Electromagnetic Waves 1: Maxwell's Equations, Wave Propagation [1, 1 ed.] 1789450063, 9781789450064

Electromagnetic Waves 1 examines Maxwell’s equations and wave propagation. It presents the scientific bases necessary fo

129 19 11MB

English Pages 304 [291] Year 2021

Report DMCA / Copyright

DOWNLOAD PDF FILE

Recommend Papers

Electromagnetic Waves 1: Maxwell's Equations, Wave Propagation [1, 1 ed.]
 1789450063, 9781789450064

  • 0 0 0
  • Like this paper and download? You can publish your own PDF file online for free in a few minutes! Sign Up
File loading please wait...
Citation preview

Electromagnetic Waves 1

SCIENCES Waves, Field Directors – Pierre-Noël Favennec, Frédérique de Fornel Electromagnetism, Subject Head – Pierre-Noël Favennec

Electromagnetic Waves 1 Maxwell’s Equations, Wave Propagation

Coordinated by

Pierre-Noël Favennec

First published 2020 in Great Britain and the United States by ISTE Ltd and John Wiley & Sons, Inc.

Apart from any fair dealing for the purposes of research or private study, or criticism or review, as permitted under the Copyright, Designs and Patents Act 1988, this publication may only be reproduced, stored or transmitted, in any form or by any means, with the prior permission in writing of the publishers, or in the case of reprographic reproduction in accordance with the terms and licenses issued by the CLA. Enquiries concerning reproduction outside these terms should be sent to the publishers at the undermentioned address: ISTE Ltd 27-37 St George’s Road London SW19 4EU UK

John Wiley & Sons, Inc. 111 River Street Hoboken, NJ 07030 USA

www.iste.co.uk

www.wiley.com

© ISTE Ltd 2020 The rights of Pierre-Noël Favennec to be identified as the author of this work have been asserted by him in accordance with the Copyright, Designs and Patents Act 1988. Library of Congress Control Number: 2020937434 British Library Cataloguing-in-Publication Data A CIP record for this book is available from the British Library ISBN 978-1-78945-006-4 ERC code: PE2 Fundamental Constituents of Matter PE2_6 Electromagnetism

Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ix

Chapter 1. Maxwell’s Equations . . . . . . . . . . . . . . . . . . . . . . . . Ibrahima SAKHO

1

1.1. Maxwell’s equations in a vacuum. . . . . . . . . . 1.1.1. Electrostatics . . . . . . . . . . . . . . . . . . . 1.1.2. Magnetostatics . . . . . . . . . . . . . . . . . . 1.1.3. Electromagnetic induction . . . . . . . . . . . 1.1.4. Maxwell’s equations . . . . . . . . . . . . . . 1.2. Maxwell equations in material media . . . . . . . 1.2.1. Electric field and potential in macroscopic dielectric media . . . . . . . . . . . . . . . . . . . . . 1.2.2. Homogeneous linear dielectric media . . . . 1.2.3. Magnetic media . . . . . . . . . . . . . . . . . 1.2.4. Maxwell equations in a polarized and magnetic medium . . . . . . . . . . . . . . . . . . . . 1.3. References . . . . . . . . . . . . . . . . . . . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

1 1 17 33 54 85

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

86 95 98

. . . . . . . . . . . . . . . . . . . . . . . . . .

111 117

Chapter 2. The Propagation of Optical and Radio Electromagnetic Waves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hervé SIZUN 2.1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2. Maxwell’s equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

119 119 121

vi

Electromagnetic Waves 1

2.2.1. Maxwell-Gauss equation. . . . . . . . . . . . . . . . . . . . . 2.2.2. Maxwell-Thompson equation . . . . . . . . . . . . . . . . . . 2.2.3. Maxwell-Faraday equation . . . . . . . . . . . . . . . . . . . 2.2.4. Maxwell-Ampère equation . . . . . . . . . . . . . . . . . . . 2.3. Solving Maxwell’s equations . . . . . . . . . . . . . . . . . . . . . 2.4. Characteristics of electromagnetic waves . . . . . . . . . . . . . . 2.4.1. Propagation speed . . . . . . . . . . . . . . . . . . . . . . . . . 2.4.2. Wavelength and/or frequency . . . . . . . . . . . . . . . . . . 2.4.3. The characteristic impedance of the propagation medium . 2.4.4. Poynting vector . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4.5. The refractive index . . . . . . . . . . . . . . . . . . . . . . . 2.4.6. Polarization . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4.7. Transpolarization . . . . . . . . . . . . . . . . . . . . . . . . . 2.4.8. Different propagation paths . . . . . . . . . . . . . . . . . . . 2.4.9. Fresnel zones . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4.10. Fundamental properties of the propagation channel . . . . 2.5. Propagation modeling . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5.1. Tropospheric propagation . . . . . . . . . . . . . . . . . . . . 2.5.2. Propagation in rural, suburban and urban areas . . . . . . . 2.5.3. Propagation within buildings . . . . . . . . . . . . . . . . . . 2.5.4. Broadband propagation . . . . . . . . . . . . . . . . . . . . . 2.5.5. Ultra-wideband propagation. . . . . . . . . . . . . . . . . . . 2.6. The propagation of visible and infrared waves in the Earth’s atmosphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6.1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6.2. The propagation of light in the atmosphere . . . . . . . . . . 2.6.3. The different models . . . . . . . . . . . . . . . . . . . . . . . 2.6.4. Experimental results . . . . . . . . . . . . . . . . . . . . . . . 2.6.5. Fog and mist . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6.6. Sandstorms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6.7. Meteorological optical range . . . . . . . . . . . . . . . . . . 2.6.8. Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7. Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.8. Recommendations ITU-R . . . . . . . . . . . . . . . . . . . . . . . 2.9. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . .

121 122 123 123 124 125 125 126 127 127 128 129 131 132 133 134 146 147 172 184 196 200

. . . . . . . . . . . .

. . . . . . . . . . . .

. . . . . . . . . . . .

. . . . . . . . . . . .

207 207 208 214 222 225 226 227 231 232 233 233

Contents

vii

Appendix 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

239

Appendix 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

243

Appendix 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

261

Appendix 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

269

Appendix 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

273

List of Acronyms and Constants . . . . . . . . . . . . . . . . . . . . . . .

275

List of Authors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

277

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

279

Preface Pierre-Noël FAVENNEC ArmorScience, Lannion, France

Any electric charge set in motion produces electromagnetic radiation which propagates in space. This property is the basis of radioelectric, or photonic radiation production, used in particular in radio, television and communication systems among others. Any system supplied with electricity, or any element provided with electric charge, emits electromagnetic radiation and generates an electric and/or magnetic field in its close, or even distant, vicinity which is known as an “electromagnetic field”. Before Maxwell’s work, we understood physical reality in terms of material points. After it, we represented physical reality with continuous fields. The concept of a field finds its origin, and its name, in the idea of describing a physical phenomenon from an underlying medium, which would explain the physical properties of space (a field of forces for a field of wheat subjected to the wind). Following Maxwell’s research, the fields acquired an autonomous existence and reached the status of physical beings in their own right, no longer describing “the place where” but “the thing that”. This movement was largely supported by the development of the mathematical formalism of the fields, in terms of partial differential equations. This, with regard to electricity and magnetism, is the content of Maxwell’s theory which he published in 1861. Maxwell is one of the greatest scientists, who changed our view of the world. He made a decisive contribution to the unifying and synthetic vision of electricity and For a color version of all figures in this book, see www.iste.co.uk/favennec/electromagnetic1.zip. Electromagnetic Waves 1, coordinated by Pierre-Noël FAVENNEC. © ISTE Ltd 2020

x

Electromagnetic Waves 1

magnetism. He showed that two domains, that of electric charges and their interactions and that of currents and magnetism, were only two facets of the same problem. Synthesized by four equations combining in the same formalism their respective characteristic magnitudes. He stated these interactions in clear mathematical language: Maxwell’s equations. The vision of a universe formed by particles was succeeded by a world governed by fields, acting from a distance.

  The electromagnetic field is the set of vector fields ( E , B ). The properties of the electromagnetic field at a point in space are determined by the properties of the   electric field E and the magnetic field B at a point. In physics, the term “field” refers to the situation where we are in the presence of a physical magnitude distributed in a given region of space. This magnitude has a value determined at each point in this space and at all times. Having an area of space where there is an electromagnetic field, means that at each point in this space, we have two vector   variables E and B. Electromagnetic waves are produced by excited matter. The deexcitation of the excited source produces around it a periodic variation of the electromagnetic field which propagates gradually in the vacuum at the phase speed (or propagation speed) close to 300,000 km per second. Depending on their emission frequency domain, they have different names: radio waves for the lowest frequencies, infrared waves, visible optical waves, then ultraviolet, then for the highest frequencies, X-rays and gamma rays. The electromagnetic wave propagates: a variable electric field generates a variable magnetic field and conversely a variable magnetic field generates a variable electric field. The conjoint propagation of these variations in a region constitutes a continuous wave phenomenon, capable of propagating (across the vacuum at 300,000 kilometers per second), transporting energy without the need for material support. Waves are vibrations that propagate from one place to another in space, in a material medium or in a vacuum. Electromagnetic vibrations (electromagnetic waves) are waves obeying the laws of electromagnetism. Mechanical vibrations (pendulum, acoustics, etc.) obey the laws of mechanics, but often these mechanical vibrations are in fact fundamentally electromagnetic, due to the electromagnetic interactions of atoms and molecules of materials; they are described by “approximate” laws according to movements following the laws of mechanics. Characterizing or measuring an electromagnetic field is carried out via current or voltage measurements. The electromagnetic field located in one place is the set of   vector fields ( E , B ). Sensors or antennas measure, at a given point, the currents or

Preface

xi

  voltages resulting from the field from the different vector magnitudes E and B . Subsequent processing can, if useful, select the different frequencies. In our everyday life, the environmental electromagnetic field does not arise from a single source. There are fields of natural origin (the sun, galaxy, geomagnetism, etc.) and those of human origin (household materials, transport, telecommunications, energy supply, etc.). Each point on the planet is subjected to a fairly intense electromagnetic “bath” depending on its location. The drawing below, envisaged by Michel Urien, shows that we are all “willingly” bathed in these electromagnetic waves. Let us try to understand our electromagnetic environment!

Figure P.1. A wave bath envisaged by Michel Urien1

This referenced work, presented in two inseparable volumes, is essential for any student, engineer or researcher wishing to understand electromagnetism and all the technologies derived from it. Volume 1 is oriented towards the basic phenomena explaining electromagnetism: the famous Maxwell equations – essential to know – then the propagation phenomena of electromagnetic waves. It only concerns non-ionizing radiation, which is radiation from waves whose energies are insufficient to ionize an atom, that is to say incapable of removing an electron from matter. This excludes all radiation with an energy greater than 12.4 eV, that is that generated by X-ray and gamma ray emitters. This work is made up of two chapters.

1 Source: www.armorscience.com.

xii

Electromagnetic Waves 1

In Chapter 1, Ibrahima Sakho presents the Maxwell equations as clearly as possible. These equations are essential to comprehensively approach electromagnetism and all its derived fields such as radioelectricity, photonics, geolocation, measurement, telecommunications, medical imagery, radio astronomy, etc. In Chapter 2, Hervé Sizun describes the propagation phenomena of electromagnetic, radio and photonic waves. Many factors, often complex, must be taken into account to properly understand these propagation problems in free and sometimes confined spaces. In Volume 2, Jean-Pierre Blot, expert in radio antennas of all configurations, directs his analysis towards antennas, essential elements for the detection of electromagnetic waves, their characterization and use. This volume is intended to describe what an effective antenna should be, according to various parameters and conditions of use. It does not address the detection problems specific to photonics. Photonics and these detection problems will be seen in a future publication of the “Waves” series. Important appendices with essential information, presenting in particular mathematical tools, complete these two volumes. References Cartini, R. (1993). Panorama encyclopédique des sciences. Belin, Paris. de Fornel, F., Favennec, P.-N. (eds) (2007). Mesures en électromagnétisme. Revue RS série I2M, 7(1–4). Favennec, P.-N. (2008). Mesures de l’exposition humaine aux champs radio-électriques – Environnement radioélectrique. Techniques de l’Ingénieur, Saint-Denis. Serres, M., Farouki, N. (1997). Dictionnaire des sciences. Flammarion, Paris.

1

Maxwell’s Equations Ibrahima SAKHO Université de Thiès, Senegal

1.1. Maxwell’s equations in a vacuum Our aim is to introduce the fundamental equations of electromagnetism followed by the four Maxwell equations in vacuum. These equations express the local     relationships between the electric E (r , t ) and magnetic B (r , t ) fields and their    sources constituted by the free charge ρ (r , t ) and current J (r , t ) densities. From an educational point of view, the formulation of Maxwell’s equations in vacuum necessarily involves the study of the three fundamental parts of electromagnetism, which are electrostatic, magnetostatic and induction. The study of these three parts will establish Gauss’s theorem, Ampère’s theorem, Faraday’s law and the local law of the magnetic field translating the conservation of magnetic flux. From this study we will deduce Maxwell’s equations for their applications to the study of the propagation of electromagnetic waves in vacuum and antenna radiation. 1.1.1. Electrostatics1 1.1.1.1. Coulomb’s law: electrostatic field A charged particle, assumed to be a point particle, carries an electric charge denoted q. Two point charges q1 and q2, spaced r apart and placed in a vacuum, are For a color version of all figures in this book, see www.iste.co.uk/favennec/electromagnetic1.zip. 1 (Annequin and Boutigny 1974; Bok and Hulin-Jung 1979; Bruneaux et al. 2002; Amzallag et al. 2006; Benson 2015; Sakho 2018). Electromagnetic Waves 1, coordinated by Pierre-Noël FAVENNEC. © ISTE Ltd 2020 Electromagnetic Waves 1: Maxwell’s Equations, Wave Propagation, First Edition. Pierre-Noël Favennec. © ISTE Ltd 2020. Published by ISTE Ltd and John Wiley & Sons, Inc.

2

Electromagnetic Waves 1

in electrostatic interaction. According to the principle of interactions, the  electrostatic force f 1→2 exerted by charge q1 on charge q2 is equal and opposite to  the electrostatic force f 2→1 exerted by charge q2 on charge q1. According to Coulomb’s law:   kq q  f 1→2 = − f 2→1 = 1 2 e r r2

[1.1]

In equation [1.1], k is the electric constant k =

1 4πε 0

= 9 × 109 SI and ε0 denotes

the dielectric permittivity of the vacuum: ε0 ≈ 8.84 ×10 –12 F⋅ m –1.

q2 →

er q1

q2



f1→2 →

f1→2

r r



→ f2 → 1

er



q1

f2 → 1

( )

q1 and q2 have the same sign a)

( )

q1 and q2 have opposite signs b)

Figure 1.1. Coulomb forces between two point and fixed charges q1 and q2

  The electrostatic forces f 1→2 and f 2→1 are repulsive if the charges q1 and q2 have the same sign and attractive if the two charges have opposite signs (Figure 1.1). Now consider a test charge denoted q0 fixed at a point O in domain D free of charges and currents. Let us place at a distance r from charge q0 a charge q1 fixed at  point M (OM = r). The charge q1 is subject to the electrostatic force f 0→1 from q0. Let us remove the charge q1 and place another fixed charge q2 at the distance r from  charge q0. It is also subject to the electrostatic force f 0→2 from q0. Let’s repeat the

Maxwell’s Equations

3

experiment several times, taking care to leave in domain D only charge q0 and a single charge qi (i =1, 2, 3, …). Each of the point charges qi is subject to an  electrostatic force f 0→i in domain D such that:   kq q   kq q   kq q  kq q  f 0→1 = 0 1 e r ; f 0→2 = 0 2 e r ; f 0→3 = 0 3 e r … f 0→i = 0 i e r r2 r2 r2 r2

[1.2]

 Let’s express the ratios f 0→i / qi . Using [1.2], we obtain:

 f 0→1

q1

=

 f 0→ 2

q2

=

 f 0→3

q3

= .....

 f 0→i

qi

=

kq0  er r2

[1.3]

 The result [1.3] shows that the ratios f 0→i / qi are equal and depend only on the

charge q0 and the distance r between charge q0 and charge qi. In domain D there is therefore a vector field created by the charge q0 known as the electrostatic field,  denoted E M .   By definition, the electrostatic field E M is equal to the ratios f 0→i / qi , so

according to [1.3] (with q0 = q):  kq  E M = 0 er r2

[1.4] →

EM

M →

er O



M

EM → er

r O

q>0 divergent field a)

r

q 0 and convergent if q < 0. On Figure 1.2, a single field line (in green) has been shown to coincide with the direction of the electrostatic field. The expression [1.4] shows  that there is an electric monopole, the source of the electrostatic field E M . In addition, according to [1.4], the electrostatic field created by the point charge q at  point M in space is a radial field in 1/r2. The electrostatic field E M is divergent if q > 0 (Figure 1.2a) and convergent if q < 0 (Figure 1.2b). Furthermore, according to   [1.3] and [1.4], f 0→i / qi = E M . Thus, a point charge q in an area of space where  an electrostatic field E prevails is subjected to the Coulomb force:   f = qE

[1.5]

1.1.1.2. Electrostatic field circulation: electrostatic potential Let us determine the circulation C of the electrostatic field according to direction OM between point M at a distance of r from point O and point M’ at a distance of distance r’ from the same point O (r’ > r). By definition:   C = E ⋅ dr



[1.6]

Using [1.4], we obtain the following, according to [1.6]: C = kq



∞  kq kq  1 = − kq   =  −  2 r∞   r r  r r

dr

By definition, the circulation C of the electrostatic field between points M and M’ is equal to the potential difference between these two points, i.e:  kq kq  C = VM − VM ' =  −  r∞  r

[1.7]

By definition, the electrostatic potential created by a point charge q fixed at point M in space characterizes the electrical state of this point. It is given by the expression: VM =

kq +K r

[1.8]

Maxwell’s Equations

5

In equation [1.8], K is a constant defining the origin of the electrostatic potential (generally, we choose K = 0 to infinity). Is there an equation between an electrostatic field and electrostatic potential? To answer this question, let us express the gradient of the electrostatic potential VM. In spherical coordinates, the radial component of the gradient of a scalar function f is written:  ∂f  1 ∂f  1 ∂f  ∇f = er + eθ + eϕ ∂r r ∂θ r sin θ ∂ϕ

[1.9]

Using [1.8] and [1.9], we obtain the following, considering [1.4]:    dV  d  d  kq  er = kq   er = − er = − E ∇V ⋅ er = 2 dr dr  r  r

The result above allows us to write the important local equation linking the electrostatic field and the electrostatic potential:

  E = − ∇V

[1.10]

Knowing the expression of the electrostatic field, we deduce the potential V from the local law [1.10] and vice versa. Charles-Augustin Coulomb was a French officer, engineer and physicist. He is best known for his many experiments in electrostatics using a torsional balance to determine the force exerted between two electrical charges. He became famous following the publication of Coulomb’s law in 1785, which forms the basis of electrostatics. Box 1.1. Coulomb (1736–1806)

Using equation [1.6], we express the circulation of the electrostatic field on a closed contour (C) (Figure 1.3). We obtain:



C = E ⋅ dl =

M

M E ⋅ dl = V (M ) −V (M ) = 0

[1.11]

6

Electromagnetic Waves 1



(C)

E

M



E

Figure 1.3. Circulation of the electrostatic field about a closed contour (C)

The circulation of the electrostatic field about a closed contour is therefore zero. Let (S) be a surface based on contour (C). Using Stokes’ theorem, we obtain the following, according to [1.11]:

 E ⋅ dl = S (∇ ∧ E ) ⋅ dS = 0 With this equation being verified regardless of the contour or surface (S), we establish one of the local laws satisfied by the electrostatic field:    ∇∧E =0

[1.12]

George Gabriel Stokes was a British physicist and mathematician. He is especially famous for having established Stokes’ theorem in 1854, which is one of the fundamental theorems of integral transformation linking the rotational of a vector field to the circulation of the same field along a closed contour. Stokes’ theorem is widely used in electrostatics and magnetostatics. Box 1.2. Stokes (1819–1803)

1.1.1.3. Electrostatic field and potential of a continuous charge distribution For a continuous charge distribution, we define an infinitesimal charge dq associated with a linear λ, surface σ or volume ρ charge: – linear distribution over a wire with a length dl: dq = λdl; λ in C ⋅ m−1; – surface distribution over a surface dS: dq = σ dS; σ in C ⋅ m−2; – volume distribution in a volume dV: dq = ρ dV; ρ in C ⋅ m− 3.

Maxwell’s Equations

7

Let us consider various continuous charge distributions (Figure 1.4). M

er

dl

λ

P

M

er

r a)

σ

dS

r

M er

P

ρ a)

r

dV

b)

P

b)

c)

c)

Figure 1.4. Continuous charge distributions

 For these charge distributions, the electrostatic field E and the electrostatic

potential V are given by the following expressions: – linear distribution l (Figure 1.4a):  E=

AB 4πε 0 r 2 er

λ dl 

V=

AB 4πε 0 r

λ dl

[1.13a]

[1.13b]

– surface distribution S (Figure 1.4b):  E=

V=

σ dS 

S 4πε 0 r 2 er σ dS

S 4πε 0 r

[1.14a]

[1.14b]

– volume distribution V (Figure 1.4c):  E=

ρ dV 

V 4πε 0 r 2 er

V=

V 4πε 0 r

ρ dV

[1.15a]

[1.15b]

8

Electromagnetic Waves 1

1.1.1.4. Flux and divergence of the electrostatic field: Gauss’s law Let us consider the lines of an electrostatic field about a closed contour (C) (Figure 1.5). By definition, the flux Φ of the electrostatic field across a surface dS is given by the following expression:

Φ=



S

  E ⋅ dS =



S

  E ⋅ n dS

[1.16]

 In expression [1.16], n is the unit vector normal to surface dS. →

(C)

E

(C’)



(S’)

dS (S)

n



dS

Figure 1.5. Electrostatic field lines →

er

O

r

dS

qint

Figure 1.6. Charge qint at the center O of a sphere with radius r

A spherical domain in space has a volume of V. We place, at the center O of the sphere with radius r, an internal charge qint (Figure 1.6). This charge creates, at point M located on the surface and the electrostatic field deduced from [1.6]:  kqint  E= er r2

[1.17]

Maxwell’s Equations

9

The elementary flux dΦ of the field [1.17] across the element surface dS is equal to:     dS ⋅ er d Φ = E ⋅ dS = kqint r2

[1.18]

By definition, the elementary solid angle dΩ is given by equation:

dΩ =

  dS ⋅ e r

[1.19]

r2

Using expression [1.19], the flux [1.18] is written as: d Φ = k qint d Ω

Knowing that k = 1/4πε0, the total flux across the surface S is:

Φ=

qint Ω 4πε 0

[1.20]

In the whole space, the solid angle Ω = 4π. The flux of the electrostatic field created by the charge qint across a closed surface (S) is therefore given by:

Φ=



(S )

  qint E ⋅ dS =

[1.21]

ε0

The result [1.21] is generalized to a distribution of N point charges. Therefore, the flux of the electrostatic field created by a charge distribution across a closed N

surface (S) is equal to the quotient of the algebraic sum Qint =

 q of the charges i

i =1

contained in volume V by the dielectric permittivity of the vacuum ε0, i.e.:

Φ=



(S )

  E ⋅ dS =

qi

ε i

0

=

Qint

ε0

Expression [1.22] transcribes Gauss’s theorem.

[1.22]

10

Electromagnetic Waves 1

Johann Carl Friedrich Gauss was a German astronomer, physicist and mathematician. He formulated the mathematical theory of the magnetometer in his work General Theory of Terrestrial Magnetism (originally titled Allgemeine Theorie des Erdmagnetismus in German) published in 1839. Gauss’s law for electrostatic fields expresses that a positive electrical charge (monopole) creates a divergent field. In physics, Gauss is especially famous for his theorem (Gauss’s theorem) formulated in 1840, allowing the simple calculation of the electrostatic field module created by a charge distribution when the system has symmetry (cylindrical or spherical). Box 1.3. Gauss (1777–1855)

Now let us consider a continuous charge distribution in a domain with volume V. The elementary charge dq = ρdV, ρ denoting the charge density. The total charge is equal to Qint =



V

ρ dV . The elementary flux of the electrostatic field created by

the continuous charge distribution across a closed surface (S) of volume V is written, according to [1.22]:

  dq ρ dV d Φ = E ⋅ dS = =

ε0

ε0

The total flux total across a surface S is therefore equal to:

Φ=



(S )

  E ⋅ dS =



(V )

ρ dV ε0

[1.23]

According to the divergence theorem or Ostrogradsky’s theorem (also known as the Green-Ostrogradsky theorem in French):



(S )

  E ⋅ dS =



(V )

  (∇⋅ E ) dV

[1.24]

Using [1.23] and [1.24], we obtain:    ρ ∇⋅E − (V ) ε0 



  dV = 0 

The equality above is true regardless of the volume V, hence:   ρ ∇⋅E =

ε0

[1.25]

Maxwell’s Equations

11

Equation [1.25] transcribes the local form of Gauss’s theorem and is one of Maxwell’s fundamental equations in a vacuum. George Green was a British physicist. He is especially famous for An Essay on the Application of Mathematical Analysis to the Theories of Electricity and Magnetism, published in 1828. In this essay, he introduces several concepts, such as electric potential. Mikhail Vasilyevich Ostrogradsky was a Russian mathematician and physicist of Ukrainian origin. Ostrogradsky is especially famous for having established, independently of Green, the divergence theorem, also known as Ostrogradsky’s theorem. This theorem, demonstrated by Green in 1826, is one of the fundamental theorems of integral transformation linking the divergence of a vector field to the flow of the same field through any closed surface. Box 1.4. Green (1793–1841) and Ostrogradsky (1801–1861)

1.1.1.5. Poisson and Laplace equations Using the local law [1.10] linking the electrostatic potential and field, the local form [1.25] of Gauss’s law gives:     ρ ∇ ⋅ E = −∇ ⋅ (∇V ) =

ε0

[1.26]

Let’s take into account the following property satisfied by a scalar function f:   ∇ ⋅ (∇ f ) = ∇ 2 f = Δ f

Using this property, equation [1.26] gives:

ΔV +

ρ =0 ε0

[1.27]

The result [1.27] expresses Poisson’s equation. In particular, in a vacuum, the volume charge density ρ = 0. Poisson’s equation leads to Laplace’s equation:

ΔV = 0.

12

Electromagnetic Waves 1

Pierre Simon Laplace was a physicist, mathematician astronomer, and French politician. He is famous in physics for the Laplace equation, which expresses that the Laplacian of the electrostatic potential is zero in a vacuum. In addition, between 1982 and 1784, the magnetic force on a current-carrying wire was named Laplace force. Siméon Denis Poisson was a French mathematician, physicist and surveyor. His contributions in physics relate to electricity and magnetism. Drawing on Laplace’s equation, in 1813, Poisson published the differential equation satisfied by all electrostatic potential. Based on the flux of a vector field, the local Poisson equation was formulated on a macroscopic scale by Gauss in 1840 (Gauss’s theorem). Box 1.5. Laplace (1749–1827) and Poisson (1781–1840)

1.1.1.6. Field and potential of an electrostatic dipole An electrostatic dipole is composed of two opposite point charges – q and + q in  two points A and B in space (Figure 1.7a). By definition, the dipolar moment p is:    p = q AB = qa u

[1.28]

The electric dipole moment is orientated from the negative charge towards the positive charge since q > 0. The units for electric dipole moment are coulombsmeters (C ⋅ m). However, a commonly used unit in for the electric dipole moment is the Debye (Dy) with: 1 Dy = (1/3) × 10 − 29C ⋅ m Furthermore, the appearance of field lines and equipotential surfaces (sets of points brought to the same potential) of an electrostatic dipole are indicated in Figure 1.7b.

 We express the scalar potential V(r,θ) and the field E (r , θ ) created by the electrostatic dipole AB (Figure 1.7a) at point M, (r >> a) far from point O. First, we  determine the potential and, from this, the field E (r ,θ ) using the local law [1.10].

Maxwell’s Equations → er



eθ M

y r1

r2

r →

θ u

A –q

13

B



p

x

+q

O

a a) →

E



p

b) Figure 1.7. a) Electrostatic dipole; b) field lines (in green) and equipotential surfaces (in blue) of an electrostatic dipole

According to the superposition principle, the potential created by the charges – q and + q in M (Figure 1.7a) is given by the expression: V (r1 , r2 ) = −k

1 1 q q + k = kq  −  r1 r2  r2 r1 

[1.29]

14

Electromagnetic Waves 1

Considering Figure 1.7a, we express the radii r1 and r2 as a function of the variables r and θ. We then obtain the following expressions: 1/ 2

  a   a2 a r1 = r + u  r1 = r 1 + + cos θ   4r 2 r  2  

1/ 2

  a   a2 a r 2 = r − u  r2 = r  1 + − cos θ  2   r 2  4r 

Using [1.29], we get: −1/ 2 −1/ 2      kq  a2 a a2 a  − cos θ  − 1 + + cos θ  V (r ,θ ) = 1 +    4r 2 r  r  4r 2 r     

[1.30]

 Since we wish to determine the potential V(r,θ) and the field E (r ,θ ) at point M, (r >> a) far from O, an approximation is needed. The term between parentheses in [1.27] are therefore written approximatively: 1  −  2  a2 a a   1 + 2 + r cos θ  ≈ r 1 − 2r cos θ     4r   1 −  2 2 1 + a − a cos θ  ≈ r 1 + a cos θ   2r  2    r     4r

Using these approximations, [1.30] becomes:  a a    V (r ,θ ) = kq 1 + cos θ  − 1 − cos θ   2 r 2 r     

So, after simplification: V (r ,θ ) =

kqa cos θ r2

[1.31]

Maxwell’s Equations

15

Using expression [1.28], the potential [1.31] is expressed as a function of the electric dipole moment. So: V (r ,θ ) =

kp cos θ

[1.32]

r2

Now we express the components of the electrostatic field using equation   E = −∇ V in spherical coordinates. According to [1.9], we find: 2kp cos θ  ∂V   Er =  Er = − ∂r r3    E = − 1 ∂V  E = kp sin θ θ  θ r ∂θ  r3

[1.33]

Using [1.33], we express the electrostatic field modulus: E = Er2 + Eθ2 =

kp r

3

( 4 cos 2θ + sin 2θ )

So: E=

kp r

3

3cos 2θ + 1

[1.34]

In addition, it would be interesting to express the potential [1.32] and the field [1.34] in Cartesian coordinates. According to Figure 1.7a: r 2 = x2 + y 2 ;

x y = cos θ ; sin θ = r r

[1.35]

Using [1.35], the potential [1.32] is written in Cartesian coordinates as: V ( x, y ) = kp

x 2

( x + y 2 )3 / 2

[1.36]

16

Electromagnetic Waves 1

  In Cartesian coordinates, equation E = −∇ V gives:

Ex = −

∂V ∂V ; Ey = − ∂x ∂y

[1.37]

Using [1.37] and expression [1.36], we express the electrostatic field in Cartesian coordinates. We then obtain:  3x2 1   −  E x = kp  2 2 5/ 2 2 2 3/ 2   ( x + y )   ( x + y )  3xy   E y = kp 2 ( x + y 2 )5 / 2 

[1.38]

Using [1.35], the components [1.38] of the electrostatic field are written as:  1 p(3cos 2 θ − 1)  Ex = 4πε 0  r3   E = 1 3 p sin θ cos θ  y 4πε r3 0 

[1.39]

1.1.1.7. Fundamental laws of electrostatics

The fundamental laws of electrostatics are made up of all the laws verified by the electrostatic field. These laws are summarized in Table 1.1. Circulation of the electrostatic field

Rotational of the electrostatic field

Electrostatic field and potential equation

 E ⋅ dl = 0

   ∇∧E = 0

  E = − ∇V

Integral form of Gauss’s theorem

Local form of Gauss’s theorem

Poisson’s law

 

 

S E ⋅ dS =

Qint

ε0

  ρ ∇⋅E =

ε0

ΔV +

ρ =0 ε0

Table 1.1. Fundamental laws of electrostatics

In practice, the most appropriate formulation is applied to the problem studied.

Maxwell’s Equations

17

1.1.2. Magnetostatics2 1.1.2.1. Lorentz’s magnetic force, Laplace force  Let’s consider a point charge q in motion with velocity v in an area of space   where a magnetic field B prevails. This charge is subjected to the Lorentz force f

given by:    f = qv ∧ B

[1.40]

Lorentz’s law [1.40] is defined at the microscopic scale. This allows us to define  the magnetic field B at the considered point. Let us now consider a set of point charges in overall motion in a portion of a  conductor with length l, placed in a magnetic field B . We are looking, macroscopically, for the expression of the magnetic force acting on the conductor  element l. The overall motion of the charges with velocity v corresponds to the circulation of a current of intensity I. During the time period t, the amount of  electricity circulating in the portion of conductor of length l is Q = It. So fi is the  Lorentz force acting on a charge qi. Using [1.40], the result F of the magnetic forces acting on element l of the conductor is given by the superposition principle:  F=















 f =  q (v ∧ B) = Qv ∧ B = I (tv) ∧ B i

i

i

i

Knowing that each charge qi travels a distance l = vt, the equation above gives:    F = Il ∧ B

[1.41]

Expression [1.41], translating the magnetic force acting on a conductor l  crossed by a current of intensity I and placed in a magnetic field B , corresponds to Laplace’s law. We obtain this law from the current density vector, in section 1.1.2.2.

2 (Bok and Hulin-Jung 1979; Bruneaux et al. 2002; Amazallage et al. 2006; Benson 2015; Sakho 2018).

18

Electromagnetic Waves 1

Hendrik Antoon Lorentz was a Dutch physicist. He was renowned for the famous Lorentz spatial transformation laws (transformations of the space-time four-vector, electric and magnetic fields; during a change of reference frame) which are the basis of special relativity. In addition, we owe to him our knowledge of an electromagnetic force acting on a charged particle in motion in an electromagnetic field. Induction due to the movement of a conductor in a time independent magnetic field is called Lorentz induction in his honor. Box 1.6. Lorentz (1853–1928)

1.1.2.2. Current density vector, continuity equations

Let us consider any medium (material or vacuum) with volume V along with a volume charge distribution. To establish the continuity equation that translates the  charge conservation principle, we add the position r of point M in volume V  (Figure 1.8) and time t when writing the volume charge density equation ρ = ρ (r , t ) . The charge dq contained in the elementary volume dV about point M at time t  is dq = ρ (r , t )dV. The total charge contained in volume V is: q=

V

dq =

V



ρ (r , t )dV

[1.42]

 If q depends only on time, the density ρ depends on both the position r and time. The differential with respect to time of equation [1.42] gives: dq = dt

 ∂ρ (r , t ) dV (V ) ∂t



[1.43]

 When the charges are mobile, v is the velocity of all charges found around M.   By definition, the current density vector often written J (r , t ) is given by:     J ( r , t ) = ρ ( r , t )v

[1.44]

Maxwell’s Equations

19

In addition, the motion of the charge carriers causes the circulation of a current of intensity I. By definition, the intensity I is equal to the flux of the current density vector across a surface dS with volume V (Figure 1.8), i.e.: I=

dq = dt

 



 



(S ) J (r, t ) ⋅ dS = (S ) J (r, t ) ⋅ n dS

[1.45] →

dS



n (S)



j

M dS

Figure 1.8. Current density vector at point M

O r

r’ dS

dV



M’

n



j

dS’

M

Figure 1.9. Current density vector at point M’

The circulation of the current with an intensity I is due to the variation dq of the electric charge contained in volume V during dt. The variation dq is due to the charge dq’ leaving the volume V via the elementary surface dS (Figure 1.9) between times t and t + dt. The law of conservation of charge at time dt needs the following equation to be verified:

dq + dq’ = 0

[1.46]

With the charge dq having been given in [1.46], we now need to express dq’.

20

Electromagnetic Waves 1

To express dq’, we refer to Figure 1.9. The current density vector at point M’ is    J = J (r ', t ) . The charge dq’ leaving the volume V by the base surface dS of cylinder (Figure 1.9) between times t and t + dt is given by an equation that is analogous to [1.46]: dq ' = dt

 



 



(S ) J (r ', t ) ⋅ dS = (S ) J (r ', t ) ⋅ n dS

[1.47]

Using equations [1.45] and [1.47], the law of conservation of charge [1.46] is written as:

(S )

   J (r , t ) ⋅ dS +

(S )

   J (r ', t ) ⋅ dS = 0

[1.48]

To account for the total charge q’ leaving volume V (Figure 1.9), let us turn into account the divergence theorem (Ostrogradsky’s theorem):

(S )

   J (r ', t ) ⋅ dS =

   ∇ ⋅ J (r , t )dV

(V )

[1.49]

So, taking into account [1.43] and [1.45], we see that:

(S )

   J (r , t ) ⋅ dS =

 ∂ρ (r , t ) dV (V ) ∂t



[1.50]

Using [1.49] and [1.50], the law of conservation [1.48] is written in the form:

(V )

   ∇ ⋅ J (r , t )dV +

 ∂ρ (r , t ) dV = 0 (V ) ∂t



i.e.:      ∂ρ (r , t )  ∇ ⋅ J ( r , t ) +  dV = 0 (V )  ∂t 



With this equation being valid whatever the volume V considered, we find the continuity equation reflecting the conservation of electric charge:     ∂ρ (r , t ) ∇ ⋅ J (r , t ) + =0 ∂t

[1.51]

Maxwell’s Equations

21

NOTE.– As we pointed out in section 1.1.2.1, Laplace’s law [1.41] can be established  from the current density vector. For this, let us consider a portion dl of a conductive wire with straight section S traversed by a current with intensity I. This is  placed into a magnetic field B (Figure 1.10). Here n is the density of electrons per unit volume. The charge of an electron qi = − e, therefore the volume charge density ρ = − ne. The current density vector [1.44] and the intensity I of the current [1.45] are written as:    J = ρ v = −ne v ; I =

(S )

  J ⋅ dS = −ne

I →

v

S



S

(S )

v



dl

    v ⋅ n dS = − nev ⋅ n

(S ) dS



n

→ →

B

df

Figure 1.10. Portion of a conductor with section s, traversed by a current with intensity I

  Knowing that n and v are anticolinear (Figure 1.10), the intensity of the current

is equal to:

I = nevS

[1.52]

 The Lorentz force dfi acting on an electron qi = − e is:      dfi = qi v ∧ B = − ev ∧ B

[1.53]

The total number of electrons dN in volume dV = Sdl is dN = nSdl. The Lorentz force acting on dN electrons is therefore equal to:  df =



 

 

 

 dfi =  qi v ∧ B = − edN v ∧ B = −neSdlv ∧ B i

i

   If u is the unit vector according to the direction of the velocity vector v ( u is     not represented to not overburden Figure 1.9). Therefore: v = vu and dl = − dlu . So, considering [1.52], equation above is written as:

22

Electromagnetic Waves 1

       df = −neSdlv ∧ B = nevS dl ∧ B = I dl ∧ B

[1.54]

 We find the expression of the Laplace force acting on the conductor element dl  placed in a magnetic field B.

