. Such biases can be removed by a constant adjustment to each experiment to force the distribution of the log ratios to have a median of zero. Since an experiment corresponds to one column in the gene expression array, this global normalization can be done by subtracting the mean/median of the gene expression levels of one experiment from the original values, so that the mean value for this experiment (column) is 0. However, there are other sources of systematic variation that global normalization may not be able to correct. Yang et al. (71) pointed out that dye biases can depend on a spot’s overall intensity and location on the array. Given the red and green fluorescence intensities (R, G) of all the spots in one slide, they plotted the log intensity ratio M = log R/G vs the mean log intensity A = log 3RG, which shows clear dependence of the log ratio M on overall spot intensity A. Hence, an intensity-related normalization was proposed, in which the original log ratio log R/G is subtracted by C(A). C(A) is a scatter plot smoother fit to the M vs A plot using robust locally linear fits. 5.3. Similarity Measures In most microarray clustering applications our goal is to find clusters of genes and/or clusters of conditions. Several different methods have been proposed for computing these similarities, including Euclidean distance-based similarities, correlation coefficients, and mutual information. The use of correlation coefficient–based similarities is primarily motivated by the fact that while clustering gene expression data sets, we are interested on how the expression levels of different genes are related under various conditions. The correlation coefficient values between genes (Eq. 5) can be used directly or transformed to absolute values if genes of both positive and negative correlations are important in the application. An alternate way of measuring the similarity is to use the mutual information between a pair of genes. The mutual information between two information sources A and B represents how much information the two sources contain for each other. D’ haeseleer et al. (72) used mutual information to define the relationship between two conditions A and B. This was done by initially discretizing the gene expression levels into various bins, and using this discretization to compute the Shannon entropy of conditions A and B as follows:

202

Zhao and Karypis

in which pi is the frequency of each bin. Given these entropy values, the mutual information between A and B is defined as A feature common to many similarity measures used for microarray data is that they almost never consider the length of the corresponding gene or condition vectors, (i.e., the actual value of the differential expression level), but focus only on various measures of relative change and/or how these relative measures are correlated between two genes or conditions (67,73,74). The reason for this is twofold. First, there are still significant experimental errors in measuring the expression level of a gene, and it is not reliable to use it “as is.” Second, in most cases we are only interested in how the different genes change across the different conditions (i.e., either up- or downregulated), and we are not interested in the exact amount of this change. 5.4. Clustering Approaches for Gene Expression Data Since the early days of the development of microarray technologies, a wide range of existing clustering algorithms have been used, and novel new approaches have been developed for clustering gene expression data sets. The most effective traditional clustering algorithms are based either on the group-average variation of the agglomerative clustering methodology, or on the K-means approach applied to unit-length gene or condition expression vectors. Unlike other applications of clustering in life sciences, such as the construction of phylogenetic trees, or guide trees for multiple sequence alignment, there is no biological reason that justifies that the structure of the correct clustering solution is in the form of a tree. Thus, agglomerative solutions are inherently suboptimal when compared to partitional approaches, which allow for a wider range of feasible solutions at various levels of cluster granularity. However, the agglomerative solutions do tend to produce reasonable and biologically meaningful results and allow easy visualization of the relationships between the various genes and/or conditions in the experiments. The ease of visualizing the results has also led to the extensive use of selforganizing maps (SOMs) for gene expression clustering (74,51). The SOM method starts with a geometry of “nodes” of a simple topology (e.g., grid and ring) and a distance function on the nodes. Initially, the nodes are mapped randomly into the gene expression space, in which the ith coordinate represents the expression level in the ith condition. At each following iteration, a data point P, i.e., a gene expression profile, is randomly selected and the data point P will attract nodes to itself. The nearest node Np to P will be identified and

Clustering in Life Sciences

203

moved the most, and other nodes will be adjusted depending on their distances to the nearest node Np toward the data point P. The advantages of using SOMs are their structured approach, which makes visualization very easy. However, SOMs require the user to specify the number of clusters as well as the grid topology, including the dimensions of the grid and the number of clusters in each dimension. From the successes obtained in using K means and group-average-based clustering algorithms, as well as other similar algorithms (76,77), it appears that the clusters in the context of gene expression data sets are globular in nature. This should not be surprising since researchers are often interested in obtaining clusters whose genes have similar expression patterns/profiles. Such a requirement automatically lends itself to globular clusters, in which the pairwise similarity between most object pairs is quite high. However, as the dimensionality of these data sets continues to increase (primarily by increasing the number of conditions that are analyzed), requiring consistency across the entire set of conditions will be unrealistic. As a result, approaches that try to find tight clusters in subspaces of these conditions may gain popularity. 6. CLUTO: A Clustering Toolkit We now turn our focus on providing a brief overview of CLUTO (release 2.0), a software package for clustering low- and high-dimensional data sets and for analyzing the characteristics of the various clusters, that was developed by our group and is available at www.cs.umn.edu/~karypis/cluto. CLUTO was developed as a general purpose clustering toolkit. CLUTO’s distribution consists of stand-alone programs (vcluster and cluster) for clustering and analyzing these clusters, as well as a library via which an application program can access directly the various clustering and analysis algorithms implemented in CLUTO. To date, CLUTO has been successfully used to cluster data sets arising in many diverse application areas including information retrieval, commercial data sets, scientific data sets, and biological applications. CLUTO implements three different classes of clustering algorithms that can operate either directly in the object’s feature space or in the object’s similarity space. The clustering algorithms provided by CLUTO are based on the partitional, agglomerative, and graph-partitioning paradigms. CLUTO’s partitional and agglomerative algorithms are able to find clusters that are primarily globular, whereas its graph-partitioning and some of its agglomerative algorithms are capable of finding transitive clusters. A key feature in most of CLUTO’s clustering algorithms is that they treat the clustering problem as an optimization process that seeks to maximize or minimize a particular clustering criterion function defined either globally or locally over the entire clustering solution space. CLUTO provides a total of seven

204

Zhao and Karypis

Table 1 Mathematical Definition of CLUTO’s Clustering Criterion Functionsa Criterion function

Optimization function

I1

(6)

I2

(7)

E1

(8)

G1

(9)

Gv1

(10)

H1

maximize

I1 —— E1

(11)

H2

maximize

I2 —— E1

(12)

aThe

notation in these equations is as follows: k is the total number of clusters, S is the total objects to be clustered, Si is the set of objects assigned to the ith cluster, ni is the number of objects in the ith cluster, v and u represent two objects, and sim(v, u) is the similarity between two objects.

different criterion functions that have been shown to produce high-quality clusters in low- and high-dimensional data sets. The equations of these criterion functions are shown in Table 1, and they were derived and analyzed in (refs. 30 and 78). In addition to these criterion functions, CLUTO provides some of the more traditional local criteria (e.g., single link, complete link, and group average) that can be used in the context of agglomerative clustering. An important aspect of partitional-based criterion-driven clustering algorithms is the method used to optimize this criterion function. CLUTO uses a randomized incremental optimization algorithm that is greedy in nature, has low computational requirements, and produces high-quality clustering solutions (30). Moreover, CLUTO’s graph-partitioning-based clustering algorithms utilize high-quality and efficient multilevel graph-partitioning algorithms derived from the METIS and hMETIS graph and hypergraph partitioning algorithms (79,80). Moreover, CLUTO’s algorithms have been optimized for operating on very large data sets both in terms of the number of objects and in the number

Clustering in Life Sciences

205

of dimensions. This is especially true for CLUTO’s algorithms for partitional clustering. These algorithms can quickly cluster data sets with several tens of thousands of objects and several thousands of dimensions. Moreover, since most high-dimensional data sets are very sparse, CLUTO directly takes into account this sparsity and requires memory that is roughly linear on the input size. In the rest of this section, we present a short description of CLUTO’s standalone programs followed by some illustrative examples of how it can be used for clustering biological datasets. 6.1. Usage Overview The vcluster and scluster programs are used to cluster a collection of objects into a predetermined number of clusters k. The vcluster program treats each object as a vector in a high-dimensional space, and it computes the clustering solution using one of five different approaches. Four of these approaches are partitional in nature, whereas the fifth approach is agglomerative. On the other hand, the scluster program operates on the similarity space between the objects but can compute the overall clustering solution using the same set of five different approaches. Both the vcluster and scluster programs are invoked by providing two required parameters on the command line along with a number of optional parameters. Their overall calling sequence is as follows: vcluster scluster

[optional parameters] [optional parameters]

MatrixFile Nclusters GraphFile Nclusters

MatrixFile is the name of the file that stores the n objects that need to be clustered. In vcluster, each of these objects is considered to be a vector in an m-dimensional space. The collection of these objects is treated as an n × m matrix, whose rows correspond to the objects, and whose columns correspond to the dimensions of the feature space. Similarly, GraphFile is the name of the file that stores the adjacency matrix of the similarity graph between the n objects to be clustered. The second argument for both programs, Nclusters, is the number of clusters that is desired. Figure 1 shows the output of vcluster for clustering a matrix into 10 clusters. We see that vcluster initially prints information about the matrix, such as its name, the number of rows (#Rows), the number of columns (#Columns), and the number of nonzeros in the matrix (#NonZeros). Next, it prints information about the values of the various options that it used to compute the clustering, and the number of desired clusters (#Clusters). Once it computes the clustering solution, it displays information regarding the quality of the overall clustering solution, as well as the quality of each cluster, using a variety of internal quality

206

Zhao and Karypis

Fig. 1. Output of vcluster for matrix sports.mat and a 10-way clustering.

measures. These measures include the average pairwise similarity between each object of the cluster and its standard deviation (ISim and ISdev), and the average similarity between the objects of each cluster to the objects in the other clusters and their standard deviation (ESim and ESdev). Finally, vcluster reports the time taken by the various phases of the program. 6.2. Summary of Biologically Relevant Features The behavior of vcluster and scluster can be controlled by specifying more than 30 different optional parameters. These parameters can be broadly categorized into three groups. The first group controls various aspects of the clustering algorithm, the second group controls the type of analysis and reporting that is performed on the computed clusters, and the third group controls the visualization of the clusters. Some of the most important parameters are

Clustering in Life Sciences

207

Table 2 Key Parameters of CLUTO’s Clustering Algorithms Parameter -clmethod -sim -crfun -agglofrom -fulltree -showfeatures

Values rb, direct, agglo, graph cos, corr, dist I1, I2, E1, G1, Gv1, H1, H2, slink, wslink, clink, wclink, upgma (int)

-showtree -labeltree -plottree -plotmatrix -plotclusters

(filename) (filename) (filename)

-clustercolumn

Function Clustering method Similarity measures Criterion function Where to start agglomeration Builds a tree within each cluster Displays cluster’s feature signature Builds a tree on top of clusters Provides key features for each tree node Plots agglomerative tree Plots input matrices Plots cluster-cluster matrix

Simultaneously clusters the features

shown in Table 2 and are described in the context of clustering biological data sets in the rest of the chapter. 6.3. Clustering Algorithms The -clmethod parameter controls the type of algorithms to be used for clustering. The first two methods, (“rb” and “direct”) follow the partitional paradigm described in Subheading 2.1. The difference between them is the method that they use to compute the k-way clustering solution. In the case of “rb,” the k-way clustering solution is computed via a sequence of repeated bisections, whereas in the case of “direct,” the entire k-way clustering solution is computed at one step. CLUTO’s traditional agglomerative algorithm is implemented by the “agglo” option, whereas the “graph” option implements a graph-partitioningbased clustering algorithm that is well suited for finding transitive clusters. The method used to define the similarity between the objects is specified by the -sim parameter and supports the cosine (“cos”), correlation coefficient (“corr”), and a Euclidean distance-derived similarity (“dist”). The clustering criterion function that is used by the partitional and agglomerative algorithms is controlled by the -crfun parameter. The first seven criterion functions (described in Table 1) are used by both partitional and agglomerative, whereas the last five (single link, weighted single link, complete link, weighted complete link, and group average) are only applicable to agglomerative clustering.

208

Zhao and Karypis

A key feature of CLUTO’s is that it allows you to combine partitional and agglomerative clustering approaches. This is done by the -agglofrom parameter in the following way. The desired k-way clustering solution is computed by first clustering the data set into m clusters (m > k) and then uses an agglomerative algorithm to group some of these clusters to form the final k-way clustering solution. The number of clusters m is the value supplied to -agglofrom. This approach was motivated by the two-phase clustering approach of the CHAMELEON algorithm (20) and was designed to allow the user to compute a clustering solution that uses a different clustering criterion function for the partitioning phase from that used for the agglomeration phase. An application of such an approach is to allow the clustering algorithm to find nonglobular clusters. In this case, the partitional clustering solution can be computed using a criterion function that favors globular clusters (e.g., “i2”), and then combine these clusters using a single-link approach (e.g., “wslink”) to find nonglobular but well-connected clusters. 6.4. Building Tree for Large Data Sets Hierarchical agglomerative trees are used extensively in life sciences because they provide an intuitive way to organize and visualize the clustering results. However, there are two limitations with such trees. First, hierarchical agglomerative clustering may not be the optimal way to cluster data in which there is no biological reason to suggest that the objects are related to each other in a tree fashion. Second, hierarchical agglomerative clustering algorithms have high computational and memory requirements, making them impractical for data sets with more than a few thousand objects. To address these problems CLUTO provides the -fulltree option that can be used to produce a complete tree using a hybrid of partitional and agglomerative approaches. In particular, when -fulltree is specified, CLUTO builds a complete hierarchical tree that preserves the clustering solution that was computed. In this hierarchical clustering solution, the objects of each cluster form a subtree, and the different subtrees are merged to get an all-inclusive cluster at the end. Furthermore, the individual trees are combined in a meaningful way, so that the similarities within each tree are accurately represented. Figure 2 shows the trees produced on a sample gene expression data set. The first tree (Fig. 2A) was obtained using the agglomerative clustering algorithm, whereas the second tree (Fig. 2B) was obtained using the repeated-bisecting method in which the -fulltree was specified. 6.5. Analyzing the Clusters In addition to the core clustering algorithms, CLUTO provides tools to analyze each of the clusters and identify the features that best describe and discriminate

Fig. 2. (A) Clustering solution produced by agglomerative method; (B) clustering solution produced by repeated-bisecting method and -fulltree.

