DSSAT User's Guide Vol. 2

  • Author / Uploaded
  • ICASA
  • 0 0 0
  • Like this paper and download? You can publish your own PDF file online for free in a few minutes! Sign Up
File loading please wait...
Citation preview

Volume 2

DSSAT version 3 Editors:

Gordon Y. Tsuji Goro Uehara Sharon Balas

International Benchmark Sites Network for Agrotechnology Transfer University of Hawaii, Honolulu, Hawaii

IBSNAT, The International Benchmark Sites Network for Agrotechnology Transfer, is a network consisting of the contractor (University of Hawaii), its subcontractors and many global collaborators. Together they have created a network of national, regional and international agricultural research for the transfer of agrotechnology among global partners in both developed and lesser developed countries. From 1982 to 1987, IBSNAT was a program of the U.S. Agency for International Development under a cost-reimbursement Contract, No. DAN-4054-C-00-207100, with the University of Hawaii. From 1987 to 1993, the contract was replaced with a Cooperative Agreement, No. DAN-4054-A-00-7081-00, between the University of Hawaii and USAID.

Correct Citation: G.Y. Tsuji, G. Uehara and S. Balas (eds.). 1994. DSSAT v3. University of Hawaii, Honolulu, Hawaii. Department of Agronomy and Soil Science College of the Tropical Agriculture and Human Resources University of Hawaii Honolulu, Hawaii 96822 Copyright ã University of Hawaii 1994

All reported opinions, conclusions and recommendations are those of the authors (contractors) and not those of the funding agency or the United States government. LIBRARY

OF

CONGRESS 94-19296

ISBN 1-886684-02-2 (VOLUME 2) ISBN 1-886684-00-6 (3 VOLUME

SET)

D S S AT

V3

VOLUME 2

VOLUME 2-1 INPUT & OUTPUT FILES VOLUME 2-2 CROP MODELS VOLUME 2-3 G R A P H I N G S I M U L AT E D E X P E R I M E N T D ATA

AND

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

iv

TABLE OF CONTENTS VOLUME 2-1.

INPUT

AND

OUTPUT FILES

1

CHAPTER ONE.

INTRODUCTION

3

CHAPTER TWO.

FILE STRUCTURE

5

FILE ANNOTATION

5

FILE NAMING CONVENTIONS

5

MISSING DATA

8

CHAPTER THREE.

INPUTS

9

EXPERIMENT LIST FILE

9

EXPERIMENT DETAILS FILE EXAMPLES

OF

FILEX

FOR

13

VARIOUS EXPERIMENTS

28

WEATHER DATA FILE

41

SOIL DATA FILE

44

GENOTYPE

48

CHAPTER FOUR. CHAPTER FIVE. CHAPTER SIX.

OUTPUTS

49

EXPERIMENT PERFORMANCE DATA FILES DISCUSSION

75

REFERENCES APPENDIX A.

73

77 WEATHER LIST

AND

SOIL PROFILE LIST FILES

79

WEATHER LIST FILE

79

SOIL PROFILE LIST FILE

80

APPENDIX B.

EXPERIMENT DETAILS CODES

81

APPENDIX C.

SIMULATED

87

APPENDIX D.

WEATHER DATA CODES

AND

FIGURE FIGURE 1. OVERVIEW OF INPUT CROP MODELS

FIELD DATA CODES

AND

OUTPUT FILES USED

93

BY

6

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

v

TABLES

TABLE 1. CROP MODEL INPUT

AND

OUTPUT FILES

10

TABLE 2. EXPERIMENT LIST FILE (FILEL = “EXP.LST”)

12

TABLE 3. EXPERIMENT DETAILS FILE (FILEX)

16

TABLE 4. SIMULATION CONTROLS

24

TABLE 5. EXAMPLE FILEX #1

29

TABLE 6. EXAMPLE FILEX #2

32

TABLE 7. EXAMPLE FILEX #3

35

TABLE 8. EXAMPLE FILEX #4

39

TABLE 9. WEATHER DATA FILE (FILEW)

42

TABLE 10. SOIL DATA FILE (FILES)

45

TABLE 11. EXAMPLE

SIMULATION OVERVIEW FILE (OUTO)

51

TABLE 12. DETAILED SIMULATION SUMMARY OUTPUT FILE (OUTS)

54

TABLE 13. DETAILED SIMULATION GROWTH OUTPUT FILE (OUTG)

58

TABLE 14. DETAILED SIMULATION CARBON BALANCE OUTPUT FILE (OUTC)

61

TABLE 15. DETAILED SIMULATION WATER BALANCE OUTPUT FILE (OUTW)

64

TABLE 16. DETAILED SIMULATION NITROGEN OUTPUT FILE (OUTN)

67

TABLE 17. DETAILED SIMULATION PEST OUTPUT FILE (OUTD)

70

TABLE 18. EXAMPLE OF AN EXPERIMENT PERFORMANCE DATA AVERAGES FILE (FILEA)

74

TABLE 19. EXAMPLE (FILET)

74

OF THE

OF AN

EXPERIMENT TIME-COURSE DATA FILE

TABLE 20. EXAMPLE WEATHER LIST FILE (WTH.LST)

79

TABLE 21. EXAMPLE SOIL PROFILE LIST FILE (SOL.LST)

80

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

vi

VOLUME 2-2.

CROP MODELS

95

ACKNOWLEDGEMENTS

97

PREFACE

99

CHAPTER ONE.

INTRODUCTION

103

CHAPTER TWO.

INPUTS

103

AND

OUTPUTS

WEATHER

103

SOIL

103

CROP MANAGEMENT

104

SIMULATION CONTROL

104

AVERAGE FINAL FIELD DATA

104

TIME-COURSE FIELD DATA

105

OUTPUT FILES

105

CHAPTER THREE.

FLOW

SYSTEM OVERVIEW

109

INFORMATION

109

COMPONENT STRUCTURE

110

CROP MODEL EXECUTION

113

HARDWARE

SOFTWARE

113

CREATING INPUT FILES

115

OF

AND

CHAPTER FOUR.

MODEL INPUT FILE

FOR

CROP MANAGEMENT

EXPERIMENT LIST FILE CHAPTER FIVE. CHAPTER SIX.

RUNNING

116 120

THE

CROP MODEL

DISPLAYING RESULTS

121 135

GENERAL FILE MANAGER

135

GRAPHIC DISPLAY

136

CHAPTER SEVEN.

MANAGEMENT OPTIONS

AND

SENSITIVITY ANALYSIS 141

SIMULATION TIMING

142

CROP

144

CULTIVAR

145

WEATHER

147

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

vii

SOIL

150

INITIAL CONDITIONS

154

PLANTING

156

HARVEST

158

WATER

AND

IRRIGATION

160

NITROGEN

163

PHOSPHORUS

167

RESIDUE

168

PEST

AND

DISEASE

169

CROP PROCESS OPTIONS

170

OUTPUT CONTROL

171

CHAPTER EIGHT.

PROBLEMS

CHAPTER NINE.

AND

ERROR MESSAGES

NEW CROP MODEL FEATURES

NITROGEN BALANCE MODELS ONLY)

AND

173 181

NITROGEN FIXATION (GRAIN LEGUME 181

CROP ROTATIONS

181

EVAPOTRANSPIRATION CALCULATIONS

182

PHOTOSYNTHESIS CALCULATION OPTIONS (GRAIN LEGUME MODELS ONLY)

182

CARBON DIOXIDE EFFECTS

182

CLIMATE CHANGE STUDIES

183

WEATHER GENERATORS

183

SPECIES, ECOTYPE

AND

CULTIVAR INPUTS

PEST EFFECTS (GRAIN LEGUME MODELS ONLY) CHAPTER TEN.

TEMPORARY MODEL INPUT FILE

REFERENCES APPENDIX A.

183 184 185 191

GENETIC COEFFICIENTS

197

CERES-BARLEY

197

CERES-MAIZE

201

CERES-MILLET

204

CERES-SORGHUM

206

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

viii

CERES-WHEAT

208

CROPGRO-DRY BEAN

212

CROPGRO-PEANUT

215

CROPGRO-SOYBEAN

218

CERES-RICE

221

CROPSIM-CASSAVA

223

APPENDIX B.

IMPLEMENTING PEST DAMAGE

225

PEST DAMAGE METHODOLOGY

225

PEST DAMAGE DATA FILES

227

EXAMPLES

OF

APPENDIX C.

PEST DATA FILES

AS

APPENDIX D.

VARIOUS EXPERIMENTS

232

RUNNING CROP MODELS UNDER THE DSSAT SHELL AND AS STAND-ALONE EXECUTABLES

RUNNING UNDER RUNNING

FOR

THE

DSSAT

V3

V3

SHELL

241 241

STAND-ALONE EXECUTABLES

242

CONTACTS

243

FOR

CROP MODEL INFORMATION

FIGURES

FIGURE 1. FLOW OF INFORMATION FOR CROP SIMULATION MODELS

THE

CURRENT DSSAT

V3

109

FIGURE 2. DSSAT V3 CROP SIMULATION MODULES INPUT/OUTPUT FILE HANDLING

AND

110

FIGURE 3. RELATIONSHIP BETWEEN THE TEMPORARY MODEL INPUT FILE AND THE VARIOUS CROP SIMULATION MODULES

185

TABLES

TABLE 1. OLD

AND

NEW GENERATION CROP SIMULATION MODELS

102

TABLE 2. AVERAGE FINAL FIELD DATA FILE. (FILEA = “UFGA7801.SBA”)

105

TABLE 3. TIME-COURSE FIELD DATA FILE. (FILET = “UFGA7801.SBT”)

107

TABLE 4. CROP MODEL INPUT FILE. (FILEX = “UFGA7801.SBX”)

117

TABLE 5. EXPERIMENT LIST FILE. (FILEL = “EXP.LST”)

120

TABLE 6A. CROP MODEL OUTPUT OVERVIEW FILE (OUTO = “OVERVIEW.OUT”)

129

FOR

CERES–MAIZE.

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

ix

TABLE 6B. CROP MODEL OUTPUT OVERVIEW FILE FOR CROPGRO– SOYBEAN. (OUTO = “OVERVIEW.OUT”)

132

TABLE 7. IMPORTANT ERROR MESSAGES

175

TABLE 8. EXAMPLE OF A TEMPORARY CROP MODEL INPUT FILE, USING FILE FORMAT = “I” = (“IBSNAT30.INP”) 188 TABLE 9. GENETIC COEFFICIENTS FILE (BACER940.CUL)

FOR

CERES–BARLEY. 199

TABLE 10. GENETIC COEFFICIENTS FILE (MZCER940.CUL)

FOR

TABLE 11. GENETIC COEFFICIENTS FILE (MICER940.CUL)

FOR

TABLE 12. GENETIC COEFFICIENTS FILE (SGCER940.CUL)

FOR

TABLE 13. GENETIC COEFFICIENTS FILE (WHCER940.CUL)

FOR

TABLE 14. GENETIC COEFFICIENTS FILE (BNGRO940.CUL)

FOR

TABLE 15. GENETIC COEFFICIENTS FILE (PNGRO940.CUL)

FOR

TABLE 16. GENETIC COEFFICIENTS FILE (SBGRO940.CUL)

FOR

TABLE 17. GENETIC COEFFICIENTS FILE (RICER940.CUL)

FOR

TABLE 18. GENETIC COEFFICIENTS FILE (CSSIM940.CUL)

FOR

CERES–MAIZE. 202

CERES–MILLET. 205

CERES–SORGHUM. 207

CERES–WHEAT. 209

CROPGRO–DRY BEAN. 214

CROPGRO–PEANUT. 217

CROPGRO–SOYBEAN. 220

CERES–RICE. 222

CROPSIM–CASSAVA. 224

TABLE 19. COUPLING POINTS AND DAMAGE TYPES USED DAMAGE IN THE CROPGRO CROP MODELS

TO

APPLY 226

TABLE 20. TYPICAL TIME SERIES FILE (FILET) CONTAINING EXAMPLES OF PEST PROGRESS DATA FOR SIX PEST AND DAMAGE TYPES FOR SOYBEAN

228

TABLE 21. A TYPICAL PEST COEFFICIENT FILE (BNGRO940.PST)

FOR

229

TABLE 22. A TYPICAL PEST COEFFICIENT FILE (PNGRO940.PST)

FOR

DRY BEAN . PEANUT. 230

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

x

TABLE 23. A TYPICAL PEST COEFFICIENT FILE (SBGRO940.PST)

FOR

SOYBEAN.

TABLE 24. CORN EARWORM POPULATION DATA COLLECTED FIELD SCOUTING FOR THE SOYBEAN EXPERIMENT UFGA7802

231 FROM

232

TABLE 25. TIME SERIES FILE FOR THE SOYBEAN EXPERIMENT UFGA7802 SHOWING 6TH INSTAR CORN EARWORM POPULATION LEVELS (CEW6)

233

TABLE 26. SIMULATION CONTROL SECTION OF FILE UFGA7802.SBX SHOWING THE DISEASE SIMULATION OPTION (DISES) SET TO ‘Y’ TO ENABLE PEST DAMAGE SIMULATION

234

TABLE 27. PERCENT DEFOLIATION MEASURED AT DIFFERENT OBSERVATION DATES FOR THE SOYBEAN EXPERIMENT UFQU7902. DEFOLIATION OCCURRED DUE TO VELVETBEAN CATERPILLAR POPULATION; HOWEVER, THE POPULATION LEVEL WAS UNKNOWN

235

TABLE 28. TIME SERIES DATA FILE FOR THE SOYBEAN EXPERIMENT UFQU7902 SHOWING OBSERVED DEFOLIATION LEVELS (PCLA) RESULTING FROM VELVETBEAN CATERPILLAR DAMAGE

236

TABLE 29. OBSERVED PERCENT DEFOLIATION AND PERCENT DISEASED LEAF AREA COLLECTED FROM FIELD SCOUTING FOR THE PEANUT EXPERIMENT UFGA8602

237

TABLE 30. TIME SERIES FILE FOR THE PEANUT EXPERIMENT UFGA8602 SHOWING OBSERVED LEVELS OF DEFOLIATION (PCLA) AND DISEASED LEAF AREA (PDLA) DUE TO LEAFSPOT DISEASE

239

TABLE 31. SUGGESTED ORGANIZATION OF FILES FOR EXECUTION OF CROP MODELS UNDER THE DSSAT V3 SHELL, USING CROPGROSOYBEAN AS AN EXAMPLE 241 TABLE 32. SUGGESTED ORGANIZATION OF FILES FOR STAND-ALONE EXECUTION OF CROP MODELS, USING CROPGROSOYBEAN AS AN EXAMPLE

242

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

xi

VOLUME 2-3.

G R A P H I N G S I M U L AT E D E X P E R I M E N T D ATA

AND

CHAPTER ONE.

INTRODUCTION

247

CHAPTER TWO.

PROGRAM OVERVIEW

249

GUIDELINES

249

MENU STRUCTURE

250

HARDWARE

250

CHAPTER THREE.

EXECUTE PROGRAM

CHAPTER FOUR.

GRAPH MENU

251 253

GROWTH, WATER, NITROGEN, PHOSPHORUS, DISEASES & PESTS, CARBON OPTIONS

253

USER-SELECTED VARIABLES OPTION

262

SUMMARY VALIDATION OPTION

263

SUMMARY RESPONSE OPTION

266

CHAPTER FIVE.

OPTIONS MENU

269

SELECT SIMULATION OPTION

269

COLORS OPTION

272

DIRECTORIES OPTION

274

SET GRAPH OPTION

275

OUTPUT DEVICE OPTIONS

277

SAVE GRAPH OPTIONS

279

REFERENCES

281

TABLES TABLE 1. EXAMPLE FILE OF SIMULATED AND OBSERVED DATA USED TO PLOT THE GRAPH FOR THE GROWTH VARIABLE, “GRAIN DRY WEIGHT” (GWAD).

261

TABLE 2. EXAMPLE

OF A

WINGRAF GRAPH.INI FILE.

280

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

xii

VOLUME 2-1

INPUT AND OUTPUT FILES

J.W. J ONES , L.A. H UNT, G. H OOGENBOOM , D.C. G ODWIN , U. S INGH , G.Y. T SUJI , N.B. P ICKERING , P.K. T HORNTON , W.T. B OWEN , K.J. B OOTE , J.T. R ITCHIE ,

UNIVERSITY OF FLORIDA, UNIVERSITY OF GUELPH UNIVERSITY OF GEORGIA, INTERNATIONAL FERTILIZER DEVELOPMENT CENTER UNIVERSITY OF HAWAII, MICHIGAN STATE UNIVERSITY INTERNATIONAL BENCHMARK SITES NETWORK FOR AGROTECHNOLOGY TRANSFER

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

1

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

2

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

CHAP T E R O N E . INT RO DUCTION For over twenty years scientists and engineers have been developing processoriented simulation models of various crops. Models have been published for most of the world’s major food crops as well as for cotton, tobacco, grasses and ornamental crops. These models generally describe the development, growth and yield of a crop on a homogeneous area of soil exposed to certain weather conditions. The objectives of crop modelers have varied, from understanding mechanisms of plant growth processes, to assisting in management and decision making. Although there are considerable differences in the mathematical structures, the processes included, and the levels of detail and mechanism in each model, there are also some major similarities. Most models are deterministic, operate on daily time steps and require similar input data for soil, weather and management conditions. Models developed for application to conditions other than those in an experiment usually only require weather and soil data that are widely available, and produce outputs that are of general interest to people studying crop management or to those interested in decision making and planning. Many scientists routinely collect experimental data that can be used to validate and improve existing crop models. These data represent a valuable resource for testing future models. However, to provide easy-to-use data sets for future model testing, and minimize unnecessary manipulation of data, a set of standards is needed for organizing the data files. Crop models which predict crop performance in differing environments are appealing to users from diverse disciplines. Many of these model users need application programs which perform analyses on model outputs. Other users working with spatial data bases may utilize programs which interpolate model inputs between points. Operation of these application programs requires inputs and outputs in a standard form. In recent years, the International Benchmark Sites Network for Agrotechnology Transfer (IBSNAT) has published documentation for a set of crop model inputs and outputs (IBSNAT, 1986, 1990). This system of files and data formats was used for the models integrated into the Decision Support System for Agrotechnology Transfer (DSSAT v2.1) (IBSNAT, 1989), in which corn, wheat, soybean, and peanut crop models all used the same database software and strategy evaluation program. This system was useful for running and validating

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

3

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

the models, for conducting sensitivity analysis, and for evaluating the variability and risks of different management strategies for a range of locations specified by soil and weather data. The attempt to develop and use general files and formats provided a good start and demonstrated the utility of the endeavor. However, the introduction of other crops (such as rice), the introduction of other models of the same crops, and the introduction of other processes into the existing models revealed several deficiencies. Further, the large number of files presented difficulties to many users. Work was initiated, therefore, to develop a more universal set of files. The work reported by IBSNAT (1986, 1990) provided a basis for many of the files and file structures presented here. In that original work, the inputs and outputs were limited to those that described weather, soil water and nutrient conditions, row and planting geometries and crop management. In the current document, not only have those inputs and outputs been expanded but they are now more flexible, have more variables and contain additional environmental conditions. The inputs and outputs refer to a point in space and do not include watershed or other spatially varying conditions. The present structure, however, is sufficiently flexible to easily allow additions of these and other factors in the future. A utility program called Convert (see Volume 1-5, Imamura and Tang 1994, of this book) is available in DSSAT v3 to convert DSSAT v2.1 files to the new file structure. Moreover, if a user wishes to create a new experiment data set for DSSAT v3, there is a utility program called XCreate (see Volume 1-4, Imamura 1994, of this book) which creates the new crop management or experiment input file which is referred to as FILEX. The files and file structures described here are designed to accommodate a diversity of crop models and applications. Their specifications are the basis of the data structures used in DSSAT v3. They have been constructed to facilitate the exchange of data among modelers and other users and can be used as direct input to crop models. They also may function as a medium to generate modelspecific input files and keep intact the facility for data set interchange. Considerable thought has been given to designing a system to maximize the flexibility of input configurations. This flexibility has often meant specification of a considerable number of “slots” for inputs. Within this document, examples of minimum configurations of input files for particular applications are highlighted (see the section entitled, “Examples of FILEX for Various Experiments”).

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

4

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

CHAPTER TWO. FILE STRUCTURE The files are organized into input, output and experiment performance data files (Table 1). A typical organization of these is depicted in Figure 1. The experiment performance files are needed only when simulated results are to be compared with data recorded in a particular experiment. In some cases, however, they could be used as input files to ‘reset’ some variables during the course of a simulation run. They could also be used to record time series of pests or pest damage to the crop, which could be used as input to crop models. The model output files are organized to allow users to select the information needed for a particular application. Similarly, model inputs are organized to allow some flexibility in their use with specific models. For example, there is a soil nutrient management section that users could eliminate when their crop model does not include a soil fertility component or when fertilizer was applied to eliminate nutrient stresses.

F I L E A N N O TAT I O N Each file should contain file headings, and, if the file is partitioned into sections, section headings. In addition, it is often desirable to add remarks to data contained within a file. These remarks may be header lines indicating the nature of following data items or may be comments on some aspects of the quality or source of the data. Headers may be used by the input components of a model to undertake particular operations, while comment lines would generally be ignored. The following symbols, placed in column 1, indicate the nature of the annotation: * file or section heading @ header line specifying variables occurring below ! comment line.

FILE NAMING CONVENTIONS A set of file-naming conventions have been adopted to facilitate recognition of different categories of data. The convention has two parts: 1) the file extension which is used to specify the type of file; and 2) the prefix which is used to identify the contents of the file. Following is a list of extensions and prefixes. EXTENSIONS

.WTH .SOL

Weather data file Soil profile data file

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

5

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

EXP.LST

WTH.LST

SOIL.LST

FILEX Specification of codes for genotype, soil, & weather

Experimental Data File

FILEC

FILES

FILEW

Cultivar Data

Cultivar Code

Soil Data File

Weather Data File

Weather Station Soil Number

Optional sections depending on experiment type & model capability

Performance Data Files FILED

FILEP Replicate Data by Plot

Replicate Data by Date

FILEA

FILET

Average Summary Data

Average Time Course Data

CROP MODELS

Output Files Depending on Option Settings and Simulation Applications

OVERVIEW

SUMMARY

FIGURE 1. OVERVIEW

GROWTH

OF

INPUT

CARBON

AND

WATER

NITROGEN

OUTPUT FILES USED

BY

PHOSPHOR

PEST

C ROP MODELS .

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

6

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

.CUL .ECO .SPE .OUT .LST

Cultivar/variety specific coefficient file Ecotype specific coefficient file Crop (species) specific coefficient file Output file generated by the crop model A list file - provides a list of either experiments, weather data sets or soil data sets .ccX Experiment details file (i.e., FILEX) .ccP Observation data (replicate values) .ccD Performance data (replicate values) .ccA Average values of observation data .ccT Time course data (averages) The ‘cc’ in the above extensions indicates a crop code (e.g., WH). The current crop codes used are listed below: Code Crop AL Alfalfa/Lucerna AR Aroid BA Barley BN Dry bean (Phaseolus bean) BW Broad leaf weeds CO Cotton CS Cassava FA Fallow GW Grass-weeds ML Pearl millet MZ Maize/Corn PN Peanut PT Potato RI Rice SB Soybean SC Sugar cane SG Sorghum ST Shrubs/Trees WH Wheat PREFIXES

For most model input files and experiment observation files, the prefix is constructed from an institute code (2 characters), a site code (2 characters), the year of the experiment (2 characters) and an experiment number (2 characters). For

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

7

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

example, an experiment conducted by the University of Florida (UF) at Gainesville (GA) in 1988 (88) would yield a file prefix of UFGA8801. The file prefix conventions used for output files and genotype coefficient files are shown in Table 1.

M I S S I N G D ATA For all input files, the value ‘-99’ is entered when required numeric data are missing or unavailable.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

8

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

CHAPTER THREE. I N PUT S Input files are further divided into those dealing with the experiment, weather and soil, and the characteristics of different genotypes (crop and cultivar) (Table 1).

EXPERIMENT LIST FILE The EXP.LST file (or FILEL) contains a listing of available simulation experiments (Table 2). This file contains no information on individual experiments, but lists all of the experiment files available in the working directory, having one line of information for each experiment. First on this line is the optional experiment list number. There is a blank space and then there is the experiment identifier which specifies the institute code, site code, year of experiment, and experiment number (see the “Prefixes” section above). There is a blank space and then three characters. The first two characters are used for the crop species code (which can specify a group of species as well as one individual species, e.g., WH for Wheat), and the third character defines the file type; the default file type for the IBSNAT models is “X” (see example in Table 2). There is a blank space and then the next field of 60 characters briefly describes the experiment, usually by giving the experiment name. If there are any peculiarities of the experimental conditions at the specific site, these should be added after the experiment name, using a semicolon to separate the two items. Finally, factors included in the experiment, and the number of levels for each factor, should be documented in abbreviated form (e.g., cultivars as CV; irrigation as IR, etc.) and added after the experiment name, each one separated by a semicolon. For each experiment file available for simulation, one line of information, equivalent in content to the one just described, must be placed in the EXP.LST file. Typically, during model execution, this experiment list would appear as a menu from which the user could select an experiment for simulation. The IBSNAT models are organized to allow users to perform sensitivity analysis, and in such cases, weather data files, soil profiles and other data files (as necessary) are needed and a listing of these, in a form the models can read, must be generated by the user through a utility found in DSSAT v3, so users can select alternate files during a simulation. Examples of a weather list file (WTH.LST) and a soil list file (SOL.LST) used by crop models in DSSAT v3 are given in Appendix A. These list files may be model-specific and are not essential for documenting basic model inputs and outputs.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

9

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

T ABLE 1.

C ROP MODEL INPUT

Internal File Name

AND

OUTPUT FILES .

Example File Name(s)

External

Description

FILEL

EXP.LST

Listing of all available experiment details files (FILEXs)

FILEX

UFGA8801.SBX

Experiment details file for a specific ex periment (e.g., soybean at UFGA): treatments, field conditions, crop management and simulation controls

INPUT F ILES Experiment

Weather and Soil FILEW UFGA8801.WTH

FILES

SOIL.SOL

Crop and Cultivar FILEC SBGRO940.CUL1,2

Weather data, daily, for a specific (e.g.,UFGA) station and time period (e.g., for one year) Soil profile data for a group of experimental sites in general (e.g.,SOIL.SOL) or for a specific institute (e.g., UF.SOL)

Cultivar/variety coefficients for a particular crop species and model; e.g., soybean for the ‘GRO’ model,version 940 (i.e., released in 1994)

FILEE

SBGRO940.ECO3

Ecotype specific coefficients for a particular crop species and model; e.g., soybean for the ‘GRO’ model,version 940(i.e., released in 1994)

FILEG

SBGRO940.SPE3

Crop (species) specific coefficients for a particular model; e.g., soybean for the ‘GRO’ model, version 940 (i.e., release in 1994)

OUTO

OVERVIEW.OUT

Overview of inputs and major crop and soil variables.

OUTS

SUMMARY.OUT

Summary information: crop and soil input and output variables; one line for each crop cycle or model run.

O UTPUT F ILES4

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

10

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

OUTG OUTC OUTW OUTN OUTP OUTD

GROWTH.OUT CARBON.OUT WATER.OUT NITROGEN.OUT PHOSPHOR.OUT PEST.OUT

Detailed time-sequence information on: Growth Carbon balance Water balance Nitrogen balance Phosphorus balance Pests, diseases, weed damage/levels

E XPERIMENT DATA FILES FILEP

UFGA8801.SBP

Performance data (replicate values, arranged by plots) for a soybean experiment. (Used for basic experimental data from which averages and time course data are calculated.)

FILED

UFGA8801.SBD

Performance data (replicate values, arranged by date) for a soybean experiment. (Used for basic experimental data from which averages and time course data are calculated.)

FILEA

UFGA8801.SBA

Average values of performance data for a soybean experiment. (Used for comparison with summary model results.)

FILET

UFGA8801.SBT

Time course data (averages) for a soybean experiment. (Used for graphical comparison of measured and simulated time course re sults.)

1

These names reflect a standard naming convention in which the first two spaces are for the crop code, the next five characters are for the model name, beginning at position 3, and the final one is a file identifier that in general is set to zero.

2

General names (e.g., SOYBEAN.CUL) have been reserved for those cases where the data requirements are truly model independent.

3

These files are used by the ‘GRO’ models, but other crop models may not need them; thus FILEC is the only required Cultivar file for running all crop models.

4

The example names for the output files (e.g., GROWTH.OUT) are for temporary files that are rewritten during each simulation run. Output files can be saved, however, and in this case the file names are made up of the usual institute, site, experiment and crop identifiers, with a final letter, G, W, etc., to designate growth, water or other data types. (An example of a saved OVERVIEW output file would be UFGA8801.SBO, where the “O” designates Overview; other examples would be UFGA8801.SBS,G,C,W,N,P,D where the letters designate Summary, Growth, Carbon, Water, Nitrogen, Phosphorus and Pest output files, respectively.)

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

11

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

T ABLE 2.

E XPERIMENT L IST FILE . (FILEL = “EXP.LST”)

STRUCTURE Variable

Variable Name1

Experiment list number4 EXLTN Experiment identifier, generally made up of: Institute code (2 characters) Site code (2 characters) Experiment code (4 characters) EXPER File extension (where the 1st two characters are the crop group code(e.g., “WH”)5 EXT Experiment name ENAME

Header2

Format3

#

0 I 2

FILENAME

1 C 8

EXT ENAME

1 C 3 1 C 60

1

Abbreviations used as variable names in the IBSNAT models.

2

Abbreviations suggested for use in header lines (those designated with ‘@’) within the file.

3

Formats are presented as follows: number of leading spaces, variable type (Character = C, Integer = I), variable width.

4

“Experiment list number” is an optional entry for this line. If it is not used, two blank spaces must be left at the beginning of each line.

5

The IBSNAT models use “X” for the third character of the extension.

E XAMPLE *EXPERIMENT LIST @# FILENAME EXT ENAME.................................................. 1 UFGA7801 SBX BRAGG,IRRIGATED&NON-IRRIGATED;2IR 2 UFGA8101 SBX COBB,IRRIGATED+VEG+REPROD.STRESS;3IR 3 UFGA9101 SBX POTENTIAL YIELD EXAMPLE;2CV;2SI 4 UFGA9102 SBX CLIMATE CHANGE STUDY EXAMPLE;2CV;ESI

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

12

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

E X P E R I M E N T D E TA I L S F I L E One main file, referred to as FILEX (Table 3), documents the inputs to the models for each “experiment” to be simulated. Each experiment could be a real one for which there would be corresponding observed field data, or a hypothetical one defined for simulation. Thus, inputs for many real and hypothetical experiments can be stored for documentation and for use at different times. The file heading contains the experiment code and name, the treatment combinations, and details of the experimental conditions (field characteristics, soil analysis data, initial soil water and inorganic nitrogen conditions, seedbed preparation and planting geometries, irrigation and water management, fertilizer management, organic residue applications, chemical applications, tillage operations, environmental modifications, harvest management), and simulation controls. The experiment code uses the same convention as the file naming system to provide information on institute, site, planting year, experiment number, and crop. For example: UFGA8201MZ, is the code for maize experiment 01, planted in 1982 by the institute designated by UF (University of Florida) at site GA (Gainesville). The file can also contain the names of the people supplying the data set and information on the plot sizes, etc., used in the experiment. It may also contain any incidents that occurred during the course of the experiment that may affect the interpretation of the data. These latter items are not normally used by simulations models, but are provided for reference and assistance in interpreting simulation results. Documentation of these sections is included in Table 3, for use when required. The structure of FILEX has been designed with the goal of maximizing the flexibility of input configurations while preserving the concept of entering only a minimum of inputs to run a simulation. The file can be easily configured to accommodate very different types of simulation runs. To enable this flexibility, the file description provides slots for inputs and descriptive information which may be needed for some types of simulation runs but not for others. FILEX has been configured in such a way that only those data required for individual simulations need be entered. In order for FILEX to accommodate a wide variety of experimental layouts, a broad definition of what comprises a treatment is necessary. For the purposes of data organization in FILEX, a treatment can be any factor of the experiment which varies. In addition to such things as combinations of fertilizer rates, varieties and irrigation levels, treatments can be different fields or different soils or different soil analyses or different weather. Thus if an experiment compared varieties across locations without water, nutrient and pest limitations, the locations of fields become treatments. This enables one experiment to utilize multiple weather data sets which was not possible when using the IBSNAT v2.1 model inputs and outputs (IBSNAT, 1990). DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

13

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

Most experiments will have more than one treatment. Many experiments will be conducted on only one site with treatments confined to such factors as fertilizer rates, varieties or irrigation treatments. Alternatively, an experiment such as a plant breeding experiment may span several sites where the sites and varieties are treatments. To accommodate these differing possibilities, FILEX has been designed with specific sections dedicated to particular categories of inputs. Only those sections required for the particular simulation need be present in FILEX. Thus, data for the first treatment of an experiment are entered in the appropriate sections in FILEX. If, however, the experiment has more than one treatment, which is usually the case, then the data which are common to all treatments need not be repeated. This contrasts with the organization of inputs described for previous generations of IBSNAT models (IBSNAT, 1986 and 1990). In this newest version, only those data which are “new” for the treatment need be coded. For example, if an experiment examined the effect of five nitrogen rates, FILEX would contain sections for planting details and initial conditions and a section for fertilizer rate information for the first treatment. For the second treatment, the planting details and initial conditions would not be repeated but a second rate would appear in the fertilizer details section. The various sections of FILEX are summarized below. FILE SECTION

TYPICAL CONTENTS

Experiment details

Experiment name and codes

General

Names of people, addresses; name and location of experiment site(s); plot information

Treatments

Treatment number, name and specification of level codes of the treatment factors

Cultivar

Cultivar level, crop code, cultivar ID and name

Fields

Specification of field level, ID, weather station name, soil, and field description details

Soil Analysis

Set of soil properties used for the simulation of nutrient dynamics, based on field nutrient sam pling, if any

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

14

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

Initial Conditions

Starting conditions for water and nitrogen in the profile. Also used for carryover of root residue from the previous crop, and N symbiosis initializtion details when needed

Planting Details

Planting date, population, seeding depth and row spacing data

Irrigation and Water Management

Irrigation dates, amounts, thresholds and rice flood water depths

Fertilizers

Fertilizer rate, date and type information

Residues

Additions of straw, green manure, animal manure

Chemical Applications

Herbicide and pesticide application data

Environment Modifications

Adjustment factors for weather parameters as used in climate change and constant environ ment studies (e.g., constant daylength, shading, constant temperature, etc.)

Tillage Information

Details of dates, types of tillage operations

Harvest Details

Information on harvest dates, plant components harvested, etc.

Simulation Controls

Specification of simulation options (e.g., starting dates), on/off options for model components (e.g., water, and nitrogen balances), and output options

It should be noted that for any particular simulation, only a few of these sections would be needed. However, the minimum required information for a simulation (that is, when there are no water, nutrient or pest stresses, and when soil water and nitrogen balances are not used) are the Experiment, Cultivar, Treatment, Field, Planting Details and Simulation Controls sections.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

15

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

T ABLE 3.

E XPERIMENT D ETAILS FILE . (FILEX)

STRUCTURE Variable

Variable Name1 Header2

Format3

Line 1 *EXP.DETAILS: Experiment identifier, made up of: Institute code Site code Experiment number/abbreviation Crop group code Experiment name4

INSTE SITEE EXPTNO CG ENAME4

*GENERAL5 Line 1(People) Names of scientists

PEOPLE

PEOPLE

1 C 75

Line 2 (Address) Contact address of principal scientist

ADDRESS

ADDRESS

1 C 75

Line 3 (Sites) Name and location of experimental site(s)6 SITE(S)6

SITE(S)

1 C 75

Line 4 (Plot information) Gross plot area per rep, m-2 Rows per plot Plot length, m Plots relative to drains, degrees Plot spacing, cm Plot layout Harvest area, m -2 Harvest row number Harvest row length, m Harvest method

PAREA PRNO PLEN PLDR PLSP PLAY HAREA HRNO HLEN HARM

PAREA PRNO PLEN PLDR PLSP PLAY HAREA HRNO HLEN HARM

3 1 1 1 1 1 1 1 1 1

All other lines (Incidents) Notes

NOTES

NOTES

1 C 75

*TREATMENTS Treatment number Rotation component: number (default=1); option (default=1) Crop component number (default = 0)

TRTNO ROTNO ROTOPT CRPNO

TN R O C

0 1 1 1

0 C 13 1 0 0 0 1

C C C C C

R I R I I C R I R C

I I I I

2 2 4 2 60

6 5 5 5 5 5 5 5 5 15

1 1

1 1

2 1 1 1

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

16

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

Treatment name Cultivar level Field level Soil analysis level Initial conditions level Planting level Irrigation level Fertilizer level Residue level Chemical applications level Tillage and rotations level Environmental modifications level Harvest level Simulation control level *CULTIVARS Cultivar level Crop code Cultivar identifier (Institute code + Cultivar name

Number)

TITLET LNCU LNFLD LNSA LNIC LNPLT LNIR LNFER LNRES LNCHE LNTIL LNENV LNHAR LNSIM

TNAME CU FL SA IC MP MI MF MR MC MT ME MH SM

1 1 1 1 1 1 1 1 1 1 1 1 1 1

LNCU CG

CU CR

0 I 2 1 C 2

VARNO CNAME

INGENO CNAME

1 C 6 1 C 16

FL ID_FIELD WSTA

0 I 2 1 C 8 1 C 8

FLSA FLOB FLDT FLDD FLDS FLST SLTX SLDP ID_SOIL

1 1 1 1 1 1 1 1 1

LNSA SADAT

SA SADAT

0 I 2 1 I 5

SMHB

SMHB

1 C 5

SMPX SMKE

SMPX SMKE

1 C 5 1 C 5

*FIELDS Field level LNFLD Field ID (Institute + Site + Field) FLDNAM Weather station code (Institute+Site) WSTA Slope and aspect, degrees from horizontal plus direction (W, NW, etc.) SLOPE Obstruction to sun, degrees FLOB Drainage type, code 7 DFDRN Drain depth, cm FLDD Drain spacing, m SFDRN Surface stones(Abundance,%+Size,S,M,L) FLST Soil texture 7 SLTX Soil depth, cm SLDP Soil ID (Institute+Site+Year+Soil) SLNO *SOIL ANALYSIS Line 1 Soil analysis level Analysis date, year + days from Jan. 1 pH in buffer determination method, code7 Phosphorus determination method, code7 Potassium determination method, code7

C I I I I I I I I I I I I I

C R C R R C C R C

25 2 2 2 2 2 2 2 2 2 2 2 2 2

5 5 5 5 5 5 5 5 10

0 0 0

0

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

17

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

All other lines (L = Layer number) Soil analysis level Depth, base of layer, cm Bulk density, moist, g cm-3 Organic carbon, g kg-1 Total nitrogen, g kg-1 pH in water pH in buffer Phosphorus, extractable, mg kg-1 Potassium, exchangeable, cmol kg-1

LNSA SABL(L) SADM(L) SAOC(L) SANI(L) SAPHW(L) SAPHB(L) SAPX(L) SAKE(L)

SA SABL SADM SAOC SANI SAHW SAHB SAEX SAKE

0 1 1 1 1 1 1 1 1

IC PCR ICDAT

0 I 2 1 C 5 1 I 5

ICRT ICND

1 R 5 0 1 R 5 0

ICRN

1 R 5 2

ICRE

1 R 5 2

LNIC DLAYRI(L) SWINIT(L) INH4(L) INO3(L)

IC ICBL SH20 SNH4 SNO3

0 1 1 1 1

LNPLT YRPLT IEMRG

MP PDATE EDATE

0 I 2 1 I 5 1 I 5

PLANTS

PPOP

1 R 5 1

PLTPOP

PPOE

1 R 5 1

PLME

PLME

5 C 1

PLDS ROWSPC AZIR SDEPTH

PLDS PLRS PLRD PLDP

5 1 1 1

*INITIAL CONDITIONS Line 1 Initial conditions level LNIC Previous crop code PRCROP Initial conditions measurement IDAYIC date, year + days Root weight from previous crop, kg ha-1 WRESR Nodule weight from previous crop, kg ha-1 WRESND Rhizobia number, 0 to 1 scale (default = 1) EFINOC Rhizobia effectiveness, 0 to 1 scale (default = 1) EFNFIX All other lines (L = Layer number) Initial conditions level Depth, base of layer, cm Water, cm3 cm-3 x 100 volume percent Ammonium, KCl, g elemental N Mg-1 soil Nitrate, KCl, g elemental N Mg-1 soil *PLANTING DETAILS Planting level number Planting date, year + days from Jan. 1 Emergence date, earliest treatment Plant population at seeding, plants m -2 Plant population at emergence, plants m -2 Planting method, transplant (T), seed (S), pregerminated seed (P) or nursery (N) Planting distribution, row (R), broadcast (B) or hill (H) Row spacing, cm Row direction, degrees from N Planting depth, cm

I R R R R R R R R

I R R R R

C R R R

2 5 5 5 5 5 5 5 5

0 1 2 2 1 1 1 1

2 5 0 5 3 5 5 1

1 5 0 5 0 5 1

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

18

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

Planting material dry weight, kg ha-1 Transplant age, days Temp. of transplant environment, °C Plants per hill (if appropriate) *IRRIGATION AND WATER MANAGEMENT Line 1 Irrigation level Irrigation application efficiency, fraction Management depth for automatic application, cm Threshold for automatic appl., % of max. available End point for automatic appl., % of max. available End of applications, growth stage Method for automatic applications, code5 Amount per irrigation if fixed, mm

SDWTPL SDAGE ATEMP PLPH

PLWT PAGE PENV PLPH

1 1 1 1

LNIR

MI

0 I 2

EFFIRX

EFIR

1 R 5 2

DSOILX

IDEP

1 R 5 0

THETCX

ITHR

1 R 5 0

IEPTX IOFFX IAMEX AIRAMX

IEPT IOFF IAME IAMT

1 1 1 1

MI

0 I 2

IDATE IROP

1 I 5 1 C 5

IRVAL

1 R 5 0

All other lines (J = Irrigation application number) Irrigation level LNIR Irrigation date, year + day or days from planting IDLAPL(J) Irrigation operation, code7 IRRCOD(J) Irrigation amount, depth of water/water table, bund height, or percolation AMT(J) rate, mm or mm day -1 *FERTILIZERS (INORGANIC) (J = Fertilizer Fertilizer application level Fertilization date, year + day or days from planting Fertilizer material, code7 Fertilizer application/placement, code7 Fertilizer incorporation/application depth, cm N in applied fertilizer, kg ha-1 P in applied fertilizer, kg ha-1 K in applied fertilizer, kg ha-1 Ca in applied fertilizer, kg ha-1 Other elements in applied fertilizer, kg ha-1 Other element code, e.g.,. MG

R R R R

R C C R

5 5 5 5

0 0 1 1

5 0 5 5 5 0

application number) LNFERT MF

0 I 2

FDAY(J) IFTYPE(J) FERCOD(J)

FDATE FMCD FACD

1 I 5 1 C 5 1 C 5

DFERT(J) ANFER(J) APFER(J) AKFER(J) ACFER(J)

FDEP FAMN FAMP FAMK FAMC

1 1 1 1 1

AOFER(J) FOCOD(J)

FAMO FOCD

1 R 5 0 1 C 5

R R R R R

5 5 5 5 5

0 0 0 0 0

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

19

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

*RESIDUES AND OTHER ORGANIC MATERIALS (J = Residue application number) Residue management level LNRES MR 0 I 2 Incorporation date, year + days RESDAY(J) RDATE 1 I 5 Residue material, code7 RESCOD(J) RCOD 1 C 5 Residue amount, kg ha-1 RESIDUE(J) RAMT 1 R 5 0 Residue nitrogen concentration, % RESN(J) RESN 1 R 5 2 Residue phosphorus concentration, % RESP(J) RESP 1 R 5 2 Residue potassium concentration, % RESK(J) RESK 1 R 5 2 Residue incorporation percentage, % RINP(J) RINP 1 R 5 0 Residue incorporation depth, cm DEPRES(J) RDEP 1 R 5 0 *CHEMICAL APPLICATIONS (J = Chemical application number) Chemical applications level LNCHE MC Application date, year + day or days from planting CDATE(J) CDATE Chemical material, code7 CHCOD(J) CHCOD Chemical application amount, kg ha-1 CHAMT(J) CHAMT Chemical application method, code CHMET(J) CHME Chemical application depth, cm CHDEP(J) CHDEP Chemical targets CHT CHT *TILLAGE (J = Tillage application number) Tillage level TL Tillage date, year + day TDATE(J) Tillage implement, code7 TIMPL(J) Tillage depth, cm TDEP(J)

TL TDATE TIMPL TDEP

*ENVIRONMENT MODIFICATIONS (J = Environment modification number) Environment modifications level LNENV ME Modification date, year + day or days from planting WMDATE(J) ODATE Daylength adjustment factor (A,S,M,R) DAYFAC(J) E Daylength adjustment, h DAYADJ(J) DAY Radiation adjustment factor (A,S,M,R) RADFAC(J) E Radiation adjustment, MJ m-2 d-1 RADADJ(J) RAD Temperature (maximum) adjustment factor (A,S,M,R) TXFAC(J) E Temperature (maximum) adjustment, °C TXADJ(J) MAX Temperature (minimum) adjustment factor (A,S,M,R) TMFAC(J) E Temperature (minimum) adjustment, °C TMADJ(J) MIN Precipitation adjustment factor (A,S,M,R) PRCFAC(J) E Precipitation adjustment, mm PRCADJ(J) RAIN CO2 adjustment code (A,S,M,R) CO2FAC(J) E CO2 adjustment, vpm CO2ADJ(J) CO2 Humidity adjustment factor (A,S,M,R) DPTFAC(J) E Humidity (dew pt) adjustment, °C DPTADJ(J) DEW

0 I 2 1 1 1 1 1 1

I C R C C C

5 5 5 2 5 5 5

0 1 1 1

I I C R

2 5 5 5 0

0 I 2 1 1 0 1 0

I C R C R

5 1 4 1 1 4 1

1 C 1 0 R 4 1 1 0 1 0 1 0 1 0

C R C R C R C R

1 4 1 4 1 4 1 4

1 1 0 1

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

20

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

Wind adjustment factor (A,S,M,R) WNDFAC(J) E Wind adjustment, km day-1 WNDADJ(J) WIND N.B. A = add, S = subtract, M = multiply, R = replace *HARVEST DETAILS (J = Harvest number) Harvest level Harvest date, year + day or days from planting Harvest stage Harvest component, code7 Harvest size group, code7 Harvest percentage, %

1 C 1 0 R 4 1

LNHAR

HL

0 I 2

HDATE(J) HSTG(J) HCOM(J) HSIZ(J) HPC(J)

HDATE HSTG HCOM HSIZ HPC

1 1 1 1 1

I C C C R

5 5 5 5 5 0

1

Abbreviations used as variable names in the IBSNAT models.

2

Abbreviations suggested for use in header lines (those designated with ‘@’) within the file.

3

Formats are presented as follows: number of leading spaces, variable type (Character = C, Real = R, Integer = I), variable width, and (if real) number of decimals.

4

It is suggested that Experiment Name be composed of a short name, followed by a blank space, summary of treatment factors, followed by a blank space, and end with a local abbreviation for the experiment in parenthesis. This information will then be available for searching and organizing experiments, using the list managers described in Volume 1-3 (Hunt et al. 1994) of this book.

5

Each section in the actual file needs a heading of this type.

6

It is suggested that the SITE information on data line 3 be composed of a short site name, followed by a blank space, then latitude, longitude, elevation (in meters above sea level, and climate zone, each separated by a semi-colon. For example: GAINESVILLE,FL 29.63N;82.37W;40M;SEUSA

7

For a complete listing of these codes, see Appendix B.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

21

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

TREATMENT LEVEL INDICATORS

A system of pointers or treatment level indicators reduces the amount of data contained in FILEX. These level indicators are used to specify the combinations of inputs for each treatment. They flag the models as to which sections of FILEX are needed for the simulation. Within each flagged section, the indicators point to the data relevant to the chosen treatment. The level indicators in the order in which they appear in FILEX, together with their abbreviations are shown below: Cultivar Level CU Field Level FL Soil Analysis Level SA Initial Conditions Level IC Planting Level MP Irrigation Level MI Fertilizer Level MF Residue Level MR Chemical applications Level MC Tillage And Rotations Level MT Environmental Modification Level ME Harvest Level MH Simulation Control Level SM As an example, consider an experiment with 3 N rates and 2 irrigation management levels. In this experiment, the cultivar, field details, initial conditions and residue management remain the same for all treatments. Assuming planting details and required simulation options are also the same for both treatments and there is no consideration given to chemical, tillage and environmental modification, then the treatment section of FILEX and the corresponding level indicators would appear as below. Note how the level indicators for water and fertilizer vary with treatments. *TREATMENTS @N R O C 01 1 1 0 02 1 1 0 03 1 1 0 04 1 1 0 05 1 1 0 06 1 1 0

TNAME CU FL SA IC MP MI MF MR MC MT ME MH SM 0 N LOW WATER 1 1 0 1 1 1 1 1 0 0 0 0 1 30 N LOW WATER 1 1 0 1 1 1 2 1 0 0 0 0 1 90 N LOW WATER 1 1 0 1 1 1 3 1 0 0 0 0 1 0 N HI WATER 1 1 0 1 1 2 1 1 0 0 0 0 1 30 N HI WATER 1 1 0 1 1 2 2 1 0 0 0 0 1 90 N HI WATER 1 1 0 1 1 2 3 1 0 0 0 0 1

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

22

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

From the data depicted here, the model will discern that it must locate data in the cultivar (CU), field (FL), initial conditions (IC), planting (MP), irrigation (MI), fertilizers (MF), residue (MR) and simulation control (SM) sections of FILEX. The zeros for soil analysis (SA), chemical (MC), tillage (MT), environment (ME), and harvest (MH) indicate that no data are required for these sections. In treatment one, the irrigation data to be used would be those appearing first in the irrigation section. The fertilizer data for treatment one would be those appearing first in the fertilizer section. For the second treatment the same irrigation data are used but the second set of fertilizer data from the fertilizer section is used. For the fourth treatment, the second irrigation data set and the first fertilizer data set are used. Details of all sections of FILEX are provided in Table 3. It should also be noted that not all entries within a particular section are required for all simulations. To facilitate construction of a typical FILEX, various examples are provided in the “Examples” section below. SIMULATION CONTROL INFORMATION

The Simulation Controls section (see Table 4) in FILEX has two basic functions. First, it specifies the options to be used in a particular simulation run and controls the types and frequencies of outputs to be obtained. An OPTIONS line specifies whether the water and nitrogen balances will be used and whether pest damage will be considered in the run. The METHODS line specifies the methods for computing processes such as evapotranspiration and photosynthesis. The MANAGEMENT line specifies whether different management operations, such as planting and irrigation, are to be based on recorded data as input in the FILEX or are to be simulated internally based on automatic management options specified in this section. The OUTPUTS line specifies the frequency of daily outputs and the types of outputs to write (such as summary, growth, water, nitrogen and pest). Since there are no default selections for the variables contained under Methods, Management and Outputs, selections for these variables must be made. The second function of the Simulation Control section is to specify the parameters for controlling automatic management in the simulation (if any are used) for planting, irrigating, applying nitrogen and residues, and harvesting. For example, information on the “sowing” and “harvesting” windows for use with hypothetical experiments, as well as the soil water threshold that triggers automatic application and the depth of water management, are contained in this section. One Simulation Control section is required for each FILEX, and more than one could be used to control simulation for different treatments if needed. DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

23

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

T ABLE 4.

S IMULATION C ONTROLS.

STRUCTURE Variable

Variable Name 1 Header 2

Line 1: General Level number Identifier Runs: Years Replications Start of Simulation, code: Suggested codes: E = On reported emergence date I = When initial conditions measured P = On reported planting date S = On specified date Date, year + day (if needed) Random number seed Title

Format 3

LNSIM TITCOM

N GENERAL

0 I 2 1 C 11

NYRS NREPSQ ISIMI

NYERS NREPS START

4 I 2 4 I 2 5 C 1

YRSIM RSEED TITSIM

SDATE RSEED SNAME

1 I 5 1 I 5 1 C 25

N OPTIONS WATER NITRO SYMBI PHOSP POTAS DISES

0 1 5 5 5 5 5 5

Line 2: Options Level number LNSIM Identifier TITOPT Water (Y = yes; N = no) ISWWAT Nitrogen (Y = yes; N = no) ISWNIT Symbiosis (Y= yes, N= no, U= unlimited N) ISWSYM Phosphorus (Y = yes; N = no) ISWPHO Potassium (Y = yes; N = no) ISWPOT Diseases and other pests (Y = yes; N = no) ISWDIS (Y = simulate process; N = do not simulate process)

Line 3: Methods Level number LNSIM N Identifier TITMET METHODS Weather MEWTH WTHER M = Measured data, as recorded G = Simulated data, stored as *.WTG files S = Simulated data (Internal weather generator using monthly inputs) W = Simulated data (Internal WGEN weather generator) Initial Soil Conditions MESIC M = As reported S = Simulated outputs from previous model run

INCON

I C C C C C C C

2 11 1 1 1 1 1 1

0 I 2 1 C 11 5 C 1

5 C 1

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

24

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

Light interception MELI E = Exponential with LAI H = ‘Hedgerow’ calculations Evaporation MEEVP P = FAO - Penman R = Ritchie modification of Priestley-Taylor Infiltration MEINF R = Ritchie method S = Soil Conservation Service routines Photosynthesis MEPHO C = Canopy photosynthesis response curve R = Radiation use efficiency L = Leaf photosynthesis response curve

LIGHT

5 C 1

EVAPO

5 C 1

INFIL

5 C 1

PHOTO

5 C 1

Line 4: Management Level number LNSIM N 0 I Identifier TITMAT MANAGEMENT 1 C Planting/Transplanting IPLTI PLANT 5 C A = Automatic when conditions satisfactory R = On reported date Irrigation and Water Management IIRRI IRRIG 5 C A = Automatic when required N = Not irrigated F = Automatic with fixed amounts at each irrigation date R = On reported dates D = As reported, in days after planting Fertilization IFERI FERTI 5 C A = Automatic when required N = Not fertilized F = Automatic with fixed amounts at each fertilization date R = On reported dates D = As reported, in days after planting Residue applications IRESI RESID 5 C A = Automatic for multiple years/crop sequences N = No applications F = Automatic with fixed amounts at each residue application date R = On reported dates D = As reported, in days after planting Harvest IHARI HARVS 5 C A = Automatic when conditions satisfactory G = At reported growth stage(s) M = At maturity R = On reported date(s) D = On reported days after planting

2 11 1

1

1

1

1

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

25

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

Line 5: Outputs Level number LNSIM Identifier TITOUT Experiment (Y = yes, files named with the experiment code; N = no) IOX General (Y = yes, new; A = append; N = no) Overview IDETO Summary IDETS Details - individual aspects Frequency of output (days) FROP Growth (Y = yes; N = no) IDETG Carbon (Y = yes; N = no) IDETC Water (Y = yes; N = no) IDETW Nitrogen (Y = yes; N = no) IDETN Phosphorous (Y = yes; N = no) IDETP Diseases and other pests (Y = yes; N = no) IDETD Wide (Y) or 80-column (N) daily outputs IDETL

N OUTPUTS

0 I 2 1 C 11

FNAME

5 C 1

OVVEW SUMRY

5 C 1 5 C 1

FROPT GROUT CAOUT WAOUT NIOUT MIOUT

4 5 5 5 5 5

DIOUT

5 C 1

LONG

5 C 1

I C C C C C

Other lines These deal separately with different aspects of automatic management. are only necessary if automatic management is called for. Planting: Level number LNSIM Identifier TITPLA Earliest, year and day of year (YRDOY)PWDINF Latest, year and day of year (YRDOY) PWDINL Lowermost soil water, % SWPLTL Uppermost soil water, % SWPLTH Management depth for water, cm SWPLTD Max. soil temp. (10 cm av.), °C PTX Min. soil temp. (10 cm av.), °C PTTN Irrigation and Water Management: Level number LNSIM Identifier TITIRR Management depth, cm DSOIL Threshold, % of maximum available THETAC End point, % of maximum available IEPT End of applications, growth stage IOFF Method, code IAME Amount per irrigation, if fixed, mm AIRAMT Irrigation application efficiency, fraction EFFIRR

2 1 1 1 1 1

They

N PLANTING PFRST PLAST PH20L PH2OU PH20D PSTMX PSTMN

0 1 1 1 1 1 1 1 1

I C I I R R R R R

2 11 5 5 5 5 5 5 5

N IRRIGATION IMDEP ITHRL ITHRU IROFF IMETH IRAMT

0 1 1 1 1 1 1 1

I C R R R C C R

2 11 5 5 5 5 5 5

IREFF

1 R 5 2

0 0 0 0 0

0 0 0

0

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

26

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

Nitrogen Fertilization: Level number LNSIM Identifier TITNIT Application depth, cm DSOILN Threshold, N stress factor, % SOILNC Amount per application, kg N ha-1 SOILNX Material, code NCODE End of applications, growth stage NEND Residues: Level number LNSIM Identifier TITRES Incorporation percentage, % of remaining RIP Incorporation time, days after harvestNRESDL Incorporation depth, cm DRESMG Harvests: Level number LNSIM Identifier TITHAR Earliest, days after maturity HDLAY Latest, year and day of year (YRDOY) HLATE Percentage of product harvested, % HPP Percentage of residue harvested, % HRP

N NITROGEN NMDEP NMTHR NAMNT NCODE NAOFF

0 1 1 1 1 1 1

I C R R R C C

N RESIDUES

0 I 2 1 C 11

RIPCN RTIME RIDEP

1 R 5 0 1 I 5 1 R 5 0

N HARVESTS HFRST HLAST HPCNP HRCNR

0 1 1 1 1 1

I C I I R R

2 11 5 0 5 0 5 0 5 5

2 11 5 5 5 0 5 0

1

Abbreviations used as variable names in the IBSNAT models.

2

Abbreviations suggested for use in header lines (those designated with ‘@’) within the file.

3

Formats are presented as follows: number of leading spaces, variable type (Character = C, Real = R, Integer = I), variable width, and (if real) number of decimals.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

27

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

EXAMPLES

OF

FIL EX

FOR

VARI OUS EXPE RI MENTS

The examples chosen below commence with the most simple experiment where only a minimum set of data are required and end with a soil fertility simulation experiment where the simulation models require considerably more data. EXPERIMENT 1 (POTENTIAL YIELD )

Users may wish to examine the impact of weather on crop duration and yield potential of two varieties of soybean at two sites with no water, nutrient or pest constraints. For this experiment the only data required in FILEX are the experiment and treatment titles and codes for the variety, soil, a weather data set, planting data and simulation controls. The codes for variety and soil must also be contained in the cultivar and soil files, respectively, so that crop models can obtain the genetic coefficients for the planted variety and the soil inputs for the soil in which the crop was grown. The file name for weather data is required, e.g., UFGA8801.WTH. Alternately, the code for weather data can be specified to construct a file name which contains daily weather data in the DSSAT v3 crop models, e.g., the code UFGA for the weather station would result in the file name of UFGA8801.WTH if the experiment were planted in 1988. An example FILEX for this experiment is given in Table 5 and the required data are highlighted. Note the default settings used in the Simulation Controls section.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

28

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

T ABLE 5. E XAMPLE FILEX FOR A POTENTIAL YIELD E XPERIMENT IN WHICH T HERE A RE T WO V ARIETIES OF S OYBEAN G ROWN IN T WO L OCATIONS. T HE FILE NAME FOR STORING THIS E XPERIMENT INFORMATION WOULD BE UFGA9101.SBX. *EXP.DETAILS: UFGA9101SB SOYBEAN POTENTIAL YIELD, 2 VARIETIES, 2 SITES (EXAMPLE) *GENERAL @PEOPLE A. B. HOWART AND K. T. BARTH @ADDRESS DEPARTMENT OF AGRONOMY, THE UNIVERSITY OF FLORIDA @SITE GAINESVILLE,FLORIDA,ANDHONOLULU,HAWAII @ PAREA PRNO PLEN PLDR PLSP PLAY HAREA HRNO HLEN HARM........... 30.0 4 15.0 0 50 N-S 10.0 10 2.0 Hand Harvest @NOTES Example experiment with 2 varieties at 2 locations. BRAGG and COBB soybeans are planted at Gainesville, Florida in field UFGA0001, weather station UFGA and soil UFGA9101, and planted at Honolulu, Hawaii, in field IBUH0001, weather station IBUH in soil IBUH8801 *TREATMENTS -------------FACTOR LEVELS-----------@N R O C TNAME.................... CU FL SA IC MP MI MF MR MC MT ME MH SM 1 1 0 0 BRAGG AT GAINESVILLE 1 1 0 0 1 0 0 0 0 0 0 0 1 2 1 0 0 BRAGG AT HAWAII 1 2 0 0 1 0 0 0 0 0 0 0 1 3 1 0 0 COBB AT GAINESVILLE 2 1 0 0 1 0 0 0 0 0 0 0 1 4 1 0 0 COBB AT HAWAII 2 2 0 0 1 0 0 0 0 0 0 0 1 *CULTIVARS @C CR INGENO CNAME 1 SB UF0001 BRAGG 2 SB UF0002 COBB *FIELDS @L ID_FIELD WSTA.... FLSA 1 UFGA0001 UFGA 90-N 2 IBUH0001 IBUH 30-N

FLOB FLDT 0 DR001 0 DR001

FLDD 0 0

FLDS 0 0

FLST 0 0

SLTX SA SALO

SLDP ID_SOIL 180 UFGA9101 200 IBUH8801

*PLANTING DETAILS @P PDATE EDATE PPOP 1 91177 30.0

PLME S

PLRS 75

PLRD 0

PLDP 4.0

PLWT -99

PAGE PENV PLPH -99 -99.0 -99.0

PPOE 30.0

PLDS R

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

29

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

*SIMULATION CONTROLS @N GENERAL NYERS 1 1 @N OPTIONS WATER 1 N @N METHODS WTHER 1 M @N MANAGEMENT PLANT 1 R @N OUTPUTS XCODE 1 N @ @N 1 @N 1 @N 1 @N 1 @N 1

NREPS 1 NITRO N INCON M IRRIG N OVVEW Y

START S SYMBI N LIGHT E FERTI N SUMRY Y

SDATE 91177 PHOSP N EVAPO R RESID N FROPT 3

RSEED 2150 POTAS N INFIL S HARVS M GROTH Y

SNAME.................... POTENTIAL YIELD DISES N PHOTO C

AUTOMATIC MANAGEMENT PLANTING PFRST PLAST 155 200 IRRIGATION IMDEP ITHRL 30 50 NITROGEN NMDEP NMTHR 30 50 RESIDUES RIPCN RTIME 100 1 HARVEST HFRST HLAST 0 365

PH2OL 40 ITHRU 100 NAMNT 25 RIDEP 20 HPCNP 100

PH2OU 100 IROFF GS000 NCODE FE001

PH2OD PSTMX PSTMN 30 40 10 IMETH IRAMT IREFF IR001 10 1.00 NAOFF GS000

CARBN WATER NITRO MINER DISES N N N N N

LONG N

HPCNR 0

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

30

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

EXPERIMENT 2 (CLIMATE CHANGE STUDY)

If users wish to determine the effects of a 4°C temperature increase on yield of the crops in Experiment 1 described above, a section on Environmental Modification would be added to FILEX. As shown in Table 6, which illustrates an example FILEX for this experiment, the same 4 treatments from Experiment 1 are included, then 4 additional treatments are specified with the Environmental Modification level set to 1 under the Factor Levels in the Treatments section. In the Environmental Modification section, an entry is made to specify that 4°C is added to both daily minimum and maximum temperatures starting on the day of planting. In this hypothetical experiment, which is to be simulated, there are still no water, nutrient or pest stresses, and the soil water and nitrogen balances are still not used. The settings for the Simulation Controls section remain the same as those given in the example FILEX for “Experiment 1” (Table 5).