1.1.2.3. Biot–Savart law

The Biot–Savart law is used to determine the magnetic field created by a circuit crossed by an electric current of intensity I (Figure 1.11). An element with a length  dl of the circuit situated at point M is orientated in the sense of the current  circulation. Element dl is small enough to resemble a rectilinear portion. The     magnetic field dB created by element dl has a sense such that the trihedron ( dl , u ,   dB) is direct. The magnetic field dB created at point P is proportional to I/r2 and is expressed using equation:    µ0 I dl ∧ u dB = 4π r 2

[1.55]

Considering all the infinitesimal contributions of elements with a length dli, we express the magnetic field created by the circuit (C), i.e.:    µ0 I dl ∧ u B= 4π (C ) r 2



[1.56]

The fundamental equation [1.56] describes the Biot–Savart law. In the case where there are several independent circuits, vector addition is then extended to all circuits. →

dB

P (C)

r →

I

M

u →

dl

 Figure 1.11. Magnetic field dB created by an element  with a length dl of a circuit (C)

Maxwell’s Equations

23

P



j



u M

r

dV (V)

Figure 1.12. Current distribution within volume V

Let us consider the case of a current distribution within volume V (Figure 1.12). For this distribution, the field created at point P is given by the Biot–Savart law expressed in the form:  µ0 B= 4π

  j ∧u

(V )

r2

[1.57]

dV

Jean-Baptiste Biot was a French physicist, astronomer and mathematician. Biot formulated, with his collaborator Félix Savart, the Biot–Savart law, making it possible to determine the magnetic field created at a given point in space, by an electric current passing through a conductor. Félix Savart was a French surgeon and physicist. He became famous in physics for the Biot–Savart law in particular. Box 1.7. Biot (1774–1862) and Savart (1791–1841)

1.1.2.4. The local law verified by the magnetic field, magnetic field flux

In the case of the electrostatic field, we have established the local form of Gauss’s theorem [1.22] constituting one of Maxwell’s fundamental equations in a vacuum. We propose, in what follows, to obtain the magnetostatic equivalent of this theorem. To do this, let us express the divergence of the magnetic field using [1.57]. We obtain:   µ ∇⋅B = 0 4π

   J ∧ u µ dV = 0 ∇⋅ 2 (V ) 4π r



    u  ∇ ⋅  J ∧  dV (V ) r2  



Let us consider the vector analysis equation:

         ∇ ⋅ ( f ∧ g ) = g ⋅ (∇ ∧ f ) − f ⋅ (∇ ∧ g )

24

Electromagnetic Waves 1

The divergence of the magnetic field is written as:   µ ∇⋅B = 0 4π

   u      u   ⋅ ∇ ∧ − ⋅ ∇ ∧ ( ) J J     dV (V )  r 2 r 2    



[1.58]

 The divergence of a vector f in spherical coordinates is given by:   1 ∂ (r 2 f r ) 1 ∂ (sin θ fθ ) 1 ∂fϕ ∇⋅ f = + + 2 ∂r ∂θ r sin θ r sin θ ∂ϕ r   u Let’s put f = . Then we obtain: r      u  1 d  2 1  1 d 1 ∇ ⋅ f = ∇ ⋅   = r × = (r ) = 2 2 dr  2 r r dr  r r   r

This result allows us to write (the rotational of a gradient being zero):       u   u  u    u      1     ∇ ⋅   × u =  ∇∧ = ∇ ∧ ∇ ⋅  × u = ∇ ∧ ∇   = ∇ ∧ ∇ f = 0 2 2 r r r r  r

In addition, the magnetic field is created at P. Therefore the nabla only acts on the coordinates of point P and not on those of point M or those of the current density    vector (Figure 1.12). So, ∇ ∧ J = 0 . With that being said, [1.59] is written as follows:   ∇⋅B = 0

[1.59]

The local law [1.59] is general. Whatever the current distribution, the divergence of the magnetic field is equal to zero. Using the divergence theorem, we establish the macroscopic equivalent of local law [1.59]. The flux of the magnetic field through a closed surface S enveloping the volume V is equal to:  

 

(S ) B ⋅ dS = (V ) (∇ ⋅ B)dV = 0

[1.60]

Thus, whatever the current distribution, the flux of the magnetic field through a closed surface S is zero. This integral law is general.

Maxwell’s Equations

25

1.1.2.5. Circulation of the magnetic field, Ampère’s theorem

Let us take closed contour (C) on which surface (S) is based. The current lines are randomly orientated, as shown on Figure 1.13. →

J

(C) →



n

(S)

dl M



e



B

Figure 1.13. Circulation of a magnetic field on a contour (C)

The circulation of a magnetic field on a contour (C) is equal to:

C=

(C) B ⋅ dl

[1.61]

According to Ampère’s theorem, the circulation of the magnetic field along a closed contour is equal to the product of the magnetic permeability µ0 of the vacuum by the algebraic sum I of the current intensities crossing the contour. Therefore:

(C) B ⋅ dl = µ0I

[1.62]

  If n is the unit vector normal to the surface based on contour (C) and if e indicates the sense of the magnetic field, the algebraic sum I in [1.62] is positive     if n ⋅ e > 0 and negative if n ⋅ e < 0.  NOTE.– With the sense of the elementary displacement dl being that of the orientation  chosen arbitrarily on the contour (C), the sense of the unit vector n is then defined  starting from the direction of the vector dl by applying, for example, the right-hand rule.

1.1.2.6. Rotational of the magnetic field, local formulation of Ampère’s law

In section 1.1.1, we showed that the rotational of the electrostatic field is zero. In this section, we aim to find the magnetostatic equivalent of this rotational. Using [1.62], we obtain the following by applying Stokes’ law:

(C ) B ⋅ dl = ( S ) (∇ ∧ B ) ⋅ dS = µ0 I

[1.63]

26

Electromagnetic Waves 1

By replacing, in [1.63], the intensity I with its expression [1.45], in which the variables r and t are omitted, we get: 

 

 

(S ) (∇ ∧ B) ⋅ dS = µ0 (S ) J ⋅ dS

This equality is true whatever the contour (C) and the surface (S) based on it, we ultimately obtain:

   ∇ ∧ B = µ0 J

[1.64]

Equation [1.64] expresses the local form of Ampère’s law. It is one of Maxwell’s fundamental equations in steady state processes. 1.1.2.7. Vector potential, Coulomb gauge

Knowing that the divergence of a rotational is zero from the local law [1.59], the  magnetic field derives from the rotational of a vector field noted A . This vector field is known as the vector potential defined by the equation:    B =∇∧ A

[1.65]

To express the vector potential, we will proceed by analogy with the scalar potential. Using the local law [1.64], equation [1.65] gives:       ∇ ∧ B = ∇ ∧ ∇ ∧ A = µ0 J

Let us consider the following equation of the vector analysis:

         f ∧ g ∧ h = g ⋅ ( f ⋅ h) − h ⋅ ( f ⋅ g ) Equation [1.66] is transformed as follows:           ∇ ∧ ∇ ∧ A = ∇ ⋅ (∇ ⋅ A) − A ⋅ (∇ ⋅ ∇) = µ0 J

i.e.:        ∇ ⋅ (∇ ⋅ A) − (∇ ⋅∇) ⋅ A = µ0 J

[1.66]

Maxwell’s Equations

27

By introducing the Laplacian, we find:

     ∇ ⋅ (∇ ⋅ A) − Δ A = µ0 J

[1.67]

 Equation [1.65] does not allow us to clearly define the vector potential A. Knowing that the rotational of a gradient is zero, the expression [1.65] is also    verified if we change A into A0 + ∇Φ.

To define a vector potential best adapted to the problem studied (i.e. the vector potential that simplifies the calculation the greatest), we introduce a condition on the vector potential known as the gauge fixing. The vector potential is therefore defined as the vector field satisfying equation [1.65] and the Coulomb gauge given by the equation:   ∇⋅ A = 0

[1.68]

Considering the Coulomb gauge, equation [1.67] becomes: 



Δ A + µ0 J = 0

[1.69]

The differential equation [1.69] is analogous to Poisson’s equation [1.64]:

ΔV +

ρ =0 ε0

The solution of this equation is formed according to [1.15b] (here, we denote the volume by τ and not by V to avoid confusion with the potential V): V=

ρ dτ

(τ ) 4πε 0 r

[1.70a]

The solution of the differential equation [1.70] is then in the following form:  A=

 µ0 J dτ (τ ) 4π r



[1.70b]

 In [1.70b], A designates the vector potential created at point P in space by the  distribution of current J inside volume τ (Figure 1.12).

28

Electromagnetic Waves 1

We can determine [1.70b] from a direct calculation using the Biot–Savart law [1.67]. For this, we rewrite the magnetic field in the following form:  µ0 B= 4π

(τ )

  J ∧u r2

µ dV = − 0 4π

 u



(τ ) r 2 ∧ J dτ

[1.71]

The last equality in equation [1.71] is justified by the property of the vector     product f ∧ g = − g ∧ f . Expression [1.70b] shows that the vector potential is the integral of a function in 1/r. This transforms the term in 1/r2 in [1.71] into a function in 1/r. For this, we express the gradient of the scalar function f (r) = 1/r. In spherical coordinates, we get:  ∂f  1 ∂f  1 ∂f  er + eθ + eϕ ∇f = r ∂θ r sin θ ∂ϕ ∂r

Using this equation, we find:    1  d  1   1  ∇ f = ∇   =   er = − er  r  dr  r  r2   Knowing that in [1.71] er = u , we can write: −

 u

   1   ∧ J = ∇  ∧ J r r2

Expression [1.71] then gives:  µ0 B= 4π

  1  

µ





(τ ) ∇  r  ∧ J dτ = 4π0 (τ ) ∇ f ∧ j dτ

[1.72]

Let’s take into account the vector equation:

            ∇ ∧ ( f g) = f ∇ ∧ g + ∇ f ∧ g  ∇ f ∧ g = ∇ ∧ ( f g) − f ∇ ∧ g Considering the last member of [1.72] and the last vector equation above, we can write (bearing in mind that the nabla operator does not act on the current density vector):            1     J  ∇ f ∧ J = ∇ ∧ ( f J ) − f ∇ ∧ J = ∇ ∧ ( f J )  ∇   ∧ J = ∇ ∧   r r

Maxwell’s Equations

29

Using the last equality above, expression [1.72] gives:  µ0 B= 4π

  J  µ ∇ ∧ dτ = ∇ ∧ 0 (τ ) r 4π



 J dτ (τ ) r



[1.73]

If we compare [1.73] and [1.65], we find that:  µ0 A= 4π

 µ J dτ = 0 (τ ) r 4π



 I dl dτ (τ ) r



[1.74]

The last equality in equation [1.74] can be established using the Biot–Savart law [1.56]. NOTE.– When studying the properties of electromagnetic waves, instead of the  Coulomb gauge one uses the Lorentz gauge, which links the vector potential A and the scalar potential V (see section 1.1.4.5):    1 ∂V ∇ ⋅ A + 2 ∂t = 0 c    A (∞) = 0 ; V (∞) = 0. 

[1.75]

1.1.2.8. Circulation of the vector potential

The expression of the circulation of the vector potential along a closed contour allow us to determine its physical sense and its unit. Using Stokes’ theorem, we get:

(C ) A ⋅ dl = ( S ) (∇ ∧ A) ⋅ dS

[1.76]

Using equation [1.65] defining the vector potential, [1.76] becomes:

(C ) A ⋅ dl = ( S ) B ⋅ dS = Φ

[1.77]

therefore, the circulation of the vector potential along a closed contour (C) is equal to the flux of the magnetic field across a surface (S) based on this contour. Considering equation [1.77], we can write that Adl = Φ. Knowing that the magnetic flux is expressed in weber (Wb), the vector potential is expressed in weber per meter (Wb ⋅ m− 1).

30

Electromagnetic Waves 1

1.1.2.9. Electrostatic dipole/magnetic dipole analogy

The electrostatic dipole was already studied in section 1.1.1 (Figure 1.7a). To make the electrostatic dipole-magnetic dipole analogy, it is necessary to study the magnetic dipole. Here we consider a circular coil with radius a, axis Oy and traversed by a constant current with intensity I (Figure 1.14). The coil traversed by a current behaves as a magnetic dipole. The magnetic  moment M of this dipole is a vector normal to the plane of the coil. Its orientation depends on the positive sense defined by the sense of the traveling current. In what follows, we are also interested in the calculation of the magnetic field at a point P far from the coil (OP = r >> a). The chosen plane zOx is that of the coil. P

y →

M



ey

x

r



er

a →

dl

O I

z

Figure 1.14. Magnetic dipole composed of a circular coil with magnetic moment M

By definition, the moment magnetic is given by the equation:    M = I S = π a2 I e y

[1.78]

 Moment M is therefore orientated according to axis Oy. To make the electric dipole-magnetic dipole analogy, below we give the schemas of an electric dipole (Figure 1.15a) and a magnetic dipole (Figure 1.15b) composed of the coil, as shown in Figure 1.14. By definition, the electric dipole moment is given by equation [1.28]   where we replaced p by M :    M = q AB = qau

[1.79]

The scalar potential [1.71] can be written in the following form: V=

1

  M ⋅ er

4πε 0

r2

[1.80]

Maxwell’s Equations

y

P



→ er

M



M

r



θ u

–q



er r

θ u→

x +q

O

P

y → ey

31

x

O

a a) Dipôle électrique a)

b) Dipôle magnétique b)

Figure 1.15. Analogy a) electric dipole; b) magnetic dipole

By making the analogy 1/4πε0 ↔ µ0/4π, the vector potential can be written in the following form [1.80]:    µ0 M ∧ e r A= 4π r 2

[1.81]

The potential and the components of the electrostatic field created by the electrostatic dipole (Figure 1.15a) in cylindrical coordinates are given by expressions [1.32] and [1.33], in which we replace p with qa: V=

1

qa cos θ

4πε 0

r2

Er =

1 4πε 0

qa 2 cos θ r

3

; Eθ =

1

qa sin θ

4πε 0

r3

; Ez = 0

[1.82]

What is left is to determine the components of the vector potential and the   magnetic field vector. According to Figure 1.15b, knowing that u = e x , we obtain:        M ∧ er = M e y ∧ (cos θ e x + sin θ e y ) = M cos θ e y ∧ e x   = − M cos θ e z = − I π a 2 cos θ e z

The components of the vector potential [1.81] are therefore equal to: Ar = 0 ; Aθ = 0 ; Az = −

μ0 I π a 2 cos θ 4π r2

[1.83]

32

Electromagnetic Waves 1

   The magnetic field is linked to the vector potential by the equation B = ∇ ∧ A .  Moreover, the components of the vector field rotational f in cylindrical coordinates

are written:    1 ∂f z ∂fθ    ∂f r ∂f z   1  ∂ (r fθ ) ∂f r ∇∧ f = −  er +  ∂z − ∂r  eθ + r  ∂r − ∂θ r z ∂ ∂ θ     

  ez 

Using this equation and the components [1.83] of the vector potential, we determine the components of the magnetic field as follows:  µ I π a 2 sin θ ∂A  1 ∂Az ∂Aθ  − =− θ = 0  Br =   4π ∂z  ∂z 1  ∂ (rAθ ) ∂Ar   r ∂θ r3 ; Bz =  −  r  ∂r ∂θ ∂Az µ0 I π a 2 2 cos θ   ∂Ar ∂Az   Bθ =  ∂z − ∂r  = − ∂r = 4π   r3 

 =0 

[1.84]

The electrostatic dipole/magnetic dipole analogy is presented in Table 1.2. Electric variable Electric dipole moment Electric potential

M = qa

V= Er =

Electric field

  M ⋅ er

1 4πε 0 1

r2 qa 2 cos θ

4πε 0

r3

Eθ =

1

qa sin θ

4πε 0

r3

Magnetic variable Magnetic dipole moment Vector potential

M = Iπa2

   µ0 M ∧ er A= 4π r 2

Br = Magnetic field

Bθ =

µ0 I π a 2 sin θ 4π r3 µ0 I π a 2 2 cos θ 4π r3

Ez = 0

Bz = 0

Table 1.2. Electrostatic dipole/magnetic dipole

1.1.2.10. Fundamental laws of magnetostatics

The fundamental laws of magnetostatics established in this section are summarized in Table 1.3.

Maxwell’s Equations

Circulation of the magnetic field (integral form of Ampère’s law)

(C )

Rotational of the magnetic field (local form of Ampère’s law)

Magnetic field and vector potential equation

   ∇ ∧ B = μ0 j

   B =∇∧ A

Local law of magnetic field

Local law of the vector potential

  ∇⋅B = 0

Δ A + μ0 j = 0

  B ⋅ dl = μ0 I

Magnetic field flux

(S )

33

  B ⋅ dS = 0







Table 1.3. Fundamental laws of magnetostatics

This table contains several formulations of laws in magnetostatics. In practice, one applies the formulation best suited to the problem studied. 1.1.3. Electromagnetic induction3 1.1.3.1. Experimental evidence In 1831, Faraday discovered the induction phenomenon from the relative motion between a U-shaped magnet and a coil. In practice, we use a straight magnet, a coil and a galvanometer (Figure 1.16) to highlight this phenomenon.

a)

b)

Figure 1.16. a) Magnet far from the coil axis: an electric current occurs; b) magnet close to the axis of the current: an electric current occurs

3 (Annequin and Boutigny 1974; Bok and Hulin-Jung 1979; Bruneaux et al. 2002; Krempf 2004; Benson 2015; Sakho 2018).

34

Electromagnetic Waves 1

The straight magnet is moved along the axis of a coil (Figure 1.16b) or away from it (Figure 1.16a). According to the direction in which the magnet is moved, the galvanometer needle deviates either to the right (Figure 1.16b) or to the left (Figure 1.16a). This justifies the generation of an electric current of intensity i, whose sense depends on the direction in which the magnet is moving. This current, induced by the displacement of the magnet, is called the induced current. The phenomenon that gives rise to the induced current is called electromagnetic induction. The moving magnet is the inductor and the coil is the armature. By fixing the magnet (the armature) and by moving the coil (the inductor), we observe the same phenomenon: the phenomenon of induction appears during a relative displacement of an inductor and an induced current (Figure 1.16b). By definition, electromagnetic induction is the phenomenon of producing electrical effects from magnetic fields. As we pointed out earlier, the induced current i changes direction depending on whether one brings the magnet closer or moves it away. The direction of the current i is governed by Lenz’s law, which states the following: the direction of the induced current is such that it opposes the change that created it. When the magnet is brought closer, the lines of the magnetic field become more and more concentrated across the coil; the induced current opposes this increase in magnetic flux (Figure 1.16b). When moving the magnet away: the lines of the magnetic fields decrease across the coil; the induced current opposes this decrease in flux (Figure 1.16a). The direction of the induced current is therefore linked to the variation in magnetic flux through the coil. Michael Faraday was a British physicist and chemist. In 1831, Faraday discovered the very important phenomenon of induction from the relative movement between a Ushaped magnet and a coil. He also became famous through the formulation of Faraday’s law of induction in 1834 on electromagnetic induction (this law, based on Faraday’s work in 1831, was published by Lenz in 1834). Heinrich Friedrich Emil Lenz was a German physicist. Appointed as professor at the Saint Petersburg Imperial University, there he repeated Faraday’s experiments. This allowed him to state the law indicating the direction of the induced current (Lenz’s law) in 1833. Lenz is especially famous for this important law relating to electromagnetic induction. Box 1.8. Faraday (1791–1867) and Lenz (1804–1865)

Maxwell’s Equations

35

1.1.3.2. Lagrangian of a particle in an electromagnetic field

  By definition, the electromagnetic field is the sum of the vector fields ( E , B). The properties of an electromagnetic field at a point in space are determined by the   properties of the electric field E and the magnetic field B at the point considered. In electromagnetism, it is stated that any charged particle is characterized by its mass m and its electric charge q. These two characteristics are independent of the chosen Galilean reference frame. In addition, for a relativistic particle in motion  with velocity v in the electromagnetic field, it is defined a physical variable known as the Lagrangian L. It is assumed that: L = − mc 2 1 −

v2 c

2

  + q( A ⋅ v − V )

[1.85]

In the second term of equation [1.85]: – the first term corresponds to the Lagrangian of the free particle (not subject to a force field); – the second term is the Lagrangian of the particle subject to an electromagnetic   field with A the four-potential of components: A( Ax , Ay , Az ,V / c) , Ax(x, y, z, t), Ay

x, y, z, t) and Az x, y, z, t) and V = V(x, y, z, t) is the scalar potential. 1.1.3.3. Definitions of electric field and magnetic field  Any point charge q in motion with velocity v in the electromagnetic field   ( E , B ), is subjected to the electromagnetic force known as the Lorentz force defined by the equation:     f = q( E + v ∧ B)

[1.86]

To define the electric field and the magnetic field, one must determine the expression of the electromagnetic force [1.86] from the fundamental equation of dynamics [1.87] and Lagrange equations of the particle [1.88]:

36

Electromagnetic Waves 1

   d p  mv ; p= f = dt 1 − v2 / c2

[1.87]

d ∂L ∂L − =0 dt ∂u ' ∂u

[1.88]

Equation [1.88] corresponds to the Lagrange equation of the particle relative du to the generalized coordinate u (u = x, y or z); u ' = = vu where vu is the velocity dt component according to u: vu (vx, vy, vz). Using [1.85], it becomes: L = − mc

2

1−

(v x + v y + v z ) 2 c2

+ q( Ax vx + Ay v y + Az vz − V )

[1.89]

With the axes Ox, Oy and Oz being equivalent (since space is isotropic), we express the Lagrange equation of the particle relative to coordinate x. Using [1.89], we obtain: 2 ∂L ∂L 1  2v   (vx + v y + vz )   = = −mc2  − x  × 1 − ∂u ' ∂vx 2  c2    c2  

−1/ 2

+ qAx =

m

dx + qAx v2 dt

1− 2 c

In addition: ∂Ay ∂Ay  ∂A  ∂Ax ∂A ∂A ∂V  ∂L ∂L ∂V  vy + Z vz − = = q  x vx + + vy + vz Z −  = q  vx  ∂u ∂x ∂x ∂x ∂x  ∂x ∂x ∂x   ∂x  ∂x

Using these two results, the Lagrange equation of the particle relative to coordinate x is written:      dx ∂Ax dy ∂Ay dz ∂Az ∂V   d  m dx + qAx  − q  + + −  = 0  dt   dt ∂x dt ∂x dt ∂x ∂x  v 2 dt   1− 2  c  

Maxwell’s Equations

37

Simplifying this equation, we find:     ∂Ay  ∂A ∂A ∂V  d  mx ' + qAx  − q  x ' x + y ' + z' z −  2 ∂x ∂x ∂x dt   ∂x v   1− 2  c  

  = 0 

[1.90]

In the first term, between the parentheses of the right term in equation [1.90], we find the expression of impulsion [1.87] relative to coordinate x: px =

mvx 2

v 1− 2 c

=

m 2

v 1− 2 c

dx = dt

mx ' v2 1− 2 c

Now [1.90] is written as: ∂A  ∂A ∂A ∂V  d ( px + qAx ) − q  x ' x + y ' y + z ' z −  = 0 ∂x ∂x ∂x  dt  ∂x

i.e.: ∂Ay  ∂A dp x dA ∂A ∂V + q x − q  x ' x + y ' + z' z − ∂x ∂x ∂x dt dt  ∂x

  = 0 

[1.91]

Knowing that Ax = Ax(x, y, z, t), the differential of Ax with respect to time is equal to: dAx ∂Ax ∂x ∂Ax ∂y ∂Ax ∂z ∂Ax ∂Ax ∂A ∂A ∂A x '+ x y '+ x z '+ x = + + + = dt ∂x ∂t ∂y ∂t ∂z ∂t ∂t ∂x ∂y ∂z ∂t

Using this result, expression [1.91] gives: ∂Ay  ∂A dp x ∂A ∂A ∂A   ∂A ∂A ∂V + q  x x '+ x y '+ x z '+ x  − q  x ' x + y ' + z' z − ∂y ∂z ∂t  ∂x ∂x ∂x dt  ∂x  ∂x

  = 0 

38

Electromagnetic Waves 1

Rearranging this equation, we get: ∂Ay ∂Ax  ∂A dp x ∂A ∂A ∂A ∂A ∂V  z '− z ' z + x − + q  x x '− x ' x + x y '− y ' + =0 ∂x ∂y ∂x ∂z ∂x ∂t ∂x  dt  ∂x

i.e.:  ∂A ∂Ay  dp x  ∂Ax ∂Az + qy '  x − −  + qz '  ∂x  ∂x dt  ∂z  ∂y

  ∂Ax ∂V  + q  ∂t + ∂x  

 =0 

Therefore:  ∂A ∂V  ∂Ay ∂Ax  dp x  ∂Ax ∂Az = q − x − + y '  − −  − z '  ∂x ∂y  ∂x dt  ∂z  ∂x  ∂t

    

[1.92a]

By circular permutation, the analogous equations relative to variables y and z are written as follows: dp y

 ∂A ∂Ay  ∂Ay ∂V = q − − + z '  z − ∂y ∂z dt  ∂t  ∂y

  ∂Ay ∂Ax −  − x '  ∂y   ∂x

     

[1.92b]

 ∂A ∂V dp z  ∂A ∂A = q − z − + x ' x − z ∂z ∂x dt  ∂z  ∂t

 ∂Az ∂Ay     − y '  ∂y − ∂z      

[1.92c]

By combining equations [1.92], we get:  dp y  dp  d p dp x  = ex + e y + z ez dt dt dt dt

[1.93a]

 ∂Ay  ∂A  ∂ A ∂Ax  ex + e y + z ez = ∂t ∂t ∂t ∂t

[1.93b]

 ∂V ∂V ∂V ∇V = − − − ∂x ∂y ∂z

[1.93c]

Maxwell’s Equations

39

The rotational of the vector potential is given by:    ∂A ∂Ay    ∂Ax ∂Az ∇ ∧ A =  z − −  ex +  ∂z  ∂x  ∂z  ∂y

 ∂Ax ∂Az     e y +  ∂x − ∂y  e z   

[1.94]

   We will now express the vector double product v ∧ ∇ ∧ A using expression [1.94] for the rotational of the vector potential. We obtain:      ∂A ∂Ay     ∂Ax ∂Az − v ∧ ∇ ∧ A = v ∧  z −  ex + v ∧  ∂z  ∂x  ∂z  ∂y

  ∂Ax ∂Az   e y + v ∧  ∂x − ∂y  

  ez 

[1.95]

As an example, we express the first expression of the right term of this equation:   ∂A ∂Ay       ∂Az ∂Ay   v ∧  z − −  e x = vx e x + v y e y + vz e z ∧   ex ∂z  ∂z   ∂y  ∂y

(

)

i.e.:   ∂A ∂Ay      ∂Az ∂Ay    ∂Az ∂Ay   v ∧  z − − −  e x = v y   e y ∧ e x + vz   e z ∧ e x ∂z  ∂z  ∂z   ∂y  ∂y  ∂y

Therefore:   ∂A ∂Ay    ∂Az ∂Ay    ∂Az ∂Ay   v ∧  z − − −  e x = −v y   e z + vz  ey ∂z  ∂z  ∂z   ∂y  ∂y  ∂y

Introducing the notation vu = du/dt = u’, we obtain:   ∂A ∂Ay    ∂Az ∂Ay    ∂Az ∂Ay   − − v ∧  z −  e x = − y '   e z + z '  ey ∂z  ∂z  ∂z   ∂y  ∂y  ∂y

[1.96a]

By adopting the same approach, we find, for the other two components of the vector double product [1.95]:    ∂Ax ∂Az    ∂A ∂A    ∂A ∂A   e y = x ' x − z  ez − z ' x − z  ex − v ∧   ∂x  ∂x  ∂x   ∂z  ∂z   ∂z  v ∧  ∂Ax − ∂Az  e = − x '  ∂Ay − ∂Ax  e + y '  ∂Ay − ∂Ax  e   y   x  z   ∂x ∂y  ∂y  ∂y   ∂x  ∂x 

[1.96b]

40

Electromagnetic Waves 1

Using [1.96], equation [1.94] is written as follows:     ∂A ∂Ay    ∂Az ∂Ay    ∂Ax ∂Az   v ∧ ∇ ∧ A = − y '  z − ez − −  e z + z '   e y + x '  ∂z  ∂z  ∂x   ∂z  ∂y  ∂y  ∂Ay ∂Ax    ∂Ay ∂Ax    ∂A ∂A   − z '  x − z  e x − x '  − −  e y + y '   ex ∂x  ∂y  ∂y   ∂z  ∂x  ∂x

We now need to arrange this expression to reveal that of the rotational vector potential. We intuitively obtain:      ∂Ay ∂Ax − v ∧ ∇ ∧ A =  y '  ∂y   ∂x

  ∂Ax ∂Az −  − z '  ∂x  ∂z 

   e x +  

  ∂Az ∂Ay    ∂Ax ∂Az   ∂Ay ∂Ax     ∂A ∂Ay    − − − − y '  z −  z '   − x '   e y +  x '   e z    ∂z  ∂y   ∂x  ∂z     ∂z  ∂x  ∂y   ∂y

[1.97]

Considering [1.97], the expressions [1.92a] are written, respectively, as follows:  dp x  ∂A ∂V      = q − x − + (v ∧ ∇ ∧ A) ⋅ e x   ∂x  ∂t   dt  dp y  ∂Ay ∂V      = q − − + (v ∧ ∇ ∧ A) ⋅ e y   ∂y  ∂t   dt  dp      z = q − ∂Az − ∂V + (v ∧ ∇ ∧ A) ⋅ e z  ∂z  ∂t   dt

[1.98]

Combining [1.93] and [1.98], the fundamental equation of dynamics [1.87] is ultimately written. Then we obtain:    d p      ∂ A  f = = q − − ∇V + v ∧ (∇ ∧ A)  dt  ∂t 

[1.99]

Comparing [1.99] to the electromagnetic force [1.86], we deduce the definitions of the electric field and magnetic field.

Maxwell’s Equations

41

 So, by definition, the electric field and magnetic field at point r in space at time t are given by the following expressions:         ∂ A(r , t )   ∂ A  − ∇V (r , t )  E = − − ∇V  E (r , t ) = −  ∂t ∂t               B (r , t ) = ∇ ∧ A(r , t ) B = ∇ ∧ A  

[1.100]

 In what follows, we will use the simplified expressions of the electric field E  and the magnetic field B by omitting point M and time t. 1.1.3.4. Electromotive field, induced electromotive force

Ri



B

R



B

C

C



dl



v

e i

VA – VC

A

A a)



Em b)

Figure 1.17. a) Portion AC of a conductor in motion in a magnetic field; b) electric circuit equivalent to conductor A

Let us consider AC as a portion of a dimensionally stable filiform conductor in   motion with velocity v in a magnetic field B that can vary with time (Figure 1.17a).  By definition, the electromotive field E m is given by:   ∂ A   Em = − +v ∧B ∂t

[1.101]

The electromotive force induced in the portion of the circuit AC is equal to the circulation of the electromotive force between points A and C: e=

C 

A

 E m ⋅ dl

[1.102]

42

Electromagnetic Waves 1

The potential difference between A and C is equal to: VA − VC = Ri − e

[1.103]

1.1.3.5. Maxwell-Faraday and Lenz-Faraday laws

Another definition of the electromotive force can be obtained from the electromagnetic force [1.86]. An electron of conductor AC is excited by the overall  motion at velocity v e and is driven by the movement of the conductor at velocity     v c . The overall velocity of an electron in the magnetic field is therefore v = v c + v e . The electromagnetic force [1.86] acting on an electron of the conductor is therefore:              f = q ( E + v ∧ B ) = q ( E + (v c + v e ) ∧ B ) = q ( E + v c ∧ B + v e ∧ B )

[1.104]

By definition, the electromotive force induced is equal to the circulation of force  f / q . So using [1.104]: e=

       f  ⋅ dl = ( E + v c ∧ B + v e ∧ B ) ⋅ dl (C ) q (C )





[1.105]

 Considering Figure 1.17a, we see that the element with length dl has the same     direction as the velocity v e of the movement of all electrons. Therefore ve ∧ dl = 0 . Hence [1.105] gives: e=

(C )

    ( E + v c ∧ B ) ⋅ dl

[1.106]

Equation [1.106] draws on two scenarios. 1st scenario: the conductor AC is mobile in a constant magnetic field

Considering [1.106], it becomes: e=

 



 

(C ) E ⋅ dl + (C ) (vc ∧ B) ⋅ dl

[1.107]

Maxwell’s Equations

43



dS

C →

n

dS

A

C’

→ ex



vc

O

x A’

Figure 1.18. Area swept by a section AC of the filiform conductor in motion

For induction phenomena independent of time, the rotational of the electric field is zero according to [1.12]. Using Stokes’ theorem, the first integral of the right term in equation [1.107] is transformed as follows:  



 

(C ) E ⋅ dl = (S ) (∇ ∧ E ) ⋅ dS = 0 The induced electromotive force [1.107] is written: e=



 

(C ) (vc ∧ B) ⋅ dl

[1.108]

Using Stokes’ theorem, the integral [1.108] is transformed as follows: e=





 

(S ) ∇ ∧ (vc ∧ B) ⋅ dS

[1.109]

To transform the vector double product in equation [1.109], we consider the following property:          g ∧ h ∧ k = h ⋅ ( g ⋅ k ) − k ⋅ ( g ⋅ h) Moreover, regardless of the considered current distributions, the divergence of the magnetic field is zero [1.59]. Equation [1.109] is written as: e=



 

  



(S ) vc ⋅ (∇ ⋅ B) − B ⋅ (∇ ⋅ vc ) ⋅ dS = − (S )

    B ⋅ (∇ ⋅ v c ) ⋅ dS

44

Electromagnetic Waves 1

Considering Figure 1.18, the last term in the above equation is written as follows: e=−



(S )

    B ⋅ (∇ ⋅ v c ) ⋅ dS = −



(S )

    (∇ ⋅ v c ) ⋅ ( B ⋅ dS )

Therefore: e=−



(S )

 d  dx      dx e x ⋅ dt e x  ⋅ ( B ⋅ dS )  

So, after simplification and rearrangement: e=−



(S )

   dΦ  B ⋅ dS = −    dt mov

[1.110]

The result [1.110] is the first law of electromagnetic induction: the electromotive force induced is equal to the opposite of the variation in magnetic flux across any surface (S) based on the circuit (C). The variation in flux is due to the variation in surface area swept by the moving conductor. This justifies the index mov in [1.110]. 2nd scenario: the conductor AC is fixed in a magnetic field variable with time

Considering [1.106], using Stokes’ theorem, it becomes: e=

(C )

  E ⋅ dl =

(S )

   (∇ ∧ E ) ⋅ dS

[1.111]

For time-dependent phenomena, we are more in the realm of electrostatics. Consequently, the rotational of the electric field is therefore not zero. The electric field is given by the first of equations [1.100]:   ∂ A  E=− − ∇V ∂t

The rotational of the electric field is written as:     ∂∇ ∧ A   ∇∧E = − − ∇ ∧ ∇V ∂t

[1.112]

Maxwell’s Equations

45

      Knowing that ∇ ∧ ∇V = 0 and B = ∇ ∧ A , we find:    ∂B ∇∧E = − ∂t

[1.113]

Equation [1.113] is obtained by Maxwell and presented at the local level, Faraday’s experimental result on electromagnetic induction is known as the Maxwell-Faraday law. Using [1.112], we express the electromotive force [1.111] as a function of magnetic flux. We successively obtain: e=

     ∂ A    ∂∇ ∧ A  ∇ ∧  − − ∇V  ⋅ dS = − ⋅ dS − (S ) (S ) ∂t  ∂t 











(S ) ∇ ∧ ∇V ⋅ dS

That is to say:    ∂∇ ∧ A  ∂ B  e=− ⋅ dS = − ⋅ dS (S ) ( S ) ∂t ∂t





And ultimately: e=−

∂ ∂t



(S )

   ∂Φ  B ⋅ dS = −    ∂t  magn

[1.114]

Result [1.114] is the second law of electromagnetic induction: the electromotive force induced is equal to the opposite of the variation in magnetic flux across a surface (S) based on the circuit (C). The variation in flux is due to the variation in the magnetic field over time. This justifies the index magn. General case

Now let us generalize results [1.110] and [1.114] to any circuit (C) in motion in a magnetic field variable with time. The electromotive force induced is given by the equation: e=

     dΦ   dΦ  ( E + v c ∧ B ) ⋅ dl = −  −   (C )  dt  mov  dt  magn



[1.115]

46

Electromagnetic Waves 1

So, if:  dΦ   dΦ  = +  dt    total  dt  mov

 dΦ   dt    magn

we obtain:  dΦ  e = −   dt total

[1.116]

Equation [1.116] reflects the Lenz-Faraday law. The induction phenomenon only appears if there is a variation in magnetic flux over time across the considered surface. In practice, we refer to fundamental equations [1.110] and [1.114] according to the nature of the problem studied. We can therefore choose to fix the conductor and vary the magnetic field over time or consider a conductor in motion in a constant magnetic field. 1.1.3.6. Lorentz and Neumann inductions

Considering equation [1.115], it becomes:  dΦ  e = − −   dt  mov

 dΦ   dt    magn

[1.117]

Equation [1.117] highlights two types of electromagnetic induction: induction according to Lorentz and induction according to Neumann. Lorentz induction

In the case of Lorentz induction, the conductor is mobile in a stationary  (constant) magnetic field. The vector potential A is therefore constant and the electromotive field and induced electromotive force are written according to [1.101] and [1.102] as follows:    C   C    Em ⋅ dl = (v ∧ B ) ⋅ dl Em = v ∧ B ; e =

A

A

[1.118]

We find the expression [1.108] of the induced electromotive force by changing   v into v c . This gives [1.110] which we recall below:

Maxwell’s Equations

e=−

47

   dΦ  B ⋅ dS = −    dt  mouv



(S )

So, for a stationary magnetic field, the electromagnetic induction phenomena due to the variation in magnetic flux induced by the variation in surface swept by a conductor in motion is Lorentz induction. Neumann induction

In the case of Neumann induction, the conductor considered is immobile in a  time-dependent magnetic field. The vector potential A is therefore a function of time. Using equations [1.101] and [1.102], we express the electromotive field and the induced electromotive force. We therefore obtain:    C   C ∂ A  ∂A ;e= Em = − Em ⋅ dl = − ⋅ dl A A ∂t ∂t





[1.119]

We find expression [1.111] of the induced electromotive force. This gives the following result [1.114]: e=−

∂ ∂t



(S )

   ∂Φ  B ⋅ dS = −    ∂t  magn

For a fixed conductor, electromagnetic induction phenomena due to the variation of magnetic flux induced by the variation in the magnetic field is Neumann induction. Franz Ernst Neumann was an American mathematician, physicist and mineralogist. In the field of physics, he is most famous for his work on induction. He demonstrated before Helmholtz (1797–1878) that the phenomenon of electromagnetic induction can be studied via the conservation of energy. Working on electrodynamics, Neumann published the laws of induction between 1845 and 1847. Starting with work by Ampère (1775–1836), Neumann introduced in 1845 the important concept of “mutual potential” between two electrical circuits. The phenomenon of electromagnetic induction introducing the coefficients of mutual inductance between two electrical circuits is also called Neumann induction. Box 1.9. Neumann (1798–1895)

48

Electromagnetic Waves 1

1.1.3.7. Coulomb’s law

Here we refer to an electric conductor in equilibrium. Initially, the conductor is neutral (Figure 1.19a) then uniformly charged on the surface (Figure 1.19b). The surface charge density chosen is positive and denoted σ. The equilibrium condition of a conductor implies the immobility of its internal charges. →



Eint

Vint = 0



Vint = 0



Eint = 0

ρint = 0

Eint



n





Eint = 0

ρint = 0



Eint Neutral conductor a)



Eint

Charged conductor b)

Figure 1.19. Conductors in equilibrium

In a neutral conductor in equilibrium, the surface charge density or the volume charge density is zero, the electrostatic field is zero and the potential is constant (Figure 1.19a), i.e.:

σ = 0; ρint = 0; Eint = 0; Vint = Cte In a charged conductor in equilibrium, the charges can only be distributed across the surface: the surface charge density is therefore non-zero, the volume charge density is zero, the electrostatic field is zero and the electrostatic potential is constant (Figure 1.19b) i.e.:

σ ≠ 0; ρint = 0; Eint = 0; Vint = Cte In the vicinity of the surface of a charged conductor, the external electrostatic field is normal to the surface of the conductor and equal to:  σ  E ext = n

ε0

[1.120]

Maxwell’s Equations

49

 In this equation, the normal unit vector n is perpendicular to the surface and

orientated towards the exterior of the conductor (the surface of the conductor is closed). – If σ > 0, the electrostatic field is directed towards the exterior of the conductor (Figure 1.19b). – If σ < 0, the electrostatic field is directed towards the interior of the conductor. Result [1.120] reflects Coulomb’s law. According to this law, the electrostatic field lines of a charged conductor in equilibrium are normal to the surface of the conductor. Let us demonstrate Coulomb’s law [1.120] before continuing. If we consider an infinite flat surface, uniformly charged with a surface charge density σ > 0 (Figure 1.20). To apply Gauss’s theorem, we consider a cylinder with base surface S and height h. The total flux of the electrostatic field exiting the cylinder from the base surfaces dS and dS’ when the field changes from P to P’ is: Φ=



(S )

    Q  E ( z ) ⋅ dS + E (− z ) ⋅ dS ' = int   ε 0

Figure 1.20. Electrostatic field surrounding a flat charged surface

In addition: dS = dS’; E (z) =|E(− z)|; Qint = σS

[1.121]

50

Electromagnetic Waves 1

Hence, according to [1.121], the flux of the electrostatic field is: Φ = 2ES = σS/ε0 Ultimately, we obtain: E=

σ

[1.122]

2ε 0

Using result [1.122], the electrostatic field at points P and P’ is given by the respective equations:

σ    = ( ) E P n  2ε 0      E ( P ') = − σ n  2ε 0

[1.123]

When crossing the charged surface, the variation in the electrostatic field is written as: 





Δ E = E ( P) − E ( P ') =

σ  σ  σ  n+ n= n ε0 2ε 0 2ε 0

At point M located on the surface of the conductor, the electrostatic field is:  σ (M )  E (M ) = n

ε0

[1.124]

Coulomb’s law is therefore demonstrated. The physical interpretation of this theorem is clear: when crossing a charged surface, the normal component of the electrostatic field undergoes a discontinuity proportional to the surface charge density σ. The coefficient of proportionality is equal to 1/ε0. 1.1.3.8. Electrical energy density

Let us consider a set  of n conductors C1, C2, C3, …, Ci, …, Cn in equilibrium (Figure 1.21).