Clustering in Life Sciences 209

210

Zhao and Karypis

Fig. 3. Output of vcluster for matrix sports.mat and a 10-way clustering that shows descriptive and discriminating features of each cluster.

Clustering in Life Sciences

211

each one of the clusters. To some extent, these analysis methods try to identify the dense subspaces in which each cluster is formed. This is accomplished by the -showfeatures and -labeltree parameters. Figure 3 shows the output produced by vcluster when -showfeatures was specified for a data set consisting of protein sequences and the 5mers that they contain. We can see that the set of descriptive and discriminating features are displayed right after the table that provides statistics for the various clusters. For each cluster, vcluster displays three lines of information. The first line contains some basic statistics for each cluster corresponding to the cluster-id (cid), number of objects in each cluster (Size), average pairwise similarity between the cluster’s objects (ISim), and average pairwise similarity to the rest of the objects (ESim). The second line contains the five most descriptive features, whereas the third line contains the five most discriminating features. The features in these lists are sorted in decreasing descriptive or discriminating order. Right next to each feature, vcluster displays a number that in the case of the descriptive features is the percentage of the within-cluster similarity that this particular feature can explain. For example, for the 0th cluster, the 5mer “GTSMA” explains 58.5% of the average similarity between the objects of the 0th cluster. A similar quantity is displayed for each of the discriminating features and is the percentage of the dissimilarity between the cluster and the rest of the objects that this feature can explain. In general, there is a large overlap between descriptive and discriminating features, with the only difference being that the percentages associated with the discriminating features are typically smaller than the corresponding percentages of the descriptive features. This is because some of the descriptive features of a cluster may also be present in a small fraction of the objects that do not belong to the cluster. 6.6. Visualizing the Clusters CLUTO’s programs can produce a number of visualizations that can be used to see the relationships among the clusters, objects, and features. You have already seen one of them in Fig. 2 that was produced by the -plotmatrix parameter. The same parameter can be used to visualize sparse high-dimensional data sets. This is illustrated in Fig. 4A for the protein data set used earlier. As we can see from that plot, vcluster shows the rows of the input matrix reordered in such a way that the rows assigned to each of the 10 clusters are numbered consecutively. The columns of the displayed matrix are selected to be the union of the most descriptive and discriminating features of each cluster and are ordered according to the tree produced by an agglomerative clustering of the columns. In addition, at the top of each column, the label of each feature is shown. Each nonzero positive element of the matrix is displayed by a different

212

Zhao and Karypis

Fig. 4. Various visualizations generated by the -plotmatrix (A) and -plotclusters (B) parameters.

Clustering in Life Sciences

213

shade of red. Entries that are bright red correspond to large values and the brightness of the entries decreases as their value decreases. Also note that in this visualization both the rows and columns have been reordered using a hierarchical tree. Finally, Fig. 4B shows the type of visualization that can be produced when -plotcluster is specified for a sparse matrix. This plot shows the clustering solution shown in Fig. 4A by replacing the set of rows in each cluster by a single row that corresponds to the centroid vector of the cluster. The -plotcluster option is particularly useful for displaying very large data sets, since the number of rows in the plot is only equal to the number of clusters. References 1. Linial, M., Linial, N., Tishby, J., and Golan, Y. (1997) Global self-organization of all known protein sequences reveals inherent biological structures. J. Mol. Biol. 268, 539–556. 2. Enright, A. J. and Ouzounis, C. A. (2000) GeneRAGE: a robust algorithm for sequence clustering and domain detection. Bioinformatics 16(5), 451–457. 3. Mian, I. S. and Dubchak, I. (2000) Representing and reasoning about protein families using generative and discriminative methods. J. Comput. Biol. 7(6), 849–862. 4. Spang, R. and Vingron, M. (2001) Limits of homology of detection by pairwise sequence comparison. Bioinformatics 17(4), 338–342. 5. Kriventseva, E., Biswas, M., and Apweiler, R. (2001) Clustering and analysis of protein families. Curr. Opin. Struct. Biol. 11, 334–339. 6. Eidhammer, I., Jonassen, I., and Taylor, W. R. (2000) Structure comparison and stucture patterns. J. Comput. Biol. 7, 685–716. 7. Shatsky, M., Fligelman, Z. Y., Nussinov, R., and Wolfson, H. J. (2000) Alignment of flexible protein structures, in Proceedings of the 8th International Conference on Intelligent Systems for Molecular Biology, (Altman, R., et al., eds.), AAAI Press, Menlo Park, CA, pp. 329–343. 8. Lee, R. C. T. (1981) Clustering analysis and its applications, in Advances in Information Systems Science (Toum, J. T., ed.), Plenum, New York. 9. Jain, A. K. and Dubes, R. C. (1988) Algorithms for Clustering Data, Prentice Hall, 1998. 10. Cheeseman, P. and Stutz, J. (1996) Bayesian classification (autoclass): theory and results, in Advances in Knowledge Discovery and Data Mining (Fayyad, U. M., Piatetsky-Shapiro, G., Smith, P., and Uthurusamy, R., eds.), AAAI/MIT Press, pp. 153–180. 11. Kaufman, L. and Rousseeuw, P. J. (1990) Finding Groups in Data: An Introduction to Cluster Analysis, John Wiley & Sons, New York. 12. Jackson, J. E. (1991) A User’s Guide to Principal Components, John Wiley & Sons, New York.

214

Zhao and Karypis

13. Ng, R. and Han, J. (1994) Efficient and effective clustering method for spatial data mining, in Proceedings of the 20th VLDB Conference (Bocca, J. B., Jarke, M., and Zaniolo, C., eds.), San Francisco, CA, pp. 144–155. 14. Berry, M. W., Dumais, S. T., and O’Brien, G. W. (1995) Using linear algebra for intelligent information retrieval. SIAM Rev. 37, 573–595. 15. Zhang, T., Ramakrishnan, R., and Linvy, M. (1996) Birch: an efficient data clustering method for large databases, in Proceedings of 1996 ACM-SIGMOD International Conference on Management of Data, ACM Press, New York, NY, pp. 103–114. 16. Ester, M., Kriegel, H.-P., Sander, J., and Xu, X. (1996) A density-based algorithm for discovering clusters in large spatial databases with noise, in Proceedings of the Second International Conference on Knowledge Discovery and Data Mining (Simoudis, E., Han, J., and Fayyad, U., eds.), AAAI Press, Menlo Park, CA, pp. 226–231. 17. Wang, X., Wang, J. T. L., Shasha, D., Shapiro, B., Dikshitulu, S., Rigoutsos, I., and Zhang, K. (1997) Automated discovery of active motifs in three dimensional molecules, in Proceedings of the 3rd International Conference on Knowledge Discovery and Data Mining (Heckerman, D., Mannila, H., Pregibon, D., and Uthurusamy, R., eds.), AAAI Press, Menlo Park, CA, pp. 89–95. 18. Guha, S., Rastogi, R., and Shim, K. (1998) CURE: an efficient clustering algorithm for large databases, in Proceedings of 1998 ACM-SIGMOD International Conference on Management of Data, ACM Press, New York, NY, pp. 73–84. 19. Guha, S., Rastogi, R., and Shim, K. (1999) ROCK: a robust clustering algorithm for categorical attributes, in Proceedings of the 15th International Conference on Data Engineering, IEEE, Washington-Brussels-Tokyo, pp. 512–521. 20. Karypis, G., Han, E. H., and Kumar, V. (1999) Chameleon: a hierarchical clustering algorithm using dynamic modeling. IEEE Comput. 32(8), 68–75. 21. Jain, A. K., Murty, M. N., and Flynn, P. J. (1999) Data clustering: a review. ACM Comput. Surv. 31(3), 264–323. 22. Han, J., Kamber, M., and Tung, A. K. H. (2001) Spatial clustering methods in data mining: a survey, in Geographic Data Mining and Knowledge Discovery (Miller, H. and Han, J., eds.), Taylor & Francis. 23. MacQueen, J. (1967) Some methods for classification and analysis of multivariate observations, in Proceedings of the 5th Symposium Math. Statist. Prob., pp. 281–297. 24. Dempster, A. P., Laird, N. M., and Rubin, D. B. (1977) Maximum likelihood from incomplete data via the em algorithm. J. Roy. Stat. Soc. 39. 25. Zahn, K. (1971) Graph-theoretical methods for detecting and describing gestalt clusters. IEEE Trans. Comput. (C-20), 68–86. 26. Han, E. G., Karypis, G., Kumar, V., and Mobasher, B. (1998) Hypergraph based clustering in high-dimensional data sets: a summary of results. Bull. Tech. Committee Data Eng. 21(1). 27. Strehl, A. and Ghosh, J. (2000) Scalable approach to balanced, high-dimensional clustering of market-baskets, in Proceedings of HiPC, Springer Verlag, pp. 525–536.

Clustering in Life Sciences

215

28. Boley, D. (1998) Principal direction divisive partitioning. Data Mining Knowl. Discov. 2(4), 29. Duda, R. O., Hart, P. E., and Stork, D. G. (2001) Pattern Classification, John Wiley & Sons, New York. 30. Zhao, Y. and Karypis, G. (2001) Criterion functions for document clustering: experiments and analysis. Technical report TR #01–40, Department of Computer Science, University of Minnesota, Minneapolis. Available at http://cs.umn.edu/ ~karypis/publications. 31. Sneath, P. H. and Sokal, R. R. (1973) Numerical Taxonomy, Freeman, London, UK. 32. King, B. (1967) Step-wise clustering procedures. J. Am. Stat. Assoc. 69, 86–101. 33. Johnson, M. S., Sutcliffe, M. J., and Blundell, T. L. (1990) Molecular anatomy: phyletic relationships derived from 3-dimensional structures of proteins. J. Mol. Evol. 30, 43–59. 34. Taylor, W. R., Flores, T. P., and Orengo, C. A. (1994) Multiple protein structure alignment. Protein Sci. 3, 1858–1870. 35. Jonyer, I., Holder, L. B., and Cook, D. J. (2000) Graph-based hierarchical conceptual clustering in structural databases. Int. J. Artific. Intell. Tools. 36. Eddy, S. R. (1996) Hidden markov models. Curr. Opin. Struct. Biol. 6, 361–365. 37. Eddy, S. R. (1998) Profile hidden markov models. Bioinformatics 14, 755–763. 38. Aggarwal, C. C., Gates, S. C., and Yu, P. S. (1999) On the merits of building categorization systems by supervised clustering, Proceedings of the Fifth ACM SIGKDD International Conference on Knowledge Discovery and Data Mining (Chaudhuri, S. and Madigan, D., eds.), ACM Press, New York, NY, pp. 352–356. 39. Cutting, D. R., Pedersen, J. O., Karger, D. R., and Tukey, J. W. (1992) Scatter/ gather: a cluster-based approach to browsing large document collections, in Proceedings of the ACM SIGIR, ACM Press, New York, NY, pp. 318–329. 40. Larsen, B. and Aone, C. (1999) Fast and effective text mining using linear-time document clustering, in Proceedings of the Fifth ACM SIGKDD International Conference on Knowledge Discovery and Data Mining (Chaudhuri, S. and Madigan, D., eds.), ACM Press, New York, NY, pp. 16–22. 41. Steinbach, M., Karypis, G., and Kumar, V. (2000) A comparison of document clustering techniques, in KDD Workshop on Text Mining, ACM Press, New York, NY, pp. 109–110. 42. Agrawal, R., Gehrke, J., Gunopulos, D., and Raghavan, P. (1998) Automatic subspace clustering of high dimensional data for data mining applications, in Proceedings of 1998 ACM-SIGMOD International Conference on Management of Data, ACM Press, New York, NY, pp. 94–105. 43. Burdick, D., Calimlim, M., and Gehrke, J. (2001) Mafia: a maximal frequent itemset algorithm for transactional databases, in Proceedings of the 17th International Conference on Data Engineering, IEEE, Washington-Brussels-Tokyo, pp. 443–452. 44. Nagesh, H., Goil, S., and Choudhary, A. (1999) Mafia: efficient and scalable subspace clustering for very large data sets. Technical report TR #9906-010, Northwestern University.