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

31

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

T ABLE 6. E XAMPLE FILEX FOR A CLIMATE CHANGE EXPERIMENT IN WHICH MAXIMUM AND MINIMUM DAILY T EMPERATURE A RE R AISED 4 °C, AND T HERE A RE 2 V ARIETIES OF S OYBEAN G ROWN IN T WO L OCATIONS. T HE FILE NAME FOR STORING THIS E XPERIMENT INFORMATION WOULD BE UFGA9102.SBX. *EXP.DETAILS: UFGA9102SB SOYBEAN CLIMATE CHANGE : 2 VARIETIES, 2 SITES (EXAMPLE2) *GENERAL @PEOPLE A. B. HOWART AND K. T. BARTH @ADDRESS DEPARTMENT OF AGRONOMY, THE UNIVERSITY OF FLORIDA @SITE GAINESVILLE,FLORIDA,ANDHONOLULU,HAWAII @ PAREA PRNO PLEN PLDR PLSP PLAY HAREA HRNO HLEN HARM........... 30.0 4 15.0 0 50 N-S 10.0 10 2.0 Hand Harvest @NOTES This is a climate change experiment with 2 varieties at 2 locations Varieties BRAGG and COBB are planted at Gainesville, Florida in field UFGA0001, weather station site UFGA and soil UFGA9101, and at Honolulu, Hawaii, in field IBUH0001, weather station site IBUH in soil IBUH8801. Max. and Min. temperature are increased at 4C. *TREATMENTS -------------FACTOR LEVELS-----------@N R O C TNAME.................... CU FL SA IC MP MI MF MR MC MT ME MH SM 1 1 0 0 BRAGG AT GAINESVILLE 1 1 0 0 1 0 0 0 0 0 0 0 1 2 1 0 0 BRAGG AT HAWAII 1 2 0 0 1 0 0 0 0 0 0 0 1 3 1 0 0 COBB AT GAINESVILLE 2 1 0 0 1 0 0 0 0 0 0 0 1 4 1 0 0 COBB AT HAWAII 2 2 0 0 1 0 0 0 0 0 0 0 1 5 1 0 0 +4 C, BRAGG AT GAINESVILL 1 1 0 0 1 0 0 0 0 0 1 0 1 6 1 0 0 +4 C, BRAGG AT HAWAII 1 2 0 0 1 0 0 0 0 0 1 0 1 7 1 0 0 +4 C, COBB AT GAINESVILLE 2 1 0 0 1 0 0 0 0 0 1 0 1 8 1 0 0 +4 C, COBB AT HAWAII 2 2 0 0 1 0 0 0 0 0 1 0 1 *CULTIVARS @C CR INGENO CNAME 1 SB UF0001 BRAGG 2 SB UF0002 COBB *FIELDS @L ID_FIELD WSTA.... FLSA 1 UFGA0001 UFGA 90-N 2 IBUH0001 IBUH 30-N

FLOB FLDT 0 DR001 0 DR001

FLDD 0 0

FLDS 0 0

FLST 0 0

SLTX SA SALO

SLDP ID_SOIL 180 UFGA9101 200 IBUH8801

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

32

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

*PLANTING DETAILS @P PDATE EDATE PPOP 1 91177 30.0

PPOE PLME PLDS 30.0 S R

PLRS 75

PLRD 0

PLDP 4.0

PLWT -99

PAGE PENV PLPH -99 -99.0 -99.0

*ENVIRONMENTAL MODIFICATIONS @E ODATE EDAY ERAD EMAX EMIN ERAIN ECO2 EDEW EWIND 1 91177 A 0.0 A 0.0 A 4.0 A 4.0 A 0.0 A 0 A 0.0 A 0.0 *SIMULATION CONTROLS @N GENERAL NYERS 1 1 @N OPTIONS WATER 1 N @N METHODS WTHER 1 M @N MANAGEMENT PLANT 1 R @N OUTPUTS FNAME 1 N @ @N 1 @N 1 @N 1 @N 1 @N 1

NREPS 1 NITRO N INCON M IRRIG N OVVEW Y

START S SYMBI N LIGHT E FERTI N SUMRY Y

SDATE 91177 PHOSP N EVAPO R RESID N FROPT 3

RSEED 2150 POTAS N INFIL S HARVS M GROUT Y

SNAME.................... CLIMATE CHANGE SIMULATION DISES N PHOTO C

AUTOMATIC MANAGEMENT PLANTING PFRST PLAST 155 200 IRRIGATION IMDEP ITHRL 30 50 NITROGEN NMDEP NMTHR 30 50 RESIDUES RIPCN RTIME 100 1 HARVEST HFRST HLAST 0 365

PH2OL 40 ITHRU 100 NAMNT 25 RIDEP 20 HPCNP 100

PH2OU 100 IROFF GS000 NCODE FE001

PH2OD PSTMX PSTMN 30 40 10 IMETH IRAMT IREFF IR001 10 1.00 NAOFF GS000

CAOUT WAOUT NIOUT MIOUT DIOUT N N N N N

LONG N

HPCNR 0

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

33

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

EXPERIMENT 3 (IRRIGATION STUDIES)

In this example, one variety of maize is planted on 2 different dates, with and without irrigation in a factorial arrangement. Table 7 shows the corresponding example FILEX with the 4 treatments. Note that there are 2 entries in the Planting section and 2 entries in the Irrigation section since the date for the second planting is different from that of the first planting. Also in this example, there is an Initial Conditions section with initial values of soil water. The “-99” values in the initial NO 3 and NH 4 columns indicate that initial values of soil nitrogen were not taken. Because the soil nitrogen balance is switched off in the Simulation Controls section, this will not affect results. Also note that the water balance is switched on in the Simulation Controls section as indicted by the “Y” under WATER in Options, and that the switch for irrigation management in the Simulation Controls section is “R” under IRRIG in Management, which means that reported field data are to be used in the simulation. Output controls specify that the overview, summary, daily growth, and daily water outputs are to be produced with 3 day intervals.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

34

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

T ABLE 7. E XAMPLE FILEX FOR A M AIZE IRRIGATION E XPERIMENT . T HE FILE NAME FOR S TORING FHIS E XPERIMENT I NFORMATION W OULD B E UFGA8101.MZX. *EXP.DETAILS: UFGA8101MZ MAIZE EXPERIMENT, IRR. AND NON-IRR. (EXAMPLE3) *GENERAL @PEOPLE DR. J. BENNETT @ADDRESS GAINESVILLE, FLORIDA @SITE GAINESVILLE,FL 29.63N;82.37W;40M;SE-USA @ PAREA PRNO PLEN PLDR PLSP PLAY HAREA HRNO HLEN HARM........... 30.0 4 15.0 0 50 N-S 10.0 10 2.0 Hand harvest @NOTES This is a maize irrigation experiment, conducted at Gainesville, Florida, using the variety Pioneer 304C with 4 treatments : 2 irrigation levels and 2 planting dates *TREATMENTS -------------FACTOR LEVELS-----------@N R O C TNAME.................... CU FL SA IC MP MI MF MR MC MT ME MH SM 1 1 0 0 IRRIG, PL-DAY 177 PI304C 1 1 0 1 1 1 0 0 0 0 0 0 1 2 1 0 0 NON-IRR,PL-DAY 177,PIO304 1 1 0 1 1 0 0 0 0 0 0 0 1 3 1 0 0 IRRIG, PL-DAY 195 PI304C 1 1 0 2 2 2 0 0 0 0 0 0 1 4 1 0 0 NON-IRR,PL-DAY 195, PIO30 1 1 0 2 2 0 0 0 0 0 0 0 1 *CULTIVARS @C CR INGENO CNAME 1 MZ UF0001 PI304C *FIELDS @L ID_FIELD WSTA.... FLSA 1 UFGA0001 UFGA 90-N *INITIAL @C PCR 1 SB @C ICBL 1 5 1 15 1 30 1 45 1 60 1 90 1 120 1 150 1 180

CONDITIONS ICDAT ICRT 81177 100 SH2O SNH4 0.086 -99.0 0.086 -99.0 0.086 -99.0 0.086 -99.0 0.086 -99.0 0.076 -99.0 0.076 -99.0 0.130 -99.0 0.258 -99.0

ICND 0 SNO3 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0

FLOB FLDT 0 DR001

ICRN 1.00

FLDD 0

FLDS 0

FLST 0

SLTX LOSA

SLDP ID_SOIL 180 UFGA7701

ICRE 1.00

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

35

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

@C 2 @C 2 2 2 2 2 2 2 2 2

PCR SB ICBL 5 15 30 45 60 90 120 150 180

ICDAT 81195 SH2O 0.070 0.080 0.077 0.080 0.080 0.076 0.055 0.110 0.198

ICRT 100 SNH4 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0

*PLANTING DETAILS @P PDATE EDATE PPOP 1 81177 9.5 2 81195 9.5 *IRRIGATION AND @I IEFF IDEP 1 1.00 30 @I IDATE IROP 1 81204 IR001 1 81211 IR001 1 81227 IR001 1 81239 IR001 1 81249 IR001 @I EFIR IDEP 2 1.00 30 @I IDATE IROP 2 81211 IR001 2 81227 IR001 2 81239 IR001 2 81249 IR001 2 81258 IR001

ICND 0 SNO3 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0

ICRN 1.00

ICRE 1.00

PPOE PLME PLDS 9.5 S R 9.5 S R

WATER MANAGEMENT ITHR IEPT IOFF IAME 50 100 GS000 IR001 IRVAL 19 20 20 20 20 ITHR IEPT IOFF IAME 50 100 IB001 IB001 IRVAL 20 20 20 20 30

*SIMULATION CONTROLS @N GENERAL NYERS 1 1 @N OPTIONS WATER 1 Y @N METHODS WTHER 1 M @N MANAGEMENT PLANT 1 R @N OUTPUTS FNAME 1 N

NREPS 1 NITRO N INCON M IRRIG R OVVEW Y

START S SYMBI N LIGHT E FERTI N SUMRY Y

SDATE 81177 PHOSP N EVAPO R RESID N FROPT 3

PLRS 100 100

PLRD 0 0

PLDP 4.0 4.0

PLWT -99 -99

PAGE PENV PLPH -99 -99.0 -99.0 -99 -99.0 -99.0

IAMT 15

IAMT 15

RSEED 2150 POTAS N INFIL S HARVS M GROUT Y

SNAME.................... MAIZE - IRRIGATION DISES N PHOTO C

CAOUT WAOUT NIOUT MIOUT DIOUT N Y N N N

LONG N

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

36

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

@ @N 1 @N 1 @N 1 @N 1 @N 1

AUTOMATIC MANAGEMENT PLANTING PFRST PLAST 155 200 IRRIGATION IMDEP ITHRL 30 50 NITROGEN NMDEP NMTHR 30 50 RESIDUES RIPCN RTIME 100 1 HARVEST HFRST HLAST 0 365

PH2OL 40 ITHRU 100 NAMNT 25 RIDEP 20 HPCNP 100

PH2OU 100 IROFF GS000 NCODE FE001

PH2OD PSTMX PSTMN 30 40 10 IMETH IRAMT IREFF IR001 10 1.00 NAOFF GS000

HPCNR 0

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

37

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

EXPERIMENT 4 (FERTILIZER

AND

IRRIGATION STUDIES)

In this final example, a maize crop is to be grown with and without irrigation, and with 3 N fertilizer amounts (0, 50, and 100 kg N/ha). In Table 8, the example FILEX shows that Fertilizer and Residue sections have been added. The Residue section has only one entry, which means that all treatments had the same residue management history. In the Fertilizer section, there are 2 entries to specify the 50 and 100 kg N/ha application levels. An entry was not required for the 0 kg N/ ha. Treatments 2, 4, and 6 were not irrigated, as indicated by the 0’s in the MI column, and treatments 1, 3, and 5 all had the same irrigation schedule. For example, Treatment 5 had 50 kg N/ha applied and was irrigated 5 times. In the Simulation Controls section, the water and nitrogen balances were both turned on as indicated by the “Y” under WATER and NITRO in Options. This example does not show a Soil Analysis section, since soil samples were collected from the field for organic carbon, phosphorus, etc., and used to replace the values in the soil file which may have been collected from another site. In this example, recorded data were selected in the Simulation Controls section in Management as shown by the irrigation section switched to “R” under IRRIG. If no irrigation data are available, then the user can select the simulated irrigation management option (“A” or “R”) which are both automatic. If the automatic (“A”) option for fertilizer or irrigation is specified in Management in the Simulation Controls section, then the model determines when management applications for these are made. In that case, the user should specify the set points on when and how much irrigation and/or fertilizer are applied and the method used to apply them.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

38

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

T ABLE 8. E XAMPLE FILEX FOR A MAIZE IRRIGATION AND NITROGEN L EVEL E XPERIMENT . THE FILE NAME FOR STORING THIS EXPERIMENT INFORMATION WOULD BE UFGA8102.MZX. *EXP.DETAILS: UFGA8102MZ MAIZE EXPERIMENT, IRR. AND NITROGEN (EXAMPLE4) *GENERAL @PEOPLE DR. K. J. BOOTE @ADDRESS DEPARTMENT OF AGRONOMY, UNIV. OF FLORIDA, GAINESVILLE @SITE IRRIGATION PARK,GAINESVILLE,FLORIDA 29.63N;82.37W;40M;SE-USA @ PAREA PRNO PLEN PLDR PLSP PLAY HAREA HRNO HLEN HARM........... 60.0 6 10.0 0 100 N-S 20.0 10 2.0 Hand harvest @NOTES This is a maize irrigation experiment, conducted at Gainesville, Florida, using the variety Pioneer 304C with 4 treatments : 2 irrigation levels and 2 planting dates *TREATMENTS -------------FACTOR LEVELS-----------@N R O C TNAME.................... CU FL SA IC MP MI MF MR MC MT ME MH SM 1 1 0 0 IRRIG, 0 N 1 1 0 1 1 1 0 1 0 0 0 0 1 2 1 0 0 NON-IRRIG, 0 N 1 1 0 1 1 0 0 1 0 0 0 0 1 3 1 0 0 IRRIG, 50 KG/HA N 1 1 0 1 1 1 1 1 0 0 0 0 1 4 1 0 0 NON-IRRIG, 50 KG/HA 1 1 0 1 1 0 1 1 0 0 0 0 1 5 1 0 0 IRRIG, 100 KG/HA 1 1 0 1 1 1 2 1 0 0 0 0 1 6 1 0 0 NON-IRRIG, 100 KG/HA 1 1 0 1 1 0 2 1 0 0 0 0 1 *CULTIVARS @C CR INGENO CNAME 1 MZ UF0001 PI304C *FIELDS @L ID_FIELD WSTA.... FLSA 1 UFGA0001 UFGA 90-N *INITIAL @C PCR 1 SB @C ICBL 1 5 1 15 1 30 1 45 1 60 1 90 1 120

CONDITIONS ICDAT ICRT 81177 100 SH2O SNH4 0.086 0.6 0.086 0.6 0.086 0.6 0.086 0.6 0.086 0.6 0.076 0.6 0.076 0.6

ICND 0 SNO3 1.5 1.5 1.5 1.5 1.5 0.6 0.5

FLOB FLDT 0 DR001

ICRN 1.00

FLDD 0

FLDS 0

FLST 0

SLTX LOSA

SLDP ID_SOIL 180 UFGA7701

ICRE 1.00

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

39

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

1 1

150 0.130 180 0.258

0.6 0.6

*PLANTING DETAILS @P PDATE EDATE PPOP 1 81177 9.5

0.5 0.5

PPOE PLME PLDS 9.5 S R

*IRRIGATION AND WATER MANAGEMENT @I IEFF IDEP ITHR IEPT IOFF IAME 1 1.00 30 50 100 IB001 IB001 @I IDATE IROP IRVAL 1 81204 IR001 19 1 81211 IR001 20 1 81227 IR001 20 1 81239 IR001 20 1 81249 IR001 20 *FERTILIZERS (INORGANIC) @F FDATE FMCD FACD FDEP 1 81177 FEO05 APO01 10 2 81177 FEO05 APO01 10

PLRD 0

PLDP 4.0

PLWT -99

FAMO 0 0

FOCD 0 0

FAMK 0 0

FAMC 0 0

*RESIDUES AND OTHER ORGANIC MATERIALS @R RDATE RCOD RAMT RESN RESP RESK 1 81177 RE001 1000 0.80 0.00 0.00

RINP 100

RDEP 15

@ @N 1 @N 1 @N 1 @N 1 @N 1

PAGE PENV PLPH -99 -99.0 -99.0

IAMT 15

FAMP 0 0

*SIMULATION CONTROLS @N GENERAL NYERS 1 1 @N OPTIONS WATER 1 Y @N METHODS WTHER 1 M @N MANAGEMENT PLANT 1 R @N OUTPUTS FNAME 1 N

FAMN 50 100

PLRS 100

NREPS 1 NITRO Y INCON M IRRIG R OVVEW Y

START S SYMBI N LIGHT E FERTI R SUMRY Y

SDATE 81177 PHOSP N EVAPO R RESID R FROPT 3

RSEED 2150 POTAS N INFIL S HARVS M GROUT Y

SNAME.................... MAIZE-IRRIG & NITROGEN DISES N PHOTO C

AUTOMATIC MANAGEMENT PLANTING PFRST PLAST 155 200 IRRIGATION IMDEP ITHRL 30 50 NITROGEN NMDEP NMTHR 30 50 RESIDUES RIPCN RTIME 100 1 HARVEST HFRST HLAST 0 365

PH2OL 40 ITHRU 100 NAMNT 25 RIDEP 20 HPCNP 100

PH2OU 100 IROFF GS000 NCODE FE001

PH2OD PSTMX PSTMN 30 40 10 IMETH IRAMT IREFF IR001 10 1.00 NAOFF GS000

CAOUT WAOUT NIOUT MIOUT DIOUT Y Y Y N N

LONG N

HPCNR 0

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

40

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

W E AT H E R D ATA F I L E Daily weather data are required and must be available for the duration of the growing season, beginning with the day of planting and ending at crop maturity. Ideally, the weather file (FILEW) should contain data collected from before planting to after maturity. This would allow a simulation to be started before planting, thus providing an estimate of soil conditions at planting time. Additional weather data would also allow users to select alternate planting dates, simulate planting decisions based on weather and soil conditions, and simulate longer duration crop cultivars for model sensitivity analysis. These files should be named according to the file naming convention described previously in the section entitled “File Naming Conventions.” The first lines in each weather data file, regardless of file length, contain some details of the site (name, country, annual average temperature and amplitude of its monthly averages, latitude and longitude, elevation). On all subsequent lines, there could be 8 variables, 7 of which are different weather aspects. It is not necessary to have data for all variables, but the minimum data required for DSSAT v3 crop models are solar radiation, minimum and maximum air temperature and rainfall. The standard format for variables should be followed. The structure of the file and an abbreviated example is shown in Table 9. The file as presented is similar to the standard weather data file used by IBSNAT models in DSSAT v2.1 (IBSNAT, 1989), but scope for more variables has been added. The DSSAT v2.1 files only included total solar radiation, maximum and minimum air temperature, and precipitation.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

41

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

T ABLE 9.

WEATHER DATA F ILE. (FILEW)

STRUCTURE Variable

Variable Name 1

Header 2

Format 3

0 1

C 10 C 60

INSTE SITEE XLAT XLONG ELEV TAV

IN SI LAT LONG ELEV TAV

2 0 1 1 1 1

TAMP REFHT WNDHT

AMP TMHT WMHT

1 R 5 1 1 R 5 1 1 R 5 1

YRDOYW SRAD TMAX TMIN RAIN TDEW WINDSP

DATE SRAD TMAX TMIN RAIN DEWP WIND

0 1 1 1 1 1 1

PAR

PAR

1 R 5 1

Line 1 *WEATHER : Site + country name Line 2 Institute code Site code Latitude, degrees (decimals) Longitude, degrees (decimals) Elevation, m Air temperature average, °C Air temperature amplitude, monthly averages, °C Height of temperature measurements, m Height of wind measurements, m All other lines Year + days from Jan. 1 Solar radiation, MJ m -2 day-1 Air temperature maximum, °C Air temperature minimum, °C Precipitation, mm Dewpoint temperature 5, °C Wind run 5, km day -1 Photosynthetic active radiation (PAR)5, moles m -2 day-1

C C R R R R

I R R R R R R

2 2 8 8 5 5

5 5 5 5 5 5 5

3 3 0 1

1 1 1 1 1 1

1

Abbreviations used as variable names in the IBSNAT modelS.

2

Abbreviations suggested for use in header lines (those designated with ‘@’) within the file.

3

Formats are presented as follows: number of leading spaces, variable type (Character = C, Real = R, Integer = I), variable width, and (if real) number of deci mals.

4

The blank space following a weather variable can be used to place a “flag,” which would indicate an estimated value had replaced missing or suspect data. (e.g., UFGAE 29.6 32.6...), where ‘E’ is the “flag” indicating the data item following it (i.e,‘29.6’ ) is an error value. In this example, since no “flag” preceeds the 32.6’, this number is a reported value. (See Appendix D for a full listing of Weather Flags.)



5

Optional data, which are used by crop models for some options but are not necessary.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

42

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

EXAMPLE WEATHER DATA FILE . (FILEW = “UFGA7801.WTH”)

*WEATHER : GAINESVILLE,FLORIDA,U.S.A @ INSI LAT LONG ELEV TAV UFGA 29.630 -82.370 40 20.9 @DATE SRAD TMAX TMIN RAIN 78001 5.3 18.3 13.3 4.8 78002 11.1 18.3 8.3 0.0 78003 14.7 13.9 3.3 0.0 78004 14.4 19.4 0.0 0.0 78005 10.9 23.9 6.7 0.0 78006 10.8 25.6 11.1 0.0 78007 9.5 25.0 9.4 0.0 78008 3.1 23.9 15.6 10.4 78009 16.3 18.3 1.1 25.1 78010 15.7 8.9 -3.9 0.0 78011 15.4 11.7 -2.8 0.0 78012 7.2 19.4 1.7 0.0 78013 10.9 20.0 13.3 27.9 78014 11.4 14.4 3.3 0.0 78015 14.2 7.8 -3.3 0.0 78016 13.2 16.1 -3.9 0.0 78017 10.4 21.7 9.4 4.8 78018 15.0 21.7 6.7 0.0 78019 0.6 19.4 8.9 71.9 78020 4.3 16.7 7.2 6.9 78021 10.4 10.0 1.1 0.0 78022 13.4 16.7 1.1 0.0 78023 6.6 16.7 7.8 0.0 78024 10.7 23.3 5.6 0.0 78025 7.4 26.1 16.7 0.0 78026 17.1 25.6 6.1 5.6 78027 7.4 12.2 0.0 0.0 78028 15.9 11.1 -1.1 0.0 78029 17.4 10.6 -4.4 0.0 78030 16.2 12.2 -3.3 0.0 78031 3.8 12.2 4.4 0.0

AMP REFHT WNDHT 7.4 1.5 2.0

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

43

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

S O I L D ATA F I L E The soil file (FILES) contains data on the soil profile properties. These data are used in the soil water, nitrogen, phosphorus and root growth sections of the crop models. The file generally contains information that is available for the soil at a particular experimental site, and supplementary information extracted from a soil survey database for a soil of the same taxonomic classification as the soil at the experimental site. Occasionally, when a detailed soil analysis has been performed at the experimental site, the file will contain no information from a survey database. In FILES, the first line of data contains the soil identifiers, information on soil texture and depth, a description that could equate to the soil classification according to a specified, locally used system (such as the Canadian soil classification system), and the country. The second line contains geographic data together with taxonomic information presented according to Soil Taxonomy (Soil Survey Staff, 1975). The third line contains information on soil properties that do not vary with depth, such as surface albedo, and on measurement techniques. The fourth line contains data on the first layer; the fifth line on the second layer, and so on for each succeeding layer in the soil profile. The second tier of information for the soil layers is optional and contains variables related to the soil phosphorus balance, and other nutrients. Soil organic carbon is included in this file because it is frequently used to compute other soil properties. The percentage of sand is assumed to be 100 minus the percentages of clay and silt, and thus is not included as an input. The number of layers, and the thickness of each layer should be the same as those in the soil analysis and initial conditions sections of the experiment file whenever possible. The file may contain properties for several soils of the same classification, providing each soil has its own code number. The data for each soil are simply appended to the file. The structure of the file and a truncated example are shown in Table 10. The data in the soils file are arranged so that entries need be made only for the aspects simulated. For example, if only water aspects are to be simulated, only those variables described as physical characteristics need be supplied. If only water and nitrogen aspects are to be simulated, then the physical, N and pH variables need to be entered. If phosphorus is to be considered, then all these latter variables plus all P variables must be entered.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

44

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

T ABLE 10. SOIL D ATA FILE . (FILES) STRUCTURE Variable

Variable Name 1

Header 2

Line 1 *SOILS: Institute + country name

Format 3

0 C 10 1 C 70

Subsequent lines relate to sections, as follows: Line 1 Identifier (Institute + Site + Year + Soil) PEDON Source SLSOUR Texture, code 4 SLTX Depth, cm SLDP Description or local classification SLDESC

ID_SOIL SLSOURCE SLTX SLDP SLDESCRIP

1 2 1 1 1

C C C R C

10 11 5 5 0 50

Line 2 Site name Country name Latitude Longitude Family, SCS system

SSITE SCOUNT SLAT SLONG TACON

SITE COUNTRY LAT LONG SCSFAMILY

1 1 1 1 1

C C R R C

11 11 8 3 8 3 50

SCOM SALB U SWCON

SCOM SALB SLU1 SLDR

1 1 1 1

C R R R

5 5 2 5 0 5 2

CN2 SLNF SLPF SMHB

SLRO SLNF SLPF SMHB

1 1 1 1

R R R C

5 0 5 2 5 2 5

SMPX SMKE

SMPX SMKE

1 C 5 1 C 5

SLB SLMH SLLL SDUL

1 1 1 1

Line 3 Color, moist, Munsell hue Albedo, fraction Evaporation limit, cm Drainage rate, fraction day -1 Runoff curve number (Soil Conservation Service) Mineralization factor, 0 to 1 scale Photosynthesis factor, 0 to 1 scale pH in buffer determination method, code4 Phosphorus, extractable, determination code4 Potassium determination method, code4

Line 4 + (NL-1), where NL = number of layers. (L = Layer number) Depth, base of layer, cm ZLYR(L) Master horizon MH(L) Lower limit, cm 3 cm-3 LL(L) Upper limit, drained, cm 3 cm-3 DUL(L)

R C R R

5 0 5 5 3 5 3

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

45

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

Upper limit, saturated, cm 3 cm-3 Root growth factor, 0.0 to 1.0 Sat. hydraulic conductivity, macropore, cm h-1 Bulk density, moist, g cm -3 Organic carbon, % Clay (2 mm), % Total nitrogen, % pH in water pH in buffer Cation exchange capacity, cmol kg-1

SAT(L) SHF(L)

SSAT SRGF

1 R 5 3 1 R 5 2

SWCN(L) BD(L) OC(L) CLAY(L) SILT(L) STONES(L) TOTN(L) PH(L) PHKCL(L) CEC(L)

SSKS SBDM SLOC SLCL SLSI SLCF SLNI SLHW SLHB SCEC

1 1 1 1 1 1 1 1 1 1

Line 4 + NL to (4 + NL + (NL - 1)), where NL = number (L = Layer number) Depth, base of layer, cm ZZLYR(L) Phosphorus, extractable, mg kg-1 EXTP(L) Phosphorus, total, mg kg -1 TOTP(L) Phosphorus, organic, mg kg -1 ORGP(L) CaCO3 content, g kg -1 CACO(L) Aluminum EXTAL(L) Iron EXTFE(L) Manganese EXTMN(L) Base saturation, cmol kg -1 TOTBAS(L) Phosphorus isotherm A, mmol kg-1 PTERMA(L) Phosphorus iostherm B, mmol kg-1 PTERMB(L) Potassium, exchangeable, cmol kg-1 EXK(L) Magnesium, cmol kg -1 EXMG(L) Sodium, cmol kg -1 EXNA(L) Sulfur EXTS(L) Electric conductivity, seimen SLEC(L)

R R R R R R R R R R

5 5 5 5 5 5 5 5 5 5

1 2 2 1 1 1 2 1 1 1

R R R R R R R R R R R R R R R R

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

of layers. SLB SLPX SLPT SLPO SLCA SLAL SLFE SLMN SLBS SLPA SLPB SLKE SLMG SLNA SLSU SLEC

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1

Abbreviations used as variable names in the IBSNAT models.

2

Abbreviations suggested for use in header lines (those designated with ‘@’) within the file.

3

Formats are presented as follows: number of leading spaces, variable type (Character = C, Real = R, Integer = I), variable width, and (if real) number of decimals.

4

For a complete listing of these codes, see Appendix B.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

46

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

EXAMPLE SOIL DATA FILE. (FILES = “SOIL.SOL”) *SOIL INPUT FILE *IBMZ910014 @SITE Gainesville @ SCOM SALB 99 0.18 @ SLB SLMH 5 -99 15 -99 30 -99 60 -99 90 -99 120 -99 150 -99 180 -99

SCS COUNTRY USA SLU1 SLDR 2.0 0.65 SLLL SDUL 0.026 0.096 0.025 0.086 0.025 0.086 0.025 0.086 0.028 0.090 0.028 0.090 0.029 0.130 0.070 0.258

FSA

180 Millhopper Fine Sand LAT LONG SCS FAMILY 29.63 -82.37 Loamy,silic,hyperth Arenic Paleudult ( 14) SLRO SLNF SLPF SMHB SMPX SMKE 60.0 1.00 0.80 SA001 SA001 SA001 SSAT SRGF SSKS SBDM SLOC SLCL SLSI SLCF SLNI SLHW SLHB 0.230 1.000 -99 1.30 2.00 -99 -99 -99 -99 -99 -99 0.230 1.000 -99 1.30 1.00 -99 -99 -99 -99 -99 -99 0.230 0.800 -99 1.40 1.00 -99 -99 -99 -99 -99 -99 0.230 0.200 -99 1.40 0.50 -99 -99 -99 -99 -99 -99 0.230 0.100 -99 1.45 0.10 -99 -99 -99 -99 -99 -99 0.230 0.050 -99 1.45 0.10 -99 -99 -99 -99 -99 -99 0.230 0.002 -99 1.45 0.04 -99 -99 -99 -99 -99 -99 0.360 0.000 -99 1.20 0.24 -99 -99 -99 -99 -99 -99

SCEC -99 -99 -99 -99 -99 -99 -99 -99

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

47

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

GENOTYPE Three files are suggested for dealing with the morphological and physiological characteristics of a particular genotype: one for the specific species (crop) characteristics (FILEG), one for the “ecotype” characteristics within a species (FILEE), and one for the specific cultivar characteristics within an ecotype grouping (FILEC). These files would contain all genotype specific inputs required for simulation. Their content and organization, and indeed their usage, currently vary greatly among crop models and crops. No attempt has been made, therefore, to document contents. The use of at least one genotype file, specifically FILEC, is highly recommended. For such a file, a standard format is recommended with each line beginning with 6 spaces for a cultivar identification code (the first two items should be the code for the Institute that assigned the number), a blank, 16 spaces for the cultivar name, a blank, 6 spaces for a type identifier (e.g., an identifier for highland or lowland bean ecotypes), and then data in a (1X, F5.?) format (i.e., 1 blank, followed by 5 spaces for a real variable with the required number of decimals).

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

48

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

CHAPTER FOUR. O UT PU T S A number of output files for each simulation run, which may encompass several experiments, are described in Table 1. The first output file, OVERVIEW.OUT (Table 11), provides an overview of input conditions and crop performance, and a comparison with actual data if available. The first section in this file presents information that uniquely describes the simulated data set, as described below. Line 1: Run number and description; default to experiment code and name plus treatment number and name Line 2: Model name and version Line 3: Experiment name, Institute code, Site code, Experiment no., Crop (group) code Line 4: Treatment number and specifications Line 5: Crop, cultivar, ecotype Line 6: Simulation starting date Line 7: Planting date, population, and row spacing Line 8: Weather location, site and year Line 9: Soil number, texture and family Line 10: Soil initial conditions Line 11: Water balance Line 12: Irrigation Line 13: Nitrogen balance Line 14: Fertilizer N applications Line 15: Residue applications Line 16: Environmental options Line 17: Simulation options Line 18: Management options The second section contains a summary of soil characteristics and cultivar coefficients. The next section deals with the crop and soil status at the main developmental stages, followed by a comparison of simulated and measured data for major variables. This in turn is followed by information on simulated stress factors and weather data summary during the different developmental phases (as

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

49

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

appropriate to the crop). An example of the file is shown in Table 11. The second output file, SUMMARY.OUT (Table 12), provides a summary of outputs for use in applications programs with one line of data for each crop season. The third to last files contain detailed simulation results, including simulated seasonal (at daily or less frequent intervals) growth and development (Table 13), carbon balance (Table 14), water balance (Table 15), nitrogen balance (Table 16), phosphorus balance and pest (Table 17) aspects. These files are included for detailed graphic and numerical comparisons of simulated results with data collected periodically during a growing season. They can be saved in files named according to the code of the first experiment in the simulation session, but with a final letter to indicate the aspect dealt with in the file. All of the above output files are set up so that successive simulated results in one session are appended to the respective files. The output files are temporary information transfer files, created during simulation, and they are overwritten when a new simulation session is started. The output files can include additional information such as may relate to parameter changes for sensitivity analysis. However, the symbol “!” should be put in column 1 when such additional information is included in the output files. The “!” symbol designates a comment and graphics and other analysis programs must be designed to ignore these lines.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

50

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

T ABLE 11. E XAMPLE

OF THE

SIMULATION OVERVIEW FILE. (OUT0)

*SIMULATION OVERVIEW FILE *RUN 1 MODEL EXPERIMENT TREATMENT 1 CROP STARTING DATE PLANTING DATE WEATHER SOIL SOIL INITIAL C WATER BALANCE IRRIGATION NITROGEN BAL. N FERTILIZER RESIDUE/MANURE ENVIRONM. OPT.

: : : :

IRRIGATED, COBB CRGRO940 - SOYBEAN UFGA8101 SB COBB, IRRIGATED, VEG. & REPROD. STRESS IRRIGATED, COBB

: : : : : : : : : : : :

SOYBEAN CULTIVAR : COBB - MATURITY GROUP 8 JUN 26 1981 JUN 26 1981 PLANTS/m2 : 35.9 ROW SPACING : 76.cm UFGA 1981 IBSB910015 TEXTURE : - Millhopper Fine Sand DEPTH:180cm EXTR. H2O:158.4mm NO3: .0kg/ha NH4: .0kg/ha IRRIGATE ACCORDING TO FIELD SCHEDULE 315 mm IN 19 APPLICATIONS SOIL-N, N-UPTAKE & DYNAMIC N-FIXATION SIMULATION 0 kg/ha IN 0 APPLICATIONS 0 kg/ha IN 0 APPLICATIONS DAYL= .0 SRAD= .0 TMAX= .0 TMIN= .0 RAIN= .0 CO2 = R 330.0 DEW = .0 WIND= .0 SIMULATION OPT : WATER :Y NITROGEN:Y N-FIX:Y PESTS :N PHOTO :C ET :R MANAGEMENT OPT : PLANTING:R IRRIG :R FERT :R RESIDUE:R HARVEST:M WTH:M

*SUMMARY OF SOIL AND GENETIC INPUT PARAMETERS SOIL LOWER UPPER SAT EXTR INIT ROOT BULK pH NO3 NH4 ORG DEPTH LIMIT LIMIT SW SW SW DIST DENS C cm cm3/cm3 cm3/cm3 cm3/cm3 g/cm3 ugN/g ugN/g % -------------------------------------------------------------------------------0- 5 .023 .086 .230 .063 .086 1.00 1.36 5.30 .00 .00 .90 5- 15 .023 .086 .230 .063 .086 1.00 1.40 5.40 .00 .00 .69 15- 30 .023 .086 .230 .063 .086 .50 1.46 5.70 .00 .00 .28 30- 45 .023 .086 .230 .063 .086 .29 1.47 5.80 .00 .00 .20 45- 60 .023 .086 .230 .063 .086 .29 1.47 5.80 .00 .00 .20 60- 90 .021 .076 .230 .055 .076 .38 1.43 5.90 .00 .00 .09 90-120 .020 .076 .230 .056 .076 .13 1.48 5.90 .00 .00 .03 120-150 .027 .130 .230 .103 .130 .06 1.57 5.90 .00 .00 .03 150-180 .070 .258 .360 .188 .258 .03 1.79 5.90 .00 .00 .03 TOT-180 5.5 21.4 45.3 SOIL ALBEDO : .18 RUNOFF CURVE # :66.00

15.8 21.4 EVAPORATION LIMIT : 5.00 DRAINAGE RATE : .50

.0 .0 38949 MIN. FACTOR : 1.00 FERT. FACTOR : .84

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

51

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

SOYBEAN CULTIVAR :IB0002-COBB CSDVAR :12.25 PPSEN : .33 EMG-FLW:21.00 WTPSD : .180 SDPDVR : 2.05 SDFDUR :23.00

ECOTYPE :SB0801-MATURITY GROUP 8 FLW-FSD:16.00 FSD-PHM :37.00 PODDUR :15.00 XFRUIT : 1.00

*SIMULATED CROP AND SOIL STATUS AT MAIN DEVELOPMENT STAGES RUN NO.

1

IRRIGATED, COBB

DATE CROP GROWTH BIOMASS LAI LEAF ET RAIN IRRIG SWATER CROP N STRESS AGE STAGE kg/ha NUM. mm mm mm mm kg/ha % H2O N -------------------------------------------------------------------------------26 JUN 0 START SIM 0 .00 .0 4 18 0 172 0 .0 .00 .00 26 JUN 0 SOWING 0 .00 .0 4 18 0 172 0 .0 .00 .00 29 JUN 3 EMERGENCE 25 .04 .0 5 19 0 162 1 5.1 .00 .00 29 JUN 3 END JUVEN. 25 .04 .0 5 19 0 162 1 5.1 .00 .00 7 JUL 11 UNIFOLIATE 81 .13 1.3 13 19 8 158 3 3.4 .00 .00 11 JUL 15 FLOWER IND 143 .25 2.3 25 41 8 161 4 3.0 .07 .00 11 AUG 46 FIRST FLWR 2630 4.45 11.1 165 141 85 157 96 3.7 .02 .00 27 AUG 62 FIRST POD 4320 5.41 15.5 230 165 142 157 153 3.6 .00 .00 27 AUG 62 FIRST POD 4320 5.41 15.5 230 165 142 157 153 3.6 .00 .00 29 AUG 64 END MSNODE 4337 5.20 16.1 235 192 142 180 155 3.6 .00 .00 5 SEP 71 END LEAF 5163 5.06 16.1 265 219 142 147 175 3.4 .00 .00 7 SEP 73 FIRST SEED 5355 4.96 16.1 272 221 157 153 179 3.3 .00 .00 8 OCT 104 END POD 7978 3.30 16.1 397 248 272 142 269 3.4 .00 .00 18 OCT 114 PHYS. MAT 8658 3.03 16.1 429 250 287 124 302 3.5 .00 .04 30 OCT 126 HARV. MAT 7340 .20 16.1 456 268 315 134 264 3.6 .00 .16 30 OCT 126 HARVEST 7340 .20 16.1 456 268 315 134 264 3.6 .00 .16

*MAIN GROWTH AND DEVELOPMENT VARIABLES @

VARIABLE -------ANTHESIS DATE (DAP) FIRST PEG / POD (DAP) FIRST SEED (DAP) PHYSIOLOGICAL MATURITY (DAP) POD YIELD (kg/ha) SEED YIELD (kg/ha) SHELLING PERCENTAGE (%) WEIGHT PER SEED (g) SEED NUMBER (SEED/m2) SEEDS/POD MAXIMUM LAI (m2/m2) BIOMASS (kg/ha) AT ANTHESIS BIOMASS N (kg N/ha) AT ANTHESIS

PREDICTED --------46 62 73 114 4545 3575 78.65 .165 2166 2.05 5.41 2630 96

MEASURED -------47 66 66 118 4526. 3502. -99 .1476 2374. 1.88 6.25 -99 -99

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

52

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

BIOMASS (kg/ha) AT HARVEST MAT. STALK (kg/ha) AT HARVEST MAT. HARVEST INDEX (kg/kg) FINAL LEAF NUMBER (MAIN STEM) SEED N (kg N/ha BIOMASS N (kg N/ha) STALK N (kg N/ha) SEED N (%)

7340 2712 .487 16.10 228 264 21 6.37

6851. 2137. -99 -99 -99 -99 -99 -99

*ENVIRONMENTAL AND STRESS FACTORS -----------------------------ENVIRONMENT—----------------------STRESS---------|--DEVELOPMENT PHASE--|-TIME-|-------WEATHER--------| |---WATER--| |-NITROGEN-| DURA TEMP TEMP SOLAR PHOTOP PHOTO GROWTH PHOTO GROWTH TION MAX MIN RAD [day] SYNTH SYNTH days oC oC MJ/m2 hr ------------------------------------------------------------------------------Emergence -First Flower 43 34.07 22.26 20.01 13.60 .000 .019 .000 .000 First Flower-First Seed 27 32.41 21.98 16.30 12.80 .000 .000 .000 .000 First Seed - Phys. Mat. 41 30.87 17.54 16.38 11.78 .000 .000 .049 .009 Emergence - Phys. Mat. 111 32.48 20.45 17.77 12.73 .000 .007 .018 .003 (0.0 = Minimum Stress 1.0 = Maximum Stress)

SOYBEAN

YIELD :

3575 kg/ha

[DRY WEIGHT]

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

53

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

T ABLE 12. DETAILED SIMULATION SUMMARY O UTPUT F ILE. (OUTS) STRUCTURE Variable Line 1 *SUMMARY : Institute code Site code Experiment code Crop group code Experiment name

Variable Name 1 Header 2

INSTE SITEE EXPTNO CROP ENAME

Format 3

0 1 0 0 1 1

C C C C C C

10 2 2 4 2 60

Line 2 to number runs made. Details of each simulation run, as follows: Run number RUNO RP 0 I 2 Treatment number TRTNO TN 1 I 2 Rotation component ROTNO R 1 I 1 Rotation option ROTOPT O 0 I 1 Crop component CRPNO C 0 I 1 Crop code CROP CR 1 C 2 Title TITLET TNAM 1 C 19 Field identifier FLDNAM FNAM 1 C 8 Simulation start date, year + day of year YRSIM SDAT 1 I 5 Planting date, year + day of year YRPLT PDAT 1 I 5 Anthesis date, start, year + day of year YRNR1 ADAT 1 I 5 Maturity (physiological) date, year+day of year YRNR7 MDAT 1 I 5 Harvest date, year + day of year YRDOY HDAT 1 I 5 Planting material dry weight, kg ha-1 SDRATE DWAP 1 I 5 Canopy dry weight at maturity, kg ha-1 TOPWT CWAM 1 I 5 Yield at maturity, kg ha -1 SDWT HWAM 1 I 5 Yield at harvest, kg ha -1 SDWTAM HWAH 1 I 5 Harvested byproduct dry weight, kg ha-1 BWAH BWAH 1 I 5 Harvest product individual dry wt., mg or g HWUM HWUM 1 I 5 Harvest product number per m 2 at maturity SEEDNO H#AM 1 I 5 Harvest product number per unit at maturity PSPP H#UM 1 R 5 2 Irrigation applications, number NAP IR#M 1 I 5 Irrigation applied, cumulative, mm TOTIR IRCM 1 I 5 Precipitation cumulative, mm CRAIN PRCM 1 I 5 Evapotranspiration in season, cumulative, mm CET ETCM 1 I 5 Runoff, cumulative, mm TRUNOF ROCM 1 I 5 Cumulative drainage from profile, mm TDRAIN DRCM 1 I 5 Water remaining in soil, available, mm PESW SWXM 1 I 5 Nitrogen applications, number NAPNIT NI#M 1 I 5 Nitrogen applied, cumulative, kg ha-1 AMTNIT NICM 1 I 5

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

54

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

Nitrogen fixed, cumulative, kg ha-1 Total N uptake during season, kg/ha Nitrogen leached, cumulative, kg ha-1 Inorganic N in soil at maturity, kg/ha Tops N at maturity, kg ha -1 Nitrogen in harvest product (seed), kg ha-1 Residue, etc. applied, cumulative, kg ha-1 Soil organic N at end of season, kg ha-1 Soil C at end of season, t ha -1 Number of phosphorus applications Total P applied during season, kg/ha Cumulative plant P uptake, kg/ha Soil P at end of season, kg/ha

WTNFX WTNUP TLCH TSIN WTNCAN WTNSD CRESAP TSON TSOC NNAPHO TOTPH TOTPUP TPLEFT

NFXM NUCM NLCM NIAM CNAM GNAM RECM ONAM OCAM PO#M POCM CPAM SPAM

1 1 1 1 1 1 1 1 1 1 1 1 1

I I I I I I I I I I I I I

5 5 5 5 5 5 5 5 5 5 5 5 5

1

Abbreviations used as variable names in the IBSNAT models.

2

Abbreviations suggested for use in header lines (those designated with ‘@’) within the file.

3

Formats are presented as follows: number of leading spaces, variable type (Character = C, Real = R, Integer = I), variable width, and (if real) number of decimals.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

55

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

E XAMPLE SUMMARY OUTPUT F ILE *SUMMARY : UFGA8101 SB COBB, IRRIGATED, VEG. & REPROD. STRESS !IDENTIFIERS.............................. @RP TN ROC CR TNAM FNAM 1 1 110 SB IRRIGATED, COBB UFGA0001 2 2 110 SB IRRIGATED, WITH VEG UFGA0001 3 3 110 SB IRRIGATED, WITH REP UFGA0001 1 1 110 SB IRRIGATED UFGA0001 2 2 110 SB NON - IRRIGATED UFGA0001

DATES......................... SDAT PDAT ADAT MDAT HDAT 81177 81177 81223 81291 81303 81177 81177 81224 81293 81305 81177 81177 81223 81291 81303 78166 78166 78211 78282 78294 78166 78166 78211 78278 78290

DRY WEIGHTS.................................... DWAP CWAM HWAM HWAH BWAH HWUM H#AM H#UM 81 7340 3575 3575 3765 165 2166 2.05 81 6178 3174 3174 3004 157 2021 2.05 81 7038 3389 3389 3649 159 2126 2.05 75 6116 2962 2962 3153 134 2208 2.05 75 3056 1139 1139 1917 145 784 2.05

WATER.................................... IR#M IRCM PRCM ETCM ROCM DRCM SWXM 19 315 268 456 0 72 134 13 206 269 424 0 36 121 15 264 268 448 0 72 104 19 190 534 440 31 290 74 0 0 534 319 31 284 59

NITROGEN....................................... NI#M NICM NFXM NUCM NLCM NIAM CNAM GNAM 0 0 352 2 0 32 264 228 0 0 322 1 0 29 234 202 0 0 342 1 0 31 252 216 0 0 314 4 20 39 222 189 0 0 204 2 20 37 96 73

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

56

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

ORGANIC MATTER... PHOSPHORUS............ RECM ONAM OCAM PO#M POCM CPAM SPAM 0 3870 39 0 0 0 0 0 3873 39 0 0 0 0 0 3873 39 0 0 0 0 1000 3838 39 0 0 0 0 1000 3842 39 0 0 0 0

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

57

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

T ABLE 13. DETAILED SIMULATION GROWTH O UTPUT F ILE. (OUTG) STRUCTURE Variable

Variable Name 1

Line 1 Run number 4 Run identifier Line 2 Model name Crop name Line 3 Experiment identifier, made up of: Institute code Site code Experiment number/abbreviation Crop group code Experiment name (Treatment set and experimental condition names, separated by a semi-colon) Line 4 Treatment number Treatment name

Header2 Format3

NREP TITLER

5 I 1 0 C

3 25

MODEL CROPD

18 3

C C

8 10

INSTE SITEE EXPTNO CROP

18 0 0 1

C C C C

2 2 4 2

ENAME

18

C

60

TRTNO TITLET

11 5

I C

2 25

1

C

77+

1 1 1 1 1 1 1 1 1 1 1 1 1

I I R I R I I I I I I R R

5 5 5 5 5 5 5 5 5 5 5 5 5

Line 5 5 Variable abbreviations Line 6 on Date (Year + days from Jan. 1) Crop age (days from planting) Leaf number Growth stage Leaf area index Leaf dry weight, kg ha -1 Stem dry weight, kg ha -1 Grain dry weight, kg ha -1 Root dry weight in layer L, kg ha -1 Crop dry weight, kg ha- 1 Grain number, #/m2 Grain dry weight, mg/grain Harvest index

YRDOY DAP VSTAGE RSTAGE XLAI WTLF STMWT SDWT RTWT TOPWT SEEDNO SDSIZE HI

DATE CDAY L#SD GSTD LAID LWAD SWAD GWAD RWAD CWAD G#AD GWGD HIAD

1 2

1 3

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

58

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

1

Abbreviations used as variable names in the IBSNAT models.

2

Abbreviations suggested for use in header lines (those designated with ‘@’) within the file. They correspond to the variable names used in the associated database.

3

Formats are presented as follows: number of leading spaces, variable type (Character = C, Real = R, Integer = I), variable width, and (if real) number of decimals.

4

Each new run should be demarcated with ‘*RUN’ at the beginning of this line in each file.

5

Additional information can be placed between lines 4 and 5, as required by a user, as illustrated in the example, and as documented for the Overview file in the text.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

59

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

E XAMPLE G ROWTH OUTPUT F ILE *GROWTH ASPECTS OUTPUT FILE *RUN 1 MODEL EXPERIMENT TREATMENT 1

: : : :

CROP STARTING DATE PLANTING DATE WEATHER SOIL SOIL INITIAL C WATER BALANCE IRRIGATION NITROGEN BAL. N FERTILIZER RESIDUE/MANURE ENVIRONM. OPT.

IRRIGATED, COBB CRGRO940 - SOYBEAN UFGA8101 SB COBB, IRRIGATED, VEG. & REPROD. STRESS IRRIGATED, COBB

SOYBEAN CULTIVAR : COBB - MATURITY GROUP 8 JUN 26 1981 JUN 26 1981 PLANTS/m2 : 35.9 ROW SPACING : 76.cm UFGA 1981 IBSB910015 TEXTURE : - Millhopper Fine Sand DEPTH:180cm EXTR. H2O:158.4mm NO3: .0kg/ha NH4: .0kg/ha IRRIGATE ACCORDING TO FIELD SCHEDULE 315 mm IN 19 APPLICATIONS SOIL-N, N-UPTAKE & DYNAMIC N-FIXATION SIMULATION 0 kg/ha IN 0 APPLICATIONS 0 kg/ha IN 0 APPLICATIONS DAYL= .0 SRAD= .0 TMAX= .0 TMIN= .0 RAIN= .0 CO2 = R 330.0 DEW = .0 WIND= .0 SIMULATION OPT : WATER :Y NITROGEN:Y N-FIX:Y PESTS :N PHOTO :C ET :R MANAGEMENT OPT : PLANTING:R IRRIG :R FERT :R RESIDUE:R HARVEST:M WTH:M

@DATE 81177 81183 81189 81195 81201 81207 81213 81219 81225 81231 81237 81243 81249 81255 81261 81267 81273 81279

CDAY 0 6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102

: : : : : : : : : : : :

L#SD .0 .4 1.6 3.1 4.9 6.5 8.2 9.9 11.7 13.4 15.0 16.1 16.1 16.1 16.1 16.1 16.1 16.1

GSTD 0 0 0 0 0 0 0 0 1 1 1 3 3 5 5 5 5 5

LAID .00 .07 .16 .40 .95 1.75 2.82 3.84 4.73 5.32 5.39 5.15 4.99 4.71 4.31 3.97 3.63 3.37

LWAD 0 35 77 173 313 533 801 1080 1325 1540 1618 1658 1760 1799 1699 1578 1425 1318

SWAD 0 6 15 46 134 324 613 1047 1560 2078 2473 2859 3303 3625 3648 3523 3315 3182

GWAD 0 0 0 0 0 0 0 0 0 0 0 0 0 34 298 777 1544 2331

RWAD 0 23 44 98 192 381 567 753 905 1051 1161 1264 1366 1437 1429 1402 1333 1280

CWAD 0 41 92 219 447 858 1414 2127 2885 3619 4091 4533 5232 5897 6425 6901 7364 7868

G#AD GWGD 0 .0 0 .0 0 .0 0 .0 0 .0 0 .0 0 .0 0 .0 0 .0 0 .0 0 .0 0 .0 0 .0 403 8.4 950 31.4 1453 53.5 2106 73.3 2166 107.6

HIAD .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .006 .046 .113 .210 .296

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

60

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

T ABLE 14. DETAILED SIMULATION C ARBON B ALANCE O UTPUT FILE . (OUTC) STRUCTURE Variable

Variable Name1 Header 2

Format 3

Line 1 Run number 4 Run identifier

NREP TITLER

5 I 10 C

3 25

Line 2 Model name Crop name

MODEL CROPD

18 C 3 C

8 10

INSTE SITEE EXPTNO CROP

18 0 0 1

2 2 4 2

ENAME

18 C

60

TRTNO TITLET

11 I 5 C

2 25

1 C

77+

1 1 1 1 1 1 1 1 1 1 1 1 1

5 5 5 5 5 5 5 5 5 5 5 5 5

Line 3 Experiment identifier, made up of: Institute code Site code Experiment number/abbreviation Crop group code Experiment name (Treatment set and experimental condition names, separated by a semi-colon) Line 4 Treatment number Treatment name Line 5 5 Variable abbreviations Line 6 on Date (Year + days from Jan. 1) Days from planting Soil organic carbon, kg ha -1 Total plant weight, kg ha -1 Canopy interception of PAR, % Canopy gross photosynthesis, g CH2O/m 2/d Carbon mobilized for growth, g CH 2O/m 2/d Canopy growth rate, g tissue/m 2/d Canopy growth resp, g CH 2O/m 2/d Canopy maint resp, g CH 2O/m 2/d C stored in a day, g CH2O/m 2/d Percent C in leaf, % Percent C in stem, %

YRDOY DAP TSOC TOTWT PCINP PG CMINEA GROWTH GRWRES MAINR CAD RHOL RHOS

DATE CDAY SOCD TWAD LI%D PHAD CMAD CGRD GRAD MRAD CHAD CL%D CS%D

C C C C

I I I I R R R R R R R R R

2 2 2 2 2 2 2 2 2

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

61

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

1

Abbreviations used as variable names in the IBSNAT models.

2

Abbreviations suggested for use in header lines (those designated with ‘@’) within the file. They correspond to the variable names used in the associated database.

3

Formats are presented as follows: number of leading spaces, variable type (Character = C, Real = R, Integer = I), variable width, and (if real) number of decimals.

4

Each new run should be demarcated with ‘*RUN’ at the beginning of this line in each file.

5

Additional information can be placed between lines 4 and 5, as required by a user, as illustrated in the example, and as documented for the Overview file in the text.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

62

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

E XAMPLE CARBON O UTPUT FILE *CARBON BALANCE OUTPUT FILE *RUN 1 MODEL EXPERIMENT TREATMENT 1

: : : :

CROP STARTING DATE PLANTING DATE WEATHER SOIL SOIL INITIAL C WATER BALANCE IRRIGATION NITROGEN BAL. N FERTILIZER RESIDUE/MANURE ENVIRONM. OPT.

IRRIGATED, COBB CRGRO930 - SOYBEAN UFGA8101 SB COBB, IRRIGATED, VEG. & REPROD. STRESS IRRIGATED, COBB

SOYBEAN CULTIVAR : COBB - MATURITY GROUP 8 JUN 26 1981 JUN 26 1981 PLANTS/m2 : 35.9 ROW SPACING : 76.cm FGA 1981 IBSB910015 TEXTURE : - Millhopper Fine Sand DEPTH:180cm EXTR. H2O:158.4mm NO3: .0kg/ha NH4: .0kg/ha IRRIGATE ACCORDING TO FIELD SCHEDULE 315 mm IN 19 APPLICATIONS SOIL-N, N-UPTAKE & DYNAMIC N-FIXATION SIMULATION 0 kg/ha IN 0 APPLICATIONS 0 kg/ha IN 0 APPLICATIONS DAYL= .0 SRAD= .0 TMAX= .0 TMIN= .0 RAIN= .0 CO2 = R 330.0 DEW = .0 WIND= .0 SIMULATION OPT : WATER :Y NITROGEN:Y N-FIX:Y PESTS :N PHOTO :C ET :R MANAGEMENT OPT : PLANTING:R IRRIG :R FERT :R RESIDUE:R HARVEST:M WTH:M

@DATE 81177 81183 81189 81195 81201 81207 81213 81219 81225 81231 81237 81243 81249 81255 81261 81267 81273 81279 81285 81291 81297

CDAY 0 6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120

: : : : : : : : : : : :

SOCD 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39

TWAD 0 64 136 317 638 1238 1981 2880 3789 4670 5252 5797 6598 7334 7854 8304 8697 9148 9393 9860 8922

LI%D .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00

PHAD .00 1.25 2.81 6.96 12.21 21.69 24.45 29.19 28.61 28.54 31.56 28.12 24.16 32.67 31.39 28.86 29.56 27.81 23.47 20.92 5.92

CMAD .00 .00 .00 .00 .28 .32 .37 .45 .55 .76 1.00 1.38 1.99 2.70 3.11 2.99 2.18 1.84 1.34 .00 1.97

CGRD GRAD .00 .00 .57 .34 1.34 .79 3.29 1.96 7.40 3.75 12.36 6.77 14.46 6.91 17.39 7.99 16.32 7.60 15.15 7.17 16.14 8.17 13.45 6.64 11.82 4.98 17.69 6.55 19.23 8.03 16.24 8.33 14.43 9.89 13.59 10.00 11.40 8.67 2.93 2.05 2.33 1.05

MRAD CHAD .00 .00 .13 .21 .32 .35 .80 .91 1.34 .00 2.88 .00 3.44 .00 4.26 .00 4.77 .47 5.58 1.40 5.44 2.81 5.90 3.52 6.27 3.08 7.48 3.66 5.14 2.10 7.29 .00 7.26 .15 5.58 .49 4.41 .34 5.48 10.46 3.88 .63

CL%D .00 20.39 29.76 34.23 21.66 12.12 7.96 5.88 4.84 4.78 5.16 5.87 6.79 7.26 7.11 6.10 5.02 4.12 3.04 3.56 1.12

CS%D .00 21.35 27.58 26.99 15.14 9.59 7.74 6.86 6.75 8.30 10.40 12.99 16.00 17.61 17.31 14.90 12.28 10.21 7.65 9.62 18.71

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

63

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

T ABLE 15. DETAILED SIMULATION W ATER BALANCE OUTPUTF ILE. (OUTW) STRUCTURE Variable

Variable Name1 Header 2

Format 3

Line 1 Run number 4 Run identifier

NREP TITLER

5 10

I C

3 25

Line 2 Model name Crop name

MODEL CROPD

18 3

C C

8 10

INSTE SITEE EXPTNO CROP

18 0 0 1

C C C C

2 2 4 2

ENAME

18

C

60

TRTNO TITLET

11 5

I C

2 25

1

C

77+

1 1 1 1 1 1 1 1 1 1 1 1 1

I I R R R R R I I I R R R

5 5 5 5 5 5 5 5 5 5 5 5 5

Line 3 Experiment identifier, made up of: Institute code Site code Experiment number/abbreviation Crop group code Experiment name (Treatment set and experimental condition names, separated by a semi-colon) Line 4 Treatment number Treatment name Line 5 5 Variable abbreviations Line 6 on Date (Year + days from Jan. 1) Days from planting Plant Transpiration, mm d-1 Evapotranspiration, mm day -1 Potential evaporation, mm day -1 Potentially extractable water, cm Cumulative runoff Cumulative drainage Cumulative precipitation, mm Cummulative irrigation, mm Average solar radiation, MJ m -2 Average maximum temperature, °C Average minimum temperature, °C

YRDOY DAP AVEP AVET AVEO PESW TRUNOF TDRAIN CRAIN TOTIR AVSRAD AVTMX AVTMN

DATE CDAY EPAA ETAA EOAA SWXD ROFC DRNC PREC IRRC SRAA TMXA TMNA

2 2 2 1 1

1 1 1

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

64

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

1

Abbreviations used as variable names in the IBSNAT models.