Maxwell’s Equations

C2

C1 C3

Ci

τ

M

51

Cn P



n



dS

() Figure 1.21. Conductors in equilibrium

The electrostatic field at point M is given by [1.124]. For a continuous charge distribution, the potential energy Wp is written as: Wp =

1 Vdq 2



At a point on the surface of the conductor i situated in volume V, we obtain: Wp =

1 2

1

(S )Vdq = 2 (S )V σ dS

[1.125]

If we take σ from expression [1.124] and then together with the result obtained in the above equation, it becomes: Wp =

ε0

(S ) 2

  [V E ⋅ n]dS =

ε0

(S ) 2

  [V E ] ⋅ n dS

So, by introducing the surface vector: Wp =

ε

 

(S ) 20 [V E ] ⋅ dS

[1.126]

Using the divergence theorem, we obtain from [1.126]: Wp = −

ε 



(τ ) 20 ∇ ⋅[V E ] dτ

[1.127]

52

Electromagnetic Waves 1

 The sign “–” in expression [1.127] is due to the fact that the unit vector n normal to the surface dS is directed inside the volume τ (Figure 1.21).

Let us take advantage of the vector analysis equation verified by any scalar function f:       ∇ ⋅ ( f g ) = f ∇ ⋅ g + g ⋅∇ f   Using this equation and considering the local law E = −∇V , the potential energy [1.127] is transformed as follows: Wp = −

   

1

(τ ) 2ε 0 V ∇ ⋅ E + E ⋅ ∇V  dτ

That is to say: Wp = −

1     2  dτ 

(τ ) 2ε 0 V ∇ ⋅ E − E

With the conductor in equilibrium, the volume charge density ρ = 0. According   to the local form of [1.164] Gauss’s theorem, ∇ ⋅ E = 0 . This gives: Wp =

1

 2

(τ ) 2 ε 0 E

dτ =

1

(τ ) 2 ε 0 E

2



[1.128]

Considering equation [1.128], the potential energy Wp appears to be distributed throughout the whole volume τ of space between the conductors with an electrical energy density we is equal to (omitting point M): we =

dW p

1 = ε0E2 dV 2

[1.129]

1.1.3.9. Magnetic volume energy density

This section concerns the distribution of conductors in equilibrium as shown in Figure 1.21. Volume τ is the site of a current distribution in steady state. Let’s   denote A( M ) and j ( M ) the vector potential and the current density vector at point M respectively. Using [1.70], we obtain:

Maxwell’s Equations

 A( M ) =

 µ0 j ( M )dV (V ) 4π r



53

[1.130]

We then proceed by analogy to establish the magnetic volume energy density. For a charge volume density distribution ρ, the potential energy Wp of the system of charges is given by the equation: Wp =

1 2

1

(τ )Vdq = 2 (τ )V ρ dτ

[1.131]

By analogy, the potential energy Wp of the current distribution in volume τ is deduced from expression [1.130] by replacing the scalar potential with the vector potential and the volume charge density with the current density vector. Therefore: Wp =

1 2

(τ )

  A JdV

[1.132]

Now in [1.132] we need to introduce the square of the magnetic field as in expression [1.128]. According to [1.25] and [1.26] we know that:       B = ∇ ∧ A and ∇ ∧ B = µ0 J

Let us consider the transformation equation for the divergence of the vector product of the vector potential and the magnetic field:           2   ∇ ⋅ ( A ∧ B) = B ⋅∇ ∧ A − A ⋅∇ ∧ B = B − µ0 A ⋅ J

This gives:      µ0 A ⋅ J = B 2 − ∇ ⋅ ( A ∧ B)

Using this result, expression [1.132] is written, omitting point M:

Wp =

B2 dτ − (τ ) 2 µ0



  

 τ ∇ ⋅ ( A ∧ B) dτ ( )

[1.133]

54

Electromagnetic Waves 1

Let us take into account the vector analysis equation verified by ordinary vectors:                f ∧ ( g ∧ h ) = g ⋅ ( f ⋅ h) − h ⋅ ( f ⋅ g ) = g ⋅ ( f ⋅ h ) − ( f ⋅ g ) ⋅ h    Using this result, knowing that B = ∇ ∧ A , we obtain the following, according to [1.134]:               ∇ ⋅ ( A ∧ B ) = ∇ ⋅  A ∧ (∇ ∧ A)  = ∇ ⋅ ∇ ⋅ ( A ⋅ A) − A ⋅ ( A ⋅∇) 

Given that the nabla vector is not an ordinary vector (it is an operator), it becomes:              ∇ ⋅ ( A ∧ B ) = ∇ ⋅ ∇ ⋅ ( A ⋅ A) − (∇ ⋅ A) ⋅ A = ∇ ⋅ (∇ A2 − ∇ A2 ) = 0

With this result, the magnetic potential energy [1.133] is written: Wp =

 τ (

B2 dτ ) 2 µ0

[1.134]

The magnetic potential energy [1.134] also appears to be distributed throughout volume τ of space between the conductors with a magnetic volume energy density wm equal to: wm =

dW p dV

=

B2 2µ0

[1.135]

1.1.4. Maxwell’s equations 1.1.4.1. Correction of Ampère’s law: displacement current

   Maxwell’s equations link the values of the electric field E = E (r , t ) and the

magnetic field B = B (r , t ) at infinitely neighboring points at infinitely neighboring ∂ρ dates. In a variable regime, ≠ 0 . Hence, according to the continuity equation ∂t [1.51]:

Maxwell’s Equations

  ∂ρ ∇⋅ J = − ≠0 ∂t

55

[1.136a]

Using the local law [1.64] of Ampère’s law, knowing that the divergence of a rotational is zero, we obtain:         ∇ ∧ B = µ0 J  ∇ ⋅ (∇ ∧ B ) = µ0 ∇ ⋅ J = 0

[1.136b]

Results [1.136a] and [1.136b] show that there is incompatibility between the charge conservation law [1.136a] and the local formulation of Ampère’s law [1.136b]. As the charge conservation law is a fundamental law of physics that has never been disproven experimentally, Maxwell chose to modify Ampère’s law to simplify it. He added the displacement current j d to the current density vector, defined by the equation: J d = ε0

∂E ∂t

[1.136c]

Ampère’s generalized law according to Maxwell is written:        ∂E  ∂E ∇ ∧ B = μ0  J + ε 0  = μ0 J + μ0ε 0 ∂t  ∂t 

[1.136d]

The displacement current [1.136c] concerns a fictitious current introduced to correct Ampère’s law so that it is compatible with the law of conservation of the electric charge in variable regime. However, the introduction of the displacement current into Ampère’s generalized theorem gives rise to all phenomena relating to the propagation of electromagnetic waves in space. Thus, Maxwell’s equations predict the propagation of electromagnetic waves. NOTE.– We can verify that Ampère’s generalized law [1.136] satisfies the charge conservation principle. Indeed, the divergence of a rotational is zero, so:            ∂E  ∂∇ ⋅ E ∇ ⋅ (∇ ∧ B ) = ∇ ⋅  μ0 J + μ0ε 0 =0  = 0  μ0 ∇ ⋅ J + μ0ε 0 ∂t  ∂t 

Considering the local formulation [1.25] Gauss’s theorem is:   ∇ ⋅ E = ρ / ε0

56

Electromagnetic Waves 1

Whereby:       ∂ρ ∂∇ ⋅ E ∇ ⋅ J + ε0 = 0  ∇⋅ J + =0 ∂t ∂t

1.1.4.2. Maxwell’s equation couples

Maxwell’s equations are grouped into equation couples: – the first couple corresponds to equations deduced from the definition of the electromagnetic field: Maxwell-Faraday equation and Maxwell-flux equation; – the second couple corresponds to equations concerning the local formulation of Gauss’s theorem and the generalization of Ampère’s law: Maxwell-Gauss equation and Maxwell-Ampère equation. First Maxwell equation couple

In a region of space based on a Galilean frame of reference where a vector    potential A = A(r , t ) and a scalar potential V = V (r , t ) coexistent, an electromagnetic    field occurs. This field is characterized by the electric field E = E (r , t ) and the    magnetic field B = B(r , t ) given by expressions [1.100] that we remember below:      ∂ A  E=− − ∇V ; B = ∇ ∧ A ∂t

Since the rotational of a gradient and the divergence of a rotational are zero, then:      ∂∇ ∧ A   ∂ B      ; ∇ ⋅ B = ∇ ⋅ (∇ ∧ A) = 0 ∇∧E = − − ∇ ∧ ∇V = − ∂t ∂t

Hence the first Maxwell equation couple is:      ∂B and ∇ ⋅ B = 0 ∇∧E = − ∂t

[1.137]

Maxwell’s Equations

57

Second Maxwell equation couple

As we have specified previously, the second couple of Maxwell equations summarizes the local formulation of Gauss’s theorem and the generalization of Ampère’s law, i.e.:    B    ρ ∂E and ∇ ⋅ E = ∇∧ = J + ε0 μ0 ∂t ε0

[1.138]

In the empty space of charges and currents, the electromagnetic waves propagate at the speed of light c such that: µ0ε 0 c 2 = 1  c =

1

[1.139]

µ0ε 0

In the international system: µ0 = 4π × 10 − 7 H ⋅ m − 1; ε0 = (1/36π109) F ⋅ m − 1; c = 3 × 10 8 m ⋅ s − 1

In Table 1.4, we recap Maxwell’s equations which constitute the fundamental equations of electromagnetism in a vacuum.

First couple

Second couple

   ∂B ∇∧E = − ∂t   ∇⋅B = 0    B  ∂E ∇∧ = j + ε0 μ0 ∂t   ρ ∇⋅E =

ε0

Maxwell-Faraday Maxwell-flux Maxwell-Ampère

Maxwell-Gauss

Table 1.4. The four Maxwell fundamental equations in a vacuum

With regard to Table 1.4, we notice that the Maxwell-flux and Maxwell-Gauss equations are asymmetrical. The divergence of the magnetic field is zero: the magnetic field is of conservative flux; which proves the absence of magnetic charges or magnetic monopoles. However, the fact that the divergence of the electric field is not zero conveys the existence of electric charges (the flow of the electric field is linked to all of the internal source charges of the field) or electric monopoles.

58

Electromagnetic Waves 1

1.1.4.3. Principle of superposition

The Maxwell equations in Table 1.4 are linear with respect to divergence operators, the rotational and the temporal partial derivative. We designate        ρ = ρ (r , t ) and J = J (r , t ) the field sources creating the electric field E = E (r , t )     and the magnetic field B = B (r , t ) . Similarly, we denote ρ1 = ρ1 (r , t ) and       J 1 = J 1 (r , t ) the field sources creating the electric E1 = E1 (r , t ) and the magnetic        B1 = B1 (r , t ) fields and we denote ρ 2 = ρ 2 (r , t ) and J 2 = J 2 (r , t ) the field    sources creating the electric E 2 = E 2 (r , t ) and the magnetic B 2 = B 2 (r , t ) fields. The resulting field sources and the electric and magnetic fields satisfy the principle of superposition. We obtain the following equations [1.140]:  ρ = λ1ρ1 + λ2 ρ 2      J = λ1 J 1 + λ2 J 2

    E = λ1 E1 + λ2 E 2       B = λ1 B1 + λ2 B 2

[1.140]

Note that the integration with respect to time of the differential equations,   obtained using Maxwell’s equations to determine the electric E and magnetic B fields, naturally gives rise to integration constants. These constants can be interpreted as static fields (electrostatic field and magnetostatic field). However, if the phenomena studied depend exclusively on time, these integration constants must be zero since they do not affect the phenomena studied. James Clerk Maxwell was a Scottish physicist. His fame is linked to the Maxwell distribution in statistical physics but above all to his important contributions in electromagnetism. The so-called Maxwell fundamental equations, established in 1864, unite electrostatics, magnetostatics and induction. Maxwell also owes his fame to the interpretation of light as an electromagnetic phenomenon based on the work of Faraday (1791–1867). Maxwell demonstrated in particular that the electric and magnetic fields propagate in space in the form of light waves (electromagnetic waves) at the speed of light. Box 1.10. Maxwell (1831–1879)

1.1.4.4. Invariance of the electromagnetic field

In a given frame of reference, the electromagnetic force [1.86] and the electric and magnetic fields [1.100] are individually determined. In other words, at each  point M in space and at any instant, there is a single electric field E and a single

Maxwell’s Equations

59

 magnetic field B . However, this exclusivity of the electric and magnetic fields is  not verified by the scalar V and vector A potentials, as we will demonstrate.

  Here we have two couples of potentials ( A , V) and ( A * , V*). We obtain both from the following figure:  – the magnetic field B being unique, is:          B = ∇ ∧ A = ∇ ∧ A *  ∇ ∧ ( A * − A) = 0

Given that the rotational of the gradient of a scalar function is zero, considering the scalar function ϕ, we obtain:    A* = A + ∇ϕ

[1.141]

 – the electric field E being unique, using [1.100], it becomes:      ∂ A  ∂ A *  ∂ ( A * − A)  E=− − ∇V = − − ∇V *  + ∇(V * − V ) = 0 ∂t ∂t ∂t

So, by referring to [1.141], we obtain:   ∂ϕ ∂    ∇ϕ + ∇(V * − V ) = 0  ∇  + (V * − V )  = 0 ∂ ∂t t  

This gives the equation between the scalar potentials V* and V: V* = V −

∂ϕ ∂t

[1.142]

Since the rotational of the gradient of a scalar function is zero, considering the scalar function ϕ, we obtain:    A* = A + ∇ϕ

[1.143]

CONCLUSION.– If an electromagnetic field corresponds to the couples of potentials  ( A , V), at a given point in space and at a given instant, the electromagnetic field

60

Electromagnetic Waves 1

  remains unchanged if the vector potential changes A into A * and the scalar potential changes V into V* such that:    ∂ϕ A* = A + ∇ϕ and V * = V − ∂t

In [1.142] and [1.143], ϕ is an arbitrary scalar function. 1.1.4.5. Coulomb and Lorentz gauges

Equations [1.142] show that there are several scalar potentials and several vector potentials that can generate the same electromagnetic field [1.100]. In practice, the most appropriate vector and/or scalar potential must be chosen for the problem studied. Usually, the potential chosen is the one that allows the calculations to be simplified as much as possible. For this, we impose conditions on the vector  potential A and the scalar potential V. Choosing the potential best adapted to the problem studied is known as gauge fixing. Let us consider the Maxwell-Gauss and Maxwell-Ampère equations from Table 1.4:     ρ  B  ∂E and ∇ ∧ ∇⋅E = = J + ε0 ε0 ∂t μ0

Given that:   ∂ A     E= − ∇V and B = ∇ ∧ A ∂t

it becomes:      ∂ A   ρ ∇ ⋅ E = −∇ ⋅  + ∇V  =  ∂t  ε0        ∂  ∂ A   ∇ ∧ B = ∇ ∧ ∇ ∧ A = μ0 J − μ0ε 0  + ∇V  ∂t  ∂t 

[1.144]

Maxwell’s Equations

61

So:        ∂  ∂ A   ∂∇ ⋅ A   ρ and ∇ ∧ ∇ ∧ A = μ0 J − μ0ε 0  + ∇V  + ∇ ⋅∇V = − ∂t  ∂t ε0 ∂t 

Considering the vector identity equations:

         ∇ ⋅∇ f = Δ f and ∇ ∧ ∇ ∧ f = ∇(∇ ⋅ f ) − Δ f We therefore obtain:         ∂∇ ⋅ A ρ ∂  ∂ A   and ∇(∇ ⋅ A ) − Δ A = μ0 J − μ0ε 0  + ΔV = − + ∇V  ∂t  ∂t ∂t ε0 

Let us arrange the last equality in the equations above. It becomes:        ∂V  ∂2 A ∇  ∇ ⋅ A + μ0ε 0  = Δ A − μ0ε 0 2 + μ0 J ∂t   ∂t

And ultimately:  

ρ ∂∇ ⋅ A ΔV + = ε0 ∂t

[1.145a]

       ∂2 A ∂V  Δ A − μ 0 ε 0 2 + μ0 J = ∇  ∇ ⋅ A + μ 0 ε 0  ∂t   ∂t

[1.145b]

Equation [1.145a] gives rise to Poisson’s equation [1.66] if the divergence of the vector potential is zero. This is the first gauge condition imposed on the vector potential expressing the Coulomb gauge [1.68]:

  ∇⋅ A = 0 The Coulomb gauge [1.68] is valid in the field of magnetostatics and electrostatics since the potential V is independent of time. This leads to a time independent radial electric field. For time-dependent phenomena, the Coulomb gauge is no longer valid. It must be corrected by imposing an additional condition

62

Electromagnetic Waves 1

on the scalar potential. The simultaneous choosing of the vector potential and scalar potential is called the Lorentz gauge, expressed by the following conditions: ∂V    =0 ∇ ⋅ A + μ0ε 0 ∂t     A(∞) = 0 ; V (∞) = 0 

[1.146]

Obtaining the divergence of the vector potential and inserting the result into equation [1.145a], and considering the Lorentz gauge [1.146], we obtain the analogous differential equations satisfied by the vector potential and the scalar potential:   ∂ 2V ρ 1 ∂ 2V ρ =0 =0 ΔV − μ0ε 0 2 + ΔV − 2 2 + ε0 ε0   ∂t c ∂t        ∂2 A     1 ∂ 2 A  Δ A − μ0ε 0 2 + μ0 j = 0  Δ A − 2 2 + μ0 j = 0 ∂t c ∂t  

[1.147]

The solutions to the differential equations [1.147] are known as retarded potentials, given by the following expressions:

V (r , t ) =

1

4πε 0 (τ ')

  µ A(r , t ) = 0 4π

(



 

ρ r ', t − r − r ' / c   r−r'

)dτ '

[1.148a]

    J r ', t − r − r ' / c dτ '   (τ ') r−r'

(



)



z

J →

r’

S

ρ





r – r’

dτ’ →

r

x

[1.148b]

M y

O

Figure 1.22. Sources (S) of charges and currents

Maxwell’s Equations

63

We can justify the presence of the term (t – c/r) in expressions [1.148] where c is the propagation velocity of electromagnetic waves in an empty space of charges and currents. This term satisfies the Principle of Causality according to which the causes precede the effects. In this case, the causes determined by the charge and current densities at source S precede the effects determined by the potentials created at point M (Figure 1.22). The creation of these potentials therefore creates a lag τ = r/c equal to the propagation time of waves from source S to point M. Thus, the scalar potential [1.148a] and the vector potential [1.148b] are created at time t – τ = (t – r/c). 1.1.4.6. Propagation equations   In the empty space of charges (ρ = 0) and currents ( J = 0 ), the Maxwell equations are written as follows (see Table 1.4):       ∂ B   ∂ E   ∇∧E = − ; ∇ ⋅ B = 0 ; ∇ ∧ B = μ0ε 0 ; ∇⋅E = 0 ∂t ∂t

[1.149]

The differential equation [1.147] satisfied by the vector potential is therefore written as: 

ΔA −

 1 ∂2 A c 2 ∂t 2

=0

[1.150]

Using [1.150], it becomes:   ∂   1 ∂ 2 A  ∂  ∂  1 ∂ 2 A   Δ A − 2 2  = (Δ A ) −  2 2  = 0 ∂t  ∂t  c ∂t  c ∂t  ∂t

So, considering [1.149]:    1 ∂ 2 E ∂  1 ∂2  ∂ A  A − Δ =0   = 0  ΔE − 2 ∂t c 2 ∂t 2  ∂t  c ∂t 2

( )

Also, for the magnetic field using [1.150], we find that:      1 ∂ 2 A      1 ∂ 2 A  ∇ ∧ Δ A −  = ∇ ∧ (Δ A ) − ∇ ∧  2 2  = 0 c 2 ∂t 2    c ∂t 

[1.151a]

64

Electromagnetic Waves 1

So, considering [1.149]:     1 ∂ 2 B 1 ∂ 2   Δ(∇ ∧ A ) − 2 2 (∇ ∧ A) = 0  Δ B − 2 2 = 0 c ∂t c ∂t

[1.151b]

Using [1.151], we obtain the propagation equations of the electric and magnetic fields that are analogous to the propagation equation [1.150] of the vector potential. Therefore:    1 ∂ 2 E  1 ∂ 2 B ΔE − 2 2 = 0 ; ΔB − 2 2 = 0 c ∂t c ∂t

[1.152]

The propagation equations [1.150] and [1.152] determine the equations for the evolution of an electromagnetic field during the propagation of electromagnetic waves in a vacuum. In what follows, we consider the particular case of plane waves and their propagation. 1.1.4.7. Electromagnetic energy density, Poynting identity

In section 1.1.2, we established the continuity equation [1.51] that reflects the charge conservation principle, which is shown below in its simplified form:   ∂ρ ∇⋅ J + =0 ∂t

[1.153]

Below, we will aim to find an equation analogous to [1.153] that describes the conservation of electromagnetic energy. To do this, we need to find the equivalents of volume charge density ρ and  current density vector J . Intuitively, the electromagnetic energy density w is equivalent to ρ. Considering the expressions of electrical energy density we [1.129] and magnetic energy density wm [1.135], the electromagnetic energy density w = we + wm is therefore given by the expression: 1 B2 w = ε0 E2 + 2 2µ0

[1.154]

Maxwell’s Equations

65

Now we will attempt to find the equivalent of the current density vector. First, we must express the power transferred by the electromagnetic field to a set of electric charges contained in volume V. Here we will consider the Maxwell-Ampère equation, which contains the current density vector, and the Maxwell-Faraday equation, which contains the temporal differential of the magnetic field. From Table 1.4, we take:         ∂E  ∂E   ∂B ∇ ∧ B = μ0  J + ε 0 = J + μ μ ε  0 0 0 ∂t  ∂t and ∇ ∧ E = − ∂t 

[1.155]

To obtain an equation between the electric and magnetic fields and the electromagnetic energy density from [1.155], we multiply the Maxwell-Ampère   equation by E / µ0 and the Maxwell-Faraday equation by B / µ0 , obtaining:   ∂ E   ∂  ε 0 E 2 1      E ⋅∇ ∧ B = J ⋅ E + ε 0 E ⋅ = J ⋅E +  µ0 ∂t ∂t  2  1    1  ∂ B ∂  B2 B ⋅∇ ∧ E = − B⋅ =−  µ0 µ0 ∂t ∂t  2 µ0

   

   

If we subtract the second equation from the first equation above, we obtain: 1         ∂  ε 0 E 2 B 2 ( E ⋅∇ ∧ B − B ⋅∇ ∧ E ) = J ⋅ E +  + 2µ0 µ0 ∂t  2

   

[1.156]

What remains is for us to transform the first term in the left part of [1.156]. For this, let us take advantage of the vector transformation equation:                   ∇ ⋅ ( f ∧ g ) = g ⋅ (∇ ∧ f ) − f ⋅ (∇ ∧ g )  ∇ ⋅ ( B ∧ E ) = E ⋅ (∇ ∧ B) − B ⋅ (∇ ∧ E )

Considering this result, equation [1.156] is written as: 1      ∂  ε 0 E 2 B 2  ∇ ⋅ (B ∧ E) = J ⋅ E +  +  2µ0  µ0 ∂t  2

66

Electromagnetic Waves 1

    Since B ∧ E = − E ∧ B , we obtain:     B ∇ ⋅  E ∧ µ0 

   ∂  ε 0 E 2 B 2 +  + J ⋅ E +  ∂t  2 2 µ0 

 =0  

[1.157]

Let us consider the case where the current density vector is perpendicular to the   electric field. In this case, J ⋅ E = 0 . Considering [1.154], equation [1.157] is written as follows:     B  ∂ω ∇ ⋅  E ∧ =0 + µ0  ∂t 

[1.158]

Equation [1.158] is analogous to the continuity equation [1.153]. The vector   B  is analogous to the current density vector J . E∧ µ0  The vector, often denoted R , is known as the Poynting vector, given by the following expression:    B R=E∧ µ0

[1.159]

As a result, equation [1.157] is known as the Poynting identity. Before moving onto the physical interpretation of the Poynting identity, we first   need to clarify the physical meaning of the scalar product J ⋅ E . For this, we consider a discrete distribution of charges contained in a domain with volume τ. Here, n is the volume charge density. Each electric charge in domain τ is subjected to an electromagnetic force [1.86]. The charge dQ = nqdτ contained in the elementary volume dτ is subjected to the force:        dF = dQ ( E + v ∧ B ) = nq ( E + v ∧ B ) dτ

The power developed by this force is given by the equation:       dP = dF ⋅ v =  nq ( E + v ∧ B ) dτ  ⋅ v

[1.160]

Maxwell’s Equations

67

   So, since ( v ∧ B ) ⋅ v = 0 :

         dP = nqE ⋅ v dτ + nq( v ∧ B) ⋅ v dτ = nqE ⋅ v dτ = nqv ⋅ E dτ   With the current density vector being J = nqv , the previous expression is

written as follows:   dP = J ⋅ E dτ

In the entire volume including all electric charges, we obtain: P=

 τ

( )

  J ⋅ E dτ

[1.161]

The power P is equal to the power transferred from the electromagnetic field to all electric charges contained in volume τ. Using the work-energy theorem, it becomes:

dEc =

dW = Pdt

Therefore, considering [1.161]: dEc = dt

 

(τ ) J ⋅ E dτ

[1.162a]

  Result [1.162a] shows that the product J ⋅ E is equal to the volumetric energy density:

duem =

dEc dt dτ

transferred by the electromagnetic field to the electric charges contained in the elementary volume dτ. Ec is the kinetic energy of the charge carriers present in volume τ.

68

Electromagnetic Waves 1

Now we will move onto the physical interpretation of the Poynting identity [1.157] which we will write below as follows:

    ∂ω ∇⋅R+ J ⋅E + =0 ∂t This then gives:      ∂ω  ∇⋅R= −  J ⋅E + ∂t  

Let us integrate the last equality in the whole volume τ. We obtain:  

 





 ∂ω 

(τ ) ∇ ⋅ R dτ = −  (τ ) ( J ⋅ E )dτ + (τ )  ∂t  dτ 

[1.162b]

Here S is the surface surrounding volume τ (Figure 1.23). →

(τ) dτ

R

dS



(S)

n

Figure 1.23. Surface S surrounding volume V containing charge carriers

Per the divergence theorem:

(τ )

  (∇ ⋅ R )dτ =

(S )

   ( ∇ ⋅ R ) ⋅ dS =

(S )

   ( ∇ ⋅ R ) ⋅ n dS

Using this result and [1.161], equation [1.162b] is written in the form:     dE ( ∇ ⋅ R ) ⋅ n dS = −  c + (S )  dt



 ∂ω 



(τ )  ∂t  dτ 

[1.162c]

Equation [1.162c] states that the Poynting vector flux over the surface (S) is equal to the decrease in the sum of kinetic energy Ec of the charge carriers and the electromagnetic energy w contained in volume τ.

Maxwell’s Equations

69

Also, in contrast to the continuity equation [1.153] expressing the conservation of electric charge, the electromagnetic energy is not conserved. In the case where the variation in kinetic energy is zero over time (Ec = Cte), equation [1.162c] is written alongside [1.153]:   ∂ω   ∂ρ ∇⋅R + = 0 ; ∇⋅ J + =0 ∂t ∂t

[1.163]

To express the conservation of electromagnetic energy, we proceed by analogy in the form of a table using equations [1.163]. The results obtained are summarized in Table 1.5. Conservation of charge

Conservation of electromagnetic energy

ρ: volume charge density

w: electromagnetic energy density

electric charge crossing a surface per unit time

Flux of R : electromagnetic power equal to the electromagnetic energy crossing a surface per unit time

 J : current density vector  Flux of J : current intensity equal to the



 R : Poynting vector

Table 1.5. Conservation of charge/conservation of electromagnetic energy analogy

1.1.4.8. Vector potential of the progressive electromagnetic plane wave  Let us consider an axis Ox of the unit vector e x , and an electromagnetic wave with the propagation direction Ox. By definition, a plane wave with direction Ox, is a wave whose vector potential is only a function of the x coordinate and time t: i.e.   A = A( x, t ) . The components of the vector potential are therefore in the form:

Ax (x, t); Ay (x, t); Az (x, t)   The vector potential satisfies the Coulomb gauge ∇ ⋅ A = 0 . In Cartesian coordinates, we obtain:   ∂A ( x, t ) ∂Ay ( x, t ) ∂Az ( x, t ) ∇⋅ A = x + + =0 ∂t ∂t ∂t

70

Electromagnetic Waves 1

So: ∂Ax ( x, t ) = 0  Ax ( x, t ) = A0 x = Cte ∂t

For time-dependent phenomena, choosing a vector potential for component Ax0 = Cte ≠ 0 is useless. Therefore Ax (x, t) = A0x = 0. So, using the propagation  equation [1.150] of the vector potential A (x, t), the partial differential equations satisfied by components Ay (x, t) and Az (x, t) are written as follows: ∂ 2 Ay ( x, t ) ∂x 2

= ε 0 μ0

∂ 2 Ay ( x, t ) ∂ 2 Az ( x, t ) ∂ 2 Az ( x, t ) = ε 0 μ0 ; ∂x 2 ∂t 2 ∂t 2

[1.164]

Equations [1.164] express the propagation equations of the vector potential components. As ε0µ0c2 = 1, equations [1.150] and [1.152] are written in the general form below: ∂ 2 s ( x, t ) ∂x 2

=

1 ∂ 2 s ( x, t )

c2

∂t 2

[1.165]

To integrate the differential equation [1.165], let s = s (χ,μ) with the following changes in variables:

χ (x, t) = χ = ct – x; μ (x, t) = μ = ct + x

[1.166]

Using [1.149], it becomes: ∂χ ∂μ = −1 ; = +1 ∂x ∂x

The partial derivatives are expressed as follows: ∂ 2 s ( x, t ) ∂x 2

and

∂ 2 s ( x, t ) ∂t 2

We successively obtain [1.167a]: ∂s ∂s ∂χ ∂s ∂µ ∂s ∂s = + =− + ∂x ∂χ ∂x ∂µ ∂x ∂χ ∂µ

[1.167a]

Maxwell’s Equations

∂2 s ∂x

2

∂2 s ∂x

2

=

71

∂  ∂s  ∂  ∂s ∂s  +    = − ∂x  ∂x  ∂x  ∂χ ∂µ 

=−

∂  ∂χ  ∂s ∂  ∂µ  ∂s ∂  ∂µ  ∂s ∂  ∂χ  ∂s − +   +       ∂χ  ∂x  ∂χ ∂µ  ∂x  ∂χ ∂µ  ∂x  ∂µ ∂χ  ∂x  ∂μ

So considering [1.167a]: ∂2 s ∂x 2

=

∂2 ∂χ 2



∂2 s ∂2s ∂2s ∂2 ∂2s ∂2s + − = + −2 ∂µ∂χ ∂µ2 ∂χ∂µ ∂χ 2 ∂µ2 ∂χ∂µ

[1.167b]

Similarly, with the changes to variables [1.166], we obtain:  ∂s ∂s  ∂s ∂s ∂χ ∂s ∂µ ∂s ∂s = + =c +c =c +  ∂t ∂χ ∂t ∂µ ∂t ∂χ ∂µ  ∂χ ∂µ  ∂2s ∂t

2

∂2s ∂t

2

=

[1.167c]

∂  ∂s  ∂  ∂s ∂s  +   =c  ∂t  ∂t  ∂t  ∂χ ∂µ 

=c

∂  ∂χ  ∂s ∂  ∂µ  ∂s ∂  ∂µ  ∂s ∂  ∂χ  ∂s +c   +c   +c     ∂χ  ∂t  ∂χ ∂µ  ∂t  ∂χ ∂µ  ∂t  ∂µ ∂χ  ∂t  ∂μ

So, considering [1.167b]: ∂2 s ∂t

2

= c2

∂2s ∂χ

2

+ c2

∂2s ∂2s ∂2s + c2 2 + c2 ∂µ∂χ ∂χ ∂µ ∂µ

And after arrangement:

 2 ∂2 s ∂2 s  2 ∂ s 2 c = + +    2 ∂µ2 ∂χ∂µ  ∂t 2  ∂χ

∂2 s

Using [1.167a] and [1.167c], equation [1.165] gives: ∂2 ∂χ 2

+

∂2s ∂µ2

−2

∂2s ∂2 s ∂2 s ∂2 s = + +2 ∂χ∂µ ∂χ 2 ∂µ2 ∂χ∂µ

[1.167d]

72

Electromagnetic Waves 1

So, after simplification: ∂ 2 s ( χ , µ) =0 ∂χ∂µ

[1.168]

Equation [1.168] can be written in the following form:  ∂  ∂s ( χ , µ)  ∂s ( χ , µ) = F (χ )   =0 ∂χ  ∂µ  ∂χ   ∂s ( χ , µ )  ∂  ∂s ( χ , µ)   ∂χ  ∂µ  = 0  ∂µ = F ( µ)   

If f (χ) and g(µ) are the primitives of functions F (χ) and G (µ), respectively, the general solution to equation [1.168] is in the form:

s (χ, µ) = f (χ) + g(µ) With the changes to variables [1.166], we find:

s (x, t) = f (ct – x) + g (ct + x)

[1.169]

Physically, the general solution [1.169] satisfies the superposition principle of plane waves. To confirm this assertion, let us place ourselves within the framework of de Broglie’s theory of matter waves. In this theory, the plane wave is a matter wave given by the expression:   Ψ(r, t ) = Ψ0ei (k ⋅r −ωt )  Ψ( x, t ) = Ψ0ei(kx −ωt )

Since the norm of the wave vector is k = ω/c, de Broglie’s plane wave, which propagates in the direction of axis Ox and in the direction of the unit vector   ω   e x  k = e x  is written as follows: c   Ψ ( x, t ) = Ψ 0 ei ( xω / c − ωt ) = Ψ 0 e −iω / c ( ct − x )

The plane wave above can be written in the form: Ψ ( x, t ) = Ψ 0 e − ik ( ct − x )

[1.170]

Maxwell’s Equations

73

So, according to expression [1.170], f (ct – x) is a plane wave that propagates in  the direction of axis Ox and in the sense of the unit vector e x (incident wave) whereas g (ct + x) is a plane wave that propagates in the direction of axis Ox  but in the opposite direction to the unit vector e x (reflected wave). Considering the four scalar functions κ, χ, ψ and φ, the components of the vector potential of the plane wave is generally written as follows:

 Ax ( x, t ) = 0   Ay ( x, t ) = κ (ct − x) + χ (ct + x)   Az ( x, t ) = ψ (ct − x) + ϕ (ct + x)

[1.171]

John Henry Poynting was a British physicist. He is known for his work on electromagnetism. He defined the Poynting vector, thus making it possible to account for the principle of energy conservation. Louis Victor de Broglie was a French mathematician and physicist. He is considered as the founder of wave mechanics thanks to his theory on matter waves or phase waves in 1923. His wave theory led to the advent of quantum mechanics in 1926. Box 1.11. Poynting (1852–1914) and de Broglie (1892–1987)

1.1.4.9. Transversality of the vector potential and electric and magnetic field of plane waves   For plane waves, ∇ ⋅ A = 0 . According to the Lorentz gauge [1.146], the scalar potential satisfies condition ∂V/∂t = 0. In a vacuum, the charge volume density ρ = 0. Hence, according to [1.147]: ∂ 2V ∂x

2

=

∂ 2V ∂t

2

=

∂  ∂V  ∂t  ∂t

 =0 

[1.172]

Taking [1.165] into account, the temporal variation in the electric field of component Ex is written, according to [1.101]: Ex = −

∂V ∂Ax ( x, t ) ∂V ∂A0 x ( x, t ) ∂V − =− − =− ∂x ∂t ∂x ∂t ∂x

74

Electromagnetic Waves 1

With reference to [1.172], we obtain: ∂E x ∂E ∂ 2V ∂  ∂V =− =0; x = −  2 t t  ∂x ∂x ∂ ∂ ∂x

∂  ∂V  =−  ∂x  ∂t 

 =0 

[1.173]

The first equality in [1.173] shows that component Ex (x, t) of the electric field is independent of the spatial coordinate x. The second equality shows that Ex (x, t) is also independent of the temporal coordinate t. Consequently component Ex (x, t) = Cte. Therefore, considering a constant component of the electric field for variable phenomena over time is of no use. For plane waves we therefore write: Ax (x, t) = 0; Ex (x, t) = 0 Now we need to specify the value of component Bx of the magnetic field. Given that    B = ∇ ∧ A , component Bx is written as follows: Bx = −

∂Az ( x, t ) ∂Ay ( x, t ) − =0 ∂y ∂z

So, for plane waves, we finally obtain: Ax (x, t) = 0; Ex (x, t) = 0; Bx (x, t) = 0

[1.174]

Results [1.174] express that the respective components Ax, Ex and Bx of the vector potential, electric and magnetic field of the plane wave are zero at all points in space    and time. Consequently, vectors A , E and B are perpendicular to the propagation direction Ox. For this reason, the vector potential and the electric and magnetic fields of the plane wave are said to be transverse. 1.1.4.10. Monochromatic progressive plane waves

By definition, a progressive plane wave, is a plane wave such that one of its scalar functions f (ct – x) and g (ct + x) of solution [1.169] is always zero. Let’s put arbitrarily χ (ct + x) = φ (ct + x) = 0 in [1.171]. The components of the vector potential of the plane progressive are written as follows: Ay (x, t) = κ (ct – x); Az (x, t) = ψ (ct – x)

[1.175a]

Maxwell’s Equations

75

Also, the components of the electric and magnetic fields are associated with the vector potential components of the plane wave by the equations: Ey = −

∂V ∂Ay ( x, t ) ∂V ∂Az ( x, t ) − − ; Ez = − ∂y ∂t ∂z ∂t

[1.175b]

By = −

∂Ay ( x, t ) ∂Ax ( x, t ) ∂Ax ( x, t ) ∂Az ( x, t ) − − ; Bz = − ∂z ∂x ∂x ∂y

[1.175c]

Since ∂V/∂t = 0, considering [1.175a] we obtain: Ey = − cκ‘(ct – x); Ez = − cψ‘ (ct – x)

[1.175d]

By = ψ‘(ct – x); Bz = − κ‘(ct – x)

[1.175e]

In summary, for the progressive electromagnetic plane wave, the expressions of the components of the vector potential and the electric and magnetic fields are written according to equations [1.175]: Ay (x, t) = κ (ct – x); Ey = − cκ‘(ct – x); By = ψ‘(ct – x)

[1.176]

Az (x, t) = ψ (ct – x); Ez = − cψ‘(ct – x); Bz = − κ‘(ct – x) In equations [1.176], the general functions f’ represent the derivative of the scalar function f with respect to time; that is to say: f’ = ∂f/∂t. Equations [1.176] establish two important properties of the electric and magnetic fields of progressive electromagnetic plane waves.