216

Zhao and Karypis

45. Huang, Z. (1997) A fast clustering algorithm to cluster very large categorical data sets in data mining, in Proceedings of SIGMOD Workshop on Research Issues on Data Mining and Knowledge Discovery, Tucson, Arizona. 46. Ganti, V., Gehrke, J., and Ramakrishnan, R., (1999) Cactus-clustering categorical data using summaries, in Proceedings of the 5th International Conference on Knowledge Discovery and Data Mining (Chaudhuri, S. and Madigan, D., eds.), ACM Press, New York, NY, pp. 73–83. 47. Gibson, D., Kleinberg, J., and Rahavan, P. (1998) Clustering categorical data: an approach based on dynamical systems, in Proceedings of the 24th International Conference on Very Large Databases (Gupta, A., Shmueli, O., and Widom, J., eds.), pp. 311–323, San Francisco, CA, Morgan Kaufmann. 48. Ryu, T. W. and Eick, C. F. (1998) A unified similarity measure for attributes with set or bag of values for database clustering, in The 6th International Workshop on Rough Sets, Data Mining and Granular Computing, Research Triangle Park, NC. 49. Gusfield, D. (1997) Algorithms on Strings, Trees, and Sequences: Computer Science and Computational Biology, Cambridge University Press, NY. 50. Dayhoff, M. O., Schwartz, R. M., and Orcutt, B. C. (1978) A model of evolutionary change in proteins. Atlas Protein Sequence Struct. 5, 345–352. 51. Schwartz, R. M. and Dayhoff, M. O. (1978) Matrices for detecting distant relationships. Atlas Protein Sequence Struct. 5, 353–358. 52. Henikoff, S. and Henikoff, J. G. (1992) Amino acid substitution matrices from protein blocks. Proc. Natl. Acad. Sci. USA 89, 10,915–10,919. 53. Needleman, S. B. and Wunsch, C. D. (1970) A general method applicable to the search for similarities in the amino acid sequence of two proteins. J. Mol. Biol. 48, 443–453. 54. Smith, T. F. and Waterman, M. S. (1981) Identification of common molecular subsequences. J. Mol. Biol. 147, 195–197. 55. Lipman, D. J. and Pearson, W. R. (1985) Rapid and sensitive protein similarity searches. Science 227, 1435–1441. 56. Pearson, W. R. and Lipman, D. J. (1988) Improved tools for biological sequence comparison. Proc. Natl. Acad. Sci. USA 85, 2444–2448. 57. Altschul, S., Gish, W., Miller, W., Myers, E., and Lipman, D. (1990) Basic local alignment search tool. J. Mol. Biol. 215, 403–410. 58. Yona, G., Linial, N., and Linial, M. (2000) Protomap: automatic classification of protein sequences and hierarchy of protein families. Nucleic Acids Res. 28, 49–55. 59. Bolten, E., Schliep, A., Schneckener, S., Schomburg, D., and Schrader, R. (2001) Clustering protein sequences-structure prediction by transitive homology. Bioinformatics 17, 935–941. 60. Johnson, M. S. and Lehtonen, J. V. (2000) Comparison of protein three dimensional structure, in Bioinformatics: Sequences, Structure and Databanks (Higgins, D, eds.), Oxford University Press, 2000. 61. Grindley, H. M., Artymiuk, P. J., Rice, D. W., and Willet, P. (1993) Identification of tertiary structure resemblance in proteins using a maximal common subgraph isomorphism algorithm. J. Mol. Biol. 229, 707–721.

Clustering in Life Sciences

217

62. Mitchell, E. M., Artymiuk, P. J., Rice, D. W., and Willet, P. (1989) Use of techniques derived from graph theory to compare secondary structure motifs in proteins. J. Mol. Biol. 212, 151–166. 63. Holm, L. and Sander, C. (1993) Protein structure comparison by alignment of distance matrices. J. Mol. Biol. 233, 123. 64. Kleywegt, G. J. and Jones, T. A. (1997) Detecting folding motifs and similarities in protein structures. Methods Enzymol. 277, 525–545. 65. Calinski, T. and Harabasz, J. (1974) A dendrite method for cluster analysis. Commun. Stat. 3, 1–27. 66. Ben-Hur, A., Elisseeff, A., and Guyon, I. (2000) A stability based method for discovering structure in clustered data, in Pacific Symposium on Biocomputing, vol. 7, World Scientific Press, Singapore, pp. 6–17. 67. Yeung, K. Y., Haynor, D. R., and Ruzzo, W. L. (2001) Validating clustering for gene expression data. Bioinformatics 17(4), 309–318. 68. Fodor, S. P., Rava, R. P., Huang, X. C., Pease, A. C., Holmes, C. P., and Adams, C. L. (1993) Multiplexed biochemical assays with biological chips. Nature 364, 555, 556. 69. Schena, M., Shalon, D., Davis, R. W., and Brown, P. O. (1995) Quantitative monitoring of gene expression patterns with a complementary DNA microarray. Science 270. 70. Brazma, A., Robinson, A., Cameron, G., and Ashburner, M. (2000) One-stop shop for microarray data. Nature 403, 699–701. 71. Yang, Y. H., Dudoit, S., Luu, P., and Speed, T. P. (2001) Normalization for cDNA microarray data, in Proceedings of SPIE International Biomedical Optics Symposium (Bittner, M. L., Chen, Y., Dorsel, A. N., and Dougherty, E. R., eds.), vol. 4266, SPIE, Bellingham, WA, pp. 141–152. 72. D’Haeseleer, P., Fuhrman, S., Wen, X., and Somogyi, R. (1998) Mining the gene expression matrix: inferring gene relationships from large scale gene expression data, in, Information Processing in Cells and Tissues, Plenum, New York, pp. 203–212. 73. Eisen, M. (2000) Cluster 2.11 and treeview 1.50 http://rana.lbl.gov/Eisen Software.htm. 74. Tamayo, P., Slonim, D., Mesirov, J., Zhu, Q., Kitareewan, S., Dmitrovsky, E., Lander, E. S., and Golub, T. R. (1999) Interpreting patterns of gene expression with self-organizing maps: methods and application to hematopoietic differentiation. Proc. Natl. Acad. Sci. USA 96, 2907–2912. 75. Kohonen, T. Self-Organizing Maps, Springer-Verlag, Berlin, 1995. 76. Ben-Dor, A. and Yakhini, Z. (1999) Clustering gene expression patterns, in Proceedings of the 3rd Annual International Conference on Research in Computational Molecular Biology, ACM Press, New York, NY, pp. 33–42. 77. Shamir, R. and Sharan, R. (2000) Click: a clustering algorithm for gene expression analysis, in Proceedings of the 8th International Conference on Intelligent Systems for Molecular Biology (Altman, R., et al., eds.), AAAI Press, Menlo Park, CA, pp. 307–316.

218

Zhao and Karypis

78. Zhao, Y. and Karypis, G. (2002) Comparison of agglomerative and partitional document clustering algorithms, in SIAM (2002) Workshop on Clustering HighDimensional Data and Its Applications. Arlington, VA. Also available as technical report #02-014, University of Minnesota. 79. Karypis, G. and Kumar, V. (1998) hMETIS 1.5: a hypergraph partitioning package. Technical report, Department of Computer Science, University of Minnesota. Available at www-users.cs.umn.edu/~karypis/metis 80. Karypis, G. and Kumar, V. (1998) METIS 4.0: unstructured graph partitioning and sparse matrix ordering system. Technical report, department of Computer Science, University of Minnesota. Available at www-users.cs.umn.edu/~karypis/metis

Primer on the Visualization of Microarray Data

219

14 A Primer on the Visualization of Microarray Data Paul Fawcett 1. Introduction DNA microarrays represent a powerful technology offering unprecedented scope for discovery (1). However, the ability to measure, in parallel, the gene expression patterns for thousands of genes represents both the strength and a key weakness of microarrays. One of the central challenges of functional genomics has been to cope with the enormity of microarray data sets, and, indeed, the usefulness of microarrays has been limited by our ability to extract useful information from these data. In general terms, analyzing microarray data requires a series of numerical transformations and/or filters intended to extract from the data set the subset of represented genes that may be of interest. The resulting lists generally represent genes with large variance or periodicity within their gene expression vectors (2); high fold inductions over a time course (3); genes that are considered significant by some statistical criterion (4); or genes that meet some other threshold, such as exceeding a given percentile rank in the distribution of ratios (5,6). However, examining a spreadsheet of gene names and expression ratios often provides little insight into the interesting trends or patterns that may exist within the data. Rather, methods have been developed for both the classification and display of these data sets. Indeed, given the non-hypothesis-driven nature of many microarray experiments, the ability to readily visualize trends in the data assumes paramount importance. The goal of this chapter is therefore to provide an overview and introduction to some of the software packages developed in the Brown and Botstein laboratories at Stanford University for the visual display of microarray data, and to introduce the reader to these methods using straightforward and nonmathematical language. It is not our goal to discuss the previously mentioned transformations or filters required to determine the genes of interest From: Methods in Molecular Biology: vol. 224: Functional Genomics: Methods and Protocols Edited by: M. J. Brownstein and A. Khodursky © Humana Press Inc., Totowa, NJ

219

220

Fawcett

but, rather, to discuss how data may be explored once these preliminary steps have been applied. Also introduced, for the first time, is a new tool, DecCor2, designed to allow the genome-order display of aggregate microarray data. 1.1. A Note on Gene Expression Data Array data are invariably expressed in the form of ratios, so a preliminary discussion is required to indicate how these are normally represented. When expression ratios are shown numerically, they are most commonly expressed in logarithmic space, typically to the base 2, i.e., ratio = log2(red intensity/green intensity). The resulting ratios have the property of being symmetrical about zero, and a negative sign denotes ratios with a larger denominator (making it much easier to grasp the size of such ratios, since these ratios are no longer compressed between 0 and 1, as occurs in real space). Although the base used is not critical, base 2 logarithms are commonly employed because ratios thus expressed are easily converted to “fold inductions” in real space, owing to the familiarity of powers of two as used in the binary numbering system (i.e., a log2-transformed ratio of 4 = 24 = a 16-fold in difference in real space). Note that logarithms to the base 10 are seldom employed, for the simple reason that most biologically relevant ratios tend to fall in the 1- to 10- or 1- to 100-fold range. However, even when ratios are log transformed, it is still difficult to make sense of columns of numbers, and therefore sensible alternatives are required. 2. TreeView and Cluster One of the the most widely used programs for displaying gene expression data is TreeView, developed by Michael Eisen, and available on the World Wide Web at http://rana.lbl.gov, or at http://microarrays.org. TreeView was the first program to exploit the idea that gene expression ratios can be easily and intuitively expressed colorimetrically (7), a notion that has gained general currency. As shown in Fig. 1, the genes in the input set are ordered as the rows Fig. 1. (see facing page) Output from the Cluster/Treeview suite, courtesy of Arkady Khodursky. Rows correspond to individual genes, which are named in the column on the right, while each colorized column corresponds to separate Escherichia coli–specific arrays. In this example, data from 120 E. coli genes have been extracted from 40 arrays. These arrays correspond to five discrete time courses, each representing a different treatment. As explained in the text, gene expression ratios have been rendered colorimetrically, with green shading indicating decreased expression relative to time zero, and red shading indicating increased expression relative to time zero. Gray shading indicates missing or unreliable data. The dendrogram on the left recapitulates the pairing of genes and nodes assigned during hierarchical clustering. The length of the branches is proportional to the distance between the nodes, as is best illustrated by the very deep branch splitting the two penultimate nodes that intuitively divide this data set.

Primer on the Visualization of Microarray Data

221

222

Fawcett

of the figure, while arrays are arranged in columns. When reading across a row from left to right, one is therefore looking at a colorized depiction of the gene expression vector for a particular gene, representing the behavior of a given gene’s expression over the set of conditions represented by the arrays (columns). In this colorization scheme, more intense hues are used to denote more extreme ratios. This intuitively recapitulates what is seen on a pseudocolored photomicrograph of a scanned glass-substrate array hybridized with two different fluorescent probes (typically Cy3 and Cy5 fluorophores, which produce, respectively, green and red signals). However, while a bright red band in TreeView indeed corresponds to an excess of Cy5 relative to Cy3, and a bright green band denotes the reverse, TreeView uses shades close to black as the log ratio of Cy3 to Cy5 approaches 0, although this would appear yellow on an array. One must also bear in mind that since TreeView uses ratio data, any information regarding the absolute signal intensity in either channel is lost (i.e., Cy5 = 65,535/Cy3 = 65,535 and Cy5 = 32/Cy3 = 32 appear to be equivalent). Care must therfore be taken when filtering the data to ensure that the calculated ratios are meaningful and not mearly a reflection of variability that exists below the threshold of reliable detection (i.e., a reflection of the noise present in very low-level signals). Note that while TreeView is designed for displaying gene expression data, it is not intended for classification and is most usually used in conjunction with its companion program, Cluster, which (among other things) can produce an input file suitable for use with TreeView using hierarchical clustering (7), (Chapter 13). The output of the TreeView program is a display of colorized gene expression ratios along with a dendrogram that reflects the degree of similarity between individual genes as well as the order in which genes were assembled into clusters by means of the algorithm in Cluster. This plot is commonly referred to as a “clustergram” or an “Eisen plot.” It has often been demonstrated that genes with similar expression profiles that cluster together tend to be functionally or biochemically related, and often represent genes that work together in a pathway (3). While this is not a hard-and-fast rule, co-clustering (especially in the context of a large input data set) is suggestive that closely clustered genes may have regulatory commonalities. It should additionally be pointed out that, although the order of the columns representing arrays is often specified by the user (as when a time course or dosage series is presented), it is also possible to use hierarchical clustering to order the arrays. This is often used to classify source tissues (e.g., as normal or cancerous). For instance, clustering of this type has been employed to help demonstrate that diffuse large B-cell lymphoma has molecularly distinct variants with different outcomes, and that these variants can be distinguished using this approach (8).