2

Abbreviations suggested for use in header lines (thoses designated with '@') within the file. They correspond to the variable names used in the associated database.

3

Formats are presented as follows: number of leading spaces, variable type (Character = C, Real = R, Integer = I), variable width, and (if real) number of decimals.

4

Each new run should be demarcated with '*RUN' at the beginning of this line in each file.

5

Additional information can be placed between lines 4 and 5, as required by a user, as illustrated in the example, and as documented for the Overview file in the text.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

65

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

E XAMPLE WATER O UTPUT FILE *WATER BALANCE OUTPUT FILE *RUN 1 MODEL EXPERIMENT TREATMENT 1

: : : :

CROP STARTING DATE PLANTING DATE WEATHER SOIL SOIL INITIAL C WATER BALANCE IRRIGATION NITROGEN BAL. N FERTILIZER RESIDUE/MANURE ENVIRONM. OPT.

IRRIGATED, COBB CRGRO940 - SOYBEAN UFGA8101 SB COBB, IRRIGATED, VEG. & REPROD. STRESS IRRIGATED, COBB

SOYBEAN CULTIVAR : COBB - MATURITY GROUP 8 JUN 26 1981 JUN 26 1981 PLANTS/m2 : 35.9 ROW SPACING : 76.cm UFGA 1981 IBSB910015 TEXTURE : - Millhopper Fine Sand DEPTH:180cm EXTR. H2O:158.4mm NO3: .0kg/ha NH4: .0kg/ha IRRIGATE ACCORDING TO FIELD SCHEDULE 315 mm IN 19 APPLICATIONS SOIL-N, N-UPTAKE & DYNAMIC N-FIXATION SIMULATION 0 kg/ha IN 0 APPLICATIONS 0 kg/ha IN 0 APPLICATIONS DAYL= .0 SRAD= .0 TMAX= .0 TMIN= .0 RAIN= .0 CO2 = R 330.0 DEW = .0 WIND= .0 SIMULATION OPT : WATER :Y NITROGEN:Y N-FIX:Y PESTS :N PHOTO :C ET :R MANAGEMENT OPT : PLANTING:R IRRIG :R FERT :R RESIDUE:R HARVEST:M WTH:M

@DATE 81177 81183 81189 81195 81201 81207 81213 81219 81225 81231 81237 81243 81249 81255 81261 81267 81273 81279 81285 81291 81297

CDAY 0 6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120

: : : : : : : : : : : :

EPAA .00 .27 .53 1.47 1.97 5.20 2.60 4.05 4.45 3.93 4.00 3.18 3.44 4.00 2.52 3.69 3.78 3.45 2.46 3.22 1.63

ETAA 3.92 1.44 2.05 3.88 2.62 5.55 3.93 5.20 5.26 4.25 4.44 3.59 3.76 4.56 2.99 4.25 4.51 3.76 2.78 3.76 2.77

EOAA 7.37 5.61 5.35 5.83 3.73 6.62 3.93 5.20 5.26 4.25 4.44 3.59 3.76 4.56 2.99 4.25 4.51 3.76 2.78 3.76 2.89

SWXD 172.3 161.1 166.7 169.7 156.2 143.9 161.6 163.5 151.2 139.8 151.6 197.7 156.2 148.9 152.2 143.1 139.5 129.6 133.5 123.6 129.2

ROFC .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .1 .1 .1 .1 .1 .1 .1 .1 .1 .1

DRNC .0 12.5 13.2 20.5 29.6 29.6 29.6 40.1 41.6 41.6 42.1 44.2 71.5 71.5 71.5 71.5 71.5 71.5 71.5 71.5 71.5

PREC 18 19 33 63 73 74 94 137 145 146 165 219 220 230 247 247 247 247 250 250 254

IRRC 0 8 8 8 8 27 66 66 85 104 123 142 157 170 183 202 230 249 272 287 315

SRAA 25.2 22.2 19.6 21.5 14.5 23.6 15.6 21.0 21.1 17.1 18.2 14.8 15.4 18.6 12.9 17.8 18.9 16.3 12.0 16.9 12.3

TMXA 36.1 32.8 34.8 34.8 33.7 35.9 33.9 33.3 33.3 33.3 32.6 31.7 32.6 33.1 30.0 32.0 32.2 30.9 29.8 30.7 30.6

TMNA 21.7 19.2 21.7 22.2 21.9 22.2 21.9 22.0 22.2 23.1 21.9 21.9 21.9 21.7 20.2 19.4 18.3 15.9 18.9 11.9 17.1

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

66

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

T ABLE 16. DETAILED SIMULATION NITROGEN O UTPUT FILE . (OUTN) STRUCTURE Variable

Variable Name1 Header 2

Format 3

Line 1 Run number 4 Run identifier

NREP TITLER

5 10

I C

3 25

Line 2 Model name Crop name

MODEL CROPD

18 3

C C

8 10

INSTE SITEE EXPTNO CROP

18 0 0 1

C C C C

2 2 4 2

ENAME

18

C

60

TRTNO TITLET

11 5

I C

2 25

1

C

77+

1 1 1 1 1 1 1 1 1 1 1 1 1

I I R R R R R R R R R R I

5 5 5 5 5 5 5 5 5 5 5 5 5

Line 3 Experiment identifier, made up of: Institute code Site code Experiment number/abbreviation Crop group code Experiment name (Treatment set and experimental condition names, separated by a semi-colon) Line 4 Treatment number Treatment name Line 5 5 Variable abbreviations Line 6 on Date (Year + days from Jan. 1) Days from planting Crop nitrogen Grain nitrogen, kg ha -1 Veg. (stem + leaf) nitrogen, kg ha-1 Percent nitrogen in grain, % Percent veg(stem+leaf) nitrogen, % Cumulative inorganic N applied, kg ha-1 Cumulative N fixation, kg ha -1 Cumulative N uptake, kg ha -1 Cumulative N leached, kg ha -1 Inorganic N in soil, kg ha -1 Organic N in soil, kg ha-1

YRDOY DAP WTNCAN WTNSD WTNVEG PCNGRN PCNVEG TANFGR WTNFX WTNUP TLCH TSIN TSON

DATE CDAY CNAD GNAD VNAD HN%D VN%D NAPC NFXC NUPC NLCC NIAD NOAD

1 1 1 2 2 I 1 1 1 1

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

67

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

1

Abbreviations used as variable names in the IBSNAT models.

2

Abbreviations suggested for use in header lines (those designated with ‘@’) within the file. They correspond to the variable names used in the associated database.

3

Formats are presented as follows: number of leading spaces, variable type (Character = C, Real = R, Integer = I), variable width, and (if real) number of decimals.

4

Each new run should be demarcated with ‘*RUN’ at the beginning of this line in each file.

5

Additional information can be placed between lines 4 and 5, as required by a user, as illustrated in the example, and as documented for the Overview file in the text.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

68

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

EXAMPLE NITROGEN OUTPUT FILE *NITROGEN BALANCE OUTPUT FILE *RUN 1 MODEL EXPERIMENT TREATMENT 1

: : : :

CROP STARTING DATE PLANTING DATE WEATHER SOIL SOIL INITIAL C WATER BALANCE IRRIGATION NITROGEN BAL. N FERTILIZER RESIDUE/MANURE ENVIRONM. OPT.

IRRIGATED, COBB CRGRO940 - SOYBEAN UFGA8101 SB COBB, IRRIGATED, VEG. & REPROD. STRESS IRRIGATED, COBB

SOYBEAN CULTIVAR : COBB - MATURITY GROUP 8 JUN 26 1981 JUN 26 1981 PLANTS/m2 : 35.9 ROW SPACING : 76.cm UFGA 1981 IBSB910015 TEXTURE : - Millhopper Fine Sand DEPTH:180cm EXTR. H2O:158.4mm NO3: .0kg/ha NH4: .0kg/ha IRRIGATE ACCORDING TO FIELD SCHEDULE 315 mm IN 19 APPLICATIONS SOIL-N, N-UPTAKE & DYNAMIC N-FIXATION SIMULATION 0 kg/ha IN 0 APPLICATIONS 0 kg/ha IN 0 APPLICATIONS DAYL= .0 SRAD= .0 TMAX= .0 TMIN= .0 RAIN= .0 CO2 = R 330.0 DEW = .0 WIND= .0 SIMULATION OPT : WATER :Y NITROGEN:Y N-FIX:Y PESTS :N PHOTO :C ET :R MANAGEMENT OPT : PLANTING:R IRRIG :R FERT :R RESIDUE:R HARVEST:M WTH:M

@DATE 81177 81183 81189 81195 81201 81207 81213 81219 81225 81231 81237 81243 81249 81255 81261 81267 81273 81279 81285 81291 81297

CDAY 0 6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120

: : : : : : : : : : : :

CNAD .0 1.6 3.0 6.3 14.3 30.4 52.5 78.8 105.3 130.2 146.3 160.2 176.7 186.2 193.2 210.3 233.4 262.4 281.1 301.8 270.5

GNAD .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 2.1 19.0 49.5 98.4 148.5 184.6 213.7 222.2

VNAD .0 1.6 3.0 6.3 14.3 30.4 52.5 78.8 105.3 130.2 146.3 159.7 171.5 170.9 152.1 133.5 109.4 92.4 78.2 71.7 33.7

GN%D .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 6.37 6.37 6.37 6.37 6.37 6.37 6.37 6.37

VN%D .00 4.03 3.28 2.89 3.21 3.54 3.72 3.70 3.65 3.60 3.58 3.53 3.39 3.15 2.84 2.62 2.31 2.05 1.83 1.66 1.02

NAPC 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

NFXC .0 .6 2.5 7.2 17.9 38.9 64.7 94.8 124.4 152.9 174.1 193.4 213.6 227.5 237.6 257.4 282.1 312.1 330.7 352.2 352.2

NUPC .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .5 .6 1.3

NLCC .0 -.7 -.7 -1.2 -1.8 -1.8 -1.8 -2.5 -2.6 -2.6 -2.7 -2.8 -4.7 -4.7 -4.7 -4.7 -4.7 -4.7 -4.7 -4.7 -4.7

NIAD .2 2.3 3.6 5.4 7.3 8.4 9.6 11.6 13.0 14.2 15.5 16.8 19.9 21.1 22.3 23.3 24.4 25.5 31.0 31.8 32.0

NOAD 3895 3893 3892 3891 3889 3888 3887 3886 3885 3883 3882 3881 3880 3879 3877 3876 3875 3874 3873 3872 3871

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

69

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

T ABLE 17. DETAILED SIMULATION P EST O UTPUT F ILE. (OUTD) STRUCTURE Variable

Variable Name1

Header 2

Format 3

Line 1 Run number 4 Run identifier

NREP TITLER

5 I 10 C

3 25

Line 2 Model name Crop name

MODEL CROPD

18 C 3 C

8 10

INSTE SITEE EXPTNO CROP

18 0 0 1

2 2 4 2

ENAME

18 C

60

TRTNO TITLET

11 I 5 C

2 25

1 C

77+

1 1 1 1 1 1 1 1 1 1 1 1 1

5 5 5 5 5 5 5 5 5 5 5 5 5

Line 3 Experiment identifier, made up of: Institute code Site code Experiment number/abbreviation Crop group code Experiment name (Treatment set and experimental condition names, separated by a semi-colon) Line 4 Treatment number Treatment name Line 5 5 Variable abbreviations Line 6 on Date (Year and days from Jan. 1) Crop age (days from planting) Daily diseased leaf area increase, cm2/m2/d Daily % diseased leaf area increase, g/m2/d Daily leaf area consumed, m2/m2/d Daily leaf mass consumed, g/m 2/d Daily stem mass consumed, g/m 2/d Daily seed mass consumed, g/m 2/d Daily seed number consumed, #/m 2/d Daily shell mass consumed, g/m 2/d Daily shell number consumed, #/m 2/d Daily root mass consumed, g/m 2/d Daily root length density consumed,cm/cm3/d

YRDOY DAP DISLA DISLAP LAIDT WLIDOT WSIDOT SWIDOT SDIDOT WSHIDT SHIDOT WRIDOT RLVDOT

DATE CDAY DL %DL% DLAI DLFM DSTM DSDM DSD# DSHM DSH# DRTM DRLV

C C C C

I I I R R R R R R R R R R

1 2 2 2 2 2 2 2 2 2

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

70

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

1

Abbreviations used as variable names in the IBSNAT models.

2

Abbreviations suggested for use in header lines (those designated with ‘@’) within the file. They correspond to the variable names used in the associated database.

3

Formats are presented as follows: number of leading spaces, variable type (Character = C, Real = R, Integer = I), variable width, and (if real) number of decimals.

4

Each new run should be demarcated with ‘*RUN’ at the beginning of this line in each file.

5

Additional information can be placed between lines 4 and 5, as required by a user, as illustrated in the example, and as documented for the Overview file in the text.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

71

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

E XAMPLE P EST O UTPUT F ILE *PEST ASPECTS OUTPUT FILE *RUN 1 MODEL EXPERIMENT TREATMENT 8 CROP STARTING DATE PLANTING DATE WEATHER SOIL SOIL INITIAL C WATER BALANCE IRRIGATION NITROGEN BAL. N FERTILIZER RESIDUE/MANURE ENVIRONM. OPT.

: : : :

Pest and Diseases CRGRO940 - PEANUT UFGA7602 PN PEANUT PEST TEST 1 LEAF,STEM,SEED,SHELL MASS

: : : : : : : : : : : :

PEANUT CULTIVAR : FLORUNNER - FLORUNNER VARS MAY 5 1976 MAY 5 1976 PLANTS/m2 : 12.9 ROW SPACING : 31.cm UFGA 1976 IBPN910015 TEXTURE : - Millhopper Fine Sand DEPTH:180cm EXTR. H2O:158.4mm NO3: .0kg/ha NH4: 0kg/ha IRRIGATE ACCORDING TO FIELD SCHEDULE 75 mm IN 4 APPLICATIONS NOT SIMULATED ; NO N-STRESS

DAYL= .0 SRAD= .0 TMAX= .0 TMIN= RAIN= .0 CO2 = R 330.0 DEW = .0 WIND= SIMULATION OPT : WATER :Y NITROGEN:N N-FIX:Y PESTS :Y PHOTO :C MANAGEMENT OPT : PLANTING:R IRRIG :R FERT :R RESIDUE:R HARVEST:R

@DATE 76126 76129 76132 76135 76138 76141 76144 76147 76150 76153 76156 76159 76162 76165 76168 76171 76174 76177 76180 76183 76186 76189 76192 76195 76198

CDAY 0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72

DLA 0 0 0 0 0 0 0 0 0 39 100 235 459 648 794 1031 1543 2313 3200 4118 4953 5869 6722 7412 7761

%DL% .0 .0 .0 .0 .0 .0 .0 .0 .0 1.3 2.5 3.8 5.0 6.2 7.5 8.7 10.0 11.3 12.5 13.8 15.0 16.3 17.5 18.8 20.0

DLAI .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .01 .02 .02 .02 .02 .03 .02 .01

DLFM .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .60 .75 .93 .87 .97 1.13 .96 .58

DSTM .00 .00 .00 .00 .00 .00 .00 .00 .00 .08 .12 .23 .32 .35 .45 .69 .81 1.33 1.54 1.79 1.93 2.22 2.41 2.48 1.81

DSDM DSD# .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .76 .07 2.89 .17 5.21 .23 6.53 .29 8.00 .34 9.66 .35 12.32

DSHM .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .06 .26 .51 .67 .83 .99 1.19

DSH# .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .00 .39 1.47 2.61 3.22 3.88 4.62 5.80

DRTM .00 .00 .00 .00 .00 .00 .00 .00 .00 .18 .42 .68 1.02 1.87 2.75 3.46 3.32 3.31 3.36 3.16 3.28 3.54 3.33 4.05 5.29

.0 .0 ET :R WTH:M DRLV .00 .00 .00 .00 .00 .00 .00 .00 .00 .01 .03 .05 .08 .13 .17 .22 .21 .20 .20 .19 .19 .20 .18 .21 .26

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

72

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

CHAPTER FIVE. E X P E R I M E N T P E R F O R M A N C E D ATA F I L E S Experiment performance data are contained in FILEP, FILED, FILEA and FILET, which the user generates using the formats shown in Tables 18 and 19. The correct formatting of FILEA and FILET is critical because these files link directly to the model(s). The purpose of these files is to present measured performance data for direct comparison with simulated results. FILEP is the basic performance data file, with information detailed at the replicate level for each treatment, arranged by plots. FILED would contain replicate performance data arranged by date of observations. In other words, FILEP and FILED are the basic performance data files, with information detailed at the replicate level for each treatment, arranged by plots in FILEP and by date of measurement in FILED. FILEA and FILET contain average values derived from the data in FILEP or FILED. FILEA uses one line of information per treatment and this one line is a summary of information of the entire treatment. The dates included on each line are of the main phenological events and the yield and yield components at final harvest, as well as other related variables. FILET contains one line of data for each observation date for each treatment. Averages are arranged in columns in order of treatment in FILEA, in order of date in the time-course file, FILET. The files will have a variable number of columns, depending on the data available. Each could have as few as one measured variable, or as many variables as measured. Each experimental data file, however, will always have an initial section with the institute and site codes and experiment number, the crop group code, and the experiment name. All columns have one leading blank and five spaces for data, and are headed by standard variable abbreviations (see Appendix C for a listing of abbreviations). Each data column, if appropriate, could also have header lines containing information on the date measurements were made, and on the factor by which data need to be multiplied to convert them to standard units. Examples are shown in Tables 18 and 19.

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

73

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

T ABLE 18. E XAMPLE OF AN E XPERIMENT P ERFORMANCE DATA A VERAGES FILE (FILEA), S TORED IN THE DATA F ILE, UFGA8101.SBA. *EXP.DATA (A): UFGA8101SB COBB, IRRIGATED, VEG. & REPROD. STRESS @ TRNO HWAM HWUM H#AM 1 3502. .1476 2374. 2 3355. .1529 2195. 3 2738. .1292 2119.

H#UM 1.88 1.84 1.77

LAIX CWAM BWAH 6.25 6851. 2137. 4.48 6109. 1587. 6.25 5881. 2064.

ADAT 224 225 224

MDAT 295 295 295

PD1T 243 245 243

PDFT PWAM 243 4526. 245 4403. 243 3690.

T ABLE 19. E XAMPLE OF AN E XPERIMENT T IME-C OURSE D ATA F ILE (FILET), SHOWING T IME S ERIES FOR T REATMENT 1, STORED IN THE D ATA FILE , UFGA8101.SBT. *EXP.DATA (T): UFGA8101SB COBB, IRRIGATED, VEG. & REPROD. STRESS @TRNO 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DATE 81188 81190 81196 81204 81208 81210 81212 81215 81219 81223 81225 81229 81233 81237 81245 81246 81251 81252 81257 81259 81261 81266 81267 81271 81273 81274 81278 81280 81287 81294 81301 81308

L#SD .8 1.4 2.5 6.3 6.8 7.1 7.4 7.9 8.6 10.3 10.4 10.6 -99 14.1 14.4 -99 11.8 -99 15.3 -99 15.3 -99 15.0 16.5 -99 17.3 16.0 -99 -99 -99 -99 -99

LAID .11 .15 .37 1.27 1.75 1.75 1.74 2.48 3.11 3.47 4.20 4.57 4.33 5.00 5.87 6.25 5.34 4.85 4.49 5.06 4.74 4.50 4.10 3.85 4.10 4.33 3.17 3.96 3.83 2.18 .61 .44

P#AD 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 50. 757. -99 992. -99 1467 -99 1505 -99 1442 1184 -99 1552 1193 -99 -99 -99 -99 -99

SWAD 18 20 70 254 404 437 462 678 1005 1260 1384 1758 1896 2163 2704 2897 2639 2727 2940 3674 2928 3270 2566 2419 2876 3287 2603 2962 3024 2483 1966 2307

GWAD 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 557 919 1037 1294 1643 2437 1804 2387 3278 3548 3208 3796

LWAD 40 53 144 350 497 499 525 722 864 980 1102 1317 1206 1469 1717 1750 1657 1472 1704 1651 1694 1612 1409 1549 1572 1730 1398 1532 1525 810 215 163

CWAD 58 74 214 604 901 936 987 1400 1869 2240 2486 3075 3102 3636 4510 4849 4657 4621 5504 6624 5992 6794 5957 6154 6998 8578 6732 7913 8858 7869 6323 7378

PWAD 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 4 89 202 361 421 860 1299 1370 1912 1983 2185 2550 3561 2732 3419 4310 4576 4142 4909

SHAD 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 4 89 202 361 421 860 1299 813 993 946 891 907 1124 928 1032 1032 1028 934 1113

G#AD 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 2918 3470 2439 2142 2511 3063 2109 2434 2690 2469 2223 2524

SH%D 00.00 00.00 00.00 00.00 00.00 00.00 00.00 00.00 00.00 00.00 00.00 00.00 00.00 00.00 00.00 00.00 00.00 00.00 00.00 00.00 40.66 48.06 52.29 59.22 64.43 68.44 66.03 69.82 76.06 77.53 77.45 77.33

SLAD 272 277 254 360 351 350 332 344 359 354 380 348 357 341 342 359 322 330 264 306 280 281 291 249 261 250 227 259 251 268 287 276

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

74

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

CHAPTER SIX. D I SC USSI O N These proposed file structures resulted from the interest in an earlier set of crop model inputs and outputs published by IBSNAT (1986, 1990). The earlier standards have been used for a number of crop models in the integrated software package called DSSAT (Decision Support System for Agrotechnology Transfer). This earlier attempt demonstrated the value of such standards in facilitating the organization and exchange of crop weather, soil, and plot data among modeling and model user groups at various institutions. The inputs and outputs described in this document represent a wider range of crop, weather, and soil conditions, and should be nonspecific to a crop model. By expanding the list of inputs, however, it is more likely that some of the inputs will not be available for all experiments or for all intended applications. This creates a dilemma for modelers, who must decide which of the defined variables are to be a minimum set required to run their models, or must include capabilities in their models to recognize and estimate missing variables. The same is true for outputs. However, this does not create the same difficulty as the lack of inputs; it means that only parts of the models can be validated in any one experiment. Nonetheless, a basic minimum data set is needed for effective interpretation of all experiments, regardless of model validation applications. Such a minimum data set has been defined (IBSNAT, 1988), and vigorous efforts should be made to obtain such information in all experiments. The files described here reflect this minimum data set, and thus form part of an overall system that encompasses forms for data collection in the field, files for data storage, and files for use by various analysis programs. Further changes in the model input component of this system will inevitably have an impact on the other components. The design of the system as an entity makes it easier to accommodate such changes than would be the case if each part was considered separately. It is hoped that such an advantage can be

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

75

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

76

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

RE F E RE N CE S maintained and strengthened in the future. Hunt, L.A., J.W. Jones, P.K. Thornton, G. Hoogenboom, D.T. Imamura, G.Y.Tsjui and U. Singh. 1994. Accessing Data, Models and Application Programs. In: Tsuji, G.Y., G. Uehara and S. Balas (eds.). DSSAT v3. Vol. 1-3. University of Hawaii, Honolulu, HI. Imamura, D.T. and A.Y.C. Tang. 1994. Converting from DSSAT v2.1 to DSSAT v3 data files and formats. In: Tsuji, G.Y., G. Uehara and S. Balas (eds.). DSSAT v3. Vol. 1-5. University of Hawaii, Honolulu, HI. Imamura, D.T., J.W. Jones, P.K. Thornton and G. Hoogenboom. 1994. Creating management files to run models and document experiments.. In: Tsuji, G.Y., G. Uehara and S. Balas (eds.). DSSAT v3. Vol. 1-4. University of Hawaii, Honolulu, HI. International Benchmark Sites Network for Agrotechnology Transfer. 1986. Technical Report5: Documentation for the IBSNAT crop model input and output files, version 1.0. Department of Agronomy and Soil Science, College of Tropical Agriculture and Human Resources, University of Hawaii, Honolulu. International Benchmark Sites Network for Agrotechnology Transfer. 1988. Technical Report1: Experimental design and data collection procedures for IBSNAT; 3rd. edition, revised. Department of Agronomy and Soil Science, College of Tropical Agriculture and Human Resources, University of Hawaii, Honolulu. International Benchmark Sites Network for Agrotechnology Transfer. 1989. DSSAT version 2.1 user’s guide. Department of Agronomy and Soil Science, College of Tropical Agriculture and Human Resources, University of Hawaii, Honolulu. International Benchmark Sites Network for Agrotechnology Transfer. 1990. Technical Report5: Documentation for the IBSNAT crop model input and output files, version 1.1. Department of Agronomy and Soil Science, College of Tropical Agriculture and Human Resources, University of Hawaii, Honolulu. Soil Survey Staff. 1975. Soil Taxonomy, A basic system of soil classification for making and interpreting soil surveys. Soil Conservation Service. U.S. Dept. Agr: Handbook 436. U.S. Govt. Printing Office, Washington, D.C. DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

77

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

78

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

APPENDIX A. W E AT H E R L I S T A N D S O I L P R O F I L E L I S T F I L E S W E AT H E R L I S T F I L E This file contains a list of weather data files which are available for use by the simulation models. It has one line of information (see Table 20, below) for each weather data set which gives the file name, site name, latitude, longitude, and elevation. The actual weather file used for a particular experiment is specified in the experiment file (FILEX). The weather list file typically would be used in sensitivity analysis where a user may wish to examine crop performance under alternate weather conditions.

T ABLE 20. E XAMPLE WEATHER L IST FILE . (WTH.LST) *WEATHER LIST @# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

FILENAME CCPA8601 CCPA8701 DTSP8501 EBGO8701 IGQU8901 IRMZ8501 IRMZ8601 IRPI8001 IRPI8501 IRPI8601 IUCA7901 KSAS8101 UBKA8601 UFGA7601 UFGA7801 UFGA7901 UFGA8001 UFGA8101 UFGA8201 UFGA8401 UFGA8501 UFGA8601 UFQU7901

EXT WTH WTH WTH WTH WTH WTH WTH WTH WTH WTH WTH WTH WTH WTH WTH WTH WTH WTH WTH WTH WTH WTH WTH

SITE NAME................. LAT..... LONG.... ELEV. TAV.. TAMP. CIAT,PALMIRA,COLOMBIA 3.5 -76.4 -99 -99.0 -99.0 CIAT,PALMIRA,COLOMBIA 3.5 -76.4 -99 -99.0 -99.0 SUPHAN_BURI,THAILAND 14.5 100.1 -99 -99.0 -99.0 CNPAF,GOIANIA,BRAZIL -16.3 -49.1 -99 -99.0 -99.0 ICTA,QUEZADA,GUATEMALA 14.3 -90.0 -99 -99.0 -99.0 IRRI,MUNOZ,PHILIPPINES 15.7 120.9 -99 -99.0 -99.0 IRRI,MUNOZ,PHILIPPINES 15.7 120.9 -99 -99.0 -99.0 IRRI,PILA,PHILIPPINES 14.2 121.3 50 27.0 3.8 IRRI,PILA,PHILIPPINES 14.2 121.3 50 27.0 3.8 IRRI,PILA,PHILIPPINES 14.2 121.3 50 27.0 3.8 CASTANA,IOWA,USA 42.2 -93.7 -99 -99.0 -99.0 ASHLAND,KANSAS,USA 39.0 -97.0 -99 -99.0 -99.0 KAJONDI_FARM,BURUNDI -3.3 30.0 -99 -99.0 -99.0 GAINESVILLE,FLORIDA,USA 29.6 -82.4 10 20.9 7.4 GAINESVILLE,FLORIDA,USA 29.6 -82.4 10 20.9 7.4 GAINESVILLE,FLORIDA,USA 29.6 -82.4 10 20.9 7.4 GAINESVILLE,FLORIDA,USA 29.6 -82.4 10 20.9 7.4 GAINESVILLE,FLORIDA,USA 29.6 -82.4 10 20.9 7.4 GAINESVILLE,FLORIDA,USA 29.6 -82.4 10 20.9 7.4 GAINESVILLE,FLORIDA,USA 29.6 -82.4 10 20.9 7.4 GAINESVILLE,FLORIDA,USA 29.6 -82.4 10 20.9 7.4 GAINESVILLE,FLORIDA,USA 29.6 -82.4 10 20.9 7.4 QUINCY,FLORIDA,USA 30.6 -86.4 -99 -99.0 -99.0

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

79

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

SOIL PROFILE LIST FILE This file contains a list of soil profiles which are available for use by the simulation models. It has one line of information (see Table 21, below) for each soil profile which gives the file name, soil code, texture, depth and description. The actual soil profile used for a particular experiment is specified in the experiment file (FILEX).

T ABLE 21. E XAMPLE SOIL PROFILE L IST FILE. (SOL.LST) *SOIL LIST @# 1 2 3 4 5 6 7 8 9 10 11 12 13 14

FILENAME SOIL SOIL SOIL SOIL SOIL SOIL SOIL SOIL SOIL SOIL SOIL SOIL SOIL SOIL

EXT SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL

SOIL CODE GAPN930001 IBBN910015 IBBN910030 IBBN910038 IBMZ910014 IBPN910015 IBRI910001 IBRI910002 IBRI910063 IBRI910071 IBSB910015 IBSB910017 IBSB910026 IBWH910018

TEXTURE SALO FSA -99 -99 FSA FSA -99 -99 -99 -99 FSA SALO SILO CSI

DEPTH 178 180 209 150 180 180 50 50 135 51 180 203 180 180

DESCRIPTION FACEVILLE MILLHOPPER FINE SAND M3 SAN_FERNANDO,QUEZADA MILLHOPPER FINE SAND MILLHOPPER FINE SAND ANDAQUEPTIC HAPLAQUOLL VERTIC TROPAQUEPT UPLAND SUPHAN LOWLAND MILLHOPPER FINE SAND ORANGEBURG SANDY LOAM IDA SILT LOAM HAYNIE

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

80

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

APPENDIX B. E X P E R I M E N T D E TA I L S C O D E S Headers used in the @ line to identify variables are listed first, codes to identify methods, chemicals, etc. are listed next in sections that relate to specific aspects (Chemicals;Crop and weed species;Diseases and pests;Drainage; Environment modification factors; Fertilizers, inoculants and amendments; Harvest components;Harvest size categories;Methods-fertilizer and chemical applications; Methods-irrigation and water management;Methods-soil analysis; Planting materials; Plant distribution; Residues and organic fertilizers; Rotations;Soil texture;and Tillage implements). The fields in the file are as follows: CDE The ‘universal’ code used to facilitate data interchange. DESCRIPTION A description of the code, with units. SO The source of the codes (IB=IBSNAT). Codes added by a user should be referenced in this field and the name and address of the person adding the code should be entered as a comment (ie.with a ‘!’ in column 1) below this note. This is important to ensure that information from different workers can be easily integrated. Users adding codes should also ensure that those constructed by adding a number to section code (eg.FE001,CH001) are clearly identified with a letter in the this position (eg.FEK01 for a fertilizer code added by someone with a family name beginning with K). *Headers @CDE ADDRESS C CDATE CHAMT CHCOD CHDEP CHME CHNOTES CNAME CNOTES CR CU ECO2 EDATE EDAY EDEW EMAX EMIN ERAD ERAIN EWIND FACD FAMC FAMK FAMN FAMO FAMP FDATE FDEP FL FLDD FLDS FLDT FLOB FLSA FLST FMCD FOCD HAREA HARM HCOM HDATE HL

DESCRIPTION Contact address of principal scientist Crop component number (default = 1) Application date, year + day or days from planting Chemical application amount, kg ha-1 Chemical material, code Chemical application depth, cm Chemical application method, code Chemical notes (Targets, chemical name, etc.) Cultivar name Cultivar details (Type, pedigree, etc.) Crop code Cultivar level CO2 adjustment, A,S,M,R + vpm Emergence date, earliest treatment Daylength adjustment, A,S,M,R + h Humidity adjustment, A,S,M,R + oC Temperature (maximum) adjustment, A,S,M,R + oC Temperature (minimum) adjustment, A,S,M,R + oC Radiation adjustment, A,S,M,R + MJ m-2day-1 Precipitation adjustment, A,S,M,R + mm Wind adjustment, A,S,M,R + km day-1 Fertilizer application/placement, code Ca in applied fertilizer, kg ha-1 K in applied fertilizer, kg ha-1 N in applied fertilizer, kg ha-1 Other elements in applied fertilizer, kg ha-1 P in applied fertilizer, kg ha-1 Fertilization date, year + day or days from planting Fertilizer incorporation/application depth, cm Field level Drain depth, cm Drain spacing, m Drainage type, code Obstruction to sun, degrees Slope and aspect, degrees from horizontal plus direction (W, NW, etc. Surface stones (Abundance, % + Size, S,M,L) Fertilizer material, code Other element code, e.g.,. MG Harvest area, m-2 Harvest method Harvest component, code Harvest date, year + day or days from planting Harvest level

SO IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

81

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

HLEN HPC HRNO HSIZ HSTG IAME IAMT IC ICBL ICDAT ICND ICRE ICRN ICRT IDATE IDEP ID_FIELD ID_SOIL IEFF IEPT INGENO IOFF IROP IRVAL ITHR MC ME MF MH MI MP MR MT NOTES O ODATE PAGE PAREA PCR PDATE PENV PEOPLE PLAY PLDP PLDR PLDS PLEN PLME PLOR PLPH PLRD PLRS PLSP PLWT PPOE PPOP PRNO R RACD RAMT RCOD RDATE RDEP RDMC RESK RESN RESP RINP SA SABD SABL

Harvest row length, m Harvest percentage, % Harvest row number Harvest size group, code Harvest stage Method for automatic applications, code Amount per automatic irrigation if fixed, mm Initial conditions level Depth, base of layer, cm Initial conditions measurement date, year + days Nodule weight from previous crop, kg ha-1 Rhizobia effectiveness, 0 to 1 scale Rhizobia number, 0 to 1 scale Root weight from previous crop, kg ha-1 Irrigation date, year + day or days from planting Management depth for automatic application, cm Field ID (Institute + Site + Field) Soil ID (Institute + Site + Year + Soil) Irrigation application efficiency, fraction End point for automatic appl., % of max. available Cultivar identifier End of automatic applications, growth stage Irrigation operation, code Irrigation amount, depth of water/watertable, etc., mm Threshold for automatic appl., % of max. available Chemical applications level Environment modifications level Fertilizer applications level Harvest level Irrigation level Planting level Residue level Tillage level Notes Rotation component - option (default = 1) Environmental modification date, year + day or days from planting Transplant age, days Gross plot area per rep, m-2 Previous crop code Planting date, year + days from Jan. 1 Transplant environment, ~C Names of scientists Plot layout Planting depth, cm Plots relative to drains, degrees Planting distribution, row R, broadcast B, hill H Plot length, m Planting method, code Plot orientation, degrees from N Plants per hill (if appropriate) Row direction, degrees from N Row spacing, cm Plot spacing, cm Planting material dry weight, kg ha-1 Plant population at emergence, m-2 Plant population at seeding, m-2 Rows per plot Rotation component - number (default = 1) Residue application/placement, code Residue amount, kg ha-1 Residue material, code Incorporation date, year + days Residue incorporation depth, cm Residue dry matter content, % Residue potassium concentration, % Residue nitrogen concentration, % Residue phosphorus concentration, % Residue incorporation percentage, % Soil analysis level Bulk density, moist, g cm-3 Depth, base of layer, cm

IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

82

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

SADAT SAHB SAHW SAKE SANI SAOC SAPX SH20 SITE(S) SLDP SLTX SM SMHB SMKE SMPX SNH4 SNO3 TDATE TDEP TIMPL TL TN TNAME WSTA

Analysis date, year + days from Jan. 1 pH in buffer pH in water Potassium, exchangeable, cmol kg-1 Total nitrogen, g kg-1 Organic carbon, g kg-1 Phosphorus, extractable, mg kg-1 Water, cm3 cm-3 Name and location of experimental site(s) Soil depth, cm Soil texture Simulation control level pH in buffer determination method, code Potassium determination method, code Phosphorus determination method, code Ammonium, KCl, g elemental N Mg-1 soil Nitrate, KCl, g elemental N Mg-1 soil Tillage date, year + day Tillage depth, cm Tillage implement, code Tillage level Treatment number Treatment name Weather station code (Institute + Site)

*Chemicals (Herbicides, Insecticides, Fungicides, etc.) @CDE DESCRIPTION CH001 Alachlor (Lasso), Metolachlor (Dual) [Herbicide] CH002 Propanil [Herbicide] CH003 Trifluralin [Herbicide] CH004 Dalapon [Herbicide] CH005 MCPA [Herbicide] CH006 2,4-D [Herbicide] CH007 2,4,5-T [Herbicide] CH008 Pendimethalin [Herbicide] CH009 Atrazine [Herbicide] CH010 Diquat [Herbicide] CH011 Paraquat [Herbicide] CH021 Carbaryl, Sevin, Septene [Insecticide] CH022 Malathion, Mercaptothion [Insecticide] CH023 Naled [Insecticide] CH024 Dimethoate [Insecticide] CH025 Fention [Insecticide] CH026 Diazinon, Basudin [Insecticide] CH027 Ethion, Diethion [Insecticide] CH028 Oxydemeton-Methyl [Insecticide] CH029 Azinphos-Methyl [Insecticide] CH030 Phosphamidon [Insecticide] CH031 Mevinphosl [Insecticide] CH032 Methyl Parathion [Insecticide] CH033 Parathion [Insecticide] CH034 DDT [Insecticide] CH035 BHC, HCH [Insecticide] CH036 Chlordane [Insecticide] CH037 Heptachlor [Insecticide] CH038 Toxaphene [Insecticide] CH039 Aldrin [Insecticide] CH040 Dieldrin [Insecticide] CH041 Endrin, Nendrin [Insecticide] CH042 Methomyl, Lannat [Insecticide] CH043 Thiotex [Insecticide] CH044 Furadan [Insecticide] CH045 Endosulfan [Insecticide] CH051 Captan [Fungicide] CH052 Benomyl [Fungicide] CH053 Zineb [Fungicide] CH054 Maneb [Fungicide] CH055 Mancozeb [Fungicide] CH056 Tilt [Fungicide] CH057 Rhizobium (for legume crops) *Crop and Weed Species

IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

SO IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

83

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

@CDE AR AL BA BN BS BW CO CS FA GW ML MZ OA PN PT RI SB SC SG ST WH

DESCRIPTION Aroid Alfalfa/Lucerne Barley Dry bean Beet sugar Broad leaf weeds Cotton Cassava Fallow Grass weeds Pearl Millet Maize Oats Peanut Potato Rice Soybean Sugar Cane Grain sorghum Shrubs/trees Wheat

SO IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

*Disease and Pest Organisms @CDE DESCRIPTION !Examples of codes that have been used are given below. CEW Corn earworm (Heliothis zea), no. m-2 VBC Velvetbean caterpillar (Anticarsia gemmatalis), no. m-2 SBL Soybean looper (Pseudoplusia includens), no. m-2 SKB Southern green stinkbug (Mezara viridula), no. m-2 RKN Root-knot nematode (Meloidogyne spp.), no. cm-3 soil CUT Cutworm, no. m-2

SO IB IB IB IB IB IB IB

*Drainage @CDE DESCRIPTION DR000 No drainage DR001 Ditches DR002 Sub-surface tiles DR003 Surface furrows

SO IB IB IB IB

*Environment Modification Factors @CDE DESCRIPTION A Add S Subtract M Multiply R Replace

SO IB IB IB IB

*Fertilizers, Inoculants and Amendments @CDE DESCRIPTION FE001 Ammonium nitrate FE002 Ammonium sulfate FE003 Ammonium-nitrate-sulfate FE004 Anhydrous ammonia FE005 Urea FE006 Diammnoium phosphate FE007 Monoammonium phosphate FE008 Calcium nitrate FE009 Aqua ammonia FE010 Urea ammonium nitrate solution FE011 Calcium ammonium nitrate solution FE012 Ammonium polyphosphate FE013 Single superphosphate FE014 Triple superphosphate FE015 Liquid phosphoric acid FE016 Potassium chloride FE017 Potassium nitrate FE018 Potassium sulfate FE019 Urea super granules FE020 Dolomitic limestone FE021 Rock phosphate FE022 Calcitic limestone

SO IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

84

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

FE024 FE026

Rhizobium Calcium hydroxide

IB IB

*Harvest components @CDE DESCRIPTION C Canopy L Leaves H Harvest product

SO IB IB IB

*Harvest size categories @CDE DESCRIPTION A All S Small - less than 1/3 full size M Medium - from 1/3 to 2/3 full size L Large - greater than 2/3 full size

SO IB IB IB IB

*Methods - Fertilizer and Chemical Applications @CDE DESCRIPTION AP000 Applied when required - no shortage AP001 Broadcast, not incorporated AP002 Broadcast, incorporated AP003 Banded on surface AP004 Banded beneath surface AP005 Applied in irrigation water AP006 Foliar spray AP007 Bottom of hole AP008 On the seed AP009 Injected AP011 Brodcast on flooded/saturated soil, none in soil AP012 Brodcast on flooded/saturated soil, 15% in soil AP013 Brodcast on flooded/saturated soil, 30% in soil AP014 Brodcast on flooded/saturated soil, 45% in soil AP015 Brodcast on flooded/saturated soil, 60% in soil AP016 Brodcast on flooded/saturated soil, 75% in soil AP017 Brodcast on flooded/saturated soil, 90% in soil AP018 Band on saturated soil,2cm flood, 92% in soil AP019 Deeply placed urea super granules/pellets, 95% in soil AP020 Deeply placed urea super granules/pellets, 100% in soil

SO IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

*Methods - Irrigation and Water Management (Units for associated data) @CDE DESCRIPTION IR001 Furrow, mm IR002 Alternating furrows, mm IR003 Flood, mm IR004 Sprinkler, mm IR005 Drip or trickle, mm IR006 Flood depth, mm IR007 Water table depth, mm IR008 Percolation rate, mm day-1 IR009 Bund height, mm

SO IB IB IB IB IB IB IB IB IB

*Methods - Soil Analysis @CDE DESCRIPTION SA001 Olsen SA002 Bray No. 1 SA003 Bray No. 2 SA004 Mehlich SA005 Anion exchange resin SA006 Truog SA007 Double acid SA008 Colwell SA009 Water SA010 IFDC Pi strip

SO IB IB IB IB IB IB IB IB IB IB

*Planting Material/Method @CDE DESCRIPTION PM001 Dry seed PM002 Transplants PM003 Vegetative cuttings PM004 Pregerminated seed

SO IB IB IB IB

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

85

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

*Plant @CDE R H U

Distribution DESCRIPTION Rows Hills Uniform

SO IB IB IB

*Residues and Organic Fertilizer @CDE DESCRIPTION RE001 Crop residue RE002 Green Manure RE003 Barnyard Manure RE004 Liquid Manure

SO IB IB IB IB

*Rotation @CDE DESCRIPTION RO001 Continuous arable crops RO002 Rotation with forages

SO IB IB

*Soil Texture @CDE DESCRIPTION CLOSA Coarse loamy sand CSA Coarse sand CSI Coarse silt CSALO Coarse sandy loam CL Clay CLLO Clay loam FLO Fine loam FLOSA Fine loamy sand FSA Fine sand FSALO Fine sandy loam SICLL Silty clay loam LO Loam LOSA Loamy sand SA Sand SACL Sandy clay SACLL Sandy clay loam SI Silt SICL Silty clay SILO Silty loam SALO Sandy loam VFLOS Very fine loamy sand VFSA Very fine sand VFSAL Very fine sandy loam

SO IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

*Tillage Implements @CDE DESCRIPTION TI002 Tandem disk TI003 Offset disk TI004 Oneway disk TI005 Moldboard plow TI006 Chisel plow TI007 Disk plow TI008 Subsoiler TI009 Beeder/lister TI010 Field cultivator TI011 Row crop cultivator TI012 Harrow-springtooth TI013 Harrow-spike TI014 Rotary hoe TI015 Roto-tiller TI016 Row crop planter TI017 Drill TI018 Shredder TI019 Hoe TI020 Planting stick TI021 Animal-drawn implement TI022 Hand TI023 Manual hoeing

SO IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

86

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

APPENDIX C. S I M U L AT E D A N D F I E L D D ATA C O D E S Codes currently used for both simulated and field data are listed in sections relating to specific model output files. Codes currently only used for field data are listed in a section headed Expdata. Codes are assigned as far as possible in accord with the following convention: 1st letter: Plant component (eg. C for canopy; H for harvest product) 2nd letter: Measurement aspect (eg. W for dry weight; N for nitrogen weight) 3rd letter: Basis of measurement (eg. A for unit area; P for plant) 4th letter: Time or stage of measurement (eg. D for specific day) For complex aspects (eg. ear plus grain) this convention has been modified by dropping the usual 4th letter and using the first 2 letter for component(s). Codes for dates have letters for the stage first and then a D or DAT. The fields in the file are as follows: CDE The ‘universal’ code used to facilitate data interchange. LABEL A short description used when labelling graphs. DESCRIPTION A 35 character description of the aspect. OTHER CODE(S) Additional codes that may be used locally (eg. YILD for HWAM) SO The source of the codes (IB=IBSNAT). Codes added by a user should be referenced in this field and the name and address of the person adding the code should be entered as a comment (ie.with a ‘!’ in column 1) below this note. This is important to ensure that information from different workers can be easily integrated. [ SE The section to which the code belongs. Used for sorting.] *SUMMARY @CDE LABEL ADAT ANTHESIS day BWAH BYPRODUCT kg/ha CNAA TOPS N,ANTHESIS CNAM TOPS N kg/ha CPAM TOPS P kg/ha CWAA TOPS WT,ANTHSIS CWAM TOPS WT kg/ha DRCM DRAINAGE mm DWAP SOWING WT kg/ha ETCM ET TOTAL mm FNAM FIELD NAME GN%M GRAIN N%,MATURE GNAM GRAIN N kg/ha H#AM NUMBER #/m2 H#UM NUMBER #/unit HDAT HARVEST day HIAM HARVEST INDEX HWAH HAR YIELD kg/ha HWAM MAT YIELD kg/ha HWUM WEIGHT mg/unit IR#M IRRIG APPS # IRCM IRRIG mm L#SM LEAF NUMBER # L#SX LEAF NUMBER # LAIX LAI MAXIMUM MDAT MATURITY day NFXM N FIXED kg/h NI#M N APPLICATION # NIAM SOIL N kg/ha NICM TOT N APP kg/ha NLCM N LEACHED kg/ha NUCM N UPTAKE kg/ha OCAM ORGANIC C t/ha ONAM ORGANIC N kg/ha PD1T POD 1 DATE yd PDAT PLANTING DATE PDFT FULL POD DATE PO#M P APPLICATION # POCM P APPLIED kg/ha PRCM PRECIP mm

DESCRIPTION OTHER CODE(S) Anthesis date (YrDoy) ANTH By-product harvest (kg dm/ha) Tops N at anthesis (kg/ha) Tops N at maturity (kg/ha) Tops P at maturity (kg/ha) Tops weight at anthesis (kg dm/ha) Tops weight at maturity (kg dm/ha) Season water drainage (mm) Planting material weight (kg dm/ha) Season evapotranspiration (mm) Field name Grain N at maturity (%) Grain N at maturity (kg/ha) Number at maturity (no/m2) Number at maturity (no/unit) Harvest date (YRDOY) Harvest index at maturity Yield at harvest (kg dm/ha) Yield at maturity (kg dm/ha) Unit wt at maturity (mg dm/unit) Irrigation applications (no) Season irrigation (mm) Leaf number per stem,maturity Leaf number per stem,maximum Leaf area index, maximum Physiological maturity date (YrDoy) N fixed during season (kg/ha) N applications (no) Inorganic N at maturity (kg N/ha) Inorganic N applied (kg N/ha) N leached during season (kg N/ha) N uptake during season (kg N/ha) Organic soil C at maturity (t/ha) Organic soil N at maturity (kg/ha) Pod 1 date (YrDoy) Planting date (YrDoy) Full pod date (YrDoy) Number of P applications (no) P applied (kg/ha) Season precipitation (mm)

SO IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

SE SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

87

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

PWAM RECM ROCM R1AT R2AT R3AT R4AT R5AT R6AT R7AT R8AT R9AT SDAT SNAM SPAM SWXM THAM TNAM

POD WT kg/ha RESIDUE kg/ha RUNOFF mm FIRST BLOOM FIRST PEG FIRST POD FULL POD FIRST SEED FULL SEED FIRST MATURITY HARV MATURITY OVER-MATURE SIMULATION DATE STEM N,MATURITY SOIL P kg/ha EXTR WATER cm THRESHING % TREATMENT NAME

*GROWTH @CDE LABEL CDAY CROP AGE days CHTD CANOPY HEIGHT m CWAD TOPS WT kg/ha CWID CANOPY WIDTH m E#AD EAR NO./m2 EWAD EAR WT. kg/ha G#AD GRAIN NO #/m2 GSTD GROWTH STAGE GWAD GRAIN WT kg/ha GWGD GRAIN WT mg HIAD HARVEST INDEX HIPD POD INDEX L#SD LEAF NUMBER LAID LAI LAWD SLA cm2/g LN%D LEAF N % LWAD LEAF WT kg/ha NSTD N STRESS FACTOR NWAD NODULE WT kg/ha P#AD POD NO #/m2 PRSD SHOOT FRACTION PWAD POD WT kg/ha PWDD DETACHED POD WT PWTD POD WT kg/ha RDPD ROOT DEPTH m RL10 RLD 180-210cm RL1D RLD 0-5 cm RL2D RLD 5-15 cm RL3D RLD 15-30 cm RL4D RLD 30-45 cm RL5D RLD 45-60 cm RL6D RLD 60-90 cm RL7D RLD 90-120cm RL8D RLD 120-150cm RL9D RLD 150-180cm RN%D ROOT N % RWAD ROOT WT kg/ha SH%D SHELLING % SHAD SHELL WT kg/ha SHND SHELL N % SLAD SLA cm2/g SN%D STEM N % SWAD STEM WT kg/ha T#AD TILLER NO #/m2 WSGD H20 STRESS,GR WSPD H20 STRESS,PHS

Pod weight at maturity (kg dm/ha) Residue applied (kg/ha) Season surface runoff (mm) Beginning Bloom Stage Beginning Peg Stage Beginning Pod Stage Full Pod Stage Beginning Seed Stage Full Seed Stage Beginning Maturity Stage Harvest Maturity Stage Over-Mature Pod Stage Simulation start date (YrDoy) Stem N at maturity (kg/ha) Soil P at maturity (kg/ha) Extractable water at maturity (cm) Threshing % at maturity Treatment title

DESCRIPTION Crop age (days from planting) Canopy height (m) Tops weight (kg dm/ha) Canopy width (m;for 1 row) Ear number (no/m2) Ear (no grain) weight (kg dm/ha) Grain number (no/m2) Growth stage Grain weight (kg dm/ha) Unit grain weight (mg dm/grain) Harvest index (grain/top) Pod harvest index (pod/top) Leaf number per stem Leaf area index Specific leaf area (cm2/g) Leaf nitrogen concentration (%) Leaf weight (kg dm/ha) Nitrogen stress factor (0-1) Nodule weight (kg dm/ha) Pod number (no/m2) Partitioning of wt to shoot (ratio) Pod weight (kg dm/ha) Detached pod weight (kg dm/ha) Total pod weight (kg dm/ha) Root depth (m) Root density,180-210cm (cm/cm3) Root density, 0-5 cm (cm/cm3) Root density, 5-15 cm (cm/cm3) Root density, 15-30 cm (cm/cm3) Root density, 30-45 cm (cm/cm3) Root density, 45-60 cm (cm/cm3) Root density, 60-90 cm (cm/cm3) Root density, 90-120cm (cm/cm3) Root density,120-150cm (cm/cm3) Root density,150-180cm (cm/cm3) Root N concentration (%) Root weight (kg dm/ha) Shelling % (seed wt/pod wt*100) Shell weight (kg dm/ha) Shell N concentration (%) Specific leaf area (cm2/g) Stem (stover) N concentration %) Stem weight (kg dm/ha) Tiller number (no/m2) Water stress - growth (0-1) Water stress - photosynthesis (0-1)

LOCAL CODE

IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU

SO IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

SE GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR GR

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

88

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

*NITROGEN @CDE LABEL AMLS NH3VOL kgN/ha/d CNAD CROP N kg/ha FALG ALGAL ACTIVITY FALI FLOOD LT INDX FDEN DNITRF kgN/ha/d FL3C FLD NH3 mg N/l FL3N FLD NO3 mg N/l FL4C FLD NH4 mg N/l FL4N FLD NH4 kgN/ha FLBD Puddle BD g/cc FLEF Flood Evap mm FLNI FLOOD NIT INDX FLPH FLOOD pH FLTI FLOOD TMP INDX FLUR FLD UREA kgN/ha FUHY UREA HYD kgN/ha GN%D GRAIN N % GNAD GRAIN N kg/ha LN%D LEAF N % LNAD LEAF N kg/ha NAPC N APPLIED kg/ha NFXC N FIXED kg/ha NFXD N FIXED kg/ha.d NH10 NH4 ug/g180-210 NH1D NH4 ug/g 0-5cm NH2D NH4 ug/g 5-15cm NH3D NH4 ug/g15-30cm NH4D NH4 ug/g30-45cm NH5D NH4 ug/g45-60cm NH6D NH4 ug/g60-90cm NH7D NH4 ug/g 90-120 NH8D NH4 ug/g120-150 NH9D NH4 ug/g150-180 NHTD TOTAL NH4 kg/ha NI10 NO3 ug/g180-210 NI1D NO3 ug/g 0-5cm NI2D NO3 ug/g 5-15cm NI3D NO3 ug/g15-30cm NI4D NO3 ug/g30-45cm NI5D NO3 ug/g45-60cm NI6D NO3 ug/g60-90cm NI7D NO3 ug/g 90-120 NI8D NO3 ug/g120-150 NI9D NO3 ug/g150-180 NIAD TOTAL N kg/ha NITD TOTAL NO3 kg/ha NLCC N LEACHED kg/ha NOAD ORGANIC N kg/ha NUPC N UPTAKE kg/ha OXRN OXNITR kgN/ha/d RN%D ROOT N % SHND SHELL N % SN%D STEM N % SNAD STEM N kg/ha VN%D VEG N % VNAD VEGE N kg/ha

DESCRIPTION Ammonia Vol. (kg N/ha/day) Tops N (kg/ha) Floodwater Phot.Act.Index (0 to 1) Floodwater Light Index (0 to 1) Floodwater Denitrif Rt (kg N/ha/d) Floodwater Aqueous NH3 (mg N/l) Floodwater NO3-N (mg N/l) Floodwater NH4-N Conc. (mg N/l) Floodwater Ammoniacal N (kg N/ha) Puddled Soil Surface L BD (g/cc) Floodwater Evaporation Rate (mm/d) Floodwater Nitrogen Index (0 to 1) Maximum Daytime Floodwater pH Floodwater Temp. Index (0 to 1) Floodwater Urea N (kg N/ha) Urea Hydrol Floodwater (kg N/ha/d) Grain N concentration (%) Grain N (kg/ha) Leaf N concentration (%) Leaf N (kg/ha) Inorganic N applied (kg/ha) N fixed (kg/ha) N fixation rate (kg/ha.day) NH4 in 180-210cm (ug N/g soil) NH4 in 0-5 cm (ug N/g soil) NH4 in 5-15 cm (ug N/g soil) NH4 in 15-30 cm (ug N/g soil) NH4 in 30-45 cm (ug N/g soil) NH4 in 45-60 cm (ug N/g soil) NH4 in 60-90 cm (ug N/g soil) NH4 in 90-120cm (ug N/g soil) NH4 in 120-150cm (ug N/g soil) NH4 in 150-180cm (ug N/g soil) Total soil NH4 (kg N/ha) NO3 in 180-210cm (ug N/g soil) NO3 in 0-5 cm (ug N/g soil) NO3 in 5-15 cm (ug N/g soil) NO3 in 15-30 cm (ug N/g soil) NO3 in 30-45 cm (ug N/g soil) NO3 in 45-60 cm (ug N/g soil) NO3 in 60-90 cm (ug N/g soil) NO3 in 90-120cm (ug N/g soil) NO3 in 120-150cm (ug N/g soil) NO3 in 150-180cm (ug N/g soil) Total soil NO3+NH4 (kg N/ha) Total soil NO3 (kg N/ha) N leached (kg N/ha) Organic N in soil (kg N/ha) N uptake (kg N/ha) Ox Layer Nitrif Rt (kg N/ha/d) Root N concentration (%) Shell N concentration (%) Stem (stover) N concentration (%) Stem N (kg/ha) Veg (stem+leaf) N concentration (%) Veg (stem+leaf) N (kg/ha)

LOCAL CODE

SO IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

SU NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI NI

*WATER @CDE LABEL DA3D DAYLENGTH h DAYD DAYLENGTH h DRNC DRAINGE mm EOAA POT EVAP mm/d EOAD POT EVAP mm/d EPAA PLANT EVAP mm/d EPAC TRANSPIRATION EPAD PLANT EVAP mm/d ESAA SOIL EVAP mm/d ESAC SOIL EVAP mm

DESCRIPTION Daylength (h;3 deg basis) Daylength (h;sunrise to sunset) Cumulative drainage (mm) Av pot.evapotranspiration (mm/d) Potential evapotranspiration (mm/d) Av plant transpiration (mm/d) Cumulative transpiration (mm) Plant transpiration (mm/d) Av soil evaporation (mm/d) Cumulative soil evaporation (mm)

LOCAL CODE

SO IB IB IB IB IB IB IB IB IB IB

SE WA WA WA WA WA WA WA WA WA WA

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

89

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

ESAD ETAA ETAC ETAD IR#C IRRC PREC ROFC SRAA SW10 SW1D SW2D SW3D SW4D SW5D SW6D SW7D SW8D SW9D SWXD TMNA TMXA TS10 TS1D TS2D TS3D TS4D TS5D TS6D TS7D TS8D TS9D

SOIL EVAP mm/d EVAPOTRANS mm/d EVAPOTRANS mm EVAPOTRANS mm/d IRRIGATION # IRRIGATION mm PRECIPITATION RUNOFF mm SRAD MJ/m2.day SWC 180-210cm SWC 0-5 cm SWC 5-15 cm SWC 15-30 cm SWC 30-45 cm SWC 45-60 cm SWC 60-90 cm SWC 90-120cm SWC 120-150cm SWC 150-180cm EXTR WATER cm MINIMUM TEMP C MAXIMUM TEMP C S-TMP 80-210cm S-TMP 0-5 cm S-TMP 5-15 cm S-TMP 15-30 cm S-TMP 30-45 cm S-TMP 45-60 cm S-TMP 60-90 cm S-TMP 90-120cm S-TMP 20-150cm S-TMP 50-180cm

Soil evaporation (mm/d) Av evapotranspiration (mm/d) Cumulative evapotranspiration (mm) Evapotranspiration (mm/d) Irrigation applications (no) Cumulative irrigation (mm) Cumulative precipitation (mm) Cumulative runoff (mm) Av solar radiation (MJ/m2.day) Soil water 180-210cm(cm3/cm3) Soil water 0-5 cm(cm3/cm3) Soil water 5-15 cm(cm3/cm3) Soil water 15-30 cm(cm3/cm3) Soil water 30-45 cm(cm3/cm3) Soil water 45-60 cm(cm3/cm3) Soil water 60-90 cm(cm3/cm3) Soil water 90-120cm(cm3/cm3) Soil water 120-150cm(cm3/cm3) Soil water 150-180cm(cm3/cm3) Extractable water (cm) Av minimum temperature (C) Av maximum temperature (C) Soil temperature 180-210cm (C) Soil temperature 0-5 cm (C) Soil temperature 5-15 cm (C) Soil temperature 15-30 cm (C) Soil temperature 30-45 cm (C) Soil temperature 45-60 cm (C) Soil temperature 60-90 cm (C) Soil temperature 90-120cm (C) Soil temperature 120-150cm (C) Soil temperature 150-180cm (C)

IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA WA

*CARBON @CDE LABEL CGRD CGR g/m2.d CHAD CH2O g/m2.d CL%D LEAF C % CMAD CH MOB g/m2.d CS%D STEM C % GRAD GR RESP g/m2.d LI%D LIGHT INTER % LI%N NOON LIGHT IN % LMHN NOON PMAX,SHADE LMLN NOON PMAX,LIGHT MRAD M RESP g/m2.d N%HN NOON N,SHADE % N%LN NOON N,LIGHT % OMAC OM APPL kg/ha PHAD P GROSS g/m2.d PHAN PG,NOON mg/m2.s SLHN NOON SLW,SHADE SLLN NOON SLW,Light SOCD SOIL OC t/ha TGAV AVG CAN TMP, C TGNN NOON CAN TMP, C TWAD TOTAL WT kg/ha

DESCRIPTION Crop growth rate (g top+store/m2.d) CH20 accumulation (g CH2O/m2.d) C in leaf (%) C mobilization (g CH2O/m2.d) C in stem (%) Growth respiration (g CH2O/m2.d) Light (PAR) interception (%) Noon light (PAR) interception (%) Noon Pmax shaded leaves (mg/m2.s) Noon Pmax sunlit leaves (mg/m2.s) Maintenance resp (g CH2O/m2.d) Noon N shaded leaves (%) Noon N sunlit leaves (%) Cumulative OM applied (kg dm/ha) Gross photosynthesis (g CH2O/m2.d) Gross photosyn.,noon (mg CO2/m2.s) SLW in shaded lves,noon (mg dm/cm2) SLW in sunlit lves,noon (mg dm/cm2) Soil organic carbon (t/ha) Daily average canopy temp (C) Noon canopy temperature (C) Tops+roots+storage wt (kg dm/ha)

LOCAL CODE

SO IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

SE CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA

*PESTS @CDE LABEL CASM ASSIM g CH2O CEW CEW #/row-m CLAI LAI m2/m2 CLFM LEAF g/m2 CPO% PLTPOP % CRLF ROOT cm/cm2 CRLV ROOT cm/cm2 CRTM ROOT g/m2 CSD# SEED #/m2 CSDM SEED g/m2 CSH# SHELL #/m2