  The 1st property expresses the scalar product E ⋅ B . We get the following considering equations [1.174] and [1176]:   E ⋅ B = E y B y + E z Bz = − cκ 'ψ '+ cψ ' κ ' = 0   Fields E and B of the progressive plane wave are therefore perpendicular.

  The 2nd property expresses the modulus of fields E and B . Considering equations [1.174] and [1.176] we obtain: E2 = Ey 2 + Ez2 = c2κ‘2 + c2ψ‘2 = c2 (κ‘2 + ψ‘2)

76

Electromagnetic Waves 1

B2 = (κ‘2 + ψ‘2)  E2 = c2B2

  The ratio of the modulus of fields E and B of progressive plane waves is constant and equal to the propagation velocity of electromagnetic waves in a vacuum. So: B = E/c.    Considering Figure 1.24, we see that e x , E and B form a direct trihedron. So:   e x  B= ∧E c

[1.177]

Electromagnetic waves are generally polychromatic waves. This is the case of light waves radiated by the sun. In some cases, the light wave consists of a single radiation wavelength λ. Such a wave is deemed monochromatic. By definition, a progressive plane wave is monochromatic, if the components of the vector potential are in the form:   2π c  x    Ay ( x, t ) = A0 y cos   t − c  + φ0 y  λ        A ( x, t ) = A cos  2π c  t − x  + φ  0z    0z   z  λ  c  

[1.178]



E



O

→ ex

x

B

Figure 1.24. Electric and magnetic fields perpendicular and orthogonal to the propagation direction of the progressive plane wave

In [1.178], the constants A0y and A0z represent respectively the amplitudes of waves functions Ay (x, t) and Az (x, t) and constants ϕ0y and ϕ0z are their respective phases.

Maxwell’s Equations

77

These amplitudes and phases are the physical variables that characterize the polarization of progressive monochromatic plane waves: – the polarization is said to be rectilinear if ϕ0y = ϕ0z: in this case, wave functions Ay (x, t) and Az (x, t) are “in phase”; – the polarization is said to be elliptical if A0y ≠ A0z and if the difference in phase defined by ϕ = ϕ0z − ϕ0y is equal to 0 or π. Right or left elliptical polarizations follow the direction of the rotation of the electric field on the ellipse; – the polarization is said to be circular if A0y = A0z and if ϕ = ϕ0z − ϕ0y = ± π/2. The polarization is right circular if ϕ = + π/2: the rotation of the electric field on the circle is clockwise (opposite to the trigonometric direction); it is left circular if ϕ = − π/2: the rotation of the electric field on the circle is in the trigonometric direction. Now we will express the components of the electric and magnetic fields of monochromatic progressive plane waves. Using [1.75b] as well as components [1.78] of the vector potential, we obtain: ∂Ay ( x, t ) 2π c   2π c  x   A0 y sin  t −  + φ0 y  = Ey = −  ∂t λ   λ  c    E = − ∂Az ( x, t ) = 2π c A sin  2π c  t − x  + φ  0z    0z   z ∂t λ  λ  c  

[1.179a]

  2π c  x   ∂Az ( x, t ) 2π =− A0 z sin  t −  + φ0 z   By = −  ∂x λ   λ  c   ∂ ( , ) A x t   2π 2π c  x  B = y = A0 y sin   t −  + φ0 y   z ∂ λ x  λ  c  

[1.179b]

Let us consider the particular case where ϕ0y = ϕ0z = 0. Under these conditions,    the vector expressions of the vector potential A and fields E and B are written as:   2π c  x   2π c  x   t −  e x + A0 z cos t− ez  A( x, t ) = A0 y cos  λ  c λ  c          A( x, t ) = A0 cos 2π c  t − x  ; A0 = A e x + A e z y z 0 0    λ  c

[1.180a]

78

Electromagnetic Waves 1

  2π c 2π c  x   2π c 2π c  x A0 y sin t −  ey + A0 z sin t −  ez  E ( x, t ) =   λ λ  c λ λ  c    2π c  x  [1.180b] t−   E ( x, t ) = E 0 sin  λ  c      2π c 2π c  A0 y e x + A0 z e z = A0 E0 = λ λ 

(

)

  2π 2π c  x  2π 2π c  x   A0 z sin t − ey + A0 y sin t− ez  B ( x, t ) = −  λ λ  c λ λ  c      2π c  x [1.180c]  B ( x, t ) = B 0 sin t − c  λ         2π 2π  e x ∧ A0 − A0 z e y + A0 y e z =  B0 = λ λ 

(

)

  Fields E and B of monochromatic progressive plane waves verify the properties of progressive plane waves, which are listed below:   – E and B are perpendicular at all points in space and time;   – the equation linking the modulus of fields E and B is c: B = E/c;    – the vectors e x , E and B form a direct trihedron and verify equation [1.177].   In addition to the properties of progressive plane waves, fields E and B are characterized by special properties when the progressive plane wave is monochromatic. Using [1.180], we see that for a monochromatic progressive plane wave:   – the vector potential A has a constant direction equal to that of A0 ;  – the field E has a constant direction which is that of its amplitude:   E 0 = (2π c / λ ) A0  – the field B has a constant direction which is that of its amplitude:    B 0 = (2π / λ )2 e x ∧ A0   – the field E is collinear to the vector potential A at all points in space and time.

Maxwell’s Equations

79

1.1.4.11. Maxwell’s equations in a perfect metal

Metals are characterized by their specific properties to conduct electric current.  When a metal is subjected to an electric field E , electrons mobilize with a velocity  v . If µ is the mobility of electrons and ρm is the charge volume density of mobile   electrons, the velocity v and the current density vector J are written as follows:       v = µE ; J = ρ m v = ρm µE = σ E

[1.181]

By definition, the physical variable σ = ρmµ is known as the metal conductivity. A metal is said to be perfect if its conductibility is infinite. Since the charge volume density and the electron conduction velocity are finite, then for a perfect metal, the electric field is uniformly zero. According to the Maxwell-Gauss equation:   ρ ∇ ⋅ E = m = 0  ρm = 0

ε0

In conclusion, in a perfect metal, the charge volume density ρm is uniformly zero. In addition, Maxwell’s equations in a vacuum are valid in a perfect metal. Using the Maxwell-Faraday equation, it becomes:      ∂B  ∇∧E = − = 0  B = Cte ∂t

The result above shows that the magnetic field can only be constant in a perfect metal. However, for time-dependent phenomena, considering a uniform magnetic field is of no use. So, in a perfect metal, the magnetic field is also uniformly zero.     Since B = ∇ ∧ A , the vector potential A is also uniformly zero in a perfect metal. Finally, using the Maxwell-Ampère equation, we find that the current density vector is also uniformly zero in a perfect metal:    B    ∂ E     , B =0, E =0 J =0 ∇∧ = J + ε0 ∂t μ0

So, in summary, in a perfect metal:         E = 0 ; B = 0 ; A = 0 ; ρ = 0; J = 0

[1.182]

80

Electromagnetic Waves 1

1.1.4.12. Reflection of the electromagnetic field on the surface of a perfect metal

Here we consider a monochromatic electromagnetic progressive plane wave propagating in a vacuum. Ox is the unit vector propagation axis e x , ω is the  ω pulsation and k = e x is the wave vector of the progressive plane wave. c During propagation, the wave meets the flat surface of a perfect metal arranged vertically as shown in Figure 1.25. In what follows, we focus on the reflection process of the plane wave on the metal occupying the half-space x ≥ 0 (the thickness of the metal does not come into play in this study of the reflection process; therefore it can be disregarded). The electromagnetic field close to the metal surface is the superposition of an   incident wave and a reflected wave. Here E i and E r are components of the electric field of the incident wave and the reflected wave respectively. Under the principle of superposition, the resulting electric field is equal to:    E = Ei + E r   Bi and B r are the components of the magnetic field of the incident wave and reflected wave, respectively:    B = Bi + B r

Let us assume that the monochromatic progressive plane wave is rectilinearly polarized according to axis Oz. →

Ei

z

y →

ex

x

O metal surface

Figure 1.25. Perfect metal arranged vertically on the propagation axis of a monochromatic progressive plane wave

Maxwell’s Equations

81

   Let us consider s (x, t) as one of the components of vectors A , E or B . In

complex notation, the incident si* ( x, t ) and reflected sr* ( x, t ) plane waves are written:  si* ( x, t ) = s0i ei ( ki x − ωt )  * i ( k x − ωt )  sr ( x, t ) = s0 r e r

[1.183]

In equations [1.183] we write ωi = ωr = ω. Indeed, the incident wave and the reflected wave both propagate in a vacuum. They therefore have the same pulsation equal to ω. Before reflection, the electric field of the rectilinearly polarized plane wave  according to Oz is combined with its component E i (Figure 1.25). For example:

Eix = 0 ; Eiy = 0 ; Eiz = E0i ei ( ki x − ωt ) ; ki = k =

ω c

[1.184]

 After reflection, the components of the electric field E r are written according to the general equations [1.183]:

Erx = 0 ; Ery = 0 ; Erz = E0r ei (kr x −ωt )

[1.185]

Next, we apply the continuity conditions imposed on all wave functions in contact with a surface of separation to explain the expressions of components Erx, Ery, Erz of the electric field and component kr of the wave vector of the reflected wave. Knowing that in a perfect metal, the electric field Em is uniformly zero [1.182], the continuity of the electric field at point O implies that: E = Ei + Er = Em. Therefore: Eix + Erx = Emx = 0  Eix = − Erx = 0 Eiy + Ery = Emy = 0  Eiy = − Ery = 0 Eiz + Erz = Emz = 0  Eiz = − Erz  E0i ei ( ki x − ωt ) = − E0 r ei ( kr x − ωt )

82

Electromagnetic Waves 1

Choosing the initial conditions so that the amplitude s0 of the plane wave [1.183] is real, we obtain whilst considering the latter of the equalities above since s0 is positive: (Eiz)2 = (Erz)2  |E0i|2 = |E0r|2 = |E0|2  E0i = E0r = E0

[1.186]

Moreover, the last of the above equations is true regardless of the time t and especially for t = 0. Since E0i = E0r = E0: E0i eiki x = − E0 r eikr x  cos ki x + i sin ki x = − cos kr x − i sin kr x

The last of the above equations is verified if cos (kix) = − cos (krx) and sin (kix) = − sin (kix). With the functions cosine and sine being even and odd, respectively, the equation between the wave numbers ki and kr can be determined using the equation sin (kix) = − sin (krx) = sin (− krx). Whereby, kix = − krx. Here, the norm of the wave vector of the reflected wave is such that: ki = − kr =

ω c

 kr = − k = −

ω

[1.187]

c

The components of the reflected electric field [1.185] are written as follows:

Erx = 0 ; Ery = 0 ; Erz = − E0 ei ( − kx − ωt ) ; k =

ω c

[1.188]

In summary, the incident and reflected electric fields are written:    i ( kx −ω t ) ex  E i = E0 e    i ( − kx − ωt ) ex  E r = − E0 e  ω k = c 

[1.189]

 Expression [1.189] shows that the reflected electric field E r corresponds to a monochromatic progressive plane wave propagating in the negative sense.

What is left to study is the behavior of the magnetic field in contact with the monochromatic plane wave and the perfect metal. For this, we use result [1.177]

Maxwell’s Equations

83

and then express the equations between the incident, electric and magnetic fields and between the reflected electric and magnetic fields as follows:    e x   e x  Bi = ∧ Ei ; Br = ∧ Er c c

[1.190]

  Considering [1.189], the components Bi and B r are written as follows:

E0 i ( kx −ωt )   Bix = 0 ; Biz = 0 ; Biy = c e   B = 0 ; B = 0 ; B = − E0 ei ( − kx − ωt ) rz ry  rx c

[1.191]

In the vector form, the incident and reflected magnetic fields are written as:     B i = B0 ei ( kx − ωt ) e y    i ( − kx − ωt ) ey  B r = − B0 e  E ω  B0 = 0 ; k =  c c

[1.192]

1.1.4.13. Superposition of incident and reflected waves: stationary wave       Let us express the fields E = E i + E r and B = Bi + B r using [1.189] and

[1.192]. We obtain:

 Ex = E y = 0 ; Ez = E0 ei ( kx −ωt ) − E0 ei ( − kx −ωt ) = E0 e− iωt (eikx − e− ikx )  i ( kx − ωt ) − B0 ei ( − kx −ωt ) = − B0 e− iωt (eikx + e− ikx )  Bx = Bz = 0 ; By = − B0 e Using trigonometric functions, we obtain: E z = E0 e −iωt [cos kx + i sin kx − (cos kx − i sin kx)] = 2iE0 e−iωt sin kx B y = − B0 e −iωt [cos kx + i sin kx + (cos kx − i sin kx)] = −2 B0 e−iωt cos kx

84

Electromagnetic Waves 1

So: E z = 2iE0 (cos ωt − i sin ωt ) sin kx = 2iE0 cos ωt sin kx + 2 E0 sin ωt sin kx B y = −2 B0 (cos ωt − i sin ωt ) cos kx = −2 B0 cos ωt cos kx + 2iB0 sin ωt cos kx

In real notation, the expression of the plane wave s (x, t) is equal to the real part of the wave function s* (x, t) [1.183] in complex notation. So s = ℜ(s*) where ℜ is the real part of the complex wave s*. Using real notation, which is more suitable for the discussions that follow, we obtain:

Ez = 2 E0 sin ωt sin kx  B y = −2 B0 cos ωt cos kx  B0 = E0 / c ; k = ω / c

[1.193]

By definition, the stationary wave is any wave resulting from the superposition of two waves of the same pulsation and amplitude, but which propagate in opposite directions. The wave numbers have the same value equal to k for both waves but with opposite signs. Such a wave does not propagate, instead it produces an oscillation in place, hence the term “stationary”. Mathematically, a stationary wave with propagation direction Ou is the product of a function of space coordinates by a function of time with the form: s (u, t) = s0 cos ku cosωt or s (u, t) = s0 sin ku sinωt

[1.194]

Components Ez and By [1.193] of the electric field and magnetic field respectively are characterized by a stationary wave. It is no longer progressive since there is no propagation. As with all stationary waves, the vibration of fields Ez and By is characterized by the existence of nodes and anti-nodes. By definition: – the nodes are the vibration minima of the stationary wave at points u fixed in space; – the anti-nodes are the vibration maxima of the stationary wave at points u fixed in space. Moreover, there are nodal planes for which the stationary wave is zero at all instants. Let us specify these planes for the total electric and magnetic fields [1.194] of the stationary electromagnetic wave.

Maxwell’s Equations

85

The amplitudes of the electric and magnetic fields depend on variable x. – For the electric field, the nodal planes are situated at points x such that: sin kx = 0  kxn = nπ ; k =

ω c

=



λ

 xn =

nλ ; n is an integer 2

– For the magnetic field, the nodal planes are situated at points x such that: cos kx = 0  kx p =

(2 p + 1)π 2π pλ λ  xp = + ; p is an integer ;k = λ 2 2 4

The nodal planes of the magnetic field are offset by λ/4 with respect to the nodal planes of the electric field. With the metal plane situated at x = 0 (Figure 1.26), the metal surface is a nodal plane for the electric field. A node corresponds to point O for the electric field and an antinode for the magnetic field, as indicated in Figure 1.26, illustrating the structure of the electromagnetic stationary wave.

z



E

z

y

y →

B

O

x

Figure 1.26. Structure of an electromagnetic stationary wave

1.2. Maxwell equations in material media4

We previously studied electromagnetics in a vacuum made up of the basic disciplines of electrostatics, magnetostatics and electromagnetic induction. Then, we deduced from this study, the fundamental equations of electromagnetism comprising Maxwell’s equations in a vacuum of charges and currents.

4 (Annequin and Boutigny 1974; Bok and Hulin-Jung 1979; Faroux and Renault 1998; Mauras 1999; Stöcker et al. 2007).

86

Electromagnetic Waves 1

The objective of this section is to study electromagnetism in material media with the aim to establish Maxwell’s equations in these media. On a microscopic scale, matter is made up of atoms that can unite to form molecules. Each atom consists of a nucleus and an electron cloud. The charged particles of the matter consist of electrons and protons interacting strongly with electric fields. In addition, these particles are in motion and are characterized by their magnetic spin and orbital moments. Matter is thus the site of polarization and magnetization phenomena.

 In this section, we will therefore introduce the notions of polarization vector P  and magnetization vector M . To establish Maxwell’s equations in a material  medium, two new vector fields will be introduced: the electric induction vector D  (or even the electric displacement vector) and the magnetic excitation vector H . Maxwell’s equations in a material medium therefore involve four vector fields: the     electric field E , the magnetic field B and the fields D and H . We will limit our study to linear, homogeneous and isotropic dielectric media. 1.2.1. Electric field and potential in macroscopic dielectric media 1.2.1.1. Dielectric medium, polarization vector

We clarified in the introduction that charged particles of matter are characterized by their magnetic spin and orbital moments. The action of an external electric field directs the elementary electric dipoles in well-defined directions. For an electric   dipole with a dipole moment p placed in an electric field E , the interaction energy potential between the dipole and electric field is defined by the following equation:   W = −p⋅E

[1.195]

For example, regarding polar molecules, the most likely arrangement of the dipole moments of the most stable molecules corresponds to the attraction of the dipoles, which decreases the potential energy [1.195]. The dipole moments are then oriented parallel and antiparallel to the electric field (Figure 1.27). On a macroscopic scale, the permanent polarization of matter or that induced by the action of an  external electric field, causes the creation of a polarization vector P . In a space domain with volume dτ of polarized matter, the elementary electric dipole moment  d M is defined by the equation:   dM = P dτ

[1.196]

Maxwell’s Equations

87

Figure 1.27. Most likely arrangement of dipole moments of the most stable polar molecules

The polarization vector can be both uniform and not in volume dτ and can depend on time. In what follows, we will assume it is independent of time. 1.2.1.2. Scalar potential in a polarized environment, polarization charges → er

(τ )

dτ N N’ P

→ →

n

M r

ρ



P

(S)

dS

Figure 1.28. Dielectric medium with volume τ

Let us consider a dielectric medium occupying a certain space domain with volume τ (Figure 1.28). This domain is the site of permanent polarization or is induced and characterized by a free-charge volume distribution. At point N in this  domain, the polarization vector is P and the free-charge (ρ) volume density is denoted ρfree. The electric potentials dVρ and dVp respectively created in M by the charge volume distribution and by the volume distribution of electric dipoles characterized  by the polarization vector P are deduced from the electric scalar potential [1.70a] and the electric dipole potential [1.80] respectively: dVρ =

dq 4πε 0 r

=

ρ free dτ 4πε 0 r

; dV p =

  dM ⋅ e r 4πε 0 r 2

=

  P ⋅ e r dτ 4πε 0 r 2

[1.197]

88

Electromagnetic Waves 1

The overall scalar potential at point M is therefore given by the superposition principle, i.e. dV = dVρ and dVp. For all free charges and electric dipoles distributed in volume τ, we obtain: V =  (τ )

ρ free dτ 4πε 0 r

+  (τ )

  P ⋅ e r dτ 4πε 0 r 2

[1.198]

Besides, due to the polarization, charges distributed in the volume (τ) and others distributed on the surface (S) of the domain considered appear in the medium (Figure 1.28). These charges are called polarization charges and are responsible for the scalar potential dVρ created by the polarization of the medium. We seek to explain this in what follows. Note first of all that the overall potential [1.198] contains a first term in 1/r and a second term in 1/r2. To introduce the polarization charges, the second term is transformed so as to obtain a potential in 1/r. For this, we consider the gradient of the scalar function f (r):  ∂f  1 ∂f  1 ∂f  er + eθ + eϕ ∇f = r ∂θ r sin θ ∂ϕ ∂r

For the radial function f (r) = 1/r, we get:    1  d  1   er ∇   =   er =  r  dr  r  r2

[1.199a]

Now we make use of the following vector transformation equations:     1  er      1    P  1      1  ∇   = ∇ ⋅ P + P ⋅∇   ; ∇ ⋅   = ∇ ⋅ P + P ⋅ ∇   r  r  r2 r r r

[1.199b]

Using [1.199a], the final equality [1.199b] gives:             P  ∇ ⋅ P P ⋅ er P ⋅ er   P  ∇ ⋅ P  = ∇ ⋅   − ∇ ⋅   = + r r r2 r2 r r

[1.199c]

Maxwell’s Equations

89

Inserting the second equality [1.199c] into [1.198], we find: V =  (τ )

ρ free dτ 4πε 0 r

+  (τ )

   1   P  1 ∇⋅P ∇ ⋅   dτ −  (τ ) dτ 4πε 0 4πε 0 r r

[1.199d]

The last term to the left of the expression [1.199d] is analogous to the expression of the scalar potential created by a charge volume distribution characterized by the     charge volume density ∇ ⋅ P . So, ρ pol = − ∇ ⋅ P . The expression [1.199d] is written as follows:  ρ pol dτ 1   P  +  (τ ) ∇ ⋅   dτ +  (τ ) V =  (τ ) dτ 4πε 0 r 4πε 0 4πε 0 r r

ρ free dτ

[1.199e]

Now we will transform the second term in the right-hand side of the expression [1.199e]. Let N’ be a point on the closed surface (S) surrounding the volume domain (τ)   (Figure 1.28). The polarization vector at N’ is written P ' = P ( N ) . Using the divergence theorem we obtain:

   P  ∇ ⋅   dτ = (τ ) r



  P '⋅ dS = (S ) r



  P '⋅ n dS = (S ) r





σ pol dS

(S )

r

[1.199f]

In equation [1.199f], the surface charge density of the polarization charges     distributed over surface (S) is σ pol = P '⋅ n = P ( N ') ⋅ n . Using the last term to the left of the expression [1.199f], the overall potential [1.199e] at point M created by all the free charges and electric dipoles distributed in volume (τ) is written as follows: V=

ρ pol dτ

σ pol dS

ρ pol dτ

(τ ) 4πε 0 r + (τ ) 4πε 0 r + (τ ) 4πε 0 r dτ

[1.200]

By definition, the polarization charges are: – the charges due to the polarization of the medium and distributed over the surface (S). They are characterized by the surface charge density

 





σ pol = P '⋅ n = P( N ') ⋅ n ;

90

Electromagnetic Waves 1

– the charges due to the polarization of the medium and distributed in the volume (τ).

 

 

They are characterized by the volume charge density ρ pol = −∇⋅ P = −∇⋅ P( N ) ; – the polarization charges are associated with a polarization density vector   ∂P denoted J pol = . ∂t Thus, when the medium has a permanent polarization or is induced by an external electric field, the surface and volume polarization charge densities as well as the polarization density vector are given by the respective equations:       ∂P σ pol = P ⋅ n ; ρ pol = − ∇ ⋅ P ; J pol = ∂t

[1.201a]

 The total volume density ρtot and the total current density vector J tot are given by the equations: 





ρtot = ρ free + ρ pol ; J tot = J free + J pol

[1.201b]

When the polarization disappears (σpol =ρpol = 0), only the free charges with charge volume density ρ remain in the medium. The corresponding potential is given by the first term in the general expression [1.200]. Moreover, in a steady state,    the polarization vector P is constant, whereby J pol = 0 . Also, the charge volume density of polarization and the volume density of the polarization current verify the local charge conservation equation [1.153]:   ∂ρ pol ∇ ⋅ J pol + =0 ∂t

[1.202]

1.2.1.3. Electric field and displacement

In a dielectric medium with a free charge ρfree volume density and polarization charge ρpol volume density, the local formulation of Gauss’s theorem [1.1.25] is written as follows:

  ρ free + ρ pol ∇⋅E =

ε0

[1.203]

Maxwell’s Equations

91

  Since ρ pol = − ∇ ⋅ P , equation [1.203] is written in the form:     ρ free − ∇ ⋅ P        ∇⋅E =  ε 0 ∇ ⋅ E + ∇ ⋅ P  = ∇ ⋅ ε 0 E + P  = ρ free ε

[1.204]

0

  The last equality is analogous to equation ∇ ⋅ P = − ρ pol . Hence, we define a  displacement electric vector D given by the equation:    D = ε0 E + P

[1.205]

According to [1.204]:   ∇ ⋅ D = ρ free

[1.206]

 The electric displacement vector D is also known as the electric induction vector or even the electric excitation vector. In a vacuum of free charges (ρfree = 0), the divergence of the displacement vector is zero according to [1.206]: its flux is conservative in virtue of the divergence theorem.

1.2.1.4. Electric field and electric displacement vector continuity equations across the vacuum-dielectric surface of separation

Here we study the refraction of the electric field and the electric displacement vector across a vacuum-dielectric surface of separation (Figure 1.29).

Figure 1.29. Refraction of the electric displacement vector across a vacuum-dielectric surface of separation

92

Electromagnetic Waves 1

The electric field and the displacement vector in a vacuum and in the dielectric     are respectively: E v and D v and E d and D d . So, according to [1.205]:   Dv = ε 0 E v

   ; Dd = ε 0 E d + P

[1.207]

 In the vacuum, the displacement vector E v is proportional to the electric field    E v [1.207]. Since ε0 < 1, then the vectors E v and D v have the same sense and  direction (Figure 1.29). However, in the dielectric, the field E d and the  displacement vector D d do not have the same direction due to the polarization  vector P .

Let us choose a small cylinder with a base surface area dS and infinitesimal height h (Figure 1.29). We express the total flux of the displacement vector leaving the cylinder as equal to the sum of the fluxes leaving the circular dS and central base surface area Mv and Md and the flux leaving the lateral surface area of the cylinder. We obtain: Φ tot =



(S )

  D d ⋅ dS +



(S )

  D v ⋅ dS + Φ sl = −



(S )

  D d ⋅ n dS +



(S )

  D v ⋅ n dS + Φ sl

The divergence of the electric displacement vector is zero in vacuum, so, using the divergence theorem, the conservation of flux is written as follows:

 τ

( )

  (∇ ⋅ D v ) d τ = −



(S )

  D d ⋅ n dS +



(S )

  D v ⋅ n dS + Φ sl = 0

That is to say:     D v ⋅ n dS − D d ⋅ n dS + d Φ sl = 0

[1.208]

When points Mv and Md tend towards M, the lateral surface tends towards zero (h → 0) such that dΦ → 0. At the limit of point M, equation [1.208] gives the following equality:     D v ⋅ n dS = D d ⋅ n dS  Dvn = Ddn

[1.209]

Maxwell’s Equations

93

Result [1.209] expresses the continuity of the normal component of the electric displacement vector across a vacuum-dielectric surface of separation. What is it for the electric field? Using [1.207], we deduce from the first equality [1.209]:      (ε 0 E v ) ⋅ n dS = (ε 0 E d + P ) ⋅ n dS

That is to say:









 

ε 0 E v ⋅ n dS − ε 0 E d ⋅ n dS = P ⋅ n dS

[1.210]

  According to equation [1.201], the surface density of polarization σ pol = P ⋅ n .

Whereby, according to [1.199]: 







ε 0 E v ⋅ n dS − ε 0 E d ⋅ n dS = σ pol dS  Evn − Edn =

σ pol ε0

[1.211]

The last equality [1.211] expresses that the normal component of the electric field has a discontinuity σpol/ε0 across a vacuum-dielectric surface of separation. Now we need to study the behavior of the tangent components of the electric field and electric displacement vectors across the vacuum-dielectric surface of separation. Let us consider a rectangular circuit (C) ABDF overlapping the surface of separation and whose lengths AF and BD are infinitesimal (Figure 1.30). We express the circulation of the electric field along the ABDF circuit using Stokes’ theorem. As we only consider fields independent of time in dielectric media, the MaxwellFaraday equation gives:    ∂B  ∇∧E = − =0 ∂t

With dC being the sum of circulations of the electric field along lengths BD and FA, we obtain: 











(S ) (∇ ∧ E v ) ⋅ dS = (C ) ( E v + E d ) ⋅ dl '+ dC = 0 That is to say:

( AB)

  E v ⋅ dl −

( DF )

  E d ⋅ dl + dC = 0

94

Electromagnetic Waves 1

Whereby:

       ( E v − E d ) ⋅ dl + dC = 0  E v ⋅ dl − E d ⋅ dl + dC = 0

[1.212]

Figure 1.30. Circulation of the electric field along an ABDF circuit overlapping a vacuum-dielectric surface of separation

When Mv and Md tend towards M, the lengths BD and FA tend towards zero such that dC → 0. At point M, equation [1.211] gives the equality:

    E v ⋅ dl − E d ⋅ dl = 0  EvT = EdT

[1.213]

Result [1.213] expresses the continuity of the tangent component of the electric field across a vacuum-dielectric surface of separation. What is it for the displacement vector? Using [1.206], we deduce the following equation from [1.213]: 1   1     D v ⋅ dl − ( D d ⋅ dl − P ⋅ dl ) = 0

ε0

ε0

That is to say:       D v ⋅ dl − D d ⋅ dl − σ p n ⋅ dl = 0

At point M situated at the vacuum-dielectric surface of separation:      dl = dAB = − dAB  dl ⋅ n = 0

[1.214]

Maxwell’s Equations

95

Equation [1.214] is written as follows:     D v ⋅ dl − D d ⋅ dl = 0  DvT = DdT

[1.215]

According to [1.215] the tangent component of the electric displacement vector is continuous across a vacuum-dielectric surface of separation. 1.2.2. Homogeneous linear dielectric media 1.2.2.1. Definition of a dielectric linear medium

The vacuum is characterized by its dielectric permittivity ε0. A dielectric is characterized by its absolute dielectric permittivity ε and its relative permittivity εr linked to the permittivity of the vacuum via equation (which we will present below): ε = ε0εr. For the vacuum: εr = 1. By definition, a dielectric medium is said to be homogeneous if its properties are the same at all points. In this case, the equations between the physical parameters (fields, vectors, charge density, etc.) of the medium are independent of space coordinates. The dielectric is said to be linear, if the application passing from the electric displacement vector to the electric field is linear, i.e.:

  D= ε E

[1.216]

In general, for a non-homogeneous dielectric, the absolute dielectric permittivity

ε depends on space coordinates x, y and z. It is a 3 × 3 matrix of matrix elements εij. Equation [1.216] is also a matrix structure written in the following form:  Dx   ε xx ε xy ε xz   E x       ( D) = (ε ) ( E )   D y  =  ε yx ε yy ε yz   E y        Dz   ε zx ε zy ε zz   E z 

[1.217]

In the case of a homogeneous linear dielectric, the permittivity ε is independent of space coordinates x, y and z, which gives D = ε E. 1.2.2.2. Matrix properties of dielectric permittivities, electric axes

The dielectric permittivity matrix has special properties. Two matrix elements symmetrical with respect to the main diagonal are equal:

εxy = εyx; εxz = εzx; εyz = εzy

[1.218]

96

Electromagnetic Waves 1

Therefore the dielectric permittivity matrix is said to be symmetrical. Moreover, the dielectric permittivity matrix is diagonalizable. There are three axes Mx1, Mx2 and Mx3 perpendicular to one another at point M such that the matrix equation [1.217] is written:  D1   ε1 0 0  E1        D2  =  0 ε 2 0  E2   D   0 0 ε  E  3  3   3 

[1.219]

By definition, the axes Mx1, Mx2 and Mx3 are called electric axes or principal axes. The parameters ε1, ε2 and ε3 are called principal dielectric permittivities of M. In addition, in the main axis system, the electric displacement vector is linked to the electric field by the second equation [1.207]. By omitting the index d set for dielectrics, we obtain:

   D = ε0 E + P

[1.220]

By projecting this equation on the main dielectric axes, considering the matrix relationship [1.219] we obtain:

 E1 = ε1 E1 = ε 0 E1 + P1  P1 = (ε1 − ε 0 ) E1   E = E = E + P  ε ε  2  P2 = (ε 2 − ε 0 ) E2 2 2 0 2 2 E = ε E = ε E + P  P = (ε − ε ) E 3 3 0 3 3 3 0 3  3  3

[1.221]

1.2.2.3. Electric field and displacement vectors in a linear homogeneous isotropic dielectric (LHI), dielectric susceptibility

We can distinguish between anisotropic dielectric media and isotropic dielectric media. By definition, a dielectric medium is said to be anisotropic if its properties at a given point depend on the direction considered in space. This is the case, for  example, of many crystals. In this case, the polarization vector P and the electric  field E are not colinear as the previous equalities indicate [1.221]. However, the dielectric medium is linear and isotropic if its properties about a point are the same in all directions and at all points in the medium. In other words, for a linear and isotropic dielectric medium, the principal dielectric permittivities are equal. Dielectric liquids and non-crystalline solids, such as glass, are isotropic media. For

Maxwell’s Equations

97

electric field low values, the polarization vector is proportional to the electric field and given by the equation:   P = ε 0 χe E

[1.222]

By definition, χe is known as the dielectric susceptibility. Physically, χe is a measure of the separation of electric charges in a dielectric medium subjected to an  external field E . Using equation [1.222], the electric displacement vector [1.220] is written as follows:    D = ε 0 (1 + χ e ) E = ε E

[1.223]

In a linear and isotropic dielectric medium, the absolute dielectric permittivity is given by the equation:

ε = ε 0 (1 + χ e ) = ε 0ε r ; ε r = (1 + χ e )

[1.224]

Generally speaking, χe is always greater than 1 (χe > 1). According to the first equality [1.224], this means that ε > ε0. Also, the last equality [1.224] shows that the relative permittivity εr is linked to the dielectric susceptibility χe. Therefore εr is also a measure of the degree of polarization of the dielectric medium. For vacuum, εr = 1  χe = 0. Table 1.6 gives several values of relative permittivity for various dielectric media at ambient temperature. Dielectric

εr

Dielectric

εr

Paper

2 – 2.8

Glass

7–8

Copper oleate Cu (C18H33O2)2

2.8

Alumina Al2O3

10.0

Acetamide C2H5NO

4.0

Copper sulfate CuSO4

10.3

Barium nitrate Ba(NO3)2

5.9

Barium sulfate BaSO4

11.4

Calcium carbonate CaCO3

6.08

Copper oxide (I) Cu2O

18.1

Ammonium chloride NH4Cl

7.0

Methanol CH4O

31.0

Calcium fluoride CaF2

7.36

Crystallized sodium chloride NaCl

59.0

Table 1.6. Relative permittivity of dielectric media at ambient temperature

98

Electromagnetic Waves 1

1.2.3. Magnetic media 1.2.3.1. Magnetic medium, magnetization vector

As we said in the introduction, charged particles in material media are in motion and are characterized by their magnetic spin and orbital moments. The action of an external magnetic field orientates elementary magnetic moments in well-defined directions. At the macroscopic scale, permanent magnetization of the material or induced by the action of an external magnetic field, causes the creation of a  magnetization vector denoted M . In a domain space with volume dτ of a magnetic  material, the elementary magnetic moment d M is defined by equation:

  dM = M dτ

[1.225]

The magnetization vector can be both uniform and not, in the elementary volume dτ. It can also be static or vary with time. 1.2.3.2. Vector potential in a magnetic medium, magnetization current densities