Primer on the Visualization of Microarray Data

223

The technical details for using Cluster and TreeView are well covered elsewhere and are not discussed here. However, note that Cluster allows the user to select a preferred similarity metric from a range of options, as well as to select variations of the clustering process. In practice, the best course is to experiment with the available options in order to generate a clustergram that appears to present the data in the most coherent fashion; there is no universally “best” method for clustering. As a final caveat, it should be understood that the final dendrogram produced by TreeView represents only one of the many valid dendrograms that could be produced by “flipping” the branches of the dendrogram at any node. 3. Promoter Developed by Joe DeRisi, now at UCSF, Promoter is a package designed to display features associated with genomes and to allow the user to perform powerful searches to retrieve associated sequence data. This package is available at both http://microarrays.org and the DeRisi laboratory Web site at http://derisilab.ucsf.edu. The display feature of Promoter is particularly relevant because it creates genome maps with features annotated in genome order, and with a correct scale representation of both the size and position of the feature on the genome or chromosome of interest. Features are also correctly displayed on either the Crick or Watson strands or can be marked as intergenic. By loading an optional “gene data” file (consisting simply of a tab-delimited text file with feature names and an associated log ratio, with each feature separated with a carriage return), Promoter also has the ability to map onto the features data a colorimetric representation of array data. Ultimately, Promoter produces output in PostScript format suitable for direct importation in Adobe Illustrator or similar vector-drawing software, where the annotation is then often customized to suit the figure being created. An excerpt from a recently published example is shown in Fig. 2, which illustrates the results for a single yeast chromosome for a chromosomal immunoprecipitation array experiment performed using antibodies against the Rap1 transcription factor (see Chapter 8 for a description of chromosomal immunoprecipitation on chip methodology). Although not a focus of this discussion, it should also be noted that Promoter’s ability to extract primary sequence data from genetic regions corresponding to hits in microarray experiments is an important preliminary step when attempting to correlate array results with features of the primary sequence data, such as when performing scans for the presence of possible regulatory motifs. Promoter also has the ability to extract primary sequence-containing motifs specified by the user using the IUPAC degenerate nucleotide code, with a user-selected acceptable number of mismatches from consensus.

Fig. 2. Output from Promoter, with additional annotation created in Adobe Illustrator, courtesy of Jason Lieb. This figure illustrates chromosome 5 of Saccharomyces cerevisiae, with each feature shown in genome order, and sized proportionately. The top and bottom rows indicate, respectively, genes on the Watson and Crick strands, while the middle bar indicates regions marked as intergenic. This figure was generated using data from a chromosomal immunoprecipitation array experiment designed to determine the targets of the Rap1 transcription factor, and these target genes have been colored red. Note that when used in conjunction with standard gene expression data, Promoter permits full red/green colorization of expression ratios.

224 Fawcett

Primer on the Visualization of Microarray Data

225

4. Caryoscope Unlike the other display methods discussed, Caryoscope (available at http://genome-www.stanford.edu/~rees/ ), developed by Christian Rees of the Botstein laboratory at Stanford, is not primarily intended to summarize and display gene expression data but, rather, to display the results of array comparative genomic hybridizations (aCGH). The essential idea of array-based CGH is that, instead of cDNA produced from mRNA, genomic DNA (gDNA) can be directly used in array experiments. Comparative gDNA hybridization can therefore be used for gene copy estimation (9). As with gene expression studies, two genomic DNA samples are hybridized at once to the same array, each having been labeled with a different fluorophore. Typically, these genomic DNA samples are obtained from either a normal and a diseased tissue (i.e., channel one measures a sample from a cancerous tissue, which may have undergone gene duplications or deletions, while channel two measures a sample from a normal tissue) (9,10), or from two closely related species, such as recently evolutionarily diverged strains of yeast or bacteria (11,12). In either case, obtaining a log ratio that significantly deviates from zero is presumptive evidence that either a gene amplification has occurred in one of the tissues, or that the gene copy number has been increased in the other tissue. Caryoscope is designed to display these data in a genome-ordered fashion. Separate versions are available for both yeast and human physical map data. The ability to display aCGH ratio data in the context of a physical map is particularly useful given that deletions or duplications often occur on a larger scale than individual genes; indeed, amplifications or deletions often occur in large contiguous regions, and this is immediately evident on examination of the data with Caryoscope. A very nice feature of Caryoscope is that a separate diagram is produced for each of the chromosomes of the organism of interest. As shown in Fig. 3, Caryoscope displays ratios of greater than zero as red bars to the right of the line representing the chromosome, while green bars representing ratios of less than zero are displayed to the left of the line. In this case, color is used only to indicate the sign of the ratio, while the actual deviation of the log ratio from zero is proportional to the height of the bar representing a particular locus. In the example shown, the lines drawn to the right of the main line indicate the ratio associated with a hypothetical bar of that length. Clearly, most of the bars in Fig. 3 are of a length consistent with fluctuation within the “noise” of the expression ratios, but with notable peaks corresponding to areas of copy number variation. 5. DecCor2 DecCor2 is a new software package for displaying summaries of gene expression in genome order. Unlike Caryoscope, or an earlier genome-order

226

Fawcett

Fig. 3. Output from Caryoscope, courtesy of Barbara Dunn. This figure illustrates the results for yeast chromosomes 3 and 6 of a CGH carried out between a strain of yeast used for brewing ale (red) and a standard laboratory strain (green). In this example, the value indicated by the length of the bars is based on a value determined by a sliding window of size 3 representing the average ratio of nearby features. The length of the bars is proportional to the red/green channel ratio, and the logarithmic scale bars drawn to the right of the line denoting the chromosome can be used to gage the magnitude of this ratio. In this example, most deviations appear to be within the range of experimental noise, with the exception of the obvious strong deviations near the telomeric regions.

Primer on the Visualization of Microarray Data

227

display program developed by Dan Zimmer of Sydney Kustu’s laboratory (University of California at Berkeley) that rearranges the actual image spots from array photomicrographs (13), DecCor2 colorimetrically displays correlation coefficient data calculated from many array experiments. The unique feature of this program is therefore that the colorimetric encoding confers information about the similarity of the gene expression pattern of a gene of interest to that of all other genes represented on an array. DecCor2 additionally provides nongraphic output for each gene in the input data set indicating the group of genes that shares the highest degree of correlation or anticorrelation. DecCor2 is designed to distill very large array data sets into a form that quickly allows the identification of those genes with an expression profile most similar (or most dissimilar) to the expression profile of a gene of interest. Indeed, the reliability of the correlation coefficients will tend to increase with the number of available arrays (presumably corresponding to an increasing number of conditions). Since this information can optionally be presented in a structured fashion (such as genome ordering), spatial or functional relationships among genes of interest can be made immediately apparent. Spatial relationships often hint at possible operon structure, or relationship of the gene of interest’s expression pattern to the general cellular growth rate as seen by correlation to ribosomal proteins or other hallmarks of the general cellular growth rate. Often DecCor2 analysis will reveal that the expression pattern of a gene of interest correlates with a broader gene expression program of known genes involved in a common process, such as motility or chemotaxis, or shift to stationary phase. DecCor2 works by calculating a matrix of similarity metrics representing all of the possible pairwise combinations of genes in the input data set. The similarity metric may be specified by the user, and either the Pearson correlation coefficient or the uncentered variant of the Pearson presented by Michael Eisen may be chosen. Unlike TreeView, the colors do not represent induction ratios but, rather, the similarity metric calculated using the entire available gene expression vector (Fig. 4). Bright red shades now indicate a correlation coefficient approaching or equal to 1, while bright green shades indicate a strong anticorrelation approaching or equal to –1. Unlike the dendrograms produced by hierarchical clustering, the output of DecCor2 is intended to be displayed in genome order. Every gene in the input data set will have its own genome-order representation of similarity metrics (i.e., gene of interest vs all other genes). Therefore, provision is made within DecCor2 both to browse through the maps corresponding to each gene in the input set and to search directly for genes of interest.

228

Fawcett

Fig. 4. Sceen shot from DecCor2. This typical screen shot shows the correlation coefficients for the E. coli cheA gene, relative to all other E. coli genes, as represented in genome order, and displayed colorimetrically as described in the text. Note that in several regions, long contiguous regions of genes appear to be coexpressed with cheA, as indicated by bright red coloration. In this example, data from more than 200 E. coli– specific arrays (courtesy of A. Khodursky), representing dozens of experimental conditions, were used for calculating the correlation coefficients. Refer to Subheading 5.3. for a description of the software controls.

Aside from the visual display, DecCor2 exploits the characteristics of the distribution of gene expression vector similarities in order to output lists of genes representing outliers in the distribution. This allows the easy creation of lists of genes most strongly similar in their expression pattern to a gene of interest. By specifying the number of standard deviations (SDs) away from the mean of the distribution that a gene should be before being included in an output list, the user has direct control over the inclusion parameter. Either the distribution of gene-specific similarities (i.e., a gene-specific cutoff) or the global distribution generated by considering all pairwise similarities (i.e., a global cutoff) may be used.

Primer on the Visualization of Microarray Data

229

5.1. Equipment Requirements DecCor2 was developed and tested on a PC-compatible machine running Microsoft Windows NT 4.0, but also runs correctly under Windows 2000 and Windows XP. There is a known problem with Windows 95/98 when searching for a gene profile by name: it will not allow entry of the gene name. This software requires a large amount of memory and 512 megabytes or more of random access memory is recommended. 5.2. Data Formats for DecCor2 DecCor2 minimally requires a data input file and may optionally use a second file format that allows the user to highlight specific user-specified sets of genes. 5.2.1. Array Data

The first input file that is required is the transcriptional profiling data. This should be a tab-delimited text format file (which may conveniently be created using the “Save As” feature from within Microsoft Excel or another spreadsheet package). Each row of this file represents the gene expression vector for a discrete spot on the arrays. The first column should therefore be a text identifier for the spot (this will in most cases be a gene name). The user must ensure that each row has a unique identifier, or the behavior of the program will be undefined. Additionally, there must be only one such column of identifiers. Future versions should support the inclusion of an optional description column, but this is not supported at this time. Note that the order in which the gene names appear in the first column determines the order in which the genes will be displayed on the screen. If you wish to use the program to display data in genome order, this order must be reflected in the order of the genes in the input file. Note also that it is possible in principle to order genes in any manner you wish, such as ordering genes by functional category. After the identifier column, the number of subsequent columns depends on the number of measurements available for each array feature. Hence, each subsequent column represents the log ratios from a particular array. It is crucial that the ratios be log transformed (the base of the logarithm is unimportant) to ensure that positive and negative ratios are symmetric around zero. DecCor2 will work with incomplete data sets (resulting, e.g., from spots that have not passed some quality control measure), provided that empty spots in the spreadsheet are filled in using the “dummy” value of –999 (again, conveniently

230

Fawcett

done with Excel). There must not be an initial header row describing the experiments. An example file format for array data is as follows (all columns are tabdelimited): GeneA GeneB GeneC

2.13 1.63 –4.71

0.51 –999 2.14

1.07 5.14 –999

0.25 –0.38 3.23

–2.34 1.4 –999

5.2.2. Gene Lists

Once an initial analysis has been performed, DecCor2 also permits the user to load a custom gene list that results in specified genes being highlighted on the gene “maps.” To create a gene list, simply create a text file with the name of each unique identifier that you wish to be highlighted separated by carriage returns. Any identifiers that were not used in the original data file will be ignored, and there should be only one identifier per line. 5.3. Installing and Running DecCor2 After the program is downloaded (http://genome-www.stanford.edu/fawcett/ DecCor2), clicking on the DecCor2 icon in the directory you have specified will launch the installer, which will install and optionally launch the application. Note that no other applications should be running at this time. When DecCor2 is executed, it first prompts for the input data file name. Currently, this must be placed in the same folder as the DecCor2 executable and must be in the format specified in the previous section. As previously noted, genes in the input set can be in any desired order, but if gene names are presorted in genome order, then both the text and graphic output from the program will appear in genome order. The program will then prompt for an output file name, to be created for browsing after the user terminates the graphic output session. DecCor2 then prompts for a “minimum vector size,” corresponding to the minimum number of good data points required in a gene expression vector before DecCor2 attempts to calculate correlation coefficients for that gene. If the input set has only a few arrays, values of as small as 3 may be used, but it is preferable to use a minimum vector size of at least 10. Note that, by definition, the user must enter a number less than or equal to the number of arrays in the input data set. If the number of bad or missing data spots flagged with “–999” for a particular gene exceeds this threshold, DecCor2 concludes that insufficient data are available to generate a reliable correlation. In general, arrays representing as many different experimental conditions as possible should be included in the input set. Finally, DecCor2 will prompt the user to