DESCRIPTION Cumulative assimilate reduction Corn Earworm Cumulative leaf area consumed Cumulative leaf mass consumed Cumulative pl population reduction Cumulative root length consumed Cumulative root ln density consumed Cumulative root mass consumed Cumulative seed number consumed Cumulative seed mass consumed Cumulative shell number consumed

LOCAL CODE

SO IB IB IB IB IB IB IB IB IB IB IB

SE PE PE PE PE PE PE PE PE PE PE PE

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

90

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

CSHM CSTM DASM DLA DLA% DLAI DLFM DPO% DRLF DRLV DRTM DSD# DSDM DSH# DSHM DSTM FAW RTWM SGSB SL VBC5 VBC6

SHELL g/m2 STEM g/m2 ASSIM g CH2O/d DIS. LAI cm2/m2 DIS. LAI %/d LAI m2/m2.d LEAF g/m2.d PLTPOP %/day ROOT cm/cm2.d ROOT cm/cm3.d ROOT g/m2.d SEED #/m2.d SEED g/m2.d SHELL #/m2.d SHELL g/m2.d STEM g/m2.d FAW #/m RTWM #/m SGSB #/m SB LOOPER #/m VBC5 #/m VBC6 #/m

*EXPERIMENTAL DATA @CDE LABEL AP1D APEX 1cm day CHN% CHAFF N % CHWA CHAFF WT kg/ha DRID DOUBLE RIDGES d DWAD DEAD WT kg/ha EDAT EMERGENCE day EEMD EAR EMERGENCE d EGWA EAR+GRAIN kg/ha EGWS EAR+GRAIN g/s G#PD GRAIN NO #/pl G#SD GRAIN NO #shoot GW%M GRAIN H20 % GWAM GRAIN WT kg/ha GWGM GRAIN WT mg GWPM GRAIN WT g/pl GYAM GRAIN YLD kg/ha GYPM GRAIN YLD g/pl GYVM TEST WT kg/hl HWAC COR YIELD kg/ha HYAM HARVEST kg/ha LAFD FLAG AREA cm2 LALD LEAF AREA cm2 LAPD LEAF AREA cm2/p LARD LEAF APPEARANCE L#IR LEAF # INCREASE LDAD DEAD LEAF kg/ha LF3D LEAF 3 FULL day LF5D LEAF 5 FULL day LLFD LAST LEAF day LWAM LEAF WT kg/ha LWPD LEAF WT g/plant PARI PAR INTERCEPT % RLAD ROOT LN cm/cm2 RLWD ROOT L/W cm/g RWLD ROOT W/L g/cm S#PD SHOOT NO #/pl S#AD SHOOT NO #/m2 SCWA STM+CHAFF kg/ha SP#P SPIKELETS #/pl SWPD STEM WT g/plant T#PD TILLER NO.#/pl T#AD TILLER NO.#/m2 TNAM TOTAL N kg/ha TSPD TERMINAL SPKL d TWAM TOTAL WT kg/ha VWAM VEG WT kg/ha

Cumulative shell mass consumed Cumulative stem mass consumed Daily carbohydrate pool reduction Daily diseased leaf area increase Daily % diseased leaf area increase Daily leaf area consumed Daily leaf mass consumed Daily plant population reduction Daily total root length consumed Daily root length density consumed Daily root mass consumed Daily seed number consumed Daily seed mass consumed Daily shell number consumed Daily shell mass consumed Daily stem mass consumed Fall armyworm Root worm Southern green stinkbug Soybean looper 5 instar velvetbean caterpillar 6 instar velvetbean caterpillar

DESCRIPTION Apex 1cm date (YrDoy) Chaff N (%) Chaff weight (kg dm/ha) Double ridges date (YrDoy) Dead material weight (kg dm/ha) Emergence date (YrDoy) Ear emergence date (YrDoy) Ear plus grain weight (kg dm/ha) Ear+grain weight (g dm/shoot) Grain number (no/plant) Grain number (no/shoot) Grain moisture at maturity (%) Grain wt at maturity (kg dm/ha) Unit wt at maturity (mg dm/grain) Grain wt at maturity (g dm/plant) Grain yield at maturity (kg fm/ha) Grain yld at maturity (g fm/plant) Test weight at maturity (kg fm/hl) Corrected yield (kg dm/ha) Harvest yld at maturity (kg fm/ha) Flag leaf area (cm2/leaf) Leaf area (cm2/leaf) Leaf area (cm2/plant) Leaf appearance rate (#/day) Leaf number increase rate (#/day) Dead leaf weight (kg dm/ha) Full expansion, leaf 3 (Yrdoy) Full expansion, leaf 5 (Yrdoy) Last leaf date (YrDoy) Leaf weight (kg/ha) Leaf weight (g/plant) PAR interception (%) Root length (cm/cm2) Root length/weight (cm/g) Root weight/length (g/cm) Shoot (apex) number (no/plant) Shoot (apex) number (no/m2) Stem plus chaff (kg/ha) Spikelet number (no/plant) Stem weight (g dm/plant) Tiller number (no/plant) Tiller number (no/m2) Total N at maturity (kg N/ha) Terminal spikelet date (YrDoy) Total wt, maturity (kg dm/ha) Veg (lf+st) wt,maturity (kg dm/ha)

LOCAL CODE

IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

PE PE PE PE PE PE PE PE PE PE PE PE PE PE PE PE PE PE PE PE PE PE

SO IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

SE EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

91

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

Z21D Z30D Z31D Z37D Z39D TDWA CDWA LALN BR1D BR2D BR3D BR4D SDWT HWAD

ZADOKS 21 day ZADOKS 30 day ZADOKS 31 day ZADOKS 37 day ZADOKS 39 day TOTAL+D kg/ha CANOPY+D kg/ha LEAF AREA,NEW BRANCH 1 YrDoy BRANCH 2 YrDoy BRANCH 3 YrDoy BRANCH 4 YrDoy SEED WT g/pl YIELD kg/ha

Zadoks 21 date (YrDoy) Zadoks 30 date (YrDoy) Zadoks 31 date (YrDoy) Zadoks 37 date (YrDoy) Zadoks 39 date (YrDoy) Tops+roots+storage+dead (kg dm/ha) Tops+dead wt (kg dm/ha) Leaf area,new leaves (cm2 lf-1) Branch 1 date (YrDoy) Branch 1 date (YrDoy) Branch 1 date (YrDoy) Branch 1 date (YrDoy) Seed weight (g pl-1) Yield on specified day (kg dm/ha)

IB IB IB IB IB IB IB IB IB IB IB IB IB IB

EX EX EX EX EX EX EX EX EX EX EX EX EX EX

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

92

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and

APPENDIX D. W E AT H E R D ATA C O D E S Headers used in the @ line to identify variables are listed first; codes (‘flags’) used to designate data types are listed next. The fields in the file are as follows: CDE The ‘universal’ code used to facilitate data interchange. DESCRIPTION A description of the code, with units. SO The source of the codes (IB=IBSNAT). Codes added by a user should be referenced in this field and the name and address of the person adding the code should be entered as a comment (ie.with a ‘!’ in column 1) below this note. This is important to ensure that information from different workers can be easily integrated. *Headers @CDE ALPHA ANGA ANGB DATE DEWP DURN ELEV GSDU GSST IN LAT LONG MONTH NAMN NASD PAR PDW RAIN RAIY REFHT RHUMM RNUM RTOT SAMN SDMN SDSD SI SRAD SRAY START SWMN SWSD TAMP TAV TMAX TMIN WIND WINDM WNDHT WRUN XAMN XDMN XDSD XWMN XWSD

DESCRIPTION WGEN parameter Angstrom ‘a’ coefficient Angstrom ‘b’ coefficient Date, year + days from Jan. 1 Dewpoint temperature, ~C Duration of summarization period for climate files, Yr Elevation, m Growing season duration, Day Growing season start day, Doy Institute code Latitude, degrees (decimals) Longitude, degrees (decimals) Month, # Temperature minimum,monthly average, C WGEN parameter Photosynthetic radiation, moles m-2 day-1 WGEN parameter Rainfall (incl.snow), mm day-1 Rainfall,yearly total, mm Reference height for weather measurements, m Relative humidity average over whole day for month, % Rainy days, # month-1 Rainfall total, mm month-1 Solar radiation,monthly average, MJ m-2 d-1 WGEN parameter WGEN parameter Site code Solar radiation, MJ m-2 day-1 Solar radiation,yearly average, MJ m-2 day-1 Start of summary period for climate (CLI) files, Year WGEN parameter WGEN parameter Temperature amplitude, monthly averages, ~C Temperature average for whole year, ~C Temperature maximum, ~C Temperature minimum, ~C Wind speed average, m sec-1 Windspeed average over whole day for month, m s-1 Reference height for windspeed measurements, m Wind run, km day-1 Temperature maximum,monthly average, C WGEN parameter WGEN parameter WGEN parameter WGEN parameter

SO IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

93

Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Output Files • Input and Ou

*Flags Flags attached to data to indicate the nature of the original data. Upper case flags = original data replaced; lower-case flags = original data. @CDE A a B b D d E e H h M m N n R r

DESCRIPTION Above maximum - data replaced Above maximum - but original data left Below minimum - data replaced Below minimum - - but original data left Decadal averages only in original file - data replaced Decadal averages only in original file - but original data left Format error in original file - data replaced Format error in original file - but original data left Solar radiation as sunshine hours - data replaced Solar radiation as sunshine hours - but original data left Monthly averages only in original file - data replaced Monthly averages only in original file - but original data left No data in original file - data replaced No data in original file - but original data left Rate of change exceeded - data replaced Rate of change exceeded - but original data left

SO IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB IB

DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 • DSSAT v3, Volume 2 •

94

VOLUME 2-2

CROP MODELS

G. H OOGENBOOM , J.W. J ONES , P.W. W ILKENS , W.D. B ATCHELOR , W.T. B OWEN , L.A. H UNT, N.B. P ICKERING , U. S INGH , D.C. G ODWIN , B. B AER , K.J. B OOTE , J.T. R ITCHIE , J.W. W HITE

UNIVERSITY OF GEORGIA, UNIVERSITY OF FLORIDA INTERNATIONAL FERTILIZER DEVELOPMENT CENTER UNIVERSITY OF GUELPH, MICHIGAN STATE UNIVERSITY CENTRO INTERNACIONAL dE AGRICULTURA TROPICAL, UNIVERSITY OF HAWAI INTERNATIONAL BENCHMARK SITES NETWORK FOR AGROTECHNOLOGY TRANSFER

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

96

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models •

ACKNOWLEDGEMENTS The generic models, CERES, CROPGRO and CROPSIM, used in DSSAT v3, were developed by groups of modelers working on a specific model within the generic ones. In order to give due credit to these scientists and their contributions to a model or models, the following listing of authors by model name is provided.

CERES–BARLEY S. OTTER-NACKE, J.T. RITCHIE, D.C. GODWIN

AND

U. SINGH

Michigan State University and International Fertilizer Development Center

CERES–MAIZE J.T. RITCHIE, U. SINGH, D.C. GODWIN, W.T. BOWEN

Michigan State University and International Fertilizer Development Center

CERES–MILLET U. SINGH, J.T. RITCHIE

AND

W.T. BOWEN

International Fertilizer Development Center and Michigan State University

CERES–SORGHUM J.T. RITCHIE, D.C. GODWIN

AND

U. SINGH

Michigan State University and International Fertilizer Development Center

C E R E S – W H E AT D.C. GODWIN, J.T. RITCHIE

AND

U. SINGH

International Fertilizer Development Center and Michigan State University

CERES–RICE U. SINGH, D.C. GODWIN

AND

J.T. RITCHIE

International Fertilizer Development Center and Michigan State University

N.B. The following individuals contributed to the development of one or more of the CERES models: L.A. Hunt, P.W. Wilkens, G. Smallwood, B. Baer and G. Alargarswamy.

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

97

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

CROPGRO–DRY BEAN G.HOOGENBOOM, J.W. WHITE, J.W. JONES, K.J. BOOTE, W.T. BOWEN, N.B. PICKERING AND W.D. BATCHELOR

University of Georgia, Centro International de Agricultura Tropical, University of Florida and International Fertilizer Development Center

CROPGRO–PEANUT K.J. BOOTE, J.W. JONES, G. HOOGENBOOM, N.B. PICKERING, W.D. BATCHELOR

AND

W.T. BOWEN

University of Florida, University of Georgia and International Fertilizer Development Center

CROPGRO–SOYBEAN J.W. JONES, K.J. BOOTE, G. HOOGENBOOM, W.T. BOWEN, N.B. PICKERING AND

W.D. BATCHELOR

University of Florida, University of Georgia and International Fertilizer Development Center

C R O P S I M – C A S S AVA R.B. MATTHEWS, L. A. HUNT, P. W. WILKENS, G. HOOGENBOOM

AND

W.T. BOWEN

University of Guelph, International Fertilizer Development Center and University of Georgia

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

98

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models •

PREFACE The information presented in the example and output sections of this Part is representative of the results you can produce from your copy of the DSSAT v3 crop models. These are examples only, however, and your results may vary slightly from the results you receive, due to the evolutionary nature of the crop models. Incremental improvements, many suggested by users as they calibrate and validate the models with their own data sets, are constantly being evaluated and implemented. Therefore, post-press changes to the models may reflect improvements implemented after printing of this Volume.

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

99

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

100

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models •

CHAPTER ONE . INTRODUCTION The crop models developed under the auspices of the International Benchmark Sites Network for Agrotechnology Transfer (IBSNAT) Project are process oriented computer models which simulate growth, development, and yield as a function of plant genetics, weather and soil conditions, and crop management selections. These include models for the following crops: aroids (Colocasia esculenta L. [taro] & Xanthosoma sagittifolium L.[tannier]), barley (Hordeum vulgare L.), cassava (Manihot esculenta L.), corn (Zea mays L.), dry bean (Phaseolus vulgaris L.), millet (Pennisetum americanum L.), peanut (Arachis hypogea L.), potato (Solanum tuberosum L.), rice (Oryza sativa L.), sorghum (Sorghum bicolor L.), soybean (Glycine max [L.] Merr.) and wheat (Triticum eastivum L.). In the Decision Support System for Agrotechnology Transfer (DSSAT) v2.1 (IBSNAT 1989; Jones et al. 1990) individual models existed for each crop (Table 1). As part of the move to DSSAT v3, crop models were combined to avoid coding duplication and other problems associated with model improvement. For the family of grain legume crops a generic model was developed called CROPGRO, which is being extended to include other crops, such as tomato. The grain cereals, except for CERES-Rice, were combined into a generic grain cereal model called CERES. Development of the root crop models will continue as separate models. Previously, individual userÕs guides were developed for the crop models SOYGRO (Jones et al., 1989), PNUTGRO (Boote et al., 1989), BEANGRO (Hoogenboom et al., 1991), CERES-Wheat (Godwin et al., 1989), CERES-Maize (Ritchie et al., 1989), CERES-Barley (Otter-Nacke et al., 1991), and CERES-Rice (Singh et al., 1993). In DSSAT v3, one model user-interface was developed for use by all crop models, and thus, one userÕs guide. Since, however, these crop models can also be run as stand-alone models, there is some flexibility as to how the executables, input and output files are organized on a computer disk. The organization of these files for running under both the DSSAT v3 Shell (Volume 1-3, Hunt et al. 1994) and as stand alones is described in Appendix C of this Part. The operation of the crop models in DSSAT v3 using the DSSAT v3 Shell (Volume 1-3, Hunt et al. 1994) interface is described herein.



DSSAT v3, Volume 2



DSSAT v3, Volume 2



DSSAT v3, Volume 2



DSSAT v3, Volume 2



DSSAT v3, Volume 2



DSSAT v3, Volume 2



DSSAT v3,

101

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

TABLE 1.

OLD AND NEW GENERATION CROP SIMULATION MODELS.

Crop

DSSAT v2.1 Model

DSSAT v3 Model

Reference

Barley Corn (Maize) Millet Rice Sorghum

CERES-BarleY CERES-Maize CERES-Millet CERES-Rice CERES-Sorghum

Generic CERES Generic CERES Generic CERES CERES-Rice Generic CERES

Wheat

CERES-Wheat

Generic CERES

Otter-Nacke et al. (1991) Ritchie et al.(1989) Singh et al. (1991) Singh et al. (1993) Alargarswamy and Ritchie (1991) Godwin et al. (1989)

CROPGRO CROPGRO CROPGRO

Hoogenboom et al (1994) Boote et al. (1989) Jones et al. (1989)

N/A CROPSIM-Cassava N/A

Prasad et al. (1991) Matthews and Hunt (1994) Griffin et al. (1993)

Cereals

Grain Legumes Dry bean Peanut Soybean

BEANGRO PNUTGRO SOYGRO

Roots and Tubers Aroids Cassava Potato

SUBSTOR-Aroids N/A SUBSTOR-Potato

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

102

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models •

CHAPTER TWO . INPUTS AND OUTPUTS The DSSAT v3 crop models incorporate the input and output ASCII file structures fully described in Volume 2-1 (Jones et al. 1994) of this book. This I/O system is considerably different than the crop model inputs and outputs structures found in DSSAT v2.1 (IBSNAT 1989, 1990).

W E AT H E R Though daily weather formats are similar to those in DSSAT v2.1, additional features have been added to accommodate improved quality control of weather data. A space has been designated next to each data field for characters to document when data were filled from other sources and the reason for filling. The quality control options for weather data in DSSAT v3 are handled by WeatherMan, described in Volume 3-3 (Hansen et al. 1994) of this book. In the DSSAT v3 crop models, including CROPGRO and CERES, the name of the weather file is constructed internally from the weather file information contained in the experiment input file. The code for the weather file includes eight characters, such as UFGA8101, and the file UFGA8101.WTH would be constructed in the model code if observed weather data would be used as input, or the file UFGA8101.WTG would be constructed in the model code if externally generated weather data would be used as input. The model will look first in the current directory for this file. If the model is unable to locate the weather file in the current crop model data directory, the model will check the path specified by the DSSAT v3 path-declaration file (DSSATPRO.FLE). For a complete description of the weather file (FILEW) formats and structures, see Volume 2-1 (Jones et al. 1994) of this book.

SOIL The soil file has also been changed in DSSAT v3. First, more information was added in an attempt to make the soil inputs more generally applicable by other crop models. For example, clay and silt percentages are now included, and new inputs were defined to allow for simulation of soil phosphorus dynamics. The first release of the DSSAT v3 models will not include the phosphorus module in any of the crop models. Secondly, all new models use the same soil file, whereas models in DSSAT V2.1 required a separate soil file for each crop. The new soil file is usually named SOIL.SOL, but the models will accept soil profile data in input files specific for each ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

103

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

institute, e.g. UF.SOL would contain soil profile information defined by the University of Florida. The models will first look for the SOIL.SOL file in the ÒcurrentÓ path, and if the model is unable to locate the SOIL.SOL file, the model will try to locate the UF.SOL file. The file name UF.SOL is constructed by the models based on the institute code of the institute at which the experiment was performed. For a complete description of the soil file (FILES) formats and structures, see Volume 2-1 (Jones et al. 1994) of this book.

CROP MANAGEMENT In DSSAT v3, details of a crop experiment, such as field information, treatments, planting information, initial conditions, irrigation, residue and fertilizer management, and harvest information are contained in one single file. This single file is referred to as experiment details file or FILEX. A user can name FILEX based on institute id, site id, year, experiment number, and crop code; the naming convention is similar to the one of DSSAT V2.1 (IBSNAT, 1989; 1990). For example, the file UFGA8101.SBX is the file name for a soybean experiment conducted in 1981 at the University of Florida in Gainesville (UFGA). The experiment details file FILEX is divided into sections; a Ò*Ó designates each section, and the file uses the symbol Ò@ Òin column 1 of lines that contain codes or headers for variables defined in the section following this header line. The file uses Ò!Ó to define comment lines; blank lines can also be used in the file to delineate data input blocks and these lines are ignored by the model when reading the experiment details file. For a complete description of the experiment details file (FILEX) formats and structures, see Volume 2-1 (Jones et al. 1994) of this book.

S I M U L AT I O N C O N T R O L Each DSSAT v3 experiment details file FILEX contains a *SIMULATION CONTROL section that fully specifies all options for a simulation run. This section also defines automatic management characteristics for planting, irrigation, fertilizer, residue, and harvest. These automatic management options allow the user to define management conditions for hypothetical Òexperiments.Ó For a complete description of the Simulation Controls section of FILEX, see Volume 21(Jones et al. 1994) of this book.

A V E R A G E F I N A L F I E L D D ATA The DSSAT v3 models use two files for field observed data and other related information. The first file contains averages of field observations, and this information is used for comparison between model simulated data and field observed

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

104

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models •

TABLE 2. AVERAGE FINAL FIELD DATA FILE. (FILEA = “UFGA7801.SBA”) *EXP.DATA (A): UFGA7801SB BRAGG, IRRIGATED & NON-IRRIGATED @TRNO HWAM HWUM H#AM 1 3041. .1440 2223. 2 1178. .1230 969.

H#UM 1.96 1.85

LAIX CWAM BWAH 4.67 6068. 1958. 4.50 3491. 1756.

ADAT 211 211

MDAT 282 282

PD1T 233 233

PDFT PWAM 233 4009. 233 1602.

HIAM THAM .501 75.85 .337 73.53

data to calibrate, validate and test the models. The field average observational data file is called FILEA. For the example used in the Crop Management section above, this file would be called UFGA8101.SBA. The format for FILEA in DSSAT v3 is different from the format of FILEA in DSSAT v2.1. Generally, the data in FILEA are in stored in columns, which are each 6 characters in width, with a header above each column indicating the type of data in that column. The crop model uses the same header information for its outputs, so that corresponding simulated and observed data can be matched regardless of the location of these columns in the input files. An abbreviation file (DATA.CDE) defines these headers, including appropriate units of the variables and values associated with those headers. These abbreviations are also used by the data handling components of DSSAT v3, graphics, and seasonal and sequence analysis programs. An example of a FILEA is shown in Table 2. For a description of FILEA formats and structures, see Volume 2-1 (Jones et al. 1994) of this book.

T I M E - C O U R S E F I E L D D ATA In addition to FILEA, a second file is used to store field data for within-season measurements. This time-course data file, FILET, can contain an unlimited number of 6-character columns. Data that were measured in the field can be stored in this file, and these can include both measured soil, plant, and pest information as a function of day of year. For example FILET, e.g. UFGA8101.SBT, is the time course file for an experiment conducted the University of Florida in Gainesville in 1981. An example of a FILET is shown in Table 3. For a description of FILET formats and structures, see Volume 2-1 (Jones et al. 1994) of this book.

OUTPUT FILES Outputs from the models are written to the following files: OVERVIEW.OUT which contains a copy of the output as shown on the computer screen during the simulation; ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

105

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

SUMMARY.OUT which contains a one line summary of the main developmental events, water and nitrogen variables, and yield and yield components; GROWTH.OUT, which contains a summary of the growth balance variables over time; WATER.OUT, which contains a summary of the soil and plant water variables over time; NITROGEN.OUT, which contains a summary of the soil and plant nitrogen variables over time; CARBON.OUT, which contains a summary of some of the main soil and plant carbon variables; and PEST.OUT, which contains a summary of the pest variables as a function of time. FILES GROWTH.OUT, WATER.OUT, NITROGEN.OUT, CARBON.OUT, and PEST.OUT contain time-series outputs at steps as small as one day or as large as specified by the user. Each file can be switched on or off, and the frequency of daily outputs can be specified in the Simulation Control section of FILEX. These output files are temporary and are erased and overwritten at the start of each new simulation run. Users, however, can select an option to save these files with experiment specific file names. This option can be fixed permanently through one variable in FILEX or interactively through the Sensitivity Analysis option. For example, the above described 1981 University of Florida experiment output files could be saved as UFGA8101.SBO, UFGA8191.SBS, UFGA8191.SBG, UFGA8101.SBW, UFGA8101.SBN, UFGA8101.SBC, and UFGA8101.SBD, respectively. For a description of these file formats and structures, see Volume 2-1 (Jones et al. 1994) of this book

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V • DSSAT v3, Volume 2 •

106

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models •

TABLE 3. TIME-COURSE FIELD DATA FILE. (FILET = “UFGA7801.SBT”) *EXP.DATA (T): UFGA7801SB BRAGG, IRRIGATED & NON-IRRIGATED @TRNO 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DATE 78194 78201 78208 78215 78222 78229 78236 78243 78250 78257 78264 78271 78278 78285 78292

LAID .89 1.28 1.91 2.86 4.17 3.90 4.66 4.47 4.44 3.99 4.67 2.83 2.09 .47 .09

SWAD 178 300 551 943 1561 1956 2947 3144 3303 3326 3657 2732 2515 1851 2064

GWAD 0. 0. 0. 0. 0. 0. 0. 0. 182 754 1912 2223 2730 2913 3169

LWAD 266 366 656 843 1187 1204 1723 1772 1631 1568 1769 1180 858 170 34

CWAD 444 667 1207 1786 2748 3160 4792 5224 5740 6507 8586 7144 7136 5866 6270

PWAD 0. 0. 0. 0. 0. 0. 123 308 805 1613 3161 3232 3763 3845 4172

SHAD 0. 0. 0. 0. 0. 0. 123 308 623 859 1249 1009 1033 932 1003

SH%D 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 22.60 46.75 60.49 68.78 72.55 75.76 75.96

SLAD 334.6 349.7 291.2 339.3 351.3 323.9 270.5 252.3 272.2 254.5 264.0 239.8 243.6 276.5 264.7

HIAD 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.030 0.116 0.222 0.311 0.383 0.497 0.505

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

78194 78201 78208 78215 78222 78229 78236 78243 78250 78257 78264 78271 78278 78285 78292

.75 1.08 1.81 3.29 4.38 4.30 4.21 4.50 2.09 3.24 2.30 1.14 .85 .53 .07

160 251 535 1080 1663 2083 2556 2673 1998 2650 2609 2113 1905 1922 1590

0. 0. 0. 0. 0. 0. 0. 0. 42 253 471 775 782 1149 1206

244 311 626 974 1261 1392 1517 1439 838 1220 931 498 371 236 30

405 563 1161 2054 2923 3475 4184 4431 3104 4530 4440 3812 3398 3732 3250

0. 0. 0. 0. 0. 0. 112 319 268 661 901 1200 1122 1574 1630

0. 0. 0. 0. 0. 0. 112 319 226 408 430 425 340 425 424

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 15.67 38.28 52.28 64.58 69.70 73.00 73.99

307.4 347.3 289.1 337.8 347.3 308.9 277.5 312.7 249.4 265.6 247.0 228.9 229.1 224.5 233.3

0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.014 0.056 0.106 0.203 0.230 0.308 0.371

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

107

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

108

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models •

CHAPTER THREE . SYSTEM OVERVIEW F L O W O F I N F O R M AT I O N The DSSAT v3 crop simulation models consist of three modules: model driver, input module and crop simulation module. Figure 1 presents a schematic overview of these modules. The main difference with the DSSAT v2.1 models is that the input and sensitivity analysis section of each model is now separated from its model simulation section. In DSSAT v3, one input and sensitivity module is used by all crop simulation models. When a user starts a DSSAT v3 model,

MODEL DRIVER

INPUT MODULE

EXPERIMENTAL DETAILS FILE

MODEL DRIVER

TEMPORARY FILE

CROP SIMULATION MODULE

OUTPUT FILES

MODEL DRIVER Y

MORE SIMULATION ?

N

FIGURE 1. FLOW OF INFORMATION SIMULATION MODELS.

FOR THE

CURRENT DSSAT

V3

CROP

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

109

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

the model driver program, MDRIV940.EXE, is executed. The driver program calls the model input module, MINPT940.EXE, which reads the experiment list file (EXP.LST) and experiment data file (FILEX). While reading these files, the input module displays various screens, including those for experiment and treatment selection options. When a user has selected and/or modified the options available in the sensitivity analysis section, a temporary file is written. Control is given back to the model driver and the simulation module is called (IBSNAT30.INP). The simulation module does not provide any interaction with the user; instead it reads the temporary input file, simulates growth over a season and outputs simulation results on the screen. Upon completion of a simulation, control is returned to the model driver, and a user can then choose to run another simulation run or terminate the simulation. The format of the temporary file (IBSNAT30.INP) is discussed later in this chapter.

COMPONENT STRUCTURE CROP MODEL DRIVER

Because the crop model driver was developed to control the calling of the input and the crop simulation modules, all EXE files need to be located in the same directory for the system to work properly (Figure 2). Typically, this would be the C:\DSSAT3 directory. The models, however, can be run from any data directory, as long as the path where the EXE files are located is specified. To run a model, the driver is executed from the directory containing input data, and the names of the input module and the crop module are specified as command-line arguments. The default syntax is the following (see next page): MDRIV940.EXE (Dssat V3 Crop Model Driver)

FILEX

MINPT940.EXE

(Experimental Details File)

(Model Input Module)

CROP SIMULATION EXE Modules

IBSNAT30.INP (Temporary File)

SOIL.SOL (Soil Input File)

OVERVIEW.OUT

GROWTH.OUT

WATER.OUT

NITROGEN.OUT

?????940.CUL (Cultivar Input File)

FIGURE 2.

DSSAT

SUMMARY.OUT

V3

CROP SIMULATION MODULES

AND

PEST.OUT

CARBON.OUT

PHOSPHOR.OUT

INPUT/OUTPUT FILE HANDLING.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

110

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models •

\PATH\MDRIV940.EXE MINPT940.EXE CRGRO940.EXE where PATH is the path for all EXE files (e.g. C:\DSSAT3); MDRIV940.EXE is the name of the model driver; MINPT940.EXE is the name of the input module; and CRGRO940.EXE is the name of the crop simulation module. Current crop simulation modules available include : GECER940.EXE

- Generic CERES module for barley, maize, millet, sorghum, and wheat RICER940.EXE - CERES -Rice module for rice CRGRO940.EXE - Generic CROPGRO module for dry bean, peanut and soybean, CSSIM940.EXE - CROPSIM-Cassava module for cassava. Additional options can be included on the command line: \PATH\MDRIV940.EXE MINPT940.EXE CRGRO940.EXE TYPEIO RNMODE where TYPEIO is a one-character variable, used as a file type for transfer of information between the input module and crop simulation module. Options include : I or X -

A single treatment input file using FILEX format with no headers, blank lines comment lines. TYPEIO = ÒIÓ is used by the GECER940.EXE, RICER940.EXE, and CRGRO940.EXE crop simulation modules. FILEX single treatment format with headers and blank lines. TYPEIO = ÒXÓ is used by the CSSIM940.EXE crop simulation module.

RNMODE is a one-character variable, used to define the execution or operational mode of the model. Options include : I A G N Q S F -

Interactive simulation, allowing for sensitivity analysis screen selections; Run all treatments defined for one particular experiment; Run in the genetic coefficient estimator mode, used with GenCalc only (see Volume 3-4, Hunt et al. 1994, of this book); Run in the seasonal analysis mode, used with the seasonal analysis program only (see Volume 3-1, Thornton et al. 1994a, of this book); Run in the sequence analysis mode, used with the sequence analysis program only (see Volume 3-2, Thornton et al. 1994b, of this book); Run in the spatial analysis mode with Geographic Information Systems (GIS) only; Run in the farming systems analysis mode.

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

111

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

General users should not be concerned about these options, as they are controlled by individual driver programs. For all RNMODE options, except ÒI,Ó the experiment and treatment number can also be specified : \PATH\MDRIV940.EXE MINPT940.EXE CRGRO940.EXE TYPEIO RNMODE EXPARG TRNARG

where EXPARG is the experiment number and TRNARG is the treatment number. Both EXPARG and TRNARG are integers. The model driver program described here is normally used only for interactive simulations. Other components within DSSAT v3, such as the genetic coefficient calculator and seasonal analysis, sequence analysis and GIS programs, use their own driver programs to interface both with the model input module and crop simulation modules. MODEL INPUT MODULE

The current DSSAT v3 input module was designed to handle both the reading of FILEX and error checking, as well as to make available options by which the user can modify specific inputs in the Sensitivity Analysis section. An example of this option will be presented later in this chapter. The function of the model input module is to read the experiment details file (FILEX), extract the required information to run one treatment, and to create a temporary input file to be read by the crop simulation module. This allows for the addition of other crop simulation models to the system, since only a temporary output file needs to be created in the prescribed format for use by the DSSAT v3 crop simulation models. Without the model driver program, the following syntax is required to run the input module : \PATH\MINPT940.EXE CRGRO940.EXE FILEIO TYPEIO RNMODE EXPARG TRNARG

where CRGRO940.EXE is the crop simulation module, with options as specified earlier; FILEIO is the name of the temporary input file used to transfer information between the input module and the crop simulation module Ð this name is usually controlled by the driver program which runs the entire system. CROP SIMULATION MODULE

When the crop simulation module is executed, it reads the temporary input file, IBSNAT30.INP. This single treatment input file was created by the input module and

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

112

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models •

runs a single season simulation. The syntax to run a crop simulation module, without the model driver program, is the following : \PATH\CRGRO940.EXE FILEIO TYPEIO RNMODE REPARG The options specified on the command line are the same as those discussed for the input module, except for REPARG, which is the run number of the current simulation. It is critical that the correct file type be specified for the temporary file, since it contains the reduced input information for the crop model. Normally, FILEIO will be ÒIBSNAT30.INPÓ and TYPEIO will be ÒI.Ó TYPEIO can be set to ÒXÓ to create a single treatment version of FILEX, but only the CSSIM940.EXE crop simulation module will work with this option. The systemÕs flexibility is such that when a new crop simulation module is added, only the input module needs to be modified to specify the input file type of the new crop simulation module and a subroutine added to write the new format.

CROP MODEL EXECUTION In the above section, ÒComponent Structure,Ó of this Chapter, detailed information for the various command line arguments is included. In general, however, model users can ignore these individual options, since they are handled internally by the DSSAT v3 Shell, batch programs, or driver programs. Under the SETUP menu in the DSSAT v3 Shell (see Volume 1-3, Hunt et al. 1994, of this book), the user defines each individual module; that is, the crop model driver program (MDDRIV940.EXE), the crop model inputs module (MINPT940.EXE) and one of the crop simulation modules (e.g., GECER940.EXE, RICER940.EXE, CRGRO940.EXE or CSSIM940.EXE). In addition the user defines the file type of the intermediate file, which is set to ÒIÓ by default. The remainder of the controls are then handled by the DSSAT v3 Shell. If a user wants to run each module individually, all command line arguments need to be used correctly and input files need to be available, as some of the individual modules do not handle error checking.

H A R D WA R E A N D S O F T WA R E The DSSAT v3 crop simulation models were developed on personal computers, using Microsoft DOSª Versions 5 and 6, and the Microsoft Fortran Compilerª Version 5.1. The modules are coded in Fortran 77 to remain compatible with other platforms. The crop models have also been successfully implemented on VAX and SUN computers. ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

113

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

The crop models perform best on computers with 80386 or 80486 processor and math-coprocessors. Minimum memory requirements are 512 KByte of Random Access Memory. Harddisk requirements are at least 1 MByte for all executable and data files.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

114

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models •

CHAPTER FOUR . CREATING INPUT FILES Under the DSSAT v3 Shell main menu item, MODELS (see Volume 1-3, Hunt et al. 1994, of this book), there is a menu of crop models available, separated into grain cereals, grain legumes, root crops, and other crops (see Screen 1). A menu belonging to each group contains a listing of various crops or species for the group selected (see Screen 1 for those crops found under ÒLegumesÓ). Although in the DSSAT v3 system all three grain legume crops (dry bean, peanut, and soybean) are simulated with the same model (CROPGRO), users have the option to change the selected crop model through the SETUP menu in the DSSAT v3 Shell and replace it with their own model. Instructions for modifying the SETUP options are presented in Volume 1-3 (Hunt et al. 1994) of this book. If the soybean model is selected, for example, a menu appears (Screen 1), showing a list of available options in the logical sequence a user needs to follow in order to simulate a particular experiment. Five options are available under each crop model selection : 1. Creating a model input file. 2. Listing and managing crop model input files. 3. Running the crop model. 4. Listing and managing crop model output files. 5. Graphing simulated results and experimental data. DECISION SUPPORT SYSTEM FOR AGROTECHNOLOGY TRANSFER DATA

MODELS C L R O

ANALYSES

TOOLS

SETUP/QUIT

Cereals Legumes Rootcrops D Dry bean Other S Soybean P Peanut C Create I Inputs S Simulate O Outputs G Graph

Choose experiments, change inputs if required, and then simulate. ↑ ↓ → ←

ESC

moves through menu choices moves to higher menu level

Version : 3.0

SCREEN 1. ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

115

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

MODEL INPUT FILE FOR CROP MANAGEMENT The DSSAT v3 crop model input file (or the experiment details input file, FILEX) can be created through an interactive menu-driven program, XCreate, or through an ASCII text editor. It is important that the input file format be identical to that described in Volume 2-1 (Jones et al. 1994) of this book, including the use of Ò*Ó for header sections, Ò@Ó for header lines and Ò!Ó for comments. The input module uses these characters while reading FILEX for particular sections. It is strongly advised that the XCreate program be used to create FILEX (Screen 2) if a user is unfamiliar or uncomfortable with the strict formats of the input/output documentation (see Volume 2-1, Jones et al. 1994, of this book). Information on the XCreate program can be found in Volume 1-4 (Imamura 1994) of this book. An example of a model input file is found in Table 4. Critical sections of FILEX include the following : *TREATMENTS This defines the treatments of an experiment and the associated treatment factor levels.

File Experiment Management Controls Options



Trt = 1 1 0 0 [ ]

*EXP.DETAILS:UFG Treatments

NON-IRRIGATED

Cultivars *TREATMENTS @N R 0 C TNAME... Fields 1 1 0 0 IRRIGATE Soil Analysis 2 1 0 0 NON - IR Initial Conditions Planting *CULTIVARS @C CR INGENO CNAM Irrigation 1 SB IB0001 BRAG Fertilization Residue *FIELDS @L ID_FIELD WSTA. Tillage/Rotation ID_SOIL Chemicals 1 UFGA0001 UFGA7 Environment IBSB91001 Harvest *INITIAL CONDITIONS @C PCR ICDAT ICRT ICND ICRN ICRE 1 SB 78166 100 -99 1.00 1.00 @C ICBL SH20 SNH4 SN03 1 5 0.086 0.6 1.5 1 15 0.086 0.6 1.5

----FACTOR LEVELS-------IC MP MI MF MR MC MT ME MH SM 1 1 1 0 1 0 0 0 0 1 1 1 1 0 1 0 0 0 0 1

F1 Help

F4 Mineral N

F7 Save

Alt-X Exit

FLDS

FLST SLTX

0 00000 -99

SLDP 180

51264

SCREEN 2.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

116

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models •

TABLE 4.

CROP MODEL INPUT FILE. (FILEX = "UFGA7801.SBX")

*EXP.DETAILS: UFGA7801SB BRAGG, IRRIGATED & NON-IRRIGATED *TREATMENTS -------------FACTOR LEVELS-----------@N R O C TNAME.................... CU FL SA IC MP MI MF MR MC MT ME MH SM 01 1 1 0 IRRIGATED 1 1 0 1 1 1 0 1 0 0 0 0 1 02 1 1 0 NON - IRRIGATED 1 1 0 1 1 0 0 1 0 0 0 0 1 *CULTIVARS @C CR INGENO CNAME 1 SB IB0001 BRAGG *FIELDS @L ID_FIELD WSTA.... FLSA 1 UFGA0001 UFGA7801 -99 *INITIAL @C PCR 1 SB @C ICBL 1 5 1 15 1 30 1 45 1 60 1 90 1 120 1 150 1 180

FLOB FLDT 0 DR000

FLDD 0

FLDS FLST SLTX 0 00000 -99

SLDP ID_SOIL 180 IBSB910015

PLRD 0

PAGE PENV PLPH -99 -99.0 -99.0

CONDITIONS ICDAT ICRT 78166 100 SH2O SNH4 0.086 0.6 0.086 0.6 0.086 0.6 0.086 0.6 0.086 0.6 0.076 0.6 0.076 0.6 0.130 0.6 0.258 0.6

ICND -99 SNO3 1.5 1.5 1.5 1.5 1.5 0.6 0.5 0.5 0.5

ICRN 1.00

ICRE 1.00

*PLANTING DETAILS @P PDATE EDATE PPOP 1 78166 -99 29.9

PPOE 29.9

PLME S

PLDS R

PLRS 91

IAME -99

IAMT -99

*IRRIGATION AND WATER MANAGEMENT @I EFIR IDEP ITHR IEPT IOFF 1 0.75 -99 -99 -99 -99 @I IDATE IROP IRVAL 1 78181 IR001 13 1 78230 IR001 13 1 78235 IR001 13 1 78237 IR001 13 1 78240 IR001 11 1 78242 IR001 11 1 78244 IR001 11 1 78246 IR001 11 1 78250 IR001 11 1 78253 IR001 11 1 78256 IR001 8 1 78259 IR001 8

PLDP 4.0

PLWT -99

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

117

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

1 1 1 1 1 1 1

78262 78265 78269 78272 78279 78283 78294

IR001 IR001 IR001 IR001 IR001 IR001 IR001

8 8 7 8 7 8 10

*RESIDUES AND OTHER ORGANIC MATERIALS @R RDATE RCOD RAMT RESN RESP RESK 1 78166 RE001 1000 0.8 -9 -9 *SIMULATION CONTROLS @N GENERAL NYERS 1 GE 1 @N OPTIONS WATER 1 OP Y @N METHODS WTHER 1 ME M @N MANAGEMENT PLANT 1 MA R @N OUTPUTS FNAME 1 OU N @ @N 1 @N 1 @N 1 @N 1 @N 1

RINP

RDEP 15

NREPS 1 NITRO Y INCON M IRRIG R OVVEW Y

START S SYMBI Y LIGHT E FERTI R SUMRY Y

YRDAY 78166 PHOSP N EVAPO R RESID R FROPT 3

RSEED 2150 POTAS N INFIL S HARVS M GROTH Y

SNAME.................... BRAGG, IRRIGATED & NON-IR DISES N PHOTO C

AUTOMATIC MANAGEMENT PLANTING PFIRST PLAST PL 155 200 IRRIGATION IMDEP ITHRL IR 30 50 NITROGEN NMDEP NMTHR NI 30 50 RESIDUES RIPCN RTIME RE 100 1 HARVEST HFIRST HLAST HA 0 365

PH2OL 40 ITHRU 100 NAMNT 25 RIDEP 20 HPCNP 100

PH2OU 100 IROFF GS000 NCODE FE001

PH2OD PSTMX PSTMN 30 40 10 IMETH IRAMT IREFF IR001 10 0.75 NAOFF GS000

CARBN WATER NITRO MINER DISES Y Y Y N N

LONG Y

HPCNR 0

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

118

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models •

*CULTIVARS This defines the crop (CR) and cultivar (INGENO) which will be simulated. *FIELDS This defines the weather station (WSTA) and soil profile (ID_SOIL) which will be used as inputs. *INITIAL CONDITIONS This defines the initial soil water (SH2O) and nitrogen conditions at the start of simulation (SNH4 + SNO3). *PLANTING DETAILS This defines the planting date (PDATE), plant density (PPOP), row spacing (PLRS) and planting depth (PLDP) at planting. *IRRIGATION AND WATER MANAGEMENT This defines the dates (IDATE) and amounts (IRVAL) of irrigation applications. *FERTILIZERS This defines the dates (FDATE), amount (FAMN) and types (FMDC) of fertilizer applications. *ENVIRONMENT MODIFICATIONS This defines environmental modifications related to weather conditions. *HARVEST DETAILS This defines final harvest date ((HDATE) and other harvest parameters. *RESIDUES AND OTHER ORGANIC MATERIALS This defines initial residue from the previous crop present at the start of simulation. The importance of the above sections depends on the treatment factor levels selected in the *TREATMENT section. *SIMULATION CONTROLS This section is critical, since it defines the various options available for simulation, such as water balance and nitrogen balance simulation, crop management options, and defines the output files and output frequency. Volume 2-1 (Jones et al. 1994) of this book presents additional details about the specifics of each input section and the headers and header abbreviations for FILEX and various examples.

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

119

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

EXPERIMENT LIST FILE The models require an experiment list file (FILEL) to display the various experiments available for simulation (Table 5). The XCreate program updates the experiment list after each new FILEX is created by a user. In addition, DSSAT v3 has an experiment File Manager utility that is accessed by selecting the ÒI InputsÓ option under the MODELS menu of the DSSAT v3 Shell (Screen 1). The File Manager utility allows the user to either include or exclude a particular experiment from the experiment list file, and also includes options to edit a particular experiment data file and search and sort. For a description of this utility, see Volume 1-3 (Hunt et al. 1994) of this book.

TABLE 5.

EXPERIMENT LIST FILE. (FILEL = "EXP.LST")

*EXPERIMENT LIST @# 1 2 3 4 5 6 7

FILENAME IUCA7901 UFGA7801 UFGA7802 UFGA7901 UFGA8101 UFQU7901 UFQU7902

EXT SBX SBX SBX SBX SBX SBX SBX

ENAME WAYNE, IRRIGATED & NON-IRRIGATED BRAGG, IRRIGATED & NON-IRRIGATED BRAGG, IRR*INSECT DAMAGE IRRIGATION 3I COBB, IRRIGATED, VEG. & REPROD. STRESS BRAGG, WELL IRRIGATED BRAGG, DEFOLIATION STUDY

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

120

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

CHAPTER FIVE . RUNNING THE CROP MODELS Once a user has created a FILEX and the experiment list file (FILEL) has been updated, a crop model can be run, by selecting the ÒSimulateÓ option as shown in Screen 1. A screen displaying the name of the model, the model developers and the institutions which have been involved in model development will be presented. Screen 3 below, for CROPGRO, is an example of the screen which will be presented.

IBSNAT 3.0 Generic Input

CROPGRO 3.00 (93.0)

G. Hoogenboom, J.W. Jones, K.J. Boote, W.T. Bowen, N.B. Pickering, W.D. Batchelor, and J.W. White The University of Georgia & University of Florida CROPGRO simulates crop growth and development, soil water dynamics and soil nitrogen dynamics in response to weather, soil characteristics, cultivar characteristics, and crop management. This version simulates soybean, peanut and drybean crops. It uses the IBSNAT standard data formats and files for DSSAT v3.

September 1994 10-October-1993

Please press < ENTER > key (↵) to continue

SCREEN 3.

Pressing the or key in this screen will present Screen 4 (on following page), which displays a list of experiment case studies that can be used for simulation.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v 3, Volume

121

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

1. 2. 3. 4. 5. 6. 7.

CROP ---SB SB SB SB SB SB SB

EXPERIMENTAL CASE STUDIES ------------------------WAYNE, IRRIGATED & NON-IRRIGATED BRAGG, IRRIGATED & NON-IRRIGATED BRAGG, IRR*INSECT DAMAGE IRRIGATION 3I COBB, IRRIGATED, VEG. & REPROD. STRESS BRAGG, WELL IRRIGATED BRAGG, DEFOLIATION STUDY

EXPERIMENT SELECTED ===> NEW SELECTION ? --->

INST. SITE ID ID ---- ---CA IU GA UF GA UF GA UF GA UF QU UF QU UF

YEAR EXPT. NO ---- ---1979 01 1978 01 1978 02 1979 01 1981 01 1979 01 1979 02

1 2

SCREEN 4.

What is displayed on Screen 4 is actually a listing of FILEL (see Table 5). Any one of these experiments can be selected for simulation. Each item in the list may represent an actual experiment or a hypothetical one created to predict how a crop would perform under specified conditions. For the example shown, Experiment Ò2Ó was selected, which was a soybean experiment, conducted in 1978 at the University of Florida in Gainesville When this experiment is selected, Screen 5 (shown below) is presented.

BRAGG, IRRIGATED & NON-IRRIGATED -------------------------------1. IRRIGATED 2. NON - IRRIGATED 3. RUN ALL TREATMENTS TREATMENT SELECTED ====> NEW SELECTION ? ====>

INST. SITE YEAR EXPT. TRT. NO NO ID ID ---- ---- ---- ---- ---GA 1978 01 1 UF GA 1978 01 2 UF GA 1978 01 UF

1 1

SCREEN 5.

Screen 5 displays the treatments of Experiment Ò2Ó selected in Screen 4. For this experiment, there are two treatments, irrigated (Option 1) and non-irrigated (Option 2). In addition, in Screen 5, a user can choose to have the model simulate all treatments of the particular experiment (Option 3). For this example experiment, Option 1 was selected.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

122

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

When the experiment and the treatment have been selected, Screen 6 (below) is presented.

What Would You Like To Do? 0. Run Simulation 1. Select Sensitivity Analysis Options. CHOICE ?

[ Default = 0 ] ===> 0

Please enter Run

1 name : ===> Example

SCREEN 6.

In Screen 6, the user can choose to run either a simulation (Option 0) or a sensitivity analysis (Option 1). Option 1 is discussed in some detail in Chapter 7, ÒManagement and Sensitivity Analysis Options.Ó For this example, Option 0, ÒRun Simulation,Ó was selected. Following the selection of Option 0, a prompt, as shown in Screen 6, is displayed, and the user is asked to enter a run identifier. This identifier can be any combination of words or characters up to a maximum of 25. For this example, ÒExampleÓ was entered.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v 3, Volume

123

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

SIMULATION OVERVIEW RUN 1 MODEL EXPERMIMENT TREATMENT 1 CROP STARTING DATE PLANTING DATE WEATHER SOIL SOIL INITIAL C WATER BALANCE IRRIGATION NITROGEN BAL. N FERTILIZER RESIDUE/MANURE ENVIRONM. OPT.

: : : :

: : : : : : : : : : : : : SIMULATION OPT : MANAGEMENT OPT :

Example CRGRO940 - SOYBEAN UFGA7801 SB BRAGG, IRRIGATED & NON-IRRGATED IRRIGATED SOYBEAN CULTIVAR : BRAGG - MATURITY GROUP7 JUN 15 1978 JUN 15 1978 PLANTS/m2 : 29.9 ROW SPACING : 91.cm UFGA 1978 IBSB910015 TEXTURE : - Millhopper Fine Sand DEPTH:180cm EXTR. H20:158.4mm N03: 22.9kg/ha NH4: 16.5kg/ha IRRIGATE ACCORDING TO FIELD SCHEDULE 190 mm IN 19 APPLICATIONS SOIL-N, N-UPTAKE & DYNAMIC N-FIXATION SIMULATION NO FERTILIZER APPLIED 1000 kg/ha IN 1 APPLICATIONS DAYL= .0 SRAD= .0 TMAX= .0 TMIN= .0 RAIN= .0 C02 = R 330.0 DEW = .0 WIND= .0 WATER :Y NITROGEN:Y N-FIX:Y PESTS :N PHOTO :C ET :R PLANTING:R IRRIG :R FERT :N RESIDUE:R HARVEST:M WTH:M

Please press < ENTER > key to continue

SCREEN 7.

Screen 7 (above) displays an overview of the inputs and simulation data for the experiment selected in Screen 4. These data include crop, cultivar and maturity group information; start of simulation and planting dates; row and plant spacing; weather site and year; general soil profile information and initial conditions at the start of simulation; water balance simulation option and irrigation management; nitrogen balance simulation, nitrogen fertilizer management and organic residue; environmental or weather variable modifications; and a summary of simulation and management options.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

124

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

SUMMARY OF SOIL AND GENETIC INPUT PARAMETERS SAT SOIL LOWER UPPER SW DEPTH LIMIT LIMIT cm3/cm3 cm3/cm3 cm 0- 5 5- 15 15- 30 30- 45 45- 60 60- 90 90- 120 120- 150 150- 180

.023 .023 .023 .023 .023 .021 .020 .027 .070

.086 .086 .086 .086 .086 .076 .076 .130 .258

.230 .230 .230 .230 .230 .230 .230 .230 .360

TOT-180 5.5 21.4 45.3 SOIL ALBEDO : .18 RUNOFF CURVE # :66.00

EXTR INIT SW SW cm3/cm3

ROOT DIST

.086 .086 .086 .086 .086 .076 .076 .130 .258

1.00 1.00 .50 .29 .29 .38 .13 .06 .03

.063 .063 .063 .063 .063 .055 .056 .103 .188

BULK DENS g/cm3

pH

1.36 1.40 1.46 1.47 1.47 1.43 1.48 1.57 1.79

5.30 5.40 5.70 5.80 5.80 5.90 5.90 5.90 5.90

- kg/ha--> 15.8 21.4 key to continue

SCREEN 8.

Screen 8 displays more detailed information about the selected experimentÕs soil profile characteristics and cultivar characteristics. These include the lower limit, drained upper limit and saturated water content, extractable soil water, initial soil water content, relative root distribution, bulk density, pH, initial NO3 and NH4, and organic carbon for each soil layer, and total amount in the profile. Also shown are some of the soil surface characteristics such as soil albedo, first stage evaporation limit, soil nitrogen mineralization factor, SCS runoff curve number, and a drainage rate. The fertility factor is currently used only in the grain legume models to account for mineral deficiencies not simulated in the current version of the model or unknown factors that limit growth in a particular soil. The cultivar characteristics are crop specific and are discussed in Appendix A, ÒGenetic Coefficients.Ó As shown in this example for soybean, cultivar coefficients include the critical short day for photoperiod sensitivity (CSDVAR); relative sensitivity to photoperiod (PPSEN); optimum number of days from emergence to flowering (EMG-FLW); optimum number of days from flowering to first seed (FLW-FSD); optimum number of days from first seed to physiological maturity (FSD-PHM), individual seed weight (WTPSD); number of seeds per pod (SDPDVR); seed filling duration (SDFDUR) and pod filling duration (PODDUR); and relative biomass partitioning between vegetative and reproductive structures (XFRUIT). Screens 7 and 8 are displayed during the initialization of the model. Following these initialization screens, Screen 9 (shown on following page) is presented, DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v 3, Volume

125

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

which is displayed during the actual model simulation. All the variables shown in this screen are predicted variables. SIMULATED CROP AND SOIL STATUS AT MAIN DEVELOPMENT STAGES RUN NO.

1

Example

DATE CROP GROWTH AGE STAGE 15 15 21 21 28 2 31 22 22 29 29 1 1 11 23 23

JUN JUN JUN JUN JUN JUL JUL AUG AUG AUG AUG SEP OCT OCT OCT OCT

0 0 6 6 13 17 46 68 68 75 75 78 108 118 130 130

BIOMASS kg/ha

START SIM SOWING EMERGENCE END JUVEN. UNIFOLIATE FLOWER IND FIRST FLWR FIRST POD FIRST POD END MSNODE END LEAF FIRST SEEND END POD PHYS. MAT HARV. MAT HARVEST

0 0 21 21 60 116 1854 4340 4340 5304 5304 5710 7469 7747 6107 6107

LAI

LEAF NUM.

.00 .00 .03 .03 .11 .20 3.25 5.22 5.22 5.19 5.19 5.13 3.36 2.89 .19 .19

.0 .0 .1 .1 1.2 2.1 8.8 13.9 13.9 15.4 15.4 15.4 15.4 15.4 15.4 15.4

ET mm 0 0 3 3 11 20 128 230 230 268 268 285 401 431 448 448

RAIN IRRIG mm mm 0 0 2 2 10 10 274 518 518 518 518 518 534 534 534 534

0 0 0 0 0 13 13 26 26 63 63 85 165 180 190 190

SWATER mm 158 158 157 157 157 157 186 149 149 139 139 138 98 78 69 69

CROP kg/ha 0 0 1 1 3 5 61 156 156 185 185 196 245 263 224 224

N % .0 .0 5.1 5.1 5.1 4.3 3.3 3.6 3.6 3.5 3.5 3.4 3.3 3.4 3.7 3.7

STRESS H2O N .00 .00 .00 .00 .00 .03 .00 .00 .00 .00 .00 .00 .13 .32 .47 .47

.00 .00 .06 .06 .26 .32 .27 .01 .01 .00 .00 .00 .01 .07 .10 .10

Please press < ENTER > key to continue

SCREEN 9.

Each model is initialized at the start of simulation date, as specified in the input file. All models operate at daily time steps; thus, growth, development and other variables are incremented daily. Each crop model predicts the critical growth stages for that particular crop as shown in Screen 9 (above) for soybean. At each stage, total biomass, leaf area index (LAI), total number of leaves on the main stem and total nitrogen (CROP) and nitrogen concentration (N) are shown. These variables relate mainly to the carbon and nitrogen balance of the models. In addition, some soil and plant water variables are shown, such as total evapotranspiration (ET), total rainfall received and irrigation applied, and plant extractable soil water. The last two columns in Screen 9 show plant water and nitrogen stress averages calculated from the time of the previous stage until the current stage. When the last stage, e.g., ÒHARVESTÓ for this example, appears, the simulation has ended. The actual time it will take from the start of simulation, ÒSTART SIM,Ó until final harvest, can vary from a few seconds to a few minutes, depending on computer hardware and the crop management options selected.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

126

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

VARIABLE ANTHESIS DATE (dap) FIRST PEG / POD (dap) FIRST SEED (dap) PHYSIOLOGICAL MATURITY (dap) POD YIELD (kg/ha) SEED YIELD (Kg/ha) SHELLING PERCENTAGE (%) WEIGHT PER SEED (g) SEED NUMBER (SEED/m2) SEEDS/POD MAXIMUM LAI (m2/m2) BIOMASS (kg/ha) AT ANTHESIS BIOMASS N (kg N/ha) AT ANTHESIS BIOMASS (kg/ha) AT HARVEST MAT. STALK (kg/ha) AT HARVEST MAT. HARVEST INDEX (kg/ha) FINAL LEAF NUMBER (MAIN STEM) SEED N (kg N/ha) BIOMASS N (kg N/ha) STALK N (kg N/ha) SEED N (%)

PREDICTED 46 68 78 118 3941 2932 74.41 .133 2202 2.05 5.25 1854 61 6107 2087 .480 15.41 187 224 20 6.37

MEASURED 45 67 67 116 4009. 3041. 75.85 .1440 2223. 1.96 4.67 -99 -99 6068. 1958. .501 -99 -99 -99 -99 -99

Please press < ENTER> key to continue

SCREEN 10.

After the seasonal results are presented in Screen 9, model predicted data can be compared with experimental data for the main development stages, yield and yield components, and some of the nitrogen variables (Screen 10, above). When no experiment data are available for a particular stage, a Ò-99Ó is displayed for that item.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v 3, Volume

127

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

ENVIRONMENTAL AND STRESS FACTORS ----------------------------------- ENVIRONMENT-----------------STRESS---------|--DEVELOPMENT PHASE--|-TIME-|-------WEATHER--------| |---WATER--| |-NITROGEN-| DURA TEMP TEMP SOLAR PHOTOP PHOTO GROWTH PHOTO GROWTH RAD [day] SYNTH MIN SYNTH TION MAX hr MJ/m2 oC days oC Emergence -First Flower First Flower-First Seed First Seed - Phys. Mat. Emergence - Phys. Mat.

40 32 40 112

33.04 33.33 31.95 32.73

22.20 21.71 19.39 21.06

19.34 19.55 16.82 18.50

13.74 13.03 11.98 12.91

.000 .000 .099 .035

.004 .000 .179 .066

.000 .000 .098 .035

.273 .006 .022 .107

(0.0 = Minimum Stress 1.0 = Maximum Stress)

SOYBEAN

YIELD :

2932 kg/ha

[DRY WEIGHT]

Do you want to run more simulations? Y or N ? [Default = "N"] ===> N

SCREEN 11.

Screen 11 (above), the final screen in this series, displays a summary of environmental variables derived during the main developmental stages, which include the vegetative growth phase until flowering, the vegetative and reproductive development growth phase from flowering until the start of seed growth, and the reproductive growth phase from beginning seed growth until physiological maturity. To simulate another treatment or another experiment, a user needs to enter a ÔYÕ at the prompt. An ÔNÕ entry ends the crop model simulation and the user can then print out or graph the simulated results. For a description of the graphing and printing options, see Chapter 7, ÒDisplaying Results.Ó Screens 7 through 11, which appear on the monitor during an interactive simulation, are stored in a model output file, OVERVIEW.OUT. This file, in ASCII text format, is 80 characters wide, making it easy to either edit this file or print it to a dot matrix or laser printer. Example listings of the OVERVIEW.OUT file is shown in Table 6A for CERESMaize and Table 6B for CROPGRO-Soybean.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

128

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

TABLE 6A. CROP MODEL OUTPUT OVERVIEW FILE "OVERVIEW.OUT")

FOR

CERES-MAIZE. (OUTO =

*SIMULATION OVERVIEW FILE *RUN 1 MODEL EXPERIMENT TREATMENT 4 CROP STARTING DATE PLANTING DATE WEATHER SOIL SOIL INITIAL C WATER BALANCE IRRIGATION NITROGEN BAL. N FERTILIZER RESIDUE/MANURE ENVIRONM. OPT.