Let us consider a magnetic medium occupying a certain space domain with volume τ (Figure 1.31). This domain is the site of a permanent or induced magnetization and is characterized by a distribution of currents due to conduction  charge carriers. At point N in this domain, the magnetization vector is denoted M   and the current density conduction vector is J free . The vector potentials dAc and   dAa respectively created at point Q by the conduction current distribution J free and by the magnetization of the medium characterized by the magnetization vector  J are respectively deduced from the vector potential [1.70b] and the magnetic dipole potential [1.81] established above, i.e.:       μ J free dτ  μ dM ∧ er μ0 M ∧ er dAc = 0 dτ ; dAa = 0 = 4π r 4π 4π r 2 r2

[1.226]

The overall vector potential created in Q by the conduction current distribution and by the magnetization of the medium is given by the superposition principle, i.e.:    dA = dAc + dAa . For all conduction currents and magnetic moments distributed in volume τ, we obtain:     μ0 J free dτ μ0 M ∧ e r A =  (τ ) dτ +  (τ ) 4π r 4π r 2

[1.227]

Maxwell’s Equations

99

Figure 1.31. Magnetic medium with volume τ

Furthermore, due to the magnetization, it appears in volume currents distributed in volume (τ) and magnetization currents distributed on the surface (S) of the domain considered (Figure 1.31). These currents are known as magnetization  currents and give rise to the vector potential dAa created by the magnetization of the medium. We will attempt to expand on this. As we can see, the overall vector potential [1.227] is the sum of a term in 1/r and another in 1/r2. To introduce the magnetization currents, let us transform the second term of the potential [1.227] to obtain an overall vector potential in 1/r. Note equation [1.199a]:    1  d  1   er ∇   =   er =  r  dr  r  r2

Now, let us take advantage of the vector transformation equation:    M  1     1   ∇ ∧   = ∇ ∧ M + ∇   ∧ M r  r  r

Using [1.199a], the last equality [1.228a] gives:            M  ∇ ∧ M er ∧ M ∇ ∧ M M ∧ er ∇ ∧   = + = − r r r2 r2  r 

[1.228a]

100

Electromagnetic Waves 1

So:   M ∧ er

r2

   ∇ ∧ M   M  = − ∇ ∧   r  r 

[1.228b]

If we add the last equality [1.228b] into [1.227], we obtain:      μ0 J free dτ μ0 ∇ ∧ M μ0   M  A =  (τ ) +  (τ ) dτ −  (τ ) ∇ ∧   dτ r 4π r 4π 4π  r 

[1.229a]

The first two terms of the right-hand side of [1.229a] are analogous to the    condition J vmag = ∇ ∧ M . This allows the introduction of the magnetization volume  current density vector J vmag . Equation [1.229a] is written as follows:     μ0 J free dτ μ0 J vmag dτ μ0   M  +  (τ ) −  (τ ) ∇ ∧   dτ A =  (τ ) r 4π r 4π 4π  r 

[1.229b]

Now we need to transform the third term of the right-hand part of expression [1.229b] to take account of the magnetization currents distributed on the surface. In order to apply the divergence theorem involving the divergence operator, it is first necessary to transform the third term to the right side of expression [1.229b]. To do this, let us take advantage of the following vector analysis property:          ∇ ⋅ ( f ∧ g ) = g ⋅∇ ∧ f − f ⋅ ∇ ∧ g   M Substituting f for we obtain: r     M      M ∇ ⋅  ∧ g  = g ⋅  ∇ ∧ r  r  

  M   ⋅∇ ∧ g  −  r

[1.229c]

  This equality is true whatever the value of g and, in particular if g is constant.    In this case, ∇ ∧ g = 0 . Equation [1.229c] is then reduced to:     M      M ∇ ⋅  ∧ g  = g ⋅  ∇ ∧ r  r  

  

[1.229d]

Maxwell’s Equations

101

We introduce the term to the left of equation [1.229d] into the last term to the  right of expression [1.229b]. Since g is constant, we get:  g⋅

 µ0   M  ∇ ∧   dτ = (τ ) 4π  r 



 µ0    M  g ⋅ ∇ ∧   dτ (τ ) 4π  r 



So, considering equality [1.229d], we obtain:  g⋅

 µ0   M  ∇ ∧   dτ = (τ ) 4π  r 



 µ0   M   ∇ ⋅  ∧ g  dτ (τ ) 4π  r 



[1.229e]

We can now apply the divergence theorem. For this we consider a point N’ on the closed surface (S) surrounding the domain of volume (τ) (Figure 1.32, section   1.2.3.3). Here, j smag = j smag ( N ' ) is the surface current density vector due to magnetization of the medium. According to the divergence theorem, the term to the right of equation [1.229e] is written as follows:

µ0 4π

   M   µ ∇ ⋅  ∧ g  dτ = 0 (τ ) r π 4  



  M     ∧ g  ⋅ dS (S )  r  



That is to say:

µ0 4π

   M   µ ∇ ⋅  ∧ g  dτ = 0 (τ ) 4π  r 



   M   n ⋅  ∧ g  dS (S )  r 



[1.229f]

So:

         f ⋅ ( h ∧ k ) = h ⋅ ( k ∧ f ) = k ⋅ ( f ∧ h) Considering this equation, we obtain:     M      M  n ⋅  ∧ g  = g ⋅  n ∧  . r   r  

[1.229g]

102

Electromagnetic Waves 1

Equation [1.229f] is therefore transformed as follows:    M   µ ∇ ⋅  ∧ g  dτ = 0 (τ ) 4π  r 

µ0 4π

    M  g ⋅  n ∧  dS (S ) r  





[1.229h]

Using equality [1.229d], equation [1.229h] gives:

 g⋅

 µ0   M  µ ∇ ∧   dτ = 0 (τ ) 4π r π 4  



  µ0   M  ∇ ∧   dτ = g ⋅ (τ ) 4π  r 

µ0 ( S ) 4π



    M  g ⋅  n ∧  dS (S ) r  

Whereby:

 g⋅





  M   n ∧  dS r  

So, after simplification:  µ0   M  ∇ ∧   dτ = (τ ) 4π  r 



µ0 ( S ) 4π



  n∧M  µ0   dS = − ( S ) 4π  r 



  M ∧n   dS  r 

Taking this result into account, expression [1.229b] of the vector potential is written as follows:    μ0 J free dτ μ J vmag μ A =  (τ ) +  (τ ) 0 dτ +  ( S ) 0 4π r 4π r 4π

   M ∧n   dS  r 

[1.229i]

   Now let us introduce the surface current density vector j smag = M ∧ n. The

overall vector potential is written:

    μ0 J free dτ μ0 J vmag dτ μ0 J smag dS +  (τ ) +  ( S ) A =  (τ ) 4π r 4π 4π r r

[1.230]

Vector potential [1.230] is therefore created by:

 – the conduction currents characterized by the current density vector: J free ; – the surface currents due to magnetization and characterized by the surface    magnetization current density vector: J smag = M ∧ n ;

Maxwell’s Equations

103

– the volume currents due to magnetization and characterized by the volume    magnetization current density vector: J vmag = ∇ ∧ M . Thus, when the material medium considered has a permanent magnetization or is induced by an external magnetic field, the surface and volume magnetization current density vectors are given by the respective equations:

      J smag = M ∧ n ; J vmag = ∇ ∧ M

[1.231]

   When the magnetization disappears ( J smag = J vmag = 0), only the current   density conduction charges remain in the medium J free = J . The corresponding potential is given by the first term of the general expression [1.230] as the Biot– Savart law expresses. 1.2.3.3. Magnetic excitation field and vector

To avoid any confusion, we will denote the current density conduction charges     as J free = J to distinguish between the surface J smag and volume J vmag magnetization current density vectors. Below is the Maxwell-Ampère equation deduced from Table 1.3:    B  ∂E ∇∧ = J free + ε 0 μ0 ∂t

As we are interested in the field that is independent of time, this equation is written as follows:   B  ∇∧ = J free

μ0

[1.232]

 Since the current density vector J free is linked to the volume mobile charge   density ( J free = ρ free v ), in a magnetized medium, we must consider the volume magnetization current density vector. Equation [1.232] is written as follows:   B   ∇∧ = J free + J vmag

μ0

[1.233]

104

Electromagnetic Waves 1

By substituting the volume magnetization current density vector in this equation by expression [1.231], we obtain:   B    ∇∧ = J free + ∇ ∧ M

μ0

That is to say:    B      B    ∇∧ − ∇ ∧ M = J free  ∇ ∧  − M  = J free μ0  μ0 

[1.234]

That last of equalities [1.234] is analogous to equation [1.232]. This allows the  introduction of a magnetic excitation vector H given by the equation:   B  H= −M

μ0

[1.235]

In steady state, the magnetic excitation vector satisfies the local law according to [1.234]:

   ∇ ∧ H = J free

[1.236]

   When the free charges are immobile, then J free = ρ free v = 0. Whereby,    ∇ ∧ H = 0 . The rotational of the excitation magnetic vector is non-zero if an

electric current with intensity I circulates in the circuit considered. In other words, the rotational of the magnetic excitation vector is linked to the current intensity I. To verify this, we will apply Stokes’ theorem. Let us consider a closed contour (C) orientated as indicated in Figure 1.32. Here (S) is a surface based on the contour considered. By applying Stokes’ theorem, the circulation of the magnetic excitation vector on a closed contour (C) is:

(CH) ⋅ dl = (S ) (∇ ∧ H ) ⋅ dS

[1.237]

Maxwell’s Equations

105

Using [1.236], equation [1.237] becomes:

(CH) ⋅ dl = (S ) J free ⋅ dS = I

[1.238] →

H →

(S)

dl



n

(C)



dS

Figure 1.32. Circulation of the excitation magnetic vector on a closed contour (C)

Result [1.238] states that the circulation of the magnetic excitation vector on a closed contour (C) is equal to the intensity I of the current crossing the contour. Not that I is, by definition, the flux of the current density vector across a surface dS based on (C). So, equation [1.238] allows us to define the units of the magnetic excitation vector. Assuming H is constant, for any contour Hl = I, the magnetic excitation is expressed in ampere per meter (A ⋅ m− 1) whereas the magnetic field is expressed in tesla (T). 1.2.3.4. Continuity equations of the magnetic excitation field and vector crossing a vacuum-magnetic medium surface of separation

Here we study the refraction of the magnetic field and the magnetic excitation   vector crossing a vacuum-magnetic medium surface of separation. B v and H v and   B a and H a denote respectively the magnetic field and the vector magnetic excitation in a vacuum and magnetized medium. According to [1.235]:   B Hv = v

μ0

   B ; Ha = a −M

μ0

[1.239]

 In a vacuum, the magnetic excitation vector H v is proportional to the magnetic    field B v [1.239]. Since µ0 > 0, then H v and H v have the same sense and direction. These are arbitrarily represented in Figure 1.33. However, in a magnetized   medium, the magnetic excitation vector H a and the magnetic field B a do not have

106

Electromagnetic Waves 1

 the same direction due to the magnetization vector M . We choose to only represent  the magnetic field B a .

Regardless of the current distribution considered, the divergence of the magnetic   field is zero in accordance with the Maxwell-flux equation: ∇ ⋅ B = 0 . If we consider a small cylinder with the base surface dS, center N and infinitesimal height h (Figure 1.33), we can express the total flux of the magnetic field leaving this cylinder. This flux is equal to the sum of the fluxes leaving the circular base surfaces dS with centers Nv and Na and flux leaving the lateral surface of the cylinder. Whereby: Φ tot =



(S )

  B a ⋅ dS +



(S )

  B v ⋅ dS + Φ sl = −



(S )

  B a ⋅ n dS +



(S )

  B v ⋅ n dS + Φ sl

Using the divergence theorem, it becomes:  

 τ (∇ ⋅ B ) dτ = − v

( )

(S )

  B a ⋅ n dS +



(S )

  B v ⋅ n dS + Φ sl = 0

That is:     B v ⋅ n dS − B a ⋅ n dS + d Φ sl = 0

[1.240] →



dS

Hv



n



Bv

Nv h

vacuum (S) magnetized medium

N



Ha Nd →

dS



Ba

Figure 1.33. Refraction of the magnetic field crossing a vacuum-magnetic medium surface of separation

Maxwell’s Equations

107

When Nv and Nd tend towards N, the lateral surface tends towards zero (h → 0) such that dΦ → 0. At point N, equation [1.238] gives the equality:     B v ⋅ n dS = B a ⋅ n dS  Bvn = Ban

[1.241a]

Result [1.241a] expresses the continuity of the normal component of the magnetic field crossing a vacuum-magnetic medium surface of separation. What about the magnetic excitation vector ? Using [1.239], from the first equality [1.241] we deduce the equation:

     ( µ0 H v ) ⋅ n dS = ( µ0 H a + M ) ⋅ n dS

[1.241b]

Using [1.231], we obtain:       µ0 ( H v ⋅ n − H a ⋅ n ) = M ⋅ n  µ0 ( H vn − H an ) = M n

So: H vn − H an =

Mn µ0

[1.241c]

According to [1.241c], the normal component of the magnetic excitation vector has a discontinuity Mn/µ0 across a vacuum-magnetic medium surface of separation. Now let us study the behavior of tangent components of the magnetic field and magnetic excitation vector. Considering a rectangular circuit (C) ABDF overlapping the vacuum-magnetic medium surface of separation and infinitesimal lengths AF and BD (Figure 1.34). We can simultaneously express the circulations of the magnetic field and the magnetic excitation vector along ABDF using Stokes’ theorem. In a vacuum of currents, equation [1.233] is written as follows:   B  ∇∧ =0

μ0

108

Electromagnetic Waves 1



n A

Hv





Bv B

Mv

vacuum M

(S)



Bd Md

magnetized medium

D



Hd

F Figure 1.34. Circulation of the magnetic field along an ABDF circuit overlapping a vacuum-magnetic medium surface of separation

With dC being the sum of the considered circulations along lengths BD and FA, considering the result above, we obtain:    B ∇ ∧ ( S )  μ0



  Bv Ba   +   ⋅ dS = (C )  μ 0 μ0  



   ⋅ dl '+ dC = 0  

Therefore:  B v  ⋅ dl −

( AB) μ0

 B a  ⋅ dl + dC = 0

( DF ) μ0

And ultimately:    B v B a   −   ⋅ dl + dC = 0   µ0 µ0 

  B v  B a  ⋅ dl − ⋅ dl + dC = 0 µ0 µ0

[1.242]

When points Mv and Md tend towards M, lengths BD and FA tend towards zero such that dC → 0. At point M, equation [1.242] gives:   B B B v  B a  ⋅ dl − ⋅ dl = 0  vT = aT = H vT = H aT µ0 µ0 µ0 µ0

[1.243]

Maxwell’s Equations

109

The last equalities in [1.243] reflect the continuity of tangent components of the magnetic field and magnetic excitation vector crossing a vacuum-magnetic medium surface of separation. 1.2.3.5. Linear and isotropic magnetic media, magnetic susceptibility

Let us consider a magnetic medium with magnetic permeability µ = µ (M). By definition, the magnetic medium is said to be linear and isotropic, if at any M in the medium, the application linking the magnetic excitation vector to the magnetic field is linear such that: µ = µ (M).   B   H =  B = µH

μ

[1.244]

According to [1.235]:    B = μ0 ( H + M )

[1.245]

By equalizing the last equality [1.244] and [1.245], we obtain:     µ − µ0  µH = μ0 H + μ0 M  M = H µ0

[1.246]

Therefore:   µ − µ0 J = χm H ; χm = µ0

[1.247]

In equations [1.247], the physical variable χm is known as the magnetic susceptibility of the medium. Analogous to the relative dielectric permittivity εr, the relative magnetic permeability µr of the medium is defined by the equation: µr =

µ = 1 + χm µ0

[1.248]

There are generally three types of magnetic media: paramagnetic, diamagnetic and ferromagnetic: – diamagnetism is a property of all materials capable of interacting with a magnetic field and can be observed in copper (Cu), bismuth (Bi), gold (Au), silver (Ag), hydrogen

110

Electromagnetic Waves 1

(H2), etc. By subjecting a diamagnetic material to a non-uniform magnetic field, induced currents arise in the material and oppose the inductive field under Lenz’s law. The resulting magnetic field is then reduced (the magnetic field lines become weak within the material and intense outside of it) and the material is moved outside the magnetic field. For a diamagnetic material: µr < 1 ; − 10− 4 < χ m < − 10− 9

[1.249]

The magnetic susceptibility χm is negative according to [1.249]: the    magnetization vector M = χ m H is opposite to the magnetic excitation vector H ; – paramagnetism is a characteristic property of materials whose electronic layers are incomplete. When a paramagnetic material is subjected to a magnetic field, the uncompensated electronic magnetic moments align with the field. Paramagnetism can be observed in aluminum (Al), tungsten (W), platinum (Pt), tin (Sn), oxygen (O2), etc. For a paramagnetic material: µr > 1 ; 10− 6 < χ m < 10− 4

[1.250]

The magnetic susceptibility χm is positive according to [1.250]: therefore, the    magnetization vector M = χ m H and the magnetic excitation vector H have the same sense. Unlike diamagnetic materials, magnetic field lines are more intense within a paramagnetic material than outside of it; – ferromagnetism is a property of certain materials resulting in the alignment of the magnetic moments following the direction of the magnetic field applied in a domain known as a Weiss magnetic domain (region of a ferromagnetic material of uniform magnetization, with dimensions ranging between 10 µm and 1 m). For a ferromagnetic material: µr >> 1 ; χ m >> 1

[1.251]

Since the magnetic susceptibility χm is positive, the magnetization vector and the magnetic excitation vector have the same sense. In addition, the magnetic field lines are more intense inside the material than outside it. Note the existence of ferrimagnetism, which is a special case of ferromagnetism, as shown in Figure 1.35. For the vaccum, µr = 1  χm = 0 according to [1.248].

Maxwell’s Equations

a) paramagnetism

b) ferromagnetism

c) anti ferromagnetism

111

d) ferrimagnetism

Figure 1.35. Illustration of the different types of magnetism: a) magnetic moments distributed irregularly; b) magnetic moments aligned in a Weiss domain (10 µm to 1 m); c) antiparallel magnetic moments with equal intensities; d) antiparallel magnetic moments with different intensities

Table 1.7 presents the relative permeability values for different magnetic materials at ambient temperature. Magnetic material

µr (maximum value)

Cobalt (Co)

200

Nickel (Ni)

600

Iron (Fe)

5,000

Table 1.7. Relative permeability of magnetic materials at ambient temperature

1.2.4. Maxwell equations in a polarized and magnetic medium 1.2.4.1. Couples of Maxwell’s equations in a polarized dielectric medium Let us take the two pairs of Maxwell’s equations grouped in Table 1.4 as well as the continuity equation [1.153] expressing the conservation of electric charge. We obtain the results as shown in Table 1.8 below.

112

Electromagnetic Waves 1

   ∂B ∇∧E =− ∂t   ∇⋅B = 0

First couple

∇∧ Second couple

B

μ0

= J free + ε 0

∇⋅E =

Maxwell-Faraday Maxwell-flux

∂E ∂t

ρ free ε0

Maxwell-Ampère

Maxwell-Gauss

Table 1.8. Maxwell equations couples

To establish the Maxwell equations in a polarized dielectric medium, we must take into account the electric displacement vector verifying [1.206]:       D = ε0 E + P  ε0 E = D − P

[1.252]

We claim that the first pair of Maxwell’s equations is valid both in a vacuum and in a dielectric. We now need to modify the equation couple. Using [1.252], we obtain: – Maxwell-Ampère:

∇∧

B

μ0

=J

free + ε 0

∂E ∂ε E ∂ ( D − P) = J free + 0 = J free + ∂t ∂t ∂t

[1.253a]

So:

∇∧

B

μ0

= J free +

∂D ∂P − ∂t ∂t

[1.253b]

– Maxwell-Gauss: to modify the Maxwell-Gauss equation, we use the local formula of Gauss’s theorem [1.25] considering the dielectric medium, with a charge volume density ρfree and a charge volume density of polarization ρpol ∇⋅E =

ρ free + ρ pol ε0

  ; ρ pol = − ∇ ⋅ P

[1.254]

Maxwell’s Equations

113

which gives: ∇⋅E =

ρ free − ∇ ⋅ P ε0

 ε 0 (∇ ⋅ E ) = ρ free − ∇ ⋅ P

therefore: ε 0 (∇ ⋅ E ) + ∇ ⋅ P = ρ free  ∇ ⋅ (ε 0 E + P ) = ρ free

And by considering [1.252]: ∇ ⋅ D = ρ free

This corresponds to the local equation [1.205] verified by the electric displacement vector. So, in a dielectric medium whose polarization is independent of time, the second Maxwell equation couple is written as follows:

∇∧

B

μ0

= J free +

∂D ; ∇ ⋅ D = ρ free ∂t

[1.255]

In Table 1.9, we summarize Maxwell’s equations in a dielectric with a steady state polarization.    ∂B ∇∧E = − ∂t

First couple

Second couple

∇∧

B

μ0

= J free +

  ∇⋅B = 0

∂D ∂t

∇ ⋅ D = ρ free

Table 1.9. Maxwell’s equations in a polarized dielectric medium

Considering Table 1.9, we notice that like in a vacuum, Maxwell’s equations are asymmetrical. The divergence of the magnetic field is zero while the divergence

114

Electromagnetic Waves 1

of the electric displacement vector is non-zero. The displacement vector flux is not conserved in a charged electric environment. 1.2.4.2. Maxwell’s equations in a polarized and magnetized material medium

In a polarized dielectric medium, the modified Maxwell-Ampère equation is written as follows:

∇∧

B

μ0

=J

free

+

∂D ∂t

[1.256]

In a polarized and magnetic material medium, we must consider the magnetization volume density vector J vmag = ∇ ∧ M :

∇∧

B

μ0

= J free +

B ∂D ∂D +∇∧M  ∇∧ − ∇ ∧ M = J free + μ0 ∂t ∂t

whereby: B ∇∧ −M  μ0 

  = J free + ∂ D  ∂t 

[1.257a]

By definition, in a polarized and magnetic material medium, the magnetic excitation vector is given by the expression:   B     H= − M  B = μ0 ( H + M )

μ0

[1.257b]

So, in a polarized and magnetic material medium, the modified MaxwellAmpère equation is written as follows: ∇∧H = J

free

+

∂D ∂t

[1.258]

In Table 1.10, we summarize Maxwell’s equations in a polarized and magnetic material medium.

Maxwell’s Equations

   ∂B ∇∧E = − ∂t

First couple

∇∧H = J

Second couple

free

+

115

  ∇⋅B = 0

∂D ∂t

∇ ⋅ D = ρ free

Table 1.10. Maxwell’s equations in a polarized and magnetic material medium

 Note the presence of a magnetic current distribution J mag . In the context of

diffraction theory, an equivalent magnetic charge ρ mag is introduced to make Maxwell’s equations more symmetrical (see the last column of Table 1.10). Thus, we modify the Maxwell-flux equation to transform a Maxwell-Thomson equation given by the equation:   ∇ ⋅ B = ρ mag

[1.259]

 Moreover, the magnetic current vector J mag and the magnetic charge ρ mag

would satisfy the continuity equation:   ∂ρ mag ∇ ⋅ J mag + =0 ∂t

[1.260]

 However, magnetic magnitudes J m and ρ m have no physical existence

theoretically demonstrated to date. Maxwell’s equations in a magnetic medium therefore remain equal to those grouped in Table 1.10. 1.2.4.3. Integral forms of Maxwell’s equations in a material medium

Depending on the problem to be addressed, Maxwell’s equations are used from their local expressions or in integral form as with the moment method or other methods based on finite elements. By considering a point N on surface (S) surrounding a polarized medium with volume τ. Where dQint = ρfree dτ the free charge contained in the elementary volume dτ. Using the divergence theorem: 



 

(S ) D ⋅ dS = (τ ) (∇ ⋅ D)dτ

116

Electromagnetic Waves 1

The Maxwell-Gauss equation is written as follows:

(τ ) (∇ ⋅ D)dτ =(τ ) ρ free dτ = Qint

[1.261]

Equation [1.261] expresses the electric charge contained in volume τ and the  vector field flux D across surface (S). Now let us consider a polarized and magnetic medium. Using the MaxwellAmpère equation, we express the circulation of the magnetic excitation vector along a closed contour (C) on which surface (S) is based. We obtain:   H ⋅ dl =

(C )

  ∂D    J tot +  ⋅ dS ( S )  ∂t 



[1.262]

This integral form of the Maxwell-Ampère equation expresses the circulation of  the vector field H along contour (C) and flux across surface (S) of the vector field   ∂D  J +  total . ∂t   Now let us express the circulation of the electric field along a closed contour (C) on which surface (S) is based. We obtain from the integration of the MaxwellFaraday equation:

  E ⋅ dl = −

(C )

 ∂B  dS ( S ) ∂t



[1.263]

Thus, since the divergence of the magnetic field is zero, then the integral form of the Maxwell-flux equation is written as follows:   B.dS = 0

(S )

[1.264]

This integral form expresses the fact that the flux of the magnetic field through a closed surface (Σ) is always zero. The integral forms of the Maxwell equations in material media are summarized in Table 1.11.

Maxwell’s Equations

  E ⋅ dl = −

(C )

First couple



Maxwell-Faraday

 

(SB).dS = 0   H ⋅ dl =

Second couple

 ∂B  dS ( S ) ∂t

117

(C )

  ∂D    J tot +  ⋅ dS ( S )  ∂t 



Maxwell-flux

Maxwell-Ampère

(τ ) (∇ ⋅ D)dτ =(τ ) ρ free dτ = Qint

Maxwell-Gauss

Table 1.11. Integral forms of Maxwell’s equations in a material medium

1.3. References Amzallag, E., Cipriani, J., Aïm, J.B., Piccioli, N. (2006). Électrostatique et électrocinétique. Dunod, Paris. Annequin, R., Boutigny, J. (1974). Électricité 2. Vuibert, Paris. Bauduin, J.-M., Guérillot, A. (2001). Électromagnétisme. Ellipses, Paris. Benson, H. (2015). Électricité et magnétisme. De Boeck, Brussels. Bok, J., Hulin-Jung, N. (1979). Relativité, ondes électromagnétiques. Hermann, Paris. Bruneaux, J., Saint-Jean, M., Matricon, J. (2002). Électrostatique et magnétostatique. Belin, Paris. Faroux, J.-P., Renault, J. (1988). Électromagnétisme. Dunod, Paris. Krempf, P. (2004). Électromagnétisme MP. Bréal, Paris. Mauras, D. (1999). Électromagnétisme. PUF, Paris. Sakho, I. (2018). Électrostatique, magnétostatique et induction électromagnétique. Résumés de cours et 120 exercices corrigés. Ellipses, Paris. Stöcker, H., Junt, F., Guillaume, G. (2007). Toute la physique. Dunod, Paris.

2

The Propagation of Optical and Radio Electromagnetic Waves Hervé SIZUN ArmorScience, Lannion, France

2.1. Introduction An electromagnetic wave is the propagation of an electrical disturbance of the matter: a static charge creates an electric field, a charge that moves creates a magnetic field, a disturbance in both creates an electromagnetic field that moves in space (vacuum, air, materials, etc.), that is an electromagnetic wave. The parameters characterizing the propagation of electromagnetic waves are the    electric field E , the magnetic field H , the electrical induction D and the magnetic  induction B (Jouget 1978).

  Only the vectors E and B produce actions through which it is possible to    measure the electromagnetic field. The vectors D and B are linked to vectors E  and H by the following linear equations:   D =εE

[2.1]

  B = μH

[2.2]

For a color version of all figures in this book, see www.iste.co.uk/favennec/electromagnetic1.zip. Electromagnetic Waves 1, coordinated by Pierre-Noël FAVENNEC. © ISTE Ltd 2020 Electromagnetic Waves 1: Maxwell’s Equations, Wave Propagation, First Edition. Pierre-Noël Favennec. © ISTE Ltd 2020. Published by ISTE Ltd and John Wiley & Sons, Inc.

120

Electromagnetic Waves 1

The coefficients ε and μ depend on the medium in which the electromagnetic wave propagates. For homogeneous and isotropic media, ε and μ are constants. These are respectively known as the dielectric (or permittivity) constant and the magnetic permeability constant. In a vacuum, they have the following values:

ε 0 = 10 −9 / 36π = 8.842 × 10−12

[2.3]

μ0 = 4π × 10 −7

[2.4]

The permittivity ε 0 and the magnetic permeability μ0 values in a vacuum are respectively expressed in Farad/meter (F/m) and Henry/meter (H/m). In a material medium, it is typical to link these coefficients to those of a vacuum by the following equations:

ε = ε0 × εr

[2.5]

μ = μ0 × μ r

[2.6]

where ε r and μ r are respectively the permittivity and the relative magnetic permeability of the medium. The permittivity and the magnetic permeability characterize the refractive index of the medium defined by the following equation:

n = εμ

[2.7]

When there are charged particles in motion (with density ρ) in space, this transfer of charges creates an electric current which is characterized by its density,   vector J . The transfer of electric charges, described by vector J , can simply be the    result of the effect of an electric field E . In this case, J is proportional to E and for a homogeneous and isotropic medium, we obtain:

  J =σE

[2.8]

The coefficient σ is the electrical conductivity of the medium. It is measured in Mhos per meter or Siemens per meter (Sm-1).

The Propagation of Optical and Radio Electromagnetic Waves

121

NOTE.– The transfer of charges can also occur due to an external cause entirely independent to the electromagnetic field (for example, the action of a generator with  its own energy source). In this case, it affects vector J with index 0. Also, in the general case we have the following:    J = J0 + σ E

[2.9]

2.2. Maxwell’s equations The vast world of electromagnetism is described by Maxwell’s four equations which mathematically model the interactions between electric charges, electric currents, electric fields and magnetic fields. They associate the following five     parameters that define the electromagnetic state of a medium: E , B , D , H and  J. 2.2.1. Maxwell-Gauss equation A charged body or particle is a concentration of electric charges with the same  sign. This causes an electric field E to appear in the surrounding space. The Maxwell-Gauss equation states that the divergence of the electric field is proportional to the distribution of electric charges:    ρ ∇.E = divE =

ε0

[2.10]

where: – ρ is the density of electric charges; – ε 0 is the permittivity in a vacuum. For more details concerning the mathematical tools used in the remainder of this chapter (gradient, divergence, rotational, Laplacian, etc.), the reader should refer to Appendix 2 on vector calculations. The density of electric charges is measured in Coulomb/m (linear density), Coulomb/m2 (surface density) or Coulomb/m3 (volumetric density), according to whether the charges are distributed linearly, across a surface or in a volume in the MKSA international system (meter, kilogram, second, ampere).

122

Electromagnetic Waves 1

The permittivity of a vacuum or dielectric constant is expressed in H/m (Henry per meter). According to the Maxwell-Gauss equation, the electric field is divergent or convergent according to the sign of the charge from the source and is proportional to the distribution of these charges. The electric field lines begin in the center and diverge towards infinity (Figure 2.1). The greater the charges, the more intense the field.

Figure 2.1. Configuration of field lines of the electric field

2.2.2. Maxwell-Thompson equation The divergence of the magnetic field is zero:

   ∇.B = divB = 0

[2.11]

The magnetic field is not divergent: the magnetic field lines do not go to infinity. The field lines go from one pole to another (Figure 2.2). There is no magnetic monopole unlike the existence of an electric monopole such as an electron, which is negative, or a proton, which is positive. If we split a magnet into two parts, we obtain two magnets each with a north pole and a south pole.

The Propagation of Optical and Radio Electromagnetic Waves

123

Figure 2.2. Configuration of magnetic field lines

2.2.3. Maxwell-Faraday equation The rotational of the electric field is proportional to the variation in the magnetic field with time:

   ∂B ∇∧E = − ∂t

[2.12]

It is the variation in magnetic field (and not the magnetic field itself) that produces an electric field. If we place a magnet in a coil, nothing happens. However, if you twist and turn the magnet, it creates an electric field around it, which in turn generates an electric current in the wire. For example, the dynamo of a bicycle only provides power to its lights when it moves. This dependence of electrical phenomena on the variation in magnetic field was discovered by Faraday. 2.2.4. Maxwell-Ampère equation The rotational of the magnetic field is the sum of its dependence on the variation in electric field over time and on a fixed electric current:

    ∂E ∇ ∧ B = μ0 J + ε 0 μ0 ∂t

[2.13]

124

Electromagnetic Waves 1

The magnetic field is due to the variation in electric field over time. It also depends on an electric current in the case of an electrical conductor. The current does not need to vary for there to be a magnetic field, whereas the magnetic field must vary to generate an electric current. The Maxwell-Faraday and Maxwell-Ampère equations show that both electric and magnetic fields are coupled and that the variation in one is proportional to the intensity of the other’s field. They describe the conversion of the magnetic component of an electromagnetic wave into its electric component and vice versa. An electromagnetic wave can therefore propagate without any other support than from itself.  If the term μ0 J is removed from the Maxwell-Ampère equation, we find it is

symmetrical to the Maxwell-Faraday equation. 2.3. Solving Maxwell’s equations Solving Maxwell’s equations in free space leads us to the Helmholtz equation for     each of the following vectors: E , B , D and H .

 For field E we have the following equation:  ∂2  Δ − εμ 2 ∂t 

  E = 0 

[2.14]

where Δ is the Laplacian operator: grad(div) – rot (rot) (see Appendix 2). By limiting ourselves to a purely sinusoidal solution, it can be written in the following form: E = E0 exp  j (ω t − kz ) 

where: – E0 is the amplitude of the field; – ω = 2π f is the angular frequency;

[2.15]

The Propagation of Optical and Radio Electromagnetic Waves

125

– t is the elapsed time; – k is the wave number; – z is the distance traveled along axis z. The wave number represents the rate of variation in the field phase at distance z. This is a magnitude proportional to the number of oscillations that a wave travels per unit length. The wave phase has a kz radian variation over a distance of z meters. At the surface of separation of two media with different dielectric characteristics, we have the continuity of tangent component of the electric and magnetic fields and the continuity of normal components of electrical and magnetic inductions. 2.4. Characteristics of electromagnetic waves 2.4.1. Propagation speed

 The Helmholtz equation shows that the oscillations of vector E in constant phase propagate in space in the form of a wave with a propagation factor γ such that:

γ 2 = εμ

∂2 ∂t 2

[2.16]

The expression of γ2 for a non-absorbent medium is equal to:

γ2 =

1 ∂2

ν 2 ∂t 2

[2.17]

By comparing the equations, we see that the propagation rate of electromagnetic waves is therefore equal to:

ν=

1

εμ

[2.18]

In a vacuum we have: 1

ε 0 μ0

= c = 3 × 108 m / s

where constant c is the speed of light.

[2.19]

126

Electromagnetic Waves 1

2.4.2. Wavelength and/or frequency Solving Helmholtz equations in the case of an electromagnetic plane wave shows   that the electric field E and magnetic field H vectors are perpendicular and oscillate in phase in time and space. Here we refer to a transverse electromagnetic (TEM) wave. The electric and magnetic fields propagate in phase, perpendicular to one another (Figure 2.3).

Figure 2.3. Diagram depicting the propagation of an electromagnetic wave

The wavelength and the frequency are linked by the equation:

λ=

ν f

=



ω εμ

=νT

[2.20]

where: – f is the wave frequency in Hertz; – ω is the pulsation; – T is the period. The wavelength represents the distance the wave phase varies by 2π. The wavelength and/or the frequency characterize the electromagnetic wave, its propagation and its application domain.

The Propagation of Optical and Radio Electromagnetic Waves

127

Electromagnetic waves have different frequency ranges: ELF waves (f < 3 kHz), VLF waves (3 kHz < f < 30 kHz), LF waves (30 kHz < f < 300 kHz), MF waves (300 kHz < f < 3 MHz), HF waves (3 MHz < f < 30 MHz), VHF waves (30 MHz < f < 300 MHz), UHF waves (300 MHz < f < 3 GHz), SHF waves (3 GHz < f < 30 GHz), EHF waves (30 GHz < f < 300 GHz), infrared waves (3 THz < f < 430 THz) and optical waves (430 THz < f < 860 THz). For more details on the terrestrial influences, the system considerations and the services associated to each, the reader should refer to Appendix 3 on frequency spectrum. 2.4.3. The characteristic impedance of the propagation medium

The ratio of amplitude of the electric field to the amplitude of the magnetic field is: 1

Ex  μ  2 = = Zc H y  ε 

[2.21]

We verify that this ratio has the physical dimensions of an electrical resistance. We call this the characteristic impedance of the propagation medium. For a vacuum its value is: 1

 μ 2 Z 0 =  0  = 377Ohms  ε0 

[2.22]

NOTE.– The characteristic impedance does not only depend on the propagation medium, it also depends on the type of wave (TEM wave – transverse electromagnetic wave, spherical wave, guided wave). We therefore call Z0 the wave impedance. 2.4.4. Poynting vector

Measured in Watts per square meter (W/m2), the Poynting vector describes the amplitude and the direction of the flow of power transported by the wave per square meter of surface parallel to the plane (x, y), that is the power density. Its instant value is given by the following equation:

   P= E∧H

[2.23]

128

Electromagnetic Waves 1

Its average value over a given period, representing the actual power transported by the wave, is generally used. It is given by the following equation: Paverage =

E0 × H 0 2

[2.24]

2.4.5. The refractive index

The refractive index plays an important role in the troposphere. The refractive index gradients in the vertical profile create guide layers for electromagnetic radiation. If these guide layers are wide enough, they can cause significant variations in the level of the direct signal, variations in angles of arrival and the appearance of multiple paths which interfere with the receiver. It is defined by the following equation:

n = ε r μr

[2.25]

The resulting propagation velocity is equal to:

ν=

1

ε 0ε r μ0 μ r

=

1

ε 0 μ0

×

1

ε r μr

=

c n

[2.26]

In an absorbent medium, the refractive index can be written in the following complex form: n = n '− in "

[2.27]

The wave field becomes: E = E0 exp  j (ω t − nk0 z ) 

[2.28]

E = E0 exp  j (ωt − ( n '− in ") k0 z ) 

[2.29]

E = E0 exp ( − n " z ) exp  j (ω t − n ' k0 z ) 

[2.30]

The term exp(-n”z) represents the attenuation of the wave across the propagation medium.

The Propagation of Optical and Radio Electromagnetic Waves

129

The imaginary part of the refractive index represents the attenuation coefficient of the wave (α in m-1). It depends on the permittivity, the permeability and the conductivity (Sm-1 or (Ωm)-1) of the medium, as well as the wave frequency. The dielectric parameters such as permittivity, permeability and conductivity characterize the propagation media, the materials. The field decreases exponentially as a function of distance. The distance over which the field decreases by a ratio of e (is divided by e) is known as the penetration depth (δ in m). It is given by the relation:

δ=

1

α

[2.31]

2.4.6. Polarization

An electromagnetic wave has two active orthogonal components (the electric field vector and the magnetic field vector), which are in phase in time and space (Figure 2.4). The polarization plane is defined by the direction of propagation (Oz) and that of the electric field (Ox). Figure 2.4 shows a vertically polarized wave. The polarization direction is determined by the direction in which it was generated. The use of vertical dipole antennas makes it possible to emit such a polarization. However, if the electric field is horizontal, we refer to horizontally polarized transverse electromagnetic waves (TEM waves). Since Maxwell’s equations are linear, we can linearly combine several transverse electromagnetic waves: E x = E1 exp  j (ω t − β z ) 

[2.32]

E y = E2 exp  j (ω t − β z + ψ ) 

[2.33]

where:

β=

ω 2π f = ν cλ

[2.34]

and ψ represents the phase difference of the second wave with respect to the first.