Primer on the Visualization of Microarray Data

231

select a similarity metric, the options being the standard Pearson correlation coefficient or the uncentered variant presented by Eisen et al. (7). DecCor2 next parses the input file and builds a table of all the pairwise correlation coefficients using the selected similarity metric. On a slower computer, or one with less memory, this may take a significant amount of time. On an 800 MHz Pentium III with 512 megabytes of memory, it takes approx 6 min to process an input file consisting of data from 200 E. coli genome-size arrays (corresponding to approx 4500 rows). Note that the processing time is more sensitive to the number of genes (rows) than it is to the number of arrays (columns) in the data set, since the memory and processor time requirements grow with the square of the number of rows. After building the correlation tables, a new display window appears showing the interactive graphic display (Fig. 4). This window displays a colorized map indicating the correlation coefficient between the gene name listed in the upper left-hand corner relative to all the other genes in the input data set. Presuming that the input set was in genome order, the first input gene will appear in the top left, with subsequent genes proceeding from left to right, before moving down one row at the right-hand border. Strong correlations are bright red, while strong anticorrelations are bright green. If there is no strong correlation or anticorrelation between the index gene and a map gene, the box corresponding to the map gene will have a shade approaching black. The scale bar on the lefthand side of the display indicates the correlation coefficient that corresponds to the brightest shades of red or green. This is, by default, set so that the brightest shades correspond to an absolute correlation of 1. However, this behavior can be modified using the slider on the bottom left, which effectively adjusts the contrast of the map. Adjusting the slider will adjust the numbers shown above and below the scale bar, and map genes with correlations above or below the new cutoff will be mapped to the brightest shade of red or green. Similarly, the lower right scale bar adjusts the “black point.” Manipulating this slider adjusts the correlation coefficient cutoff for mapping to black those genes with minor deviations from a correlation of zero. In this way, genes with correlations or anticorrelations below those that the user considers to be significant will be mapped to black. Note that in addition to the standard red/green palette, DecCor2 supports a “heat map” style of display that may be preferred by some users; this may be accessed by checking the “brush style” box. Rolling the mouse over the squares within the map results in a display in the top right corner indicating the name and numeric value of the correlation coefficient for the gene currently under the pointer. To switch to the correlation map for the gene under the pointer, simply left-click the mouse to redraw the map for the selected gene. Additionally, there are two other methods by which maps for other genes may be displayed. First, the scroll bar on the

232

Fawcett

right-hand side of the screen can be used to select gene maps either by clicking the scroll arrows or by repositioning the scroll box. Second, the map of a gene of interest may be jumped to by typing the gene name into the search query box in the top middle of the display. Often the user will be interested only in the behavior of a particular subset of the input genes. There are three ways that the display may be altered to accomplish this. The first method is to “filter by hits” using the filter check box. When this is checked, only those genes with the strongest gene expression profile correlations or anticorrelations will be displayed. In the map display, all other genes are displayed as gray. Genes will be shaded out if they do not deviate from the mean of the distribution of correlation coefficients by at least the amount specified by the user in the initial prompt. Note that the default distribution analyzed is the distribution of the correlations for the current gene, but, optionally, the global distribution of correlation coefficients for all genes may be used. The second method used to track the behavior of a subset of genes is to position the pointer over a gene of interest, then left double-click the mouse. This inserts a small yellow marker under the position of the gene, which allows the user to keep track of the gene as alternative maps are displayed. The user may select as many genes as desired using this method, and a second double-click on a gene results in clearing the marker for that gene. Alternatively, hitting the button labeled “clear all” simultaneously clears all such markers. There is also provision for automatically marking a predefined set of genes, such as sets of genes that are involved in the same pathway or that have an interesting functional relation. As described under “file formats,” one can create a plain-text format gene list file with each gene name of interest on a separate line. Hitting the “load” button and selecting a gene-list file automatically marks all of the specified genes. Note that genes named within the gene-list file that were not in the data input file will be ignored. Gene spellings, including capitalization, must be identical. 5.4. Concluding a DecCor2 Session Pressing the “OK” button in the lower right-hand corner exits the graphic display portion of DecCor2 and initiates the creation of the output file. This output file will be created in the directory containing the DecCor2 executable and will have the name specified by the user during program initialization. This output file, which should be opened in a text editor such as Wordpad that supports long lines, consists of three portions: 1. A series of 200 bins containing the counts of correlation coefficients falling within each bin. Suitable for constructing a histogram of the global distribution

Primer on the Visualization of Microarray Data

233

of correlation coefficients, this output often assumes a very normal appearance when using a large input data set. 2. A rowwise output of all the input genes, followed by a list on the same row of all the genes that had a correlation coefficient higher than the specified number of SDs above the mean of all the pairwise correlation coefficients. The cutoff correlation coefficient used for this output is the aforementioned global cutoff. 3. Another rowwise list of all genes, followed by a list on the same row of all the genes with a correlation coefficient exceeding a gene-specific cutoff. In this case, the cutoff is the mean plus the specified number of SDs calculated from the distribution of only that gene’s pairwise correlation coefficients. Optionally, this list may be filtered to show only genes that are pairwise reciprocal (i.e., GeneB appears in the list for GeneA, and vice versa). Both of the gene lists generated are intended to help identify genes that are most similar in their pattern of expression to the gene listed in the first column. Note that the most similar gene is always itself, owing to the correlation coefficient of 1 for self-similarity.

References 1. Brown, P. O. and Botstein, D. (1999) Exploring the new world of the genome with DNA microarrays. Nat. Genet. 21(Suppl. 1), 33–37. 2. Spellman, P. T., Sherlock, G., Zhang, M. Q., et al. (1998) Comprehensive identification of cell cycle-regulated genes of the yeast Saccharomyces cerevisiae by microarray hybridization. Mol. Biol. Cell. 9(12), 3273–3297. 3. DeRisi, J. L., Iyer, V. R., and Brown, P. O. (1997) Exploring the metabolic and genetic control of gene expression on a genomic scale. Science 278(5338), 680–686. 4. Tusher, V. G., Tibshirani, R., and Chu, G. (2001) Significance analysis of microarrays applied to the ionizing radiation response. Proc. Natl. Acad. Sci. USA 98(9), 5116–5121. 5. Iyer, V. R., Horak, C. E., Scafe, C. S., Botstein, D., Snyder, M., and Brown, P. O. (2001) Genomic binding sites of the yeast cell-cycle transcription factors SBF and MBF. Nature 409(6819), 533–538. 6. Lieb, J. D., Liu, X., Botstein, D., and Brown, P. O. (2001) Promoter-specific binding of Rap1 revealed by genome-wide maps of protein-DNA association. Nat Genet. 28(4), 327–334. 7. Eisen, M. B., Spellman, P. T., Brown, P. O., and Botstein, D. (1998) Cluster analysis and display of genome-wide expression patterns. Proc. Natl. Acad. Sci. USA 95(25), 14,863–14,868. 8. Alizadeh, A. A., Eisen, M. B., Davis, R. E., et al. (2000) Distinct types of diffuse large B-cell lymphoma identified by gene expression profiling. Nature 403(6769), 503–511. 9. Pollack, J. R., Perou, C. M., Alitadeh, A. A., et al. (1999) Genome-wide analysis of DNA copy-number changes using cDNA microarrays. Nat. Genet. 23(1), 41–46. 10. Hodgson, G., Hager, J. H., Volir, S., et al. (2001) Genome scanning with array CGH delineates regional alterations in mouse islet carcinomas. Nat. Genet. 29, 459–464.

234

Fawcett

11. Salama, N., Guillemin, K., McDaniel, T. K., Sherlock, G., Tompkins, L., and Falkow, S. (2000) A whole-genome microarray reveals genetic diversity among Helicobacter pylori strains. Proc. Natl. Acad. Sci. USA 97(26), 14,668–14,673. 12. Murray, A. E., Lies, D., Li, G., Nealson, K., Zhou, J., and Tiedje, J. M. (2001) DNA/DNA hybridization to microarrays reveals gene-specific differences between closely related microbial genomes. Proc. Natl. Acad. Sci. USA 98(17), 9853–9858. 13. Zimmer, D. P., Soupene, E., Lee, H. L., et al., Nitrogen regulatory protein C-controlled genes of Escherichia coli: scavenging as a defense against nitrogen limitation. Proc. Natl. Acad. Sci. USA 97(26), 14,674–14,679.

Microarray Databases

235

15 Microarray Databases Storage and Retrieval of Microarray Data Gavin Sherlock and Catherine A. Ball 1. Introduction Microarray experiments rely on and generate (1–3) quantities of data that are simply too large to be stored on a researcher’s desktop computer in spreadsheet format. A single microarray may have 40,000 spots. Associated with each spot may be as many as 40 different metrics, and an experimental series may consist of many dozens of such microarrays. Thus, to manage microarray data effectively, a microarray database is required; indeed, a database is not a luxury when carrying out microarray experiments—it is a necessity. In this chapter, we examine some of the properties that a microarray database should have. While this chapter focuses on the needs for tracking and storing data associated with spotted glass microarrays in particular, most of the considerations are pertinent to storage of large-scale expression data obtained on other platforms, such as Affymetrix gene chips, and nylon arrays. It is possible to limit the information stored in a database to the information that is generated by the actual hybridization of samples to the microarray and the subsequent scanning of the microarray. However, the microarray projects usually begin much earlier than hybridizations, and the upstream data are equally important for successful analysis of microarray experiments. Thus, there are really two kinds of microarray data: those data that pertain to everything upstream of actual use of the microarray and those data from the experiment onward. The former type of data (tracking data) may be stored in a separate database, such as a laboratory information management system (LIMS), although they are needed to help one decide which experimental data From: Methods in Molecular Biology: vol. 224: Functional Genomics: Methods and Protocols Edited by: M. J. Brownstein and A. Khodursky © Humana Press Inc., Totowa, NJ

235

236

Sherlock and Ball

are reliable, and for subsequent troubleshooting. The latter type of data, stored in the experimental database, encapsulates everything from the biological samples used and how they were treated, to the actual measurements derived from scanning the hybridized array and the normalized versions of them. 1.1. Tracking Data 1.1.1. Spotted Samples

The key piece of information that has to be recorded when using microarrays concerns the nature of the elements that are spotted on the array. Depending on exactly what is being spotted, and how it was generated, these data may be in the form of DBEST clone IDs and accession numbers, polymerase chain reaction (PCR) primer sequences, or sequences of long oligonucleotides that are spotted on the array. It has been argued that sequences should be mandatory because each clone on an array can be represented in public databases by several different IDs and accession numbers. 1.1.2. Quality Control Information from Preparation of Materials for Spotting

When either cDNA clones are spotted or specific regions of a genome are selected and amplified, they have to go through at least one round of PCR before printing. It is important that quality control information about these PCR products be tracked, because it may subsequently be useful for selection of data from a microarray database. For example, data from spots where the PCR failed, or the fragment was of an unexpected size, can be filtered out. Failed or anomalous products are printed because PCR reactions are usually done in 96-well format, so to simply spot only the products of those reactions that were deemed to have worked is impractical—instead, the content of each well in each plate is spotted. Thus, tracking the quality of those products is necessary. 1.1.3. Physical Location of Products

DNA microarrays on glass slides are usually printed by spotting DNA solutions from individual wells in the microtiter plates. Each spot on a DNA microarray uniquely corresponds to the well in a microtiter plate and not to the identity of a DNA material that has been printed. That is why it is critical to keep track of the physical location—plate coordinates—of each DNA solution. In practice, a database user will benefit from this information at least on two accounts. First, DNA replicates with the same IDs within the same or different PCR plates can be easily identified by their different locations on the printing plates. This facilitates the independent statistical analysis of hybridization data obtained on the identical DNA sequences. Second, if some nonidentical DNA

Microarray Databases

237

sequences demonstrate very similar expression profiles, it is common practice to verify their relative location on the array. If such genes make a “streak” on the array (i.e., printed by the same print tip) located next to each other in a subarray and show identical trend in hybridization outcome (“green” or “red”), one has to rule out the possibility of cross-contamination during the print. A similar need arises when one deals with “identical expression profiles” of the genes that are situated next to each other in a print microtiter plate. Efficient recovery of the information about the print plate location of DNA solutions in question will streamline the analysis as well as help line up the control experiments. 1.2. Experimental Microarray Data 1.2.1. Biological Samples

A microarray database should allow recording of as much information as can be reliably obtained about the biological sample used in an experiment. Such information includes the organism and genotype (if known) from which the sample was derived, and the organ and/or anatomical derivation of the sample, if appropriate. In the case of human samples, a good deal of additional information could (and probably should) be added; for example, postmortem interval, cause of death, clinical diagnosis (if any) based on chart review, gender, age, medications used, toxicology screening results, and so on. 1.2.2. Protocols

During the course of a microarray experiment, many manipulations of the biological sample are likely to be carried out, and protocols for these manipulations should be faithfully recorded as part of the experiment, such that subsequent use of the data, by either the experimenters themselves or a third party, can assess exactly how and in what context the microarray data were generated. The protocols for the extraction of RNA from the biological sample, the amplification procedure, and the hybridization protocol itself should also be recorded, both for the purposes of reproducing the experiment and for troubleshooting and tracking of any protocol-dependent systematic errors that may have occurred. 1.2.3. Microarray Expression Data

Microarray expression data are the actual data generated by scanning a hybridized microarray. There are several available packages for gridding and for extracting the data from microarrays, so the database of choice should be able to support data entry from the chosen image analysis program. It is typical that the data from a microarray are not simply the ratio for each spot; there are

238

Sherlock and Ball

usually multiple values per spot, such as intensity of each channel, background of each channel, and regression correlation. Many of these are useful as quality indicators of the spots. The minimal set of spot statistics that can be used for quality control usually includes the regression coefficient of the pixel-by-pixel intensities in two channels, background intensity, number of pixels at some level above background, spot size, and average and/or median intensity of the spot. However, it should be up to the individual experimenter to determine the necessary set of statistics for effective filtering without significant loss of information, which is critical in some of the downstream applications. While the normalized ratio of background-subtracted signal intensities is often all that is required to indicate the relative expression level in data analysis, one also must have an understanding of what the different spot measurements are, and how they might be used so that an informed decision can be made about which metrics to record and which to discard. Because robust analytical approaches are still in the early stages of development, it is probably wise to store as many data columns as possible, if not all of them. It is reasonable to expect that more sophisticated methods of analyzing results will be developed in the near future, so data judged unimportant today might become useful in the future. This accordingly demands greater storage space. 2. Data Retrieval The ability to query and retrieve data effectively makes a database a powerful and often indispensible research tool. Effective retrieval, storage capacity, ease of submission, along with the flexibility and rationality of design, including the interface, are important criteria that determine the choice of a database for individual researchers. A microarray database must allow a researcher to retrieve data about a single microarray, in a file containing all the results for the array, as well as the associated biological information. Annotation of the elements on the array is essential for interpretation of the results. Retrieval of data from multiple arrays, so that expression of genes in a group of related arrays (e.g., arrays that are part of a time series or a study of related tissue samples) can be assayed, is also a requirement of a microarray database. 2.1. Data Filtering and Extraction A microarray database should support filtering of data during retrieval on a spot-by-spot basis, when identical sequence elements located in different wells in the print plate are treated as separate entities, as well as on a sequence ID basis, when the merged statistic (mean, median) is reported for multiple microarray entries that have the same sequence ID.