: : : :

Example CERES-Maize GECER940 - MAIZE UFGA8201 MZ N X IRRIGATION, GAINESVILLE IRRIGATED HIGH NITROGEN

: : : : : : : : : : : :

MAIZE CULTIVAR : McCurdy 84aa FEB 25 1982 FEB 26 1982 PLANTS/m2 : 7.2 ROW SPACING : 61.cm UFGA 1982 IBMZ910014 TEXTURE : FSA - Millhopper Fine Sand DEPTH:180cm EXTR. H2O:160.9mm NO3: 14.9kg/ha NH4: 21.1kg/ha IRRIGATE ACCORDING TO FIELD SCHEDULE 264 mm IN 16 APPLICATIONS SOIL-N & N-UPTAKE SIMULATION; NO N-FIXATION 401 kg/ha IN 7 APPLICATIONS 1000 kg/ha IN 1 APPLICATIONS DAYL= .0 SRAD= .0 TMAX= .0 TMIN= .0 RAIN= .0 CO2 = R 330.0 DEW = .0 WIND= .0 SIMULATION OPT : WATER :Y NITROGEN:Y N-FIX:N PESTS :N PHOTO :C ET :R MANAGEMENT OPT : PLANTING:R IRRIG :R FERT :R RESIDUE:R HARVEST:M WTH:M *SUMMARY OF SOIL AND GENETIC INPUT PARAMETERS SOIL LOWER UPPER SAT EXTR INIT ROOT BULK pH NO3 NH4 ORG DEPTH LIMIT LIMIT SW SW SW DIST DENS C cm cm3/cm3 cm3/cm3 cm3/cm3 g/cm3 ugN/g ugN/g % -------------------------------------------------------------------------------0- 5 .026 .096 .230 .070 .086 1.00 1.30 7.00 .60 1.50 2.00 5- 15 .025 .086 .230 .061 .086 1.00 1.30 7.00 .60 1.50 1.00 15- 30 .025 .086 .230 .061 .086 .80 1.40 7.00 .60 1.50 1.00 30- 45 .025 .086 .230 .061 .086 .20 1.40 7.00 .60 1.50 .50 45- 60 .025 .086 .230 .061 .086 .20 1.40 7.00 .60 1.50 .50 60- 90 .028 .090 .230 .062 .076 .10 1.45 7.00 .60 .60 .10 90-120 .028 .090 .230 .062 .076 .05 1.45 7.00 .60 .50 .10 120-150 .029 .130 .230 .101 .130 .00 1.45 7.00 .60 .50 .04 150-180 .070 .258 .360 .188 .258 .00 1.20 7.00 .60 .50 .24 TOT-180 6.2 22.3 45.3 16.1 21.4 14.9 21.1 87080 SOIL ALBEDO : .18 EVAPORATION LIMIT : 2.00 MIN. FACTOR : 1.00 RUNOFF CURVE # :60.00 DRAINAGE RATE : .65 FERT. FACTOR : .80 MAIZE CULTIVAR :IB0035-McCurdy 84aa ECOTYPE : P1 : 200.00 P2 : .3000 P5 : 940.00 G2 : 700.00 G3 : 8.000 PHINT : 75.000

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v 3, Volume

129

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

*SIMULATED CROP AND SOIL STATUS AT MAIN DEVELOPMENT STAGES RUN NO.

1

Example CERES-Maize

DATE CROP GROWTH BIOMASS LAI LEAF ET RAIN IRRIG SWATER CROP N STRESS AGE STAGE kg/ha NUM. mm mm mm mm kg/ha % H2O N -------------------------------------------------------------------------------25 FEB 0 Start Sim 0 .00 .0 0 0 0 152 0 .0 .00 .00 26 FEB 0 Sowing 0 .00 .0 1 0 0 151 0 .0 .00 .00 27 FEB 1 Germinate 0 .00 .0 1 0 0 151 0 .0 .00 .00 7 MAR 9 Emergence 29 .00 1.9 11 58 13 205 1 4.4 .00 .00 22 MAR 24 End Juveni 141 .30 7.5 23 60 23 161 5 3.9 .02 .00 27 MAR 29 Floral Ini 275 .52 9.0 35 103 23 179 11 3.9 .00 .01 12 MAY 75 75% Silkin 9251 4.64 23.7 214 361 142 165 194 2.1 .00 .03 22 MAY 85 Beg Gr Fil 11940 4.36 23.7 267 363 201 166 193 1.6 .00 .02 3 JUL 127 Maturity 23149 2.02 23.7 456 661 264 156 245 1.1 .00 .05 3 JUL 127 Harvest 23149 2.02 23.7 456 661 264 156 245 1.1 .00 .05

*MAIN GROWTH AND DEVELOPMENT VARIABLES @

VARIABLE PREDICTED ---------------FLOWERING DATE (dap) 75 PHYSIOL. MATURITY (dap) 127 GRAIN YIELD (kg/ha) 13769 WT. PER GRAIN (g) .2971 GRAIN NUMBER (GRAIN/m2) 3916 GRAINS/EAR 543.90 MAXIMUM LAI (m2/m2) 4.71 BIOMASS (kg/ha) AT ANTHESIS 9251 BIOMASS N (kg N/ha) AT ANTHESIS 194 BIOMASS (kg/ha) AT HARVEST MAT. 23149 STALK (kg/ha) AT HARVEST MAT. 11515 HARVEST INDEX (kg/kg) .595 FINAL LEAF NUMBER 23.75 GRAIN N (kg N/ha) 190 BIOMASS N (kg N/ha) 245 STALK N (kg N/ha) 55 SEED N (%) 1.64

MEASURED -------75 128 14060 0.309 3847. 496. -99 -99 -99 22001 10120 -99 -99 192.9 267.7 74.8 1.60

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

130

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

*ENVIRONMENTAL AND STRESS FACTORS ------------------------------------ENVIRONMENT-----------------STRESS---------|--DEVELOPMENT PHASE--|-TIME-|-------WEATHER--------| |---WATER--| |-NITROGEN-| DURA TEMP TEMP SOLAR PHOTOP PHOTO LEAF PHOTO LEAF TION MAX MIN RAD [day] SYNTH EXPAN. SYNTH EXPAN. days oC oC MJ/m2 hr ------------------------------------------------------------------------------Emergence-End Juvenile 15 28.06 13.01 17.17 11.75 .002 .023 .004 .009 End Juvenil-Floral Init 5 27.00 15.98 12.66 12.05 .000 .000 .003 .006 Floral Init-End Lf Grow 46 27.23 13.93 18.66 12.80 .000 .000 .026 .064 End Lf Grth-Beg Grn Fil 10 31.67 15.18 23.28 13.51 .000 .000 .022 .055 Grain Filling Phase 39 32.57 20.52 20.06 13.82 .000 .000 .031 .076 (0.0 = Minimum Stress 1.0 = Maximum Stress) MAIZE

YIELD :

13769 kg/ha [

219.3 bu/acre ]

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v 3, Volume

131

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

TABLE 6B. CROP MODEL OUTPUT OVERVIEW FILE (OUTO = "OVERVIEW.OUT")

FOR

CROPGRO-SOYBEAN.

*SIMULATION OVERVIEW FILE *RUN 1 MODEL EXPERIMENT TREATMENT 1 CROP STARTING DATE PLANTING DATE WEATHER SOIL SOIL INITIAL C WATER BALANCE IRRIGATION NITROGEN BAL. N FERTILIZER RESIDUE/MANURE ENVIRONM. OPT.

: : : :

Example CROPGRO - Soybean CRGRO940 - SOYBEAN UFGA7801 SB BRAGG, IRRIGATED & NON-IRRIGATED IRRIGATED

: : : : : : : : : : : :

SOYBEAN CULTIVAR : BRAGG - MATURITY GROUP 7 JUN 15 1978 JUN 15 1978 PLANTS/m2 : 29.9 ROW SPACING : 91.cm UFGA 1978 IBSB910015 TEXTURE : FSA - Millhopper Fine Sand DEPTH:180cm EXTR. H2O:158.4mm NO3: 22.9kg/ha NH4: 16.5kg/ha IRRIGATE ACCORDING TO FIELD SCHEDULE 190 mm IN 19 APPLICATIONS SOIL-N, N-UPTAKE & DYNAMIC N-FIXATION SIMULATION NO FERTILIZER APPLIED 1000 kg/ha IN 1 APPLICATIONS DAYL= .0 SRAD= .0 TMAX= .0 TMIN= .0 RAIN= .0 CO2 = R 330.0 DEW = .0 WIND= .0 SIMULATION OPT : WATER :Y NITROGEN:Y N-FIX:Y PESTS :N PHOTO :C ET :R MANAGEMENT OPT : PLANTING:R IRRIG :R FERT :N RESIDUE:R HARVEST:M WTH:M *SUMMARY OF SOIL AND GENETIC INPUT PARAMETERS SOIL LOWER UPPER SAT EXTR INIT ROOT BULK pH NO3 NH4 ORG DEPTH LIMIT LIMIT SW SW SW DIST DENS C cm cm3/cm3 cm3/cm3 cm3/cm3 g/cm3 ugN/g ugN/g % -------------------------------------------------------------------------------0- 5 .023 .086 .230 .063 .086 1.00 1.36 5.30 1.50 .60 .90 5- 15 .023 .086 .230 .063 .086 1.00 1.40 5.40 1.50 .60 .69 15- 30 .023 .086 .230 .063 .086 .50 1.46 5.70 1.50 .60 .28 30- 45 .023 .086 .230 .063 .086 .29 1.47 5.80 1.50 .60 .20 45- 60 .023 .086 .230 .063 .086 .29 1.47 5.80 1.50 .60 .20 60- 90 .021 .076 .230 .055 .076 .38 1.43 5.90 .60 .60 .09 90-120 .020 .076 .230 .056 .076 .13 1.48 5.90 .50 .60 .03 120-150 .027 .130 .230 .103 .130 .06 1.57 5.90 .50 .60 .03 150-180 .070 .258 .360 .188 .258 .03 1.79 5.90 .50 .60 .03 TOT-180 5.5 21.4 45.3 15.8 21.4 22.9 16.5 38949 SOIL ALBEDO : .18 EVAPORATION LIMIT : 5.00 MIN. FACTOR : 1.00 RUNOFF CURVE # :66.00 DRAINAGE RATE : .50 FERT. FACTOR : .84 SOYBEAN CULTIVAR :IB0001-BRAGG ECOTYPE :SB0701-MATURITY GROUP 7 CSDVAR :12.33 PPSEN : .32 EMG-FLW:19.50 FLW-FSD:17.00 FSD-PHM :36.00 WTPSD : .200 SDPDVR : 2.05 SDFDUR :26.00 PODDUR :15.00 XFRUIT : 1.00

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

132

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

*SIMULATED CROP AND SOIL STATUS AT MAIN DEVELOPMENT STAGES RUN NO.

1

Example CROPGRO - Soybean

DATE CROP GROWTH BIOMASS LAI LEAF ET RAIN IRRIG SWATER CROP N STRESS AGE STAGE kg/ha NUM. mm mm mm mm kg/ha % H2O N -------------------------------------------------------------------------------15 JUN 0 START SIM 0 .00 .0 0 0 0 158 0 .0 .00 .00 15 JUN 0 SOWING 0 .00 .0 0 0 0 158 0 .0 .00 .00 21 JUN 6 EMERGENCE 21 .03 .1 3 2 0 157 1 5.1 .00 .06 21 JUN 6 END JUVEN. 21 .03 .1 3 2 0 157 1 5.1 .00 .06 28 JUN 13 UNIFOLIATE 60 .11 1.2 11 10 0 157 3 5.1 .00 .26 2 JUL 17 FLOWER IND 116 .20 2.1 20 10 13 157 5 4.3 .03 .32 31 JUL 46 FIRST FLWR 1854 3.25 8.8 128 274 13 186 61 3.3 .00 .27 22 AUG 68 FIRST POD 4340 5.22 13.9 230 518 26 149 156 3.6 .00 .01 22 AUG 68 FIRST POD 4340 5.22 13.9 230 518 26 149 156 3.6 .00 .01 29 AUG 75 END MSNODE 5304 5.19 15.4 268 518 63 139 185 3.5 .00 .00 29 AUG 75 END LEAF 5304 5.19 15.4 268 518 63 139 185 3.5 .00 .00 1 SEP 78 FIRST SEED 5710 5.13 15.4 285 518 85 138 196 3.4 .00 .00 1 OCT 108 END POD 7469 3.36 15.4 401 534 165 98 245 3.3 .13 .01 11 OCT 118 PHYS. MAT 7747 2.89 15.4 431 534 180 78 263 3.4 .32 .07 23 OCT 130 HARV. MAT 6107 .19 15.4 448 534 190 69 224 3.7 .47 .10 23 OCT 130 HARVEST 6107 .19 15.4 448 534 190 69 224 3.7 .47 .10

*MAIN GROWTH AND DEVELOPMENT VARIABLES @

VARIABLE PREDICTED ---------------ANTHESIS DATE (dap) 46 FIRST PEG / POD (dap) 68 FIRST SEED (dap) 78 PHYSIOLOGICAL MATURITY (dap) 118 POD YIELD (kg/ha) 3941 SEED YIELD (kg/ha) 2932 SHELLING PERCENTAGE (%) 74.41 WEIGHT PER SEED (g) .133 SEED NUMBER (SEED/m2) 2202 SEEDS/POD 2.05 MAXIMUM LAI (m2/m2) 5.25 BIOMASS (kg/ha) AT ANTHESIS 1854 BIOMASS N (kg N/ha) AT ANTHESIS 61 BIOMASS (kg/ha) AT HARVEST MAT. 6107 STALK (kg/ha) AT HARVEST MAT. 2087 HARVEST INDEX (kg/kg) .480 FINAL LEAF NUMBER (MAIN STEM) 15.41 SEED N (kg N/ha) 187 BIOMASS N (kg N/ha) 224 STALK N (kg N/ha) 20 SEED N (%) 6.37

MEASURED -------45 67 67 116 4009. 3041. 75.85 .1440 2223. 1.96 4.67 -99 -99 6068. 1958. .501 -99 -99 -99 -99 -99

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v 3, Volume

133

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

*ENVIRONMENTAL AND STRESS FACTORS ------------------------------------ENVIRONMENT----------------STRESS---------|--DEVELOPMENT PHASE--|-TIME-|-------WEATHER-------| |---WATER--| |-NITROGEN-| DURA TEMP TEMP SOLAR PHOTOP PHOTO GROWTH PHOTO GROWTH TION MAX MIN RAD [day] SYNTH SYNTH days oC oC MJ/m2 hr -------------------------------------------------------------------------------Emergence -First Flower 40 33.04 22.20 19.34 13.74 .000 .004 .000 .273 First Flower-First Seed 32 33.33 21.71 19.55 13.03 .000 .000 .000 .006 First Seed - Phys. Mat. 40 31.95 19.39 16.82 11.98 .099 .179 .098 .022 Emergence - Phys. Mat. 112 32.73 21.06 18.50 12.91 .035 .066 .035 .107 (0.0 = Minimum Stress 1.0 = Maximum Stress)

SOYBEAN

YIELD :

2932 kg/ha

[DRY WEIGHT]

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

134

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

CHAPTER SIX . DISPLAYING RESULTS GENERAL FILE MANAGER After finishing one or more simulation runs, a user can display simulated results in various formats using the DSSAT v3 General File Manager. In Screen 1, the option following ÒSimulateÓ is ÒOutputs.Ó When this option is chosen, Screen 12 (shown below) is presented, which displays the General File Manager menu for handling the various simulation output files.

Version 1.0

General File Manager - MODEL OUTPUTS - Files in Directory: C:\DSSAT3\SOYBEAN L

FILE NAME

FILE HEADING

√ √ √ √ √ √

CARBON.OUT GROWTH.OUT NITROGEN.OUT OVERVIEW.OUT SUMMARY.OUT WATER.OUT

*CARBON BALANCE OUTPUT FILE *GROWTH ASPECTS OUTPUT FILE *NITROGEN BALANCE OUTPUT FILE *SIMULATION OVERVIEW FILE UFGA7801SB BRAGG, IRRIGATED & NON-IRRIGATED *WATER BALANCE OUTPUT FILE

F1 F2 F3 Esc

-

F4 - Search Help F5 - Sort Institute Listing F6 - Print Site Listing L - Include/Exclude In Sublist Quit

F7 F8 F9 F10

-

Colour OFF Edit Remake List Edit Config File

SCREEN 12.

In Screen 12, the simulation output files are listed. The OVERVIEW.OUT file was discussed in Chapter 5. The file, SUMMARY.OUT, contains a one line summary for each simulation and is mainly used for applications, such as the seasonal and sequence analysis programs discussed in Volumes 3-1 (Thornton et al. 1994 a) and 3-2 (Thornton et al. 1994 b), respectively, of this book. Files GROWTH.OUT, WATER.OUT, NITROGEN.OUT, and CARBON.OUT contain time-dependent

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v 3, Volume

135

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

variables as simulated by the crop models. Although these files can be edited, they are normally wider than 80 characters and fairly long, depending upon the number of simulations made by the user. The first 13 variables of each of the listed output files are identical for all crop models, with the first two variables being year-day of year and days after planting. Additional variables can be added as a function of each individual model. For more detailed information, see Volume 21 (Jones et al., 1994) of this book. One of the features of the General File Manager allows the installation of a userÕs editor. By selecting the Edit option (key < F8>) and positioning the highlight bar over the file name, this output file can be edited. An option for a printout of this output file can also be selected from the editor. The General File Manager includes other options, which are discussed in Volume 1-3 (Hunt et al. 1994) of this book. The crop models automatically overwrite existing output files. Thus, when a new crop model run is initiated, the old output files are erased and new output files are opened. To keep and save output files, a user can rename the genericallynamed model output files, or select an option under the Sensitivity Analysis section to store the output files, using a naming convention with Institute and Site code IDs similar to those used for the experiment input file.

G R A P H I C D I S P L AY DSSAT v3 contains a Graphics option, shown in Screen 1. When this option is selected, the graphics display program, Wingraf is run. See Part 3 of this Volume (Volume 2-3, Chan et al. 1994) for a description of this program. Screen 13 (on the following page) displays the first Wingraf screen. Wingraf allows the user to display the simulated data as a function of day of year or planting date. In addition, field-measured data are included in the graph, when available. A user can graphically display growth and development variables: (GROWTH.OUT), soil and plant water and weather variables (WATER.OUT), soil and plant nitrogen variables (NITROGEN.OUT), pest and disease variables (PEST.OUT) and carbon balance and photosynthesis variables (CARBON.OUT). By selecting the menu option ÒUser-Selected VariablesÓ displayed in Screen 13, a user can also design a new list of variables by combining variables from previously listed options (see Screens 14 and 15).

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

136

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

-

Select Graph

Options

Exit

Growth... Water... Nitrogen... Disease & Pests... Carbon... User-Selected Variables Summary Validation Summary Response...

F1 Help

Esc Escape

X-Var.:

Simulation:

SCREEN 13.

For our example, the ÒGrowthÓ option was selected in Screen 13, which produces a screen with a list of available variables for graphing (see Screen 14). Also in Screen 13, the ÒOptionsÓ menu item can be selected. From the ÒOptionsÓ submenu, a user can set the colors for graph plotting, such as graph background, item and line colors; change the label of the x-axis; choose type of x-y plotting; choose whether or not to have experimental and simulated data plotted; select the number of graph intervals; and the number of tics. More details about setting graph options can be found in Part 3 of this Volume (Volume 2-3, Chan et al. 1994).

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v 3, Volume

137

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

Options

Select Graph [ ]

Exit GROWTH

Variables [ ] Leaf number per stem [ ] Growth stage [ ] Leaf area index [X] Leaf dry weight (kg/ha) [X] Stem dry weight (kg/ha) [X] Grain dry weight (kg/ha) [X] Root dry weight (kg/ha) [X] Crop dry weight (kg/ha) [ ] Grain number (no/m2) [ ] Grain dry weight (mg/grain) [ ] Harvest index (grain/top) [ ] Pod dry weight (kg/ha) [ ] Pod number (no/m2) [ ] Photo water stress factor (0-1) [ ] Growth water stress factor (0-1)

Previous

Next

Run Numbers [X] Example

X Variable

Graph

Reset

Option

SCREEN 14.

In Screen 14 (above), a user can choose to have displayed up to 6 variable-run combinations. Press the NEXT button on this screen to present another screen (Screen 15, below) displaying additional variables available for graphing.

Select Graph [ ]

Options

Exit GROWTH

Variables [ ] Nitrogen stress factor (0-1) [ ] Leaf N concentration (%) [ ] Shelling % (seed wt/pod st*100 [ ] Pod harvest index (pod/top) [ ] Detached pod dry weight (kg/ha) [ ] Total pod dry weight (kg/ha) [ ] Specific leaf area Cm2/g) [ ] Canopy height (m) [ ] Canopy breadth (m;for 1 row) [ ] Nodule dry weight (kg/ha) [ ] Root depth (m) [ ] Root density, 0-5 cm (cm/cm3) [ ] Root density, 5-15 cm (cm/cm3) [ ] Root density, 15-30 cm (cm/cm3) [ ] Root density, 30-45 cm (cm/cm3)

Previous

F1 Help

Next

Esc Escape

X Variable

Run Numbers

Graph

X Var.: Time

Reset

Option

Simulation: Default

SCREEN 15.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

138

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

To select variables for display, click the mouse on a variable or hit the space bar. When all variables have been selected, use either the mouse or the key to select the ÒRun NumbersÓ option. The default X-Variable is Òday of year,Ó but a user can change this to Òdays after plantingÓ or to another variable with the X-VARIABLE button in Screen 16. The OPTION button in Screens 14 and 15 is only available once a graph has been plotted. Then it can be used to make necessary modifications to the current graph, such as changing the x, y coordinates, modifying the multiplier for each plot, changing the min/max values, turning the graph grid line ÒOnÓ or ÒOffÓ and printing the graph to a hard copy. Use the key or GRAPH button or the keys to display the graph.

10.0k

7.5k

5.0k

2.5k

0.0k Jul 12

Jun 5

( ( ( ( (

1.00) 1.00) 1.00) 1.00) 1.00)

LEAF WT. kg/ha STEM WT. kg/ha GRAIN WT. kg/ha ROOT WT. kg/ha BIOMASS kg/ha

Aug 18

-

Sep 25

Nov 1

Example Example Example Example Example

SCREEN 16.

Screen 16 shows an example graph with model predicted data depicted as lines and field-measured data as symbols. A detailed description of the Wingraf program can be found in Part 3 of this Volume (Volume 2-3, Chan et al. 1994).

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v 3, Volume

139

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

140

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

CHAPTER SEVEN . MANAGEMENT AND SENSITIVITY ANALYSIS OPTIONS So far only options to simulate either a field or hypothetical experiment have been discussed. In these two cases, the model uses the information provided in the experiment details file, FILEX (Table 4). A user can also interactively modify many of the input variables defined in the input files, including those in the experiment data file, weather file, soil file and genetics file. To do this, select Option 1, ÒSelect Sensitivity Analysis Options,Ó shown in Screen 6 (in Chapter 5). Screen 17, shown below, will be presented.

MANAGEMENT / SENSITIVITY ANALYSIS ================================= The questions which follow relate to the initial experiment and treatment you selected. These default values allow you to validate the simulation results. To evaluate alternative management strategies or make tactical or strategical decisions, you can modify or change the default values. If you choose not to change any of the default values, press the ENTER key in response to the questions Please press < ENTER > to continue

===>

SCREEN 17.

The user needs to keep in mind that any changes made in the inputs in the screen which follows this one (Screen 18) might cause the model to give different simulation results compared to those derived from field measured data.

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

141

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

MANAGEMENT / SENSITIVITY ANALYSIS OPTIONS ========================================= 0. RETURN TO THE MAIN MENU 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.

Simulation Timing ....... Crop .................... Cultivar ................ Weather ................. Soil .................... Initial Conditions ...... Planting ................ Harvest ................. Water and Irrigation .... Nitrogen ................ Phosphorus .............. Residue ................. Pest and Diseases ....... Crop Process Options .... Output Control .......... SELECTION ?

JUN 15 1978 SOYBEAN SBGRO930.SPE SBGRO930.CUL BRAGG MAT : 7 MATURITY GROUP 7 UFGA OBSERVED WMOD:N IBSB910015 AS REPORTED JUN 15 1978 ROW SP: 91. PLANTS/m2: 29.90 AT HARVEST MATURITY ACCORDING TO FIELD SCHEDULE NOT FERTILIZED N-FIX SIMULAT. N/A PEST & DISEASE INTERACTION NOT SIMULATED H20:Y NIT:Y N-FIX:Y PEST:N PHOTO:C WTM:M ET:R FREQ: 3 OVV:Y SUM:Y GROWTH:Y H20:Y NIT:Y PEST:N

[Default = 0] ===>

SCREEN 18.

Screen 18 shows the various categories of variables which can be modified.

S I M U L AT I O N T I M I N G The ÒSimulation Timing and ControlÓ menu (Screen 19 on the next page) allows the user to define when a simulation begins. In all cases, the start of simulation date and year (Options 1 and 2) has to be earlier than the planting date, since all model variables are initiated at the start of simulation date. During the period between start of simulation and the planting date only the soil water and nitrogen balances are simulated. Option 3, ÒEnd of Simulation Date,Ó allows the user to determine the last day of simulation, and although this normally should be set in the ÒHarvestÓ section, it could be set to Ò-99Ó in this menu. Option 4, ÒNumber of Years to be Simulated,Ó allows the user to specify how many years will be simulated. This is normally set to Ò1.Ó If, in the example screen shown, the ÒNumber of YearsÓ was set to Ò2,Ó the model would conduct two simulations, one for 1978, and one for 1979. The user needs to be sure that weather data are available for the years for which the simulations are to be run.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

142

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

SIMULATION TIMING AND CONTROL ============================= 0. R e t u r n t o M a i n M e n u 1. 2. 3. 4. 5.

Start of Simulation Date ...........] JUN 15 Year of Simulation .................] 1978 End of Simulation Date .............] -9 Number of Years to Be Simulated ....] 1 Initial Conditions .................] AS REPORTED

SELECTION (#) ? [ Default = 0 ] --->

SCREEN 19.

When Option 5, ÒInitial Conditions,Ó is selected, Screen 20 (below) is presented.

INITIAL SOIL CONDITIONS ========================== 0. R e t u r n t o P r e v i o u s M e n u 1. A s R e p o r t e d f r o m I n p u t F i l e s . . . . . . . . . . . . . . . . . . . . . 2. S i m u l a t e d O u t p u t C o n d i t i o n s f r o m P r e v i o u s R u n . . . .

CURRENT INITIAL SOIL CONDITIONS ===> AS REPORTED SELECTION (#) ? [ Default = 0 ] --->

SCREEN 20.

In Screen 20, a user can define whether the model initiates the variables at the start of each succeeding simulation (Option 1) or if the final conditions from a previous model run are to be used (Option 2). Selecting Option 2 in this screen is useful when simulating crop rotation studies.

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

143

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

CROP The ÒCrop Selection and ModificationÓ menu shown in Screen 21 (below) can currently be used only with the grain legume models.

CROP SELECTIONS AND MODIFICATION ================================ 0. R e t u r n t o P r e v i o u s M e n u 1. C r o p S e l e c t i o n . . . . . . . . . . . . . . . . . . . . [ S O Y B E A N 2. C r o p P a r a m e t e r F i l e . . . . . . . . . . . . . . . [ S B G R O 9 3 0 . S P E

SELECTION ? [ Default = 0 ] --->

SCREEN 21.

When Option 1, ÒCrop Selection,Ó is selected is Screen 21, the system checks which crop species files are present and then displays Screen 22 (below). When Option 2, ÒCrop Parameter File,Ó is selected in Screen 21, the user can choose a different crop species or parameter file as input. The default crop

IBSNAT 3.0 CROPS ================ 1) DRY BEANS 2) PEANUT 3) SOYBEAN SELECT CROP (#) ====> 1

SCREEN 22.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

144

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

species file is Ò??GRO940.SPE,Ó where ?? is either SB for soybean, PN for peanut, or BN for dry bean. In Screen 22, the user can choose to change the crop to one of those listed.

C U LT I VA R The ÒCultivar Selection and ModificationÓ menu shown in Screen 23 (below) allows the user to modify inputs related to the cultivar.

CULTIVAR SELECTION AND MODIFICATION =================================== 0. R e t u r n t o P r e v i o u s M e n u 1. 2. 3. 4.

Cultivar Selection ................[ IB0001 - BRAGG Cultivar Parameter ................[ SBGRO930.CUL Cultivar Parameter Modification ...| Ecotype Selection .................[ SB701 - MATURITY GROUP 7

SELECTION ? [ Default = 0 ] ---> 1

SCREEN 23.

When Option 1, ÒCultivar Selection,Ó is selected, Screen 24 (on following page) is presented. Option 2, ÒCultivar Parameter File,Ó allows the user to choose an alternate parameter file as input. When Option 3, ÒCultivar Parameter ModificationÓ is selected, Screen 25 (on following page) is presented. Option 4, ÒEcotype Selection,Ó is applicable only for the grain legume models, which use an ecotype file to represent the variables that are used to define a group of cultivars with the same growth and development characteristics. In Chapter 5, ÒNew Crop Model Features,Ó more information on the ecotype file is presented.

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

145

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

VARIETY SELECTION =================

NO. --1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15)

ENTRY -----990001 990002 990003 IB0003 990004 990005 990006 990007 990008 990009 990010 990011 990012 990013 UC0001

More.... 16) 17) 18) 19) 20) 21) 22)

press

IB0001 IB0043 IB0002 IB0060 UC0002 UC0003 IB0003

ECOTYPE GROUP ------SB0101 SB0201 SB0301 SB0301 SB0401 SB0501 SB0601 SB0701 SB0801 SB0901 SB1001 SB0001 SB0001 SB0001 SB0001

VARIETY -------------------M GROUP 1 M GROUP 2 M GROUP 3 WAYNE M GROUP 4 M GROUP 5 M GROUP 6 M GROUP 7 M GROUP 8 M GROUP 9 M GROUP 10 M GROUP 000 M GROUP 00 M GROUP 0 ALTONA


key

BRAGG CLARK COBB CUMBERLAND MAPLE ARROW MCCALL WAYNE

VARIETY SELECTED NEW SELECTION ?

MATURITY GROUP -------01 02 03 03 04 05 06 07 08 09 10 00 00 00 00

===> --->

SB0701 SB0502 SB0801 INDETE SB0001 SB0001 OB0301

07 05 08 DE 00 00 03

16

SCREEN 24.

In Screen 24, the user can choose an alternate cultivar from the one defined in FILEX. For this example, variety number 16, ÒBragg,Ó is the default cultivar. A user can select any variety or cultivar by entering one of the numbers from the first column. CULTIVAR SPECIFIC COEFFICIENTS ============================== CULTIVAR : BRAGG ------------------------------Please Check the User's Guide For Definitions, Units, and Ranges of Coefficients. 1) 3) 5) 7) 9) 11) 13)

CSDVAR: 12.330 PH2T5 : 19.500 FL-SD : 17.000 FL-LF : 15.000 SLAVR : 350.000 WTPSD : .200 SDPDV : 2.050

2) 4) 6) 8) 10) 12) 14)

PPSEN FL-SH SD-PM LFMAX XFRT SFDUR PODUR

: : : : : : :

.320 11.000 36.000 1.022 1.000 26.000 15.000

Please Enter Parameter # You Would Like To Modify [Default = 0] (Enter -1 to Save Values in File SBGRO930.CUL).

SCREEN 25.

In Screen 25, the user can modify all parameters which are defined in the cultivar file. This example screen displays the coefficients for the soybean cultivar ÒBragg.Ó

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

146

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥

W E AT H E R The ÒWeather Data Selection and ModificationÓ menu allows the user to select and modify input variables related to the weather conditions (Screen 26, below).

WEATHER DATA SELECTION AND MODIFICATION ======================================= 0.

Return

1. 2. 3. 4. 5.

Recorded/Simulated Data ............[ Weather Data Selection .............[ Weather Data Path ..................[ Enter Weather File Name Interactive.[ Weather Data Modification ..........[

to

SELECTION

Previous

?

[

Menu

Default

=

0

]

--->

OBSERVED DATA UFGA7801.WTH C:\DSSAT3\WEATHER\ UFGA7801.WTH N

1

SCREEN 26.

In Screen 26, Option 1, ÒRecorded/Simulated Data,Ó allows the user to define if either measured/observed weather data or generated weather data are to be used. In the case of generated data, the model generates these data internally through one of two weather generators that are part of the models, or by reading data from files which contain generated weather data (see Screen 27, on following page). When Option 2, ÒWeather Data Selection,Ó is selected, Screen 28 (on following page) is presented. Option 3, ÒWeather Data Path,Ó allows the user to define an alternate path where weather data files are located. Option 4, ÒEnter Weather File Name Interactive,Ó allows the user to enter an alternate file name. A user must be certain that this file exists; otherwise the model will not be able to simulate the selected management conditions. If a different weather year is selected, the system will modify all date-related inputs to the year selected. ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

147

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

Option 5, ÒWeather Data Modification,Ó allows the user to interactively modify the weather variables by either adding or subtracting a constant number, multiplying one or more weather variables by a constant number, or setting one or more variables as constant. If ÔYÕ is selected for this Option, Screen 29 (on following page) is presented.

WEATHER INPUT METHODS ===================== 0.

Return

1. 2. 3.

Field Observed Data .............................. Externally Simulated Data ........................ Internally Generated Data ........................

to

Previous

CURRENT WEATHER SELECTION (#) ?

Menu

INPUT CONDITIONS [ Default = 0 ]

===> --->

OBSERVED

DATA

SCREEN 27.

WEATHER LOCATIONS 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15)

CIAT, PALMIRA, COLOMBIA CIAT, PALMIRA, COLOMBIA SUPHEN_BURI, THAILAND CNPAF, GOIANIA, BRAZIL ICTA, QUEZADA, GUATEMALA IRRI, MUNOZ, PHILIPPINES IRRI, MUNOZ, PHILIPPINES IRRI, PILA, PHILIPPINES IRRI, PILA, PHILIPPINES IRRI, PILA, PHILIPPINES CASTANA, IOWA, USA ASHLAND, KANSAS, USA KAJONDI_FARM, BURUNDI GAINESVILLE, FLORIDA, USA GAINESVILLE, FLORIDA, USA

LAT.

LONG

ELEV

YEAR

DATA SET

3.500 3.500 14.500 -16.300 14.300 15.700 15.700 14.200 14.200 14.200 42.200 39.000 -3.300 29.600 29.600

-76.400 -76.400 100.100 -49.100 -90.000 120.900 120.900 121.300 121.300 121.300 -93.700 -97.000 30.000 -82.400 -82.400

-99. -99. -99. -99. -99. -99. 50. 50. 50. -99. -99. -99. 10. 10.

1986 1987 1985 1987 1989 1985 1986 1980 1985 1986 1979 1981 1986 1976 1978

CCPA8601.WTH CCPA8701.WTH DTSP8501.WTH EBGO8701.WTH IGQU8901.WTH IRMZ8501.WTH IRMZ8601.WTH IPPI8001.WTH IPPI8501.WTH IPPI8601.WTH IUCH7901.WTH KSAS8101.WTH UBKA8601.WTH UFGA7601.WTH UFGA7801.WTH

29.600 29.600 29.600 29.600 29.600 29.600 29.600 30.600

-82.400 -82.400 -82.400 -82.400 -82.400 -82.400 -82.400 -86.400

10. 10. 10. 10. 10. 10. 10. -99.

1979 1980 1981 1982 1984 1985 1986 1979

UFGA7901.WTH UFGA8001.WTH UFGA8101.WTH UFGA8201.WTH UFGA8401.WTH UFGA8501.WTH UFGA8601.WTH UFQU7901.WTH

More... PRESS ENTER KEY 16) 17) 18) 19) 20) 21) 22) 23)

GAINESVILLE, FLORIDA, GAINESVILLE, FLORIDA, GAINESVILLE, FLORIDA, GAINESVILLE, FLORIDA, GAINESVILLE, FLORIDA, GAINESVILLE, FLORIDA, GAINESVILLE, FLORIDA, QUINCY, FLORIDA, USA

USA USA USA USA USA USA USA

WEATHER DATA SELECTED ===> ALTERNATE SELECTION ? --->

15

SCREEN 28.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

148

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

Screen 28 (on preceding page) allows the user to select an alternate weather file as input. The screen displays a listing of the weather data locations available for this exampleÕs disk path. For this example, weather data from Gainesville, Florida, collected during 1978 (UFGA7801.WTH) are used (i.e., the number Ò15Ó was selected in Screen 28 and is presented next to Option 2 in Screen 26).

SELECT/REVISE WEATHER VARIABLES: ================================ 0) 1) 2) 3) 4) 5) 6) 7) 8)

OFFSET RETURN Photoperiod (Day length) .00 Solar Radiation .00 Maximum Temperature .00 Minimum Temperature .00 Rainfall .00 Carbon Dioxide .00 Humidity (dew point) .00 Wind speed .00

MULT. VALUE 1.00 1.00 1.00 1.00 1.00 1.00 3 3 0 . 0 0 1.00 1.00

Relative adjustments of CO2 from a base value of

330. ppm.

PFD and Solar Radiation automatically changed together.

CHOICE ? < Default = 0 > ===>

SCREEN 29.

Screen 29 shows an overview of the weather variables which can be modified. In this example screen, the CO2 concentration is set to 330 ppm, while none of the other variables are modified. When one of the variables is selected by its corresponding option number, Screen 30 (on following page) is presented.

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

149

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

Select modification option, then enter amount: 0) 1) 2) 3) 4)

NO CHANGE Additive Change Subtractive Change Multiplicative Change Constant Value

( ( ( ( (

ambient conditions ) 3.0 = 3 higher ) 3.0 = 3 lower ) 1.2 = 20% higher ) 100 = constant of 100 )

SCREEN 30.

Screen 30 allows the user to choose one of the modification options listed in order to revise or alter the weather variable selected in Screen 29 (on preceding page).

SOIL

The ÒSoil Profile Selection and ModificationÓ menu allows the user to modify input variables related to the soil profile characteristics (Screen 31, below).

SOIL PROFILE SELECTION AND MODIFICATION ======================================= 0. R e t u r n t o M a i n M e n u 1. 2. 3. 4. 5. 6.

Soil Soil Soil Soil Soil Soil

Profile Profile Profile Profile Profile Surface

Selection ............[ IBSB910015 - FSH File .................[ SOIL.SOL Path .................[ C:\DSSAT3\SOIL\ Layer Thickness ...... Parameters ........... Parameters ...........

SELECTION ? [ Default = 0 ] ---> 1

SCREEN 31.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

150

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

In Screen 31, Option 1, ÒSoil Profile Selection,Ó allows the user to select an alternate soil profile as input. If this option is selected, Screen 32 (on following page) is presented. As can be seen in Screen 31, pedon number IBSB910015 ÒMillhopper Fine SandÓ was selected from Screen 32. When an alternate soil profile is selected as input from that first presented in Screen 31, the user will be requested to redefine the initial soil conditions, because for many soils the initial conditions are soil profile specific (see Screen 34). Option 2, ÒSoil Profile FileÓ in Screen 31, allows the user to define an institute soil file as an alternate soil input file. For this example experiment, the institute is the University of Florida. Therefore the alternate soil file would be UF.SOL. Option 3, ÒSoil Profile Path,Ó allows the user to define an alternate directory path for the soil file. Option 4, ÒSoil Profile Layer Thickness,Ó allows the user to modify the thickness of each soil profile layer. If this option is selected, Screen 33 (on following page) is presented. Option 5, ÒSoil Profile Parameters,Ó allows the user to modify the input values for the most important soil profile parameters. These include the drained upper limit, lower limit of plant extractable soil water, saturated water content, initial soil water content, bulk density, pH, soil organic carbon content, and rooting characteristics. If this option is selected, Screen 34 is presented. Option 6, ÒSoil Surface Parameters,Ó allows the user to modify the input values for the most important soil surface characteristics. These include soil albedo, first stage evaporation limit, runoff curve number, drainage rate, nitrogen mineralization factor, and growth reduction or fertility factor, which is only implemented in the grain legume models. If this option is selected, Screen 35 is presented.

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

151

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

REF NO. TAXONOMY NAME 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14)

SOILS IN THE DATA BASE ====================== SOIL NUMBER

Millhopper Fine Sand Orangeburg Sandy Loam Ida Silt Loam Millhopper Fine Sand Millhopper Fine Sand Haynie M3 San-Fernando Millhopper Fine Sand UNKNOWN ANDAQUEPTIC HAPLAQUOLL VERTIC TROPAQUEPT

SELECTED SOIL TYPE ===> NEW SELECTION ? --->

IBSB910015 IBSB910017 IBSB910026 IBPN910015 IBMZ910014 IBWH910018 IBBN910030 IBBN910038 IBBN910015 GAPN930001 IBRI910001 IBRI910002 IBRI910063 IBRI910071 1

SCREEN 32.

Screen 32 shows a listing of some of the soil profiles available. More information on how to modify the initial conditions is described in the next section, ÒInitial Conditions,Ó in this Chapter.

LAYER DEPTH MODIFICATION ======================== 0)

RETURN TO THE MAIN MENU

1) 2) 3) 4) 5) 6) 7) 8) 9)

.00 5.00 15.00 30.00 45.00 60.00 90.00 120.00 150.00

5.00........] 15.00........] 30.00........] 45.00........] 60.00........] 90.00........] - 120.00........] - 150.00........] - 180.00........]

5.00 10.00 15.00 15.00 15.00 30.00 30.00 30.00 30.00

cm cm cm cm cm cm cm cm cm

SELECTION ? [ Default = 0 ] ===>

SCREEN 33.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

152

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

SOIL PROFILE MODIFICATION ========================= 0. R e t u r n t o M a i n M e n u 1. 2. 3. 4. 5. 6. 7. 8.

Drained Upper Limit .............. Lower Limit ...................... Saturated Water Content .......... Initial Soil Water Content ....... Bulk Density ..................... pH ............................... Soil Organic Carbon .............. Rooting Characteristics ..........

SELECTION ? [ Default = 0 ] ===>

SCREEN 34.

SOIL SURFACE PARAMETERS ======================= 0. R e t u r n t o P r e v i o u s M e n u 1. 2. 3. 4. 5. 6.

Soil Albedo ...................] Evaporation Limit .............] Runoff Curve Number ...........] Drainage Rate .................] Mineralization Factor .........] Growth Reduction/Fertility Fac.]

.180 5.000 66.000 .500 1.000 .840

SELECTION (#) ? [ Default = 0 ] --->

SCREEN 35.

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

153

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

INITIAL CONDITIONS The ÒInitial Conditions at Start of SimulationÓ menu allows the user to modify the input variables used to initialize the crop model when a simulation is started (Screen 36, below).

INITIAL CONDITIONS AT START OF SIMULATION ========================================= 0. R e t u r n t o P r e v i o u s M e n u 1. 2. 3. 4. 5. 6. 7.

Initial Soil Water Content ..........................0 Initial Soil N03 ....................................0 Initial Soil NH4 ....................................0 Growth Reduction Factor Due to Poor Soil Fertility ..] Root Weight from Previous Crop ......................] Nodule Weight from Previous Crop ....................] Previous Crop .......................................]

.840 100.00 .00 SB

SELECTION ? [ Default = 0 ] --->

SCREEN 36.

In Screen 36, Options 1, 2 and 3, ÒInitial Soil Water Content,Ó ÒInitial Soil NO3Ó and ÒInitial Soil NH4,Ó respectively, allow the user to modify these variables for each layer. If Option 1 is selected, Screen 37 (on following page) is presented. Option 4, ÒGrowth Reduction Factor Due to Poor Soil Fertility,Ó is used only in the grain legume models to adjust biomass growth for conditions which are currently not included in the crop process simulations. Options 5, 6 and 7, ÒRoot Weight from Previous Crop,Ó ÒNodule Weight from Previous CropÓ and ÒPrevious Crop,Ó respectively, relate to crop residues remaining from previous crop and which are present at planting of the current crop. This information is needed when the soil nitrogen balance is simulated.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

154

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

INITIAL SOIL WATER CONTENT ========================== 0) R E T U R N T O T H E M A I N M E N U 0. 1) 5. 2) 3) 15. 4) 30. 5) 45. 6) 60. 7) 90. 8) 120. 9) 150. -

5. 15. 30. 45. 60. 90. 120. 150. 180.

cm cm cm cm cm cm cm cm cm

........] ........] ........] ........] ........] ........] ........] ........] ........]

.0860 .0860 .0860 .0860 .0860 .0760 .0760 .1300 .2580

cm3/cm3 cm3/cm3 cm3/cm3 cm3/cm3 cm3/cm3 cm3/cm3 cm3/cm3 cm3/cm3 cm3/cm3

SELECTION ? [ Default = 0 ] --->

SCREEN 37.

Screen 37 displays the variables which can be changed if Option 1, ÒInitial Soil Water ContentÓ in Screen 36, is selected.

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

155

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

PLANTING

The ÒPlanting Timing and ControlÓ menu allows the user to define the conditions at planting (Screen 38, below). PLANTING TIMING AND CONTROL =========================== 0. R e t u r n t o M a i n M e n u 1. P l a n t i n g D a t e . . . . . . . . . . . . . . . . . . . . . . ] 2. Y e a r o f P l a n t i n g . . . . . . . . . . . . . . . . . . . ] 3. P l a n t P o p u l a t i o n . . . . . . . . . . . . . . . . . . . ] 4. R o w S p a c i n g . . . . . . . . . . . . . . . . . . . . . . . . ] 5. R o w D i r e c t i o n . . . . . . . . . . . . . . . . . . . . . . ] 6. P l a n t i n g D e p t h . . . . . . . . . . . . . . . . . . . . . ] 7. P l a n t i n g M a t e r i a l D r y W e i g h t . . . . . . . ] 8. P l a n t i n g M e t h o d . . . . . . . . . . . . . . . . . . . . ] 9. P l a n t i n g M a n a g e m e n t . . . . . . . . . . . . . . . . ] 10. A u t o m a t i c P l a n t i n g O p t i o n s . . . . . . . . . |

JUN 15 1978 29.900 91.000 .000 4.000 -99.000 SEED ON REPORTED DATE

SELECTION (#) ? [ Default = 0 ] --->

SCREEN 38.

In Screen 38, Options 1 and 2, ÒPlanting DateÓ and ÒPlanting Year,Ó respectively, allow the user to modify the planting date and year. Options 3 and 4, ÒPlant PopulationÓ and ÒRow Spacing,Ó respectively, allow the user to define plant density, row spacing and plant spacing. Option 5, ÒRow Direction,Ó is used only in the grain legume models to define light interception for the simulated leaf level photosynthesis processes. Option 6, ÒPlanting Depth,Ó affects germination and emergence. Option 7, ÒPlanting Material Dry Weight,Ó allows the user to define the initial weight of the root crops at planting. Option 8, ÒPlanting Method,Ó allows the user to define planting method, strategy (e.g., seed, transplant, etc.)

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

156

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

Option 9, ÒPlanting Management,Ó allows the user to define when planting occurs; either at the specified date in Option 1 or 2 or through an automatic planting routine (Option 10). Option 10, ÒAutomatic Planting Options,Ó allows the user to define a window for soil water and temperature which determine when soil conditions in the top of the profile are optimum for germination (see Screen 39, below). Delineation of soil water and temperature, within which planting can occur, can also be specified in Screen 39. It is important that the earliest planting date, defined in Screen 39, be a date after the start of simulation date, as defined in Screen 19. AUTOMATIC PLANTING MANAGEMENT ============================= 0.

Return to Previous Menu

1. E a r l i e s t P l a n t i n g D a t e . . . . . . . . . . . . . . . . . . . . . . ] 2. L a t e s t P l a n t i n g D a t e . . . . . . . . . . . . . . . . . . . . . . . . ] 3. L o w e r m o s t S o i l W a t e r C o n t e n t . . . . . . . . . . . . . . . . ] 4. U p p e r m o s t S o i l W a t e r C o n t e n t . . . . . . . . . . . . . . . . ] 5. M a n a g e m e n t D e p t h F o r S o i l W a t e r . . . . . . . . . . . . . ] 6. M a x i m u m S o i l T e m p e r a t u r e ( T o p 1 0 c m A v g ) . ( ° C ) ] 7. M i n i m u m S o i l T e m p e r a t u r e ( T o p 1 0 c m A v g ) . ( ° C ) ]

JUN 4 1978 JUL 19 1978 40. 100. 30. 40. 10.

START OF SIMULATION DATE IS AFTER THE START OF THE AUTOMATIC PLANTING WINDOW. PLEASE MODIFY PLANTING DATE OR SIMULATION WILL TERMINATE !

SELECTION (#) ? [ Default = 0 ] --->

SCREEN 39.

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

157

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

HARVEST The ÒHarvest Timing and ControlÓ menu allows the user to define the conditions for crop harvesting. The default for harvest is when the crop reaches harvest maturity, as shown in Screen 40 (below).

HARVEST TIMING AND CONTROL ========================== 0. Return to Main Menu 1. 2. 3. 4. 5. 6. 7. 8.

Harvest Management .................] Harvest Date .......................] Harvest Days after Planting ........] Harvest Stage ......................] Harvest Component ..................] Harvest Size Group .................] Harvest Percentage .................] Automatic Harvest Options ..........|

AT HARVEST MATURITY -9 -9 -9 Harvest 100.

SELECTION (#) ? [ Default = 0 ] --->

SCREEN 40.

In Screen 40, Option 1, ÒHarvest Management,Ó allows the user to define various management options. If this option is selected, Screen 41 (on following page) is presented. Option 2, ÒHarvest Date,Ó is active only when, in Screen 41, the user selects Option 2, ÒOn Reported Date(s).Ó Then, Screen 40 is presented again and the user can select Option 2 and enter the harvest date. Option 3, ÒHarvest Date After Planting,Ó is active only when, in Screen 41, the user selects Option 3, ÒOn Reported Days After Planting.Ó Then, Screen 40 is presented again and the user can select Option 3 and enter the number of days after planting for the harvest date. Option 4, ÒHarvest Stage,Ó allows the user to select the phenological or development stage at which to harvest the crop and terminate the simulation. Options 5, 6 and 7, ÒHarvest Component,Ó ÒHarvest Size GroupÓ and Harvest

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

158

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

Percentage,Ó respectively, presented in this screen, are in the process of being developed. An option for ÒMultiple HarvestsÓ is also under development. When Option 8, ÒAutomatic Harvest Options,Ó is selected, Screen 42 (on following page) is presented, which allows the user to select conditions for harvest.

HARVEST MANAGEMENT STRATEGY =========================== 0. Return to Previous Menu 1. 2. 3. 4. 5.

At Harvest Maturity ............................ On Reported Date(s) ............................ On Reported Days After Planting ................ At Reported Growth Stage(s) .................... Automatic When Conditions are Satisfactory ..... CURRENT HARVEST MANAGEMENT ===> AT HARVEST MATURITY SELECTION (#) ? [ Default = 0 ] --->

SCREEN 41.

Screen 41 allows the user to define various harvest management options. These include harvest at crop harvest maturity (Option 1 and the default for Option 1 in Screen 40); harvest on reported date (Option 2) or fixed day (Option 3); harvest at a particular developmental stage (Option 4); and an automatic harvest as a function of a set of crop and environmental conditions (Option 5).

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

159

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

AUTOMATIC PLANTING MANAGEMENT ============================= 0. R e t u r n t o P r e v i o u s M e n u 1. 2. 3. 4.

0 Earliest Harvest Date (Days after Maturity) .] Latest Harvest Date (Days of Year ) .......] DEC 31 1978 100. Product Harvested ........................(%)] 0. Residue Harvested ........................(%)]

SELECTION (#) ? [ Default = 0 ] --->

SCREEN 42.

Screen 42 shows the various conditions which can be set when the automatic harvest management option is selected in Screen 40.

W AT E R A N D I R R I G AT I O N The ÒWater and Irrigation Management and ModificationÓ menu allows the user to modify the various options and variables associated with the water balance simulation and irrigation applications (Screen 43, below).

WATER AND IRRIGATION MANAGEMENT AND MODIFICATION ================================================ 0. Return to Main Menu 1. 2. 3. 4. 5. 6. 7.

Water Balance Simulation ..........] Irrigation Management .............] Automatic Irrigation Control ......] Automatic Irrigation-Fixed Amount..] Irrigation Efficiency .............] Enter Irrigation Interactive ......| Water Output File .................]

Y ACCORDING TO FIELD SCHEDULE -9.000 -9.0 -9.000 mm .75 Y

SELECTION ? [ Default = 0 ] ===>

SCREEN 43.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

160

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

Option 1, ÒWater Balance SimulationÓ in Screen 43 (on preceding page), allows the user to turn the water balance simulation on or off. Option 2, ÒIrrigation Management,Ó allows the user to define the various irrigation management options, and when selected, Screen 44 (below) is presented. Options 3 and 4, ÒAutomatic Irrigation ControlÓ and ÒAutomatic Irrigation Fixed Amount,Ó respectively, allow the user to define the automatic irrigation controls explained earlier. These two options can be modified only when an automatic irrigation strategy has been selected under Option 2. Option 5, ÒIrrigation Efficiency,Ó allows the user to determine how much water is actually applied. For example, for furrow irrigation or sprinkler irrigation not all water measured in the supplying pipes is actually applied to the field or plot. Option 6, ÒEnter Irrigation Interactive,Ó can only be accessed when, under Option 2, ÒIrrigation Management,Ó the user selects ÒAccording to Field ScheduleÓ (see example in Screen 43). When Option 6 is selected, Screen 45 is presented. Option 7, ÒWater Output File,Ó allows the user to either switch the soil and plant water output file on or off.

IRRIGATION MANAGEMENT STRATEGY ============================== 0. Return to Main Menu 1. 2. 3. 4. 5.

Rainfed / Not Irrigated ........................ Irrigated According To Field Schedule .......... Automatic Irrigation / Refill Profile .......... Automatic Irrigation / Apply Fixed Amount ...... No Water Stress / No Water Balance Simulation ..

CURRENT IRRIGATION MANAGEMENT ---> ACCORDING TO FIELD SCHEDULE SELECTION (#) ? [ Default = 0 ] ===>

SCREEN 44.

In Screen 44, the user can select either rainfed with no supplemental irrigation (Option 1) or irrigate according to the field schedule (Option 2). In the latter case,

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

161

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

the irrigation data must be in FILEX. There are also two automatic irrigation options: Options 3 and 4. Option 3 selects to refill the selected profile depth to the drained upper limit or field capacity. Option 4 applies a fixed amount each time the system calls for an irrigation event. Both automatic irrigation events are controlled by a soil depth and a threshold value for extractable water, which can both be defined by the user. Option 5, ÒNo Water Stress/No Water Balance Simulation,Ó allows the user to choose not to simulate the soil water balance, which is the same as setting the water balance simulation to ÔNÕ in Screen 43. INTERACTIVE DATA ENTRY FOR IRRIGATION =====================================

#

Date

16 17 18 19

78272 78279 78283 78294

Amount (mm) 8.0 8.0 8.0 10.0

Irrigation Type Furrow, Furrow, Furrow, Furrow,

mm mm mm mm

(E)dit, (A)dd and event, (D)elete, (Q)uit (↵ = Done)

SCREEN 45.

Screen 45 is an example screen listing the options available for adding irrigation interactively. In this screen, a user can either edit, add, or delete an irrigation event.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

162

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥

NITROGEN The ÒNitrogen Management and ModificationÓ menu allows the user to modify variables and options associated with the soil nitrogen simulation (Screen 46, below). NITROGEN MANAGEMENT AND MODIFICATION ==================================== 0. R e t u r n t o M a i n M e n u 1. 2. 3. 4. 5. 6. 7.

Nitrogen Balance Simulation .......] N-Fertilizer Management ...........] Automatic Fertilizer Management ...] Enter N-Fertilizer Interactive ....| Nitrogen Fixation .................] Nitrogen Fixation Characteristics..| Nitrogen Output File ..............]

Y NOT FERTILIZED N-FIX SIMULAT. Y

SELECTION ? [ Default = 0 ] ===>

SCREEN 46.

Option 1, ÒNitrogen Balance Simulation,Ó allows the user to turn the soil nitrogen balance simulation on or off. Note that the water balance simulation must be set to ÔYÕ to simulate the soil nitrogen balance. Option 2, ÒN-Fertilizer Management,Ó allows the user to define the various nitrogen fertilizer management options. When this option is selected, Screen 47 (on following page) is presented. Option 3 in Screen 48, ÒAutomatic Fertilizer Management,Ó can only be accessed if Option 3, ÒAutomatic N-Fertilizer ApplicationÓ in Screen 47, is selected. When Option 3 in Screen 47 is selected, Screen 48 is presented. The user makes his selection(s) in Screen 48 and a ÔYÕ is placed next to Option 3 in Screen 46. Option 4, ÒEnter N-Fertilizer Interactive,Ó can only be accessed if Option 2, ÒApply N-Fertilizer According to Field ScheduleÓ in Screen 47, is selected. The screen which defines interactive N-fertilizer applications is not shown, but is similar to the screen for irrigation management (Screen 45, on preceding page).

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

163

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

Options 5 and 6, ÒNitrogen FixationÓ and ÒNitrogen Fixation Characteristics,Ó, respectively, are only applicable for the grain legume models. When Option 5 is selected, Screen 49 is presented. When Option 6 is selected, Screen 50 is presented. Option 7, ÒNitrogen Output File,Ó allows the user to either switch the soil and plant nitrogen output file on or off. NITROGEN FERTILIZER MANAGEMENT STRATEGY ======================================= 0. R e t u r n t o M a i n M e n u 1. 2. 3. 4.

Not Fertilized ................................... Apply N-Fertilizer According to Field Schedule ... Automatic N-Fertilizer Application ............... No Nitrogen Stress / No N-Balance Simulation .....

CURRENT IRRIGATION MANAGEMENT ---> NOT FERTILIZED SELECTION (#) ? [ Default = 0 ] ===>

SCREEN 47.

In Screen 47 (above), the user can select Option 1, ÒNot Fertilized,Ó with no supplemental nitrogen fertilizer applied, or Option 2, ÒFertilize According to the Field Schedule.Ó In the latter case, the nitrogen fertilizer data must be in FILEX. Please note that Option 4 in Screen 46, ÒEnter N-Fertilizer InteractiveÓ can only be accessed if Option 2 in Screen 47 is selected. (See Option 4 for screen 46.) Option 3 allows ÒAutomatic Nitrogen Fertilizer ApplicationÓ as a function of pre-set conditions. Please note that Option 3 in screen 46, ÒAutomatic Fertilizer Management,Ó can only be accessed if Option 3 in this screen is selected. (See Option 3 for Screen 46.) When Option 3 in Screen 46 is selected, Screen 48 (on following page) is presented. Option 4 in Screen 47 allows the user to choose not to simulate the soil nitrogen balance, which is the same as setting Option 1 to ÔNÕ in Screen 46.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

164

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

AUTOMATIC NITROGEN FERTILIZER APPLICATION ========================================= 0. R e t u r n t o P r e v i o u s M e n u 1. 2. 3. 4.

Threshold - Nitrogen Stree Factor ........(%)] 50.000 Amount of N-Fertilizer Per Application .kg/ha] 25.000 Application Depth .......................(cm)] 30.000 Material Code ............................(#)] Ammonium nitrate

SELECTION (#) ? [ Default = 0 ] --->

SCREEN 48.

Screen 48 shows the various threshold levels which can be set for automatic nitrogen fertilizer applications. In this screen, the threshold value (Option 1) uses a nitrogen factor expressed on a relative basis between 0 and 100 percent, where Ò0Ó means that the plants are under complete nitrogen stress and Ò100Ó means that the plants are under no nitrogen stress. Options 2, 3 and 4 allow the user to define the amount of nitrogen fertilizer to be applied, the application depth, and the type of nitrogen fertilizer, respectively, when the crop model calls for a nitrogen fertilizer application, as selected under the threshold level of Option 1.

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

165

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

NITROGEN FIXATION STRATEGY ========================== 0. Return to Previous Menu 1. No Nitrogen Fixation Simulation .................. 2. Dynamic Nitrogen Fixation Simulation ............. 3. Unlimited Nitrogen Fixation Simulation ........... CURRENT NITROGEN FIXATION SELECTION ===> N-FIX SIMULAT. SELECTION (#) ? [ Default = 0 ] --->

SCREEN 49.

Screen 49 (above) shows the nitrogen fixation variables available when Option 5 in Screen 46 is selected. Please note that Option 5 in Screen 46 is available only for the grain legume models (soybean, peanut and drybean). In Screen 49, Option 1, ÒNo Nitrogen Fixation Simulation,Ó allows the user to simulate a complete soil and plant nitrogen balance. However, plants will not fix nitrogen, which is similar to non-nodulating cultivars. Option 2, ÒDynamic Nitrogen Fixation Simulation,Ó allows the user to simulate both a dynamic nitrogen uptake and nitrogen fixation as a function of soil and weather conditions. Option 3, ÒUnlimited Nitrogen Fixation Simulation,Ó allows the user to simulate a dynamic nitrogen uptake and assumes that the remainder of the nitrogen required for growth is available via N fixation.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

166

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

NITROGEN FIXATION CHARACTERISTICS ================================= 0.

Return to Previous Menu

1. 2.

Rhizobia Effectiveness ........] Rhizobia Number (Relative .....]

1.000 1.000

SELECTION (#) ? [ Default = 0 ] --->

SCREEN 50.

Screen 50 shows the nitrogen fixation characteristics which can be modified when Option 6 in Screen 46 is selected. In Screen 50, Option 1, ÒRhizobia Effectiveness,Ó is a relative number between 0 and 1. An effectiveness of Ò1Ó means that the rhizobia are completely active with respect to nitrogen fixation. Option 2, ÒRhizobia Number,Ó is also a relative number (0 to 1) which allows the user to determine the initial amount of rhizobia present at the start of simulation.

PHOSPHORUS The ÒPhosphorus Management and ModificationÓ menu is under development and is not available for the current DSSAT v3 crop models.

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

167

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

RESIDUE The ÒCrop Residue Management at Start of SimulationÓ menu allows the user to modify variables related to crop residue at the start of simulation (Screen 51, below). CROP RESIDUE MANAGEMENT AT START OF SIMULATION ============================================== 0. Return to Main Menu 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.

Residue Application Date .............................] Residue Applied at Start of Simulation ...............] Residue Nitrogen Concentration .......................] Residue Phosphorus Concentration .....................] Residue Incorporation ................................] Residue Incorporation Depth ..........................] Residue Material Code ................................] Root Weight from Previous Crop .......................] Nodule Weight from Previous Crop .....................] Previous Crop ........................................]

78166 1000.0 .80 .00 100.00 15.0 IB001 100.00 .00 SB

kg/ha % % % cm kg/ha kg/ha

SELECTION (#) ? [ Default = 0 ] --->

SCREEN 51.