130

Electromagnetic Waves 1

In a given wave plane (for example z = 0), the extremity of the resulting electric    field E = E x + E y describes an ellipse whose equation is obtained in the parametric form by taking the real parts of both equations below and by making z = 0: E x = E1 cos (ω t )

[2.35]

E y = E2 cos (ωt +ψ )

[2.36]

We call this wave an elliptically polarized plane wave. When E1 = E2 and if Ψ = π / 2 , the ellipse transforms into a circle and the wave becomes circularly polarized.

 Depending on the direction along which E rotates, the polarization can be left circular (levogyrous) or right circular (dextrogyrous) polarization. Figure 2.4 illustrates these different types of polarization.

Figure 2.4. The different polarization states for a wave propagating in direction z

The Propagation of Optical and Radio Electromagnetic Waves

131

2.4.7. Transpolarization

In order to increase the transmission capacity on a given link, without increasing the bandwidth of the signal used, orthogonal rectilinear or circular polarizations are generally used. Unfortunately when passing through the atmosphere, mainly due to the presence of asymmetric raindrops and ice crystals, or even clear air, part of the energy radiated with a certain polarization is found on the orthogonal polarization thus causing interference between the two channels. Depolarization is thus the phenomenon by which all or part of a radioelectric wave emitted with a given polarization no longer has any determined polarization after propagation. Transpolarization is the appearance, during propagation, of an orthogonal polarization component (cross-polar component) to the initial polarization (co-polar component). This phenomenon can be caused by rain or hydrometeors in the troposphere, multipath propagation, tropospheric scintillation or ionospheric scintillation.

Figure 2.5. Schematic of transpolarization

Two parameters characterize this transpolarization: the polarization discrimination or the decoupling ratio XPD and the polarization isolation XPI. 2.4.7.1. Polarization discrimination (XPD)

The polarization discrimination or decoupling ratio (XPD) is the ratio, at the receiving point, of the power received with the initial polarization, to the power received with orthogonal polarization, and this for an electromagnetic wave emitted with a given polarization. It expresses how much a wave with a given polarization is found with orthogonal polarization. It depends on the propagation medium crossed by the wave. It is expressed in decibels: E  XPD = 20 log  ac   Eax 

[2.37]

132

Electromagnetic Waves 1

It is closely linked to the co-attenuation of the wave. Many models of this exist in the literature. 2.4.7.2. Polarization isolation (XPI)

When two orthogonally polarized components Ea and Eb are emitted at the same level, the ratio of copolar power Eac (or Ebc) to contrapolar power Ebx (or Eax) defines the polarization isolation XPI. These two ratios play an important role in the design of systems. The value of the ratio Eac/Ebx is not necessarily the same as that of the ratio Ebc/Eax. It expresses how much two orthogonally polarized signals, transmitted simultaneously, interfere at the reception. It depends on the propagation medium crossed by the wave. It is expressed in decibels: E  XPI = 20 log  ac   Ebx 

[2.38]

2.4.8. Different propagation paths

Mobile radio propagation, in particular, is a multi-path propagation (we also find this in ionospheric propagation with reflection on the different layers). Signals often follow paths of different lengths, travel times and arrive at the receiver in different phases. Among these paths we distinguish: – direct paths: the waves follow the line segment passing through the point of emission and reception; – transmitted paths: generally, the direct route does not exist. It is often obstructed by buildings, vegetation, etc; it does not usually play a very important role; – reflected paths: the waves arrive at the receiver following reflections on different obstacles (building facades, mountainsides, on the ground, etc.). These different paths contain enough energy to be efficient; – diffracted paths: waves can bypass obstacles by diffraction (vegetation, buildings, roof edges, hills, etc.; – diffused paths: this phenomenon is encountered more particularly when the wave encounters surfaces that are not smooth (soil, vegetation, sea, etc.) or small heterogeneities compared to the wavelength. The notion of a smooth surface is closely related to the frequency.

The Propagation of Optical and Radio Electromagnetic Waves

133

These different paths, with different amplitudes and phases, interfere when arriving at the receiver. Interference is either constructive (the paths arrive in phase) where there is signal reinforcement, or destructive, where there is attenuation of the signal. In addition, it should be noted that the mobile itself moves inside this figure of interferences. It successively detects bright and dark bands (interference fringes) causing attenuation of the signal. 2.4.9. Fresnel zones

The study of electromagnetic waves between an emitter E and a receiver R leads to the subdivision of the propagation space with a family of ellipsoids, called Fresnel ellipsoids, with points E and R being their focal points, such that any point M of one of these ellipsoids satisfies the relation (Figure 2.6): EM + MR = ER + n

λ

[2.39]

2

where: – n is an integer that characterizes the ellipsoid considered (n = 1 characterizes the first Fresnel ellipsoid, etc.); – λ is the wavelength. As a general rule, the propagation is considered to be in the line of sight, that is to say with negligible diffraction phenomena, if there are no obstacles inside the 1st Fresnel ellipsoid. The latter delimits the region of space where almost all of the energy passes.

M r E

A A

d1

d2

R

P

Figure 2.6. Schematic representation of Fresnel zones

134

Electromagnetic Waves 1

The radius of the nth ellipsoid at a point on the path situated at a distance d1 from E and a distance of d2 from R (d1 + d2 = d, provided that d1 and d2 are large in relation to the radii of the ellipsoids) is given by the following equation: nλ d1d 2 d1 + d 2

Rn =

[2.40]

The radius of the first ellipsoid is equal to: r=

λ d1d 2 d1 + d 2

[2.41]

The maximum value at the middle of the path of this radius is: rmax =

1 λd 2

[2.42]

For example: d = 1 km f = 900 MHz, λ = 33 cm, rmax = 9 m f = 1 800 MHz, λ = 16.5 cm, rmax = 6.4 m 2.4.10. Fundamental properties of the propagation channel

Due to the presence of multiple paths and the movement of the receiving station, the propagation channel has three fundamental properties: attenuation, variability and frequency selectivity. The notion of attenuation was sufficient to study the propagation channel. In the context of digital communication, the fading of signals due to variability and selectivity induces degradations in the quality of the communication, independently of the attenuation. 2.4.10.1. Propagation attenuation

Different models of attenuation are defined in the literature. We generally distinguish the free-space attenuation and the attenuation relative to free-space (excess attenuation).

The Propagation of Optical and Radio Electromagnetic Waves

135

Free-space attenuation is the transmission attenuation due to the dispersion of the wave energy which would be obtained if the antennas were replaced by isotropic antennas, placed in a perfect, homogeneous and unlimited dielectric medium, with the distance between antennas being preserved. It is given by the following equation:  4π d  A0 =    λ 

2

[2.43]

In the logarithmic form it becomes: A0 ( dB ) = 32.4 + 20 log10 ( f ) + 20 log10 ( d )

[2.44]

where: – A0(dB) is the attenuation in decibels (see Appendix 4); – d is the distance between the transmitter and the receiver (km); – λ is the wavelength (km); – f is the frequency (MHz). For example: d = 1 km f = 900 MHz, A0 = 91.4 dB f = 1,800 MHz, A0 = 97.4 dB This assumes that only one radioelectric path has its first Fresnel ellipsoid cleared. This is an expression in 1/d2 (energy conservation). This means that 6 dB is lost each time the distance is doubled. The frequency dependence (1/f2) depends on the configuration of the transmission (point-to-point propagation, radio-mobile propagation). The excess attenuation, with regard to free-space attenuation, is the difference between propagation attenuation and free-space attenuation (absorption by gases, hydrometeors, walls, vegetation, diffraction attenuation, etc.).

136

Electromagnetic Waves 1

2.4.10.1.1. Point-to-point links

The two antennas (transmitter and receiver) are orientated towards one another. The reasoning proceeds from the consideration of the volume of the antenna that is its equivalent area. The power received, as a function of the transmitted power Pe, is equal to: Pr = Pt . Ae . Ar . f 2

[2.45]

where: – Ae is the equivalent area of the transmitting antenna; – Ar is the equivalent area of the receiving antenna. In this case there is an increase of 6 dB each time the frequency is doubled. 2.4.10.1.2. Radiomobile link

In radiomobile communication, the base station ignores the position of the mobile. The size of the receiving antennas becomes smaller and smaller as the frequency increases. Omnidirectional antennas are used and therefore not pointed ones. The power received is the product of the gains of the antennas (transmitter (Ge) and receiver (Gr)) by the power transmitted over f2.

Pr =

Pt .Ge .Gr f2

[2.46]

6 dB is lost every time the frequency is doubled. 2.4.10.2. Variability

The radiomobile environment fluctuates. The passage of vehicles and people, the wind in the trees, the opening of doors cause fluctuations in radioelectric paths and generate rapid variations in the observed signal. Combined with the movement of vehicles, these phenomena create variability in the propagation channel in space and time. Signal variations are of a random nature. Statistical analyses will assess the impact of multi-paths on the transmission of radiomobile systems. The law of the field received and the average signal fading time, for example, are essential data to determine the size of the transmission equipment and the devices used to prevent it (interlacing, diversity).

The Propagation of Optical and Radio Electromagnetic Waves

137

Modeling of rapid variations has been proposed (Clarke 1968). Assuming that the mobile moves in an interference figure generated by the superposition of a large number of plane waves of independent amplitudes, phases and random directions, the received field (the complex envelope) is, by the application of the central limit theorem, a Gaussian variable. The envelope of the narrowband signal, the received power, then follows Rayleigh’s law. This is the concept of Rayleigh fading. The probability density of a random variable R following Rayleigh’s law is given by the following equation:  x2 exp  − 2 σ2  2σ f R ( x ) = 0, x > 0 fR ( x) =

x

  , x ≥ 0 

[2.47]

It is characterized by the parameter σ where σ2 represents the average power of the signal. It is observed in the presence of multiple paths in an obstructed link configuration where the contribution of each path is equivalent. In the case of a predominant path (visibility, open environment such as suburbs, rural, etc.), the envelope of the narrowband signal, the received power, then follows Rice’s theorem whose density of probability is given by:  x2 + r 2 exp  − σ2 2σ 2  f R ( x ) = 0, x > 0 fR ( x) =

x

  xr   I 0  2  , x ≥ 0  σ 

[2.48]

where I0 is a modified Bessel function of the first kind and order 0. Rician fading is characterized by the parameters r and σ. It is observed when one path is predominant. Rice’s theorem corresponds to Rayleigh’s law when r = 0 (absence of a direct path) and identifies a direct route and its preponderance. It is also characterized by the coefficient K (Rician parameter) defined by the equation:

 r2 K = 10 log  2  2σ 

  

[2.49]

The parameter K represents the ratio between the power of a direct path and the power contribution of secondary paths obeying Rayleigh’s law. The larger parameter K, the greater the power of the direct path compared to multiple paths and

138

Electromagnetic Waves 1

the more the link is cleared. Conversely if the predominant path is weak (K≤ -5 dB), Rice’s law is considered to be Rayleigh’s law. The value of K depends on the environment (dense urban, suburban, rural, etc.). Other laws, such as those of Weibull and Nakagami (Braun and Dersch 1991) also characterize the envelope of the mobile signal. They are less frequently used than Rice and Rayleigh’s laws, which are more easily implemented in calculation software because they are generated by Gaussian variables. For more details concerning these various laws, characterizing the distribution of the rapid variations in radiomobile signals, the reader should refer to the recommendation ITU-R P.1057. In order to determine the law of variation followed by the signal, statistical tests are applied, for example the Kolmogorov-Smirnov test (Barbot et al. 1992) on these rapid variations, resulting from the interferences of received waves. Knowing the statistical characteristics of the signal (probability density, cumulative distribution function), it is possible to determine the parameters relevant to the operation of a radioelectric system, including: – the probability of going below a certain level. When the signal strength is below the noise threshold tolerated by the receiver (thermal noise, interference, industrial noise, etc.), the signal is masked by noise. The receiver is then unable to correctly interpret the transmitted information; – the statistical duration of fading. During the fading, the mass of information is lost. The slower the mobile moves, the longer the cut-off times. Some orders of magnitude are given in Table 2.1 at 900 MHz (Guisnet 1998). We see that fading above 10 dB is very frequent: it appears in 10% of cases. For a pedestrian at 4 km/h, the average duration of signal fading is 40 ms; it is only 4 ms for a vehicle at 40 km/h. A high-speed mobile establishes communication with errors almost uniformly distributed in time, while a pedestrian sees this communication weakened or interrupted for a relatively long time. Average fading duration Level of signal fading P(x < with respect to average threshold) (%) field 27% -5 dB 10% -10 dB 1% -20 dB 0.1% -30 dB

f = 900 MHz v = 4 km/h

f = 900 MHz v = 40 km/h

80 ms 40 ms 12 ms 4 ms

8 ms 4 ms 1 ms 0.4 ms

Table 2.1. Statistical characterization of deep fade

The Propagation of Optical and Radio Electromagnetic Waves

139

Variability due to movement can also be characterized by the Doppler spectrum. It is obtained from the power spectral density of the function T(f0,t). A pure frequency line at the transmission is enlarged in proportion to the speed of the mobile. The Doppler spectrum is distributed over the frequency interval [f0 – fd, f0 + fd] where f0 is the emitted frequency, fd is the maximum Doppler frequency given by the equation: fd = f0

ν

[2.50]

c

where ν is the velocity of the mobile and c the velocity of the electromagnetic wave. The typical Doppler spectrum is given by the following equation: S( f )=

1 2

(f

2 d

− f2

)

=

1  f  fd 2 1 −    fd 

2

[2.51]

where f belongs to the interval [− fd, + fd]. The Doppler spectra deduced from the measurements (Gollreiter 1994; Codit 1994; Dersch and Zollinger 1994) clearly show asymmetries in the spatial frequency domain that confirm, particularly in line-of-light situations, preferred directions of arrival. The inverse of the width of the Doppler spectrum (the Doppler dispersion) is known as the coherence time. This is the time during which the function T(f0,t) can be considered to be almost constant: the time during which a moving receiver would not perceive the channel variability. To combat deep fade, data interlacing and diversity techniques (microdiversity, frequency) are used (Fechtel and Meyr 1993; Visoz et al. 1998; Rappaport 2009). 2.4.10.3. Frequency selectivity

When the differences between the delays of the multiple paths are large, the transfer function is no longer constant over the entire width of the spectrum: the

140

Electromagnetic Waves 1

propagation loss depends on the chosen frequency. The channel is said to be frequency selective. Broadband channel modeling is therefore essential to assess the performance of a complete transmission chain, design new systems and ensure the quality of digital signal transmission. Since multiple paths overlap in a linear fashion, the channel is generally represented by a time-variable linear filter of the WSSUS type (Wide Sense Stationary Uncorrelated Scattering) (Bello 1963) stationary in the broad sense where the diffusers are uncorrelated. The echoes perceived by the receiver come from a set of uncorrelated sources: two echoes with different propagation delays are uncorrelated. This property however is extremely difficult to verify but it is considered, in practice, to be applied over distances of a few wavelengths. The radioelectric channel is represented by its impulse response that is variable over time, h(t,τ), with τ being the delay and t the dependence on time (and therefore in space too since the vehicle is moving). As a function with two variables, it expresses the three characteristics of the channel: the attenuation, the variability (t) and the selectivity (τ). The dual variables, by Fourrier transform of τ and t, are respectively the frequency and the Doppler speed (Parsons 1992; Kattenbach and Fruchting 1995). 2.4.10.3.1. The different representations of the radiomobile channel

Four representations are thus possible, the connections of which can be represented in the following way (Figure 2.7) (Bello 1963); F and F-1 represent respectively the direct and inverse Fourier transforms. time-delay τ constant

Delay-Doppler

t constant

h (t ,τ )

F −1 F

F−1

S (τ ,ν )

T ( f ,t)

F −1

F ν constant

frequency-time

F

frequency-Doppler H ( f ,ν )

F −1 F f constant

Figure 2.7. Representation of the different Fourier transforms on impulse response

The Propagation of Optical and Radio Electromagnetic Waves

141

Time-delay representation

The time-delay representation describes the output signal y(t) as a function of the input signal x(t) in the form of a convolution equation whose kernel is variable over time: ∞



y ( t ) = h ( t ,τ )x ( t − τ ) dτ

[2.52]

0

where h(t,τ) is the response at instant t to a radioelectric impulse x(t) transmitted at t-τ. It defines the propagation channel and can differentiate the different echoes as a function of their propagation delays. t

h (t ,τ )

T τ (t 3 )

t3

τ (t 2 )

t2

τ ( t1 )

t1

τ ( t0 )

t0

τ Figure 2.8. Representation of the temporal evolution of the propagation channel impulse response

The delay-Doppler-shift representation

The delay-Doppler shift representation S(τ,ν) is very attractive from a physical analysis point of view of propagation paths. It also allows you to follow the evolution of the different propagation paths when moving a mobile at constant speed. On the other hand, for a stable propagation path, the evolution of the frequency offset will provide information on its angle of arrival. This function S(τ,ν) is defined by: y (t ) =

+∞ ∞

  x ( t − τ )S (τ ,ν ) e

−∞ −∞

2π jτ t

dν dτ

[2.53]

142

Electromagnetic Waves 1

with: h ( t ,τ ) =

+∞

 S (τ ,ν )e

2π jν t



[2.54]

−∞

Doppler frequency shift – frequency representation

The dual function H(f,ν), of function h(t,τ), represents the Doppler frequency shift as a function of frequency. This function is defined as follows: Y(f)=

+∞

 X ( f −ν )H ( f ,ν ) dν

[2.55]

−∞

where X(f) and Y(f) are respectively the Fourier transforms of x(t) and y(t). This function directly identifies each frequency shift. It also characterizes the channel frequency selectivity. Attenuation-time representation

The transfer function T(f,t) allows, as a function of time, multiple path effects (temporal attenuation, or when the mobile is in motion, spatial attenuation) to be studied and the characterization of the narrowband propagation channel. It is defined by the equation: y (t ) =

+∞

 X ( f )T ( f , t ) e

2π jft

df

[2.56]

−∞

2.4.10.3.2. Broadband representation of the radiomobile channel

It is typical to qualify the selectivity of the channel by parameters deduced from the mean delay profile of the impulse response. The most used are the mean delay, delay spread, delay interval, delay window and channel coherence bandwidth (Failly 1989). Average power density

The average power density P(τ) of the impulse response (average delay profile) is defined using h(t,τ) by the equation:

The Propagation of Optical and Radio Electromagnetic Waves

1 P (τ ) = T

143

2

T

 h ( t ,τ )

dt

[2.57]

0

It corresponds to an average, over a certain duration, where the WSSUS property applies. The duration T (Figure 2.9) is chosen so that over this time period, the measured impulse responses can be represented by a stationary and ergodic random process (Lavergnat and Sylvain 1997). Figure 2.9 gives, in a microcellular context, an example of the variation of the impulse response |h(t,τ)| when the mobile turns a street corner. The received power is reduced by 30 dB and the shape of the response is modified in a significant way.

Figure 2.9. Evolution of the impulse response: turning a street corner in the microcellular environment (Paris, 900 MHz, FTR&D sounder)

Mean delay The mean delay is the average of the delays weighted by their power. It is given by the first order moment of the impulse response:

τ m (t ) =

1 Pm

τ3

 (τ − τ

τ LOS

LOS

)P ( t ,τ ) dτ

[2.58]

144

Electromagnetic Waves 1

where: – τLOS is the propagation time in line-of-sight; – τ3 is the instant where P(τ) exceeds the cut-off threshold for the last time; – Pm is the total energy of the impulse response, defined by the following equation: τ3

Pm =

 P (τ )dτ

[2.59]

τ0

where: – P(t,τ) is the power density of the impulse response; – τ is the excess delay; – τ0 is the instant where P(τ) exceeds the cut-off threshold for the first time. The delay spread

The delay spread or the standard deviation of the delays weighted by their power is given by the second moment of the impulse response:

Delay − spread ( t ) =

 τ3  2 1  1 τ P (τ ) dτ  − τ P τ d τ ( ) Pm  Pm  τ0  τ0  τ3





2

[2.60]

The delay spread illustrates the risk of the occurrence of inter-symbol interferences and the disturbances that these strong distant echoes may induce. Delay interval

The delay interval at X dB is defined as the time interval between instant τ0 where the amplitude of the impulse response crosses a given threshold for the first time and instant τ3 where this amplitude becomes lower than this given threshold for the first time.

The Propagation of Optical and Radio Electromagnetic Waves

145

Power

X dB Threshold

τ0

τ

τ3 Figure 2.10. Example of a power delay profile; highlighted by the delay interval at X dB

Delay window

The delay window at y%, is the duration of the central portion (τ2–τ1) of the impulse response that contains y% of the total energy. Instants τ1 and τ2 are defined by the equation: τ2

 τ

y P (τ )dτ = 100

1

τ3

y

 P (τ )dτ = 100 P τ

[2.61]

m

0

Power

1− y   2

  % Pm (τ ) 

y % Pm (τ ) τ1

τ2

Figure 2.11. Example of a power delay profile; highlighted by the delay window at y%

τ

146

Electromagnetic Waves 1

Coherence bandwidth

The coherence bandwidth (Bcoherence) of the channel is defined as follows. Here C(t,f) is the autocorrelation of the transfer function (Fourier transform of the impulse response power):

C (t, f ) =

τ3

 P (τ )e τ

−2π jft



[2.62]

0

The correlation bandwidth is defined as the frequency for which |C(t,f)| is equal to x% of C(t,f = 0) (Parsons 1992). This indicates the selective attenuation amplitude as a function of frequency separation. The correlation bandwidth is therefore the frequency from which the autocorrelation function of the transfer function crosses a given threshold. To analyze the experimental data, the ITU-R recommends the use of delay intervals for thresholds of 9, 12 and 15 dB below the peak value and the delay windows for 50%, 75% and 90% energy and a correlation bandwidth for a 50% and 90% correlation. The correlation band is linked to the delay spread by the following equation (Lee 1986): Bcoherence.Delay − spread =

1 2π

[2.63]

2.5. Propagation modeling

The development of telecommunications services requires a good knowledge of the propagation of waves ensuring the transmission of information, whether this be sound, electromagnetic, radioelectric or light. The constantly growing needs of telecommunications require having a propagation model in ever more diverse conditions: environments, frequency range, bandwidth, etc. The total propagation loss (A) includes, in addition to the free space loss (A0), an additional loss As which reflects the influence of many environmental factors

The Propagation of Optical and Radio Electromagnetic Waves

147

causing loss (gas, hydrometeors, etc.), mask effect due to obstacles (buildings, walls, partitions, furniture, people, vegetation, etc.) or variability due to interference. In practice, it is also necessary to consider the losses in the feeder lines of the antennas, and more generally of all the devices which are inserted between the transmitters or receivers and the antennas. There are different types of models: deterministic, empirical and semi-empirical models. Deterministic models rely on the fundamental laws of physics. They serve as reference models. The computing time is relatively high, however. Empirical models are based on the analysis of a large number of experimental measurements according to different parameters such as the frequency, distance and height of the antennas. They are robust, fast and do not require geographic databases. They are suitable for sizing systems but fairly imprecise at short distances. Semi-empirical models combine an analytical formulation of physical phenomena (reflection, transmission, diffraction, scattering) and statistical adjustment using experimental measurements. They are fast, precise and robust. On the other hand, they require consideration of the environment (troposphere, geographic databases – topography, land use, morphology, building contours, street axis, etc.). We will develop below tropospheric propagation, both line-of-sight and in non-line-of-sight, the propagation of radioelectric waves in rural, suburban and urban areas, the propagation of radioelectric waves inside buildings and the propagation of radioelectric waves in broadband and ultra-wideband contexts. There are many applications: fixed links (FH, WIMAX, WIFI, etc.), mobile links (GSM, UMTS, 3G, 4G, 5G, etc.), ULB links (UWB) very high speed short range etc. 2.5.1. Tropospheric propagation

The Earth’s atmosphere is the gaseous envelope which surrounds the Earth, and which participates with it in its different movements. The troposphere is the lowest atmospheric layer. It is characterized by a regular decrease in temperature depending on the altitude, approximately -5 to -6°C on average every 1,000 meters. It is in the troposphere that most weather phenomena occur, including the formation of clouds. The upper limit of the troposphere ranges from 8 kilometers (at the pole) to

148

Electromagnetic Waves 1

18 kilometers above sea level (at the equator) depending on geographic latitude, seasons and weather conditions. This is the tropopause where the temperature varies from 190 K at the equator to 220 K at the poles. It slows upward convection movements and constitutes an upper limit for clouds (except cumulonimbus). 2.5.1.1. Line-of-sight radioelectric propagation

The presence of the Earth and the atmosphere brings into play different physical mechanisms (reflection, refraction, diffraction, diffusion) which modify the propagation conditions and influence the level of the received field, even if both ends of the link are in radioelectric line-of-sight. After defining the notion of radioelectric visibility, we will examine the different physical mechanisms encountered (attenuation (gas, hydrometeors – rain, fog, cloud, hail), reflection on the ground, refraction in the atmosphere, diffraction, etc.). A link is considered to be in radioelectric line-of-sight if the first Fresnel ellipsoid delimiting the space domain where almost all of the energy passes are not engaged. Diffraction phenomena by possible obstacles located beyond the first Fresnel ellipsoid therefore have a negligible influence on the level received. With the radius of the ellipsoid being inversely proportional to the frequency, it is necessary to raise the antennas more at lower frequencies. 2.5.1.1.1. Attenuation in the atmosphere Attenuation by gases

Attenuation by gases results from the molecular resonance of oxygen and water vapor. The oxygen molecule has a permanent magnetic moment. Its coupling with the magnetic field of an incident electromagnetic wave causes absorption by resonance at certain frequencies. Around 60 GHz corresponds, in particular, to a coupling between the intrinsic moment of the electron (spin) and the rotational energy of the molecule, which generates a series of absorption lines fairly close to each other in the spectrum. The water vapor molecule behaves like an electric dipole. Its interaction with an incident wave disorients the molecule by generating additional internal potential energy. The maximum attenuation reached around 22 GHz results from the resonance of the water molecule; it begins to rotate on itself absorbing a large proportion of the incident electromagnetic energy.

The Propagation of Optical and Radio Electromagnetic Waves

149

Figure 2.12. Specific attenuation (dB/km) due to atmospheric gases (O2 and H2O) and total (ITU-R P.676)

Figure 2.12 shows the dry air (Dry), water vapor only with a density of 7.5 g/m3 (water vapor), and total (Total) specific attenuation from 1 to 350 GHz at sea-level for the mean annual global reference atmosphere given ITU-R P.676. A very accurate way to estimate the attenuation by gases is to consider the contribution of all the absorption lines of oxygen and water vapor and the continuous absorption spectrum linked to water and ice. Different models exist in the literature ITU-R P.676 (Liebe 1983, 1985; Salonen 1990). The reference model is that of Liebe, the MPM93 model (Liebe 1983). It calculates the refractive index linked to oxygen and water vapor in the atmosphere, as well as the attenuation linked to each of these components, for frequencies up to 1,000 GHz (Liebe 1983, 1985, 1989 and 1993). The input parameters of this model are pressure, temperature, relative humidity measured on a vertical profile of the Earth’s atmosphere, as well as the frequency (COST 255 1999). Numerical application: the linear attenuation due to atmospheric gases is, for an average atmosphere (7.5 g/m3), approximately 0.2 dB/km and 15 dB/km respectively at 20 and 60 GHz.

150

Electromagnetic Waves 1

Attenuation by hydrometeors

Attenuation due to rain is particularly related to the knowledge of precipitation intensities. The specific attenuation γr (dB/km) is obtained from the precipitation intensity R (mm/h), according to the following mathematical equation: γr = kRα. The coefficients k and α depend on the frequency and polarization (see ITU-R P.837). For an intensity of 20 mm/h (value exceeded for 0.1% of the time in Belfort, for example), the orders of magnitude of the attenuations due to rain are 2 and 8 dB/km respectively at 20 and 60 GHz. For an intensity of 40 mm/h, value exceeded for 0.01 of time, the values are 3.2 and 13 dB/km. Recommendation ITU-R P.837 provides a model for determining the rain intensity Rp, which is exceeded for a given percentage p of the average year and at a given location, as well as examples of global rain distribution maps (mm/h) exceeded for 0.01% of the average year. The data files were established on the basis of data collected over fifteen years by the European Centre for Medium-Range Weather Forecasts (ECMWF). Figure 2.13 shows the change in specific loss (dB/km) due to rain.

Figure 2.13. Specific attenuation (dB/km) due to rain as a function of the frequency (ITU-R P.837)

The Propagation of Optical and Radio Electromagnetic Waves

151

A number of models exist in the literature. The most cited names are: ITU-R, Bryant, Crane, DAH (Dissanayake-Alnutt-Haidara), Garcia, Karasawa, Leitao-Watson, Matricciani, SAM, Sviatogor, Assis-Einluft, Misme-Waldteufel, etc. (COST 255 1999). Reflection on the ground

Reflection occurs when the wave encounters a surface with large dimensions (Ney 2004) and has small irregularities compared to the wavelength. The reflected field is linked to the incident field via Fresnel equations (Ney 2004). A distinction is made between specular reflection and diffuse reflection (Figures 2.14a and 2.14b).

a)

b) Figure 2.14. a) Representation of specular reflection; b) representation of diffuse reflection

152

Electromagnetic Waves 1

Specular reflection Specular reflection, a phenomenon common to all frequencies, is due to a perfectly flat homogeneous surface. It is caused by obstacles such as the ground, building facades and flat surfaces. The propagation attenuation induced by such reflections follows from Fresnel relations and depends on the dielectrics of the reflecting surface (conductivity σ, relative permittivity εr or its complex relative permittivity ε‘r = εr - j60σλ). The relative magnetic permeability is always close to 1. Figure 2.15 gives an example of the variation of the coefficients (real part and modulus) of reflection and transmission in vertical (hard) and horizontal (soft) polarization of wet soil at 1 GHz. Wet soil at this frequency is characterized by a relative permittivity equal to 30 and a conductivity equal to 0.18 (S/m). On the ground at low incidence, that is to say for very small angles of inclination (angle of incidence close to 90°), the reflection factor is always close to -1; the reflection occurs with phase inversion whatever the polarization (Boithias 1988). In horizontal polarization, the reflection factor remains close to -1 for fairly large angles of inclination. In vertical polarization, on the contrary, it decreases to a minimum, which is smaller when the frequency is high (Brewster incidence), then increases beyond (Figure 2.15b). When the angle of inclination reaches 90° (normal incidence), the two polarizations are equivalent (Boithias 1988).

Figure 2.15a. Example of the variation of the real part of reflection and transmission coefficients of wet soil at 1 GHz in vertical (hard) and horizontal (soft) polarizations

The Propagation of Optical and Radio Electromagnetic Waves

153

Figure 2.15b. Example of the variation of the modulus of the reflection and transmission coefficients of wet soil at 1 GHz in vertical (hard) and horizontal (soft) polarizations

Diffuse reflection Diffuse reflection is due to reflections from surfaces that are not flat but rough; surfaces with uneven height at different points. As a result, an incident wave is no longer reflected in a single direction but is broadcast in multiple directions. In order to specify whether a reflection is diffuse or specular, the Rayleigh criterion is generally used, namely the consideration of the height of the surface irregularities (H) and the angle of inclination (i). A height H irregularity will then create, for two waves reflected by the surface, at most a difference in path δ = 2Hsin(i) and therefore a phase difference ΔΦ = 4πHsin(i)/λ (Figure 2.16). Incident waves

Reflected waves

Irregularity i

H

Figure 2.16. Difference in path created by a surface irregularity with height H

154

Electromagnetic Waves 1

When the height H is small enough for these two waves to be in phase, this concerns the previous case of specular reflection. Otherwise the surface is considered to be rough. In summary, the reflection is diffuse, according to Rayleigh’s criterion, when ΔΦ > π/2 so when H > λ/8sin(i). The roughness therefore depends on the frequency, the angle of incidence and the height of the irregularities. It is possible to calculate the power reflected by a rough surface by multiplying the specular reflection coefficient for each of the horizontal H and vertical V polarizations by a diffusion coefficient ρ:

RVmod , H = RV , H .ρ

[2.64]

with: 2

ρ=

σ  −8π 2  h  cos 2 θ  λ  e

[2.65]

where: – σh is the standard deviation of the height distribution of the irregularities; – θ is the angle of incidence with respect to the normal. The modeling of the reflection on the ground (two rays)

In communications systems (fixed or mobile connections), the distance between the transmitter and the receiver is generally a few tens of kilometers. The earth is therefore assumed to be flat. The two-ray propagation model based on geometric optics (Figure 2.17) considers the combination of the direct ray and the ray reflected on the ground. The received signal results from the interference of two signals having traveled different paths. Depending on the relative phase of these, the field received can be maximum or minimum.

Figure 2.17. Two-line model

The Propagation of Optical and Radio Electromagnetic Waves

155

The received field (Etotal) is the sum of the direct ray and the ray reflected on the ground:

(

Etotal ( d ) = Ed ( d ) . 1 + R.e − j Δϕ

)

[2.66]

where: – Ed(d) is the free-space field at the receiver; – R is the reflection coefficient; – Δϕ is the phase difference between both paths. Transmitting and receiving antennas are assumed to be not very directive. If ht and hr are respectively the heights of the transmitting and receiving antennas and d the distance between the transmitter and the receiver, the path difference in between the two rays, based on geometric considerations is according to the image method: Δd = d1 − ( d 2 + d 3 )

[2.67]

so: Δd =

( ht + hr )2 + d 2 − ( ht − hr )2 + d 2

[2.68]

Since the distance d is large with respect to the antennas, the path difference is written according to the Taylor series approximation: Δd =

2 × ht × hr d

[2.69]

whereby: Δϕ =



λ

Δd =

4π ht hr λ d

[2.70]

For large values of d ( d  ht hr ), and with R # -1, Δφ is small, giving: Etotal ( d ) ≈ Ed ( d ) Δϕ = Ed ( d )

4π ht hr λ d

[2.71]

156

Electromagnetic Waves 1

The received power in free space was: Pr ( d ) = Gt Gr

λ2

( 4π d )2

Pt

[2.72]

This therefore becomes: 2

hh λ2  4π ht hr  Pr ( d ) =  P = t 4r Gt Gr Pt  Gt Gr 2 t d  λ d  ( 4π d )

[2.73]

The power received is thus, at long distance, inversely proportional to d4, that is a decrease of 40 dB per decade, a much faster decrease than that received in free space. It will also be noted that the power received and the attenuation become independent of the frequency. The attenuation, expressed in dB, is therefore:

Aff = −10log10 Gt − 10log10 Gr − 20log10 ht − ... ...20log10 hr + 40log10 d

[2.74]

This situation, where the direct ray and the reflected ray have slightly different paths, must therefore be avoided. In order to overcome the interference between the two signals, it is a good idea to place the receiving antenna so that the reflected ray is masked by an obstacle (Figure 2.18).

Figure 2.18. Diagram showing the blocking of the reflected ray with an obstacle

The amplitude of the field received depends on the roughness of the soil. For a maritime connection, it is advisable to limit the effect of the sea which has a strong

The Propagation of Optical and Radio Electromagnetic Waves

157

reflectance, when forming the connection, where possible, so that the reflecting point is located on an island which has a weaker reflectance (Figure 2.19).

Figure 2.19. Diagram showing the path reflected on an island to limit the effect of the reflected path on a maritime link

Refraction in the atmosphere The refractive index

In radioelectricity, the troposphere is considered to be a dielectric with a refractive index close to 1, but whose variations, although small, play an important role. The refractive index n is given by:

n = ε r μr

[2.75]

where: – εr is the relative dielectric constant; – μr is the relative permeability. The average value of the refractive index n, at ground level, varies around 1.0003. Since variations only appear at the fifth and sixth decimals, we use the refractivity N which gives a practical value of the refractive index n. These two indices are linked by the following equation (ITU-R P.834):

N = ( n − 1)106

[2.76]

158

Electromagnetic Waves 1

The refractivity can be obtained either by measuring it directly using a refractometer, or by calculating it from meteorological data using the following equation: N = 77.6

P e + 3.73 × 105 2 T T

[2.77]

where: – T is the absolute temperature in K; – P is the atmospheric pressure in hectopascals (or mb); – e is the partial pressure of water vapor in hectopascals, with: e=

Hes 100

[2.78]

where: – H is the relative humidity of air (quantity of water vapor contained in the air as a percentage compared to the maximum quantity that this air could contain at the same temperature); – es is the saturation vapor pressure. It is linked to the air temperature t (° C) by the following expression (ITU-R P.453):

 bt  es = a exp   t +c

[2.79]

The values of coefficients a, b and c for liquid water are a = 6.1121, b = 17.502 and c = 240.97. These are applicable between − 20° C and + 50° C with an accuracy of +/− 0.2%. The first term for the expression of N as a function of pressure and temperature is the dry component; the second term, depending on humidity and temperature, is the wet component. The dry component is the strongest component, contributing 60 to 80% of the index value. Graphs give the value of the dry and wet components according to the different meteorological parameters (Boithias 1983). In summer, the wet component tends to increase and the dry component tends to decrease. In winter, the wet component is weak while the dry component tends to increase due to the low temperatures.