Microarray Databases

239

Thus, it should be possible to remove, or filter, data that are generated from spots of dubious quality, where metrics of quality may be decided by the experimenter and will depend on what data are stored within the database. Additionally, quality measurements from the manufacture of the array (whether a PCR product showed an anomaly or whether the sample might be contaminated) ought to be communicated from the LIM system (if one is used) that tracked the array synthesis. Examples of filtering metrics include flag status (indicating whether a spot was identified as being suspect, usually as the result of visual inspection of the image by the researcher, or automatic detection by image analysis software), the strength of signal to background, and the regression correlation. For extracting information on a sequence ID basis, it should also be possible for a researcher to select data for genes that have at least a certain percentage of data present, or that vary by a certain amount in a set of arrays. Alternatively, a researcher might wish to retrieve all data for a set of genes in a group of arrays based on the identity of those genes (or at least the entities on the arrays that represent those genes), using, e.g., a list of genes of interest, or possibly selecting based on the annotation that the genes might have. 2.2. Modeling of Arrayed Samples An easily overlooked point is how to model the entities on the arrays themselves and how they relate to the biological molecules that they represent. A simple model would be to treat the DNA sequences on the chip as if they were the genes themselves. However, this model rapidly becomes inadequate. It is obvious that this approach does not allow effective modeling of nongenic sequences (such as intergenic regions), or of large sequences that may span several genes, such as BACs. It is also ineffective at modeling gene sequences. A microarray database must model the sequences using at least two different levels of specificity: first, at the level of the physical sequence that is the entity on the microarray; and, second, at the level of the locus to which that entity maps in the genome. It is important to keep in mind when designing a microarray database that many sequences on a microarray may map to a single gene. Mapping between that sequence element on the array and a gene may evolve over time, as our knowledge of genomes and the ability to predict genes within them becomes more refined. For instance, many sequences (e.g., cDNA clones) may map to a single genetic entity, such as a Unigene cluster. The ability to retrieve data by either of these models is also useful. Retrieving clones that map to the same Unigene cluster separately is useful to be able to verify the quality of the data from the individual clones. This may allow one to determine whether a particular clone is contaminated or has been erroneously

240

Sherlock and Ball

mapped to a particular Unigene cluster, if its expression pattern is different from those of other clones from the same cluster. Alternatively, retrieval of data for multiple clones that do map to the same gene as a single, collapsed set of data is also important. Having many measurements for the same gene may subsequently affect analyses unless the many copies of the gene are downweighted in the analysis. Collapsing the data is a means to prevent this. An additional level of identification of the entities on a chip is that of instances of a piece of DNA. For example, a cDNA clone may come into the laboratory more than once, and even though each copy of the clone should ostensibly contain exactly the same sequence, it is prudent to have the ability to track these entities separately, as well as be able to collapse them to a single entity. A more sophisticated model might map all the sequences on a microarray not just to the genes that they represent, but also to each of the exons that they may contain. Those exons could then be mapped to transcripts and the database could theoretically allow comparison of expression patterns of alternative transcripts. While this strategy is only effective with detailed knowledge of both the exons and alternative splice forms that exist, its potential value to the biologist is obvious. 2.3. Biological Annotation of Sequences Analysis of microarray data is meaningful only in a biological context. Thus, the database holding the microarray data must also hold information that will place the data in that biological context. This can be achieved by linking the entities on the microarrays to annotation of the genes to which they map. To analyze microarray data effectively, these annotations must be accurate and up to date. The ability to achieve this is complicated by three factors. The first is that our understanding of genes and their products is changing. As more research is carried out, the information associated with many, if not all, elements on an array may be altered. The second is that the nature of annotations varies from organism to organism. For instance, the genes from one organism may be annotated by genomic coordinates and each of the three Gene Ontologies, whereas genes from another less-well-studied organism may have a simple description. Finally, for many genomes the actual mapping between a piece of DNA and the gene it is meant to represent can also change: with each release of the human Unigene clusters, several hundred clones change their cluster allegiances compared with the previous releases. Thus, a microarray database must be designed with these facts in mind and deal with them accordingly, to allow the annotation of entities on chips to be dynamic. This often means that new tables are added to the database to accommodate microarray studies on additional organisms.

Microarray Databases

241

2.4. Toward a Standard: MIAME Accurate annotation of microarray experiments, to facilitate either independent verification or accurate interpretation and analysis of the generated data, is a necessity. Toward this end, members of the microarray research community are working on developing a standard, MIAME (4), which defines the minimal information about microarray experiments that should be recorded. The MIAME specification, available at , is not a strict set of requirements, but really an informal set of guidelines, indicating what type of data should be recorded when microarray data are made publicly available. In the future, it is likely that journals and funding agencies will adopt such standards for data release, so when considering a database, a researcher should check whether MIAME support is either in place or intended to be developed. The MIAME specification describes experimental annotations that fall into six categories, most of which have already been discussed and are already a prerequisite of a good database: 1. Experimental design: the set of hybridization experiments as a whole—MIAME allows the data from a group of related microarrays to be grouped and described as a unit. Both the type of experiment can be described (e.g., a time series, a comparison of diseased tissue with healthy tissue, or comparison of a wild-type to a mutant) and the relationships of one array to another can be detailed, such as an order of the arrays within a series. 2. Array design: each array used and each element (spot, feature) on the array—In addition to information about the sequences spotted on the arrays, this section of MIAME records details about the platform of the microarray and production protocols. Recording this type of information has been discussed in the sections about LIM systems and modeling of sequences. 3. Samples: samples used, extract preparation, and labeling—The description of the samples used for hybridization should include topics such as the primary source of the biological sample; the organism from which it was derived; and the protocols used for its preparation, RNA extraction, and subsequent labeling. 4. Hybridizations: procedures and parameters—This section of MIAME describes the parameters and protocol of the hybridization reaction such as concentration of buffers, temperature, and length of hybridization. 5. Measurements: images, quantitation, specifications—The actual experimental results, progressing from raw to processed data, are covered by this section of MIAME, in the following three subsections: the original scans of the array (images); the extracted microarray data, based on image analysis; and the final data after normalization and consolidation of replicates. 6. Normalization controls: types, values, and specifications—There are many sources of variation in microarray experiments that affect the measured gene expression levels. Normalization is the procedure used to reduce the impact of some variations on the data generated using microarrays. To be able to compare

242

Sherlock and Ball two or more microarray experiments, we need to remove, as best we can, the systematic variation. This section of MIAME allows recording of the scheme used for normalization, which genes may have been used for that scheme, and the algorithm that the scheme employed. In addition, the results of the normalization scheme, such as normalization factors, should be reported in this section.

3. Tools and Analysis Packages A microarray database could simply serve as a data repository, with methods to enter and retrieve the data, as already discussed. However, it is convenient or even necessary to have various analysis and visualization tools connected directly to the database. Such tools might graph various spot parameters (e.g., channel 1 intensity vs channel 2 intensity), which may be useful for assessing overall array quality. In addition, tools for actual data analysis, such as hierarchical clustering (5), self-organizing maps (6–8), and principal components analysis (9) may come as part of a database package. Certainly, there are many commercial and free stand-alone tools for microarray analysis. If these are to be used, it is an obvious requirement that the database be able to produce data in the correct format for these tools to read. 4. Interfacing Between LIM System and Results Database If, in addition to a microarray database, a separate LIM system is being used, then a certain amount of redundant storage between the two databases is necessary. Then the data within the LIM system that is useful for filtering microarray data can be taken advantage of. Obviously only that data required for on-the-fly filtering and analysis of the microarray results should be duplicated, since the more redundancy there is, the harder the problem becomes when data need updating. Typically, this will be the information pertaining to the plates that were used in a microarray print and the samples they contain, and then a unique identifier produced by the LIM system that tracks each instance of a piece of DNA. Interfacing between the two systems can be accomplished by production of a print file by the LIM system (sometimes referred to as a godlist), which is subsequently fed into the results database. Experiments are associated with the correct microarray print as they are entered into the database. 5. Computing Issues Associated with Microarray Databases To use microarray data effectively, the raw data, normalized data, and all the associated spot statistics should be stored. Consequently, storing microarray data is nontrivial. While the ratio may be the salient value associated with a spot, filtering data using spot quality control metrics is an essential feature of the database. Additionally, the database should allow for an effective renormalization procedure as superior normalization techniques become avail-

Microarray Databases

243

able. Thus, if a typical microarray of 20,000 produces a million data points, a microarray database requires significant computing resources. The amount of required storage is dependent on both the number of experiments that will be performed and the size of the individual arrays, and it will be greatly increased if original tiff images derived from scanning the arrays are to be archived. For example, as of August 2002, the Stanford Microarray Database (SMD) (10) had 28,000 experiments, whose results are recorded in approx 600,000,000 rows (averaging 21,500 rows per experiment). Physically, this takes up approx 150 gigabytes (GB), with another 80 GB needed for the indexes on this table. This storage cannot be simply accomplished using large, cheap disks, because performance would rapidly degrade as the amount of data and the number of concurrent users increase. In addition, storage of original tiff images produced by scanning a microarray requires approx 30 megabytes for each experiment (with compression). Thus, although many projects will not be generating thousands of microarrays per year, projects of all sizes must anticipate future demands and plan accordingly for the required storage. The type of machine on which to install a microarray database is dependent on the database used, the total number of users the database will have, and how many of these users will employ the system concurrently. If the database is a multiple-user system, and many users will be retrieving and analyzing data simultaneously, then a multiprocessor machine running a Unix variant such as Solaris or Digital Unix would be strongly recommended, assuming the database management system supports it. 6. Costs Associated with a Microarray Database Maintaining a large microarray database can be expensive. The main factors to consider in the cost are the machine(s) on which to install and house the database, the database back-end software, and the staff to maintain the database. In selecting the type of machine to house the database, the database management system and the scale of the project are the prime considerations. For the database management software itself, there are both free and commercial alternatives. The well-known commercial database management systems, such as Oracle and Sybase, will have more features and access to technical support than a free alternative such as PostgreSQL (www.postgresql.org/) and mySQL (www.mysql.com/). However, the current options for freely available database software are limited, and thus the choice of the microarray database package will probably determine what database platform is required. 7. Freely Available Databases There are several commercial microarray databases available (see ref. 13 for details), but many of these are likely to be far beyond the budget of

244

Sherlock and Ball

most laboratories. Consequently, I describe three freely available (at least to academics) databases, all of which distribute their full source code and schema, allowing customization (or improvement) by enterprising laboratories. 7.1. AMAD (Another Microarray Database) AMAD is a flat-file database that evolved from a database that was used internally at Stanford in the Pat Brown and David Botstein laboratories and was written by Mike Eisen, Paul Spellman, Joe DeRisi, and Max Diehn. AMAD is available from http://microarrays.org/software.html. 7.1.1. Requirements and Installation

AMAD requires a computer that can host a Web server and run Perl, such as a PC running Linux. Installation is fairly simple, and there is a detailed installation document explaining how to do it. 7.1.2. Features

AMAD allows data uploading and subsequent viewing and retrieval of that data. Experimental data can be viewed on an experiment-by-experiment basis, or data can be retrieved for multiple experiments simultaneously, into a single file, for use in subsequent analyses (output files are compatible with Mike Eisen’s Cluster software). Filtering of the data by any column of data that is present in the uploaded files may be done when retrieving data from AMAD, and the user can add additional arbitrary columns of data when defining the contents of a microarray print, and AMAD will transfer that data to the experimental data files. AMAD supports loading of data from both Scanalyze (http://rana.lbl.gov/EisenSoftware.htm) and GenePix (www.axon.com/ GN_GenePixSoftware.html), two commonly used software packages for analyzing scanned microarray images. 7.1.3. Advantages