In Screen 51, Option 1, ÒResidue Application Date,Ó uses the same date as the start of simulation date. Options 2, 3, 4, 5 and 6 allow the user to define, respectively, the amount of residue applied, its nitrogen and phosphorus concentration, the amount of residue incorporated into the soil, and the incorporation depth. Options 8 and 9, ÒRoot Weight from Previous CropÓ and ÒNodule Weight from Previous Crop,Ó respectively, allows the user to enter these values. Please note that the program assumes that all below ground material from a previous crop remains in the soil. Option 10 allows the user to define the crop grown previously (e.g., the crop grown before the current crop).

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

168

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

PEST AND DISEASE The ÒPest and Disease Selection and ModificationÓ menu is currently available only in the grain legume models (Screen 52, below).

PEST AND DISEASE SELECTION AND MODIFICATION =========================================== 0. R e t u r n t o M a i n M e n u 1. P e s t & D i s e a s e S i m u l a t i o n . . . . . . . . . ] N 2. E n t e r P e s t P o p u l a t i o n o r D a m a g e . . . ] 3. P e s t O u t p u t F i l e . . . . . . . . . . . . . . . . . . ] N

SELECTION ? [ Default = 0 ] ===>

SCREEN 52.

In Screen 52, Option 1, ÒPest & Disease Simulation,Ó allows the user to turn the pest and disease simulation on or off. Option 2, ÒEnter Pest Population or Damage,Ó is not currently available. Information on how to manually edit or create a pest population or crop damage can be found in Appendix C herein. Option 3, ÒPest Output File,Ó allows the user to switch the pest output file on or off.

¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

169

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models Models • Crop Models • Crop Models •

CROP PROCESS OPTIONS The ÒSimulation Control and ModificationÓ menu allows the user to control various internal process simulations of the models (Screen 53, below).

SIMULATION CONTROL AND MODIFICATION =================================== 0. R e t u r n t o M a i n M e n u 1. 2. 3. 4. 5. 6. 7. 8. 9.

Water Balance Simulation .................] Nitrogen Balance Simulation ..............] Nitrogen Fixation Simulation .............] Phosphorus Balance Simulation ............] Pest and Disease Interaction Simulation ..] Weather Input Method .....................] Initial Conditions .......................] Photosynthesis Simulation Method .........] Evaporation Simulation Method ............]

Y Y N-FIX SIMULAT. N Y OBSERVED DATA AS REPORTED CANOPY PHOT PRIESTLEY-TAYLOR

SELECTION ? [ Default = 0 ] ===>

SCREEN 53.

In Screen 53, Options 1, 2, 3, 4, 5, 6 and 7 can be modified in their respective menus. For example, the options for the Water Balance simulation (Option 1) and Nitrogen Balance simulation (Option 2), can be found in the ÒWater and IrrigationÓ and ÒNitrogenÓ sections, respectively, of this Chapter. Please note that Options 3, 5 and 8 are crop model or species specific.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V • DSSAT v3, Volume 2 • DSS

170

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

OUTPUT CONTROL The ÒOutput File Options and ControlsÓ menu allows the user to switch each output file (Options 2-9 in Screen 54, below) on or off.

OUTPUT FILE OPTIONS AND CONTROLS ================================ 0. R e t u r n t o M a i n M e n u 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.

Video Output .................................. Overview Output File .......................... Summary Output File ........................... Growth Output File ............................ Carbon Balance Output File .................... Water Balance Output File ..................... Nitrogen Balance Output File .................. Mineral Nutrients Output File ................. Pest Output File .............................. Frequency of Simulation Output (in days)....... Save Output Files with Experiment Code ........ Write Output Files with Long Format ...........

I Y Y Y Y Y Y N Y 3 N Y

SELECTION ? [ Default = 0 ] ===>

SCREEN 54.

In Screen 54, Option 1, ÒVideo Output,Ó allows the user to control the model output to the computer screen or monitor. Only the ÒIÓ, ÒInteractive Option,Ó will actually display output on the computer screen. ÒIÓ is the default for Option 1. When a Ò1Ó is entered (that is, the key and then the key are pressed), indicating that NO video output is required, this menu screen will immediately go blank and all screen writes will be eliminated. If the user wishes to select this option (i.e., have no screen display), but also wishes to select any of the other options, it is recommended that the user first enter those options and then select Option 1. Otherwise, although other options in this screen can be selected after entering Ò1,Ó the user will not see the menu and will have to work from memory. Once a Ò1Ó is entered, press the key twice. A dialog box will be presented in which the user can enter a Òrun nameÓ for the simulation. Press the key again. Simulation will begin, but nothing will be seen on the screen during the simulation. When simulation is completed, a message will be displayed on the screen informing the user of this. ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

171

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

NOTE: If you select Option 1 and enter an Ò1,Ó but wish to see this menu screen again, simply press Ò1Ó again. However, enter the second Ò1Ó BEFORE pressing the key twice, because after that is done, this screen cannot be refreshed. Option 2, ÒOverview Output File,Ó allows the user to control the output file, OVERVIEW.OUT. Option 3, ÒSummary Output File,Ó allows the user to control the output file, SUMMARY.OUT. A ÔYÕ selection for this file will erase the file from the previous run and will create a new output file; an ÔAÕ selection for this file will append the outputs of the current simulation to the already existing SUMMARY.OUT file and no headers will be written. A ÔNÕ will cause this file not to be created. Option 4, ÒGrowth Output File,Ó allows the user to control the output file, GROWTH.OUT. Option 5, ÒCarbon Balance Output File,Ó allows the user to control the output file, CARBON.OUT. Option 6, ÒWater Balance Output File,Ó controls the output file, WATER.OUT. Option 7, ÒNitrogen Balance Output File,Ó allows the user to control the output file, NITROGEN.OUT. Option 8, ÒMineral Nutrients Output File,Ó is not yet operational and will be implemented later to control the output file, PHOSPHOR.OUT. Option 9, ÒPest Output File,Ó allows the user to control the output file, PEST.OUT. Please note that this option is available only in the grain legume models. Option 10, ÒFrequency of Simulation Output,Ó allows the user to control the output interval, in days, for those output files which contain time-series data, such as GROWTH.OUT, WATER.OUT, CARBON.OUT, NITROGEN.OUT, PHOSPHOR.OUT and PEST.OUT. Option 11, ÒSave Output Files with Experiment Code,Ó allows the user to save the files using the same file name as FILEX for that experiment, except for its last character, which must be a G, W, N, C, P or D, for growth, water, nitrogen, carbon, phosphorus, and pests and diseases, respectively. The default setting for Option 11 is ÔNÕ. Option 12, ÒWrite Output Files with Long Format,Ó writes the output file with additional variables besides the standard variables used for each model. Screens 14 and 15 in the ÒGraphic DisplayÓ section of Chapter 6 give an indication of some of the additional variables which are stored in file GROWTH.OUT if the long format is selected for the output files.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

172

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

CHAPTER EIGHT. PROBLEMS AND ERROR MESSAGES Many types of personal micro-computers are available and it has not been possible to test the DSSAT v3 simulation models on all possible systems, hardware configurations or operating systems. System requirements to run DSSAT v3 and its crop models can be found in Chapter 2 of Volume 1-1 (Tsuji et al. 1994) of this book. A listing of important error messages is given in Table 7. Some common problems which may occur: 1. One of the three required executable files, MDRIV940.EXE, MINPT940.EXE and one of the crop simulation modules, is missing. 2. The three required executable files are not located in the same directory. 3. The model is being run from a data directory rather than from the crop model data directory. 4. One of the input files is missing. Required files are : ¥ EXP.LST Ð use the file manager in DSSAT v3 to recreate this file; ¥ The experiment selected during the model run. Look for a file with an X extension, i.e., ????????.CRX, where ???????? includes the Institute code, Site code, year and experiment number and CR is the crop code, e.g., UFGA7801.SBX. The ????????.CRX should also be included in the EXP.LST file. This file can be created or edited with the XCreate program (see Volume 1-4, Imamura 1994, of this book) or added to the EXP.LST with the General File Manager (see Chapter 6 herein). ¥ The cultivar file. This file is normally located either in the crop data directory or in the genotype directory of DSSAT v3 (C:\DSSAT3\GENOTYPE). The file name has the CUL extension, using the file name convention ????????.CUL, where ???????? is the crop model name and version, e.g., SBGRO940.CUL. ¥ The ecotype file. This file is normally located either in the crop data directory or in the genotype directory of DSSAT v3 (C:\DSSAT3\GENOTYPE). The file name has the ECO extension, using the file name convention ????????.ECO, where ???????? is the crop model name and version e.g., SBGRO940.ECO. ¥ The crop species file. This file is normally located either in the crop data directory or the genotype directory of DSSAT v3 (C:\DSSAT3\GENOTYPE). The file name has the SPE extension, using the file naming convention ????????.SPE, where ???????? is the crop model name and version, e.g., SBGRO940.SPE. ¥ The soil file. This file is normally located either in the crop data directory or in the soil data directory of DSSAT v3 (C:\DSSAT3\SOIL). Look for a file with the SOL extension. The general soil file name used in the crop models is SOIL.SOL. DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

173

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

¥ The weather file. This file is normally located either in the crop data directo ry or in the weather data directory of DSSAT v3 (C:\DSSAT3\WEATHER). Look for a file with the WTH extension, using the file name convention ????????.WTH, where ???????? includes the institute code, site code, and year, e.g., UFGA7801.WTH. ¥ The crop species in the *CULTIVAR section of FILEX is wrong. Check the code under ÒCRÓ in the *CULTIVAR section. ¥ The cultivar specified in the *CULTIVAR section is wrong or not included in the genotype file of the model. Check the code under INGENO in the *CULTIVAR sec tion of FILEX. Also check the genotype file ???????.CUL. If thecultivar is currently not included in this file, use the genotype calculator program to add this cultivar to the cultivar list and to estimate the initial values for all genetic coefficients. ¥ The weather station specified in the *FIELDS section is wrong or the file is not included in either the model data directory or weather data directory. Check the code under WSTA in the *FIELDS section of FILEX. ¥ The soil profile identified in the *FIELDS section is wrong or the soil profile is not part of the soil file SOIL.SOL. Check the section under ID_SOIL in the *FIELDS section of FILEX. Required model input data are explained in detail in Volume 2-1 (Jones et al., 1994) of this book, and example files are included with the required variables highlighted for the various options available for simulation. The input section of the model includes detailed error checking routines. The most common error messages are listed in Table 7. These messages include the subroutine and the input file in which the error occurred, and in some cases also the line number of the input file. These messages also give you some information about the type of error which occurred. In many cases these errors can be corrected by editing FILEX using either the XCreate program (see Volume 1-4, Imamura 1994, of this book) or any other ASCII text editor. There might be cases where the model gives a runtime error. These errors could either be due to a problem with the input file, such as a Ò0Ó where the model expects a number > 0, or other problems. However, in some cases, these errors can be caused by a combination of inputs which we have been unable to test during model development. If this happens, please make sure that your error is reproducible; that is, you can recreate the same error and error message using the same combination of input conditions. Please carefully document the problem, error message, combination of inputs and input files, and model version number and contact one of the model developers, a listing of whom can be found in Appendix D.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

174

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

TABLE 7.

IMPORTANT ERROR

MESSAGES.

AUTFER 1 Error in Fertilizer Sensitivity Analysis Selection. Fix entry or batch file. AUTIRR 1 Error in Irrigation Sensitivity Analysis Selection. Fix entry or batch file. CROPGR 1 Incompatible input file format. CROPGR 2 Planting date is before start of simulation date. Please fix input file. MRUN 1 Specified weather data files not available. Please create files. IDWTH 1 Error in Weather Sensitivity Selection entry. Fix entry or batch file. IDWTH 2 End of File in Weather Sensitivity Selection entry. Fix entry or batch file. INPUT 1 Error in Selection entry. Fix entry or batch file. INPUT 2 Planting Date is Before Start of Simulation. Please Fix Input File. IPCROP 1 Error in Crop Parameter Input File. End of File Reached. IPECO 1 Error in Ecotype entry. Fix entry or batch file. IPECO 2 Error in Ecotype entry. Fix ecotype input file. IPECO 3 DEFAULT Ecotype not found. Fix ecotype input file. IPECO 21 Ecotype input section not found. Please correct file. IPENV 1 Incorrect format in environmental section. Check format. IPEXP 1 Treatment input section not found. Please add to input file. IPEXP 2 Error in Experiment Selection entry. Fix entry or batch file. IPEXP 3 Error in Treatment Selection entry. Fix entry or batch file. IPEXP 4 Simulation must begin on or before the planting date. Correct dates. IPEXP 10 Error in crop input. Correct input file.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

175

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

IPEXP 11 Error in cultivar input. Correct input file. IPEXP 20 You selected a crop which can not be simulated by this model. Please ReExecute. IPEXP 21 Experiment list input section not found. Please correct file. IPEXP 22 Incorrect weather method option selected. Please correct file. IPFERT 1 Fertilizer input section not found. Please add to input file. IPFERT 2 Error in fertilizer inputs. Check format. IPFERT 10 Error in date of fertilizer application input. Correct input file. IPFERT 11 Error in depth of fertilizer application input. Correct input file. IPFERT 12 Error in amount of N-fertilizer input. Correct input file. IPFERT 13 Error in amount of P-fertilizer input. Correct input file. IPFERT 14 Error in fertilizer code. Correct input file. IPFLD 1 Field input section not found. Please add to input file. IPFLD 2 Error in field inputs. Check format. IPFLD 10 Error in weather station input. Correct input file. IPFLD 11 Error in soil identification input. Correct input file. IPHAR 1 Harvest input section not found. Please add to input file. IPHAR 2 Error in harvest inputs. Check format. IPHAR 3 Harvest growth stage not found. Please add to input file. IPHAR 4 Reported harvest date not found. Please add to input file. IPHAR 5 Reported harvest date after planting not found. Please add to input file. IPHAR 10 Error in date of harvest input. Correct input file.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

176

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

IPHAR 11 Error in harvest input. Correct input file. IPHAR 12 Error in harvest stage code. Correct input file. IPIRR 1 Irrigation input section not found. Please add to input file. IPIRR 2 Error in irrigation inputs. Check format. IPIRR 10 Error in date of irrigation input. Correct input file. IPIRR 11 Error in amount of irrigation input. Correct input file. IPIRR 12 Error in irrigation code. Correct input file. IPPARM 21 Pest parameter input section not found. Please correct file. IPPLNT 1 Planting input section not found. Please add to input file. IPPLNT 2 Error in planting inputs. Check format. IPPLNT 10 Error in planting date input. Check format. IPPLNT 11 Error in plant population input. Check format. IPPLNT 12 Error in row spacing input. Check format. IPPLNT 13 Error in row orientation input. Check format. IPRES 1 Residue input section not found. Please add to input file. IPRES 2 Error in residue inputs. Check format. IPRES 10 Error in date of residue application input. Correct input file. IPRES 11 Error in amount of residue input. Correct input file. IPRES 12 Error in amount of residue N input. Correct input file. IPRES 13 Error in amount of residue P input. Correct input file. IPRES 14 Error in amount of residue K input. Correct input file.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

177

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

IPSLAN 1 Initial soil analysis section not found. Please add to input file. IPSLAN 2 Error in initial soil analysis inputs. Check format. IPSLAN 10 Error in initial bulk density inputs. Please check data. IPSLAN 11 Error in initial organic carbon inputs. Please check data. IPSLAN 12 Error in initial nitrogen inputs. Please check data. IPSLIN 1 Initial soil input section not found. Please add to input file. IPSLIN 2 Error in initial soil inputs. Check format. IPSLIN 10 Error in initial soil water inputs. Please check data. IPSLIN 11 Error in initial NH4 inputs. Please check data. IPSLIN 12 Error in initial NO3 inputs. Please check data. IPSLIN 13 Error in initial residue weight inputs. Please check data. IPSLIN 14 Error in initial residue nodule weight inputs. Please check data. IPSLIN 15 Error in inoculation efficiency data. Please check data. IPSLIN 16 Error in fixation efficiency data. Please check data. IPSIM 1 Simulation control section not found. Please add to input file. IPSIM 2 Incorrect number of lines in simulation control section. Check format. IPSIM 3 Impossible combination--for MEEVP=’Z’, MEPHO must be ‘L’. IPSOIL 1 Error in Soil Selection entry. Fix entry or batch file. IPSOIL 2 More than 19 layers in the soil profile. Correct input file. IPSOIL 3 Error in Soil Selection entry. Fix soil input file. IPSOIL 4 End of soil file. Please add missing information to input file.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

178

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

IPSOIL 5 Depth of second tier does not match the one of the first tier. Fix input file. IPSOIL 6 Number of layers in second tier does not match the number in the first tier. IPSOIL 21 Soil input section not found. Please correct file. IPVAR 1 Error in Cultivar entry. Fix entry or batch file. IPVAR 2 Error in Cultivar entry. Fix cultivar input file. IPVAR 21 Genetics input section not found. Please correct file. IPVAR 22 LFMAX is less than or equal 0. Please correct file. IPVAR 23 SLAVAR is less than or equal 0. Please correct file. IPVAR 24 XFRUIT is less than or equal 0. Please correct file. IPVAR 25 WTPSD is less than or equal 0. Please correct file. IPVAR 26 SDPDVR is less than or equal 0. Please correct file. IPVAR 27 SFDUR is less than or equal 0. Please correct file. IPVAR 28 PODUR is less than or equal 0. Please correct file. IPWTH 1 Simulation date must be AFTER first available weather day. Correct dates. IPWTH 2 Missing day in weather data file. IPWTH 3 Missing or negative data in weather data file. PLANT 1 Error in photosynthesis process option. Please correct input file. PATH 1 Code not found in profile file DSSATPRO.FLE. Please correct file. READA 1 Error in experiment data (averages) file. Could not find @TRNO header line. READA 2 Error in experiment data (averages) file. SEDLYR 1 Error in Soil Sensitivity Analysis Selection entry. Fix entry or batch file. DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

179

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

SEWTH 1 Error in Weather Sensitivity Analysis Selection. Fix entry or batch file. SWFIX 1 Error in Fertilizer Sensitivity Analysis Selection. Fix entry or batch file. SWINSC 1 Error in Initial Soil Sensitivity Analysis Selection. Fix entry or batch file. SWIRR 1 Error in Irrigation Sensitivity Analysis Selection. Fix entry or batch file. WEATHR 1 Weather method selected not available. Please fix input file. WTHMOD 1 Weather modification created negative data in minimum data set. Check changes. MISC -1 End-of-file encountered in input file. MISC 6100 Integer overflow in input file. Check format. MISC 6101 Invalid integer in input file. Check format. MISC 6103 Invalid real in input file. Check format. MISC 6205 A Edit descriptor expected for Character. Check format. MISC 6206 Invalid format in input file. Check format. MISC 6416 File not found. Create input file.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

180

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

CHAPTER NINE . NEW CROP MODEL FEATURES N I T R O G E N B A L A N C E A N D N I T R O G E N F I X AT I O N ( G R A I N L E G U M E M O D E L S O N LY ) The soil N-balance in DSSAT v3 CERES models is the same as the soil N-balance of the individual CERES models in DSSAT v2.1 (Godwin and Jones, 1991). CROPGRO now also has detailed soil and plant nitrogen balance components, which include simulation of nitrogen uptake, nitrogen fixation, and nitrogen mobilization. Hoogenboom et al. (1990) incorporated the CERES-Wheat soil-N balance into SOYGRO V5.42 and added a nitrogen fixation component. This version of SOYGRO, called SOYNIT, underwent testing with 14 different data sets from the NiFTAL Project (Hoogenboom et al. 1990). These components were incorporated into CROPGRO and therefore the soybean, peanut, and dry bean models are now sensitive to soil-N and N-fixing dynamics. Users can run the models without simulating the soil nitrogen balance, and in this case, nitrogen is assumed to be non-limiting as was the case in the individual grain legume models. Also, users can select the soil nitrogen balance without simulating nodule growth and nitrogen fixation. In this case, soil nitrogen is taken up first each day, and any remaining nitrogen demand in the plant is met by allocating sufficient carbon to fix the nitrogen without considering limitations in the nitrogen-fixing mechanisms. Usually, both the soil nitrogen-balance and dynamic nitrogen-fixation are turned on, so that plant carbohydrate status, soil temperature, aeration, and limiting nodule mass can limit nitrogen fixation and simulate non-nodulating legume lines, such as those used in many nitrogen fixation experiments.

C R O P R O TAT I O N S An option exists which allows users to select whether to reinitialize the soil conditions after each run or to use the ending conditions from one simulation run as inputs to subsequent simulation runs. This feature allows for crop rotations to be studied, with carryover effects in the soil currently limited to crop residue, soil nitrogen, soil carbon, and soil water as a function of soil depth. Future additions will include phosphorus, other soil properties, and perhaps pest organisms. The Sequence Analysis program of DSSAT v3, described in Volume 3-2 (Thornton et al. 1994 b) of this book, allows users to specify crop rotations and to analyze results over long-term simulations. DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

181

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

E VA P O T R A N S P I R AT I O N C A L C U L AT I O N S In the CERES and CROPGRO models, options exist for the Priestley-Taylor method (Priestley and Taylor, 1972) and the FAO-Penman method (Doorenbos and Pruitt 1975) for potential evapotranspiration calculation. The PriestleyTaylor method is the same as used in previous versions of the models and was described by Ritchie (1985). The use of the FAO-Penman method requires daily humidity and wind speed data, in addition to the minimum weather data set required previously (Penman, 1948). The DSSAT v3 weather file format includes columns for these data when they are available. However, when these additional inputs are not available or have not been measured, users should select the Priestley-Taylor method.

P H O T O S Y N T H E S I S C A L C U L AT I O N O P T I O N S ( G R A I N L E G U M E M O D E L S O N LY ) The CROPGRO model includes two options to compute daily canopy photosynthesis. The first option is based on a single calculation of daily light interception followed by a single calculation of daily canopy photosynthesis. The second option is based on hourly calculations of sunlit and shaded leaf light interception followed by hourly photosynthesis calculations. Using this option, the daily canopy calculation is based on a canopy light extinction coefficient, in contrast to table look-up values in the earlier GRO models. The same light response curve is still used in CROPGRO, but it was modified slightly. For the hourly calculations, the hedge-row photosynthesis model developed by Boote and Loomis (1991) was used, since it more accurately simulates the effects of row and plant spacing on light interception and growth, which is needed to simulate plant density studies. For the hedge-row model, relationships were needed to simulate height and width of canopies, and thus routines were added to crop species files relating to potential elongation of internodes to node position on the plants in order to compute canopy height and width growth.

CARBON DIOXIDE EFFECTS The CERES and CROPGRO models include the capability to simulate the effects of CO2 on photosynthesis and water use. Internally in the models the daily potential transpiration calculations are being modified by the CO2 concentration, based on the effects of CO2 on stomatal conductivity (Peart et al., 1989). For the CERES and CROPGRO models, when the canopy photosynthesis model is used, a multiplicative modification is made to daily canopy photosynthesis as

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

182

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

described by Curry et al. (1990). For the CROPGRO model, when the hedge-row photosynthesis model is selected, CO2 is used to modify the leaf assimilation rate in a more mechanistic way, with an adaptation of the Farquhar et al. model by Pickering et al. (1993).

C L I M AT E C H A N G E S T U D I E S The DSSAT v3 crop simulation models have the capability to modify daily weather data, read in from the weather file, as well as photoperiod (daylength). Each weather variable can be modified, by multiplying a constant times the input value and/or by adding a constant to it. This provides flexibility to change one or all weather variables, and includes the capability to set them to constant values similar to conditions as observed in growth chamber and other constant environment experiment studies. Users can specify the date that a given modification is to begin and can also define more than one entry if the experiment includes environment switching of any type. These options are included in a special environmental section of FILEX for any experiment and can also be changed interactively during any model run.

W E AT H E R G E N E R AT O R S The DSSAT v3 crop simulation models have built-in capabilities for simulating weather using either one of two weather generators. Coefficients for generating weather are stored in site-specific climate files, e.g. *.CLI, such as UFGA.CLI, where UFGA is the site of the weather station. One of the weather generators is SIMMETEO, as developed by Geng et al. (1986). SIMMETEO requires only monthly averages of solar radiation, maximum and minimum air temperatures, precipitation, and days with precipitation as inputs. SIMMETEO then computes coefficients and uses the WGEN weather generator to simulate daily data. The second weather generator is WGEN, as developed by Richardson (1985). WGEN requires more statistics as input than does SIMMETEO. Its monthly weather statistics can be computed from daily data for a number of years, preferably five or more complete historical weather years. The DSSAT v3 modelsÕ ability to simulate weather internally, using only monthly averages of variables, will greatly expand the application of these models to areas where the monthly data are all that will be available.

S P E C I E S , E C O T Y P E A N D C U LT I VA R I N P U T S The DSSAT v3 grain legume models have three files that quantify parameters for each grain legume crop. The earlier genetics file for each crop, e.g., GENETICS.SB9, used for soybean in SOYGRO V5.42 in DSSAT v2.1, was split into two files for DSSAT v3 and additional changes were made. One file is the CULtivar file; for example, SBGRO940.CUL. This file contains fewer genetic coefDSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

183

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

ficients for soybean than SOYGRO V5.42. A second file is the ECOtype file; for example, SBGRO940.ECO, which contains coefficients that are thought to change among GROUPS of cultivars, but not for every cultivar. Thus the number of coefficients that have to be estimated for a new cultivar was reduced to 15. Since the coefficients in this file have to estimated for each cultivar that is to be simulated, they are discussed in more detail in Appendix A of this Part. A third file of parameters is the SPEcies file, designated by SPE, for example SBGRO940.SPE. This file is equivalent to the CROPPARM file in the earlier GRO models. In the naming convention for the cultivar file, ecotype file, and species file, the first two characters correspond to a particular species, and the following six characters represent the model used and its version number. For instance, the file, SBGRO940.*, designates the Soybean species, ecotype, and cultivar input files used in the GRO model (CROPGRO) released in 1994. Both the generic CERES model and the CERES - Rice model use only the cultivar files and do not have either an ecotype file or a species file as input. The change in these models in DSSAT v3 from those of the older models is that the DSSAT v3 genetic files use the same file format as that of the new Input/Output file structures described in Volume 2-1 (Jones et.al 1994) of this book.

PEST EFFECTS (GRAIN

L E G U M E M O D E L S O N LY )

A generalized method for incorporating pest damage in the crop models was developed (Batchelor et al., 1993) for DSSAT v3. Twenty-one coupling points were identified in the CROPGRO model, and damage can be simulated by reducing various state and/or rate variables. Damage can also be induced by input or field-observed damage or for field-measured pest populations. Pest and pest damage coefficients are defined in a special pest input file (e.g., for soybean, SBGRO940.PST). These pest coefficients are defined through the coupling points in the crop model and the damage rates associated with a unit of pest input. Field-observed pest damage or pest densities are input into the time course observed data file (FILET), which may include plant and soil variables, as well as pest damage levels (for example, UFGA8101.SBT). This approach was taken in order to facilitate a common way of handling field data in DSSAT v3. Users can also input hypothetical values of pest levels or pest damage in the time course file (FILEA) for an experiment in order to study damage effects on crop growth and yield. A detailed description of the method for incorporating pest damage into the DSSAT v3 models can be found in Appendix B of this Part.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

184

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

CHAPTER TEN . TEMPORARY MODEL INPUT FILE In Figure 3 some of the crop simulation model interface options are shown. The model driver program distributed with DSSAT v3, i.e. MDRIV940.EXE, calls the model input module, i.e. MINPT940.EXE. The model input module reads the experiment details file FILEX and creates a temporary output file, called ÒIBSNAT30.INP.Ó The input module has the option to create a temporary output file, using different formats. In Figure 3 three options are shown. Filetype is ÒIÓ for the CEGER940.EXE, CRGRO940.EXE, RICER940.EXE and CSSIM940.EXE models. Filetype ÒXÓ is also used by the CSSIM940.EXE model and could be used by other crop models if installed in DSSAT v3. A user-defined filetype could also be used for a new crop simulation module to link it to DSSAT v3. However, the input module would have to be modified to add this particular filetype to the system. Filetype ÒXÓ is identical to the current Input/Output file format of FILEX, except that it includes only information for one treatment, rather than an entire experiment. Filetype ÒIÓ is similar to the current Input/Output file format of FILEX, FILEX (Experimental Details File)

IBSNAT30.INP (Temporary File Format '?')

MINPT940 (Model Input Module)

IBSNAT30.INP Temporary File Format 'X')

IBSNAT30.INP (Temporary File Format 'I')

MDRIV940

(DSSAT V3 Crop Model Driver)

GECER940 (Generic Ceres Module)

CRGRO940 (Grain Legume Module)

RICER940 (Rice Module)

CSGUM940 (Cassava Module)

????940 (Other Crop Module)

FIGURE 3. RELATIONSHIP BETWEEN THE TEMPORARY MODEL INPUT FILE AND THE VARIOUS CROP SIMULATION MODULES. DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

185

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

except that it contains additional information with respect to location and names of input files, and all headers, comment lines, and blank lines have been deleted. An example of a typical temporary file is shown in Table 8. This file was generated using the same experimental and treatment selections discussed earlier in Chapter 5, ÒRunning the Crop Model,Ó herein. The example FILEX for this experiment is shown in Table 4. All information shown in this file is required; if lines or headers are deleted the crop simulation models will not run. The section Ò*MODEL INPUT FILE includes the run mode, i.e. interactive etc., run number, experiment number, i.e. entry number in the experiment list file EXP.LST, treatment number, and number of treatments in the selected experiment. The section Ò*FILESÓ includes the name and path for respectively the crop simulation module, FILEX, FILEA, FILET, species file, ecotype file, cultivar file, pest file, soils file, weather file, and output files. The section Ò*SIMULATION CONTROLÓ is identical to the simulation control section of FILEX, except that the headers have been deleted. Note that it also includes the automatic management section. The section Ò*EXP.DETAILSÓ is identical to the experiment details section of FILEX, except for no header information. The section Ò*TREATMENTSÓ only shows information for the actual treatment which is being simulated, while all level information has been deleted. The sections Ò*CULTIVARSÓ, Ò*FIELDSÓ, Ò*INITIAL CONDITIONSÓ, Ò*PLANTING DETAILSÓ, Ò*IRRIGATIONÓ, Ò*FERTILIZERSÓ, Ò*RESIDUESÓ, Ò*ENVIRONMENTÓ and Ò*HARVESTÓ all only include the information for the actual treatment level which is simulated. The information for the other levels has been eliminated, and all headers have been deleted. If a particular section does not have any levels, such as Ò*HARVESTÓ shown in the example, the actual section header still needs to be included. The Ò*SOILÓ section includes the detailed soil profile description, including loca-

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

186

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥

tion, names, soil surface and soil layer information for the soil selected under the Ò*FIELDSÓ section. A blank line delineates the information for the first and second tier. The format is the same as the format of the data stored in the actual soil profile file, except for the headers. The Ò*CULTIVARÓ section includes all the values of the variables for the particular cultivar selected under the Ò*CULTIVARÓ section discussed earlier. The format is the same as the format of the data stored in the actual cultivar file, except for the headers. The user needs to be aware that the crop simulation modules do not include error checking procedures. If the user decides to modify the format of this temporary file, or creates his own temporary file through different procedures, we can not guarantee that the crop simulation module will work properly.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

187

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

TABLE 8. EXAMPLE OF A TEMPORARY CROP MODEL INPUT FILE, USING FILE FORMAT = “I” (“IBSNAT30.INP”).

*MODEL INPUT FILE I 1 2 1 2 *FILES MODEL CRGRO940.EXE FILEX UFGA7801.SBX FILEA UFGA7801.SBA FILET UFGA7801.SBT SPECIES SBGRO940.SPE C:\DSSAT3\GENOTYPE\ ECOTYPE SBGRO940.ECO C:\DSSAT3\GENOTYPE\ CULTIVAR SBGRO940.CUL C:\DSSAT3\GENOTYPE\ PESTS SBGRO940.PST C:\DSSAT3\PEST\ SOILS SOIL.SOL C:\DSSAT3\SOIL\ WEATHER UFGA7801.WTH C:\DSSAT3\WEATHER\ OUTPUT OVERVIEW *SIMULATION CONTROL 1 1 S 78166 2150 BRAGG, IRRIGATED & NON-IR Y Y Y N N N M M E R S C R R N R M N Y Y 3 Y Y Y Y N N Y !AUTOMATIC MANAGEM 78155 78200 40. 100. 30. 40. 10. 30. 50. 100. GS000 IR001 10.0 .750 30. 50. 25. FE001 GS000 100. 1 20. 0 78365 100. 0. *EXP.DETAILS 2UFGA7801 SB BRAGG, IRRIGATED & NON-IRRIGATED *TREATMENTS 11 0 0 IRRIGATED *CULTIVARS SB IB0001 BRAGG (7) *FIELDS UFGA0001 UFGA7801 -99 0. DR000 0. 0. 00000 FSA 180. IBSB910015 *INITIAL CONDITIONS SB 78166 100. 0. 1.00 1.00 1 5. .086 .6 1.5 15. .086 .6 1.5 30. .086 .6 1.5 45. .086 .6 1.5 60. .086 .6 1.5 90. .076 .6 .6 120. .076 .6 .5 150. .130 .6 .5 180. .258 .6 .5 *PLANTING DETAILS 78166 -99 29.9 29.9 S R 91. 0. 4.0 -99. -99. -99.0 -99.0

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

188

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥

*IRRIGATION .750 -99. -99. -99. -99 -99 .0 78181 IR001 13. 0 78230 IR001 13. 0 78235 IR001 13. 0 78237 IR001 13. 0 78240 IR001 11. 0 78242 IR001 11. 0 78244 IR001 11. 0 78246 IR001 11. 0 78250 IR001 11. 0 78253 IR001 11. 0 78256 IR001 8. 0 78259 IR001 8. 0 78262 IR001 8. 0 78265 IR001 8. 0 78269 IR001 7. 0 78272 IR001 8. 0 78279 IR001 7. 0 78283 IR001 8. 0 78294 IR001 10. 0 *FERTILIZERS *RESIDUES 78166 RE001 1000 .80 .00 .00 100. 15. *ENVIRONMENT *HARVEST *SOIL IBSB910015 SCS FSA 180. Millhopper Fine Sand Gainesville USA 29.630 -82.370 Loamy,silic,hyperth .18 5.0 .50 66. 1.00 .84 IB001 IB001 IB001 5. .023 .086 .230 1.000 7.4 1.36 .90 -99.0 15. .023 .086 .230 1.000 7.4 1.40 .69 -99.0 30. .023 .086 .230 .498 15.8 1.46 .28 -99.0 45. .023 .086 .230 .294 28.0 1.47 .20 -99.0 60. .023 .086 .230 .294 27.6 1.47 .20 -99.0 90. .021 .076 .230 .380 17.5 1.43 .09 -99.0 120. .020 .076 .230 .133 .3 1.48 .03 -99.0 150. .027 .130 .230 .062 .1 1.57 .03 -99.0 180. .070 .258 .360 .031 .0 1.79 .03 -99.0 5. .0 .0 15. .0 .0 30. .0 .0 45. .0 .0 60. .0 .0 90. .0 .0 120. .0 .0 150. .0 .0 180. .0 .0 *CULTIVAR IB0001 BRAGG (7)

.0 .0 .0 .0 .0 .0 .0 .0 .0

.0 .0 .0 .0 .0 .0 .0 .0 .0

.0 .0 .0 .0 .0 .0 .0 .0 .0

.0 .0 .0 .0 .0 .0 .0 .0 .0

.0 .0 .0 .0 .0 .0 .0 .0 .0

Gross. Paleudults ( 15) -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0

-99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0

.00 .00 .00 .00 .00 .00 .00 .00 .00

5.3 5.4 5.7 5.8 5.8 5.9 5.9 5.9 5.9

-99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0

-99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 -99.0 .0

.0 .0 .0 .0 .0 .0 .0 .0 .0

SB0701 12.33 .320 19.50 10.00 15.00 35.50 15.00 1.022 350.0 170.0 1.00 .180

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

189

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

190

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

REFERENCES Alargarswamy, G., and J. T. Ritchie. 1991. Phasic development in CERES-Sorghum model. p. 143-152. In: T. Hodges (Ed.). Predicting Crop Phenology. CRC Press, Boca Raton, FL. Batchelor, W. D., J. W. Jones, K. J. Boote, and H. O. Pinnschmidt. 1993. Extending the use of crop models to study pest damage. Transactions of the ASAE 36(2):551-558. Batchelor, W.D., R.W. McClendon, J.W. Jones and D.B. Adams. 1989. An expert simulation system for soybean insect pest management. Transactions of the ASAE 32(1):335342. Boote, K. J., J. W. Jones, G. Hoogenboom, G. G. Wilkerson, and S. S. S. Jagtap. 1989. PNUTGRO V1.02: Peanut crop growth simulation model. User’s Guide. Florida Agricultural Experiment Station Journal No. 8420. University of Florida, Gainesville, FL. 76 pp. Boote, K.J. and R. S. Loomis. 1991. The prediction of canopy assimilation. p. 109-140. In: K.J. Boote and R.S. Loomis (ed.) Modeling crop photosynthesis - from biochemistry to canopy. CSSA and ASA, Madison, WI. Chan H., P. W. Wilkens, G. Hoogenboom, J.W. Jones and D. C. Godwin. 1994. Graphing simulated and experiment data. In: Tsuji, G.Y., G. Uehara and S. Balas (eds). DSSAT v3. Vol. 2-3. University of Hawaii, Honolulu, HI. Curry, R. B., R. M. Peart, J. W. Jones, K. J. Boote, and L. H. Allen. 1990. Simulation as a tool for analyzing crop response to climate change. Transactions of the ASAE 33:981990. Doorenbos, J. and W.O. Pruitt. 1975. Irrigation and drainage paper #24. In: Guidelines for Predicting Crop Water Requirements. FAO, Rome. Geng, S., F. W. T. Penning de Vries, and I. Supit. 1986. A simple method for generating daily rainfall data. Agric. For. Meteorol. 36:363-376. Godwin, D. C., and C. A. Jones. 1991. Nitrogen dynamics in the soil-plant systems. Chapter 13. p. 289-321. In: J. Hanks and J. T. Ritchie (eds.). Modeling Soil and Plant Systems. ASA Monograph 31; American Society of Agronomy; Madison, WI. DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

191

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

Godwin, D. C., J. T. Ritchie, U. Singh and L. Hunt. 1989. A User’s Guide to CERES Wheat: V2.10. International Fertilizer Development Center; Muscle Shoals, AL. Godwin, D. C., P. K. Thornton, J. W. Jones, U. Singh, S. S. Jagtap, and J. T. Ritchie. 1990. Using IBSNAT’s DSSAT in strategy evaluation. p. 59-71. In: Proceedings of IBSNAT Symposium: Decision Support System for Agrotechnology Transfer. University of Hawaii; Honolulu, HI. Griffin, T. S., B. S. Johnson, and J. T. Ritchie. 1993. A simulation model for potato growth and development: SUBSTOR-Potato V2.0. Research Report Series 02. IBSNAT Project. Dept. Agronomy and Soil Sci.; College of Trop. Agr. and Human Resources; University of Hawaii; Honolulu, HI. Hansen, J.W., N.B. Pickering, J.W. Jones, C. Wells, H.V.K. Chan and D.C. Godwin. 1994. Managing and generating daily weather data. In: Tsuji, G.Y., G. Uehara and S. Balas (eds). DSSAT v3. Vol. 3-3. University of Hawaii, Honolulu, HI. (In Preparation) Hoogenboom, G., J. W. Jones, and K. J. Boote. 1990. Nitrogen fixation, uptake, and remobilization in legumes: A modeling approach. p. 138-186. In: Proceedings of IBSNAT Symposium: Decision Support System for Agrotechnology Transfer, Las Vegas, 18 October, 1989. Part II: Posters. Department of Agronomy and Soil Science, College of Tropical Agriculture and Human Resources, University of Hawaii, Honolulu, Hawaii. Hoogenboom, G. J. W. Jones, and K. J. Boote. 1992. Modeling growth, development and yield of grain legumes using SOYGRO, PNUTGRO, and BEANGRO : A Review. Trans. ASAE 35(6):2043-2056. Hoogenboom, G., J. W. White, J. W. Jones and K. J. Boote. 1991. BEANGRO V1.01: Dry bean crop growth simulation model. User’s Guide. Florida Agricultural Experiment Station Journal No. N-00379; University of Florida, Gainesville, Florida. 122 pp. Hoogenboom, G., J. W. White, J. W. Jones, K. J. Boote. 1994. BEANGRO, a process oriented dry bean model with a versatile user interface. Agronomy Journal 86(1):182-190. Hunt, L.A., J.W. Jones, P.K. Thornton, G. Hoogenboom, D.T. Imamura, G.Y. Tsuji and

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

192

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

U. Singh. 1994. Accessing data, models and application programs. In: Tsuji, G.Y., G. Uehara and S. Balas (eds.). DSSAT v3. Vol. 1-3. University of Hawaii, Honolulu, HI. Hunt, L. A., S. Pararajasingham, J. W. Jones, G. Hoogenboom, D. T. Imamura, and R. M. Ogoshi. 1993. GenCalc - Software to facilitate the use of crop models for analyzing field experiments. Agronomy Journal 85:1090-1094 Hunt, L. A., S. Pararajasingham, J. W. Jones, G. Hoogenboom, D. T. Imamura, and R. M. Ogoshi. 1994. Generating genetic coefficients. In: Tsuji, G.Y., G. Uehara and S. Balas (eds). DSSAT v3. Vol. 3-4. University of Hawaii, Honolulu, HI. Imamura, D.T. 1994. Creating management files to run crop models & document experiments. In: Tsuji, G.Y., G. Uehara and S. Balas (eds). DSSAT v3. Vol. 1-4. University of Hawaii, Honolulu, HI. International Benchmark Sites Network for Agrotechnology Transfer Project. 1989. Decision Support System for Agrotechnology Transfer Version 2.1 (DSSAT V2.1). Dept. Agronomy and Soil Sci.; College of Trop. Agr. and Human Resources; University of Hawaii; Honolulu, HI. International Benchmark Sites Network for Agrotechnology Transfer Project. 1990. Technical Report 5. Documentation for IBSNAT Crop Model Input and Output Files, Version 1.1: for the Decision Support System for Agrotechnology Transfer (DSSAT V2.1). Dept. Agronomy and Soil Sci.; College of Trop. Agr. and Human Resources; University of Hawaii; Honolulu, HI. Jones, J. W., K. J. Boote, G. Hoogenboom, S. S. Jagtap and G. G. Wilkerson. 1989. SOYGRO V5.42: Soybean crop growth simulation model. User’s Guide. Florida Agricultural Experiment Station Journal No. 8304; University of Florida; Gainesville, FL. 75 pp. Jones, J. W., K. J. Boote, S. S. Jagtap and J. W. Mishoe. 1991. Soybean development. Chapter 5. p. 71-90. In: J. Hanks and J. T. Ritchie (eds.). Modeling Soil and Plant Systems. ASA Monograph 31; American Society of Agronomy; Madison, WI. Jones, J.W., E. Dayan, L.H. Allen, H.van Keulen, and H. Challa. 1991. A dynamic tomato growth and yield model (TOMGRO). Transactions of the ASAE 34(2):663-

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

193

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

672. Jones, J.W., L.A. Hunt, G. Hoogenboom, D.C. Godwin, U. Singh, G.Y. Tsuji, N. Pickering, P.K. Thornton, W.T. Bowen, K.J. Boote and J.T. Ritchie. 1994. Input and output files. In: Tsuji, G.Y., G. Uehara and S. Balas (eds). DSSAT v3. Vol. 2-1. University of Hawaii, Honolulu, HI. Jones, J. W., S. S. Jagtap, G. Hoogenboom and G. Y. Tsuji. 1990. The structure and function of DSSAT. p. 1-14. In: Proceedings of IBSNAT Symposium: Decision Support System for Agrotechnology Transfer. University of Hawaii; Honolulu, HI. Matthews, R. B., and L. A. Hunt. 1994. GUMCAS: a model describing the growth of cassava (Manihot esculenta L. Crantz). Field Crops Research 36:69-84. Otter-Nacke, S., J. T. Ritchie, D. Godwin, and U. Singh. 1991. A User’s Guide to CERES Barley - V2.10. International Fertilizer Development Center; Muscle Shoals, AL. Peart, R. M., J. W. Jones, R. B. Curry, K. J. Boote and L. H. Allen. 1988. Final Report. Impact of climate change on crop yield in the Southeastern USA: A simulation study. Institute of Food and Agricultural Sciences; University of Florida; Gainesville, FL. Penman, H. L. 1948. Natural evaporation from open water, bare soil and grass. Proceeding of the Royal Society, London A 193:120-145. Pickering, N. B., J.W. Jones, K.J. Boote, G. Hoogenboom, L.H. Allen, Jr. and J.T. Baker. 1993. Modeling soybean growth under climate change conditions. ASAE Paper 93-4510. American Society of Agricultural Engineers, St. Joseph, MI. Pickering, N.B., J.W. Hansen, J.W. Jones, C. Wells, H.V.K. Chan and D.C. Godwin. 1994. WeatherMan: a utility for managing and generating daily weather data. Agronomy Journal 86(2):332-337. Prasad, H. K., U. Singh, and R. Goenaga. 1991. A simulation model for aroid growth and development. Agronomy Abstracts (1991):77. Priestley, C. H. B. and R. J. Taylor. 1972. On the assessment of surface heat flux and evaporation using large-scale parameters. Mon. Weather Rev. 100:81-92.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

194

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

Reid, J.C. and G.L. Greene. 1973. The soybean looper: pupal weight, development time, and consumption of soybean foliage. Florida Entomologist 56(3):203-106. Reid, J.C. 1975. Larval development and consumption of soybean foliage by velvetbean caterpillar., anticarsia genumatalis (Hubner) (Lipidotera:Nictuidue) in the laboratory. Ph.D. diss., Univ. of Florida, Gainesville, FL. Richardson, C. W. 1985. Weather simulation for crop management models. Transactions of the ASAE 28(5):1602-1606. Ritchie, J. T. 1985. A user-oriented model of the soil water balance in wheat. p. 293-305. In: E. Fry and T. K. Atkin (eds.). Wheat Growth and Modeling. Plenum Publishing Corporation; NATO-ASI Series. Ritchie, J. T., U. Singh, D. C. Godwin and L. Hunt. 1989. A User’s Guide to CERES Maize - V2.10. International Fertilizer Development Center; Muscle Shoals, AL. Ritchie, J. T., D. C. Godwin and U. Singh. 1990. Soil and weather inputs for the IBSNAT crop models. p. 31-45. In: Proceedings of IBSNAT Symposium: Decision Support System for Agrotechnology Transfer. University of Hawaii; Honolulu, HI. Singh, U., J. T. Ritchie, and D. C. Godwin. 1993. A User’s Guide to CERES Rice V2.10. International Fertilizer Development Center; Muscle Shoals, AL. Singh, U., J. T. Ritchie, and P. K. Thornton. 1991. CERES-CEREAL model for wheat, maize, sorghum, barley, and pearl millet. Agronomy Abstracts (1991):78. Szmedra, P.L., R.W. McClendon and M.E. Wetzstein. 1988. Risk efficiency of pest management strategies: a simulation case study. Transactions of the ASAE 31(6):1642-1648. Thornton, P.K., G. Hoogenboom, P.W. Wilkens and J.W. Jones. 1994a. Seasonal analysis. In: Tsuji, G.Y., G. Uehara and S. Balas (eds.). DSSAT v3. Vol. 3-1. University of Hawaii, Honolulu, Hawaii. Thornton, P.K., P.W. Wilkens, G. Hoogenboom and J.W. Jones. 1994b. Sequence analysis. In: Tsuji, G.Y., G. Uehara and S. Balas (eds.). DSSAT v3. Vol. 3-2. University of Hawaii, Honolulu, Hawaii.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

195

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

196

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

APPENDIX A . GENETIC COEFFICIENTS Information on differences among crop genotypes are input to the model through genotype coefficient files. These files include BACER940.CUL for barley, MZCER940.CUL for maize, MLCER940.CUL for millet, SGCER940.CUL for sorghum, WHCER940.CUL for wheat, BNGRO940.CUL for dry bean, PNGRO940.CUL for peanut, SBGRO940.CUL for soybean, RICER940.CUL for rice, and CSSIM940.CUL for cassava. The coefficients stored in these files allow a single crop growth model to predict differences in development, growth and yield among cultivars when planted in the same environment. These genetic coefficients can be divided into those that relate to vegetative and reproductive development, to vegetative growth, and to reproductive growth. DSSAT v3 contains a program called Generating Genetic Coeffiecients, or GenCalc (see Hunt et al., 1993; and Volume 3-4, Hunt et al., 1994, of this book), which can be used to estimate the genetic coefficients for each species and new (or old) cultivars. The model user is therefore referred to this document for further detail about estimating these coefficients. Here, only the coefficients required for each species are defined, and an example for each species is given. Cultivar coefficients available for each species in DSSAT v3 are listed in this appendix.

CERES-BARLEY Table 9 shows an example of the current cultivars defined for barley. Required genetic coefficients include : VAR#

Identification code or number for a specific cultivar.

VAR-NAME Name of cultivar. ECO#

Ecotype code for this cultivar, points to the Ecotype in the ECO file (currently not used).

P1V

Relative amount that development is slowed for each day of unfulfilled vernalization, assuming that 50 days of vernalization is sufficient for all cultivars (0-9).

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

197

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

P1D

Relative amount that development is slowed when plant are grown in a photoperiod 1 hour shorter that the optimum (which is considered to be 20 hours) (1-5).

P5

Relative grain filling duration based on thermal time (degree days above a base temperature of 1oC), where each unit increase above zero adds 40 degree days to an initial value of 300 degree days..

G1

Kernel number per unit weight of stem (less leaf blades and sheaths) plus spike at anthesis (1/g) (1-5).

G2

Kernel filling rate under optimum conditions (mg/day) (1-5).

G3

Non-stressed dry weight of a single stem (excluding leaf blades and sheaths) and spike when elongation ceases (g) (1-5).

PHINT

Phylochron interval; the interval in thermal time (degree days) between successive leaf tip appearances.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

198

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

TABLE 9.

GENETIC COEFFICIENTS FILE

FOR

CERES-BARLEY. ( BACER940.CUL)

*BARLEY GENOTYPE COEFFICIENTS - GECER940 MODEL ! @VAR# VRNAME ECO# P1V P1D P5 ! 1 2 3 ! IB0001 generic (2) IB0001 .5 4.0 2.0 IB0002 generic (6) IB0001 .5 4.0 2.0 IB0003 Golden Promise ( IB0001 .5 4.0 2.0 IB0004 Maris Mink (2) IB0001 .5 3.0 2.0 IB0005 Aramir IB0001 .5 3.4 2.0 IB0006 Georgie (2) IB0001 .5 3.0 2.0 IB0007 Julia IB0001 .5 7.0 5.0 IB0008 Union (2) IB0001 .5 3.6 2.0 IB0009 Tellus IB0001 .5 3.5 2.0 IB0010 Mona IB0001 .5 1.5 2.0 IB0011 Lise IB0001 .5 1.5 2.0 IB0012 Igri (2) IB0001 6.0 3.0 2.0 IB0013 Video (2) IB0001 6.0 3.0 2.0 IB0014 Maris Otter (2) IB0001 3.0 4.5 2.0 IB0015 Proctor (2) IB0001 .5 4.5 5.0 IB0016 Berolina (2) IB0001 .5 4.0 4.0 IB0017 Arena (2) IB0001 .5 4.5 4.0 IB0018 Deba Abed IB0001 .5 3.0 3.0 IB0019 Philip (6) IB0001 .5 3.0 1.5 IB0020 Yokozuna (6) IB0001 .5 3.0 2.0 IB0021 Andrea (6) IB0001 6.0 3.0 3.0 IB0022 Marinka (2) IB0001 6.0 3.0 3.0 IB0023 Catinka (6) IB0001 6.0 3.0 3.0 IB0024 Sonate (2) IB0001 6.0 3.0 3.0 IB0025 Tapir (6) IB0001 6.0 3.0 3.0 IB0026 Franka (6) IB0001 6.0 3.5 3.0 IB0027 Mammut (6) IB0001 6.0 3.0 3.0 IB0028 Maris Puma IB0001 6.0 3.0 3.0 IB0029 Optima (6) IB0001 6.0 3.0 4.0 IB0030 Maris Badger IB0001 .5 7.0 5.0 IB0040 Shabet IB0001 3.0 1.0 5.0 IB0042 Ord Early IB0001 3.0 3.0 1.0 IB0043 Ord Mid-Early IB0001 3.0 3.0 1.0 IB0044 Ord Mid-Late IB0001 3.0 3.0 1.0 IB0045 Ord Late IB0001 3.0 3.0 1.0 IB0051 Azure (6) IB0001 .5 1.0 3.5 IB0052 Bedford (2) IB0001 .5 1.0 3.5 IB0053 Bumper (6) IB0001 .5 1.0 3.5 IB0054 Hector (2) IB0001 .5 1.0 3.5

G1 4

G2 5

5.0 5.0 5.0 5.0 3.0 3.0 3.5 3.0 3.0 3.0 3.0 2.0 4.0 5.0 5.2 3.0 3.0 2.5 4.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 4.0 4.0 2.2 2.2 2.2 2.2 4.0 5.0 4.0 4.0

3.0 3.0 3.0 3.0 3.0 4.0 3.0 3.0 3.0 3.0 3.0 4.0 5.0 3.0 1.1 3.0 3.0 3.0 3.0 5.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.5 5.0 3.0 3.5 3.5 3.5 3.5 3.0 3.0 3.0 3.0

G3 PHINT 6 7 1.0 4.0 2.0 2.0 3.0 2.0 2.0 2.0 3.0 3.0 3.0 3.0 2.5 2.0 .7 2.0 2.0 3.0 4.0 4.0 4.0 2.0 4.0 2.0 4.0 4.0 3.0 3.0 3.0 3.0 2.0 4.0 4.0 4.0 4.0 4.0 2.0 4.0 2.0

95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

199

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

IB0055 IB0056 IB0057 IB0058 IB0059 IB0101 IB0102 IB0103

Larker (6) Robust (6) Summit (2) Bowman (6) Hazen (6) A. Abiad (2) Beecher (6) Algerie (2)

IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001

.5 .5 .5 .5 .5 .5 .5 .5

1.0 1.0 1.0 1.0 1.0 3.0 2.5 3.0

3.5 3.5 3.5 3.5 3.5 4.0 4.0 3.0

4.0 4.0 4.0 4.0 4.0 3.5 2.2 2.0

3.0 3.0 3.0 3.0 3.0 4.0 3.5 2.0

4.0 4.0 2.0 4.0 4.0 2.0 4.0 2.0

95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

200

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

CERES-MAIZE Table 10 shows an example of the current cultivars defined for corn. Required genetic coefficients include : VAR#

Identification code or number for a specific cultivar

VAR-NAME Name of cultivar ECO#

Ecotype code for this cultivar, points to the Ecotype in the ECO file (currently not used).

P1

Thermal time from seedling emergence to the end of the juvenile phase (expressed in degree days above a base temperature of 8oC) during which the plant is not responsive to changes in photoperiod.

P2

Extent to which development (expressed as days) is delayed for each hour increase in photoperiod above the longest photoperiod at which development proceeds at a maximum rate (which is considered to be 12.5 hours).

P5

Thermal time from silking to physiological maturity (expressed in degree days above a base temperature of 8oC).

G2

Maximum possible number of kernels per plant.

G3

Kernel filling rate during the linear grain filling stage and under optimum conditions (mg/day).

PHINT

Phylochron interval; the interval in thermal time (degree days) between successive leaf tip appearances.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

201

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

TABLE 10. GENETIC COEFFICIENTS FILE *MAIZE ! @VAR# ! IB0001 IB0002 IB0003 IB0004 IB0005 IB0006 IB0007 IB0008 IB0009 IB0010 IB0011 IB0012 IB0013 IB0014 IB0015 IB0016 IB0017 IB0018 IB0019 IB0020 IB0021 IB0022 IB0023 IB0024 IB0025 IB0026 IB0027 IB0028 IB0029 IB0030 IB0031 IB0032 IB0033 IB0034 IB0035 IB0036 IB0037 IB0038 IB0039 IB0040

FOR

CERES-MAIZE. (MZCER940.CUL)

GENOTYPE COEFFICIENTS - GECER940 MODEL VRNAME CORNL281 CP170 LG11 F7 X F2 PIO 3995 INRA EDO A654 X F2 DEKALB XL71 F478 X W705A DEKALBXL45 PIO 3382 B59*OH43 F16 X F19 WASHINGTON B14XOH43 R1*(N32*B14) B60*R71 WF9*B37 B59*C103 Garst 8702 B14*C103 B14*C131A PIO 3720 WASH/GRAIN-1 A632 X W117 Garst 8750 TAINAN-11 PIO 3541 PIO 3707 PIO 3475 PIO 3382 PIO 3780 PIO 3780* McCurdy 84aa C281 SWEET CORN Garst 8555 PIO 3901 B8*153R

ECO# IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001

P1 1 110.0 120.0 125.0 125.0 130.0 135.0 135.0 135.0 140.0 140.0 150.0 160.0 162.0 165.0 165.0 172.0 172.0 172.0 172.0 172.0 175.0 180.0 180.0 180.0 185.0 187.0 190.0 200.0 200.0 200.0 200.0 200.0 200.0 200.0 200.0 202.0 210.0 215.0 215.0 218.0

P2 2 0.300 0.000 0.000 0.000 0.300 0.000 0.300 0.000 0.300 0.000 0.400 0.700 0.800 0.000 0.400 0.300 0.800 0.800 0.800 0.800 0.200 0.500 0.500 0.800 0.400 0.000 0.200 0.800 0.300 0.700 0.700 0.700 0.760 0.760 0.300 0.300 0.520 0.400 0.760 0.300

P5 3 685.0 685.0 685.0 685.0 685.0 685.0 685.0 685.0 685.0 685.0 685.0 890.0 685.0 685.0 715.0 685.0 685.0 685.0 685.0 685.0 960.0 685.0 685.0 685.0 775.0 685.0 930.0 670.0 800.0 800.0 800.0 800.0 685.0 685.0 940.0 685.0 625.0 890.0 600.0 760.0

G2 4 825.4 825.4 825.4 825.4 825.4 825.4 825.4 825.4 825.4 825.4 825.4 750.0 784.0 825.4 750.0 825.4 825.4 710.4 825.4 825.4 778.0 825.4 825.4 825.4 760.0 825.4 810.0 730.0 700.0 590.0 725.0 650.0 600.0 725.0 700.0 825.4 825.0 800.0 560.0 575.0

G3 5 6.60 10.00 10.00 10.00 8.60 10.00 10.40 10.00 10.50 10.00 10.15 8.50 6.90 10.00 11.00 8.50 10.15 7.70 10.15 10.15 6.00 10.15 10.15 10.00 12.00 10.00 6.30 6.80 8.50 6.30 8.60 8.50 9.60 9.60 8.00 5.80 10.00 9.00 9.00 8.80

PHINT 6 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

202

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

IB0041 IB0042 IB0043 IB0044 IB0045 IB0046 IB0047 IB0048 IB0049 IB0050 IB0051 IB0052 IB0053 IB0054 IB0055 IB0056 IB0057 IB0058 IB0059 IB0060 IB0061 IB0062 IB0063 IB0064 IB0065

Garst 8808 B73 X MO17 PIO 511A W69A X F546 A632 X VA26 W64A X W117 PIO 3147 WF9*B37 NEB 611 PV82S PV76S PIO 3183 CESDA-28 B14*OH43 MCCURDY 6714 FM 6 TOCORON-3 NC+59 H6 H610(UH) PB 8 B56*C131A PIO X 304C H.OBREGON SUWAN-1

IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001

220.0 220.0 220.0 240.0 240.0 245.0 255.0 260.0 260.0 260.0 260.0 260.0 260.0 265.0 265.0 276.0 276.0 280.0 310.0 300.0 300.0 318.0 320.0 360.0 380.0

0.400 0.520 0.300 0.300 0.300 0.000 0.760 0.800 0.300 0.500 0.500 0.500 0.500 0.800 0.300 0.520 0.520 0.300 0.300 0.520 0.520 0.500 0.520 0.800 0.600

780.0 880.0 685.0 685.0 685.0 685.0 685.0 710.0 720.0 750.0 750.0 750.0 669.0 665.0 825.0 867.0 867.0 750.0 685.0 920.0 990.0 700.0 940.0 685.0 780.0

780.0 730.0 645.0 825.4 825.4 825.4 834.0 825.4 825.0 600.0 600.0 600.0 780.0 780.0 825.4 616.0 600.0 825.0 825.4 580.0 400.0 805.0 625.0 825.4 750.0

8.50 10.00 10.50 10.00 10.00 8.00 10.00 6.50 9.00 8.50 8.50 8.50 7.10 6.90 9.80 10.70 8.12 10.00 10.00 6.40 7.00 6.40 6.00 10.15 7.00

75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00 75.00

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

203

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

CERES-MILLET Table 11 shows an example of the current cultivars defined for millet. Required genetic coefficients include : VAR#

Identification code xor number for a specific cultivar

VAR-NAME Name of cultivar ECO#

Ecotype code for this cultivar, points to the Ecotype in the ECO file (currently not used).

P1

Thermal time from seedling emergence to the end of the juvenile phase (expressed in degree days above a base temperature of 10oC) during which the plant is not responsive to changes in photoperiod.

P2O

Critical photoperiod or the longest day length (in hours) at which development occurs at a maximum rate. At values greater than P2O, the rate of development is reduced.

P2R

Extent to which phasic development leading to panicle initiation (expressed in degree days) is delayed for each hour increase in photoperiod above P2O.

P5

Thermal time (degree days above a base temperature of 10oC) from beginning of grain filling (3-4 days after flowering) to physiological maturity.

G1

Scaler for relative leaf size.

G4

Scaler for partitioning of assimilates to the panicle (head).