The Propagation of Optical and Radio Electromagnetic Waves

159

As pressure, temperature and humidity vary with altitude, the air index also varies with distance and altitude. These variations depend essentially on climatic phenomena such as subsidence, night-time radiation, or even the nature of the soil (presence of water on the soil). The variability with the distance is particularly strong on mixed paths (land-sea) where islands are traversed. Vertical variability, generally the only consideration, is very important in propagation. Radioelectric wave trajectories The path along which radioelectric energy travels is called a ray. The propagation of waves in the troposphere is mainly a function of the value of the refractive index and the index gradient. In a continuous medium (a medium where the refractive index n(h) varies continuously with altitude), this law is written (Descartes law): n ( h ) cos (ϕ ( h ) ) = Cste

[2.80]

where: – ϕ (h) is the angle between the ray and the horizontal, at altitude h; – Cste is a constant; with:

ϕ (h) =

π 2

− θ ( h ) (Figure 2.20)

Figure 2.20. Geometries associated with Descartes law

[2.81]

160

Electromagnetic Waves 1

When the stratification is spherical, it is necessary to modify this relation. The application of Descartes law to a medium with spherical geometry is called Bouguer’s law. For a continuous medium, we have the following (Boithias 1983): n ( h ) r ( h ) cos (ϕ ( h ) ) = Cste

[2.82]

where: – ϕ (h) is the angle between the ray and the local horizontal at altitude h; – r(h) is equal to (a + h) where a is an arbitrary reference taken with respect to the spherical center of symmetry. For example, if the center of the Earth is taken as the center of symmetry, a will have the value of the Earth’s radius (approximately 6,370 km). The radius of curvature

A radioelectric ray crossing the troposphere undergoes curvatures due to the vertical gradient of the refractive index. The radius of curvature at a point in space is then contained in the vertical plane and is expressed in the form (ITU-R P.453):

1

ρ

=−

cos ϕ dn n dh

[2.83]

where ϕ is the angle of the ray trajectory with the horizontal. The radius of curvature is defined as being positive when its concavity is oriented towards the surface of the Earth. This phenomenon practically does not depend on frequency, if the gradient of the index does not vary significantly over a distance equal to the wavelength. If the antennas are near the ground, we have cos ϕ = 1 and since n = 1, we can write:

1

ρ

=−

dn 1 dN = dh 106 dh

[2.84]

We then see that the path curvature is proportional to the refractivity gradient and if it is constant, the trajectories are arcs of a circle. In particular, for a standard atmosphere characterized by a vertical gradient, equal to - 39 N units/km (normal refractivity gradient), the radius of curvature is

The Propagation of Optical and Radio Electromagnetic Waves

161

25,640 km, or about four times the radius of curvature of the Earth. It is a conventional value of the vertical coefficient gradient used for refraction studies. It corresponds approximately to the median value of the gradient over the first kilometer altitude in temperate regions. If the algebraic value of the coefficient gradient is greater than – 39 N units/km, we say that there is infra-refraction. In particular if the gradient is zero, the atmosphere is linear, the paths are straight lines. If the algebraic value of the coefficient gradient is less than – 39 N units/km, we say that there is super-refraction. The paths are more curved. For a gradient of – 157 N units/km, the radius of curvature of the paths is equal to that of the Earth, and the radius is therefore parallel to the surface of the Earth. If, however, the gradient is less than – 157 N units/km, the curvature of the paths is greater than the terrestrial curvature. The rays return to the ground where they are generally reflected. This is known as duct propagation. The energy of radioelectric waves remains confined and propagates with a much lower attenuation than in a homogeneous atmosphere. This is guided propagation (Figure 2.21). There are two main types of ducts: surface ducts (the lower limit is on the ground) and high ducts (ITU-R P.453). They are characterized by their thickness (difference in altitude between the limit, lower and upper surfaces), their height (height above the ground of the lower surface of the higher duct) and intensity (difference between the maximum and minimum values of the modulus of the refractive index).

Figure 2.21. Paths of radioelectric waves as a function of refractivity gradient

162

Electromagnetic Waves 1

Particular meteorological or geographical conditions lead to refractivity gradient values that deviate notably from the standard value. Thus, temporary temperature inversions in the atmosphere cause the radioelectric beams to deflect upwards and thus lead to communication disruptions. These phenomena sometimes appear in winter on television networks. In order to account for refraction, numerical methods of ray tracing in the Earth’s atmosphere generally use an equivalent Earth ray. This is the radius of a fictitious, spherical and atmosphere-free earth so that the radioelectric paths are rectilinear. The altitudes and the distances along the ground are the same as on the real Earth surrounded by an atmosphere whose vertical refractivity gradient is constant. For an atmosphere with a normal refractivity gradient, the equivalent terrestrial radius is approximately equal to 4/3 of the real radius of the Earth, which corresponds to approximately 8,500 km. The multiplicative factor of the terrestrial radius (ratio of the terrestrial radius equivalent to the real radius of the Earth) is linked to the vertical gradient dn/dh of the refractive index and to the terrestrial radius of the Earth a by the relation:

k=

1 dn 1+ a dh

[2.85]

Numerical methods (parabolic equation methods, integral equation methods, etc.) allow the electromagnetic field to be vertically assessed at any point according to the profiles of the refractive indices (Levy 2000). 2.5.1.2. Non-line-of-sight radioelectric propagation

A link is considered to be non-line-of-sight radioelectric if the first Fresnel ellipsoid delimiting the space domain, where almost all of the energy passes, is far from being released. Diffraction phenomena by possible obstacles, located in the vicinity of the link, therefore have a significant influence on the level received. These conditions are always met when one end of the link is beyond the horizon of the other. They can also be carried out below the horizon when the dimensions of the Fresnel ellipsoid are large, particularly in decametric waves and in longer waves. The physical mechanisms allowing electromagnetic waves to bypass obstacles formed by the relief and the curvature of the Earth are: – diffraction around the supposedly spherical surface of the Earth; – diffraction by the vertex of relatively thin edges;

The Propagation of Optical and Radio Electromagnetic Waves

163

– diffusion by heterogeneities; – the reflection on the upper layers; – duct propagation. 2.5.1.2.1. Diffraction around the Earth’s surface

Wave diffraction around the Earth’s sphere is one of the earliest known propagation difficulties and is known as ground wave propagation. Following the work of mathematicians such as Poincaré, Sommerfeld, Van der Pol, Bremmer, etc., the general expression of the radio-electric field is given by the following equation (Boithias 1998): E = E0

n =∞

 A (d ) g n

n =1

n

( h1 ) g n ( h2 )

[2.86]

where: – E is the field at point; – E0 is the field in free space at the same distance; – d is the distance between the transmitter and the receiver measured along the large circle; – h1 and h2 are the heights of the antennas above the terrestrial sphere; – An (d) and gn (h) are complex functions of the distance and height of each antenna, respectively. They also depend on the characteristics of the soil, the frequency and the polarization. 2.5.1.2.2. Diffraction by the vertex of relatively thin edges

Diffraction occurs when a wave meets the edge of an obstacle (mountain, hill, buildings, etc.) whose dimensions are large with respect to wavelength. It is one of the most important factors intervening in the propagation of radioelectric waves. The use of geometric theory of diffraction (GTD) (McNamara et al. 1990) makes it possible to represent this phenomenon in the form of rays. The theory shows that the additional attenuation (besides free space) of diffraction (given by GTD or uniform theory of diffraction (UTD)) has a frequency dependence in 10 log (f) with regard to diffraction by an edge. It is present for the propagation of waves in the frequency bands up to a few GHz. Beyond this, and especially for frequencies above 15 GHz, the diffraction loss can become considerable compared to a simple reflection loss.

164

Electromagnetic Waves 1

To be able to evaluate an order of magnitude of the diffraction attenuation in the frequency bands that interest us, let us consider an edge without thickness at the top at the height h (positive or negative) compared to the line that joins the transmitter to the receiver. Here, d is the total distance and d1 and d2 are the respective distances from the edge to the transmitter and to the receiver (Figure 2.22).

h E

R d2

d1 d

Figure 2.22. Representation of a sharp diffracting edge

If we take as a variable:

ν =h

2 1 1   +  d2 

[2.87]

λ  d1

the field at the receiver is given in amplitude and in phase, relative to the free space, by the following expression: ∞

t2

jπ E 1 = e 2 dt E0 1 + j

 υ

[2.88]

where E0 is the field existing in the absence of an edge. The ratio of the corresponding powers is then written: P 1  1  1  =  − ξ (ν )  +  − η (ν )  P0 2  2 2     2

2

 

[2.89]

The Propagation of Optical and Radio Electromagnetic Waves

165

with x(n) and m(n) being Fresnel integrals: ν



ξ (ν ) = cos 0

ν



μ (ν ) = sin 0

π t2 2

πt2 2

dt

dt

If v is negative, that is when the vertex of the edge is below the line connecting the transmitter to the receiver, P/P0 tends to oscillate towards the free space level, whereas for positive v, P/P0 decreases regularly as the obstruction of the edge increases. For zero v, the transmitter and the receiver are aligned with the top of the edge and the attenuation is 6 dB (in optics we have visibility while in radio we lose 6 dB). In the case of the obstruction, we have approximate expressions (Boithias 1983): 10 log

P = −13 − 20 logν P0

[2.90]

equation valid particularly for n > 1.5: 10 log

P 2   = −6.9 + 20 log  (ν − 0.1) + 1 −ν + 0.1 P0  

[2.91]

more particularly valid for n > -0,7 and usable in the vicinity of v = 0. Figure 2.23 gives the level of attenuation as a function of the height of the edge, relative to the transmitter-receiver axis. In the literature, there are several other models that describe diffraction phenomena. The most common models are those of Bullington, Longley-Rice, Deygout, etc. These are models that have been greatly inspired by the work of Van Der Pol, Bremmer and Norton. In addition, these models are continuously evolving in order to get as close as possible to reality (model with several edges, etc.).

166

Electromagnetic Waves 1

Figure 2.23. Attenuation due to diffraction off an edge

2.5.1.2.3. Diffraction due to heterogeneities

The real atmosphere is not homogeneous. It is in perpetual motion. Its refractive index presents significant spatiotemporal variations. In fact, it can undergo very rapid fluctuations and small amplitudes at each point, linked to the swirling movements of air particles. It may also contain non-gaseous particles such as raindrops, hailstones, dust, etc. These different heterogeneities present in the Earth’s atmosphere will allow non-line-of-sight propagation of electromagnetic waves by diffusion. We distinguish more particularly the tropospheric diffusion and the diffusion by rain.

The Propagation of Optical and Radio Electromagnetic Waves

167

Tropospheric scattering

Tropospheric diffusion is linked to fluctuations in the refractive index. The propagation mechanism of an electromagnetic wave by tropospheric scattering is the following (Figure 2.24). The heterogeneities of the refractive index located in the volume common to the antenna beams, receiving energy from the transmitting antenna, return a small part of it in all directions and in particular towards the receiving antenna. As these heterogeneities fluctuate over time, the level of energy received undergoes the same fluctuations. The study of the energy received therefore has two stages, the study of the average level received on the one hand, the study of fluctuations about this average level on the other.

Figure 2.24. Propagation of an electromagnetic wave by tropospheric scattering

The average level received is mainly related to the average values of the index gradient in the volume common to the antenna beams. It is given by the following empirical relation: A = 30 log10 ( f ) + 30 log10 ( d ) + 1.5Gc + 102

[2.92]

where: – A is the attenuation between isotropic antennas; – d is the distance in km; – f is the frequency in MHz; – Gc is the gradient of the refractive index in a common volume (N units/km). The value of Gc is generally negative. The rapid fluctuations respect Rayleigh’s law.

168

Electromagnetic Waves 1

Figure 2.25 gives an example of tropospheric scattering observed on a 105 km link on the plain of Alsace at 468, 915 and 2,205 MHz (Blanchard 1999).

Figure 2.25. Example of variation in the radioelectric field due to tropospheric scattering

Rainscatter

Contrary to tropospheric scattering due to the permanent presence of heterogeneities of the refractive index within the atmosphere, scattering by rain only appears when it rains in the common volume of antenna beams. If the diameter of the raindrops is relatively small compared to the wavelength, the scattering cross section of a raindrop (ratio of the power scattered to the surface power of the incident wave) is proportional to the square of the volume of the particle. It is given by Rayleigh’s equation (Boithias 1983): 2

6  ε − 1  Di   ε + 2  λ4

σi = π 5  where:

– ε is the permittivity of water;

[2.93]

The Propagation of Optical and Radio Electromagnetic Waves

169

– Di is the diameter of the raindrop; – λ is the wavelength. The presence of the term λ 4 corresponds to a frequency selectivity (the blue color of the sky results from the scattering of white light by air molecules). The total effective scattering cross section of all the drops contained in the unit volume V is: N

σd =

 i =1

N iσ i π 5  ε − 1  = 4  V λ ε +2

2 N

 i =1

Ni Di6 V

[2.94]

It is therefore proportional to: N

D

6 i

[2.95]

i =1

By defining the radar reflectivity factor Z by the relation: Z=

1 V

N

N D i

6 i

[2.96]

i =1

as a result, the total scattering cross section becomes: 2

σd =

π 5  ε −1    Z λ4  ε + 2 

[2.97]

The radar reflectivity factor Z is linked to the rain intensity R by the following relation:

Z = aRb

[2.98]

The coefficients a and b depend on the frequency and the polarization (ITU-R P.837). The reader will find in recommendation ITU-R P.837 models of rain intensity Rp exceeded for a given percentage of the average year, p, and at a given geographical location. 2

 ε −1  The ratio   , in the case of rain, is almost independent of the frequency, ε +2 although the real and imaginary parts of ε vary greatly for frequencies above

170

Electromagnetic Waves 1

104 GHz. For low frequencies and around 100 GHz, we will take it to be equal to 0.93. For ice, on the other hand, this does not exceed 0.2 (Boithias 1983). The power received by scattering on a rain volume V located respectively at distances dt and dr from the transmitting and receiving antennas, and outside the direct path, is: 2

Pr

Gt Gr

4

3

dV 2 2 dt d r

[2.99]

Reflection on the upper layers Reflection on the upper layers of the atmosphere acts as a signal repeater. These layers are not necessarily present throughout the link and the signal received depends on their angle of incidence and their surface condition. A small variation in these layers, both in surface condition and in position (altitude, inclination, etc.), can lead to large variations in the level of the received signal (Blanchard 1999). Figure 2.26 gives an example of variations in the received signal, observed on a 105 km link on the Alsace plain at 468, 915 and 2205 MHz in the presence of reflection phenomenon on the layers of the atmosphere (Blanchard 1999).

Figure 2.26. Example of variation in the radioelectric field due to reflection on layers of the atmosphere

The Propagation of Optical and Radio Electromagnetic Waves

171

Duct propagation

When the gradient of the refractive index is less than –157 N units/km, the paths of the rays are more curved than the terrestrial surface. The area of the atmosphere in which these super refractive conditions exist is called the ducting layer. These layers have significant effects on the line-of-sight and cross-horizontal links. Indeed, in the presence of a duct, the notion of a radioelectric horizon no longer has any precise meaning because points located beyond the horizon can be reached. In addition, the level of the signal received during such a phenomenon can reach or even exceed the level in free space (Vilar et al. 1988; Shen 1995; Rana et al. 1993; Blanchard 1999). Ducting layers are therefore one of the main causes of interference between services using the same frequency range. If the ducting layer is located low enough and the ground is sufficiently reflective, there will be a duct on the ground. On the other hand, if the layer is located high up, the paths of the rays are curved successively towards the Earth and towards space. The ray is therefore trapped between two altitudes and if it does not touch the ground, we speak of a high altitude or high duct. The ducting layers mean that the rays from the transmitting antenna can cross at certain points in space. Thus, interference zones appear where the rays from the multiple paths intersect and zones where hardly any rays pass (the signal level is low) are known as radioelectric holes. The boundary between these two areas constitutes a causticity along which the level is very high. As the conditions of refraction vary over time, a point in space can be found alternately in one or the other of these regions. This results in sudden fluctuations in the received signal. The thickness of a duct rarely exceeds a few hundred meters, but on the other hand a duct can extend over several hundred kilometers, especially above coastal areas or very humid areas. On the surface of the sea there can be an evaporation duct whose thickness is around a dozen meters, but it is present for a large percentage of time. Figure 2.27 gives an example of variations in the received signal observed on a 105-kilometer link on the Alsace plain at 468, 915 and 2205 MHz in the presence of atmospheric duct (Blanchard 1999).

172

Electromagnetic Waves 1

Figure 2.27. Example of variation in radioelectric field due to the presence of ducts

2.5.2. Propagation in rural, suburban and urban areas The demand for low, medium and high-speed communications via the air has led manufacturers and operators to develop and deploy new technologies, for example GSM (Global System for Mobile Communications), UMTS (Universal Mobile Telecommunication Systems) and WIMAX (Worldwide Interoperability for Microwaves Access). GSM, after RADIOCOM 2000, is the second-generation standard for mobile networks. It allows maximum bit rates of 9.6 kbit/s. It operates at 900 and 1,800 MHz. The access technique is based on a combination of TDMA time division and FDMA frequency division. It thus allows low volume voice and digital data transmissions (SMS, MMS). UMTS is the 3rd generation standard for mobile networks. It is based on the W-CDMA multiple access technique, a so-called spread spectrum technique. The frequencies allocated for UMTS are 1,885–2,025 MHz and 2,110–2,200 MHz. The

The Propagation of Optical and Radio Electromagnetic Waves

173

bit rate is different depending on the place of use: 144 kbits/s in rural areas (up to 500 km/h), 384 kbits/s in urban areas (up to 120 km/h) and 2 Mbits/s in a building. It allows multimedia content such as images, sounds and video. WIMAX is a new radio access technology, based on a family of IEEE 802.16 standards, defining broadband links via the air and ensuring a high level of interoperability between different devices. Spectral efficiency is around 3 bits/s/Hz with the most efficient modulation. More efficient than WiFi, the objective of WIMAX is to provide high bit rate links (voice, data, video on demand) (over several tens of Mbits/s) over wireless networks even several tens of kilometers in radius. It thus allows wireless links between a base station (Base Transceiver Station, denoted BTS) and thousands of subscribers (Subscriber Station, denoted SS) through broadband “air” interfaces. Then emerged 4th generation and 5th generation technology (4G and 5G) and associated objects. In addition to voice and internet access, it responds to use cases. There are many applications: health, smart city, agriculture, factory of the future, connected car. Such systems operate at distances and at frequencies less than those used in microwave radio links. Variations in the refractive index of the atmosphere are negligible. Only the surrounding environment (buildings, vegetation, etc.) is considered. The dimensioning of such networks requires the development of specific propagation models in different environments (rural, suburban and urban and inside buildings, etc.). 2.5.2.1. Geographic databases

Predicting the propagation channel characteristics is based on knowledge of the environment described in geographic databases. They contain information concerning topography (relief), land use (wood, road, buildings, etc.), morphology, street axes, etc. These different geographic databases result from processes using satellite (SPOT, HELIOS, etc.) or aerial photographs coupled with complex digitization processes. Figures 2.28 and 2.29 give examples of the topography in the Perpignan region on the one hand and of the outlines of buildings in the city of Belfort on the other hand.

174

Electromagnetic Waves 1

Figure 2.28. Map of the topography (relief) in the Perpignan region, France

Figure 2.29. Map of the topography (relief) in the Belfort region, France

The Propagation of Optical and Radio Electromagnetic Waves

175

2.5.2.2. Propagation models 2.5.2.2.1. The rural model

The most widely used attenuation model in the macrocellular environment is the OKUMURA-HATA model (Okumura et al. 1968; Hata 1980). Attenuation is given by the following equation:

Ap = 69.55 + 26.16 log10 f − 13.82 log10 hb + ...

... + ( 44.9 − 6.55log10 hb ) log10 d − a ( hm )

[2.100]

with: – for small and medium-sized cities: a ( hm ) = (1.1log10 f − 0.7 ) hm − (1.56 log10 f − 0.8 )

[2.101]

– for big cities and f ≤ 200 MHz: a ( hm ) = 8.29 ( log10 (1.54hm ) ) − 1.1 2

[2.102]

– for big cities and f ≥ 400 MHz: a ( hm ) = 3.2 ( log10 (11.75hm ) ) − 4.97 2

[2.103]

where: – hb is the height of the base station; – hm is the mobile height. This formulation of the attenuation is the result of measurements made near Tokyo. On the other hand, deviations have been noted when it is applied in cities whose characteristics are very different from this particular city (COST 231 1999). The OKUMURA-HATA model for small and medium-sized cities has been extended to the 1,500–2,000 MHz frequency band as part of the COST 231 project: the model COST231-HATA: Ap = 46.3 + 33.9 log10 f − 13.82 log10 hb + ... ... + ( 44.9 − 6.55log10 hb ) log10 d − a ( hm ) + Cm

[2.104]

176

Electromagnetic Waves 1

where: – a(hm) is identical to the expression defined above; – Cm = 0 dB in small and medium cities as well as in urban areas; – Cm = 3dB in large cities. Its validity field is described by the following parameters: – frequency range: 500–1,500 MHz, with possible extension to 2,000 MHz (COST 231 1999); – height of base stations varying between 30 and 200 m in height; – height of reception antennas between 1 and 10 m in height; – distance varying between 1 and 20 km. However, this model is not suitable for lower base station antennas and mountainous or wooded environments. In order to overcome these various drawbacks, the following model has been proposed (Erceg 1999). It applies to the following environments: – type A terrain: mountainous terrain covered with medium and high-density forests. It is characterized by a strong attenuation; – type B terrain: intermediate environment between type A and type C; – type C terrain: flat with low vegetation cover. For a very small distance d0, the median of the propagation loss is given by the following equation:  d  L = A + 10γ log10   + s  d0 

d > d0

where:

 4π d  – A = 20log10  ;  λ  – λ is the wavelength; – γ is an attenuation coefficient; – d0 = 100; – s is a variable representing shadowing effects.

[2.105]

The Propagation of Optical and Radio Electromagnetic Waves

177

Term A can also be written in logarithmic form: A = 32.4 + 20 log10 f + 20 log10 d

[2.106]

where: – f is the frequency in MHz; – d is the distance in km. The coefficient γ is given by the equation: 

γ =  a − b.hb + 

c   10 m < hb < 100 m hb 

[2.107]

where hb is the height of the base station. The values of coefficients a, b and c are given in Table 2.2. Coefficient

Type A

Type B

Type C

a

4.6

4

3.6

b

0.0075

0.0065

0.005

c

12.6

17.1

20

Table 2.2. Values of coefficients A, B and C

The variable s, characterizing the shadowing effects, follows a normal log distribution. Typical values of standard deviation range from 8.2 to 10.6 dB, depending on the density of the vegetation (Erceg 1999). This model is applied more particularly for frequencies around two gigahertz and reception antenna heights around two meters. Corrective terms are introduced in the attenuation equation in order to extend its validity field to other frequencies, and to receiving antenna heights between two and ten meters. The median of the propagation loss is given by the following equation:

Lmodified = L + ΔL f + ΔLh where: – L is the attenuation given in the previous expression;

[2.108]

178

Electromagnetic Waves 1

– ΔLf is the corrective term due to the frequency; – ΔLh is the corrective term due to the height of the reception antenna. The frequency correction term is given by the following equation (Jakes and Reudink 1967; Chu and Greenstein 1999):

 f  ΔL f = 6log10    2000 

[2.109]

where f is the frequency in MHz. The corrective term due to the height of the receiving antenna is given by the following equation:

h ΔLh = 10.8log10   for type A and B terrain 2

[2.110]

h ΔLh = −20log10   for type C terrain 2

[2.111]

where h is the antenna height between 2 and 10 meters. 2.5.2.2.2. Suburban and urban models

In addition to the OKUMURA-HATA model written above, two models were chosen more specifically to characterize the channel propagation in urban and suburban areas. The first, the ECC-33 (Electronic Communication Committee) model, was developed by the CEPT (The European Conference of Postal and Telecommunications Administrations). It applies more particularly in the range of frequencies 3.4 to 3.8 GHz (Electronic Communication Committee 2003). Not using geographic databases, it finds a more particular application in the dimensioning of a network. The second, the Walfish-Ikegami model, was developed as part of the COST 231 action (COST 231 1999). It is a semi-empirical model adapted to the context of small urban and suburban cells (coverage radius of a few kilometers, antennas above roof level). It is more suitable for GSM (900 MHz) and DCS (1,800 MHz) engineering with an emission between 5 and 15 meters above roof level. The

The Propagation of Optical and Radio Electromagnetic Waves

179

propagation mainly takes place above roofs to finally plunge into the street where the mobile moves (Figure 2.30). It takes into account the free space loss, the loss related to multiple edge diffraction and the loss related to the last diffraction. The ECC-33 model

The propagation loss is described by the following equation: PL = A fs + Abm − Gb − Gr

[2.112]

where: – Afs is the free space loss; – Abm is the median propagation loss; – Gb is the height gain factor of the base station antenna; – Gr is the height gain factor of the CPE terminal antenna. These different parameters are defined as follows:

A fs = 92.4 + 20 log10 ( d ) + 20 log10 ( f )

{

 h  2 Gb = log10  b  13.958 + 5.8 log10 d   200 

[2.113]

}

Gr =  42.57 + 13.7 log10 ( f )  log10 ( hr ) − 0.585

[2.114] [2.115]

where: – f is the frequency of the electromagnetic wave (GHz); – d is the distance between the base station and the terminal station (km); – hb is the height of the base station (m); – hr is the height of the terminal station (m). Walfish-Ikegami model

Propagation attenuation is given by the following equation:

Lb = L0 + Lrts + Lmsd

[2.116]

180

Electromagnetic Waves 1

where: – L0 is the free space loss; – Lrts is the attenuation due to diffraction on the last edge; – Lmsd is the attenuation due to multiple edge diffraction. Figure 2.30 gives a schematic representation of the “transmitter-receiver” profile and a definition of the different parameters used in the model.

Figure 2.30. Schematic representation of the “transmitter-receiver” profile

Free space loss L0 is given by the fundamental equation of telecommunications: L0 = 32.4 + 20 log10 d km + 20 log10 f MHz

[2.117]

The loss associated with the last diffraction is: when hmobile < hroof: Lrts = −16.9 − 10 log10 ( wm ) + 10 log10 ( f MHz ) +...

... + 20 log10 ( Δhm ) + Lori Lrts = 0

[2.118]

if Lrts < 0

where: – Lori = −10 + 0.354ϕ degree ; 0 ≤ ϕ degree ≤ 35

(

)

– Lori = 2.5 + 0.075 ϕdegree − 35 ; 35 ≤ ϕdegree ≤ 55

[2.119] [2.120]

The Propagation of Optical and Radio Electromagnetic Waves

(

)

181

– Lori = 4.0 + 0.114 ϕdegree − 55 ; 55 ≤ ϕ degree ≤ 90

[2.121]

– Δhmobile = hroof − hmobile

[2.122]

– wm is the street width (m); – f Mhz is the wave frequency (MHz); – ϕ degree is the angle (in °) between the street axis and the direction of the incident wave (Figure 2.31). Loss due to multiple diffraction on the roofs: Lmsd = Lbeh + ka + k d log10 d km + k f log10 f MHz − 9 log10 bm

Lmsd = 0

[2.123]

if Lmsd < 0

where: – Lbeh = 18 log10 (1 + Δhbase )

if hbase > hroof ;

– Lbeh = 0

if hbase ≤ hroof ;

– ka = 54

if hbase > hroof ;

– ka = 54 − 0.8Δhbase

if d km ≥ 0.5 and hbase ≤ hroof ;

– ka = 54 − 0.8Δhbase – kd = 18 – kd = 18 − 15

d km 0.5

if d km < 0.5 and hbase ≤ hroof ; if hbase > hroof ;

Δhbase hroof

if hbase ≤ hroof ;

 f  – k f = −4 + 0.7  MHz − 1 for an average city and a suburban area (vegetation  925  with average density);  f  – k f = −4 + 1.5  MHz − 1 for dense urban areas; 925   – bm(m) is the separation between buildings.

182

Electromagnetic Waves 1

Note that Δhbase = hbase − hroof (the different parameters here are in meters).

Figure 2.31. Definition of the angle between the street axis and the direction of the incidence angle

Its field of validity is described by the following parameters: – frequency range: 800–2,000 MHz; – base station height varying between 4 and 50 meters; – reception antenna height between 1 and 3 meters; – distance varying between 20 and 5 kilometers. This is consistent with experimental measurements in urban and suburban environments characterized by a uniform height of buildings (the standard deviation between measurements and the projection is around 6 dB). In addition, it agrees with the previous model in the case of type C terrain (plain with low vegetation cover). It thus allows continuity between the two models. A corrective term considers the height of the receiving antenna. This model can be used in both urban and suburban environments. Radioelectric engineering

Carried out using specific tools, radioelectric engineering involves determining the characteristics of channel propagation considering the different parameters in the presence of the actual environment characterized by a geographic database (topography, morphology, contours of buildings, street axis, etc).

The Propagation of Optical and Radio Electromagnetic Waves

183

These are computer-assisted cellular network planning tools. They provide the user with the means to design, study and optimize radioelectric engineering. In particular, they predict the field received from various transmitters using a geographic database and validated propagation models on a set of measurements in the field. They also make it possible to analyze the interference caused by the reuse of frequency. Figure 2.32 gives an example of a “transceiver” profile.

Figure 2.32. Example of a “transceiver” profile

Figure 2.33 gives an example of radioelectric coverage.

Figure 2.33. Example of urban coverage

184

Electromagnetic Waves 1

2.5.3. Propagation within buildings

A distinction is made between the penetration loss in buildings on the one hand and the propagation loss inside buildings on the other hand. 2.5.3.1. Penetration models

Penetration attenuation in a building is defined as the loss of power experienced by the electromagnetic field between the outside around the building and one or more positions inside the building. It is calculated by comparing the external field and the field in the rooms of the building where the receiving mobile is located. The parameters affecting the penetration attenuation values are multiple and their effects mostly intermingle. Among these many parameters, the following conventional ones are generally distinguished: the surrounding environment; the reception depth in buildings; the angle of incidence; the reception height, more commonly called the “floor effect”; the transmitter-receiver distance; height of transmitting antenna; frequency; type of material traversed; etc. (Sizun 2003). The most classic models are inspired by the Motley Keenan model (Motley and Keenan 1998) used in propagation inside buildings. They predict penetration attenuation based on parameters such as: – the distance between the transmitter and the outside wall of the building where the receiver is located; – the distance between the exterior wall and the receiver; – the number of internal walls along the emitter-receiver profile; – the floor effect; – the loss of energy off the exterior wall of the building; – the loss of energy off the internal walls. The propagation loss (L) is expressed as a sum of the losses in free space (L0), losses due to obstacles crossing the direct ray (slabs, walls, doors, windows), of a constant (Lc) (Motley and Keenan 1998). The database can differentiate between the various obstacles associated with a particular attenuation value. This is the most used model: N

L = L0 + Lc +

N L j

j =1

j

+ N f Lf

[2.124]

The Propagation of Optical and Radio Electromagnetic Waves

185

where: – Nj is the number of type j walls crossed; – Lj are the losses due to type j walls; – N is the number of different wall types; – Nf is the number of slabs crossed; – Lf are the losses per slab. Typical values of losses as a function of materials (exterior walls) in the 1–2 GHz frequency band are summarized in Table 2.3. Materials

Loss (dB)

Porous concrete

6.5

Reinforced glass

8.0

Concrete (30 cm)

9.5

Wall made of thick concrete (25 cm) with large windows

11.0

Wall made of thick concrete (25 cm) without glass

1.0

Thick wall (> 20 cm)

15

Slab

23

Table 2.3. Transmission losses of different construction materials (exterior walls) in the 1–2 GHz band

2.5.3.2. Models inside buildings 2.5.3.2.1. Geographic databases

The characteristics of the propagation channel are predicted based on knowledge of the indoor environment generally described in the form of facets. Several types of materials can be considered: load-bearing walls, partitions, slabs, doors, windows, etc. Each of them is characterized by its dielectric parameters (permittivity, permeability) and its thickness.

186

Electromagnetic Waves 1

Figure 2.34. Example of a representation of a residential environment

The propagation of radioelectric waves inside buildings essentially depends on the nature of the environment (closed offices, open offices, station or airport halls, corridors, residences, etc.). It is characterized by the presence of numerous routes (multi-paths); the predominant propagation mechanisms are reflection, transmission, diffraction and diffusion. Many models, both statistical and deterministic, for characterizing propagation loss exist in the literature. We detail below only the statistical models which do not require detailed building databases. Particular emphasis is placed on the following models: Motley-Keenan, ITU-R, COST 231, COST 259, MWF, IEEE P802.11. 2.5.3.2.2. Motley-Keenan model

The propagation loss (L), like the penetration loss inside buildings, is expressed by a sum of the losses in free space (L0), losses due to obstacles crossing the direct ray (slabs, walls, doors, windows), of a constant (Lc) (Motley and Keenan 1998). The database can differentiate between the various obstacles associated with a particular attenuation value. This is the most used model: N

L = L0 + Lc +

N L j

j

+ N f Lf

j =1

where: – Nj is the number of type j walls crossed; – Lj losses due to type j walls;

[2.125]

The Propagation of Optical and Radio Electromagnetic Waves

187

– N is the number of different wall types; – Nf is the number of slabs crossed; – Lf are the losses per slab. Typical values for losses by materials (exterior walls) in the 1–2 GHz frequency band are summarized in Table 2.4 (COST 231 1999). Materials Plasterboard Wood Window Brick wall less than 14 cm thick Wall made of concrete less than 10 cm thick Thick wall (> 20 cm) Slab Metal wall

Losses (dB) 3 3 2 4 13.0 17 23 30

Table 2.4. Transmission losses of different construction materials (interior walls in the 1–2 GHz band)

2.5.3.2.3. ITU-R model

Described in Recommendation ITU-R P.1238, the total propagation loss is written as follows:

Ltotal = 20log10 f + N log10 d + L f ( n ) − 28

[2.126]

where: – N is the distance power loss coefficient; – f is the frequency (MHz); – d is the distance (m) separating the base station from the terminal receiver (d > 1 m); – Lf is the floor penetration loss factor (dB); – n is the number of stages between the base station and the receiver (n ≥ 1). Tables 2.5 and 2.6 give some examples of N and floor penetration loss factor in an office and commercial environment for different values of the frequency.

188

Electromagnetic Waves 1

Frequency

Offices

Commercial buildings

900 MHz

33

20

1.2–1.3 GHz

32

22

1.8–2 GHz

30

22

4 GHz

28

22

5.2 GHz

31



Table 2.5. Distance power loss coefficient

Frequency

Offices

Commercial buildings

900 MHz

9 (1 floor) 19 (2 floors) 24 (3 floors)

9 (1 floor) 19 (2 floors) 24 (3 floors)

1.8–2 GHz

15 + 4 (n – 1)

6 + 3 (n – 1)

5.2 GHz

16 (1 floor)

16 (1 floor)

Table 2.6. Floor penetration loss factor (n ≥ 1)

2.5.3.2.4. COST 231 models

The European project COST 231 (EURO-COST-231 1999) developed three empirical models: – linear attenuation model; – one-slope model; – multi-wall model. Linear attenuation model

The additional free space loss depends linearly on the transceiver distance: L = LFS + α d

[2.127]

where: – α is the attenuation coefficient (dB per meter); – LFS is the loss of free space between the transmitter and the receiver (dB).

The Propagation of Optical and Radio Electromagnetic Waves

189

One-slope model

The one-slope model considers a linear dependence between the attenuation and the logarithm of the transmitter-receiver distance: L = L0 + 10 n log10 ( d ) in dB

[2.128]

where: – L0 is the attenuation when d=1 m; – n is the power loss coefficient; – d is the transceiver distance (m). The value of the power attenuation coefficient n depends on the environment. Multi-wall model

The multi-wall model considers both the free space attenuation and the attenuation linked to the crossing of walls and floors by the direct path. As the attenuation due to the crossing of floors is not linear to the number of floors, an empirical factor b has been introduced into the expression of the attenuation: I

L = LFS + Lc +



 k f +2  −b    k +1  k wi Lwi + k f f Lf

[2.129]

j =1

where: – LFS is the loss of free space between the transmitter and the receiver (dB); – Lc is the attenuation constant (dB); – kwi is the number of type i walls crossed; – kf is the number of floors crossed; – Lwi is the attenuation due to the crossing of type i walls (dB); – Lf is the attenuation associated with crossing a floor (dB); – b is an empirical parameter; – I is the number of wall types.

190

Electromagnetic Waves 1

Two types of walls are available: – light walls (Lw1), which are not load-bearing walls (plasterboard, chipboard, etc.) or thin walls whose thickness is less than ten centimeters (light concrete wall); – heavy walls (Lw2), such as load-bearing walls or walls whose thickness is more than ten centimeters (concrete, brick, etc.). Tables 2.7a and 2.7b give the values of the different parameters of the models described above. They were obtained from 1,800 MHz measurements in four types of buildings (dense, open, wide and corridor). Building

Linear model

One-slope model

α

L0 (dB)

n

Dense



33.3

4

1 floor

0.62

33.3

4

2 floors



21.9

5.2

Multi-floor

2.8

44.9

5.4

Open

0.22

42.7

1.9

Wide



37.5

2

Corridor



39.2

1.4

a) Building

Multi-wall model Lw1 (dB)

Lw2 (dB)

Lf (dB)

b

Dense









1 floor

3.4

6.9

18.3

0.46

2 floors









Multi-floor









Open

3.4

6.9

18.3

0.46

Wide

3.4

6.9

18.3

0.46

Corridor

3.4

6.9

18.3

0.46

b) Table 2.7. a) Coefficients of the linear model and one slope model obtained from measurements at 1,800 MHz; b) coefficients of the multi-wall model obtained from measurements at 1,800 MHz

The Propagation of Optical and Radio Electromagnetic Waves

191

2.5.3.2.5. COST 259 model

The COST 259 model (COST 259 2000) is an improved version of the multiwall COST 231 model: I

L = LFS +



 k wi +1.5   kwi +1 − bwi    k wi Lwi

[2.130]

i =1

This model does not consider the path loss between floors. It is only valid for attenuation calculations on the same floor. The term bwi depends on Lwi per the following equation: bwi = −0.064 + 0.0705 Lwi − 0.0018 L2wi

Table 2.8 gives the parameters of the multi-wall model at 5 GHz. Materials

Lw1 (dB)

Lw2 (dB)

Plasterboard

3.4

0.15

Mixed walls (plaster, concrete, glass)

8.4

0.4

Concrete

11.8

0.52

Table 2.8. Penetration loss and non-linear parameter at 5 GHz

2.5.3.2.6. Multi-Wall and Floor (MWF) model

This model, proposed by Lott et al. (Lott and Forkel 2001), considers the linear non-dependence between the total attenuation and the number of walls or floors crossed in the same category. It takes into account the number of floors crossed. It is written in the following form: LMWF = L0 + 10n log10 ( d ) +

l

K wi



J

Lwik +

i =1 k =1

where: – L0 is the loss at a distance of 1 m (dB); – n is the power loss coefficient;

Kfj

 L j =1 k =1

fjk

[2.131]

192

Electromagnetic Waves 1

– d is the transceiver distance (m); – Lwik is the attenuation due to the crossing of kth type i wall (dB); – Lfjk is the attenuation due to the crossing of kth type j floor (dB); – l is the number of wall types; – J is the number of floor types; – Kwi is the number of type i walls crossed (dB); – Kfj is the number of type j floors crossed (dB). The attenuation coefficient n has values between n = 1.96 and n = 2.03. Table 2.9 gives the values of the MWF model parameters in the case of concrete walls. Type of material

Thickness

K=1

K=2

10 cm

Lw11 = 16

Lw12 = 14

20 cm

Lw21 = 29

Lw22 = 24

Dry concrete

24 cm

Lw21 = 35

Lw22 = 29

Porous concrete

24 cm

Lw31 = 4

Lw32 = 26

Concrete

Table 2.9. Parameters of the MWF model in the case of concrete at 5.2 GHz

2.5.3.2.7. The IEEE P802.11 model

The IEEE 802.11 Task Group n has developed different models, more particularly suited to domestic and small office environments, defined according to the spread of impulse response delays. (A-E model) (Erceg 2004). The propagation loss depends on the transmitter-receiver distance relative to a distance dBP (breakpoint distance): L ( d ) = LFS ( d )

d ≤ d BP

 d  L ( d ) = LFS ( d BP ) + 35log10    d BP 

d > d BP

[2.132]

The Propagation of Optical and Radio Electromagnetic Waves

193

where: – d is the transmitter-receiver distance (m); – LFS is the free space loss. The value of the distance dBP varies from one model to another. Tables 2.10 and 2.11 give, for each model, each environment, the spread of the delays and the value of the distance dBP (Table 2.10) as well as the standard deviations of shadowing effects in LOS (d < dBP) and NLOS (d > dBP) (Table 2.11). Model

Environment

Delays (ns)

dBP (m)

A

1 path

0

5

B

Residential

15

5

C

Small offices

30

5

D

Typical offices

50

10

E

Large offices

100

20

F

Wide spaces

150

30

Table 2.10. Values for delay and distance dBP according to the different types of environment

Model

Environment

σ: LOS

σ: NLOS

A

1 path

3

4

B

Residential

3

4

C

Small offices

3

5

D

Typical offices

3

5

E

Large offices

3

6

F

Wide spaces

3

6

Table 2.11. Values of the standard deviations of the shadowing according to the different types of environment (σ is the standard deviation)

Comparing the different models at 2.4 and 5 GHz shows that the MotleyKeenan, Multiwall (COST 231 and 259) and IUT-R models give similar results. The COST 231 one-slope model is more pessimistic. However, it appears that the model proposed by the ITU-R is the most robust. It is based on an nlogd+c type equation, where n and c are parameters resulting from numerous measurements carried out in many environments.