AMAD is a simple and effective database for a laboratory with a modest budget and with a few dozen to a few hundred arrays’ worth of data. It is easy to install and has an uncluttered, intuitive interface. 7.1.4. Disadvantages

AMAD is not a relational database and thus does not have many of the features that a relational database provides. Consequently, there is a large amount of data redundancy (e.g., every experiment coming from a given print reproduces all of the same print information), which means that when annotation or tracking information needs updating, many files may require modification. The limitations of the flat-file system make this package impractical

Microarray Databases

245

for any group of investigators who expect to carry out a substantial number of microarray experiments. In addition, there is no simple way to update an experiment if an error in the print list is made, other than reentering the experiment with a corrected print list. AMAD is no longer under active development and, consequently, will not be MIAME compliant—a replacement, NOMAD, which uses the free relational database mySQL, is under development. 7.2. Stanford Microarray Database The SMD uses Oracle as its database management system and is thus a relational database. Its full source code and schema are available from http://smd.stanford.edu. 7.2.1. Requirements and Installation

The Stanford installation of SMD is on a Sun E4500 server running Solaris 2.8 with four processors and 8 GB of random access memory. While there is no specific reason to use a Solaris system, Oracle updates and bug fixes often appear first on this platform, making it desirable. SMD installation requires Oracle Enterprise Edition server software, a Web server, Perl, and several Perl modules. This is currently not simple, but an installer script distributed with the software does take care of many of the details of getting it running. Additional details, such as setting up the Oracle instance of the database and creating all the tables and the relationships among them, do require a trained database administrator, although all the SQL scripts required to do this are distributed with the SMD package. 7.2.2. Features

SMD allows entry of either GenePix or Scanalyze data (in either single or batch mode) and subsequent retrieval of data from one or many experiments, with complex filtering, in much the same way as AMAD does. In addition, SMD has many tools built on top of the database that may be used for assessing array quality and experimental reproducibility, visualizing a representation of the original microarray, and performing downstream analyses. The latter are currently limited to hierarchical clustering and self-organizing maps, but future plans are to encompass K-means clustering (11), singular value decomposition (9), and imputation of missing data (12). 7.2.3. Advantages

SMD is a scaleable solution for storing microarray data—the Stanford installation currently has >30,000 experiments, constituting data from approx 600,000,000 spots—while a flexible security model allows fine-grained access control to both data and tools. Several tools are available with the database, and

246

Sherlock and Ball

software for viewing proxy images of the microarray scans to visually evaluate the quality of the data are also available. Furthermore, SMD dynamically updates annotation of the human, mouse, and yeast genes that are represented on the microarrays and is under active development, so that new features and improved schema and software will become available in the future. 7.2.4. Disadvantages

SMD requires expensive hardware and software, as well as trained staff (at least a database administrator and a programmer/curator) to keep it running, and it is not simple to install or maintain. Currently, SMD does not store enough experimental or sample information to comply with the MIAME specifications, but this problem should be corrected by early 2003. SMD was designed to store only two-channel microarray data and thus will not store Affymetrix data or nylon membrane data. 7.3. GeneX GeneX (http://genex.ncgr.org) is a freely available database (released under the GNU lesser public license to academics) that uses the free database system PostgreSQL to store the data. 7.3.1. Requirements and Installation

GeneX can be set up on a Linux machine running an Apache Web server with Perl installed. An installation script is used to configure the components of the system. 7.3.2. Features

A client-side curation tool, written in Java, is provided for formatting data sets for secure upload into the database, and then simple html interfaces for retrieving that data either across data sets or for a single experiment can be used. In addition, the software that ships with GeneX provides an application programming interface that allows experienced programmers to make extensions to the interface. There are a number of analytical routines that can be run against the retrieved data, such as clustering, multidimensional scaling, cluster validation, and principal component analysis, that are provided as separately available add-ons for the database. 7.3.3. Advantages

Like AMAD, GeneX is fairly simple to install and does not require expensive hardware or software to install or maintain. It has a well-considered data model and is also able to store data from different array platforms, such as twocolor microarray data and single-channel Affymetrix data. It has a number of

Microarray Databases

247

available tools with which to analyze data. GeneX is under active development so that one can expect improvements to the software, data modeling, and analysis tools, and it has already had several small bug fix updates since its initial release early in 2001. 7.3.4. Disadvantages

GeneX has not yet been demonstrated to scale to hold data for many thousands of experiments, although that, of course, does not mean that it will not do so. GeneX does not allow viewing of proxy images for characterization of array quality. 8. Conclusion A microarray database is a necessity for microarray research, but setting up and maintaining such a database is no simple proposition, potentially requiring significant computing resources and trained personnel. A number of free databases are available for local installation, but none of these alternatives is mature enough to offer simple installation and meet all users’ needs. Of course, there are many available commercial databases (see ref. 13), but the costs of initial purchase (and often subsequent annual licensing fees) are prohibitive to all but the largest of laboratories. Before embarking on a microarray project, a researcher should carefully consider his or her needs regarding a database—indeed, when applying for funding this should be an important consideration. Without an adequate database, microarray projects are surely doomed to failure, and database needs should be planned just as meticulously as the experimental results that the database will eventually house. References 1. Lockhart, D. J., Dong, H., Byrne, M. C., Follettie, M. T., Gallo, M. V., Chee, M. S., Mittmann, M., Wang, C., Kobayashi, M., Horton, H., and Brown, E. L. (1996) Expression monitoring by hybridization to high-density oligonucleotide arrays. Nat. Biotechnol. 14(13), 1675–1680. 2. DeRisi, J. L., Iyer, V. R., and Brown, P. O. (1997) Exploring the metabolic and genetic control of gene expression on a genomic scale. Science 278(5338), 680–686. 3. Schena, M., Shalon, D., Heller, R., Chai, A., Brown, P. O., and Davis, R. W. (1996) Parallel human genome analysis: microarray-based expression monitoring of 1000 genes. Proc. Natl. Acad. Sci. USA 93(20), 10,614–10,619. 4. Brazma, A., Hingcamp, P., Quackenbush, J., et al. (2001) Minimum information about a microarray experiment (MIAME)—toward standards for microarray data. Nat. Genet. 29(4), 365–371.

248

Sherlock and Ball

5. Eisen, M. B., Spellman, P. T., Brown, P. O., and Botstein, D. (1998) Cluster analysis and display of genome-wide expression patterns. Proc. Natl. Acad. Sci. USA 95(25), 14,863–14,868. 6. Kohonen, T. (1995) Self Organizing Maps, Springer, Berlin. 7. Tamayo, P., Slonim, D., Mesirov, J., Zhu, Q., Kitareewan, S., Dmitrovsky, E., Lander, E. S., and Golub, T. R. (1999) Interpreting patterns of gene expression with self-organizing maps: methods and application to hematopoietic differentiation. Proc. Natl. Acad. Sci. USA 96(6), 2907–2912. 8. Toronen, P., Kolehmainen, M., Wong, G., and Castren, E. (1999) Analysis of gene expression data using self-organizing maps. FEBS Lett. 451(2), 142–146. 9. Alter, O., Brown, P. O., and Botstein, D. (2000) Singular value decomposition for genome-wide expression data processing and modeling. Proc. Natl. Acad. Sci. USA 97(18), 10,101–10,106. 10. Sherlock, G., Hernandez-Boussard, T., Kasarskis, A., et al. (2001) The Stanford microarray database. Nucleic Acids Res. 29(1), 152–155. 11. Everitt, B. (1974) Cluster Analysis, Heinemann, London. 12. Troyanskaya, O., Cantor, M., Sherlock, G., Brown, P., Hastie, T., Tibshirani, R., Botstein, D., and Altman, R. B. (2001) Missing value estimation methods for DNA microarrays. Bioinformatics 17(6), 520–525. 13. Gardiner-Garden, M. and Littlejohn, T. G. (2001) A comparison of microarray databases. Brief Bioinform. 2(2), 143–158.

Index

249

Index A Alternating design, 143, 144 AMAD database, advantages, 244 disadvantages, 244, 245 features, 244 requirements and installation, 244 Arraying, see Fabrication, cDNA microarrays Atlas Plastic Film, advantages, 31, 32 binding capacity and efficiency, 33 calibration, 35 hybridization, incubation conditions, 48–50, 52 reagents, 39 time and efficiency, 33 normalization of signals, 51, 52 printing, arrayer, 40 crosslinking, 40, 41 mix preparation, 40 overview, 39, 40 protective sheet removal, 40, 51 reagents, 35–37 probe synthesis, cDNA probe synthesis, 47, 48, 52 poly(A) RNA enrichment, 46, 47, 52 streptavidin magnetic bead preparation, 46

resolution, 50, 51, 53 RNA isolation, Atlas Pure Total RNA Labeling System, 37, 38 cultured cell RNA isolation, 42–44, 52 DNA contamination testing with polymerase chain reaction, 45, 46 DNase treatment, 44, 45 gel electrophoresis, 45 reagents, 37–39, 41, 43 spectrophotometric quantification, 45 tissue RNA isolation, 41, 42, 52 yields, 44 sensitivity, 33, 35, 50, 51, 53 stripping, 39, 50, 52 B Background, array quality, 123 estimation approaches, 115, 116 nylon membrane levels, 25, 26 subtraction, 116 Box plot, graphic presentation of slide data, 118, 119 B statistic, gene ranking, 127, 128, 156 C Caryoscope, microarray data visualization, 225

249

250 Chromatin immunoprecipitation, protein–DNA interaction mapping, chromatin immunoprecipitation, 103, 108 crosslinking, chromatin complex, 101, 102, 108 reversal reaction, 103 DNA microarray analysis, data analysis, 107–109 DNA purification, 103, 104, 108 fluorescent labeling, 105 polymerase chain reaction, 104, 105 probe purification and hybridization, 105–107 extract preparation, 102, 108 materials, 100, 101, 108 principles of mapping with DNA microarrays, 99, 100 yeast culture, 101 Class discovery, definition, 131 Class prediction, approaches, 131, 132 Clustergram, data presentation, 222 Clustering, algorithms, feature-based algorithms, 186, 187 globular clustering algorithms, 187, 188 hierarchical clustering algorithms, 163, 164, 184–186 partitional algorithms, 164, 184, 185 selection considerations, 165 similarity-based algorithms, 186 similarity versus dissimilarity matrix, 162

Index transitive clustering algorithms, 187, 188 applications, 183, 184 associating clusters of two partitions, 168–170 class prediction, 131, 132 CLUTO software, algorithm overview, 203–205, 207, 208 availability, 203 cluster analysis features, 208, 211 clustering criterion function, 203, 204 graph-partitioning-based clustering, 204, 205 parameters for clustering algorithms, 206, 207 tree-building for large data sets, 208 usage, 205, 206 visualization of clusters, 211, 213 coregulated genes, 199 group average approach, 185 inducer grouping, 199 K-means approach, 202, 203 meaningful groups, 183 principal components analysis, stability-based validation of cluster structure, advantages, 179, 180 centering, 161, 162 notation, 161, 162 overview, 160 principal components definition, 161 standardization, 162 total variance selection limitations, 178

Index yeast gene expression data example, centered variable clustering, 170–172, 174, 175 functional classes of genes, 170 Pearson correlation similarity measure, 178 stability-based choice of principal components numbers, 175, 176 standardized variable clustering, 176–178 principles, 159 quality assessment of clusters, 196–199 self-organizing maps, 202, 203 similarity measurements between objects, multidimensional objects, categorical attributes, 192, 193 continuous attributes, 190–192 overview, 189 sequences, global sequence alignment, 193, 194 heuristic approaches, 194 local sequence alignment, 194 row similarity scores, 194, 195 types of objects, 189 structures, proteins, 195, 196 root mean square deviations, 195 superimposition, 195, 196 types of objects, 189 similarity measures in microarrays, 201, 202 stability, 165–168

251 subspace, 187 tissue type, gene expression grouping, 199 CLUTO, see Clustering Copy number, see Gene copy number, cDNA microarray analysis D Databases, microarrays, AMAD database, advantages, 244 disadvantages, 244, 245 features, 244 requirements and installation, 244 analysis package interface, 242 commercial databases, 243, 244, 247 costs, 243 data, complexity, 235 types, 235, 236 Escherichia coli, see Escherichia coli DNA microarrays experimental data, biological samples, 237 expression data, 237, 238 protocols, 237 GeneX database, advantages, 246, 249 disadvantages, 247 features, 246 requirements and installation, 246 hardware requirements, 243 laboratory information management system interface, 242 retrieval of data, data filtering and extraction, 238, 239

252 MIAME specifications, vii, 241, 242 modeling of biological samples, 239, 240 overview, 238 sequence annotation, 240 Stanford Microarray Database, advantages, 245, 246 disadvantages, 246 features, 245 requirements and installation, 245 storage requirements, 243 tracking data, physical location of products, 236, 237 quality control information, 236 spotted samples, 236 DecCor2 data formats, array data, 229, 230 gene lists, 230 hardware requirements, 229 installation and execution, 230–232 outlier handling, 228 output file, 232, 233 overview, 225, 227 Double loop design, 143, 144 Double reference design, 143, 144 Double-strand DNA microarrays, see Escherichia coli DNA microarrays Dye bias, experimental layout, 144, 145 E Efficiency, experimental layout, 141–144 Escherichia coli DNA microarrays,