PHINT

Phylochron interval; the interval in thermal time (degree days) between successive leaf tip appearances.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

204

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

TABLE 11. GENETIC COEFFICIENTS FILE

FOR

CERES-MILLET. (MLCER940.CUL)

*MILLET GENOTYPE COEFFICIENTS - GECER940 MODEL ! ! @VAR# VRNAME ECO# P1 P20 P2R ! 1 2 3 IB0033 BJ104 IB0001 120.0 13.40 145.0 IB0034 CZH-859 IB0001 170.0 12.10 138.0 IB0035 CZP-87 IB0001 136.0 12.40 130.0 IB0036 CZMP-2 IB0001 135.0 12.60 140.0 IB0037 MBH-110 IB0001 140.0 12.50 148.0 IB0038 RCB-2 IB0001 136.0 12.10 135.0 IB0039 CZP-78 IB0001 136.0 12.10 125.0 IB0040 CZP-85 IB0001 142.0 12.30 130.0 IB0041 WCC-75 IB0001 160.0 12.00 142.0 IB0042 CZP-84 IB0001 138.0 12.20 128.0 IB0043 CZH-83-J1 IB0001 136.0 12.60 130.0 IB0044 CIVT IB0001 120.0 12.00 142.0

P5 4 340.0 420.0 370.0 370.0 365.0 365.0 362.0 380.0 422.0 360.0 350.0 590.0

G1 5 1.50 2.13 2.10 2.00 2.12 2.14 2.00 2.15 2.10 2.30 2.30 1.00

G4 6 1.00 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50

PHINT 7 95.00 95.0 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

205

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

CERES-SORGHUM Table 12 shows an example of the current cultivars defined for sorghum. Required genetic coefficients include : VAR#

Identification code or number for a specific cultivar.

VAR-NAME Name of cultivar. ECO#

Ecotype code for this cultivar, points to the Ecotype in the ECO file (currently not used).

P1

Thermal time from seedling emergence to the end of the juvenile phase(expressed in degree days above a base temperature of 8oC) during which the plant is not responsive to changes in photoperiod.

P2O

Critical photoperiod or the longest day length (in hours) at which development occurs at a maximum rate. At values higher than P2O, the rate of development is reduced.

P2R

Extent to which phasic development leading to panicle initiation (expressed in degree days) is delayed for each hour increase in photoperiod above P2O.

P5

Thermal time (degree days above a base temperature of 8oC) from beginning of grain filling (3-4 days after flowering) to physiological maturity.

G1

Scaler for relative leaf size.

G2

Scaler for partitioning of assimilates to the panicle (head).

PHINT

Phylochron interval; the interval in thermal time (degree days) between successive leaf tip appearances.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

206

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop



TABLE 12. GENETIC COEFFICIENTS FILE *SORGHUM GENOTYPE COEFFICIENTS ! @VAR# VRNAME ECO# ! IB0001 RIO IB0001 IB0002 9188 IB0001 IB0003 BRANDES IB0001 IB0004 MN1500 IB0001 IB0005 HEGARI IB0001 IB0006 100M IB0001 IB0007 80M IB0001 IB0008 60M IB0001 IB0009 SM100 IB0001 IB0010 SM80 IB0001 IB0011 SM60 IB0001 IB0012 REDLON IB0001 IB0013 CAPROCK IB0001 IB0014 ATx378XRTx7000 IB0001 IB0015 ATx623 IB0001 IB0016 RTx430 IB0001 IB0017 ATx623XRTx430 IB0001 IB0018 BTx3197 IB0001 IB0019 RTx7078 IB0001 IB0020 TX 610 IB0001 IB0021 WHEATLAND IB0001 IB0022 ATx399XRTx430 IB0001 IB0023 ATx378XRTx430 IB0001 IB0024 ATx623XRTx7000 IB0001 IB0025 38M IB0001 IB0026 CSH-1 IB0001 IB0027 DE KALB 46 IB0001 IB0028 PIONEER 8333 IB0001 IB0029 DK IB0001 IB0030 PIONEER 8515 IB0001 IB0031 RS 626 IB0001 IB0032 DK- E57 IB0001 IB0040 RS610 IB0001 IB0041 NK212 IB0001 IB0042 PIONEER 846 IB0001 IB0043 CSH-6 IB0001 IB0044 CSH-6 IB0001 IB0046 M-35-1 IB0001 IB0047 SPV-504 IB0001 IB0048 CSH-5 IB0001 IB0049 CSH-9 IB0001 IB0050 SPH-388 IB0001

FOR

CERES-SORGHUM. (SGCER940.CUL)

- GECER940 MODEL P1 1 430.0 393.0 374.0 495.0 273.0 291.0 337.0 337.0 365.0 356.0 365.0 393.0 393.0 384.0 380.0 400.0 390.0 411.0 421.0 180.0 365.0 393.0 411.0 374.0 291.0 410.0 325.0 325.0 200.0 275.0 300.0 325.0 460.0 420.0 480.0 410.0 320.0 320.0 310.0 255.0 225.0 232.0

P2O 2 11.60 13.00 11.00 11.80 11.50 11.00 12.60 12.80 13.00 12.00 12.20 12.50 12.80 11.30 13.00 13.00 13.00 13.00 14.40 16.50 12.50 12.80 12.50 13.00 13.00 13.60 15.50 15.50 15.50 15.50 15.50 15.50 12.50 15.50 12.50 13.60 13.50 14.00 13.00 13.50 13.50 12.50

P2R 3 24.0 23.0 116.0 139.0 136.0 127.0 262.0 290.0 45.0 74.0 74.0 30.0 84.0 24.0 35.0 123.0 35.0 108.0 221.0 1.0 30.0 40.0 20.0 14.0 12.0 40.0 30.0 30.0 12.0 30.0 30.0 30.0 90.0 30.0 190.0 40.0 180.0 45.6 35.0 40.5 45.1 43.7

P5 4 540.0 540.0 540.0 540.0 540.0 540.0 540.0 540.0 540.0 540.0 540.0 540.0 540.0 540.0 540.0 540.0 540.0 540.0 540.0 580.0 540.0 540.0 540.0 540.0 540.0 540.0 540.0 540.0 540.0 500.0 400.0 450.0 600.0 500.0 650.0 510.0 540.0 556.0 554.0 490.0 573.0 590.0

G1 5 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 .0 22.0 .0 .0 .0 .0 .0 3.0 9.0 11.0 .0 .0 .0 13.0 5.0 13.0 5.0 7.0 7.0 15.0 15.0 10.0 10.0 10.0

G2 6 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 5.5 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 5.0 4.5 5.5 4.5 4.5 5.5 5.5 4.5

PHINT 7 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00 49.00

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

207

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

C E R E S - W H E AT Table 13 shows an example of the current cultivars defined for wheat. Required genetic coefficients include : VAR#

Identification code or number for a specific cultivar.

VAR-NAME Name of cultivar. ECO#

Ecotype code for this cultivar, points to the Ecotype in the ECO file (currently not used).

P1V

Relative amount that development is slowed for each day of unfulfilled vernalization, assuming that 50 days of vernalization is sufficient for all cultivars.

P1D

Relative amount that development is slowed when plants are grown in a photoperiod 1 hour shorter than the optimum (which is considered to be 20 hours).

P5

Relative grain filling duration based on thermal time (degree days above a base temperature of 1oC), where each unit increase above zero adds 20 degree days to an initial value of 430 degree days.

G1

Kernel number per unit weight of stem (less leaf blades and sheaths) plus spike at anthesis (1/g).

G2

Kernel filling rate under optimum conditions (md/dy).

G3

Non-stressed dry weight of a single stem (excluding leaf blades and sheaths) and spike when elongation ceases (g).

PHINT

Phylochron interval; the interval in thermal time (degree days) between successive leaf tip appearances.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

208

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

TABLE 13. GENETIC COEFFICIENTS FILE *WHEAT ! @VAR# ! IB0001 IB0002 IB0003 IB0004 IB0005 IB0006 IB0030 IB0031 IB0032 IB0033 IB0034 IB0178 IB0221 IB0222 IB0223 IB0224 IB0326 IB0333 IB0368 IB0411 IB0446 IB0459 IB0460 IB0469 IB0470 IB0487 IB0488 IB0489 IB0494 IB0495 IB0496 IB0500 IB0501 IB0510 IB0515 IB0519 IB0536 IB0541 IB0542 IB0543 IB0547

FOR

CERES-WHEAT. (WHCER940.CUL)

GENOTYPE COEFFICIENTS - GECER940 MODEL VRNAME CONDO (DURUM) WARED WALDRON ELLAR BUTTE WARD (DURUM) RONGOTEA KOPARA BOUNTY MOULIN AVALON CENTURK HERON SHERPA GABO BENCUBBIN GAMENYA SST TRIUMPH CARIBO IMPROVED TRIUMPH LANCER LEEDS STURDY NOR.KING #812 SCOUT 66 NEWTON NEWANA GAGE KOLIBRI KLEIBER TAM 105 IMIA 66 PAHA ROLETTE WANSER COULEE TAM W 101 NUGAINES PAWNEE CLOUD

ECO# IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001

P1V 1 .5 .5 .5 .5 .5 .5 .5 .5 6.0 6.0 6.0 6.0 .5 .5 .5 .5 .5 3.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 .5 6.0 .5 .5 6.0 6.0 6.0 6.0 6.0 6.0 3.0 6.0 6.0 6.0

P1D 2 1.5 2.7 2.7 2.7 2.7 1.5 2.7 2.7 3.7 3.9 4.0 2.5 2.3 3.1 3.1 4.5 3.3 3.0 1.9 4.4 1.3 1.7 2.7 1.0 1.0 2.4 2.5 4.5 2.2 3.3 3.0 3.3 2.7 2.7 2.7 2.7 2.7 3.0 2.7 2.6 2.0

P5 3 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.1 2.1 2.0 2.0 2.0 1.0 2.5 2.5 6.0 4.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.5 3.0 2.0 2.5 3.0 2.5 2.0 2.0 2.0 2.0 2.0 2.5 3.0 2.0 2.0

G1 4 5.3 5.0 5.0 4.7 2.8 3.6 1.6 1.6 3.2 3.8 3.0 4.3 2.0 3.5 1.8 1.2 4.6 4.4 2.8 4.0 2.8 2.8 2.8 3.9 3.9 3.8 3.4 4.8 2.8 4.0 3.6 2.8 2.8 2.8 2.8 3.0 2.8 4.1 5.5 2.8 2.8

G2 5 1.9 1.8 1.7 1.8 2.4 1.6 3.9 3.9 2.5 2.1 2.7 1.7 2.0 2.5 3.0 3.0 2.7 4.9 1.6 3.1 4.1 1.6 1.6 2.3 2.3 2.4 2.6 3.3 1.6 3.1 3.1 3.0 1.6 1.6 1.6 3.1 1.6 3.0 3.6 1.6 1.6

G3 6 1.9 1.9 1.9 1.9 1.9 1.9 1.7 1.7 1.7 1.8 1.7 1.2 4.0 5.0 5.0 4.9 4.9 1.7 1.9 2.6 1.9 1.9 1.9 1.5 1.9 1.3 1.4 1.7 1.9 2.1 2.1 1.8 1.9 1.9 1.9 1.9 1.9 1.8 2.3 1.9 1.9

PHINT 7 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

209

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

IB0548 IB0551 IB0552 IB0553 IB0555 IB0563 IB0599 IB0610 IB0700 IB0701 IB0702 IB0777 IB1001 IB1002 IB1003 IB1004 IB1005 IB1006 IB1007 IB1008 IB1009 IB1010 IB1011 IB1012 IB1013 IB1014 IB1015 IB1015 IB1016 IB1017 IB1018 IB1019 IB1020 IB1021 IB1022 IB1023 IB1024 IB1025 IB1500 IB1907 IB1908 IB1909 IB2001 IB2004 IB2006 IB2008 IB2011

TRISON ARTHUR TITAN FRANKENMUTH ISRAEL SW EAGLE VONA SAGE BEZOSTAYA MIRONOVSKAYA ROUGHRIDER ESTANZ. DORADO ATLE CAPELLE DESPREZ JUFY 2 LELY DONATA MARIS HOBBIT MARIS HUNTSMAN2 TALENT HYSLOP LUKE ARMINDA CAPITOLE TOP COURTOT MARIS FUNDEN STEPHENS YAMHILL MARIS HUNTSMAN HD2160(INDIA) FARO NIMBUS SCHIROKKO ARKAS TURBO MARIS MARDLER STARKEII MANITOU MEXIPAK SONALIKA NOVI SAD ANZA COKER 6815 NADADORES PENJAMO PLAINSMAN

IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001

6.0 6.0 3.0 6.0 .5 6.0 6.0 6.0 6.0 6.0 6.0 1.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 .5 6.0 6.0 .5 .5 .5 6.0 6.0 .5 .5 .5 .5 .5 6.0 .5 .5 6.0

2.7 2.7 2.0 2.7 3.0 3.5 3.1 2.7 2.9 2.9 2.9 4.0 2.7 4.2 2.7 3.5 3.5 2.7 2.9 3.3 2.7 2.7 2.7 3.2 3.5 3.3 3.5 3.3 3.3 3.5 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.0 1.8 3.5 3.4 1.0 2.7 2.7 2.7

2.0 2.0 4.5 2.0 4.5 2.0 2.5 2.0 5.0 5.0 5.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.5 2.0 2.0 2.0 2.5 3.5 2.5 4.0 2.5 2.5 4.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 1.0 .0 2.0 3.5 2.0 2.0 2.0 2.0 2.0 2.0

2.8 4.2 4.3 3.8 2.9 3.2 3.9 2.8 4.3 4.8 4.8 3.0 1.3 1.7 2.8 4.8 4.4 3.6 3.9 3.5 3.0 2.8 4.3 3.1 3.2 3.4 2.8 3.5 3.9 3.9 4.0 4.3 4.6 4.7 4.0 4.8 4.8 4.0 4.9 2.9 4.0 4.0 3.5 4.1 2.8 2.8 2.8

1.6 2.1 3.1 1.6 4.7 3.0 1.6 1.6 3.1 3.1 3.1 3.0 1.6 2.9 1.6 2.8 3.0 3.1 3.9 3.8 1.6 1.3 4.6 3.6 3.3 3.1 2.7 6.8 5.5 3.0 2.9 4.9 4.0 3.4 3.1 3.3 3.3 2.4 1.8 3.0 1.9 1.3 2.7 3.1 1.6 1.6 1.6

1.9 1.9 1.9 1.9 2.6 1.9 1.7 1.9 1.9 1.9 1.9 3.0 1.9 3.7 1.9 4.4 1.7 3.6 2.2 1.9 1.9 1.9 1.9 1.0 1.9 1.0 1.9 2.7 2.8 2.2 2.4 2.6 2.1 2.0 2.1 2.1 2.1 2.1 1.7 1.7 1.7 1.7 4.4 1.9 1.9 1.9 1.9

95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

210

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥

IB2012 IB2013 IB2014 IB2123 IB2124 IB4000 IB4001 IB9800

PRODURA TAMU WALDRON EGRET WW33G SQUAREHD MASTER JUFY1 FREDERICK

IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001 IB0001

.5 6.0 .5 .5 .5 6.0 .5 6.0

3.1 2.7 1.5 3.0 3.0 4.7 3.0 2.7

2.5 2.0 2.0 2.0 2.0 2.0 2.0 2.0

3.3 2.8 2.8 2.6 3.7 1.1 1.8 3.8

3.3 1.6 1.6 3.3 1.8 2.2 2.5 1.6

5.3 1.9 1.9 2.7 2.4 1.9 3.9 1.9

95.00 95.00 95.00 95.00 95.00 95.00 95.00 95.00

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

211

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

CROPGRO-DRY BEAN Table 14 shows an example of the current cultivars defined for dry bean. Required genetic coefficients include : VARTY

Also VAR#; the identification code or number for a specific cultivar.

VRNAME

Name of cultivar.

ECONO

Also ECO#; the ecotype code for this cultivar, points to the Ecotype in the ECO (BNGRO940.ECO) file.

CSDVAR

Also CSDL; critical daylength below which reproductive development proceeds unaffected by daylength, and above which development rate is reduced in proportion to hours above CSDVAR (h).

PPSEN

Slope of relative rate of development for daylengths above CSDVAR, or sensitivity to photoperiod (1/h).

PH2T5

Also EM-FL; the time from end of juvenile phase to first flower in photothermal days, which is equal to the minimum duration under optimal temperature and photoperiod (photothermal days).

PHTHRS(6)

Also FL-SH; the time from first flower to first pod greater than 0.5 cm in photothermal days, which is equal to the minimum duration under optimal temperature and photoperiod (photothermal days).

PHTHRS(8)

Also FL-SD the time from first flower to first seed in photothermal days, which is equal to the minimum duration under optimal temperature and photoperiod (photothermal days).

PHTHRS(10) Also SD-PM the time from first seed to physiological maturity in photo-thermal days, which is equal to the minimum duration under optimal temperature and photoperiod (photothermal days). PHTHRS(13) Also FL-LF the time from first flower to end of leaf growth in photo-thermal days, which is equal to the minimum duration under optimal temperature and photoperiod (photothermal days).

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

212

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

LFMAX

Maximum leaf photosynthesis rate at saturated light level, optimal temperature (micromol (CO2 /m2s))

SLAVAR

Specific leaf area (SLA) for new leaves during peak vegetative growth for cultivar I, modified by environmental factors (cm2/g).

SIZLF

Maximum size of fully expanded leaf on the plant under standard growing conditions (3 leaflets), cm2

XFRUIT

Maximum fraction of daily available gross photosynthesis (PG) which is allowed to go to seeds plus shells for cultivar I, varies from 0 - 1.

WTPSD

Maximum weight per seed under non-limiting substrate (g).

SFDUR

Seed filling duration for a cohort of seed (photothermal days).

SDPDVR

Also SDPDV; average seed per pod under stnadard growing conditions.

PODUR

Photothermal days for cultivar to add full pod load under optimal conditions, used to compute rate of pod and flower addition.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

213

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

TABLE 14. GENETIC COEFFICIENTS FILE

FOR

CROPGRO-DRY BEAN. (BNGRO940.CUL)

*DRYBEAN GENOTYPE COEFFICIENTS - CRGRO94 MODEL @VAR# ! 990006 990001 990002 990003 990004 990005 990007

VRNAME

ECO# CSDL 1 MesoAm Hab 2 & 3 MESIND 12.17 Andean Habit 1 ANDDET 12.17 Andean Habit 2 ANDIND 12.17 Andean Habit 3 ANDIND 12.17 Andean Habit 4 ANDIND 12.17 Meso Amer. Hab.1 MESDET 12.17 Mex Highland H 3 MEXHIL 12.17

PPSEN 2 0.000 0.050 0.050 0.050 0.050 0.000 0.050

IB0001 IB0002 IB0003 IB0004 IB0005 IB0006 IB0007 IB0008 IB0010 IB0011 IB0012 IB0013 IB0014

Porillo Sintet BAT 477+ Seafarer C-20 BAT 881 ICTA-Ostua Rabia de Gato TURBO-III Carioca (G4017) Isabella Manitou Redkloud Canadian Wonder

0.008 0.000 0.000 0.000 0.000 0.000 0.040 0.050 0.000 0.000 0.000 0.000 0.000

MESIND MESIND MESDET MESIND MESIND MESIND MESIND MESIND MESIND ANDDET ANDDET ANDDET ANDDET

13.17 12.17 12.17 12.17 12.17 12.17 12.17 12.17 12.17 12.17 12.17 12.17 12.17

EM-FL FL-SH FL-SD SD-PM FL-LF LFMAX SLAVR SIZLF 3 4 5 6 7 8 9 10 32.0 2.0 9.0 24.00 18.00 1.00 320. 133.0 24.5 2.0 11.0 25.50 16.00 1.00 295. 133.0 26.0 4.0 11.0 26.50 18.00 1.00 350. 133.0 30.0 4.5 9.5 28.00 22.00 1.00 350. 133.0 34.0 5.0 9.0 34.00 34.00 1.00 350. 133.0 27.0 4.0 9.0 22.00 16.00 1.00 350. 133.0 27.0 4.0 8.0 26.00 20.00 1.00 350. 133.0 32.0 32.0 25.0 32.0 33.0 27.0 24.0 30.0 33.5 25.0 28.0 24.5 24.5

2.0 2.0 5.0 5.0 2.0 3.0 3.0 4.0 3.0 3.0 3.0 2.0 2.0

9.0 9.0 09.0 09.0 9.0 8.0 8.0 9.0 11.0 8.0 8.0 11.0 11.0

23.00 24.00 23.00 24.00 24.00 23.00 21.00 23.00 24.00 20.00 23.00 25.50 25.50

18.00 18.00 22.00 22.00 18.00 22.00 22.00 22.00 18.00 9.00 9.00 7.00 7.00

1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 0.90 1.00 1.00 1.00 1.00

320. 320. 350. 350. 300. 295. 295. 295. 270. 295. 295. 305. 295.

133.0 133.0 133.0 133.0 133.0 133.0 133.0 133.0 133.0 133.0 133.0 133.0 133.0

XFRT 11 1.00 1.00 1.00 1.00 1.00 1.00 1.00

WTPSD 12 0.230 0.550 0.600 0.650 0.650 0.230 0.440

SFDUR 13 14.0 11.0 11.0 20.0 22.0 16.0 17.0

SDPDV PODUR 14 15 5.20 8.0 3.50 3.5 3.50 3.5 4.20 5.0 5.20 6.0 5.20 5.0 3.20 5.0

1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

0.210 0.230 0.180 0.170 0.230 0.200 0.180 0.180 0.250 0.290 0.550 0.550 0.550

15.0 14.0 17.0 17.0 14.0 17.0 17.0 17.0 15.0 15.0 15.0 11.0 11.0

5.20 10.0 5.20 8.0 5.00 8.0 5.00 8.0 5.20 8.0 5.40 5.0 5.40 5.0 4.00 5.0 5.00 6.5 3.50 10.0 3.50 10.0 3.50 3.5 3.50 3.5

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

214

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥

CROPGRO-PEANUT Table 15 shows an example of the current cultivars defined for peanut. Required genetic coefficients include : VARTY

Also VAR#; the identification code or number for a specific cultivar.

VRNAME

Name of cultivar.

ECONO

Also ECO#; the ecotype code for this cultivar, points to the Ecotype in the ECO (PNGRO940.ECO) file.

CSDVAR

Also CSDL; critical daylength below which reproductive development proceeds unaffected by daylength, and above which development rate is reduced in proportion to hours above CSDVAR (h).

PPSEN

Slope of relative rate of development for daylengths above CSDVAR, or sensitivity to photoperiod (1/h).

PH2T5

Also EM-FL; the time from end of juvenile phase to first flower in photothermal days, which is equal to the minimum duration under optimal temperature and photoperiod (photothermal days).

PHTHRS(6)

Also FL-SH; the time from first flower to first peg, in photothermal days, which is equal to the minimum duration under optimal temperature and photoperiod (photothermal days).

PHTHRS(8)

Also FL-SD the time from first flower to first seed in photothermal days, which is equal to the minimum duration under optimal temperature and photoperiod (photothermal days).

PHTHRS(10) Also SD-PM the time from first seed to physiological maturity in photothermal days, which is equal to the minimum duration under optimal temperature and photoperiod (photothermal days). PHTHRS(13) Also FL-LF the time from first flower to end of leaf growth in photothermal days, which is equal to the minimum duration under optimal temperature and photoperiod (photothermal days). DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

215

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

LFMAX

Maximum leaf photosynthesis rate at saturated light level, optimal temperature (micromol (CO2 /m2s))

SLAVAR

Specific leaf area (SLA) for new leaves during peak vegetative growth for cultivar I, modi-fied by environmental factors (cm2/g).

SIZLF

Maximum size of fully expanded leaf on the plant under standard growing conditions (3 leaflets), cm2

XFRUIT

Maximum fraction of daily available gross photosynthesis (PG) which is allowed to go to seeds plus shells for cultivar I, varies from 0 - 1.

WTPSD

Maximum weight per seed under non-limiting substrate (g).

SFDUR

Seed filling duration for a cohort of seed (photothermal days).

SDPDVR

Also SDPDV; average seed per pod under stnadard growing conditions.

PODUR

Photothermal days for cultivar to add full pod load under optimal conditions, used to compute rate of pod and flower addition.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

216

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

TABLE 15. GENETIC COEFFICIENTS FILE

FOR

CROPGRO-PEANUT. (PNGR094.CUL)

*PEANUT GENOTYPE COEFFICIENTS - CRGRO940 MODEL @VAR# ! 990001 990002 990003

VRNAME

ECO# CSDL 1 V EARLY SPANISH PN0006 11.84 EARLY VALENCIA PN0007 11.84 MEDIUM VIRGINIA PN0005 11.84

PPSEN 2 0.00 0.00 0.00

EM-FL FL-PG FL-SD SD-PM FL-LF 3 4 5 6 7 18.4 6.5 17.0 83.70 73.20 18.4 6.5 17.0 83.70 73.20 18.4 6.5 17.0 83.70 73.20

LFMAX 8 1.30 1.30 1.30

SLAVR 9 230. 230. 230.

SIZLF 10 20.0 20.0 20.0

XFRT 11 0.95 0.95 0.95

WTPSD 12 0.575 0.575 0.575

SFDUR 13 37.0 37.0 37.0

SDPDV 14 1.70 1.70 1.70

PODUR 15 35.0 35.0 35.0

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

217

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

CROPGRO-SOYBEAN Table 16 shows an example of the current cultivars defined for soybean. Required genetic coefficients include : VARTY

Also VAR#; the identification code or number for a specific cultivar.

VRNAME

Name of cultivar.

ECONO

Also ECO#; the ecotype code for this cultivar, points to the Ecotype in the ECO (SBGRO940.ECO) file.

CSDVAR

Also CSDL; critical daylength below which reproductive development proceeds unaffected by daylength, and above which development rate is reduced in proportion to hours above CSDVAR (h).

PPSEN

Slope of relative rate of development for daylengths above CSDVAR, or sensitivity to photoperiod (1/h).

PH2T5

Also EM-FL; the time from end of juvenile phase to first flower in photothermal days, which is equal to the minimum duration under optimal temperature and photoperiod (photothermal days).

PHTHRS(6)

Also FL-SH; the time from first flower to first pod greater than 0.5 cm in photothermal days, which is equal to the minimum duration under optimal temperature and photoperiod (photothermal days).

PHTHRS(8)

Also FL-SD the time from first flower to first seed in photothermal days, which is equal to the minimum duration under optimal temperature and photoperiod (photothermal days).

PHTHRS(10) Also SD-PM the time from first seed to physiological maturity in photothermal days, which is equal to the minimum duration under optimal temperature and photoperiod (photothermal days). PHTHRS(13) Also FL-LF the time from first flower to end of leaf growth in photothermal days, which is equal to the minimum duration under optimal temperature and photoperiod (photothermal days).

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

218

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

LFMAX

Maximum leaf photosynthesis rate at saturated light level, optimal temperature (micromol (CO2 /m2s))

SLAVAR

Specific leaf area (SLA) for new leaves during peak vegetative growth for cultivar I, modified by environmental factors (cm2/g).

SIZLF

Maximum size of fully expanded leaf on the plant under standard growing conditions (3 leaflets), cm2

XFRUIT

Maximum fraction of daily available gross photosynthesis (PG) which is allowed to go to seeds plus shells for cultivar I, varies from 0 - 1.

WTPSD

Maximum weight per seed under non-limiting substrate (g).

SFDUR

Seed filling duration for a cohort of seed (photothermal days).

SDPDVR

Also SDPDV; average seed per pod under stnadard growing conditions.

PODUR

Photothermal days for cultivar to add full pod load under optimal conditions, used to compute rate of pod and flower addition.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

219

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

TABLE 16. GENETIC COEFFICIENTS FILE

FOR

CROPGRO-SOYBEAN. (SBGRO940.CUL)

*SOYBEAN GENOTYPE COEFFICIENTS - CRGRO940 MODEL @VAR# ! 990001 990002 990003 990004 990005 990006 990007 990008 990009 990010 990011 990012 990013

VRNAME

UC0001 UC0002 UC0003 IB0011 IB0037 IB0003 IB0009 IB0010 IB0043 IB0008 IB0001 IB0006 IB0002 IB0033 IB0012

ALTONA (00) MAPLE ARROW (00) MCCALL (00) EVANS (0) ELGIN-87 (2) WAYNE (3) WILLIAMS (3) WILLIAMS-82 (3) CLARK (4) FORREST (5) BRAGG (7) RANSOM (7) COBB (8) PAPILLON (9) JUPITER (10)

M M M M M M M M M M M M M

GROUP 1 GROUP 2 GROUP 3 GROUP 4 GROUP 5 GROUP 6 GROUP 7 GROUP 8 GROUP 9 GROUP 10 GROUP 000 GROUP 00 GROUP 0

ECO# CSDL 1 SB0101 13.84 SB0201 13.59 SB0301 13.40 SB0401 13.09 SB0501 12.83 SB0601 12.58 SB0701 12.33 SB0801 12.07 SB0901 11.88 SB1001 11.78 SB0001 14.60 SB0001 14.35 SB0001 14.10

PPSEN 2 0.203 0.249 0.285 0.294 0.303 0.311 0.320 0.330 0.340 0.349 0.129 0.148 0.171

SB0001 SB0001 SB0001 SB0001 SB0201 SB0302 SB0301 SB0301 SB0502 SB0501 SB0701 SB0701 SB0801 SB0901 SB0901

0.148 0.148 0.148 0.171 0.240 0.226 0.285 0.285 0.303 0.303 0.320 0.320 0.330 0.340 0.340

14.42 14.42 14.42 14.00 13.65 13.50 13.45 13.45 12.83 12.83 12.33 12.37 12.25 11.88 11.88

EM-FL 3 17.0 17.4 19.0 19.4 19.8 20.2 20.8 21.5 23.0 23.5 15.5 16.0 16.8

FL-SH 4 6.0 6.0 6.0 7.0 8.0 9.0 10.0 10.0 10.0 10.0 5.0 5.0 6.0

FL-SD 5 13.0 13.5 14.0 15.0 15.5 16.0 16.0 16.0 16.0 16.0 12.0 12.0 13.0

SD-PM 6 32.00 33.00 34.00 34.50 35.00 35.50 36.00 36.00 36.50 37.00 29.50 30.00 31.00

FL-LF 7 30.00 30.00 30.00 30.00 15.00 15.00 15.00 15.00 15.00 15.00 30.00 30.00 30.00

LFMAX 8 1.022 1.022 1.022 1.022 1.022 1.022 1.022 1.022 1.022 1.022 1.022 1.022 1.022

SLAVR 9 350. 350. 350. 350. 350. 350. 350. 350. 350. 350. 350. 350. 350.

SIZLF 10 180.0 180.0 180.0 180.0 180.0 180.0 180.0 180.0 180.0 180.0 180.0 180.0 180.0

XFRT 11 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

WTPSD 12 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18

SFDUR 13 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0

SDPDV 14 2.05 2.05 2.05 2.05 2.05 2.05 2.05 2.05 2.05 2.05 2.05 2.05 2.05

PODUR 15 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0

17.5 7.5 14.0 33.00 33.00 1.022 17.8 7.0 13.0 33.50 33.00 1.022 17.0 5.5 12.0 34.00 33.00 1.022 16.8 6.5 12.4 33.00 31.00 1.022 17.4 6.0 10.7 33.00 31.50 1.022 21.0 8.0 15.5 30.00 25.00 1.022 20.5 9.0 16.0 30.00 30.00 1.022 19.5 8.0 15.0 31.50 30.00 1.022 18.0 9.0 15.0 32.00 30.00 1.022 22.6 7.0 14.5 33.00 15.00 1.022 19.5 10.0 15.0 35.50 15.00 1.022 18.0 10.0 16.0 32.00 15.00 1.022 21.0 9.0 16.0 37.00 15.00 1.022 28.0 6.0 11.0 30.00 15.00 1.022 28.9 7.0 13.5 31.50 15.00 1.022

350. 350. 350. 360. 380. 380. 350. 350. 390. 350. 350. 350. 380. 350. 350.

180.0 180.0 180.0 180.0 150.0 135.0 120.0 120.0 200.0 140.0 170.0 170.0 180.0 180.0 180.0

1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

0.18 0.18 0.18 0.18 0.18 0.16 0.18 0.18 0.18 0.18 0.18 0.18 0.15 0.18 0.18

16.0 16.0 16.0 24.0 20.0 20.0 24.0 24.0 20.0 23.0 22.0 22.0 22.0 22.0 22.0

2.05 2.05 2.05 2.05 2.05 2.20 2.50 2.50 2.10 2.05 2.05 2.05 1.90 2.05 2.05

12.0 10.5 9.0 12.0 10.0 21.0 15.0 10.0 12.0 9.0 10.0 10.0 10.0 20.0 20.0

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

220

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

CERES-RICE Table 17 shows an example of the current cultivars defined for rice. Required genetic coefficients include : VAR#

Identification code or number for a specific cultivar.

VAR-NAME Name of cultivar. ECO#

Ecotype code for this cultivar, points to the Ecotype in the ECO file (currently not used).

P1

Time period (expressed as growing degree days [GDD] in oC above a base temperature of 9oC) from seedling emergence during which the rice plant is not responsive to changes in photoperiod. This period is also referred to as the basic vegetative phase of the plant.

P2O

Critical photoperiod or the longest day length (in hours) at which the development occurs at a maximum rate. At values higher than P2O developmental rate is slowed, hence there is delay due to longer day lengths.

P2R

Extent to which phasic development leading to panicle initiation is delayed (expressed as GDD in oC) for each hour increase in photoperiod above P2O

P5

Time period in GDD (oC) from beginning of grain filling (3 to 4 days after flowering) to physiological maturity with a base temperature of 9oC.

G1

Potential spikelet number coefficient as estimated from the number of spikelets per g of main culm dry weight (less lead blades and sheaths plus spikes) at anthesis). A typical value is 55.

G2

Single grain weight (g) under ideal growing conditions, i.e. nonlimiting light, water, nutrients, and absence of pests and diseases.

G3

Tillering coefficient (scaler value) relative to IR64 cultivar under ideal conditions. A higher tillering cultivar would have coefficient greater than 1.0.

G4

Temperature tolerance coefficient. Usually 1.0 for varieties grown in normal environments. G4 for japonica type rice growing in a warmer environment would be 1.0 or greater. Likewise, the G4 value for indica type rice in very cool environments or season would be less than 1.0.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

221

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

TABLE 17. GENETIC COEFFICIENTS FILE *RICE GENOTYPE COEFFICIENTS ! @VAR# VAR-NAME........ ECO# ! ! IB0001 IR 8 IB0001 IB0002 IR 20 IB0001 IB0003 IR 36 IB0001 IB0004 IR 43 IB0001 IB0005 LABELLE IB0001 IB0006 MARS IB0001 IB0007 NOVA 66 IB0001 IB0008 PETA IB0001 IB0009 STARBONNETT IB0001 IB0010 UPLRI5 IB0001 IB0011 UPLRI7 IB0001 IB0012 IR 58 IB0001 IB0013 SenTaNi (???) IB0001 IB0014 IR 54 IB0001 IB0015 IR 64 IB0001 IB0016 IR 60(Est) IB0001 IB0017 IR 66 IB0001 IB0018 IR 72x IB0001 IB0019 RD 7 (cal.) IB0001 IB0020 RD 23 (cal.) IB0001 IB0021 CICA8 IB0001 IB0022 LOW TEMP.SEN IB0001 IB0023 LOW TEMP.TOL IB0001 IB0024 17 BR11,T.AMAN IB0001 IB0025 18 BR22,T.AMAN IB0001 IB0026 19 BR 3,T.AMAN IB0001 IB0027 20 BR 3,BORO IB0001 IB0029 CPIC8 IB0001 IB0030 LEMONT IB0001 IB0031 RN12 IB0001 IB0032 TW IB0001 IB0115 IR 64 IB0001 IB0116 HEAT SENSITIVE IB0001 IB0118 IR 72 IB0001

FOR

CERES-RICE. (RICER940.CUL)

- RICER940 MODEL P1 1

P2R 2

P5 3

P2O 4

G1 5

G2 6

G3 7

G4 8

880.0 500.0 450.0 720.0 318.0 698.0 389.0 420.0 880.0 620.0 760.0 460.0 320.0 350.0 500.0 490.0 500.0 400.0 603.3 310.3 700.0 400.0 400.0 740.0 650.0 650.0 650.0 380.0 500.0 380.0 360.0 540.0 460.0 560.0

52.0 166.0 149.0 120.0 189.0 134.0 155.0 240.0 164.0 160.0 150.0 5.0 50.0 125.0 160.0 100.0 50.0 100.0 150.0 140.0 120.0 120.0 120.0 180.0 110.0 110.0 90.0 150.0 50.0 50.0 50.0 160.0 5.0 20.0

550.0 500.0 350.0 580.0 550.0 550.0 550.0 550.0 550.0 380.0 450.0 420.0 550.0 520.0 450.0 320.0 490.0 580.0 452.5 370.0 360.0 420.0 420.0 400.0 400.0 420.0 400.0 300.0 300.0 300.0 290.0 490.0 390.0 390.0

12.1 11.2 11.7 10.5 12.8 13.0 11.0 11.3 13.0 11.5 11.7 13.5 10.0 11.5 12.0 11.5 12.5 12.0 11.2 11.2 11.7 12.0 12.0 10.5 12.0 12.0 13.0 12.8 12.8 12.8 12.8 12.0 13.5 13.5

65.0 65.0 68.0 65.0 65.0 65.0 65.0 65.0 65.0 50.0 65.0 60.0 70.0 60.0 60.0 75.0 62.0 76.0 65.0 53.0 60.0 60.0 60.0 55.0 60.0 65.0 65.0 38.0 60.0 40.0 55.0 50.0 62.0 60.0

.0280 .0280 .0230 .0280 .0280 .0280 .0280 .0280 .0280 .0220 .0280 .0250 .0300 .0280 .0250 .0275 .0265 .0230 .0230 .0230 .0270 .0250 .0250 .0250 .0250 .0250 .0250 .0210 .0207 .0199 .0210 .0250 .0250 .0250

1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 0.60 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.10 1.00 1.00

1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 0.80 1.25 0.90 1.00 1.00 1.00 1.00 1.00 1.15 1.00 1.00 1.15 1.00

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

222

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

C R O P S I M - C A S S AVA Table 18 shows an example of the current cultivars defined for cassava. Required genetic coefficients include : DUB1

Duration of branch 1 phase (Biological day* from germination to first branch)

DUBR Duration of branch 2 and greater phases (Biological day* between branches) DESP

Development, sensitivity to photoperiod (h-1) (0=insensitive)

PHCX

Photosynthesis, canopy, maximum rate (g dm/m2 d-1)

S#PE

Stem number per plant at emergence (#)

S#FX

Shoot number per fork, maximum (#)

S#PX

Shoot number per plant, maximum (#)

SWNX Stem weight to node weight ration (fr) L#IS

Leaf number, increase rate, standard (leaves (shoot-1) Biological day*-1)

L#IP

Leaf number, increase period (Biological day* after emergence)

LALX

Leaf area, maximum, (cm2/leaf)

LAXA Leaf area, maximum, age at which reached (Biological day* after emergence) LAL3

Leaf area, 300 days after emergence (cm2/leaf)

LAWS Leaf area to weight ration, standard (cm2/g) LFLI

Leaf life (Day)

__________________________

* Biological days are equivalent to chronological days at the optimum temperature and daylength, and with no water or nutrient limitations.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

223

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

TABLE 18. GENETIC COEFFICIENTS FILE

FOR

CROPSIM-CASSAVA. (CSSIM940.CUL)

*CASSAVA GENOTYPE COEFFICIENTS -CSSIM940 MODEL ! @VAR# VRNAME............ TYPE DUB1 DUBR DESP PHCX S#PE S#FX S#PX SWNX L#IS L#IP LALX LAXA LAL3 LAWS LFLI ! 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 990001 Default 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0001 MCol-1120 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0002 MCol-22 1 44.4 58.8 0 20.0 1.2 3.60 28 .650 0.85 330 300 60 50 180 130 UC0003 MCl-113 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0004 MMex-59 1 41.3 29.4 0 24.0 1.0 2.80 35 .750 1.21 212 450 60 50 250 65 UC0005 Popayan 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0006 MCol-1684 1 14.7 24.8 0 27.5 1.0 2.61 27 .590 0.94 370 220 55 40 270 45 UC0007 MVen-77 1 49.4 42.9 0 27.5 1.0 2.95 25 .760 1.13 353 450 70 35 270 75 UC0008 MPtr-26 1 64.7 50.0 0 27.5 1.0 3.00 20 .708 1.45 294 450 70 50 220 75 UC0009 MCol-638 1 44.4 28.2 0 23.5 1.0 2.95 52 .700 1.10 235 350 60 35 220 80 UC0010 Ceiba 1 32.4 35.3 0 26.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0011 JD2 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0012 MAus-1 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0013 MAus-10 1 14.7 41.2 0.25 25.0 3.0 3.09 50 0.76 1.21 235 240 45 70 350 161 UC0014 MAus-13 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0014 MAus-15 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0016 MAus-19 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0017 MAus-22 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0018 MAus-7 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0019 MAus-8 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0020 MCol-1438 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0021 MCol-1468 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0022 MCol-1501 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0023 MCol-1505 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0024 MCol-1513 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0025 MCol-72 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0026 MMex-11 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0027 TMS-30572 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0028 Nina 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0029 Pata 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0030 SM1-150 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0031 Betawi 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 UC0032 CM-507-37 1 44.1 35.3 0 27.5 1.0 3.00 30 .650 1.21 235 300 60 50 240 70 ! Notes: ! Palta (1984): MMex59,MVen218,MCol1684 are vigorous cultivars; ! MCol72,MCol22,MCol638 are less vigorous. ! CM507-37: hybrid; see El-Sharkaway & Cock (1987). ! TMS 30572 in Gutierrez et al (1987).

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

224

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥

APPENDIX B . IMPLEMENTING PEST DAMAGE In DSSAT v3, the pest damage routines have been implemented only in the CROPGRO models (Batchelor et al., 1993). In order to use the damage routines, the type of damage, as well as the amount of damage, must be input by the user. The damage routines were structured to provide flexibility in collecting damage data. Two different methods can be used to describe damage. In typical farm operations, pest population data can be collected through field scouting, and damage can be computed if pest feeding rates are known. In other instances, the actual amount of damage can be measured. This latter approach is useful when pest populations are difficult to measure, or when the source of damage is unknown. Predefined pest definitions can be used to convert scouting report data on pest populations, or observed damage, into daily damage, which is subsequently applied to the crop model. Predefined damage definitions can be used to convert observed levels of damage into daily damage that is subsequently applied to the crop model. New pest or damage definitions can be developed for a wide range of damage types. Currently, damage can be applied to 21 different plant components in CROPGRO.

PEST DAMAGE METHODOLOGY Twenty one state and/or rate variables, called coupling point (see Table 19), were identified as targets for pest damage. Damage is applied to each coupling point by the coupling point damage variable (or PCPID, described in the following section). There is a unique coupling point damage variable for each coupling point. The user supplies information that is used by the crop model to compute daily damage, which is then applied to the desired coupling point through the coupling point damage variable. Four different types (or variable PCTID, described in the following section) can be defined to describe observed damage data: 1. Daily Absolute Damage rate, 2. Percent Observed Damage, 3. Daily Percent Damage rate, and 4. Daily Absolute Damage rate with pest competition and food preference effects. Table 19 shows the allowable damage types available for each coupling point. The coupling point damage variable (PCPID) contains the amount of damage DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

225

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

TABLE 19. COUPLING POINTS AND DAMAGE TYPES USED THE CROPGRO CROP MODELS.

TO

APPLY DAMAGE

IN

Coupling point

Units1

Available damage types2

Coupling point damage variable

leaf area index leaf mass stem mass root mass root length root length volume small seed number large seed number mature seed number small seed mass large seed mass mature seed mass small shell number large shell number mature shell number small shell mass large shell mass mature shell mass whole plant assimilate necrotic leaf area index

m2 m-2 g m-2 g m-2 g m-2 cm cm-2 cm cm-3 no. m-2 no. m-2 no. m-2 g m-2 g m-2 g m-2 no. m-2 no. m-2 no. m-2 g m-2 g m-2 g m-2 no m-2 g m-2

1,2,3,4 1,2,3,4 1,2,3,4 1,3,4 1,3,4 1,3,4 1,3,4 1,3,4 1,3,4 1,3,4 1,3,4 1,3,4 1,3,4 1,3,4 1,3,4 1,3,4 1,3,4 1,3,4 1,3 1,3

LAD LMD SMD RMD RLF RLV SDNS SDNL SDNM SDMS SDML SDMM SHNS SHNL SHNM SHMS SHML SHMM WPD ASM

cm2 cm-2

1,3

PDLA

1 2

Per unit ground area Where damage type are: (1) Daily Absolute Damage rate, (2) Percent Observed Damage, (3) Daily Percent Damage rate, and (4) Daily Absolute Damage rate with pest competition and food preference effects

(PDCF1) and the damage type descriptor (PCTID) tells CROPGRO how to apply the damage to the coupling point. The type of damage selected depends upon the type of damage data that can be collected. Number 1, ÒAbsolute Daily Damage,Ó is useful when pest population data can be collected. If pest populations and feeding rates are known, daily damage to coupling points can be computed in units of mass per unit area. Number 2, ÒPercent Observed Damage,Ó typically occurs when observations of plant components are compared between some scientific treatment and control. For example, defoliation can occur in one treatment, resulting in a percent difference in leaf mass between a treatment and control. In this case, the source of

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

226

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

damage may not be known; while time series measurements describing the percent reduction between treatment and control is known. Number 3, ÒDaily Percent Damage,Ó rate is useful when damage can be measured as percent on a daily basis. For instance, in a manual defoliation study, 33 percent and 66 percent defoliation may be applied on a particular day during the season. In this case, damage is applied as a percent daily damage. Another example would be the application of a shade cloth that blocks 80 percent of incoming light, resulting in an 80 percent reduction in daily assimilate production during the period of shading. Number 4, ÒDaily Absolute DamageÓ rate is intended to be used for insects that compete for feeding sites. If insect demand for the primary food source is high relative to supply, some damage is partitioned to secondary food sources.

P E S T D A M A G E D ATA F I L E S Two data files are used to define the pest linkage. A field-specific record of observed pest or pest damage levels is contained in the time series file (FILET) associated with each experiment. A typical FILET with recorded pest populations is shown in Table 20. Each column has a 4 character header that is unique for each pest (the PID variable, described below). The first two columns in this file contain the treatment number and observation date. The measured level of pest and/or damage is input in a column containing a 4 character header abbreviation for the pest or damage. This approach for recording observed pest and damage levels follows a typical field scouting record format. The steps required to define a pest progress file are as follows. 1. Put a header in the header column of FILET that matches the pest identifier (PID; see Tables 21-23 for dry bean, peanut and soybean, respectively) for the pest defined in the pest coefficient file. 2. Input the year and day of year in the first two columns of FILET for pest observation dates. 3. Input population level or damage level in FILET in the pest column corresponding to the observation date. Observed pest and damage reported in the pest progress file (FILET) must have a corresponding definition in the pest coefficient file (*.PST). This crop-specific pest coefficient file defines individual pests or damage in terms of coupling points and feeding rates. Feeding rate coefficients, which have designated units, provide a means of converting from pest population to damage to coupling points. The pest coefficient files, distributed with the CROPGRO model for dry bean, peanut, and soybean are shown in Tables 21-23. DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

227

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

The following columns are included in these pest coefficient files. 1st column: pest number (LN); 2nd column: pest identifier (PID); 3rd column: pest name (PNAME); 4th column: damage characterization type (PCTID); 5th column: coupling point identifier (PCPID), defined in Table 19; 6th column: feeding rate coefficient (PDCF1); 7th column: additional coefficient (PDCF2, currently not implemented. 8th column: units of the feeding rate coefficient (Units); and 9th column: source for damage rates (Source). To add a new pest or damage type to the pest coefficient file, the user must contact the model developer (see Appendix D of this Part).

TABLE 20. TYPICAL TIME SERIES FILE (FILET) CONTAINING EXAMPLES PROGRESS DATA FOR SIX PEST AND DAMAGE TYPES1 FOR SOYBEAN.

OF

PEST

*EXP.DATA (T): UFBI9101SB Drew field drought study @TRNO 1 1 1 1 1 1 1 1

DATE 91147 91154 91161 91168 91175 91181 91188 91195

CEW6 0.0 0.5 0.9 1.5 0.2 0.0 -99 -99

SL6 1.5 2.8 3.3 6.4 0.5 1.2 1.5 3.3

VC5 0.25 0.25 0.1 0.0 0.0 0.0 -99 -99

VC6 0.4 0.6 1.2 1.6 1.8 1.0 0.2 0.0

SHAD 30.0 30.0 0.0 -99 -99 -99 -99 -99

GC5 0.0 0.6 0.1 0.0 0.0 0.0 0.0 0.0

1 The pest names defined by these pest header are: CEW6 - 6th instar corn earworm; SL6 - 6th instar soybean looper; VC5- 5th instar velvetbean caterpillar; VC6 - 6th instar velvetbean caterpillar; SHAD - percent canopy shading by shade cloth; and GC5 - 5th instar green cloverworm. Each pest and damage is defined in the pest coefficient file.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

228

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

TABLE 21. A TYPICAL PEST COEFFICIENT FILE LN PID

PNAME

PCTID PCPID PDCF1

01 EMP Empoasca kramerii

4 SDNS SDNL LAD 02 APN2 4 Instar Apion 1 SDNS 1 SDNL 03 APN4 4 Instar Apion 1 SDNS 1 SDNL 04 HL2 Heliothis 1 SDNS 05 HL4 Heliothis 1 SDNS 06 HL6 Heliothis 1 SDNS 07 EPN Epinotia 4 SDNS SDNM 08 WFL Bemisia (white fly) 1 LMD 09 BSM Bean stem maggot 1 RLV 10 PCLA Obs.% defoliation 2 LAD 11 PSTM Obs.% Stem damage 2 SMD 12 PDLA % Diseased Leaf Area 3 PDLA 13 PRP % Reduction in Photo 3 ASM 14 PLAI % daily LAI dest. 3 LAD 15 PLM % daily Leaf Mass 3 LMD 16 PWP % Whole Plants 3 WPD 17 PSDN % All Seed Dest. 3 SDNL SDNS SDNM 18 PSHN % All Shell Dest. 3 SHNL SHNS SHNM 19 PPDN % All Pod Dest. 3 PPDN 20 PRTM % Root mass dest. 3 RMD

10.0000000 2.50000000 0.00505000 10.0000000 2.50000000 10.0000000 2.50000000 10.0000000 10.0000000 10.0000000 15.0000000 5.00000000 2.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000

FOR

DRY BEAN. (BNGRO940.PST)

PFCF2 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000

Units

Source

no./larva/d no./larva/d m2/larva/d no./larva/d no./larva/d no./larva/d no./larva/d no./larva/d no./larva/d no./larva/d no./m2/d no./m2/d g/larva/day cm/cm2/lar/d % % %/day %/day %/day %/day %/day %/day %/day %/day %/day %/day %/day %/day %/day

estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

229

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

TABLE 22. A TYPICAL PEST COEFFICIENT FILE LN 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16

PID1 CEW6 VBC5 VBC6 SL4 SL5 SL6 FAW RTWM PCLA PSTM PDLA PRP PLAI PLM PWP PSDN

PNAME

PCTID PCPID PDCF1

Corn Earworm2 5 Instar Velvetbean3 6 Instar Velvetbean Soybean Looper4 Soybean Looper Soybean Looper Fall Armyworm rootworm Obs.% defoliation Obs.% Stem damage % Diseased Leaf Area % Reduction in Photo % daily LAI dest. % daily Leaf Mass % Whole Plants % All Seed Dest.

17 PSHN

% All Shell Dest.

18 PPDN 19 PRTM

% All Pod Dest. % Root mass dest.

1 2 3 4

1 1 1 1 1 1 1 1 2 2 3 3 3 3 3 3

LAD LAD LAD LAD LAD LAD LMD RLV LAD SMD PDLA ASM LAD LMD WPD SDNL SDNS SDNM 3 SHNL SHNS SHNM 3 PPDN 3 RMD

0.00505000 0.00081000 0.00144000 0.00044000 0.00071000 0.00124000 2.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000

FOR

PEANUT. (PNGRO940.PST)

PFCF2 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000

Units

Source

m2/larva/d Szmedra et al. m2/larva/d Reid, 1975 m2/larva/d Reid, 1975 m2/larva/d Reid and Green m2/larva/d Reid and Green m2/larva/d Reid and Green g/larva/d estimated cm/cm2/lar/d estimated % estimated % estimated %/day estimated %/day estimated %/day estimated %/day estimated %/day estimated %/day estimated %/day estimated %/day estimated %/day estimated %/day estimated %/day estimated %/day estimated %/day estimated

1988

1975 1975 1975

Pest identifier or abbreviation for the pest or damage type. Corn Earworm (Heliothis Zea.) Velvetbean Caterpillar (Anticarsia gemmatalis) Soybean Looper (Pseudoplusia includens)

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

230

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

TABLE 23. A TYPICAL PEST COEFFICIENT FILE LN PID1

PNAME

PCTID PCPID PDCF1

01 CEW6 Corn Earworm2

02 03 04 05 06 07

VBC5 VBC6 SL4 SL5 SL6 SGSB

5 Instar Velvetbean3 6 Instar Velvetbean Soybean Looper4 Soybean Looper Soybean Looper Stinkbug5

08 09 10 11 12 13 14 15 16 17

FAW RTWM PCLA PSTM PDLA PRP PLAI PLM PWP PSDN

Fall Armyworm rootworm Obs.% defoliation Obs.% Stem damage % Diseased Leaf Area % Reduction in Photo % daily LAI dest. % daily Leaf Mass % Whole Plants % All Seed Dest.

18 PSHN % All Shell Dest.

19 PPDN % All Pod Dest. 20 PRTM % Root mass dest.

1 2 3 4 5

4 SDNS SDNL LAD 1 LAD 1 LAD 1 LAD 1 LAD 1 LAD 4 SDNS SDNM 1 LMD 1 RLV 2 LAD 2 SMD 3 PDLA 3 ASM 3 LAD 3 LMD 3 WPD 3 SDNL SDNS SDNM 3 SHNL SHNS SHNM 3 PPDN 3 RMD

10.0000000 2.50000000 0.00505000 0.00081000 0.00144000 0.00044000 0.00071000 0.00124000 15.0000000 5.00000000 2.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000 1.00000000

FOR

PFCF2 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000

SOYBEAN. (SBGRO940.PST) Units

Source

no./larva/d no./larva/d m2/larva/d m2/larva/d m2/larva/d m2/larva/d m2/larva/d m2/larva/d no./m2/d no./m2/d g/larva/day cm/cm2/lar/d % % %/day %/day %/day %/day %/day %/day %/day %/day %/day %/day %/day %/day %/day

Batchelor et al.1989 Szmedra et al. 1988 Szmedra et al. 1988 Reid, 1975 Reid, 1975 Reid and Green 1975 Reid and Green 1975 Reid and Green 1975 Batchelor et al. 1989 Batchelor et al. 1989 estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated estimated

Pest identifier or abbreviation for the pest or damage type. Corn Earworm (Heliothis Zea.) Velvetbean Caterpillar (Anticarsia gemmatalis) Soybean Looper (Pseudoplusia includens) Southern Green Stinkbug (Nezara virdula L.)

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

231

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

E X A M P L E S O F P E S T D ATA F I L E S EXPERIMENTS EXAMPLE 1 (CORN EARWORM DAMAGE

IN

FOR

VA R I O U S

SOYBEAN)

In this example, damage resulting from 6th instar corn earworm (PID = CEW6) was applied to both irrigated and non-irrigated treatments in the soybean experiment UFGA7802.SBX. In the experiment, treatments 1 and 2 contained irrigated and non-irrigated Bragg soybean without pest damage. In treatments 3 and 4, pest damage due to observed levels of corn earworm was applied to the irrigated and non-irrigated treatments. It was assumed that the CEW6 population was measured through periodic field scouting, which resulted in the scouting report shown in Table 24. In order to apply the pest damage in the model, the following steps were followed: 1. Checked to ensure that the pest was defined in the pest coefficient file (SBGRO940.PST) (see Table 23); 2. Entered the observed population levels in FILET (UFGA7802.SBT); and 3. Set the PEST damage option to ÔYÕ in FILEX (UFGA7802.SBX). The steps described in the preceding section, ÒPest Damage Data FilesÓ were followed to add the pest population observations to FILET. As part of Step 2, a column was added in FILET, UFGA7802.SBT, using a text editor, containing the CEW6 header for corn earworm (or the PID) (see Table 25). The CEW6 header in TABLE 24. CORN EARWORM POPULATION DATA COLLECTED SCOUTING FOR THE SOYBEAN EXPERIMENT UFGA7802. Day of year 222 229 236 243 250 257 264 271 278 285 292

FROM

FIELD

Corn earworm population, no. m-2 0.0 0.5 1.0 2.5 5.5 11.1 14.1 13.1 0.5 0.8 0.9

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

232

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥

TABLE 25. TIME SERIES FILE FOR THE SOYBEAN EXPERIMENT UFGA7802 SHOWING 6TH INSTAR CORN EARWORM POPULATION LEVELS (CEW6). *EXP.DATA (T): UFGA7802SB BRAGG, IRR*INSECT DAMAGE @TRNO 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DATE 78194 78201 78208 78215 78222 78229 78236 78243 78250 78257 78264 78271 78278 78285 78292

LAID .89 1.28 1.91 2.86 4.17 3.90 4.66 4.47 4.44 3.99 4.67 2.83 2.09 .47 .09

SWAD 178 300 551 943 1561 1956 2947 3144 3303 3326 3657 2732 2515 1851 2064

GWAD LWAD 0. 266 0. 366 0. 656 0. 843 0. 1187 0. 1204 0. 1723 0. 1772 182 1631 754 1568 1912 1769 2223 1180 2730 858.0 2913 170.0 3169 34.0

CWAD 444 667 1207 1786 2748 3160 4792 5224 5740 6507 8586 7144 7136 5866 6270

PWAD 0. 0. 0. 0. 0. 0. 123 308 805 1613 3161 3232 3763 3845 4172

SHAD 0. 0. 0. 0. 0. 0. 123 308 623 859 1249 1009 1033 932 1003

SH%D 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 22.60 46.75 60.49 68.78 72.55 75.76 75.96

SLAD 334.6 349.7 291.2 339.3 351.3 323.9 270.5 252.3 272.2 254.5 264.0 239.8 243.6 276.5 264.7

HIAD 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.030 0.116 0.222 0.311 0.383 0.497 0.505

CEW6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

78194 78201 78208 78215 78222 78229 78236 78243 78250 78257 78264 78271 78278 78285 78292

.75 1.08 1.81 3.29 4.38 4.30 4.21 4.50 2.09 3.24 2.30 1.14 .85 .53 .07

160 251 535 1080 1663 2083 2556 2673 1998 2650 2609 2113 1905 1922 1590

0. 0. 0. 0. 0. 0. 0. 0. 42 253 471 775 782 1149 1206

244 311 626 974 1261 1392 1517 1439 838 1220 931 498 371 236 30

405 563 1161 2054 2923 3475 4184 4431 3104 4530 4440 3812 3398 3732 3250

0. 0. 0. 0. 0. 0. 112 319 268 661 901 1200 1122 1574 1630

0. 0. 0. 0. 0. 0. 112 319 226 408 430 425 340 425 424

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 15.67 38.28 52.28 64.58 69.70 73.00 73.99

307.4 347.3 289.1 337.8 347.3 308.9 277.5 312.7 249.4 265.6 247.0 228.9 229.1 224.5 233.3

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.014 0.056 0.106 0.203 0.230 0.308 0.371

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

78194 78201 78208 78215 78222 78229 78236 78243 78250 78257 78264 78271 78278 78285 78292

.89 1.28 1.91 2.86 4.17 3.90 4.66 4.47 4.44 3.99 4.67 2.83 2.09 .47 .09

178 300 551 943 1561 1956 2947 3144 3303 3326 3657 2732 2515 1851 2064

0. 0. 0. 0. 0. 0. 0. 0. 182 754 1912 2223 2730 2913 3169

266 366 656 843 1187 1204 1723 1772 1631 1568 1769 1180 858 170 34

444 667 1207 1786 2748 3160 4792 5224 5740 6507 8586 7144 7136 5866 6270

0. 0. 0. 0. 0. 0. 123 308 805 1613 3161 3232 3763 3845 4172

0. 0. 0. 0. 0. 0. 123 308 623 859 1249 1009 1033 932 1003

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 22.60 46.75 60.49 68.78 72.55 75.76 75.96

334.6 349.7 291.2 339.3 351.3 323.9 270.5 252.3 272.2 254.5 264.0 239.8 243.6 276.5 264.7

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.030 0.116 0.222 0.311 0.383 0.497 0.505

0.0 0.0 0.0 0.0 0.0 0.5 1.0 2.5 5.5 11.1 14.1 13.1 0.5 0.8 0.9

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

233

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

FILET must match the unique 4 character pest identifier (PID) for corn earworm in the pest coefficient file, SBGRO940.PST (see Table 23). This file is in used by the model to match the pest population with the pest coefficients. The header must be left-justified in the columns in FILET as described in Volume 2-1 (Jones et al. 1994) of this book for FILET formats. Next, the observed population levels were placed in UFGA7802.SBT (Table 25). (Note that the populations were entered in treatments 3 and 4. During the simulation, daily populations are linearly interpolated between observations entered in this file.) Finally, the DISES option was set to ÔYÕ and the pest output was turned on ((DIOUT = ÔYÕ) in the Simulation Controls section of UFGA7802.SBX, as shown in Table 26.