194

Electromagnetic Waves 1

2.5.3.2.8. Radioelectric engineering

Based on a 3D description of the environment, this is based on methods of ray launching and ray tracing. The ray launching technique consists of launching a set of rays from the transmitter in all directions and searching for the set of rays that reach the receiver, after having considered all the physical phenomena that occur during their propagation: reflection, diffraction, penetration or crossing of vegetation, etc. The ray tracing technique is based on the determination of the different rays that travel through the space between a transmitter and a receiver, using the optical image method. Fresnel relations and the uniform theory of diffraction (UTD) are, respectively, implemented during the different reflections and reflections. These techniques make it possible to predict the field, to determine the different rays which traverse the space between a transmitter and a receiver, to calculate the impulse response and the directions of the incoming and outgoing rays of the propagation channel. Figure 2.35 gives an example of the coverage of the radioelectric field in a residential environment.

Figure 2.35. Example of radioelectric coverage in a residential environment

The Propagation of Optical and Radio Electromagnetic Waves

195

2.5.3.2.9. Furniture effects

Based on measurements made at 5.8 GHz, Cuinas and Sanchez (Cuinas and Sanchez 2004) have demonstrated the impact of furniture on attenuation. The basic equation used is an exponentially decreasing function: k ( dB ) = a ( dB ) + 20 n log10 ( d )

[2.133]

where: – d is the distance between the transmitter and the receiver (m); – n is the power loss coefficient; – a is a constant; – k(dB) is the attenuation. The values of parameters a and n deduced from the different experiments are summarized in Table 2.12. Attenuation increases more quickly with distance in a furnished room than in an empty room. Environment

a(dB)

n

Empty room

+ 46.02

+ 0.14

Furnished room

+ 37.72

+ 0.80

Square furnished room (same surface)

+ 37.72

+ 0.58

Large furnished room

+ 37.72

+ 1.05

Table 2.12. Values of parameters a and n in different environment configurations

The validity range of these equations extends more particularly to a distance of 4.5 to 7 meters, the range of distances considered during the experiment carried out. 2.5.3.2.10. Effects of people

From the distributions of measured signal levels at 2.4 GHz, empirical relationships have been deduced (Klepal et al. 2004). They describe the average attenuation, the standard deviations and the probability of having a line-of-sight link between the transmitter and the receiver.

196

Electromagnetic Waves 1

The average additional loss compared to free space due to the movement of people (dB), the standard deviation and the probability of having a line-of-sight link are given respectively by the following equations:

μ s ( l , ρ p ) = ( 3l ρ p )

0.7

σ s ( l , ρ p ) = log 7 ( 55l ρ p + 1) + 0.5

(

) (

A l, ρ p = 1 − ρ p

)

0.2 l

[2.134] [2.135] [2.136]

where: – l is the dimension of the area within which people move (m); – ρp is the density of people (number of people per occupied area) (m-2). 2.5.4. Broadband propagation

Due to the presence of multiple paths, the radioelectric channel propagation is frequency-selective and temporally and spatially variable due to variations in the radio environment. A broadband model represents its behavior in a given configuration (frequency, bandwidth, mobility (fixed, pedestrian, car, etc.)) and a given environment (indoor, outdoor, rural, urban, etc.). It takes into account temporal dispersion of the impulse response (multiple paths) caused by the many phenomena involved in the propagation process (reflection, transmission, diffraction, scattering, etc.). It is represented by a function representing the power delay profile (PDP) known as the impulse response (h(τ)). It is the response at time t to an impulse emitted at time t-τ. (Figure 2.8). It is typical to qualify the selectivity of the channel by parameters deduced from the average power profile of the impulse response. The most used are the average delay, the delay spread, the interval of the delays, the window of the delays and the band of coherence of the channel (Failly 1989). There are two types of models, models for simulations and models for prediction: – in the case of simulation, the channel is reproduced with its characteristics of temporal and spatial variability in a given environment from measurements, for example, to evaluate its effects before and after correction on the quality of the digital signal. The simulation models are intended to be integrated into digital transmission simulation chains with COSSAP type software (COS 1997);

The Propagation of Optical and Radio Electromagnetic Waves

197

– in the case of forecasting, a minimum number of characteristics is predicted from environmental data. Broadband predictive models are intended for engineering tools. The role of the predictive model is to predict the impulse response of the channel or, at least, of the parameters which directly influence the quality of transmission (number of paths, spread). We distinguish between path models and geometric models. 2.5.4.1. Path models

These represent the impulse response by a limited number of discrete paths in different propagation environments (RA: rural, TU and BU: urban, HT: very hilly). Each path is defined by a power relative to that of the path of higher power (relative power in dB), a delay time and a type of Doppler spectrum (Rayleigh, Gauss, Rice). The discretization of the temporal space (delay time) causes a frequency periodicity of the model. It is, however, not very usable in the case of frequency shift. Six- and twelve-path models were defined in four different environments: – a rural environment (RA), for which a dominant path emerges. It has a poorly selective channel propagation; – an urban environment of medium selectivity (UT) and high selectivity, when the link is respectively moderately and strongly obstructed (BU); – a very hilly environment (HT). Tables 2.13 and 2.14 give an example of an impulse response of six paths in an urban environment and twelve paths in a hilly environment. The DS parameter represents the standard deviation of the delay. Path number

Delay (μs)

Relative power (dB)

Doppler

DS (μs)

1

0.0

−3

Rayleigh

2.4

2

0.4

0

Rayleigh

2.4

3

1.0

−3

Gauss 1

2.4

4

1.6

−5

Gauss 1

2.4

5

5.0

−2

Gauss 2

2.4

6

6.6

−4

Gauss 2

2.4

Table 2.13. Impulse response model in an urban environment (BU)

198

Electromagnetic Waves 1

Path number

Delay (μs)

Relative power (dB)

Doppler

DS (μs)

1

0.0

− 10

Rayleigh

5.0

2

0.2

−8

Rayleigh

5.0

3

0.4

−6

Rayleigh

5.0

4

0.6

−4

Gauss 1

5.0

5

0.8

0

Gauss 1

5.0

6

2.0

0

Gauss 1

5.0

7

2.4

−4

Gauss 2

5.0

8

15.0

−8

Gauss 2

5.0

9

15.2

−9

Gauss 2

5.0

10

15.8

− 10

Gauss 2

5.0

11

17.2

− 12

Gauss 2

5.0

12

20.0

− 14

Gauss 2

5.0

Table 2.14. Impulse response model in hilly environment (HT)

Figure 2.36 represents a GSM TU channel with 12 paths.

Figure 2.36. Schematic representation of a GSM TU channel with 12 paths

2.5.4.2. Geometric models

The concept of geometric modeling is based on the relationship that there can be between angular and temporal power profiles, and the location of reflectors and/or clusters in the propagation environment. Indeed, as illustrated in Figure 2.37, the shape of the impulse response is directly related to the position of the dominant cluster, compared to the base station and the

The Propagation of Optical and Radio Electromagnetic Waves

199

mobile. A path is made up of several rays, in order to consider the notions of spatial and temporal shift. These rays are defined by a radio propagation path containing two successive bounces: one on a distant reflector or diffuser, the other on a diffuser close to the mobile (in order to obtain realistic Doppler spectra). The direct path between the transmitter and the receiver, for its part, is composed solely of rays scattered by reflectors close to the mobile (Figure 2.37).

Figure 2.37. Relations between the position of reflectors and diffusers in the propagation environment; shape of the power time profile

The modeling phase involves identifying the position of the predominant diffusers in the propagation environment, from the measured temporal and angular power profiles (spatiotemporal representation of the channel impulse response). From the delay, direction of arrival (DOA) and information gain relating to each cluster, its location relative to the base station and the mobile as well as its attenuation law (law in Ni.log10 (length_ ray i)), can be calculated. We then obtain a photograph of the propagation environment considered for the selected measured case.

200

Electromagnetic Waves 1

Figure 2.38 gives an example of the spatiotemporal representation of the complex impulse response measured during a broadband multisensor experiment in a dense environment at 2 GHz and in a small cell context (antenna above roofs) (Laspougeas et al. 2000).

a)

b)

c)

Figure 2.38. Spatiotemporal representation of the impulse response: a) angular power profile, b) temporal power profile, c) mean spatio-temporal power distribution, the origin of the angles corresponds to the pointing axis of the antenna at the base station

2.5.5. Ultra-wideband propagation

Ultra-wideband (UWB) systems use signals over a very wide frequency band (500 MHz to several GHz) in the band 3.1–10 GHz. Its broad spectral support and its strong temporal resolution power allow them to transmit at very high bit rates, up to several hundred Mbit/s. To assess their performance, attenuation and wideband models have been proposed based on radio channel measurement data.

The Propagation of Optical and Radio Electromagnetic Waves

201

2.5.5.1. Attenuation model

The propagation attenuation is given by the following equation (Recommendation ITU-R P.1791):  d  PL ( d ) = PL0 ( d 0 ) + 10n log10   + Χσ  d0 

( dB )

[2.137]

where: – PL0(d) is the propagation loss over a reference distance d0 (typically d0 = 1 m); – d is the distance from transmitter to receiver (m) (d > 1 m); – n is the power loss coefficient; – Xσ is the standard deviation of log-normal fading (dB); it translates the slow variations of the channel linked to the irregular phenomena of the shadowing effects. Attenuation PL0(d0) in dB is generally modeled using the following equation:  4π d 0 f1. f 2 PL0 ( d 0 ) = 20 log10   0.3 

   

[2.138]

where f1 (GHz) and f2 (GHz) are frequencies at − 10 dB of the UWB spectrum. In Table 2.15, we show some typical values of the attenuation coefficient and the standard deviation of the fading according to the environment and the different path types (LOS: line-of-sight; NLOS: non-line-of-sight). Environment

Residential buildings

Industrial buildings

Path type

n

Xσ (dB)

LOS

1.7

1.5

NLOS (slightly obstructed)

3.5–5

2.7–4

NLOS (strongly obstructed)

7

4

LOS

1.5

0.3–4

NLOS (slightly obstructed)

2.1–4

0.19–4

NLOS (strongly obstructed)

4–7.5

4–4.75

Table 2.15. Typical values of the attenuation coefficient and the standard deviation of fading

202

Electromagnetic Waves 1

2.5.5.2. Impulse response model

The most commonly used model is that of Saleh and Valenzuela (Salonen et al. 1990). It is based on clusters made up of a set of rays with similar properties. Each of the clusters is represented by a decay function (exponential or linear (dB)) as a function of the delay time (Figure 2.39).

Figure 2.39. Power profile according to Saleh and Valenzuela formalism

The Propagation of Optical and Radio Electromagnetic Waves

203

The impulse response h(τ) has the following general form: h (τ ) =

β

kl

exp ( jθ kl ) δ ( t − Tl − τ kl )

[2.139]

k ,l

The amplitude of a path βkl is modeled by a random variable with a Rayleigh distribution and a mean square value respecting an exponential decay:

β kl2

=

τ kl T − l − 2 Γ β( 0,0 ) e e γ

[2.140]

where: – β 2 (0,0) represents the average power of the first path of the first cluster; – Tl is the arrival time of the first cluster; – τ kl is the arrival time of the kth path in the first cluster, relative to Tl; – Γ and γ respectively determine the rate of decrease of the intercluster and intracluster power. Figure 2.39 shows a representation of the power profile according to the Saleh and Valenzuela formalism (linear (dB) and exponential (mW) representation) (Pagani 2005). The determination of an impulse response therefore requires the generation of clusters, on the one hand, and that of the different rays within each cluster on the other. 2.5.5.2.1. Generation of clusters

We must first determine the number L of clusters that constitute it. With the arrival of a new cluster being modeled by a Poisson process, the number of clusters can be generated by drawing a random variable L following Poisson’s law (Pagani 2005):

( )

  L pl ( L ) =   

L

( )

 exp − L   L!  

where L represents the mean number of clusters.

[2.141]

204

Electromagnetic Waves 1

The intercluster duration follows an exponential parameter law. The density of probability of arrival of a new cluster is given by the equation (Saleh and Valenzuela 1987): p (Tl | Tl −1 ) = Λe −Λ (Tl −Tl −1 )

[2.142]

where Λ is the cluster arrival rate. The amplitude of the different clusters follows a power decrease. As a result, the amplitude of the first ray of each cluster is given by the equation:

T  β =β  l   T1  2 1, l

−Ω

2 1,1

[2.143]

where Ω represents the intercluster power decay coefficient. The number of rays that can be generated can be infinite with levels becoming infinitely low, therefore it is necessary to choose an observation dynamic D. It will allow the elimination of clusters and the highly attenuated rays. In practice the value of parameter D should not exceed the value of 50 dB. The different clusters can therefore be generated as follows (Pagani 2005): 1) initialization: the arrival time of the 1st cluster is linked to the transmitterreceiver distance d: l = 1 and T1 = d/c

[2.144]

where c is the speed of light. Let us arbitrarily set the amplitude of this first ray to β11 = 1; 2) generation of a new cluster: to determine the intercluster duration, let us take a random variable ΔTl according to an exponential parameter Λ law:

l = l +1

[2.145]

T l = T l-1 +ΔTl

[2.146]

T  β1,l =  l   T1 



Ω 2

[2.147]

The Propagation of Optical and Radio Electromagnetic Waves

205

3) stopping criteria: to validate the last cluster, its amplitude must remain within the observation dynamic. So we check the condition:

 β k ,l   > −D  β1,1 

20 log10 

[2.148]

so:

τ k ,l

Ω  D −G  − ω T     l 10ω < Tl 10   − 1  T     1  

[2.149]

2.5.5.2.2. Generation of rays

Within each cluster, the arrival of a ray is modeled by a Poisson process. As in the case of clusters, the density of probability of a new ray is written (Saleh and Valenzuela 1987):

(

)

p τ kl | τ k −1,l = λ e

(

− λ τ kl −τ ( k −1)l

)

[2.150]

where λ is the ray arrival rate in each cluster. Thus, the generation of the rays inside each of the clusters can be determined in a similar way to that of the clusters. The amplitude of the rays inside each cluster follows a power decay of parameter ω. To consider the power difference observed between the first path of each cluster and the following paths, we use the power ratio G in dB. The different rays inside each cluster can therefore be generated as follows (Pagani 2005): 1) initialization: the arrival time of the 1st ray corresponds to that calculated for the cluster: k = 1 and τ 1,l = 0 The amplitude β1,l was previously calculated;

[2.151]

206

Electromagnetic Waves 1

2) generation of a new ray: the inter-ray duration is given by a random variable Δτ k ,l generated according to an exponential law of parameter λ, so:

k = k +1

τ k ,l = τ k −1,l + Δτ k ,l

β k ,l

−G = 10 20

τ +T  β1,l  k ,l l   Tl 



ω 2

[2.152]

3) stopping criteria: to validate the last ray, its amplitude must remain within the observation dynamics. So we check the condition:  β k ,l 20 log10   β1,1 

  > −D  

[2.153]

so:

τ k ,l

 D −G  < Tl 10 10ω  

 Tl     T1 



Ω

ω

  − 1  

[2.154]

In the event of a stoppage, only the first k-1 rays will be kept (Kl = k – 1). An example of model parameter values (Laspougeas et al. 2002) is presented in Table 2.16. LOS Cluster Ray

LOS

NLOS

Λ (MHz)



Λ (MHz)



36.5

4.4

24.9

3.9

Λ (MHz)

ω

Λ (MHz)

ω

5.95

11.1

6.19

10.2

Table 2.16. Example of parameter values of the impulse response model

NLOS

The Propagation of Optical and Radio Electromagnetic Waves

207

The models used for standardization are based on this principle. The improvements relate mainly to the shape of the clusters, the statistical laws of the cluster arrival times and the rays inside the clusters. Other models exist in the literature. Let us quote, for example, the path models (COST 207 1989), models with directional paths (Erceg et al. 2004; Baum et al. 2005), TRSI-BRAN (BRAIN 2000), 802.11 (Naftali 1997; Jahlavan and Levesque 2005), etc. The standard 802.15.4a (IEEE 802.15) deals with low speed but large range WPAN (up to industrial environments). The 802.15.3a standard (IEEE 802.15) deals with very high bit rate and short range WPAN (a few meters). The 802.15.4 low bit rate model is based on the approach of Saleh and Valenzuela (1987). The impulse response has been improved by Molish et al. (2004). The 802.15.3 high bit rate model also based on the Saleh and Valenzuela approach has been improved by Foerster et al. (2002). The fading law retained for each path of the model is a normal log law and not a Rayleigh law. 2.6. The propagation of visible and infrared waves in the Earth’s atmosphere 2.6.1. Introduction

Telecommunications operators are faced with an ever-increasing demand for greater volumes of information to be transmitted (voice, data, images). The increase in frequency of the systems used is an advantage because it offers higher bandwidths and thus allow higher bit rates. The use of Free Space Optic (FSO) networks, in the range of visible and infrared wavelengths, thus constitute a mode of wireless transmission at high bit rates (several hundreds of Mbits/s), at short and medium range (from a few tens of meters to a few kilometers). The main applications are wireless telephony, data transmission, computer networks and high definition television. Several factors condition the revival of this technology: the ease and speed of deployment, the lack of regulation, the low cost of the equipment and the bit rates offered (2 Mbits/s to 10 Gbits/s) (Bouchet et al. 2006).

208

Electromagnetic Waves 1

This technology uses low power laser beams ensuring little impact on the environment. These laser beams involve the transmission of an optical signal (visible or infrared) through the Earth’s atmosphere. They interact with the different components (molecules, aerosols) of the propagation medium. This interaction is at the origin of a large number of phenomena such as absorption, diffusion, scintillation. Its only limitation is heavy fog and can cover distances up to a few kilometers (five kilometers in clear air). It is therefore suitable for the construction of networks connecting nearby buildings. One of the challenges still to overcome is gaining better knowledge of the effects of the atmosphere on the propagation in this frequency spectrum, in order to better optimize the synthesis of broadband wireless communication systems and to evaluate their performance. It is a prerequisite for equipment testing. This aspect will be more specifically described here. Atmospheric effects relating to propagation, such as molecular and aerosol absorption and diffusion, scintillations due to the variation in the air index under the effect of temperature variations, attenuation by hydrometeors (rain, snow, fog) and lithometeors (dust, sand, etc.) as well as their different models (Kruse and Kim, Bataille, Al Naboulsi, Carbonneau, etc.), are presented and assessed alongside experimental results. The Meteorological Optical Range (MOR), a parameter used to characterize the transparency of the atmosphere, is defined. Different measuring instruments such as the transmissometer and the scatterometer are also described. Some potential applications are finally mentioned. 2.6.2. The propagation of light in the atmosphere

The characteristic performances of atmospheric optical data transmission networks depend on the medium, the Earth’s atmosphere, in which they propagate. This, due to its composition, interacts with the light beam (visible or infrared): molecular and aerosol absorption and diffusion by hydrometeors (rain, snow, fog, etc.), by lithometeors (dust, sand, etc.), and scintillation due to the variation in the air index under the effect of temperature variations. Atmospheric attenuation is the result of an additive effect of absorption and scattering of light in the visible and infrared bands (IR) by gas molecules and

The Propagation of Optical and Radio Electromagnetic Waves

209

aerosols in the atmosphere. It is described by Beer’s law, giving the transmittance as a function of the distance:

τ (d ) =

P (d ) P ( 0)

= e −σ d

[2.155]

where: – τ(d) is the transmittance at distance d from the transmitter; – P(d) is the signal power at distance d from the transmitter; – P(0) is the power transmitted; – σ is the attenuation or the extinction coefficient per unit length. The attenuation is linked to the transmittance by the following expression:

 1  Aff dB ( d ) = 10 log10   τ ( d )   

[2.156]

The extinction coefficient σ is the sum of the four following terms:

σ = α m + α n + βm + βn

[2.157]

where: – αm is the molecular absorption coefficient (N2, O2, H2, H2O, CO2, O3, etc.), the reader should refer to the structure and composition of the atmosphere; – αn is the absorption coefficient by aerosols (fine solid or liquid particles present in the atmosphere – ice, dust, smoke, etc.); – βm is the Rayleigh scattering coefficient resulting from the interaction of light with particles smaller than the wavelength; – βn is the Mie scattering coefficient, which appears when the particles encountered are of the same order of magnitude as the wavelength of the transmitted wave. Absorption dominates in the infrared, whereas it is the scattering which is predominant in the visible and the ultraviolet spectrum.

210

Electromagnetic Waves 1

2.6.2.1. Molecular absorption

Molecular absorption results from the interaction between the radiation and the atoms and the molecules of the medium (N2, O2, H2, H2O, CO2, O3, Ar, etc.). It defines different transmission windows in the visible and infrared domain (Figure 2.40).

Figure 2.40. Transmittance of the atmosphere due to molecular absorption

2.6.2.2. Molecular scattering

Molecular scattering results from the interaction of light with particles smaller than the wavelength. An approximate value of βm(λ) is given by the following equations:

βm ( λ ) = Aλ −4 A = 1.09 ×10−3

[2.158] P T0 (km-1μm4) P0 T

where: – P (mbar) is the atmospheric pressure and P0 = 1,013 mbar; – T (K) is the atmospheric temperature T0 = 273.15 K.

[2.159]

The Propagation of Optical and Radio Electromagnetic Waves

211

As a result, this scattering is negligible in the infrared. Rayleigh scattering mainly concerns the UV range up to the visible range of the spectrum. This is responsible for the blue color of a clear sky. 2.6.2.3. Aerosol absorption

Aerosol absorption results from the interaction between radiation and aerosols, fine particles suspended in the atmosphere (ice, dust, grains of sand, smoke, fog). The absorption coefficient αn is given by the following equation: ∞

 ( πλ

α n ( λ ) = 105 Qa

2 r

)

, n" π r 2

0

dN ( r ) dr

dr

[2.160]

where: – αn(λ) is the absorption coefficient by aerosols (km-1); – λ is the wavelength (μm); – dN(r)/dr is the size distribution of particles per unit volume (in cm-4); – n’’ is the imaginary part of index n of the considered aerosol; – r is the particle radius (cm); – Qa (2πr/λ, n’’) is the absorption cross section for a given type of aerosol. The Mie scattering theory (Mie 2008) allows the electromagnetic field diffracted by homogeneous spherical particles to be determined. It makes it possible to evaluate the two physical variables, which are the normalized absorption cross section Qa and the normalized scattering cross section Qd. They depend on the size of the particles, their refractive index and the wavelength of the incident radiation. They represent the section of an incident wave normalized by the geometric cross section of the particle (πr2), such that the absorbed (scattered) power is equal to the power passing through this section. The refractive index of aerosols depends on their chemical composition. It is complex and depends on the wavelength, denoted n = n’ + n’’ where n’ is related to the scattering power of the particle and n’’ relates to the absorbing power of this same molecule. Note that in the visible and near infrared range, the imaginary part of the refractive index is extremely small and can be disregarded in the calculation of the overall attenuation (extinction). In the far infrared, however, this is not the case.

212

Electromagnetic Waves 1

2.6.2.4. Aerosol scattering

This results from the interaction of light with particles (aerosols, hydrometeors, lithometeors) of the same order of magnitude as the wavelength. It is mainly due to the haze and mists in the considered wavelength range. The scattering coefficient βn is given by the following equation: ∞

 ( πλ , n ) π r

β n ( λ ) = 105 Qd

2 r

'

0

2

dN ( r ) dr

dr

[2.161]

where: – βn(λ) is the aerosol scattering coefficient (km-1); – λ is the wavelength (μm); – dN(r)/dr is the particle size distribution per unit volume (cm-4); – n’ is the real part of index n of the aerosol considered; – r is the particle radius (cm); – Qd (2πr/k)λ, n’’) is the scattering cross section for a given type of aerosol. The particle size distribution is generally represented by an analytical function such as the lognormal distribution for aerosols and the modified Gamma distribution for fog (Kruse et al. 1962; Bataille 1992; Kim, McArthur and Korevaar 2001; Al Naboulsi, Sizun and De Fornel 2003). The latter is widely used to model the different types of fog and clouds. It is given by the following equation (Shettle and Fenn 1979; Deirmendjian 1969):

N ( r ) = arα exp ( −br )

[2.162]

where: – N(r) is the number of particles per unit volume and whose radius is between r and r + dr; – α, a and b are parameters that characterize the particle size distribution. Atmospheric transmission calculation software such as FASCOD, LOWTRAN and MODTRAN consider two particular types of fog: thick advection fog and convection or moderate radiation fog, which are modeled by the modified Gamma

The Propagation of Optical and Radio Electromagnetic Waves

213

size distribution. The typical parameters are given in Table 2.17 (Clarke 1968; Shettle 1989). α

A

b

N

W

rm

V

Advection fog

3

0.027

0.3

20

0.37

10

130

Radiation fog

6

607.5

3

200

0.02

2

450

Table 2.17. The different parameters characterizing the particle size distribution in the case of thick advection fog and radiation fog

In the table: – N is the total number of water particles per unit volume (nb/cm3); – rm is the modal radius for which the distribution has a maximum (μm); – W is the liquid water content (g/m3); – V is the visibility associated with the type of fog (m). The Mie scattering theory allows us to express the scattering coefficient Qd due to aerosols. It is calculated by assuming that the particles are spherical and sufficiently distant from each other so that the field scattered by a particle and arriving at another can be calculated in the far field. The scattering cross section Qd is a function which is highly dependent on the size of the aerosol compared to the wavelength. It reaches its maximum (3.8) by a particle radius equal to the wavelength: the scattering is then maximal. Then, when the size of the particles increases, it stabilizes around a value equal to 2. We must therefore expect a very selective function by particles with a radius less than or equal to the wavelength. Clearly, scattering is highly dependent on the wavelength. The concentration of aerosols, their composition and their size distributions vary greatly over time and in space, hence the difficulty in predicting the attenuation caused by these aerosols. Although their concentration is closely related to optical visibility, there is no clear particle size distribution for a given visibility. Visibility characterizes the transparency of the atmosphere estimated by a human observer. It is measured by the meteorological optical range (MOR). The scattering coefficient is the most limiting factor from the point of view of the propagation of atmospheric optical waves. It is the most limiting factor for the

214

Electromagnetic Waves 1

deployment of atmospheric optical networks. The attenuation can reach 300 dB/km while the attenuation of millimetric waves by rain is only about 10 dB/km. Different models exist in the literature: that of Kruse and Kim, Bataille and Al Naboulsi. 2.6.3. The different models 2.6.3.1. The Kruse and Kim models

The attenuation coefficient for optical and near infrared waves up to 2.4 µm is approximated by the following equation:

γ ( λ )  βn ( λ ) =

3.912  λnm  V  550 

−q

[2.163]

where: – V is the visibility (km); – λnm is the wavelength (nm); – the coefficient q characterizes the particle distribution. It is given by the following equation (Kruse et al. 1962): 1.6  q = 1.3  1/3 0.585V

if V > 50 km if 6 km < V < 50 km

[2.164]

if V < 0.5 km

As a result, the attenuation is a decreasing function of the wavelength. Recent studies have led to the parameter q being defined as follows (Kim et al. 2001): 1.6 1.3  q = 0.16V + 0.34 V − 0.5  0

if V > 50 km if 6 km < V < 50 km if 1 km < V < 6 km if 0.5 km < V < 1 km if V < 0.5 km

where V is the visibility (km).

[2.165]

The Propagation of Optical and Radio Electromagnetic Waves

215

As a result, attenuation is a decreasing function of the wavelength when visibility is greater than 500 meters. For lower visibilities, the atmospheric attenuation is independent of the wavelength. 2.6.3.2. Bataille’s model

Bataille’s model (Bataille 1992) calculates molecular and aerosol extinction for six laser lines (0.83, 1.06, 133, 1.54, 3.82 and 10.591 μm) by a polynomial approach on ground-based terrestrial networks. We describe it below. 2.6.3.2.1. Molecular extinction

The linear extinction coefficient σm is obtained via a 10-term expression:

 B1 + B2T '+ B3 H + B4T ' H + ...    σ m = − ln  ... + B5T '2 + B6 H 2 + B7T ' H 2 + ...    2 3 3  ... + B8T ' H + B9 H + B10T ' 

[2.166]

where: – T’ = T(K)/273.15 is the reduced air temperature; – H is the absolute humidity (g/m3). The coefficients Bi (i = 1,10), for the different wavelengths studied are given in the literature (Bataille 1992; Vasseur et al. 1997). 2.6.3.2.2. Aerosol extinction

The linear extinction coefficient σn is obtained via a 10-term expression:  A1 + A2 H + A3 H 2 + A4 H x + ...    −1/2 −y −1/2 σ n = − ln  ... + A5V + A6V + A7 HV + ...     ... + A ( H / V ) y + A H z / V + A HV −1  8 9 10  

[2.167]

where: – V is the visibility (km); – H is the absolute humidity (g/m3); – x, y, and z are real values used to optimize the polynomial for each of the wavelengths studied, with their value being adjusted so that the maximum relative

216

Electromagnetic Waves 1

error between FASCOD2 and the polynomial is less than 5%. The coefficients Ai (i = 1.10), for the different waves studied, are given in the literature for two types of aerosol: rural and maritime (Bataille 1992; Cojan and Fontanella 1990). 2.6.3.3. The Al Naboulsi model

Al Naboulsi et al. (2003) developed simple relationships from FASCOD to assess the attenuation in the wavelength range 690 to 1,550 nm and visibilities ranging from 50 to 1,000 m for two types of fog: advection fog and convection fog. Advection fog occurs when warm, moist air moves over cold ground. The air in contact with the ground cools and reaches its dew point. Water vapor condensation appears. It appears, more particularly, in spring when there is movement of warm, humid air from the south over snow-covered regions. Attenuation by advection fog is expressed by the following equation:

σ advection =

0.11478λ V

[2.168]

where: – λ is the wavelength (μm); – V is the visibility. Radiation or convection fog is caused by cooling of the air mass by night radiation from the ground when conditions are favorable (very low winds, high humidity, clear sky). The soil loses its accumulated heat during the day, and becomes cold. The air cools down on contact, reaches its dew point and the humidity it contains increases. A cloud forms that touches the ground, especially in valleys. Attenuation by convection fog is expressed by the following equation:

σ convection =

0.18126λ 2 + 0.13709λ + 3.7502 V

where: – λ is the wavelength (μm); – V is the visibility.

[2.169]

The Propagation of Optical and Radio Electromagnetic Waves

217

2.6.3.4. Attenuation by rain

Attenuation by rain (dB/km) is generally given by the Carbonneau equation (Carbonneau and Wiseley 1998): Attrain = 1.076 R 0.67

[2.170]

Figure 2.41 shows variations in specific attenuation (dB/m) due to precipitation in the optical and infrared spectrum.

Specific attenuation (dBkm)

Specific attenuation due to the rain 25.00 20.00 15.00 10.00 5.00 0.00 0

20

40 60 Precipitation intensity (mm/h)

80

100

Figure 2.41. Specific attenuation (dB/km) due to rain in the optical and infrared range

Recommendation ITU-R P.837 gives the intensity of rain Rp, exceeded for a given percentage of the average year, p, and at a given location. 2.6.3.5. Attenuation by snow

Snow attenuation as a function of snowfall rate is given by the following equation:

Attsnow [ dB / km] = aS b

[2.171]

where: – Attsnow is the snow attenuation (dB/km); – S is the snowfall rate (mm/h); – a and b are functions of the wavelength given by the following equations as a function of the wavelength in nanometers (Table 2.18).

218

Electromagnetic Waves 1

A

b

Wet snow

0.0001023λnm + 3.7855466

0.72

Dry snow

0.0000542λnm + 5.4958776

1.38

Table 2.18. Values of coefficients a and b help calculate the snow attenuation (wet and dry)

The attenuations as a function of the snowfall rate at 1,550 nm are given in the Figures 2.42 and 2.43.

Figure 2.42. Wet snow: attenuation as a function of precipitation rate at 1,550 nm

Figure 2.43. Dry snow: attenuation as a function of precipitation rate at 1,550 nm

The Propagation of Optical and Radio Electromagnetic Waves

219

2.6.3.6. Scintillation

Under the influence of thermal turbulence, within the propagation medium, we witness the formation of randomly distributed cells, of variable sizes (from 10 cm to 1 km) and of different temperatures. These different cells have different refractive indices, thus causing scattering, multiple paths and variation in the angles of arrival: the received signal fluctuates quickly at frequencies between 0.01 and 200 Hz. The wave front varies in a similar way, causing beam focusing and defocusing. Such fluctuations in the signal are called scintillations. Figures 2.44 to 2.46 show this effect as well as the variations (amplitude, frequency) in the received signal. When the heterogeneities are large compared to the cross section of the beam, it is deflected (Figure 2.44); when they are small, the beam is broadened (Figure 2.45). When the heterogeneities are different sizes, large and small, scintillations occur (Figure 2.46) (Weichel 1989). The effect of tropospheric scintillation is generally studied using the logarithm of the amplitude χ [dB] of the “log-amplitude” signal observed, defined as the ratio, in decibels, of its instantaneous amplitude to its average value. The intensity and the speed of the fluctuations (frequency of scintillations) increase with wave frequency. For a plane wave, a weak turbulence and a point receiver, the “log-amplitude” scintillation variance of σχ2 [dB2] can be expressed by the following equation:

σ χ2 = 23.17k 7/6Cn2 L11/6

[2.172]

Figure 2.44. Deviation of the laser beam under the influence of turbulence cells greater than the beam diameter (deviation of the beam)

220

Electromagnetic Waves 1

Figure 2.45. Deviation of the laser beam under the influence of turbulence cells smaller than the beam diameter (beam enlargement)

Figure 2.46. Effects of different heterogeneities and different sizes on the propagation of a laser beam (scintillations)

The Propagation of Optical and Radio Electromagnetic Waves

221

where: – k is the wave number (2π/λ) (m-1); – L is the link length (m); – Cn2 is the parameter describing the structure of the refractive index, representing turbulence intensity (m-2/3). The peak to peak amplitude scintillation is 4σχ, and the attenuation linked to the scintillation is 2σχ. For strong turbulences, we observe a saturation of the variance given by the above relationship (Bataille 1992). Note that parameter Cn2 does not have the same value for millimeter waves and optical waves (Vasseur et al. 1997). Millimeter waves are especially sensitive to fluctuations in humidity while in optics, the refractive index is essentially a function of temperature (the contribution of water vapor is negligible). For millimeter waves, we obtain a value of Cn2 of around 10-13 m-2/3 which is a medium turbulence (generally 10-14 < Cn2 < 10-12 for millimeter waves) and for optical waves a value of Cn2 of around 2x10-15 m-2/3 which is weak turbulence (typically in optics 10-16 < Cn2 < 10-13) (Bataille 1992). Figure 2.47 gives the variation in the attenuation of optical beams with a wavelength of 1.5 µm for different types of turbulence over distances up to 2,000 meters.

Figure 2.47. Variation in attenuation linked to the scintillation as a function of distance for different types of turbulence at 1.55 micron

The international visibility code giving the visible losses (dB/km) for different climatic conditions can be found in Appendix 5 (Kim, McArthur, Korevaar 2001): – metrological conditions (very clear weather to dense fog); – precipitation (mm/h: drizzle, rain, thunderstorm); – visibility (from 50 km to 50 m).

222

Electromagnetic Waves 1

2.6.4. Experimental results

In this section, we present some experimental results (Figures 2.48 and 2.49) deduced from attenuation measurements according to the visibility, carried out within the framework of the COST 270 project, in collaboration with the University of Graz (Gebbart et al. 2004). 2.6.4.1. Comparison with the Kruse and Kim models (850 and 950 nm)

Figures 2.48 and 2.49 show the evolution of the specific attenuation (dB/km) measured at the Turbie site with a light beam at 850 nm and 950 nm as a function of visibility in the presence of fog. The results are compared to the Kruse model (Figure 2.48) and Kim model (Figure 2.49).

Figure 2.48a. Variation in specific attenuation at 850 nm as a function of visibility (comparison with the Kruse’s model)

The Propagation of Optical and Radio Electromagnetic Waves

Figure 2.48b. Variation in specific attenuation at 950 nm as a function of visibility (comparison with the Kruse’s model)

Specific attenuation (dB/km)

Kim’s model Measurements at 850 nm

Visibility (m) Figure 2.49a. Variation in specific attenuation at 850 nm as a function of visibility (comparison with Kim’s model)

223

224

Electromagnetic Waves 1

Specific attenuation (dB/km)

Kim’s model Measurements at 950 nm

Visibility (m)

Figure 2.49b. Variation in specific attenuation at 950 nm as a function of visibility (comparison with Kim’s model)

2.6.4.2. Comparison with the Al Naboulsi model

Atténuation spécifique (dB/km)

Figures 2.50 and 2.51 show the evolution of the specific attenuation (dB/km) of the light beam at 850 nm measured at the Turbie site as a function of visibility in the presence of fog. The results are compared to the advection and convection model of Al Naboulsi.

Figure 2.50. Variation in specific attenuation at 850 nm as a function of visibility (comparison with the Al Naboulsi advection model)

The Propagation of Optical and Radio Electromagnetic Waves

225

Figure 2.51. Variation in specific attenuation at 850 nm as a function of visibility (comparison with the Al Naboulsi convection model)

Comparing the measurements to existing models in the literature reveals a good correlation between the proposed measures and the models. From the analysis of the previous curves, it appears that the Al Naboulsi model, developed from FASCOD, is in excellent agreement with the experimental measurements for low visibilities, whereas the Kruse and Kim models deviate significantly from the measurements. 2.6.5. Fog and mist

Fog and mist consist of fine water droplets (