Index applications, 61 array preparation, 71 cDNA synthesis and fluorescent labeling, direct labeling, annealing, 69, 76 cleanup, 69, 76 materials, 63 reverse transcriptase reaction, 69, 76 indirect labeling, annealing, 67 cleanup, 67, 68, 76 coupling reaction, 68 materials, 63 reverse transcriptase reaction, 67, 76 RNA hydrolysis, 67 unincorporated dye removal, 68, 69 formaldehyde gel denaturation, 62 hybridization, 63, 64, 71 Internet resources, Colibri, 74 EcoCyc, 75 EcoGene, 74 E. coli Entry Point, 75 GenProtEC, 75 NCBI, 74 RegulonDB, 75 normalization, 72, 77 quality control, 72, 73 RNA isolation, DNase treatment, 62, 66 ethanol precipitation, 66 materials, 61, 62 mRNA,

Index cell culture and harvesting, 65, 76 cell lysis, 65, 76 enrichment, 66, 76 materials, 62 phenol/chloroform extractions, 66 quality assessment, 67 RNase avoidance, 76 total RNA, cell culture and harvesting, 64, 76 cell lysis, 64 chloroform extraction, 65 ethanol precipitation, 65 hot phenol extraction, 64, 65 materials, 61, 62 sample preparation and application, 70, 71 washing, 71, 72, 76 Experimental design, microarray analysis, comparison of similarly-designed experiments, 147 layout, dye bias, 144, 145 efficiency, 141–144 extendibility, 146 overview, 141 robustness, 145 simplicity, 145, 146 useful subdesigns, 146 pooling, 139, 140 randomization, 146 replication, 138, 139, 146 statistical analysis issues, 112–114

253 variables, 137 Extendibility, experimental layout, 146 F Fabrication, cDNA microarrays, glass slides, see Glass slides, cDNA microarrays nylon arrays, see Nylon cDNA expression arrays plastic arrays, see Atlas Plastic Film spots, size, 1 spacing, 1 False discovery rate (FDR), estimation, see Significant analysis of microarrays gene ranking, 150–152 minimum positive value, 155 Familywise error rate (FWER), gene ranking, 150, 151, 156 FDR, see False discovery rate Fluorescent probes, cDNA, dye coupling, 58 purification, 57, 58 RNA removal, 57 synthesis, 57 chromatin-immunoprecipitated DNA labeling, 105 Escherichia coli, see Escherichia coli DNA microarrays graphic presentation of slide data, 117–120 hybridization, 58, 59 materials for preparation, 56 principles of preparation, 55, 56

254 purification, 58 RNA, isolation for cDNA synthesis, 57 quantity requirements, 55, 56 washing, 58, 59 FWER, see Familywise error rate G GeneChip, principles, 200 Gene copy number, cDNA microarray analysis, advantages, 91 applications, 89, 91 data reduction and analysis, 93, 95 genomic DNA, hybridization, 91, 92, 94, 95 isolation, 93, 95 labeling, 91, 93–95 materials, 91–93 microarray preparation, 93 principles of parallel analysis, 89, 90 RNA labeling and hybridization, 93 washing, 94, 96 GeneX database, advantages, 246, 249 disadvantages, 247 features, 246 requirements and installation, 246 Glass slides, cDNA microarrays, advantages, 1 clone selection and preparation, 2, 3 limitations, 31 materials, 2 plasmid purification, 3 poly-L-lysine coating, 4, 5 polymerase chain reaction, 3, 4 postprocessing, 6

Index principles, 199, 200 robotic spotting, 5, 6 H Hierarchical clustering, algorithms, 163, 164, 184–186 K K-means approach, clustering, 202, 203 L Laboratory information management system (LIMS), database interface, 242 LIMS, see Laboratory information management system M M, mean values for gene ranking, 126, 127, 129 MIAME, microarray data specifications, vii, 241, 242 Microarray sample pool (MSP), titration series for normalization, 122 MSP, see Microarray sample pool N Normalization, Atlas Plastic Film signals, 51, 52 Escherichia coli DNA microarrays, 72, 77 global constant, 120, 121 importance, 120 intra- versus interarray, 120 invariant gene utilization, 122, 123 microarray sample pool titration series, 122 nylon cDNA expression arrays, 26, 27

Index principles, 201 print-tip normalization, 121, 122 Nylon cDNA expression arrays, advantages, 9 background level, 25, 26 cDNA, polymerase chain reaction, 14, 15 purification, 14, 15 standardization, 15 exposure time, 26 hybridization, 13, 24, 27 limitations, 31 normalization of signals, 26, 27 printing of membranes, arrayer, 16 controls, 15, 16 crosslinking, 16 equipment, 11, 12 mix preparation, 16 reagents, 11 probe synthesis, cDNA probe synthesis, 22, 23, 27 poly(A) RNA enrichment, 22 streptavidin magnetic bead preparation, 21, 22 RNA isolation, Atlas Pure Total RNA Labeling System, 12 cultured cell RNA isolation, 18–20, 27 DNA contamination testing with polymerase chain reaction, 21 DNase treatment, 20, 21 gel electrophoresis, 21, 27 reagents, 12, 13 spectrophotometric quantification, 21

255 tissue RNA isolation, 16–18, 27 sensitivity, 9–11, 25, 26 stripping, 13, 25, 27, 28 washing, 13, 24, 25 P PCA, see Principal components analysis PCR, see Polymerase chain reaction Photomultiplier tube (PMT), normalization, 121 voltage and sensitivity, 114 Pixel, intensity scale, 123 threshold, 114, 115 Plasmid, purification for glass slide cDNA microarrays, 3 Plastic arrays, see Atlas Plastic Film PMT, see Photomultiplier tube Polymerase chain reaction (PCR), cDNA for nylon cDNA expression arrays, 14, 15 DNA contamination testing of RNA, 21, 45, 46 glass slide cDNA microarray preparation, 3, 4 Polysomal RNA microarray analysis, applications, 79, 80 cell lysis, mammalian cells, 83, 86 yeast, 82, 83, 86 materials, 81, 82, 86 polysomal profile, 79 RNA labeling and hybridization, 85 sucrose gradient, fraction collection, 83, 84, 86 preparation, 82, 86

256 RNA extraction, 84, 85 Pooling, RNA from many individuals, 139, 140 Principal components analysis (PCA), stability-based validation of cluster structure, advantages, 179, 180 centering, 161, 162 notation, 161, 162 overview, 160 principal components definition, 161 standardization, 162 total variance selection limitations, 178 yeast gene expression data example, centered variable clustering, 170–172, 174, 175 functional classes of genes, 170 Pearson correlation similarity measure, 178 stability-based choice of principal components numbers, 175, 176 standardized variable clustering, 176–178 Promoter, microarray data visualization, 223 Protein–DNA interaction mapping, see Chromatin immunoprecipitation, protein–DNA interaction mapping p value, gene ranking, 130, 155, 156 Q q value, gene ranking, 155 R Randomization, experimental design, 146

Index Reference design, 142, 143 Replication, experimental design, 138, 139, 146 subsampling, 138 types, 138 variability in microarray experiments, 139 RNA, isolation, Atlas Pure Total RNA Labeling System, 12, 37, 38 cultured cell RNA isolation, 18–20, 27, 42–44, 52 DNA contamination testing with polymerase chain reaction, 21, 45, 46 DNase treatment, 20, 21, 44, 45 Escherichia coli, see Escherichia coli DNA microarrays fluorescent probe preparation, 57 gel electrophoresis, 21, 27, 45 polysomal RNA, see Polysomal RNA microarray analysis reagents, 12, 13, 37–39, 41, 43 spectrophotometric quantification, 21, 45 tissue RNA isolation, 16–18, 27, 41, 42, 52 yields, 44 probe synthesis, cDNA probe synthesis, 22, 23, 27, 47, 48, 52 Escherichia coli, see Escherichia coli DNA microarrays

Index poly(A) RNA enrichment, 22, 46, 47, 52 streptavidin magnetic bead preparation, 21, 22, 46 Robustness, experimental layout, 145 S SAM, see Significant analysis of microarrays Scatter plot, graphic presentation of slide data, 117, 118 Segmentation, techniques, 115 Self-organizing map (SOM), clustering analysis, 202, 203 Signal-to-noise ratio (SNR), spot quality assessment, 124–126 Significant analysis of microarrays (SAM), false discovery rate estimation, 153–156 software availability, 156 Simplicity, experimental layout, 145, 146 Single loop design, 142, 143 SMD, see Stanford Microarray Database SNR, see Signal-to-noise ratio SOM, see Self-organizing map Spatial plot, graphic presentation of slide data, 118–120 Spot quality, assessment, 124–126 Spotting, see Fabrication, cDNA microarrays Stanford Microarray Database (SMD), advantages, 245, 246 disadvantages, 246

257 features, 245 requirements and installation, 245 Statistical analysis, cDNA microarrays, array quality, 123, 124 Bayesian method for gene ranking, 127, 128, 156 challenges, 149, 150 class prediction and discovery, 131, 132 clustering, see Clustering differentially expressed gene selection, ranking genes, 126–129 significance assignment, 129–131 experimental design issues, 112–114 false discovery rate, 150–152 false positives, 149 familywise error rate, 150, 151, 156 graphic presentation, 117–120 image analysis issues, 114–117 multiple hypothesis testing, 149, 150 normalization, 120–123 overview, 111, 112, 133 pooled standard deviation, 150 power, 149 p value, 130, 155, 156 q value, 155 rank-sum statistic, 150 significant analysis of microarrays, 153–156 software, 133 spot quality, 124–126 t statistic, gene ranking, 126–129, 150, 152 Sucrose gradient, polysomal RNA microarray analysis, fraction collection, 83, 84, 86 preparation, 82, 86

258 RNA extraction, 84, 85 Symmetric reference design, 143, 144 T TreeView, microarray data visualization, 220, 222, 223 t statistic, gene ranking, 126–129, 150, 152 V Visualization, microarray data, box plot, 118, 119 Caryoscope, 225 challenges, 219 CLUTO software visualization of clusters, 211, 213

Index DecCor2 data formats, array data, 229, 230 gene lists, 230 hardware requirements, 229 installation and execution, 230–232 outlier handling, 228 output file, 232, 233 overview, 225, 227 expression ratio representation, 220 Promoter, 223 scatter plot, 117, 118 spatial plot, 118–120 TreeView, 220, 222, 223

METHODS IN MOLECULAR BIOLOGY • 224 TM

W

Series Editor:

Functional Genomics Methods and Protocols Edited by

Michael J. Brownstein

Arkady B. Khodursky

Laboratory of Genetics, NIMH/NHGRI, National Institutes of Health, Rockville, MD

Department of Biochemistry, Molecular Biology and Biophysics, University of Minnesota, St. Paul, MN

As high-throughput methods become more available and routine, experimentalists and theoreticians must be prepared to take advantage of the analytical power these methods offer. In Functional Genomics: Methods and Protocols, leading experimentalists—many pioneers in the field—describe in step-by-step detail robust methods for microarray-based studies and provide expert guidance in optimal data analysis and informatics. Drawing on insights derived from their long experience in biology, neurobiology, cell biology, molecular biology, and statistics, the authors review each of the key methods and analytical techniques used in functional genomics. On the methods side, this includes proven techniques for monitoring subcellular RNA localization en masse, for mapping chromosomes at the resolution of a single gene, and for surveying the steady-state genome-wide distribution of DNA binding proteins in vivo. For those workers dealing with massive data sets, the book discusses the methodological aspects of data analysis and informatics in the design of microarray experiments, the choice test statistic, and the assessment of observational significance, data reduction, and clustering. Additional chapters outline the many available approaches to data visualization and storage so crucial to the successful mining and examination of experimental results. Timely and cutting-edge, Functional Genomics: Methods and Protocols offers novice and advanced investigators in all biological fields a collection of highly practical, readily reproducible methods, data analysis techniques, and experimental design criteria that will ensure safe passage through one of the most demanding and fastest growing fields today.

FEATURES • Readily reproducible methods for microarray-based studies • Expert guidance on experimental design, data analysis, and informatics

• Robust methods that can be used without modification by researchers new to genomics • Manufacture and use of spotted microarrays on glass, plastic, and nylon membranes

CONTENTS Fabrication of cDNA Microarrays. Nylon cDNA Expression Arrays. Plastic Microarrays: A Novel Array Support Combining the Benefits of Macro- and Microarrays. Preparing Fluorescent Probes for Microarray Studies. Escherichia coli Spotted DoubleStrand DNA Microarrays: RNA Extraction, Labeling, Hybridization, Quality Control, and Data Management. Isolation of Polysomal RNA for Microarray Analysis. Parallel Analysis of Gene Copy Number and Expression Using cDNA Microarrays. Genome-wide Mapping of Protein–DNA Interactions by Chromatin Immunoprecipitation and DNA Microarray Hybridization. Statis-

tical Issues in cDNA Microarray Data Analysis. Experimental Design to Make the Most of Microarray Studies. Statistical Methods for Identifying Differentially Expressed Genes in DNA Microarrays. Detecting Stable Clusters Using Principal Component Analysis. Clustering in Life Sciences. A Primer on the Visualization of Microarray Data. Microarray Databases: Storage and Retrieval of Microarray Data. Index.

90000

Methods in Molecular Biology™ • 224 FUNCTIONAL GENOMICS

M

ISBN: 1-58829-291-6 E-ISBN: 1-59259-364-X

humanapress.com

9 781588 292919