TABLE 26. SIMULATION CONTROL SECTION OF FILE UFGA7802.SBX SHOWING THE DISEASE SIMULATION OPTION (DISES) SET TO ‘Y’ TO ENABLE PEST DAMAGE SIMULATION. *SIMULATION CONTROLS @N GENERAL NYERS 1 GE 1 @N OPTIONS WATER 1 OP Y @N METHODS WTHER 1 ME M @N MANAGEMENT PLANT 1 MA R @N OUTPUTS FNAME 1 OU N

NREPS 1 NITRO Y INCON M IRRIG R OVVEW Y

START S SYMBI Y LIGHT E FERTI R SUMRY Y

YRDAY 78166 PHOSP N EVAPO R RESID R FROPT 3

RSEED 2150 POTAS N INFIL S HARVS M GROUT Y

SNAME.................... BRAGG, IRRIGATED & NON-IR DISES Y PHOTO C

CAOUT WAOUT NIOUT MIOUT DIOUT Y Y Y N Y

LONG Y

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

234

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

EXAMPLE 2 (VELVETBEAN CATERPILLAR DEFOLIATION DAMAGE

IN

SOYBEAN)

The experiment UFQU7902 contained two soybean treatments. An insecticide was used in the control treatment and a second treatment was not sprayed. Periodic measurements of leaf area index showed severe defoliation due to velvetbean caterpillar larva occurred in the untreated treatment. In this experiment, pest population data were not collected; however, percent defoliation measured for the damaged treatment is shown in Table 27. In this experiment, defoliation can be simulated by specifying the percent observed defoliation over time. To simulate damage, the following steps were taken: 1. Checked to ensure that the pest was defined in the pest coefficient file (SBGRO940.PST) (see Table 23); 2. Entered the observed defoliation in FILET (UFQU7902.SBT); and 3. Set the PEST damage option to ÔYÕ in FILEX (UFQU7902.SBX). The steps described in the section, ÒPest Damage Data Files,Ó were followed to add the pest observations to FILET. The PID for percent cumulative leaf area damage is PCLA. The PCPID was leaf area index, indicated by the CROPGRO leaf area index damage variable, LAD (Table 19). The PCTID selected was Ò2,Ó which indicates that damage will be entered in FILET as observed defoliation. The crop model will compute the daily damage required to obtain this level of defoliation on the observation dates. The damage coefficient is 1.0, so that the TABLE 27. PERCENT DEFOLIATION MEASURED AT DIFFERENT OBSERVATION DATES FOR THE SOYBEAN EXPERIMENT UFQU7902. DEFOLIATION OCCURRED DUE TO VELVETBEAN CATERPILLAR POPULATION; HOWEVER, THE POPULATION LEVEL WAS UNKNOWN. Day of year 241 248 255 262 271 276 283 288 292 295 303

Observed defoliation, 0.0 22.6 56.1 50.0 52.5 57.1 57.9 61.7 53.3 71.4 100.0

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

235

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

damage recorded in FILET will be directly applied to one or more variables in the model. This means that these variables in the model are proportionally reduced by the same percent as entered for these coefficients in FILET. When a damage type, such as this one, is defined, direct measures of damage are typically recorded in the time series file and the damage coefficient is set to 1.0. A column with the header PCLA was entered in the time series file UFQU7902.SBT. Percent damage on each observation date was entered for treatment 2 as shown in Table 28. The crop model linearly interpolates between observations to obtain daily levels of observed damage. An entry of Ò-99Ó indicates that data were not available. Thus, CROPGRO skips that entry for linear interpolation of daily damage. Finally, the DISES variable in the Simulation Controls section of UFQU7902.SBX was set to ÔYÕ as shown in Table 26.

TABLE 28. TIME SERIES DATA FILE FOR THE SOYBEAN EXPERIMENT UFQU7902 SHOWING OBSERVED DEFOLIATION LEVELS (PCLA) RESULTING FROM VELVETBEAN CATERPILLAR DAMAGE. *EXP.DATA (T): UFQU7902SB BRAGG, WELL IRRIGATED

(defoliation)

@TRNO 1 1 1 1 1 1 1 1 1 1 1 1

DATE 79234 79241 79248 79255 79262 79271 79276 79283 79288 79292 79295 79303

LAID 4.15 5.48 5.53 5.54 5.32 4.04 4.25 3.92 3.85 1.36 0.54 0.47

SWAD 1945 2650 3075 3509 3435 3362 3103 3754 3601 2633 2084 2388

GWAD 0 0 60 303 777 1319 1943 2635 3313 3039 3896 3541

LWAD 1214 1659 1925 1718 1866 1481 1540 1659 1600 592 148 140

CWAD 3228 4455 5491 6755 7395 7351 7635 9372 9957 7578 7666 7345

PWAD 0 132 566 1357 1988 2509 3013 4039 4883 4267 5406 4763

SHAD 0 132 506 1054 1211 1190 1070 1404 1570 1228 1510 1222

SH%D 0.00 0.00 10.60 15.24 39.08 48.59 64.49 65.24 67.85 71.22 72.07 74.34

2 2 2 2 2 2 2 2 2 2 2 2 2 2

79234 79241 79248 79255 79262 79271 79276 79283 79288 79292 79295 79303 79304 79305

5.00 5.20 4.10 2.50 2.70 1.90 1.80 1.50 1.30 0.70 0.20 0.00 0.00 0.00

-99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99

0 0 0 300 700 1000 1600 2100 2300 2400 3000 -99 -99 -99

1540 1540 1600 1096 1185 859 948 740 592 266 88 0. 0. 0.

-99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99

0. 100 600 1200 1800 1950 2500 3200 3600 3400 4200 -99 -99 -99

-99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99

-99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99

SLAD 323.5 327.6 298.8 293.4 269.8 272.4 279.8 248.3 261.2 200.6 243.2 241.0

PCLA -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99

-99 0.0 -99 0.0 -99 22.6 -99 56.1 -99 50.0 -99 52.5 -99 57.1 -99 57.9 -99 65.7 -99 75.3 -99 85.4 -99 100.0 -99 100.0 -99 100.0

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

236



Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

EXAMPLE 3 (LEAFSPOT DISEASE

IN

PEANUT)

In this third example, an experiment was conducted to determine the effect of late leafspot on peanut pod yield. In the control treatment, a fungicide was sprayed following extension guidelines to obtain good control of leafspot disease throughout the growing season. In the second treatment, no leafspot control measures were taken. Observed defoliation between the control and disease treatments were taken periodically throughout the growing season. Percent diseased leaf area was also measured on each treatment. Defoliation and percent diseased leaf area for the disease treatment were recorded as shown in Table 29. As in the previous examples, the following steps were taken to link this damage to the crop model: 1. Checked to ensure that the pest was defined in the pest coefficient file (PNGRO940.PST) (see Table 22); 2. Entered observed defoliation and percent diseased leaf area in FILET (UFGA8602.PNT); and 3. Set PEST damage option to ÔYÕ in FILEX (UFGA8602.PNX).

TABLE 29. OBSERVED PERCENT DEFOLIATION AND PERCENT DISEASED LEAF AREA COLLECTED FROM FIELD SCOUTING FOR THE PEANUT EXPERIMENT UFGA8602.

Days after planting(DAP)

218 230 232 238 246 254 260 266 274 280 288 294 302

Percent observed defoliation (PCLA)

0.0 0.0 4.8 17.3 25.5 26.0 28.0 29.5 31.2 32.0 30.5 29.0 -99

Percent diseased leaf area (PDLA)

0.0 0.25 0.28 1.49 41.3 58.8 56.5 75.7 90.1 88.5 99.1 98.6 100.0

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

237

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

The steps described in the section, ÒPest Damage Data Files,Ó were followed to add the pest observations to FILET. The PID for this damage is PDLA (see Table 22). The associated coupling point damage variable (PCPID) is also PDLA, which reduces healthy leaf area in the crop model (Table 19), and subsequently photosynthetic capacity. The damage characterization type (PCTID) is Ò3Ó since diseased leaf area is described as a percent per day. After the two damage types were confirmed defined in the pest coefficient file (PNGRO940.PST; Table 22), the observed levels of damage were input in the time series file, UFGA8602.PNT, in columns corresponding to the four character pest identification codes PCLA and PDLA (Table 30). Daily values of damage will be generated by the model through linearly interpolating between observations. Finally, the DISES variable in the Simulation Controls section of UFGA8602.PNX was set to ÔYÕ to simulate pest damage in the same manner as shown in Table 26.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

238

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

TABLE 30. TIME SERIES FILE FOR THE PEANUT EXPERIMENT UFGA8602 SHOWING OBSERVED LEVELS OF DEFOLIATION (PCLA) AND DISEASED LEAF AREA (PDLA) DUE TO LEAFSPOT DISEASE. *EXP.DATA (T): UFGA8602PN RAINFED, FLORUNNER,GOOD DISEASE CONTROL @TRNO 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DATE 86176 86190 86204 86211 86218 86230 86232 86238 86246 86254 86260 86266 86274 86280 86288 86294 86302

L#SD PCLA PDLA LAID P#AD SWAD GWAD LWAD CWAD PWAD ATPW 0. 7.4 0.0 0.0 0.29 0. 85. 0. 137. 222. 0. 0. 10.6 0.0 0.0 1.14 0. 397. 0. 492. 889. 0. 13. 14.8 0.0 0.0 2.48 19. 1332. 0. 1164. 2509. 13. 67. 15.6 0.0 0.0 3.16 32. 1714. 0. 1526. 3306. 67. 17.1 0.0 0.0 5.52 226. 3049. 56. 2248. 5545. 248. 248. 21.0 0.0 0.0 5.64 273. 3411. 264. 2440. 6528. 678. 678. 21.8 0.0 0.0 6.50 461. 4052. 486. 2640. 7683. 990. 990. 23.3 0.0 0.0 7.34 468. 4696. 900. 3153. 9322. 1474. 1474. 25.0 0.0 0.02 7.55 630. 4572. 1449. 3078. 9812. 2162. 2162. 26.5 0.0 0.0 7.75 797. 5073. 2375. 3457. 11958 3429. 3429. 28.8 0.0 0.08 6.85 583. 4548. 2477. 2966. 10896 3381. 3381. 27.0 0.0 0.01 8.06 860. 5568. 3492. 3640. 13850 4642. 4642. 29.0 0.0 0.06 6.75 694. 4764. 3343. 2903. 12108 4450. 4440. 28.0 0.0 0.07 4.53 602. 5076. 4168. 2030. 12512 5416. 5405. 29.8 0.0 0.13 4.67 794. 5438. 4413. 2223. 13189 5687. 5528. 31.5 0.0 0.57 4.85 640. 5330. 4289. 2644. 13477 5683. 5503. 30.5 0.0 0.15 4.57 604. 5667. 4638. 2342. 13748 6190. 5739.

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

86176 86190 86204 86211 86218 86230 86232 86238 86246 86254 86260 86266 86274 86280 86288 86294 86302

7.6 10.8 14.3 15.6 16.8 21.7 21.8 23.7 25.5 26.0 28.0 29.5 31.2 32.0 30.5 29.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0 4.8 17.3 41.3 58.8 56.5 75.7 90.1 88.5 99.1 98.6 100.0

0.0 0.0 0.0 0.0 0.0 0.25 0.28 1.49 4.22 5.05 4.77 4.15 4.88 9.17 7.89 0.0 0.0

0.29 1.14 2.45 4.03 5.28 6.18 6.02 5.94 4.24 2.34 2.10 1.75 0.52 0.40 0.04 0.04 0.00

0. 0. 12. 247. 224. 378. 365. 549. 552. 627. 564. 786. 454. 706. 394. 342. 17.

85. 397. 1366. 1940. 2933. 3767. 3832. 4106. 4616. 4872. 4161. 5448. 3732. 3804. 3473. 3241. 3087.

0. 0. 0. 0. 33. 436. 419. 915. 1438. 1933. 2588. 2973. 2921. 3477. 2300. 2195. 111.

137. 492. 1165. 1662. 2253. 2513. 2503. 2608. 1807. 1076. 995. 886. 270. 234. 19. 36. 0.

222. 889. 2538. 3692. 5421. 7217. 7229. 8269. 8438. 8486. 8568. 10224 7664. 8355. 6258. 5926. 3223.

0. 0. 7. 90. 235. 937. 895. 1554. 2015. 2538. 3412. 3890. 3718. 4409. 3876. 4439. 2538.

DTPW 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 10. 11. 159. 180. 451.

SHAD 0. 0. 13. 67. 192. 414. 504. 574. 713. 1054. 904. 1150. 1097. 1237. 1115. 1214. 1101.

G#AD 0.0 0.0 0.0 0.0 67.5 197.1 331.6 400.8 519.3 684.2 724.2 868.8 760.0 833.8 869.9 808.4 881.0

HIPD 0.000 0.000 0.005 0.020 0.045 0.104 0.129 0.158 0.220 0.287 0.310 0.335 0.367 0.432 0.419 0.408 0.417

SH%D 0.0 0.0 0.0 0.0 20.7 36.1 48.8 60.6 67.0 69.3 73.0 75.6 75.2 77.1 79.6 77.9 80.8

SLAD 215. 231. 213. 209. 246. 231. 246. 232. 246. 225. 231. 221. 232. 223. 210. 183. 196.

GWGD 0.0 0.0 0.0 0.0 83.0 133.9 146.6 224.6 279.0 347.1 342.0 401.9 439.9 499.9 507.3 530.6 526.4

0. 0. 0. 0.0 0. 0. 0. 0.0 7. 0. 7. 0.0 90. 0. 90. 0.0 235. 0. 232. 37.0 937. 0. 501. 281.0 895. 0. 475. 293.6 1554. 0. 639. 431.8 2015. 0. 577. 487.3 2538. 0. 605. 523.2 3412. 0. 824. 646.7 3890. 0. 917. 705.4 3662. 56. 741. 588.1 4316. 93. 839. 741.2 2766. 1110. 466. 441.0 2649. 1790. 454. 404.5 136. 2402. 25. 22.9

0.000 0.000 0.003 0.024 0.043 0.130 0.124 0.188 0.239 0.299 0.398 0.380 0.478 0.516 0.442 0.447 0.042

0.0 0.0 0.0 0.0 12.8 45.0 46.4 59.0 71.0 76.2 75.8 76.5 79.6 80.7 83.2 82.8 62.0

215. 231. 211. 243. 235. 245. 241. 228. 235. 218. 211. 197. 190. 173. 188. 94. 0.

0.0 0.0 0.0 0.0 89.2 155.2 142.7 211.9 295.1 369.4 400.2 421.5 496.7 469.1 521.5 542.6 484.7

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

239

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

240

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

APPENDIX C . RUNNING MODELS UNDER THE DSSAT V 3 SHELL AND AS STAND - ALONE EXECUTABLES RUNNING UNDER

THE

D S S AT

V3

SHELL

When running the models under the DSSAT v3 Shell (see Volume 1-3, Hunt et al. 1994, of this book, for a description of the Shell), the location of the various files are obtained from a file-locator file in the DSSAT v3 directory named DSSATPRO.FLE (see the Appendix to Volume 1 for a listing of this file). Each crop model is designed to first check the local directory (from where the model is run) for input files. If it does not find them in the local path, the model modules will open the DSSATPRO.FLE file to find the path of soil, weather, and crop coefficient files. Table 31 lists the various modules and files required for running the crop models and the default paths for running them under DSSAT the DSSAT v3 Shell. Note, however, that DSSAT v3 users can change these paths through the SETUP menu found under the DSSATv3 Shell (Volume 1-3, Hunt et al. 1994). TABLE 31. SUGGESTED ORGANIZATION OF FILES FOR EXECUTION UNDER THE DSSAT V3 SHELL, USING CROPGRO-SOYBEAN AS

AN

Path

Module or File Type

File Name

C:\DSSAT3 C:\DSSAT3 C:\DSSAT3 C:\DSSAT3 C:\DSSAT3 C:\DSSAT3 C:\DSSAT3\GENOTYPE C:\DSSAT3\GENOTYPE C:\DSSAT3\GENOTYPE C:\DSSAT3\SOIL C:\DSSAT3\WEATHER C:\DSSAT3\SOYBEAN C:\DSSAT3\SOYBEAN C:\DSSAT3\SOYBEAN C:\DSSAT3\SOYBEAN C:\DSSAT3\SOYBEAN C:\DSSAT3\SOYBEAN

Model Driver Module Model Input Module Model Executable Module Graphic Program Variable Definition File File Containing Paths Crop Cultivar Coefficient File Crop Species Coefficient File Crop Ecotype Coefficient File Soil Data File Weather Data Files Management Inputs (FILEXs) Observed Field Data (Averages) Observed Field Data (Seasonal) List of Experiments List of Available Weather Data Model Output Files

MDRIV940.EXE MINPT940.EXE CRGRO940.EXE WINGRAF.EXE DATA.CDE DSSATPRO.FLE SBGRO940.CUL SBGRO940.SPE SBGRO940.ECO SOIL.SOL UFGA7801.WTH UFGA7801.SBX UFGA7801.SBA UFGA7801.SBT EXP.LST WTH.LST GROWTH.OUT, etc.

OF

CROP MODELS EXAMPLE.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

241

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

RUNNING

AS

S TA N D - A L O N E E X E C U TA B L E S

When running the DSSAT v3 crop models in stand-alone mode, all input and output data files are stored in one directory on a disk, and the executable modules are stored in a separate disk directory. One could also combine all executables with the input and output data. Table 32 lists the different files needed to run the crop models in a stand-alone mode and a suggested path structure. The example files are listed for soybean using the CROPGRO module, however a similar structure could be used for other models.

TABLE 32. SUGGESTED ORGANIZATION OF FILES FOR STAND-ALONE EXECUTION CROP MODELS, USING CROPGRO-SOYBEAN AS AN EXAMPLE.

OF

Path

Module or File Type

File Name

C:\CROPGRO C:\CROPGRO C:\CROPGRO C:\CROPGRO C:\CROPGRO C:\CROPGRO C:\CROPGRO

Model Driver Module Model Input Module Model Executable Module Graphic Program Variable Definition File Batch File to Run Crop Model Batch File to Run Graphics

MDRIV940.EXE MINPT940.EXE CRGRO940.EXE WINGRAF.EXE DATA.CDE GRO.BAT GRAPH.BAT

C:\CROPGRO\SOYBEAN C:\CROPGRO\SOYBEAN C:\CROPGRO\SOYBEAN C:\CROPGRO\SOYBEAN C:\CROPGRO\SOYBEAN C:\CROPGRO\SOYBEAN C:\CROPGRO\SOYBEAN C:\CROPGRO\SOYBEAN C:\CROPGRO\SOYBEAN C:\CROPGRO\SOYBEAN C:\CROPGRO\SOYBEAN

Soil Data File Weather Data Files Management Inputs (FILEXs) Observed Field Data (Averages) Observed Field Data (Seasonal) List of Experiments List of Available Weather Data Crop Cultivar Coefficient File Crop Species Coefficient File Crop Ecotype Coefficient File Model Output Files

SOIL.SOL UFGA7801.WTH UFGA7801.SBX UFGA7801.SBA UFGA7801.SBT EXP.LST WTH.LST SBGRO940.CUL SBGRO940.SPE SBGRO940.ECO GROWTH.OUT, etc.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

242

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop

APPENDIX D . CONTACTS FOR CROP MODEL INFORMATION CROP MODEL DRIVER PROGRAM

AND

CROP MODEL INPUTS

DR. G. HOOGENBOOM

Dept. of Biological and Agricultural Engineering Georgia Station University of Georgia Griffin, GA 30223-1797, USA Phone: 1-404-228-7216 Fax: 1-404-228-7218 E-mail: [email protected]

C E R E S – B A R L E Y , M A I Z E , M I L L E T , W H E AT , S O R G H U M DR. P.W. WILKENS

Research and Development Division International Fertilizer Development Center P.O. Box 2040 Muscle Shoals, AL. 35662, USA Phone: 1-205-381-6600 Fax: 1-205-381-7408 E-mail: [email protected]

CERES–RICE DR. U. SINGH

Research and Development Division International Fertilizer Development Center P.O. Box 2070 Muscle Shoals, AL. 35662, USA Phone: 1-205-381-6600 Fax: 1-205-381-7408

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume

243

Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models ¥ Crop Models

CROPGRO–DRY BEAN DR. G. HOOGENBOOM DR. J.W. WHITE

OR

Centro Internacional de Agricultura Tropical Apartado Aereo 6713 Cali,COLOMBIA E-mail: [email protected]

CROPGRO–PEANUT DR. K.J. BOOTE

Department of Agronomy University of Florida Gainesville, FL 32611, USA Phone: 1-904-392-8535 Fax: 1-904-392-4092 or Dr. G. Hoogenboom

CROPGRO–SOYBEAN DR. J.W. JONES

Department of Agricultural Engineering University of Florida Gainesville, FL 32611, USA Phone: 1-904-392-8694 Fax: 1-904-392-4092 E-mail: [email protected] or Drs. G. Hoogenboom and K. J. Boote

C R O P S I M – C A S S AVA DR. L.A. HUNT OR DR. R. MATTHEWS

Department of Crop Science University of Guelph Guelph, Ontario, NIG 2W1, CANADA Phone: 1-519-824-4120 Fax: 1-519-763-8933 E-mail: [email protected]

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, V

244

VOLUME 2-3

GRAPHING SIMULATED & EXPERIMENT DATA

H. CHAN, P. W. W I L K E N S , G. HOOGENBOOM, J . W. J O N E S , D.C. GODWIN

UNIVERSITY

OF HAWAII, INTERNATIONAL FERTILIZER DEVELOPMENT CENTER, UNIVERSITY OF GEORGIA, UNIVERSITY OF FLORIDA, INTERNATIONAL BENCHMARK SITES NETWORK FOR AGROTECHNOLOGY TRANSFER

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

246

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

CHAPTER ONE . INTRODUCTION A graphics program was written for DSSAT v3 to provide users with the capability to easily plot graphs that are routinely used during the development and validation of crop models. This program, called Graphing Simulated and Experiment Data, or Wingraf, adheres to the file definitions and data formats of DSSAT v3 described in Volume 2-1 (Jones et.al 1994) of this book. It is similar in operation to the graphics package in DSSAT v2.1 (IBSNAT 1989), but with notable functional and operational differences. Functionally, it allows users to plot time series graphs, Y versus X graphs, (such as grain weight vs. biomass), end of season responses (such a as yield vs. irrigation amount), and observed vs. simulation crop performance relationships for validation purposes. Operationally, users can use a mouse or keyboard commands to select variables. They can print the graph or save it to a file, change screen colors and graph scales, and create combinations of graphs that were not possible in v2.1. The basic design of Wingraf is based on a set of codes that are used as headers over each column of data. For example, a simulated results data file may have a column of data with a header LAID, which refers to time-course values of leaf area index (LAI). If there is a corresponding field observation data file, the Wingraf program will search that file for a column of data with LAID as a header. It will then display a plot of LAI vs. time, with simulated data graphed by connecting points and observed data plotted by symbols. If the program does not find LAID in the observed data file, it will just plot simulated results. It can also be used to plot experimental data only. A set of codes for crop, soil, and weather data are included with DSSAT v3 (see Appendix C of Volume 2-1, Jones et al. 1994, of this book for a listing of these codes). Note that these codes (left column) are followed by a short description which is used to label graphs, and a longer description with units. These codes are not rigid. Users may add their own codes and definitions to the file named DATA.CDE (see Appendix C of Volume 2-1, Jones et al. 1994, of this book), and Wingraf will correctly label any data that has this new code as a header. Note, however, that the DSSAT v3 crop models use the codes as defined in Appendix C of Volume 2-1 (Jones et al. 1994) of this book. If other crop models use other codes, this file could be changed accordingly.

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

247

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

248

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

CHAPTER TWO . PROGRAM OVERVIEW GUIDELINES GENERAL

Wingraf was developed to run under the DSSAT v3 Shell (see Volume 1-3, Hunt et al. 1994, of this book) or as a stand-alone program (see note below). It uses TurboVision1 for the user interface routines. The user interfaces with the program via menus and dialog boxes and the program displays information via windows. Wingraf supports the use of a mouse, provided a mouse driver has been loaded prior to the execution of this program. Both mouse and keyboard commands can be used in Wingraf, but the user interface is most easily exploited by the use of the mouse, and as such, examples cited in this Part refer to mouse actions. If using a keyboard, however, nearly all menu choices may be selected by use of the key as well as with the highlighted letter of the menu option. The and keys can be used for moving through choices in dialog boxes. NOTE: When running Wingraf as a stand-alone program, the options to execute the program are as follows: 1. If running Wingraf under the Wingraf program directory, type ÒWINGRAFÓ. 2. If running Wingraf under the data file directory, type Ò\DSSAT3\WINGRAFÓ at the DOS System C> prompt. 3. If the Wingraf program directory is included in the systemÕs PATH, type ÒWINGRAFÓ at the DOS System C> prompt. SCREEN “BUTTONS”

In all Wingraf screens, where multiple buttons are available (e.g., the OK button in Screen 1, on following page, or the PREVIOUS, NEXT, X VARIABLE, GRAPH, RESET, OPTION buttons in Screen 3 in Chapter 3), you may ÒpressÓ these by one of two methods: 1) If using a mouse, click on the button. 2) If using the keyboard, highlight the button using the and keys and then press the key. 1

TurboVision is a registered trademark of Borland International, Inc.

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

249

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

MENU STRUCTURE The Wingraf main menu options are selected by a single click with a mouse on a menu choice, which will either execute an action, present a submenu, or display a dialog box requiring further user input. From the keyboard, use the arrow keys to move through and highlight the main menu items. Press the key when the menu item you wish to open is highlighted. Selecting the ÒºÓ symbol in the upper left corner of the Wingraf main menu display, allows you to exit Wingraf, or alternatively, to display the ÒAboutÓ screen (Screen 1, below). A context-sensitive help function is provided throughout the entire program. The key invokes the help system. - Select Graph Options

[ ]

Exit

About DSSAT Version 3.0 Crop Models Graphics by IBSNAT, 1994 Ok

F1 Help

Esc Escape

X-Var.: Time

Simulation: Default

SCREEN1

H A R D WA R E Wingraf requires a minimum configuration of a 286SX or better processor running EMM386 with expanded memory with a math-coprocessor. DOS version 5.0 or higher is recommended. Wingraf requires 640K of random access memory (RAM), with a minimum of 420K free RAM running under the DSSAT v3 Shell. Wingraf supports most text and graphics display modes, but VGA color is recommended for clarity. In addition, if hardcopy output is needed, a supported printer is required.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

250

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

CHAPTER THREE . EXECUTE PROGRAM Wingraf can be accessed through the DSSAT v3 Shell under three different entry points. To display graphs of measurements made within the growing season (time series graphs) and summary responses, open the Wingraf program under the ShellÕs DATA main menu item. To do this, highlight DATA and then select the ÒX ExperimentÓ option by using the mouse, pressing the key or by moving the highlight bar with the arrow keys to theÓX ExperimentÓ option and pressing the key. From the ÒX ExperimentÓ menu, select the ÒUtilitiesÓ option. A list of three menu options will be presented. Select the ÒG GraphÓ menu option and then select a crop from the window that is presented. The Wingraf main menu screen will be presented (see Screen 2 in Chapter 4). To plot simulated and experimental data, open Wingraf under the ShellÕs MODEL main menu item. Please note that you must first run one of the DSSAT v3 crop models listed under the MODEL menu item before using the Wingraf program or no simulated data will be available for graphing. Wingraf is found in two places under the MODEL main menu item. The first can be found by selecting the ÒO OtherÓ item from the list of options in the pull-down MODEL menu. Select this item and a submenu of various options is presented, including ÒG Graph.Ó Select ÒG GraphÓ to open Wingraf. Alternatively, after selecting one of the crop models in the MODEL pull-down menu, a third tier menu is presented, which includes ÒG Graph.Ó Again, select ÒG GraphÓ to open Wingraf. When ÒG GraphÓ is selected from these selection points, the Wingraf main menu screen is presented (see Screen 2 in Chapter 4). The top line of this screen, with SELECT GRAPH, OPTIONS and EXIT, is the menu bar. Each item in this menu bar has a related pull-down menu. To access these menus, click on the menu item with the mouse and the pull-down menus will be presented. With the keyboard, use the arrow keys to move through the menu bar and the pull-down menus under each will be presented. To select items in these menus, either click on one with the mouse, use the arrow keys to highlight an item in the pull-down menu and press the key or press the first letter of the item. For example, press to open ÒGrowthÓ under the Select Graph menu bar item.

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

251

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

252

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

CHAPTER FOUR . GRAPH MENU Under the SELECT GRAPH menu item are displayed the primary plotting functions in Wingraf (Screen 2, below). Growth, water, nitrogen, diseases and pests, and carbon output files are directly supported and use the DSSAT v3 standard output files, GROWTH.OUT, WATER.OUT, NITROGEN.OUT, PEST.OUT, and CARBON.OUT, respectively. The phosphorus option is included for compatibility with future model outputs. - Select Graph Options

Exit

Growth... Water... Nitrogen... Diseases & Pests... Carbon... User Selected Variables Summary Validation Summary Response...

F1 Help

Esc Escape

X-Var.: Time

Simulation: Default

SCREEN 2.

G R O W T H , W AT E R , N I T R O G E N , P H O S P H O R U S , DISEASES & PESTS, CARBON OPTIONS Selecting one of these options enables the user to plot a graph for the selected function. The screens presented when any one of these options is selected are similar. Thus, the screens for ÒGrowthÓ will be used for illustration. When the ÒGrowthÓoption is selected, Screen 3, on the following page, is presented.

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

253

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

- Select Graph Options Exit [ ] GROWTH

Variables Run Numbers [ ] Leaf number per stem [X] IRRIGATED [ ] Growth stage [X] NON - IRRIGATED [ ] Leaf area index [X] Leaf dry weight (kg/ha) [ ] Stem dry weight (kg/ha) [ ] Grain dry weight (kg/ha) [ ] Root dry weight (kg/ha) [X] Crop dry weight (kg/ha) [ ] Grain number (no/m2) [ ] Grain dry weight (mg/grain) [ ] Harvest index (grain/top) [ ] Pod dry weight (kg/ha) [ ] Pod number (no/m2) [ ] Photo water stress factor (0-1) [ ] Growth Water stress factor (0-1) [ ] Nitrogen stress factor (0-1) Previous F1 Help

Next

Esc Escape

X Variable

Graph

X-Var.: Time

Reset

Option

Simulation: Default

SCREEN 3.

SELECTING PLOTS

In Screen 3, users may select up to 6 plots for each graph. These six plots may be one variable with six runs, six variables with one run, or any combination of variables and runs up to 6. Selecting the RESET button will reset all current selections. In example Screen 3, two variables, ÒLeaf dry weight (kg/ha)Ó and ÒCrop dry weight (kg/ha),Ó have been selected and two runs, ÒIRRIGATEDÓ and ÒNONIRRIGATED.Ó Pressing the GRAPH button displays the graph of these variables and runs (see Screen 4, on following page). NOTE: The OPTION button on the status line in Screen 3 is grayed out and will not be selectable until the first graph has been plotted.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

254

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

10.0k

* 7.5k

* * *

* *

* *

5.0k

o

o

o o

o o

*

*

2.5k

q

+

+

♦ ♦ ♦ + + ♦ * + o ♦ ♦ ♦ + ♦ q

+

+ * ♦

♦ +

+ ( q

*



x o

( ( ( ( (

1.00) 1.00) 1.00) 1.00) 1.00) 1.00)

o q

q

*

Jul 12

q

q

o

0.0k Jun 5

o o

o

q

Aug 18

LEAF WT. kg/ha GRAIN WT. kg/ha BIOMASS kg/ha LEAF WT. kg/ha GRAIN WT. kg/ha BIOMASS kg/ha

-

x

x



x

x

x



Sep 24

♦ Oct 31

IRRIGATED IRRIGATED IRRIGATED NON - IRRIGATED NON - IRRIGATED NON - IRRIGATED

SCREEN 4.

X-VARIABLE

The default setting for graph plotting is the variables selected (for example, those selected in Screen 3) versus time. Users can specify an X-variable other than ÒtimeÓ by pressing the X VARIABLE button (see Screen 3). Screen 5, on the following page, will be presented.

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

255

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

- Select Graph Options Exit [ ] Growth [ ] Select X Variables Variables Run Numbers [ ] Leaf number per stem [ ] IRRIGATED; IRRIGATE ( ) Leaf number per stem [ ] Growth stage [ ] NON-IRRIGATED; NON( ) Growth stage [ ] Leaf area index [ ] IRRIGATD; IRRIGATE ( ) Leaf(kg/ha) area index [ ] Leaf dry weight ( ) Leaf dry weight (kg/ha) [ ] Stem dry weight (kg/ha) ( ) Stem dry weight (kg/ha) [ ] Grain dry weight (kg/ha) ( ) Grain dry weight (kg/ha) [ ] Root dry weight (kg/ha) ( ) Root dry weight (kg/ha) [ ] Crop dry weight ( ) Crop(kg/ha) dry weight (kg/ha) [ ] Grain number (no/m2) ( ) Grain number (no/m2) [ ] Grain dry(weight ) Grain(mg/grain) dry weight (mg/grain) [ ] Harvest index (grain/top) ( ) Harvest index (grain/top) [ ] Pod dry weight ( ) Pod(kg/ha) dry weight (kg/ha) [ ] Pod number (no/m2) ( ) Pod number (no/m2) ( ) stress Photo water [ ] Photo water factorstress (0-1) factor (0-1) ( ) Growth [ ] Growth Water stress water factorstress (0-1) factor (0-1)

Previous

Previous Next Next X Variable

F1 Help Esc Escape

Ok Graph

X-Var.: Time

Esc Reset

Option

Simulation: Default

SCREEN 5.

In Screen 5, the X-variable, ÒCrop dry weight,Ó has been selected. Pressing the OK button in this screen, will display this variable next to ÒX-Var:Ó on the status line in Screen 3. Pressing the GRAPH button in Screen 3 will display this case of Y vs X, as shown in Screen 6, on the following page. To reset the X variable back to time, select the X VARIABLE button again and press the key.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

256

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

3.80k

* *

* 2.85k

*

1.90k

* * * *

0.95k

*

0.00k 0.0k

2.5k

5.0k

7.5k

10.0k

Crop dry weight (kg/ha) o + (

1.00) GRAIN HI. kg/ha - IRRIGATED.COBB

SCREEN 6.

OPTION “BUTTON”

Once a graph has been plotted for selected variables, the OPTION button on the status line (see Screen 3) will no longer be grayed out and will be selectable. Functions under the OPTION button (see Screen 7, on following page) allow a user to make necessary modifications to the current graph. ÒDisplay Graph AgainÓ will display the modified graph again. ÒChange Min/MaxÓ allows the parameters for the X and Y axes to be changed (see Screen 8, on following page).

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

257

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

- Select Graph

Options Exit GROWTH Run Numbers Variables [X] Leaf number per stem [X] IRRIGATED [X] Growth stage [X] NON-IRRIGATED [X] Leaf area index [ ] Leaf dry weight (kg/ha) [ ] Stem dry weight (kg/ha) [ ] Grain dry weight (kg/ha) [ ] Root dry weight (kg/ha) [ ] Crop dry weight (kg/ha) [ ] Grain number (no/m2) [ ] Grain dry weight (mg/grain) [ ] Harvest index (grain/top) [ ] Pod dry weight (kg/ha) Display Graph Again F7 Change Min/Max... [ ] Pod number (no/m2) Modify Multipliers... [ ] Photo water stress factor (0-1) Grid ON F4 [ ] Growth Water stress factor (0-1)

[ ]

Output Graph Print Graph Data

Previous F1 Help

Next

Esc Escape

X Variable

Graph

X-Var.: Time

Reset

F8 F9

Option

Simulation: Default

SCREEN 7.

ÒModify MultipliersÓ allows the user to modify the default multiplication factor for each plot (see Screen 9, on following page). Altering multipliers allows variables of widely disparate scaling to be shown on the same graph. ÒGrid ONÓ toggles the plotting of grid lines On/Off.

- Select Graph

Options Exit GROWTH [ ] Run Numbers Variables [X] Leaf number per stem [X] IRRIGATED [ stage ] Change Min. Max. [X] Growth [X]& NON-IRRIGATED [X] Leaf area index [ ] Leaf dry weight (kg/ha) Minweight X: 160.0000 Max X: 309.0000 [ ] Stem dry (kg/ha) [ ] Grain dry weight (kg/ha) [ ] Root dry (kg/ha) Minweight Y: 16.0000 0.0000 Max Y: [ ] Crop dry weight (kg/ha) [ ] Grain number (no/m2) [ ] Grain dry weight (mg/grain) [ ] Harvest index (grain/top) [ ] Pod dry weight (kg/ha) Esc [ ] Pod number (no/m2) Ok [ ] Photo water stress factor (0-1) [ ] Growth Water stress factor (0-1) Previous

F1 Help

Next

Esc Escape

X Variable

Graph

X-Var.: Time

Reset

ELTER

Option

Simulation: Default

SCREEN 8.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

258

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

- Select Graph

Options Exit GROWTH [ ] Change Multipliers Run Numbers Variables[ ] [X] Leaf number per stem [X] IRRIGATED [X] Growth stage [X] NON-IRRIGATED #1: 1.00 [X] Leaf areaMultiplier index [ ] Leaf dry weight (kg/ha) #2: 1.00 [ ] Stem dry Multiplier weight (kg/ha) [ ] Grain dryMultiplier weight (kg/ha) #3: 1.00 [ ] Root dry weight (kg/ha) #4: 1.00 [ ] Crop dry Multiplier weight (kg/ha) [ ] Grain number (no/m2) #5: 1.00 [ ] Grain dryMultiplier weight (mg/grain) [ ] Harvest index (grain/top) Multiplier #6: 1.00 [ ] Pod dry weight (kg/ha) [ ] Pod number (no/m2) [ ] Photo water stress factor (0-1) Esc Ok [ ] Growth Water stress factor (0-1) Previous

F1 Help

Next

Esc Escape

X Variable

Graph

X-Var.: Time

Reset

ELTER

Option

Simulation: Default

SCREEN 9.

ÒOutput GraphÓ allows the user to output the current graph to either a printer or a disk file (see Screen 10, below).

- Select Graph

Options Exit GROWTH [ ] Run Numbers Variables [X] Leaf number per stem [X] IRRIGATED [X] Growth stage [X] NON - IRRIGATED [X] Leaf area index [ ] LATE SIRS,RAIOUT SHELTER [ ] Leaf dry weight (kg/ha) [ ] Confirm [ ] Stem dry weight (kg/ha) [ ] Grain dry weight (kg/ha) [ ] Root dry weight (kg/ha) Output: Screen Dump [ ] Crop dry weight (kg/ha) Device: HP Laser Jet [ ] Grain number (no/m2) Port: LPT1 [ ] Grain dry weight (mg/grain) [ ] Harvest index (grain/top) [ ] Pod dry weight (kg/ha)Ok Cancel [ ] Pod number (no/m2) [ ] Photo water stress factor (0-1) [ ] Growth Water stress factor (0-1) Previous

F1 Help

Next

Esc Escape

X Variable

Graph

X-Var.: Time

Reset

Option

Simulation: Default

SCREEN 10.

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

259

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

ÒPrint Graph DataÓ allows the user to send the current plot data (and observed data, if present) to the printer or a disk file (see Screen 11, below) in an X-Y format (see Table 1 for an example file of the plot data).

- Select Graph

Options

Exit GROWTH Run Numbers Variables [ ] Leaf number per stem [X] IRRIGATED [ ] Growth stage [X] NON - IRRIGATED [ ] Leaf area index [ ] Print XY Data [ ] Leaf dry weight (kg/ha) [ ] Stem dry weight (kg/ha) [X] Grain dry weight (kg/ha) Print Destination ) Print(kg/ha) data to file [ ] Root dry( weight Print(kg/ha) data to printer [ ] Crop dry(•) weight [ ] Grain number (no/m2) Output File Path C:\WINGRAF\XYOUT.DAT [ ] Grain dry weight (mg/grain) [ ] Harvest index (grain/top) Esc [ ] Pod dry weight (kg/ha) Ok [ ] Pod number (no/m2) [ ] Photo water stress factor (0-1) [ ] Growth Water stress factor (0-1)

[ ]

Previous F1 Help

Next

Esc Escape

X Variable

Graph

X-Var.: Time

Reset



Option

Simulation: Default

SCREEN 11.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

260

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

TABLE 1. EXAMPLE FILE OF SIMULATED AND OBSERVED DATA USED TO PLOT THE GRAPH FOR THE GROWTH VARIABLE, “GRAIN DRY WEIGHT” (GWAD). -------SIMULATED DATA----------------OBSERVED DATA-------@Day GWAD Day GWAD Day GWAD Day GWAD @ X1 Y1 X2 Y2 OX1 OY1 OX2 OY2 166 0.000 166 0.000 194 0.000 194 0.000 169 0.000 169 0.000 201 0.000 201 0.000 172 0.000 172 0.000 208 0.000 208 0.000 175 0.000 175 0.000 215 0.000 215 0.000 178 0.000 178 0.000 222 0.000 222 0.000 181 0.000 181 0.000 229 0.000 229 0.000 184 0.000 184 0.000 236 0.000 236 0.000 187 0.000 187 0.000 243 0.000 243 0.000 190 0.000 190 0.000 250 182.000 250 42.000 193 0.000 193 0.000 257 754.000 257 253.000 196 0.000 196 0.000 264 1912.000 264 471.000 199 0.000 199 0.000 271 2223.000 271 775.000 202 0.000 202 0.000 278 2730.000 278 782.000 205 0.000 205 0.000 285 2913.000 285 1149.000 208 0.000 208 0.000 292 3169.000 292 1206.000 211 0.000 211 0.000 214 0.000 214 0.000 217 0.000 217 0.000 220 0.000 220 0.000 223 0.000 223 0.000 226 0.000 226 0.000 229 0.000 229 0.000 232 0.000 232 0.000 235 0.000 235 0.000 238 0.000 238 0.000 241 0.000 241 0.000 244 0.000 244 0.000 247 29.000 247 29.000 250 142.000 250 128.000 253 323.000 253 261.000 256 580.000 256 418.000 259 938.000 259 556.000 262 1290.000 262 634.000 265 1589.000 265 689.000 268 1870.000 268 779.000 271 2127.000 271 836.000 274 2314.000 274 940.000 277 2549.000 277 1031.000 280 2695.000 280 1070.000 283 2764.000 283 1098.000 286 2836.000 286 1118.000 289 2872.000 289 1129.000 292 2891.000 294 2899.000

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

261

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

U S E R - S E L E C T E D VA R I A B L E S O P T I O N When this option is selected, a submenu with two menu items is presented. These allow you to create a file for graph plotting and to define your own list of variables for graphing. DEFINE

With this menu item, users can create a file for graph plotting provided the file format follows the output file format specified in Part 1 of this Volume (Volume 2-1, Jones et al. 1994). A user-defined file may contain many of the predefined variables in DATA.CDE (see Appendix C of Volume 2-1, Jones et al. 1994). If additional variables are to be plotted, the user may append variable codes and definitions to the DATA.CDE file. USER-SELECTED

With this menu item, users can select their own variables from those found in the GROWTH, WATER, NITROGEN, DISEASES, PESTS, and CARBON output files. When this item is selected, a window similar to Screen 12, below, is presented. Screen 12 is an example screen showing the list of variables for the GROWTH output file. The right-hand lists presents the Wingraf default GROWTH vari- Select Graph Options Exit [ ] User-Selected - (GROWTH) Variables [ ] [ ] [X] [X] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ]

User-Selected [ ] Leaf area index Leaf number per stem [ ] Leaf dry weight (kg/ha) Growth stage [ ] Avg plant transpiriation (mm/d) Leaf area index [ ] Avg evapotranspiriation (mm/d) Leaf dry weight (kg/ha) [ ] Avg potential evapotr (mm/d) Stem dry weight (kg/ha) [ ] P in grain (%) Grain dry weight (kg/ha) [ ] Lable P Pool (kg/ha) Root dry weight (kg/ha) [ ] Active P Pool (kg/ha) Crop dry weight (kg/ha) [ ] Stable P Pool (kg/ha) Grain number (no/m2) [ ] Percent C in leaf (%) [ ] Percent C in stem (%) Grain dry weight (mg/grain) Harvest index (grain/top) Pod dry weight (kg/ha) Pod number (no/m2) Photo water stress factor (0-1) Growth Water stress factor (0-1)

Previous F1 Help

Esc Escape

Next

Ok

X-Var.: Time

Esc

Reset

Simulation: Default

SCREEN 12.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

262

g

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

ables. The list on the left presents GROWTH output variables which the user may select. After defining the variable list, by putting an ÒxÓ beside those variables to be used, users may plot graphs of variables from different variable groups. In this way, key variables from different output files can be displayed simultaneously.

S U M M A R Y V A L I D AT I O N O P T I O N This option allows you to visually compare simulated and measured results for a given experiment. Two options are available for summary validations (Screen 13. below). In each case, the model output file, OVERVIEW.OUT, is used. - Select Graph Options

Exit

Growth... Water... Nitrogen... Phosphorus... Diseases & Pests... Carbon... User Selected Variables Summary Validation Summary Response... Single plotting... Double plotting...

F1 Help

Esc Escape

X-Var.: Time

Simulation: Default

SCREEN 13.

SINGLE PLOTTING

Use ÒSingle PlottingÓ to select one, and only one, of the variables listed when this menu item is selected (see Screen 14, on following page) for simulated versus observed data plotting. Observed data would be those found in FILEA (see Volume 2-1, Jones et al. 1994, for a description of this file) for a particular experiment. For example, FILEA for experiment UFGA8601.SBX, would be file, UFGA8601.SBA. When ÒSingle PlottingÓ is selected, Screen 14 (on following page) is presented. e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

263

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

- Select Graph Options Exit [ ] OVERVIEW Variables ( ) ANTHESIS DATE (dap) ( ) FIRST PEG / POD (dap) ( ) FIRST SEED (dap) ( ) PHYSIOLOGICAL MATURITY (dap) ( ) POD YIELD (kg/ha) ( ) SEED YIELD (kg/ha) ( ) SHELLING PERCENTAGE (%) ( ) WEIGHT PER SEED (g) ( ) SEED NUMBER (SEED/m2) ( ) SEEDS/POD ( ) MAXIMUM LAI (m2/m2) ( ) BIOMASS (kg/ha) AT ANTHESIS ( ) BIOMASS N (kg N/ha) AT ANTHESIS ( ) BIOMASS (kg/ha) AT HARVEST MAT. ( ) STALK (kg/ha) AT HARVEST MAT.

Previous F1 Help

Next

Esc Escape

Graph

Reset

Option

Simulation: Default

SCREEN 14.

In Screen 14, ÒSeed Yield,Ó has been selected as the variable to be plotted for simulated vs. observed (or measured). Pressing the GRAPH button will display this graph, as shown in Screen 15, on following page.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

264

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

16.0k

o

Simulated

12.6k

o

9.2k

o o

5.0k

2.4k 2.4k

5.8k

9.2k

12.6k

16.0k

Measured

SCREEN 15.

DOUBLE PLOTTING

Use ÒDouble PlottingÓ to select only one X and only one Y variable of the variables listed when this menu item is selected (see Screen 16, on following page) for X vs. Y plotting.

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

265

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

- Select Graph Options Exit [ ] SUMMARY X Variables

Y Variables

[ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [X]

[ ] [ ] [ ] [ ] [ ] [ ] [ ] [X] [ ] [ ] [ ] [ ] [ ] [ ] [ ]

Simulation start date (YRDOY) Planting date (YRDOY) Anthesis date (YRDOY) Physical maturity date (YRDOY) Harvest date (YRDOY) Planting material wt (kg dm/ha Tops wt at maturity (kg dm/ha) Yield at maturity (kg dm/ha) Yield at harvest (kg/dm/ha) By-product harvest (kg dm/ha) Wt at maturity (mg dm/unit) Number at maturity (no/m2) Number at maturity (no/unit) Irrigation applications (no) Season irrigation (mm)

Previous F1 Help

Next

Esc Escape

Simulation start date (YRDOY) Planting date (YRDOY) Anthesis date (YRDOY) Physical maturity date (YRDOY) Harvest date (YRDOY) Planting material wt (kg dm/ha Tops wt at maturity (kg dm/ha) Yield at maturity (kg dm/ha) Yield at harvest (kg/dm/ha) By-product harvest (kg dm/ha) Wt at maturity (mg dm/unit) Number at maturity (no/m2) Number at maturity (no/unit) Irrigation applications (no) Season irrigation (mm)

Graph X-Var.: Time

Reset

Option

Simulation: Default

SCREEN 16.

SUMMARY RESPONSE OPTION This option is used for summary graph plotting. Only one X and one Y variable can be selected for graph plotting. When this option is selected, Screen 17 (on following page) is presented.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

266

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

- Select Graph Options Exit [ ] SUMMARY X Variables

Y Variables

[ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [X]

[ ] [ ] [ ] [ ] [ ] [ ] [ ] [X] [ ] [ ] [ ] [ ] [ ] [ ] [ ]

Simulation start date (YRDOY) Planting date (YRDOY) Anthesis date (YRDOY) Physical maturity date (YRDOY) Harvest date (YRDOY) Planting material wt (kg dm/ha Tops wt at maturity (kg dm/ha) Yield at maturity (kg dm/ha) Yield at harvest (kg/dm/ha) By-product harvest (kg dm/ha) Wt at maturity (mg dm/unit) Number at maturity (no/m2) Number at maturity (no/unit) Irrigation applications (no) Season irrigation (mm)

Previous F1 Help

Next

Esc Escape

Simulation start date (YRDOY) Planting date (YRDOY) Anthesis date (YRDOY) Physical maturity date (YRDOY) Harvest date (YRDOY) Planting material wt (kg dm/ha Tops wt at maturity (kg dm/ha) Yield at maturity (kg dm/ha) Yield at harvest (kg/dm/ha) By-product harvest (kg dm/ha) Wt at maturity (mg dm/unit) Number at maturity (no/m2) Number at maturity (no/unit) Irrigation applications (no) Season irrigation (mm)

Graph X-Var.: Time

Reset

Option

Simulation: Default

SCREEN 17.

In Screen 17, ÒSeason irrigationÓ has been selected as the X-variable and ÒYield at maturityÓ as the Y-variable. Pressing the GRAPH button will display this graph, as shown in Screen 18, on following page.

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

267

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

3.75k o

o

o o o

Yield at maturity (kg/ha)

o 3.06k

o 2.38k

1.69k o

1.00k 0.0

86.0

170.0

255.0

340.0

-- o - Simulated Season irrigation

(mm)

SCREEN 18.

In Screen 18, the example graph displays ÒYield at harvestÓ plotted against ÒSeason irrigation.Ó

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

268

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

CHAPTER FIVE . OPTIONS MENU The OPTIONS menu item allows the user to select previously run simulations and to modify the operation, look and feel of Wingraf. The user may define most of the operational parameters, configure Wingraf, and select previous simulations (Screen 15). When the OPTIONS menu item is selected, the pull-down menu shown in Screen 19 (below) is displayed. - Select Graph Options Exit Select Simulation... Colors Directories... Set Graph Options... Select Field Data File... Output Device Options Save Options... F2

F1 Help

Esc Escape

X-Var.: Time

Simulation: Default

SCREEN 19.

S E L E C T S I M U L AT I O N O P T I O N With this option, users can select previously simulated results provided the default output file names have been changed. Selecting this option opens the crop dialog box shown in Screen 20 (on following page).

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

269

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

- Select Graph Options

[ ]

Exit

Select Crop Code

Crop Cassava Dry Bean Maize Millet Peanut Potato Rice Sorghum Soybean Wheat

Ok Esc

SCREEN 20.

If simulations have been run for any of the crops listed in this box and the output file names have been changed from the default names (e.g., from GROWTH.OUT), then selecting one will present a listing of output files. For example, if Soybean is selected from the crop code dialog box in Screen 20, and the output names have been changed, then those files will be displayed. For the UFGA7801-Soybean experiment, these might be, UFGA7801.SBG, UFGA7801.SBW, UFGA7801.SBN for GROWTH.OUT, WATER.OUT, NITROGEN.OUT, respectively. When one of the crops listed is selected and simulations have been run with output names changed, then Screen 21 (on following page) will appear. If no previous simulation results have been saved with the experimentcoded file names described above, a message will appear on the screen to inform the user of this.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

270

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

- Select Graph

Options

Exit

Select Crop Code

Crop Cassava Dry Bean Maize Millet Peanut Potato Rice Sorghum Soybean Wheat

[ ]

Ok Select Simulation Result

Simulation Result

Ok

IUCA7901 UFGA7801

Esc

UFGA7901 UFGA8101 UFGA8501 UFQU7901

F1 Help

Esc Escape

X-Var.: Time

Simulation: Default

SCREEN 21.

In Screen 21, a listing of available simulation results is presented. Any listed simulation may be chosen and then plotted.

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

271

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

COLORS OPTION Colors for both graphics and the desktop may be selected by choosing the Colors menu option (Screen 22, below).

- Select Graph Options Exit Select Simulation... Colors Directories... Set Graph Options... Graph Color... Select Field Data File... Desktop Color... Output Device Options Auto Detect Scheme Save Options... F2

Color Scheme Monochrome Scheme Black/White Scheme Color Setting...

F1 Help

Esc Escape

X-Var.: Time

Simulation: Default

SCREEN 22. GRAPH COLOR

Select ÒGraph ColorÓ to define the colors used for graph plotting, such as graph background and line color. When ÒGraph ColorÓ is selected, a listing of color schemes is presented (see Screen 22, above). Select one of the first four items listed and the graph background and line color will be adjusted to that described in each listing. For example, if ÒAuto Detect SchemeÓ is selected, the program will use its default colors. Or, if ÒBlack/White SchemeÓ is selected, the program will convert colors to black and white. If ÒColor SettingÓ is selected, the user may customize the colors used according to his/her individual preference. When this menu item is selected, Screen 23 (on following page) will be presented.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

272

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

- Select Graph [ ]

Group Background Graph

Options

Exit

Graph Color

Item Colors

Color



Color Color Co Color Color Co

Ok

F1 Help

Esc Escape

X-Var.: Time

Esc

Simulation: Default

SCREEN 23.

DESKTOP COLOR

Use ÒDesktop ColorÓ to customize the desktop color scheme as well as the color setting for individual desktop displays. When ÒDesktop ColorÓ is selected, a screen similar to the one shown in Screen 23 (above) will be presented, in which a user can select colors for background color of the desktop, dialog boxes, menus, the viewer and so on.

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

273

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

DIRECTORIES OPTION This option allows the user to change the default path for graph plotting. When this option is selected, Screen 24, below, is presented. The Graphics Program Path, which can also be changed in Screen 24, will not normally need to be changed. - Select Graph

[ ]

Options Exit

Change Default Data Path

Default Data Path:

C:\DSSAT3\SOYBEAN\



Graphics Program Path:

C:\DSSAT3\SOYBEAN\



Ok

F1 Help

Esc Escape

Esc

X-Var.: Time

Simulation: Default

SCREEN 24.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

274

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

SET GRAPH OPTIONS This option allows the user to specify various graph options as shown in Screen 25, below. -

Select Graph

Options

Exit

Graph Options

[ ]

Experimental data X-Axis Label ( ) Plot ( ) Day of Year ( ) Days after planting ( ) Don't plot ( ) Prompt if available X vs ( ) ( ) ( )

Simulated Data Y Plotting ( ) Plot Connect points ( ) Don't plot Symbols Both symbols & points

Num of Intervals:

4

Ok

F1 Help

Esc Escape

Tics/Interval:

5

Esc

X-Var.: Time

Simulation: Default

SCREEN 25.

Make selections in Screen 25 and then press the OK button to save them. Press the ESC button if you do not wish to save your selections. NOTE: If under the Simulated Data option, ÒDonÕt plotÓ has been selected, then the pull-down menu under the SELECT GRAPH menu item of the Wingraf main menu screen will change as shown in Screen 26, on following page.

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

275

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

-

Options

Select Graph

Exit

Field Data... Summary Response...

F1 Help

Esc Escape

X-Var.: Time

Simulation: Default

SCREEN 26.

When ÒDonÕt plotÓ is selected from the Simulated Data options in Screen 25, you must open the ÒField DataÓ menu item under SELECT GRAPH and select a field data file for graph plotting. When ÒField DataÓ is selected, Screen 27 (below) is presented with a listing of data files available.

-

Options

Select Graph [ ]

Exit

Select Experimental Data File

Data File Name IUCA7901.SBT



Files IUCA7901.SBT UFGA7801.SBT UFGA7901.SBT UFGA8101.SBT UFGA8501.SBT UFQU7901.SBT ..\

Ok

Cancel

C:\DSSAT3\EXPER\SOYBEAN\????????.SBT Apr 13, 1994 10:00am IUCA7901.SBT 14389

F1 Help

Esc Escape

X-Var.: Time

Simulation: Defa

SCREEN 27.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

276

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

OUTPUT DEVICE OPTIONS This option allows the user to configure both screen dump output and plotter/file output When this option is selected, Screen 28 (below) is presented..

- Select Graph Options

Exit

Select Simulation... Colors Directories... Set Graph Options... Select Field Data File... Output Device Options Save Options... F2

Screen Dump Output... File and Plotter Output...

F1 Help

Esc Escape

X-Var.: Time

Simulation: Default

SCREEN 28.

SCREEN DUMP OUTPUT

Use ÒScreen Dump OutputÓ to set up the graph output option as a screen-dump and to select a printer device, printer port, orientation, and other options shown in Screen 29 (on following page).

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

277

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

- Select Graph

Options Exit

[ ]

Screen Dump Options

Printer Driver ( ) Epson MX ( ) Epson LQ ( ) Epson Fx ( ) Toshiba P ( ) HP Laser Jet ( ) HP Ink Jet

Resolution (0-3):

Printer I/O Plot ( ) LPT 1 ( ) LPT 2 ( ) COM 1 ( ) COM 2

Orientation ( ) Portrait ( ) Landscape 1.00

X Multi. ( >=1 ): 1.00

Ok

F1 Help

Esc Escape

Y Multi. ( >=1 ): 1.00

Esc

X-Var.: Time

Simulation: Default

SCREEN 29. FILE

AND

PLOTTER OUTPUT

Use ÒFile and Plotter OutputÓ to select the graph output option to file output or to both plotter output and file output (see Screen 30, below). The output file can be in either HPGL or Postscript format. The graph file can be imported into other graphic editors, word processing program or drawing programs for further modification. -

Select Graph [ ]

Options

Exit

Plotter/File Output Options

Plotter Type ( ) HPGL ( ) Postscript

Orientation ( ) Portrait ( ) Landscape

Plotter Com Port ( ) COM1 ( ) COM2

Plotter Output Option ( ) Both Plotter & File ( ) File Output Only

File Name: C:\DSSAT3\SOYBEAN\OUTPUT00.GRA

Ok

Esc

SCREEN 30.

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

278

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

S AV E G R A P H O P T I O N S Changes made with the ÒSet Graph OptionsÓ or ÒSave OptionsÓ menu items under OPTIONS in the Wingraf main menu saves selected configurations to the file called GRAPH.INI. Normally, Wingraf configuration data will be handled and updated through the Wingraf menu structure. You may wish, however, to edit GRAPH.INI with a text editor. Thus, a listing of the contents of GRAPH.INI which pertains to Wingraf is shown in Table 2. Two sections of GRAPH.INI hold configuration data for Wingraf and for the default output device. Under the [WINGRAF] section of the GRAPH.INI file, defaults for plotting in Wingraf are defined. Specifically, they are: gcolor0 to gcolor7: interval: tics: days: symbols: thickness: plot: exp: ÔPÕ for

Refer to the default color palette for plotting. Number of major divisions on the X and Y axis. Number of tic marks between the major divisions. ÔDÕ for day after planting date; ÔYÕ for day of year. ÔCÕ for connect symbols with lines; ÔSÕ for plotting. symbols alone; or ÒBÓ for both symbols and lines. ÔTÕ for thick lines; ÔNÕ for normal width lines ÔPÕ for plot simulated data; ÔDÕ for donÕt plot simulated data. ÔAÕ for always plot experimental data; ÔNÕ for never plot; or prompt when data are available.

Under the [Device] section of the INI file, defaults for the selected output device in Wingraf are defined. Specifically, they are: output: file driver: for Jet. plotter: port: orientation: resolution: xmult: ymult: file:

ÔSÕ for screen Dump; ÔPÕ for plotter and file output; or ÔFÕ for alone. Ò0Ó for Epson MX; Ò1Ó for Epson LQ; Ò2Ó for Epson FX; Ò3Ó Toshiba P; Ò4Ó for HP Laser Jet; or Ò5Ó for HP Ink Ò0Ó for HPGL or Ò1Ó for Postscript. Ò0Ó for LPT1; Ò1Ó for LPT2; Ò2Ó for COM1; or Ò3Ó for COM2. Ò0Ó for Portrait or Ò1Ó for Landscape. Resolution. X-multiplier. Y-multiplier. Name for file output.

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

279

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

TABLE 2.

EXAMPLE

OF A

WINGRAF GRAPH.INI FILE.

[WINGRAF] gcolor0=1 gcolor1=15 gcolor2=14 gcolor3=12 gcolor4=15 gcolor5=10 gcolor6=11 gcolor7=13 interval=4 tics=5 days=Y symbols=B thickness=T plot=P exp=N [Device] output=F driver=1 plotter=1 port=2 orientation=0 resolution=1.00 xmult=1.00 ymult=1.00 file=C:\WINGRAF\OUTPUT00.GRA

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

280

Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and

REFERENCES Hunt, L.A., J.W. Jones, P.K. Thornton, G. Hoogenboom, D.T. Imamura, G.Y. Tsuji and U. Singh. 1994. Accessing data, models and application programs. In: Tsuji, G.Y., G. Uehara and S. Balas (eds.). DSSAT v3. Vol. 1-3. University of Hawaii, Honolulu, HI. International Benchmark Sites Network for Agrotechnology Transfer Project. 1989. Decision Support System for Agrotechnology Transfer Version 2.1 (DSSAT V2.1). Dept. Agronomy and Soil Sci.; College of Trop. Agr. and Human Resources; University of Hawaii; Honolulu, HI. Jones, J.W., L.A. Hunt, G. Hoogenboom, D.C. Godwin, U. Singh, G.Y. Tsuji, N. Pickering, P.K. Thornton, W.T. Bowen, K.J. Boote and J.T. Ritchie. 1994. Input and output files. In: Tsuji, G.Y., G. Uehara and S. Balas (eds). DSSAT v3. Vol. 2-1. University of Hawaii, Honolulu, HI.

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

281

Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data ¥ Graphing Simulated and Experiment Data

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

282

NOTES :

e 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

283

DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3, Volume 2 ¥ DSSAT v3,

284